We moved into a new home in June of 2011 with the appliances already included. Ours came equipped with a GE, over-the-range microwave, model JVM1540DP1WW, manufactured in Malaysia, in April of 2010. Within several months, the revolving platter began to make a bumping noise while turning and then it eventually quit turning altogether. Five service calls later, we had the platter motor replaced, circuit board and four fan motors (apparently the platter has voltage supplied from that fan to make it run) and it still didnt work.It was taken back to the shop and eventually the problem was traced to a loose wire on a terminal connector. After a month of operation, it is again beginning to make the bumping noise while the platter turns. To top it off, Consumer Reports (the March issue) deals with problematic microwaves, especially the GE model and the unexpected fires that can occur. In addition, they can be susceptible to (not always however and only on certain models) wireless transmissions which could potentially cause them to start on their own. I know for a fact that it knocks off my XM Satellite Radio when it is running. Bottom line...its history and will be replaced with a check rated appliance before I too have a major problem.

I have microwaved many types of food in mine! Remember, it’s not just for reheating leftovers! I have cooked fish, and chicken successfully. Those turned out juicy and tender. I follow directions from a microwave cookbook. It’s easy and clean up is a snap.

Not very satisfied with the functionality. Turntable does not work or has ever worked. Time features and power adjustments are not very intuitive. I would not recommend this brand, I believe there are other brands out there are much better for the same price range.

GE Profile GLD4408RBB: Bought this dishwasher at Home Depot 2010 for our FL condo. We visit there periodically, dont rent out. We have used this dishwasher probably 50 times since buying. It never wash dishes well, leaving residue and we do clean them first. Now it doesnt drain; seems like pump not working. Its only five years old and hardly used. Its not worth having a repairman for labor and cost of parts. Very disappointed with GE product and wont buy another one.

I bought GE Profile dishwasher (PDT750SSFSS) from Home Depot on Sept 2014. First week it had some drying issue and GE service technician told no issue with dishwasher. After 4 months, electronic control board stopped working and GE service technician replaced the board. It worked for about a month and again same control electronic board failed and need to be replaced by GE technician. Again within a week again board failed for 3rd time. This time I asked for a replacement from GE since same board failed 3 times but GE refused to replace and told they can only repair and cannot give a replacement of dishwasher. Again for 4th time same control board failed now and I have contacted Home Depot for help. I dont know what to do this time and I dont want to repair this dishwasher anymore. It is only June 2015 and it had been repaired for more than 4 times. Ill try through Home Depot to get a replacement, if not Im planning to go through consumer court and file case against GE Profile. I would appreciate if somebody can help in resolving this issue and you can contact me through my email.

I bought a brand new house and it came with the set of GE profile appliances in 10/2009. In November of this year, it came on for one minute on its own and then popped and indicated a circuit board failure. The inside of the microwave was extremely hot and there was obviously an electrical short. This could have burned down my house! My fiance replaced the circuit board at a cost of $125. I negotiated from the service department that supplied all my builders appliances. This week it happened again. This time, there was a cup of coffee in the microwave and it boiled in the minute before the microwave fried itself! I cant believe that GE still has this product on the market! Any product on the market! I have to replace this because I cant sleep thinking its going to catch my house on fire. Are there no ethics anywhere?

July 4th, 2010 - GE Profile Dishwasher, Model: PDW9200N00BB, Dishwasher had been humming after cycle was over for a little while, this night I walk into the kitchen late and find it full of smoke. Circuit board has a hole burned though it and wiring harness is melted. Never tripped any safety, could close the door and it would come right back on, smoke and all. This model was not on the recall list but I called GE anyway. After describing the fire they send someone out, then they send a new dishwasher out and install it. I assume they wanted the old one to look over or just to get rid of it. New washer installed the end of July 2010, new model number PDWT500R10BB. Today is 2012-02-02 and the new machine would not stop at end of cycle (Got down to 1 minute and stay there for at least 20 minutes before we turned it off). This machine is now making the continuous hum after the cycle stops that the old one did before it caught on fire.Called GE, they said they could maybe go half on parts and service until they checked where I was located. (Wichita, KS. Area population 500,000+) They said that they didnt send factory techs to my area and I would need to contact a local repair service. I pointed out that they had a factory guy for when my machine was on fire and they said it was just a malfunction now, so they could not. No half on the price for repair either at this point. This is a $1100 to $1200 dishwasher with, as near as I can tell from complaints online, a history of going up in flames. I understand things break etc, but when you continue to put out products like this and then refuse to remedy the problem, I and anyone who will listened to me will never own anything GE again.

I purchased all GE Profile & Café appliances when we remodeled our kitchen in 2012. The DW has never cleaned well. I have contacted GE through email several times and now I have to handwash all of the silverware and re-wash most of the dishes. At times, glasses and silverware come out worse than when they went in. We have checked the water temp, pipe size. We use recommended detergent and finish rinse. We had a service call from a reputable appliance repair person, we purchased the recommended citric acid and performed the recommended protocol. This thing stinks! GE recommended another service call. I had a 20+ year old KitchenAid prior to this and it worked like a champ! Never an issue. I am ready to toss it out and buy something else (but it wont match!). Any suggestions?!!

We bought a GE dishwasher a little over 3 years ago. In the last week of September we awoke to the smell of hot or melted plastic. We found the source to be the dishwasher. I had loaded and started it before going to bed the night before. The counter-top above the dishwasher was stove top hot and upon opening the dishwasher found that a cutting board that we have had for many years and have always put in the dishwasher had melted on top of the heating coil. Dishwasher safe items on the top rack melted as well. It had been drying for at least 9 hours. After pulling the dishwasher out we saw the heat shield had melted and was crumbling. We contacted GE, sent them all the pictures and they told us it was not a safety issue. We have no doubt that if we had not woken up so early we would have had a fire in our house caused by the dishwasher.

I am now facing my 5th repair appt about my 2 year old microwave. I have spent nearly $300 on repairs to be told I can purchase a new one for 50% off. Well, $426 plus my $275 I have paid IS A NEW One! 20 hours of me having to be available for service. I did not know the life of this appliance was 2 years. GE complaint number **. This is an unacceptable resolution offered by GE!

GE Dishwashers are very dependable and do a great job. I have not experienced any issues with mine. The pricing is very competitive and easy on the wallet. You may be able to find a cheaper dishwasher but just remember, you get what you pay for.

GE had a recall but only gives you 50.00$ to replace it or fix it. We could not afford a new dishwasher. I talked to GE and they were no help at all. So we still use this machine but we do not run it unless we are home. This was the machine that would catch fire.

