We usually turn on the dishwasher in the night. Last month ours started smelling smoke in the morning 6:00 am. When checked, it was the dishwasher that melted couple of plastic cans and its own sprayer and other plastic parts (pictures speaks for itself). When checked with GE, this model was not under recall (there are other models with similar issues). They sent their technician, who confirmed that newer models has auto turnoff circuit. When I asked GE rep, both (level 1 and her manager) assured me that even though it shows its burnt from inside, it would have contained the fire inside, which I disagree. Even after seeing pics, their tech review and the whole incident, their engineers determined this is not a safety hazard to me or my family.

The flat, firm-press keypad for microwaves just seems dated. Often they get worn out. However, all in all, it does what a microwave is supposed to do and does so efficiently. It’s not the most attractive microwave though.

There was a recall on my fairly new dishwasher. The heater was causing fires. The repairman came and said I had to remove my ceramic tiles in front of the dishwasher for him to pull it out. I called customer service and a Tina offered to reimburse me $200 to have someone remove the tiles and pull the dishwasher out. I paid a handyman $250 in cash to have it done, called GE and they sent a man to fix it. I called again for my $200 and explained their man fixed it. They now wanted a bill from my floor man. I sent the bill and they refused to pay because the bill did not say paid. I called and asked them how their repair person could have fixed it if the floor had not have the tile removed and the dishwasher pulled out for him. I said, Ask your repair person to verify that the tile was removed. The answer was they couldnt ask him. I sent the bill again with a note saying paid in cash, a picture of the floor and a picture of me - a 74-year-old woman with a note saying it was impossible for me to have ripped up the ceramic tile and backer board myself. Again, I got a reply that the receipt that I sent was not acceptable and the case was closed.

I called the toll free number because of the concern I am having with your microwave, the paint is coming off the inside. So my concern is first why would it be coming off, is it a defect in the product or does it just happen? The person was helpful and seemed as if it was to be concerning. WELL IT IS to me. Could it make us sick, do I need to put it in the trash or what? Thanks for not helping me and not being concerned, but I am sure if it was you or family you would have had a different story to tell.

I bought GE Profile appliances 5 years ago. The dishwasher motor needs a new one. It cost me $300.00 to fix and I ended up buying a new dishwasher, of course, no more GE. Six months ago, my GE profile fridge is not making ice. It cost me $300.00 to fix. Now, the freezer is not working right. I was told another $300+ to fix. I went out and bought a new fridge. Back to basic, Kenmore brand. GE profile is not inexpensive and only last 5 years, starting to break down. Please stay away from this company.

Beware of GEs scam! My new house came with a GE microwave oven model JVM1630. It no longer heats food so I called GE repair. Heres basically what they told me: It is likely the magnetron tube and it is still under warranty, so no charge to replace it but I would have to pay $99.95 for the repairman to come to my home to diagnose the problem. If I decided I didnt want to repair the microwave, I was offered a $100 coupon toward a new one but it had to be a GE and it had to be bought on their website only. If I decided to go ahead with the repairs, the $99.95 would be deducted from the bill and I would only have to pay for additional parts and labor. I repeatedly asked for a ball-park labor charge so I could make an informed decision as to whether it was cost effective to have the repairman come out or just get a brand new one elsewhere. The person on the repair line hung up on me! I called back and I was told the same thing; that no one could tell me what the labor cost estimate might be. I asked to talk to a supervisor and same story. I didnt schedule a repair because I was taking a long trip and wouldnt be using the microwave anyway. When I returned from my trip, I called GE repair and again they wouldnt give me a ball park figure. Frustrated, I decided to have the repairman just come out and repair the darn thing and an appointment was scheduled for the next Monday. I had to rearrange a Monday day trip to Wednesday and set the repair appointment. On Monday, it was starting to get late in the afternoon, so I called to find out if the guy was on his way. A recording said my call was noted and I would be receiving a follow-up call. About 10 minutes later, Kim in dispatch called to tell me she had to reschedule the repairman to Wednesday. I explained I already had an appointment on Wednesday. which was already changed because it conflicted with the repairman coming to my home. She told me the repairman couldnt come because his truck wasnt safe to drive so that whole day was shot. The appointment was rescheduled for Wednesday and I had to again reschedule my other trip. When the guy finally showed up on Wednesday, he told me to put a glass of water in the microwave and start it. Ten seconds later, he declared it to be the magnetron tube. He was at my house about 10 minutes, just long enough to take my $99.95 credit card payment and to give me an estimate of $246.90 to repair the microwave which included the free magnetron tube, a $20 part plus tax and labor. The estimate had instructions on how to get the $100 coupon if I decided to buy a new GE microwave, which he said is what most people do. He didnt seem like he came prepared to repair the microwave at all. I was so frustrated and already out the $99.95, so I told him to go ahead and repair it. He said I should call repair to schedule him to come back to repair it! I told him to just repair it now and he said he didnt think he had a magnetron tube in his truck. I asked him if he would go to the truck and check! He did, and nope, no tube and he left.I think this is a great scam GE and maybe others have going. Its entrapment. They get you to accept a repairman to come to your home and charge you nearly $100 for it, but give you a coupon for $100 for a new one but it has to be a GE and can only be bought from their website where they can go as high as $500 or $600. By the way, I got on the website to find a replacement. My model had been discontinued and the only one in my price range was also a discontinued model. They charge $75 to come out to install it and another $30 to take away your old one. I called local appliance stores to see if I could unload my old microwave for parts and they all said the same thing: stay away from GE products.

I purchased the GE Caf Advantium Oven Model No. CSA1201RSS. This is supposed to be one of their top of the line Microwave/Speedcookers and at $699.00 it should be. Within the first few months with little use, it made a loud buzzing sound and it went dead as if the breaker tripped. It was under warranty and a GE tech came out and repaired it free.The problem was the Magnetron, a key component inside the unit. I was shocked to see that the Magnetron was made by LG. I bought a GE because I did not want an LG, but I ended up with a GE with LG parts. The unit worked for several months and now it will not heat anything. I have only had this unit for 13 or 14 months and it is broken for the second time. I called the 1-800-GE-CARES to learn that they do anything but care. They told me it was out of warranty, but the parts are covered.It will cost me $99.99 for the tech to come out plus the cost of labor to repair the unit, which varies based on what needs to be repaired. This is unacceptable. There is clearly something wrong with this unit. I have had microwaves last 10+ years with no issues, and one of them was a GE! I thought GE would stand behind their products better, especially since they can see I had prior problems with this unit. This is a $699.00 tin can.

I give it stars for value because an extra step is needed to set cooking time. Most microwaves do not require pressing a cook time key before selecting # of seconds. Other than that, microwave is first-rate and very dependable. We use it several times a day for 1.5 years now with no problems.

On 05/20/2014, our GE microwave over the stove unit burst into flames. My wife was using timer and walked away then turned around and heard the microwave fan start (spontaneously). Then she observed flames/smoke reflected in the Microwave window. She observed the interior of the microwave was aflame. The fire was extinguished with a rag & water. The burning items appeared to be plastic/insulation. The fan from the microwave was with the burning insulation on the rotating plate. Had this unit only 14 months during that time the microwave fan would turn itself on for 3 minutes and then turn off all by itself. Happened twice in 14 months. Glad we were at home and were able to extinguish the fire. Called Lennar the builder who put this unit in to take pictures and check electrical. Was told the GE unit was bad to call GE. I know this will be a hassle as others have had this same problem with not so good results.

We purchased a GE over-the-range microwave oven last November 2010 and it was installed in February 2011 when our addition was finished. Last week, it decided to stop responding to instructions. When the door is closed, it just continues to run--the turntable turns, the light stays on and the fan keeps running. It will respond to instructions, but when we want to shut it off if the door is shut, we have to unplug it--which is a real pain because it is over the range.We have an old microwave that was my wifes parents and it still works fine even though it is about 20 years old. The new one stops working in a little more than a year which is not acceptable. We contacted GE and were told that we would have to pay over $100.00 to get the thing fixed. I dont think so. We will not purchase anything GE again.

