GE states they do not repair microwave ovens under warranty. Instead, they offer to reimburse you at MSRP for repurchasing the unit if you will show evidence you have ruined the units operational function. The interior bulb burned out in my unit, I disabled the unit, sent in pictures and receipt. They sent a coupon for about $30.00 less than MSRP and lied about the conditions of reimbursement. Brendia, the agent I spoke with, broke off email contact when I stated the unit was no longer available from the sellers on the GE seller list (including the seller I originally purchased from), and that the unit was only available at MSRP from the online sellers I could find. My microwave is inoperable and GE has not responded or offered to increase reimbursement to MSRP. I have not located a chain of command to whom I can report Brendias dishonest management of my case.

Dishes on top shelf do not get clean, and Power Dry does not dry dishes. Technicians say nothing is wrong with the unit and customer service was a nightmare.

I purchased a GE Profile dishwasher in June 2015. It was delivered dented.19 July it was replaced. The dishwasher worked for 3 months. Then it stopped working and the display panel had a LEAK DETECTED, DO NOT USE, notification. We contacted GE who could not find a GE repair technician to come and repair it in the entire BAY AREA. The dishwasher was bought at SEARS who refuses to take any responsibility.

We bought this microwave (GE DE68-00307A) brand new 2 years ago and the paint is peeling off everywhere!!!! I keep my microwaves extremely clean, and this was not due to wear and tear by any means. I would say it started after about a year and a half of having it. I have showed multiple people and I cannot believe this is not on a recall list. This is extremely dangerous and could cause many issues. I am hoping someone can do something about this manufacturer and this product. This alone will make me never buy a GE product again.

I bought a dishwasher 2 1/2 years ago, along with GE fridge, microwave, convection oven for my remodeled kitchen. It was less than a year old, when the dishwasher control board went. GE fixed it for no charge, as it was under warranty. They sent the part, and the repairman was great. A little over a year later, the same thing happened. It is no longer under warranty. I spoke with a supervisor about this. This dishwasher was just over 2 years old, and again, the same thing happened. They were very nice, and sent a man over, after sending the same part in the mail, and again, he was very nice, and I was called to see if everything was to my satisfaction, and it was. I was not charged. It is now a few months later, and the machine will not begin the cycle. The lights are on, blink several times, then finally go off altogether. I did the troubleshooting suggestions, including turning it off via the circuit breaker to reboot, and still nothing. I am so angry. This is a relatively new machine. I am so disgusted that I will never buy another GE appliance, and strangely, I have stock in the company. Its a small amount, but stock nonetheless. What a shame. Now, I have to spend a lot of money on a repair that I should not have to. GE charges $90 just to walk in the door. I was told the second time it would be over $200 to repair a 2 year old machine. It is not the customer support nor repairmen that I am so angry about, rather, it is the ** machine, which is not even 3 years old! The thing is, I always try my best to buy American products, even cars. Before I call in a repairman, I am going dishwasher shopping, in case I decide that it is simply not worth an over $200 repair. I will not be looking at GE.

The dishwasher does not clean my dishes and they say that there is nothing wrong with it. **! Now my microwave / convection oven is sending sparks in the corner of the oven. I have read a lot of reviews about this model and it has happened to many consumers. GE can rest assure that Im not buying another product from them, EVER!!!! Model # PVM 1790Dr1WW. Serial# **. February 2013.

GE has agreed to replace and install my microwave. I am very satisfied that they understood my concern in this situation and agreed to my request.

We purchased the entire line of slate/GE/Adora appliances from Home Depot 11 months ago. The fridge has required a service call for a VERY loud freezer. The microwave is fine. The stove/oven is fine. The dishwasher is a GIGANTIC piece of junk! 4 service calls and its still clunking, tapping, grinding and just extremely loud. VERY DISAPPOINTED!! We can only run it at night because of all the racket. The layout of the sections for dishes makes it totally useless inside. It doesnt clean. Soap residue is everywhere. My old DW was quieter and more efficient. *Insert sad face here.*

We purchased a GE Profile dishwasher because our old one was recalled for fire hazard and we were offered a rebate on a new one, and told there was no fix for the old one. On the new Profile dishwasher, the water inlet valve stuck open and flooded our home. Tech said we may as well have had a hose on full blast all night. Word to the wise, do not turn your dishwasher on and go to bed or leave the house! 7 1/2 hours later we woke to a completely flooded downstairs. When we were researching whether or not there were other complaints on that model dishwasher, we noticed there had been a recall for fire hazard ON THE NEW DISHWASHER! Since this is located right under our bed, we were fortunate though not happy about the flood! We have exceeded the 40K mark in damages and the assessments and estimates are still coming in. We will never own another GE product, though we recently purchased a stove with a double oven which is thus far wonderful. GE has also recently been purchased by Electrolux. We chose a Bosch for our new dishwasher.

Dishwasher works fine; however, do not like the interior which is all plastic. It comes with several tray holders which I found awkward to use. I wish it took less time and water to get the dishes done.

Our GE microwave stopped working after about 7 months of use. Ive never had a microwave break down on me before. Ive owned other brands which Ive used for years, actually lasted over 10 years. The only reason we purchased the GE microwave was because our old microwave was too big in size. I called GE for warranty service and it was very much of a hassle just to make the appointment. I had to call several times because a customer service representative misinformed me. It took a couple days just to set up a service appointment.Ive told the representative that the microwave stopped working and will not power back on again. The representative told me that the fuse probably went out. Something must have blown out. Finally, the appointment was made for about a week later, which was the earliest time available. It is so inconvenient not to have a working microwave even just for a day. Anyhow, the service tech came about two hours late. The scheduled time was for 8am-12 pm. He showed up close to 2pm. A family member was waiting at home all day because of this. Then the service tech told us that he needs to order a part for the microwave and that he will return a week later to repair the microwave.A week later, he didnt show up. No one even called. So I called back GE and found out that the appointment has been postponed! So now, we have been without a microwave for about three weeks. I think this is ridiculous. Im pretty sure that this is a common problem with GE microwaves and they already had an idea why the microwave wasnt working. It doesnt power-up! Now they are telling me that they dont have the part/s in stock? If I had known that we had to invest so much time and go through so much hassle from the get-go, I would have just purchased a new microwave three weeks ago. GE should pay me for all the time Ive wasted!

I purchased a slate dishwasher in Oct, 2014. After the third cycle the soap would not dispense (door would not open) or the soap dribbled out and remained running down the door. I had to run the cycle twice to get the dishes clean and for the soap to dissolve. I called the store at which it was purchased. A tech came out and replaced a part. Did not work. After the second time, when the tech said nothing was wrong, even though he saw the soap running down the front door, I called GE. They sent a tech from a different store. After the eighth repair I told them I wanted it replaced. They had already replaced the soap dispenser twice, the control board and even told me to move the baskets (ridiculous). They also suggested I run hot water before the cycle! They said if it was repairable they could not replace it.We went back and forth with this and they finally agreed to replace it. Got the new slate dishwasher in July, 2015. After two cycles I started having the exact same issues! I will not deal with GE or ever buy another of their appliances. I will tell everyone I know not to deal with this company. Quality is terrible and service was extremely frustrating, having to take off work numerous times and wait hours for the service person. In the end, it never worked!