GE microwaves are crap. In fact its not restricted to microwaves. Its their ENTIRE line of appliances. They team up with other grade e or f manufacturers for appliances (ie: LG, Samsung) and ANY GE appliance is almost guaranteed to fail prematurely. I see all these comments bucking Malaysia and in all reality the fact remains that Malaysia makes damn good stuff (think SONY). But it is the COMPANIES that build the products and how much theyre getting paid that factors quality. No doubt that GE is using the bottom dweller rejected off the assembly line parts to build their units. Most are Chinese garbage. China also builds some very reliable products but as the saying goes dumb American will buy anything. They save the best for them and sell us the crap.It is the lowest grade of those already should have been scrapped at the factory parts that GE passes off as quality and they do a good job at showing it. A cheap 30 dollar China made Emerson microwave made by Daewoo (Korean company that actually is decent) lasts longer and takes a hell of a beating compared to the overpriced rejected junk we call GE. The GE ac units are another classic example of pure garbage. Sadly the older GE works forever. That should sum it up. Why didnt the GE executives while visiting Thomas Edisons grave make every effort to step away from his grave and not stand upon it? Because Thomas Edison would pull them under.

In 2008 I redid the entire kitchen and purchased all GE Profile stainless steel appliances thinking I was purchasing quality items. Well, it didnt take long before the dishwasher broke but it was fixed for free by GE under a recall. However, now the refrigerator has begun to leak under the right corner of the ice/water dispenser located on exterior of freezer door and the microwave touchpad has also failed as I need to press below the actual keys for it to work half the time. When I spoke with GE customer service they basically told me there was nothing they could do with the refrigerator, I would have to call a repairman and have it looked at or pay their $100 diagnosis fee.The microwave they told me had issues with that particular touchpad and had it broken within first 5 years they would have repaired it for free under their recall program. But since its 7 1/2 years old I would have to buy the touchpad which normally only lasts for 6 months to 1 year or buy a new GE microwave and they would offer a rebate. Im so unhappy with their customer service and poor reliability of their products that Ive passed on each offer as I dont want to contribute another penny to a company that in my opinion is unethical and has horrible reliability. 3 out of 4 of my fancy GE Profile stainless appliances have broken! Thats a 75% failure rate! No thanks, Ill buy elsewhere. No wonder they cant sell their appliance business and why the stock hasnt moved in years... Wake Up GE, do whats right for your customers!

We have a lower end GE stainless steel model that came with the purchase of our new build home. The washer is just average and does not have a huge capacity. For only 2 people in the house it gets the job done in general.

Model GLD5660V00SS - seems to be an entry-level dishwasher compared to others I have used/had in the past. It is rather small inside - usually have to run it every day or every other day for just two of us. It is plastic inside and the wheels have already come off a couple of times even though Ive only been using it since July. Having said that, it does a decent job cleaning and is easy to load. The outside with the stainless panel is attractive and the controls are easy to use. It has a large, removable silverware bin that keeps silverware from nesting. However, the holes are not large enough for the knives to fit in properly. The tops are removable, so I can just put them in another section.

GE Cafe Dishwasher Model CDW9380N00SS - The dishwasher is just under 5 years old and is used approximately once daily for lightly soiled dishes, usually only half full since there’s only 2 of us in the house. On 12/28/2012, I ran the dishwasher on a normal cycle, no additional heat or heated drying and the cycle finished about 9pm. I did not open or unload the unit and went to bed. About midnight my wife smelled smoke and woke me up. We ran downstairs to find the dishwasher blazing hot and the smell of burning plastic coming from the dishwasher. I killed the circuit breaker and opened the dishwasher door. The whole first floor of the house smelled liked burned plastic and we had to open all the windows and doors in 28 degree winter weather to vent the smell. The bottom heating element had come on and stayed on! The entire bottom of the flatware basket was melted out and all the forks, knives and spoons were in the melted plastic goo in the bottom of the dishwasher. The wheels melted off the bottom wash rack and the lower wash arm melted and burned. Also, the plastic screen in the bottom of the dishwasher is twisted and distorted. Some dishwasher safe items like the glass coffee maker carafe with the plastic handle and rim are unusable since the high heat distorted the plastic parts. They were on the top rack. We feel fortunate that first, my wife smelled it and woke up. Second, the dishwasher tub is stainless steel and so it contained the heat and lastly, that our counter tops are granite since directly above the dishwasher, the counter was hot enough that you could not hold your hand on it comfortably. GE is coming today to evaluate the dishwasher and determine what, if anything, they will do. It is not under warranty, but as I told GE, it’s a safety concern. We dont want it fixed, we want a new one. Nobody expects a 4-5 year old top of the line dishwasher from a company like GE to be a fire hazard in their home. This dishwasher cost over $1,100.00 in 2008. My questions: why would the heat element come on at all given the settings? Second, why did it come on after the cycle ended and the indicator lights said clean? Third, why isnt there a high heat shut off switch that would have killed the power in a circumstance like this? And fourth, since I see other consumers with Cafe Dishwashers have had similar concerns, why isnt there a recall on this model? There are recalls on many other models it seems for heating element malfunctions. I believe that any action other than replacement, even after the warranty period, is irresponsible on the part of GE, but the cost of law suits and settlements maybe less than the cost of replacements or recalls. What of the potential cost of lost lives?

GE Profile Microwave JVM1850DMCC - For the third time in 5.5 years, Ive experienced a magnetron failure in a GE Profile Microwave. The first failure was fixed under warranty. The second was so bad, the microwave had to be replaced, but it was no longer under warranty. I should have heeded the warning and gone to another brand, but on 12/31/10, I paid over $500 to replace the microwave with a new GE Profile to match the existing appliances. Apparently this was a big mistake as the magnetron has failed yet again. The microwave is on its own separate 20A circuit, so that shouldnt be an issue. It would seem, however, based on the number of complaints I see on this site, there is something inherently wrong with the manufacture of these microwaves, or more specifically the magnetrons. Im extremely disgusted at this point.

GE Profile Microwave wall oven combo model PT970SOM1SS - We have a few years old unit very gently used. However, we now have the paint peeling and flaking from the top and back interior wall of the microwave. Some spots have bare metal exposed. Contacted GE and they told me there was no fix for it other than replacing the device. Now they cannot replace the Microwave alone. The whole unit has to be replaced at a cost of ~ $2800.00. This is ridiculous. There should be a recall as there are several other complaints about similar issues.

I have a GE microwave and was using the exhaust fan on it when it stopped working. I am getting the same message as other folks - KEYPAD SHORTED. I have barely used this product since it is in a vacation home. It looks brand new, but I am really disappointed in it. My cousin told me shes had problems with GE appliances and will never buy another.

I purchased the dishwasher in August. In September, two months later, it would not drain. GE sent a service tech out under warranty who found food particles stuck in the drain pump, removed them, put the dishwasher back together and went on his way. Since then, we have been basically rinsing the dishes clean before even putting them into the dishwasher as, obviously, this dishwasher cant handle much. I have also been keeping the drain filter screen spotless. Two months later, the drain is clogged again. GE sent a second tech out who said that the first tech should have repaired the dishwasher.The problem is that GE knows that the drain pump screen and the filter screens are inadequate and let food to pass through and block the pump. GE has redesigned the pump and the screens and filters and even added a filter to the design and we will get all these new parts installed for free and the dishwasher will then work as it should. Tech ordered the parts on 12/21. The service call was scheduled for tomorrow, 12/27. I got a call today from GE saying the parts had not been delivered. I know this because they are being shipped to my house and they have not arrived. GE called to reschedule the service call to January 6th, 2020--another week and a half away!!!! Clearly, this dishwasher is not working as it should and GE has a problem on their hands. I am now weighing my options as I sit on hold on GEs Customer Service line as I wait for someone to complain to. But as the dishwasher is still only a few months old, I am tempted to load it up and bring it back to the big box retailer from whom I purchased it and demand a refund. This is ridiculous!!!!

