I bought a GE microwave in June 2011. Paint started peeling off the inside top soon after purchase. Now, all the paint is gone and GE doesnt care and Walmart wont replace it. So today, I bought a Panasonic. Maybe it will last. Its fifty dollars cheaper, too.

In January 2010, I bought a sensor cooking microwave oven (Model: JES1460DN1BB Serial #: MS900742B). I paid almost $500.00 for it. Now, in less than two years, the inside is already clipping off so it is dangerous to use. I returned it to the store and was told that the guarantee was good for only one year. So, I would have to pay to have it repaired. My last microwave (before GE) lasted well over 10 years. I always thought that GE was a good company; I guess not. I feel that it is their fault. I seldom use the microwave and I even clean it with a damp cloth. I do not think that I should have to pay for the repairs and I should be given some kind of a discount on a new one. I feel that GE is now in the business of making effective appliances. They should stand behind what they make.

Have been using dishwasher (PDWT380VOOSS) since May 2013. Dishes do not come clean and I rewash by hand... have followed all suggestions by consumer relations, service technician and manual…cant afford to replace appliance…GE willing to replace at an aggressive discount because the appliance is working as it was designed to…disappointed in performance of a profile appliance.

I purchased this dishwasher 2 months ago and am VERY disappointed with its performance. For an appliance that claims energy efficiency it is a total failure. My last dishwasher was a Kenmore that I had for 15 years. It outperformed this thing in every aspect. Since purchasing this dishwasher my water bill has gone up and my energy consumption has gone up. Why? Because I cannot put plates close together in this energy hog or they will not get clean. I have to do twice as many washings as I used to for the same results. This piece of junk has NO WASH PRESSURE! All the dishes must be pre-washed in the sink to assure satisfactory results AND I must use the hot water boost or they will not get clean. Energy wasted doing a pre-clean and energy wasted with hot water boost - bad combination! This product is taking me backwards in savings and environmental damage.

Purchased a GE 650 dishwasher which we quickly discovered has terrible racking for North American dishware. Also the control panel is overly complicated yet limited to use (always flashes settings even when not in use). Once you figure out how to load dishes into the very tight/ narrow tines they fall over and chip/break. When investigating the dishwashers by GE made in China/Taiwan etc all have same issue. The ones made in USA by GE have wider and longer tines. We have had MANY dishwashers over the 40 years and NEVER had one as bad as this.When calling GE customer service the senior rep was not willing to offer any customer satisfaction as nothing technically was wrong. At one point she stated we had made the purchase so live with it even though it was the wrong choice. We offered to pay for any cost difference, etc. When questioned about GEs interest in customer satisfaction she stated that was not a warranty issue. She was not concerned about a satisfied customer. With that, we will not be purchasing another GE product or its affiliates. What a waste of money.

Weve had our new over the stove microwave (GE Profile Microwave Oven PVM2170SR1SS) just over one year and the oven light went out. The owners manual has no information about how to replace the light. I called GE customer assistance office and they said it requires a technician to come to the house to replace the bulb. A service call would cost around $95 minimum. This is a ridiculous requirement to make consumers do a service call for an oven light. The owners manual does show how to replace the charcoal air filter, if you use one, by removing the plastic cover across the top of the oven with the door open. Guess what? I removed the two screws holding the plastic cover and sure enough, there was also the access to the cover to access the oven light. You just remove the one screw and the small cover plate can be removed! Be sure to turn off the power to the oven before removing the small 50w Halogen G8 light bulb (Home Depot $5.00). My complaint about GE is that they do not give the homeowner information about replacing this oven light, but instead require you to pay for a service call. The irony is that the owners manual tells you how to access the filter by removing the plastic grill and thats how you also access the panel to replace the oven light bulb. They also tell you how to replace the light bulb that provides light to your range, so it cant be a safety issue about replacing light bulbs. Requiring the consumer to request a service call for $95 just to replace the oven light, when GE could have easily put the procedure in the owners manual, is a real consumer ripoff!

I bought a 1.6 cu ft microwave at Christmas, microwave failed within a month (electric burning smell and microwave quit). Contacted GE to replace and was given a run around (told to buy first, send them the receipt, then they sent a check). Finally they replaced now - have the same issue with the new one. Never buy a GE appliance, I certainly will not!!

Microwave Oven-Space Saver Model JVM6172DF1WW - This is the same problem that is well documented across the web regarding this POOR General Electric product. I purchased the microwave about 14 months ago and the keypad abruptly stopped working. After checking the electrical circuits from the main box to the device, I determined that the problem is not due to the electrical connection. GE appliance division has been in a poor state for a long time now. The company manufactures this product outside of the U.S., in this case Malaysia, and obviously has a poor quality assurance - quality control plan in place. Couple the production issues with poor customer service and you have a huge, well respected company that is putting out shoddy work.I will be trying to get someone to take responsibility for this problem within General Electric but recognize that any success in that respect is a long shot. My message to other consumers is succinct and to the point - DO NOT purchase this product with your hard earned dollars. Go with another brand with a company that stands behind its products and wants to keep the customer coming back for more. GENERAL ELECTRIC is not one of those companies.

Our dishwasher has gotten very warm mid-cycle and now trips the breaker in the house each time we run the cycle. The problem became evident in April 2012. We have called in a GE repair person to fix it and they said it was a heating issue and not repairable. We have not used it since, but have not replaced it with a new one yet. In August, we read about the recall of a similar model number manufactured within same time frame. Our machine model is PDW7300J03WW, the recalled model is PDW7. Our machines serial # is **. Strangely, the serial number is not listed in the recall, even though symptoms are exactly the same!We have called GE Consumer Affairs at 1-800-386-1215 four times, the most recent today, 9/14/2012. Each time we call, we are left on hold for 59 minutes only to be disconnected automatically! I am sending a registered letter to GE CA with a copy of this link and intend to contact my local news if I do not receive sufficient response within the week. Does GE need to see an actual fire report from my fire department or worse in order to get their attention to replace the unit? It is disgraceful and extremely dangerous.

My dishwasher is part of the recall due to fire hazards. Last week it began leaking. I found the leak which is a crack in the plastic basin right under the heating element. Is this connected? Dishwasher does a horrible job cleaning so I would never use the rebate to purchase a new one nor can I afford currently.

First, as a new homeowner blessed with select builder-provided appliances, I never imagined I would be authoring this letter 4 months after closing on the new home. Your friggin’ microwave oven light mechanism truly sucks! I lost the two bulbs a week or so ago and purchased two more at the cost of approximately $10, even though a one-year warranty was stated. That was okay, as I was more interested in fixing the problem versus starting some long-range purchase interest. So, and this is the most aggravating aspect, I have the correct pins and life is ** good, and as I attempt to insert the first, the ** pin breaks off. Okay, so I reflect on the horrific engineering of the mechanism, and I softly” align the second of the two bulbs, and the ** pin breaks off again. ** is my predominant theme tonight. As well, believe me, I am going to inform Taylor-Morrison that their respective selection of your friggin’ lousy pieces of crap is corrupt and misguided. You suck, G.E.! I’m moving forward.

We did not choose our dishwasher. It was installed by the builder but its served us well for the last 3 years. Its good quality and cleans the dishes well. It is also relatively quiet while its washing.

I just had a GE tech out to my house to look at a GE profile dishwasher that almost burned down last week. There was not a cover over the internal electronic control panel inside the dishwasher and that was causing the circuit board to short out. The dishwasher is only 2 1/2 years old. GE wants to charge us $200 for the repairs. But this should be something covered under warranty. Their solution is for us to pay half. I think we will go and begin to look for a new dishwasher and never purchase another GE appliance. If you are in the process of building a house and equipping your home with new appliances, I highly recommend you look for another line and another brand of appliances. I guess I need to check with an attorney to see if there are any open cases against GE for faulty electronic components in their appliances.