I am a licensed master plumber. I do a fair share of high end kitchen installs, I noticed that in the last 5 years that all GE dishwashers I installed had a whole lot of extra parts to be installed by the installer. For example. Today I uncrated and tried to roll a GE dishwasher I got 6 and a drip tray fell out. Then when I went to install the dishwasher in the cabinet I had to install 4 different rubber flanges. When I went to push the dishwasher in the flanges came loose and hindered the install. The the insulation jacket kept binding up. The last 10 of these GE dishwashers I have installed the dishwasher appears to be racked or not square. I had to tell the General Contractor that I dont want to install the GE dishwashers any more. Way too much trouble. I have much better luck and ease of installation with Miele and Bosch. The GE dishwasher are very frustrated to install. Bob Licensed Master Plumber since 1982Richmond VA

We bought the countertop stainless steel microwave model JES1142SJ the end of 2010. Noticed a rust ring under the revolving paint about a month ago. The paint was chipped off and when I washed it with a dish cloth, more came off. It is getting worse. We didnt stop using it since it seems it is only coming off under the plate but is it safe to continue using? Could it catch fire? Is it putting bad things in the food we heat in it? Even though it is not an expensive microwave ($100-$125) it should not be rusting inside. It should last longer than 3 years!Sounds like GE will not back up their products since so many microwaves owners are complaining about the paint being inferior and flaking off. There should be a recall for this problem on all microwaves sold by GE. Complaints have been from countertop to the most expensive dual stoves! This is not acceptable and GE needs to step up and deal with the problem with their microwaves that they sell. I usually buy GE; but this is making me have 2nd thoughts and think that my ones I bought in 2010 will be the last purchased from GE.They did come out twice for my range when the oven stopped working at 2 years and one of the eye knobs to turn on and off needed to be replaced when it would not turn off. But a 2 year old stove should not have needed any repairs. I noticed a big difference in quality after I bought this new one when we moved. My old GE from 1996 is still my favorite one and is still working just fine in my sons house.

I have had 2 of GE microwaves, above the range models. Both the same model, but different years. One stainless finish and one almond. They are almost exactly the same. They are efficient, and I like the carousel for even cooking. But I would like it if the light bulbs under unit were easier to replace.

My GE microwave works perfectly for microwaving and baking. It is also a convection oven and it works as well for baking as the microwave component does for microwaving. It is roomy and accommodating. Ive had the microwave for 10 years and have never had a problem with it.

I was sitting on my couch and I heard something running. I walked into the kitchen and saw my GE Profile microwave was running. At first I doubted myself and thought maybe I did something and then I cleared it out and went and sat back down. It did it again and again several more time. This is very scary. It was running like someone had set it and it was getting hot inside. Im not sure what else to do. The last time I had the same type of problem and just bought a replacement microwave and now this one is doing the same.

A few years ago, I purchased a brand new GE microwave oven. A week ago the microwave oven stopped working. I contacted an Appliance Repair company for repair. When the tech came & disassembled the microwave oven, he discovered pliers inside the oven. We took pictures of it (BTW, it wasnt the cause of the problem). I contacted GE to alert them of this & they told me that the robots that assembled the microwave oven probably dropped it in there. Then they said they will send a tech to my residence to investigate. I told them that the pliers was removed & the microwave oven is fixed & assembled. Nonetheless they sent a tech anyway. I told the tech what his Customer Service said & he said he wasnt surprised about the tool being inside an appliance from GE & GEs response. In summary, I would not recommend purchasing any GE products. They proved their products are a safety hazard & they dont care about the consumer nor their safety. All they care about is taking your $$$.

My GE dishwasher is 30 years old and has never had a service call. It has a built-in food grinder and my dishes almost always come out spotless. Standard size, upper rack, removable utensil basket. Almond with a dark faux instrument panel with rotary dial. It was a builders model. Works like a charm but very noisy. Even though Im a small family Ive tried to use it consistently to keep the seals lubricated. It has stayed really clean inside with just using the dishwasher detergent. Unit does have some kind of preheat Electrical for the dish water temperature. The new ones dont work so well so Im afraid to replace it.

I have a microwave that has a rack inside which gives you options other than using the rotating plate inside. Overall it works quite well. I did not purchase this microwave, it came with the apartment. Not sure if I would purchase this brand if I were to buy it for my own home.

I have a GE Profile model JT965SK4SS micro/oven combo. It came new with my new home. A couple years into it, the paint (lining) interior of the microwave start to bubble and peel and eventually started rusting. Had SEARS come out (warranty had expired) who contacted GE and they concluded it was only cosmetic that it doesnt affect the functioning of the microwave. Well, its gotten a LOT WORSE now, bubbled peeling paint all over inside, rust, exposed metal, and the paint is falling onto food. I can NOT even wipe out the interior to clean it, it makes more stuff come off/fall down. I called GE last week, was told by 2 employees that it is NOT safe to use anymore, discontinue use. I had SEARS come again (per GE). The tech said he had NEVER seen anything like it before. He called GE to tell them its not safe, exposed metal, and its dangerous. They again said, well maam, youve gotten 8 years use of it. We wont replace it, but will offer you a discount for a new one ($2,500 out of pocket for me). The person who had offered me the discount (yes, I sent pictures, showed how bad it is) also gave me a tip regarding the unit I have now with the exposed metal and the chance of arcing (spelled? like Ark) if the unit catches on fire, make sure not to open the doors, the fire should contain itself. 2 employees told me its not safe, a 3rd gave me helpful info for if/when it catches on fire... and yet, they still wont replace the unit... and do not stand behind their own products. I plan to go to our local news station, see if they can get anywhere with this, since they wont do anything. Patiently waiting and unable to afford a new unit.

Our washing machine has been with us for almost ten years and I really love the features which make it look modern and easy to dump in a load when we're running late for something. It has been having problems recently but it still runs okay, with only a few hiccups but for a little over ten years, that's pretty good!

We purchased several new GE appliances in August of 2016 as part of a kitchen renovation. We bought the GE Cafe series dishwasher CDT865SSJOSS. Within two weeks of use, the display stopped working. It took 3 weeks to get a technician out to fix display. Approximately 6 months later, we noticed the dishes were not as clean. Two months later the water stopped draining. Called a technician in, he diagnosed a broken pump. Parts would take 3 weeks and he would be out a week later. We are now over a month without a working dishwasher. He “fixes” the pump but says it isn’t draining great because your hose from your disposal is plugged (this hose drains to the same place as the dishwasher). Hire a guy to unplug the drain ($140). It isn’t plugged. The whole house is clear. Have to Shopvac out the stagnant water from the dishwasher that smells like a corpse. Call our plumber to check the lines ($500). He discovers that the technician pushed in the washer and busted a line. We now have water damage through our floor and into a bedroom below. He confirms that the plumbing is all clear and also finds that the technician never reattached the pan to the bottom so water was hitting the sensor and activating the shut off for a leak. Plumber fixes plumbing wrecked by technician, dries the sensor and attaches the pan. He advises that we run several cycles to flush out the stagnant water. If water still is not draining after several cycles, he advised that the new pump was faulty. Plumber leaves. We get 10 minutes into a cycle and the dishwasher stops for a leak again. I called GE hoping they would stand behind their product that we have now had for 2 years and have used less than a year. GE does not stand behind their products. The only thing they will do is send out a technician that you have to pay $100 for and they can’t guarantee that you won’t get the same technician who has come out 3 times and cost us more money due to his negligence. In May, we will be putting their terrible product out on our curb for city wide garbage collection. You no longer get what you pay for with GE. Do not buy their products!

