We installed a GE Spacemaker Microwave Oven /Range Hood in 2005. We used it mainly for the overhead light over the range, the timer, the vent fan, and only occasionally to microwave vegetables. On 8/5/2011, I put a dish of eggplant in a glass dish to heat up and the microwave shut down completely to the point that I had to check the circuit breaker to see if the switch was shut off. The microwave and everything associated with it is dead.

Dishwasher is very loud. Even on the longest setting, it doesnt get the dishes clean. The rack system, both top and bottom, isnt set up to handle a lot of items. Very poor quality and design.

The GE repairman just left. It wasnt the coil that was flaking, it was the eco dish washing detergent I was using. The detergent wasnt dissolving, it was clogging up the jets and burning on the coil. What I was seeing was black burned detergent flakes. The repairman gave me citric acid to use to clean out the clogs (for free). He also didnt charge me for the visit, even though it was my fault. He also told me to get the water in my sink really hot before I start the dishwasher. I am very impressed with his service!

Very convenient. Easy to use. Take some time to clean though, have to cover all food for splatter of food on the topside inside of microwave, have scour off with strong pad. Also it is not radiation free for health. But the microwave is easy to lift. The best thing about it you can cook frozen foods. Like meatloaf, beef stew my favorite, pizza, chicken.

Periodically my GE Profile Dishwasher will not clean well. On every occasion it is due to clogging of spray ports on the upper and/or lower spray arms. Removing the blockages is nigh-on impossible as it is often not possible to extract the blockage from the outside and its not at all possible to flush the blockage back down the arm to extract it at the centre. All that is required is a bit of forethought and the creation of some access to the arm. I was frankly surprised to not be able to find a replacement arm as the suggested solution to this problem, the additional part revenue being part of GEs the business model. There are a number of other design issues with the assembly at the bottom that make me think it was done by an intern and nobody checked her work at the end of summer break before it went into production.

We moved in to our home in 2006 and it had a GE Monogram Microwave built in. The microwave died and I purchased a similar GE Monogram microwave to match our kitchen in 2014. That microwave died exactly 17 months later. Fortunately, we had a home warranty program as we are selling our home. I figured that this saved me the effort to complain to GE about their product... Wrong. The Home Warranty program sent a repairman who said we can order a part. A few days later I received a call that they would replace the microwave. OK... I checked online as well as with a local retailer to see which model is the replacement model, and trim kit. Today (about 10 days after I first called for service) they delivered the new GE Monogram microwave and installed it. Fortunately, I asked to test it and we tried to boil a cup of water. The contents in the oven being cooked were not visible. Either the light was too dim or the shading on the door was too dark. I have never seen a Microwave where you could not view what is inside. I called GE Customer Service while the installers were there and they refused to allow me to keep it until a replacement was delivered. They had to deinstall it, re-install my old (non working unit) and take the new one back. I called GE with my homeowners claim info and they sent me back to the Homeowner Warranty company to start the claim all over. Ridiculous.Instead of a replacement they offered me a cash value which was 60% of what I paid the retailers. When I asked why that amount? They only provide the value based on what the Warranty company gets the products/services for (wholesale cost). Net: If I used the money to buy another product it would cost me out-of-pocket for replacement. I am hoping the new unit to be delivered in the next 3 days works better. Otherwise, GE has a significant design flaw that doesnt allow you to view what is cooking in the Microwave. If thats the case, why have a window at all? Fyi - My Panasonic Microwave in our basement is working fine.... and has for years.

Today my GE black microwave with rack mounted above the stove, caught on fire by itself. My husband and I smelled a chemical like smoke. We went in the kitchen and we saw fire in the microwave. We put out the fire and was thankful that we were home. If we were not home our house would have burned to the ground. The microwave was not in use at the time of the fire. I plan to contact GE about this dangerous event. My asthma has gone crazy since this horrible situation happened. I just want to let people know that GE microwave will catch on fire without being in use.

This is one hell of a dish washing machine. You really need to think about getting in on this thing at the ground level. You put the dishes in dirty and they come clean! Holy**!

I have had a fridge, a washer and a microwave oven from GE. I have been so disappointed in all three, but the microwave oven disappointed me the most. The door broke around the handle and the hinges, and was replaced shortly after buying it. Then it broke again and I replaced it myself. Then it broke again. This makes me not want to try another GE product. The fridge shelves all broke because they were plastic. The washer fell apart shortly after a year. It is just myself and my husband using them, so they should last for years. When you buy large item, you would like them to last a long while.

This is the second time GE has replaced the unit. The paint is peeling. The microwave is all rusty. The same thing happened to the first one too. It looks disgusting.

Purchased an entire kitchen suite of GE appliances. Almost instantly the fridge started making loud noises which the repairman told me was normal. LOUD AND OBNOXIOUS. I wear earplugs in my house to avoid the noise! Secondly, the dishwasher started leaking and the warranty company is refusing to honor the warranty so Ive been hand washing dishes since August! They also refuse to refund the extended warranty fee. Currently filing a protest with consumer fraud. STAY AWAY FROM GE, isnt that a shame! THEIR PRODUCTS ARE JUNK!

JVM1540 - We replaced the microwave that came with our home above the stove. When we took the old one out, the blower was not installed properly for ventless. We thought that had to be the reason it just stopped working. We felt sure it wasnt GEs fault as we have always trusted them for a quality product worth the price. WRONG! I cant help but wonder if Lowes knows they are selling a costly piece of junk! When our new one quit working, we replaced the fuse 3 times, now it says keyboard is shorted service required. And thanks to this site I am tossing this piece of junk without spending any more money. GE shame on you!

This dishwasher is less than 4 years old and the rack is rusting away. It seems like it happened overnight. I didnt notice anything and then all of a sudden the first is everywhere! The metal inside of the plastic is even disintegrating. It seems like it was rusting before the plastic coating came off. The only good thing I have to say about this dishwasher is that it is quiet. At 4 years old I dont think I should be having to replace both teams!

I am now facing my 5th repair appt about my 2 year old microwave. I have spent nearly $300 on repairs to be told I can purchase a new one for 50% off. Well, $426 plus my $275 I have paid IS A NEW One! 20 hours of me having to be available for service. I did not know the life of this appliance was 2 years. GE complaint number **. This is an unacceptable resolution offered by GE!

The dishwasher runs and works very well. It washes all dishes, pots, pans, glasses and silverware great. Weve never had any problems with this dishwasher thus far. I would recommend this dishwasher to anyone in the market.

