We have a GE PROFILE dishwasher that has served us well for several years. Tonight, however, while it was doing the dishes the main circuit board caught fire. After turning the power off and trying to blow out the flame, we opened the door cover to find the main circuit board still smoldering. One of the relays on the circuit board had caught fire and started to burn through the circuit board melting it, the plastic cover and the wire harnesses. We were lucky to be home and awake when this happened and were able to take care of it. If we had been gone or asleep we probably would have lost our home!

Almost immediately after purchasing the GE microwave we started having problems with the circuit board. It is now totally on the blink after only 4 years. This was a high price appliance. Sometimes when setting the timer on 30 seconds, the microwave would still be running and after looking at the timer it would still have 4 or more minutes left to cook. This is a FIRE HAZARD! We have lost food from timer malfunctions. This is a product I would be afraid to purchase. I am wondering why cant there be recalls on these cheaply built defective microwaves since you read of the same malfunctions over and over. GOODBYE GE!

Have a three-year-old townhouse in New England that came with GE appliances. Within months the microwave needed a new circuit board and, later, the auto open vent is making funny noises when it opens and closes. WORSE: Dishwasher on fritz in third year, requiring a new computer control pad. The cost: $283. American-labeled products produced in other parts of the world are going to cost twice or three times as much before their useful life is over. Shop with care, friends.

Since 2010, our 2006 GE 1.1 cu. ft. countertop microwave oven model # JES1136WL has had power failure problems. It began in our previous home and now in our next home. All of a sudden, Id check the panel and it would say PF, which means power failure. So, Id reset the clock and there it is, ready for the next usage. Over a year later, in our new home, as of yesterday, it will start and immediately cut off. Now, weve been using this microwave in the same plug since May and now its October. So, what happened? Today, Im looking for the users manual and have located it online. But it appears that the PDF GE has for it, the Adobe document, has a problem. So, Im going to check it on my laptop, as this is my PC. Thank God we only paid under $100 for it. On some of these consumer complaint stories, the person paid a great deal for theirs.

This dishwasher was in the home we bought and its just not a good one at all. We dont like the settings.. We dont like the size. Weve seen better settings on other dishwashers when shopping around and pricing for a better one.

My microwave is only 5 years old. It is burned out electronically. I would never buy another GE product. My GE Profile stove needs a $300 repair after 4 years.

I cant remember the exact date of purchase for my GE Spacemaker microwave oven. I have a receipt somewhere, but I have receipts for repair dated 2002. It is for a door seal gasket for the microwave. A model JVM60 GE Spacemaker installed over the range.The microwave worked perfectly for several years. Then one day, when I pressed the start button, I noticed a small fire inside the window above the control panel where the time is displayed. I called repair man; I was told that it was the circuit board, and GE was not able to send repair spare part. Since then the microwave is only good for displaying the time, and storing my everyday pan. I do remember paying $400.00 for this microwave because I purchased it at my employment. It would seem to me a company making a $400.00 appliance would be backed by a circuit board, which they know would go bad in a short time. Thats why they only had a one year warranty guarantee.To show you the difference in a microwave appliance, I purchased a small counter top microwave in 1997; it still works like a charm, and I use it every day. From the negative reviews I read on these Spacemaker microwaves, I firmly believe there should be some compensation to us consumers for the money spent, plus the hazards we experienced. If that is not agreed, then all of us consumers should file a class action suit against GE.

Sometime in the 1970s, my mother bought all new GE appliances; a refrigerator, a kitchen range-microwave combo and a dishwasher. After her death my husband and I moved into her house and continued to use these appliances until 2007. The refrigerator and dishwasher are still going strong as of now... October 2014. The refrigerator only needed the drainage line cleaned. The range began to have some electrical shortage problems and rather than try to repair (which is what we should have done with both appliances), we decided to replace the refrigerator and range/microwave. We bought new GE appliances; a GE refrigerator (my brother put the old one in his shop), GE microwave and GE range. The new refrigerators icemaker would not work property when we got it and the microwave (Model #JVM2070SK02) quit early this year (big difference in the old microwave at 30 some years use and my new one at only 7 years use). Because my husband was diagnosed with a brain tumor and I was the only caretaker, I was not able to address the malfunctioning icemaker immediately. In fact, because of my husbands hospitalization, I wasnt even at home during that year enough to use the icemaker. WOW! What a ripoff GE is selling to consumers. My complaints wont solve my problems nor the problems experienced by other people who bought these defective appliances but it helps to vent my anger. Just recently a small leak in the waste-water drain hose (easy to replace) sent me scurrying to find a new dishwasher but when considering the replacement of my 1970s dishwasher and the reliability of my newer appliances, I decided that my 1970s dishwasher will outlast anything I could replace it with. So I decided to replace the waste-water drain hose myself.What a sad appliance market we have in the US when buyers have to replace newly purchased appliances anywhere from a few days to a few short years after purchase. I think appliance companies intentionally produce inferior, unfixable products so consumers will replace their inferior ones with new inferior models thus keeping up sales. Do we have a choice? I lived before dishwashers and microwaves and I can live without either now. I would prefer not to go back to wood cook-stove and an icebox but I may not have a choice (I actually have an icebox if needed). Is there any way to hold companies responsible for the products they produce? If anyone out there has had longevity of 10 years or more use from a newer appliance line, that is appliances made since 2000... Please share the producers name with rest of us. GE isnt what it used to be and neither are many other US brand name appliances.

GE Microwave Model WES1450DN1BB 1.4 Cubic Ft 1100 Watt - This product is absolute garbage! This product was manufactured in June 2010 and I purchased it in approximately in May of 2011. So after 13 months of moderate use, the unit no longer functions properly. Needless to say, the product is out of warranty by about a month, so I pretty much now have nothing more than an overweight paperweight.I wont bore you with all the details, but for the most part, the touch pad stopped working and if left plugged in, the microwave will start on its own and run for up to a minute before beeping incessantly. If I unplug the unit and plug it back in, Ill receive a different error message, and so on. I wont waste my time contacting GE, because from what I hear, they really dont give a damn!When I was young, you could by an American-made product and expect it to last for many years. However, ever since greedy corporate America decided to ship all our jobs overseas in the name of profits, I have yet to find any imported products that are worth a damn. Instead of one good American product that would last a lifetime, I now have to purchase the same imported piece of ** many times over to get the same longevity. Maybe this is what GE wants?Needless to say, GE has now been placed on my Do Not Buy list. I guess I will now buy from another major manufacturer to see if their foreign-made garbage is any better!

We have a GE Profile Microwave/Oven combo unit. The paint is flaking off inside the microwave. Most of the ceiling paint is gone, and the floor of the microwave is flaking. Because we have a combo microwave and oven, the entire unit must be replaced. Thats around $2400. We cannot match the color, because they dont make bisque appliances any more. GE customer service suggests we replace the microwave with a countertop model, leaving the dead microwave on the wall. This is unacceptable.

My less than a year old GE microwave stopped working last week. My AT&T phone service died so I had to make repair arrangements online. Guy was here this morning. My microwave’s main board is fried. It does not conform to Repair Guy’s published schematics. Repair Tech could not upload new data to it. Repair guy did order three new parts including a main board. GE told Repair Guy that mainboard delivery ETA UNKNOWN. After three hours here repair tech left and told me to call GE customer care. Believe it or not, two hours on telephone with GE. First you need to talk to a customer service rep that cannot help you. They then determine you need a Customer Advocate. Then they need to input data on your file for the Customer Advocate.Then they need to transfer you to that department. Then you have to get a case number assigned. Then you give someone all the serial numbers and model numbers again. Then the Customer Advocate (CA) takes the call. The CA does not speak English as you and I speak English. After the CA puts me on hold to verify the purchase, then the appointment, then the tech and then the order they actually speak to me. In my case, the mainboard part is not available on CA’s computer. The CA has to electronically contact the parts department to find out if the part is in this universe. If the part can be delivered to my Repair Guy in Jackson, GA within 14 BUSINESS days from the date of the inquiry I have to take the part and wait for repair.In the event the part cannot be delivered in 14 days CA will start a process to get me a new microwave. The parts department has up to 48 hours to respond to the CA. When asked what happens if no response occurs in 48 hours, I was told, That never happens. It is the Christmas Holiday and I anticipated guests. My husband is disabled and his meals are pre-made frozen so I will have to decompose them and heat them on the cooktop. GE could care less about those issues. So after waiting five days for repair I have no working microwave. Someone told me not to replace my GE with a GE, but I did not listen. It is December, holidays, no microwave is an aggravation that I thought paying for a GE product would alleviate. So, on January 2nd I might get an answer. Part possible or new appliance COULD be ordered and delivered by someone sometime.