My 11-month-old GE Advantium oven no longer has any display, totally blank. When calling to make an appointment I was unable to speak to a live person but scheduled one for today from 1-5 pm. At 5 pm I received an automated call that the technician was running behind and would arrive in about an hour. By 8:30 pm no one called or came to repair my oven. At 4 pm when I was wondering if I would see a repairman I attempted to find on the internet a phone number that would connect me to a live person but had no luck. I have no idea what company is being sent out to make the repairs so that I can get in touch with them. Their service sucks.

Dishwasher lasted just little over a year when it broke down first time. Power switch made out soft plastic jammed up. Next cheaply made door close switch cracked. Part prices are average price. Because poor quality, I predict replacing this within 3-5 years.

About a year and a half ago, I bought a GE Profile dishwasher from a very reputable local dealer. Within 3 months, the digital control panel failed. Because it was still under warranty, the dealer replaced the panel. It failed again. This time they made other adjustments, it continued to fail. Finally GE suggested that the dealer replace the entire door panel, which they did. It took the repairman a couple of hours to do so. Still didnt work. Finally GE declared the machine non repairable and replaced it. Unfortunately the men who replaced the dishwasher didnt install quite correctly because it leaks. I keep a plastic container under the front left corner to collect the water every time the dishwasher runs.But the story doesnt end there. This machine and the first one both include a sensor that apparently check for objects that obstruct the spray arms. I dont know because theres nothing that tells me why the machine is beeping when I attempt to start it. I check the spray arms, move dishes, try to start it again and still get the beeper. I have done this over and over and over again and still it beeps. I have essentially emptied the dishwasher and it still beeps. When it does run, I have to use the boost temp. option and the longest cycle available to get dishes, and I mean dishes, even passably clean. Forget pots and pans, or casseroles. So, if you own a GE dishwasher, I hope that you have the old fashioned dishpan and dryer rack handy. Bottom line, it doesnt clean well, leaks, and beeps every single time I try to start it. Buy something else.

I bought the GE profile dishwasher and refrigeratior 5 years ago. The dishwasher in the first year the mother board went out then had a problem with the motor and now has gone out again and had a repair come out and cant figure out why it doesnt work. the refrigerator has gone out 5 times, the most recent is 8/1/11 and always the same problem. When ever the humidity is high the frig freezes up and then it stops running. Im very disappointed in GE, Ill never again by another GE appliance.

Ive had this dishwasher for about 3 1/2 years now, and never have I been so dissatisfied with a product. I gave a review then, was contacted by a GE rep, followed their guidelines, even had a GE rep come out and review the problems. We changed our hot water temp, when we did dishes (not during clothes washing), checked to make sure the blades are not hindered, changed soap to Finish Gel (works best), added rinse aid. There is just not enough water to rinse off the dishes. Period. I do not add more heat/dry, and use Sanitize and Steam 99% of the time.What happens is the food sticks to the dishes and melds into them, causing permanent discoloration. This is no pot scrubber. It does no scrubbing! I have to wash my pots every time after I clean them in the dishwasher even if I pre-scrub them clean before washing! Sometimes the food from other dishes or the soap dumps onto the clean pot and makes it dirty! There should be a lawsuit against this company for this product. Its horrible! BUYER BEWARE! This rating should really be a 0 (zero)! Sorry I am not submitting proof of purchase from that time. We remodeled our kitchen in 2012.

I rarely use it. I know to avoid too close to the signals produced in the microwave and use it only about once a month.

Don’t know the exact model type but it’s a built-in unit as opposed to a counter top type unit. It’s installed on top of a GE oven. Have had no issues whatsoever since purchasing the house in 2008. Barely no maintenance required aside from the normal cleaning of the inside of it and even that is pretty easy.

JVM1540 - We replaced the microwave that came with our home above the stove. When we took the old one out, the blower was not installed properly for ventless. We thought that had to be the reason it just stopped working. We felt sure it wasnt GEs fault as we have always trusted them for a quality product worth the price. WRONG! I cant help but wonder if Lowes knows they are selling a costly piece of junk! When our new one quit working, we replaced the fuse 3 times, now it says keyboard is shorted service required. And thanks to this site I am tossing this piece of junk without spending any more money. GE shame on you!

The GE dishwasher (model number GLD9312P02SS) I bought about 3 years ago is not cleaning properly because the screening that keeps the bits of food out is disintegrated, and apparently, the part to fix it would cost over $300.00. I will never buy another GE product again.

My GE DVM5140DN1BB Serial # ZS 902371B manufactured in December 2009 has stopped functioning. It looks and sounds like it is working but it will not heat. GE only guarantees their warranty for 1 year after the date of purchase. This should have been my first clue. For a fee, they will come look at it.Growing up we had an Amana Radar Range. My mom bought it in 1987. I replaced it so that I could save counter space and also that it would match my other kitchen appliances. I bought the GE microwave in May 2010. This product lasted for a total of 16 months. Ridiculous! In my opinion, big business companies no longer have to be held accountable for producing bad products. Money was lost but will never again be spent on a GE product.

Its a GE microwave/Vent Hood. Inexpensive. We replaced our last one (which was the same one). Nothing special about it. It performs its purpose. The vent hood has a 2 level light and a 2 level vent function.

PDT845SMJES - I purchased the entire GE Profile series when we remodeled our kitchen in October 2016. The first time I started the dishwasher, it leaked out the bottom of the door. The store where I purchased it sent out a plumber who discovered the soap dispenser was missing the seal. Took a week to order and replace the seal. Worked fine for 5 weeks. Then, on December 17, 2016, it quit mid cycle and I got the leak detected error message. Now I am in dishwasher hell. The store where I bought it said they were too busy to come and check it, so they told me to call GEs customer service number. GE sent out a plumber from Iowa (I live in SD). He removed the bottom panel, to look underneath and decided it needed a new pump and also a new soap dispenser part. That was on back order, so I had to wait until January 11, 2017 for him to come back. When he pulled out the dishwasher to replace the pump, he discovered the tub was leaking along the left side. He said the unit could not be fixed and suggested I call the store where I originally purchased it. They agreed the unit could not be fixed and contacted GE and got me a case number and said GE would call me by the end of the week. Im still waiting for that call. Do NOT buy this model GE dishwasher. GE apparently doesnt stand behind its products and the stores that sell GE are helpless to do anything for you.

Ahhhh me, here we go again! Its no wonder that the state of business in this country is not as solid as it could be. I purchased your GE dishwasher, Model #GDF540HSF2SS, Serial # ZA703816B, on 01/19/2014 from Lowes Home Centers, 3805 Northern Blvd., Rio Rancho, NM 87124. It was delivered and installed soon after. Soon after that, mid to late July, it began to flood our kitchen. A service call had to be made to replace the tub gaskets. Covered under initial 1 year warranty.Here it is the 5th of November, 2015 and now the unit does not function at all. A service diagnostics call performed today the 6th of November to ascertain its ailment to the tune of $89.00! (No, we didnt purchase the Extended Warranty. My belief has always been that the option to purchase an extended warranty is; 1) an opportunity for the company to make extra money on the sales of a product, and 2) an admission by the manufacturer that the product is probably not well made and will probably break down sometime in the near future!) I guess that future is here for this product! It almost lasted 2 YEARS!! Deplorable! The last dishwasher I had was almost 20 years old and the only service to it was to replace a water hose (which I did myself). Diagnostics proved that the electronic motherboard failed!In addition to the inconvenience and the $89.00, Id be willing to bet that the replacement part for this unit will cost 1/2 of the original purchase price of $599.00! AND I WAS CORRECT; the replacement board will cost $269.00 to replace (part and labor)!!! What a rip-off! I will never purchase another GE product as long as I live! And I will go online and register my opinion and complaint about this product with the Consumer Services Bureau and any place else that I can find to vent electronically!Recently the Sandoval Economic Alliance attempted to lure GE to establish their Headquarters here in New Mexico. For various reasons, we did not make GEs shortlist for consideration. I am thankful that we didnt make it! Why would our state want such a crappy company embarrassing our state with their crappy products? I will be sending a copy of this complaint to them as well.

