I bought a 50-gal. Whirlpool electric hot water heater about 6 years ago from Lowes. About every two years, something goes bad. So far, I had to replace electronic control board that sits on top of heater twice. Then the heating element went bad. Well, this time, the electronic control board started to smoke and melt. I was home so I smelled something melting and found it. What would have happened if I was not at home? I have dogs that are like my kids; they could have been killed. Whirlpool wants to send the replacement parts knowing this part is no good. Do not buy a Whirlpool electric water heater! Now, Im scared the next time I wont be at home to find the thing smoking. I dont have money to buy a new one. How many other people have the same problem?

Since purchasing original refrigerator 2 years ago I have multiple problems. Freezer was icing up to the point where drawers could not be opened, after numerous service calls, door was replaced which did not resolve problem. Refrigerator was replaced on warranty. Soon after light control circuit board had to be replaced. Next light control had to be recalibrated. Now, with the unit being approx. 1 yr old, rust spots are appearing on freezer door. Whirlpool rep advised this problem is not covered on warranty and would not provide any information as to what company contacts could be used to pursue the issue. Very upset and disappointed with product and customer service.

Whirlpool Gas Water heater purchased from Lowes in 2012. Have replaced two thermal couples and three gas control valves. Will not stay lit! Problems began within six months of purchase. Third gas control valve quit functioning today and Im on my way to Home Depot to purchase a Rheem...Im done with Whirlpool!

I had my washing machine for about 10 days before it stopped working. I did about 4 loads of laundry. We have had 3 repair people come check it out, all referred by Whirlpool. They each had a different theory on why it wasnt working properly. Im now waiting for parts to be delivered and then service to be scheduled. When I contacted customer service, I was told (after waiting on hold for about 1 hour) that it was customer misuse. Ahem, first I heard that, and I think I know how to use a washing machine. I asked to speak with a supervisor. More waiting. Tina (#**) told me she will contact the service company about the parts. I told her to please conference me in on the call because I want to hear the outcome (and I dont want to wait another 1+ hour to reach customer service again). She put me on hold and then disconnected me! Really, all this time and 3 service people... Would be cheaper to just replace the machine altogether. What a headache!

It goes off balance, frequently. It is moldy and stinky. I wipe it out, use a cleaner and leave the door open, but it still stinks. I am getting rid of it and buying a Speed Queen top loader. I am extremely disappointed in the front loader Whirlpool.

We own a Whirlpool microwave hood combination. The door started cracking where the handle attaches. Ordered a new door and installed in July 2017. 18 months in the door and the handle have both started to crack again. This seems to be a problem with Whirlpool microwaves but they wont stand behind their product. Theyll send someone out to replace it for $$$$ but they wont admit they have a flawed product. One year warranty - no exceptions. Will have to replace the microwave and it wont be Whirlpool!

Bought washer just under three years ago and the tub bearing started to sound like a jet airplane. Whirlpool seems to have an ongoing issue with the tub seal which goes bad and then allows water to enter the bearing which then fails. Whirlpool will not make it right, I guess I will have to plan on a $350 repair every two to three years if I keep this machine. I am very disappointed with whirlpool for not standing behind what is a known problem. They should replace these seals under warranty so that the Bearing does not fail. Thats my opinion, recall the seals and fix a bad design problem. I would not recommend ANY whirlpool products to anyone at this point. What other problems do they have with their other products?

