We have GE Profile Quietpower 6 Dishwasher. We are the second owners of the home and did not buy it ourselves. But the dishwasher is no more than 3 years old. Our dishwasher also refused to turn off after it was done washing dishes, usually humming for hours afterward. One day, we came home and found that the whole house smelt of burnt plastic. Our dishwasher was burning hot and full of burnt plastic. It was off, so we unplugged it to make sure it would cool down. We dont expect any help from GE, but we will never buy GE ourselves. And we will make sure to tell our friends to never buy GE.

I thought there were food particles between the glass plate and the ring. When I took out the plate, I saw that the paint had bubbled and was peeling off the bottom of the microwave. Extremely unhappy with this. Ive had hand-me-down off brand microwaves that lasted much long than this GE and with NO PROBLEMS until they just rolled over and died. I have all GE appliances in my kitchen and have to say that Ill never buy GE again. Electric stove is a problem, dishwasher a problem. Refrigerator was a problem (when it was new! it was fixed and thankfully is still running well).

I was advised to replace the timer #WD21X10059. I replaced the timer and it still doesnt fill water. I purchased this 2000 Hallmark Park model and the seller said the dishwasher has never worked. The model #GSS1800Z01 does not add water when turned on. The water line has been checked and is OK. Is there a service bulletin on this unit?

Horrible experience. I wouldnt recommend GE appliances to anyone. My husband and I ordered our items on the day of closing on our new Home. Well the items were scheduled to arrive Aug 9, 2017. Every other Appliance arrived from Samsung, but my GE dishwasher was a no show. I received a phone call hours later stating they didnt know it was on Backorder and I wont receive it until Aug 11, 2017.I spoke with supervisor Krista because I didnt understand the lack of respect far as not knowing if the 11 was a good day or even so much as an apology! Until I expressed how upset I was! 2 hours later I received a automatic message stating the items it still on Backorder and now its not coming until Aug 17th! I spoke with Home Depot who apparently has nothing to do with the vendor handling and conducting business this way and now I have to go return the product & order a new product.I dont even want GE appliances AT ALL. After calling today being put on hold 30 mins still no supervisor came to the phone. Terrible Customer service and lack of communication of the vendor. Ill be sure to highly encourage my friends and family to not support this Brand! Feeling upset and totally let down. I know this cant be how such a popular brand conducts business.

GE Triton XL dishwasher overheated for no reason and melted the inside components to the point they are scorched black. This dishwasher is worthless. There would have been a possible home fire if we were not at home at the time of incident.

Our stainless steel finish 1100 watt JES1142 microwave is around 2 years old. Within the last year the finish inside started to corrode (yes, my wife cleaned it regularly with a non abrasive, appropriate cleanser). Also, the door latch button started sticking and a few days ago it just stopped heating. Unfortunately I cant find my receipt, but I bought it at my local Lowes on Bell Rd. Nashville TN. Serial # is MA212483G. Manufactured July 2013. Was this just a lemon? Very disappointed.

The microwave is small enough for 1 person and yet big enough for a family of 4. I feel it cleans up pretty easily also, inside and out. This is also a stainless steel on the outside, that makes it easy to clean.

I have a 15 year old washer/dryer set that has worked consistently and it resides at a rental property. I purchased GE washer/dryer set for primary home 4 years ago and it's awesome. It's the level 1-2 steps above basic model and has enough settings to fit my needs (maybe more than I even use) such as pre-soaking, 4 settings for loads and much more. I would not purchase anything besides GE appliances. Very reliable and easy to interface with.

I own a GE turntable microwave. Ive had it for over 10 years and it is still going strong. I purchased it because of the capacity, the color, the wattage and features. The wattage in this microwave is amazing. It doesnt take long for things to heat up. I highly recommend this brand because it is so durable and the wattage it has. The features on the microwave are easy to access and has more features than I normally use. To have this microwave for so long and its still works just like I purchased it yesterday. Great job GE for providing an excellent product.

Getting great service out of it. GE Dishwasher is a good unit for the money. Its does a really good job when loaded properly. I did just extend the warranty for another year. I am very happy with it.

We bought 6 new GE appliances when we purchased a new home. The reason: my husband worked for GE for 35 years and we wanted tell our friends how happy we are with them! Now, we are sorry we have to complain about the dishwasher (Model #GDWF160R1OSS). The only good thing about it is how quiet it is. We have tried many different soap products, a little soap, more soap, Rinse Aid, half clean or nearly clean dishes placed inside, only to have the glassware looking horrid, not clean and cloudy. Service man offered suggestions but none have worked. The stainless steel interior also looks horrid because of streaks. So much for energy efficiency when we have to wash all our glassware by hand to get the residue of soap off them. Another dishwasher we have had for 25 yrs. does an excellent job - so dont blame it on the phosphate removal from soap.

JVM1540 - We replaced the microwave that came with our home above the stove. When we took the old one out, the blower was not installed properly for ventless. We thought that had to be the reason it just stopped working. We felt sure it wasnt GEs fault as we have always trusted them for a quality product worth the price. WRONG! I cant help but wonder if Lowes knows they are selling a costly piece of junk! When our new one quit working, we replaced the fuse 3 times, now it says keyboard is shorted service required. And thanks to this site I am tossing this piece of junk without spending any more money. GE shame on you!

Excellent. The dishwasher cleans dirty dishes and dries them as I expect. We use all the features periodically, usually the RINSE & Normal wash daily. We rarely use the China setting, but we do use the pots and pans and hygienic features as well. We also occasionally use the delayed start feature. Our dishwasher is a decent size four our family for daily use and for large get-togethers. Our house came with a WHITE dishwasher, which were not totally fond of as a personal preference, BUT, its LOOK and design are fine by our standards. We have had a problem with the door catching on the screw that holds the dishwasher in the cabinet. Seems like a simple fix, but it hasnt been. Id like to see that problem go away for any dishwasher installation.

Needing some type of warning to indicate a clog or break down. Cycle: Pots & pans; heavy wash; normal wash; light wash; hot start; high temp. wash; heated dry; energy saver; cycle on: plate warmer; start delay (hrs) off, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1; Hot start plate; Pots & pans start; heavy/normal; high wash; heated dry off-rinse only. The color fits my kitchen arrangement. Needs to have a better warranty coverage. Needs a longer warranty on the basic coverage. Do away with extended coverage. Offer all parts and full labor for a longer time.

Our brand new GE Profile dishwasher wasnt cleaning dishes (even after rinsing them before stacking them in the dishwasher). GE technician came several times and lectured me how I need to open hot water faucet before turning on the dishwasher, about how I should stack the dishes in the dishwasher, etc... all bogus talk. Our builder was kind enough to replace the dishwasher because he saw how frustrating it was to deal with GE service. The new GE Profile (i.e. replaced by builder) works without opening hot water faucet, or washing the dishes or stacking them in any particular manner. In summary, I wouldnt recommend GE Products because GE service is HORRIBLE and their products arent that great. I have GE Profile all over my kitchen. Within the first year, my microwave, dishwasher and built-in fridge broke down!!!

Absolutely silent! Several features and cycles such as crystal, normal, pots and pans and drying options such as air dry or heat dry. Standard size dishwasher. The key is in the loader. Stainless steel with no handle or anything plastic. Flush. Stainless interior as well. It did have a food disposal but to avoid smells since we start the dishwasher only twice a week, we rinsed off our dishes. Another important element we learned from the previous dishwasher is to use the heat dry if you want your load to be dry with as little puddles of water as possible.

I like the look of the oven but it took 3 shots to get it right. I had some bad luck with 2 out of 3. It seems the first 2 were damaged. I know many people would have given up but I owned one before this one and the only reason I gave it up was remodeling. The oven worked fine after 5 years. I guess I gambled on past performance and it still paid off. But I am really not sure about the door sometimes because it is a big door and it can seem tinnee and cheap at times. The overall performance is good and the looks are what I was looking for.