Today my GE black microwave with rack mounted above the stove, caught on fire by itself. My husband and I smelled a chemical like smoke. We went in the kitchen and we saw fire in the microwave. We put out the fire and was thankful that we were home. If we were not home our house would have burned to the ground. The microwave was not in use at the time of the fire. I plan to contact GE about this dangerous event. My asthma has gone crazy since this horrible situation happened. I just want to let people know that GE microwave will catch on fire without being in use.

The dishwasher is new and looks great. However the dishes are not getting clean. After washing with a 200+ minute wash cycle utensils are still dirty and food particles are left on plates and bowls. This is occurring even with a good rinse prior to placing them into the dishwasher. I clean out the food particles filter after every two loads, makes no difference. Also the water bottle jets are a nice idea but water bottles are too tall to fit even with the third rack removed. I am very displeased with my purchase. This was not an inexpensive model.

Very convenient. Easy to use. Take some time to clean though, have to cover all food for splatter of food on the topside inside of microwave, have scour off with strong pad. Also it is not radiation free for health. But the microwave is easy to lift. The best thing about it you can cook frozen foods. Like meatloaf, beef stew my favorite, pizza, chicken.

I had my original microwave for 20+ years. I replaced it in 2009 with a GE Model HVM1540DN188. Started beeping in middle of night a week ago, with message keyboard shorted service needed. I unplugged several times and it would start coming on by itself. I cannot believe they dont warranty their shoddy keyboards. I am very angry. I think they should stand by and replace their keyboards free of charge since they are fully aware they are making deficient product. This is scary to have an appliance just start beeping and say shorted... luckily I had my original wired in microwave replaced and put in a plug in or I would have flipped out if I could not unplug it. I got this along with the GE stove... so far the stove is not beeping...

We bought our first new dish washer 2.5 months ago. It has never worked since we got it. Figured out it was the door. We have called SIX times to GE to have someone come fix it They told us that their systems were changed and that they would take care of this! No phone call back or anything. I finally had to called the service people my self. Whats the point on a warranty if your not going to help. I will never buy another product from GE again!! I am VERY disappointed in the service. If you say your going to take care of it and call me back, then take care of it.

Just purchased a home with GE Appliances. Dishwasher suddenly wont start and showing 1H code. Nothing in the user manual that explains what this means. Called customer support. After they requested unnecessary personal information (like email address, physical address, etc.), I was finally able to ask what this code meant. She went straight to, We are unable to provide that information over the phone. We have to send one of our service technicians out to your home. She refused to tell me what the code meant, and instantly wanted to charge me for tech visit. I hung up. Then I googled it, and found out right away that it meant the start was paused/delayed for 1 hour. I had hit the delay button by mistake. This was not specified in the manual under Delay Start, nor was customer support trained or willing to provide the answer to such a simple question. GE Support is just a Scam.

We had to replace our dishwasher a few months ago and we got a GE Dishwasher and we could not be happier. This unit cleans so much better and seems to take a lot less time to do a full load. I would recommend GE to my family and friends.

My dishwasher broke within warranty in April 2014. The warranty expired on April 29th, 2014. Every 2 weeks another part was ordered to the tune of 10 parts and 8 visits (unpaid work days for me). I have been in touch with consumer relations about this and I was told that this would go on forever until their techs deemed the dishwasher as unrepairable but as long as it is repairable, they will not exchange the machine. And now they are telling me (October) that I could have had another service provider fix it but I would have to pay for it because NOW it is out of warranty. I cant wait until I replace my GE refrigerator and my GE microwave because those are the last GE products that I will ever buy. I went out last month and bought another brand as I will never buy GE again. GE protocol I am told is what determines all that happened. I suggest you do the same. I am writing a long letter to GE just to get it off my chest. Nothing will be done because its another corporation all about the money!!!!

We bought a new $700+ Stainless Steel dishwasher 10 months ago. It has failed on several occasions, and we have been without a fix or replacement for months. We are forced to have 5 service calls, none of which have fixed it. We have been hand washing for a family of 6 for months now, and GE Consumer Relations is totally unwilling to replace it, but rather continue sending out the same service tech with no new parts or ability to correct the problem. It is the definition of insanity while we are left holding the bag. Totally unwilling to do the right thing and it is maddening to say the least. 3 months of back and forth about our need to have it replaced, and their answer is send another service person who are now 0-5. This is the worst customer experience I have ever had in any situation for anything.

Just bought a Monogram dishwasher one week ago, and the front sound barrier fell off. The service man came out, took a look, and said it was not a big deal. I questioned him why it fell off within such a short period. He stated that it was GEs policy: to make Monogram quieter than competitors, they put in sound barrier in front. However, it fell off often. Since it does not affect how the dishwasher work, GE does not believe that it is a big deal. Therefore, no need for quality control, and he will use new glue to glue it back. No guarantee that it will not fall off later... What is GE stand on the engineering products any more? Will never buy any more GE product...

We purchased a VERY expensive GE dishwasher (Re: Case: 13259178, Model: PDWT580V00SS, Serial No:MZ841691B) for over $1500 and IT DOES NOT WORK! It actually DESTROYS dishes! It leaves a thick detergent film on plastic cups and plates and renders them unusable. We have scheduled no less than FIVE technician visits and all of them refuse to indicate that the dishwasher is faulty and needs to be replaced or they would likely lose their job. All they say in their report is that the dishwasher is performing normally. So a dishwasher that DESTROYS dishes is NORMAL? GE is a $265 billion company. They have a customer that is infuriated with a faulty product that they will not replace. They are giving us the runaround and it is unconscionable. Any other consumer focused business would have replaced their product by now. Not GE. They have a huge infrastructure built to keep consumers from getting their products repaired or replaced correctly. This feels like Davey Vs. Goliath but we are going to prevail. My advice to all consumer is to NOT EVER buy a GE dishwasher, unless they like to have their dishes ruined.

GLDT696 series dishwasher - I have put up with my GE appliances and their problems for years, but now I will throw in the towel. Our Contractor appliances were replaced 5 years ago when remodeling the kitchen. Ten years of no problems with cheap stuff replaced with Stainless Steel GE ovens, fridge, microwave and dishwasher. I will only mention the dishwasher in this posting. Bottom line... Wish I went with another manufacturer. The washer has a gasket that loves to fall out of place creating leaks or floods. The pump has failed after the one year warranty. The control board has been replaced twice and today it looks like there will be a third one. That is if I am stupid enough to hold on to this piece of junk. If I buy another manufacturers steel front dishwasher it will not match the other appliances. At this point I dont care. Unlikely to ever buy a GE appliance again.

I purchased a GE over-the-range microwave in 2008. After 3 years, the magnetron went out and the microwave stopped heating. I called GE repair, and they told me it would cost over $300 to fix - close to the cost of a new microwave. Stupidly, I bought another GE microwave in August 2011, model JVM1750DP1BB. In the one year Ive had it, it has broken 4 times. One time, it was the magnetron (seems like a common problem). Another time it was the motherboard. Another time, it was a bad wiring problem. Each time, I called the GE repair service, and it takes 1-2 weeks to get an appointment. Twice, they cancelled my appointment on the day because they overbooked. Given that I had to take time off work for the appointments, this is a huge inconvenience. I have been waiting over this last time for an appointment, after they again cancelled my scheduled appointment. GE makes a terrible product, and their repair service is a joke. I bought GE because I wanted to Buy American, but they have completely turned me off. Think twice about buying GE! You will waste lots of time and money.

