Very easy to clean. Also, very reliable product. Its a built in above the stove, various levels of cooking and I love the 30 sec button. Black turntable with built in clock. Ive owned several GE products and find them very easy to work and user friendly.

GE microwaves are crap. In fact its not restricted to microwaves. Its their ENTIRE line of appliances. They team up with other grade e or f manufacturers for appliances (ie: LG, Samsung) and ANY GE appliance is almost guaranteed to fail prematurely. I see all these comments bucking Malaysia and in all reality the fact remains that Malaysia makes damn good stuff (think SONY). But it is the COMPANIES that build the products and how much theyre getting paid that factors quality. No doubt that GE is using the bottom dweller rejected off the assembly line parts to build their units. Most are Chinese garbage. China also builds some very reliable products but as the saying goes dumb American will buy anything. They save the best for them and sell us the crap.It is the lowest grade of those already should have been scrapped at the factory parts that GE passes off as quality and they do a good job at showing it. A cheap 30 dollar China made Emerson microwave made by Daewoo (Korean company that actually is decent) lasts longer and takes a hell of a beating compared to the overpriced rejected junk we call GE. The GE ac units are another classic example of pure garbage. Sadly the older GE works forever. That should sum it up. Why didnt the GE executives while visiting Thomas Edisons grave make every effort to step away from his grave and not stand upon it? Because Thomas Edison would pull them under.

I pushed the oven cleaning button. After about 2 hrs I noticed smoke coming from the stove and the island where it is installed. The door would not open and the oven just got hotter and hotter and smoke was filling my house. I called 911 and they sent the fire department. After disarming the breaker, they removed the stove. I purchased the stove in 1996 but only used the auto oven cleaner a few times. The model # is jsp40 and serial # TR244121R. If I had not been home my house would have burned. GE you should do something about this situation. I have no receipt or order #. I purchased it too long ago.

I bought a GE Profile dishwasher and have the same problems of residue on the dishes. My dishwasher is only 4 months old. I paid top dollar to get the same line as my refridgerator. This dishwasher should clean the dishes sparkling clean for what I paid for it. Disappointed in Cobden

Sometimes there are dishwashing detergent (powder) left on the dishes. Nothing extra, very basic, it has regular or pot scrubber cycles, air dry or heat dry, a slot for dry rinse liquid, detergent slot, short wash cycle, upper rack, lower rack and flatware basket. Came with the house purchased 17+ years ago. White body with black upper control panel the entire width of the dishwasher. It is still in very good condition, but then I take care of everything, always rinse everything before placing them in the dishwasher. Never needed service yet.

It is a ten year old microwave and it works fine, looks dated and Ive never liked the start buttons location. We bought at the time of our kitchen remodel, good size and power for the money. Im sure newer models are just as good if not better.

The interior paint on the microwave is peeling causing there to be sparks in the interior of the microwave. The microwave interior paint is defective and should not have peeled. The microwave interior has metal showing which causes sparks.

Our GE microwave is 20 years old and still works great! Still looks pretty good too!! We do have a small crack and the start button is worn, however, we use it several times daily. Would definitely buy this brand again.

If you have a choice, run away from GE like the plague, because if you have to make a warranty claim, it may become a nightmare. I purchased a new home May of 2015, and my wife and I paid for the appliance upgrade to the GE Profile, which werent cheap. Less than 2 months I noticed that the microwave had a burn spot on the bottom of the door where it sits against the exterior of the microwave, the paint was burnt from the metal, and the rubber seal melted. I did not think too much of it because the microwave still worked and unless you opened it you did not see it, so it wasnt so much of an eye sore. Fast forward to January 2016, my wife informed me that the microwave stopped heating, and that she was going to put a ticket in to New Home Warranty, I informed her that we probably need to go to GE directly as I knew that is what they were going to say. So I called GE and put in a Service ticket. They informed me that it was going to be a little over a week before anyone would be available to come look at it, to which I was OK with. The repair guy finally came. I explained to him in detail what the issues were. He opened the microwave, closed it back, wrote some things on his computer, and told me that he ordered a part called the magnetron tube, which sounded like something from the transformers. He told me it would be a week before the part would be ordered, so I asked him if it wouldnt be easier for them to just replace the microwave. He told me that it is a warranty repair and they have to try and fix it first and if not, then they will. The evening before the repair guy was supposed to show up to change the door and the magnetron tube, I got a voicemail stating that the part will not be received until the evening of the repair, so they rescheduled me for 2 days later. GE just assumed that I would be available, because I probably sit at home all day waiting for service repairs. I called back the number to see what was going on. I was adamant that they replace the microwave, because by this time it was already 3 weeks without a microwave. And with small kids in the house it was very annoying to have to put a pot on the stove every time you needed to heat anything. After 45 minutes, I was still nowhere with them, so I ended up sticking with their new appointment window. I was leaving for work 2 days later when I noticed the repair guy at another home in the community. I thought to myself why couldnt he have done our repair the same day if he were already going to be in the neighborhood? About 45 minutes later my wife called me and told me that the repair guy showed up to repair the unit, that they were supposed to repair a day later, only to be told that the damage on the door was caused by arching, and that it will happen again so the microwave is non-repairable, so they will have to replace it. He told my wife that she will be receiving a call from the warehouse within 24 hours to schedule the replacement once the microwave is available, but she could call the warranty repair department to see if they could expedite it. After another 25 minutes on the phone going back and forth we were told that it will be about 7-10 business days before the microwave may be available. Now it is good to note that the warehouse where they stock the product is only 2 hours away from where I live. So by the count of it by the time we receive a new microwave, it would have been about 5 to 6 weeks from the initial call to get the issue taken care of.

Our new GE dishwasher is a disappointment. 1. There is water on the door after the dishes wash. 2. There is soap on the door after the dishes wash. 3. The silverware is often dirty after the dishes wash.I have observed the following: 1. The reason for the water is the silverware trays are made of plastic and do not dry. They should make them of coated wire like they used to. 2. The soap tray is often prevented from opening all the way by the silverware in the rack. They should re-design the bottom rack. 3. The silverware tray is too enclosed for good cleaning. It should be made of coated wire like they used to.

GE Model WES1130DM2BB MFG APRIL 2011, bought Oct 2011 @ SAMs Club. Microwave continues to run after cook time and will not stop until unplugged! Service Dept offers a $25 discount on a new GE Microwave after cutting cord & sending info plate in. I am concerned this microwave will cause a fire! Luckily I was near and unplugged it!

I have been trying to get this dishwasher to work since April. I have had it serviced 2x and yesterday the board was replaced. Soon after the dishwasher started to say the same thing again. Press start and the cycle is paused and will start in 3-2-1. it does not start but repeats and beeps over and over. I have done everything in my power to get this rectified. It will run out of warranty in October and I havent been able to use it. As a consumer I am demanding a usable product that I spent my hard earned money on. Here is the model CDT875P4N2W2. I will go to any lengths to get some attention in this matter and I hope Consumer Affairs can contact GE Corporate for me.Dr. David ** Lewes Delaware

The first GE microwave never worked right out of the box. I took it to school and let my Physics students (I am a science teacher) tear it apart and find the trouble. The magnetron was broken. Since it could possibly have happened bringing it home, I decided to let it go and went and bought a new one. This one is less than a year old and has the very scary habit of coming on by itself. When I go in there, it says it is defrosting, or beverage, or any number of reasons. Tonight, I will unplug it, chunk it, and go buy another microwave. One can bet that I will never buy another GE product.