I just found the site for the review on 5/17. Ive had two GE Cafe microwaves model CVM2072SM3SS purchased at the same time for the two kitchens in the house. The microwave in the in-law suite lasted one year and I replaced it with a very economical one which has been fine for 3 years. The electrician could not repair it. The microwave in the main kitchen is 5 years old but it stopped working (same issue of frozen panel) after 4 years. In Nov. 2016, during Thanksgiving weekend, it froze and stopped working. I looked on YouTube and we cleaned the terminals in the panel using alcohol. That worked for 2 months. When it stopped again I tried the same remedy but it did not work. The panel lights up, but it will not respond to any commands. After 7 months of it being inoperable, I decided to either fix or replace it (while using a way cheaper GE from a friend).This is an abysmally poorly engineered VERY expensive microwave. The LED panel is a disgrace! Do not buy CAFE microwaves. Im out $1500+ (for two) plus the replacements, the aggravation, the ugly looking counter with the loaner from my friend. I am ready to bite the bullet and buy a microwave that fits the style of my kitchen. It wont be a CAFE! Although it is a set... Enough is enough. I give up.

I purchased this GE Adora dishwasher about 3 years ago from Home Depot and it cost about $550 which I think should translate into a well made dishwasher. I only run it about twice a week so it gets low use. On inspection this month I noticed the racks were already starting to rust and that there was a tear in the door gasket. I called the 800 number for GE consumers and they told me they could order me the racks for $200 a piece and that they would send out a repairman for $139 plus the $40 part. This is more than the dishwasher cost. They also told me I should have purchased the extended warranty and that this particular dishwasher has only a one year warranty. What happened to GE? My family has GE refrigerators for years without an issue and my dishwasher is already exhibiting problems after 3 years.

Bought a new home. GE appliances came with our purchase so it was not our choice. Dishwasher leaked and ruined our wall. Service would not bring us a new dishwasher, they wanted to repair a brand new dishwasher that has multiple problems and damaged our new home. The service guy was such an ASS! Im in my late 30s and this guy was in his 50s and he was acting like one of the mean girls. The dirty looks he gave me! Wow. He said he fixed it, and Im actually running it now. We will see what happens. What junk! I know its going to leak again when we put the new wall in. Especially after reading these reviews!

Our GE microwave, manufactured in 2012, has been running fine, but the door handle has cracked on the bottom. Imagine my shock when I found the cheapest price for a PLASTIC handle was well over $100. How can this be?

The flat, firm-press keypad for microwaves just seems dated. Often they get worn out. However, all in all, it does what a microwave is supposed to do and does so efficiently. It’s not the most attractive microwave though.

When we purchased our home it came with GE appliances which was covered under a one-year warranty. My microwave has been broken for nearly 3 months. It is almost impossible to get a service tech to come out immediately. GE customer service is the worst I have ever dealt with. They are unprofessional and unreliable. Most of all uneducated about their job. If I could return all of the items in my house that were made by GE back to the seller I would in a heartbeat. The Appliances are poorly made and the customer service is too difficult to deal with it. It’s not worth the money or the Headache... Stay away from GE appliances.

Front of door never seems to clean up well and its stainless steel. Occasionally if you use the start delay and a harder pod it can stick and not dispense fully during wash leaving a chunk of it. I love the ability to run half loads. Smartly designed, and easy to use.

We did not choose our dishwasher. It was installed by the builder but its served us well for the last 3 years. Its good quality and cleans the dishes well. It is also relatively quiet while its washing.

GE profile microwave TOUCH SCREEN pvm2070sm4ss - Almost new. Used properly. Touch screen failure. TOUCH SCREEN does not function properly making it almost impossible to use the microwave. This Common Problem should be a RECALL.........

I have been trying since April 4th to get my GE Profile dishwasher fixed. It is July 24th as I write this review. I have had two different technicians come out. It still does not work. After the 2nd technician came out I ran my dishwasher and at 2AM realized something was wrong because it was still running. I came into the kitchen to find my entire kitchen floor flooded in boiling hot water, ruining my cabinet baseboards. I have since had two service calls canceled at the end of the time designated and today I have no technician showing up. Customer no-service is saying technician tried to call me; I have recd no call and have no message left. I have taken multiple days off work to sit at home waiting, and waiting. And this is after two already came out. ABSOLUTELY AWFUL SERVICE.

Ive had a GE Dishwasher for over 6 years and it works great. The issue is every 2 years or so, the plastic over the metal rods that make up the plate racks wear away and rust the underlying metal. The first time GE charged me about 200.00 for the racks, where the dishwasher only cost 250.00. The second time they replaced for free and now this third time, GE is being absolutely absurd not replacing these racks. My concern for mine is the health issues arising from having rusted parts in the washer. I believe this to be a manufacturers defect and could be happening in 1000s of these dishwashers. Metal should not go into water!!! GE should gladly replace my racks but theyre giving me a major problem, like take our offer or dont bother us. Please see the attached pictures and hopefully this doesnt happen to your dishwashers.

2 year old GE ADORA dishwasher - I am so disturbed tonight after seeing what happened to the protection rubber that is on the exterior of my dishwasher. I decided to buy a new dishwasher because the bottom tray would not stop when pulled out at the correct stopping point. Today I got my new dishwasher installed and when the installers pulled the old one out I was shocked to see that the protectant that I would assume was placed to protect my house was melted all over my wall behind the dishwasher. WOW. Talk about a MAJOR fire hazard. Thank God my house didnt catch on fire because of this faulty equipment. Check out my pictures and you will see the pile of protectant that was under, on my wall, and behind the dishwasher once it was pulled out. Sincerely concerned.

My husband and I bought a GE dishwasher from Nebraska Furniture Mart in April 2011. We installed it in our new home in May 2011. It has never cleaned our dishes properly. Our dishes come out of the dishwasher with a film on them and do not look clean at all. I called GE in July. They sent out a repair person who proceeded to tell me that we were not cleaning our dishes well enough. The person also told me that our water wasnt hot enough, we didnt clean our dishwasher out often enough, etc. After I corrected everything, the repairman suggested our dishwasher still wasnt working properly. So, we called GE back. We have since had two additional repair men out. Neither one has been able to repair the dishwasher. The last repairman replaced a valve he thought might be broken. However, it is still working the same. I am absolutely disgusted with the experience I have had with GE.

We had a new GE Monogram dishwasher installed September 2014, a little over a year. We had a hose leak and it cost us $229.00. I do not recommend this product.

