I just moved into a senior Community and the GE Dishwasher was already here. I moved from a condo that also came with a dishwasher, a GE, new. It was builder grade and I hated it. But I am really enjoying my GE in my apartment! This one cleans very well and is quiet. I like it a lot.

The microwave has done its job for the last 15 years and is still going strong. It isnt perfect, but it serves me well. The microwave is fine, but I am no longer a fan of GE products. The design of their stove makes it difficult to clean. I had to pick their dishwasher because it was the only one with the right dimensions. It does a terrible job cleaning the dishes.

I have a GE microwave manufactured Nov. 2013, model #JES1456DS1WW, Serial # VA201954 L. I purchased it at Home Depot. I have had it about 2 years. Suddenly it started flashing PF. I unplugged and plugged, and reset the clock several times, but it continued to do this, about 2 days, then just stopped working at all. The GE website listed on the product proclaimed GE Cares; I couldnt seem to find anyone who did despite numerous calls. The only question I had was if happened to be any troubleshooting re my problem--I dont think they cared...

In 2008 I redid the entire kitchen and purchased all GE Profile stainless steel appliances thinking I was purchasing quality items. Well, it didnt take long before the dishwasher broke but it was fixed for free by GE under a recall. However, now the refrigerator has begun to leak under the right corner of the ice/water dispenser located on exterior of freezer door and the microwave touchpad has also failed as I need to press below the actual keys for it to work half the time. When I spoke with GE customer service they basically told me there was nothing they could do with the refrigerator, I would have to call a repairman and have it looked at or pay their $100 diagnosis fee.The microwave they told me had issues with that particular touchpad and had it broken within first 5 years they would have repaired it for free under their recall program. But since its 7 1/2 years old I would have to buy the touchpad which normally only lasts for 6 months to 1 year or buy a new GE microwave and they would offer a rebate. Im so unhappy with their customer service and poor reliability of their products that Ive passed on each offer as I dont want to contribute another penny to a company that in my opinion is unethical and has horrible reliability. 3 out of 4 of my fancy GE Profile stainless appliances have broken! Thats a 75% failure rate! No thanks, Ill buy elsewhere. No wonder they cant sell their appliance business and why the stock hasnt moved in years... Wake Up GE, do whats right for your customers!

I bought a GE dishwasher that has a plastic tub. The tub smells. I asked GE to replace it, they wont because they say it operates correctly. I cannot imagine why any manufacturer would use a product in a dishwasher that STINKS. The plastic even has a warning for California consumers, that its a cancer-causing substance. Im glad I dont live in California, so it will never cause cancer here....

We have had this microwave GE JVM1631wb007 (2003) for a number of years installed above our stove. It was given to us by my husbands son so we did not have it registered with GE as owning it. However, I just sent an email to GE today asking for help as I find absolutely nothing on the internet about a scorched outside microwave door. We have had no issues with it whatsoever - until now. When we returned home from a one week vacation this past Sunday evening, we came home to a scorched OUTSIDE door on this microwave! The inside is fine. The two people who came into the house while we were gone said they did not use it but it is DEFINITELY scorched around the entire area on the outside around the screen area. I refuse to use it although my husband (who is an appliance repairman but does NOT work on microwaves) says its fine to use. Its not only hideous, it LOOKS unsafe to use. Im scared its going to catch on fire but my husband says dont worry and go ahead and use it! Im attaching a pic of it... Anyone else heard of this? Its not like we dont have the money to replace it. Im NOT going to touch the thing... You cant tell him anything. He thinks its fine. I need PROOF that this is dangerous to convince him... Please help before the house burns down!

I bought GE Microwave JES1139BL03 in 2011 and the white paint inside has been peeling off. I think it is defective because I have had other brands and none of them have done this. This microwave was manufactured February 2011.

I brought our brand new home just over 1 year and 8 months ago with all new GE appliances. One of the GE Smart Built-In Double Wall Ovens, the bottom one which we never use, but the inner glass shattered randomly, very dangerous and they want us to pay them $100 for the inspector visit and then more for the par and service $325 for the replacement, the GE is disagreeing they had a defect on installations. That is an experience that we never repurchase GE brands, my friend had the same issue. They replaced in their house this way without warranty, however they disagreeing our oven had the defect on installation, lesson learned, never never buy the GE again!

Dishwasher is 3 months old and today is the first time it has worked! GE has sent repair techs 3 times and finally today the unit was temporarily repaired with electrical tape attached to the brand new door latch. The door latch is cheap plastic and has a manufacturer design defect of being too small to properly engage the unit when the door closes, thus not allowing the cycles to start just a series of beeps. No other manufacturer uses a cheap plastic door latch designed like this but GE! Piece of crap, dont buy it!

About two years ago I moved into my condo and as a housewarming gift my sister gave me money to buy a microwave oven. I bought a GE over the range microwave. Well it quit over two months ago - really disappointed. I bought the next one but now after reading all these similar experiences I am sorry I bought the same problem.

The protective lining inside the microwave is coming off in a number of areas and the metal is visible and rusted. Is it hazardous to use the oven which is otherwise working? I contacted the Consumer relations department of GE and was told that its not repairable and offered only $25 as rebate to buy another one from them or any other retail store. I visited a couple of merchants, online and in their store, shopping for a similar product and got a price range between $250-450 plus $110 installation fee for a similar OTC microwave oven. We have all other appliances at home from GE and this does not give a good confidence about the products from GE.

I recently had a service tech out to repair my dishwasher. Before I knew it, he was opening the unit and found a tube looking piece stuck in the unit. He was at my house for 15 minutes and the bill was over $250. He should have asked if I was okay with the procedure he was going to perform and the cost before proceeding. To make matters worse, the dishwasher is not cleaning dishes now. I sent a prior email to GE a couple of weeks ago with no response. I would have never spent this money if I had been given the option and certainly now I have been charged for a repair that actually made my unit worse than before since it is not cleaning the dishes like it did before the repair. I respectfully requested that my money be refunded and/or be given a credit towards the purchase of a GE appliance and have received no response. I tried calling and have been on hold for over 30 minutes now with no one picking up, despite the fact that hold time stated estimated wait time was 5 minutes.

Great microwave when the thermostats are working. Have gone through 4 in 2 years. I have convection/microwave. This is a great oven, and microwave. The failing parts should be something GE corrects. Service contract was purchased after 2nd needed repair. Their contracted service was awful. No communication, mis-scheduling, unavailable parts, Poor customer service. Have officially requested with GE not to have this contractor assigned to correct any problems in the future.

I purchased a GE Profile™ 2.1 Cu. Ft. Over-The-Range Sensor Microwave Oven and paid over $500. I have had it 3 years and in the first 6 months it broke. It was under warranty and the $400 fee (door replacement) was covered. Then it broke 1 1/2 years later and I received a quote for $200 in labor plus the cost of parts (no longer under warranty). When the repaid guy walked in the house he said, Oh, one of these. Is it the door? I said no, we already had the door replaced, but his comment was very telling that I purchased garbage. I fixed it myself for $10 - it was a fuse. Then it broke 2 weeks later and I believe it is the fuse again. I contacted GE because I believe I received a lemon and they are willing to give me parts at 50% and nothing more. This was the worst investment decision I ever made and I caution others to not purchase this microwave.