July 4th, 2010 - GE Profile Dishwasher, Model: PDW9200N00BB, Dishwasher had been humming after cycle was over for a little while, this night I walk into the kitchen late and find it full of smoke. Circuit board has a hole burned though it and wiring harness is melted. Never tripped any safety, could close the door and it would come right back on, smoke and all. This model was not on the recall list but I called GE anyway. After describing the fire they send someone out, then they send a new dishwasher out and install it. I assume they wanted the old one to look over or just to get rid of it. New washer installed the end of July 2010, new model number PDWT500R10BB. Today is 2012-02-02 and the new machine would not stop at end of cycle (Got down to 1 minute and stay there for at least 20 minutes before we turned it off). This machine is now making the continuous hum after the cycle stops that the old one did before it caught on fire.Called GE, they said they could maybe go half on parts and service until they checked where I was located. (Wichita, KS. Area population 500,000+) They said that they didnt send factory techs to my area and I would need to contact a local repair service. I pointed out that they had a factory guy for when my machine was on fire and they said it was just a malfunction now, so they could not. No half on the price for repair either at this point. This is a $1100 to $1200 dishwasher with, as near as I can tell from complaints online, a history of going up in flames. I understand things break etc, but when you continue to put out products like this and then refuse to remedy the problem, I and anyone who will listened to me will never own anything GE again.

This review is of a low end dishwasher with simple controls. It has a plastic tub. The racks seem poorly designed. Bowls are hard to fit in. It cleans competently if it has hot water when it starts and a high quality detergent. Its basic and does the job. Pretty quiet too.

I just found the site for the review on 5/17. Ive had two GE Cafe microwaves model CVM2072SM3SS purchased at the same time for the two kitchens in the house. The microwave in the in-law suite lasted one year and I replaced it with a very economical one which has been fine for 3 years. The electrician could not repair it. The microwave in the main kitchen is 5 years old but it stopped working (same issue of frozen panel) after 4 years. In Nov. 2016, during Thanksgiving weekend, it froze and stopped working. I looked on YouTube and we cleaned the terminals in the panel using alcohol. That worked for 2 months. When it stopped again I tried the same remedy but it did not work. The panel lights up, but it will not respond to any commands. After 7 months of it being inoperable, I decided to either fix or replace it (while using a way cheaper GE from a friend).This is an abysmally poorly engineered VERY expensive microwave. The LED panel is a disgrace! Do not buy CAFE microwaves. Im out $1500+ (for two) plus the replacements, the aggravation, the ugly looking counter with the loaner from my friend. I am ready to bite the bullet and buy a microwave that fits the style of my kitchen. It wont be a CAFE! Although it is a set... Enough is enough. I give up.

GE Cafe Microwave CVM2072SM2SS - The touchpad stopped responding, like many other who have had this issue. GE would not give me a break on replacing the main and supporting circuit panel as suggested by the technician, so I had to pay out $500 on my own. After less than a year now the microwave wont heat. I liked the units looks and display but if it wont work, its useless.

My microwave is 2 years old and stopped working on Thanksgiving Day. Customer service was very responsive to send out a repair person. There was a minimum $108 charge plus and time spent. It turned out to be a loose wire inside the machine and I was charged another $50 for him to tighten it. Machines should go longer than 2 years without a service call and I will buy the extended on any other GE I purchase.

This dishwasher was brand new in our new house. It didnt work right from day one. GE service came out 3 times to repair. The first 2 times the GE tech was here all of 5-10 minutes and didnt repair it either. The 3rd time the tech actually pulled out the dishwasher and found the problem and fixed it. Their customer service was terrible.

We were super excited to get this GE Profile Cafe dishwasher. Minus the brand, it was the exact design/style as the one my dad has which we love! First issue, dont have a name of a dish liquid if you cant use all of them. Cascade apparently makes different detergent styles for the smart dispense. Dishes were ridiculously dirty and the horrible thing is I couldnt find an answer why on GEs site, I had to go to a handyman site. That was about a month and a half ago. Today, I did the dishes and, of course, let it do its thing. I always have the heated dry on by the way. Well, dinner came and I grabbed some dishes out which were screaming hot and I had to use an oven mitt. I didnt think anything of it because sometimes Im a sissy about that. Well, its now 3 hrs later and I get up to the smell of burning plastic. My first thought was that the sippy cup straw fell on the heating unit. I did not, however, expect to open it and see the Tupperware melting, the silverware rack melting and the water bar to be melting to the heating unit and it being so hot that I have to use an oven mitt just to touch the freaking rack. Oh! And by the way, we bought this off Craigslist last year and it was brand new. It still had the casing around it from the store.

The microwave overall is good. It looks very good. I think that the price was good as well. I would certainly recommend this item as an item to buy. So far it appears to be well built, I have not had any problems with it.

The wheels to roll tray in and out comes off sometimes, other than its fine, average wash cycle. Doesnt really clean heavy food off dishes so have clean first then put in dishwasher.

Ive had a GE model #JKP68G microwave oven for the past 27 years!!! It has been absolutely fantastic!! I love GE products and how reliable they are. Theyre the best!

I rarely use it. I know to avoid too close to the signals produced in the microwave and use it only about once a month.

Less than three years ago, I purchased a microwave oven wall unit to replace an existing unit. Due to the size of the built-in cabinet, I was limited in choices. The cost of the unit was $2400. A few months ago, the interior wall of the unit began rusting and the enamel is peeling. I contacted the customer service dept via e-mail on their site. I was asked to send pictures and then informed that I should stop using the unit immediately due to the danger of arcing. I was also told that because I did not purchase the extended warranty, the best that GE could offer me was a new unit for $800. I asked for names of warranty companies and was given one name and number but told there were others that also offered the same service. I called this company and they clearly told me that the peeling and chipping was a manufacturer’s defect and would not have been covered by an extended warranty had I purchased one from any company. Then I contacted the GE repair service center and spoke with them. The man who answered explained that this is a cosmetic problem and that there was no danger of the microwave arcing unless there was less food in the microwave than the size of the area that was chipping. I am very disappointed in the response of GE, the pressure placed on me to make a decision in 7 days or the offer would be withdrawn, and the fact that the service department and the consumer service (complaint) department gave me entirely different responses to the same information and problem. I will probably have my cabinet rebuilt to avoid having to replace this unit with another GE appliance. Who would pay $$1600 for the use of a microwave/oven unit for less than three years? Unfortunately, GE seems to be the only company that makes a unit that fits the existing cabinet in my kitchen. Disappointing to say the least.