I purchased a GE microwave about 5 yrs. ago. Got it on sales from Lowes. I love it. And it has been moved several times. And I have had no problems with it. It is easy to use and quite nice to look at. I would greatly recommend this product if youre looking to replace the one you have.

My GE microwave works perfectly for microwaving and baking. It is also a convection oven and it works as well for baking as the microwave component does for microwaving. It is roomy and accommodating. Ive had the microwave for 10 years and have never had a problem with it.

I purchased a GE microwave from PC Richard and Son in 2011. The microwave is mounted above the oven. On March 13, 2013, the microwave (model JVM1750DP1WW) sparked a fire inside while my daughter cooked a waffle. After I contacted GE via email, the case manager (Misty) sent a technician to my home to inspect the microwave. This was free of charge. The technician claimed the microwave was able to be repaired and he needed to order touch up paint and a few parts. I was shocked that the tech claimed this was a simple repair and able to be fixed. I said, You need touch up paint? This is going to look horrible. How safe can this be after having a fire inside? He claimed it will look good and I would not notice the paint. I spent $411.00 on this microwave less than 2 years ago. I dont think I should have it fixed and touched up with paint to cover burn marks. The microwave went on fire. I dont want it fixed. Its not safe and should be scraped for safety regulations, not repaired and touched up inside with paint. The tech ordered a few parts and I immediately called the case manager Misty to stress to her my numerous concerns on the actions of the technician. I made clear that I was not satisfied with my microwave being fixed and painted when it went on fire, but would like a replacement. I told her I could understand fixing it if it was a broken part or electronic device, but not a fire. She agreed that she also would not like to have a fixed microwave in her home, but that GE can sell me one at a lower price of $150.00. Really, do they need the money that bad that they cant stand behind a dissatisfied consumer when their product went on fire? This could have been so much worse. Lucky my daughter was in the next room. She smelled, heard the fire and stopped the microwave. I paid the $150 just so I can have a working, new, safer microwave in my kitchen. But this is crazy and not good business ethic on GEs behalf. This should be set as a recall, not a repair. I contacted the service manager again stressing my complaint and feelings about paying this fee for a new microwave. She said again that if the technician says the microwave can be fixed, then theyll listen to the technician and fix the item. Well this seems a little one sided since the technician works for GE. No brainier. What do you think he is going to say?

This unit is an over the oven with a vent fan, lights, and is paired with my GE double stove. I bought this microwave was purchased for more reasons than performance. It has been used frequently for over 5 years with no problems. It is easy to use and the food with this model (which has the rotating tray) heats the food evenly. No problems, functions with ease, and dependable.

Our microwave caught fire today and burned our kitchen, stove top, & attic. According to the Fire Captain, the cause of the fire was the GE microwave panel shorting out. Had my mom not been standing right there as it happened, our entire house would have surely been a loss.

Soon after getting our new Cafe Microwave CVM2072SM3SS the control panel died. I called GE and power cycling got it going again. This is an over the stove microwave, so we were also told by GE not to use the right front burner without the fan on boost. The problem persisted from time to time and steadily got worse over our 5 years of ownership. Reading the internet this was a common problem known to GE but they took no action to contact owners. The panel is now dead and my only option, having tried the fixes on Youtube, is to invest money starting at $108 for an inspection or buy a new Microwave. My entire experience with this product has been a big disappointment as I also own a GE Cafe range, fridge, and dishwasher.

I own a GE Model #JNM1731DM1CC that came with my condo, in March of 2008. After two weeks, the tray was spinning, and nothing was heating up. They came, and replaced something, and it worked again. It is now November of 2011, and the ** thing doesnt go off. When the timer stops, and you open the door, the table turns, and the microwave is on, letting rays come right out at you. I have to unplug it after every use, so that I dont expose myself to rays coming from the microwave. I spoke with several appliance repair shops, and they told me that it is probably the circuit board, and that to repair it would run at least $200. I am so disgusted with GE. I also have a stove that practically blew up, when the door shattered, after only having it for six months. They had to come and replace the whole glass front. I doubt very much, if they will help me, because it took at least 12 calls to get them to replace the glass door, with the glass all over the place, and inside the oven, four days before Easter dinner at my house.

We moved into our new manufactured home in May of 2013. That is the month our above range built-in GE microwave was installed. In October of 2013, one of my sons heated a frozen chicken cordon bleu serving for 3 minutes, 45 seconds, according to packaging directions. He said that some of the inside of his food was cool, so my other son put in his serving for four minutes, zero seconds. All of the packaging was removed and each serving was placed on a separate Corelle plate and covered with Glad microwave-safe plastic wrap. While heating the second serving, the microwave started on fire. Fortunately, my son extinguished the fire before it spread. The food did not combust. The fire seems to have started from the ceiling behind the fan. The entire inside of our microwave is clean except for the soot that billowed out from the center of the ceiling. When the service tech came, he scrubbed the soot off of the ceiling with some paper napkins (which he left inside of the unit) and said that the microwave was a total loss. He also said the fire was caused by misuse, because plastic wrap is not meant to be used in the microwave, therefore even though the fire happened within a year of purchase and installation, our warranty was void. I asked GE to get a second opinion and they agreed to send a third party servicer (A&E) who stood me up three times! I finally got to schedule a GE tech to come at the end of December and they sent the same guy who said the fire was our fault! He told me that he never said plastic wrap is not meant for the microwave, but that we are being dishonest because fires only start when the food is left in the microwave for too long. He accidentally let it slip that he is seeing the same problem with GE microwaves in a lot of new construction for student housing in Tallahassee. (We live 20 minutes south of there.) He attempted to recover GEs reputation afterward by saying that of course it was the students faults, too, for misusing the microwave units. Anyway, GE has graciously offered to sell us a new microwave at slight discount. Haha, no thank you!

I purchased a microwave in Oct 2010. It went blank and nothing works. I checked to see if its receiving power. The power is okay. I purchased the microwave, fridge and stove at the same time. I always had confidence in GE products. Microwave should have lasted longer than less than 2 years. I didnt purchase extended warranty because of GEs reputation. Very dissatisfied customer.

I have microwaved many types of food in mine! Remember, it’s not just for reheating leftovers! I have cooked fish, and chicken successfully. Those turned out juicy and tender. I follow directions from a microwave cookbook. It’s easy and clean up is a snap.

Model JVM1740DP1BB - GE Microwave - complaining since November 2014. Great microwave UNTIL the inside ceiling bubbled and began to flake off in various locations. A service tech that visited our home advised us to call GE and advise them of a potentially hazardous situation. The GE rep offered to sell us a new microwave but only stated that we were out of warranty, although this is clearly a manufacturers defect! She proceeded to tell us the lining was perfectly safe but maybe we shouldnt operate it. I have written GE management to see if they will assist in replacing the defective unit; GE is the reason we purchased it to begin with (but it may be the reason never to purchase one again).

Bought the new dishwasher in Dec. 2013. In November 2014 a month shy of warranty expire, the detergent dispenser did not release or partially released the detergent. GE sent out A&E Factory service to fix. First visit initiated the parts order which was a new computer board and a Cascade Series detergent dispenser. A month later the second visit to install parts, the A&E tech was at our home for 3 hours and it took that long to remove and replace detergent dispenser. The tech did not replace computer board stating it was not needed? A week later the detergent dispenser still did not release the detergent! Called back to set up another appointment which was at the earliest Jan 19th 2015. Meanwhile last Friday Jan. 9th 2015 the dishwasher started to smoke heavily causing smoke detector to go off at 9 p.m. at night. Thank goodness!! We were home so that I could disconnect the power. Third visit was 1/12/15 and was informed by Lead A&E tech that the board should have been replaced and that the tech that was sent out was a trainee and inexperienced to work on my dishwasher. He should of never worked on my dishwasher(!!) according to the Lead A&E tech. The Lead A&E tech also stated that my model has had a problem with the computer boards which is essentially the brain of the dishwasher. I am currently taking my fight back to GE since A&E Factory is a subcontractor to GE and is not authorized to replace appliances. I told GE that I want a new dishwasher that is not using the problem computer boards even if it is an upgrade. It is not our fault that they have work with A&E who send out inexperienced techs to work on complicated GE appliances. We want a dishwasher that we both feel safe to run while we are not home. Is that too much to ask for?