We moved into a new home in June of 2011 with the appliances already included. Ours came equipped with a GE, over-the-range microwave, model JVM1540DP1WW, manufactured in Malaysia, in April of 2010. Within several months, the revolving platter began to make a bumping noise while turning and then it eventually quit turning altogether. Five service calls later, we had the platter motor replaced, circuit board and four fan motors (apparently the platter has voltage supplied from that fan to make it run) and it still didnt work.It was taken back to the shop and eventually the problem was traced to a loose wire on a terminal connector. After a month of operation, it is again beginning to make the bumping noise while the platter turns. To top it off, Consumer Reports (the March issue) deals with problematic microwaves, especially the GE model and the unexpected fires that can occur. In addition, they can be susceptible to (not always however and only on certain models) wireless transmissions which could potentially cause them to start on their own. I know for a fact that it knocks off my XM Satellite Radio when it is running. Bottom line...its history and will be replaced with a check rated appliance before I too have a major problem.

Ever since I bought this dishwasher in Jan 2014 it hasnt dried properly. Finally had a tech come out and he told me the water wasnt hot enough. How is it energy efficient if I have to raise the heat in my water heater to get the dishes to dry???? Very dissatisfied! My old dishwasher (with plastic lining) dried the dishes with no problem. I had it for 16 years before I had any problems with it. This new one is a problem from the first time I used it. No GE ever again!

GE Dishwaser Model # GDT580SMF2ES - My husband and I purchased an entire suite of GE Slate appliances in 2015 when we built our custom home. We purchased the refrigerator, glass-top range, range hood microwave, and dishwasher. We have experienced problems with the refrigerator Model # GFE28HMHCES twice. A horrible rumbling sound, which they came out and repaired promptly. However, more upsetting is the constant problems we have experienced with the dishwasher. The door gasket broke, which we were informed was not covered under warranty, and most recently the dishwasher stop cleaning and will no longer dry. We have done everything to rectify or repair the situation ourselves, and since it is no longer under warranty, we are left with an appliance that we either spend more money on to repair or toss and buy a new one. NEVER AGAIN WILL WE BUY GE!

We had a new GE Monogram dishwasher installed September 2014, a little over a year. We had a hose leak and it cost us $229.00. I do not recommend this product.

About a year and a half ago, I bought a GE Profile dishwasher from a very reputable local dealer. Within 3 months, the digital control panel failed. Because it was still under warranty, the dealer replaced the panel. It failed again. This time they made other adjustments, it continued to fail. Finally GE suggested that the dealer replace the entire door panel, which they did. It took the repairman a couple of hours to do so. Still didnt work. Finally GE declared the machine non repairable and replaced it. Unfortunately the men who replaced the dishwasher didnt install quite correctly because it leaks. I keep a plastic container under the front left corner to collect the water every time the dishwasher runs.But the story doesnt end there. This machine and the first one both include a sensor that apparently check for objects that obstruct the spray arms. I dont know because theres nothing that tells me why the machine is beeping when I attempt to start it. I check the spray arms, move dishes, try to start it again and still get the beeper. I have done this over and over and over again and still it beeps. I have essentially emptied the dishwasher and it still beeps. When it does run, I have to use the boost temp. option and the longest cycle available to get dishes, and I mean dishes, even passably clean. Forget pots and pans, or casseroles. So, if you own a GE dishwasher, I hope that you have the old fashioned dishpan and dryer rack handy. Bottom line, it doesnt clean well, leaks, and beeps every single time I try to start it. Buy something else.

I bought a brand new GE Spacesaver OTR mount Microwave (Model # jnm1851dmbb) and had installed in my new home by the appliance shop where I purchased it in November, 2010. I am a widow and I use the microwave maybe 3-4 times per week, and take very good care of it. I went to steam some fresh veggies this evening and the whole unit just went dead. There’s no fan, light, or keypad. It is plugged in and I did not blow a fuse or switch. I checked them all. It’s just plain broken after less than 2 years of very light use. It’s a piece of junk! I’ll be buying another brand this time. I will never buy a GE again! It’s a junk, junk and junk!

I bought a GE stainless steel over the range microwave vented oven in may of 2012. At 24 months, it caught on fire while cooking a bag of popcorn. Fire shot out of the side of the microwave. I shut it off but it still shoots fire out if you try to use. The warranty on this unit is one year. It is unrepairable.

First of all we loved our GE microwave / convection oven for several years. We used both cooking methods with much satisfaction. Two months ago, the microwave started turning ON when we opened the door of the unit. I know this much be dangerous? Also, when using the convection oven, the microwave also operates, and ruins whatever I am baking. HELP!

I bought a microwave unit (HVM1540DP1BB) in August 2011. The warranty expired in 2012. But just a little over 1 and 1/2 months after the expiration, the unit would not power at all. The display did finally come on after a day with plug disconnected showing **, but if finally came to life. No more than a week later, the same thing happened. This time the unit does not come back to life, no reset. I had replaced in 2011 the original unit that the home builder had put in. That unit last eight years. GE makes terrible microwaves and I will not replace it this time with a GE.

I have purchased a GE microwave/convection oven 7 months ago. A month ago, the control panel broke down and it would not turn on. I called up customer service and a technician was sent after a week. They have diagnosed it and the motherboard needed to be replaced. The said part was ordered and I was told it would be delivered in 2-3 days and a service will be scheduled in a week. A week came and no parts showed up. I have called up customer advocate and they assured me the said part will be delivered in time for the service appointment.Unfortunately, when they came, the said parts have not been delivered and I was given the lame excuse of systems failure; the request has not gone through their system. So the technician assured me that he will put in an overnight request for the said parts and the oven could be fixed within the week. He even gave me his work and cell number for me to call if I have any inquiries. But he never picks up or even returns my calls. So another service appointment was scheduled and parts were delivered, only to find out that it was the wrong parts, supposedly for another customer and for a different microwave model.Its really frustrating when people keep on reassuring that they are going to get it done, but has done nothing but lip service. Its been over a month and my microwave is still a broken microwave. I have learned my lesson and will never again in my life time purchase a GE appliance. PS: I should have listened to the Home Depot guy that sold me this microwave.

Consistent with many reviews about poor customer service and saga to try to get an appliance fixed, we experienced a very situation with their microwave. Power is on but doesnt heat food. 5 visits later and multiple calls to GE became a string of technicians having to order a part, waiting at least a week to receive the part and technician trying to fix it. For 2 weeks the microwave worked and then stopped working. Called GE again, and again they insist on having technician come by to diagnose the same problem. We put our foot down and asked for a replacement and were denied because it wasnt deemed to be irreparable. I stayed online until they offered a discount on a new microwave and they then took more than a week to send that and also proceed to take the old one which not convinced they were entitled to take given we had to purchase a new one. Completely inefficient process, customer service agents who are in and unfortunate enough to follow an inefficient process that is not focused on the consumer. Really unfortunate for a top tier company whose mission is centered around the customer but fall down on execution. Really disappointing. Im glad that we live a in capitalist state that allows us to have other choices and not feel stuck with one brand. The cost of our time and stress and technicians hourly wage is disproportionately greater than the 300 dollar retail price tag for the machine.

I bought a GE dishwasher that has a plastic tub. The tub smells. I asked GE to replace it, they wont because they say it operates correctly. I cannot imagine why any manufacturer would use a product in a dishwasher that STINKS. The plastic even has a warning for California consumers, that its a cancer-causing substance. Im glad I dont live in California, so it will never cause cancer here....

