I purchased a GE microwave from PC Richard and Son in 2011. The microwave is mounted above the oven. On March 13, 2013, the microwave (model JVM1750DP1WW) sparked a fire inside while my daughter cooked a waffle. After I contacted GE via email, the case manager (Misty) sent a technician to my home to inspect the microwave. This was free of charge. The technician claimed the microwave was able to be repaired and he needed to order touch up paint and a few parts. I was shocked that the tech claimed this was a simple repair and able to be fixed. I said, You need touch up paint? This is going to look horrible. How safe can this be after having a fire inside? He claimed it will look good and I would not notice the paint. I spent $411.00 on this microwave less than 2 years ago. I dont think I should have it fixed and touched up with paint to cover burn marks. The microwave went on fire. I dont want it fixed. Its not safe and should be scraped for safety regulations, not repaired and touched up inside with paint. The tech ordered a few parts and I immediately called the case manager Misty to stress to her my numerous concerns on the actions of the technician. I made clear that I was not satisfied with my microwave being fixed and painted when it went on fire, but would like a replacement. I told her I could understand fixing it if it was a broken part or electronic device, but not a fire. She agreed that she also would not like to have a fixed microwave in her home, but that GE can sell me one at a lower price of $150.00. Really, do they need the money that bad that they cant stand behind a dissatisfied consumer when their product went on fire? This could have been so much worse. Lucky my daughter was in the next room. She smelled, heard the fire and stopped the microwave. I paid the $150 just so I can have a working, new, safer microwave in my kitchen. But this is crazy and not good business ethic on GEs behalf. This should be set as a recall, not a repair. I contacted the service manager again stressing my complaint and feelings about paying this fee for a new microwave. She said again that if the technician says the microwave can be fixed, then theyll listen to the technician and fix the item. Well this seems a little one sided since the technician works for GE. No brainier. What do you think he is going to say?

The microwave is large enough for a whole chicken and operates at both a high speed and good efficiency. Most items can be timed within minutes of properly prepared meals.

We bought a GE dishwasher after owning a KitchenAid. The GE is quieter, washes better, takes longer, but it doesnt really matter. I use Quantum tablets and everything is always clean when we are done.

My dishwasher is doing the same thing as the recalled models. The GE Cafe model is not included in the recall. The dishwasher front, which is stainless steel, becomes so hot it burns to the touch and stays that way for hours. Burning smell in the kitchen! Cafe models need to be added to the recall!

We have a GE built-in combination oven and microwave. The oven gets up to heat very quickly and bakes in less time than recipes call for baking. The microwave is an 1100 watt unit and performs equally well, and has for 29 years, Our cook top is a GE glass top unit, installed 11 years ago in a kitchen upgrade, performs equally well, though not quite as fast heating as our old gas unit but much cleaner and attractive. Have never required a service call on any of this equipment!

We have a GE Profile Microwave/Oven combo unit. The paint is flaking off inside the microwave. Most of the ceiling paint is gone, and the floor of the microwave is flaking. Because we have a combo microwave and oven, the entire unit must be replaced. Thats around $2400. We cannot match the color, because they dont make bisque appliances any more. GE customer service suggests we replace the microwave with a countertop model, leaving the dead microwave on the wall. This is unacceptable.

I recently had a service tech out to repair my dishwasher. Before I knew it, he was opening the unit and found a tube looking piece stuck in the unit. He was at my house for 15 minutes and the bill was over $250. He should have asked if I was okay with the procedure he was going to perform and the cost before proceeding. To make matters worse, the dishwasher is not cleaning dishes now. I sent a prior email to GE a couple of weeks ago with no response. I would have never spent this money if I had been given the option and certainly now I have been charged for a repair that actually made my unit worse than before since it is not cleaning the dishes like it did before the repair. I respectfully requested that my money be refunded and/or be given a credit towards the purchase of a GE appliance and have received no response. I tried calling and have been on hold for over 30 minutes now with no one picking up, despite the fact that hold time stated estimated wait time was 5 minutes.

I have a microwave that has a rack inside which gives you options other than using the rotating plate inside. Overall it works quite well. I did not purchase this microwave, it came with the apartment. Not sure if I would purchase this brand if I were to buy it for my own home.

We have a GE profile dishwasher for about 14 months. I just found out last week that its out of warranty and that the 2 circuit boards inside are bad so the tech came out and didnt have a replacement board on his truck saying they never have problems with this dishwasher so hell order this part and be shipped to my house. He would install it on the following Thursday so Im sitting here waiting for service. I finally called to find out that GE decided that it is going to be repaired on Friday. I did not know this of course so I asked for a supervisor. I was put on hold with no answers, finally hung up in disgust.

First off: GE doesnt make some parts for this model anymore. The unit is large compared to many others; the upper tray provides adjustable height; one of the set of spikes in the upper tray rusted out because of inadequate plastic coating, and no replacement was available from GE; the control panel on the top edge of the door failed within warranty period and was replaced free; the holes in the rotating arms that spew water upwards onto the dishes must be cleaned with tweezers to remove bits of paper from labels. Those are all the negatives. The positives are that it is very quiet; a cycle takes about an hour; it cleans dishes well so long as they are not hidden from the water jets; pre-rinsing can help but is not necessary. I would buy it again.

Nothing happened...never has. It just wont wash dishes. I have to prewash every item that is put into this piece of garbage. I bought it new and have used it for 3 years. It remained in the box the first 5 years I owned it and it honestly did me as much good in the box as it has since we installed it. It makes a good rinser but wont even wash off a lemon seed left in the bottom of a glass. This is such a joke. I would never buy another GE product. The refrigerator I bought at the same time, a side-by-side, the entire front door froze solid within 2 years and we had to buy a new one. Your company stinks. This is a rip off of my money. Refrigerators and dishwashers are not cheap. Model GSDL122F02BB is the dishwasher.

Touch panel gets too hot from the stove and fails. Have to unplug it all the time to reset. Door handle unscrewed and inside coating is peeling. Had repaired three times. When least expected, I have to empty the cabinet above to reach the plug.

We lost our old refrigerator to a lightning strike and had to get a new one ASAP, and it had to be counter depth, a great ice maker, side by side, and not be a SS finish. My wife and I hated our old SS one but liked everything else on the old unit so we went looking for a new one that met these requirements. What a chore, this was not an easy unit to find as most everything now has a bottom type freezer. This was defiantly out of the question.

I picked the black GEGSD2100BK GE dishwasher for my co-op. It was cost effective (

My GE microwave, has been running fine, but the door handle has cracked on the bottom. This is the second GE microwave that I have purchased in three years. They need to do a better job with the door handle. I will never buy another one.

I purchased a GE Microwave Oven model # JES1139WL03 in late May of 2010. In early July, the paint started coming off the inside of the door when I wiped it with a damp dishcloth. I called Lowes, where I had purchased it, but was told that their warranty was only 30 days. I called GEs Consumer Support line and was told that for $65, I could ship the microwave to a repair center who would determine whether the machine could be repainted or would need to be replaced. I was told that either would require me to pay for it, since the machine still worked and peeling paint was not considered to be a warranty item. I guess if it catches fire, then they might warranty it.

Have used GE dishwashers before - were good. However GE no longer makes them, its just a name - now made by MABE (part of HAIER), Mexican with Chinese ownership, and this new one arrived with a factory fault - cracked tub which leaked immediately. Cracked tub seam and leak found immediately by service tech GEs site referred. Good news is the leak detector worked! Bad news - is we didnt install it right away (old one still worked and pandemic...) so it was a year before we got to it (was partly a gift). So - now MFR Mabe is giving us the run around and so far not doing anything about the faulty dishwasher they mfd and shipped through Home Depot. Dont be fooled as we were - GE is not actually GE anymore and the mfr HAIER/MABE are doing nothing to correct a factory mfg fault.