28 Inch Front Load Washer with 4.9 cu. ft. Capacity, 13 Wash Cycles, 1250 RPM, Steam Cycle, Steam Assist, Time Saver Option, Sanitize Cycle, Energy Star in White. Overall this machine is top of the line. Purchasing a home appliance is like purchasing a vehicle. I took my time and reviewed and compared before purchasing. About 3 months. I had just purchased a home and so you want an appliance that is going to last. It has a 10 year warranty. It has 3 color options. It's cosmetically attractive. It also is elevated which is a smart choice for a basement machine in case you have issues with water in your basement.

When you use the vent fan it is very loud even in the low position. I would also like to see a brighter bulb under the microwave. I dont have much more to say except that the oven functions well otherwise.

After about 5 months of owning the unit (GE dishwasher model GDT580SGFBB), the door latch sensor became defective and discontinued the wash cycle up to 6 times every use. I contacted the GE warranty department. Their consumer relations advocates treated me as subhuman. I never felt like a valued customer, my concerns and my time were never a priority. Instead I became a part of their research and development program while beta testing a defective product.After 6 months of futile repairs requiring multiple technician visits I was exasperated. I had submitted 4 separate warranty claims that often were mysteriously closed without my knowledge. I finally contacted the original retailer, Home Depot, and shared my experience. They catered to me even though it was well past the 90-day store policy. They gave me a credit for the purchase price so I could choose a replacement. Since I dont want to touch another GE appliance with a 10-ft pole, I chose another brand. Shortly thereafter I received a call from GEs Escalated Issues department offering to replace the unit. Evidently that lit a fire under them. But it was too late, my patience with GE has been exhausted. If this is the way GE wants to run their business, then it will be a fast-track way to dig their own grave.

GE over the stove microwave stainless Steel Adora made for Home Depot. It started to make a funny noise and then it wouldnt heat. I contacted GE about the problem. It would be $89.00 to come out and an additional $25 for the double wall oven that would not stop beeping and would not work at all. We purchased a GE double wall oven at the same time as the microwave. All of our appliances were purchased in 2006. All GE and we are worried they are all junk. My husband took it to an appliance repair place and they said the Magnatron and the diode went on the machine. They said it is basically junk! Disgusted. Dont buy GE. They make junk! I just had to dispose of this piece of trash!

GE Profile Microwave JVM1850DMCC - For the third time in 5.5 years, Ive experienced a magnetron failure in a GE Profile Microwave. The first failure was fixed under warranty. The second was so bad, the microwave had to be replaced, but it was no longer under warranty. I should have heeded the warning and gone to another brand, but on 12/31/10, I paid over $500 to replace the microwave with a new GE Profile to match the existing appliances. Apparently this was a big mistake as the magnetron has failed yet again. The microwave is on its own separate 20A circuit, so that shouldnt be an issue. It would seem, however, based on the number of complaints I see on this site, there is something inherently wrong with the manufacture of these microwaves, or more specifically the magnetrons. Im extremely disgusted at this point.

We have an overhead microwave that fits nicely into the spot. The power level seems to have dropped off, but this is after more than 8 years with lots of daily usage.

I called GE, b/c the microwave has paint flaking off and piling on top of my food. Just like snow flakes. You tap the inside-ceiling with your index finger lightly and it looks like theres a snow fall inside the microwave. Lots of metal is exposed. GE answer: metal is non-toxic, do not worry if small amounts ingested! Told me to not use it anymore and replace it at my own cost. After insisting that they are responsible for a defective product, they will give me a break of $100 on the price, conditioned on them confiscating the above microwave (so you or someone else does not use it). Bad deal. I am looking for another brand!

I recently purchased a GE Profile 1.9 microwave oven from Home Depot less than a year ago. Last week I went to remove something that I had cooked and went to close the door and it would not stay shut. I ended up getting some masking tape to try and tape it shut in order to keep the light from staying on and burning out until morning when I could get a better look at it, thinking that it had to be something small that could be taken care of without any problem. Hinge adjustment, something getting in the way that I couldnt see, etc, etc. Wrong! I have been over this door with a fine tooth comb and there is nothing that I can see that is preventing it from staying closed, not only that but according to everything that I have read, I am very lucky that I didnt get fried while trying to figure out if the latching mechanism was functioning correctly. I am not even going to go through the long drawn out process of dealing with GE over this due to the simple fact that I have been there done that with my dishwasher that showed up with the front panel dented a few years back from the factory and I ended up blaming the place that I had purchased it through instead of GE and have since found out by reading other complaints that this seems to be something that is not unusual when it comes to GE appliances. I spent over 1100.00 dollars on the dishwasher and they only replaced the panel instead of giving me a new one, and I have never been satisfied with the way that it operates, and it was a very long and drawn out process and I am just not willing to spend the time again on another one of their products. It is unfortunate that we have entered a time where customer satisfaction means nothing, and the days of caring about having repeat business from a satisfied customer are over. The prices continue to rise on the things that we have become to depend on and cant seem to live without, but the quality and workmanship have not only diminished but also present safety threats. I will never purchase another GE anything and I am looking forward to the day when we all have finally had enough of this and do something that makes these companies stand behind the products that they sell and quits ripping the consumer off. Its rampant across the board no matter what you buy, and there should be laws in place in order to keep it from happening. We have laws for everything else, why not have a couple that protect the consumer and their pocket books.

I just remodeled my kitchen back in May of 2012. My wife and I started looking for the appliances and we decided to get the GE Cafe series set (dishwasher, cooktop, electric oven and microwave). Our microwave oven, model CVM1790SS1SS, developed a humming noise as soon as you closed the door. It does sound like the magnetron is on. To verify that, I filled a cup with cold water and I put it inside and closed the door without setting any cooking time. After three minutes, the water was too hot to touch. I called GE and told them that it was a fire hazard.They sent one of their technicians and he determined that it was not a fire hazard and if I wanted it fixed, I have to pay for it. How could he say its not? If I close the door, the oven is going to continue heating up until it burns itself and everything else around it. I am pissed at GE because this unit is barely one year old and expensive. This is a safety hazard and GE failed to acknowledge. Bottom line, Ill never buy GE again and will not recommend it to anyone.

GE dishwasher GDT680SSH2SS - I don’t normally do product reviews... In this case, I am making an exception. This is without a doubt the very worst dishwasher I have EVER owned. I’m pleased with myself for buying the optional insurance when I bought the dishwasher from Home Depot. It has been repaired 6 times. It even had to have the main seal replaced. It flooded my kitchen and ruined my floor. My homeowners insurance sued GE. I think it worked fine for only 6 months...then it went downhill. It is extremely loud! It sounds like your dishes are being destroyed... No, I’m not exaggerating!I have NEVER had issues like this. I bought this GE as I really like the screen bottom so that large particles didn’t get caught up inside the pump etc... As I’m typing this, I have it set for Sani wash and the water isn’t hot at all, and it had standing clean water in the bottom when I opened it up this morning. I will also note, I rinse all my dishes before putting them in. I will never buy GE anything again.

Five years ago I purchased a brand-new condo w/ a GE Nautilus dishwasher installed. This machine has NEVER worked right. Issues: 1. The detergent cup that closes, consistently gets stuck shut, hence only half of the detergent gets dispensed and a second cycle is usually needed to get the dishes cleaner. 2. Dishes are never really clean. Theres always at least one dish that has something left over on it, but its usually multiple dishes. 3. Lower rack started rusting out after 3 years of very light use (used approx 3-4 times a month). Loud. Louder than my washing machine. 4. Replacement parts are ridiculously expensive. A new lower rack is approx $100. My condo also came with a GE refrigerator. It too is junk. Never again...