My Microwave oven is 22 years old. It still works fine, but does not have power levels on it. The reheat is vague and I have to keep checking so things dont burn or dry up. The dishes get very hot after about only three minutes. Other than that, it is easy to clean and still looks good.

I rarely use it. I know to avoid too close to the signals produced in the microwave and use it only about once a month.

Slightly more than one year, I purchased a model GLD4404RCC dishwasher about which I have made complaints in the past, concerning poor washing performance and which you chose to ignore beyond attempting to tell me how to use it. Now, this Chinese-made piece of junk has begun to give different problems. Upon completion of the wash cycle, it starts to make a lot of noise and will not shut down. I must do this manually. Guess what? It has waited less than two weeks after the purchase date to do this, meaning it is out of warranty. We have just purchased a new home and will be needing new appliances such as dishwasher, refrigerator, washer and dryer, and a water heater. It will not be GE. I shall never purchase any more of GE products as the whole company stinks.

I recently purchased a GDT696SSFSS Serial #SWGF800933C GE dishwasher. From the moment I tried to use it there was a leaking water to the floor from the back wall. I contacted the store that referred me to GE stating that their role ended when we received the dishwasher (long story..). I called GE service and when they came the technician said needs seal mat and offered to repair (the dishwasher has been installed in the garage since the water that comes out flood the kitchen floor and we cant afford having the floor damaged). But I had no faith whatsoever in this dishwasher (I was told if the problem happen again and damage my floor they will only offer to repair the dishwasher and I have to go to the insurance to repair my floor) or GE and said I wanted my money back. They did not even offered a replacement. It is still a brand new machine, I never use it.

It works great. My microwave is a small white one that has the power to heat or make a dinner. I enjoy using it. I just press how much time I need and the microwave turns on and it either warms up my meal or cooks it.

The dishwasher malfunctioned and flooded our home. The dishwasher continued to run even with the door open and the display showing “leak detected”. We had started it before we left the house and it had been running for about 20 minutes when we left. When we came home hours later, hot water was still being produced by the dishwasher and had flooded our kitchen and basement. We could not stop the dishwasher with buttons at that point and had turn off electrical and water supply to it. The absolute worst part is they will not replace or refund it even though it’s less than six months old. They are only offering to service it and expect me to continue using it.

I owned a previous GE dishwasher 4 years ago and would give it excellent ratings. I bought a newer top of the line version when I purchased a new home. It simply fails to clean dishes. Wet food that any dishwasher would remove, remained on the dishes. The drying cycle never dried the dishes. We have to hand wash the dishes now and have stopped using the dishwasher after 3 days of ownership because of health hazard. I called Lowes about this within days of the install. Lowes sent out the installer who claimed the machine was installed properly. Then Lowes scheduled a GE repairman to come to the home. We waited all day for him to arrive for a morning appointment. He never came. Lowes stepped up and is replacing the dishwasher with a non-GE product. I would not touch a GE product again given the lack of service and commitment to their product. I feel confident with Lowes, but not with GE - their ethics from engineering, manufacturing and servicing are very suspect with us.

Bought the new dishwasher in Dec. 2013. In November 2014 a month shy of warranty expire, the detergent dispenser did not release or partially released the detergent. GE sent out A&E Factory service to fix. First visit initiated the parts order which was a new computer board and a Cascade Series detergent dispenser. A month later the second visit to install parts, the A&E tech was at our home for 3 hours and it took that long to remove and replace detergent dispenser. The tech did not replace computer board stating it was not needed? A week later the detergent dispenser still did not release the detergent! Called back to set up another appointment which was at the earliest Jan 19th 2015. Meanwhile last Friday Jan. 9th 2015 the dishwasher started to smoke heavily causing smoke detector to go off at 9 p.m. at night. Thank goodness!! We were home so that I could disconnect the power. Third visit was 1/12/15 and was informed by Lead A&E tech that the board should have been replaced and that the tech that was sent out was a trainee and inexperienced to work on my dishwasher. He should of never worked on my dishwasher(!!) according to the Lead A&E tech. The Lead A&E tech also stated that my model has had a problem with the computer boards which is essentially the brain of the dishwasher. I am currently taking my fight back to GE since A&E Factory is a subcontractor to GE and is not authorized to replace appliances. I told GE that I want a new dishwasher that is not using the problem computer boards even if it is an upgrade. It is not our fault that they have work with A&E who send out inexperienced techs to work on complicated GE appliances. We want a dishwasher that we both feel safe to run while we are not home. Is that too much to ask for?

No matter what it is whether it's a GE hot water heater, an iPhone, a car or a frozen TV dinner, you're going to find someone that had a bad experience. After a day of rain eight years after I put in my Home Depot GE hot water heater, the pilot was out. I don't know if it was wet in there or what but it took me 10 hours of repeated attempts and while I was searching online for answers and deals on replacing it, I kept trying. And tonight at 10:30 PM I didn't bugger about, I just held down the pilot for one minute, and then once the pilot remained lit on its own, as fast as I could I turned the thermostat to medium high and kaboom it lit up wonderfully. Maybe it dried out but I would not say that GE water heaters are a piece of Home Depot junk. As I said earlier I installed mine eight years ago and it has never had a problem and since tonight it restarted and I checked the tap and now have hot water. I suspect it will be fine but if I need a new one, eight years hasn't been a bad run. Just follow the instructions very carefully and repeat and repeat and repeat. Good luck.

We bought a suite of Slate GE appliances during kitchen remodel 2 years ago. Weve had the dishwasher, model GDT580SMF2ES, motor replaced twice now and it is still loud and stops intermittently. Thank goodness we have the extended warranty! The over stove microwave is now starting to run when we just shut the door and stops intermittently. Were ready to replace everything with a reliable brand and cut our losses. We will never buy GE again.

My 11-month-old GE Advantium oven no longer has any display, totally blank. When calling to make an appointment I was unable to speak to a live person but scheduled one for today from 1-5 pm. At 5 pm I received an automated call that the technician was running behind and would arrive in about an hour. By 8:30 pm no one called or came to repair my oven. At 4 pm when I was wondering if I would see a repairman I attempted to find on the internet a phone number that would connect me to a live person but had no luck. I have no idea what company is being sent out to make the repairs so that I can get in touch with them. Their service sucks.

My GE Profile Dishwasher was serviced 2 years ago for a faulty electronic control pad. It made starting the dishwasher a complete gamble, you never knew when it would actually turn on. I paid a couple hundred dollars to fix this problem 2 years ago and of course it has stopped working once again. So frustrating! GE decides to replace one bad part for another bad part. I then asked for the service call to be covered since it was obviously the same problem but they refused. So, GE am I to keep paying $89 for service fees so that you can keep replacing one faulty part for another? STAND BY YOUR PRODUCT!

Looks great after 7 years, still works good. Could use larger drawers and the soap dispenser hasnt opened a few times. After 5 years of use weve had to rerun the to clean the dishes.