We bought the countertop stainless steel microwave model JES1142SJ the end of 2010. Noticed a rust ring under the revolving paint about a month ago. The paint was chipped off and when I washed it with a dish cloth, more came off. It is getting worse. We didnt stop using it since it seems it is only coming off under the plate but is it safe to continue using? Could it catch fire? Is it putting bad things in the food we heat in it? Even though it is not an expensive microwave ($100-$125) it should not be rusting inside. It should last longer than 3 years!Sounds like GE will not back up their products since so many microwaves owners are complaining about the paint being inferior and flaking off. There should be a recall for this problem on all microwaves sold by GE. Complaints have been from countertop to the most expensive dual stoves! This is not acceptable and GE needs to step up and deal with the problem with their microwaves that they sell. I usually buy GE; but this is making me have 2nd thoughts and think that my ones I bought in 2010 will be the last purchased from GE.They did come out twice for my range when the oven stopped working at 2 years and one of the eye knobs to turn on and off needed to be replaced when it would not turn off. But a 2 year old stove should not have needed any repairs. I noticed a big difference in quality after I bought this new one when we moved. My old GE from 1996 is still my favorite one and is still working just fine in my sons house.

The little trap door which releases soap stopped opening when the GE top-of-the-line Profile dishwasher was one week past its warranty. Because of the design, all kinds of crud collects under the hinged door, meaning there is ALWAYS an odor unless we get down, hands and knees, to scrub it out. Features are fine -- as long as they work. Having a dishwasher that doesnt even dispense soap and cleanser isnt worth much, limiting us to the automatic feed with shine liquid. Stainless steel outside is impossible to keep clean. There are streaks and blotches within minutes of polishing with Sheela Shine. Suspect it has something to do with the humidity where we live, but it shouldnt happen. I find it strange that GE is perpetually sending me warranty extension offers for my refrigerator (which never fails), but nary an offer for the dishwasher or microwave/convection oven in the Profile line which have each needed repairs twice in the three years since purchase.

We have had this GE dishwasher model GLD6760N00SS for about 9 years and it was fine, until a few nights ago!! We ran the dishwasher, unloaded it, closed the door and went out. When we returned about four hours later we were met in our apartment lobby by the building manager who informed us that we had a fire in our apartment. It started in the dishwasher, which was off, and destroyed the unit. Repairs will be costly due to fire restoration required as well as the need to now replace more than just a dishwasher. Soot covered the whole apartment, and left a need to get a new kitchen floor and repair/replace some cabinets. Be careful of this model from GE.

We upgraded our appliance package when we bought our village builder home 8 years ago. All GE Monogram appliances have rusted and now need replaced. New liners needed in oven which was so rusted we couldnt get the screws out to replace the originals. Was told by GE customer service rust to be expected when cooking. It creates steam and food particles can cause scratching!!! Maybe it should be steam proof especially a microwave. Even the door on this is rusted! Why the shelf ends in a freezer are rusted not sure on that one! Will NEVER buy this brand again and shame on them my upgraded appliances dont even make it to 10 yrs. A disgrace. My mother just replaced her 20 yr old oven. What is wrong that nowadays things dont last 5 minutes? Shame on you GE not recognizing a definite flaw in your products.

This is the second digital microwave I have owned. Both of them have been GE brand. There is nothing fancy about them but they are very Easy to use and get the job done. The first unit lasted about 15 years before it had to be replaced. It was used almost on a daily basis, so I feel I got my money’s worth from the unit!

Needed to replace handle. Silver covering started to peel and actually got a splinter. Cheap plastic underneath covering. Called GE and while they did send out a replacement, I had to pay to have it installed. Instructions on internet were not helpful! Bill to replace was $142. Ouch. GE rep said they did not have prior complaints. I later Googled it and saw 1000 complaints!!!

Ive had this stainless steel GE Dishwasher model GDF645SMONES with the controls in the front for nearly a year. The dishwasher constantly comes on with the slightest accidental touch. However the buttons that control the cycle settings are extremely difficult to operate to cancel the lock or delay hours features. I have to literally bang on the buttons to get a response. My thumbs are now sore from the constant pushing to cancel that lock and delay features that came on accidentally. Once locked, good luck in canceling anything. Im so disgusted with this $600 dishwasher. Complaints to GE and the so-called warranty company that turned out to be one and the same, have fallen on deaf ears from the day I got it. Do yourself a huge favor, do NOT buy this dishwasher. Customer service is awful.

My Microwave that is four years old suddenly wont heat anymore. It still runs but there is no heat. They told me its out of warrantee already. The repairman says its the magnetron and it costs $600 to replace! The oven microwave combo unit is $1500 altogether to replace. I bought another Walmart microwave for $47 and it works great! GE will not replace or fix it. They dont stand behind their products and are not helpful on the phone. I will never use a GE product again.

We have GE Profile Quietpower 6 Dishwasher. We are the second owners of the home and did not buy it ourselves. But the dishwasher is no more than 3 years old. Our dishwasher also refused to turn off after it was done washing dishes, usually humming for hours afterward. One day, we came home and found that the whole house smelt of burnt plastic. Our dishwasher was burning hot and full of burnt plastic. It was off, so we unplugged it to make sure it would cool down. We dont expect any help from GE, but we will never buy GE ourselves. And we will make sure to tell our friends to never buy GE.

I have no idea how long it has been in this house but I bought the home 11 years ago and it’s still going strong. I do have to clean it on occasion. And I use jet dry with every use. And occasionally do buy a dishwasher cleaner.

Microwave (GE 2.2 PROFILE) was manufactured in Oct 2015, I ordered in November 2015 and it was delivered January 2016. Installed in March 2016. Was making rattling sound like the case was loose or something. The other night I placed cup of water in microwave, turned on for 1minute and FLAMES shot out (on the inside) from the “squares” on the inside. Does it every time so unplugged. Contacted GE. Was told Out of warranty. Repair person can’t come for 2 weeks. Waiting for return call from customer support. I don’t think flames can be fixed!!

I've always enjoyed GE products for a number of reasons. They are dependable and with care will last many, many years. My refrigerator lasted just over 20 years! My microwave is easy to clean and has never let me down over the years I've had it. GE products just last longer than other brands.

We purchased a GE Cafe Dishwasher in Oct. 2013, and in Nov 2014 we had a major leak that ruined our hardwood floor. We called GE and they authorized a repair even though our Dishwasher was 1 month beyond the 1 year warranty. Unfortunately is now the end of January 2015 and the dishwasher is still not fixed after 4 attempts by their recommended factory authorized repair company. I have called and written numerous documenting the failed attempt and inability of the repair company to fix our dishwasher, and asked for a replacement, and was denied. They have already spent about $900 to pay the repair company, which I would think would have been cheaper to have replaced the dishwasher and had a satisfied customer. So I have now been without an operational dishwasher for 2 months while it sits in the middle of my kitchen floor, as I wait for the cupping in my hardwood floor to lay down so I can get my floor repaired. Needless to say, I am very displeased with the quality of the GE Cafe dishwasher.

I purchased a slate dishwasher in Oct, 2014. After the third cycle the soap would not dispense (door would not open) or the soap dribbled out and remained running down the door. I had to run the cycle twice to get the dishes clean and for the soap to dissolve. I called the store at which it was purchased. A tech came out and replaced a part. Did not work. After the second time, when the tech said nothing was wrong, even though he saw the soap running down the front door, I called GE. They sent a tech from a different store. After the eighth repair I told them I wanted it replaced. They had already replaced the soap dispenser twice, the control board and even told me to move the baskets (ridiculous). They also suggested I run hot water before the cycle! They said if it was repairable they could not replace it.We went back and forth with this and they finally agreed to replace it. Got the new slate dishwasher in July, 2015. After two cycles I started having the exact same issues! I will not deal with GE or ever buy another of their appliances. I will tell everyone I know not to deal with this company. Quality is terrible and service was extremely frustrating, having to take off work numerous times and wait hours for the service person. In the end, it never worked!