My GE Profile Dishwasher is a plain Jane without the bells and whistles, yet is a trusted, working appliance. Honestly, the only beef I have with this model is that plastic articles do not dry completely unless placing the controls on Heated Dry, and leaving the dishes in the dishwasher for the entire drying cycle. I have had my kids place some dishes in the dishwasher, caked in day old food. I left the plates in the dishwasher, hoping to teach my kids a lesson about rinsing off their dishes before placing them in. Imagine my surprise when after running the dishwasher through its normal cycle, the plates came out spotlessly clean! Impressive!

I bought the Cafe dishwasher model #CDT855P2NS1, for $995, it arrived defective with the wrong size parts inside causing the door to not shut properly (as inspected by GE repairman). This was over 4 months ago. Since then I have been told to call every two weeks to see when a replacement model would be available in the warehouse (each of this calls required sitting on hold for over an hour). Despite having many of this model dishwasher for sale on the GE website, I have been told for over four months to call back in two weeks, because none are available at the warehouse and this is the only place you can source them from.Now I am being offered the price I paid for the dishwasher despite the exact replacement now costing $1,277, from the same place as the previous one was ordered from. This doesn’t include the $149 to install the new dishwasher to replace the defective one that was initially installed, which I am being told will not be reimbursed. I just want to warn everyone about not purchasing this product or expecting any support from GE.

This microwave (jvm1540dm5ww) works fine but the plastic door is fracturing into bits. I expect this is because of faulty plastic in China. Cheap alternatives for fast profits. The machine is out of warranty. Replacement door is almost 160$ with shipping. Planned obsolescence by corporate America. This machine works fine but is a waste because I don’t trust the replacement materials to be any more stable. I rated this a two because the actual operation is fine. Sorry GE. I will not buy your brand.

Purchased a microwave 5 weeks ago. When cooking it smells like something is burning. GE would only issue a goodwill certificate. Now Im forced to buy another GE product. After taking the cover off its clear that one of the connectors actually melted. It bubbled up and turned black. Because of this and the fact that other reviewers had the same problem. I dont want to buy another GE product. I dont think its unreasonable to get a refund since its only been 5 weeks. If I have purchased at a different store with a longer return policy I would be able to just bring it back to the store. Apparently the quality of GE products has gone down. I would not recommend.

My GE Adora microwave is about 6 years old and for the last year it has had an issue with moisture in-between the glass front door. It was streaky and now I have cloudy blotches. Called GE repair and it would cost close to $90 just for service call not including parts/labor. Think twice before purchasing this microwave. Not a happy consumer.

I purchased a newly built home which had all GE appliances in the kitchen. After 2 years and 5 months, the microwave no longer heats the food. I had a 3rd party appliance repairman come to do a diagnostic evaluation. He informed me that the magnetron has gone bad. To have this repaired would be the same price as purchasing a new microwave. He also informed me that the magnetron should never go bad in such a short amount of time. I contact GE and my warranty was for 2 year so the best they can offer is a $75 good will certificate. What this means is I have to purchase a new microwave and send in proof of purchase and in 4-8 week, GE will send me a $75 rebate check.I am disappointed in the GE product. Their products are now made in Asia (my microwave says made in Malaysia) for cheap labor and the quality has gone down. What is worse is that they do not stand by their product. The fact that something as serious as the magnetron went out in less than 3 years is a red flag that it was not assembled correctly. The microwave is listed at over $500. I would have been happy with GE even paying half but $75 will not even cover the cost for shipping and installation. I am very disappointed.

Its been more than 2 months that GE repair has been TRYING to repair my 4 month old dishwasher. 4 service calls, 3 wrongly ordered parts, GE blaming repair company, and repair CO. blaming GE. The repair company on their 4th visit told me wrong part again and that they refuse to come out anymore. They lost enough money already. When talking with GE consumer Dept. promises of a call back by a manager has been non existent, now they wont even return my call. I have a 5yr extended warranty on the dishwasher and I cant seem to get anywhere with the factory warranty. GE by far the most unprofessional company I have ever dealt with. They were happy to take my money for 4 top of the line appliances, after that youre non existent to them. Its a shame that legal counsel is what seems my only avenue. Will never consider buying GE products ever again.

GE Dishwasher model #GDF610PSJ5SS stopped working (would not even turn on) a little over 3 months. Because it was purchased over a year ago for a spec home we purchased, GE would not honor the warranty even though we had only purchased the home 3 months prior. Repair, if possible, most likely would be more than buying a new one. Recommend avoiding GE products. This is our 5th home, never had problem with other brands in previous homes!

I have had two service calls on this dishwasher (Model Number GDT65SMJ0ES) and it is 18 months old. The first was to replace the heating element, which was under warranty. The recent problem was a cut-off switch that will trip when needed. The technician hooked up his computer to turn it back on, a very quick procedure, and it cost us almost $100. This unit should have a trip switch like a vacuum or garbage disposal so that the owner can do it themselves. After that, if the dishwasher still doesnt work, then a call for repair could be made. By the way, the repairman was very nice and respectful to us.

I purchased this in Feb. 2013. Just before the 1 year warranty was up the control panel went out. They came and replaced it. Now just a little over a year of the replacement, the control panel went out again. Worst microwave hood fan Ive ever had.

My GE microwave, has been running fine, but the door handle has cracked on the bottom. This is the second GE microwave that I have purchased in three years. They need to do a better job with the door handle. I will never buy another one.

This is the second time that my GE microwave oven is peeling the paint on the inside of the oven. We paid over $240.00 the first time and think that this is a serious flaw this particular oven has. I think that the company should be liable, not the consumer.

I bought a new house and within 2 years my GE dishwasher and now my GE microwave jvm1750sp1ss need replaced. Ive got a cheap $100 microwave in the basement thats worked for years. GE quality has apparently went downhill. NEVER again. Cannot believe appliances that cant even last 2 years.

I never imagined that a microwave in my new home would be rendered useless after 2.5 years. Like many of you, my control panel stopped working and the floor of the oven was extremely hot to touch. Heres the weird part. You can hit the number for timed cook, but youd have to let it heat the entire time. If you open the door, you cannot restart it. You have to unplug it to reset. Of course, I called GE customer service, who gave me the same spiel about $80 service call, plus repair and parts. Thanks to your candid remarks, I will not be purchasing another GE appliance.

I have a GE microwave manufactured Nov. 2013, model #JES1456DS1WW, Serial # VA201954 L. I purchased it at Home Depot. I have had it about 2 years. Suddenly it started flashing PF. I unplugged and plugged, and reset the clock several times, but it continued to do this, about 2 days, then just stopped working at all. The GE website listed on the product proclaimed GE Cares; I couldnt seem to find anyone who did despite numerous calls. The only question I had was if happened to be any troubleshooting re my problem--I dont think they cared...

Purchase a GE microwave Jes1142sp2ss on December 2014 from BrandsMart. The paint on the bottom of the microwave is peeling off exposing the metal. I have never ever heard of this happening on a microwave. I will never buy another GE product.

I was very impressed by the look of the GE over-the-range microwave oven but my impressed state faded not too long after I began using the oven. My typical usage ranges from heating something for 20 seconds to soups for three to four minutes. Within the first month of purchase, the paint on the floor of the oven was peeling off, exposing the metal color. I was only wiping/drying out the oven with a soft cloth, never using an abrasive product or cloth, so the peeling paint was only due to moisture. I have now owned the oven for just over 14 months and not only is the floor nearly completely devoid of the white painted surface but I just had a quick fire when thawing frozen onion chips for 10 seconds. My previous, much less expensive microwave lasted nearly 7 years, so its a shame that a supposedly better model cannot match the longevity of the GE model. Looks aside, I would not recommend a GE microwave oven to anyone looking for a new or replacement microwave.