We normally purchase LG appliances but this time we purchased a GE Profile induction range and GE Profile above range microwave oven. The relay went out on the microwave oven about six months after we got them. Their website for scheduling service is absolutely horrible and didn’t work multiple times and when I was finally able to schedule, it was two weeks out. I then called but was told I couldn’t get an earlier appointment. So we waited the two weeks, then they had to order the relay. GE waited until the part was delivered to us to schedule the return visit - over 2 1/2 weeks later! So at this point we are without our new microwave for over a month and a half. Moral of the story is never ever to tempted to buy from GE, LG appliances & cust service are great.

I purchased a GE microwave and had 3 different problem with it. They sent a service man out and he could not fix the problems. Now GE said they are closing the case even though they know I do not feel the problem has been fix. My other GE microwave, I really liked until it stopped working around 8 yrs old. This one is a piece of junk. It is an over the stove microwave so I cannot just take it back to the store. I would say GE has really gone downhill over the yrs. This will be the last GE product I ever buy.

Lousy and wont clean dishes. $1,000 down the drain.

Run, dont walk, toward any dishwasher other than a GE. Problems with the dishwasher within one year - black residue on my dishes that felt and smeared like grease. Calls to GE repair resulted in the worst customer service I have ever experienced. One call returned at 4:00 am. After two visits, a lecture about how to load a dishwasher, I gave up. The effort of making calls for visits, taking time off work, rude repair technicians and being told it was not grease, I now have a dishwasher a few years old that is falling apart. Screws are now coming loose and the buttons are sticking.

Have a three-year-old townhouse in New England that came with GE appliances. Within months the microwave needed a new circuit board and, later, the auto open vent is making funny noises when it opens and closes. WORSE: Dishwasher on fritz in third year, requiring a new computer control pad. The cost: $283. American-labeled products produced in other parts of the world are going to cost twice or three times as much before their useful life is over. Shop with care, friends.

I have a 2011 GE Model # JES1456BJ05 microwave and it has been gently used and kept clean. Upon cleaning today I noticed that the top of the inside is blistering and peeling off. Surely this is not safe as it could fall into food, plus they should make them to stand heat, after all this is why they are made for heating things. I called GE who informed me that there is no recall on them so I am pretty much stuck to go out to buy a new one with no help from them. I now read that this has happened to people before. Lesson learned never purchase a GE microwave as they do not stand behind their products when a manufacturing problem develops if you are the first one to call, and beware and ready to buy a new one every 2-3 years. This is all they are made to last!!!!!

We wrote to GE regarding the issue with the dishwasher and, after some phone tag, a certified GE engineer came to the house, diagnosed the problem and ordered all the replacement parts. This morning, they came by to install and essentially rebuild the entire system with the exception of the stainless steel. Overall, we are very happy with the outcome. With all the negative issues GE experiences online with regard to the Cafe Series, I give them a solid 8 for responsiveness and taking care of the situation. Perhaps ours is a rarity, but if you approach them logically and with facts, they seem willing to work with the consumer. Heres hoping the system cleans better now too!

The microwave is small enough for 1 person and yet big enough for a family of 4. I feel it cleans up pretty easily also, inside and out. This is also a stainless steel on the outside, that makes it easy to clean.

Ive used this GE model JES2051DN1BB (manufacturer date August 2008) microwave for ten years now and impressed that it is still working perfectly cause you dont see that much anymore. I usually prefer Maytag products cause my GE washer and dryer did not last for me, but this has seem to be different. Maybe GE should stick to making microwave ovens instead of anything else.

July 4th, 2010 - GE Profile Dishwasher, Model: PDW9200N00BB, Dishwasher had been humming after cycle was over for a little while, this night I walk into the kitchen late and find it full of smoke. Circuit board has a hole burned though it and wiring harness is melted. Never tripped any safety, could close the door and it would come right back on, smoke and all. This model was not on the recall list but I called GE anyway. After describing the fire they send someone out, then they send a new dishwasher out and install it. I assume they wanted the old one to look over or just to get rid of it. New washer installed the end of July 2010, new model number PDWT500R10BB. Today is 2012-02-02 and the new machine would not stop at end of cycle (Got down to 1 minute and stay there for at least 20 minutes before we turned it off). This machine is now making the continuous hum after the cycle stops that the old one did before it caught on fire.Called GE, they said they could maybe go half on parts and service until they checked where I was located. (Wichita, KS. Area population 500,000+) They said that they didnt send factory techs to my area and I would need to contact a local repair service. I pointed out that they had a factory guy for when my machine was on fire and they said it was just a malfunction now, so they could not. No half on the price for repair either at this point. This is a $1100 to $1200 dishwasher with, as near as I can tell from complaints online, a history of going up in flames. I understand things break etc, but when you continue to put out products like this and then refuse to remedy the problem, I and anyone who will listened to me will never own anything GE again.

Purchased all new GE appliances: oven, cooktop, refrigerator, dishwasher and microwave and can’t say enough goodness about all. I would recommend GE appliances to everyone. Prices were reasonable and delivery and hookup were done with ease and professionally.

Called out GE service tech to diagnose my dishwasher which was not draining after the wash cycle ended. Was told it was the control board and it would be best to buy a new dishwasher. Purchased a control board online (was a GE original part for a lot less than the GE price) but it did not solve the problem. After researching the problem online, I found out that it could be the drain valve. Sure enough, bought one for $14, installed it myself and the dishwasher works like new. Called GE Service to try and get a refund for the service visit ($89), was told that I had 30 days to have the tech come back out at no charge. Tech never advised me of this policy and GE will not refund my money.

My microwave also began peeling under the glass within a few years after we purchased it. I contacted GE and they claimed they never heard of that type of complaint before and there was no recall. I knew it could not be just my appliance that was doing this. It is peeling A LOT under the turning dish, but unfortunately I cant afford to buy another oven/micro appliance now. When I can IT WILL NOT BE A GE!!!

We have a GE Advantium Microwave. It is our second model (we moved and left the first one behind). It is spacious, has an intuitive menu system, cooks extremely well, also includes a convection oven feature that we use to great advantage. The nicest microwave weve ever used (and weve used plenty of them).

Have a six-year-old GE Tall Tub Café dishwasher (model#GHDT168V00SS) I purchased at Home Depot in Denver. Also purchased a 5 Year Extended Warranty that I assumed was through GEs Extended Warranty Opportunity. The dishwasher suddenly began leaking and ruined our hardwood floors (I know, wood floors in kitchen not good; tell that to the builder). I called GEs customer care number and basically talked to a scripted robot. You dont have a warranty through GE, its a third-part insurer such as Assurant, I was told. Not worth repairing, and the warranty expired a few months ago. I know parts wear out, but for heavens sake, cant they build a dishwasher that doesnt leak from the bottom, underneath the unit, where water will seep unbeknownst to people, eventually destroying the floor? Guess not. So, no more GE appliances EVER. PERIOD! Switched to Samsung, LG and Maytag. Now, gotta spend a couple grand ($2K+) to repair the hardwood floor.

Figure it out GE! The sixth motor and mode selector for our washer has been reluctantly ordered by a tech this morning. The second motor was installed months after buying the brand new machine. Now, only two months since the fifth motor and mode selector was installed (Dec 2, 2011), the wiring harness is burnt up. The tech recommends replacement of the washer by GE, but only gets push-back from GE. This newest incident included a horrific smell of smoke. I do not trust this machine. I have a wife and child to protect. Think about it - do the math - add your costs for repeated repairs. You do not get to be a company the size of GE by not understanding simple economics. Open your eyes and replace our washer.

One needs to be a contortionist to replace the under light bulbs on this microwave. It is a TERRIBLE design. Why werent the sockets placed so that the prong holes could be visible? One has to do a back-bend over the stove top and then the socket holes are still not visible. DO NOT BUY THIS MICROWAVE. DONT BUY THE STOVE EITHER. IT IS DANGEROUS. THE KNOBS TURN EASILY AND OPEN THE GAS.