My husband and I purchased a Whirlpool Refrigerator, model number GI6SARXXF04, serial number K20311478 on February 3, 2012. It was delivered soon after. In April of 2012 our ice maker quit working. We called The Appliance Doctor for service. They reset the control, and left saying that they thought it was fixed. The ice maker as a result was not fixed. They came out again, and stated that the ice maker needed to be replaced altogether. So they ordered the part and we waited for two weeks for it to arrive and be installed. By this time it was April 23, 2012.Then in June of 2013 we began having water pool in the bottom of the refrigerator and freeze, and water began to leak onto our hardwood floors causing them to buckle. We cleaned it up for a while thinking perhaps something had spilled, and busted up the ice on our own. The beginning of 2014 we called for service from Lanny Adams Appliance. The technician worked on it and stated that something was plugged up in the water line and he thought it was fixed, we paid for this service on our own. On August 14, 2014 we had another technician come out because it was not fixed. The technician came out and stated that it would cost another $219.95. He further stated that he thought that there was a recall of some kind, that I should look into it. I did look into it and printed out the Technical Service Pointer that was produced in November of 2013. When I called Whirlpool at that point, someone was sent to fix it. Of course I had already paid to have it repaired in February of 2014, Whirlpool stated that it was not their responsibility, which again it was not fixed until August of 2014. As a further note, my floors were never fixed because I have hardwood floors throughout my house and simply cannot fix the area in front of the refrigerator. My floor had just been refinished, and after speaking with the floor company that had just refinished my floors a few months earlier, they stated all of the floors would have to be redone or it would not match. Figuring Whirlpool is definitely not going to pay for that, I have just dealt with it, since it cost me over $3000.00 to have the floors refinished.Now, it is February of 2015 and the whole refrigerator is not cooling, and the freezer is not freezing. Again, I woke up to water in the floor on my hardwood floors, and have had to move all of my food to my ten year old Frigidaire refrigerator that is in my basement and has NEVER had a service call. After speaking with service company, they state it will cost $1200.00 to fix the refrigerator....REALLY? So, now I get to go spend a lot more money for a new appliance. You can bet it WILL NOT be a Whirlpool!I contacted Whirlpool again, and I spoke with Robin in your Customer Service Department after speaking with one of your Customer Service Representatives that stated I was basically on my own with the repairs. Robin stated that there was nothing Whirlpool would do, but she would agree to pay for parts and I will be left with the repair labor. Although your company may think that this is good customer service, I have to disagree given the fact that I have had nothing but consistent problems with the refrigerator since I bought it. At this point, I would like to ask you if in your opinion this is a good appliance? I asked Robin and she stated that I needed to buy an extended warranty. Dont you realize it isnt about the warranty? It is about the fact that I have had the appliance for 3 years and have had consistent problems. I believe the refrigerator is a lemon, and I would like it replaced.I have always trusted the Whirlpool name, but at this point, I do not see myself buying another Whirlpool appliance.

Whirlpool front load washer was not working. I waited two and a half weeks for parts. The parts came but they cant fix it. I waited for answer for two more weeks. They decided to replace. After waiting two more weeks, no washer. Its going on eighth week, still no washer. Theres no reason we have to wait so long after paying for the extended warranty in this day and age, and paying good money for the washer.

As part of a new home purchase from Pulte, the combo oven/microwave can with the house. After one year of usage, the oven liner started the pile and crack. We have a two year Whirlpool warranty through Pulte our builder. When we called the dedicated line for Whirlpool-Pulte to report the issue, we were told that Whirlpool must send a technician to take pictures and see what is going on. The technician shows up and declares that the oven is damaged and repairable. But Whirlpool reject to replace the unit claiming that this is a cosmetic issue and it must have been reported to them within 30 days from buying the home, as this is their policy for cosmetic issues.We did some research on our own and we found out that Blue color liner ovens have a well known issue, but Whirlpool keeps putting these into their products. Our builder is not able to get them to replace the unit as well. I will not ever buy any of Whirlpool products. Be aware if you want to purchase any Whirlpool appliances, warranty to them means nothing, even when they know that they are shipping products that have faulty into consumers.

After the pilot light on my water heater would no longer stay lit, I contacted the Whirlpool technical support number listed on the unit only to be told my unit was still under warranty, but I would be responsible to pay a $65 diagnostic fee and any labor associated with a repair. The technician came and said my ventilation system was the problem and didnt even touch the unit. He then sent a report to Whirlpool that the unit was flooded which voided my warranty. He did not submit photos to substantiate his water damage claim and now Im being told the unit is unsafe and must be replaced at my expense. This all sounds like collusion to not honor the warranty! I will never purchase a Whirlpool product again!

I bought a Whirlpool washer in Aug. 2015. At the end of September I had to call and get a repair man to come out twice because my clothes got stuck way down under the agitator. Not only that, but it does not clean my clothes well at all. I am really dissatisfied with this washer!!

BEWARE THE TEMP CAN BE 25 degrees off high and 25 deg lower and Whirlpool says that is within specifications. My oven temp was set at 350 and nothing was cooked... After 7 repair calls with their certified repair companies (the 2 worst repair companies that I have ever used) I was told that if you set your oven at 350 that if it stays in between 325 and 375 that Whirlpool claims that it is working fine and will not do anything. I called and talked to customer service and asked the lady that if you set your oven at 350 should it stay within a few degrees of that and she said YES.The people that work at Whirlpool do not even know what kind of junk that their company is selling. I asked to return it and get a more expensive model hoping that it would work better but they said that they sell ovens and do not buy them. Be sure to get in writing from your sales person that your oven will constantly hold the temp within a few degrees. I tried to do the Whirlpool survey but after 11 attempts they said that there was errors in receiving and they did not get it. If you buy Whirlpool then you did not ask the right questions. I WILL NEVER BUY Whirlpool again (unfortunately I have a Whirlpool dishwasher and refrigerator that are not much better) and if you do you will say the same things and be out Thousands like I am.