Nothing happened...never has. It just wont wash dishes. I have to prewash every item that is put into this piece of garbage. I bought it new and have used it for 3 years. It remained in the box the first 5 years I owned it and it honestly did me as much good in the box as it has since we installed it. It makes a good rinser but wont even wash off a lemon seed left in the bottom of a glass. This is such a joke. I would never buy another GE product. The refrigerator I bought at the same time, a side-by-side, the entire front door froze solid within 2 years and we had to buy a new one. Your company stinks. This is a rip off of my money. Refrigerators and dishwashers are not cheap. Model GSDL122F02BB is the dishwasher.

A recall on a dishwasher: The heating element was replaced due to the fact they said it could catch fire. The bottom of the dishwasher is plastic. They replaced the heating element with the same kind of element that was there. How could that be any safer if the bottom is still plastic? I have children in the house; I feel this is a dangerous situation. I am dissatisfied with GE. This is the third dishwasher with the same problem in a matter of 5 years.

I purchased a GE Profile stocks in 2007 and a GE microwave model JVM7195SK1SS purchased 12/30/16. We have replaced the knobs on the stove 2 times because of peeling in the past. Now we need to replace the microwave handle. The handles and knobs look like metal but they are cheaply made white plastic covered with a sharp silver coating that peels. It appears the knobs get overheated when the oven opens and the microwave handle from the steam when cooking on the stove. Last night I cut my hand on the handle! We reordered the faulty handle and now getting charge $100 from GE. The company should take responsibility for their poor design and replace it for free with a nonpeeling part. I know that we will get the same handle and won’t be able to use the burner below or hope that using the fan will keep it from cracking again. I would never recommend a GE product again.

Dishwasher lasted just little over a year when it broke down first time. Power switch made out soft plastic jammed up. Next cheaply made door close switch cracked. Part prices are average price. Because poor quality, I predict replacing this within 3-5 years.

Touchpad for CVM2072SM2SS stopped working. This touchpad has been creating issues for the last couple of years. Few reconnection of wires got it working for the last few times and now it is completely broke. GE is not ready to help with fixing the issue. It wants to sell me another microwave CVM1750SHSS which seems to have similar issues (also the plastic handle for those microwaves seems to fall apart due to heat). In fact, the reviews for the whole range of GE Cafe series seems to be pretty bad. GE is not owning up the design issues. Too bad!

GE had recalls on models 8500 and 8700 due to the motor catching fire but not my 8600 which is right in between. So besides it being the worst working dishwasher weve owned by not even cleaning well, the unit catches fire and almost burns my house down and GE wants to give me a credit toward buying another fire trap as opposed to replacing it because its 5 years old. I expect appliances to last more than 5 years and not catch on fire. No more GEs for me!

This is a very nice brand of microwaves. Has easy touch from 30 sec to 10 mins. Meaning you touch start for the 30 sec and press 1 for one min - just hit start after. The only bad thing is the plastic coating over the buttons is starting to rip. Not a big deal just doesn’t look as nice.

We bought a GE dishwasher a little over 3 years ago. In the last week of September we awoke to the smell of hot or melted plastic. We found the source to be the dishwasher. I had loaded and started it before going to bed the night before. The counter-top above the dishwasher was stove top hot and upon opening the dishwasher found that a cutting board that we have had for many years and have always put in the dishwasher had melted on top of the heating coil. Dishwasher safe items on the top rack melted as well. It had been drying for at least 9 hours. After pulling the dishwasher out we saw the heat shield had melted and was crumbling. We contacted GE, sent them all the pictures and they told us it was not a safety issue. We have no doubt that if we had not woken up so early we would have had a fire in our house caused by the dishwasher.

PVM1870SMC ($580 plus tax/Cost CDN). I bought all new GE Profile units in mid 2010 for my new house. I spent $7000, plus tax, for 4 items from a reputable company in Hannon Ontario. I bought a Fridge, Dual fuel range, Dishwasher and last the Microwave, model stated above.About 6 months back it started acting funny, but thought not too much of it as it was very intermittent. Today the Microwave will NOT seem to shut off after it beeps from cooking/warming up food and the door is open then closed. I close the door and it starts to hums. If food is in it, you can see it is still cooking. I open the door, and then close it again and it starts to Humming as soon as the door closes.The glass tray does not turn, nor does the light go on (when humming) as it does when you actually push the start button. If you do start it, everything works, that is the table turns, light goes on and it cooks/warms food etc. Then it beeps when done, you open the door to remove items, close the door, and again just starts humming.I unplug it for an hour, but as soon as you plug back in, again.. Hums until you open the door. I put a cup of water in it, and just closed the door, did not push the start button. After about 40 seconds, the water started to boil.

Generally ok, but the entire wash cycles take way too long. Certainly much longer than the older models. I guess thats more or less the case with most dishwashers today. It makes me hesitant to use the dishwasher when I consider all the energy it takes to function. I would prefer having a setting for speedier rinse/wash of just a few dishes.

Bought the new dishwasher in Dec. 2013. In November 2014 a month shy of warranty expire, the detergent dispenser did not release or partially released the detergent. GE sent out A&E Factory service to fix. First visit initiated the parts order which was a new computer board and a Cascade Series detergent dispenser. A month later the second visit to install parts, the A&E tech was at our home for 3 hours and it took that long to remove and replace detergent dispenser. The tech did not replace computer board stating it was not needed? A week later the detergent dispenser still did not release the detergent! Called back to set up another appointment which was at the earliest Jan 19th 2015. Meanwhile last Friday Jan. 9th 2015 the dishwasher started to smoke heavily causing smoke detector to go off at 9 p.m. at night. Thank goodness!! We were home so that I could disconnect the power. Third visit was 1/12/15 and was informed by Lead A&E tech that the board should have been replaced and that the tech that was sent out was a trainee and inexperienced to work on my dishwasher. He should of never worked on my dishwasher(!!) according to the Lead A&E tech. The Lead A&E tech also stated that my model has had a problem with the computer boards which is essentially the brain of the dishwasher. I am currently taking my fight back to GE since A&E Factory is a subcontractor to GE and is not authorized to replace appliances. I told GE that I want a new dishwasher that is not using the problem computer boards even if it is an upgrade. It is not our fault that they have work with A&E who send out inexperienced techs to work on complicated GE appliances. We want a dishwasher that we both feel safe to run while we are not home. Is that too much to ask for?

This microwave is nearly 20 yrs old and is still working great. We replaced the handle but other than that it has been great. I would definitely recommend the GE brand as it has been very reliable. I give this product a great rating.

Not only does this dishwasher do a lousy job of cleaning dishes, I have just found out it allows dirt to collect under the door flange==lots of dirt! There isnt enough hot water to clean this out. Very gross--do not buy.

Very heavy to mount above a stove, not enough watts. The model I have is 900 watts, too many options for cooking different foods, not many parts are available to make a repair on any of the GE microwaves, I would not recommend purchasing a GE.

Bought a GE microwave and arranged to have it installed. Kept it in sealed box for 3 days until installer appointment. Opened box to find a crease (dent) in door. I phoned in to the GE warranty depot and they informed me that I only had 48 hours to report and as such was out of luck. They indicated that it is clearly stated in the Appliance Manual under the warranty section. Too bad that the Manual was in the sealed box. No warning on the outside of the box. On top of that the individual that I spoke to at the Warranty Depot was very rude. No more GE Appliances for me. Be forewarned.