Not a very good job at cleaning, plus takes over two hours to run. It has a steam function, to help clean grease off of dishes, and should be used for simple cleaning too. Although the instructions state it can hold settings of 8, we have never been able to use more than 4 before it is packed. The utensil holders are almost useless. It has nice lighting for controls and a clean front. The installations instructions are not very good. They also did not include an elbow to connect to the water supply, which the hardware store manager said is standard connection, so GE just wanted to save $4.00 and piss off the customers instead.

GE Stainless steel dishwasher rust inside. Its more show than function. Size is great. GE stated in writing that this is normal for GE stainless steel appliances as GE stainless steel is not real stainless steel. Rust is not covered by GE warranty!

I purchased a GE Profile Microwave 2 1/2 years ago and now it is shooting sparks out the back and making a loud noise. I have to admit that the microwave did work well and my mom even bought the same one because it was good. I never bought a GE appliance before because I was told they have a bad reputation. I thought the Profile Series would be better. Wrong!

After a year and 1 day of use the microwave blew out and got in fire. Fortunately I was nearby and was able to extinguish the fire. I called the customer service that told me the warranty was over and all they can do is give me a discount on the purchase of another unit, and that I was on my own for the collateral damages due to the fire!

Have owned, installed, and repaired many dishwashers throughout the years at various houses. This GE unit is by far worst dishwasher that I have ever had the displeasure to install and operate, and it replaces a Kitchen Aid unit that started a fire, see **. Specifically the GE unit had the control panel break off due to misalignment, requiring repair, the drain bulkhead fitting was poorly designed and caused a leak, requiring repair, the water solenoid valve failed in the 2nd year, and finally the door does not lock closed without significant care and attention to alignment and requires many attempts to lock closed for the start of cycle. This is the worst and I cant wait to pull it out and replace it.

Our new GE dishwasher is a disappointment. 1. There is water on the door after the dishes wash. 2. There is soap on the door after the dishes wash. 3. The silverware is often dirty after the dishes wash.I have observed the following: 1. The reason for the water is the silverware trays are made of plastic and do not dry. They should make them of coated wire like they used to. 2. The soap tray is often prevented from opening all the way by the silverware in the rack. They should re-design the bottom rack. 3. The silverware tray is too enclosed for good cleaning. It should be made of coated wire like they used to.

Generally ok, but the entire wash cycles take way too long. Certainly much longer than the older models. I guess thats more or less the case with most dishwashers today. It makes me hesitant to use the dishwasher when I consider all the energy it takes to function. I would prefer having a setting for speedier rinse/wash of just a few dishes.

GE Stainless Steel Profile Dishwasher - My dishwasher is about 5 years old. Two years ago, we noticed that the gaskets, both around the tub and on the bottom of the door, were becoming gummy and rippling. We were hoping to make it another couple of years before buying a new dishwasher, but a couple of week ago, the top arm fell off because the gasket was so degraded. We ordered the appropriate parts and were only able to replace the top-arm gasket and the tub gasket. We had to call an authorized GE repairman, specifically RC Appliance in Sparks, NV. When he tried to get the gasket out, his hands turned black from the rubber. After about an hour of trying to get the new gasket installed, he had to use his pliers to crimp the gasket in place leaving large dents along the bottom edge of the door. He said the factory had crimped the old gasket in place at the factory from the other side. I am extremely unhappy about the workmanship and the fact that the gaskets did not last a reasonable time. I dont want to seek an attorney, but would rather GE contact me to discuss what must be done.

I purchased a GE dishwasher, stove and refrigerator in December 2012. All 3 appliances have broken, needed parts (which were also broken) and I still have appliances that arent working appropriately. The dishwasher door broke and it doesnt clean or dry well. The induction stove (the main burner) doesnt work and the replacement part was delivered to my house and that was delivered broken. The fan in the refrigerator broke and still remains broken. I have had nothing but headaches since the day the appliances were delivered. I would not recommend GE appliances.

I bought GE Profile appliances 5 years ago. The dishwasher motor needs a new one. It cost me $300.00 to fix and I ended up buying a new dishwasher, of course, no more GE. Six months ago, my GE profile fridge is not making ice. It cost me $300.00 to fix. Now, the freezer is not working right. I was told another $300+ to fix. I went out and bought a new fridge. Back to basic, Kenmore brand. GE profile is not inexpensive and only last 5 years, starting to break down. Please stay away from this company.

I also have a GE Profile dishwasher with malfunctioning wheels. I read this site, and was comforted and enraged that I was not alone with my melting wheels. I sent GE customer service a note, explaining my problem. I also included a link to this site in my note. I explained that I was a loyal GE customer and that they should stand behind their products although my unit was no longer covered under warranty and did not qualify for the recall. GE responded to my e-mail with in 12 hours. They sent me a complete set of new wheels for my bottom rack free of charge, and sent out a technician to install them, again free of charge. They also e-mailed me to make sure I was happy and no longer had concerns. I am thrilled with my experience. Let me say that again I e-mailed GE and within 8 days (a holiday included), I had new wheels and a technician to install them at no charge.

Worst experience ever. Bought the dishwasher in Jan 2014. The washer does not wash. Three different technicians have passed by, cant fix the machine. Awful customer service, routine answers, file not assigned, cant talk to a manager.

I have a General Electric HVM1540DN1WW over the stove microwave that I have had. This month will be a year and a half. The oven stopped heating so being a DIY person, I pulled the oven out and took it to my workshop to see if it was something I could repair. Inside the front panel was a very helpful schematic of the whole oven. Using the troubleshooting step listed on the paper, I found that the Magnetron tube had gone out. So I went to my owners manual and found that the tube had a four-year warranty on it so I called General Electric consumer relations to have the part replaced. First I had to fight with them because they said it was only covered for a year. After about an hour and a half on the phone and giving her the publication number on the manual, she agreed that it was indeed covered for four years. So she said that she would replace the part and she would even send a technician out to install it at no charge. I was very happy at this point. She said that she would ship the part to me next day with UPS and the tech would be out the following day to replace it. So far so good, till the next day when the part did not arrive. I called back in to General Electric consumer relations and spoke with a man this time and he told me that she had canceled the order that is why I did not receive it, and he couldnt see why. So he looked at the comments she had made the day before and did see that she said she would replace it and send a tech. The tech was supposed to be here the next day and I had no part for him to install. The man said he would place the order and have it shipped to me by the next day no later than 10 a.m. and the tech would be here between 1 to 5 p.m. Great! Until the next day and again no part when they said it would be there. Again with the call only to find out that it was scheduled to arrive next day guaranteed by 7 p.m. The tech is supposed to be there with in the next few hours and I wouldnt have the part. I called Fed-Ex and sweet-talked the lady into getting a hold of her driver to see if she could get to me ASAP. Bingo, next thing you know I have the part, the tech calls and the part is replaced. Oh boy, the big gaping hole above my stove is finally going to be filled once again. (I promise I am coming to the end.) After reinstalling the oven, I found out that it was taking longer to heat than when I got it, and it has a brand new Magnetron in it.Again with the call to General Electric consumer relations to set up another tech to come out and check it out. So the following day, the same tech arrives and puts a cup of just barely cool water in it and puts it in for 30 seconds, pulls the water out and says it is working just like it is supposed to and leaves. Well, again I called General Electric consumer relations to let them know what has transpired, but this time I asked to speak with someone higher up the food chain. I then spoke to a lady and she said that she would set up another tech to come out and check it out, and if it resulted in the same way that she would replace the unit with a new one. The following day, the same tech calls me and said that the oven is working the best that it could so I should call back to consumer relations as he did and set it up for a new one to be sent in its place. So I called once again and was not able to speak with the same lady and the only thing she could do is send me a voucher for $250 laying around for a new oven, but I would have to purchase one and send the voucher in with the receipt to get a refund. I told her that I did not have a spare $250 dollars around to go buy a new oven and then wait for the refund to get to me. So I asked that she have the lady that said she would replace it to call me back to straighten this problem out. Finally the following week, the lady calls me back and said, This is the best that I can do, due to me voiding the warranty. I asked, What? She said that the tech that spoke with me said that because I had hard wired in the unit to the house wiring, it was receiving low voltage so she couldnt do any better than that. I told her that was the most asinine comment I have ever heard coming from a field tech and asked her whether he went to a school backyard Techs-r-Us. I asked if she would have the tech call me to explain. I also gave her some friendly advice that she should not use that comment to anyone else for fear of someone laughing at her. We agreed to have the voucher sent if that was the best she could do. I will not buy another GE appliance again! I have purposely not mentioned anyones name because it was the experience, not the person that I spoke with.