I work as a service tech for a major insurance company. I am a master tech, and master electrician. The company that I work for owns an apartment complex which is used to house company executives whose offices are located at other sites, but often come to the Chattanooga Site to work short term. I was called to repair an old dishwasher in one of the apartments. Upon looking at the existing dishwasher, I decided to replace with a new one. I received a new GE model GDF 510 PGD 1WW dishwasher on November 8, 2013. As usual I unpackaged the appliance and examined the exterior. Finding no visible damage, and with the help of a master plumber, I removed the old dishwasher, and installed the new one. After all the connections were made, I opened the door, removed all the packaging from the dishwasher, and found the upper spray arm lying in disarray in the bottom of the machine. Assuming that this was the way that the machine was packaged, I installed the spray arm, plugged the machine up and started the machine as the operations manual instructed. The machine would not work. The power lamp would burn solid for a few seconds and start flashing. I tried to start the machine a number of times while reading the instructions, and while my partner read the instructions aloud, but with no results. Finally, I used a screwdriver to hold the door switch closed, pressed the start button and the unit started. The catch mounted on the door would not make the door switch, mounted on the machine body. We tried to adjust the switch and the catch, but with no success.The dishwasher did not show any signs of exterior shipping damage, but for some reason the upper spray arm was off and lying in the bottom of the unit, I found a small piece of broken plastic and a screw in the bottom of the machine, and the door switch would not make. Outside that I have no complaints. I am not sure where this machine was assembled, but it certainly was not equal to the machine that we removed. Thanks GE for making my job harder. I will have to find another dishwasher Monday and replace the damaged one, and perhaps send this one back, but the replacement will certainly be another brand.

Our GE microwave, manufactured in 2012, has been running fine, but the door handle has cracked on the bottom. Imagine my shock when I found the cheapest price for a PLASTIC handle was well over $100. How can this be?

I have a General Electric HVM1540DN1WW over the stove microwave that I have had. This month will be a year and a half. The oven stopped heating so being a DIY person, I pulled the oven out and took it to my workshop to see if it was something I could repair. Inside the front panel was a very helpful schematic of the whole oven. Using the troubleshooting step listed on the paper, I found that the Magnetron tube had gone out. So I went to my owners manual and found that the tube had a four-year warranty on it so I called General Electric consumer relations to have the part replaced. First I had to fight with them because they said it was only covered for a year. After about an hour and a half on the phone and giving her the publication number on the manual, she agreed that it was indeed covered for four years. So she said that she would replace the part and she would even send a technician out to install it at no charge. I was very happy at this point. She said that she would ship the part to me next day with UPS and the tech would be out the following day to replace it. So far so good, till the next day when the part did not arrive. I called back in to General Electric consumer relations and spoke with a man this time and he told me that she had canceled the order that is why I did not receive it, and he couldnt see why. So he looked at the comments she had made the day before and did see that she said she would replace it and send a tech. The tech was supposed to be here the next day and I had no part for him to install. The man said he would place the order and have it shipped to me by the next day no later than 10 a.m. and the tech would be here between 1 to 5 p.m. Great! Until the next day and again no part when they said it would be there. Again with the call only to find out that it was scheduled to arrive next day guaranteed by 7 p.m. The tech is supposed to be there with in the next few hours and I wouldnt have the part. I called Fed-Ex and sweet-talked the lady into getting a hold of her driver to see if she could get to me ASAP. Bingo, next thing you know I have the part, the tech calls and the part is replaced. Oh boy, the big gaping hole above my stove is finally going to be filled once again. (I promise I am coming to the end.) After reinstalling the oven, I found out that it was taking longer to heat than when I got it, and it has a brand new Magnetron in it.Again with the call to General Electric consumer relations to set up another tech to come out and check it out. So the following day, the same tech arrives and puts a cup of just barely cool water in it and puts it in for 30 seconds, pulls the water out and says it is working just like it is supposed to and leaves. Well, again I called General Electric consumer relations to let them know what has transpired, but this time I asked to speak with someone higher up the food chain. I then spoke to a lady and she said that she would set up another tech to come out and check it out, and if it resulted in the same way that she would replace the unit with a new one. The following day, the same tech calls me and said that the oven is working the best that it could so I should call back to consumer relations as he did and set it up for a new one to be sent in its place. So I called once again and was not able to speak with the same lady and the only thing she could do is send me a voucher for $250 laying around for a new oven, but I would have to purchase one and send the voucher in with the receipt to get a refund. I told her that I did not have a spare $250 dollars around to go buy a new oven and then wait for the refund to get to me. So I asked that she have the lady that said she would replace it to call me back to straighten this problem out. Finally the following week, the lady calls me back and said, This is the best that I can do, due to me voiding the warranty. I asked, What? She said that the tech that spoke with me said that because I had hard wired in the unit to the house wiring, it was receiving low voltage so she couldnt do any better than that. I told her that was the most asinine comment I have ever heard coming from a field tech and asked her whether he went to a school backyard Techs-r-Us. I asked if she would have the tech call me to explain. I also gave her some friendly advice that she should not use that comment to anyone else for fear of someone laughing at her. We agreed to have the voucher sent if that was the best she could do. I will not buy another GE appliance again! I have purposely not mentioned anyones name because it was the experience, not the person that I spoke with.

This updated version came with this house. I am very happy with my dishwasher, it is very quiet and is the top of the line. I love my refrigerator/freezer by the same company too.

Touchpad for CVM2072SM2SS stopped working. This touchpad has been creating issues for the last couple of years. Few reconnection of wires got it working for the last few times and now it is completely broke. GE is not ready to help with fixing the issue. It wants to sell me another microwave CVM1750SHSS which seems to have similar issues (also the plastic handle for those microwaves seems to fall apart due to heat). In fact, the reviews for the whole range of GE Cafe series seems to be pretty bad. GE is not owning up the design issues. Too bad!

I love the GE. I bought a GE dual fuel range about 3 years ago when my 6 yr old Frigidaire stove caught fire. Always wanted to cook with gas but have electric oven and broiler. It's also easy to clean the cooktop unlike older gas stoves. Love the big fast boiler eye.

We were super excited to get this GE Profile Cafe dishwasher. Minus the brand, it was the exact design/style as the one my dad has which we love! First issue, dont have a name of a dish liquid if you cant use all of them. Cascade apparently makes different detergent styles for the smart dispense. Dishes were ridiculously dirty and the horrible thing is I couldnt find an answer why on GEs site, I had to go to a handyman site. That was about a month and a half ago. Today, I did the dishes and, of course, let it do its thing. I always have the heated dry on by the way. Well, dinner came and I grabbed some dishes out which were screaming hot and I had to use an oven mitt. I didnt think anything of it because sometimes Im a sissy about that. Well, its now 3 hrs later and I get up to the smell of burning plastic. My first thought was that the sippy cup straw fell on the heating unit. I did not, however, expect to open it and see the Tupperware melting, the silverware rack melting and the water bar to be melting to the heating unit and it being so hot that I have to use an oven mitt just to touch the freaking rack. Oh! And by the way, we bought this off Craigslist last year and it was brand new. It still had the casing around it from the store.

The brand performs wonderful. We enjoying. Also, has great features for cost. We have done several items in it and all come out great. Have not had any issues at all. I would recommend this brand and model. I would purchase similar item again.

We purchased a Profile Dishwasher, Stove, Oven and Microwave. So far weve had problems with all products especially the dishwasher. The bottom of the dishwasher is filled with water, the door has water running down the front and all dishes have to be dried. I have talked to GE and I was told the new models do not have a drying system as in the past due to EPA. I feel like we have spent thousands of dollars for items that are trash. Had I known I would be drying dishes I would never bought GE products. I would trade this GE for a SEARS in a minute but too late. Ill keep calling GE office, maybe a miracle will occur. Ive tried all the tricks in the handbook... doesnt work.