This dishwasher is cheaply constructed with a plastic interior. It is so loud that we run it when we are away. Its impossible to watch TV while this thing is running. Also the dishes come out with a film on them. Not happy with the low grade appliance at all.

I purchased the unit just over a year ago and it started beeping one night with error scroll speed and then key pad shorted. In the end to repair costs more than to replace, even though it is above stove mounted unit. Do not buy a GE Microwave. Especially model # JVM6172DF1WW.

Bought a new GE over the range microwave in April 2021 and it broke/stopped heating July. They replaced the magnetron in September and its broken again a month later. Same issue and parts are out 2-3 months.

We purchased a GE JVM6175EFES microwave oven in 2014 and are now on our 4th unit. When cooking food, condensation forms and drips down the wall behind the microwave. GE replaced it with another, but it was a rebuilt unit which when operated caused sparks and smelled of something electronic burning inside. So another unit was ordered and delivered damaged. Now after a year, the 4th unit is once again causing condensation on the back wall. GE has no answer or explanation for this problem and really doesnt seem to care. This is just one of several problems weve had with GE appliances. We also had to go thru 3 refrigerators to get one that was not damaged from the factory. We will be trying to replace the microwave with a different model, but doubt if GE will work with us to get this resolved as their customer service has been no help at all. DO NOT BUY GE appliances.

Most microwaves Ive tried are pretty similar in performance, except in the case of cooking microwave popcorn. Most are horrible with their preset popcorn button. However, the more expensive GE model that I bought from Lowes has done the best in that area. And, it is one of the better looking models also. I prefer the stainless ones.

Bought a PDT845SSJ2SS in June. Two months later, it has a leak. Good news, has a leak detector which shuts down the machine. Bad news is that it leaks and the leak detector worked! Called GE. We dont have an authorized service technician in your area. We will get back to you within 3-5 days. Three days later, after I had raised rain with my appliance dealer, he arranged for a local dealer to come look at the machine. Scheduled that appointment - it was Friday, and We only come to your area on Tuesdays and Thursdays. Next Tuesday is booked, so we will try for Friday. Then, someone from an organization called Platinum Services calls and says GE has assigned the ticket to them. Shes going to try to schedule a diagnostic appointment in the next 7-10 BUSINESS days. Told her to forget it (found out she was calling from Lowes and had to find a technician before she could schedule.) End of week 1. Following week, someone else from GE calls and asks if I was cancelling my service request. In the course of the conversation, she asks to confirm the model GE RANGE that I have. Kinda lost it on her... On Thursday serviceman from local dealer comes. Turns on the dishwasher - it leaks exactly where I had said it would. Need to order a part and GE will not expedite. End of week 2. Next week - crickets. Nothing, Nada, mushroom mode (in the dark and being fed BS). Called my appliance dealer today and told him to come pick up the dishwasher - says he cannot do that. I explained, “I will forfeit the money I paid - I dont want a dishwasher that leaks in the first two months of use.” He tell me GE released the part yesterday...whatever THAT means and he HOPES repairman will come next Tuesday to repair. So, I have had a new GE dishwasher for 3 months and it has only worked for 2. Be aware! I assume partial responsibility for this goat rope - I faithfully refer to Consumer Reports when purchasing appliances and electronics. I suggest you do the same... you will find GE listed AFTER BOSCH, KITCHENAID, KENMORE and others. Also, realize the GE brand is now a CHINESE company. Caveat Emptor!

This is the second GE microwave. In 2 years I have had that, the paint peeled off inside the microwave in sheets! I contacted GE the first time and was offered no help or explanation. I was told it was an older model, even though I bought it new. This time, I just chose to throw it away and never purchase another GE appliance again!

My 5 years old over the range GE Microwave Oven in my old house had a keypad malfunction. I replaced that oven with a different brand. This time, my 2 years old GE profile microwave in my new house has the same keypad shorted like other users posted. I was hesitating to buy this brand at the time. But the look and match with other appliances, plus the good deal from vendor, I gave it another try. I made a terrible mistake. No more GE appliances for me.

The microwave overall is good. It looks very good. I think that the price was good as well. I would certainly recommend this item as an item to buy. So far it appears to be well built, I have not had any problems with it.

Needing some type of warning to indicate a clog or break down. Cycle: Pots & pans; heavy wash; normal wash; light wash; hot start; high temp. wash; heated dry; energy saver; cycle on: plate warmer; start delay (hrs) off, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1; Hot start plate; Pots & pans start; heavy/normal; high wash; heated dry off-rinse only. The color fits my kitchen arrangement. Needs to have a better warranty coverage. Needs a longer warranty on the basic coverage. Do away with extended coverage. Offer all parts and full labor for a longer time.

I have a 2011 GE Model # JES1456BJ05 microwave and it has been gently used and kept clean. Upon cleaning today I noticed that the top of the inside is blistering and peeling off. Surely this is not safe as it could fall into food, plus they should make them to stand heat, after all this is why they are made for heating things. I called GE who informed me that there is no recall on them so I am pretty much stuck to go out to buy a new one with no help from them. I now read that this has happened to people before. Lesson learned never purchase a GE microwave as they do not stand behind their products when a manufacturing problem develops if you are the first one to call, and beware and ready to buy a new one every 2-3 years. This is all they are made to last!!!!!

I am a licensed master plumber. I do a fair share of high end kitchen installs, I noticed that in the last 5 years that all GE dishwashers I installed had a whole lot of extra parts to be installed by the installer. For example. Today I uncrated and tried to roll a GE dishwasher I got 6 and a drip tray fell out. Then when I went to install the dishwasher in the cabinet I had to install 4 different rubber flanges. When I went to push the dishwasher in the flanges came loose and hindered the install. The the insulation jacket kept binding up. The last 10 of these GE dishwashers I have installed the dishwasher appears to be racked or not square. I had to tell the General Contractor that I dont want to install the GE dishwashers any more. Way too much trouble. I have much better luck and ease of installation with Miele and Bosch. The GE dishwasher are very frustrated to install. Bob Licensed Master Plumber since 1982Richmond VA

GE dishwasher model # GDF610PGJ5BB was fine the first year and a half. It began making noise with electronic control panel beeping for no reason. The wash cycles were incredibly long. Finally after reaching the 26 month mark, the electronic panel gave out. Having no warranty, I called the repair division of the appliance store we had purchased it from. They were to charge me $90 just to come out and look at it. With the purchase price just under $500, I wasnt willing to take the chance of repair costing a third or half of the purchase price. Regretfully, we decided to give up on repair of this dishwasher. We decided to purchase a new dishwasher, but certainly not a GE.