We purchased a GE microwave/convection oven which developed peeling on the inside top of the microwave. GE contacted me and offered a replacement ($300 toward a shelf model or prorate the microwave/oven). Why would we take $300 replacement when we paid nearly $3000 for this oven???? So we took the prorated one directly from GE. We felt confident that we would not have a repeat of the problem. The oven was manufactured in December 2012. After it was delivered, I noticed a rough area on the turntable; and after the oven began to peel AGAIN on the second oven, I believe that the rough area was due to a remanufactured part on the oven.Now we are stuck with another microwave/convection oven combo with the same issues as the first oven. I never used anything harsh to clean the oven and now this happens again. Why cannot this company manufacture an oven that will not have defects in it??? I am tired of peeling paint on a second oven when I have done nothing except pay them for 2 ovens. Why cannot they use stainless steel interiors, and this would stop the many complaints that people make about the product. I would NEVER again purchase another product from this company. The products I have purchased have been inferior. I paid for two microwave/convection ovens and still have one that is inferior!!!!

The side panel of our built-in GE Profile microwave 1999 caught on fire when my daughter was using it. It had a faint glow behind the metal plate. Then, it became flames quite quickly. A flash and pop was the ultimate end before we turned it off during the test. It had been working fine until the fire. This is a definite safety issue. Now that I know the microwaves have been faulty, it makes me concerned about the GE Profile electric stovetop burner. I have noticed it gets extremely hot and doesnt seem to want to turn off!

4th service call for a piece of ** over the range microwave that keeps breaking. The service is a joke too. The sent some moron to come take a look at the microwave after I placed this latest service call. He came and without diagnosing, he ordered a few parts and scheduled a follow-up for today. He called this morning to reconfirm the appointment (which was already confirmed 2 times previously and this reconfirmation has never taken place previously) and I missed his call. When I called him back short whIle later, his voicemail directed me to call the 800 #. After a 35 min hold with them, they said since I didnt pick up the phone in the morning, the appointment was canceled. What???? It states nowhere that theyll call you to reconfirm an ALREADY SCHEDULED AND CONFIRMED appointment and that if you miss the call, they cancel the appointment. Next service call is a week from now, which makes it 3 weeks without a microwave. I hope they rot in hell.

I have a 3 and a half year old GE Cafe Dishwasher which I paid over $1400 for and yesterday, when I ran it, I had a couple of cups melted when I opened it. This morning, I opened it to remove the remaining dishes. I closed the door to it and left for work. I did not run it again, just emptied it. My husband came home about an hour after I left to a house filled with smoke and the smell of melted plastic. He opened the dishwasher and found everything inside melted. The spinners, the silverware holder and all the plastic rack dividers were totally melted.Apparently, the heating element stuck on and overheated it. If he hadnt come home when he did, I believe our home would have caught fire. He said the whole kitchen was much hotter than the rest of the house. The service repair man said it cant be fixed because it got so hot it melted the seals in the motor. It was not a wiring problem with the house. It was a problem with the dishwasher itself. So now, I am out $1400 plus a house full of very toxic smelling smoke.

First Profile microwave/oven caught on fire. Was replaced. Front panel on Profile refrigerator not reacting to touch. Repairman said that this model had problems. Fixed it - cost over $100.00. Dishwasher (Profile series) not worth the cost of heating the water to run it. Cleaned dishes by hand. Stove top died - not reacting to touch. $90.00 for repairman to visit us, and another $60.00 to tell us what was wrong. A lot of money for inferior products.

This dishwasher was provided in our new manufactured home. It is the cheapest and loudest dishwasher I have ever had. But to be fair, I didnt pick it out. My friend just bought a new Bosch dishwasher and returned it because it didnt come with a heating element! Make sure (with the new energy saver models) that it comes with a heating element! Spots all over her glasses!

We moved into our new manufactured home in May of 2013. That is the month our above range built-in GE microwave was installed. In October of 2013, one of my sons heated a frozen chicken cordon bleu serving for 3 minutes, 45 seconds, according to packaging directions. He said that some of the inside of his food was cool, so my other son put in his serving for four minutes, zero seconds. All of the packaging was removed and each serving was placed on a separate Corelle plate and covered with Glad microwave-safe plastic wrap. While heating the second serving, the microwave started on fire. Fortunately, my son extinguished the fire before it spread. The food did not combust. The fire seems to have started from the ceiling behind the fan. The entire inside of our microwave is clean except for the soot that billowed out from the center of the ceiling. When the service tech came, he scrubbed the soot off of the ceiling with some paper napkins (which he left inside of the unit) and said that the microwave was a total loss. He also said the fire was caused by misuse, because plastic wrap is not meant to be used in the microwave, therefore even though the fire happened within a year of purchase and installation, our warranty was void. I asked GE to get a second opinion and they agreed to send a third party servicer (A&E) who stood me up three times! I finally got to schedule a GE tech to come at the end of December and they sent the same guy who said the fire was our fault! He told me that he never said plastic wrap is not meant for the microwave, but that we are being dishonest because fires only start when the food is left in the microwave for too long. He accidentally let it slip that he is seeing the same problem with GE microwaves in a lot of new construction for student housing in Tallahassee. (We live 20 minutes south of there.) He attempted to recover GEs reputation afterward by saying that of course it was the students faults, too, for misusing the microwave units. Anyway, GE has graciously offered to sell us a new microwave at slight discount. Haha, no thank you!

A week ago I placed a microwave dish in the microwave oven. The second rack was in place with the small microwave dish on it. When it started I noted flames from the rack bracket. The plastic on the rack had melted. I removed the rack and have not replaced it. This morning I place a microwavable cup in to reheat the coffee, and once again flame erupted.I am calling GE but wanted to let people know of this problem. I have had this appliance for a month. GE sent out a repairman. I overheard him tell someone that when there was cavity they considered it not repairable. Whomever he spoke with asked for pictures and from that deemed it repairable. I would not let them repair it as a fire with flames hot enough to melt the bracket and burning an opening in the inside shell is not something I want in my home. I received no satisfaction from GE as they just follow the Party line, I doubt any of them would want to take my repaired oven in their homes. I will dispose of it and purchase a new one from a different company.

My GE over the range Microwave has broken about 4 times in a years time. My warranty company American Home Shield (AHS) has decided that instead of replacing this piece of garbage, its somehow worth it to keep on fixing it, which is apparently their MO for all their customers but I digress. After the latest breakdown (microwave lost power completely), I was referred by AHS to GE Appliance repair. Thus began the nightmare. The tech that showed up was incompetent at best. He showed up, looked at me, made a grouchy face and proceeded to walk in the kitchen with an attitude like he was doing us this massive favor. He opened the microwave door, closed it, opened his computer and ordered 10 (yes 10) different part. Again, he literally just opened and closed the door - did not disassemble to see what part was actually messed up. No diagnosis done of any kind. He scheduled to come out the week after that - didnt show up because I missed his phone call. Btw, I called him back pretty immediately and he didnt pick up. After being on hold for about 35 mins (which is clearly the GE standard hold time), they tell me the guy has left the area and they need to reschedule me for a week later. The day before the 2nd appointment, they called to reconfirm and then the morning of, I called, stayed on the standard 35-40 min hold and reconfirmed he was still coming and was told he was on his way. Well, the appointment time came and went and he failed to show up YET again so I called to ask wtf happened. They said he didnt come because I canceled the appointment thru an automated call. This time the idiot didnt call me like they always do. I asked for proof of this alleged automated call that was placed to me and they said no call record exist and so while it seemed like a system glitch, the tech already left the area and theyd need to reschedule it. I told them, No, thank you. Got a local repair company to come out the very next day. Turns out, out of the 10 parts that idiot tech had ordered, only 4 had arrived while the invoice still showed 10 being shipped. Let me clarify this: All these issues stem from GEs entire company: From manufacturing crappy products to HR hiring incompetent techs to customer service being absolutely nightmarish to supply chain not sending parts that are being ordered. And if you can somehow get their alleged consumer advocate department on the phone after a 40 min hold time, they dont give a crap either. All these employees MUST hate GE to drive customers away as far as possible. I own a business and I will never ever EVER buy GE again.