We purchased this dishwasher for our rental. The last dishwasher was over 30 years old and still working but the racks were coming apart so we opted for a new one from Home Depot. A year later our tenants called saying when they used the dishwasher it rained in the basement. Our maintenance man called and said the dishwasher melted a hole in the right side about 1.5 inches by a 1/4 inch. Midway to the heater element. He did a temp fix with silicone.I called GE Recall number and was told it was not on a recall list. I called customer service and was told they would waive the service call. I explained this was a FIRE HAZARD. They insisted all they could do is send their tech out for repair. Since I paid about 280 dollars for the dishwasher I decide a service call would probably run near that and told them NO! I am now sending all information to consumer affairs department with my STATE REPRESENTATIVE. I also am putting the fire hazard info out there on facebook and twitter. I am waiting for someone else to say they also had a fire hazard. This should be on a recall list!

GLD6560L00SS. My dishwasher (Model number:GLD6560L00SS) was producing large amounts of smoke through the face panel. It filled my kitchen with smoke and produced a strong smell. I contacted GE and they sent a service repairman out and he took a look. He said this problem is very uncommon with this specific unit and he has never seen something like this. After he removed the front panel, we were welcomed by a burnt/charcoal black face-plate. There was an internal fire in the machine. To fast forward I have been working with GE the last 3 weeks and they have offered to cover 50% off a new unit. I cannot afford this even with a discount and they will not cover the cost of a replacement. This problem could have been much worse if I was not home. The house very well could have started on fire. We normally set the unit at night and go to bed... Thank god this was a different day. This kind of thing is unexceptionable and the fact that they will not cover.

GE over the range microwave JVM1540DP1WW - Within 1 year, the magnetron failed. I called the Sears service department to fix it. Because of that, I bought 2 more years of extended warranty. Three months after that, the microwave turned on by itself for 1 minute nonstop. I had to unplug it and call the service again. It would also turn on even when the door is open. Its very dangerous for microwave exposure!

I like my microwave. It works alright but the fan on it is extremely noisy. This is the first GE microwave that is so noisy. Besides that it defrost food well, I like the different functions on this microwave. They work great.

My ancient GE Profile Spacemaker II Sensor microwave, the successor to its predecessor, is consistent, great performance, reliable. I chose this model because I was happy with its performance. But it could be less chunky. I would like to remodel my compact kitchen, and a sleek newbie non-chunky GE Microwave Oven would be awesome!!! :)

I have a three-year-old over the stove microwave Model JWM1540DN1WW. The message Keypad shorted - Service may be needed appeared on the screen and no buttons are responding to any commands. I called GE and was told it would cost $89 plus parts and labor to have a technician come and look at it. The same message appeared two months ago and a few hours later, the microwave started working by itself after being unplugged a few times. This time, it is not working. I will buy a different brand rather than pay money to fix this one. Anyone had the same problem?

In 2008, after waiting 30 years, we remodeled our kitchen using both a GE Range & GE OTR Microwave, model # JVM1850. Last week, it started making a loud noise when started and wont heat. From reading online it sounds like the magnetron went. Everything else, fan, turntable, lights inside and outside work, but wont heat. I called in for service to find that it would cost $89.95 to have them come out to diagnose it. Also read that a magnatron is between $150 - $200, and used to be warranted for 5 yrs. New GE microwaves only carry a 1 year total warranty. So they know they are supplying junk to us. Had to just bite the bullet and replace it. People cant afford for appliances to only last this long, at the price they are charging. I am not only upset at having to spend another $450 only 6 1/2 years later to replace a microwave that was lightly used, but GE has chosen to change the look as well, so it no longer will match the range it sits above. When I was remodeling, I read so much about matching appliances... not matched anymore. Totally disgusted.

I have had the GE Profile for approximately 8 years with no Issues. I learn something new it will do every now and then I had no idea was possible. I stillHave not conquered the convection baking and that is my fault. I need to use it more often since it wouldn’t heat up kitchen like the range does especially these hot summer days in Texas.

We bought a GE cafe series microwave (model/serial number: pnm919sf1ss/gd235771b) and 4 months later it ceased to function. We just had a remodel and for the first time had an expensive, over the oven microwave and were very excited. Unfortunately, unlike the 2 cheap microwaves weve purchased in the last 36 years, this one we had used for 3 months total, developed problems. The motor seemed to surge and then it would go off. Half an hour later it came back on but would only work for about 5 minutes at a time. I called GE and they arranged for a local company to come take a look. They insisted on a 4 hour window and fortunately my husband is retired so he could be there. The repairman came and didnt have a clue as to what was wrong. He called his boss who talked him through diagnostics. After an hour he left, saying hed be back in a week with some new parts. Again we had to wait the 4 hour window. He came in and we were on pins and needles hoping he wouldnt scratch our cabinets as he took the unit down. He replaced the microwave component and when he left it worked. Two days later it again died. I called the repair people and they told me I had to call GE to get permission for another attempt at repair. I called GE and they said I had to call customer service to file a report. They told me I had to make an appointment for a technician to come out to see if the microwave could be repaired. Really??? The technician would try to repair it again or decide it couldnt be repaired and needed to be replaced. Like we have nothing better to do than wait for these repair people who have no clue as to how to repair the microwave. Every time they take down the microwave they risk ruining our cabinets. It was so unhelpful. I am really disappointed in GE customer service. We had to go out and buy a microwave to use while we were waiting for the repair. They obviously dont care that we cant use their expensive product. Our replacement microwave was $40 from Walmart and works beautifully. We finally complained to our WONDERFUL contractor who originally purchased the microwave for us and he is replacing it with a new one. He was appalled by GEs treatment. He takes note of appliances that are crap so he can warn customers. I thought I was buying from a reputable company and thinking we were getting a great and special product. Too bad.

We purchased our GE dishwasher in September 2014. In December 2014 the dishwasher started to make a loud grinding noise. I contacted GE and a repair man was sent promptly to do the repair. Upon arrival and looking at the dishwasher he advised me that it was the motor. He then stated that he would order the parts and also stated that he did not have the correct tool to remove the motor and has not had one since they have changed the manufacturing process. At this time I am still waiting for the parts and I have contacted GE numerous times to find that the parts were either on back order or had been shipped out. I am still waiting for the parts and the repairs to be done. The estimated date of the parts to arrive is January 29th. At that time I will have been without a dishwasher for a month that I have just purchased.

Our builder installed our GE microwave Model: JVM7195SF1SS as part of our kitchen appliances. It worked fine for about 3 1/2 years. Then it stopped heating. It turns on and appears to work, but after inserting a cup of cold water and running it on high 10 minutes, we remove cold water. I looked into this and found that the magnetron (spelling?) tends to fail. Apparently, its a known issue, based on the reviews. GE wont allow consumers to replace this and doesnt provide replacement parts. Getting it professionally repaired will cost more than the microwave is worth. GE sent me a certificate for $150 to replace it, but it will cost at least twice that to purchase a new unit and get it installed. Plus, we have to buy another GE. I dont want to end up in the same situation. So we didnt use the certificate.

Our brand new GE Profile dishwasher wasnt cleaning dishes (even after rinsing them before stacking them in the dishwasher). GE technician came several times and lectured me how I need to open hot water faucet before turning on the dishwasher, about how I should stack the dishes in the dishwasher, etc... all bogus talk. Our builder was kind enough to replace the dishwasher because he saw how frustrating it was to deal with GE service. The new GE Profile (i.e. replaced by builder) works without opening hot water faucet, or washing the dishes or stacking them in any particular manner. In summary, I wouldnt recommend GE Products because GE service is HORRIBLE and their products arent that great. I have GE Profile all over my kitchen. Within the first year, my microwave, dishwasher and built-in fridge broke down!!!