Month Long Dish Washer Installation from Hell (Try #3 the best).Install Try 1 (I took off work for): Oops, I ordered the wrong hose. I am going to have to come back next week to install. I will call you and set something up. (installer). Next week Friday: Hello is this GE Installation services Umm its Friday and the guy never called or showed up this week to install my dishwasher I just purchased??!? (me). We then set up a time for the following week. How unprofessional.Install Try 2 (I took off work for): Umm still didnt bring the right hose. Can you go to Home Depot for me and buy the right one and bring it back? (installer). Ahh No!?! This is your problem not mine. (me). Well I will have to come back then. (installer). You have to be kidding me. I have to take another day off work?!? (me). Finally he gets a guy to come with the correct hose. Umm, can I borrow a screw driver and some tools from you?(installer). You have to be kidding me, sure? (me). Installer proceeds to drop the sides and fumble around banging the pieces on my NEW floor. Finally getting it installed. It doesnt look right. Dont the feet raise up and shouldnt the dishwasher be flush to the cabinets????!? and it looks crooked?? (me). Nope. (installer). I file a complaint and the guy removes my $60 install fee and sends another team out to fix it.Install Try 3 (I took off work for): 3 guys come and re-install dishwasher worse than the guy before them. From the other room you hear banging around and Oops, I broke a screw etc... This is what happens afterwards. Umm the plastic backing and sides are showing. Its pushed out farther than it was from the first guy. It definitely is NOT supposed to look like that. Plus its loose??? (me). Best we can do. Bye. (install team). This doesnt seem right....(me). Oh no, its leaking!!!!!!!!!!!! (me). So I called a plumber to come ASAP as I said before its NEW wood floor. New Plumber NOT associated with GE or Home Depot (who I probably will be getting a nice bill for calling last minute) proceeds to fix my dishwasher for the next 4 hours...Here is a small list of problems: 1) its leaking; 2) the foot vibrated off; 3) screws broke off; 4) damage to hose; 5) bottom plate installed at angle not even remotely level; 6) scratched up floor and cabinets; 7) installed too far forward and too low. This is the list. So far we still are trying to figure out where it is leaking from and if the dishwasher even will work. Thank god I actually got a Professional this time unlike GE/Home Depots teams. I then called GE Install services 1-800-432-7167 again and this is what they had to say: We already refunded you the 60 dollars. There is nothing we can do but we will file your complaint. I called again to speak with a manager and after a long conversation, he gave me $62 off my order. -- And let me tell you that is not going to cover the cost of the plumber I just hired to fix your mess. Not to mention the 3 days off work I took. Irritated I hung up. I bought a fridge, cook top, and double oven with GE along with this dishwasher. I wish I hadnt given them my business. Apparently, I am supposed to call back if the dishwasher doesnt work when my plumber is done working on it. Oh I WILL be calling back, you can bet on it. As for now I just hope he finds the leak... Moral of the story is NEVER use the install services they offer. You are better off getting your own plumber from the start.

I also bought a stove as well as the dishwasher. We Told them with great concern to put a extra warranty on the more expensive item, which was the dish washer... more could go wrong. We all agreed, including sales person. Day before the first year, the dish washer was not draining good. They said the warranty was running out. I told them, I had got extra yr warranty. The robot voice said it might be over. The repairman came in, and said the same thing. The repairman replaced everything in the dishwasher. It took him 3 visits. He got it working. He claimed there was an extra orange ball in the part and that why it didnt drain well.I started using it for 2 weeks and it stop draining completely. When I bought it the salesperson said, See I added the extra warranty on. But unbeknownst to me, she put it on the stove... How the heck am I supposed to know she did it wrong. I call the company and they said, Look at your receipt. And sure enough, it was on the stove. Looking at it and how the salesperson made it sound, it was understood by all that the warranty was on and I had an extra yr on the dishwasher... I looked at the receipt. Had a list of what I bought the warranty and we were good to go. Everything was replaced in it, everything. It was a mechanical issue and yet here it sits not working and I havent even paid for it. I am disabled and was give a lemon. I would never recommend a GE anything. This was a first... I usually buy Whirlpool and never ever had a problem... Theyre selling lemons and they know it.

Ive had this dishwasher for about 3 1/2 years now, and never have I been so dissatisfied with a product. I gave a review then, was contacted by a GE rep, followed their guidelines, even had a GE rep come out and review the problems. We changed our hot water temp, when we did dishes (not during clothes washing), checked to make sure the blades are not hindered, changed soap to Finish Gel (works best), added rinse aid. There is just not enough water to rinse off the dishes. Period. I do not add more heat/dry, and use Sanitize and Steam 99% of the time.What happens is the food sticks to the dishes and melds into them, causing permanent discoloration. This is no pot scrubber. It does no scrubbing! I have to wash my pots every time after I clean them in the dishwasher even if I pre-scrub them clean before washing! Sometimes the food from other dishes or the soap dumps onto the clean pot and makes it dirty! There should be a lawsuit against this company for this product. Its horrible! BUYER BEWARE! This rating should really be a 0 (zero)! Sorry I am not submitting proof of purchase from that time. We remodeled our kitchen in 2012.

The dishwasher malfunctioned and flooded our home. The dishwasher continued to run even with the door open and the display showing “leak detected”. We had started it before we left the house and it had been running for about 20 minutes when we left. When we came home hours later, hot water was still being produced by the dishwasher and had flooded our kitchen and basement. We could not stop the dishwasher with buttons at that point and had turn off electrical and water supply to it. The absolute worst part is they will not replace or refund it even though it’s less than six months old. They are only offering to service it and expect me to continue using it.

I know this commonplace complaint, like thousands before me, will head straight into the wind because the world just works in this way: technical support and repairs works as a profit center for a corporation. My GE Profile microwave abruptly failed out of warranty after years of use. The cause was due to a wire burning up inside that had not been loosely connected, said the GE technician, so this was an issue of inadequate quality--not bad enough to cause the microwave to fail quickly but enough to cause failure over time.After taking the microwave out of the built-in cabinet, it only took the technician about 5-8 seconds to find and diagnose the problem, several minutes to get the right part (a wire) from the truck, and a couple of minutes to fix it. The labor charge was $121 for about 7 minutes of repair work, to be liberal with time. (This charge is separate from the charge to come to our home and diagnose the problem.) This prorates to over $1,000/hour for a basic wiring change, which I think is exorbitant. I understand that the technician is a highly trained individual, but this is already reflected in the high labor rate.According to GE, the cost to replace the built-in microwave, which came with a matching stainless steel frame would be $550 if we wanted the new microwave to match the frame at least (but not necessarily the oven, stove, etc.). This is the kind of cost you dont think about when you buy a new home built with matching appliances--well, I didnt. Companies like GE can rationalize all they want about all the overhead associated with servicing a repair call. I can certainly grant them some leeway, but in the end, charging an extra 8 times more an already high labor rate given the time needed to fix the problem is simply price gouging a consumer who has no good recourse. (This is why I pretty much avoid repairing anything, except for my car. Its almost never worth it.)I recently had an experience with an experienced plumber charging an hourly rate of $150, prorated by and rounded up to half-hour increments of work, regardless of difficulty of work. Repairing an appliance should work the same way, and my GE bill would have been halved. Because of such profiteering, I will not consider purchasing a GE appliance in the future. I pray that this microwave doesnt break down again in the coming years due to some other problem. It would be a lot less expensive to just buy a non-matching portable microwave then for $100-$150 than to keep up appearances.To be fair, the woman who fielded my service call was courteous and empathetic. Because the microwave apparently had an electrical burning problem, she previously waived the diagnosis fee. Otherwise, my simple repair would have run several hundred dollars, more than the cost of the microwave. However, she was unwilling to reduce the labor charge, so based on how strongly I felt ripped off, I give GE a star rating overall.