This GE CVM2072SM1SS Microwave (over-range model) worked fine for five years. Then, we discovered the plastic film over the touchscreen starting to peel. After a bit of wrangling with Consumer Relations, they sent me a replacement touchscreen. The LCD didnt display properly, so they sent me another one. It worked for three months, then in the middle of programming to reheat some food, we got the following error message: Control Fault, Shorted touchscreen - F10. The control has detected a shorted touchscreen and has shut off the oven. It may still be possible to use the oven. However, if this message continues to appear, your oven will require service.The only way to clear the message was to unplug the unit. No amount of replugging in cleared the message. I called GE and they said they would replace the entire unit with a new model under some program they had. Sounded fine to me. I left the house. When I returned, I received a message that their representative called back to say they would not replace the unit, since the program had expired. Huh? I called again, and after a bunch more wrangling, they agreed to send a service tech out and replace whatever needed replacing or fixing at no charge. Of course, they never really made a notation of that, so when he got here, he had to get on the phone and sort it out. Finally, he replaced the touchscreen. Lets see how long it lasts this time.

I have had a GE Profile countertop microwave for 13 years and it still performs great. I bought it at the time because Consumer Reports magazine rated it as one of the top microwaves. It performs well on all functions.

Had it over 12 yrs. Never a problem. It’s a wall mount microwave. Easy to clean stainless steel. A bit of a pain to clean the stainless steel inside of microwave. Would recommend the microwave to people looking for one.

The little trap door which releases soap stopped opening when the GE top-of-the-line Profile dishwasher was one week past its warranty. Because of the design, all kinds of crud collects under the hinged door, meaning there is ALWAYS an odor unless we get down, hands and knees, to scrub it out. Features are fine -- as long as they work. Having a dishwasher that doesnt even dispense soap and cleanser isnt worth much, limiting us to the automatic feed with shine liquid. Stainless steel outside is impossible to keep clean. There are streaks and blotches within minutes of polishing with Sheela Shine. Suspect it has something to do with the humidity where we live, but it shouldnt happen. I find it strange that GE is perpetually sending me warranty extension offers for my refrigerator (which never fails), but nary an offer for the dishwasher or microwave/convection oven in the Profile line which have each needed repairs twice in the three years since purchase.

Dishwasher works fine; however, do not like the interior which is all plastic. It comes with several tray holders which I found awkward to use. I wish it took less time and water to get the dishes done.

We have had to repair new appliances, the fridge and the dishwasher. The ice maker doesnt work and the water flows only when it feels like it. We paid good money for the Profile models in the new home. There were four repairs before these mentioned. Now we refuse to fix them any more. We will buy another brand next. We would never recommend this to anyone. Its sad for the company to produce such problem appliances for people. Obviously, they are not interested in repeat business. Now, there is this recall! It is annoying!

We had some oil spill in the oven, which proceeded to catch fire. It was a huge fire that burned for a while. But all it took was a little oven cleaner, and it looks like nothing ever happened! The coating and materials inside of the oven are completely fine. It also still works perfectly! I'm amazed. 10/10 stars.

GE Profile Microwave/Convection Oven JVM1790WK, over the range unit, CAUGHT ON FIRE while microwaving water for coffee. One of the four prongs that holds the oven grid in place started flaming wildly and smoking after about one minute of microwaving. My whole kitchen has an acrid awful burning smell. This is my second unit for a small kitchen, and I will be lost without this. The first one I had the handle fell off. This one is too dangerous to use. These units cost $600!!! I cannot afford to replace one every few years. Maybe this model and brand is bad news?

Figure it out GE! The sixth motor and mode selector for our washer has been reluctantly ordered by a tech this morning. The second motor was installed months after buying the brand new machine. Now, only two months since the fifth motor and mode selector was installed (Dec 2, 2011), the wiring harness is burnt up. The tech recommends replacement of the washer by GE, but only gets push-back from GE. This newest incident included a horrific smell of smoke. I do not trust this machine. I have a wife and child to protect. Think about it - do the math - add your costs for repeated repairs. You do not get to be a company the size of GE by not understanding simple economics. Open your eyes and replace our washer.

Purchased GE Profile dishwasher model PDT750SSF2SS, received three weeks ago. Within 17 days, door developed issue where it would not open fully. GE contacted, company not too responsive, miscue with technician, failure to reschedule, unknown when it will get fixed. Purchased as a complete set (dishwasher, range/oven, refrigerator, microwave). Does not say much about GE quality or service. Would not purchase again.

I purchased the GE Caf Advantium Oven Model No. CSA1201RSS. This is supposed to be one of their top of the line Microwave/Speedcookers and at $699.00 it should be. Within the first few months with little use, it made a loud buzzing sound and it went dead as if the breaker tripped. It was under warranty and a GE tech came out and repaired it free.The problem was the Magnetron, a key component inside the unit. I was shocked to see that the Magnetron was made by LG. I bought a GE because I did not want an LG, but I ended up with a GE with LG parts. The unit worked for several months and now it will not heat anything. I have only had this unit for 13 or 14 months and it is broken for the second time. I called the 1-800-GE-CARES to learn that they do anything but care. They told me it was out of warranty, but the parts are covered.It will cost me $99.99 for the tech to come out plus the cost of labor to repair the unit, which varies based on what needs to be repaired. This is unacceptable. There is clearly something wrong with this unit. I have had microwaves last 10+ years with no issues, and one of them was a GE! I thought GE would stand behind their products better, especially since they can see I had prior problems with this unit. This is a $699.00 tin can.

Our GE dishwasher cost $1,000. Reasons for not buying GE. 1. DOES NOT CLEAN DISHES. 2. Latch doesnt catch. 3. Rubber strip comes out. 4. GE customer service is useless. 5. Interior valve broke. Everyone w/ this model has same problems.

Purchased the cafe dishwasher in March. We are now on our second one as the first did not work and now this one does not work. It worked fine for the first couple of months and now it’s doing the same thing as the first one. Pump is on the fritz apparently. Truly disappointed. We owned the cafe dishwasher at our last house and loved it so we made sure that we purchased the same one when we bought our new house.

I also have a GE Profile dishwasher with malfunctioning wheels. I read this site, and was comforted and enraged that I was not alone with my melting wheels. I sent GE customer service a note, explaining my problem. I also included a link to this site in my note. I explained that I was a loyal GE customer and that they should stand behind their products although my unit was no longer covered under warranty and did not qualify for the recall. GE responded to my e-mail with in 12 hours. They sent me a complete set of new wheels for my bottom rack free of charge, and sent out a technician to install them, again free of charge. They also e-mailed me to make sure I was happy and no longer had concerns. I am thrilled with my experience. Let me say that again I e-mailed GE and within 8 days (a holiday included), I had new wheels and a technician to install them at no charge.

GE Cafe Series dishwasher model # CDW9380N20SS is a fire hazard. Three days ago, our GE Cafe Series dishwasher nearly caused a fire. If I had not been home that day, it surely would have. I ran the dishwasher as usual and went about my day several hours later. I detected a strange acrid smell and with my five-year-old who was ill and at home that day, discovered the dishwasher door was burning hot to the touch. I needed a potholder to open the door. Once opened, there was a blast of heat and smoke. I needed to use oven mitts to protect my hands from the heat to pull the racks out and handle the dishes. The heating element did not deactivate at the end of the cycle.If I had not been at home, the house would have been destroyed as all the plastic items on the top rack in the dishwasher melted. In addition the plastic parts of the lower rack, the wheels and their clips; the silverware holder; covers; the clips that hold the pot tins in place were destroyed, to the point that the majority of our silverware was coated with plastic. The plastic on the lower water dispenser has been demolished; it completely melted more than 50% of the plastic covering on the arm and is charred and burned. We are so lucky to still have a home!The door must be kept open. When the door is closed, the element super heats and presents a major fire hazard. We have noticed that there is a recall for similar models with plastic tubs, but ours has a stainless tub. GE needs to broaden the recall to include all these models. This is a serious issue that needs to be addressed immediately. Our GE Cafe Series dishwasher model #CDW9380N20SS was installed on October 1, 2008. I would not be surprised to find that parts from the recall in April 2008 were also used in the Cafe Series. I have discovered in the few days since the DW units malfunction that there are over 1000 complaints listed with similar, even identical complaints, on multiple internet sites with the same problems.