Clean neat appearance over stove. Fast consistent heating. Easy heating options. Turntable on or off. Also, love the stove top light. Cost a bit more than I thought it would, but not much more than others.

I have had 2 of GE microwaves, above the range models. Both the same model, but different years. One stainless finish and one almond. They are almost exactly the same. They are efficient, and I like the carousel for even cooking. But I would like it if the light bulbs under unit were easier to replace.

Purchased a new stainless steel 1200 watt General Electric Microwave in 2012. By 2013, the opening latch broke. They were willing to send the part as long as (I did the labor). I did the repair and put the machine back in service. At the end of 2014, an electrical storm occurred inside the unit with smoke and flames beginning within the control side of the unit. I unplugged it, let it cool, then later confirmed it was ruined. I tried consumer service again. They sent a repairman out to confirm the unit was not repairable. This time they called 2 days later and offered me a $20 coupon toward a new, retail GE microwave.Basically, they wasted my time. They should have just told me I was screwed and their units now only last 2 to 3 years, even if you buy a top end counter model. I waited at home 2 hours for this repairman to come by and several phone calls and would have more appreciated a quick answer, gotcha sucker! You bought a piece of crap GE product and youre screwed!

Reasonably priced. I dont cook in the microwave, however, I use it everyday. It has an up to date look and will match any kitchen. The GE brand has been around for years and remained a reliable appliance my family has relied on.

I just remodeled my kitchen back in May of 2012. My wife and I started looking for the appliances and we decided to get the GE Cafe series set (dishwasher, cooktop, electric oven and microwave). Our microwave oven, model CVM1790SS1SS, developed a humming noise as soon as you closed the door. It does sound like the magnetron is on. To verify that, I filled a cup with cold water and I put it inside and closed the door without setting any cooking time. After three minutes, the water was too hot to touch. I called GE and told them that it was a fire hazard.They sent one of their technicians and he determined that it was not a fire hazard and if I wanted it fixed, I have to pay for it. How could he say its not? If I close the door, the oven is going to continue heating up until it burns itself and everything else around it. I am pissed at GE because this unit is barely one year old and expensive. This is a safety hazard and GE failed to acknowledge. Bottom line, Ill never buy GE again and will not recommend it to anyone.

The performance of my microwave is great - not fancy but does the job. Its size is fine as it fits just right where we wanted to put it. No complaints. I havent had any problems, therefore I consider it a great value. Plus, I would get the same size if and when I replace it!

My GE Adora microwave is about 6 years old and for the last year it has had an issue with moisture in-between the glass front door. It was streaky and now I have cloudy blotches. Called GE repair and it would cost close to $90 just for service call not including parts/labor. Think twice before purchasing this microwave. Not a happy consumer.

For the amt. of money I paid for this microwave, you would think it would outlast the house. I bought it 3 yrs ago. The touchpad covering started to get warped right off the bat, and the handle was always steaming hot when you used the stove top (also GE). The other day, while using the stove top, I happened to look at the microwave, and it had no power. I checked the breaker, it was fine. I happened to notice a crack on the touch pad. After further investigation, I noticed the entire touchpad is shattered. It was clearly from the heat given off from the stove top. And I wasnt even using the microwave at the time. I sent GE an email, didnt even get an auto response. I am going to call them, but we all know what they are going to say, and I am not paying $482 for the part. Was hoping there was a recall, since so many people on the net complain about the touchpad.

My life partner/bf moved into a semi flipped 10 yr old home. Every single appliance required to be replaced, everything from refrigerator, stove/oven, to dishwasher. We researched every appliance we purchased, a lot of time and effort along with reviews from various reputable reviewers, pointed us to the GE GDT DISHWASHER. Who can go wrong with three tier washing amongst jetted water bottle washers?After a 1 1/2 yrs in the top spinner completely separated from its housing. We googled the problem, GE said it was a faulty design, yet no recall. The door lock began to fail, googled the repair fix, another fault design, yet again no recall. Upper plastic door trim broke in half, solution, replace the entire console. Guess what? My solution here on out is to not buy GE products. If two years is all you get with a GE product, I am out! Done with your products that once lasted 10 to 15 years. The fact that have to research another DISHWASHER, absolutely pisses me off. I dare you GE to win me back!

Called in for my washing machine and got service on my dishwasher??? With a bill of $207. A scam. Please take my advice and never call GE.

We upgraded our appliance package when we bought our village builder home 8 years ago. All GE Monogram appliances have rusted and now need replaced. New liners needed in oven which was so rusted we couldnt get the screws out to replace the originals. Was told by GE customer service rust to be expected when cooking. It creates steam and food particles can cause scratching!!! Maybe it should be steam proof especially a microwave. Even the door on this is rusted! Why the shelf ends in a freezer are rusted not sure on that one! Will NEVER buy this brand again and shame on them my upgraded appliances dont even make it to 10 yrs. A disgrace. My mother just replaced her 20 yr old oven. What is wrong that nowadays things dont last 5 minutes? Shame on you GE not recognizing a definite flaw in your products.

My GE microwave, has been running fine, but the door handle has cracked on the bottom. This is the second GE microwave that I have purchased in three years. They need to do a better job with the door handle. I will never buy another one.

GE Quiet Power 3. I overall like the dishwasher. It does a good job of washing the dishes, but not a great job. They need prewashed if very dirty. The soap dispenser often cakes if using powder. It is quiet. Cannot tell how much time is left on cycle.

GE over the range microwave Model hvm1750DM1 WW - It’s just about 2 years old. It started making a grinding noise, then quit. No more GE for me.

The dishwasher malfunctioned and flooded our home. The dishwasher continued to run even with the door open and the display showing “leak detected”. We had started it before we left the house and it had been running for about 20 minutes when we left. When we came home hours later, hot water was still being produced by the dishwasher and had flooded our kitchen and basement. We could not stop the dishwasher with buttons at that point and had turn off electrical and water supply to it. The absolute worst part is they will not replace or refund it even though it’s less than six months old. They are only offering to service it and expect me to continue using it.

I owned a previous GE dishwasher 4 years ago and would give it excellent ratings. I bought a newer top of the line version when I purchased a new home. It simply fails to clean dishes. Wet food that any dishwasher would remove, remained on the dishes. The drying cycle never dried the dishes. We have to hand wash the dishes now and have stopped using the dishwasher after 3 days of ownership because of health hazard. I called Lowes about this within days of the install. Lowes sent out the installer who claimed the machine was installed properly. Then Lowes scheduled a GE repairman to come to the home. We waited all day for him to arrive for a morning appointment. He never came. Lowes stepped up and is replacing the dishwasher with a non-GE product. I would not touch a GE product again given the lack of service and commitment to their product. I feel confident with Lowes, but not with GE - their ethics from engineering, manufacturing and servicing are very suspect with us.

This is the second time that my GE microwave oven is peeling the paint on the inside of the oven. We paid over $240.00 the first time and think that this is a serious flaw this particular oven has. I think that the company should be liable, not the consumer.

After heating some water in the microwave, I opened the door and removed the water. A few minutes later, I heard a noise and noticed the microwave was running and the control panel indicated it was off. I opened the door it turned off. Closed it and it was on. Smelled something burning electrical in nature. I had to kill the circuit breaker to turn it off. I opened the door and felt the inside of the microwave and it was extremely hot. I was concerned that it could result in a potential fire, I continually checked it until I felt it was cool.

Similar to another comment, we bought the entire suite. Dishwasher cycle screen gone after five uses. Oven temp needs adjusting. For the quality we were sold, this is extremely disappointing. Bought extended warranty, thank God, so will see if it was worth it.

GE profile microwave magnetron burned out after 2 years. Part is supposed to be under warranty, but repair is not. There are no service centers in my area. GE wont just send me the part, or let me send them my old part.

