Very easy to load. Controls are easy to read. Very quiet operating and does an excellent job cleaning utensils and all pot and pans. Have used for 8 years with no issues.

Ive been battling this dishwasher since it arrived 9 years-ago. It was a warranty replacement we were stuck with from GE. Plus, we paid $300. We could never get it to clean dishes, no matter how we loaded it or what we used, so we gave up and hand washed dishes for years. This year, I am committed to getting the dishwasher working because of hand eczema. I took it apart and cleaned the sprayer arms, filter & wiped it down completely. I also ran a dishwasher cleaner through it. I finally got it to clean dishes, but only if they are thoroughly rinsed first and on the Pots/Pans setting. After a month, it stopped cleaning my dishes again. I took apart the dishwasher again, and cleaned everything. Now, glasses on the upper rack in the back are not all getting clean. I never overload it. Im convinced that GE Dishwashers are just junk. Someday, Id love to find a dishwasher that actually works. :-( Frustrated!!!

After a short four year history of not cleaning our dishes well, our four-year old GE Profile Quiet Power 6 QP6, model PDW9280N00SS, s/n-VM819634B, overheated and did not shut off and melted everything plastic inside. The house now has a horrible smell of burnt plastic. Ill start the process tomorrow of contacting the insurance company and looking to get this odor out of our home and a different brand of dishwasher into our home.

The microwave oven that I’ve been using works real well and it’s not that expensive. It’s also a convection oven at the same time. The only reason I didn’t give it a 5 is, I rarely give that high # to anything with rare exceptions.

The dishwasher is new and looks great. However the dishes are not getting clean. After washing with a 200+ minute wash cycle utensils are still dirty and food particles are left on plates and bowls. This is occurring even with a good rinse prior to placing them into the dishwasher. I clean out the food particles filter after every two loads, makes no difference. Also the water bottle jets are a nice idea but water bottles are too tall to fit even with the third rack removed. I am very displeased with my purchase. This was not an inexpensive model.

Model #JVM1790SK01. High end GE Profile microwave/convection oven. Purchased and installed in 2009. First off the exhaust fan is terrible and is very noisy. The product itself worked well until recently when now the microwave heats intermittently, one time it will come on and heat, next time nothing. The fan runs, but no heating. The truly frustrating part is I need the front venting and no other units have the vents that blow the air outward, all the new units blow the air straight up your cabinets. Certainly a high end unit should last longer than 5 years with only two adults using it now and then. The cost of the service is outrageous and I surely would not use the $100 rebate on another GE product if they do not last any better than this one.

Absolutely silent! Several features and cycles such as crystal, normal, pots and pans and drying options such as air dry or heat dry. Standard size dishwasher. The key is in the loader. Stainless steel with no handle or anything plastic. Flush. Stainless interior as well. It did have a food disposal but to avoid smells since we start the dishwasher only twice a week, we rinsed off our dishes. Another important element we learned from the previous dishwasher is to use the heat dry if you want your load to be dry with as little puddles of water as possible.

No matter what it is whether it's a GE hot water heater, an iPhone, a car or a frozen TV dinner, you're going to find someone that had a bad experience. After a day of rain eight years after I put in my Home Depot GE hot water heater, the pilot was out. I don't know if it was wet in there or what but it took me 10 hours of repeated attempts and while I was searching online for answers and deals on replacing it, I kept trying. And tonight at 10:30 PM I didn't bugger about, I just held down the pilot for one minute, and then once the pilot remained lit on its own, as fast as I could I turned the thermostat to medium high and kaboom it lit up wonderfully. Maybe it dried out but I would not say that GE water heaters are a piece of Home Depot junk. As I said earlier I installed mine eight years ago and it has never had a problem and since tonight it restarted and I checked the tap and now have hot water. I suspect it will be fine but if I need a new one, eight years hasn't been a bad run. Just follow the instructions very carefully and repeat and repeat and repeat. Good luck.

GE had recalls on models 8500 and 8700 due to the motor catching fire but not my 8600 which is right in between. So besides it being the worst working dishwasher weve owned by not even cleaning well, the unit catches fire and almost burns my house down and GE wants to give me a credit toward buying another fire trap as opposed to replacing it because its 5 years old. I expect appliances to last more than 5 years and not catch on fire. No more GEs for me!

I also have a GE Profile dishwasher with malfunctioning wheels. I read this site, and was comforted and enraged that I was not alone with my melting wheels. I sent GE customer service a note, explaining my problem. I also included a link to this site in my note. I explained that I was a loyal GE customer and that they should stand behind their products although my unit was no longer covered under warranty and did not qualify for the recall. GE responded to my e-mail with in 12 hours. They sent me a complete set of new wheels for my bottom rack free of charge, and sent out a technician to install them, again free of charge. They also e-mailed me to make sure I was happy and no longer had concerns. I am thrilled with my experience. Let me say that again I e-mailed GE and within 8 days (a holiday included), I had new wheels and a technician to install them at no charge.

We have had our GE Advantium for 4+ years and the paint has started to peel off the inside of the door. We have an extended warranty with Home Depot but they deem this a cosmetic issue which is not covered. The cost to replace the door (part only) is about $260. Not sure self-painting is safe. I read here that we are not alone in GE microwave paint peeling off inside their microwaves, in general. Has there been any recall or calls action against them for this shoddy product? We love having this microwave/oven but feel like we got hosed by GE and Home Depot.

Remodeled our kitchen back 6-7 years ago and bought GE Profile appliances from Home Depot... bad mistake. The microwave/convection oven came as one unit and now due to paint peeling on the microwave interior - inside top and sides we need to replace the entire unit to the tune of $2,500 plus. I called Home Depot and asked if there was a government mandated recall on the item... and they asked if we purchased the extended warranty. What? Does anyone know of a recall or class action suit on the following item: GE Profile Model: PT970SMISS. Manufactured December 2007.

Microwave Model HVM1540LP1CS... This microwave was installed 6 years ago when I built my home. I live by myself and the microwave has only been used by me. I loved this microwave until suddenly it began to turn on by itself and I would often hear popping noises. I looked up reviews of this GE microwave and found that this is a frequent problem with GE microwaves. Fires were reported in a couple of reviews so I immediately unplugged mine, as a safety precaution. If this happens frequently with these microwaves, why isnt GE replacing the parts for the defective machines since they can be fire hazards?