Two years ago, after owning a GE JVM1490 microwave-convection oven (over the stove) for three years, the door handle broke.Let me clarify that I worked for GE first as an engineer, later as manager, for 20 years including 6 in Major Appliances. I am ashamed of what I am reading how GE is treating customers today.I am perfectly capable of replacing the handle myself if I am provided the complete and correct assembly drawings and/or instructions. GE refused to provide me anything when I requested them. The scant drawings and instructions I found online are insufficient. As a matter of fact, the design is so poor that removing the internal bezel, which you must do to reach the handle fasteners, forces you to break the mounting tabs, requiring replacement of this part plus the handle. This was confirmed by the parts store I visited.However, even after removing the bezel, neither I nor another ex-GE appliance engineer could figure out the access to the fasteners. I have glued the handle three times using epoxy and Cyanoacrylate (super glue), but it has broken off a fourth time. I will figure out a way of fixing it before I pay GE close to $100 for both the handle and bezel. And if I replace the appliance, you can be sure it will not be GE.GE should be ashamed of the poor design and deplorable customer service they are giving now. How things have changed!My suggestion is that all with this problem post name and phone number of GE customer service personnel they spoke with.

We built a new home and selected the GE appliances including dishwasher, fridge and microwave thinking they were good brand. NOT. Fridge fan replaced twice, dishwasher 6 issues already, replace seals twice, entire door changed, no water, not working inside, internal latch wont release the soap and now, no water again. Just waiting for the microwave to stop working. Their appliance are terrible, built with poor quality and all are lemons. Im calling tomorrow to get my dishwasher replaced after 6 repairs in a year. I would not recommend to anyone to purchase GE appliance, worst ever. Now, Im worried they will say Im out of warranty since its now past the 1-year, but the problems under warranty have never been fixed. One fix causes another. I have documents to show my purchase in my new homeowner file.

Microwave lasted 6 months, very light duty, burnt metal smell. Purchased from Walmart, they told us to contact GE. All GE could offer is a Good Will certificate which means, we have to go buy another GE microwave up to $155 in value. We pay taxes, shipping etc. Not really a customer-centric return policy for a lousy designed product made from cheap components in Asia. These microwaves are a piece of junk. This isnt the only complaint about this model of microwave. Others are experiencing the same problem all within the past 6 months. From March 2018 thru August. Stay away from these microwaves.

Bought all new General Electric Appliances in 2002. Dishwasher, Washing Machine, and Dryer replaced after 6 years. Handle on Advantium Microwave replaced twice at the cost of $50 for handle made of plastic? Today our house smelled like burning plastic which upon inspecting dishwasher, found the heating element was COOKING everything in dishwasher. Got so hot that is melted the silverware bin and anything plastic in dishwasher. Glad we were home to unplug unit which we could not reset the controller on door of unit. Consumer Product Safety Commission is aware of this incident and is VERY common complaint with this Manufacturer. I have been on hold for 30 minutes with GE consumer relations phone number 1-800-386-1215. Was told by automatic system wait time was going to be 5 minutes. Figured I would write complaint on here as well while holding...READ CONSUMER REPORTS and stay away for General Electric Products!!! Model Number is PDWF480P00SS. Serial number is GS734641B.

GE Cafe Microwave CVM2072SM2SS - The touchpad stopped responding, like many other who have had this issue. GE would not give me a break on replacing the main and supporting circuit panel as suggested by the technician, so I had to pay out $500 on my own. After less than a year now the microwave wont heat. I liked the units looks and display but if it wont work, its useless.

I bought GE Microwave JES1139BL03 in 2011 and the white paint inside has been peeling off. I think it is defective because I have had other brands and none of them have done this. This microwave was manufactured February 2011.

I got a GE cafe two years ago, all the matching appliances. A few weeks ago, we heard beeping in the middle of the night. ow every night at two am we get a message on the panel with annoying beeping. This weekend, we went out of town and when we returned the microwave was and had been on for a very long time. It doesnt take a genius to figure out that our house could burnt to the ground while we were gone! Thank God it didnt! Not to mention. my dishwasher does not clean! It takes 3 runs to wash.

Enamel curdles and becomes unattached from the ceilings of the interior of the microwave. Family member purchased 3-yr. newer model and the same thing happened. Theirs makes a terrible noise while cooking! Inferior product - inferior, unreliable materials!!! No accountability or sign of improvement! I will never buy a GE product again.

My dishwasher is a GE Profile. It is as quiet as a Bosch we had in another home we had but it must cost half as much. We have it 8 years now- no problems. Never had a service call or anything wrong with it. It owes us nothing.

Purchased GE Profile dishwasher model PDT750SSF2SS, received three weeks ago. Within 17 days, door developed issue where it would not open fully. GE contacted, company not too responsive, miscue with technician, failure to reschedule, unknown when it will get fixed. Purchased as a complete set (dishwasher, range/oven, refrigerator, microwave). Does not say much about GE quality or service. Would not purchase again.

We bought a GE dishwasher July of last year. In December it started to shut off some off minutes into the cycle. FOUR months this piece of junk has not been working. Three times someone has been here to say oh it should be working. They are sending someone out for a 4th time now. Should have already been replaced.

There was a recall on my fairly new dishwasher. The heater was causing fires. The repairman came and said I had to remove my ceramic tiles in front of the dishwasher for him to pull it out. I called customer service and a Tina offered to reimburse me $200 to have someone remove the tiles and pull the dishwasher out. I paid a handyman $250 in cash to have it done, called GE and they sent a man to fix it. I called again for my $200 and explained their man fixed it. They now wanted a bill from my floor man. I sent the bill and they refused to pay because the bill did not say paid. I called and asked them how their repair person could have fixed it if the floor had not have the tile removed and the dishwasher pulled out for him. I said, Ask your repair person to verify that the tile was removed. The answer was they couldnt ask him. I sent the bill again with a note saying paid in cash, a picture of the floor and a picture of me - a 74-year-old woman with a note saying it was impossible for me to have ripped up the ceramic tile and backer board myself. Again, I got a reply that the receipt that I sent was not acceptable and the case was closed.

We bought 6 new GE appliances when we purchased a new home. The reason: my husband worked for GE for 35 years and we wanted tell our friends how happy we are with them! Now, we are sorry we have to complain about the dishwasher (Model #GDWF160R1OSS). The only good thing about it is how quiet it is. We have tried many different soap products, a little soap, more soap, Rinse Aid, half clean or nearly clean dishes placed inside, only to have the glassware looking horrid, not clean and cloudy. Service man offered suggestions but none have worked. The stainless steel interior also looks horrid because of streaks. So much for energy efficiency when we have to wash all our glassware by hand to get the residue of soap off them. Another dishwasher we have had for 25 yrs. does an excellent job - so dont blame it on the phosphate removal from soap.