I had a blow up with my GE microwave which came with 2 metal racks. I used the rack once and the microwave flared up as if I had warmed something on aluminum foil. I removed the racks. The microwave is 2 years old. Last week I warmed a chocolate chip cookie on a paper plate for 10 seconds. Immediately the microwave flared up, the plastic bracket that the shelf rest on burned and melted. I was lucky no one was hurt or a fire resulted. GE came to inspect the microwave and offered to replace it for $258.80. I am arguing with GE. I want them to replace it free of charge. Their own technician tells customers to never use the metal shelves. I maintain that the design or brackets are faulty and GE should stand behind their products. This microwave was always used correctly. Do consumers have any rights at all?

After a year and 1 day of use the microwave blew out and got in fire. Fortunately I was nearby and was able to extinguish the fire. I called the customer service that told me the warranty was over and all they can do is give me a discount on the purchase of another unit, and that I was on my own for the collateral damages due to the fire!

I purchased a full suite of GE Monogram Appliances about 5 years ago. All are fine except the microwave which was made in China. The back is rusting out, the inside is chipping at the door and moisture builds up in the door window. This progressive deterioration has taken place over the past 5 years. I paid $420 for the microwave plus $226 for the trim kit. Now, all GE wants to do is sell me a new unit and a new trim kit (will not fit old trim kit). I paid approximately $20,000 for the entire group. I bought GE because I trusted the name. Im stuck with GE if I want to match the remaining appliances. There are only two people living in this house so there is only minimal usage. To further complicate things, there is no serial number on the tag.

As a landlord I have about 20 GE microwaves. I have had 8 handles break off in the last few years including the one in my house with me pulling the door open. Standing straight in front of it, just pulling regularly. Replacement plastic handles - just two pieces of injection molded plastic - selling from other companies for as little as $10 are $130.00. $130.00! There is a clear design defect here and the companys solution to it is to charge $130 for the plastic replacement part. Someone should go to jail. Literally. Please include me in the class action lawsuit.

My ancient GE Profile Spacemaker II Sensor microwave, the successor to its predecessor, is consistent, great performance, reliable. I chose this model because I was happy with its performance. But it could be less chunky. I would like to remodel my compact kitchen, and a sleek newbie non-chunky GE Microwave Oven would be awesome!!! :)

After 22 months of use, the microwave stopped heating. Youll see the same problem all over the internet. Lights turn on, plate spins but no change at all in temperature. The repair call was estimated to cost more than the price of the microwave. Its almost like it was planned. Never buying a GE product again.

We lost our old refrigerator to a lightning strike and had to get a new one ASAP, and it had to be counter depth, a great ice maker, side by side, and not be a SS finish. My wife and I hated our old SS one but liked everything else on the old unit so we went looking for a new one that met these requirements. What a chore, this was not an easy unit to find as most everything now has a bottom type freezer. This was defiantly out of the question.

I own a GE counter-top sensor microwave oven model #JES1451, which was only 2 years old. At 3:00AM, I woke to a room full of smoke and a burning plastic smell. I immediately rushed to the source which was my microwave oven. It was going by itself and the panel read sensor error with smoke billowing out of it and flames erupting. Luckily, I had a fire extinguisher handy. I had never had any problems with this microwave prior to this experience. I cringe at the thought of what could have happened to my home and my family sleeping upstairs if I hadnt been nearby.

GE profile microwave magnetron burned out after 2 years. Part is supposed to be under warranty, but repair is not. There are no service centers in my area. GE wont just send me the part, or let me send them my old part.

I moved into our house about 27 years ago, and have had to replace every single appliance except the microwave. The oven, fridge, washer, dryer, dishwasher—all replaced at least one time over. But this 90s GE microwave keeps humming along. I really should replace it just because it is this awful off-white color and everything else in our kitchen is part of a beautiful stainless steel/black/white scheme, but it is actually built right into a cabinet and I fear I will not be able to get another microwave in there. The only gripe I have about its performance is the fan comes on and roars full-blast anytime the stove or oven is on. It is so loud its difficult to talk over.

Have had dishwasher for 3 years and it quit working. Had appliance repair people out 3 times and they replaced every circuit board and harness in dishwasher as per GE and still doesnt work. GE own techncians dont even know how to fix it. So I am replacing it! No more GE appliances for me!

GE dishwasher model # GDF610PGJ5BB was fine the first year and a half. It began making noise with electronic control panel beeping for no reason. The wash cycles were incredibly long. Finally after reaching the 26 month mark, the electronic panel gave out. Having no warranty, I called the repair division of the appliance store we had purchased it from. They were to charge me $90 just to come out and look at it. With the purchase price just under $500, I wasnt willing to take the chance of repair costing a third or half of the purchase price. Regretfully, we decided to give up on repair of this dishwasher. We decided to purchase a new dishwasher, but certainly not a GE.

Two years ago, after owning a GE JVM1490 microwave-convection oven (over the stove) for three years, the door handle broke.Let me clarify that I worked for GE first as an engineer, later as manager, for 20 years including 6 in Major Appliances. I am ashamed of what I am reading how GE is treating customers today.I am perfectly capable of replacing the handle myself if I am provided the complete and correct assembly drawings and/or instructions. GE refused to provide me anything when I requested them. The scant drawings and instructions I found online are insufficient. As a matter of fact, the design is so poor that removing the internal bezel, which you must do to reach the handle fasteners, forces you to break the mounting tabs, requiring replacement of this part plus the handle. This was confirmed by the parts store I visited.However, even after removing the bezel, neither I nor another ex-GE appliance engineer could figure out the access to the fasteners. I have glued the handle three times using epoxy and Cyanoacrylate (super glue), but it has broken off a fourth time. I will figure out a way of fixing it before I pay GE close to $100 for both the handle and bezel. And if I replace the appliance, you can be sure it will not be GE.GE should be ashamed of the poor design and deplorable customer service they are giving now. How things have changed!My suggestion is that all with this problem post name and phone number of GE customer service personnel they spoke with.

GE Profile microwave PNM1871SM1SS - After 5 years of intermittent use in our second home, the magnetron crapped out. Research finds this to be a chronic problem with them. GE has sold an inferior product & has no intention of making it right with consumers. GE can only fail in the marketplace, soon relegated to just another so-so company struggling to survive. Goodbye GE.