This unit was purchased at Lowes on 11/22/16 and installed by our plumber shortly thereafter. Its not even 6 months old! It was poor at drying at first and then stopped drying altogether about a month ago. The GE Customer Service has sent a repairman here on 4 occasions in the past few weeks, sent faulty parts, including an element and a board (Im guessing that they mean a motherboard) but it is still swimming in water. Ive asked them to replace the dishwasher, to which they have refused. Yes we are irate, and rightly so. Whatever happened to quality manufacturing and decent customer service? I will never buy another GE product again. There should be lemon laws for appliances.Now we are being informed that the parts are back ordered until September, but that they might be able to get them from California on or about the 25th. Their apologies mean nothing when they do not back it up by amending the situation in an appropriate manner. By the way it takes 256 minutes for a full cycle. The plus side is that it is very quiet, but Im not sure how energy efficient a dishwasher can be that runs that blasted long. It doesnt clean very well either. If considering the dishwasher or another appliance, stay away from GE Is our recommendation.

We sent the rebate form in, and they denied our claim. It was for a dishwasher that was recalled. We had to buy another one and only received $100 for the rebate after having to spend $500 on a dishwasher, but the rebate was denied! Unbelievable. We have written GE and the FTC with no response.

Installed by builder of home. Mid level SS model, very quiet. Does not dry dishes completely. LED lights on control panel remain on indicating cycle even when finished.

Bought a GE microwave and it broke 1 year and 1 month after I bought it, called and found out it would cost more to fix than to buy a new one. After reading other peoples report on how GE treated them on their problem, I will not buy GE anymore.

This dryer replaced an eight year old Frigidaire Gallery Series. The new GE dryer is drying clothes much quicker. I have read some reviews complaining of the buzzer, but it is a nice feature to know when the cycle is about to complete. The nice thing about this dryer is that it has the right amount of dial drying features needed without a bunch of electronics that can typically cost a big service call if gone bad. Also the bottom rear of the dryer allowed enough room for the exhaust to go either left or right behind the dryer with it still sitting close to the back wall. I was lucky to find this as an open box item returned to the store because it was not a gas dryer for the first buyer. Photo shows exhaust located to outside wall.

Great microwave when the thermostats are working. Have gone through 4 in 2 years. I have convection/microwave. This is a great oven, and microwave. The failing parts should be something GE corrects. Service contract was purchased after 2nd needed repair. Their contracted service was awful. No communication, mis-scheduling, unavailable parts, Poor customer service. Have officially requested with GE not to have this contractor assigned to correct any problems in the future.

I have a General Electric HVM1540DN1WW over the stove microwave that I have had. This month will be a year and a half. The oven stopped heating so being a DIY person, I pulled the oven out and took it to my workshop to see if it was something I could repair. Inside the front panel was a very helpful schematic of the whole oven. Using the troubleshooting step listed on the paper, I found that the Magnetron tube had gone out. So I went to my owners manual and found that the tube had a four-year warranty on it so I called General Electric consumer relations to have the part replaced. First I had to fight with them because they said it was only covered for a year. After about an hour and a half on the phone and giving her the publication number on the manual, she agreed that it was indeed covered for four years. So she said that she would replace the part and she would even send a technician out to install it at no charge. I was very happy at this point. She said that she would ship the part to me next day with UPS and the tech would be out the following day to replace it. So far so good, till the next day when the part did not arrive. I called back in to General Electric consumer relations and spoke with a man this time and he told me that she had canceled the order that is why I did not receive it, and he couldnt see why. So he looked at the comments she had made the day before and did see that she said she would replace it and send a tech. The tech was supposed to be here the next day and I had no part for him to install. The man said he would place the order and have it shipped to me by the next day no later than 10 a.m. and the tech would be here between 1 to 5 p.m. Great! Until the next day and again no part when they said it would be there. Again with the call only to find out that it was scheduled to arrive next day guaranteed by 7 p.m. The tech is supposed to be there with in the next few hours and I wouldnt have the part. I called Fed-Ex and sweet-talked the lady into getting a hold of her driver to see if she could get to me ASAP. Bingo, next thing you know I have the part, the tech calls and the part is replaced. Oh boy, the big gaping hole above my stove is finally going to be filled once again. (I promise I am coming to the end.) After reinstalling the oven, I found out that it was taking longer to heat than when I got it, and it has a brand new Magnetron in it.Again with the call to General Electric consumer relations to set up another tech to come out and check it out. So the following day, the same tech arrives and puts a cup of just barely cool water in it and puts it in for 30 seconds, pulls the water out and says it is working just like it is supposed to and leaves. Well, again I called General Electric consumer relations to let them know what has transpired, but this time I asked to speak with someone higher up the food chain. I then spoke to a lady and she said that she would set up another tech to come out and check it out, and if it resulted in the same way that she would replace the unit with a new one. The following day, the same tech calls me and said that the oven is working the best that it could so I should call back to consumer relations as he did and set it up for a new one to be sent in its place. So I called once again and was not able to speak with the same lady and the only thing she could do is send me a voucher for $250 laying around for a new oven, but I would have to purchase one and send the voucher in with the receipt to get a refund. I told her that I did not have a spare $250 dollars around to go buy a new oven and then wait for the refund to get to me. So I asked that she have the lady that said she would replace it to call me back to straighten this problem out. Finally the following week, the lady calls me back and said, This is the best that I can do, due to me voiding the warranty. I asked, What? She said that the tech that spoke with me said that because I had hard wired in the unit to the house wiring, it was receiving low voltage so she couldnt do any better than that. I told her that was the most asinine comment I have ever heard coming from a field tech and asked her whether he went to a school backyard Techs-r-Us. I asked if she would have the tech call me to explain. I also gave her some friendly advice that she should not use that comment to anyone else for fear of someone laughing at her. We agreed to have the voucher sent if that was the best she could do. I will not buy another GE appliance again! I have purposely not mentioned anyones name because it was the experience, not the person that I spoke with.

Since 2010, our 2006 GE 1.1 cu. ft. countertop microwave oven model # JES1136WL has had power failure problems. It began in our previous home and now in our next home. All of a sudden, Id check the panel and it would say PF, which means power failure. So, Id reset the clock and there it is, ready for the next usage. Over a year later, in our new home, as of yesterday, it will start and immediately cut off. Now, weve been using this microwave in the same plug since May and now its October. So, what happened? Today, Im looking for the users manual and have located it online. But it appears that the PDF GE has for it, the Adobe document, has a problem. So, Im going to check it on my laptop, as this is my PC. Thank God we only paid under $100 for it. On some of these consumer complaint stories, the person paid a great deal for theirs.

The key pad says it is shorted out and needs service. It turns on randomly. I unplug it and plug it back in and it will either say service needed, keypad shorted out’ or press clock .I dont use it much for microwave cooking. It came with the house we just bought and it only worked for 3 weeks before it started this mess. I could deal with it if it didnt beep all the time.

At least 3 times, with different people in our household, our microwave has started on its own. It was plugged in but with no input from anyone. We checked the website and no recall. Microwave just out of warranty. This was a disaster in the making. We took it as a sign to discard this appliance. GE NO MORE!