New house and all appliances came w/ it, used washer once to make sure plumbed correctly. It is the best storage container and no one looks in it... by not using it saved $38 a month in water bill and controlled water usage, throwing used water out on plants in drought, if need to sterilize put bleach in rinse water. I had 10 family members may have to use it other than for storage. Love to get a clothes pole for hanging laundry but God given rights of free sun and drying has been removed from us by associations. My machine is there if I need it. But great multipurpose and never complains... course after 13 years, crumbs in bottom and should run soon to clean it out... Its black and as this was a speculation home, builders chose colors... it doesnt show dirt as white appliances does... would buy same color again.. although real dark with oak kitchen.

Since 2010, our 2006 GE 1.1 cu. ft. countertop microwave oven model # JES1136WL has had power failure problems. It began in our previous home and now in our next home. All of a sudden, Id check the panel and it would say PF, which means power failure. So, Id reset the clock and there it is, ready for the next usage. Over a year later, in our new home, as of yesterday, it will start and immediately cut off. Now, weve been using this microwave in the same plug since May and now its October. So, what happened? Today, Im looking for the users manual and have located it online. But it appears that the PDF GE has for it, the Adobe document, has a problem. So, Im going to check it on my laptop, as this is my PC. Thank God we only paid under $100 for it. On some of these consumer complaint stories, the person paid a great deal for theirs.

We bought our new home 4 years ago & bought upgraded GE Profile appliances. To date, the gas range has been serviced 3 times, the refrigerator too many times to remember & now my dishwasher pump has gone out. We found out the pump just cannot be replaced, but all hoses, etc. must be purchased as well. GE is CRAP & I will never even consider purchasing anything from this company again. Knowing it was bought out a few years ago by Whirlpool (I believe) but still remains under the GE label - consumers BEWARE.

Bought a GE microwave and it broke 1 year and 1 month after I bought it, called and found out it would cost more to fix than to buy a new one. After reading other peoples report on how GE treated them on their problem, I will not buy GE anymore.

Our GE microwave/convection oven model number JES1290SK01 is making grinding noises and has caught fire once on the side panel. We have owned this microwave for only 4 years. It was a terrible investment. No wonder Obummer had to bail them out. That is the quality the unions are currently producing. It’s sad really...

I owned a previous GE dishwasher 4 years ago and would give it excellent ratings. I bought a newer top of the line version when I purchased a new home. It simply fails to clean dishes. Wet food that any dishwasher would remove, remained on the dishes. The drying cycle never dried the dishes. We have to hand wash the dishes now and have stopped using the dishwasher after 3 days of ownership because of health hazard. I called Lowes about this within days of the install. Lowes sent out the installer who claimed the machine was installed properly. Then Lowes scheduled a GE repairman to come to the home. We waited all day for him to arrive for a morning appointment. He never came. Lowes stepped up and is replacing the dishwasher with a non-GE product. I would not touch a GE product again given the lack of service and commitment to their product. I feel confident with Lowes, but not with GE - their ethics from engineering, manufacturing and servicing are very suspect with us.

We recently purchased a new GE microwave and are pleased with its service and price. The microwave is attractive and seems to be constructed well! We would buy another GE product and feel that they provide quality in appliances!

I live in a condominium building with approximately 105 units. We all had the same GE microwave installed in our units approximately five years ago (contractor-installed). I sent out a mass email to all of the owners to ask if they were having the same problems I was having my microwave, which was the touch panel will not accept commands. I received approximately 15 complaints from various homeowners with the same complaint.When I called GE to tell them the problem I was having with my microwave, they told me a technician would have to come out and diagnose the problem. The service call would be $99.95, and at that time the technician would let me know what the problem was and tell me the charge for the replacement part and labor cost. I told GE Customer Service that there were many people in my condo building who were having the same problem and I wanted to know why each homeowner should have to pay the initial $99.95 service call fee? The response was, That is our policy. To placate me, GE customer service said they would charge me the initial fee but I would receive a 25% discount for parts and labor.In the meantime, two or three other homeowners made service call appointments for their microwave oven with GE. One homeowner was given a fee for parts and labor, which would have been only slightly less than buying a new microwave and another homeowner was not given a labor cost. In both cases, the homeowners did not go forth with their repairs, because buying a new microwave was more cost effective.I want Consumer Affairs to know GE grossly mishandled this malfunction issue amongst a group of homeowners who own the same microwave. Secondly, I realize the microwave ovens are five years old, but GE should have some record regarding failing parts along with the life cycle of this product. Lastly, I want GE to be held accountable for not telling consumers a repair cost for certain issues. There should be a cost per hour, not cost per broken item.I kept records of all correspondence amongst the homeowners of my condominium building, so I will be of great assistance if you need further help from me. Product malfunction is a GE Profile Spacemaker 2.0 Model # JVM2070SK02.

My microwave (model#JES1139BL03 and serial#901897B) is peeling around rolling fixture that holds glass tray. I wipe it with hot water and it continues to peel off. Its almost all gone. Ive only had it two (2) years. This cant be normal. Anyone else have this happen?

The flat, firm-press keypad for microwaves just seems dated. Often they get worn out. However, all in all, it does what a microwave is supposed to do and does so efficiently. It’s not the most attractive microwave though.

We bought 6 new GE appliances when we purchased a new home. The reason: my husband worked for GE for 35 years and we wanted tell our friends how happy we are with them! Now, we are sorry we have to complain about the dishwasher (Model #GDWF160R1OSS). The only good thing about it is how quiet it is. We have tried many different soap products, a little soap, more soap, Rinse Aid, half clean or nearly clean dishes placed inside, only to have the glassware looking horrid, not clean and cloudy. Service man offered suggestions but none have worked. The stainless steel interior also looks horrid because of streaks. So much for energy efficiency when we have to wash all our glassware by hand to get the residue of soap off them. Another dishwasher we have had for 25 yrs. does an excellent job - so dont blame it on the phosphate removal from soap.

I purchased the dishwasher in August. In September, two months later, it would not drain. GE sent a service tech out under warranty who found food particles stuck in the drain pump, removed them, put the dishwasher back together and went on his way. Since then, we have been basically rinsing the dishes clean before even putting them into the dishwasher as, obviously, this dishwasher cant handle much. I have also been keeping the drain filter screen spotless. Two months later, the drain is clogged again. GE sent a second tech out who said that the first tech should have repaired the dishwasher.The problem is that GE knows that the drain pump screen and the filter screens are inadequate and let food to pass through and block the pump. GE has redesigned the pump and the screens and filters and even added a filter to the design and we will get all these new parts installed for free and the dishwasher will then work as it should. Tech ordered the parts on 12/21. The service call was scheduled for tomorrow, 12/27. I got a call today from GE saying the parts had not been delivered. I know this because they are being shipped to my house and they have not arrived. GE called to reschedule the service call to January 6th, 2020--another week and a half away!!!! Clearly, this dishwasher is not working as it should and GE has a problem on their hands. I am now weighing my options as I sit on hold on GEs Customer Service line as I wait for someone to complain to. But as the dishwasher is still only a few months old, I am tempted to load it up and bring it back to the big box retailer from whom I purchased it and demand a refund. This is ridiculous!!!!

I have had a fridge, a washer and a microwave oven from GE. I have been so disappointed in all three, but the microwave oven disappointed me the most. The door broke around the handle and the hinges, and was replaced shortly after buying it. Then it broke again and I replaced it myself. Then it broke again. This makes me not want to try another GE product. The fridge shelves all broke because they were plastic. The washer fell apart shortly after a year. It is just myself and my husband using them, so they should last for years. When you buy large item, you would like them to last a long while.

So I was forewarned by my family of nightmare experiences they had with GE appliances over the course of the last 50 years of our family. I just bought a home with 2 GE dishwashers that are both under 5 years old, and both are malfunctioning terribly. The one has leaked from the bottom and created severe water damage, and the other will not drain. Just an affirmation of the bad experiences my family has had in the past. Cheaply made, and often the go to appliances installed in manufactured and new homes. Had a service technician come out after speaking with GE on the phone and they assured me it was cost free. After the technician came out and told me I was being billed $105 for the call, and it would cost an additional $255 to fix the washing machine. The tech was not very friendly or helpful, and his only concern was collecting the bill. Avoid these products!