I purchased a GE microwave from PC Richard and Son in 2011. The microwave is mounted above the oven. On March 13, 2013, the microwave (model JVM1750DP1WW) sparked a fire inside while my daughter cooked a waffle. After I contacted GE via email, the case manager (Misty) sent a technician to my home to inspect the microwave. This was free of charge. The technician claimed the microwave was able to be repaired and he needed to order touch up paint and a few parts. I was shocked that the tech claimed this was a simple repair and able to be fixed. I said, You need touch up paint? This is going to look horrible. How safe can this be after having a fire inside? He claimed it will look good and I would not notice the paint. I spent $411.00 on this microwave less than 2 years ago. I dont think I should have it fixed and touched up with paint to cover burn marks. The microwave went on fire. I dont want it fixed. Its not safe and should be scraped for safety regulations, not repaired and touched up inside with paint. The tech ordered a few parts and I immediately called the case manager Misty to stress to her my numerous concerns on the actions of the technician. I made clear that I was not satisfied with my microwave being fixed and painted when it went on fire, but would like a replacement. I told her I could understand fixing it if it was a broken part or electronic device, but not a fire. She agreed that she also would not like to have a fixed microwave in her home, but that GE can sell me one at a lower price of $150.00. Really, do they need the money that bad that they cant stand behind a dissatisfied consumer when their product went on fire? This could have been so much worse. Lucky my daughter was in the next room. She smelled, heard the fire and stopped the microwave. I paid the $150 just so I can have a working, new, safer microwave in my kitchen. But this is crazy and not good business ethic on GEs behalf. This should be set as a recall, not a repair. I contacted the service manager again stressing my complaint and feelings about paying this fee for a new microwave. She said again that if the technician says the microwave can be fixed, then theyll listen to the technician and fix the item. Well this seems a little one sided since the technician works for GE. No brainier. What do you think he is going to say?

We have a full size counter top GE microwave. It is about 3 years old and there have been no problems. Our last microwave was also a GE and it lasted about 15 years before it started to suffer from occasional electrical arcing inside, while in use. We simply stopped using it and after reviewing all models, chose to buy another GE and it has been great. We have an over the range micro at our summer home - a Frigidaire and not as good. Our research shows it will likely fail long before the GE.

The jvm3160 series has a known defect in the door interlock electrical system that blows the unit fuse if the door is opened while the mw oven is operating. This usually occurs after the warranty expires. Cost to repair can exceed the original cost of the unit. Mine failed in warranty but it took them 10 weeks to fix it. The reason it took so long is that GEs repair protocol calls replacing the whole door (which has NO electrical parts in it) instead of replacing just the latch assembly because the labor cost to replace the latch itself exceeds the cost of a complete door assembly. Door assemblies were on back-order because of the high failure rate.

I remodeled my house 5 years ago and went with the GE Profile appliances in my kitchen. Last week I had run the dish washer cycle and noticed the soap had not dissolved and the dishes didnt seem to be clean so I ran the cycle again. I started it at about 8 pm and we went to bed not thinking any more about it. About 1 am I awoke to a horrible plastic burning smell. I checked through the whole house and could not find where it was coming from until I entered the kitchen. As I entered the room my eyes started streaming from the burn. I opened the dishwasher and smoke starting bellowing out of it. Not just smoke but a toxic smoke filled the room. The inside of the dishwasher was so hot and everything plastic inside was melted. The bottom drawer and parts of the dishwasher were also melted. The silverware tray full of silverware was all melted together. This all occurred in a matter of 5 hours. Had I not woke up when I did, who knows if we would have woke up.The house was full of toxic smoke that did not trigger the smoke detectors. We just went ahead and purchased a new dishwasher and had it installed yesterday. This morning my husband decided to do a little research on this product and found there was a recall last year. I contacted GE and found that our model was not part of the recall because it has a stainless steel interior, only the plastic interiors are part of the recall. I also found out that had we called them and had them send out a certified GE technician look at it, they would replace it. Too late it has already been replaced and sent to the recycle center. I did take pictures and have record of the model and serial number which doesnt matter. I just want to get it out there that this product is also dangerous and a fire hazard. This product could have easily caused a fire in my home. I also wish I would have done more research before we replaced it. Our new dishwasher is a GE Profile...

I purchased a GE Dishwasher 3 months ago and it has been broke (wont drain) for almost a month. I tried to schedule a service through GE since it is under the warranty and they never showed up for the second time. I called and complained but it is not just the product, their service is even worst than the product. I am going to take the unit to Home Depot and ask for a refund or exchange with another brand. It is suppose to be brand new and wont drain or can we get a service scheduled. Never buying this brand again.

We have had our GE microwave for at least five years. We have moved multiple times and had the power go off but through it all, our GE microwave works just as good today as it did when we first bought.

GE Profile microwave Model: PEB7226SF1SS came as part of the builder installation. In the first year had issues with the microwave not starting intermittently and had to call GE support who sent in a technician who had to work on the door alignment and the switch was the problem which said to have fixed. About 2.5 year from purchase the heating seemed to be irregular which we did not take much notice and then it stopped working completely. We called GE support and did get the usual routine of the product being out of warranty and have to pay for the technician. While scheduling they realized they did not have a their own service person in the vicinity and was advised to reach out to local service person.Local technician diagnosed that the magnetron has gone bad and advised most manufacturers have 10 years warranty on the magnetron as they are supposed to last for a long time and I should reach out to GE. Having reached out to GE support again to our surprise were advised that unlike most manufacturers this product did not have 10 year magnetron warranty. Customer service, part service and customer relations kept redirecting to each other. GE does not provide an option to sell the replacement magnetron to the customer and now want their authorized center to be engaged and paid again to have the part ordered and installed. Disappointed with GE product quality, their stand on warranty compared to their competition and their service which has given me run around and no solution. I have written to them asking for solution which they havent responded yet.

I notice when cleaning the inside of the microwave that the coating on the top (ceiling) of the microwave has bubbled and cracked and there is a hole in the interior top coating. This unit is about 9 years old, and is a dual unit as the bottom is a convection oven with very little use. Im told I need to replace the microwave. I have never seen bubbled and cracked interior in many years of owning and using this type of appliance. The photo shows the defects in the lining coating. Im really upset about this.

This dryer replaced an eight year old Frigidaire Gallery Series. The new GE dryer is drying clothes much quicker. I have read some reviews complaining of the buzzer, but it is a nice feature to know when the cycle is about to complete. The nice thing about this dryer is that it has the right amount of dial drying features needed without a bunch of electronics that can typically cost a big service call if gone bad. Also the bottom rear of the dryer allowed enough room for the exhaust to go either left or right behind the dryer with it still sitting close to the back wall. I was lucky to find this as an open box item returned to the store because it was not a gas dryer for the first buyer. Photo shows exhaust located to outside wall.

Let me warn anyone out there looking for appliances. We have had our 2 appliances for a little over one year, about 14 months. It is just me and my husband, very little wear and tear. Both convection oven and dishwasher not working. DO NOT BUY!

My microwave is less than a yr old and has been serviced 2 times. It is not working right still and before it broke last time it would not turn off at all, would keep cooking with the door open! I have 4 small children and the 2 older kids use the microwave. I called GE and talked to customer service about replacing it. The lady said no and that they will repair it (again) but not replace it! Well it broke the 1st time before it was 6 mo old! This microwave is a lemon and they should make it right! It is a health hazard! This is a large microwave and was almost $200! Please someone listen to me, I need HELP!