Fourteen months after buying my new built-in GE Profile Microwave/Convection, it stopped heating. I was told by GE that it was not under warranty. I paid close to $300 to an appliance service operation locally to fix my nearly $1,000.00 GE built-in (depending on the microwave to help feed four kids under the age of nine). So, about 13 months later I had another heating issue and I called the appliance service operation and they found another problem with the microwave. They said it was a faulty piece of equipment, replaced it and didnt charge me since they were local and said this shouldnt have happened (knew I was recently divorced and took pity on me). Almost 18 months after this, so three years after the purchase, the microwave started to act up again - it continues to work even after you open the microwave. Just dealt with it since it still worked. However, 6 months later, the microwave now doesnt heat. The power is on, and nothing happens inside. This started a week ago, but it was off and on. Now its dead. Never buying a GE anything. Ive got to buy a microwave and a refrigerator in the next six months. It is NOT going to be a GE!

We recently purchased a new GE microwave and are pleased with its service and price. The microwave is attractive and seems to be constructed well! We would buy another GE product and feel that they provide quality in appliances!

GE Cafe Series dishwasher model # CDW9380N20SS is a fire hazard. Three days ago, our GE Cafe Series dishwasher nearly caused a fire. If I had not been home that day, it surely would have. I ran the dishwasher as usual and went about my day several hours later. I detected a strange acrid smell and with my five-year-old who was ill and at home that day, discovered the dishwasher door was burning hot to the touch. I needed a potholder to open the door. Once opened, there was a blast of heat and smoke. I needed to use oven mitts to protect my hands from the heat to pull the racks out and handle the dishes. The heating element did not deactivate at the end of the cycle.If I had not been at home, the house would have been destroyed as all the plastic items on the top rack in the dishwasher melted. In addition the plastic parts of the lower rack, the wheels and their clips; the silverware holder; covers; the clips that hold the pot tins in place were destroyed, to the point that the majority of our silverware was coated with plastic. The plastic on the lower water dispenser has been demolished; it completely melted more than 50% of the plastic covering on the arm and is charred and burned. We are so lucky to still have a home!The door must be kept open. When the door is closed, the element super heats and presents a major fire hazard. We have noticed that there is a recall for similar models with plastic tubs, but ours has a stainless tub. GE needs to broaden the recall to include all these models. This is a serious issue that needs to be addressed immediately. Our GE Cafe Series dishwasher model #CDW9380N20SS was installed on October 1, 2008. I would not be surprised to find that parts from the recall in April 2008 were also used in the Cafe Series. I have discovered in the few days since the DW units malfunction that there are over 1000 complaints listed with similar, even identical complaints, on multiple internet sites with the same problems.

Called out GE service tech to diagnose my dishwasher which was not draining after the wash cycle ended. Was told it was the control board and it would be best to buy a new dishwasher. Purchased a control board online (was a GE original part for a lot less than the GE price) but it did not solve the problem. After researching the problem online, I found out that it could be the drain valve. Sure enough, bought one for $14, installed it myself and the dishwasher works like new. Called GE Service to try and get a refund for the service visit ($89), was told that I had 30 days to have the tech come back out at no charge. Tech never advised me of this policy and GE will not refund my money.

GE Stainless Steel Profile Dishwasher - My dishwasher is about 5 years old. Two years ago, we noticed that the gaskets, both around the tub and on the bottom of the door, were becoming gummy and rippling. We were hoping to make it another couple of years before buying a new dishwasher, but a couple of week ago, the top arm fell off because the gasket was so degraded. We ordered the appropriate parts and were only able to replace the top-arm gasket and the tub gasket. We had to call an authorized GE repairman, specifically RC Appliance in Sparks, NV. When he tried to get the gasket out, his hands turned black from the rubber. After about an hour of trying to get the new gasket installed, he had to use his pliers to crimp the gasket in place leaving large dents along the bottom edge of the door. He said the factory had crimped the old gasket in place at the factory from the other side. I am extremely unhappy about the workmanship and the fact that the gaskets did not last a reasonable time. I dont want to seek an attorney, but would rather GE contact me to discuss what must be done.

Now out of warranty, my 4-year-old microwave (sadly, the top oven of a double wall oven), has been flaking and peeling paint. It is totally unsafe and unusable.

Purchased a black stainless steel microwave model JVM7195BLTS. When we opened the box we realized the handle finish was stainless steel and not black stainless steel as the rest of the unit. The website picture clearly shows a matching black stainless steel finish on the handle. Store was unaware of any problems and reordered another one. They claimed the GE rep said they had a problem with the handles on these units but didnt tell the retailers.

I have to agree with other post about the customer service. Our dishwasher is only 15 months old. First call went fine after that everything is with email. Tried calling several times to get correct parts shipped after only getting one of three needed, I called and finally after 45 minutes an agent answered. After several attempts to get recommended parts and repairs we are now having additional issues. The quality of the GE brand has really gone down compared to our older products that lasted 15+ years. Now waiting for a new assessment of what the issue might be and hopefully will be able to get the parts without issue.

I just remodeled my kitchen back in May of 2012. My wife and I started looking for the appliances and we decided to get the GE Cafe series set (dishwasher, cooktop, electric oven and microwave). Our microwave oven, model CVM1790SS1SS, developed a humming noise as soon as you closed the door. It does sound like the magnetron is on. To verify that, I filled a cup with cold water and I put it inside and closed the door without setting any cooking time. After three minutes, the water was too hot to touch. I called GE and told them that it was a fire hazard.They sent one of their technicians and he determined that it was not a fire hazard and if I wanted it fixed, I have to pay for it. How could he say its not? If I close the door, the oven is going to continue heating up until it burns itself and everything else around it. I am pissed at GE because this unit is barely one year old and expensive. This is a safety hazard and GE failed to acknowledge. Bottom line, Ill never buy GE again and will not recommend it to anyone.

My husband and I enjoyed our 1980s White GE Microwave and Stove/oven. But, after 15-20 years with the same appliances, we finally saved up for upgrades and purchased a new Stainless Steel (mid-range priced) GE Microwave and stove/Oven. I cannot begin to describe our disappointment. The Microwave is above our Stove/oven. Our old microwave had two powerful lights underneath it - one on each side. This microwave provides one small, weak light that does no good any time of day. Why would GE go from two great lights to one middle useless one? Also, the faint white numbers on the front keypad of the microwave are barely visible during the day - forget about seeing this when the light is not perfect. I foolishly assumed these numbers would be backlit on a black background. Onto the Stove/oven. The temperature is not accurate but that is something we can deal with. After the oven is pre-heated, the assigned temperature stays on the display pad - NOT the actual time. Who cares about the temperature you set the oven to - dont we all need to know when to check or take out our food? Our last oven always showed the time. We did not join the Stainless Steel bandwagon 10-15 years ago when others did - which we thought would be good for GE to get some kinks out. I Guess we should have waited 10 more. Proper lighting on your Microwave and The time on your stove/oven while cooking are not too much to ask for when we just dropped at least 2-thousand dollars!!!!!

I purchase GE Profile appliances for my new home. I thought I had done my research but until I actually owned I found I feel differently. The microwave pad scratches very easy and after only a few months you can see which buttons I use the most. I’ve only used a microfibers cloth to clean and it scratched the surface. Appliance repairman said to use terry towel. Wish I’d known that. Secondly, after owning all Samsung appliances previously I now appreciate what I had. So many of the features of my past microwave are not on this GE. For example the vegetable good, built in sensory knew when vegetables were cooked. Also, soften butter and chocolate was another feature. Thaw meat knew when it was thawed. So my advise go for the Samsung microwave

RCA RMW953-White 0.9 cu. feet Microwave, 900-watts, 10-power levels, end cooking signal, glass turntable, 6-one-touch cooking menus, speed and weight defrost, cook by weight. Bubbles obscure text. I wanted a white microwave with a door handle, .9 and fairly powerful. I was glad to have found this microwave. But I dont know if the hole was there before, or my teenagers or I inadvertently put a small hole in the plastic covering over the control panel outside the microwave (NOT meant to be removed, I asked support) but now its become a larger hole as air got underneath. I cannot read the button text. I tried to cover it with scotch tape and thats not working.I searched and found out this is a common problem with GE microwaves. The buttons are very close to the bottom and therefore, countertop, so if you have a utensil or plate or something that sits near the microwave, it might nick the plastic coating. I called GE support (in India) and they said since its under warranty, I can return it. However Id have to pay shipping costs. Fortunately, I bought this at Wal-Mart (I hate to support this store but it was the only place I could find this style) and they have an excellent return policy and there is no charge for shipping. It was easy to call and request a shipping label within the generous warranty period. You might save yourself the trouble of a return or be very careful to not put a small hole in the plastic coating. Again, this is not protective coating for shipping, this is a permanent coating to protect the buttons.