I purchased a new GE over the oven microwave to replace a 10-year old Spacemaker unit. After three weeks of use with no issues, the unit overheated excessively during a normal use. The heat was so intense that the pegs that hold the racks melted causing a severe burn on my sons thumb. I unplugged the unit fearing further injuries and/or fire. Are GE products manufactured poorly or did I get a lemon? Who knows? Anyone else have a similar issue? I am still waiting for GE to respond.

I purchased my GE profile microwave in 2010 when my kitchen was being redone. I picked it for its style and the GE reputation. So far after 9 years, I hope this wont jinx me, it has been a wise choice. I use it daily.

Purchased an entire line of GE appliances for kitchen after having prior (still working) appliances for 13 years. Have had at least 5 services calls and countless emails and phone calls for non functioning Dishwasher. Here is response from GE Manager: I have reviewed the pictures and no I would re-wash those 4 dishes if they came out of my dishwasher prior to using them with my family. Dried on fruit, starches and dairy are tough for any dishwasher to take off as the sugars in them act like glue. Again for these types of foods we would highly recommend more pre-washing to make sure that they are not left on the dishes after the dishwashing cycle. CAUTION: DO NOT BUY.

I needed a microwave, and researched a lot of brands, some the buttons quit working, others sparked. Found this GE on sale at Lowes about 4 years ago for $29.00 and so far I am very happy with it. I must admit it is a little big, but it works beautifully. It does fit on the counter, so for its size and the price it is a great deal!!!

I am very satisfied with my GE microwave. It has more features than other models. The price was reasonable and just the right size for my family. Its quality is way above the other brands that I have owned.

After having my Cafe Stovetop for about a year and a half, there was a electrical component malfunction. During this, smoke came out of the stovetop and it smelled of electrical burning. I sent a complaint to GE since several components were damaged. Knowing that the warranty was only for 1 year, there would be nothing they could do except sell me the parts.

I love my new GE dishwasher! I love the stainless steel look it has. It is very easy to use. It cleans my dishes really good. It is quiet. I feel like it's doing a wonderful cleaning job. I can't wait to replace my other kitchen appliances to match my new dishwasher. I did a lot of research on this dishwasher before I bought it and it had many good reviews from other buyers. That's a lot of the reason I bought it. I love the inside of it. It has so much room inside. It really rinsed my dishes well. Not a bit of soap stains left on the glasses and silverware. I don't have to rinse my dishes real good before putting them in the dishwasher. It does a good job at getting the stuff food off. I would recommend this dishwasher!

My microwave is a very easy to use. The settings are not complicated and offers a variety of options. It has a shelf and turntable that can be shut off and on. The filters are very easy to access and clean.

I bought a microwave Model JVM316RF3SS on 6/12/16 from Best Buy. Here is the serial number GG242212A. This thing is tripping the circuit breaker, it is intermittent. I had been buying GE for the house because the stuff would last or they would stand behind their products. Looks like times have changed, I called yesterday to the customer service and the only thing I was offered was a song and dance. If you are to consider buying a GE product, think about it again. This microwave is only a year and a half, to have a tech service guy come out and look at it, it is was priced out at $97-108 for a visit and then parts and time will be added in additional to this visit price.They have priced this repair out to be cheaper to just replace it. My washer is making excessive pump motor bearing noise during the high spin cycle, this is two years old. Looks like GE is building crap. My background is a mechanical technician for over thirty years, building products that are to be used in the household should be built to last not become a disposable item like a cigarette lighter. Good job GE for joining the other substandard products being built. Must be outsourcing this to a foreign country like everything else. With the model and serial number GE you can call me if you have ANY questions.

We purchased a new General Electric (GE) Adora microwave model DVM1850SM4SS from Home Depot for approximately $355.00 in 2010. It was manufactured in Malaysia and had been in use for 2 years and 9 months before the magnetron failed. I spoke with a GE Customer Care representative on two occasions, and she said that the best that GE could do was split the cost of parts and labor since the 1 year warranty had expired. We had not purchased the extended warranty believing at the time that a microwave generally lasts for many years, and GE had always made quality products and would stand behind them. I indicated that I wanted to have the problem properly diagnosed by the service rep recommended by GE before proceeding further. The 10-minute service call bill set us back approx. $100.00. It would cost at least another $170 to replace the magnetron if we used the service tech contracted by GE. For $270, I believe we could find a fairly nice new microwave. I looked at alternative options for repair or replacement, since I am rather partial to the looks of the over the range stainless steel Adora. The model we have is no longer manufactured, but GE now offers the 1.9 cu. ft. Adora that Home Depot sells for around $400.00. In my internet research, I noted several postings that indicated that due to the high voltage danger of the magnetron, only trained technicians should attempt repairs. After half a dozen calls, I fortunately learned of a Microwave Service Center close to our residence that could replace the magnetron. After taking it down from above the range, hauling it in for repair and paying the approx. $104.00 bill and hauling it back to our residence to mount on the wall, we have a microwave that should work for a while! Total cost including service call for diagnosis - $204.00. Considering that GE does not wish to stand behind the quality of their products, I would not be likely to purchase a GE product again.

No issues yet. But only had for 6 months so time will tell. Read a lot of negative reviews but none here. Bought in Nov ‘18 from Home Depot. Delivered and installed on time. Replaced 13 yr old GE appliances that were still working.

We have not had any issues with our microwave. It is relatively easy to operate (how difficult can it be, right?). Overall, we are pleased with our microwave. The microwave was already installed when we purchased our home, so I cannot speak to whether or not it is worth the price.

We moved into our new manufactured home in May of 2013. That is the month our above range built-in GE microwave was installed. In October of 2013, one of my sons heated a frozen chicken cordon bleu serving for 3 minutes, 45 seconds, according to packaging directions. He said that some of the inside of his food was cool, so my other son put in his serving for four minutes, zero seconds. All of the packaging was removed and each serving was placed on a separate Corelle plate and covered with Glad microwave-safe plastic wrap. While heating the second serving, the microwave started on fire. Fortunately, my son extinguished the fire before it spread. The food did not combust. The fire seems to have started from the ceiling behind the fan. The entire inside of our microwave is clean except for the soot that billowed out from the center of the ceiling. When the service tech came, he scrubbed the soot off of the ceiling with some paper napkins (which he left inside of the unit) and said that the microwave was a total loss. He also said the fire was caused by misuse, because plastic wrap is not meant to be used in the microwave, therefore even though the fire happened within a year of purchase and installation, our warranty was void. I asked GE to get a second opinion and they agreed to send a third party servicer (A&E) who stood me up three times! I finally got to schedule a GE tech to come at the end of December and they sent the same guy who said the fire was our fault! He told me that he never said plastic wrap is not meant for the microwave, but that we are being dishonest because fires only start when the food is left in the microwave for too long. He accidentally let it slip that he is seeing the same problem with GE microwaves in a lot of new construction for student housing in Tallahassee. (We live 20 minutes south of there.) He attempted to recover GEs reputation afterward by saying that of course it was the students faults, too, for misusing the microwave units. Anyway, GE has graciously offered to sell us a new microwave at slight discount. Haha, no thank you!

From these posts, Ive seen people saying that they couldnt trust GE American-made anymore. Our microwave oven was made in Malaysia, but GEs home office appears to be in Louisville, Kentucky. Our problem: peeling paint on the door and upper part of our 2009 GE #JES1451DN1WW oven. As a cancer survivor of 8 years, my antenna goes up with any defaults such as this. On a common sense scale this should never be happening. I was very sad to see no recalls on these items Ive been reading about and am frankly scared to use this microwave. Shame on you, GE.

Our GE microwave just stopped working after 3 or 4 years. It was manufactured 4 years ago, but I am not exactly sure when we purchased and installed it... It may have sat on the shelf for a year. It is not the touch panel, the lights, timer, clock... They all work. In fact, I can put in a time to cook and push START and the timer will start counting down as if the microwave is cooking, but it is totally silent, no turntable, no noise, no nothing. The new replacement model number is the JVM6175 but I am scared to buy it, as I am so disappointed in GE. All the washers, dryers, microwaves, and refrigerators we have bought over the last 30 years have only lasted 3 to 7 years. The only appliance by GE we have purchased that seems to be still working is the dishwasher. We only used this microwave to heat up coffee or some leftovers. It is not being used to cook big meals or anything like that. GE has just gone downhill, it appears. I think I will just give up on them totally.