While heating a bowl of butter, my microwave arced. Microwave had smoke and electric fire smell. I have contacted GE. They said it was a rare issue. From the reviews on this site, I do not believe that this is a rare issue. They offered a 25 dollar coupon to buy another one. I do not believe I would do that. GE has had microwave recalls in the past due to fire hazard. I have registered a concern with the Consumer Products Safety Commission.

The GE MICROWAVE MODEL JVM6175EF1ES was manufactured in August 2015. I purchased it in November of 2015, brand new from Home Depot. It was not installed until April 2016. So less than 2 years after installation it malfunctioned. (The unit brand new only has a 1 year warranty). The parts the tech replaced have a 5 year warranty. That demonstrates to me that GE does not have a lot of faith in their appliances. Aside from that I paid $375 for the repair, thats almost the price of a new microwave. But I paid since it made more sense to have a 5 year warranty on the parts instead of a 1 year with a brand new unit. I WILL NOT be buying GE products in the future due to this product defect.

Our GE Cafe Appliance package is less than 1year old and the convection/microwave door handle is wrinkling and peeling. I realize that weight may be a concern hence the plastic vs. metal handle due to the side hinge of micro but aluminum or other light metal would have made more sense. A service tech is coming out next week to replace the in warranty handle however this cost will be our responsible next year when this happens again. A light metal retrofit/recall seems to be the logical solution to remain customer centric and maintain GE loyalty. How this material choice error is handled by GE to ensure this problem does not repeat during the life of this appliance defines brand loyalty. Thank you for your consideration.

I have had my GE microwave for over 6 years and the paint is flaking off the inside of the microwave, causing a health and fire hazard. Paint chips in the food and bare metal exposed can cause arching which in turn can be a potential fire hazard. After researching online I have found that this is not a uncommon problem with GE microwaves. Some have had this issue after 1 year. I contacted GE and told them of the problem and that I felt this was a manufactures defect.GE does not feel that this is a defect problem but advised me not to use the microwave any longer. Their solution was to discard this microwave and purchase a new one. I paid almost $300.00 for the original one plus $20.00 for a mounting kit. I was told that GE would offer me a discount on a new one from $339.93 to $319.93 total. This is not much of a offer considering this should be a obvious manufacturers defect. By ordering another I will have the same problem again. GE needs to stand by their products and admit fault.

I purchased the model (PEM31SM1SS) GE Profile (Spacesaver oven) in November of 2008. Less than a year later, it overheated and failed. Since it was still under warranty, the repair was managed by the appliance vendor. The scorch mark on the rear wall of the oven was and is still there. During the past year, the paint on the interior roof began to bubble and peel. There is now a broad area of exposed metal and the paint around the interior door frame is also peeling. When I returned to my vendor, I was informed that several other customers had the same issue and was told to call GE. I also checked online and found many other complaints for the same thing.When contacted, GE offered me a $75 rebate voucher, applicable only if I buy another GE microwave. The current price for this model - the only one anywhere that fits the space - is $279. Even with the voucher, this is still a lot to pay for a product that has proved to be defective. GE does not appear to stand behind its products. It used to be a reliable company but given the issues Ive had with both this microwave and my expensive dishwasher, I will be looking elsewhere in the future.

This review is related to the Monogram 2.2 Cu. Ft. Built-In Microwave Oven model #ZEB1227SLSS. The GE site: https://appliances.monogram.com/us/specs/ZEB1227SLSS indicates in two places that the built-in trim kit is included (and one place where it is listed as additional), yet GE has confirmed that in fact, the trim kit is an optional add-on with a $325 additional cost. Calls to GEs consumer line have been disappointing. Me: Your website says its included, and is in a section with other features that are in fact included but not additional fees; GE: We have confirmed that the trim kit costs extra. We have, in fact, purchased the oven and are awaiting its installation, and I have other experience with GE Monogram appliances so I expect this to operate well. But I cannot understand their reluctance to acknowledge this error on their site. Potential buyers, please beware of this issue.

We bought a new GE dishwasher 28 APR 2020. I noticed it wasnt working right about 5 months later. We are just over 1 month from the end of the warranty. The store where we bought it has been fantastic, but theyve been out 5 times to try to fix this sucker and they cant. GE told ME they would replace it if the store called to say they couldnt fix it, but when the store called, they refused. Theyre sending the repair guy out yet again one week before the warranty expires so he can call them and theyll talk about it while hes here. Ill never buy another GE appliance again.

We normally purchase LG appliances but this time we purchased a GE Profile induction range and GE Profile above range microwave oven. The relay went out on the microwave oven about six months after we got them. Their website for scheduling service is absolutely horrible and didn’t work multiple times and when I was finally able to schedule, it was two weeks out. I then called but was told I couldn’t get an earlier appointment. So we waited the two weeks, then they had to order the relay. GE waited until the part was delivered to us to schedule the return visit - over 2 1/2 weeks later! So at this point we are without our new microwave for over a month and a half. Moral of the story is never ever to tempted to buy from GE, LG appliances & cust service are great.

I purchased a dishwasher and it doesnt dry the dishes. It leaves the dishwasher and the dishes wet. I was told they have a fix. However, nothing has been done. If you want wet dishes, dont buy. They told me to raise my water temperature on my hot water tank and to run my sink water until it goes hot. They told me to buy Rinse Aid. Well, I did it all and it still doesnt dry. This is an energy saver appliance. Ha, ha, its because they are saving energy at our expense.

If you have a choice, run away from GE like the plague, because if you have to make a warranty claim, it may become a nightmare. I purchased a new home May of 2015, and my wife and I paid for the appliance upgrade to the GE Profile, which werent cheap. Less than 2 months I noticed that the microwave had a burn spot on the bottom of the door where it sits against the exterior of the microwave, the paint was burnt from the metal, and the rubber seal melted. I did not think too much of it because the microwave still worked and unless you opened it you did not see it, so it wasnt so much of an eye sore. Fast forward to January 2016, my wife informed me that the microwave stopped heating, and that she was going to put a ticket in to New Home Warranty, I informed her that we probably need to go to GE directly as I knew that is what they were going to say. So I called GE and put in a Service ticket. They informed me that it was going to be a little over a week before anyone would be available to come look at it, to which I was OK with. The repair guy finally came. I explained to him in detail what the issues were. He opened the microwave, closed it back, wrote some things on his computer, and told me that he ordered a part called the magnetron tube, which sounded like something from the transformers. He told me it would be a week before the part would be ordered, so I asked him if it wouldnt be easier for them to just replace the microwave. He told me that it is a warranty repair and they have to try and fix it first and if not, then they will. The evening before the repair guy was supposed to show up to change the door and the magnetron tube, I got a voicemail stating that the part will not be received until the evening of the repair, so they rescheduled me for 2 days later. GE just assumed that I would be available, because I probably sit at home all day waiting for service repairs. I called back the number to see what was going on. I was adamant that they replace the microwave, because by this time it was already 3 weeks without a microwave. And with small kids in the house it was very annoying to have to put a pot on the stove every time you needed to heat anything. After 45 minutes, I was still nowhere with them, so I ended up sticking with their new appointment window. I was leaving for work 2 days later when I noticed the repair guy at another home in the community. I thought to myself why couldnt he have done our repair the same day if he were already going to be in the neighborhood? About 45 minutes later my wife called me and told me that the repair guy showed up to repair the unit, that they were supposed to repair a day later, only to be told that the damage on the door was caused by arching, and that it will happen again so the microwave is non-repairable, so they will have to replace it. He told my wife that she will be receiving a call from the warehouse within 24 hours to schedule the replacement once the microwave is available, but she could call the warranty repair department to see if they could expedite it. After another 25 minutes on the phone going back and forth we were told that it will be about 7-10 business days before the microwave may be available. Now it is good to note that the warehouse where they stock the product is only 2 hours away from where I live. So by the count of it by the time we receive a new microwave, it would have been about 5 to 6 weeks from the initial call to get the issue taken care of.