Bought a PDT845SSJ2SS in June. Two months later, it has a leak. Good news, has a leak detector which shuts down the machine. Bad news is that it leaks and the leak detector worked! Called GE. We dont have an authorized service technician in your area. We will get back to you within 3-5 days. Three days later, after I had raised rain with my appliance dealer, he arranged for a local dealer to come look at the machine. Scheduled that appointment - it was Friday, and We only come to your area on Tuesdays and Thursdays. Next Tuesday is booked, so we will try for Friday. Then, someone from an organization called Platinum Services calls and says GE has assigned the ticket to them. Shes going to try to schedule a diagnostic appointment in the next 7-10 BUSINESS days. Told her to forget it (found out she was calling from Lowes and had to find a technician before she could schedule.) End of week 1. Following week, someone else from GE calls and asks if I was cancelling my service request. In the course of the conversation, she asks to confirm the model GE RANGE that I have. Kinda lost it on her... On Thursday serviceman from local dealer comes. Turns on the dishwasher - it leaks exactly where I had said it would. Need to order a part and GE will not expedite. End of week 2. Next week - crickets. Nothing, Nada, mushroom mode (in the dark and being fed BS). Called my appliance dealer today and told him to come pick up the dishwasher - says he cannot do that. I explained, “I will forfeit the money I paid - I dont want a dishwasher that leaks in the first two months of use.” He tell me GE released the part yesterday...whatever THAT means and he HOPES repairman will come next Tuesday to repair. So, I have had a new GE dishwasher for 3 months and it has only worked for 2. Be aware! I assume partial responsibility for this goat rope - I faithfully refer to Consumer Reports when purchasing appliances and electronics. I suggest you do the same... you will find GE listed AFTER BOSCH, KITCHENAID, KENMORE and others. Also, realize the GE brand is now a CHINESE company. Caveat Emptor!

No matter what it is whether it's a GE hot water heater, an iPhone, a car or a frozen TV dinner, you're going to find someone that had a bad experience. After a day of rain eight years after I put in my Home Depot GE hot water heater, the pilot was out. I don't know if it was wet in there or what but it took me 10 hours of repeated attempts and while I was searching online for answers and deals on replacing it, I kept trying. And tonight at 10:30 PM I didn't bugger about, I just held down the pilot for one minute, and then once the pilot remained lit on its own, as fast as I could I turned the thermostat to medium high and kaboom it lit up wonderfully. Maybe it dried out but I would not say that GE water heaters are a piece of Home Depot junk. As I said earlier I installed mine eight years ago and it has never had a problem and since tonight it restarted and I checked the tap and now have hot water. I suspect it will be fine but if I need a new one, eight years hasn't been a bad run. Just follow the instructions very carefully and repeat and repeat and repeat. Good luck.

This unit was purchased at Lowes on 11/22/16 and installed by our plumber shortly thereafter. Its not even 6 months old! It was poor at drying at first and then stopped drying altogether about a month ago. The GE Customer Service has sent a repairman here on 4 occasions in the past few weeks, sent faulty parts, including an element and a board (Im guessing that they mean a motherboard) but it is still swimming in water. Ive asked them to replace the dishwasher, to which they have refused. Yes we are irate, and rightly so. Whatever happened to quality manufacturing and decent customer service? I will never buy another GE product again. There should be lemon laws for appliances.Now we are being informed that the parts are back ordered until September, but that they might be able to get them from California on or about the 25th. Their apologies mean nothing when they do not back it up by amending the situation in an appropriate manner. By the way it takes 256 minutes for a full cycle. The plus side is that it is very quiet, but Im not sure how energy efficient a dishwasher can be that runs that blasted long. It doesnt clean very well either. If considering the dishwasher or another appliance, stay away from GE Is our recommendation.

Beware of GEs scam! My new house came with a GE microwave oven model JVM1630. It no longer heats food so I called GE repair. Heres basically what they told me: It is likely the magnetron tube and it is still under warranty, so no charge to replace it but I would have to pay $99.95 for the repairman to come to my home to diagnose the problem. If I decided I didnt want to repair the microwave, I was offered a $100 coupon toward a new one but it had to be a GE and it had to be bought on their website only. If I decided to go ahead with the repairs, the $99.95 would be deducted from the bill and I would only have to pay for additional parts and labor. I repeatedly asked for a ball-park labor charge so I could make an informed decision as to whether it was cost effective to have the repairman come out or just get a brand new one elsewhere. The person on the repair line hung up on me! I called back and I was told the same thing; that no one could tell me what the labor cost estimate might be. I asked to talk to a supervisor and same story. I didnt schedule a repair because I was taking a long trip and wouldnt be using the microwave anyway. When I returned from my trip, I called GE repair and again they wouldnt give me a ball park figure. Frustrated, I decided to have the repairman just come out and repair the darn thing and an appointment was scheduled for the next Monday. I had to rearrange a Monday day trip to Wednesday and set the repair appointment. On Monday, it was starting to get late in the afternoon, so I called to find out if the guy was on his way. A recording said my call was noted and I would be receiving a follow-up call. About 10 minutes later, Kim in dispatch called to tell me she had to reschedule the repairman to Wednesday. I explained I already had an appointment on Wednesday. which was already changed because it conflicted with the repairman coming to my home. She told me the repairman couldnt come because his truck wasnt safe to drive so that whole day was shot. The appointment was rescheduled for Wednesday and I had to again reschedule my other trip. When the guy finally showed up on Wednesday, he told me to put a glass of water in the microwave and start it. Ten seconds later, he declared it to be the magnetron tube. He was at my house about 10 minutes, just long enough to take my $99.95 credit card payment and to give me an estimate of $246.90 to repair the microwave which included the free magnetron tube, a $20 part plus tax and labor. The estimate had instructions on how to get the $100 coupon if I decided to buy a new GE microwave, which he said is what most people do. He didnt seem like he came prepared to repair the microwave at all. I was so frustrated and already out the $99.95, so I told him to go ahead and repair it. He said I should call repair to schedule him to come back to repair it! I told him to just repair it now and he said he didnt think he had a magnetron tube in his truck. I asked him if he would go to the truck and check! He did, and nope, no tube and he left.I think this is a great scam GE and maybe others have going. Its entrapment. They get you to accept a repairman to come to your home and charge you nearly $100 for it, but give you a coupon for $100 for a new one but it has to be a GE and can only be bought from their website where they can go as high as $500 or $600. By the way, I got on the website to find a replacement. My model had been discontinued and the only one in my price range was also a discontinued model. They charge $75 to come out to install it and another $30 to take away your old one. I called local appliance stores to see if I could unload my old microwave for parts and they all said the same thing: stay away from GE products.

My microwave was purchased 2.13, costing about $500. The panel shorts and I paid for one GE visit, $150. And it happened again. My friend was here and said hers does the same thing. She has a neighbor with the same problem. I researched online and learned quite a bit about this machine. I found out that the panel shorts when youre cooking under it, and steam/heat rises into the machine. Makes the panel short. Im now demanding that GE return $150 service fee that I paid before I found out that its a defective machine. And this machine has to be replaced with a model that allows cooking with vents on. If GE does not do the right thing, I will make it a life goal that no one buy their products. Mark my words. Im this angry because I called customer service this week and was told that theyll give me a new panel but I have to pay for the labor and no refund for the $150 and no replacement microwave. This was insulting. Shame on GE.

We have had the dishwasher for 4 years, and the dishwasher went out twice, the refrigerator also went out a few times. They just dont make stuff like they used to. To make matters worse it sounds like the fridge is getting louder and louder and I dont want to call the to call the techs back out.