Dishwasher broke after one year, just after the warranty period. The tech made two trips and couldn’t fix it, parts on back order for going on 4 months. Absolutely a nightmare experience along with rude customer service reps that want blame everyone else.

Two years ago, after owning a GE JVM1490 microwave-convection oven (over the stove) for three years, the door handle broke.Let me clarify that I worked for GE first as an engineer, later as manager, for 20 years including 6 in Major Appliances. I am ashamed of what I am reading how GE is treating customers today.I am perfectly capable of replacing the handle myself if I am provided the complete and correct assembly drawings and/or instructions. GE refused to provide me anything when I requested them. The scant drawings and instructions I found online are insufficient. As a matter of fact, the design is so poor that removing the internal bezel, which you must do to reach the handle fasteners, forces you to break the mounting tabs, requiring replacement of this part plus the handle. This was confirmed by the parts store I visited.However, even after removing the bezel, neither I nor another ex-GE appliance engineer could figure out the access to the fasteners. I have glued the handle three times using epoxy and Cyanoacrylate (super glue), but it has broken off a fourth time. I will figure out a way of fixing it before I pay GE close to $100 for both the handle and bezel. And if I replace the appliance, you can be sure it will not be GE.GE should be ashamed of the poor design and deplorable customer service they are giving now. How things have changed!My suggestion is that all with this problem post name and phone number of GE customer service personnel they spoke with.

I just built a new home and opted for all GE Slate appliances. No problems so far with microwave, fridge, and stove but the dishwasher has never once been dry or cleaned all dishes. We have had it a little over a month! Today when I went to run it, there was mold growing! I had a KitchenAid for 9 years and never once did any of this happen. From reading other complaints, it looks like Ill be living with this for some time. I will never purchase GE again.

I moved into a house with the dishwasher already installed and it didnt work. We closed it so we didnt use electricity but it started and wouldnt stop. The power button is broken. It just sits there and the lights are always lit. I tried calling for help but the workers were very unhelpful. I called a different number and was waiting a whole five minutes and no one picked up!

I have had it with GE! Only 18 months after install, my beautiful, stainless, three-rack, GE, top-dollar dishwasher will not turn on. Repair attempts have been futile. Tech said not to expect more than seven years service out of new appliances. Were tossing this junk and buying CHEAP replacements going forward since all we have to choose from is throw away products. OEMs like GE should realize they are shooting themselves in the foot with their planned obsolescence business plan.

I purchased a new GE over the oven microwave to replace a 10-year old Spacemaker unit. After three weeks of use with no issues, the unit overheated excessively during a normal use. The heat was so intense that the pegs that hold the racks melted causing a severe burn on my sons thumb. I unplugged the unit fearing further injuries and/or fire. Are GE products manufactured poorly or did I get a lemon? Who knows? Anyone else have a similar issue? I am still waiting for GE to respond.

The paint started peeling on the inside ceiling area of the microwave the end of the first year we bought it. I called GE and they claimed this was not harmful to the operation of the microwave. It was disgusting to have paint chips falling onto food we were cooking. Now almost all the paint is gone and there is some rust too. How can this be for cooking and what if some of the paint is accidentally ingested? If GE did not replace or offer to repair the problem. Stay away from GE microwaves is my advice.

We purchased a manufactured home that had brand new, GE appliances in it. We have been in the home for almost two years, but the dishwasher has never worked well, at ALL, even when it was brand new. We called GE and they sent a local appliance repairman to our house. He said that there was nothing wrong with the dishwasher. They are just junk. Amen! I have tried running the water in the sink until it is hot before the dishwasher fills up, we have tried using a citrus additive that is supposed to help it clean better, we have tried several different kinds of soap, NOTHING works. It never gets the dishes clean, there is always residue and food left at the bottom of the dishwasher, and it runs for hours on end. I cant wait until I can get rid of this pile of junk and purchase a Whirlpool or anything else. I will never purchase GE appliances, EVER!!!!

The wheels to roll tray in and out comes off sometimes, other than its fine, average wash cycle. Doesnt really clean heavy food off dishes so have clean first then put in dishwasher.

Dishwasher looks and works beautifully. It is slate black and I have never had to redo any dish or glass. It is located. About 12’ from our bedroom door and we turn in on before go to bed. It is so quiet that we never have our sleep disturbed.

Purchased this item online and received delivery on 2/13/15 from P.C Richards. In less than a month after installation of the JVM7195SFSS microwave range oven the keypad stop working making it a useless tool taking space in my kitchen. Ive made more than 4 schedules for repair service. Its now May 15 Ive yet to see a repair person. Here are some of GEs lies for the past three months: GE parts were in back order; the service person claimed I wasnt home; I didnt pick up the phone. Even an appointment on my Sabbath was botched by the service person. While homebound recovering from surgery I called PC Richard who scheduled another service on 5/14/15 between 1-5pm. Still a no show. Yet PC Richards representative stated that the service person claimed that I wasnt home. The next morning 5/15/15 11:40am a service specialist named ** at ** extension ** calls stating the repairman is sick. Im confused! On what date was my repair? How do I get rid of this product installed in my kitchen wall? How do I get my money back? How do I make PC Richards and/or GE complete the repairs without losing a work day for foolishness or forsaking my Sabbath day again?

We purchased the suite of Cafe appliances. After one year of service, out of warranty of course, the touch pad on the microwave quite working. The touch pad on the dishwasher has several lights that do not work. These products are insanely inferior. If you are considering purchasing, I would buy anything but GE.

July 4th, 2010 - GE Profile Dishwasher, Model: PDW9200N00BB, Dishwasher had been humming after cycle was over for a little while, this night I walk into the kitchen late and find it full of smoke. Circuit board has a hole burned though it and wiring harness is melted. Never tripped any safety, could close the door and it would come right back on, smoke and all. This model was not on the recall list but I called GE anyway. After describing the fire they send someone out, then they send a new dishwasher out and install it. I assume they wanted the old one to look over or just to get rid of it. New washer installed the end of July 2010, new model number PDWT500R10BB. Today is 2012-02-02 and the new machine would not stop at end of cycle (Got down to 1 minute and stay there for at least 20 minutes before we turned it off). This machine is now making the continuous hum after the cycle stops that the old one did before it caught on fire.Called GE, they said they could maybe go half on parts and service until they checked where I was located. (Wichita, KS. Area population 500,000+) They said that they didnt send factory techs to my area and I would need to contact a local repair service. I pointed out that they had a factory guy for when my machine was on fire and they said it was just a malfunction now, so they could not. No half on the price for repair either at this point. This is a $1100 to $1200 dishwasher with, as near as I can tell from complaints online, a history of going up in flames. I understand things break etc, but when you continue to put out products like this and then refuse to remedy the problem, I and anyone who will listened to me will never own anything GE again.