I have had a fridge, a washer and a microwave oven from GE. I have been so disappointed in all three, but the microwave oven disappointed me the most. The door broke around the handle and the hinges, and was replaced shortly after buying it. Then it broke again and I replaced it myself. Then it broke again. This makes me not want to try another GE product. The fridge shelves all broke because they were plastic. The washer fell apart shortly after a year. It is just myself and my husband using them, so they should last for years. When you buy large item, you would like them to last a long while.

We purchased the suite of Cafe appliances. After one year of service, out of warranty of course, the touch pad on the microwave quite working. The touch pad on the dishwasher has several lights that do not work. These products are insanely inferior. If you are considering purchasing, I would buy anything but GE.

GE Profile Microwave/Convection Oven JVM1790WK, over the range unit, CAUGHT ON FIRE while microwaving water for coffee. One of the four prongs that holds the oven grid in place started flaming wildly and smoking after about one minute of microwaving. My whole kitchen has an acrid awful burning smell. This is my second unit for a small kitchen, and I will be lost without this. The first one I had the handle fell off. This one is too dangerous to use. These units cost $600!!! I cannot afford to replace one every few years. Maybe this model and brand is bad news?

I purchased this dishwasher 2 months ago and am VERY disappointed with its performance. For an appliance that claims energy efficiency it is a total failure. My last dishwasher was a Kenmore that I had for 15 years. It outperformed this thing in every aspect. Since purchasing this dishwasher my water bill has gone up and my energy consumption has gone up. Why? Because I cannot put plates close together in this energy hog or they will not get clean. I have to do twice as many washings as I used to for the same results. This piece of junk has NO WASH PRESSURE! All the dishes must be pre-washed in the sink to assure satisfactory results AND I must use the hot water boost or they will not get clean. Energy wasted doing a pre-clean and energy wasted with hot water boost - bad combination! This product is taking me backwards in savings and environmental damage.

Have to rinse dishes clean before I put them in. Otherwise they will not get clean. Does as well as most other dishwashers- until you get into the very upper end ones. The racks are good size. The outside is nice looking.

Excellent. The dishwasher cleans dirty dishes and dries them as I expect. We use all the features periodically, usually the RINSE & Normal wash daily. We rarely use the China setting, but we do use the pots and pans and hygienic features as well. We also occasionally use the delayed start feature. Our dishwasher is a decent size four our family for daily use and for large get-togethers. Our house came with a WHITE dishwasher, which were not totally fond of as a personal preference, BUT, its LOOK and design are fine by our standards. We have had a problem with the door catching on the screw that holds the dishwasher in the cabinet. Seems like a simple fix, but it hasnt been. Id like to see that problem go away for any dishwasher installation.

The microwave overall is good. It looks very good. I think that the price was good as well. I would certainly recommend this item as an item to buy. So far it appears to be well built, I have not had any problems with it.

After one repair to my 9 year old microwave we decided to replace it. I am so sorry I did! The old microwave had a stainless steel kit and was made with quality. The replacement is a piece of junk! The outer kit is plastic and shows fingerprints like crazy as well as the microwave itself! Im always wiping it off. The flimsy door button is impossible to open without pushing it ten times in the right spot! The door doesnt close easily either! The front of the microwave is warped and wavy! I hate it! The quality of your microwaves has dropped to zero!

We have GE Profile Quietpower 6 Dishwasher. We are the second owners of the home and did not buy it ourselves. But the dishwasher is no more than 3 years old. Our dishwasher also refused to turn off after it was done washing dishes, usually humming for hours afterward. One day, we came home and found that the whole house smelt of burnt plastic. Our dishwasher was burning hot and full of burnt plastic. It was off, so we unplugged it to make sure it would cool down. We dont expect any help from GE, but we will never buy GE ourselves. And we will make sure to tell our friends to never buy GE.

After about 5 months of owning the unit (GE dishwasher model GDT580SGFBB), the door latch sensor became defective and discontinued the wash cycle up to 6 times every use. I contacted the GE warranty department. Their consumer relations advocates treated me as subhuman. I never felt like a valued customer, my concerns and my time were never a priority. Instead I became a part of their research and development program while beta testing a defective product.After 6 months of futile repairs requiring multiple technician visits I was exasperated. I had submitted 4 separate warranty claims that often were mysteriously closed without my knowledge. I finally contacted the original retailer, Home Depot, and shared my experience. They catered to me even though it was well past the 90-day store policy. They gave me a credit for the purchase price so I could choose a replacement. Since I dont want to touch another GE appliance with a 10-ft pole, I chose another brand. Shortly thereafter I received a call from GEs Escalated Issues department offering to replace the unit. Evidently that lit a fire under them. But it was too late, my patience with GE has been exhausted. If this is the way GE wants to run their business, then it will be a fast-track way to dig their own grave.

We just had a Fire in our GE Microwave, Model # JVM1750SP1SS. Manufactured in August 2010. Purchased at Home Depot in December 2010 and installed January 2011. The right rear shelf hook caught fire while the microwave was in use. Luckily, we saw it in time... We are not sure who to complain to or tell about this. We went on GE.com to inform them of this issue and am waiting for a response. I see here that I am not alone. There is other info being shared on YouTube about this issue as well. GE better make good on this for me. Now I have to find my paperwork... Figure out who will remove this under cabinet installed oven and replace it. I am probably on my own here as it is 3 years old!!

GE Stainless Steel Profile Dishwasher - My dishwasher is about 5 years old. Two years ago, we noticed that the gaskets, both around the tub and on the bottom of the door, were becoming gummy and rippling. We were hoping to make it another couple of years before buying a new dishwasher, but a couple of week ago, the top arm fell off because the gasket was so degraded. We ordered the appropriate parts and were only able to replace the top-arm gasket and the tub gasket. We had to call an authorized GE repairman, specifically RC Appliance in Sparks, NV. When he tried to get the gasket out, his hands turned black from the rubber. After about an hour of trying to get the new gasket installed, he had to use his pliers to crimp the gasket in place leaving large dents along the bottom edge of the door. He said the factory had crimped the old gasket in place at the factory from the other side. I am extremely unhappy about the workmanship and the fact that the gaskets did not last a reasonable time. I dont want to seek an attorney, but would rather GE contact me to discuss what must be done.

Purchased the Maytag MDB7749SBM stainless steel dishwasher in December 2013. The dishwasher and install totaled $700, which for that price and with Maytags past reputation, I wrongly assumed that the dishwasher would last a long time. In May 2016, slightly over 2 years, the dishwasher started having issues with the control panel. The control lock would randomly activate. I would have to reset the circuit breaker daily, leaving it off for around 10 minutes. Even with trying to go through all the steps to resolve the issue, resetting it from the circuit breaker, sequence on the control panel, the dishwasher wouldnt work. I called Maytag and after 40 minutes on hold, they finally answered. They wanted $89 for a service call and for the $143 part, plus labor. Might as well just replace it with another brand like GE, or Samsung.