I purchased a new GE over the oven microwave to replace a 10-year old Spacemaker unit. After three weeks of use with no issues, the unit overheated excessively during a normal use. The heat was so intense that the pegs that hold the racks melted causing a severe burn on my sons thumb. I unplugged the unit fearing further injuries and/or fire. Are GE products manufactured poorly or did I get a lemon? Who knows? Anyone else have a similar issue? I am still waiting for GE to respond.

I know this commonplace complaint, like thousands before me, will head straight into the wind because the world just works in this way: technical support and repairs works as a profit center for a corporation. My GE Profile microwave abruptly failed out of warranty after years of use. The cause was due to a wire burning up inside that had not been loosely connected, said the GE technician, so this was an issue of inadequate quality--not bad enough to cause the microwave to fail quickly but enough to cause failure over time.After taking the microwave out of the built-in cabinet, it only took the technician about 5-8 seconds to find and diagnose the problem, several minutes to get the right part (a wire) from the truck, and a couple of minutes to fix it. The labor charge was $121 for about 7 minutes of repair work, to be liberal with time. (This charge is separate from the charge to come to our home and diagnose the problem.) This prorates to over $1,000/hour for a basic wiring change, which I think is exorbitant. I understand that the technician is a highly trained individual, but this is already reflected in the high labor rate.According to GE, the cost to replace the built-in microwave, which came with a matching stainless steel frame would be $550 if we wanted the new microwave to match the frame at least (but not necessarily the oven, stove, etc.). This is the kind of cost you dont think about when you buy a new home built with matching appliances--well, I didnt. Companies like GE can rationalize all they want about all the overhead associated with servicing a repair call. I can certainly grant them some leeway, but in the end, charging an extra 8 times more an already high labor rate given the time needed to fix the problem is simply price gouging a consumer who has no good recourse. (This is why I pretty much avoid repairing anything, except for my car. Its almost never worth it.)I recently had an experience with an experienced plumber charging an hourly rate of $150, prorated by and rounded up to half-hour increments of work, regardless of difficulty of work. Repairing an appliance should work the same way, and my GE bill would have been halved. Because of such profiteering, I will not consider purchasing a GE appliance in the future. I pray that this microwave doesnt break down again in the coming years due to some other problem. It would be a lot less expensive to just buy a non-matching portable microwave then for $100-$150 than to keep up appearances.To be fair, the woman who fielded my service call was courteous and empathetic. Because the microwave apparently had an electrical burning problem, she previously waived the diagnosis fee. Otherwise, my simple repair would have run several hundred dollars, more than the cost of the microwave. However, she was unwilling to reduce the labor charge, so based on how strongly I felt ripped off, I give GE a star rating overall.

I just found the site for the review on 5/17. Ive had two GE Cafe microwaves model CVM2072SM3SS purchased at the same time for the two kitchens in the house. The microwave in the in-law suite lasted one year and I replaced it with a very economical one which has been fine for 3 years. The electrician could not repair it. The microwave in the main kitchen is 5 years old but it stopped working (same issue of frozen panel) after 4 years. In Nov. 2016, during Thanksgiving weekend, it froze and stopped working. I looked on YouTube and we cleaned the terminals in the panel using alcohol. That worked for 2 months. When it stopped again I tried the same remedy but it did not work. The panel lights up, but it will not respond to any commands. After 7 months of it being inoperable, I decided to either fix or replace it (while using a way cheaper GE from a friend).This is an abysmally poorly engineered VERY expensive microwave. The LED panel is a disgrace! Do not buy CAFE microwaves. Im out $1500+ (for two) plus the replacements, the aggravation, the ugly looking counter with the loaner from my friend. I am ready to bite the bullet and buy a microwave that fits the style of my kitchen. It wont be a CAFE! Although it is a set... Enough is enough. I give up.

I love GE's washing machines front loader and it's excellent. I've never had to have them come out and four years to fix anything on it. Cleans very well and washes the clothes outstanding and it cleans up very easily when you clean it through the cycle that comes with the machine. It's relatively easy to understand as far as the button setup on there. I also liked that you get the echo warm in the Echo cold features along with the regular warm and cold. I did purchase the block that the time that I got it which helped out a lot is I'm 5 foot 10 and it's the perfect height. It helps getting stains out really easy as I have a nice here to play softball. I would definitely recommend this washer to anybody and everybody. I even wash my huge comforter for my bed in it and it washes it great every time.

The little trap door which releases soap stopped opening when the GE top-of-the-line Profile dishwasher was one week past its warranty. Because of the design, all kinds of crud collects under the hinged door, meaning there is ALWAYS an odor unless we get down, hands and knees, to scrub it out. Features are fine -- as long as they work. Having a dishwasher that doesnt even dispense soap and cleanser isnt worth much, limiting us to the automatic feed with shine liquid. Stainless steel outside is impossible to keep clean. There are streaks and blotches within minutes of polishing with Sheela Shine. Suspect it has something to do with the humidity where we live, but it shouldnt happen. I find it strange that GE is perpetually sending me warranty extension offers for my refrigerator (which never fails), but nary an offer for the dishwasher or microwave/convection oven in the Profile line which have each needed repairs twice in the three years since purchase.

GE Stainless Steel Profile Dishwasher - My dishwasher is about 5 years old. Two years ago, we noticed that the gaskets, both around the tub and on the bottom of the door, were becoming gummy and rippling. We were hoping to make it another couple of years before buying a new dishwasher, but a couple of week ago, the top arm fell off because the gasket was so degraded. We ordered the appropriate parts and were only able to replace the top-arm gasket and the tub gasket. We had to call an authorized GE repairman, specifically RC Appliance in Sparks, NV. When he tried to get the gasket out, his hands turned black from the rubber. After about an hour of trying to get the new gasket installed, he had to use his pliers to crimp the gasket in place leaving large dents along the bottom edge of the door. He said the factory had crimped the old gasket in place at the factory from the other side. I am extremely unhappy about the workmanship and the fact that the gaskets did not last a reasonable time. I dont want to seek an attorney, but would rather GE contact me to discuss what must be done.

I have a GE microwave oven. The paint inside the door is peeling off and has been for quite some time but I never got around to calling them. I recently decided to purchase a new microwave and use my old one downstairs. I called GE to ask them about this problem as I didnt want to have this same issue with my new microwave. GE told me they would do nothing to help me fix the problem and I need to stop using it because it is a safety hazard. I told them the microwave still worked fine and if I need to stop using it, does GE offer any compensation for something that is obviously a defect. I was told, no, GE will do nothing. I told them Id even be happy with some touch up paint but the lady was so rude, she would just sit there and not say anything until Id ask, Are you still there? Granted my microwave is several years old but because of this door defect, Im being told basically I use it anymore even though it still works. I need to just throw it away. I have a new GE microwave on order but thanks to their horrible customer service will be cancelling that order and buying another brand. I also will not ever purchase another GE product. I told them this and they said, fine. Obviously they dont give a crap about their customers.

Bought the unit about 2 years ago. The interior paint started coming off after about 1 year and several months. At 2 years, the unit stopped working and is reporting a shorted keyboard. I have had other over-the-counter microwaves that lasted over 12 years and were replaced just due to old age and style. I have read about others with the exact same issues. Ill stay away from GE products big time after this display of poor reliability.