Very easy to clean. Also, very reliable product. Its a built in above the stove, various levels of cooking and I love the 30 sec button. Black turntable with built in clock. Ive owned several GE products and find them very easy to work and user friendly.

I purchased a General Electric model peb7226df1ww in 2013. It lasted two years, then failed. I replaced it and two years later the replacement failed. At least GE microwaves are reliable in that aspect. You can count on them to fail. I am convinced GE installs a delayed kill switch on their microwaves to help their revenue stream. This was the last GE appliance I will ever purchase.

We bought a new GE dishwasher 28 APR 2020. I noticed it wasnt working right about 5 months later. We are just over 1 month from the end of the warranty. The store where we bought it has been fantastic, but theyve been out 5 times to try to fix this sucker and they cant. GE told ME they would replace it if the store called to say they couldnt fix it, but when the store called, they refused. Theyre sending the repair guy out yet again one week before the warranty expires so he can call them and theyll talk about it while hes here. Ill never buy another GE appliance again.

Looks great after 7 years, still works good. Could use larger drawers and the soap dispenser hasnt opened a few times. After 5 years of use weve had to rerun the to clean the dishes.

I bought this over the range microwave in 2009 to go with my other Cafe appliances (dishwasher and range). After a few months, it stopped working and ge sent a repairman to fix it under warranty. He took it apart, replaced the touchpad panel, but told me that the old panel was still good and that I could keep it for the future in case I needed it. And I did. It stopped working a year ago. I took the whole machine apart, put in the original touchpad, and it worked. Until about a week ago. I went away on the Fourth, and when I returned 3 days later, I had the same problem for the third time. I just called ge service and was told that the replacement for the touchpad is $600. When I started to say that I could buy two Microwaves for that amount, the ge service person cut me off and asked if she could help me with anything else. Rude. In addition to this, the Cafe Range ($3000) has three unusable knobs because they were made of cheap PLASTIC and are cracked.They just spin and turn nothing on. When the third one broke, my wife had turned on the power boil and was unable to turn it off until I came home 2 hrs later. A huge FIRE HAZARD!! To replace the six knobs is, you guessed it, $300. I could buy an inexpensive stove for that. I have purposely used ge in lower letters because that is the way I feel about their appliances and their service.

This dishwasher was provided in our new manufactured home. It is the cheapest and loudest dishwasher I have ever had. But to be fair, I didnt pick it out. My friend just bought a new Bosch dishwasher and returned it because it didnt come with a heating element! Make sure (with the new energy saver models) that it comes with a heating element! Spots all over her glasses!

We upgraded our appliance package when we bought our village builder home 8 years ago. All GE Monogram appliances have rusted and now need replaced. New liners needed in oven which was so rusted we couldnt get the screws out to replace the originals. Was told by GE customer service rust to be expected when cooking. It creates steam and food particles can cause scratching!!! Maybe it should be steam proof especially a microwave. Even the door on this is rusted! Why the shelf ends in a freezer are rusted not sure on that one! Will NEVER buy this brand again and shame on them my upgraded appliances dont even make it to 10 yrs. A disgrace. My mother just replaced her 20 yr old oven. What is wrong that nowadays things dont last 5 minutes? Shame on you GE not recognizing a definite flaw in your products.

My 11-month-old GE Advantium oven no longer has any display, totally blank. When calling to make an appointment I was unable to speak to a live person but scheduled one for today from 1-5 pm. At 5 pm I received an automated call that the technician was running behind and would arrive in about an hour. By 8:30 pm no one called or came to repair my oven. At 4 pm when I was wondering if I would see a repairman I attempted to find on the internet a phone number that would connect me to a live person but had no luck. I have no idea what company is being sent out to make the repairs so that I can get in touch with them. Their service sucks.

GE 1.6 cu ft over the range microwave. It performs well and has multiple options preprogrammed on keypad. The only challenge was installing and change over to an outside back exhaust (horizontal) to a vertical in wall duct.

We renovated our kitchen with all new GE Profile appliances in 2017 before moving into our new house in 2018. Nov 1, 2018 our GE Profile stopped working and showed a leak message. We called GE who referred us to A&E Factory Service. The repairman arrived Nov 6 and proceeded to not be able to pulled the dishwasher out and tell me the list of things he wont do because of policy. Without inspecting the dishwasher but looking at his computer with the list of things that could be wrong, he said he ordered two parts and would return on Nov 23. Nov 23 came and no repairman. Calls were placed to GE Parts and Service who expressed their disappointment over the no show then proceeded to say that parts would not arrive before Nov 30 and that one of the parts was on back order. Once the parts came then another repair appt could be made. I will have been without a dishwasher for over a month with no alternative recourse. Service response and A&E Factory Service is less than poor.

We did not choose our dishwasher. It was installed by the builder but its served us well for the last 3 years. Its good quality and cleans the dishes well. It is also relatively quiet while its washing.

We recently purchased our second dishwasher in 16+ years (the other one (a Kenmore) is still running fabulously but staying with the sale of our former home - however I am tempted to swap it out with this new one from GE). This beautiful inside and out dishwasher has a couple main flaws that has me wanting my old dishwasher back. The buttons on the front are super sensitive, causing it to come on countless times a day as we get items out of cabinet above. This is not something we thought about. Our old one had the controls on the front but they were under plastic that you pushed... not actual buttons like this one.The second issue is minor. The rack on the bottom is set up very wide on one side and our dinner plates are smaller than some and they do not sit firmly in between the tines. The spacing is great for larger plates or serving items but not for medium size plates. We use a lot of bowls so the other side with closer together tines is always full. Like I said just a minor flaw. Lastly, the unit puts off a high-pitched sound during certain parts of the cycle. It is not really loud but it is bothersome if we are still in the kitchen when it is running.

On 05/20/2014, our GE microwave over the stove unit burst into flames. My wife was using timer and walked away then turned around and heard the microwave fan start (spontaneously). Then she observed flames/smoke reflected in the Microwave window. She observed the interior of the microwave was aflame. The fire was extinguished with a rag & water. The burning items appeared to be plastic/insulation. The fan from the microwave was with the burning insulation on the rotating plate. Had this unit only 14 months during that time the microwave fan would turn itself on for 3 minutes and then turn off all by itself. Happened twice in 14 months. Glad we were at home and were able to extinguish the fire. Called Lennar the builder who put this unit in to take pictures and check electrical. Was told the GE unit was bad to call GE. I know this will be a hassle as others have had this same problem with not so good results.

