Last year in November while we were sitting in our living room and watching TV around 11:00 PM, we first smelled smoke and then noticed fire under the countertop above dishwasher. Luckily, we were awake to put fire out and disconnect dishwasher. This was all stainless steel, top of the line Profile dishwasher, part of our all Profile line. The next day I called GE customer service only to learn that dishwasher was recalled and that we were never informed about it. Very generously, they offered to replace our unit with equal top of the line PDT750SSF0SS. Instead of taking them to cleaners, as my lawyer suggested, I was stupid enough to accept this offer. A week later, dishwasher arrived but straight out of box, the door was damaged and it was full of water for some reason?! Another week passed by and finally this piece of junk was delivered. This December of 2014, just 3 weeks out of 1 year warranty, dishwasher stopped drying dishes. I called customer service and when they learned that I never purchased extended warranty, they told me to hitch hike. They offered me special customer service number which I called, they placed my name on the list, and never called back. This is the worst company I ever had to deal with, the worst products hands down and the most horrible customer service. If you dont take this post seriously and do not run away from GE, I guarantee you will be writing one of these posts, few days after warranty expires. I have reason to believe that these machines are somehow programmed through their computer to stop operating after warranty is out. Monday comes, I am calling DA office and filing claim against this predatory company. BUYERS BE AWARE!!!

Ive had an overall good experience with the dishwasher although sometimes I feel that you have to do too much prewashing and the dish wash cycle takes a really long time.

I bought a microwave Model JVM316RF3SS on 6/12/16 from Best Buy. Here is the serial number GG242212A. This thing is tripping the circuit breaker, it is intermittent. I had been buying GE for the house because the stuff would last or they would stand behind their products. Looks like times have changed, I called yesterday to the customer service and the only thing I was offered was a song and dance. If you are to consider buying a GE product, think about it again. This microwave is only a year and a half, to have a tech service guy come out and look at it, it is was priced out at $97-108 for a visit and then parts and time will be added in additional to this visit price.They have priced this repair out to be cheaper to just replace it. My washer is making excessive pump motor bearing noise during the high spin cycle, this is two years old. Looks like GE is building crap. My background is a mechanical technician for over thirty years, building products that are to be used in the household should be built to last not become a disposable item like a cigarette lighter. Good job GE for joining the other substandard products being built. Must be outsourcing this to a foreign country like everything else. With the model and serial number GE you can call me if you have ANY questions.

Three years ago, we remodeled our kitchen and replaced all our appliances with GE Profile Stainless Steel appliances, stove, refrigerator, and dishwasher. Two months ago, the dishwasher, model PDWT580R10SS, stopped working. It was out of warranty, but the store where we purchased it said to call GE consumer service to see what they could do. They said that they would replace the parts for free if we paid for service. They said they would send a GE certified service tech to fix it. The two people they sent were dumb as a brick and after tearing apart the door, they decided that the controller board was bad and sent for a replacement. Two weeks later, they installed the new controller board and it still didnt work. They called GE and were walked through a troubleshooting guide and it was determined that the touchpad was bad. They ordered a touch pad and two weeks later, they arrived to install it and asked where the part was. According to them, it was sent to me and was at the post office, which it was not. They then asked to be paid for the three calls and I told them I do not pay for incompetence and would pay them when the appliance was fixed. Turns out, they gave GE the wrong address (their store) for the part and it was sent back. I called GE Consumer Service and talked to my rep who said she would send the part directly to me and that the service rep refused to work with me again and I should contact another service organization. The part came and it was not a touch pad, even though the packing list said touch pad. I called the GE rep, who is now a good friend and she said she would contact the store where we purchased the dishwasher and have them fix it as long as I paid for the parts. It is now two weeks since they arrived and diagnosed the problem. I just called the store and they said the part was backordered for another week. It will be close to three months before the dishwasher will be fixed if it can be. DO NOT, UNDER ANY CIRCUMSTANCES PURCHASE A GE APPLIANCE.

I work as a service tech for a major insurance company. I am a master tech, and master electrician. The company that I work for owns an apartment complex which is used to house company executives whose offices are located at other sites, but often come to the Chattanooga Site to work short term. I was called to repair an old dishwasher in one of the apartments. Upon looking at the existing dishwasher, I decided to replace with a new one. I received a new GE model GDF 510 PGD 1WW dishwasher on November 8, 2013. As usual I unpackaged the appliance and examined the exterior. Finding no visible damage, and with the help of a master plumber, I removed the old dishwasher, and installed the new one. After all the connections were made, I opened the door, removed all the packaging from the dishwasher, and found the upper spray arm lying in disarray in the bottom of the machine. Assuming that this was the way that the machine was packaged, I installed the spray arm, plugged the machine up and started the machine as the operations manual instructed. The machine would not work. The power lamp would burn solid for a few seconds and start flashing. I tried to start the machine a number of times while reading the instructions, and while my partner read the instructions aloud, but with no results. Finally, I used a screwdriver to hold the door switch closed, pressed the start button and the unit started. The catch mounted on the door would not make the door switch, mounted on the machine body. We tried to adjust the switch and the catch, but with no success.The dishwasher did not show any signs of exterior shipping damage, but for some reason the upper spray arm was off and lying in the bottom of the unit, I found a small piece of broken plastic and a screw in the bottom of the machine, and the door switch would not make. Outside that I have no complaints. I am not sure where this machine was assembled, but it certainly was not equal to the machine that we removed. Thanks GE for making my job harder. I will have to find another dishwasher Monday and replace the damaged one, and perhaps send this one back, but the replacement will certainly be another brand.

GE Dishwasher GDF520PGJBB - GE has the worst dish washer machines you can ever buy. In fact never buy a GE dishwasher in general. Maybe, GE makes good refrigerators but not dish washers. We bought this from Home Depot and after 6 months it collapsed: Pump broken, soap dispenser broken, panel doesnt work. We had before a Maytag and we used it for over 20 years without any issues. In addition, GE has the worst customer service you can imagine. They are robots, repeat the same thing with a very annoying tone, and are not able to solve a single issue. We were even harassed by GE manager Evan or Aven, useless man, from customer relation who enjoyed seeing how much frustrated we were. This was the only GE appliance we have in our house, and after this unpleasant experience with GE will NEVER buy any GE appliance, even if it was free. GE refused to fix our machine under the pretext that its not installed on Ply Wood. We didnt install the machine ourselves but professional technicians from Home Depot and they also refuse to put PlyWood under the machine as its not a requirement. They do it every day, but looks like GE have Lazy technicians.

I notice when cleaning the inside of the microwave that the coating on the top (ceiling) of the microwave has bubbled and cracked and there is a hole in the interior top coating. This unit is about 9 years old, and is a dual unit as the bottom is a convection oven with very little use. Im told I need to replace the microwave. I have never seen bubbled and cracked interior in many years of owning and using this type of appliance. The photo shows the defects in the lining coating. Im really upset about this.

Ive had this dishwasher for about 3 1/2 years now, and never have I been so dissatisfied with a product. I gave a review then, was contacted by a GE rep, followed their guidelines, even had a GE rep come out and review the problems. We changed our hot water temp, when we did dishes (not during clothes washing), checked to make sure the blades are not hindered, changed soap to Finish Gel (works best), added rinse aid. There is just not enough water to rinse off the dishes. Period. I do not add more heat/dry, and use Sanitize and Steam 99% of the time.What happens is the food sticks to the dishes and melds into them, causing permanent discoloration. This is no pot scrubber. It does no scrubbing! I have to wash my pots every time after I clean them in the dishwasher even if I pre-scrub them clean before washing! Sometimes the food from other dishes or the soap dumps onto the clean pot and makes it dirty! There should be a lawsuit against this company for this product. Its horrible! BUYER BEWARE! This rating should really be a 0 (zero)! Sorry I am not submitting proof of purchase from that time. We remodeled our kitchen in 2012.

GE Profile dishwasher - model # PWD8280N00SS - Appears that moisture got between the exterior panel and door that houses that main board. Because of the moisture caused a short that melted the main board, with harness and the ribbon from the on/off panel that connects into the main board. Luckily I was home at the time or this could have caused a significant fire damage in my kitchen.

It is functional and does the work. We are impressed with the large drum which takes a good load. It runs smoothly but with some noise. However we do not mind this as the end product is what we wanted.

Does just about everything my ovens do, but better and certainly much, much faster. Bacon is crisp, chicken tenders - tender, puddings are creamy, and on and on. Try poached egg or an oyster levant, wow.

I rarely use it. I know to avoid too close to the signals produced in the microwave and use it only about once a month.