My experience with GE over range microwave oven (built in) as follows/ Unit Mod.JVM3160RF3SS. Ser.#GG248367A, this unit was produced April 2016. Review February 28, 2019, unit began to disconnect itself during normal use. This was done by way of throwing 15 amp breaker. New home with dedicated circuit = Yes. Online Problem shows indoor sensors interlocks not adjusted properly. Troubleshoot fee minimum $99 with parts estimate $250.00. We have been limping along for two months with frequent trips to basement resetting breaker, now the breaker trips when activated. Same thing happens on multiple circuits, via extension cord trial. Next step purchase NEW MICROWAVE that is not GE.

I have had it with GE! Only 18 months after install, my beautiful, stainless, three-rack, GE, top-dollar dishwasher will not turn on. Repair attempts have been futile. Tech said not to expect more than seven years service out of new appliances. Were tossing this junk and buying CHEAP replacements going forward since all we have to choose from is throw away products. OEMs like GE should realize they are shooting themselves in the foot with their planned obsolescence business plan.

GE Profile dishwasher - model # PWD8280N00SS - Appears that moisture got between the exterior panel and door that houses that main board. Because of the moisture caused a short that melted the main board, with harness and the ribbon from the on/off panel that connects into the main board. Luckily I was home at the time or this could have caused a significant fire damage in my kitchen.

I moved into a house with the dishwasher already installed and it didnt work. We closed it so we didnt use electricity but it started and wouldnt stop. The power button is broken. It just sits there and the lights are always lit. I tried calling for help but the workers were very unhelpful. I called a different number and was waiting a whole five minutes and no one picked up!

GE microwave turns on by itself, creating a fire hazard. We could not figure out how our plastic plates melted, until we witnessed the GE microwave turning itself on by itself. Also filed a report with saferproducts.gov. It may have to take a death of a human to have this dangerous product recalled by GE. Great business plan, GE!

I have a 15 year old washer/dryer set that has worked consistently and it resides at a rental property. I purchased GE washer/dryer set for primary home 4 years ago and it's awesome. It's the level 1-2 steps above basic model and has enough settings to fit my needs (maybe more than I even use) such as pre-soaking, 4 settings for loads and much more. I would not purchase anything besides GE appliances. Very reliable and easy to interface with.

I purchased a stainless steel GE dishwasher for $508.68 since I remodeled my kitchen October 2016, I contacted GE in March 2017 because the stainless steel on the dishwasher door started to have rust spots, they sent a technician to look at it, they told me that they cannot replace it because the aesthetic warranty is only good for 30 days. They authorized the technician to replace the door, however I have the same issue with the new door, and also the dishwasher stopped working. I contacted them again. The technician was able to fix the dishwasher, but as far as the stains on the door they told me thats an aesthetic issue. They cant do anything about it. I called the consumer relations department. I spoke with CIARA GE case # **. They offered me a small discount and I have to come up with $400.00 to buy a new dishwasher.I feel that a good business should always stand behind its products. The dishwasher obviously is defective, they sold me an appliance that supposed to be stainless steel but its something else, the right thing for GE to do is to exchange the defective product for the right one. I am very frustrated that in less than a year I have to spend over $900.00 for a dishwasher. I am great customer for GE, I remodeled my kitchen, I purchased a GE refrigerator, cooktop, oven, kitchen hood, microwave and dishwasher, I think I deserve better than a small discount for a defective product.

GE Dishwaser Model # GDT580SMF2ES - My husband and I purchased an entire suite of GE Slate appliances in 2015 when we built our custom home. We purchased the refrigerator, glass-top range, range hood microwave, and dishwasher. We have experienced problems with the refrigerator Model # GFE28HMHCES twice. A horrible rumbling sound, which they came out and repaired promptly. However, more upsetting is the constant problems we have experienced with the dishwasher. The door gasket broke, which we were informed was not covered under warranty, and most recently the dishwasher stop cleaning and will no longer dry. We have done everything to rectify or repair the situation ourselves, and since it is no longer under warranty, we are left with an appliance that we either spend more money on to repair or toss and buy a new one. NEVER AGAIN WILL WE BUY GE!

The GE microwave oven that was installed by the owners of my 130-something unit apartment complex caught fire in June 2014. The manufacture date is listed as December 2012. I moved into the unit in June 2013 and the microwave was brand new still and had never been used by anyone else. I myself rarely use the microwave and only use it for heating up cold food that I previously cooked on the stove top. After heating up rice using the 2 minute express option and removing the food from the microwave, I had gone to the restroom for 30 seconds only to return and find the microwave on fire. The fire ignited from the ceiling of the microwave. I had initially intended on going to the bathroom to take a shower but needed to open a new bar of soap, so I had only returned to the kitchen to throw the soap packaging in the trash. Had I not done the latter, my entire apartment could have caught fire and it would have been difficult if not impossible for me to escape from my third floor apartment. Reading all of these complaints it is really hard to believe that a government agency has not stepped in and forced GE to STOP MAKING MICROWAVES! From the complaints on this board it is clear to see that every year GE continues to make appliances that put consumers safety and lives at risk. You would think that after so many recalls that they would have perfected their product by now, but that is not the case. It almost seems as though they are just slapping new model and serial numbers on the same BAD product. The management in my building contacted GE and my microwave was replaced with another GE microwave manufactured in 2014. I did not want another GE microwave, but I only rent so I didnt have a choice. I used the microwave once so far and the fan automatically came on after 2 minutes of use. It does state inside the microwave that the fan may come on automatically, but I just dont trust this brand anymore. I have a countertop microwave that works perfectly fine that Ive owned for over 15 years that I will be using. I will unplug the GE microwave and just keep it for aesthetic purposes, since thats all its good for.

It is about six years old, great dishwasher. The bad part is the new detergent! GE profile, pre-rinse, preheat water, everything, including enough water. Hold everything, unfortunately, now aluminum must be hand washed. Good looking, curved front. Its great, I shudder to think what the new low water usage ones will be like. I HATE my new low water usage washing machine. I HATE the reformulated dishwasher detergent, can be used on anything aluminum, now I use lots more water hand washing all aluminum items!!!

Outstanding value and deal the price for this unit was the best one I could find it’s small simple to used and fit in my kitcjechm area like hand in glove I purchase then as matching pair for 429 dollars each all I needed for my new home and they are not bad looking at all,simple set up and great functionalities for the money no complains so far they get the job dome nicely thanks Best Buy’s for sucke great deal and quick delivery

I purchased a new GE washing machine, and a new GE dishwasher, less than 5 years ago. The washing machine started leaking suddenly, and the repairman stated it was due to a cracked basket. They stated this was very rare, but the warranty had expired. The repairs would cost as much as a new machine. The dishwasher stopped draining water. A repairman advised there were two pumps, and one or both may be out. Estimates to repair the unit were only slightly less than the cost of a new unit.I will never again purchase GE appliances. I believe the life of a home appliance should be longer than 5 years. The cheap units I bought in my younger years lasted 20 years, without any problems. The GE units are not quality machines, and repair costs are outrageous. Nice way to try and convince appliance owners to just go buy new units. I can guarantee, I will not buy GE products ever again.