Does not clean well nor dry well even on the more powerful cycles. I rinse off all the food and if anything is accidentally missed, it just gets baked on. Very disappointing. Also much of the upper rack item remain very wet at the end of the cycle. Drying issues: I use the most powerful drying cycle option but contents remain wet at the end of the cycle, especially plastics and top rack utensils. Not just damp, but large drops of water remain. Cleaning issues: Even when I use the heavy cycle, unless I remove all traces of food from the contents, the food remains and worse, now baked on. This model has a sanitized cycle so basically I use this dishwasher to sanitize only rather than clean, dry and sanitize. Completely unacceptable.

This is the second digital microwave I have owned. Both of them have been GE brand. There is nothing fancy about them but they are very Easy to use and get the job done. The first unit lasted about 15 years before it had to be replaced. It was used almost on a daily basis, so I feel I got my money’s worth from the unit!

I was sitting on my couch and I heard something running. I walked into the kitchen and saw my GE Profile microwave was running. At first I doubted myself and thought maybe I did something and then I cleared it out and went and sat back down. It did it again and again several more time. This is very scary. It was running like someone had set it and it was getting hot inside. Im not sure what else to do. The last time I had the same type of problem and just bought a replacement microwave and now this one is doing the same.

I bought a GE microwave in June 2011. Paint started peeling off the inside top soon after purchase. Now, all the paint is gone and GE doesnt care and Walmart wont replace it. So today, I bought a Panasonic. Maybe it will last. Its fifty dollars cheaper, too.

GE Model PDW9280J10SS Fire - Many GE Profile dishwashers have been recalled during the same time frame as the model we purchased, but it is not listed as one of the recall models. Just as many other complaints, ours started to smoke out of the top of the front door and filled our house with smoke. Thank God we were there to shut it off. The next day I opened up the front door to see what had been burning and it had holes burnt in front and back of the main circuit box (for lack of better name), one burn mark right where the main wire harness plugs in and burnt right through it. This is the same description many others have written. There is a problem with all of these Profile dishwashers purchased between 2006 and 2009 (ours 2007). If we had not been home, who knows what would have happened?

My microwave was purchased 2.13, costing about $500. The panel shorts and I paid for one GE visit, $150. And it happened again. My friend was here and said hers does the same thing. She has a neighbor with the same problem. I researched online and learned quite a bit about this machine. I found out that the panel shorts when youre cooking under it, and steam/heat rises into the machine. Makes the panel short. Im now demanding that GE return $150 service fee that I paid before I found out that its a defective machine. And this machine has to be replaced with a model that allows cooking with vents on. If GE does not do the right thing, I will make it a life goal that no one buy their products. Mark my words. Im this angry because I called customer service this week and was told that theyll give me a new panel but I have to pay for the labor and no refund for the $150 and no replacement microwave. This was insulting. Shame on GE.

Bought brand new GE Profile DW PDT845SSJSS as part of four appliance package to be installed as part of kitchen renovation. Bought in April 2018, renovation delayed until August 2018, install of appliances October 2018, installer by contractor plumber- excellent seasoned experienced installer. Never used DW until moving things into new kitchen. Washed dishes off in DW before placing in cabinets. After 3rd cycle- DW stopped working stating leak detected - contact GE. Are you kidding me? Brand new appliance! We had original installer come out- no leak- no visible water- we went to placed we purchased DW from - local place - Ray’s Appliances- asked for replacement DW. Was told we would have to pay for installation of 2nd DW at 225 charge. Are you kidding me? GE guy came out and did something to DW to fix it but said problem could return... Serious??? Well -DW worked for a few cycles- now displays leak detected again! Called GE and coming out 12/2. Ridiculous- I want a NEW DW with free installation! I’m paying @971 bucks for something that didn’t work from the outset!!!

First of all, I wish I had seen this site over two years ago and I wouldnt have purchased a GE product. But, that is spilled milk. My two year old microwave, GE 1750 over the range, started running on its own. I disconnected it and called GE and asked if they had experienced any problems with their product and if this was a fire hazard, the nice young lady put me on hold and did research and stated that no reports of a fire hazard or running on its own. My husband encouraged me to do my own research and guess what? shocking, I was lied to! There are reported fires on the news and a law firm has a class action lawsuit against GE! I guess because this appliance wasnt in the nice young ladys moms house it wasnt of importance to inform me of the fire hazard? GE is off of my list of products I would buy!

I bought the GE dishwasher in the slate color, just after a colleague at work did - within a few weeks of each other. Hers has already been repaired twice and is still not working. Mine was installed last week - and did not work even one time. No water getting to it. Had the connection checked and installer confirmed the dishwasher was defective. Im sending it back and want nothing more to do with GE products. I wish I had seen/looked for these reviews before I bought it.

I wasted my whole day waiting for GE Technician to come. Nobody called me to let me know that they are not coming. I have to call them only for a Mr. ** to tell me that they had rescheduled the appointment for another one week without notifying me. Good job that GE APPLIANCES are doing. You remember the so called TOO BIG TO FAIL? It means, they can do whatever they want at whatever time or day they want. I dont have a vent in my house and that means I cant use the stove. Is this ridiculous or I am missing something here? Is it TOO BIG TO FAIL? Yes, I forgot that. I will be staying in a house with a new GE APPLIANCE that has not been working for the last one week and have to wait for another week. Mind you, this Appliance has been used only for barely a month. Is there anybody out there who is facing the same problem or its just me. If there is nobody going through the same experience, an excuse like there are no Technicians available to come to your place and do the job. If there is anybody out there who has trust in GE appliances like I did or even thinking of getting one. Be aware that you will be through what I am going through and there will be no technician available for another two weeks. Be ready to wait for they will reschedule your appointment without letting you know, why? Because theyre TOO BIG TO FAIL. What will you do? Wait until they decide to come, if theres a technician available. I just realized that GE means GO ELSEWHERE. Thanks GE for the good job.

I had a new house build and it came with all GE appliances. The dishwasher Model GDT530PSD255 was not drying the dishes and the run time could be as much as 3 hours. The service man was there with in week. He said the dishwasher was working properly. After running through the cycles he said its working just fine. I open the door and it was all wet and the silverware tray and the silverware was wet and some soap was still on the door. He said everybody complains about the same thing. High efficiency Dishwasher have long run cycles and most dont dry to well. The silverware trays hold water because the tray sides are flat (horizontal) and that holds about a half of cup of water. All they have to do is put them on a 45 degree angle and the water will run off. Apparently it worked well on paper and no one actually ran it through its cycle. Needless to say I hate this dishwasher and its almost at the point to do them by hand. A lot of time is spent drying off dishes and silverware.