We had a GE dishwasher installed by the builder when the house we live in was built and it was one of the ones which were recalled as a fire hazard. We didnt really have any issues with it though, other than it was a bit noisy. With the credit offered, we decided to upgrade to a high end Profile model. The sound proofing is impressive and it was actually hard to tell the unit was on, but that is the only thing you can say that is good about the machine. As a dishwasher, it fails miserably and often items come out dirtier than when they went in. OK, weve struggled on with that for some time now but today, a nasty burnt plastic smell brought us both to the kitchen to investigate. Sure enough, the replacement for the fire hazard was the culprit. Obviously, it will need some serious repairs before it is safe to use once more. Looking through this and other sites, it seems this problem is rife and GE is reluctant to deal with the issues. Well I think that will be our last GE appliance. Thank you very much and rather than throw good money after bad, we will put the repair costs towards another machine ABGE.

Has anyone experienced a plastic burning smell when the dishes are drying? My dishwasher is 3 years old and I wash on Light cycle which is suppose to be 45 minutes long but goes for 85 minutes. Company said to turn off circuit breaker and turn back on and it should be fine, it isnt. Last two times I used the dishwasher it wouldnt completely shut down so I had to do it manually and before I did this I could smell a plastic burning smell but there was nothing on the elements. I called for a service call but they were shut down for 4 days.

We bought the countertop stainless steel microwave model JES1142SJ the end of 2010. Noticed a rust ring under the revolving paint about a month ago. The paint was chipped off and when I washed it with a dish cloth, more came off. It is getting worse. We didnt stop using it since it seems it is only coming off under the plate but is it safe to continue using? Could it catch fire? Is it putting bad things in the food we heat in it? Even though it is not an expensive microwave ($100-$125) it should not be rusting inside. It should last longer than 3 years!Sounds like GE will not back up their products since so many microwaves owners are complaining about the paint being inferior and flaking off. There should be a recall for this problem on all microwaves sold by GE. Complaints have been from countertop to the most expensive dual stoves! This is not acceptable and GE needs to step up and deal with the problem with their microwaves that they sell. I usually buy GE; but this is making me have 2nd thoughts and think that my ones I bought in 2010 will be the last purchased from GE.They did come out twice for my range when the oven stopped working at 2 years and one of the eye knobs to turn on and off needed to be replaced when it would not turn off. But a 2 year old stove should not have needed any repairs. I noticed a big difference in quality after I bought this new one when we moved. My old GE from 1996 is still my favorite one and is still working just fine in my sons house.

Dishwasher looks and works beautifully. It is slate black and I have never had to redo any dish or glass. It is located. About 12’ from our bedroom door and we turn in on before go to bed. It is so quiet that we never have our sleep disturbed.

Bought our GE Microwave (DVM1850DMWW) from Home Depot about 5-6 years ago. I can see a unit just failing; but to start burning, smoking and smelling is non-excusable. We were lucky enough to be in the kitchen at the time and catch the problem before it escalated. While the unit was just ok while it worked, potentially burning down our kitchen is inexcusable regardless of age. Time for a range hood and a small countertop model. A non-GE model.

Purchased an entire kitchen suite of GE appliances. Almost instantly the fridge started making loud noises which the repairman told me was normal. LOUD AND OBNOXIOUS. I wear earplugs in my house to avoid the noise! Secondly, the dishwasher started leaking and the warranty company is refusing to honor the warranty so Ive been hand washing dishes since August! They also refuse to refund the extended warranty fee. Currently filing a protest with consumer fraud. STAY AWAY FROM GE, isnt that a shame! THEIR PRODUCTS ARE JUNK!

My GE microwave oven died after 4 years. And my GE washer died after 5 years. Never ever buy a GE appliance. The market agrees, because their quality issues might be the reason the company has not been able to sell their appliance division for several years now.

For the amt. of money I paid for this microwave, you would think it would outlast the house. I bought it 3 yrs ago. The touchpad covering started to get warped right off the bat, and the handle was always steaming hot when you used the stove top (also GE). The other day, while using the stove top, I happened to look at the microwave, and it had no power. I checked the breaker, it was fine. I happened to notice a crack on the touch pad. After further investigation, I noticed the entire touchpad is shattered. It was clearly from the heat given off from the stove top. And I wasnt even using the microwave at the time. I sent GE an email, didnt even get an auto response. I am going to call them, but we all know what they are going to say, and I am not paying $482 for the part. Was hoping there was a recall, since so many people on the net complain about the touchpad.

GE Microwave was making intermittent buzzing noise 1 month after purchase. Called GE & they said they could send a tech out to check it but if they didnt find anything I would be charged a service call. I stated it would only do it once in a while so was concerned it wouldnt do it when tech was here & I would be charged so I passed on the tech. Microwave continued to make noise periodically but seemed to get less as time went on. 1 year & 10 months later it started to sound like it was arcing & shut off. Again it was periodic. Called GE. They sent a tech out & it only shut off but no arcing sound or intermittent starting & stopping. Tech stated it probably was door micro switch, but when GE called me back they said he stated it probably was circuit board. Whatever the cause it is still what I would call arcing & going off & on.GE stated They could give me a discount on a new microwave which amounted to cost of $100.00 more than I paid for it in the first place.

Bought a new GE over the range microwave in April 2021 and it broke/stopped heating July. They replaced the magnetron in September and its broken again a month later. Same issue and parts are out 2-3 months.