GE Dishwasher model #GDF610PSJ5SS stopped working (would not even turn on) a little over 3 months. Because it was purchased over a year ago for a spec home we purchased, GE would not honor the warranty even though we had only purchased the home 3 months prior. Repair, if possible, most likely would be more than buying a new one. Recommend avoiding GE products. This is our 5th home, never had problem with other brands in previous homes!

GE profile microwave TOUCH SCREEN pvm2070sm4ss - Almost new. Used properly. Touch screen failure. TOUCH SCREEN does not function properly making it almost impossible to use the microwave. This Common Problem should be a RECALL.........

I just had a GE tech out to my house to look at a GE profile dishwasher that almost burned down last week. There was not a cover over the internal electronic control panel inside the dishwasher and that was causing the circuit board to short out. The dishwasher is only 2 1/2 years old. GE wants to charge us $200 for the repairs. But this should be something covered under warranty. Their solution is for us to pay half. I think we will go and begin to look for a new dishwasher and never purchase another GE appliance. If you are in the process of building a house and equipping your home with new appliances, I highly recommend you look for another line and another brand of appliances. I guess I need to check with an attorney to see if there are any open cases against GE for faulty electronic components in their appliances.

This dishwasher was in the home we bought and its just not a good one at all. We dont like the settings.. We dont like the size. Weve seen better settings on other dishwashers when shopping around and pricing for a better one.

I purchased a GE dishwasher model GSD2100v50BB on June 6, 2016. By March 9, 2017, a switch broke which caused the machine to be stuck in the wash cycle for over an hour before it was discovered. This caused soapy water to flow out of the machine all over the floor. It was fixed under warranty but by June 29, 2017 it broke again. It is no longer under warranty and it will cost $70 to 100 to fix it again. It was purchased at Home Depot and they state it is to be handled by GE. GE states that since a year has elapsed, they are not responsible for the repair.

It works really well and this price point is good. It’s lasted me a few years and it is still in new condition. It has a nice modern look also. Good microwave for a great value.

I purchased this dishwasher (GE Dishwasher Model # PDWT180RSS) at the beginning of March and it has been nothing but a disappointment and inconvenience. Nothing gets clean. It has been serviced 5 times and I have a case # with GE. They have serviced the jets, used 3 different kinds of dish soap, checked the water pressure, temperature, and drain and still it does not work right! What a hunk of junk. Dont buy GE products.

My dishwasher came with the home when we purchased it, and we did not see any good reason to replace it. It is a standard model, with a nice stainless steel interior. We have had no problems with it and plan to use it until it fails. I would like to have the upgrade model in a new home. This one does a good job washing the dishes.

We bought Cafe series appliances less than 4 years ago including dishwasher, fridge, stove and microwave. These are not cheap appliances. We also bought a service contract with them. When our dishwasher broke a couple of weeks before Thanksgiving, we called service to have it looked at. After 3 trips and over a month later the dishwasher is still not fixed. Each time we tried to make an appointment we were always given a date 1 week out and a 4 hour time window, but each time the technicians showed up late and once even 3 hours late despite the 4 hour window. The fact that after so many visits and part replacement the dishwasher is still broken says a lot about the quality of the product and its maintainability. All customer representatives work like zombies. The problem with GE lies within the culture. Nobody cares. The service contract is a total waste money.

I have a new house (2 years old so out of warranty) and the kitchen has GE appliances that I choose. I hate, hate, hate them all! I have had problems from the first week in our home with the stove, microwave, refrigerator and dishwasher. I am so sorry I choose this brand! Today my dishwasher (for the 3rd time) isnt working. GE wanted to send their tech in a week. Then another week to get a part. I am so frustrated that I said forget it and called a local repair company. This is Friday, they will be here on Monday. I spent 2 hours on the dishwasher today. They had to replace my refrigerator and cooktop. My microwave went out 5 days after we moved in. Took 2 weeks to get it fixed. DO NOT BUY GE!

We have a GE Profile Microwave (PNM1871SM3SS) that is only 3 years old and is reporting KEYPAD SHORTED - SERVICE MAY BE REQUIRED. We called GE service repair and told them the exact message. The service guy shows up and says all he has in his order is General other service needed and that he doesnt have the keypad panel. Gives us an estimate of $501 to repair it. Tells us a new one costs $400 and with a coupon he can give us it will be $100 less. We were charged $99 for this visit which basically lasted 10 minutes (way to go GE on making money off faulty devices you sell). The service-person also told us that the average life was 10 years for these, but this one crapped out in 3. He said if we get another GE microwave, it will fit right in there and that I can do it myself if I am handy but after reading all the reviews online, I am skeptical whether I should get a GE microwave again or not!

The GE microwave model CJES1290Ml01 does not get used much, maybe 15 minutes per week. I have not even used convection oven or broiler part, so we could say very gently used. Sparks and grinding noise out of the magnetron tube area started recently and there is no metal in the microwave. It arcs like there is metal. There are not enough miles on this equipment to need replacement, but it is too expensive to fix. Im not happy with Walmart GE product. Did they cheap it up?

My 3 year old $600 GE micro caught on fire with nothing it. I set the timer on my top of the line GE microwave for a reminder. Nothing in the micro, cooking nothing! When I came back it was on fire! Melted the inside. If I would not of been there it would of burnt my house down! The only way to shut it off and put out the fire was to turn off the power to it. The next day as soon as I turned the power on my GE microwave started on fire again!!! This must be happing to many people and needs to be addressed by GE! This company needs to be held accountable for burning houses down!

Our GE microwave stopped working after about 7 months of use. Ive never had a microwave break down on me before. Ive owned other brands which Ive used for years, actually lasted over 10 years. The only reason we purchased the GE microwave was because our old microwave was too big in size. I called GE for warranty service and it was very much of a hassle just to make the appointment. I had to call several times because a customer service representative misinformed me. It took a couple days just to set up a service appointment.Ive told the representative that the microwave stopped working and will not power back on again. The representative told me that the fuse probably went out. Something must have blown out. Finally, the appointment was made for about a week later, which was the earliest time available. It is so inconvenient not to have a working microwave even just for a day. Anyhow, the service tech came about two hours late. The scheduled time was for 8am-12 pm. He showed up close to 2pm. A family member was waiting at home all day because of this. Then the service tech told us that he needs to order a part for the microwave and that he will return a week later to repair the microwave.A week later, he didnt show up. No one even called. So I called back GE and found out that the appointment has been postponed! So now, we have been without a microwave for about three weeks. I think this is ridiculous. Im pretty sure that this is a common problem with GE microwaves and they already had an idea why the microwave wasnt working. It doesnt power-up! Now they are telling me that they dont have the part/s in stock? If I had known that we had to invest so much time and go through so much hassle from the get-go, I would have just purchased a new microwave three weeks ago. GE should pay me for all the time Ive wasted!

I am very pleased with its functionality, its power and its appearance. I got it on sale so the price was good as well. I have had GE microwaves in the past and found them to be reliable appliances. I will most likely purchase another when the time comes to replace this one.