My dishwasher is a little over 3 months old. Sure its quiet. But I use the heat dry always, but it doesnt dry the top bottom or side walls and it stinks and a lot of food is sitting on the strainer and stinks. I have owned a GE dishwasher for over 25 Years and have never had one that was not completely dry at end of cycle. I have to hand dry my silverware. My Model Number is GDF510PSD4SS Serial number is FF736760B. I want a full refund and take back this reject. I will buy something else, I assure you it will not be a GE Product. Sign me, thoroughly disgusted with this Ge product.

My microwave is less than a yr old and has been serviced 2 times. It is not working right still and before it broke last time it would not turn off at all, would keep cooking with the door open! I have 4 small children and the 2 older kids use the microwave. I called GE and talked to customer service about replacing it. The lady said no and that they will repair it (again) but not replace it! Well it broke the 1st time before it was 6 mo old! This microwave is a lemon and they should make it right! It is a health hazard! This is a large microwave and was almost $200! Please someone listen to me, I need HELP!

I purchased the dishwasher in August. In September, two months later, it would not drain. GE sent a service tech out under warranty who found food particles stuck in the drain pump, removed them, put the dishwasher back together and went on his way. Since then, we have been basically rinsing the dishes clean before even putting them into the dishwasher as, obviously, this dishwasher cant handle much. I have also been keeping the drain filter screen spotless. Two months later, the drain is clogged again. GE sent a second tech out who said that the first tech should have repaired the dishwasher.The problem is that GE knows that the drain pump screen and the filter screens are inadequate and let food to pass through and block the pump. GE has redesigned the pump and the screens and filters and even added a filter to the design and we will get all these new parts installed for free and the dishwasher will then work as it should. Tech ordered the parts on 12/21. The service call was scheduled for tomorrow, 12/27. I got a call today from GE saying the parts had not been delivered. I know this because they are being shipped to my house and they have not arrived. GE called to reschedule the service call to January 6th, 2020--another week and a half away!!!! Clearly, this dishwasher is not working as it should and GE has a problem on their hands. I am now weighing my options as I sit on hold on GEs Customer Service line as I wait for someone to complain to. But as the dishwasher is still only a few months old, I am tempted to load it up and bring it back to the big box retailer from whom I purchased it and demand a refund. This is ridiculous!!!!

We have enjoyed this dishwasher for over 25 years. Over 25 years ago my husband gave me a portable dishwasher for Christmas. About 15 years ago we turned it into a built in. It doesnt look great, some rust and lost 2 of the prongs but it is still doing a great job.

Slightly more than one year, I purchased a model GLD4404RCC dishwasher about which I have made complaints in the past, concerning poor washing performance and which you chose to ignore beyond attempting to tell me how to use it. Now, this Chinese-made piece of junk has begun to give different problems. Upon completion of the wash cycle, it starts to make a lot of noise and will not shut down. I must do this manually. Guess what? It has waited less than two weeks after the purchase date to do this, meaning it is out of warranty. We have just purchased a new home and will be needing new appliances such as dishwasher, refrigerator, washer and dryer, and a water heater. It will not be GE. I shall never purchase any more of GE products as the whole company stinks.

Our washing machine has been with us for almost ten years and I really love the features which make it look modern and easy to dump in a load when we're running late for something. It has been having problems recently but it still runs okay, with only a few hiccups but for a little over ten years, that's pretty good!

GE Profile Model PDW9980L00SS about 5 years old overheated and melted the bottom water sprayer into the element along with anything plastic in the dishwasher at the time. Grateful my husband was up late that night, otherwise, it would have caught on fire. It was not shutting off, had been on about 3.5 hours when it was discovered.

Good dishwasher for the price. Racks are well designed except utensil basket takes up lot of room. Given forks and knife rack at top, basket is not needed. Dishwasher flies at night.

A known GE microwave defect on this (GE JVM2070SK02 Microwave) models control panel has yet again resulted in our microwave not working and GE giving us the standby, pay for an appliance technician. I would like GE to own up and send a technician to replace the control panel and get it working since it’s a known issue.

I may be speaking too soon because I need to run my dishwasher again to make sure the minor leak truly has been fixed, but I am very impressed with the responsiveness of GE customer support. There was virtually no wait to talk to a rep about my 2-month-old dishwasher with a drip (plus water was collecting inside). Less than twenty four hours after my call, a friendly man was at my door to fully diagnose and then correct the issue. This was the cheapest, bottom-of-the line model that they so quickly came to service! Now in an ideal world, a new dishwasher wouldnt need any servicing at all, but I think all dishwashers are pretty finicky so at the moment, Im pleased.

We had purchased the first listed model of dishwasher (Model PTD7505SSF8SS) and installed it on Aug 27/16. It worked for a total of 13 days and broke down on Sept 9/16. After a good deal of phone tag - a technician looked at it and said no less than 3 internal components had failed, the unit needed to be replaced. We were without the unit from Sept 9/16 until Dec 23/17 when the new replacement unit (Model PTD845SSJOSS) was installed. It worked for a total of 20 days and broke down on Jan 12/17. More phone tag... Tech looked at it and found a number of issues (motherboard, door switch, etc...), in addition - it had been leaking water under the dishwasher for the time it was in service. (All 20 days! What a record!)When a dishwasher leaks upstairs... It doesnt go well for the drywall ceiling downstairs. (The rep at GE was cold and calculated informing me that is what insurance is for!) Im not sure that is what someone who spent $1,699.00 for a GE product (in good faith of a reputable product) expects to be told by the individual who has the ability to make things right? At any rate, this is what you can expect from the trained professionals at GE. When they finally got around to looking at my file... They decided to simply replace the motherboard in the hopes it will fix the leak also.I would have liked a refund at this point (not likely) so I requested yet another replacement (given the issue of water leaking), they absolutely refused. As of this date Feb 2/17 we are still without a dishwasher. Goes without saying - no more GE products will enter our home and I will share, with everyone I can, the caring and kind words of support I experienced from the top level at GE.

Does just about everything my ovens do, but better and certainly much, much faster. Bacon is crisp, chicken tenders - tender, puddings are creamy, and on and on. Try poached egg or an oyster levant, wow.

The GE repairman just left. It wasnt the coil that was flaking, it was the eco dish washing detergent I was using. The detergent wasnt dissolving, it was clogging up the jets and burning on the coil. What I was seeing was black burned detergent flakes. The repairman gave me citric acid to use to clean out the clogs (for free). He also didnt charge me for the visit, even though it was my fault. He also told me to get the water in my sink really hot before I start the dishwasher. I am very impressed with his service!

Microwave is a 2001 and works just fine. There are a couple of things that could be better and that’s the exhaust and the lighting outside of microwave. Possibly could be more energy efficient but are bigger models built that way?