GE dishwasher GDT680SSH2SS - I don’t normally do product reviews... In this case, I am making an exception. This is without a doubt the very worst dishwasher I have EVER owned. I’m pleased with myself for buying the optional insurance when I bought the dishwasher from Home Depot. It has been repaired 6 times. It even had to have the main seal replaced. It flooded my kitchen and ruined my floor. My homeowners insurance sued GE. I think it worked fine for only 6 months...then it went downhill. It is extremely loud! It sounds like your dishes are being destroyed... No, I’m not exaggerating!I have NEVER had issues like this. I bought this GE as I really like the screen bottom so that large particles didn’t get caught up inside the pump etc... As I’m typing this, I have it set for Sani wash and the water isn’t hot at all, and it had standing clean water in the bottom when I opened it up this morning. I will also note, I rinse all my dishes before putting them in. I will never buy GE anything again.

Purchase a GE microwave Jes1142sp2ss on December 2014 from BrandsMart. The paint on the bottom of the microwave is peeling off exposing the metal. I have never ever heard of this happening on a microwave. I will never buy another GE product.

RCA RMW953-White 0.9 cu. feet Microwave, 900-watts, 10-power levels, end cooking signal, glass turntable, 6-one-touch cooking menus, speed and weight defrost, cook by weight. Bubbles obscure text. I wanted a white microwave with a door handle, .9 and fairly powerful. I was glad to have found this microwave. But I dont know if the hole was there before, or my teenagers or I inadvertently put a small hole in the plastic covering over the control panel outside the microwave (NOT meant to be removed, I asked support) but now its become a larger hole as air got underneath. I cannot read the button text. I tried to cover it with scotch tape and thats not working.I searched and found out this is a common problem with GE microwaves. The buttons are very close to the bottom and therefore, countertop, so if you have a utensil or plate or something that sits near the microwave, it might nick the plastic coating. I called GE support (in India) and they said since its under warranty, I can return it. However Id have to pay shipping costs. Fortunately, I bought this at Wal-Mart (I hate to support this store but it was the only place I could find this style) and they have an excellent return policy and there is no charge for shipping. It was easy to call and request a shipping label within the generous warranty period. You might save yourself the trouble of a return or be very careful to not put a small hole in the plastic coating. Again, this is not protective coating for shipping, this is a permanent coating to protect the buttons.

5 years ago I updated my complete kitchen with Adora LG appliances. To my dismay, the handle on the microwave (Model DVM1950SR1SS) began peeling like paper. Now I have a white plastic handle that’s supposed to be stainless steel as an eyesore in the middle of my kitchen. When I called GE replacement line, I was informed the handle was $164! My 5 year old kitchen is out of date! As far as I’m concerned this is a defective part and GE should replace it at no charge. I have been a faithful GE purchaser for many years. After this mishap, I will no longer recommend GE appliances or will I purchase them.

I moved in to a newly-built home in Nov. 2010. Shortly after, my GE Profile microwave seemingly caught fire. We called for service and were offered a repair free of charge. We declined a repair and did receive a brand new appliance of the same model. Around June 2012, the exact same fire happened to the new one. I must admit that it took me about 9 months to report the problem because my family had been devastated with a lengthy illness and passing of my mother. While going through our trial, I shut down my mothers apartment and just started to use her countertop microwave. Realizing that I needed to address the problem with my microwave, I called and explained this to GE service. I guess that the representative was just doing her job and stated the year warranty spiel and had no concern of this being my second microwave within a two and a half year span and also the length of time that it had not been working. I was immediately given the cost for a serviceman to come out plus I was told that I would have to pay for any parts. When I went to Home Depot to price the microwave; the cost for my model was $278. I therefore decided. Why bother to have a defected model repaired? Who needs the aggravation? I will just eat my loss and buy another microwave. Be assured that it will not be a GE. I will never again buy a General Electric product.

Has anyone experienced a plastic burning smell when the dishes are drying? My dishwasher is 3 years old and I wash on Light cycle which is suppose to be 45 minutes long but goes for 85 minutes. Company said to turn off circuit breaker and turn back on and it should be fine, it isnt. Last two times I used the dishwasher it wouldnt completely shut down so I had to do it manually and before I did this I could smell a plastic burning smell but there was nothing on the elements. I called for a service call but they were shut down for 4 days.

We renovated our kitchen with all new GE Profile appliances in 2017 before moving into our new house in 2018. Nov 1, 2018 our GE Profile stopped working and showed a leak message. We called GE who referred us to A&E Factory Service. The repairman arrived Nov 6 and proceeded to not be able to pulled the dishwasher out and tell me the list of things he wont do because of policy. Without inspecting the dishwasher but looking at his computer with the list of things that could be wrong, he said he ordered two parts and would return on Nov 23. Nov 23 came and no repairman. Calls were placed to GE Parts and Service who expressed their disappointment over the no show then proceeded to say that parts would not arrive before Nov 30 and that one of the parts was on back order. Once the parts came then another repair appt could be made. I will have been without a dishwasher for over a month with no alternative recourse. Service response and A&E Factory Service is less than poor.

I cook a lot of popcorn in my microwave and it hasnt burn a bag yet. It warms food quickly. Also, it cooks bacon really good. But the best feature is the steam cleaner that saves me time. It steams for about 2-3 minutes then all I do wipe the steam off and its clean.

I bought a 1.6 cu ft microwave at Christmas, microwave failed within a month (electric burning smell and microwave quit). Contacted GE to replace and was given a run around (told to buy first, send them the receipt, then they sent a check). Finally they replaced now - have the same issue with the new one. Never buy a GE appliance, I certainly will not!!

Purchased an entire kitchen suite of GE appliances. Almost instantly the fridge started making loud noises which the repairman told me was normal. LOUD AND OBNOXIOUS. I wear earplugs in my house to avoid the noise! Secondly, the dishwasher started leaking and the warranty company is refusing to honor the warranty so Ive been hand washing dishes since August! They also refuse to refund the extended warranty fee. Currently filing a protest with consumer fraud. STAY AWAY FROM GE, isnt that a shame! THEIR PRODUCTS ARE JUNK!

The WORST Customer Relations Department & GE Dishwasher EVER 1. Ordered dishwasher & Scheduled Delivery. 2. After my 4 hour window of waiting, I was called and informed the installation needed to be cancelled due to the installer calling in sick. 3. During installation, they dropped my dishwasher & dented the door. I rejected the dishwasher as my other one was already hauled out. 4. Due to my hectic work schedule, my dishwasher was installed about 2 weeks later. 5. Dishwasher was not cleaning. 6. Technician came out another week later and I was told it was MISSING parts from the manufacturing plant and should have never passed QC. In addition, It was missing the bottom spinner and the top spinner was snapped off. The technician glued it back on.7. Called Customer Relations to get the runaround saying, its not their fault it came from the manufacture missing parts.In closing, I own a large apartment complex and have many BUSINESS friends. I will NEVER buy a GE product EVER again and to think of all the people I know, Im going to share my horrid experience with everyone I know. This will make great conversation when golfing too.

I purchased a dishwasher and it doesnt dry the dishes. It leaves the dishwasher and the dishes wet. I was told they have a fix. However, nothing has been done. If you want wet dishes, dont buy. They told me to raise my water temperature on my hot water tank and to run my sink water until it goes hot. They told me to buy Rinse Aid. Well, I did it all and it still doesnt dry. This is an energy saver appliance. Ha, ha, its because they are saving energy at our expense.