My Quiet Power 3 model GLD4450N10CS didnt clean well from installation (July 2008). But I ran the heavy wash as the norm. And I never used heated dry in case I had to rewash any of the contents. I ran my dishwash last evening. I went out to dinner and returned to a burning smell in my house. I opened my dishwasher and smoke came out. The plastics were melted. The cabinet next to my dishwash smelt of burning as well. The detergent table sat partially dissolved on the bottom of the washer. It took 2 hours to cool down. My dishwasher no longer goes into a wash cycle (even after unplugging it overnight). I have left it unplugged as I feel it is no longer safe. GE says it is $80 for service plus parts. And they said that if I dont repair it, I get $100 certificate to use online to order another GE. Its not worth it and I am very upset. I replaced all my appliance in 2008 with GE. My dryer had to be repaired. My washer was a lemon and they swapped it out for a new model. And now my dishwasher died and almost burned my house down.

I have had it with GE! Only 18 months after install, my beautiful, stainless, three-rack, GE, top-dollar dishwasher will not turn on. Repair attempts have been futile. Tech said not to expect more than seven years service out of new appliances. Were tossing this junk and buying CHEAP replacements going forward since all we have to choose from is throw away products. OEMs like GE should realize they are shooting themselves in the foot with their planned obsolescence business plan.

I pushed the oven cleaning button. After about 2 hrs I noticed smoke coming from the stove and the island where it is installed. The door would not open and the oven just got hotter and hotter and smoke was filling my house. I called 911 and they sent the fire department. After disarming the breaker, they removed the stove. I purchased the stove in 1996 but only used the auto oven cleaner a few times. The model # is jsp40 and serial # TR244121R. If I had not been home my house would have burned. GE you should do something about this situation. I have no receipt or order #. I purchased it too long ago.

One of the most disgusting situations I have ever been in. I purchased a brand new home with all new GE appliances. I have since learned that a technician was sent out twice prior to our walk-through because the superintendent noticed the dishwasher wasnt working properly. I registered all my appliances online. The first time I used the dishwasher, it flooded the kitchen floor, causing the builder to have to repair baseboard and drywall. A technician came out and repaired it. I used it an additional two times and each time I did, it flooded my kitchen and a repairman came out. After the second time, I contacted GE customer care to open a case. The third time, I requested a new dishwasher and the customer care agent, Stephanie, stated that my new dishwasher was a discontinued model and so she suggested one that was a slight upgrade. I agreed to this change and she informed it would take approximately 24 hours to have it approved. I have since talked to seven different people at GE customer care. This was started when a company called Barlows Distributing showed up unannounced at my front door approximately hours after my discussion with GE. They said they were here to install my dishwasher. I was rather shocked, said the timing was impressive, and let them in the door. After they had drained the water standing in the then current dishwasher, they started to put in a replacement. I looked at the box and realized they were placing the same model in. I told them that was unacceptable, because according to GE, I was being approved for a different dishwasher. I then told the tech to stop installing it and called GE. GE had no idea where this dishwasher had come from. Then an unavailable number showed up on my cell phone and when I answered it, the woman spoke my first name and started talking about my dishwasher, stating the builder had ordered a new one. I asked her who she was twice and she would only tell me GE customer care and not her name. I have since learned her name was Julianna. She said that I had to take this dishwasher or I wouldnt have one at all. I took this as a threat. After spending countless hours on the phone with GE opening a case and discussing the issues, picking out an acceptable replacement, I was then told the builder made this decision. Not only was I thrown from person to person over a discontinued model, I was threatened, and further was told by the superintendent of construction that once the dishwasher was installed and we closed on the house, I had to handle all problems through GE. I own the dishwasher, not the builder. I registered the warranty, and I handled it through the proper channels. I feel I need an explicit apology from GE. One of their arms doesnt know what the other arm is doing. During this entire time, I had little use of my right hand and seven fractured vertebrae (for which I am permanently disabled) and had to physically wash 10 boxes of dishes that had been packed up due to our move and stand while doing it. GE has caused me property damage, stress, and severe physical pain, yet threatens me and yanks me from person to person.This is my house, my dishwasher, and this matter should have been handled directly with me, instead of inviting someone into my house that I had no connection to or knowledge of. The really sad thing is that I just purchased and had installed a $6500 water softener and reverse osmosis system for the whole house, manufactured by guess who...GE.

Last fall, we updated our kitchen counters to quartz, and the Jenn-Air to a GE induction cooktop. While it is indeed pricey, the joy of cooking is not overstated here. The quick heat up, the ease of controlling the heat more precisely, and the easy clean up makes this unit well worth it. I love it!

I have owned my dishwasher for 5 years. Monthly, I use dishwasher magic to clean the inside, removing lime, minerals, rust and grease. The lower rack, under the silverware rack is completely rusted. I have used and owned dishwashers for over 35 years and not once has one rusted like this. Poor quality for the racks! I feel it should be replaced free of charge.

Had to order filter separately. No one said anything about filter not included. So it holds up the whole installation process. So now we wait! Not Best Buys fault unless it is supposed to be mentioned. Last microwave we bought, filter was included, twelve years ago.

A recall on a dishwasher: The heating element was replaced due to the fact they said it could catch fire. The bottom of the dishwasher is plastic. They replaced the heating element with the same kind of element that was there. How could that be any safer if the bottom is still plastic? I have children in the house; I feel this is a dangerous situation. I am dissatisfied with GE. This is the third dishwasher with the same problem in a matter of 5 years.

I bought GE Profile dishwasher (PDT750SSFSS) from Home Depot on Sept 2014. First week it had some drying issue and GE service technician told no issue with dishwasher. After 4 months, electronic control board stopped working and GE service technician replaced the board. It worked for about a month and again same control electronic board failed and need to be replaced by GE technician. Again within a week again board failed for 3rd time. This time I asked for a replacement from GE since same board failed 3 times but GE refused to replace and told they can only repair and cannot give a replacement of dishwasher. Again for 4th time same control board failed now and I have contacted Home Depot for help. I dont know what to do this time and I dont want to repair this dishwasher anymore. It is only June 2015 and it had been repaired for more than 4 times. Ill try through Home Depot to get a replacement, if not Im planning to go through consumer court and file case against GE Profile. I would appreciate if somebody can help in resolving this issue and you can contact me through my email.

We have a GE Advantium Microwave. It is our second model (we moved and left the first one behind). It is spacious, has an intuitive menu system, cooks extremely well, also includes a convection oven feature that we use to great advantage. The nicest microwave weve ever used (and weve used plenty of them).

Within a year and a half of buying a new construction condo, the GE microwave fan stopped working (used the condo for no more than 30 days). I read all these complaints and am not surprised. My experience with Kitchen Aid appliances (refrigerator, microwave all junk) is no different than this. If I were to replace any of my appliances, I will not buy an American brand because they are all made in some other country with very poor quality control for very high profit and low quality goals. No choice for now, other than to get it repaired. At least, it provides employment, but what a way to create employment. I would never work for such companies.

Our microwave caught fire today and burned our kitchen, stove top, & attic. According to the Fire Captain, the cause of the fire was the GE microwave panel shorting out. Had my mom not been standing right there as it happened, our entire house would have surely been a loss.

We have a five-year old GE Profile Microwave that has an LCD panel. It is a nice feature, but it has become unresponsive to touch and now will cost us $500 to replace the LCD panel. We will just buy a KitchenAid instead. The LCD panel is not sealed, so when you cook, even using the exhaust fan, the moisture gets up in there and damages the panel. This is such a terrible design. We paid $600 for this microwave thinking it is a good quality appliance. Never buy GE! I was in Best Buy yesterday and told people who were there looking at microwaves. Terrible quality! We have to purchase a whole new microwave hood range now.

I have a GE dishwasher that shut itself off after three uses. It was rebooted by a repairman, and worked once. GE repairman called to let me know and I was originally scheduled for today but have been canceled. I’m taking the day off but for nothing. There’s no number to call. There’s no one to complain to. JCPenney is not standing by their merchandise because I did not buy an extended warranty. Originally purchased in November 2017. The machine was replaced by GE in December 2017. I have a dishwasher that I paid over $500 for and I’ve used it four times.