I have a General Electric HVM1540DN1WW over the stove microwave that I have had. This month will be a year and a half. The oven stopped heating so being a DIY person, I pulled the oven out and took it to my workshop to see if it was something I could repair. Inside the front panel was a very helpful schematic of the whole oven. Using the troubleshooting step listed on the paper, I found that the Magnetron tube had gone out. So I went to my owners manual and found that the tube had a four-year warranty on it so I called General Electric consumer relations to have the part replaced. First I had to fight with them because they said it was only covered for a year. After about an hour and a half on the phone and giving her the publication number on the manual, she agreed that it was indeed covered for four years. So she said that she would replace the part and she would even send a technician out to install it at no charge. I was very happy at this point. She said that she would ship the part to me next day with UPS and the tech would be out the following day to replace it. So far so good, till the next day when the part did not arrive. I called back in to General Electric consumer relations and spoke with a man this time and he told me that she had canceled the order that is why I did not receive it, and he couldnt see why. So he looked at the comments she had made the day before and did see that she said she would replace it and send a tech. The tech was supposed to be here the next day and I had no part for him to install. The man said he would place the order and have it shipped to me by the next day no later than 10 a.m. and the tech would be here between 1 to 5 p.m. Great! Until the next day and again no part when they said it would be there. Again with the call only to find out that it was scheduled to arrive next day guaranteed by 7 p.m. The tech is supposed to be there with in the next few hours and I wouldnt have the part. I called Fed-Ex and sweet-talked the lady into getting a hold of her driver to see if she could get to me ASAP. Bingo, next thing you know I have the part, the tech calls and the part is replaced. Oh boy, the big gaping hole above my stove is finally going to be filled once again. (I promise I am coming to the end.) After reinstalling the oven, I found out that it was taking longer to heat than when I got it, and it has a brand new Magnetron in it.Again with the call to General Electric consumer relations to set up another tech to come out and check it out. So the following day, the same tech arrives and puts a cup of just barely cool water in it and puts it in for 30 seconds, pulls the water out and says it is working just like it is supposed to and leaves. Well, again I called General Electric consumer relations to let them know what has transpired, but this time I asked to speak with someone higher up the food chain. I then spoke to a lady and she said that she would set up another tech to come out and check it out, and if it resulted in the same way that she would replace the unit with a new one. The following day, the same tech calls me and said that the oven is working the best that it could so I should call back to consumer relations as he did and set it up for a new one to be sent in its place. So I called once again and was not able to speak with the same lady and the only thing she could do is send me a voucher for $250 laying around for a new oven, but I would have to purchase one and send the voucher in with the receipt to get a refund. I told her that I did not have a spare $250 dollars around to go buy a new oven and then wait for the refund to get to me. So I asked that she have the lady that said she would replace it to call me back to straighten this problem out. Finally the following week, the lady calls me back and said, This is the best that I can do, due to me voiding the warranty. I asked, What? She said that the tech that spoke with me said that because I had hard wired in the unit to the house wiring, it was receiving low voltage so she couldnt do any better than that. I told her that was the most asinine comment I have ever heard coming from a field tech and asked her whether he went to a school backyard Techs-r-Us. I asked if she would have the tech call me to explain. I also gave her some friendly advice that she should not use that comment to anyone else for fear of someone laughing at her. We agreed to have the voucher sent if that was the best she could do. I will not buy another GE appliance again! I have purposely not mentioned anyones name because it was the experience, not the person that I spoke with.

My GE model JEB1095BB04 microwave/convection oven is 6 years old and the magnatron has failed twice. The first time, GE said they would replace the part free of charge, but I had to pay for the service call, which I did and it cost me $212.00. Now, the part has failed again, the second time in 2 years, and GE basically said you lose. A rep from GE told me that they only guarantee their products for 1 year. There is no doubt in my mind that all GE products are garbage and I would strongly discourage anyone from buying them. I will gladly take my GE microwave, smash it into pieces and replace it with a KitchenAid appliance, which is backed by a reputable company.

Purchased new GE dishwasher after previous model lasted over 11 years. Family eats most meals and home and typically runs washer at least 4 times per week. New model was upgrade with stainless steel interior and all the efficiency upgrades from technology advances. Ran great for first 18 months then suddenly we opened one morning and notices water standing in bottom of machine. Emptied dishes, re-ran with same result. Technician called and spent an hour diagnosing to determine water pump, control board and wash motor would all need to be replaced at a cost of nearly $600 or 75% of what we paid for the unit new less than 2 years ago. Simply unacceptable that GE would produce such an unreliable product. We will be replacing with a different brand and would tell anyone to avoid GE dishwashers.

As a landlord I have about 20 GE microwaves. I have had 8 handles break off in the last few years including the one in my house with me pulling the door open. Standing straight in front of it, just pulling regularly. Replacement plastic handles - just two pieces of injection molded plastic - selling from other companies for as little as $10 are $130.00. $130.00! There is a clear design defect here and the companys solution to it is to charge $130 for the plastic replacement part. Someone should go to jail. Literally. Please include me in the class action lawsuit.

Month Long Dish Washer Installation from Hell (Try #3 the best).Install Try 1 (I took off work for): Oops, I ordered the wrong hose. I am going to have to come back next week to install. I will call you and set something up. (installer). Next week Friday: Hello is this GE Installation services Umm its Friday and the guy never called or showed up this week to install my dishwasher I just purchased??!? (me). We then set up a time for the following week. How unprofessional.Install Try 2 (I took off work for): Umm still didnt bring the right hose. Can you go to Home Depot for me and buy the right one and bring it back? (installer). Ahh No!?! This is your problem not mine. (me). Well I will have to come back then. (installer). You have to be kidding me. I have to take another day off work?!? (me). Finally he gets a guy to come with the correct hose. Umm, can I borrow a screw driver and some tools from you?(installer). You have to be kidding me, sure? (me). Installer proceeds to drop the sides and fumble around banging the pieces on my NEW floor. Finally getting it installed. It doesnt look right. Dont the feet raise up and shouldnt the dishwasher be flush to the cabinets????!? and it looks crooked?? (me). Nope. (installer). I file a complaint and the guy removes my $60 install fee and sends another team out to fix it.Install Try 3 (I took off work for): 3 guys come and re-install dishwasher worse than the guy before them. From the other room you hear banging around and Oops, I broke a screw etc... This is what happens afterwards. Umm the plastic backing and sides are showing. Its pushed out farther than it was from the first guy. It definitely is NOT supposed to look like that. Plus its loose??? (me). Best we can do. Bye. (install team). This doesnt seem right....(me). Oh no, its leaking!!!!!!!!!!!! (me). So I called a plumber to come ASAP as I said before its NEW wood floor. New Plumber NOT associated with GE or Home Depot (who I probably will be getting a nice bill for calling last minute) proceeds to fix my dishwasher for the next 4 hours...Here is a small list of problems: 1) its leaking; 2) the foot vibrated off; 3) screws broke off; 4) damage to hose; 5) bottom plate installed at angle not even remotely level; 6) scratched up floor and cabinets; 7) installed too far forward and too low. This is the list. So far we still are trying to figure out where it is leaking from and if the dishwasher even will work. Thank god I actually got a Professional this time unlike GE/Home Depots teams. I then called GE Install services 1-800-432-7167 again and this is what they had to say: We already refunded you the 60 dollars. There is nothing we can do but we will file your complaint. I called again to speak with a manager and after a long conversation, he gave me $62 off my order. -- And let me tell you that is not going to cover the cost of the plumber I just hired to fix your mess. Not to mention the 3 days off work I took. Irritated I hung up. I bought a fridge, cook top, and double oven with GE along with this dishwasher. I wish I hadnt given them my business. Apparently, I am supposed to call back if the dishwasher doesnt work when my plumber is done working on it. Oh I WILL be calling back, you can bet on it. As for now I just hope he finds the leak... Moral of the story is NEVER use the install services they offer. You are better off getting your own plumber from the start.

We purchased all GE Profile appliances when we built our house 4 years ago. The dishwasher, for the second time, has turned itself on and melted everything inside and got smoke in the house before we discovered it. I am afraid to have it repaired for fear that it will happen again when we’re not home or asleep. There seems to be a lot of people having this problem, yet I do not qualify for any recall that I can find. I am disjointed in GE to say the least.

I purchased a GE microwave from PC Richard and Son in 2011. The microwave is mounted above the oven. On March 13, 2013, the microwave (model JVM1750DP1WW) sparked a fire inside while my daughter cooked a waffle. After I contacted GE via email, the case manager (Misty) sent a technician to my home to inspect the microwave. This was free of charge. The technician claimed the microwave was able to be repaired and he needed to order touch up paint and a few parts. I was shocked that the tech claimed this was a simple repair and able to be fixed. I said, You need touch up paint? This is going to look horrible. How safe can this be after having a fire inside? He claimed it will look good and I would not notice the paint. I spent $411.00 on this microwave less than 2 years ago. I dont think I should have it fixed and touched up with paint to cover burn marks. The microwave went on fire. I dont want it fixed. Its not safe and should be scraped for safety regulations, not repaired and touched up inside with paint. The tech ordered a few parts and I immediately called the case manager Misty to stress to her my numerous concerns on the actions of the technician. I made clear that I was not satisfied with my microwave being fixed and painted when it went on fire, but would like a replacement. I told her I could understand fixing it if it was a broken part or electronic device, but not a fire. She agreed that she also would not like to have a fixed microwave in her home, but that GE can sell me one at a lower price of $150.00. Really, do they need the money that bad that they cant stand behind a dissatisfied consumer when their product went on fire? This could have been so much worse. Lucky my daughter was in the next room. She smelled, heard the fire and stopped the microwave. I paid the $150 just so I can have a working, new, safer microwave in my kitchen. But this is crazy and not good business ethic on GEs behalf. This should be set as a recall, not a repair. I contacted the service manager again stressing my complaint and feelings about paying this fee for a new microwave. She said again that if the technician says the microwave can be fixed, then theyll listen to the technician and fix the item. Well this seems a little one sided since the technician works for GE. No brainier. What do you think he is going to say?