GE cafe dishwasher, model CDT725SSFOSS - Bought new home December 16, 2014. Dishwasher worked well for a short period of time. Six months into ownership the unit began to leak and was quickly and efficiently repaired while under warranty. 10 months into warranty, the dishwasher began to rumble very loudly during every drain cycle, to the point where it sounded like it was going to walk out of the kitchen. Warranty tech showed up and had to order parts. Not sure which pump to replace he ordered both. Tech returns 10 days later and replaces both pumps. He turns power back on and the entire unit is dead electrically. Nothing works, pumps, motors, keypad, nada! Repair keypad was ordered along with a new wiring harness, just in case it was the source of the problem.2 weeks later, and one week before warranty expires, the repairman shows up and replaces the keypad and wiring harness. Yippie skippie, everything works but the tech is still confused, telling me the keypad lights should turn off at the end of the cleaning cycle, he could never make that happen. He completes his repairs on December 23. The unit performs flawlessly for 3 complete cycles, except the lights on the keypad never turn off at the end of the cleaning cycles.Sometime during the week of January 11-17 (while I was traveling) the unit dies again. Completely inoperable electrically. Follow up call with GE warranty service and the entire focus is on the fact that the warranty has expired. I keep pressing and the warranty person finally admits that service parts should carry a 30 day warranty. Service tech arrives and tells me he has to order parts. Keypad has been back ordered and I have no idea when it will show up.Totally unreliable expensive piece of junk. I can only imagine what the future holds. This experience seems to mimic Jack Welchs business philosophy to a tee - maximize profit and return to the shareholders while minimizing production costs and ignoring the customer needs completely. Highly recommend that you run any direction except towards purchasing any GE appliance, especially the Cafe series. Dishwasher. Nonexistent quality controls, no parts available, disappointing performance, extremely high price, P.O.S! DO NOT PURCHASE GE APPLIANCES. Negative Stars rating is what I would give this product. It will for good recycle materials at the scrap yard, sooner than later I am afraid!

This dishwasher was provided in our new manufactured home. It is the cheapest and loudest dishwasher I have ever had. But to be fair, I didnt pick it out. My friend just bought a new Bosch dishwasher and returned it because it didnt come with a heating element! Make sure (with the new energy saver models) that it comes with a heating element! Spots all over her glasses!

Have been using dishwasher (PDWT380VOOSS) since May 2013. Dishes do not come clean and I rewash by hand... have followed all suggestions by consumer relations, service technician and manual…cant afford to replace appliance…GE willing to replace at an aggressive discount because the appliance is working as it was designed to…disappointed in performance of a profile appliance.

Adora Microwave - door falling apart: This microwave is supposed to be installed above a range. The materials are not suited to this. The plastic door has disintegrated. We have got through 2 handles. I took the 2nd one off to replace it and the plastic that holds the glass in place just disintegrated onto the floor along with much other plastic parts. Why is the door plastic in the first place if they cannot make it from a heatproof material? Only 4 years old and we are going to have to junk it. When the first handle failed under warranty GE said that it was not covered as it is a plastic part! They finally covered it after a long conversation.

A GE water heater was installed in our new home in 1962. As of today, November 2, 2014, we are pleased to let you know it is still in excellent working condition 52 years later... Way to go GE... The only update we changed lower element twice in 52 years!!!

GE microwave model JES1344ES. This is a stainless steel with black accent 1.34 cubic foot microwave oven. It looks great. The micro is heavy for its size. The stainless steel is brushed and low luster finish. The door handle is chrome as is some of the other accent pieces. The push button panel is easy to read and has a large knob for making manual time adjustments. The light inside is very bright. There is a rotating platter in the oven compartment that is not knocked off of its guide rollers very easy. The push button panel is a glossy black material that is easy to attract fingerprints. The preset times that are programmed in the microwave is the only part of the product that could be an issue. For example the popcorn button when used has burnt all of the different brands of microwave popcorn that we have tried. It is set about 30 seconds too long. There is no way to adjust the preset time that I can figure out. We set the time with the large knob manually and the popcorn comes out just fine. The preset times for the Auto Defrost are also a bit off. They are not long enough. We also have a Subzero freezer set at minus 20 degrees Fahrenheit so that may be too cold for the defrost presets. Overall the microwave is great except for the preset times that Ive mentioned. We use it daily and have done so for five years. It still looks excellent inside and out.

I have many other things to do other than to voice my extreme and total displeasure with your company. GE - Huge Company, Small Customer Service. We purchased a GE microwave oven from ABT electronics in about August, 2013. In October, 2014 we had issues with the fan remaining on while the door was closed. Called GE. They said the unit was out of warranty by about 2 months. We felt that was a short period of time and that we called as soon as the issue became chronic.Had three service calls where the techs tried to fix a simple problem. First tech walked through our living room with dirty boots. Didnt fix the problem. Messed up our carpet. Bad attitude. Second call, two techs couldnt fix the problem. Said it was a door issue and they made some superficial adjustments. Problem not fixed. Third call, two more techs. Same result. In the meantime I tried to convince GE that I didnt want another service call. I wanted a new unit. No luck. I was offered a discount to purchase a new unit for around $300 or so. Im sure they spent more money on service calls than a new unit would have cost in terms of dollars and the reputation of one of the worlds biggest companies.Now, the fan for the unit stays on almost all the time after the cooking is done. Is this the best GE can do? If so, thats pretty sad. Tried to reach someone in sales who would get it. No such luck. DONT BUY GE AND IF YOU HAVE ISSUES DONT RELY ON A FACELESS, CLUELESS CUSTOMER SERVICE DEPARTMENT TO HELP IN ANY MEANINGFUL WAY.

First Profile microwave/oven caught on fire. Was replaced. Front panel on Profile refrigerator not reacting to touch. Repairman said that this model had problems. Fixed it - cost over $100.00. Dishwasher (Profile series) not worth the cost of heating the water to run it. Cleaned dishes by hand. Stove top died - not reacting to touch. $90.00 for repairman to visit us, and another $60.00 to tell us what was wrong. A lot of money for inferior products.

Our GE microwave stopped working after about 7 months of use. Ive never had a microwave break down on me before. Ive owned other brands which Ive used for years, actually lasted over 10 years. The only reason we purchased the GE microwave was because our old microwave was too big in size. I called GE for warranty service and it was very much of a hassle just to make the appointment. I had to call several times because a customer service representative misinformed me. It took a couple days just to set up a service appointment.Ive told the representative that the microwave stopped working and will not power back on again. The representative told me that the fuse probably went out. Something must have blown out. Finally, the appointment was made for about a week later, which was the earliest time available. It is so inconvenient not to have a working microwave even just for a day. Anyhow, the service tech came about two hours late. The scheduled time was for 8am-12 pm. He showed up close to 2pm. A family member was waiting at home all day because of this. Then the service tech told us that he needs to order a part for the microwave and that he will return a week later to repair the microwave.A week later, he didnt show up. No one even called. So I called back GE and found out that the appointment has been postponed! So now, we have been without a microwave for about three weeks. I think this is ridiculous. Im pretty sure that this is a common problem with GE microwaves and they already had an idea why the microwave wasnt working. It doesnt power-up! Now they are telling me that they dont have the part/s in stock? If I had known that we had to invest so much time and go through so much hassle from the get-go, I would have just purchased a new microwave three weeks ago. GE should pay me for all the time Ive wasted!