Have been using dishwasher (PDWT380VOOSS) since May 2013. Dishes do not come clean and I rewash by hand... have followed all suggestions by consumer relations, service technician and manual…cant afford to replace appliance…GE willing to replace at an aggressive discount because the appliance is working as it was designed to…disappointed in performance of a profile appliance.

Very convenient. Easy to use. Take some time to clean though, have to cover all food for splatter of food on the topside inside of microwave, have scour off with strong pad. Also it is not radiation free for health. But the microwave is easy to lift. The best thing about it you can cook frozen foods. Like meatloaf, beef stew my favorite, pizza, chicken.

We recently purchased three GE Profile stainless steel appliances for our new home. The total was somewhere around $3500. Within two weeks our $1000 dishwasher would not work. It took FOUR service calls and THREE weeks for it to finally be repaired. Now our $2000 oven (traditional/convection) has stopped working and the oven light will not go off without us tripping the breaker. Service tech not available for 5 days. I am expecting the new micro to go out any day now. All of these appliances are less than two months old. We had GE builder grade appliances in our previous home that are still running strong after 16 years. That is the reason we went with GE again. However, after the above mentioned issues with our new GE appliances, I encourage anybody who reads this to NEVER, EVER BUY ANY GE PRODUCTS AGAIN.

Bought model DDT575SMFES less than a month ago (along with a new microwave, stove and fridge) from the Home Depot. When the appliances were delivered the stove had some flaws in it so it had to be replaced. The dishwasher is a whole other story. It worked fine for a week but now it takes forever to get it to turn on. We try and try but it just beeps and the light flashes. Once we do get it turned on to stops before completing the cycle. If it does run a full cycle the soap dispenser does not dispense the soap. I wish I would have looked at this site before purchasing these GE appliances. Total junk and will NEVER buy anything GE again if I can help it. No responses back from GE and from what I read dont expect much from them. Now we will not be able to match the Slate with another brand and are stuck here.

I purchased this dishwasher 2 months ago and am VERY disappointed with its performance. For an appliance that claims energy efficiency it is a total failure. My last dishwasher was a Kenmore that I had for 15 years. It outperformed this thing in every aspect. Since purchasing this dishwasher my water bill has gone up and my energy consumption has gone up. Why? Because I cannot put plates close together in this energy hog or they will not get clean. I have to do twice as many washings as I used to for the same results. This piece of junk has NO WASH PRESSURE! All the dishes must be pre-washed in the sink to assure satisfactory results AND I must use the hot water boost or they will not get clean. Energy wasted doing a pre-clean and energy wasted with hot water boost - bad combination! This product is taking me backwards in savings and environmental damage.

We purchased a new home with a GE Profile dishwasher installed. Since the day we had it, we have never been satisfied with the cleanliness of the dishes. They frequently come out covered in food and must be rewashed. We now routinely prewash everything in the sink and we always use the cookware setting to wash everything. Despite this, we still have to re-run loads because they are not clean.I am convinced that there is a design error with our dishwasher, because the top dish shelf obstructs the door of the soap compartment and prevents it from fully opening. After a load has run, you can still see leftover soap dried and crusted in the soap container. If the dishwasher cannot even wash the soap out of the soap compartment, no wonder our dishes are not clean.

Purchased the cafe dishwasher in March. We are now on our second one as the first did not work and now this one does not work. It worked fine for the first couple of months and now it’s doing the same thing as the first one. Pump is on the fritz apparently. Truly disappointed. We owned the cafe dishwasher at our last house and loved it so we made sure that we purchased the same one when we bought our new house.

I have a over the stove microwave. I went to pull out the filter to clean, and one came out no problem. The second one fell apart. I got online today to replace $38 plus $6 S&H for one!!! It was the first time I took it out. I called GE told them I thought it was B.S. They said, No problem, we will give you 15% off and free shipping. Only problem was they wanted $47. I have 3 GE appliances. When its time to replace I will NOT be buying GE.

I wish I could rate this dishwasher ZERO stars. I bought my first GE cafe series approximately 6 months ago and after the first week, there were three separate, unrelated problems. I called GE repair and the serviceman came out and said he fixed all the problems. He did not. I contacted the store where I bought it, and after contacted GE directly was able to get a brand new one. After two months, problems started again. Once again the repairman came out. Long story short - 2 months, and three sick days later (on my part) dishwasher is still not cleaning dishes thoroughly. I contacted GE several more times and they sent me some dishwasher cleaner and offered me a discount on a new GE dishwasher.... I will never purchase another GE anything and advise everyone else to do the same!

The GE over-the-range, model JVM316URFSS was installed in our new home by the builder. We have been in the house and used the microwave moderately for the past two years. Last night, out of nowhere, the microwave started running. I realized that it was actually heating when the glass turntable popped. I jumped up and opened the door to stop the heating. The turntable was broken. The interior was incredibly hot. Having read several reviews I realize that this is not an uncommon problem. I am going to buy a replacement but I am very concerned by the fact that GE is aware of this recallable situation and continue to allow this product to remain on the market. I will NOT purchase another GE because apparently they do not care. Our house could have burned down had we not be home.

First of all, I wish I had seen this site over two years ago and I wouldnt have purchased a GE product. But, that is spilled milk. My two year old microwave, GE 1750 over the range, started running on its own. I disconnected it and called GE and asked if they had experienced any problems with their product and if this was a fire hazard, the nice young lady put me on hold and did research and stated that no reports of a fire hazard or running on its own. My husband encouraged me to do my own research and guess what? shocking, I was lied to! There are reported fires on the news and a law firm has a class action lawsuit against GE! I guess because this appliance wasnt in the nice young ladys moms house it wasnt of importance to inform me of the fire hazard? GE is off of my list of products I would buy!

Cost of washer $749.95 plus 4-yr warranty, install and hoses, $273 equals $1,023 for this GE stainless interior tall tub dishwasher GLD8700N20BB that only lasted 6 years and 4 months. It wont run, wont fill with water, nothing. Six years. Time to buy again. My advice, buy a cheap one and replace it every 36 months and forget the extended warranty. Installed: Sept. 2009. Dead: Jan. 2016. This was a replacement to an LG dishwasher that completely flooded my kitchen and caused a total tear out of my kitchen, and my homeowners insurance took LG to court. That LG cost $42,000 for a new kitchen and months of contractors and work. Washing dishes by hand is looking better every day... Think about it.

I owned this microwave for the last 5 years. Easy to installed, good appearance, stainless steel, easy to operate but fancy enough to prepare different meals to include the younger ones. Lighting very good and vent excellent.

My GE dishwasher is 30 years old and has never had a service call. It has a built-in food grinder and my dishes almost always come out spotless. Standard size, upper rack, removable utensil basket. Almond with a dark faux instrument panel with rotary dial. It was a builders model. Works like a charm but very noisy. Even though Im a small family Ive tried to use it consistently to keep the seals lubricated. It has stayed really clean inside with just using the dishwasher detergent. Unit does have some kind of preheat Electrical for the dish water temperature. The new ones dont work so well so Im afraid to replace it.