I bought a GE PEB7227 Profile Microwave and after 6 months the door latch breaks. Service tech comes and says, Sorry parts are back ordered for 3 months (including new frame due to damage done to it getting the thing open). I call GE customer care. Explain that its obviously cheaper to drop ship me a new unit (and I will waive the new frame) than all of the parts, frame and a second call to fix the unit. Their answer, buy a new unit at a discount or simply go without a microwave for 3 months. Add me to the list of victims trying to warn others to NEVER buy a GE product.

I have a General Electric HVM1540DN1WW over the stove microwave that I have had. This month will be a year and a half. The oven stopped heating so being a DIY person, I pulled the oven out and took it to my workshop to see if it was something I could repair. Inside the front panel was a very helpful schematic of the whole oven. Using the troubleshooting step listed on the paper, I found that the Magnetron tube had gone out. So I went to my owners manual and found that the tube had a four-year warranty on it so I called General Electric consumer relations to have the part replaced. First I had to fight with them because they said it was only covered for a year. After about an hour and a half on the phone and giving her the publication number on the manual, she agreed that it was indeed covered for four years. So she said that she would replace the part and she would even send a technician out to install it at no charge. I was very happy at this point. She said that she would ship the part to me next day with UPS and the tech would be out the following day to replace it. So far so good, till the next day when the part did not arrive. I called back in to General Electric consumer relations and spoke with a man this time and he told me that she had canceled the order that is why I did not receive it, and he couldnt see why. So he looked at the comments she had made the day before and did see that she said she would replace it and send a tech. The tech was supposed to be here the next day and I had no part for him to install. The man said he would place the order and have it shipped to me by the next day no later than 10 a.m. and the tech would be here between 1 to 5 p.m. Great! Until the next day and again no part when they said it would be there. Again with the call only to find out that it was scheduled to arrive next day guaranteed by 7 p.m. The tech is supposed to be there with in the next few hours and I wouldnt have the part. I called Fed-Ex and sweet-talked the lady into getting a hold of her driver to see if she could get to me ASAP. Bingo, next thing you know I have the part, the tech calls and the part is replaced. Oh boy, the big gaping hole above my stove is finally going to be filled once again. (I promise I am coming to the end.) After reinstalling the oven, I found out that it was taking longer to heat than when I got it, and it has a brand new Magnetron in it.Again with the call to General Electric consumer relations to set up another tech to come out and check it out. So the following day, the same tech arrives and puts a cup of just barely cool water in it and puts it in for 30 seconds, pulls the water out and says it is working just like it is supposed to and leaves. Well, again I called General Electric consumer relations to let them know what has transpired, but this time I asked to speak with someone higher up the food chain. I then spoke to a lady and she said that she would set up another tech to come out and check it out, and if it resulted in the same way that she would replace the unit with a new one. The following day, the same tech calls me and said that the oven is working the best that it could so I should call back to consumer relations as he did and set it up for a new one to be sent in its place. So I called once again and was not able to speak with the same lady and the only thing she could do is send me a voucher for $250 laying around for a new oven, but I would have to purchase one and send the voucher in with the receipt to get a refund. I told her that I did not have a spare $250 dollars around to go buy a new oven and then wait for the refund to get to me. So I asked that she have the lady that said she would replace it to call me back to straighten this problem out. Finally the following week, the lady calls me back and said, This is the best that I can do, due to me voiding the warranty. I asked, What? She said that the tech that spoke with me said that because I had hard wired in the unit to the house wiring, it was receiving low voltage so she couldnt do any better than that. I told her that was the most asinine comment I have ever heard coming from a field tech and asked her whether he went to a school backyard Techs-r-Us. I asked if she would have the tech call me to explain. I also gave her some friendly advice that she should not use that comment to anyone else for fear of someone laughing at her. We agreed to have the voucher sent if that was the best she could do. I will not buy another GE appliance again! I have purposely not mentioned anyones name because it was the experience, not the person that I spoke with.

We purchased a complete kitchen of Profile appliances. Everything is fine except dishwasher! The first one didnt clean food and left scum on everything... The company sent service several times replacing many parts.... finally gave us a new one... It still doesnt clean. It will not remove peanut butter, avocado, and my teacups are perpetually stained dark brown. My old dishwasher, Kenmore, left my dishes sparkling... no matter what was on them, plus I didnt have to run my kitchen sink to get hot water first! I will not use GE in my next house which will be built in about 3-4 years.

GE Profile microwave PNM1871SM1SS - After 5 years of intermittent use in our second home, the magnetron crapped out. Research finds this to be a chronic problem with them. GE has sold an inferior product & has no intention of making it right with consumers. GE can only fail in the marketplace, soon relegated to just another so-so company struggling to survive. Goodbye GE.

The GE microwave installed in my new home caught fire on its own. It is less than 3 years old. GE Consumer Relations Department refuses to replace it for free even when it caused a fire accident on its own. GE microwave failed in its safety standards. GE also has failed in its Consumer Relations. I will not trust GE brand again.

I purchased a dishwasher from GE 3 months ago and it broke, just stopped working. I called GE. After being on hold for an hour, they scheduled a repair call with At Bay Appliance, gave me a confirmation number and everything. AT BAY dispatch says they never received it and cannot schedule an appointment with me, I have to go through GE. I took the day off of work for this repair!I called GE again and was told to call Consumer Relations who apologized and scheduled a second call with AT BAY, apparently the only company who can repair in the SF Bay Area. Guess what? They say they never received the repair order and that I have to call GE. Again, I took a day off for this repair. What is this? Ive never experienced such poor service in my life.

I have a GE dishwasher installed by our builder. It is 6 yrs. old and for 6 yrs. it has been a problem. I already had it serviced in last years recall and now I get another notice. It is located close to our TV viewing area. and is so noisy. I hate to run it when we are watching TV. I would never buy another GE. We are also having problem with our GE double oven. I ruined several holiday dinners before realizing the temperature was 75 degrees where it should be. A replacement part is almost a $1,000. I would never ever buy another GE appliance.

I purchased the GE Spacemaker over the range microwave in 2006. It lasted 5 years with little use. It was the magnetron. It seemed to work fine, but wouldnt heat food. GE gave me a hard time to have the part shipped to me and said I would need GE, who charged $99 for just a visit, to install. I will never buy GE again. Products dont last and GE doesnt care to keep customers.

I have a GE microwave oven. The paint inside the door is peeling off and has been for quite some time but I never got around to calling them. I recently decided to purchase a new microwave and use my old one downstairs. I called GE to ask them about this problem as I didnt want to have this same issue with my new microwave. GE told me they would do nothing to help me fix the problem and I need to stop using it because it is a safety hazard. I told them the microwave still worked fine and if I need to stop using it, does GE offer any compensation for something that is obviously a defect. I was told, no, GE will do nothing. I told them Id even be happy with some touch up paint but the lady was so rude, she would just sit there and not say anything until Id ask, Are you still there? Granted my microwave is several years old but because of this door defect, Im being told basically I use it anymore even though it still works. I need to just throw it away. I have a new GE microwave on order but thanks to their horrible customer service will be cancelling that order and buying another brand. I also will not ever purchase another GE product. I told them this and they said, fine. Obviously they dont give a crap about their customers.

I have the GE Monogram series dishwasher. This machine has some great features. It lights up when the door is open. It is the quietest dishwasher I have ever owned. The only negative that I see is, it is slightly small on the inside.

Our microwave is of poor quality. Unit failed completely after a couple of years in use, like many GE products. This GE unit had a large rotating platter and easy controls, but it just stopped operating one day. Nothing could get it going again, so we replaced it with a Samsung microwave which appears to function well (only a year into use, so no way to know yet) although platter is smaller and controls not as convenient.

We built a new home in 8/19. Much to our dismay, the builder only offered GE appliances. We had a bad experience with a GE appliance in the past so we went with the most expensive offered, the Profile series. Nine months into our new home, the microwave push button to open the door broke (with food stuck inside). I was only able to schedule an appointment through an automated system. Days later, repairman breaks door trying to get food out. Parts were ordered and new date was set for one week later. Day before that appointment, I got a call canceling my appointment due to the part being on backorder. The entire call took 57 minutes. New appointment was set for an additional week. Again, appointment canceled and part was ordered from third party. Third appointment was a repeat yet again (but without a call and with repairman showing up). The rep did say she would send $70 for us to buy a small microwave while waiting. We are now at three weeks without our microwave being fixed and I have spent HOURS on hold trying to get to a resolution. Last representative asked why I even made an appointment if I didnt have the parts. What!! They have scheduled the appointments. I asked to talk to a supervisor but then was told it would be 24-48 hours before someone could call me back. The rep said this is the timeframe they quote for a callback but she didnt know when anyone would actually call. No idea how much longer we will have to wait-it seems we are at their mercy. When buying new appliances in the future, we will ask who services their warranty! Either way, we will never buy GE appliances again.