We installed a GE Spacemaker Microwave Oven /Range Hood in 2005. We used it mainly for the overhead light over the range, the timer, the vent fan, and only occasionally to microwave vegetables. On 8/5/2011, I put a dish of eggplant in a glass dish to heat up and the microwave shut down completely to the point that I had to check the circuit breaker to see if the switch was shut off. The microwave and everything associated with it is dead.

PDT845SMJES - I purchased the entire GE Profile series when we remodeled our kitchen in October 2016. The first time I started the dishwasher, it leaked out the bottom of the door. The store where I purchased it sent out a plumber who discovered the soap dispenser was missing the seal. Took a week to order and replace the seal. Worked fine for 5 weeks. Then, on December 17, 2016, it quit mid cycle and I got the leak detected error message. Now I am in dishwasher hell. The store where I bought it said they were too busy to come and check it, so they told me to call GEs customer service number. GE sent out a plumber from Iowa (I live in SD). He removed the bottom panel, to look underneath and decided it needed a new pump and also a new soap dispenser part. That was on back order, so I had to wait until January 11, 2017 for him to come back. When he pulled out the dishwasher to replace the pump, he discovered the tub was leaking along the left side. He said the unit could not be fixed and suggested I call the store where I originally purchased it. They agreed the unit could not be fixed and contacted GE and got me a case number and said GE would call me by the end of the week. Im still waiting for that call. Do NOT buy this model GE dishwasher. GE apparently doesnt stand behind its products and the stores that sell GE are helpless to do anything for you.

My microwave also began peeling under the glass within a few years after we purchased it. I contacted GE and they claimed they never heard of that type of complaint before and there was no recall. I knew it could not be just my appliance that was doing this. It is peeling A LOT under the turning dish, but unfortunately I cant afford to buy another oven/micro appliance now. When I can IT WILL NOT BE A GE!!!

My 4-month old dishwasher started to leak so I called GE to repair since it is still under warranty. Technician said there was a superfluous piece on the gasket which he removed. Dishwasher was fine for about 2 cycles when it started to leak again. As GE do not have a weekend service I had to take a second half day off work. Different technician said the gasket was not pushed in correctly and I should check it each time before running it. Shouldnt this be part of the design - a gasket that stays put?! Ran the dishwasher. Water all over the floor. The new floor that is getting ruined by this clearly faulty appliance.

The interior paint on the microwave is peeling causing there to be sparks in the interior of the microwave. The microwave interior paint is defective and should not have peeled. The microwave interior has metal showing which causes sparks.

I called and emailed GE about a microwave that is in my summer home. Its probably been used a total of 15 hours. They suggested a tech. I asked how much and they told me about $95. I said it died, why not replace? They told me they will give a good discount, yada, yada. As I point out, now I have to install it again so whos going to pay for that? They keep stalling and Im still waiting. I also have over $8,000 in GE appliances. I guess I will not buy another. They do not stand behind their products.

Had it over 12 yrs. Never a problem. It’s a wall mount microwave. Easy to clean stainless steel. A bit of a pain to clean the stainless steel inside of microwave. Would recommend the microwave to people looking for one.

Periodically my GE Profile Dishwasher will not clean well. On every occasion it is due to clogging of spray ports on the upper and/or lower spray arms. Removing the blockages is nigh-on impossible as it is often not possible to extract the blockage from the outside and its not at all possible to flush the blockage back down the arm to extract it at the centre. All that is required is a bit of forethought and the creation of some access to the arm. I was frankly surprised to not be able to find a replacement arm as the suggested solution to this problem, the additional part revenue being part of GEs the business model. There are a number of other design issues with the assembly at the bottom that make me think it was done by an intern and nobody checked her work at the end of summer break before it went into production.

GE states they do not repair microwave ovens under warranty. Instead, they offer to reimburse you at MSRP for repurchasing the unit if you will show evidence you have ruined the units operational function. The interior bulb burned out in my unit, I disabled the unit, sent in pictures and receipt. They sent a coupon for about $30.00 less than MSRP and lied about the conditions of reimbursement. Brendia, the agent I spoke with, broke off email contact when I stated the unit was no longer available from the sellers on the GE seller list (including the seller I originally purchased from), and that the unit was only available at MSRP from the online sellers I could find. My microwave is inoperable and GE has not responded or offered to increase reimbursement to MSRP. I have not located a chain of command to whom I can report Brendias dishonest management of my case.

We had to replace our dishwasher a few months ago and we got a GE Dishwasher and we could not be happier. This unit cleans so much better and seems to take a lot less time to do a full load. I would recommend GE to my family and friends.

I like microwaves to a point. If my wife puts my dinner the refrigerator and I take it out and put it into the microwave if the dinner has let’s say pork chops, mashed potatoes, peas everything gets cooked except the mashed potatoes. They’re always cold and sometimes the peas will pop. There’s never a good medium for all foods at once and if you have any bread or biscuits you have to take it out after 15 seconds. The same goes with turkey cranberry stuffing and other things that go on the plate at Thanksgiving. Some stuff gets very hot. Some stuff stays cold.

We wrote to GE regarding the issue with the dishwasher and, after some phone tag, a certified GE engineer came to the house, diagnosed the problem and ordered all the replacement parts. This morning, they came by to install and essentially rebuild the entire system with the exception of the stainless steel. Overall, we are very happy with the outcome. With all the negative issues GE experiences online with regard to the Cafe Series, I give them a solid 8 for responsiveness and taking care of the situation. Perhaps ours is a rarity, but if you approach them logically and with facts, they seem willing to work with the consumer. Heres hoping the system cleans better now too!

I purchased a full suite of GE Monogram Appliances about 5 years ago. All are fine except the microwave which was made in China. The back is rusting out, the inside is chipping at the door and moisture builds up in the door window. This progressive deterioration has taken place over the past 5 years. I paid $420 for the microwave plus $226 for the trim kit. Now, all GE wants to do is sell me a new unit and a new trim kit (will not fit old trim kit). I paid approximately $20,000 for the entire group. I bought GE because I trusted the name. Im stuck with GE if I want to match the remaining appliances. There are only two people living in this house so there is only minimal usage. To further complicate things, there is no serial number on the tag.

I have a GE Profile model JT965SK4SS micro/oven combo. It came new with my new home. A couple years into it, the paint (lining) interior of the microwave start to bubble and peel and eventually started rusting. Had SEARS come out (warranty had expired) who contacted GE and they concluded it was only cosmetic that it doesnt affect the functioning of the microwave. Well, its gotten a LOT WORSE now, bubbled peeling paint all over inside, rust, exposed metal, and the paint is falling onto food. I can NOT even wipe out the interior to clean it, it makes more stuff come off/fall down. I called GE last week, was told by 2 employees that it is NOT safe to use anymore, discontinue use. I had SEARS come again (per GE). The tech said he had NEVER seen anything like it before. He called GE to tell them its not safe, exposed metal, and its dangerous. They again said, well maam, youve gotten 8 years use of it. We wont replace it, but will offer you a discount for a new one ($2,500 out of pocket for me). The person who had offered me the discount (yes, I sent pictures, showed how bad it is) also gave me a tip regarding the unit I have now with the exposed metal and the chance of arcing (spelled? like Ark) if the unit catches on fire, make sure not to open the doors, the fire should contain itself. 2 employees told me its not safe, a 3rd gave me helpful info for if/when it catches on fire... and yet, they still wont replace the unit... and do not stand behind their own products. I plan to go to our local news station, see if they can get anywhere with this, since they wont do anything. Patiently waiting and unable to afford a new unit.