We have an under the cabinet microwave oven. I like the size of it and it works well. It is white so it gets dirty from cooking on the stove. It has a light on it for 2 different lighting needs. It has a brighter one and one for night time also. The buttons are really easy to use. Not hard to program it at all.

I am a licensed master plumber. I do a fair share of high end kitchen installs, I noticed that in the last 5 years that all GE dishwashers I installed had a whole lot of extra parts to be installed by the installer. For example. Today I uncrated and tried to roll a GE dishwasher I got 6 and a drip tray fell out. Then when I went to install the dishwasher in the cabinet I had to install 4 different rubber flanges. When I went to push the dishwasher in the flanges came loose and hindered the install. The the insulation jacket kept binding up. The last 10 of these GE dishwashers I have installed the dishwasher appears to be racked or not square. I had to tell the General Contractor that I dont want to install the GE dishwashers any more. Way too much trouble. I have much better luck and ease of installation with Miele and Bosch. The GE dishwasher are very frustrated to install. Bob Licensed Master Plumber since 1982Richmond VA

Purchased the Maytag MDB7749SBM stainless steel dishwasher in December 2013. The dishwasher and install totaled $700, which for that price and with Maytags past reputation, I wrongly assumed that the dishwasher would last a long time. In May 2016, slightly over 2 years, the dishwasher started having issues with the control panel. The control lock would randomly activate. I would have to reset the circuit breaker daily, leaving it off for around 10 minutes. Even with trying to go through all the steps to resolve the issue, resetting it from the circuit breaker, sequence on the control panel, the dishwasher wouldnt work. I called Maytag and after 40 minutes on hold, they finally answered. They wanted $89 for a service call and for the $143 part, plus labor. Might as well just replace it with another brand like GE, or Samsung.

We just purchased a new home and moved in about a month ago. The builder would only put in GE appliances despite our protests. We had purchased another new home 2 years before with a new GE water softener and GE reverse osmosis system. In the 2 years we were there, we had service people over on multiple occasions because they never worked correctly. The common message from all the service people was that GE makes junk. Corporate designed garbage designed to last only as long as the warranty. Dealing with GE was always a nightmare with long waits and customer service that worked banker’s hours. In other words, GE does not stand behind its garbage.In any case, we just bought another new house and the signature series microwave (billed as the best they make) would start to run spontaneously and beep when nobody was near it. We had to shut off the power to it just to make sure our house did not burn down. We researched it on the web and determined the keypad was bad. We told them this when we called in the warranty. They took a week to send a technician who would only work banker’s hours and forced me to take a day off work. He gets here and tells me that he had just tested the microwave and learned the keypad was bad! Duh! He then proceeds to tell us that he did not bring a keypad and that he would have to order one that would be mailed to our house. We live on a new street which address is not recognized by FedEx so we told him he needed sent to himself. He refused. He assured us that we would get it. So, Friday 3:00 pm rolls around and no part shows up so we call to find out what is going on. Mind you, I have already scheduled Monday off work at this point. They tell me that the part is back ordered and that they have no idea when they can ship it. Additionally, they have a wrong address for our house. We tell them the correct one and they tell us their computer does not recognize it. She cannot tell us when the part will be available. We tell her that this is unacceptable and that if they cannot replace the part, they need to replace the microwave. She says that is not her department and we have to call their customer department on Monday which is open from 8 to 5 pm Eastern time! We live on the West coast!!! That means they are only open until 2:00 my time and I have a job where I cannot make calls during the day. I can’t do it at lunch because the hold times are over an hour!!! I guess I have to get up at 5 or take the day off.When I tell people in the know about this, they just laugh and say, “whaddya expect!?!, its a GE!”. We have been about a month with a brand-new microwave that has never worked and GE is impossible to reach and has not even ordered the part!!! We are toying with the idea of just replacing the piece of junk with a product manufactured by a reputable company like Samsung or LG from a box store who will honor returns and take the home builder to small claims court. In any case DO NOT BUY GE PRODUCTS!!! You have been warned. They make cheap junk that never works right and play games so they dont have to honor their warranties. This is a New York Corporation run by people who do not care about customers, honor, or integrity. They make backdoor deals with shady homebuilders to peddle their junk exclusively and you will have to replace it in two years. Learn from our mistake in buying GE. They bring junky crap to life. Garbage Electric is what they should go by.

The looks are ok. It works great, not too noisy. Wouldn’t mind replacing it with a different color and apparel. It fit great over the oven and is a space saver. Cleans up well, not too hard to clean. Not sure of the exact price, but I remember it was very cost efficient

Our GE microwave, manufactured in 2012, has been running fine, but the door handle has cracked on the bottom. Imagine my shock when I found the cheapest price for a PLASTIC handle was well over $100. How can this be?

My dishes always come out clean & the glassware always sparkles. I can use normal, heavy or light cycles. I can use heat to dry the dishes or turn that feature off & let them dry themselves. I think its just a normal size. Its white & matches my other appliances. This is the first GE Brand that Ive ever had. Ive had KitchenAid & Frigidaire models in the past and this one is as good as the others were.

Installed 07/06/2015 While I was asleep on 12/09/18 the oven appeared to start microwaving an empty oven on its own. When I came down 5 hours later the microwave had no power. I opened door and turntable had melted and glass had exploded. The ring under it was burnt and melted in one location. Top of cabinet on right side was hot. Then the internal circuit breaker restored itself and started some recovery process making odd noises sounded like the magnetron was trying to run since the top was getting hotter, after a minute the internal circuit breaker shut it down again. I then unplugged it. It appeared the magnetron started heating on its own and turntable did not rotate. All of the heat was concentrated at 12:00 edge of glass turntable. It also burnt the metal floor under that spot.

GE factory services uses rude, discriminatory, evasive, procrastinating and unethical business practices to limit customers from claiming warranty. We have a non functioning dishwasher which is under warranty. This came as part of the appliance package given to us by the builder (Hallmark Homes) when we bought the house in December 2017. When we contacted GE customer service to let them know that the dishwasher wont work, they gave us a date after 2 weeks for sending their service professional. After 2 weeks, their service professional came in and behaved in an extremely rude and racist manner shouting at the top of his voice for the inconvenience caused to him for coming to repair the appliance. After connecting his computer to the appliance, he said it was fixed and left without even checking if the appliance was working correctly. Even after repeated requests to check the functioning of the device before leaving, he threatened to be physically violent if we still pestered him to stay. After he left, we realized that the dishwasher wasnt fixed when we ran a wash cycle. We again contacted the customer service to let them know that the issue isnt fixed and requested them to expedite things to get it fixed. They said that we will get the next date for a service appointment again after two weeks and there is nothing they could do. After living the nightmare of washing dishes for more than a month, the same service professional came in again and repeating his similar rude, racist, unethical and threatening behavior left without fixing the issue. He said that GE appliance is not owned by GE anymore and hence nobody cared about what happens to the customers. He again passed the buck to the customer service and said I needed to take up this issue with them. In this whole back and fort, we are left devastated without having our dishwasher and living the nightmare for more than a month.

Absolutely silent! Several features and cycles such as crystal, normal, pots and pans and drying options such as air dry or heat dry. Standard size dishwasher. The key is in the loader. Stainless steel with no handle or anything plastic. Flush. Stainless interior as well. It did have a food disposal but to avoid smells since we start the dishwasher only twice a week, we rinsed off our dishes. Another important element we learned from the previous dishwasher is to use the heat dry if you want your load to be dry with as little puddles of water as possible.

The WORST Customer Relations Department & GE Dishwasher EVER 1. Ordered dishwasher & Scheduled Delivery. 2. After my 4 hour window of waiting, I was called and informed the installation needed to be cancelled due to the installer calling in sick. 3. During installation, they dropped my dishwasher & dented the door. I rejected the dishwasher as my other one was already hauled out. 4. Due to my hectic work schedule, my dishwasher was installed about 2 weeks later. 5. Dishwasher was not cleaning. 6. Technician came out another week later and I was told it was MISSING parts from the manufacturing plant and should have never passed QC. In addition, It was missing the bottom spinner and the top spinner was snapped off. The technician glued it back on.7. Called Customer Relations to get the runaround saying, its not their fault it came from the manufacture missing parts.In closing, I own a large apartment complex and have many BUSINESS friends. I will NEVER buy a GE product EVER again and to think of all the people I know, Im going to share my horrid experience with everyone I know. This will make great conversation when golfing too.