I purchased a GE microwave from Best Buy about a year ago. Every time I wipe it clean, white paint chips come off the inside. This cannot be safe for me or my children. I did contact the company and they were of no help at all. They said that because I heat up liquids in the microwave, this will happen. Duh! I would not recommend purchasing a GE product of any kind (oven, fridge, etc). Their customer service is awful and their products do not last.

I called to see if someone can help me figure out why my built in microwave is running but no heat. Apparently the customer service keeps insisting I need to schedule a service without offering any kind of help. Why do I have to pay for a service trip when I can fix it with the right part? Unlike other appliance they always have customer service helping to see and figure out what might be wrong to the appliance.

I contacted by phone GEs customer service department (800-386-1215) on 2 separate occasions. The most recent was on 2/18/13. About 4 1/2 years ago, when we purchased our new house, we bought all new GE appliances for our kitchen and laundry room. My biggest complaint is with our dishwasher. The top and bottom racks are rusting and most of the prongs have broken off as a result. This should not happen for an appliance that is only about 4 1/2 years old. Their response was that I could purchase both the top and bottom rack. Why would I purchase the same racks only to have it happen again? Clearly this is happening because they used a poor quality steel.There was a recall not too long ago on our dishwasher and the service tech who came out to fix the recall couldnt believe how badly the racks have rusted. I understand there is no warranty; however, you would think or hope that the racks would last a lot longer than 4 1/2 years. I am very disappointed in the quality and the lack of help regarding this matter.

Just bought a Monogram dishwasher one week ago, and the front sound barrier fell off. The service man came out, took a look, and said it was not a big deal. I questioned him why it fell off within such a short period. He stated that it was GEs policy: to make Monogram quieter than competitors, they put in sound barrier in front. However, it fell off often. Since it does not affect how the dishwasher work, GE does not believe that it is a big deal. Therefore, no need for quality control, and he will use new glue to glue it back. No guarantee that it will not fall off later... What is GE stand on the engineering products any more? Will never buy any more GE product...

GE above stove microwave (DVM1850DM1BB) stopped working and went completely dead after 1 year. Purchased a second GE microwave because it easily fit into the existing space. Sure enough, the second microwave stopped working and went complete dead a little over a year. I have always heard bad things about GE products, now I can confirm those negative comments about GE products are true.

I bought an above-the-counter GE microwave model JVM15405N155 and exactly after four years, it made a buzzing noise and just stopped. Now I knew why the dealer pushed the service contract so hard. I called GE service and the lady told me they cant troubleshoot the product over the phone. I should have never bought an American-made product, rather, American-sponsored as the product was made in Malaysia. Horrible service and never will buy one again. Where were the good old days when made in America was the Gold Standard?

Dont buy one. I bought two last year. The first one completely died before the 60 days were up. I took it back to Sams club and bought another. The tag inside says it was made February 2011, so its only a year and a half old. Under the carousel, the paint is peeling big time. I wrote GE repeatedly, asking if it was still ok to use it. After ignoring me for quite some time, I got this reply. In the notice, they told me to get Sams club to replace the defective and apparently unusable product they are selling knowing it is defective. I love the part where you cant cook something with too much liquid in it. Who does that when they microwave?Heres what they said: Thank you for contacting GE regarding your microwaves and the paint peeling issue. I did some research on it and found that it a common issue among all brands. Excessive heating of un-covered liquids can create a high amount of condensation that the inside paint is not meant to withstand. Minor chips to the coating on the microwaves interior cavity will not affect the products performance. However, if the coating is actively flaking or peeling anywhere inside the oven cavity (including under the turntable), discontinue the use of the microwave and replace it. GE does not have an approved method of repair, and the microwave is not repairable. Please return to Sams club for an exchange, if you are still within the one year warranty. If Sams is refusing to accept the return, contact the Sams Club Support Team at 1-877-885-2787. GE will then reimburse Sams club.

My GE dishwasher is 34 years old and it still cleans every dish, pot, pan and silver spotlessly. It has never needed a repair and the racks are in near perfect condition.

GE dishwasher GDT680SSH2SS - I don’t normally do product reviews... In this case, I am making an exception. This is without a doubt the very worst dishwasher I have EVER owned. I’m pleased with myself for buying the optional insurance when I bought the dishwasher from Home Depot. It has been repaired 6 times. It even had to have the main seal replaced. It flooded my kitchen and ruined my floor. My homeowners insurance sued GE. I think it worked fine for only 6 months...then it went downhill. It is extremely loud! It sounds like your dishes are being destroyed... No, I’m not exaggerating!I have NEVER had issues like this. I bought this GE as I really like the screen bottom so that large particles didn’t get caught up inside the pump etc... As I’m typing this, I have it set for Sani wash and the water isn’t hot at all, and it had standing clean water in the bottom when I opened it up this morning. I will also note, I rinse all my dishes before putting them in. I will never buy GE anything again.

Three years ago, we remodeled our kitchen and replaced all our appliances with GE Profile Stainless Steel appliances, stove, refrigerator, and dishwasher. Two months ago, the dishwasher, model PDWT580R10SS, stopped working. It was out of warranty, but the store where we purchased it said to call GE consumer service to see what they could do. They said that they would replace the parts for free if we paid for service. They said they would send a GE certified service tech to fix it. The two people they sent were dumb as a brick and after tearing apart the door, they decided that the controller board was bad and sent for a replacement. Two weeks later, they installed the new controller board and it still didnt work. They called GE and were walked through a troubleshooting guide and it was determined that the touchpad was bad. They ordered a touch pad and two weeks later, they arrived to install it and asked where the part was. According to them, it was sent to me and was at the post office, which it was not. They then asked to be paid for the three calls and I told them I do not pay for incompetence and would pay them when the appliance was fixed. Turns out, they gave GE the wrong address (their store) for the part and it was sent back. I called GE Consumer Service and talked to my rep who said she would send the part directly to me and that the service rep refused to work with me again and I should contact another service organization. The part came and it was not a touch pad, even though the packing list said touch pad. I called the GE rep, who is now a good friend and she said she would contact the store where we purchased the dishwasher and have them fix it as long as I paid for the parts. It is now two weeks since they arrived and diagnosed the problem. I just called the store and they said the part was backordered for another week. It will be close to three months before the dishwasher will be fixed if it can be. DO NOT, UNDER ANY CIRCUMSTANCES PURCHASE A GE APPLIANCE.

Has anyone experienced a plastic burning smell when the dishes are drying? My dishwasher is 3 years old and I wash on Light cycle which is suppose to be 45 minutes long but goes for 85 minutes. Company said to turn off circuit breaker and turn back on and it should be fine, it isnt. Last two times I used the dishwasher it wouldnt completely shut down so I had to do it manually and before I did this I could smell a plastic burning smell but there was nothing on the elements. I called for a service call but they were shut down for 4 days.