GE Dishwaser Model # GDT580SMF2ES - My husband and I purchased an entire suite of GE Slate appliances in 2015 when we built our custom home. We purchased the refrigerator, glass-top range, range hood microwave, and dishwasher. We have experienced problems with the refrigerator Model # GFE28HMHCES twice. A horrible rumbling sound, which they came out and repaired promptly. However, more upsetting is the constant problems we have experienced with the dishwasher. The door gasket broke, which we were informed was not covered under warranty, and most recently the dishwasher stop cleaning and will no longer dry. We have done everything to rectify or repair the situation ourselves, and since it is no longer under warranty, we are left with an appliance that we either spend more money on to repair or toss and buy a new one. NEVER AGAIN WILL WE BUY GE!

GE Profile Microwave/Convection Oven JVM1790WK, over the range unit, CAUGHT ON FIRE while microwaving water for coffee. One of the four prongs that holds the oven grid in place started flaming wildly and smoking after about one minute of microwaving. My whole kitchen has an acrid awful burning smell. This is my second unit for a small kitchen, and I will be lost without this. The first one I had the handle fell off. This one is too dangerous to use. These units cost $600!!! I cannot afford to replace one every few years. Maybe this model and brand is bad news?

I had a new house build and it came with all GE appliances. The dishwasher Model GDT530PSD255 was not drying the dishes and the run time could be as much as 3 hours. The service man was there with in week. He said the dishwasher was working properly. After running through the cycles he said its working just fine. I open the door and it was all wet and the silverware tray and the silverware was wet and some soap was still on the door. He said everybody complains about the same thing. High efficiency Dishwasher have long run cycles and most dont dry to well. The silverware trays hold water because the tray sides are flat (horizontal) and that holds about a half of cup of water. All they have to do is put them on a 45 degree angle and the water will run off. Apparently it worked well on paper and no one actually ran it through its cycle. Needless to say I hate this dishwasher and its almost at the point to do them by hand. A lot of time is spent drying off dishes and silverware.

When I entered my home I notice the microwave door was open and light was on. I closed it and took packages to my room. When I entered the kitchen I seen flames coming from inside unit. I put out flames with a fire. The panel was off and microwave was empty. My son said he left the door open because when he closed it hummed. I am very blessed that my home or loss of life did not happen. I contacted GE to see if there was a recall and was offered a 20.00 discount. I really feel that this is a hazard waiting to happen.

I have been trying since April 4th to get my GE Profile dishwasher fixed. It is July 24th as I write this review. I have had two different technicians come out. It still does not work. After the 2nd technician came out I ran my dishwasher and at 2AM realized something was wrong because it was still running. I came into the kitchen to find my entire kitchen floor flooded in boiling hot water, ruining my cabinet baseboards. I have since had two service calls canceled at the end of the time designated and today I have no technician showing up. Customer no-service is saying technician tried to call me; I have recd no call and have no message left. I have taken multiple days off work to sit at home waiting, and waiting. And this is after two already came out. ABSOLUTELY AWFUL SERVICE.

We purchased a complete kitchen of Profile appliances. Everything is fine except dishwasher! The first one didnt clean food and left scum on everything... The company sent service several times replacing many parts.... finally gave us a new one... It still doesnt clean. It will not remove peanut butter, avocado, and my teacups are perpetually stained dark brown. My old dishwasher, Kenmore, left my dishes sparkling... no matter what was on them, plus I didnt have to run my kitchen sink to get hot water first! I will not use GE in my next house which will be built in about 3-4 years.

Bought a GE dishwasher that a service bulletin was generated by GE on a fault in their manufacturing. DD03-16 for reference. The door does not stay shut and continues to open. GE customer service suggested replacing hinges and brackets on the door. So I ordered the parts and changed them. It did not work. I called them back and they suggested purchasing and replacing additional parts. I called a local 3rd party and they provided the service bulletin and said that this is a problem in the design of these models. GE will not repair the problem. The cost has been shifted to me or they suggest buying a new dishwasher for only $150 over retail. They are hiding behind a warranty that expired, but the problem started at time zero when it was made. This is garbage and I have been without a working unit and continuing to argue with them over the repair or replacement cost. Call if you have this problem because they have identified it and have a solution that they will not tell you about.

This is what transpired on the with GE: I called GE Service because the Magnetron is defective. I had trouble talking to anyone because the Serial Number label on the unit is BLANK. Also, the unit is 9 years old. However, my owners manual reads additional nine-year limited warranty. The customer service rep said the additional warranty is 5 years and GE WILL NOT honor the GE printed manual I have. I was escalated to a supervisor and the first thing she asked for a Serial Number to schedule a service call. I said no, all I want is a new part and she responded cant do that and I cannot schedule a call without a serial number. Hello, the label is BLANK. We went back and forth, getting nowhere and I got angry (I hope can recover the call), she is an IDIOT!Well, opened up the unit and lo and behold it isnt a GE part. I got on eBay and purchased the DAEWOO part (the magnetron the microwave was built with) a lot cheaper and repaired the unit myself. Oh, she said you cant do that. Sounds like Big Brother is alive and well at GE. I dont expect a response since I have been dealt with by the most inhuman people at GE!

Im very upset with my self for not doing the proper research on this product. I cant imagine a dishwasher being worse than this one. From day one, it never cleaned; half the dishes are always dirty. Some soaps work better than others. Still dirty dishes. We paid nearly $1000 for this machine, and once again, it has backed up. I will do my research next time. Their service department tried to tell me it was because it needed to be cleaned. GE never again! I have a busy family, and there is nothing more frustrating than having a dishwasher and not being able to use it.

Our microwave caught fire today and burned our kitchen, stove top, & attic. According to the Fire Captain, the cause of the fire was the GE microwave panel shorting out. Had my mom not been standing right there as it happened, our entire house would have surely been a loss.

If you have a choice, run away from GE like the plague, because if you have to make a warranty claim, it may become a nightmare. I purchased a new home May of 2015, and my wife and I paid for the appliance upgrade to the GE Profile, which werent cheap. Less than 2 months I noticed that the microwave had a burn spot on the bottom of the door where it sits against the exterior of the microwave, the paint was burnt from the metal, and the rubber seal melted. I did not think too much of it because the microwave still worked and unless you opened it you did not see it, so it wasnt so much of an eye sore. Fast forward to January 2016, my wife informed me that the microwave stopped heating, and that she was going to put a ticket in to New Home Warranty, I informed her that we probably need to go to GE directly as I knew that is what they were going to say. So I called GE and put in a Service ticket. They informed me that it was going to be a little over a week before anyone would be available to come look at it, to which I was OK with. The repair guy finally came. I explained to him in detail what the issues were. He opened the microwave, closed it back, wrote some things on his computer, and told me that he ordered a part called the magnetron tube, which sounded like something from the transformers. He told me it would be a week before the part would be ordered, so I asked him if it wouldnt be easier for them to just replace the microwave. He told me that it is a warranty repair and they have to try and fix it first and if not, then they will. The evening before the repair guy was supposed to show up to change the door and the magnetron tube, I got a voicemail stating that the part will not be received until the evening of the repair, so they rescheduled me for 2 days later. GE just assumed that I would be available, because I probably sit at home all day waiting for service repairs. I called back the number to see what was going on. I was adamant that they replace the microwave, because by this time it was already 3 weeks without a microwave. And with small kids in the house it was very annoying to have to put a pot on the stove every time you needed to heat anything. After 45 minutes, I was still nowhere with them, so I ended up sticking with their new appointment window. I was leaving for work 2 days later when I noticed the repair guy at another home in the community. I thought to myself why couldnt he have done our repair the same day if he were already going to be in the neighborhood? About 45 minutes later my wife called me and told me that the repair guy showed up to repair the unit, that they were supposed to repair a day later, only to be told that the damage on the door was caused by arching, and that it will happen again so the microwave is non-repairable, so they will have to replace it. He told my wife that she will be receiving a call from the warehouse within 24 hours to schedule the replacement once the microwave is available, but she could call the warranty repair department to see if they could expedite it. After another 25 minutes on the phone going back and forth we were told that it will be about 7-10 business days before the microwave may be available. Now it is good to note that the warehouse where they stock the product is only 2 hours away from where I live. So by the count of it by the time we receive a new microwave, it would have been about 5 to 6 weeks from the initial call to get the issue taken care of.