Run, dont walk, toward any dishwasher other than a GE. Problems with the dishwasher within one year - black residue on my dishes that felt and smeared like grease. Calls to GE repair resulted in the worst customer service I have ever experienced. One call returned at 4:00 am. After two visits, a lecture about how to load a dishwasher, I gave up. The effort of making calls for visits, taking time off work, rude repair technicians and being told it was not grease, I now have a dishwasher a few years old that is falling apart. Screws are now coming loose and the buttons are sticking.

I have had two service calls on this dishwasher (Model Number GDT65SMJ0ES) and it is 18 months old. The first was to replace the heating element, which was under warranty. The recent problem was a cut-off switch that will trip when needed. The technician hooked up his computer to turn it back on, a very quick procedure, and it cost us almost $100. This unit should have a trip switch like a vacuum or garbage disposal so that the owner can do it themselves. After that, if the dishwasher still doesnt work, then a call for repair could be made. By the way, the repairman was very nice and respectful to us.

A known GE microwave defect on this (GE JVM2070SK02 Microwave) models control panel has yet again resulted in our microwave not working and GE giving us the standby, pay for an appliance technician. I would like GE to own up and send a technician to replace the control panel and get it working since it’s a known issue.

Had to order filter separately. No one said anything about filter not included. So it holds up the whole installation process. So now we wait! Not Best Buys fault unless it is supposed to be mentioned. Last microwave we bought, filter was included, twelve years ago.

Ive had this stainless steel GE Dishwasher model GDF645SMONES with the controls in the front for nearly a year. The dishwasher constantly comes on with the slightest accidental touch. However the buttons that control the cycle settings are extremely difficult to operate to cancel the lock or delay hours features. I have to literally bang on the buttons to get a response. My thumbs are now sore from the constant pushing to cancel that lock and delay features that came on accidentally. Once locked, good luck in canceling anything. Im so disgusted with this $600 dishwasher. Complaints to GE and the so-called warranty company that turned out to be one and the same, have fallen on deaf ears from the day I got it. Do yourself a huge favor, do NOT buy this dishwasher. Customer service is awful.

Bought our GE Microwave (DVM1850DMWW) from Home Depot about 5-6 years ago. I can see a unit just failing; but to start burning, smoking and smelling is non-excusable. We were lucky enough to be in the kitchen at the time and catch the problem before it escalated. While the unit was just ok while it worked, potentially burning down our kitchen is inexcusable regardless of age. Time for a range hood and a small countertop model. A non-GE model.

Bought a PDT845SSJ2SS in June. Two months later, it has a leak. Good news, has a leak detector which shuts down the machine. Bad news is that it leaks and the leak detector worked! Called GE. We dont have an authorized service technician in your area. We will get back to you within 3-5 days. Three days later, after I had raised rain with my appliance dealer, he arranged for a local dealer to come look at the machine. Scheduled that appointment - it was Friday, and We only come to your area on Tuesdays and Thursdays. Next Tuesday is booked, so we will try for Friday. Then, someone from an organization called Platinum Services calls and says GE has assigned the ticket to them. Shes going to try to schedule a diagnostic appointment in the next 7-10 BUSINESS days. Told her to forget it (found out she was calling from Lowes and had to find a technician before she could schedule.) End of week 1. Following week, someone else from GE calls and asks if I was cancelling my service request. In the course of the conversation, she asks to confirm the model GE RANGE that I have. Kinda lost it on her... On Thursday serviceman from local dealer comes. Turns on the dishwasher - it leaks exactly where I had said it would. Need to order a part and GE will not expedite. End of week 2. Next week - crickets. Nothing, Nada, mushroom mode (in the dark and being fed BS). Called my appliance dealer today and told him to come pick up the dishwasher - says he cannot do that. I explained, “I will forfeit the money I paid - I dont want a dishwasher that leaks in the first two months of use.” He tell me GE released the part yesterday...whatever THAT means and he HOPES repairman will come next Tuesday to repair. So, I have had a new GE dishwasher for 3 months and it has only worked for 2. Be aware! I assume partial responsibility for this goat rope - I faithfully refer to Consumer Reports when purchasing appliances and electronics. I suggest you do the same... you will find GE listed AFTER BOSCH, KITCHENAID, KENMORE and others. Also, realize the GE brand is now a CHINESE company. Caveat Emptor!

If you have a choice, run away from GE like the plague, because if you have to make a warranty claim, it may become a nightmare. I purchased a new home May of 2015, and my wife and I paid for the appliance upgrade to the GE Profile, which werent cheap. Less than 2 months I noticed that the microwave had a burn spot on the bottom of the door where it sits against the exterior of the microwave, the paint was burnt from the metal, and the rubber seal melted. I did not think too much of it because the microwave still worked and unless you opened it you did not see it, so it wasnt so much of an eye sore. Fast forward to January 2016, my wife informed me that the microwave stopped heating, and that she was going to put a ticket in to New Home Warranty, I informed her that we probably need to go to GE directly as I knew that is what they were going to say. So I called GE and put in a Service ticket. They informed me that it was going to be a little over a week before anyone would be available to come look at it, to which I was OK with. The repair guy finally came. I explained to him in detail what the issues were. He opened the microwave, closed it back, wrote some things on his computer, and told me that he ordered a part called the magnetron tube, which sounded like something from the transformers. He told me it would be a week before the part would be ordered, so I asked him if it wouldnt be easier for them to just replace the microwave. He told me that it is a warranty repair and they have to try and fix it first and if not, then they will. The evening before the repair guy was supposed to show up to change the door and the magnetron tube, I got a voicemail stating that the part will not be received until the evening of the repair, so they rescheduled me for 2 days later. GE just assumed that I would be available, because I probably sit at home all day waiting for service repairs. I called back the number to see what was going on. I was adamant that they replace the microwave, because by this time it was already 3 weeks without a microwave. And with small kids in the house it was very annoying to have to put a pot on the stove every time you needed to heat anything. After 45 minutes, I was still nowhere with them, so I ended up sticking with their new appointment window. I was leaving for work 2 days later when I noticed the repair guy at another home in the community. I thought to myself why couldnt he have done our repair the same day if he were already going to be in the neighborhood? About 45 minutes later my wife called me and told me that the repair guy showed up to repair the unit, that they were supposed to repair a day later, only to be told that the damage on the door was caused by arching, and that it will happen again so the microwave is non-repairable, so they will have to replace it. He told my wife that she will be receiving a call from the warehouse within 24 hours to schedule the replacement once the microwave is available, but she could call the warranty repair department to see if they could expedite it. After another 25 minutes on the phone going back and forth we were told that it will be about 7-10 business days before the microwave may be available. Now it is good to note that the warehouse where they stock the product is only 2 hours away from where I live. So by the count of it by the time we receive a new microwave, it would have been about 5 to 6 weeks from the initial call to get the issue taken care of.

Renovated the kitchen and installed a new microwave. 2 adults in the house. First one lasted 4 1/2 years, too much to repair so bought another one. Because of the configuration of the cabinets we were limited to this dimension of microwave. Second microwave lasted 22 months, too expensive to repair. Now into our 3rd microwave. What has happened to quality products??? Everything now is chinese junk. So much for general electric formerly known for good quality, long lasting appliances.

One day after the new GE dishwasher was installed, I came home to find water raining down into my basement. My kitchen floor was destroyed. The installers came out a week later to look at it. They determined it was a faulty unit. They ordered another one. I started an insurance claim with GE. They sent a technician to look at it. 2 1/2 weeks after it was installed, the technician showed up. Surprise, it was leaking anymore (The water had been shut off for 2 weeks). Several days later the replacement unit arrived and was installed. Two days later, this one started dripping. I called to have it removed. The installation crew was scheduled to come back on Saturday to remove the dishwasher and get it out of my house. On Thursday, this unit started pouring water out onto my floor. The occasional drip had become a steady stream of water. More than a month after buying this hunk of junk, it was finally removed. Ive ordered a different brand of dishwasher. Ive hired a contractor to come and replace my floor. GE denies any responsibility. I will be starting a lawsuit against them. I cant say enough horrible things about dealing with GE.

We selected this microwave because it has a toaster and baking feature as our small kitchen would be better without a toaster oven taking up space. Turns out user must change accessories from glass to metal when using the toaster and baking feature. The space needed to store accessories rendered the space saving concept as useless. Also, the toasting is slow and does not quite equal what a toaster oven accomplishes. Also the baking/convection mode is so noisy, one cannot hear radio/tv. 30 minutes for a baked potato is a long time for excessive noise. We bought from Kitchen Solutions in the Bronx about May 2014.