We bought a GE dishwasher and a GE oven/micro combo. We were told that we would have them in a week but it took three and a half weeks to get them. The dishwasher was damaged/defective and did not work; water leaked all over the floor several times and dishes wouldnt wash. They would not replace the unit but insisted that they had to service it. A couple more weeks passed and the repairman had to return thrice to finally get it to work. The microwave had a bent door that did not lineup properly when closed. Again, another repair was scheduled and we had to experience another service call. I have never had a worse experience buying appliances than I had at Pacific Sales. Kwam, the manager does not return phone calls. He made promises of helping us with a discount because of our troubles but has not kept those promises. Their contract installers are inept and unkempt. My appliances do not seem new since they were repaired and the door on the microwave is still not lined up as a new unit should be.This experience was an unmitigated disaster that should not happen to any consumer. Never will I buy anything from Pacific Sales or their parent Best Buy again. These problems are created by their management and their management does not care.

GE microwave oven (jes1651sj02) started to spark like lightning, which can be seen through the inside vent grid/grill located on the right. Sparks are seen just behind the waveguide cover where the magnetron is located. It seems to be a common problem with GE microwave ovens from what I have researched. The microwave has now stopped working and just makes an odd noise like groan or urrrrr. It’s just over 2 years old. Its a piece of **. It should last 10 years or more, like my last 2 have. I gave away our Sanyo because it wouldnt fit the decor of our new kitchen - wished I never had.

My dishwasher is very quiet and effective in its use. I am very pleased with my unit as I saves water and power when in use. It also cleans very well and smells good as it drains completely. General Electric is very reliable and outstanding company and is made in the USA.

As a landlord I have about 20 GE microwaves. I have had 8 handles break off in the last few years including the one in my house with me pulling the door open. Standing straight in front of it, just pulling regularly. Replacement plastic handles - just two pieces of injection molded plastic - selling from other companies for as little as $10 are $130.00. $130.00! There is a clear design defect here and the companys solution to it is to charge $130 for the plastic replacement part. Someone should go to jail. Literally. Please include me in the class action lawsuit.

I have the GE Monogram series dishwasher. This machine has some great features. It lights up when the door is open. It is the quietest dishwasher I have ever owned. The only negative that I see is, it is slightly small on the inside.

My GE microwave is the Advantium version which’s heats to a 1000 degrees. In fact, today the 4th of July I will be using it instead of the BBQ. I have baked, broiled, heated and other things in this unit. This is my 2nd one over the years and I enjoy it immensely.

To inform others that need an under-cabinet space-saving microwave, unless you are replacing an existing GE unit (and want the mounting brackets to align for easy re-installation), I would strongly suggest getting a different unit. I am about to buy my third GE undercounter microwave for the past 11 years. The rest of my kitchen is pretty high-end Thermadore, Kitchenaide, ASKO, and Braun. My last Profile PEM 31 DMBB lasted less than three years. The Toshiba that I bought while deployed to Okinawa lasted 15 years.

Had model JES1460DS3BB less than 2 years. I started to smell burning plastic when using it. Research tells me the wiring is burning up. Im sick and tired of GE appliances. Ever since my GE toaster caught on fire in 1969 Ive had bad luck with GE. I gave the company another chance when I bought this microwave. I will never buy another GE appliance - large or small.

I give it stars for value because an extra step is needed to set cooking time. Most microwaves do not require pressing a cook time key before selecting # of seconds. Other than that, microwave is first-rate and very dependable. We use it several times a day for 1.5 years now with no problems.

5 years ago I updated my complete kitchen with Adora LG appliances. To my dismay, the handle on the microwave (Model DVM1950SR1SS) began peeling like paper. Now I have a white plastic handle that’s supposed to be stainless steel as an eyesore in the middle of my kitchen. When I called GE replacement line, I was informed the handle was $164! My 5 year old kitchen is out of date! As far as I’m concerned this is a defective part and GE should replace it at no charge. I have been a faithful GE purchaser for many years. After this mishap, I will no longer recommend GE appliances or will I purchase them.

This dishwasher was brand new in our new house. It didnt work right from day one. GE service came out 3 times to repair. The first 2 times the GE tech was here all of 5-10 minutes and didnt repair it either. The 3rd time the tech actually pulled out the dishwasher and found the problem and fixed it. Their customer service was terrible.

We have an under the cabinet microwave oven. I like the size of it and it works well. It is white so it gets dirty from cooking on the stove. It has a light on it for 2 different lighting needs. It has a brighter one and one for night time also. The buttons are really easy to use. Not hard to program it at all.

This is what transpired on the with GE: I called GE Service because the Magnetron is defective. I had trouble talking to anyone because the Serial Number label on the unit is BLANK. Also, the unit is 9 years old. However, my owners manual reads additional nine-year limited warranty. The customer service rep said the additional warranty is 5 years and GE WILL NOT honor the GE printed manual I have. I was escalated to a supervisor and the first thing she asked for a Serial Number to schedule a service call. I said no, all I want is a new part and she responded cant do that and I cannot schedule a call without a serial number. Hello, the label is BLANK. We went back and forth, getting nowhere and I got angry (I hope can recover the call), she is an IDIOT!Well, opened up the unit and lo and behold it isnt a GE part. I got on eBay and purchased the DAEWOO part (the magnetron the microwave was built with) a lot cheaper and repaired the unit myself. Oh, she said you cant do that. Sounds like Big Brother is alive and well at GE. I dont expect a response since I have been dealt with by the most inhuman people at GE!

Not only does this dishwasher do a lousy job of cleaning dishes, I have just found out it allows dirt to collect under the door flange==lots of dirt! There isnt enough hot water to clean this out. Very gross--do not buy.

I purchased a GE Spacemaker microwave in Jan. 2001. Shortly thereafter, the frame around the door cracked, becoming worse until in Oct 2006 I complained to GE. They sent a $75 credit towards another GE. I purchased another GE in Oct 2006. After a while, the handle became loose. Today, the handle broke off at the base where it attaches to the door, rendering the oven unusable. I dont have kids. This appliance was not abused. I see in looking through the comments that other consumers have had similar problems which would suggest a product defect. My next microwave will not be a GE.

Ive had my microwave for 12 years. Ive never had any problems with the microwave since its purchase and very pleased. I dont plan on replacing until the microwave would stop operating or not pleasing in the kitchen.

Enamel curdles and becomes unattached from the ceilings of the interior of the microwave. Family member purchased 3-yr. newer model and the same thing happened. Theirs makes a terrible noise while cooking! Inferior product - inferior, unreliable materials!!! No accountability or sign of improvement! I will never buy a GE product again.

28 Inch Front Load Washer with 4.9 cu. ft. Capacity, 13 Wash Cycles, 1250 RPM, Steam Cycle, Steam Assist, Time Saver Option, Sanitize Cycle, Energy Star in White. Overall this machine is top of the line. Purchasing a home appliance is like purchasing a vehicle. I took my time and reviewed and compared before purchasing. About 3 months. I had just purchased a home and so you want an appliance that is going to last. It has a 10 year warranty. It has 3 color options. It's cosmetically attractive. It also is elevated which is a smart choice for a basement machine in case you have issues with water in your basement.