Sometime in the 1970s, my mother bought all new GE appliances; a refrigerator, a kitchen range-microwave combo and a dishwasher. After her death my husband and I moved into her house and continued to use these appliances until 2007. The refrigerator and dishwasher are still going strong as of now... October 2014. The refrigerator only needed the drainage line cleaned. The range began to have some electrical shortage problems and rather than try to repair (which is what we should have done with both appliances), we decided to replace the refrigerator and range/microwave. We bought new GE appliances; a GE refrigerator (my brother put the old one in his shop), GE microwave and GE range. The new refrigerators icemaker would not work property when we got it and the microwave (Model #JVM2070SK02) quit early this year (big difference in the old microwave at 30 some years use and my new one at only 7 years use). Because my husband was diagnosed with a brain tumor and I was the only caretaker, I was not able to address the malfunctioning icemaker immediately. In fact, because of my husbands hospitalization, I wasnt even at home during that year enough to use the icemaker. WOW! What a ripoff GE is selling to consumers. My complaints wont solve my problems nor the problems experienced by other people who bought these defective appliances but it helps to vent my anger. Just recently a small leak in the waste-water drain hose (easy to replace) sent me scurrying to find a new dishwasher but when considering the replacement of my 1970s dishwasher and the reliability of my newer appliances, I decided that my 1970s dishwasher will outlast anything I could replace it with. So I decided to replace the waste-water drain hose myself.What a sad appliance market we have in the US when buyers have to replace newly purchased appliances anywhere from a few days to a few short years after purchase. I think appliance companies intentionally produce inferior, unfixable products so consumers will replace their inferior ones with new inferior models thus keeping up sales. Do we have a choice? I lived before dishwashers and microwaves and I can live without either now. I would prefer not to go back to wood cook-stove and an icebox but I may not have a choice (I actually have an icebox if needed). Is there any way to hold companies responsible for the products they produce? If anyone out there has had longevity of 10 years or more use from a newer appliance line, that is appliances made since 2000... Please share the producers name with rest of us. GE isnt what it used to be and neither are many other US brand name appliances.

While the microwave works fine, as far as microwaves go; it does heat unevenly but eventually gets the job done, the interior is cracked and shows signs of rust and deterioration. I dont remember ever seeing this on in previously owned microwaves. I would only use it for basic heating and reheating.

When we purchased our home it came with GE appliances which was covered under a one-year warranty. My microwave has been broken for nearly 3 months. It is almost impossible to get a service tech to come out immediately. GE customer service is the worst I have ever dealt with. They are unprofessional and unreliable. Most of all uneducated about their job. If I could return all of the items in my house that were made by GE back to the seller I would in a heartbeat. The Appliances are poorly made and the customer service is too difficult to deal with it. It’s not worth the money or the Headache... Stay away from GE appliances.

We purchased a Profile Dishwasher, Stove, Oven and Microwave. So far weve had problems with all products especially the dishwasher. The bottom of the dishwasher is filled with water, the door has water running down the front and all dishes have to be dried. I have talked to GE and I was told the new models do not have a drying system as in the past due to EPA. I feel like we have spent thousands of dollars for items that are trash. Had I known I would be drying dishes I would never bought GE products. I would trade this GE for a SEARS in a minute but too late. Ill keep calling GE office, maybe a miracle will occur. Ive tried all the tricks in the handbook... doesnt work.

I bought this microwave about 2 years ago (2011). Yesterday the microwave turned on by itself, I tried to stop it by hitting the clear button that didnt work so I had to unplug it. When I plugged it back in it seemed ok so I reset the clock but within minutes it started again, this time the key pad read key pad short-circuit and then went blank. I am glad I was home when it happened. I am now wondering if I should repair it or replace it.

We moved in a newly built home and resided in this home for three years. The house came equipped with a GE Microwave: Model: JNM1541DM5BB, Serial: ZZ 201867 L. While in the house the microwave came on by itself with flames coming from the center of the unit. The plastic in the center of the unit was on fire. Had I not been home at the time this took place, I would not have a home to live in today. A review of the construction of this product is needed. An investigation to the cause of this mishap is needed.

I bough a GE microwave oven, model JVM1740SM1SS, less than 2 years ago. The keypad says that it is shorted out and needs service. It turns on randomly. I unplugged it and plugged it back in, and it will either say, service needed, keypad shorted out or press clock.GE has so many complaints about there microwaves, some that are very serious. They still claim that there are no problems with them. They have to know there are problems, but do not want to issue a recall and take a financial lose. Its only a matter of time, before something so serious happens that it will be a bigger financial lose than a recall.

GE over the range microwave JVM1540DP1WW - Within 1 year, the magnetron failed. I called the Sears service department to fix it. Because of that, I bought 2 more years of extended warranty. Three months after that, the microwave turned on by itself for 1 minute nonstop. I had to unplug it and call the service again. It would also turn on even when the door is open. Its very dangerous for microwave exposure!

Just bought a Monogram dishwasher one week ago, and the front sound barrier fell off. The service man came out, took a look, and said it was not a big deal. I questioned him why it fell off within such a short period. He stated that it was GEs policy: to make Monogram quieter than competitors, they put in sound barrier in front. However, it fell off often. Since it does not affect how the dishwasher work, GE does not believe that it is a big deal. Therefore, no need for quality control, and he will use new glue to glue it back. No guarantee that it will not fall off later... What is GE stand on the engineering products any more? Will never buy any more GE product...

Bought GE range microwave JVM3160DF3BB11/16 from Lowes. Tripped the breaker. Replaced the breaker with a new. Would immediately trip the breaker as soon as you pushed the start button. Last time it tripped the breaker oven went dead. Wont even light up. Junk. Do not buy made by Haier in China with the GE name on it.