When you use the vent fan it is very loud even in the low position. I would also like to see a brighter bulb under the microwave. I dont have much more to say except that the oven functions well otherwise.

We have had our GE Advantium for 4+ years and the paint has started to peel off the inside of the door. We have an extended warranty with Home Depot but they deem this a cosmetic issue which is not covered. The cost to replace the door (part only) is about $260. Not sure self-painting is safe. I read here that we are not alone in GE microwave paint peeling off inside their microwaves, in general. Has there been any recall or calls action against them for this shoddy product? We love having this microwave/oven but feel like we got hosed by GE and Home Depot.

Dishwasher broke after one year, just after the warranty period. The tech made two trips and couldn’t fix it, parts on back order for going on 4 months. Absolutely a nightmare experience along with rude customer service reps that want blame everyone else.

Have a GE dishwasher put into operation June 2016 (new home). In Oct 2016 we noticed a leak and a serviceman came out and identified a loose soap dispenser - tightened it. Next time we used it, leaked as before. Same serviceman came again, this time replaced both the main seal & spinning water distribution wand assembly. Again, the unit leaked and on Dec 14th same serviceman replaced the soap dispenser. Before he got too far down the road, we called as the unit again leaked. He blamed it on excessive soap suds - which he removed manually. Following his departure, we again experienced a leak. Same serviceman returned on Dec 15th. After review, he advised us the DW would be replaced and we should get a call within 48 hrs to arrange. On Dec 17th (still no followup from GE) the DW leaked again - we video this time. On Dec 19th called customer relations and after much discussion it was apparent GE has NO CLUE what the heck they are doing. ONE MORE repair trip was scheduled - this time they would replace the inside and outside panel! We are fortunate to be retired otherwise this repair process would have cost us about $2000 so far! How idiotic is GE?? How much have they spent to avoid replacing this unit? Believe me this is the LAST GE appliance we buy from them. Dont know how they stay in business. We are awaiting the panel repair guy as of this writing. Will update once this service has been completed.

We had a GE dishwasher installed by the builder when the house we live in was built and it was one of the ones which were recalled as a fire hazard. We didnt really have any issues with it though, other than it was a bit noisy. With the credit offered, we decided to upgrade to a high end Profile model. The sound proofing is impressive and it was actually hard to tell the unit was on, but that is the only thing you can say that is good about the machine. As a dishwasher, it fails miserably and often items come out dirtier than when they went in. OK, weve struggled on with that for some time now but today, a nasty burnt plastic smell brought us both to the kitchen to investigate. Sure enough, the replacement for the fire hazard was the culprit. Obviously, it will need some serious repairs before it is safe to use once more. Looking through this and other sites, it seems this problem is rife and GE is reluctant to deal with the issues. Well I think that will be our last GE appliance. Thank you very much and rather than throw good money after bad, we will put the repair costs towards another machine ABGE.

Our microwave was manufactured in September 2010 and we purchased it in October 2010. It has been used a few times a week for reheating leftovers. I have owned secondhand microwaves and unknown brand microwaves, and they have been more reliable than the GE Profile. My husband and I invested in the Profile series when we remodeled our kitchen. After a lifetime of moving and living in homes with much to be desired kitchens, we decided to spend money to provide ourselves with a functional kitchen. If I had to do it all over again, I would have saved myself the trouble and purchased my appliances from another company.After having to call GE to send out a repair person 5 different times to work in our microwave oven, we are left with a nonworking microwave oven. It seems that a company that has made record profits from their faithful American fans could do the right thing and replace the microwave oven with something that works. Perhaps they do not have such a product. They have offered to let us buy a new one at a big discount, but they have not clarified what the percentage will be. The problem I have with this is that spending one more dollar on a product with no backing from the company it came from would be asking for more let down. I believe Ill have this lemon removed and quit before I take on any more consumer letdowns.

Clean neat appearance over stove. Fast consistent heating. Easy heating options. Turntable on or off. Also, love the stove top light. Cost a bit more than I thought it would, but not much more than others.

My husband and I enjoyed our 1980s White GE Microwave and Stove/oven. But, after 15-20 years with the same appliances, we finally saved up for upgrades and purchased a new Stainless Steel (mid-range priced) GE Microwave and stove/Oven. I cannot begin to describe our disappointment. The Microwave is above our Stove/oven. Our old microwave had two powerful lights underneath it - one on each side. This microwave provides one small, weak light that does no good any time of day. Why would GE go from two great lights to one middle useless one? Also, the faint white numbers on the front keypad of the microwave are barely visible during the day - forget about seeing this when the light is not perfect. I foolishly assumed these numbers would be backlit on a black background. Onto the Stove/oven. The temperature is not accurate but that is something we can deal with. After the oven is pre-heated, the assigned temperature stays on the display pad - NOT the actual time. Who cares about the temperature you set the oven to - dont we all need to know when to check or take out our food? Our last oven always showed the time. We did not join the Stainless Steel bandwagon 10-15 years ago when others did - which we thought would be good for GE to get some kinks out. I Guess we should have waited 10 more. Proper lighting on your Microwave and The time on your stove/oven while cooking are not too much to ask for when we just dropped at least 2-thousand dollars!!!!!

We purchased the entire line of slate/GE/Adora appliances from Home Depot 11 months ago. The fridge has required a service call for a VERY loud freezer. The microwave is fine. The stove/oven is fine. The dishwasher is a GIGANTIC piece of junk! 4 service calls and its still clunking, tapping, grinding and just extremely loud. VERY DISAPPOINTED!! We can only run it at night because of all the racket. The layout of the sections for dishes makes it totally useless inside. It doesnt clean. Soap residue is everywhere. My old DW was quieter and more efficient. *Insert sad face here.*

GE Profile Microwave JVM1850DMCC - For the third time in 5.5 years, Ive experienced a magnetron failure in a GE Profile Microwave. The first failure was fixed under warranty. The second was so bad, the microwave had to be replaced, but it was no longer under warranty. I should have heeded the warning and gone to another brand, but on 12/31/10, I paid over $500 to replace the microwave with a new GE Profile to match the existing appliances. Apparently this was a big mistake as the magnetron has failed yet again. The microwave is on its own separate 20A circuit, so that shouldnt be an issue. It would seem, however, based on the number of complaints I see on this site, there is something inherently wrong with the manufacture of these microwaves, or more specifically the magnetrons. Im extremely disgusted at this point.

Updated on 12/30/2018: Again had GE up, said it was not the pump as they stated. Hired a plumber as they requested, pipe not blocked. Changed connections and now the machine has no power. Again have to call for repair. I am sure they will have to order a part or tell me to call an electrician. I am so done. Please beware. Do not buy. Still not been able to use my dishwasher going on 4 weeks and brand new.Original Review: Purchased from Home Depot. I have had it for only one month used 4 times. The water did not drain. Called GE Repair. Guy came down, couldn’t figure out what was going on, said it must be the pump or it could be blocked. He went downstairs, could not find the pipe. Been there since 69...said he is going to order part. Waited 1 week. Then he calls me an hour before he was to be here. Mind you I took off work to be there. He said, “Did you have plumber to come in to see if there is a blockage and he needs to show you where the connection is?” Are you kidding me. I told him I am handicapped and having company for Christmas and I need it. He said he can’t come until I hire a plumber as he can’t find the dishwasher connections. Are you kidding?I said, “Can you come and install the pump and if it doesn’t drain then I will call the plumber.” He said no as he can’t find the connection...I am going to put 150 to have a plumber come when I know it’s the pump not a blockage to have the plumber show me where the dishwasher is connected because the idiot can’t figure it out. I said I need it for Christmas. Nobody working until next Wednesday. Do not get a GE. Poor customer service and to break down a few weeks after purchasing is unacceptable. I had A Bosch for 6 years, never a problem. Plus the lower rack tracks already fell apart. I live by myself and does not get much use. I read the reviews and should have known. The only reason I purchased I needed the bisque color. BUYER BEWARE.