We bought our first new dish washer 2.5 months ago. It has never worked since we got it. Figured out it was the door. We have called SIX times to GE to have someone come fix it They told us that their systems were changed and that they would take care of this! No phone call back or anything. I finally had to called the service people my self. Whats the point on a warranty if your not going to help. I will never buy another product from GE again!! I am VERY disappointed in the service. If you say your going to take care of it and call me back, then take care of it.

I bought GE OTR microwave in December. It is exactly one month old now. My model no. is: 9195SVC. It looks good, but I find the fan very noisy, even when it is at low. My range hood which we had in the kitchen prior to this microwave was very quiet at low and only a bit noisy at high. I do not know if the noise is because I have steel exhaust pipes vented out. Rest is O.K. but given that others have reported problems in 1-2 months, I am still nervous.I bought this product at Sears with an extended warranty, which is some relief. However, when I was shopping for this at Home Depot, the salesperson told me these microwaves last only 4-5 years. One good thing about Sears extended warranty is that if it is not used over the five years, they refund the warranty payment (with taxes) in the form of a gift card and they were also cheaper than Home Depot.

I purchased a jes1451dn1bb microwave 16 months ago and I just noticed the enamel coating on the top of the unit is chipping. GE has been unhelpful, saying it is outside the warranty and I need to mail the cord and sticker inside it to have a rebate issued. Since I use my microwave daily, I cannot wait until it is processed to buy a new unit. Not only did the product endanger us with exposing our food to paint emissions, the company has been unhelpful. I highly recommend buying another companys product and do your research!

I called GE and they said they cant send a magnetron through the mail as it is dangerous. Well then, how do other companies sell a magnetron via their websites? They are full of it and I got the same issue, $59 for part and $89 for service call, and another charge for labor. What the....... I asked, Isnt the $89 the labor? She said No, that is the service fee. What a racket they have going on.I will not purchase another GE microwave, even though my other appliances are GE. My microwave is six years old. My GE refrigerator ice maker also stopped working after 5 1/2 years. I have had GE washing machine and dryer without no real problems after 12+ years. Maybe GE needs a class action lawsuit to shape them up??? Anybody up for it???

Bought a PDT845SSJ2SS in June. Two months later, it has a leak. Good news, has a leak detector which shuts down the machine. Bad news is that it leaks and the leak detector worked! Called GE. We dont have an authorized service technician in your area. We will get back to you within 3-5 days. Three days later, after I had raised rain with my appliance dealer, he arranged for a local dealer to come look at the machine. Scheduled that appointment - it was Friday, and We only come to your area on Tuesdays and Thursdays. Next Tuesday is booked, so we will try for Friday. Then, someone from an organization called Platinum Services calls and says GE has assigned the ticket to them. Shes going to try to schedule a diagnostic appointment in the next 7-10 BUSINESS days. Told her to forget it (found out she was calling from Lowes and had to find a technician before she could schedule.) End of week 1. Following week, someone else from GE calls and asks if I was cancelling my service request. In the course of the conversation, she asks to confirm the model GE RANGE that I have. Kinda lost it on her... On Thursday serviceman from local dealer comes. Turns on the dishwasher - it leaks exactly where I had said it would. Need to order a part and GE will not expedite. End of week 2. Next week - crickets. Nothing, Nada, mushroom mode (in the dark and being fed BS). Called my appliance dealer today and told him to come pick up the dishwasher - says he cannot do that. I explained, “I will forfeit the money I paid - I dont want a dishwasher that leaks in the first two months of use.” He tell me GE released the part yesterday...whatever THAT means and he HOPES repairman will come next Tuesday to repair. So, I have had a new GE dishwasher for 3 months and it has only worked for 2. Be aware! I assume partial responsibility for this goat rope - I faithfully refer to Consumer Reports when purchasing appliances and electronics. I suggest you do the same... you will find GE listed AFTER BOSCH, KITCHENAID, KENMORE and others. Also, realize the GE brand is now a CHINESE company. Caveat Emptor!

I bought the GE oven and microwave combination. After a pie dripped on the oven bottom we did a 4 hour self clean. The bottom of the oven is stained and it does not wipe up. Also noticed the door is not sealed and it has marks between the glass. There are also all sorts of stains on the interior of the door. This is a new stove installed 5 months ago.

Five years ago I purchased a brand-new condo w/ a GE Nautilus dishwasher installed. This machine has NEVER worked right. Issues: 1. The detergent cup that closes, consistently gets stuck shut, hence only half of the detergent gets dispensed and a second cycle is usually needed to get the dishes cleaner. 2. Dishes are never really clean. Theres always at least one dish that has something left over on it, but its usually multiple dishes. 3. Lower rack started rusting out after 3 years of very light use (used approx 3-4 times a month). Loud. Louder than my washing machine. 4. Replacement parts are ridiculously expensive. A new lower rack is approx $100. My condo also came with a GE refrigerator. It too is junk. Never again...

When we bought our house we upgraded our GE appliances to stainless steel. I had no problems with the dishwasher until a few days ago. Then it stopped working completely. As with most of the complaints I have read the control panel was not working. We took the front door apart just to see if the dishwasher was worth salvaging or should we buy a new one. A screw was NEVER installed on the vent assembly to hold it in place. The entire inside if the door was corroded by steam and/or water. So every wash slowly degrading the electronics. 18 months, 6 months past its warranty where now its out of their hands and you can pay $89 to have someone just look at it. We were lucky it just broke because this hidden mistake on their part could have not only caused a short circuit but a fire. Like so many of the other stories. I will not buy GE again.

The GE microwave we use is almost 17 years old and has never needed any repairs. It is everything you could want from a microwave.

I have had this microwave WES1130 for several years now and the paint began peeling before year two. Nearly all of the paint is now gone (fallen into my food). Also, I bought this microwave to replace a larger GE microwave that had failed after only 3 years. The 8-year-old GE fridge is humming loudly and leaks onto my floor, which has ruined the wooden floor and warped it. I will never again buy a GE product, and neither should you. They do not care at all about quality.

We bought a brand new GE dishwasher from our local hardware store on Black Friday. It was $600 dishwasher on sale. It was installed on December 5th, it broke on December 6th, and we had a repair man come out to take a look at it. To be fair, the local hardware store did ask if we wanted to replace (2 week wait time) or repair (2 day wait time) it. Since it was a bolt that was severed (by opening the door to the machine, mind you), we figured it would be an easy fix. The first technician who visited said, Yeah, its broken. I have to order a new bolt and then come back out in a week to fix it. And oh, by the way, Ill have to drill a new hole for it too. Thats when I called GE customer service to request a new product. But since my 48 hour window had passed, and we opted to have it fixed, it was keep it or ask our local hardware store to replace it at their expense. I bit the bullet and just had it repaired. Now, less than 2 months later, the technician has been at our house three times. He’s soon to have a fourth visit because we need a new dispense modulator. After speaking with customer service several more times, and with a not very nice lady in the Chairmans office, I still have a defective product. Oh, did I mention that Im paid hourly and have now taken off 13 hours? So what’s the use of that $600 dishwasher that we bought? Its been out of commission for more than 2 weeks, in less than 2 months, and has now cost us $900. Thanks, GE! We’re so glad to see you stand behind your product.