I have many other things to do other than to voice my extreme and total displeasure with your company. GE - Huge Company, Small Customer Service. We purchased a GE microwave oven from ABT electronics in about August, 2013. In October, 2014 we had issues with the fan remaining on while the door was closed. Called GE. They said the unit was out of warranty by about 2 months. We felt that was a short period of time and that we called as soon as the issue became chronic.Had three service calls where the techs tried to fix a simple problem. First tech walked through our living room with dirty boots. Didnt fix the problem. Messed up our carpet. Bad attitude. Second call, two techs couldnt fix the problem. Said it was a door issue and they made some superficial adjustments. Problem not fixed. Third call, two more techs. Same result. In the meantime I tried to convince GE that I didnt want another service call. I wanted a new unit. No luck. I was offered a discount to purchase a new unit for around $300 or so. Im sure they spent more money on service calls than a new unit would have cost in terms of dollars and the reputation of one of the worlds biggest companies.Now, the fan for the unit stays on almost all the time after the cooking is done. Is this the best GE can do? If so, thats pretty sad. Tried to reach someone in sales who would get it. No such luck. DONT BUY GE AND IF YOU HAVE ISSUES DONT RELY ON A FACELESS, CLUELESS CUSTOMER SERVICE DEPARTMENT TO HELP IN ANY MEANINGFUL WAY.

We have a GE SpaceMaker JVM 239BV 001 over the range microwave purchased about 10 years ago. Within one year of installation the handle snapped - just as numerous people here have stated. I went to our local replacement parts store and was shocked that it cost $30 for a new handle. The sales person said if I were you I would by the lifetime warranty for an extra $3 because you will be back, I sell lots of these.

This GE Model JNM1541 is a 1500 watt, under counter microwave with quite a few features. It has plenty of cooking power and has not failed in its nearly 5 years of use. I have never used the included metal shelf.

GE had recalls on models 8500 and 8700 due to the motor catching fire but not my 8600 which is right in between. So besides it being the worst working dishwasher weve owned by not even cleaning well, the unit catches fire and almost burns my house down and GE wants to give me a credit toward buying another fire trap as opposed to replacing it because its 5 years old. I expect appliances to last more than 5 years and not catch on fire. No more GEs for me!

I purchased a GE dishwasher 1.5 years ago and it has been nothing but a problem since day one! The door will not stay latched and the dishwasher is perfectly level. You might get 1 or 2 washes in before you have to work on it again. We bought a set of appliances from GE and the stove and refrigerator have worked well. However this dishwasher is junk and I based on my experience I would not recommend this product to anyone!

The GE microwave model CJES1290Ml01 does not get used much, maybe 15 minutes per week. I have not even used convection oven or broiler part, so we could say very gently used. Sparks and grinding noise out of the magnetron tube area started recently and there is no metal in the microwave. It arcs like there is metal. There are not enough miles on this equipment to need replacement, but it is too expensive to fix. Im not happy with Walmart GE product. Did they cheap it up?

Purchase date 4/20/15; Model # GDT 580 SMF ES; Serial # VD776355; Dishwasher wasnt installed until the end of June upon completion of a complete kitchen renovation. Eight months later, on March 1, 2016, the dishwasher was leaking water all over the kitchen! I initiated a service call and the repair man replaced the seal and it has worked without leaking until April 13, 2016. AGAIN a very large amount of water poured out of the left side of the door. The repair man had to return 3 more times and finally didnt have a leak for almost another year. Now, June 1, 2017 my kitchen is once again flooded. This machine is garbage - Very expensive garbage. Dont waste your money! I had previously purchased from Sears and never had a water leak in a machine that was 20 years old.

We usually turn on the dishwasher in the night. Last month ours started smelling smoke in the morning 6:00 am. When checked, it was the dishwasher that melted couple of plastic cans and its own sprayer and other plastic parts (pictures speaks for itself). When checked with GE, this model was not under recall (there are other models with similar issues). They sent their technician, who confirmed that newer models has auto turnoff circuit. When I asked GE rep, both (level 1 and her manager) assured me that even though it shows its burnt from inside, it would have contained the fire inside, which I disagree. Even after seeing pics, their tech review and the whole incident, their engineers determined this is not a safety hazard to me or my family.

A small black piece of plastic, which snapped into the back of the microwave handle has bent/shrunk, and popped off. My microwave is just a little over one year old. I called the GE 1-800 phone number for parts, and GE does not offer a replacement part for this, without buying a whole new replacement handle, which costs over $160.00.

Purchased a black stainless steel microwave model JVM7195BLTS. When we opened the box we realized the handle finish was stainless steel and not black stainless steel as the rest of the unit. The website picture clearly shows a matching black stainless steel finish on the handle. Store was unaware of any problems and reordered another one. They claimed the GE rep said they had a problem with the handles on these units but didnt tell the retailers.

Our GE microwave stopped working after about 7 months of use. Ive never had a microwave break down on me before. Ive owned other brands which Ive used for years, actually lasted over 10 years. The only reason we purchased the GE microwave was because our old microwave was too big in size. I called GE for warranty service and it was very much of a hassle just to make the appointment. I had to call several times because a customer service representative misinformed me. It took a couple days just to set up a service appointment.Ive told the representative that the microwave stopped working and will not power back on again. The representative told me that the fuse probably went out. Something must have blown out. Finally, the appointment was made for about a week later, which was the earliest time available. It is so inconvenient not to have a working microwave even just for a day. Anyhow, the service tech came about two hours late. The scheduled time was for 8am-12 pm. He showed up close to 2pm. A family member was waiting at home all day because of this. Then the service tech told us that he needs to order a part for the microwave and that he will return a week later to repair the microwave.A week later, he didnt show up. No one even called. So I called back GE and found out that the appointment has been postponed! So now, we have been without a microwave for about three weeks. I think this is ridiculous. Im pretty sure that this is a common problem with GE microwaves and they already had an idea why the microwave wasnt working. It doesnt power-up! Now they are telling me that they dont have the part/s in stock? If I had known that we had to invest so much time and go through so much hassle from the get-go, I would have just purchased a new microwave three weeks ago. GE should pay me for all the time Ive wasted!

I have a GE Profile dishwasher that is only 1 1/2 years old and the control panel has stopped working 2 times. The first time, it’s under warranty and it repair took place for a couple of minutes. The second time, it’s not under warranty and they want to charge $89 just for the service call, parts and labor. Crazy. That’s a $1000-plus appliance that has already broken two times. I cant run the dishwasher on any setting except the one that it decides to choose for us. Yes, it changes whenever it feels like it. This was one of their higher end dishwashers and, to be honest, it really doesnt clean any better than a lower end one that I had at a previous home.

I bought a GE dishwasher model #GDF570SSJSS from Sears. It was delivered on Thursday, installed Friday (by myself and a daughter) and the first test run produced nasty, dirty dishes. It took 2 hours and 10 minutes for it to declare that the cycle was finished and the dishes were clean. Fortunately I did not opt for the drying cycle. Or else the nasty crud would have been baked on. I called GE service and they scheduled a Monday service call. Monday, a very nice man hooked the unit up to his computer and found nothing wrong. He then placed a plexiglass door on the unit so he could watch the cycle. He found that the connection to the upper arm was not attached. He snapped it into place and declared that it was fixed.While I watched through the plexiglass door I was appalled that the reason that the GE dishwashers are so quiet is that the washing spray is extremely gentle. The technician seemed very proud of how quiet the units are. I told him that I could get my dishes cleaner if I spread them on the lawn and used a water hose sprayer. He was not amused. I chatted with him and asked several questions and learned some interesting facts. The lower and upper spray arms and the top rain action do not all happen at once. First the lower arm sprays, the machine pauses, then the upper arm sprays, the machine pauses, then the top rain action happens. This cycles over and over until the machine thinks the dishes are clean. I asked why there wasnt a hurricane inside the unit scrubbing my dishes? He said that the motor is a DC motor, I asked how many volts, he said 12.After he left I filled the machine up with dishes I had saved over the weekend for the test. The machine ran for 2 hours + (I forgot to write down the start time). The end result was nasty, dirty dishes that I washed in the sink afterward. So the new dishwasher looks just like the old dishwasher but let me tell you, she is not happy at having the worthless piece of junk sitting nearby and doing nothing while she is sweating over a sink full of dishes. When Im not quite so angry in a few days I will have a conversation with Sears to try to resolve this.