I purchase GE Profile appliances for my new home. I thought I had done my research but until I actually owned I found I feel differently. The microwave pad scratches very easy and after only a few months you can see which buttons I use the most. I’ve only used a microfibers cloth to clean and it scratched the surface. Appliance repairman said to use terry towel. Wish I’d known that. Secondly, after owning all Samsung appliances previously I now appreciate what I had. So many of the features of my past microwave are not on this GE. For example the vegetable good, built in sensory knew when vegetables were cooked. Also, soften butter and chocolate was another feature. Thaw meat knew when it was thawed. So my advise go for the Samsung microwave

Purchased new GE dishwasher after previous model lasted over 11 years. Family eats most meals and home and typically runs washer at least 4 times per week. New model was upgrade with stainless steel interior and all the efficiency upgrades from technology advances. Ran great for first 18 months then suddenly we opened one morning and notices water standing in bottom of machine. Emptied dishes, re-ran with same result. Technician called and spent an hour diagnosing to determine water pump, control board and wash motor would all need to be replaced at a cost of nearly $600 or 75% of what we paid for the unit new less than 2 years ago. Simply unacceptable that GE would produce such an unreliable product. We will be replacing with a different brand and would tell anyone to avoid GE dishwashers.

Purchased this item online and received delivery on 2/13/15 from P.C Richards. In less than a month after installation of the JVM7195SFSS microwave range oven the keypad stop working making it a useless tool taking space in my kitchen. Ive made more than 4 schedules for repair service. Its now May 15 Ive yet to see a repair person. Here are some of GEs lies for the past three months: GE parts were in back order; the service person claimed I wasnt home; I didnt pick up the phone. Even an appointment on my Sabbath was botched by the service person. While homebound recovering from surgery I called PC Richard who scheduled another service on 5/14/15 between 1-5pm. Still a no show. Yet PC Richards representative stated that the service person claimed that I wasnt home. The next morning 5/15/15 11:40am a service specialist named ** at ** extension ** calls stating the repairman is sick. Im confused! On what date was my repair? How do I get rid of this product installed in my kitchen wall? How do I get my money back? How do I make PC Richards and/or GE complete the repairs without losing a work day for foolishness or forsaking my Sabbath day again?

Bought a GE microwave and arranged to have it installed. Kept it in sealed box for 3 days until installer appointment. Opened box to find a crease (dent) in door. I phoned in to the GE warranty depot and they informed me that I only had 48 hours to report and as such was out of luck. They indicated that it is clearly stated in the Appliance Manual under the warranty section. Too bad that the Manual was in the sealed box. No warning on the outside of the box. On top of that the individual that I spoke to at the Warranty Depot was very rude. No more GE Appliances for me. Be forewarned.

The new home that we purchased had the above named dishwasher (GDT655SSJSS). When I run the dishwasher there is a very high frequency whine throughout the cycle - the only time it stops is when it is changing cycles. I have contacted GE Customer service 3 times... The first time I was told to add a quart of water to the bottom of the dishwasher and that should fix the problem. Tried that - still high frequency whine. Second contact - no response. Third contact - today- called customer service after my negative appliance review was rejected by GE (buyer beware of all those positive reviews) and was told that this noise is normal. Totally Unacceptable - since the sound hurts my ears and causes a headache - I have to listen to 111 minutes of this noise (except when the washer pauses to change cycles). This is the very worst dishwasher I have ever owned and even though it is only 2 months old I will be replacing it - and it wont be a GE Dishwasher.

My microwave on the inside paint start peeling off. I have this appliance 2 years, it has slowly been peeling since that time and now it has completely peeled and rusted on the inside. This WAS a gift. The outside looks great, the inside is so bad. The serial # is LT914637B model JES1451DN1BB manufactured in 2010, Made in Malaysia. Be Louisville ky 40225. Does the united States make anything except make us pay taxes. This is a piece of mess. The last 2 years my husband he suffered with LLC. Now I got to deal with this. Poor workmanship. I want GE to give me my money for the MW or total replace it. Rate 0.

Touchpad for CVM2072SM2SS stopped working. This touchpad has been creating issues for the last couple of years. Few reconnection of wires got it working for the last few times and now it is completely broke. GE is not ready to help with fixing the issue. It wants to sell me another microwave CVM1750SHSS which seems to have similar issues (also the plastic handle for those microwaves seems to fall apart due to heat). In fact, the reviews for the whole range of GE Cafe series seems to be pretty bad. GE is not owning up the design issues. Too bad!

Our GE Spacemaker XL microwave stopped working on 7/11/12. We purchased our house in January 2000 with the microwave included and have not had any problems with our microwave, until yesterday, when we woke up and tried to pop the kids breakfast in for a quick heat and it made a strange humming noise and you could smell plastic melting. All power was quickly turned off to the unit. Now to find a replacement for this built-in microwave is going to be a problem. The local technician stated the blower motor we need is no longer available. Thanks, GE, for at least 12 years of excellence. We are now looking for a similar replacement.

In January 2013, my husband and I purchased new appliances from Home Depot, including the above referenced dishwasher. The first dishwasher was delivered broken. The display panel was detached from the body of the dishwasher. At that point, I was concerned about the quality of the product. From the way it was detached, it appeared to be very cheaply made. (It was also installed incorrectly, causing a leak under our sink and ruining the bottom of our cabinetry. We settled this with Home Depot, but I include this detail to help emphasize my frustration over this whole situation.)When I contacted Home Depot about the faulty product, they agreed to provide a replacement, so I decided to give it another try. I wish now that I had simply returned the product and purchased another brand. Upon receiving the new dishwasher, I noticed immediately that the edge of the inner rack was scratched so badly that the plastic coating was gone, and rust had already begun to appear. I had to call customer service and get replacement racks. (More on this to follow.) Allow me to detail our service call records:Call #1. Heat dry didnt work at all. The technician told me that I needed to run the water in the sink and make sure it was very hot before running the dishwasher, and he changed the settings. This created a slight improvement, but not much.Call #2. Soon after, detergent tabs started to get stuck in the dispenser cups. I was using the exact brand recommended in the manual. The technician told me that detergent tabs were just the worst, and that I should try gel detergent, even though this is contrary to what the manual states. The detergent ruined my silverware, and I have had to purchase a new set, which I now hand wash.Call #3. Using gel detergent did not work. Technician came back, and told me the wrong replacement racks were sent. That must be what was blocking the water from getting to the soap. He ordered another replacement rack. He brought a plastic door, watched the water, and told me the upper arm wasnt spinning fast enough. He made an adjustment and claimed to fix that.Call #4. Detergent still not emptying from the cup. A different technician came back and used the plastic door. He found a different problem, but did not have the parts to fix it, so, another service call had to be scheduled.Call #5. Technician comes back, and finally fixes the detergent cup problem. For now.Call #6. Heat dry now does not work at all. There is so much water on the dishes that I have to hand dry them, and afterward, I have to mop my floor. There is just a massive amount of water in the dishwasher. In addition, it will not start except on a one-hour delay. Pushing the delay button does nothing to change the settings, and does not allow me to scroll through like it should. This appointment is scheduled for today, but I am not hopeful that anything will change.At this point, I have no faith that this dishwasher will ever work. Customer service did extend my warranty for six months, but that is the only concession I have gotten from them. That extension will expire soon, and I fear that at that point I will simply have to spend another $600 on a new dishwasher and leave this one on the curb. Its unacceptable for any consumer to have to purchase a new dishwasher less than two years after purchasing from GE.

After writing my review I was in the process of ordering parts for my dishwasher. I had a representative of GE in the parts department connect me to a GE manager. He was very helpful and understanding of the situation and helped resolve the issue with my dishwasher. My issue was with a customer service representative in the recall center when I inquired about anyone else having issues with their dishwasher and if there was a recall on the machine I purchased. Since I did not have an extended warranty the person I was talking to was extremely rude and would not answer any questions or concerns I had with the machine. I was not pleased with the customer service reps attitude and her ability to deal with the public.

GE Microwave Model JVM6175EF1ES - On July 26, 2014 purchased as a set stove, refrigerator, dishwasher and microwave. From the beginning I had problems with the microwave with the door had a bad connection and the microwave would shut off. On April 2015 the microwave started working without me starting it and I had look up and I saw sparks on the inside and I unplug it. GE replace it and now after 2 years I have the same problem just started and would not shut off and I unplug it. Both times I was lucky to be home. I would like GE to fix my microwave. I understand it has passed one year but, I think appliances should not break down after 2 years. I would like it fixed or replaced if possible. Thank you for your cooperation in this matter.

I have a newer (one-year-old) but base model GE microwave. I wasnt interested in lots of features, like convection cooking and such. I only use it to reheat coffee, occasionally heat a frozen meal, etc. It functions as designed, and Im very happy with it.

Our Spacemaker microwave, which was installed over the stove August 2008, suddenly stopped heating food. My husband called GE, and their phone advisor advised us the microwave was under warranty. She said her computer screen showed our product registration, and she also saw we owned three other GE products. Fast forward, the GE repairman came and said the microwave repair cost would be around $400. The heating part wasnt under warranty nor was the labor. Mind you, the entire microwave (new) was under $400. We called the GE service center, and they refused to honor what their representative had told us. The most they offered was 50% off. I dont accept the premise that a new appliance should only last four years. I will replace my unusable microwave with a competitor’s brand and will pledge never to purchase a GE appliance again. I will also sell my GE stock, for I now understand why its going nowhere.