I have a General Electric HVM1540DN1WW over the stove microwave that I have had. This month will be a year and a half. The oven stopped heating so being a DIY person, I pulled the oven out and took it to my workshop to see if it was something I could repair. Inside the front panel was a very helpful schematic of the whole oven. Using the troubleshooting step listed on the paper, I found that the Magnetron tube had gone out. So I went to my owners manual and found that the tube had a four-year warranty on it so I called General Electric consumer relations to have the part replaced. First I had to fight with them because they said it was only covered for a year. After about an hour and a half on the phone and giving her the publication number on the manual, she agreed that it was indeed covered for four years. So she said that she would replace the part and she would even send a technician out to install it at no charge. I was very happy at this point. She said that she would ship the part to me next day with UPS and the tech would be out the following day to replace it. So far so good, till the next day when the part did not arrive. I called back in to General Electric consumer relations and spoke with a man this time and he told me that she had canceled the order that is why I did not receive it, and he couldnt see why. So he looked at the comments she had made the day before and did see that she said she would replace it and send a tech. The tech was supposed to be here the next day and I had no part for him to install. The man said he would place the order and have it shipped to me by the next day no later than 10 a.m. and the tech would be here between 1 to 5 p.m. Great! Until the next day and again no part when they said it would be there. Again with the call only to find out that it was scheduled to arrive next day guaranteed by 7 p.m. The tech is supposed to be there with in the next few hours and I wouldnt have the part. I called Fed-Ex and sweet-talked the lady into getting a hold of her driver to see if she could get to me ASAP. Bingo, next thing you know I have the part, the tech calls and the part is replaced. Oh boy, the big gaping hole above my stove is finally going to be filled once again. (I promise I am coming to the end.) After reinstalling the oven, I found out that it was taking longer to heat than when I got it, and it has a brand new Magnetron in it.Again with the call to General Electric consumer relations to set up another tech to come out and check it out. So the following day, the same tech arrives and puts a cup of just barely cool water in it and puts it in for 30 seconds, pulls the water out and says it is working just like it is supposed to and leaves. Well, again I called General Electric consumer relations to let them know what has transpired, but this time I asked to speak with someone higher up the food chain. I then spoke to a lady and she said that she would set up another tech to come out and check it out, and if it resulted in the same way that she would replace the unit with a new one. The following day, the same tech calls me and said that the oven is working the best that it could so I should call back to consumer relations as he did and set it up for a new one to be sent in its place. So I called once again and was not able to speak with the same lady and the only thing she could do is send me a voucher for $250 laying around for a new oven, but I would have to purchase one and send the voucher in with the receipt to get a refund. I told her that I did not have a spare $250 dollars around to go buy a new oven and then wait for the refund to get to me. So I asked that she have the lady that said she would replace it to call me back to straighten this problem out. Finally the following week, the lady calls me back and said, This is the best that I can do, due to me voiding the warranty. I asked, What? She said that the tech that spoke with me said that because I had hard wired in the unit to the house wiring, it was receiving low voltage so she couldnt do any better than that. I told her that was the most asinine comment I have ever heard coming from a field tech and asked her whether he went to a school backyard Techs-r-Us. I asked if she would have the tech call me to explain. I also gave her some friendly advice that she should not use that comment to anyone else for fear of someone laughing at her. We agreed to have the voucher sent if that was the best she could do. I will not buy another GE appliance again! I have purposely not mentioned anyones name because it was the experience, not the person that I spoke with.

I purchased a this GE Model CDT845P2NS1 on Oct 2, 2019 and the unit was received Oct 23, 2019. I installed the unit approx. 4 days after receipt and dishwasher functioned well until November 10th, 2020 when the unit failed to pump out the water. I contacted GE Service (MabeService) and was advised that the unit was not under warranty and as such I should contact a GE Canada authorized service centre.After several attempts to get someone to come to our location at Sharbot Lake we got hold of Capital Appliance Repair in Ottawa. They were not able to send a technician until November 18th. After diagnosing the problem the technician advised we needed a main control board and would have to order one and then come back to do the install of the control board. It is now February 21st 3 months after the visit and I’m being told that the part is backordered and they have no idea when it will become available. I’m extremely unhappy when you spend over $7,000.00 for a GE CAFÉ gas stove, Microwave, Refrigerator and dishwasher to find out you cannot get parts in a timely manner. As a customer of GE Canada I have had no help is solving my problem. It is not acceptable to have a 1 year old dishwasher that has failed, much less waiting for repair that has taken over 90 days to get repaired. DO NOT BUY!

GE Profile Microwave JVM1850DMCC - For the third time in 5.5 years, Ive experienced a magnetron failure in a GE Profile Microwave. The first failure was fixed under warranty. The second was so bad, the microwave had to be replaced, but it was no longer under warranty. I should have heeded the warning and gone to another brand, but on 12/31/10, I paid over $500 to replace the microwave with a new GE Profile to match the existing appliances. Apparently this was a big mistake as the magnetron has failed yet again. The microwave is on its own separate 20A circuit, so that shouldnt be an issue. It would seem, however, based on the number of complaints I see on this site, there is something inherently wrong with the manufacture of these microwaves, or more specifically the magnetrons. Im extremely disgusted at this point.

When the handle on my expensive replacement (GE Profile for GE Profile) microwave/convection oven peeled, we called our retailer (PC Richards is really good about service). A new door showed up and it, too, has a plastic handle. The difference is, this time its solid grey plastic as opposed to white plastic with silver paint. Seems to me that an expensive SS appliance should have an SS handle. Too heavy? Just use a tube of SS - not solid. Too hot if above burners? Didnt my last GE Profile micro/convection have a SS handle? I spoke with customer relations. The person was well trained not to say anything that might suggest she agreed with me. Since the issue is cosmetic and not functional, I have to consider the issue dealt with now that the door has been replaced. I told them I will do my best to publicize this issue and that I will never again purchase a GE appliance. I also called CEO Jeff Immelts office in Connecticut. I made it clear that my dissatisfaction has cost them a long time, loyal customer and that I would spread the word. I would appreciate if anyone agrees with GE that a SS handle would be too hot over stove burners.

Updated on 12/30/2018: Again had GE up, said it was not the pump as they stated. Hired a plumber as they requested, pipe not blocked. Changed connections and now the machine has no power. Again have to call for repair. I am sure they will have to order a part or tell me to call an electrician. I am so done. Please beware. Do not buy. Still not been able to use my dishwasher going on 4 weeks and brand new.Original Review: Purchased from Home Depot. I have had it for only one month used 4 times. The water did not drain. Called GE Repair. Guy came down, couldn’t figure out what was going on, said it must be the pump or it could be blocked. He went downstairs, could not find the pipe. Been there since 69...said he is going to order part. Waited 1 week. Then he calls me an hour before he was to be here. Mind you I took off work to be there. He said, “Did you have plumber to come in to see if there is a blockage and he needs to show you where the connection is?” Are you kidding me. I told him I am handicapped and having company for Christmas and I need it. He said he can’t come until I hire a plumber as he can’t find the dishwasher connections. Are you kidding?I said, “Can you come and install the pump and if it doesn’t drain then I will call the plumber.” He said no as he can’t find the connection...I am going to put 150 to have a plumber come when I know it’s the pump not a blockage to have the plumber show me where the dishwasher is connected because the idiot can’t figure it out. I said I need it for Christmas. Nobody working until next Wednesday. Do not get a GE. Poor customer service and to break down a few weeks after purchasing is unacceptable. I had A Bosch for 6 years, never a problem. Plus the lower rack tracks already fell apart. I live by myself and does not get much use. I read the reviews and should have known. The only reason I purchased I needed the bisque color. BUYER BEWARE.

We bought a new $700+ Stainless Steel dishwasher 10 months ago. It has failed on several occasions, and we have been without a fix or replacement for months. We are forced to have 5 service calls, none of which have fixed it. We have been hand washing for a family of 6 for months now, and GE Consumer Relations is totally unwilling to replace it, but rather continue sending out the same service tech with no new parts or ability to correct the problem. It is the definition of insanity while we are left holding the bag. Totally unwilling to do the right thing and it is maddening to say the least. 3 months of back and forth about our need to have it replaced, and their answer is send another service person who are now 0-5. This is the worst customer experience I have ever had in any situation for anything.

SOLVED: PDW9980L00SS GE Profile Dishwasher not cleaning dishes. The rubberized sump of this dishwasher suffers from chemical deterioration. In our case the deterioration allowed waste water to bypass a check valve and return into the wash water. Dishes dont come out clean and the spray wands get plugged up with bits of waste. The solution is to replace the sump. If youre handy with tools its an easy DIY job which requires pulling out the dishwasher and turning it on its side for access to the sump. Lots of videos online re the process and for safety start by shutting off the circuit breaker for the dishwasher power. For our model the new sump part number WG01L00289 replaces the original WD18X10026. Dishes & glasses now sparkle. Hope this helps as there was lots of frustration on this end before replacing the sump seen in the photo.