Microwave and convection oven together...perfect for heating food or baking. Very easy to operate. G.E.profile. Mounts over the stove with an exhaust fan and lights. Also has a rotating plate in it to heat evenly.

Have a three-year-old townhouse in New England that came with GE appliances. Within months the microwave needed a new circuit board and, later, the auto open vent is making funny noises when it opens and closes. WORSE: Dishwasher on fritz in third year, requiring a new computer control pad. The cost: $283. American-labeled products produced in other parts of the world are going to cost twice or three times as much before their useful life is over. Shop with care, friends.

We bought all new GE Cafe kitchen appliances when we remodeled our kitchen 3 years ago. The first Cafe dishwasher needed repairs in the first 3 months, and was replaced within 10 months due to continuing problems. The replacement GE Cafe dishwasher was deemed non-repairable after 2.5 years. The unit has a design flaw and the bracket holding the top water sprayer broke. The extended warranty with Assurant will not cover the dishwasher because they say it is not a working part. We are trying to get GE Customer Care to help but after three weeks the message we are getting is they do not care at all.The front burner on the cooktop will not light. GE cannot get a replacement part so the cooktop was also deemed nonrepairable after only 3 year. Our Cafe refrigerator also has a design flaw. The refrigerator must be unplugged to reset the computer when the water filter is changed. If you dont the refrigerator does not recognize the filter and will not dispense water. Needless to say I will never buy GE again. It is sad to see what was a good company go down the tubes.

Our builder installed our GE microwave Model: JVM7195SF1SS as part of our kitchen appliances. It worked fine for about 3 1/2 years. Then it stopped heating. It turns on and appears to work, but after inserting a cup of cold water and running it on high 10 minutes, we remove cold water. I looked into this and found that the magnetron (spelling?) tends to fail. Apparently, its a known issue, based on the reviews. GE wont allow consumers to replace this and doesnt provide replacement parts. Getting it professionally repaired will cost more than the microwave is worth. GE sent me a certificate for $150 to replace it, but it will cost at least twice that to purchase a new unit and get it installed. Plus, we have to buy another GE. I dont want to end up in the same situation. So we didnt use the certificate.

Almost immediately after purchasing the GE microwave we started having problems with the circuit board. It is now totally on the blink after only 4 years. This was a high price appliance. Sometimes when setting the timer on 30 seconds, the microwave would still be running and after looking at the timer it would still have 4 or more minutes left to cook. This is a FIRE HAZARD! We have lost food from timer malfunctions. This is a product I would be afraid to purchase. I am wondering why cant there be recalls on these cheaply built defective microwaves since you read of the same malfunctions over and over. GOODBYE GE!

Three years ago, we remodeled our kitchen and replaced all our appliances with GE Profile Stainless Steel appliances, stove, refrigerator, and dishwasher. Two months ago, the dishwasher, model PDWT580R10SS, stopped working. It was out of warranty, but the store where we purchased it said to call GE consumer service to see what they could do. They said that they would replace the parts for free if we paid for service. They said they would send a GE certified service tech to fix it. The two people they sent were dumb as a brick and after tearing apart the door, they decided that the controller board was bad and sent for a replacement. Two weeks later, they installed the new controller board and it still didnt work. They called GE and were walked through a troubleshooting guide and it was determined that the touchpad was bad. They ordered a touch pad and two weeks later, they arrived to install it and asked where the part was. According to them, it was sent to me and was at the post office, which it was not. They then asked to be paid for the three calls and I told them I do not pay for incompetence and would pay them when the appliance was fixed. Turns out, they gave GE the wrong address (their store) for the part and it was sent back. I called GE Consumer Service and talked to my rep who said she would send the part directly to me and that the service rep refused to work with me again and I should contact another service organization. The part came and it was not a touch pad, even though the packing list said touch pad. I called the GE rep, who is now a good friend and she said she would contact the store where we purchased the dishwasher and have them fix it as long as I paid for the parts. It is now two weeks since they arrived and diagnosed the problem. I just called the store and they said the part was backordered for another week. It will be close to three months before the dishwasher will be fixed if it can be. DO NOT, UNDER ANY CIRCUMSTANCES PURCHASE A GE APPLIANCE.

Just bought a Monogram dishwasher one week ago, and the front sound barrier fell off. The service man came out, took a look, and said it was not a big deal. I questioned him why it fell off within such a short period. He stated that it was GEs policy: to make Monogram quieter than competitors, they put in sound barrier in front. However, it fell off often. Since it does not affect how the dishwasher work, GE does not believe that it is a big deal. Therefore, no need for quality control, and he will use new glue to glue it back. No guarantee that it will not fall off later... What is GE stand on the engineering products any more? Will never buy any more GE product...

We bought Cafe series appliances less than 4 years ago including dishwasher, fridge, stove and microwave. These are not cheap appliances. We also bought a service contract with them. When our dishwasher broke a couple of weeks before Thanksgiving, we called service to have it looked at. After 3 trips and over a month later the dishwasher is still not fixed. Each time we tried to make an appointment we were always given a date 1 week out and a 4 hour time window, but each time the technicians showed up late and once even 3 hours late despite the 4 hour window. The fact that after so many visits and part replacement the dishwasher is still broken says a lot about the quality of the product and its maintainability. All customer representatives work like zombies. The problem with GE lies within the culture. Nobody cares. The service contract is a total waste money.

Great microwave I have had for almost 10 years. It works like new. Its a name you can trust and not expensive at all. I have always believed in the GE name and their products. I have a dishwasher and dryer that work just as well. I will continue to buy GE products.

I recently had a service tech out to repair my dishwasher. Before I knew it, he was opening the unit and found a tube looking piece stuck in the unit. He was at my house for 15 minutes and the bill was over $250. He should have asked if I was okay with the procedure he was going to perform and the cost before proceeding. To make matters worse, the dishwasher is not cleaning dishes now. I sent a prior email to GE a couple of weeks ago with no response. I would have never spent this money if I had been given the option and certainly now I have been charged for a repair that actually made my unit worse than before since it is not cleaning the dishes like it did before the repair. I respectfully requested that my money be refunded and/or be given a credit towards the purchase of a GE appliance and have received no response. I tried calling and have been on hold for over 30 minutes now with no one picking up, despite the fact that hold time stated estimated wait time was 5 minutes.