I purchased a jes1451dn1bb microwave 16 months ago and I just noticed the enamel coating on the top of the unit is chipping. GE has been unhelpful, saying it is outside the warranty and I need to mail the cord and sticker inside it to have a rebate issued. Since I use my microwave daily, I cannot wait until it is processed to buy a new unit. Not only did the product endanger us with exposing our food to paint emissions, the company has been unhelpful. I highly recommend buying another companys product and do your research!

My microwave (model#JES1139BL03 and serial#901897B) is peeling around rolling fixture that holds glass tray. I wipe it with hot water and it continues to peel off. Its almost all gone. Ive only had it two (2) years. This cant be normal. Anyone else have this happen?

I purchased a dishwasher from GE 3 months ago and it broke, just stopped working. I called GE. After being on hold for an hour, they scheduled a repair call with At Bay Appliance, gave me a confirmation number and everything. AT BAY dispatch says they never received it and cannot schedule an appointment with me, I have to go through GE. I took the day off of work for this repair!I called GE again and was told to call Consumer Relations who apologized and scheduled a second call with AT BAY, apparently the only company who can repair in the SF Bay Area. Guess what? They say they never received the repair order and that I have to call GE. Again, I took a day off for this repair. What is this? Ive never experienced such poor service in my life.

We have a 2017 GE profile built on microwave. The microwave started shooting fire inside the microwave a year ago. GE fixed it. Last week the microwave started shootings fire inside the microwave again. This time it was much worse. The GE technician told me it was not fixable. I called GE customer relations and was told too bad because it’s not under warranty anymore. They offered a minimal discount on a new similar model. The attitudes of the customer care representative and supervisor took me by surprise. They were curt and told me, Guess you should have gotten the extended warranty. When it comes time to replace my kitchen there will not be any GE products in it. GE does not stand behind their products. The tech told me there are issues with the profile microwave and he felt they would replace it. They did not replace it and were rude. I have been a loyal GE customer. Not anymore.

I purchased my machine in 2019. The only concern I have with this machine is that I’m never sure of the amount of water that fills the tub with some features that I’m not used to. The tub on this machine enables me to wash very large loads including my queen size quilt. After washing, my clothes are practically dried which cuts down on my electric bill for the dryer. The drain and spin feature allows for a drier finish. Everything else is good. As long as you’re using the right soap the clothes are the cleanest.

I bought GE Microwave JES1139BL03 in 2011 and the white paint inside has been peeling off. I think it is defective because I have had other brands and none of them have done this. This microwave was manufactured February 2011.

We bought a new GE dishwasher 28 APR 2020. I noticed it wasnt working right about 5 months later. We are just over 1 month from the end of the warranty. The store where we bought it has been fantastic, but theyve been out 5 times to try to fix this sucker and they cant. GE told ME they would replace it if the store called to say they couldnt fix it, but when the store called, they refused. Theyre sending the repair guy out yet again one week before the warranty expires so he can call them and theyll talk about it while hes here. Ill never buy another GE appliance again.

This GE CVM2072SM1SS Microwave (over-range model) worked fine for five years. Then, we discovered the plastic film over the touchscreen starting to peel. After a bit of wrangling with Consumer Relations, they sent me a replacement touchscreen. The LCD didnt display properly, so they sent me another one. It worked for three months, then in the middle of programming to reheat some food, we got the following error message: Control Fault, Shorted touchscreen - F10. The control has detected a shorted touchscreen and has shut off the oven. It may still be possible to use the oven. However, if this message continues to appear, your oven will require service.The only way to clear the message was to unplug the unit. No amount of replugging in cleared the message. I called GE and they said they would replace the entire unit with a new model under some program they had. Sounded fine to me. I left the house. When I returned, I received a message that their representative called back to say they would not replace the unit, since the program had expired. Huh? I called again, and after a bunch more wrangling, they agreed to send a service tech out and replace whatever needed replacing or fixing at no charge. Of course, they never really made a notation of that, so when he got here, he had to get on the phone and sort it out. Finally, he replaced the touchscreen. Lets see how long it lasts this time.

After a year and a half the dishwasher stopped draining. A $231 service call removed the three corn kernels and one watermelon seed that caused. See it all the time says the happy repairman. Another good example of why not to trust GE. Mrs. Gs sales and service complicit in the deceit.

We bought this dishwasher, with third rack and steel tub, after extensively reading reviews online. We went through Home Depot and had to wait a month for the dishwasher to be delivered. We have had it just over a month now and not only does it fail to get all of the dishes completely clean (even when run on heavy cycle) it NEVER dries even with the dry boost on. We never overload it or load it incorrectly and still there are dishes and utensils with food residue after its done running which takes hours. I predict it will rust out in about five years (planned obsolescence). The only feature Im happy with is that it is nearly silent. Not hearing it run helps to not remind me how much money we wasted.

We purchased a Profile Dishwasher, Stove, Oven and Microwave. So far weve had problems with all products especially the dishwasher. The bottom of the dishwasher is filled with water, the door has water running down the front and all dishes have to be dried. I have talked to GE and I was told the new models do not have a drying system as in the past due to EPA. I feel like we have spent thousands of dollars for items that are trash. Had I known I would be drying dishes I would never bought GE products. I would trade this GE for a SEARS in a minute but too late. Ill keep calling GE office, maybe a miracle will occur. Ive tried all the tricks in the handbook... doesnt work.

About a year and a half ago, I bought a GE Profile dishwasher from a very reputable local dealer. Within 3 months, the digital control panel failed. Because it was still under warranty, the dealer replaced the panel. It failed again. This time they made other adjustments, it continued to fail. Finally GE suggested that the dealer replace the entire door panel, which they did. It took the repairman a couple of hours to do so. Still didnt work. Finally GE declared the machine non repairable and replaced it. Unfortunately the men who replaced the dishwasher didnt install quite correctly because it leaks. I keep a plastic container under the front left corner to collect the water every time the dishwasher runs.But the story doesnt end there. This machine and the first one both include a sensor that apparently check for objects that obstruct the spray arms. I dont know because theres nothing that tells me why the machine is beeping when I attempt to start it. I check the spray arms, move dishes, try to start it again and still get the beeper. I have done this over and over and over again and still it beeps. I have essentially emptied the dishwasher and it still beeps. When it does run, I have to use the boost temp. option and the longest cycle available to get dishes, and I mean dishes, even passably clean. Forget pots and pans, or casseroles. So, if you own a GE dishwasher, I hope that you have the old fashioned dishpan and dryer rack handy. Bottom line, it doesnt clean well, leaks, and beeps every single time I try to start it. Buy something else.

We purchased our Adora over-the-stove microwave oven from Home Depot. The Adora brand is made exclusively for Home Depot and were sold on its special functions and value. Well now, 3 years later, this exclusive models glass fogs up when we use it. There are only 2 of us living at home. We use it maybe 4 or 5 times a day. A microwaves typical lifetime is 9 to 10 years. Also, by the way, when we turn on the fan to highest, it sounds like an express train hurtling through our kitchen. Our dog had a heart attack and died the first day we operated it. No he didnt. We dont even have a dog. But you get the picture.