Very convenient. Easy to use. Take some time to clean though, have to cover all food for splatter of food on the topside inside of microwave, have scour off with strong pad. Also it is not radiation free for health. But the microwave is easy to lift. The best thing about it you can cook frozen foods. Like meatloaf, beef stew my favorite, pizza, chicken.

Microwave oven 2008 - The food doesnt go around anymore. The glass insert does not turn. What can I do?

Nine cycles but none of them dry the dishes. Very quiet, cleans the dishes very well. Like the third drawer, very handy. The only complaint is that it does not dry the dishes. No combination of cycles will dry the dishes.

GE has agreed to replace and install my microwave. I am very satisfied that they understood my concern in this situation and agreed to my request.

Not even a year after purchase of new cafe series dishwasher, stainless lining rusting. Service called, GE tech agrees rusting of lining, GE warranty says not under warranty. Ive replaced screws that show signs of rust with aftermarket stainless screws. Cafe oven has had three front knobs just fall off - two were repaired under warranty and had to purchase extended warranty on third because it was more cost effective. Cafe Refrigerator had drain plate in back of unit completely rust away, tech knew what problem was before he stepped foot in my kitchen, he told us this was common. He caulked some sensor inside fridge box during service, I asked why, his response was its a design flaw and unit will operate better with this modification. Oh and redesign the ice dispenser, its tilted towards the back of the freezer and the ice is dispensed out the front.

We bought a brand new GE dishwasher from our local hardware store on Black Friday. It was $600 dishwasher on sale. It was installed on December 5th, it broke on December 6th, and we had a repair man come out to take a look at it. To be fair, the local hardware store did ask if we wanted to replace (2 week wait time) or repair (2 day wait time) it. Since it was a bolt that was severed (by opening the door to the machine, mind you), we figured it would be an easy fix. The first technician who visited said, Yeah, its broken. I have to order a new bolt and then come back out in a week to fix it. And oh, by the way, Ill have to drill a new hole for it too. Thats when I called GE customer service to request a new product. But since my 48 hour window had passed, and we opted to have it fixed, it was keep it or ask our local hardware store to replace it at their expense. I bit the bullet and just had it repaired. Now, less than 2 months later, the technician has been at our house three times. He’s soon to have a fourth visit because we need a new dispense modulator. After speaking with customer service several more times, and with a not very nice lady in the Chairmans office, I still have a defective product. Oh, did I mention that Im paid hourly and have now taken off 13 hours? So what’s the use of that $600 dishwasher that we bought? Its been out of commission for more than 2 weeks, in less than 2 months, and has now cost us $900. Thanks, GE! We’re so glad to see you stand behind your product.

I just moved into a senior Community and the GE Dishwasher was already here. I moved from a condo that also came with a dishwasher, a GE, new. It was builder grade and I hated it. But I am really enjoying my GE in my apartment! This one cleans very well and is quiet. I like it a lot.

Purchased an entire line of GE appliances for kitchen after having prior (still working) appliances for 13 years. Have had at least 5 services calls and countless emails and phone calls for non functioning Dishwasher. Here is response from GE Manager: I have reviewed the pictures and no I would re-wash those 4 dishes if they came out of my dishwasher prior to using them with my family. Dried on fruit, starches and dairy are tough for any dishwasher to take off as the sugars in them act like glue. Again for these types of foods we would highly recommend more pre-washing to make sure that they are not left on the dishes after the dishwashing cycle. CAUTION: DO NOT BUY.

We purchased a new home November 2013, which came with all GE appliances. The problem is the dishwasher racks. The plastic has fallen off the metal, and the metal has rusted away leaving nothing to hold the dishes in place. I contacted GE and they said it is out of warranty. A new rack is over $100.00 and now I see the top rack is rusting also. I have never, in my seventy-eight years such junk. I am surprised GE would put their name on it...

Bought the new dishwasher in Dec. 2013. In November 2014 a month shy of warranty expire, the detergent dispenser did not release or partially released the detergent. GE sent out A&E Factory service to fix. First visit initiated the parts order which was a new computer board and a Cascade Series detergent dispenser. A month later the second visit to install parts, the A&E tech was at our home for 3 hours and it took that long to remove and replace detergent dispenser. The tech did not replace computer board stating it was not needed? A week later the detergent dispenser still did not release the detergent! Called back to set up another appointment which was at the earliest Jan 19th 2015. Meanwhile last Friday Jan. 9th 2015 the dishwasher started to smoke heavily causing smoke detector to go off at 9 p.m. at night. Thank goodness!! We were home so that I could disconnect the power. Third visit was 1/12/15 and was informed by Lead A&E tech that the board should have been replaced and that the tech that was sent out was a trainee and inexperienced to work on my dishwasher. He should of never worked on my dishwasher(!!) according to the Lead A&E tech. The Lead A&E tech also stated that my model has had a problem with the computer boards which is essentially the brain of the dishwasher. I am currently taking my fight back to GE since A&E Factory is a subcontractor to GE and is not authorized to replace appliances. I told GE that I want a new dishwasher that is not using the problem computer boards even if it is an upgrade. It is not our fault that they have work with A&E who send out inexperienced techs to work on complicated GE appliances. We want a dishwasher that we both feel safe to run while we are not home. Is that too much to ask for?

We bought a model PVM9215SK3SS microwave as part of an over-the-range microwave oven/extractor fan combo. Unlike every other microwave combo weve ever had in our frequent moves, this microwave cannot run the kitchen timer independently of the microwave. If you try to set the kitchen timer when the microwave is running, the cook-time changes and overcooks whats in the microwave. If you try to set the microwave to cook while the timer is timing a food cooking on the range, it simply refuses to work. The instructions are very hard to both find and then understand, having been written in China to cover many different models. Apparently I can ask my phone to turn it on. I sure cant manage that very often in person! The fan is too loud for comfortable use even at the lowest speed, which is a great disappointment. A former Profile model was very quiet at every speed, and much more efficient. Were saving up for something that works.

I notice when cleaning the inside of the microwave that the coating on the top (ceiling) of the microwave has bubbled and cracked and there is a hole in the interior top coating. This unit is about 9 years old, and is a dual unit as the bottom is a convection oven with very little use. Im told I need to replace the microwave. I have never seen bubbled and cracked interior in many years of owning and using this type of appliance. The photo shows the defects in the lining coating. Im really upset about this.

We purchased a VERY expensive GE dishwasher (Re: Case: 13259178, Model: PDWT580V00SS, Serial No:MZ841691B) for over $1500 and IT DOES NOT WORK! It actually DESTROYS dishes! It leaves a thick detergent film on plastic cups and plates and renders them unusable. We have scheduled no less than FIVE technician visits and all of them refuse to indicate that the dishwasher is faulty and needs to be replaced or they would likely lose their job. All they say in their report is that the dishwasher is performing normally. So a dishwasher that DESTROYS dishes is NORMAL? GE is a $265 billion company. They have a customer that is infuriated with a faulty product that they will not replace. They are giving us the runaround and it is unconscionable. Any other consumer focused business would have replaced their product by now. Not GE. They have a huge infrastructure built to keep consumers from getting their products repaired or replaced correctly. This feels like Davey Vs. Goliath but we are going to prevail. My advice to all consumer is to NOT EVER buy a GE dishwasher, unless they like to have their dishes ruined.

Very heavy to mount above a stove, not enough watts. The model I have is 900 watts, too many options for cooking different foods, not many parts are available to make a repair on any of the GE microwaves, I would not recommend purchasing a GE.