G.E. Spacemaker over the stove microwave. This is my second microwave of this type in 14 years. The first one lasted only 5 years. Im satisfied with the product albeit the price tag is too high.

Ive had this dishwasher for about 3 1/2 years now, and never have I been so dissatisfied with a product. I gave a review then, was contacted by a GE rep, followed their guidelines, even had a GE rep come out and review the problems. We changed our hot water temp, when we did dishes (not during clothes washing), checked to make sure the blades are not hindered, changed soap to Finish Gel (works best), added rinse aid. There is just not enough water to rinse off the dishes. Period. I do not add more heat/dry, and use Sanitize and Steam 99% of the time.What happens is the food sticks to the dishes and melds into them, causing permanent discoloration. This is no pot scrubber. It does no scrubbing! I have to wash my pots every time after I clean them in the dishwasher even if I pre-scrub them clean before washing! Sometimes the food from other dishes or the soap dumps onto the clean pot and makes it dirty! There should be a lawsuit against this company for this product. Its horrible! BUYER BEWARE! This rating should really be a 0 (zero)! Sorry I am not submitting proof of purchase from that time. We remodeled our kitchen in 2012.

We recently purchased a new GE microwave and are pleased with its service and price. The microwave is attractive and seems to be constructed well! We would buy another GE product and feel that they provide quality in appliances!

GE above stove microwave (DVM1850DM1BB) stopped working and went completely dead after 1 year. Purchased a second GE microwave because it easily fit into the existing space. Sure enough, the second microwave stopped working and went complete dead a little over a year. I have always heard bad things about GE products, now I can confirm those negative comments about GE products are true.

I purchased this dishwasher on April 2018 and from the beginning was not working well. I called a technician about 2 months ago, came with the computer and told me it is working fine, but my dishes are never well cleaned. Anyway on Nov 27, 2018 the water started coming out from my tiles and I didnt understand why? I kept drying and it kept dripping. I was so worried and called a handyman. He told me it is the dishwasher dripping water. All my cabinets, my tiles are wet inside. I have called and report it and today a technician was coming to repair it (which I will not accept.) I want a peace of mind. I need a new working dishwasher. Today, the technician was supposed to call me before arriving and I was 5 minutes away and left. Now, your customer service reps are telling me to wait till Tuesday. I am having guests and my house is a mess, I have the dishwasher in the middle of my kitchen, everything is stinking to humidity and all happens because of this BAD PRODUCT. I want this trash to be exchange as soon as possible.

Cleans ok but not sure if its detergent or dishwasher but never seems to get all dishes completely clean. It may leave a ring in my tea cup so sometimes Ill have to clean it slightly to make sure it comes off. Basic settings on mine, nothing special. Good for plates and some Pyrex cookware but it would be nice if I could put larger pots in it. Very basic white in color but it is over 10 years old.

When we bought our house we upgraded our GE appliances to stainless steel. I had no problems with the dishwasher until a few days ago. Then it stopped working completely. As with most of the complaints I have read the control panel was not working. We took the front door apart just to see if the dishwasher was worth salvaging or should we buy a new one. A screw was NEVER installed on the vent assembly to hold it in place. The entire inside if the door was corroded by steam and/or water. So every wash slowly degrading the electronics. 18 months, 6 months past its warranty where now its out of their hands and you can pay $89 to have someone just look at it. We were lucky it just broke because this hidden mistake on their part could have not only caused a short circuit but a fire. Like so many of the other stories. I will not buy GE again.

Microwave Oven-Space Saver Model JVM6172DF1WW - This is the same problem that is well documented across the web regarding this POOR General Electric product. I purchased the microwave about 14 months ago and the keypad abruptly stopped working. After checking the electrical circuits from the main box to the device, I determined that the problem is not due to the electrical connection. GE appliance division has been in a poor state for a long time now. The company manufactures this product outside of the U.S., in this case Malaysia, and obviously has a poor quality assurance - quality control plan in place. Couple the production issues with poor customer service and you have a huge, well respected company that is putting out shoddy work.I will be trying to get someone to take responsibility for this problem within General Electric but recognize that any success in that respect is a long shot. My message to other consumers is succinct and to the point - DO NOT purchase this product with your hard earned dollars. Go with another brand with a company that stands behind its products and wants to keep the customer coming back for more. GENERAL ELECTRIC is not one of those companies.

Purchased a GE over-the-range microwave worth about $400. About 2/1/2 yrs in it stopped working. Had a GE repairman come out to fix it. They charge $95 just to come out. I complained so they gave me 50% off parts and labor after the initial investment. It took him about ten minutes to pull out the defective part, a $10 thermostat which he replaced. Total cost: $162. Ive had GE products for years but the new ones are much more cheaply made IMHO. Made in Malaysia. In addition, the handle is breaking off as are plastic parts coming of the top of it. I guess Ill consider getting extended warranties from now on because these products are cheap. If Id had it longer, Id have bought a new one instead of fixing it.

GE is the only manufacturer who still makes an under cabinet size microwave and therefore I use this product. I renovated my kitchen 14 years ago and on my second microwave. It is small, but does do its job, but when I work with a larger microwave I realize how different it is due to its size and less powerful.

GE Profile Microwave/Convection Oven JVM1790WK, over the range unit, CAUGHT ON FIRE while microwaving water for coffee. One of the four prongs that holds the oven grid in place started flaming wildly and smoking after about one minute of microwaving. My whole kitchen has an acrid awful burning smell. This is my second unit for a small kitchen, and I will be lost without this. The first one I had the handle fell off. This one is too dangerous to use. These units cost $600!!! I cannot afford to replace one every few years. Maybe this model and brand is bad news?

After about 5 months of owning the unit (GE dishwasher model GDT580SGFBB), the door latch sensor became defective and discontinued the wash cycle up to 6 times every use. I contacted the GE warranty department. Their consumer relations advocates treated me as subhuman. I never felt like a valued customer, my concerns and my time were never a priority. Instead I became a part of their research and development program while beta testing a defective product.After 6 months of futile repairs requiring multiple technician visits I was exasperated. I had submitted 4 separate warranty claims that often were mysteriously closed without my knowledge. I finally contacted the original retailer, Home Depot, and shared my experience. They catered to me even though it was well past the 90-day store policy. They gave me a credit for the purchase price so I could choose a replacement. Since I dont want to touch another GE appliance with a 10-ft pole, I chose another brand. Shortly thereafter I received a call from GEs Escalated Issues department offering to replace the unit. Evidently that lit a fire under them. But it was too late, my patience with GE has been exhausted. If this is the way GE wants to run their business, then it will be a fast-track way to dig their own grave.