Three years ago, we remodeled our kitchen and replaced all our appliances with GE Profile Stainless Steel appliances, stove, refrigerator, and dishwasher. Two months ago, the dishwasher, model PDWT580R10SS, stopped working. It was out of warranty, but the store where we purchased it said to call GE consumer service to see what they could do. They said that they would replace the parts for free if we paid for service. They said they would send a GE certified service tech to fix it. The two people they sent were dumb as a brick and after tearing apart the door, they decided that the controller board was bad and sent for a replacement. Two weeks later, they installed the new controller board and it still didnt work. They called GE and were walked through a troubleshooting guide and it was determined that the touchpad was bad. They ordered a touch pad and two weeks later, they arrived to install it and asked where the part was. According to them, it was sent to me and was at the post office, which it was not. They then asked to be paid for the three calls and I told them I do not pay for incompetence and would pay them when the appliance was fixed. Turns out, they gave GE the wrong address (their store) for the part and it was sent back. I called GE Consumer Service and talked to my rep who said she would send the part directly to me and that the service rep refused to work with me again and I should contact another service organization. The part came and it was not a touch pad, even though the packing list said touch pad. I called the GE rep, who is now a good friend and she said she would contact the store where we purchased the dishwasher and have them fix it as long as I paid for the parts. It is now two weeks since they arrived and diagnosed the problem. I just called the store and they said the part was backordered for another week. It will be close to three months before the dishwasher will be fixed if it can be. DO NOT, UNDER ANY CIRCUMSTANCES PURCHASE A GE APPLIANCE.

JVM6175SFSS - I purchased this over the stove Micro in July 2014. When I cooked a potato or frozen meal it would sound like it was going to explode. Condensation drips down behind my stove and the window and door to it get all steamed up. The fan clears the door & window but is very loud and intrusive even on low. Besides that I have never needed to use a fan when I use the microwave. GE repair came and said there was nothing wrong with it. But after thinking about it, came back the next day and took it apart. The tech called GE engineers and described to their amazement the way the inside was made. They said no way. So the tech took pictures and emailed them to GE. They reviewed it and said thats the way it is. I wouldnt stand for that and called them again and told them that the bottom of the micro gets scalding hot. At that they changed it out.... for another one with the same problem. The wall behind the stove is getting ruined from vapor dripping and all the same problems exist. They will be coming again and I am going to insist they take back their junker and let me buy a safe microwave of another brand even though my other appliances match. I am sorry now that I bought my GE stove and refrigerator now because they match the micro.

I rarely use it. I know to avoid too close to the signals produced in the microwave and use it only about once a month.

Our GE Cafe Appliance package is less than 1year old and the convection/microwave door handle is wrinkling and peeling. I realize that weight may be a concern hence the plastic vs. metal handle due to the side hinge of micro but aluminum or other light metal would have made more sense. A service tech is coming out next week to replace the in warranty handle however this cost will be our responsible next year when this happens again. A light metal retrofit/recall seems to be the logical solution to remain customer centric and maintain GE loyalty. How this material choice error is handled by GE to ensure this problem does not repeat during the life of this appliance defines brand loyalty. Thank you for your consideration.

We bought 3 GE Profile appliances in 2005 when we renovated our kitchen. We have not had much problem with the gas oven/range/stove. We have, however, had nothing but problems with the microwave (which I submitted a separate review for) and the dishwasher. Recently, a friend made some suggestions regarding the dishwasher. I then went online and watched some tutorials on troubleshooting my dishwasher problems. I tried all the new suggestions and the dishwasher worked OK the one or two times after that and then back to all the old problems: 1. We have to scour every dish until its nearly clean before loading (even though the instructions specifically stated no pre-rinsing necessary). 2. I am not sure the soap cup opens. The soap is always left caked in the cup resulting in running the dishwasher twice. We have tried all kinds of various soaps and they all do the same thing. The eco-friendly soaps are the worst. We strive to be eco-friendly, but how can we be if we are using the harshest soaps possible AND running our dishwasher twice?! Not to mention the pre-rinse scour and running water until it is 120 degrees prior to running.3. The dishwasher also leaks and is very noisy.I have read some other reviews on this product and realize our dishes are not always dry at the end. This is a non-issue for me. I dont care so much if the dishes are dry. I do prefer for them to be clean. Dishes are a task I do not prefer to do. It would be nice to have a functioning helper. I am grateful the thing hasnt caught on fire. I saw that this dishwasher currently sells for $800-$1,500. I cannot believe it. I wouldnt spend $100 on this piece of junk.

Similar to another comment, we bought the entire suite. Dishwasher cycle screen gone after five uses. Oven temp needs adjusting. For the quality we were sold, this is extremely disappointing. Bought extended warranty, thank God, so will see if it was worth it.

Our microwave (GE model JEs1655DR1BB) is only a couple of years old (if that). Today, my teenage son went to make microwave popcorn and the microwave made the most horrendous noise and started sparking behind the panel on the side. It lit up the entire room. I went and checked to make sure there wasnt something foreign in it (there wasnt) and stupid me thought maybe it was the popcorn so I tried a bowl of water. It did the same thing again. I am just thankful it didnt start an actual fire, but I am furious!

Coincidence or not but after posting my review, threatening to get the attorney general involved, putting pressure on local GE distributor through the builder, we have received a replacement dishwasher. This is not a happy ending yet unfortunately.The installer who delivered the unit was filling in for someone who took a day off and was not familiar with complete process. He came to our house at 9am and left at 2:20pm after spending hours reading instructions and maps on how to put things together.The new unit works okay for now but does have a slow drip from the upper left corner. This has been an extremely frustrating battle and we are now more worried about what happens after the warranty runs out if problems continue.One option is to buy extended warranty and give GE more business, second is just to replace it with more reliable brand. I am giving GE two more stars for replacing the problem unit but we are still hurt from the entire process, especially after buying top of the line product. We truly feel that customer service people should have been more sensitive and understanding of the consumer instead of firing back. Their bad attitude really did not help and added more frustration.

GE Dishwashers are very dependable and do a great job. I have not experienced any issues with mine. The pricing is very competitive and easy on the wallet. You may be able to find a cheaper dishwasher but just remember, you get what you pay for.

Dishwasher has been running 3 hours and it still has not finished. It is the loudest dish washer I have ever owned and this is the 5th house I have owned. To top it off I just paid $270.00 for a GE professional to come to our house to troubleshoot our problems and it fix the issues. Guess what, problem not fixed and GE has my hard earned money. Thanks, GE.

Nine cycles but none of them dry the dishes. Very quiet, cleans the dishes very well. Like the third drawer, very handy. The only complaint is that it does not dry the dishes. No combination of cycles will dry the dishes.

I just moved into a senior Community and the GE Dishwasher was already here. I moved from a condo that also came with a dishwasher, a GE, new. It was builder grade and I hated it. But I am really enjoying my GE in my apartment! This one cleans very well and is quiet. I like it a lot.

We purchased a complete kitchen of Profile appliances. Everything is fine except dishwasher! The first one didnt clean food and left scum on everything... The company sent service several times replacing many parts.... finally gave us a new one... It still doesnt clean. It will not remove peanut butter, avocado, and my teacups are perpetually stained dark brown. My old dishwasher, Kenmore, left my dishes sparkling... no matter what was on them, plus I didnt have to run my kitchen sink to get hot water first! I will not use GE in my next house which will be built in about 3-4 years.