Our Profile over-the-range microwave failed after 2 years. (Warranty was for one year!) One day it suddenly died. The repairman ($100) said repeated twisting of the wire from the oven to the door (which contains all the electronics) is inevitable with opening and closing. The wire often breaks within its insulation: a bad design fault. No question of replacing the wire; we would have to order a new door, for nearly $400 plus $200 for installation, which requires 2 service technicians. This is more than the cost of a new OTR microwave. He advised us to get one with the controls beside, not in the door. Unfortunately GE is the only company that makes a microwave in the same colour as our range.

I love my GE dishwasher with sanitizing. It works great at cleaning, drying and sanitizing my dishes and it’s really quiet. I love the stainless steel. I forget it’s on at times because it’s so quiet. Happy with it.

We had a GE microwave that my parents got when I was in elementary school that lasted us through graduation (when I got it), and it then lasted me another 6 or 7 years after that. It was a great microwave, so we went with GE for our next one. What a mistake that was. The new one died completely less than a year after we got it (less than a year after its manufacture date at that!). The one after, one of the same make and model, lasted 3 years to the month after its manufacture date. Sorry GE, but I just do not have any interest in spending so much for so short a lifespan on your products, and its a damn shame that your quality has suffered so badly that you have lost a once-loyal customer of your brand.

My Microwave oven is 22 years old. It still works fine, but does not have power levels on it. The reheat is vague and I have to keep checking so things dont burn or dry up. The dishes get very hot after about only three minutes. Other than that, it is easy to clean and still looks good.

The dishwasher runs and works very well. It washes all dishes, pots, pans, glasses and silverware great. Weve never had any problems with this dishwasher thus far. I would recommend this dishwasher to anyone in the market.

This review is of a low end dishwasher with simple controls. It has a plastic tub. The racks seem poorly designed. Bowls are hard to fit in. It cleans competently if it has hot water when it starts and a high quality detergent. Its basic and does the job. Pretty quiet too.

Have owned, installed, and repaired many dishwashers throughout the years at various houses. This GE unit is by far worst dishwasher that I have ever had the displeasure to install and operate, and it replaces a Kitchen Aid unit that started a fire, see **. Specifically the GE unit had the control panel break off due to misalignment, requiring repair, the drain bulkhead fitting was poorly designed and caused a leak, requiring repair, the water solenoid valve failed in the 2nd year, and finally the door does not lock closed without significant care and attention to alignment and requires many attempts to lock closed for the start of cycle. This is the worst and I cant wait to pull it out and replace it.

I purchased a GDF520PGJ dishwasher from Home Depot and it still doesnt work. Home Depot has no return policy and G.E. has been unable to resolve. I have written to GE Appliances Consumer Relations for a replacement but pending another service call. Its unfortunate that there is no recourse with Home Depot as was advised that I need to work with GE for the first year warranty yet my dishwasher hasnt worked for the past month. Buyer beware.

July 4th, 2010 - GE Profile Dishwasher, Model: PDW9200N00BB, Dishwasher had been humming after cycle was over for a little while, this night I walk into the kitchen late and find it full of smoke. Circuit board has a hole burned though it and wiring harness is melted. Never tripped any safety, could close the door and it would come right back on, smoke and all. This model was not on the recall list but I called GE anyway. After describing the fire they send someone out, then they send a new dishwasher out and install it. I assume they wanted the old one to look over or just to get rid of it. New washer installed the end of July 2010, new model number PDWT500R10BB. Today is 2012-02-02 and the new machine would not stop at end of cycle (Got down to 1 minute and stay there for at least 20 minutes before we turned it off). This machine is now making the continuous hum after the cycle stops that the old one did before it caught on fire.Called GE, they said they could maybe go half on parts and service until they checked where I was located. (Wichita, KS. Area population 500,000+) They said that they didnt send factory techs to my area and I would need to contact a local repair service. I pointed out that they had a factory guy for when my machine was on fire and they said it was just a malfunction now, so they could not. No half on the price for repair either at this point. This is a $1100 to $1200 dishwasher with, as near as I can tell from complaints online, a history of going up in flames. I understand things break etc, but when you continue to put out products like this and then refuse to remedy the problem, I and anyone who will listened to me will never own anything GE again.

Does not hold as many dishes, pots and pan as my previous dishwasher. In the bottom rack I cannot place plates and bowls side by side. Rack is too small and the gray interior is too dark. And the top rack does not hold the glasses in place, already had one break.

Purchased new from Lowes. Dishwasher leaked starting less than a month after purchase. I have had it serviced 3 times since purchase and have another appointment scheduled. (It takes 2-4 weeks to get a tech out to your house). Currently they say he is going to come by on Tues and check to see which part to order next and then they will come back and work on the dishwasher when the part comes in. (Of course the dishwasher is leaking as I wait). They give a 8-5 service window so I will just have to sit here and wait on him to come by and decide what to order. This is pathetic. When you buy a new GE appliance you need to be aware that they literally do not have any program for replacing flawed appliances.

Microwave and convection oven together...perfect for heating food or baking. Very easy to operate. G.E.profile. Mounts over the stove with an exhaust fan and lights. Also has a rotating plate in it to heat evenly.

However, the GE Monogram Microwave ($499 at Best Buy) broke down 17 months later, a few days before Thanksgiving 2015. GE claimed it was out-of-warranty, and I would have to pay $99 to have a technician look at it, and would charge for repairs. We are stuck with the GE Monogram Microwave as it is a built-in unit and our cabinet is built around it. So we went and got a new one from Best Buy. When the new one came and when we removed it from the box, it had a large dent in it - a very large one. It clearly indicates a shoddy QC job, as the unit should not have left the factory with such an obvious dent. We asked BEST BUY to replace it, but a new one is not going to come till after Christmas. So it was 2 strikes against GE Microwave ovens for me.We spoke to GE and they were not very sympathetic, and amazingly did not even apologize for the inconvenience caused!! They just stuck to their out-of-warranty mantra, which I understand. But then the occurrence of a second event with another GE Microwave, and the inconvenience of sending back a big dented one was also not acknowledged or perhaps even understood by their CS representative. So it is strike 3 against GE Appliances for me.I would never recommend GE microwaves and was totally disappointed with the Customer service of the GE Appliance division. I also have GE Cooktop and two GE wall ovens and shudder to think what will happen if they should break down. Just sharing a sad experience that holds some lessons for me and my family and friends. (Rethink buying GE Appliances.)

I have a new GE profile model PDWT380VSS - Two in fact. The first one kept breaking glasses in the top rack. GE technicians could not find an answer so they replaced the Dishwasher. Now six months later its doing it again. This replaced a perfectly good, older model as part of a remodel. Theyll be sending another tech who I suspect will not have an answer. Any thoughts on what could be causing this or a way around it or is it to be expected? The first GE profile I had for several years with no such issues.

I have a 3 and a half year old GE Cafe Dishwasher which I paid over $1400 for and yesterday, when I ran it, I had a couple of cups melted when I opened it. This morning, I opened it to remove the remaining dishes. I closed the door to it and left for work. I did not run it again, just emptied it. My husband came home about an hour after I left to a house filled with smoke and the smell of melted plastic. He opened the dishwasher and found everything inside melted. The spinners, the silverware holder and all the plastic rack dividers were totally melted.Apparently, the heating element stuck on and overheated it. If he hadnt come home when he did, I believe our home would have caught fire. He said the whole kitchen was much hotter than the rest of the house. The service repair man said it cant be fixed because it got so hot it melted the seals in the motor. It was not a wiring problem with the house. It was a problem with the dishwasher itself. So now, I am out $1400 plus a house full of very toxic smelling smoke.