Ive owned my GE Profile dishwasher for 6 years. Two months ago the pump had to be replaced and this is quite an expensive item. Then the other day I went to open the dishwasher and the doors spring gave away, hence slamming to the floor and crushing my big toe. The repairman said it was not the spring that broke but the link that holds the spring in place. The spring is actually quite strong but the link is just a flimsy piece of plastic. We are both anxious to see if the replacement link he ordered has been made stronger and are replacing both just to be sure it doesnt happen again. Although my toe isnt broken, it is extremely bruised and painful so I am going to be ever cautious of opening the dishwasher again.

I have to agree with other post about the customer service. Our dishwasher is only 15 months old. First call went fine after that everything is with email. Tried calling several times to get correct parts shipped after only getting one of three needed, I called and finally after 45 minutes an agent answered. After several attempts to get recommended parts and repairs we are now having additional issues. The quality of the GE brand has really gone down compared to our older products that lasted 15+ years. Now waiting for a new assessment of what the issue might be and hopefully will be able to get the parts without issue.

We had purchased the first listed model of dishwasher (Model PTD7505SSF8SS) and installed it on Aug 27/16. It worked for a total of 13 days and broke down on Sept 9/16. After a good deal of phone tag - a technician looked at it and said no less than 3 internal components had failed, the unit needed to be replaced. We were without the unit from Sept 9/16 until Dec 23/17 when the new replacement unit (Model PTD845SSJOSS) was installed. It worked for a total of 20 days and broke down on Jan 12/17. More phone tag... Tech looked at it and found a number of issues (motherboard, door switch, etc...), in addition - it had been leaking water under the dishwasher for the time it was in service. (All 20 days! What a record!)When a dishwasher leaks upstairs... It doesnt go well for the drywall ceiling downstairs. (The rep at GE was cold and calculated informing me that is what insurance is for!) Im not sure that is what someone who spent $1,699.00 for a GE product (in good faith of a reputable product) expects to be told by the individual who has the ability to make things right? At any rate, this is what you can expect from the trained professionals at GE. When they finally got around to looking at my file... They decided to simply replace the motherboard in the hopes it will fix the leak also.I would have liked a refund at this point (not likely) so I requested yet another replacement (given the issue of water leaking), they absolutely refused. As of this date Feb 2/17 we are still without a dishwasher. Goes without saying - no more GE products will enter our home and I will share, with everyone I can, the caring and kind words of support I experienced from the top level at GE.

I purchased this GE Profile dishwasher last June, I paid $1,499.00 for it and have had three (3) service calls. The first one said the water is not hot enough, the second one said run the water in sink and get hot before you use the dishwasher. The tech was here again this morning and called in to tech services and was told put plates on the right side of the rack only and the dishes will get clean. Are they kidding me? I called the 800 number for customer service and was told by Dominic (rep in customer service) that they would replace the dishwasher and allow me a 40% discount on a new one because this one is working as designed. It is my understanding that the dishwasher should wash dishes, so that tells me it is not working as designed. I want a new dishwasher, preferably one that washes the dishes and not one that I have to pay an additional 60%. Are you kidding me? This is not right. I have read the reviews on this dishwasher and it seems everyone who purchased the dishwasher I have are having the same problems and it is not working as designed. Please let me know asap when the replacement dishwasher will be delivered. I will not pay an additional 60% for another. It is not right that you would keep making excuses until warranty runs out. I notified you of this problem one month after I purchased it and I have lived with this problem for almost one year and now you tell me that you will give me a discount on a new one. I have already paid for a new dishwasher and that is what I expect in return. Thank you. I expect to hear from you soon.

Figure it out GE! The sixth motor and mode selector for our washer has been reluctantly ordered by a tech this morning. The second motor was installed months after buying the brand new machine. Now, only two months since the fifth motor and mode selector was installed (Dec 2, 2011), the wiring harness is burnt up. The tech recommends replacement of the washer by GE, but only gets push-back from GE. This newest incident included a horrific smell of smoke. I do not trust this machine. I have a wife and child to protect. Think about it - do the math - add your costs for repeated repairs. You do not get to be a company the size of GE by not understanding simple economics. Open your eyes and replace our washer.

I have a GE Profile model JT965SK4SS micro/oven combo. It came new with my new home. A couple years into it, the paint (lining) interior of the microwave start to bubble and peel and eventually started rusting. Had SEARS come out (warranty had expired) who contacted GE and they concluded it was only cosmetic that it doesnt affect the functioning of the microwave. Well, its gotten a LOT WORSE now, bubbled peeling paint all over inside, rust, exposed metal, and the paint is falling onto food. I can NOT even wipe out the interior to clean it, it makes more stuff come off/fall down. I called GE last week, was told by 2 employees that it is NOT safe to use anymore, discontinue use. I had SEARS come again (per GE). The tech said he had NEVER seen anything like it before. He called GE to tell them its not safe, exposed metal, and its dangerous. They again said, well maam, youve gotten 8 years use of it. We wont replace it, but will offer you a discount for a new one ($2,500 out of pocket for me). The person who had offered me the discount (yes, I sent pictures, showed how bad it is) also gave me a tip regarding the unit I have now with the exposed metal and the chance of arcing (spelled? like Ark) if the unit catches on fire, make sure not to open the doors, the fire should contain itself. 2 employees told me its not safe, a 3rd gave me helpful info for if/when it catches on fire... and yet, they still wont replace the unit... and do not stand behind their own products. I plan to go to our local news station, see if they can get anywhere with this, since they wont do anything. Patiently waiting and unable to afford a new unit.

Our microwave, model number JVM1750DP1BB, was manufactured May 2011. On Monday, Dec. 30, I was heating a bagel when the small plastic hook holding the rack caught fire. The interior of the microwave burned, but I was able to put it out before it spread too far. I shudder to think what might have happened it I had been in another room. Im irritated because I keep reading that this is a common problem. Im irritated because MY HOUSE COULD HAVE BURNED DOWN. Im irritated because it seems like GE isnt doing a great job at making it right. Ive attached a photo below, showing where the plastic pin burned. I can say that Im shopping for a new over-the-range micro, and it wont come from GE.

Ive had a GE Dishwasher for over 6 years and it works great. The issue is every 2 years or so, the plastic over the metal rods that make up the plate racks wear away and rust the underlying metal. The first time GE charged me about 200.00 for the racks, where the dishwasher only cost 250.00. The second time they replaced for free and now this third time, GE is being absolutely absurd not replacing these racks. My concern for mine is the health issues arising from having rusted parts in the washer. I believe this to be a manufacturers defect and could be happening in 1000s of these dishwashers. Metal should not go into water!!! GE should gladly replace my racks but theyre giving me a major problem, like take our offer or dont bother us. Please see the attached pictures and hopefully this doesnt happen to your dishwashers.

I had a blow up with my GE microwave which came with 2 metal racks. I used the rack once and the microwave flared up as if I had warmed something on aluminum foil. I removed the racks. The microwave is 2 years old. Last week I warmed a chocolate chip cookie on a paper plate for 10 seconds. Immediately the microwave flared up, the plastic bracket that the shelf rest on burned and melted. I was lucky no one was hurt or a fire resulted. GE came to inspect the microwave and offered to replace it for $258.80. I am arguing with GE. I want them to replace it free of charge. Their own technician tells customers to never use the metal shelves. I maintain that the design or brackets are faulty and GE should stand behind their products. This microwave was always used correctly. Do consumers have any rights at all?

No issues yet. But only had for 6 months so time will tell. Read a lot of negative reviews but none here. Bought in Nov ‘18 from Home Depot. Delivered and installed on time. Replaced 13 yr old GE appliances that were still working.

The little trap door which releases soap stopped opening when the GE top-of-the-line Profile dishwasher was one week past its warranty. Because of the design, all kinds of crud collects under the hinged door, meaning there is ALWAYS an odor unless we get down, hands and knees, to scrub it out. Features are fine -- as long as they work. Having a dishwasher that doesnt even dispense soap and cleanser isnt worth much, limiting us to the automatic feed with shine liquid. Stainless steel outside is impossible to keep clean. There are streaks and blotches within minutes of polishing with Sheela Shine. Suspect it has something to do with the humidity where we live, but it shouldnt happen. I find it strange that GE is perpetually sending me warranty extension offers for my refrigerator (which never fails), but nary an offer for the dishwasher or microwave/convection oven in the Profile line which have each needed repairs twice in the three years since purchase.