It is a ten year old microwave and it works fine, looks dated and Ive never liked the start buttons location. We bought at the time of our kitchen remodel, good size and power for the money. Im sure newer models are just as good if not better.

Our new GE dishwasher is a disappointment. 1. There is water on the door after the dishes wash. 2. There is soap on the door after the dishes wash. 3. The silverware is often dirty after the dishes wash.I have observed the following: 1. The reason for the water is the silverware trays are made of plastic and do not dry. They should make them of coated wire like they used to. 2. The soap tray is often prevented from opening all the way by the silverware in the rack. They should re-design the bottom rack. 3. The silverware tray is too enclosed for good cleaning. It should be made of coated wire like they used to.

We purchased all GE Profile appliances when we built our house 4 years ago. The dishwasher, for the second time, has turned itself on and melted everything inside and got smoke in the house before we discovered it. I am afraid to have it repaired for fear that it will happen again when we’re not home or asleep. There seems to be a lot of people having this problem, yet I do not qualify for any recall that I can find. I am disjointed in GE to say the least.

My dishwasher is probably 15-20 years old. It only is run about once a week but is still holding up. Does a pretty good job of cleaning but I do a pretty thorough wipe down before loading. Great value for the money. Hope you get a stainless steel version some day.

I purchased a GE dishwasher on March 15th 2018... The first dishwasher I received on March 23rd was obviously broken. The dishwasher setting piece was completely broken off and the sides were dented and looked like it had been dropped. Ok. The delivery guys immediately called it in and reordered another one for me. A week later the second dishwasher came, it looked fine from the outside so I signed for it. Once I opened it I saw that the top rack was missing wheels and the second shelf wasnt even connected to the dishwasher. I called and a week later they came and got it and left a new one. I asked the delivery guys to unpackage it and look inside. Immediately the top arm cycle fell off and the HE symbol at the bottom popped out. They assured me that was normal... When the install guy arrived a week later he said he thought everything looked ok. He ran a cycle, then left. Before he was out of my driveway the cycle arm/water sprayer fell off and water sprayed everywhere... I brought the piece into Home Depot and they told me it was broken (duh) and they would order a new one. NO. This was going to be the fourth time I will be taking off work to deal with this dishwasher! GE is absolutely gone down. The products being produced are either being sabotaged by the employees from the Ohio plant, who are all losing their jobs because the plant is about to get shut down and is going to be moved to Mexico or GE is absolutely horrible at business, design and producing quality appliances.Regardless, I will NEVER purchase a GE product again and would never recommend to anyone to purchase a GE appliance! I am going to get a refund and insist compensation and inconvenience fees! I had to take off work 4 Times, had to cancel plumbers 3 times (still was charged). I lost money from my work, time from life and a month without a dishwasher. Also, a month with a broken one sitting in my living room because they wouldnt come get the 2nd and 3rd broken dishwashers until a I ordered another one and had that one delivered before they got the broke one(s) out of my house. I had broken dishwashers sitting in my living room for a month. Easter was quite embarrassing with an appliance next to the table to say the least. DO NOT PURCHASE GE APPLIANCES!!!

We bought a new GE microwave oven in 2007. It failed in 2018 after much, much use. We replaced it with a Whirlpool which failed in one week. Lowe’s let us return it and we bought another GE like our original and we are very happy with it.

Over-the-range microwave failure (model JVM2052, manufactured Dec. 2010) was purchased and installed professionally in March 2011. Total cost is $546. First, the fan failed in about June 2012 and I thought I can live with this. In Sept. 2012, the unit failed, but the interior light and clock still work. I paid $97.00 for a service call from the dealer, and the tech said the power source failed(?). Estimated parts and labor for repair is $370. So, I will buy a new unit (not GE) and pay about $150 for delivery and installation and take away this GE unit. I live in Morris County, NJ and this is not a rural area! GE service rep whom I called said GE doesnt service this area and to look in the yellow pages for an authorized dealer. I called again and got the name and address of the president of GE Appliances, and I am going to write about this product.

I bought a GE microwave two years ago. The microwave stopped working and has a message that the keyboard shorted. I called GE and they are charging me $90 to send a technician, plus parts and labor. I paid $250 plus installation for the microwave. I will never buy GE products in my life. Do not recommend to anyone.

I bought GE Profile dishwasher (PDT750SSFSS) from Home Depot on Sept 2014. First week it had some drying issue and GE service technician told no issue with dishwasher. After 4 months, electronic control board stopped working and GE service technician replaced the board. It worked for about a month and again same control electronic board failed and need to be replaced by GE technician. Again within a week again board failed for 3rd time. This time I asked for a replacement from GE since same board failed 3 times but GE refused to replace and told they can only repair and cannot give a replacement of dishwasher. Again for 4th time same control board failed now and I have contacted Home Depot for help. I dont know what to do this time and I dont want to repair this dishwasher anymore. It is only June 2015 and it had been repaired for more than 4 times. Ill try through Home Depot to get a replacement, if not Im planning to go through consumer court and file case against GE Profile. I would appreciate if somebody can help in resolving this issue and you can contact me through my email.

I purchased this dishwasher on April 2018 and from the beginning was not working well. I called a technician about 2 months ago, came with the computer and told me it is working fine, but my dishes are never well cleaned. Anyway on Nov 27, 2018 the water started coming out from my tiles and I didnt understand why? I kept drying and it kept dripping. I was so worried and called a handyman. He told me it is the dishwasher dripping water. All my cabinets, my tiles are wet inside. I have called and report it and today a technician was coming to repair it (which I will not accept.) I want a peace of mind. I need a new working dishwasher. Today, the technician was supposed to call me before arriving and I was 5 minutes away and left. Now, your customer service reps are telling me to wait till Tuesday. I am having guests and my house is a mess, I have the dishwasher in the middle of my kitchen, everything is stinking to humidity and all happens because of this BAD PRODUCT. I want this trash to be exchange as soon as possible.

GE over the range microwave JVM1540DP1WW - Within 1 year, the magnetron failed. I called the Sears service department to fix it. Because of that, I bought 2 more years of extended warranty. Three months after that, the microwave turned on by itself for 1 minute nonstop. I had to unplug it and call the service again. It would also turn on even when the door is open. Its very dangerous for microwave exposure!

I have an above the range GE microwave oven, model no. JVM1750M1CC. It has been in service for about 9 years. About 6 months ago it stopped working with an F3 code. The code claims the control panel needs to be replaced. I found that the price of the control panel was over $100 and the service call was at least $100. A little shopping around and I found I can purchase a new oven for about the same price. As the control panel is located just above the largest burner where water is usually heated to a boil, it receives a lot of steam. I visited a local church second hand store and purchased a countertop microwave and used it while I found a good solution. I decided to let it dry out for a few days and lo and behold it worked again. Unfortunately it only worked for a few hours, sometimes a full day and then I needed to let it dry out some more. I purchased an extension cord with an on/off switch and hooked it up. Now I can stop the electricity without having to climb up on a chair to pull the plug. Once I was set up with the easy on/off switch I could easily reset it. After about a week of resetting, it got the message. It has been working properly for over two weeks now with no failures.

We bought our first home a couple of years ago, and it came with brand new appliances. Never in my mind did I think I would need to buy a new microwave after 2 years. Our GE microwave stopped working after 2 years. I had microwaves in past that lasted for 10 years or more. Never again will I buy a GE appliances again. The quality sucks. Don’t waste your money.

I purchased all GE Profile & Café appliances when we remodeled our kitchen in 2012. The DW has never cleaned well. I have contacted GE through email several times and now I have to handwash all of the silverware and re-wash most of the dishes. At times, glasses and silverware come out worse than when they went in. We have checked the water temp, pipe size. We use recommended detergent and finish rinse. We had a service call from a reputable appliance repair person, we purchased the recommended citric acid and performed the recommended protocol. This thing stinks! GE recommended another service call. I had a 20+ year old KitchenAid prior to this and it worked like a champ! Never an issue. I am ready to toss it out and buy something else (but it wont match!). Any suggestions?!!