Model JVM1740DP1BB - GE Microwave - complaining since November 2014. Great microwave UNTIL the inside ceiling bubbled and began to flake off in various locations. A service tech that visited our home advised us to call GE and advise them of a potentially hazardous situation. The GE rep offered to sell us a new microwave but only stated that we were out of warranty, although this is clearly a manufacturers defect! She proceeded to tell us the lining was perfectly safe but maybe we shouldnt operate it. I have written GE management to see if they will assist in replacing the defective unit; GE is the reason we purchased it to begin with (but it may be the reason never to purchase one again).

Have had my GE dishwasher for 15 years. Had initial problem with inner liner pulling away but got GE to replace unit. Has worked fine ever since. Nothing fancy just gets the dishes clean. Would have liked a bit more adjustability with the shelves.

The GE microwave installed in my new home caught fire on its own. It is less than 3 years old. GE Consumer Relations Department refuses to replace it for free even when it caused a fire accident on its own. GE microwave failed in its safety standards. GE also has failed in its Consumer Relations. I will not trust GE brand again.

We recently purchased our second dishwasher in 16+ years (the other one (a Kenmore) is still running fabulously but staying with the sale of our former home - however I am tempted to swap it out with this new one from GE). This beautiful inside and out dishwasher has a couple main flaws that has me wanting my old dishwasher back. The buttons on the front are super sensitive, causing it to come on countless times a day as we get items out of cabinet above. This is not something we thought about. Our old one had the controls on the front but they were under plastic that you pushed... not actual buttons like this one.The second issue is minor. The rack on the bottom is set up very wide on one side and our dinner plates are smaller than some and they do not sit firmly in between the tines. The spacing is great for larger plates or serving items but not for medium size plates. We use a lot of bowls so the other side with closer together tines is always full. Like I said just a minor flaw. Lastly, the unit puts off a high-pitched sound during certain parts of the cycle. It is not really loud but it is bothersome if we are still in the kitchen when it is running.

The GE dishwasher was in place in the home that we bought in 2017. I like the stainless steel outer color, the noise level is minimal, which I like. The options for different cleaning levels are great. It does a good job at cleaning our dishes. My only negative comment is that it was new when the house was built in 2017. For the past three months it has been stopping repeatedly, multiple times, mid-cycle so that you have to repulse the start button multiple times to finish the cycle. It is barely three years old and seems to already be giving out which means we will have to replace it, probably soon.

I purchased my machine in 2019. The only concern I have with this machine is that I’m never sure of the amount of water that fills the tub with some features that I’m not used to. The tub on this machine enables me to wash very large loads including my queen size quilt. After washing, my clothes are practically dried which cuts down on my electric bill for the dryer. The drain and spin feature allows for a drier finish. Everything else is good. As long as you’re using the right soap the clothes are the cleanest.

I am now facing my 5th repair appt about my 2 year old microwave. I have spent nearly $300 on repairs to be told I can purchase a new one for 50% off. Well, $426 plus my $275 I have paid IS A NEW One! 20 hours of me having to be available for service. I did not know the life of this appliance was 2 years. GE complaint number **. This is an unacceptable resolution offered by GE!

Month Long Dish Washer Installation from Hell (Try #3 the best).Install Try 1 (I took off work for): Oops, I ordered the wrong hose. I am going to have to come back next week to install. I will call you and set something up. (installer). Next week Friday: Hello is this GE Installation services Umm its Friday and the guy never called or showed up this week to install my dishwasher I just purchased??!? (me). We then set up a time for the following week. How unprofessional.Install Try 2 (I took off work for): Umm still didnt bring the right hose. Can you go to Home Depot for me and buy the right one and bring it back? (installer). Ahh No!?! This is your problem not mine. (me). Well I will have to come back then. (installer). You have to be kidding me. I have to take another day off work?!? (me). Finally he gets a guy to come with the correct hose. Umm, can I borrow a screw driver and some tools from you?(installer). You have to be kidding me, sure? (me). Installer proceeds to drop the sides and fumble around banging the pieces on my NEW floor. Finally getting it installed. It doesnt look right. Dont the feet raise up and shouldnt the dishwasher be flush to the cabinets????!? and it looks crooked?? (me). Nope. (installer). I file a complaint and the guy removes my $60 install fee and sends another team out to fix it.Install Try 3 (I took off work for): 3 guys come and re-install dishwasher worse than the guy before them. From the other room you hear banging around and Oops, I broke a screw etc... This is what happens afterwards. Umm the plastic backing and sides are showing. Its pushed out farther than it was from the first guy. It definitely is NOT supposed to look like that. Plus its loose??? (me). Best we can do. Bye. (install team). This doesnt seem right....(me). Oh no, its leaking!!!!!!!!!!!! (me). So I called a plumber to come ASAP as I said before its NEW wood floor. New Plumber NOT associated with GE or Home Depot (who I probably will be getting a nice bill for calling last minute) proceeds to fix my dishwasher for the next 4 hours...Here is a small list of problems: 1) its leaking; 2) the foot vibrated off; 3) screws broke off; 4) damage to hose; 5) bottom plate installed at angle not even remotely level; 6) scratched up floor and cabinets; 7) installed too far forward and too low. This is the list. So far we still are trying to figure out where it is leaking from and if the dishwasher even will work. Thank god I actually got a Professional this time unlike GE/Home Depots teams. I then called GE Install services 1-800-432-7167 again and this is what they had to say: We already refunded you the 60 dollars. There is nothing we can do but we will file your complaint. I called again to speak with a manager and after a long conversation, he gave me $62 off my order. -- And let me tell you that is not going to cover the cost of the plumber I just hired to fix your mess. Not to mention the 3 days off work I took. Irritated I hung up. I bought a fridge, cook top, and double oven with GE along with this dishwasher. I wish I hadnt given them my business. Apparently, I am supposed to call back if the dishwasher doesnt work when my plumber is done working on it. Oh I WILL be calling back, you can bet on it. As for now I just hope he finds the leak... Moral of the story is NEVER use the install services they offer. You are better off getting your own plumber from the start.

GE has agreed to replace and install my microwave. I am very satisfied that they understood my concern in this situation and agreed to my request.

We purchased a new home in 2014 with all new GE appliances. The dishwasher has never cleaned the dishes. I have to wash the dishes before I load them in the dishwasher. I might as well use the dishwasher as a drying rack. We had a service person come out before the warranty expired. We have used all of the proper cleaning recommendations and setting per the service person. Not even 2 years later, the dishwasher started leaking and ruining our hardwoods. The dishwasher was quiet but then started making a horrible noise and a burning smell emanated when door was opened. Unfortunately all of our kitchen appliances are GE. If we replace any of the appliances, they will not be GE. I will also be getting in touch with the builder of our home to let them know that GE appliances are not reliable. GE needs to recall this dishwasher.

I purchased a stainless steel GE dishwasher for $508.68 since I remodeled my kitchen October 2016, I contacted GE in March 2017 because the stainless steel on the dishwasher door started to have rust spots, they sent a technician to look at it, they told me that they cannot replace it because the aesthetic warranty is only good for 30 days. They authorized the technician to replace the door, however I have the same issue with the new door, and also the dishwasher stopped working. I contacted them again. The technician was able to fix the dishwasher, but as far as the stains on the door they told me thats an aesthetic issue. They cant do anything about it. I called the consumer relations department. I spoke with CIARA GE case # **. They offered me a small discount and I have to come up with $400.00 to buy a new dishwasher.I feel that a good business should always stand behind its products. The dishwasher obviously is defective, they sold me an appliance that supposed to be stainless steel but its something else, the right thing for GE to do is to exchange the defective product for the right one. I am very frustrated that in less than a year I have to spend over $900.00 for a dishwasher. I am great customer for GE, I remodeled my kitchen, I purchased a GE refrigerator, cooktop, oven, kitchen hood, microwave and dishwasher, I think I deserve better than a small discount for a defective product.