I purchased a GE over-the-range microwave, GE Profile **, on 2/22/2005 as part of a kitchen renovation. I also purchased the GE Profile dual-fuel range, **, and the Profile ** refrigerator at the same time.I am now having to replace the over-the-range microwave as the interior enamel is chipping off in chunks rather than the discreet amounts in the beginning. The dual fuel range burst into flames and was replaced 3 years ago (the line was eventually recalled). The tracks that support the drawers in the refrigerator are breaking off slowly but surely, meaning they will not be useable shortly. I would not take a GE appliance as a gift.

One needs to be a contortionist to replace the under light bulbs on this microwave. It is a TERRIBLE design. Why werent the sockets placed so that the prong holes could be visible? One has to do a back-bend over the stove top and then the socket holes are still not visible. DO NOT BUY THIS MICROWAVE. DONT BUY THE STOVE EITHER. IT IS DANGEROUS. THE KNOBS TURN EASILY AND OPEN THE GAS.

I had to place a new order for a trim kit for my new microwave oven since the original one did not fit. I was told it would be 5 days when I placed the order, then it was backordered for 5 days, then 7 more days and now 3 more days. When will I receive the product that I have paid for 3 weeks ago?

Have had my GE dishwasher for 15 years. Had initial problem with inner liner pulling away but got GE to replace unit. Has worked fine ever since. Nothing fancy just gets the dishes clean. Would have liked a bit more adjustability with the shelves.

I have a GE Profile dishwasher that is only 1 1/2 years old and the control panel has stopped working 2 times. The first time, it’s under warranty and it repair took place for a couple of minutes. The second time, it’s not under warranty and they want to charge $89 just for the service call, parts and labor. Crazy. That’s a $1000-plus appliance that has already broken two times. I cant run the dishwasher on any setting except the one that it decides to choose for us. Yes, it changes whenever it feels like it. This was one of their higher end dishwashers and, to be honest, it really doesnt clean any better than a lower end one that I had at a previous home.

We had purchased the first listed model of dishwasher (Model PTD7505SSF8SS) and installed it on Aug 27/16. It worked for a total of 13 days and broke down on Sept 9/16. After a good deal of phone tag - a technician looked at it and said no less than 3 internal components had failed, the unit needed to be replaced. We were without the unit from Sept 9/16 until Dec 23/17 when the new replacement unit (Model PTD845SSJOSS) was installed. It worked for a total of 20 days and broke down on Jan 12/17. More phone tag... Tech looked at it and found a number of issues (motherboard, door switch, etc...), in addition - it had been leaking water under the dishwasher for the time it was in service. (All 20 days! What a record!)When a dishwasher leaks upstairs... It doesnt go well for the drywall ceiling downstairs. (The rep at GE was cold and calculated informing me that is what insurance is for!) Im not sure that is what someone who spent $1,699.00 for a GE product (in good faith of a reputable product) expects to be told by the individual who has the ability to make things right? At any rate, this is what you can expect from the trained professionals at GE. When they finally got around to looking at my file... They decided to simply replace the motherboard in the hopes it will fix the leak also.I would have liked a refund at this point (not likely) so I requested yet another replacement (given the issue of water leaking), they absolutely refused. As of this date Feb 2/17 we are still without a dishwasher. Goes without saying - no more GE products will enter our home and I will share, with everyone I can, the caring and kind words of support I experienced from the top level at GE.

We got the GE cafe series appliances with our house. We just completed 16 months in our new house and the microwave stopped working. We had to call the GE cafe person to troubleshoot the problem. He charged us $80 (without even touching the microwave) and said we will have to spend $450 more to fix it. This is such a horrible customer experience. I had a $40 microwave in my old apartment which lasted for 4 years without a single problem. I am definitely not paying $450 for a useless microwave. But now I am worried about remaining appliances I have from GE. I understand that you would say you cant do anything as the appliances are not in warranty anymore. But if you really care about your customers, you should start looking into this and fix it. I am very very disappointed and I am not letting this go. I expect someone from GE to help us to get this fixed. Thanks for your patience to read this outburst of a disappointed customer.

This dishwasher is less than 4 years old and the rack is rusting away. It seems like it happened overnight. I didnt notice anything and then all of a sudden the first is everywhere! The metal inside of the plastic is even disintegrating. It seems like it was rusting before the plastic coating came off. The only good thing I have to say about this dishwasher is that it is quiet. At 4 years old I dont think I should be having to replace both teams!

I bought the GE dishwasher in the slate color, just after a colleague at work did - within a few weeks of each other. Hers has already been repaired twice and is still not working. Mine was installed last week - and did not work even one time. No water getting to it. Had the connection checked and installer confirmed the dishwasher was defective. Im sending it back and want nothing more to do with GE products. I wish I had seen/looked for these reviews before I bought it.

My dishwasher is a GE Profile. It is as quiet as a Bosch we had in another home we had but it must cost half as much. We have it 8 years now- no problems. Never had a service call or anything wrong with it. It owes us nothing.

I bought GE Microwave JES1139BL03 in 2011 and the white paint inside has been peeling off. I think it is defective because I have had other brands and none of them have done this. This microwave was manufactured February 2011.

My Microwave that is four years old suddenly wont heat anymore. It still runs but there is no heat. They told me its out of warrantee already. The repairman says its the magnetron and it costs $600 to replace! The oven microwave combo unit is $1500 altogether to replace. I bought another Walmart microwave for $47 and it works great! GE will not replace or fix it. They dont stand behind their products and are not helpful on the phone. I will never use a GE product again.

Its an older Hotpoint, and the layout is fairly roomy for a dishwasher of its size. The last apartment I was in had a comparably sized dishwasher that had too many shelving elements that got in the way of being able to just shove some dishes in there. Ive discovered with this dishwasher I need to stick to powdered detergent because the Hotpoint doesnt fully dissolve tablets. It does a fine job overall, though.

Paint is peeling on the top part of the oven. It could fall into food. This seems to be a common problem. Called GE. They said it could not be repaired and to stop using it. Buy a new one. What kind of product do they put out that cannot be repaired? Not very good in my estimation. Customer Service did not offer much assistance to replace it. Be warned. Don’t buy GE products.

Our first microwave lasted 15 years now this one 1.5 year. No help just buy a new one. Or pay 100 for their service call. 100’s of consumers with same exact problem and they just get away with it. Ridiculous.