For the amt. of money I paid for this microwave, you would think it would outlast the house. I bought it 3 yrs ago. The touchpad covering started to get warped right off the bat, and the handle was always steaming hot when you used the stove top (also GE). The other day, while using the stove top, I happened to look at the microwave, and it had no power. I checked the breaker, it was fine. I happened to notice a crack on the touch pad. After further investigation, I noticed the entire touchpad is shattered. It was clearly from the heat given off from the stove top. And I wasnt even using the microwave at the time. I sent GE an email, didnt even get an auto response. I am going to call them, but we all know what they are going to say, and I am not paying $482 for the part. Was hoping there was a recall, since so many people on the net complain about the touchpad.

I purchased a GE over-the-range microwave, GE Profile **, on 2/22/2005 as part of a kitchen renovation. I also purchased the GE Profile dual-fuel range, **, and the Profile ** refrigerator at the same time.I am now having to replace the over-the-range microwave as the interior enamel is chipping off in chunks rather than the discreet amounts in the beginning. The dual fuel range burst into flames and was replaced 3 years ago (the line was eventually recalled). The tracks that support the drawers in the refrigerator are breaking off slowly but surely, meaning they will not be useable shortly. I would not take a GE appliance as a gift.

We bought a suite of Slate GE appliances during kitchen remodel 2 years ago. Weve had the dishwasher, model GDT580SMF2ES, motor replaced twice now and it is still loud and stops intermittently. Thank goodness we have the extended warranty! The over stove microwave is now starting to run when we just shut the door and stops intermittently. Were ready to replace everything with a reliable brand and cut our losses. We will never buy GE again.

My GE dishwasher model #GDF570ddF855 is the worst dishwasher Ive ever owned. I have had 4. Ive had this model for 6 months. This model is hard to turn or to figure out if it is turned on. Right now its locked up and Im following the direction to unlock but it wont unlock. So theres no real on/off button! There needs to be a control on the inside of door where you can turn the lock button. Im writing this so others wont buy this model as they will be thoroughly dissatisfied. Maybe all GE dishwashers are like this? This one sucks...

GE Stainless steel dishwasher rust inside. Its more show than function. Size is great. GE stated in writing that this is normal for GE stainless steel appliances as GE stainless steel is not real stainless steel. Rust is not covered by GE warranty!

Great microwave I have had for almost 10 years. It works like new. Its a name you can trust and not expensive at all. I have always believed in the GE name and their products. I have a dishwasher and dryer that work just as well. I will continue to buy GE products.

We purchased the following from GE: GE Profile refrigerator, dishwasher, microwave, oven and cooktop in 2006 (six years ago). Last six weeks, the refrigerator, dishwasher and cooktop broke! We have insurance through Assurant on the products since it was recommended. We purchased the insurance for repairs and parts. Refrigerator - the motherboard (if you have other words for this) went out (4 weeks for a part). Now it is fixed. Dishwasher PDW8280NSS - This was the final answer from GE Consumer Affairs:I do apologize for this entire experience. I will be more than happy to contact you today between the time frame of 02:30-04:45 PM CST. Any additional questions you may have, you can contact me quickest by email. Again, I do apologize and I will contact you later today to discuss further options available to you. At this time, being the part is not available, the best option would be to offer a prorate on this dishwasher for you in order to have a functioning dishwasher in your home. I do appreciate your patience in handling this matter and will most certainly speak with you this afternoon. Thank you. Really, I have a case manager? The products must be really ** good if you need this as a department. Everyone should rethink buying GE products. Never again. I am campaigning against them! I cant get the part on a six-year-old high-end dishwasher. We live in the US, dont we? This should be a class action suit!

Last year in November while we were sitting in our living room and watching TV around 11:00 PM, we first smelled smoke and then noticed fire under the countertop above dishwasher. Luckily, we were awake to put fire out and disconnect dishwasher. This was all stainless steel, top of the line Profile dishwasher, part of our all Profile line. The next day I called GE customer service only to learn that dishwasher was recalled and that we were never informed about it. Very generously, they offered to replace our unit with equal top of the line PDT750SSF0SS. Instead of taking them to cleaners, as my lawyer suggested, I was stupid enough to accept this offer. A week later, dishwasher arrived but straight out of box, the door was damaged and it was full of water for some reason?! Another week passed by and finally this piece of junk was delivered. This December of 2014, just 3 weeks out of 1 year warranty, dishwasher stopped drying dishes. I called customer service and when they learned that I never purchased extended warranty, they told me to hitch hike. They offered me special customer service number which I called, they placed my name on the list, and never called back. This is the worst company I ever had to deal with, the worst products hands down and the most horrible customer service. If you dont take this post seriously and do not run away from GE, I guarantee you will be writing one of these posts, few days after warranty expires. I have reason to believe that these machines are somehow programmed through their computer to stop operating after warranty is out. Monday comes, I am calling DA office and filing claim against this predatory company. BUYERS BE AWARE!!!

I have had two service calls on this dishwasher (Model Number GDT65SMJ0ES) and it is 18 months old. The first was to replace the heating element, which was under warranty. The recent problem was a cut-off switch that will trip when needed. The technician hooked up his computer to turn it back on, a very quick procedure, and it cost us almost $100. This unit should have a trip switch like a vacuum or garbage disposal so that the owner can do it themselves. After that, if the dishwasher still doesnt work, then a call for repair could be made. By the way, the repairman was very nice and respectful to us.

18 Dishwasher Model GSM1860VSS - Cleans terrifically but I have a problem with either a leak or steam which is running the front of my dishwasher and marking it. It seems to be leaking from the black panel across the top. If I check inside behind the black panel I can see marks where water has been running. Please let me know how to fix this. The dishwasher was bought in 2015 and have the receipt from Home Depot. Thanks.

I bought an above-the-counter GE microwave model JVM15405N155 and exactly after four years, it made a buzzing noise and just stopped. Now I knew why the dealer pushed the service contract so hard. I called GE service and the lady told me they cant troubleshoot the product over the phone. I should have never bought an American-made product, rather, American-sponsored as the product was made in Malaysia. Horrible service and never will buy one again. Where were the good old days when made in America was the Gold Standard?

I purchased a GE Profile Microwave 2 1/2 years ago and now it is shooting sparks out the back and making a loud noise. I have to admit that the microwave did work well and my mom even bought the same one because it was good. I never bought a GE appliance before because I was told they have a bad reputation. I thought the Profile Series would be better. Wrong!

Its a over the range model & came with a house purchase. It’s worked flawlessly for over 5 years now - even after being left with no air conditioning in FL for months on end. The only thing I could think to make it better is making it easier to choose longer length cook times. Button for half min & dial for all the rest can be irritating for your 16 min food.