Wow, Donna from NJ, I could have written your dishwasher report! But since I didnt, I have never been so disappointed in an appliance purchase as my new GE dishwasher! Not only are some of the dishes & silverware coming out more dirty than they went in, it takes a ridiculously long time for a cycle. And if there are more than a couple of tablespoons of water on the door, it will pee out onto the floor when the door is closed! Not to mention that there is junk stuck to the floor just inside dishwasher, under the door, after the cycle has run! Yet the worst part is how dirty dishes are after even a Sani Wash cycle! Sometimes, the detergent lid is still closed. Sometimes its open, but the detergent is still there. Even then, dishes may be cleaner in appearance that time, than when the detergent is gone. A water glass, may have gritty stuff - not just detergent stuck and hiding down inside, or more obvious all over inside the glass. I have spent the past year experimenting with various things: detergents, amounts of detergents, arrangements of dishes, heat of water, pressure of water, rinsing dishes before cycle, etc. Glass and pottery normally fare better than plastics, but again the plastic may have started cleaner than they come out! The dealer has been out three times, finding nothing obvious the DW itself, nor anything I have done wrong. He has been told there is a kit that would fix the performance problem, but he cant purchase it, nor can his distributor. I have been told the length of cycle is because our government regulates the amount of water used. So my question is, then its okay to use more electricity?! Its totally embarrassing to serve someone a drink in a glass that is found not clean near the end of the drink! And I, too, have an old 12-years-dishwasher that still works! It was even a cheaper brand. I never had to think where pieces were arranged in that dishwasher. I just thought, in my newly built house, I should have new appliances!

GE over the range microwave Model hvm1750DM1 WW - It’s just about 2 years old. It started making a grinding noise, then quit. No more GE for me.

I purchased a newly built home which had all GE appliances in the kitchen. After 2 years and 5 months, the microwave no longer heats the food. I had a 3rd party appliance repairman come to do a diagnostic evaluation. He informed me that the magnetron has gone bad. To have this repaired would be the same price as purchasing a new microwave. He also informed me that the magnetron should never go bad in such a short amount of time. I contact GE and my warranty was for 2 year so the best they can offer is a $75 good will certificate. What this means is I have to purchase a new microwave and send in proof of purchase and in 4-8 week, GE will send me a $75 rebate check.I am disappointed in the GE product. Their products are now made in Asia (my microwave says made in Malaysia) for cheap labor and the quality has gone down. What is worse is that they do not stand by their product. The fact that something as serious as the magnetron went out in less than 3 years is a red flag that it was not assembled correctly. The microwave is listed at over $500. I would have been happy with GE even paying half but $75 will not even cover the cost for shipping and installation. I am very disappointed.

I was washing the inside of my microwave and noticed that paint was peeling off the top. It looked like paper. Reading the other comments on the same problem I knew it would do any good to contact GE. GE products have always been inferior to other brands in the market.

GE Profile microwave Model: PEB7226SF1SS came as part of the builder installation. In the first year had issues with the microwave not starting intermittently and had to call GE support who sent in a technician who had to work on the door alignment and the switch was the problem which said to have fixed. About 2.5 year from purchase the heating seemed to be irregular which we did not take much notice and then it stopped working completely. We called GE support and did get the usual routine of the product being out of warranty and have to pay for the technician. While scheduling they realized they did not have a their own service person in the vicinity and was advised to reach out to local service person.Local technician diagnosed that the magnetron has gone bad and advised most manufacturers have 10 years warranty on the magnetron as they are supposed to last for a long time and I should reach out to GE. Having reached out to GE support again to our surprise were advised that unlike most manufacturers this product did not have 10 year magnetron warranty. Customer service, part service and customer relations kept redirecting to each other. GE does not provide an option to sell the replacement magnetron to the customer and now want their authorized center to be engaged and paid again to have the part ordered and installed. Disappointed with GE product quality, their stand on warranty compared to their competition and their service which has given me run around and no solution. I have written to them asking for solution which they havent responded yet.

I cook a lot of popcorn in my microwave and it hasnt burn a bag yet. It warms food quickly. Also, it cooks bacon really good. But the best feature is the steam cleaner that saves me time. It steams for about 2-3 minutes then all I do wipe the steam off and its clean.

The microwave is easy to use, performs as expected, and does not need an engineering degree or magic wand to do its job.

Nothing but trouble with dishwasher. GE service is a disaster. Design flaw that is forcing me to purchase another dishwasher. Dozens of call to and from service have not yielded any results. Finally a contracted repair person made it to repair dishwasher and told me it would fail again because of the design. Avoid GE appliances at all costs.

I recently purchased a GD720SGF2WW Serial #HD744674B GE dishwasher. From the moment I tried to use it there was a leak from the bottom of the door. I called for service and when they came the repair man said the door was leaking and there was a repair kit for it so it must be a weak spot in this particular dishwasher, which by the way was not a cheap model and was stainless steel lined. I waited a month for further service and when he finally came he realized he had mistakenly diagnosed the problem and it was a crack in the lining of the door which had gradually gotten bigger as I waited for service. So this NEW dishwasher had been leaking onto my newly installed hardwood floor. By this time I had no faith whatsoever in this dishwasher and said I wanted a replacement. I was called back and told that they would only repair it, which I have been trying to do since NOVEMBER and it is now Jan 21! I will no longer buy GE products and when I called customer service I was on hold for 20 min and finally hung up which Im sure was their intent.

Have had this microwave for about three years, no problems so far. White so it matches our other kitchen appliances. Good size for most uses and easy to clean.

The GE microwave that was installed in our new home (2018) stopped working in June 2020, after the nuclear reactor “blew up”. Which could have been a dangerous situation. I was told by Assurant Insurance Company that it was no longer covered by the 1 year insurance policy, and if I purchased a new policy for $241.00, they would repair it or replace it. After they discovered it was not repairable, they denied the ”replace it” part and reimbursed the money for the policy. GE agreed to sell me a new microwave at a discounted price, which I agreed to. The replacement microwave was delivered damaged, in October 2020. After many calls and waiting hours on hold, service came out and said it was “not repairable“. Again, phone calls to GE Customer Relations and reexplaining the problem, I was told they did not have a microwave in stock to replace it. However, after further searching, one was found, and would be delivered. On 10/23/20, I received a phone call from the freight company that the microwave was being delivered the following day, but they had the wrong address! it was a previous address. Where that address came from is a mystery as we never had GE appliances delivered to that address. The freight company was not authorized to change the address in the system, so another call to GE. I am still waiting for a new microwave! I can’t even begin to count the number of times I have called GE, waited on hold or call-back, waited for service, and been told I have the wrong case number. I have all new GE Profile appliances, all have had service for problems. I will NEVER buy another GE appliance. Their service department and Customer Relations department is disorganized and incompetent. GE appliance are not quality products.

We have had this GE dishwasher model GLD6760N00SS for about 9 years and it was fine, until a few nights ago!! We ran the dishwasher, unloaded it, closed the door and went out. When we returned about four hours later we were met in our apartment lobby by the building manager who informed us that we had a fire in our apartment. It started in the dishwasher, which was off, and destroyed the unit. Repairs will be costly due to fire restoration required as well as the need to now replace more than just a dishwasher. Soot covered the whole apartment, and left a need to get a new kitchen floor and repair/replace some cabinets. Be careful of this model from GE.