I am writing this more as an educational notice for consumers of the G.E./Rheem gas water heaters to aid in uninterrupted service and understanding of the water heater. Installation locations: If you have installed your unit outside, all though in the owner’s manual, it states that G.E./Rheem says to never install the unit outside. People that live in warm climates do have their unit installed as such, but in a metal enclosure, of which to the city codes are fine, but again not by the G.E./Rheem standards. So being as this is accepted by city codes, people do and will continue to install water heater outside in enclosures.

Reasonably priced. I dont cook in the microwave, however, I use it everyday. It has an up to date look and will match any kitchen. The GE brand has been around for years and remained a reliable appliance my family has relied on.

I have a GE Triton. We started a load of dishes before going to bed. When we woke up in the morning there was a terrible burning plastic smell. The dishwasher was stuck on, and ran all night. It wouldnt turn off, so we unplugged it. We are lucky that it didnt catch the house on fire. NEVER go to sleep with your dishwasher running. All the stuff you see at the bottom is plastic that dripped down. It melted the bottom of the silverware rack, and some silverware fell down to the bottom where the plastic handles of the knife handles melted. There is brown residue, so I think it did start to catch fire. Thank goodness we woke up early.

I called GE and they said they cant send a magnetron through the mail as it is dangerous. Well then, how do other companies sell a magnetron via their websites? They are full of it and I got the same issue, $59 for part and $89 for service call, and another charge for labor. What the....... I asked, Isnt the $89 the labor? She said No, that is the service fee. What a racket they have going on.I will not purchase another GE microwave, even though my other appliances are GE. My microwave is six years old. My GE refrigerator ice maker also stopped working after 5 1/2 years. I have had GE washing machine and dryer without no real problems after 12+ years. Maybe GE needs a class action lawsuit to shape them up??? Anybody up for it???

Our $599 GE dishwasher of 3 years is literally falling apart. We have a GE Slate Colored Stainless Steel Interior Dishwasher (GDT580SMFES) and over the past two weeks, the water stopped heating and 2 seals in the dishwasher started disintegrating. If you touch the seals (the main gasket at the bottom of the dishwasher and the main seal that keeps water from leaking outside of the dishwasher), parts of the seals come off on your fingers. We bought our dishwasher through Lowes with the extended protection plan and were having a hell of a time getting it fixed... Every time we call to make an appointment, its a minimum of 15 minutes on hold and it takes FOREVER for the new part to arrive/get the new part installed (almost 3 weeks now). So disappointed in our appliance and in Lowes for selling us such a lousy extended warranty. Never again!

Great microwave I have had for almost 10 years. It works like new. Its a name you can trust and not expensive at all. I have always believed in the GE name and their products. I have a dishwasher and dryer that work just as well. I will continue to buy GE products.

I purchased a GE Microwave Oven model # JES1139WL03 in late May of 2010. In early July, the paint started coming off the inside of the door when I wiped it with a damp dishcloth. I called Lowes, where I had purchased it, but was told that their warranty was only 30 days. I called GEs Consumer Support line and was told that for $65, I could ship the microwave to a repair center who would determine whether the machine could be repainted or would need to be replaced. I was told that either would require me to pay for it, since the machine still worked and peeling paint was not considered to be a warranty item. I guess if it catches fire, then they might warranty it.

GE jvm1750sp1ss microwave - bought in 2010, less than 4 years old has stopped working. Lights are on, but when we hit the start button we hear a small pop and nothing else. The clock does work counting down but nothing else. I happen to love this microwave, it was a gift for my wife. It now no longer works and cannot afford a new one. Option 1: replace parts myself for 150.00. Option 2: call a technician for 200.00 plus parts or option 3: do without. Option 4: wait to afford a new one. I guess all things grow old but we should have enough history on these items to post a life span. Well a story like this usually falls on deaf ears but if someone is reading, make the suggestion on the life span or make the parts affordable. Thank you.

While heating a bowl of butter, my microwave arced. Microwave had smoke and electric fire smell. I have contacted GE. They said it was a rare issue. From the reviews on this site, I do not believe that this is a rare issue. They offered a 25 dollar coupon to buy another one. I do not believe I would do that. GE has had microwave recalls in the past due to fire hazard. I have registered a concern with the Consumer Products Safety Commission.

A recall on a dishwasher: The heating element was replaced due to the fact they said it could catch fire. The bottom of the dishwasher is plastic. They replaced the heating element with the same kind of element that was there. How could that be any safer if the bottom is still plastic? I have children in the house; I feel this is a dangerous situation. I am dissatisfied with GE. This is the third dishwasher with the same problem in a matter of 5 years.

We purchased a kitchen full of GE Cafe appliances with our new home two years ago and yesterday the handle to the door came off in my hand. This is an $1100 microwave that is two years old. GE wants to sell me a new door for over $200. It just seems a little underhanded that we buy high-end appliances thinking we are getting a good product. My mother has a microwave the cost less than $100 at Walmart, its six or seven years old and has never had any issues! Show how much they can overcharge us for cheap merchandise and get away with it!

Purchased a GE Profile (oven and microwave unit) for over $3000.00 seven years ago. The protective coating on the interior of the microwave completely wore off down to the metal under the wheels of the turntable. GE calls this minor chipping (which it is not), advises to stop using the product, and offers a $100.00 off a new GE unit because they cannot fix it. The product should be recalled, just like Honda did when their Pilots were peeling.

Not even a year after purchase of new cafe series dishwasher, stainless lining rusting. Service called, GE tech agrees rusting of lining, GE warranty says not under warranty. Ive replaced screws that show signs of rust with aftermarket stainless screws. Cafe oven has had three front knobs just fall off - two were repaired under warranty and had to purchase extended warranty on third because it was more cost effective. Cafe Refrigerator had drain plate in back of unit completely rust away, tech knew what problem was before he stepped foot in my kitchen, he told us this was common. He caulked some sensor inside fridge box during service, I asked why, his response was its a design flaw and unit will operate better with this modification. Oh and redesign the ice dispenser, its tilted towards the back of the freezer and the ice is dispensed out the front.

We have a GE SpaceMaker JVM 239BV 001 over the range microwave purchased about 10 years ago. Within one year of installation the handle snapped - just as numerous people here have stated. I went to our local replacement parts store and was shocked that it cost $30 for a new handle. The sales person said if I were you I would by the lifetime warranty for an extra $3 because you will be back, I sell lots of these.

Updated on 06/28/2021: Nearly 8 months plus my mother waiting for dishwasher and now its the wrong one. Store where she bought it made a mistake. I didnt catch it till the dishwasher broke, She originally got the right machine but store marked it wrong on the invoice. Now on top of this the brand new dishwasher doesnt even work. It has a E4 code indicating a leak. Waiting over a week for serviceman. It always because of covid is the excuse for shabby service.Original review: I have never had such a problem in my life, first you have to phone then its either they put you on hold or transfer you to a voice mail. This is ok service until something serious happens then all of a sudden you dont get any call backs and stall tactics and simply dont listen. My mother bought expensive GE Profile dishwasher with 5 year bumper to bumper warranty that means nothing, I cant get through, tried to send form there no way to send it just a clear button??? Its supposed to be at least in contact within 48 hours to 72 hours. I have given them extra time due to Covid but I BEGINNING TO BELIEVE THAT IS JUST ANOTHER EXCUSE FOR THEIR TARDINESS. THE WARRANTY IS Excelsior guardian angel plan.

My GE microwave just 3 years old, from inside started coming off. Called the company they say its normal and harmless??

We bought all GE Profile appliances for our kitchen when we bought our home in 2013. Since then every appliance has had issues and have replaced parts on. The biggest disappointment was the dishwasher. It doesnt clean since day one. We bought extended warranty and had numerous service calls since we bought it through ABT appliances. Not to mention the dishwasher alone was $1000. We literally have to wash the dishes with hands because this dishwasher is only for show in our kitchen. I called GE consumer relation and they tried selling me another one with a discount for $950. What a joke. Will never recommend or buy GE products.

Last summer GE replaced the peeling handle on my microwave oven. I have treated the new handle with kid gloves. No abrasive cleaning products have been used and the oven burner under the handle is used infrequently at very lower temperatures. One year later its peeling AGAIN. All the burner control bezels on my GE Cafe oven have also peeled. The handles look like plastic covered with aluminium foil. Cant believe GE hasnt fixed this problem or issued a recall. I will NEVER purchase another products made by GE!