We bought a GE cafe series microwave (model/serial number: pnm919sf1ss/gd235771b) and 4 months later it ceased to function. We just had a remodel and for the first time had an expensive, over the oven microwave and were very excited. Unfortunately, unlike the 2 cheap microwaves weve purchased in the last 36 years, this one we had used for 3 months total, developed problems. The motor seemed to surge and then it would go off. Half an hour later it came back on but would only work for about 5 minutes at a time. I called GE and they arranged for a local company to come take a look. They insisted on a 4 hour window and fortunately my husband is retired so he could be there. The repairman came and didnt have a clue as to what was wrong. He called his boss who talked him through diagnostics. After an hour he left, saying hed be back in a week with some new parts. Again we had to wait the 4 hour window. He came in and we were on pins and needles hoping he wouldnt scratch our cabinets as he took the unit down. He replaced the microwave component and when he left it worked. Two days later it again died. I called the repair people and they told me I had to call GE to get permission for another attempt at repair. I called GE and they said I had to call customer service to file a report. They told me I had to make an appointment for a technician to come out to see if the microwave could be repaired. Really??? The technician would try to repair it again or decide it couldnt be repaired and needed to be replaced. Like we have nothing better to do than wait for these repair people who have no clue as to how to repair the microwave. Every time they take down the microwave they risk ruining our cabinets. It was so unhelpful. I am really disappointed in GE customer service. We had to go out and buy a microwave to use while we were waiting for the repair. They obviously dont care that we cant use their expensive product. Our replacement microwave was $40 from Walmart and works beautifully. We finally complained to our WONDERFUL contractor who originally purchased the microwave for us and he is replacing it with a new one. He was appalled by GEs treatment. He takes note of appliances that are crap so he can warn customers. I thought I was buying from a reputable company and thinking we were getting a great and special product. Too bad.

I purchased all GE Profile & Café appliances when we remodeled our kitchen in 2012. The DW has never cleaned well. I have contacted GE through email several times and now I have to handwash all of the silverware and re-wash most of the dishes. At times, glasses and silverware come out worse than when they went in. We have checked the water temp, pipe size. We use recommended detergent and finish rinse. We had a service call from a reputable appliance repair person, we purchased the recommended citric acid and performed the recommended protocol. This thing stinks! GE recommended another service call. I had a 20+ year old KitchenAid prior to this and it worked like a champ! Never an issue. I am ready to toss it out and buy something else (but it wont match!). Any suggestions?!!

Microwave oven 2008 - The food doesnt go around anymore. The glass insert does not turn. What can I do?

Bought brand new GE Profile DW PDT845SSJSS as part of four appliance package to be installed as part of kitchen renovation. Bought in April 2018, renovation delayed until August 2018, install of appliances October 2018, installer by contractor plumber- excellent seasoned experienced installer. Never used DW until moving things into new kitchen. Washed dishes off in DW before placing in cabinets. After 3rd cycle- DW stopped working stating leak detected - contact GE. Are you kidding me? Brand new appliance! We had original installer come out- no leak- no visible water- we went to placed we purchased DW from - local place - Ray’s Appliances- asked for replacement DW. Was told we would have to pay for installation of 2nd DW at 225 charge. Are you kidding me? GE guy came out and did something to DW to fix it but said problem could return... Serious??? Well -DW worked for a few cycles- now displays leak detected again! Called GE and coming out 12/2. Ridiculous- I want a NEW DW with free installation! I’m paying @971 bucks for something that didn’t work from the outset!!!

Model #JVM1790SK01. High end GE Profile microwave/convection oven. Purchased and installed in 2009. First off the exhaust fan is terrible and is very noisy. The product itself worked well until recently when now the microwave heats intermittently, one time it will come on and heat, next time nothing. The fan runs, but no heating. The truly frustrating part is I need the front venting and no other units have the vents that blow the air outward, all the new units blow the air straight up your cabinets. Certainly a high end unit should last longer than 5 years with only two adults using it now and then. The cost of the service is outrageous and I surely would not use the $100 rebate on another GE product if they do not last any better than this one.

I have a 15 year old washer/dryer set that has worked consistently and it resides at a rental property. I purchased GE washer/dryer set for primary home 4 years ago and it's awesome. It's the level 1-2 steps above basic model and has enough settings to fit my needs (maybe more than I even use) such as pre-soaking, 4 settings for loads and much more. I would not purchase anything besides GE appliances. Very reliable and easy to interface with.

We bought a new GE dishwasher Model # GDT655SGJ4WW. Did not work right out of the box, had service guy come and control board was bad! Really brand new dishwasher, 2 weeks to get that fixed, now the soap dispenser door wont stay closed, order part, whats next? Contacted GE about it, waste of time, no quality control and they dont stand behind their product! Stay away from GE, last appliance for me!!!

We purchased a GE JVM6175EFES microwave oven in 2014 and are now on our 4th unit. When cooking food, condensation forms and drips down the wall behind the microwave. GE replaced it with another, but it was a rebuilt unit which when operated caused sparks and smelled of something electronic burning inside. So another unit was ordered and delivered damaged. Now after a year, the 4th unit is once again causing condensation on the back wall. GE has no answer or explanation for this problem and really doesnt seem to care. This is just one of several problems weve had with GE appliances. We also had to go thru 3 refrigerators to get one that was not damaged from the factory. We will be trying to replace the microwave with a different model, but doubt if GE will work with us to get this resolved as their customer service has been no help at all. DO NOT BUY GE appliances.

SOLVED: PDW9980L00SS GE Profile Dishwasher not cleaning dishes. The rubberized sump of this dishwasher suffers from chemical deterioration. In our case the deterioration allowed waste water to bypass a check valve and return into the wash water. Dishes dont come out clean and the spray wands get plugged up with bits of waste. The solution is to replace the sump. If youre handy with tools its an easy DIY job which requires pulling out the dishwasher and turning it on its side for access to the sump. Lots of videos online re the process and for safety start by shutting off the circuit breaker for the dishwasher power. For our model the new sump part number WG01L00289 replaces the original WD18X10026. Dishes & glasses now sparkle. Hope this helps as there was lots of frustration on this end before replacing the sump seen in the photo.

Just purchased a home with GE Appliances. Dishwasher suddenly wont start and showing 1H code. Nothing in the user manual that explains what this means. Called customer support. After they requested unnecessary personal information (like email address, physical address, etc.), I was finally able to ask what this code meant. She went straight to, We are unable to provide that information over the phone. We have to send one of our service technicians out to your home. She refused to tell me what the code meant, and instantly wanted to charge me for tech visit. I hung up. Then I googled it, and found out right away that it meant the start was paused/delayed for 1 hour. I had hit the delay button by mistake. This was not specified in the manual under Delay Start, nor was customer support trained or willing to provide the answer to such a simple question. GE Support is just a Scam.

Great microwave when the thermostats are working. Have gone through 4 in 2 years. I have convection/microwave. This is a great oven, and microwave. The failing parts should be something GE corrects. Service contract was purchased after 2nd needed repair. Their contracted service was awful. No communication, mis-scheduling, unavailable parts, Poor customer service. Have officially requested with GE not to have this contractor assigned to correct any problems in the future.

I just remodeled my kitchen back in May of 2012. My wife and I started looking for the appliances and we decided to get the GE Cafe series set (dishwasher, cooktop, electric oven and microwave). Our microwave oven, model CVM1790SS1SS, developed a humming noise as soon as you closed the door. It does sound like the magnetron is on. To verify that, I filled a cup with cold water and I put it inside and closed the door without setting any cooking time. After three minutes, the water was too hot to touch. I called GE and told them that it was a fire hazard.They sent one of their technicians and he determined that it was not a fire hazard and if I wanted it fixed, I have to pay for it. How could he say its not? If I close the door, the oven is going to continue heating up until it burns itself and everything else around it. I am pissed at GE because this unit is barely one year old and expensive. This is a safety hazard and GE failed to acknowledge. Bottom line, Ill never buy GE again and will not recommend it to anyone.