My GE dishwasher is 34 years old and it still cleans every dish, pot, pan and silver spotlessly. It has never needed a repair and the racks are in near perfect condition.

My less than a year old GE microwave stopped working last week. My AT&T phone service died so I had to make repair arrangements online. Guy was here this morning. My microwave’s main board is fried. It does not conform to Repair Guy’s published schematics. Repair Tech could not upload new data to it. Repair guy did order three new parts including a main board. GE told Repair Guy that mainboard delivery ETA UNKNOWN. After three hours here repair tech left and told me to call GE customer care. Believe it or not, two hours on telephone with GE. First you need to talk to a customer service rep that cannot help you. They then determine you need a Customer Advocate. Then they need to input data on your file for the Customer Advocate.Then they need to transfer you to that department. Then you have to get a case number assigned. Then you give someone all the serial numbers and model numbers again. Then the Customer Advocate (CA) takes the call. The CA does not speak English as you and I speak English. After the CA puts me on hold to verify the purchase, then the appointment, then the tech and then the order they actually speak to me. In my case, the mainboard part is not available on CA’s computer. The CA has to electronically contact the parts department to find out if the part is in this universe. If the part can be delivered to my Repair Guy in Jackson, GA within 14 BUSINESS days from the date of the inquiry I have to take the part and wait for repair.In the event the part cannot be delivered in 14 days CA will start a process to get me a new microwave. The parts department has up to 48 hours to respond to the CA. When asked what happens if no response occurs in 48 hours, I was told, That never happens. It is the Christmas Holiday and I anticipated guests. My husband is disabled and his meals are pre-made frozen so I will have to decompose them and heat them on the cooktop. GE could care less about those issues. So after waiting five days for repair I have no working microwave. Someone told me not to replace my GE with a GE, but I did not listen. It is December, holidays, no microwave is an aggravation that I thought paying for a GE product would alleviate. So, on January 2nd I might get an answer. Part possible or new appliance COULD be ordered and delivered by someone sometime.

I purchased a GE Cafe Over-the-Range Microwave along with a GE Range. It was delivered on Nov 2009. The control panel started acting up and quit working altogether in May 2011. I called GE and found that the replacement part and repair was almost as much as I paid for the microwave. After talking to several people and making my case, I was told they would give me a discount on replacing my unit. I was to look at microwaves and let them know which one I wanted. I have left several messages and no one at GE will return a call.

We purchased a new home November 2013, which came with all GE appliances. The problem is the dishwasher racks. The plastic has fallen off the metal, and the metal has rusted away leaving nothing to hold the dishes in place. I contacted GE and they said it is out of warranty. A new rack is over $100.00 and now I see the top rack is rusting also. I have never, in my seventy-eight years such junk. I am surprised GE would put their name on it...

I purchased a GE Profile stocks in 2007 and a GE microwave model JVM7195SK1SS purchased 12/30/16. We have replaced the knobs on the stove 2 times because of peeling in the past. Now we need to replace the microwave handle. The handles and knobs look like metal but they are cheaply made white plastic covered with a sharp silver coating that peels. It appears the knobs get overheated when the oven opens and the microwave handle from the steam when cooking on the stove. Last night I cut my hand on the handle! We reordered the faulty handle and now getting charge $100 from GE. The company should take responsibility for their poor design and replace it for free with a nonpeeling part. I know that we will get the same handle and won’t be able to use the burner below or hope that using the fan will keep it from cracking again. I would never recommend a GE product again.

I have a GE microwave manufactured Nov. 2013, model #JES1456DS1WW, Serial # VA201954 L. I purchased it at Home Depot. I have had it about 2 years. Suddenly it started flashing PF. I unplugged and plugged, and reset the clock several times, but it continued to do this, about 2 days, then just stopped working at all. The GE website listed on the product proclaimed GE Cares; I couldnt seem to find anyone who did despite numerous calls. The only question I had was if happened to be any troubleshooting re my problem--I dont think they cared...

Have had dishwasher for 3 years and it quit working. Had appliance repair people out 3 times and they replaced every circuit board and harness in dishwasher as per GE and still doesnt work. GE own techncians dont even know how to fix it. So I am replacing it! No more GE appliances for me!

The GE dishwasher was in place in the home that we bought in 2017. I like the stainless steel outer color, the noise level is minimal, which I like. The options for different cleaning levels are great. It does a good job at cleaning our dishes. My only negative comment is that it was new when the house was built in 2017. For the past three months it has been stopping repeatedly, multiple times, mid-cycle so that you have to repulse the start button multiple times to finish the cycle. It is barely three years old and seems to already be giving out which means we will have to replace it, probably soon.

We bought this microwave (GE DE68-00307A) brand new 2 years ago and the paint is peeling off everywhere!!!! I keep my microwaves extremely clean, and this was not due to wear and tear by any means. I would say it started after about a year and a half of having it. I have showed multiple people and I cannot believe this is not on a recall list. This is extremely dangerous and could cause many issues. I am hoping someone can do something about this manufacturer and this product. This alone will make me never buy a GE product again.

I bought GE Profile dishwasher (PDT750SSFSS) from Home Depot on Sept 2014. First week it had some drying issue and GE service technician told no issue with dishwasher. After 4 months, electronic control board stopped working and GE service technician replaced the board. It worked for about a month and again same control electronic board failed and need to be replaced by GE technician. Again within a week again board failed for 3rd time. This time I asked for a replacement from GE since same board failed 3 times but GE refused to replace and told they can only repair and cannot give a replacement of dishwasher. Again for 4th time same control board failed now and I have contacted Home Depot for help. I dont know what to do this time and I dont want to repair this dishwasher anymore. It is only June 2015 and it had been repaired for more than 4 times. Ill try through Home Depot to get a replacement, if not Im planning to go through consumer court and file case against GE Profile. I would appreciate if somebody can help in resolving this issue and you can contact me through my email.

I like microwaves to a point. If my wife puts my dinner the refrigerator and I take it out and put it into the microwave if the dinner has let’s say pork chops, mashed potatoes, peas everything gets cooked except the mashed potatoes. They’re always cold and sometimes the peas will pop. There’s never a good medium for all foods at once and if you have any bread or biscuits you have to take it out after 15 seconds. The same goes with turkey cranberry stuffing and other things that go on the plate at Thanksgiving. Some stuff gets very hot. Some stuff stays cold.