Worst experience ever. Bought the dishwasher in Jan 2014. The washer does not wash. Three different technicians have passed by, cant fix the machine. Awful customer service, routine answers, file not assigned, cant talk to a manager.

I purchased this dishwasher 2 months ago and am VERY disappointed with its performance. For an appliance that claims energy efficiency it is a total failure. My last dishwasher was a Kenmore that I had for 15 years. It outperformed this thing in every aspect. Since purchasing this dishwasher my water bill has gone up and my energy consumption has gone up. Why? Because I cannot put plates close together in this energy hog or they will not get clean. I have to do twice as many washings as I used to for the same results. This piece of junk has NO WASH PRESSURE! All the dishes must be pre-washed in the sink to assure satisfactory results AND I must use the hot water boost or they will not get clean. Energy wasted doing a pre-clean and energy wasted with hot water boost - bad combination! This product is taking me backwards in savings and environmental damage.

We purchased a GE over-the-range microwave oven last November 2010 and it was installed in February 2011 when our addition was finished. Last week, it decided to stop responding to instructions. When the door is closed, it just continues to run--the turntable turns, the light stays on and the fan keeps running. It will respond to instructions, but when we want to shut it off if the door is shut, we have to unplug it--which is a real pain because it is over the range.We have an old microwave that was my wifes parents and it still works fine even though it is about 20 years old. The new one stops working in a little more than a year which is not acceptable. We contacted GE and were told that we would have to pay over $100.00 to get the thing fixed. I dont think so. We will not purchase anything GE again.

I have a newer (one-year-old) but base model GE microwave. I wasnt interested in lots of features, like convection cooking and such. I only use it to reheat coffee, occasionally heat a frozen meal, etc. It functions as designed, and Im very happy with it.

Beware of GEs scam! My new house came with a GE microwave oven model JVM1630. It no longer heats food so I called GE repair. Heres basically what they told me: It is likely the magnetron tube and it is still under warranty, so no charge to replace it but I would have to pay $99.95 for the repairman to come to my home to diagnose the problem. If I decided I didnt want to repair the microwave, I was offered a $100 coupon toward a new one but it had to be a GE and it had to be bought on their website only. If I decided to go ahead with the repairs, the $99.95 would be deducted from the bill and I would only have to pay for additional parts and labor. I repeatedly asked for a ball-park labor charge so I could make an informed decision as to whether it was cost effective to have the repairman come out or just get a brand new one elsewhere. The person on the repair line hung up on me! I called back and I was told the same thing; that no one could tell me what the labor cost estimate might be. I asked to talk to a supervisor and same story. I didnt schedule a repair because I was taking a long trip and wouldnt be using the microwave anyway. When I returned from my trip, I called GE repair and again they wouldnt give me a ball park figure. Frustrated, I decided to have the repairman just come out and repair the darn thing and an appointment was scheduled for the next Monday. I had to rearrange a Monday day trip to Wednesday and set the repair appointment. On Monday, it was starting to get late in the afternoon, so I called to find out if the guy was on his way. A recording said my call was noted and I would be receiving a follow-up call. About 10 minutes later, Kim in dispatch called to tell me she had to reschedule the repairman to Wednesday. I explained I already had an appointment on Wednesday. which was already changed because it conflicted with the repairman coming to my home. She told me the repairman couldnt come because his truck wasnt safe to drive so that whole day was shot. The appointment was rescheduled for Wednesday and I had to again reschedule my other trip. When the guy finally showed up on Wednesday, he told me to put a glass of water in the microwave and start it. Ten seconds later, he declared it to be the magnetron tube. He was at my house about 10 minutes, just long enough to take my $99.95 credit card payment and to give me an estimate of $246.90 to repair the microwave which included the free magnetron tube, a $20 part plus tax and labor. The estimate had instructions on how to get the $100 coupon if I decided to buy a new GE microwave, which he said is what most people do. He didnt seem like he came prepared to repair the microwave at all. I was so frustrated and already out the $99.95, so I told him to go ahead and repair it. He said I should call repair to schedule him to come back to repair it! I told him to just repair it now and he said he didnt think he had a magnetron tube in his truck. I asked him if he would go to the truck and check! He did, and nope, no tube and he left.I think this is a great scam GE and maybe others have going. Its entrapment. They get you to accept a repairman to come to your home and charge you nearly $100 for it, but give you a coupon for $100 for a new one but it has to be a GE and can only be bought from their website where they can go as high as $500 or $600. By the way, I got on the website to find a replacement. My model had been discontinued and the only one in my price range was also a discontinued model. They charge $75 to come out to install it and another $30 to take away your old one. I called local appliance stores to see if I could unload my old microwave for parts and they all said the same thing: stay away from GE products.

My GE microwave just 3 years old, from inside started coming off. Called the company they say its normal and harmless??

The jvm3160 series has a known defect in the door interlock electrical system that blows the unit fuse if the door is opened while the mw oven is operating. This usually occurs after the warranty expires. Cost to repair can exceed the original cost of the unit. Mine failed in warranty but it took them 10 weeks to fix it. The reason it took so long is that GEs repair protocol calls replacing the whole door (which has NO electrical parts in it) instead of replacing just the latch assembly because the labor cost to replace the latch itself exceeds the cost of a complete door assembly. Door assemblies were on back-order because of the high failure rate.

We have had this microwave GE JVM1631wb007 (2003) for a number of years installed above our stove. It was given to us by my husbands son so we did not have it registered with GE as owning it. However, I just sent an email to GE today asking for help as I find absolutely nothing on the internet about a scorched outside microwave door. We have had no issues with it whatsoever - until now. When we returned home from a one week vacation this past Sunday evening, we came home to a scorched OUTSIDE door on this microwave! The inside is fine. The two people who came into the house while we were gone said they did not use it but it is DEFINITELY scorched around the entire area on the outside around the screen area. I refuse to use it although my husband (who is an appliance repairman but does NOT work on microwaves) says its fine to use. Its not only hideous, it LOOKS unsafe to use. Im scared its going to catch on fire but my husband says dont worry and go ahead and use it! Im attaching a pic of it... Anyone else heard of this? Its not like we dont have the money to replace it. Im NOT going to touch the thing... You cant tell him anything. He thinks its fine. I need PROOF that this is dangerous to convince him... Please help before the house burns down!

I brought our brand new home just over 1 year and 8 months ago with all new GE appliances. One of the GE Smart Built-In Double Wall Ovens, the bottom one which we never use, but the inner glass shattered randomly, very dangerous and they want us to pay them $100 for the inspector visit and then more for the par and service $325 for the replacement, the GE is disagreeing they had a defect on installations. That is an experience that we never repurchase GE brands, my friend had the same issue. They replaced in their house this way without warranty, however they disagreeing our oven had the defect on installation, lesson learned, never never buy the GE again!

My GE Washing machine did everything it was supposed to do, especially in cleaning clothes and very few if any machine problems and they last years and years, mine was 15 years old. It kept surprising me because it ran so smoothly, truly cleaned my clothes and ran forever. The Dryer couldn't keep up with my old washer, had to buy a newer more expensive machine that couldn't dry at 8 years old. I loved my reliable GE washer.