2 year old GE ADORA dishwasher - I am so disturbed tonight after seeing what happened to the protection rubber that is on the exterior of my dishwasher. I decided to buy a new dishwasher because the bottom tray would not stop when pulled out at the correct stopping point. Today I got my new dishwasher installed and when the installers pulled the old one out I was shocked to see that the protectant that I would assume was placed to protect my house was melted all over my wall behind the dishwasher. WOW. Talk about a MAJOR fire hazard. Thank God my house didnt catch on fire because of this faulty equipment. Check out my pictures and you will see the pile of protectant that was under, on my wall, and behind the dishwasher once it was pulled out. Sincerely concerned.

Wow, Donna from NJ, I could have written your dishwasher report! But since I didnt, I have never been so disappointed in an appliance purchase as my new GE dishwasher! Not only are some of the dishes & silverware coming out more dirty than they went in, it takes a ridiculously long time for a cycle. And if there are more than a couple of tablespoons of water on the door, it will pee out onto the floor when the door is closed! Not to mention that there is junk stuck to the floor just inside dishwasher, under the door, after the cycle has run! Yet the worst part is how dirty dishes are after even a Sani Wash cycle! Sometimes, the detergent lid is still closed. Sometimes its open, but the detergent is still there. Even then, dishes may be cleaner in appearance that time, than when the detergent is gone. A water glass, may have gritty stuff - not just detergent stuck and hiding down inside, or more obvious all over inside the glass. I have spent the past year experimenting with various things: detergents, amounts of detergents, arrangements of dishes, heat of water, pressure of water, rinsing dishes before cycle, etc. Glass and pottery normally fare better than plastics, but again the plastic may have started cleaner than they come out! The dealer has been out three times, finding nothing obvious the DW itself, nor anything I have done wrong. He has been told there is a kit that would fix the performance problem, but he cant purchase it, nor can his distributor. I have been told the length of cycle is because our government regulates the amount of water used. So my question is, then its okay to use more electricity?! Its totally embarrassing to serve someone a drink in a glass that is found not clean near the end of the drink! And I, too, have an old 12-years-dishwasher that still works! It was even a cheaper brand. I never had to think where pieces were arranged in that dishwasher. I just thought, in my newly built house, I should have new appliances!

I purchased a GE Dishwasher about two and a half years ago. Recently, we found there was a small leak in the solenoid motor which caused damage to my floor. I looked up for the model number and it is not on the recall list. Now, I have to call the repairman. This should have never happened in two years. What is GE going to do about this?

My dishwasher is part of the recall due to fire hazards. Last week it began leaking. I found the leak which is a crack in the plastic basin right under the heating element. Is this connected? Dishwasher does a horrible job cleaning so I would never use the rebate to purchase a new one nor can I afford currently.

I purchased a GE dishwasher model no. GLD6700N00CC, serial no. ** about 4 years ago. It just finished the wash, rinse and drying cycle when without warning, the front panel on the dishwasher started smoking and spewing fumes in my kitchen. The front door of the dishwasher and top of my counter were extremely hot. Luckily, I was home when it happened. Otherwise, I might have come home to a fire.

I called GE, b/c the microwave has paint flaking off and piling on top of my food. Just like snow flakes. You tap the inside-ceiling with your index finger lightly and it looks like theres a snow fall inside the microwave. Lots of metal is exposed. GE answer: metal is non-toxic, do not worry if small amounts ingested! Told me to not use it anymore and replace it at my own cost. After insisting that they are responsible for a defective product, they will give me a break of $100 on the price, conditioned on them confiscating the above microwave (so you or someone else does not use it). Bad deal. I am looking for another brand!

I recently purchased a GE Profile 1.9 microwave oven from Home Depot less than a year ago. Last week I went to remove something that I had cooked and went to close the door and it would not stay shut. I ended up getting some masking tape to try and tape it shut in order to keep the light from staying on and burning out until morning when I could get a better look at it, thinking that it had to be something small that could be taken care of without any problem. Hinge adjustment, something getting in the way that I couldnt see, etc, etc. Wrong! I have been over this door with a fine tooth comb and there is nothing that I can see that is preventing it from staying closed, not only that but according to everything that I have read, I am very lucky that I didnt get fried while trying to figure out if the latching mechanism was functioning correctly. I am not even going to go through the long drawn out process of dealing with GE over this due to the simple fact that I have been there done that with my dishwasher that showed up with the front panel dented a few years back from the factory and I ended up blaming the place that I had purchased it through instead of GE and have since found out by reading other complaints that this seems to be something that is not unusual when it comes to GE appliances. I spent over 1100.00 dollars on the dishwasher and they only replaced the panel instead of giving me a new one, and I have never been satisfied with the way that it operates, and it was a very long and drawn out process and I am just not willing to spend the time again on another one of their products. It is unfortunate that we have entered a time where customer satisfaction means nothing, and the days of caring about having repeat business from a satisfied customer are over. The prices continue to rise on the things that we have become to depend on and cant seem to live without, but the quality and workmanship have not only diminished but also present safety threats. I will never purchase another GE anything and I am looking forward to the day when we all have finally had enough of this and do something that makes these companies stand behind the products that they sell and quits ripping the consumer off. Its rampant across the board no matter what you buy, and there should be laws in place in order to keep it from happening. We have laws for everything else, why not have a couple that protect the consumer and their pocket books.

I purchased a GE dishwasher model GSD2100v50BB on June 6, 2016. By March 9, 2017, a switch broke which caused the machine to be stuck in the wash cycle for over an hour before it was discovered. This caused soapy water to flow out of the machine all over the floor. It was fixed under warranty but by June 29, 2017 it broke again. It is no longer under warranty and it will cost $70 to 100 to fix it again. It was purchased at Home Depot and they state it is to be handled by GE. GE states that since a year has elapsed, they are not responsible for the repair.

Cleans ok but not sure if its detergent or dishwasher but never seems to get all dishes completely clean. It may leave a ring in my tea cup so sometimes Ill have to clean it slightly to make sure it comes off. Basic settings on mine, nothing special. Good for plates and some Pyrex cookware but it would be nice if I could put larger pots in it. Very basic white in color but it is over 10 years old.

GE Profile dishwasher washes dishes, pots, and cutlery well. Nice capacity. Also has an antibacterial cycle which is handy when someone is sick. Doesnt have a grinder in the drain (which my KitchenAid had) so I rinse everything before I put it in the GE dishwasher.

My old (Panasonic) microwave lasted over 15 years. This brand is really poor quality and they dont stand behind it. Electrical burning smell. Less than 9 months old. Called customer service, they refused to repair and will send a goodwill rebate cert saying I can buy a new one (any model) and I will be refunded. I ended up paying $100 more because all local stores did not have anything close to my model. They will not cover shipping, tax or any of the extra cost of the new microwave. Stay away from all GE products.