Bought a Whirlpool Cabrio. Noticed it was getting really loud less than a year into owning it. Called while it was under warranty. The tech said it was fine. Within the next year and a half it got so loud, you cant hear anything else in the house while it is running. Now it is leaking from the tub seals and the bearings are going out according to two service techs I have had come look at it. They say it is more expensive to fix than the washer is even worth. This is due to the parts that would be used to fix it are the same cheap Whirlpool parts that were put in it in the first place. They both said that these are not good washers and commonly go out about a year and half to three years old. Shame on Whirlpool for making such a low quality product and not being willing to do anything about it.

2020 Maytag washing machine purchased Sept. 19 2020, never worked from day one. Agitator does not work, makes noise like the machine is struggling to work. Does not rinse detergent out of clothes. Water level is minimal. Went to the dealer Dufresne in Swan River, MB. They sent out a repairman which I paid for, I was informed many customers were complaining that these machines are nothing but garbage. I went back to Dufresne and confronted the sales woman, laughed in my face and told me to leave the store, I was totally taken aback by her rudeness, phoned Whirlpool, spoke to a woman who was very ignorant, I asked to speak to a supervisor who told me thats the way the machines are designed because they are made, DO NOT BUY WHIRLPOOL APPLIANCES, NEVER NEVER.

We bought this washer brand new and as soon as it was outside the one year warranty the bearing went out. They had to order a whole new drum kit. A MONTH later I had a running washing machine again. The day after it was fixed it started leaking underneath the machine. Serviceman came and looked at it and said No must be the hoses (my responsibility to fix). Nope kept leaking and two months later Im doing laundry and an entire load of water floods my laundry room. Drum broke again!! SIX WEEKS LATER I still am waiting for a new drum. I had to fight to get Whirlpool to fix it again and they wont even return my calls about why its taking so long! We are a family of 8, so doing laundry at a laundromat is outrageous! Dont ever buy Whirlpool washers!!!

I purchased by first Whirlpool Cabrio washer in 2007 with an extended warranty (my husband did not want me to buy). Thank goodness I did. The machine had repeated issues to the point that the service repairman and I were on first name basis. Finally, the mother board went out. The rust on the sides was excessive and of course my expensive sheets and towels were being shredded. Lowe’s extended warranty plan did honor this and replaced my machine with a new Cabrio washer (big mistake!). The new machine; receipt for this was over $1,600.00, including the new extended warranty that ends in 2014, was bought on 3-25-09. It now requires a new drum and bearings which are being replaced today (9-19-12); however, the corrosion is just as bad and my clothes are still being shredded. Oh, also the lid no longer locks and to get the machine to actually run. I have to physically hold down the lid until the lid locks. The repairman said that there is nothing he can do as the company will not repair this or replace the machine again under warranty! The joints where the lid attaches have rusted through and that is why the lid cant lock. The whole lid needs to be replaced and the company says it would cost about the same as a new machine about $690.00. What a rip-off this company is for the consumer! I will never, ever deal with Whirlpool again and I mean never, ever again! (sans Taylor Swift)!

This product is JUNK!! We replaced out hot water tank 1-07-11. Worked good for almost 9 months. Then the pilot light keeps going out. We have replaced everything three times already. Now we cant get it lit for nothing. Its blinking 7 times!!! This should not be happening. When you call Whirlpool, you always get some smart ** rep trying to solve your problems over the phone, telling you what its doing. Excuse me, your not here with it, I am. I even had the plumber on the phone, he got so mad at them, he handed me my phone back and said he is not dealing with stupid. They have no clue what they are talking about!! Its crap that we have to pay $30 for them to express mail a part when its the middle of the winter and we have no hot water. Im at my wits end with this hot water tank. Im ready to sue their butts. Sounds like to me by reading all these reviews, a lot of people are having the same issue. We need to do something about this. They had a suite against them but not for my water tank. They were replacing the parts. Ive spent over $1000 from buying it new, having it installed and paying for repairs on the hunk of junk!!!What can we do??? We need to take a stand against Whirlpool. We need to exchange information and contact an attorney and make them pay!!