I own a GE Model #JNM1731DM1CC that came with my condo, in March of 2008. After two weeks, the tray was spinning, and nothing was heating up. They came, and replaced something, and it worked again. It is now November of 2011, and the ** thing doesnt go off. When the timer stops, and you open the door, the table turns, and the microwave is on, letting rays come right out at you. I have to unplug it after every use, so that I dont expose myself to rays coming from the microwave. I spoke with several appliance repair shops, and they told me that it is probably the circuit board, and that to repair it would run at least $200. I am so disgusted with GE. I also have a stove that practically blew up, when the door shattered, after only having it for six months. They had to come and replace the whole glass front. I doubt very much, if they will help me, because it took at least 12 calls to get them to replace the glass door, with the glass all over the place, and inside the oven, four days before Easter dinner at my house.

This dishwasher was in the home we bought and its just not a good one at all. We dont like the settings.. We dont like the size. Weve seen better settings on other dishwashers when shopping around and pricing for a better one.

Dishwasher has been running 3 hours and it still has not finished. It is the loudest dish washer I have ever owned and this is the 5th house I have owned. To top it off I just paid $270.00 for a GE professional to come to our house to troubleshoot our problems and it fix the issues. Guess what, problem not fixed and GE has my hard earned money. Thanks, GE.

I am using a GE Profile Spacemaker 2.0 microwave that is almost 8 years old. I loved using this microwave until the touchscreen cracked under normal usage. Has anyone else had this problem?

I purchased this dishwasher 2 months ago and am VERY disappointed with its performance. For an appliance that claims energy efficiency it is a total failure. My last dishwasher was a Kenmore that I had for 15 years. It outperformed this thing in every aspect. Since purchasing this dishwasher my water bill has gone up and my energy consumption has gone up. Why? Because I cannot put plates close together in this energy hog or they will not get clean. I have to do twice as many washings as I used to for the same results. This piece of junk has NO WASH PRESSURE! All the dishes must be pre-washed in the sink to assure satisfactory results AND I must use the hot water boost or they will not get clean. Energy wasted doing a pre-clean and energy wasted with hot water boost - bad combination! This product is taking me backwards in savings and environmental damage.

This dryer replaced an eight year old Frigidaire Gallery Series. The new GE dryer is drying clothes much quicker. I have read some reviews complaining of the buzzer, but it is a nice feature to know when the cycle is about to complete. The nice thing about this dryer is that it has the right amount of dial drying features needed without a bunch of electronics that can typically cost a big service call if gone bad. Also the bottom rear of the dryer allowed enough room for the exhaust to go either left or right behind the dryer with it still sitting close to the back wall. I was lucky to find this as an open box item returned to the store because it was not a gas dryer for the first buyer. Photo shows exhaust located to outside wall.

My GE microwave is the Advantium version which’s heats to a 1000 degrees. In fact, today the 4th of July I will be using it instead of the BBQ. I have baked, broiled, heated and other things in this unit. This is my 2nd one over the years and I enjoy it immensely.

Unit is only 7 years old and not greatly used (only two adults who dont use it much)… Purchased as part of package including GE refrigerator, range and dishwasher (already got rid of refrigerator, as parts kept breaking and unit had other chronic problems). I turned the microwave on to make popcorn - it immediately made a terrible noise and filled with smoke with an electrical smell. Unplugged the unit and contacted GE Repair. When I described what happened, I was transferred immediately to their safety unit because of the nature of the problem. A GE technician arrived today and almost immediately diagnosed the problem: a metal component that directs the waves of the microwave generation tube had burned out, and by federal regulation, he claimed, cannot be repaired - the whole appliance must be trashed and replaced. Once again, I have experienced GEs poorly engineered products that appear to be designed to fail in a relatively short time. Can you spell planned obsolescence? (No photo provided, as there is no external visual damage).

I purchased a new GE over the oven microwave to replace a 10-year old Spacemaker unit. After three weeks of use with no issues, the unit overheated excessively during a normal use. The heat was so intense that the pegs that hold the racks melted causing a severe burn on my sons thumb. I unplugged the unit fearing further injuries and/or fire. Are GE products manufactured poorly or did I get a lemon? Who knows? Anyone else have a similar issue? I am still waiting for GE to respond.

I was sitting on my couch and I heard something running. I walked into the kitchen and saw my GE Profile microwave was running. At first I doubted myself and thought maybe I did something and then I cleared it out and went and sat back down. It did it again and again several more time. This is very scary. It was running like someone had set it and it was getting hot inside. Im not sure what else to do. The last time I had the same type of problem and just bought a replacement microwave and now this one is doing the same.

I own a GE over the stove Microwave that spontaneously turned on while I was sleeping. Once the unit was running for a bit, it caught on fire. It melted thru the glass plate before I woke up and was able to remove power from the unit and stop the fire. To GEs credit, they did send a tech out to our place. The tech never did anything to find out what caused the problem. Instead he was just looking to see if the unit was salvageable. He condemned the unit, and GEs solution was a $25 rebate on the next one of their products I would purchase.The liability GE would have been up for if I were not home would have been astronomical. This appliance put my property and the life of my family and neighbors in danger. GEs inaction on this problem shows that they have no concern for the safety of the consumers that use their products. The HR response has been appalling.

GE above stove microwave (DVM1850DM1BB) stopped working and went completely dead after 1 year. Purchased a second GE microwave because it easily fit into the existing space. Sure enough, the second microwave stopped working and went complete dead a little over a year. I have always heard bad things about GE products, now I can confirm those negative comments about GE products are true.

Purchased a GE Profile (oven and microwave unit) for over $3000.00 seven years ago. The protective coating on the interior of the microwave completely wore off down to the metal under the wheels of the turntable. GE calls this minor chipping (which it is not), advises to stop using the product, and offers a $100.00 off a new GE unit because they cannot fix it. The product should be recalled, just like Honda did when their Pilots were peeling.

I purchased this dishwasher in Sept 2017. Today after normal use, the motor stopped and it leaked a full load of water into my basement. I called GE service and got no satisfaction. Its out of warranty after 12 months. I then called their customer care department who really dont care very much. They wanted a GE tech to look at the dishwasher for a fee of $109. Then they offered 50% discount on parts. In the past, GE was always a reliable brand but no longer. Stay away from their dishwashers and every other appliance they make. It is not the GE of old. I just purchased a KitchenAid dishwasher and hopefully, that will work better.

I bought a GE microwave in June 2011. Paint started peeling off the inside top soon after purchase. Now, all the paint is gone and GE doesnt care and Walmart wont replace it. So today, I bought a Panasonic. Maybe it will last. Its fifty dollars cheaper, too.

Bought all new General Electric Appliances in 2002. Dishwasher, Washing Machine, and Dryer replaced after 6 years. Handle on Advantium Microwave replaced twice at the cost of $50 for handle made of plastic? Today our house smelled like burning plastic which upon inspecting dishwasher, found the heating element was COOKING everything in dishwasher. Got so hot that is melted the silverware bin and anything plastic in dishwasher. Glad we were home to unplug unit which we could not reset the controller on door of unit. Consumer Product Safety Commission is aware of this incident and is VERY common complaint with this Manufacturer. I have been on hold for 30 minutes with GE consumer relations phone number 1-800-386-1215. Was told by automatic system wait time was going to be 5 minutes. Figured I would write complaint on here as well while holding...READ CONSUMER REPORTS and stay away for General Electric Products!!! Model Number is PDWF480P00SS. Serial number is GS734641B.