It is about six years old, great dishwasher. The bad part is the new detergent! GE profile, pre-rinse, preheat water, everything, including enough water. Hold everything, unfortunately, now aluminum must be hand washed. Good looking, curved front. Its great, I shudder to think what the new low water usage ones will be like. I HATE my new low water usage washing machine. I HATE the reformulated dishwasher detergent, can be used on anything aluminum, now I use lots more water hand washing all aluminum items!!!

I guess my GE Profile dishwasher is a lemon. Sounds like it from all the other reviews. Same deal - purchased it in July of 2016 and by October 2016 it went out. Technician that was sent told me it was the electric and I needed to have an electrician fix the fuse. Electrician came out and said it had electric, that it was the dishwasher that failed. Next technician fixed it and said the electronic panels get confused. Three days off of work. December, 2016 the dishwasher failed again. Had no dishwasher throughout the holidays. They scheduled service technician and then cancelled because the one technician they had was out sick.Today, January 9th, they called to let us know they were on the way, but never called the number they were supposed to, so now we are totally taken off the schedule. Ive been on hold and disconnected three times and now have been on hold for one hour and 6 minutes. DONT BUY GE APPLIANCES - Terrible service and crappy appliances that dont work. This is really sickening since I have ALWAYS used GE appliances.

I bought a microwave Model JVM316RF3SS on 6/12/16 from Best Buy. Here is the serial number GG242212A. This thing is tripping the circuit breaker, it is intermittent. I had been buying GE for the house because the stuff would last or they would stand behind their products. Looks like times have changed, I called yesterday to the customer service and the only thing I was offered was a song and dance. If you are to consider buying a GE product, think about it again. This microwave is only a year and a half, to have a tech service guy come out and look at it, it is was priced out at $97-108 for a visit and then parts and time will be added in additional to this visit price.They have priced this repair out to be cheaper to just replace it. My washer is making excessive pump motor bearing noise during the high spin cycle, this is two years old. Looks like GE is building crap. My background is a mechanical technician for over thirty years, building products that are to be used in the household should be built to last not become a disposable item like a cigarette lighter. Good job GE for joining the other substandard products being built. Must be outsourcing this to a foreign country like everything else. With the model and serial number GE you can call me if you have ANY questions.

Model #JVM1790SK01. High end GE Profile microwave/convection oven. Purchased and installed in 2009. First off the exhaust fan is terrible and is very noisy. The product itself worked well until recently when now the microwave heats intermittently, one time it will come on and heat, next time nothing. The fan runs, but no heating. The truly frustrating part is I need the front venting and no other units have the vents that blow the air outward, all the new units blow the air straight up your cabinets. Certainly a high end unit should last longer than 5 years with only two adults using it now and then. The cost of the service is outrageous and I surely would not use the $100 rebate on another GE product if they do not last any better than this one.

It popped and acted as if something that should not be microwave several times, although the contents were fine. Finally it caught on fire. I had it for a year and used it mainly to warm up my coffee. Never popped popcorn or used in meal. I will not buy GE again. I work too hard for my money.

We normally purchase LG appliances but this time we purchased a GE Profile induction range and GE Profile above range microwave oven. The relay went out on the microwave oven about six months after we got them. Their website for scheduling service is absolutely horrible and didn’t work multiple times and when I was finally able to schedule, it was two weeks out. I then called but was told I couldn’t get an earlier appointment. So we waited the two weeks, then they had to order the relay. GE waited until the part was delivered to us to schedule the return visit - over 2 1/2 weeks later! So at this point we are without our new microwave for over a month and a half. Moral of the story is never ever to tempted to buy from GE, LG appliances & cust service are great.

I bought GE Profile appliances 5 years ago. The dishwasher motor needs a new one. It cost me $300.00 to fix and I ended up buying a new dishwasher, of course, no more GE. Six months ago, my GE profile fridge is not making ice. It cost me $300.00 to fix. Now, the freezer is not working right. I was told another $300+ to fix. I went out and bought a new fridge. Back to basic, Kenmore brand. GE profile is not inexpensive and only last 5 years, starting to break down. Please stay away from this company.

I have a over the stove microwave. I went to pull out the filter to clean, and one came out no problem. The second one fell apart. I got online today to replace $38 plus $6 S&H for one!!! It was the first time I took it out. I called GE told them I thought it was B.S. They said, No problem, we will give you 15% off and free shipping. Only problem was they wanted $47. I have 3 GE appliances. When its time to replace I will NOT be buying GE.

We purchased a GE dishwasher model GDF 510 in December 2012. We have had three service calls with a fourth one recommended. The first complaint was that dishes were not dry at the end of the cycle. After service calls to replace a faulty heater and install two computer upgrades, the silverware still is not dry. Finally after about 45 minutes into the cycle, it leaks onto the floor. GEs answer is to send another service technician. No thank you! They can have their dishwasher back.

Have to rinse dishes clean before I put them in. Otherwise they will not get clean. Does as well as most other dishwashers- until you get into the very upper end ones. The racks are good size. The outside is nice looking.

I have had a few cheap microwaves but at this point in my life I wanted to buy a good quality microwave that would last. Well I bought a 200 dollar GE microwave in February. 3 months later it went out on me. I did hard and soft reset numerous times with no success. They offered me a discounted check to replace it and it would take 4-6s weeks to receive. Instead we returned to place of purchase and they gave us a floor model to replace it. All was well for 2 months when lo and behold this one started doing the same thing. No amount of resetting would make it run. It went out cooking corn on the cob. Why is this so hard to keep running? Their response this time was a goodwill rebate certificate to purchase only a GE microwave. Why in heavens name would I want another one? It only lasts a couple of months and who is to say the 3rd replacement will not be the same.

I purchased my GE profile microwave in 2010 when my kitchen was being redone. I picked it for its style and the GE reputation. So far after 9 years, I hope this wont jinx me, it has been a wise choice. I use it daily.

My GE Profile Dishwasher was serviced 2 years ago for a faulty electronic control pad. It made starting the dishwasher a complete gamble, you never knew when it would actually turn on. I paid a couple hundred dollars to fix this problem 2 years ago and of course it has stopped working once again. So frustrating! GE decides to replace one bad part for another bad part. I then asked for the service call to be covered since it was obviously the same problem but they refused. So, GE am I to keep paying $89 for service fees so that you can keep replacing one faulty part for another? STAND BY YOUR PRODUCT!

I purchased 9k total for all GE appliances, their dishwashers are flat junk, the bright side is I made a friend with their repairman ha aha ah true story!!! Dont buy, lot of other better choices and lots more reliable. P.S. Customer support terrible.

I love GE's washing machines front loader and it's excellent. I've never had to have them come out and four years to fix anything on it. Cleans very well and washes the clothes outstanding and it cleans up very easily when you clean it through the cycle that comes with the machine. It's relatively easy to understand as far as the button setup on there. I also liked that you get the echo warm in the Echo cold features along with the regular warm and cold. I did purchase the block that the time that I got it which helped out a lot is I'm 5 foot 10 and it's the perfect height. It helps getting stains out really easy as I have a nice here to play softball. I would definitely recommend this washer to anybody and everybody. I even wash my huge comforter for my bed in it and it washes it great every time.

GE Profile Microwave JVM1850DMCC - For the third time in 5.5 years, Ive experienced a magnetron failure in a GE Profile Microwave. The first failure was fixed under warranty. The second was so bad, the microwave had to be replaced, but it was no longer under warranty. I should have heeded the warning and gone to another brand, but on 12/31/10, I paid over $500 to replace the microwave with a new GE Profile to match the existing appliances. Apparently this was a big mistake as the magnetron has failed yet again. The microwave is on its own separate 20A circuit, so that shouldnt be an issue. It would seem, however, based on the number of complaints I see on this site, there is something inherently wrong with the manufacture of these microwaves, or more specifically the magnetrons. Im extremely disgusted at this point.