Just purchased a home with GE Appliances. Dishwasher suddenly wont start and showing 1H code. Nothing in the user manual that explains what this means. Called customer support. After they requested unnecessary personal information (like email address, physical address, etc.), I was finally able to ask what this code meant. She went straight to, We are unable to provide that information over the phone. We have to send one of our service technicians out to your home. She refused to tell me what the code meant, and instantly wanted to charge me for tech visit. I hung up. Then I googled it, and found out right away that it meant the start was paused/delayed for 1 hour. I had hit the delay button by mistake. This was not specified in the manual under Delay Start, nor was customer support trained or willing to provide the answer to such a simple question. GE Support is just a Scam.

I purchased a newly built home which had all GE appliances in the kitchen. After 2 years and 5 months, the microwave no longer heats the food. I had a 3rd party appliance repairman come to do a diagnostic evaluation. He informed me that the magnetron has gone bad. To have this repaired would be the same price as purchasing a new microwave. He also informed me that the magnetron should never go bad in such a short amount of time. I contact GE and my warranty was for 2 year so the best they can offer is a $75 good will certificate. What this means is I have to purchase a new microwave and send in proof of purchase and in 4-8 week, GE will send me a $75 rebate check.I am disappointed in the GE product. Their products are now made in Asia (my microwave says made in Malaysia) for cheap labor and the quality has gone down. What is worse is that they do not stand by their product. The fact that something as serious as the magnetron went out in less than 3 years is a red flag that it was not assembled correctly. The microwave is listed at over $500. I would have been happy with GE even paying half but $75 will not even cover the cost for shipping and installation. I am very disappointed.

After one repair to my 9 year old microwave we decided to replace it. I am so sorry I did! The old microwave had a stainless steel kit and was made with quality. The replacement is a piece of junk! The outer kit is plastic and shows fingerprints like crazy as well as the microwave itself! Im always wiping it off. The flimsy door button is impossible to open without pushing it ten times in the right spot! The door doesnt close easily either! The front of the microwave is warped and wavy! I hate it! The quality of your microwaves has dropped to zero!

GE model #pem31sm3ss microwave has paint peeling on the interior. GE says it is not safe to use, yet will not replace it. Purchased 08.2010. There are other consumers online with the same problem. There should be a health safety recall on these units. GE offers a $50.00 rebate on a new unit, a far cry from replacement cost.

My dishwasher came with the home when we purchased it, and we did not see any good reason to replace it. It is a standard model, with a nice stainless steel interior. We have had no problems with it and plan to use it until it fails. I would like to have the upgrade model in a new home. This one does a good job washing the dishes.

This dryer replaced an eight year old Frigidaire Gallery Series. The new GE dryer is drying clothes much quicker. I have read some reviews complaining of the buzzer, but it is a nice feature to know when the cycle is about to complete. The nice thing about this dryer is that it has the right amount of dial drying features needed without a bunch of electronics that can typically cost a big service call if gone bad. Also the bottom rear of the dryer allowed enough room for the exhaust to go either left or right behind the dryer with it still sitting close to the back wall. I was lucky to find this as an open box item returned to the store because it was not a gas dryer for the first buyer. Photo shows exhaust located to outside wall.

Nothing happened...never has. It just wont wash dishes. I have to prewash every item that is put into this piece of garbage. I bought it new and have used it for 3 years. It remained in the box the first 5 years I owned it and it honestly did me as much good in the box as it has since we installed it. It makes a good rinser but wont even wash off a lemon seed left in the bottom of a glass. This is such a joke. I would never buy another GE product. The refrigerator I bought at the same time, a side-by-side, the entire front door froze solid within 2 years and we had to buy a new one. Your company stinks. This is a rip off of my money. Refrigerators and dishwashers are not cheap. Model GSDL122F02BB is the dishwasher.

Our Spacemaker microwave, which was installed over the stove August 2008, suddenly stopped heating food. My husband called GE, and their phone advisor advised us the microwave was under warranty. She said her computer screen showed our product registration, and she also saw we owned three other GE products. Fast forward, the GE repairman came and said the microwave repair cost would be around $400. The heating part wasnt under warranty nor was the labor. Mind you, the entire microwave (new) was under $400. We called the GE service center, and they refused to honor what their representative had told us. The most they offered was 50% off. I dont accept the premise that a new appliance should only last four years. I will replace my unusable microwave with a competitor’s brand and will pledge never to purchase a GE appliance again. I will also sell my GE stock, for I now understand why its going nowhere.

The new home that we purchased had the above named dishwasher (GDT655SSJSS). When I run the dishwasher there is a very high frequency whine throughout the cycle - the only time it stops is when it is changing cycles. I have contacted GE Customer service 3 times... The first time I was told to add a quart of water to the bottom of the dishwasher and that should fix the problem. Tried that - still high frequency whine. Second contact - no response. Third contact - today- called customer service after my negative appliance review was rejected by GE (buyer beware of all those positive reviews) and was told that this noise is normal. Totally Unacceptable - since the sound hurts my ears and causes a headache - I have to listen to 111 minutes of this noise (except when the washer pauses to change cycles). This is the very worst dishwasher I have ever owned and even though it is only 2 months old I will be replacing it - and it wont be a GE Dishwasher.

We have a GE Profile Microwave/Oven combo unit. The paint is flaking off inside the microwave. Most of the ceiling paint is gone, and the floor of the microwave is flaking. Because we have a combo microwave and oven, the entire unit must be replaced. Thats around $2400. We cannot match the color, because they dont make bisque appliances any more. GE customer service suggests we replace the microwave with a countertop model, leaving the dead microwave on the wall. This is unacceptable.

Paint is peeling on the top part of the oven. It could fall into food. This seems to be a common problem. Called GE. They said it could not be repaired and to stop using it. Buy a new one. What kind of product do they put out that cannot be repaired? Not very good in my estimation. Customer Service did not offer much assistance to replace it. Be warned. Don’t buy GE products.

Purchased the Maytag MDB7749SBM stainless steel dishwasher in December 2013. The dishwasher and install totaled $700, which for that price and with Maytags past reputation, I wrongly assumed that the dishwasher would last a long time. In May 2016, slightly over 2 years, the dishwasher started having issues with the control panel. The control lock would randomly activate. I would have to reset the circuit breaker daily, leaving it off for around 10 minutes. Even with trying to go through all the steps to resolve the issue, resetting it from the circuit breaker, sequence on the control panel, the dishwasher wouldnt work. I called Maytag and after 40 minutes on hold, they finally answered. They wanted $89 for a service call and for the $143 part, plus labor. Might as well just replace it with another brand like GE, or Samsung.