We purchased a Whirlpool Cabrio about 3 years ago. Have never really like it. It doesnt add enough water to the wash cycle unless you use the bulky setting, which fills the tub up the entire way, so wastes water. It would have been nice to choose your water level like you could on the old machines. Now it wont drain completely and wont spin totally. Ive tried using the drain/spin cycle 2-3 times extra and it still wont spin all the water out. Ive noticed that there is still water in the drum, you can hear it slosh when you move the drum, so I wonder - has anyone ever been told there is a filter in there somewhere that might be clogged keeping it from draining completely? My husband thinks that maybe all the water in the bottom of the drum is not letting it spin because its throwing it off balance. And yes, it stops before the cycle is complete and just sits there and blinks and you have to unplug it to clear the cycle. What a pain. We will never again buy a Whirlpool and I absolutely do not recommend Whirlpool washers. I have a Maytag as well and have not yet had problems with it. Bought it at the same time we bought the Cabrio (2 households). At least the water levels in the Maytag are a little more normal. You can wash more than 1 pair of jeans and get them clean in the Maytag. For those of you with the problem of the clothes not smelling clean - try running the clean cycle with a cup of bleach about once a week. No clothes in it - just a cup of bleach in the bleach dispenser and nothing else. Works for us.

We relied on consumer reports as the primary source for a recommendation on this washer. Just under two years old, it started making a noise, which suddenly went away. Then one day the machine would not spin and drain, and we could not decipher the error code into anything useful. I turned the machine over to find that the drive belt was half-on/half off the pulley on the drive motor. This caused the belt to ride against the belt guard and wear right through it. I removed the belt and determined that the cause of the problem was that the large pulley on the drum was loose. For some reason the nut which holds that pulley on was slightly loose, causing the pulley to wobble. Not sure why they didnt use some Loctite on that nut. I put everything back together and tightened the nut. No problems and I checked it a month later, everything was still good. Fast forward to last week, when the machine was not yet 3 years old. Same thing, washer would not spin and drain. Tipped machine over to find that the belt had fallen off, the drum pulley was again loose. But this time the belt had damaged the pulley on the motor. I figured, no problem, just order a new pulley. Well you can buy just the pulley on the drum, but the pulley on the motor is part of the motor, it cannot be ordered by itself. The cheapest I could find the motor online was $250. We decided to cut our losses and buy a new machine. We will NEVER buy another Whirlpool appliance (or anyone elses by the same manufacturer, i.e. Maytag). Our last Kenmore washer lasted 23 years. Oh but it had an agitator and wasnt listed as HE (High Efficiency), so I suppose the environmentalists would get the dry heaves thinking about the impact of that washer on the environment. But it was useful for 23 years. Now this High Efficiency Whirlpool is headed for the recycling pile. Sorry, I think this hurts the environment more than an appliance which just works year after year. Yep, they took a design that worked and now we have energy/water efficient washers that dont last very long and are so expensive to repair that the solution is to just buy a new one.

I have the model FG1H5040T3NOV water heater and had found this message board. I called the number posted by Chris with American Water Heater and provided them with my serial number. They shipped me the replacement assembly next day and after about an hour, I had it installed and working again. Im not too happy with the fact that it failed, but it does appear they have their act together in getting the replacement parts distributed.Based on the discussion with the person on the phone, my only real gripe is this: the cause of the component failure was potentially caused by a dirty-flame trap that supposedly needs to be cleaned regularly. Since the trap is underneath the water heater and is in no way really accessible, relying on people to see the fine print in the manual (which hardly anyone reads) isnt sufficient. At an absolute minimum, a very clear and apparent sticker should be included on all water heaters indicating this needs to be cleaned and a clear description of how to clean it properly to prevent this sort of unnecessary headache in the future.

Please contact me if a class action Lawsuit has been filed for I am one of those who spent close to 3,000.00 for a lemon and to get the runaround. I spent every penny I earned to buy a long lasting fridge (Whirlpool Gold Series) only to have a headache ever since I bought it. Only owning a year the freezer went out, yes I had to endure the loud noise, no ice. Then the thing would spoil my milk and ham making my stomach to be sick. The temp is 60•. The people that Whirlpool sends out are in cahoots. Told me my compressor is out and I just heard it kick on. We are currently using refrigerator we brought out of the travel trailer kitchen because this thing sucked out all my money.