Almost 2 years ago and right from the start this dishwasher did not clean. Numerous times they had people come out and supposedly fixed it. Ive had different suggestions as to what to do. 1. Turn on the hot water tap and make sure its hot. 2. Use various different cleaning solutions on top of the dishwasher soap. 3. Use loose detergent.4. Throw at the bottom of the washer.One of the arms keeps falling down. And the last time I was told I could return it and get a deal on a better machine. I am now left with hand washing every item that goes into it unless I want gritty glasses, dishes and silverware. I bought this at Home Depot. I will never buy any products such as this from them nor will I ever buy another GE product.

I have had my GE microwave for over 6 years and the paint is flaking off the inside of the microwave, causing a health and fire hazard. Paint chips in the food and bare metal exposed can cause arching which in turn can be a potential fire hazard. After researching online I have found that this is not a uncommon problem with GE microwaves. Some have had this issue after 1 year. I contacted GE and told them of the problem and that I felt this was a manufactures defect.GE does not feel that this is a defect problem but advised me not to use the microwave any longer. Their solution was to discard this microwave and purchase a new one. I paid almost $300.00 for the original one plus $20.00 for a mounting kit. I was told that GE would offer me a discount on a new one from $339.93 to $319.93 total. This is not much of a offer considering this should be a obvious manufacturers defect. By ordering another I will have the same problem again. GE needs to stand by their products and admit fault.

GE and this GLD5604V00WW dishwasher deserve MINUS 10 STARS. This is the single worst investment in an appliance that I have EVER made! What a waste of money and energy to have this thing. It worked properly through the 90-day warranty period and hasnt cleaned anything since. RUN, dont walk away from this purchase!

A small black piece of plastic, which snapped into the back of the microwave handle has bent/shrunk, and popped off. My microwave is just a little over one year old. I called the GE 1-800 phone number for parts, and GE does not offer a replacement part for this, without buying a whole new replacement handle, which costs over $160.00.

We purchased a GE Adora Dishwasher less than 6 years ago from Home Depot. An unknown continual leak has caused substantial black mold, warped sub flooring and cracking of very expensive Saltillo tile of which weve had to remove. GE should be accountable and will be. Nearly, a $800 Dishwasher will cost us thousands in repairs and mold abatement. Unbelievable.

The little trap door which releases soap stopped opening when the GE top-of-the-line Profile dishwasher was one week past its warranty. Because of the design, all kinds of crud collects under the hinged door, meaning there is ALWAYS an odor unless we get down, hands and knees, to scrub it out. Features are fine -- as long as they work. Having a dishwasher that doesnt even dispense soap and cleanser isnt worth much, limiting us to the automatic feed with shine liquid. Stainless steel outside is impossible to keep clean. There are streaks and blotches within minutes of polishing with Sheela Shine. Suspect it has something to do with the humidity where we live, but it shouldnt happen. I find it strange that GE is perpetually sending me warranty extension offers for my refrigerator (which never fails), but nary an offer for the dishwasher or microwave/convection oven in the Profile line which have each needed repairs twice in the three years since purchase.

We purchased a new home in 2014 with all new GE appliances. The dishwasher has never cleaned the dishes. I have to wash the dishes before I load them in the dishwasher. I might as well use the dishwasher as a drying rack. We had a service person come out before the warranty expired. We have used all of the proper cleaning recommendations and setting per the service person. Not even 2 years later, the dishwasher started leaking and ruining our hardwoods. The dishwasher was quiet but then started making a horrible noise and a burning smell emanated when door was opened. Unfortunately all of our kitchen appliances are GE. If we replace any of the appliances, they will not be GE. I will also be getting in touch with the builder of our home to let them know that GE appliances are not reliable. GE needs to recall this dishwasher.

First, as a new homeowner blessed with select builder-provided appliances, I never imagined I would be authoring this letter 4 months after closing on the new home. Your friggin’ microwave oven light mechanism truly sucks! I lost the two bulbs a week or so ago and purchased two more at the cost of approximately $10, even though a one-year warranty was stated. That was okay, as I was more interested in fixing the problem versus starting some long-range purchase interest. So, and this is the most aggravating aspect, I have the correct pins and life is ** good, and as I attempt to insert the first, the ** pin breaks off. Okay, so I reflect on the horrific engineering of the mechanism, and I softly” align the second of the two bulbs, and the ** pin breaks off again. ** is my predominant theme tonight. As well, believe me, I am going to inform Taylor-Morrison that their respective selection of your friggin’ lousy pieces of crap is corrupt and misguided. You suck, G.E.! I’m moving forward.

Very convenient. Easy to use. Take some time to clean though, have to cover all food for splatter of food on the topside inside of microwave, have scour off with strong pad. Also it is not radiation free for health. But the microwave is easy to lift. The best thing about it you can cook frozen foods. Like meatloaf, beef stew my favorite, pizza, chicken.

GE had a recall but only gives you 50.00$ to replace it or fix it. We could not afford a new dishwasher. I talked to GE and they were no help at all. So we still use this machine but we do not run it unless we are home. This was the machine that would catch fire.

I also bought a counter top GE microwave oven model jes1451dn1bb that turned itself on and then stated a vegetable sensor error. I did not trust it after this and when I plugged it back in, it stated a keyboard short had occurred and that I may need service. What I need is a non-GE microwave oven that works longer than 18 months. Prior to this machine, I had bought the same model back in 2003 and the same thing happened; The machine turned itself on and stated a popcorn sensor failed. This was back years ago and I complained to GE but never heard from them. This problem has been going on for years and they do not give a ** about the consumer who lives with this machine. I complained tonight about my second microwave and unless a miracle happens, I will never buy another GE product again in my life!

I use my microwave for the usual: reheating, cooking small meals. Ive had it for several years with no problems. I would recommend it to anyone. I like it.

Have had this microwave for about three years, no problems so far. White so it matches our other kitchen appliances. Good size for most uses and easy to clean.

Microwave (GE 2.2 PROFILE) was manufactured in Oct 2015, I ordered in November 2015 and it was delivered January 2016. Installed in March 2016. Was making rattling sound like the case was loose or something. The other night I placed cup of water in microwave, turned on for 1minute and FLAMES shot out (on the inside) from the “squares” on the inside. Does it every time so unplugged. Contacted GE. Was told Out of warranty. Repair person can’t come for 2 weeks. Waiting for return call from customer support. I don’t think flames can be fixed!!

DO NOT BUY GE APPLIANCES. The quality is terrible even on an expensive dishwasher. I bought a $700 dishwasher in November 2016 and in April 2017 it was broken, parts not available, but after fighting with customer service, they sent me the parts at my house. No one is available to come over to install the parts, the parts are sitting at my table. I guess they want me to install them myself. I even had purchased a 5-year warranty. Customer service is non existence at General Electric. I know I will never purchase a GE product ever again.