Bought the new dishwasher in Dec. 2013. In November 2014 a month shy of warranty expire, the detergent dispenser did not release or partially released the detergent. GE sent out A&E Factory service to fix. First visit initiated the parts order which was a new computer board and a Cascade Series detergent dispenser. A month later the second visit to install parts, the A&E tech was at our home for 3 hours and it took that long to remove and replace detergent dispenser. The tech did not replace computer board stating it was not needed? A week later the detergent dispenser still did not release the detergent! Called back to set up another appointment which was at the earliest Jan 19th 2015. Meanwhile last Friday Jan. 9th 2015 the dishwasher started to smoke heavily causing smoke detector to go off at 9 p.m. at night. Thank goodness!! We were home so that I could disconnect the power. Third visit was 1/12/15 and was informed by Lead A&E tech that the board should have been replaced and that the tech that was sent out was a trainee and inexperienced to work on my dishwasher. He should of never worked on my dishwasher(!!) according to the Lead A&E tech. The Lead A&E tech also stated that my model has had a problem with the computer boards which is essentially the brain of the dishwasher. I am currently taking my fight back to GE since A&E Factory is a subcontractor to GE and is not authorized to replace appliances. I told GE that I want a new dishwasher that is not using the problem computer boards even if it is an upgrade. It is not our fault that they have work with A&E who send out inexperienced techs to work on complicated GE appliances. We want a dishwasher that we both feel safe to run while we are not home. Is that too much to ask for?

The new home that we purchased had the above named dishwasher (GDT655SSJSS). When I run the dishwasher there is a very high frequency whine throughout the cycle - the only time it stops is when it is changing cycles. I have contacted GE Customer service 3 times... The first time I was told to add a quart of water to the bottom of the dishwasher and that should fix the problem. Tried that - still high frequency whine. Second contact - no response. Third contact - today- called customer service after my negative appliance review was rejected by GE (buyer beware of all those positive reviews) and was told that this noise is normal. Totally Unacceptable - since the sound hurts my ears and causes a headache - I have to listen to 111 minutes of this noise (except when the washer pauses to change cycles). This is the very worst dishwasher I have ever owned and even though it is only 2 months old I will be replacing it - and it wont be a GE Dishwasher.

Negative 5 stars. I purchased a GE over the range microwave oven, JVM2052SN1SS, just over a year ago and had a service call to address a lack of exhaust about a month after my purchase. In summary, the tech said it would not function as a dedicated exhaust hood and nothing can be done. 14 months later, the key pad began malfunctioning. Also, the moisture sensor that the operation manual stated will automatically start the exhaust fan, never worked and every time we cook, moisture would build up between the glass on the microwave door.I called GE Consumer Relation today and they will not address this issue free of charge. I will not purchase another GE product because GE dont stand behind their products.

We purchased the suite of Cafe appliances. After one year of service, out of warranty of course, the touch pad on the microwave quite working. The touch pad on the dishwasher has several lights that do not work. These products are insanely inferior. If you are considering purchasing, I would buy anything but GE.

If I could give it less than a star, I would. We bought the GE model JEB18600M2WW as a wall insert microwave earlier to replace a 1999 GE of similar version that went out earlier this year. We use it 2-3 times daily, 30 seconds here, 2 minutes there. Today, I went to warm up the babys bottle, and it made a weird sound and went dead. Im sure its the same thing everyone else is complaining about. I wont be buying another GE microwave again.

I have owned my dishwasher for 5 years. Monthly, I use dishwasher magic to clean the inside, removing lime, minerals, rust and grease. The lower rack, under the silverware rack is completely rusted. I have used and owned dishwashers for over 35 years and not once has one rusted like this. Poor quality for the racks! I feel it should be replaced free of charge.

Our builder installed our GE microwave Model: JVM7195SF1SS as part of our kitchen appliances. It worked fine for about 3 1/2 years. Then it stopped heating. It turns on and appears to work, but after inserting a cup of cold water and running it on high 10 minutes, we remove cold water. I looked into this and found that the magnetron (spelling?) tends to fail. Apparently, its a known issue, based on the reviews. GE wont allow consumers to replace this and doesnt provide replacement parts. Getting it professionally repaired will cost more than the microwave is worth. GE sent me a certificate for $150 to replace it, but it will cost at least twice that to purchase a new unit and get it installed. Plus, we have to buy another GE. I dont want to end up in the same situation. So we didnt use the certificate.

After one repair to my 9 year old microwave we decided to replace it. I am so sorry I did! The old microwave had a stainless steel kit and was made with quality. The replacement is a piece of junk! The outer kit is plastic and shows fingerprints like crazy as well as the microwave itself! Im always wiping it off. The flimsy door button is impossible to open without pushing it ten times in the right spot! The door doesnt close easily either! The front of the microwave is warped and wavy! I hate it! The quality of your microwaves has dropped to zero!

Updated on 12/30/2018: Again had GE up, said it was not the pump as they stated. Hired a plumber as they requested, pipe not blocked. Changed connections and now the machine has no power. Again have to call for repair. I am sure they will have to order a part or tell me to call an electrician. I am so done. Please beware. Do not buy. Still not been able to use my dishwasher going on 4 weeks and brand new.Original Review: Purchased from Home Depot. I have had it for only one month used 4 times. The water did not drain. Called GE Repair. Guy came down, couldn’t figure out what was going on, said it must be the pump or it could be blocked. He went downstairs, could not find the pipe. Been there since 69...said he is going to order part. Waited 1 week. Then he calls me an hour before he was to be here. Mind you I took off work to be there. He said, “Did you have plumber to come in to see if there is a blockage and he needs to show you where the connection is?” Are you kidding me. I told him I am handicapped and having company for Christmas and I need it. He said he can’t come until I hire a plumber as he can’t find the dishwasher connections. Are you kidding?I said, “Can you come and install the pump and if it doesn’t drain then I will call the plumber.” He said no as he can’t find the connection...I am going to put 150 to have a plumber come when I know it’s the pump not a blockage to have the plumber show me where the dishwasher is connected because the idiot can’t figure it out. I said I need it for Christmas. Nobody working until next Wednesday. Do not get a GE. Poor customer service and to break down a few weeks after purchasing is unacceptable. I had A Bosch for 6 years, never a problem. Plus the lower rack tracks already fell apart. I live by myself and does not get much use. I read the reviews and should have known. The only reason I purchased I needed the bisque color. BUYER BEWARE.

Model # JVM1752SP2SS - I have had my microwave for 5 years. Last night, my husband and I started smelling burning rubber. That lasted about 20-25 minutes. Then my husband heard a strange sound coming from the kitchen. When he went to investigate, he found our microwave on fire.

We bought a GE cafe series microwave (model/serial number: pnm919sf1ss/gd235771b) and 4 months later it ceased to function. We just had a remodel and for the first time had an expensive, over the oven microwave and were very excited. Unfortunately, unlike the 2 cheap microwaves weve purchased in the last 36 years, this one we had used for 3 months total, developed problems. The motor seemed to surge and then it would go off. Half an hour later it came back on but would only work for about 5 minutes at a time. I called GE and they arranged for a local company to come take a look. They insisted on a 4 hour window and fortunately my husband is retired so he could be there. The repairman came and didnt have a clue as to what was wrong. He called his boss who talked him through diagnostics. After an hour he left, saying hed be back in a week with some new parts. Again we had to wait the 4 hour window. He came in and we were on pins and needles hoping he wouldnt scratch our cabinets as he took the unit down. He replaced the microwave component and when he left it worked. Two days later it again died. I called the repair people and they told me I had to call GE to get permission for another attempt at repair. I called GE and they said I had to call customer service to file a report. They told me I had to make an appointment for a technician to come out to see if the microwave could be repaired. Really??? The technician would try to repair it again or decide it couldnt be repaired and needed to be replaced. Like we have nothing better to do than wait for these repair people who have no clue as to how to repair the microwave. Every time they take down the microwave they risk ruining our cabinets. It was so unhelpful. I am really disappointed in GE customer service. We had to go out and buy a microwave to use while we were waiting for the repair. They obviously dont care that we cant use their expensive product. Our replacement microwave was $40 from Walmart and works beautifully. We finally complained to our WONDERFUL contractor who originally purchased the microwave for us and he is replacing it with a new one. He was appalled by GEs treatment. He takes note of appliances that are crap so he can warn customers. I thought I was buying from a reputable company and thinking we were getting a great and special product. Too bad.

My 5 years old over the range GE Microwave Oven in my old house had a keypad malfunction. I replaced that oven with a different brand. This time, my 2 years old GE profile microwave in my new house has the same keypad shorted like other users posted. I was hesitating to buy this brand at the time. But the look and match with other appliances, plus the good deal from vendor, I gave it another try. I made a terrible mistake. No more GE appliances for me.