We bought a new GE microwave oven in 2007. It failed in 2018 after much, much use. We replaced it with a Whirlpool which failed in one week. Lowe’s let us return it and we bought another GE like our original and we are very happy with it.

I called the toll free number because of the concern I am having with your microwave, the paint is coming off the inside. So my concern is first why would it be coming off, is it a defect in the product or does it just happen? The person was helpful and seemed as if it was to be concerning. WELL IT IS to me. Could it make us sick, do I need to put it in the trash or what? Thanks for not helping me and not being concerned, but I am sure if it was you or family you would have had a different story to tell.

After my previous GE Microwave had paint peeling, I was offered a new one at a discounted price. The new one will not make popcorn. It does heat water, but a small bag of popcorn takes 4-1/2 minutes for 1/2 bag. I called and they sent a repairman. He made a bag of popcorn, told us to use a different setting. Tried that and it still didnt work. Then he heated a half cup of water and declared it works fine. It does heat. It just wont make popcorn. He said they changed the design due to people starting fires making microwave popcorn, but that could just be a easy lie. Said There is nothing we can do about it. Just dont make popcorn, eat chips instead. What???

Nothing happened...never has. It just wont wash dishes. I have to prewash every item that is put into this piece of garbage. I bought it new and have used it for 3 years. It remained in the box the first 5 years I owned it and it honestly did me as much good in the box as it has since we installed it. It makes a good rinser but wont even wash off a lemon seed left in the bottom of a glass. This is such a joke. I would never buy another GE product. The refrigerator I bought at the same time, a side-by-side, the entire front door froze solid within 2 years and we had to buy a new one. Your company stinks. This is a rip off of my money. Refrigerators and dishwashers are not cheap. Model GSDL122F02BB is the dishwasher.

Purchased new from Lowes. Dishwasher leaked starting less than a month after purchase. I have had it serviced 3 times since purchase and have another appointment scheduled. (It takes 2-4 weeks to get a tech out to your house). Currently they say he is going to come by on Tues and check to see which part to order next and then they will come back and work on the dishwasher when the part comes in. (Of course the dishwasher is leaking as I wait). They give a 8-5 service window so I will just have to sit here and wait on him to come by and decide what to order. This is pathetic. When you buy a new GE appliance you need to be aware that they literally do not have any program for replacing flawed appliances.

A few years ago, I purchased a brand new GE microwave oven. A week ago the microwave oven stopped working. I contacted an Appliance Repair company for repair. When the tech came & disassembled the microwave oven, he discovered pliers inside the oven. We took pictures of it (BTW, it wasnt the cause of the problem). I contacted GE to alert them of this & they told me that the robots that assembled the microwave oven probably dropped it in there. Then they said they will send a tech to my residence to investigate. I told them that the pliers was removed & the microwave oven is fixed & assembled. Nonetheless they sent a tech anyway. I told the tech what his Customer Service said & he said he wasnt surprised about the tool being inside an appliance from GE & GEs response. In summary, I would not recommend purchasing any GE products. They proved their products are a safety hazard & they dont care about the consumer nor their safety. All they care about is taking your $$$.

I have had 2 of GE microwaves, above the range models. Both the same model, but different years. One stainless finish and one almond. They are almost exactly the same. They are efficient, and I like the carousel for even cooking. But I would like it if the light bulbs under unit were easier to replace.

We purchased a GE dishwasher model GDF 510 in December 2012. We have had three service calls with a fourth one recommended. The first complaint was that dishes were not dry at the end of the cycle. After service calls to replace a faulty heater and install two computer upgrades, the silverware still is not dry. Finally after about 45 minutes into the cycle, it leaks onto the floor. GEs answer is to send another service technician. No thank you! They can have their dishwasher back.

4th service call for a piece of ** over the range microwave that keeps breaking. The service is a joke too. The sent some moron to come take a look at the microwave after I placed this latest service call. He came and without diagnosing, he ordered a few parts and scheduled a follow-up for today. He called this morning to reconfirm the appointment (which was already confirmed 2 times previously and this reconfirmation has never taken place previously) and I missed his call. When I called him back short whIle later, his voicemail directed me to call the 800 #. After a 35 min hold with them, they said since I didnt pick up the phone in the morning, the appointment was canceled. What???? It states nowhere that theyll call you to reconfirm an ALREADY SCHEDULED AND CONFIRMED appointment and that if you miss the call, they cancel the appointment. Next service call is a week from now, which makes it 3 weeks without a microwave. I hope they rot in hell.

Purchased an entire line of GE appliances for kitchen after having prior (still working) appliances for 13 years. Have had at least 5 services calls and countless emails and phone calls for non functioning Dishwasher. Here is response from GE Manager: I have reviewed the pictures and no I would re-wash those 4 dishes if they came out of my dishwasher prior to using them with my family. Dried on fruit, starches and dairy are tough for any dishwasher to take off as the sugars in them act like glue. Again for these types of foods we would highly recommend more pre-washing to make sure that they are not left on the dishes after the dishwashing cycle. CAUTION: DO NOT BUY.

I bought this dishwasher GLDT690TBB-00 on 05/12. Its not even 2 yrs old. I had some minor complaints about how hard it was to fit bowls, how the utensil rack wasnt easily accessible, how long the cycles took, how it had to be vented right after a cycle to keep clean dishes from smelling musty... But I was willing to put up with that. I spent about $700 new. The dishes did come out clean, if I stacked them properly. I only used it when full, about 2x/week, as I am an aging widow & live alone. It stopped functioning a few days ago. Control panel lit up, a little water came in, but no action with spray, etc. Called a local repair company today. They say the control panel is shorted out, and that in turn burned out the motor. The repair cost would have been $524.61. REALLY? Not doing that! Very disgusted. Ill never buy GE again. Last KitchenAid lasted 12 yrs, but as all the repair guys say: They dont make em like they used to! Too many bells & whistles. All I require is clean dishes, and for the appliance to do its job.

The GE dishwasher (model number GLD9312P02SS) I bought about 3 years ago is not cleaning properly because the screening that keeps the bits of food out is disintegrated, and apparently, the part to fix it would cost over $300.00. I will never buy another GE product again.

We moved in a newly built home and resided in this home for three years. The house came equipped with a GE Microwave: Model: JNM1541DM5BB, Serial: ZZ 201867 L. While in the house the microwave came on by itself with flames coming from the center of the unit. The plastic in the center of the unit was on fire. Had I not been home at the time this took place, I would not have a home to live in today. A review of the construction of this product is needed. An investigation to the cause of this mishap is needed.

I am writing this more as an educational notice for consumers of the G.E./Rheem gas water heaters to aid in uninterrupted service and understanding of the water heater. Installation locations: If you have installed your unit outside, all though in the owner’s manual, it states that G.E./Rheem says to never install the unit outside. People that live in warm climates do have their unit installed as such, but in a metal enclosure, of which to the city codes are fine, but again not by the G.E./Rheem standards. So being as this is accepted by city codes, people do and will continue to install water heater outside in enclosures.

GE has agreed to replace and install my microwave. I am very satisfied that they understood my concern in this situation and agreed to my request.