I have a GE microwave manufactured Nov. 2013, model #JES1456DS1WW, Serial # VA201954 L. I purchased it at Home Depot. I have had it about 2 years. Suddenly it started flashing PF. I unplugged and plugged, and reset the clock several times, but it continued to do this, about 2 days, then just stopped working at all. The GE website listed on the product proclaimed GE Cares; I couldnt seem to find anyone who did despite numerous calls. The only question I had was if happened to be any troubleshooting re my problem--I dont think they cared...

I called the toll free number because of the concern I am having with your microwave, the paint is coming off the inside. So my concern is first why would it be coming off, is it a defect in the product or does it just happen? The person was helpful and seemed as if it was to be concerning. WELL IT IS to me. Could it make us sick, do I need to put it in the trash or what? Thanks for not helping me and not being concerned, but I am sure if it was you or family you would have had a different story to tell.

Dishwasher lasted just little over a year when it broke down first time. Power switch made out soft plastic jammed up. Next cheaply made door close switch cracked. Part prices are average price. Because poor quality, I predict replacing this within 3-5 years.

I have had the GE Profile for approximately 8 years with no Issues. I learn something new it will do every now and then I had no idea was possible. I stillHave not conquered the convection baking and that is my fault. I need to use it more often since it wouldn’t heat up kitchen like the range does especially these hot summer days in Texas.

The GE over-the-range, model JVM316URFSS was installed in our new home by the builder. We have been in the house and used the microwave moderately for the past two years. Last night, out of nowhere, the microwave started running. I realized that it was actually heating when the glass turntable popped. I jumped up and opened the door to stop the heating. The turntable was broken. The interior was incredibly hot. Having read several reviews I realize that this is not an uncommon problem. I am going to buy a replacement but I am very concerned by the fact that GE is aware of this recallable situation and continue to allow this product to remain on the market. I will NOT purchase another GE because apparently they do not care. Our house could have burned down had we not be home.

We were super excited to get this GE Profile Cafe dishwasher. Minus the brand, it was the exact design/style as the one my dad has which we love! First issue, dont have a name of a dish liquid if you cant use all of them. Cascade apparently makes different detergent styles for the smart dispense. Dishes were ridiculously dirty and the horrible thing is I couldnt find an answer why on GEs site, I had to go to a handyman site. That was about a month and a half ago. Today, I did the dishes and, of course, let it do its thing. I always have the heated dry on by the way. Well, dinner came and I grabbed some dishes out which were screaming hot and I had to use an oven mitt. I didnt think anything of it because sometimes Im a sissy about that. Well, its now 3 hrs later and I get up to the smell of burning plastic. My first thought was that the sippy cup straw fell on the heating unit. I did not, however, expect to open it and see the Tupperware melting, the silverware rack melting and the water bar to be melting to the heating unit and it being so hot that I have to use an oven mitt just to touch the freaking rack. Oh! And by the way, we bought this off Craigslist last year and it was brand new. It still had the casing around it from the store.

We purchased a VERY expensive GE dishwasher (Re: Case: 13259178, Model: PDWT580V00SS, Serial No:MZ841691B) for over $1500 and IT DOES NOT WORK! It actually DESTROYS dishes! It leaves a thick detergent film on plastic cups and plates and renders them unusable. We have scheduled no less than FIVE technician visits and all of them refuse to indicate that the dishwasher is faulty and needs to be replaced or they would likely lose their job. All they say in their report is that the dishwasher is performing normally. So a dishwasher that DESTROYS dishes is NORMAL? GE is a $265 billion company. They have a customer that is infuriated with a faulty product that they will not replace. They are giving us the runaround and it is unconscionable. Any other consumer focused business would have replaced their product by now. Not GE. They have a huge infrastructure built to keep consumers from getting their products repaired or replaced correctly. This feels like Davey Vs. Goliath but we are going to prevail. My advice to all consumer is to NOT EVER buy a GE dishwasher, unless they like to have their dishes ruined.

I recently purchased a GDT696SSFSS Serial #SWGF800933C GE dishwasher. From the moment I tried to use it there was a leaking water to the floor from the back wall. I contacted the store that referred me to GE stating that their role ended when we received the dishwasher (long story..). I called GE service and when they came the technician said needs seal mat and offered to repair (the dishwasher has been installed in the garage since the water that comes out flood the kitchen floor and we cant afford having the floor damaged). But I had no faith whatsoever in this dishwasher (I was told if the problem happen again and damage my floor they will only offer to repair the dishwasher and I have to go to the insurance to repair my floor) or GE and said I wanted my money back. They did not even offered a replacement. It is still a brand new machine, I never use it.

Month Long Dish Washer Installation from Hell (Try #3 the best).Install Try 1 (I took off work for): Oops, I ordered the wrong hose. I am going to have to come back next week to install. I will call you and set something up. (installer). Next week Friday: Hello is this GE Installation services Umm its Friday and the guy never called or showed up this week to install my dishwasher I just purchased??!? (me). We then set up a time for the following week. How unprofessional.Install Try 2 (I took off work for): Umm still didnt bring the right hose. Can you go to Home Depot for me and buy the right one and bring it back? (installer). Ahh No!?! This is your problem not mine. (me). Well I will have to come back then. (installer). You have to be kidding me. I have to take another day off work?!? (me). Finally he gets a guy to come with the correct hose. Umm, can I borrow a screw driver and some tools from you?(installer). You have to be kidding me, sure? (me). Installer proceeds to drop the sides and fumble around banging the pieces on my NEW floor. Finally getting it installed. It doesnt look right. Dont the feet raise up and shouldnt the dishwasher be flush to the cabinets????!? and it looks crooked?? (me). Nope. (installer). I file a complaint and the guy removes my $60 install fee and sends another team out to fix it.Install Try 3 (I took off work for): 3 guys come and re-install dishwasher worse than the guy before them. From the other room you hear banging around and Oops, I broke a screw etc... This is what happens afterwards. Umm the plastic backing and sides are showing. Its pushed out farther than it was from the first guy. It definitely is NOT supposed to look like that. Plus its loose??? (me). Best we can do. Bye. (install team). This doesnt seem right....(me). Oh no, its leaking!!!!!!!!!!!! (me). So I called a plumber to come ASAP as I said before its NEW wood floor. New Plumber NOT associated with GE or Home Depot (who I probably will be getting a nice bill for calling last minute) proceeds to fix my dishwasher for the next 4 hours...Here is a small list of problems: 1) its leaking; 2) the foot vibrated off; 3) screws broke off; 4) damage to hose; 5) bottom plate installed at angle not even remotely level; 6) scratched up floor and cabinets; 7) installed too far forward and too low. This is the list. So far we still are trying to figure out where it is leaking from and if the dishwasher even will work. Thank god I actually got a Professional this time unlike GE/Home Depots teams. I then called GE Install services 1-800-432-7167 again and this is what they had to say: We already refunded you the 60 dollars. There is nothing we can do but we will file your complaint. I called again to speak with a manager and after a long conversation, he gave me $62 off my order. -- And let me tell you that is not going to cover the cost of the plumber I just hired to fix your mess. Not to mention the 3 days off work I took. Irritated I hung up. I bought a fridge, cook top, and double oven with GE along with this dishwasher. I wish I hadnt given them my business. Apparently, I am supposed to call back if the dishwasher doesnt work when my plumber is done working on it. Oh I WILL be calling back, you can bet on it. As for now I just hope he finds the leak... Moral of the story is NEVER use the install services they offer. You are better off getting your own plumber from the start.

My dishwasher broke within warranty in April 2014. The warranty expired on April 29th, 2014. Every 2 weeks another part was ordered to the tune of 10 parts and 8 visits (unpaid work days for me). I have been in touch with consumer relations about this and I was told that this would go on forever until their techs deemed the dishwasher as unrepairable but as long as it is repairable, they will not exchange the machine. And now they are telling me (October) that I could have had another service provider fix it but I would have to pay for it because NOW it is out of warranty. I cant wait until I replace my GE refrigerator and my GE microwave because those are the last GE products that I will ever buy. I went out last month and bought another brand as I will never buy GE again. GE protocol I am told is what determines all that happened. I suggest you do the same. I am writing a long letter to GE just to get it off my chest. Nothing will be done because its another corporation all about the money!!!!

I purchased a GE Dishwasher about two and a half years ago. Recently, we found there was a small leak in the solenoid motor which caused damage to my floor. I looked up for the model number and it is not on the recall list. Now, I have to call the repairman. This should have never happened in two years. What is GE going to do about this?

Bought dishwasher in 2016 for a vacation home. Used maybe 50 times, then door close sensor broke, replaced that and 2 months later, now board is no good. GE makes junk. Repairman also said that switch is known issue and they refuse to fix it. Never buying GE again.