I have a newer (one-year-old) but base model GE microwave. I wasnt interested in lots of features, like convection cooking and such. I only use it to reheat coffee, occasionally heat a frozen meal, etc. It functions as designed, and Im very happy with it.

There was a recall on my fairly new dishwasher. The heater was causing fires. The repairman came and said I had to remove my ceramic tiles in front of the dishwasher for him to pull it out. I called customer service and a Tina offered to reimburse me $200 to have someone remove the tiles and pull the dishwasher out. I paid a handyman $250 in cash to have it done, called GE and they sent a man to fix it. I called again for my $200 and explained their man fixed it. They now wanted a bill from my floor man. I sent the bill and they refused to pay because the bill did not say paid. I called and asked them how their repair person could have fixed it if the floor had not have the tile removed and the dishwasher pulled out for him. I said, Ask your repair person to verify that the tile was removed. The answer was they couldnt ask him. I sent the bill again with a note saying paid in cash, a picture of the floor and a picture of me - a 74-year-old woman with a note saying it was impossible for me to have ripped up the ceramic tile and backer board myself. Again, I got a reply that the receipt that I sent was not acceptable and the case was closed.

Two years ago, I replaced my 25-year-old GE bottom-of-the-line dishwasher because it made a noise like a freight train. I was ecstatically happy to have a brand new top-of-the-line stainless steel GE Profile dishwasher that hardly made a sound while working. Well, that is the best part of the new machine because it also hardly cleans. We have tried different detergents, additives, etc. We have checked our water temp, pressure, etc. Not only does the machine not clean all the silverware/dishes, it doesnt dissolve and remove all of the liquid detergent, so I have to run the machine through another rinse cycle. We are so frustrated in my house that we have finally given up and now hand wash our dishes. I hate this dishwasher and would never buy another GE product again! I also had an issue with a GE bottom freezer fridge. But thats another story. By the way, the old 25-year-old machine? It always got my dishes clean.

I bough a GE microwave oven, model JVM1740SM1SS, less than 2 years ago. The keypad says that it is shorted out and needs service. It turns on randomly. I unplugged it and plugged it back in, and it will either say, service needed, keypad shorted out or press clock.GE has so many complaints about there microwaves, some that are very serious. They still claim that there are no problems with them. They have to know there are problems, but do not want to issue a recall and take a financial lose. Its only a matter of time, before something so serious happens that it will be a bigger financial lose than a recall.

The one thing I would change on this model is a top rack sprayer. The rack sizes are nice. The bottom rack holds pots and pans well, but top rack dishes need a good pre rinse before washing.

My GE microwave oven died after 4 years. And my GE washer died after 5 years. Never ever buy a GE appliance. The market agrees, because their quality issues might be the reason the company has not been able to sell their appliance division for several years now.

Our GE Dishwasher is about 22 months old and is now not starting. GEs customer care is a joke. All they want to do is send a repair person with a $110 fee just to come and the person making the appointment refused to tell what the labor rate would apply once they got there. They offered zero help as far as troubleshooting. I called a local repairman and was told he has had many similar issues with newer GE Dishwashers. We are throwing parts at the problem now trying to get it running. He also said repair assistance or troubleshooting from GE is very poor. Really not pleased having a less than 2 yr old major appliance not working. GE means JUNK to me.

My microwave is a very easy to use. The settings are not complicated and offers a variety of options. It has a shelf and turntable that can be shut off and on. The filters are very easy to access and clean.

Our microwave is spacious, simple to use and dependable. This is about the fifth microwave I have had. The others only lasted about 6 months. My current microwave is about 5 years old, despite the fact that some of my previous ones were also GE.

We purchased a black over the stove microwave from GE, the oven has great preset buttons and it extremely easy to use. It looks sleek and works great. The only issue we have had was a few months after purchase we tried to change the bulb for one of the lights and the entire mechanism crumbled and fell out so we only have one light now over the stove. Disappointing but everything else works great.

I work as a service tech for a major insurance company. I am a master tech, and master electrician. The company that I work for owns an apartment complex which is used to house company executives whose offices are located at other sites, but often come to the Chattanooga Site to work short term. I was called to repair an old dishwasher in one of the apartments. Upon looking at the existing dishwasher, I decided to replace with a new one. I received a new GE model GDF 510 PGD 1WW dishwasher on November 8, 2013. As usual I unpackaged the appliance and examined the exterior. Finding no visible damage, and with the help of a master plumber, I removed the old dishwasher, and installed the new one. After all the connections were made, I opened the door, removed all the packaging from the dishwasher, and found the upper spray arm lying in disarray in the bottom of the machine. Assuming that this was the way that the machine was packaged, I installed the spray arm, plugged the machine up and started the machine as the operations manual instructed. The machine would not work. The power lamp would burn solid for a few seconds and start flashing. I tried to start the machine a number of times while reading the instructions, and while my partner read the instructions aloud, but with no results. Finally, I used a screwdriver to hold the door switch closed, pressed the start button and the unit started. The catch mounted on the door would not make the door switch, mounted on the machine body. We tried to adjust the switch and the catch, but with no success.The dishwasher did not show any signs of exterior shipping damage, but for some reason the upper spray arm was off and lying in the bottom of the unit, I found a small piece of broken plastic and a screw in the bottom of the machine, and the door switch would not make. Outside that I have no complaints. I am not sure where this machine was assembled, but it certainly was not equal to the machine that we removed. Thanks GE for making my job harder. I will have to find another dishwasher Monday and replace the damaged one, and perhaps send this one back, but the replacement will certainly be another brand.

I bought a JVM3670SK05 a little under two years ago. It is an above the cooktop vent-a-hood microwave. I believed I was buying a quality unit. Now everything is working, but there’s no heat! Even the cheap units from Walmart work longer than this expensive piece of crap! Now I either have to spend enough to buy a new hood for cooktop and new microwave or pay the same price and buy parts in hope that they will not go out again. Not really feeling lucky with the GE product.

I purchased a new GE washing machine, and a new GE dishwasher, less than 5 years ago. The washing machine started leaking suddenly, and the repairman stated it was due to a cracked basket. They stated this was very rare, but the warranty had expired. The repairs would cost as much as a new machine. The dishwasher stopped draining water. A repairman advised there were two pumps, and one or both may be out. Estimates to repair the unit were only slightly less than the cost of a new unit.I will never again purchase GE appliances. I believe the life of a home appliance should be longer than 5 years. The cheap units I bought in my younger years lasted 20 years, without any problems. The GE units are not quality machines, and repair costs are outrageous. Nice way to try and convince appliance owners to just go buy new units. I can guarantee, I will not buy GE products ever again.

I purchased the micro from Sears. This is the replacement for one that was provided by the builder. The G.E. now needs replacement. Will work for limited periods of time. I have used it more than my stove to cook chicken, beef and whole meals. I will be replacing it with a new G.E.. The current one has lasted more 10 years with very heavy use.

I wish I could rate this dishwasher ZERO stars. I bought my first GE cafe series approximately 6 months ago and after the first week, there were three separate, unrelated problems. I called GE repair and the serviceman came out and said he fixed all the problems. He did not. I contacted the store where I bought it, and after contacted GE directly was able to get a brand new one. After two months, problems started again. Once again the repairman came out. Long story short - 2 months, and three sick days later (on my part) dishwasher is still not cleaning dishes thoroughly. I contacted GE several more times and they sent me some dishwasher cleaner and offered me a discount on a new GE dishwasher.... I will never purchase another GE anything and advise everyone else to do the same!