GE Profile Microwave wall oven combo model PT970SOM1SS - We have a few years old unit very gently used. However, we now have the paint peeling and flaking from the top and back interior wall of the microwave. Some spots have bare metal exposed. Contacted GE and they told me there was no fix for it other than replacing the device. Now they cannot replace the Microwave alone. The whole unit has to be replaced at a cost of ~ $2800.00. This is ridiculous. There should be a recall as there are several other complaints about similar issues.

My GE Profile dishwasher is now 4 years old and Ive put up with it not cleaning well. For the last 3 years, I get a cloudy gray film over the dishes and finally figured out what is happening!! There is a gray rubber/plastic border around the bottom screen piece that has all the holes in it and covers most of the bottom of the dishwasher. I gently scraped with my finger and lo and behold its like gray putty!! So, the whole border of this gray rubber/plastic is disintegrating!! I had a 4 year warranty from Sears and they sent out a repairman. He is just going to order that whole screen part and replace it. He scraped the rubber and it came off for him too!! He said he never saw that before. He said it is probably the fault of my detergent which comes from health food stores and NOT the Cascade that they promote. Anyway, now I know where the gray film is coming from... Weve probably been consuming this for 4 years, a little at a time (NOT GOOD)!!! Im not thrilled with Cascade either!! Probably my LAST GE product to buy!!

I just moved into a senior Community and the GE Dishwasher was already here. I moved from a condo that also came with a dishwasher, a GE, new. It was builder grade and I hated it. But I am really enjoying my GE in my apartment! This one cleans very well and is quiet. I like it a lot.

Purchased a GE 650 dishwasher which we quickly discovered has terrible racking for North American dishware. Also the control panel is overly complicated yet limited to use (always flashes settings even when not in use). Once you figure out how to load dishes into the very tight/ narrow tines they fall over and chip/break. When investigating the dishwashers by GE made in China/Taiwan etc all have same issue. The ones made in USA by GE have wider and longer tines. We have had MANY dishwashers over the 40 years and NEVER had one as bad as this.When calling GE customer service the senior rep was not willing to offer any customer satisfaction as nothing technically was wrong. At one point she stated we had made the purchase so live with it even though it was the wrong choice. We offered to pay for any cost difference, etc. When questioned about GEs interest in customer satisfaction she stated that was not a warranty issue. She was not concerned about a satisfied customer. With that, we will not be purchasing another GE product or its affiliates. What a waste of money.

Dishwasher is 3 months old and today is the first time it has worked! GE has sent repair techs 3 times and finally today the unit was temporarily repaired with electrical tape attached to the brand new door latch. The door latch is cheap plastic and has a manufacturer design defect of being too small to properly engage the unit when the door closes, thus not allowing the cycles to start just a series of beeps. No other manufacturer uses a cheap plastic door latch designed like this but GE! Piece of crap, dont buy it!

My 3 year old $600 GE micro caught on fire with nothing it. I set the timer on my top of the line GE microwave for a reminder. Nothing in the micro, cooking nothing! When I came back it was on fire! Melted the inside. If I would not of been there it would of burnt my house down! The only way to shut it off and put out the fire was to turn off the power to it. The next day as soon as I turned the power on my GE microwave started on fire again!!! This must be happing to many people and needs to be addressed by GE! This company needs to be held accountable for burning houses down!

I bought a GE Adora dishwasher from Home Depot. There is nothing technically wrong with it - in other words - it is not malfunctioning. It is just that its normal operation is AWFUL, in my opinion. The PROS: it is very quiet. The CONS: it does not clean your dishes! And since this is the primary function of a dishwasher - I would say it is a complete failure. Originally, I had hard water, and I thought that was probably the issue. I purchased a whole home Kinetico system, which remove almost all particulates from the water, and makes bottled-water-quality drinking water. (On a side-note, I would TOTALLY recommend the Kinetico system!) But even after having the water issues fixed, the dishwasher has NEVER worked properly. I have used every type of dishwasher detergent, including Cascade Complete & Platinum, Finish Ultra & Quantum Powerball... and I have also added rinse agents etc. Basically - whatever state your dishes are in when you put them IN the dishwasher, they will only be slightly improved when you remove them. Even if you SOAK the dishes first, they come out with all kinds of residue. It does an especially horrible job on glassware, but silverware is also terrible. And I have to re-wash by hand every coffee cup that comes out. I truly loathe this machine, and will replace as soon as I do enough research about a better brand & model.

My GE microwave is not complicated to use. When cooking prepackaged dinners it cooks perfectly in the time the food instructions say it will. I have used other microwaves that the food is over or underdone. No problems with defrosting fruit either. I am very pleased with cost and performance.

We bought Cafe series appliances less than 4 years ago including dishwasher, fridge, stove and microwave. These are not cheap appliances. We also bought a service contract with them. When our dishwasher broke a couple of weeks before Thanksgiving, we called service to have it looked at. After 3 trips and over a month later the dishwasher is still not fixed. Each time we tried to make an appointment we were always given a date 1 week out and a 4 hour time window, but each time the technicians showed up late and once even 3 hours late despite the 4 hour window. The fact that after so many visits and part replacement the dishwasher is still broken says a lot about the quality of the product and its maintainability. All customer representatives work like zombies. The problem with GE lies within the culture. Nobody cares. The service contract is a total waste money.

I recently had a service tech out to repair my dishwasher. Before I knew it, he was opening the unit and found a tube looking piece stuck in the unit. He was at my house for 15 minutes and the bill was over $250. He should have asked if I was okay with the procedure he was going to perform and the cost before proceeding. To make matters worse, the dishwasher is not cleaning dishes now. I sent a prior email to GE a couple of weeks ago with no response. I would have never spent this money if I had been given the option and certainly now I have been charged for a repair that actually made my unit worse than before since it is not cleaning the dishes like it did before the repair. I respectfully requested that my money be refunded and/or be given a credit towards the purchase of a GE appliance and have received no response. I tried calling and have been on hold for over 30 minutes now with no one picking up, despite the fact that hold time stated estimated wait time was 5 minutes.

We purchased a GE microwave/convection oven which developed peeling on the inside top of the microwave. GE contacted me and offered a replacement ($300 toward a shelf model or prorate the microwave/oven). Why would we take $300 replacement when we paid nearly $3000 for this oven???? So we took the prorated one directly from GE. We felt confident that we would not have a repeat of the problem. The oven was manufactured in December 2012. After it was delivered, I noticed a rough area on the turntable; and after the oven began to peel AGAIN on the second oven, I believe that the rough area was due to a remanufactured part on the oven.Now we are stuck with another microwave/convection oven combo with the same issues as the first oven. I never used anything harsh to clean the oven and now this happens again. Why cannot this company manufacture an oven that will not have defects in it??? I am tired of peeling paint on a second oven when I have done nothing except pay them for 2 ovens. Why cannot they use stainless steel interiors, and this would stop the many complaints that people make about the product. I would NEVER again purchase another product from this company. The products I have purchased have been inferior. I paid for two microwave/convection ovens and still have one that is inferior!!!!