First, let me say we are so lucky and blessed to get home in time to prevent my home from burning. My Whirlpool range, model 4rf364pxk0, apparently decided to turn itself on (no one home) and grew hotter and hotter. It obviously burned out the thermostat because it was way hotter than cleaning mode. The key pad was melted and sagging inward the control panel warped, heat pouring from it. The racks and interior were glowing orange! My back splash tile blackened and cracked! The oven door locked! Oven hood ruined although it probably saved my cabinets! We hit the breaker! There was so much heat you could feel it on the outside of the exterior wall of the house 30 minutes later! The clean up to my kitchen has been horrible. Black soot and strange greasy film on everything and the stench has been toxic enough to give my husband a raw throat and myself a migraine! Oh and here is the ironic part - my husband was bringing me home from a hospital stay from high blood pressure! It would be almost comic if it wasnt so darn scary! Please, please address this issue before a more tragic story is posted! From looking at this site, it is obvious that there have been other incidence of your stoves turning themselves on and uncontrolled heat. I firmly believe another few minutes and our home would have been engulfed in flames. Now I will spend my weekend shopping for a new ceramic range, hood and tile!

I am an apartment manager. We purchased a Whirlpool Refrigerator (Refrigerator FFHT1817LW8) for one of our apartments. When it arrived it was missing a shelf next to the butter dish, also two of the bars that were to go in front of the shelves were the wrong size. This was at the beginning of April, it is now the second week of July and I am still dealing with this issue. The 1st company that was sent out to take care of the problem, A&E appliance, dropped my call so many times I ended up refusing to deal with them anymore. They also sent techs out 2 different times, and both times the wrong parts were ordered. Finally a different company was sent out and they told me that there was nothing that they could do, the shelf did not exist, even though the paperwork that came with the fridge showed a shelf next to the butter dish. Finally Whirlpool offered to order a whole new door but this would take 6 to 8 weeks...I had already been dealing with this issue for over a month. Home Depot stepped up and replaced the fridge; however, when the new fridge arrived it had the exact same issue, no shelf next to the butter dish. That fridge was returned and we ended up getting a completely different model. I canceled the door order with Whirlpool twice! It was supposed to be sent to Home Depot; however, Whirlpool still shipped it to our complex, and to a completely different apartment! It has now been going on 2 weeks almost 3 and the door has not been picked up yet! Despite my repeated calls into the company... I have asked to speak with a supervisor and was told that I couldnt. I have asked to be transferred to and escalated department or complaint department, I was told that I couldnt. There was a phone number I could call to give a compliment to.... LOL!! I would compliment them on their ability to provide the worst service I have ever experienced in my life! I was told a supervisor would be contacting me within 48 business hours, they havent. I have been told that they sent an email in a RED folder to their escalation department and that is all that they can do.... still havent heard anything.... seriously? I have now advised my company to no longer purchase any Whirlpool products... and its funny because we are going to be remodeling all of our units soon and that includes appliances... I have also shared my horror story on Facebook. Maybe as they are going bankrupt they will start to care??? Somehow I doubt it!

My 2 year Jennaire (made by Whirlpool) broke down on 12/14/11. Repairman came out on 12/19. He said that the compressor was not working and ordered another and he came out again on 12/22. He said that it could not be fixed (internal leak or something). An aside to this story was that a tank of compressed oil blew and damaged my hallway and kitchen walls and floors and 2 rugs. That was being handled by the repairmans insurance company.We called Whirlpool and they said that they we could pick out a new refrigerator priced at no more than $2399 even though we paid $2799 for the Jennaire and would have to pay the difference for a model costing more. We went with a Maytag (Whirlpool product) that listed for $2899 but was available at 2 local stores for $2050 and $2100 but I had to give Whirlpool anther $500 because they use the MRP.They finally delivered it on 1/5/12 but would not leave it because no one disconnected the water line to the appliance and they would not touch it. It took me 20 seconds to do it and if they would have told me so it would have been done on the 5th. Rescheduled delivery for 1/8/12 and the unit was delivered damaged (large dent in front) and they would not temporarily leave it until a replacement came.I called Whirlpool again and asked them to just call a local Home Depot or anyone in my area (all had the unit in stock) to deliver one but they told me that it must come from the warehouse in Michigan (I live in PA) and that it would be yet another 5 to 10 business days to receive it. So, I am paying $700 more for a unit that I could have bought and had delivered before Christmas not to mention the inconvenience of no unit for a month. Not to mention the damage to my home, $200+ dollars in thrown away food, time to shop for new unit, time for 2 repairman appointments and time for the 2 deliveries thus far and countless phone calls to Whirlpool to get the new unit.Today is 1/10/12, so I guess Ill have by month end if there are no other problems, you would think that they would try to expedite this just because its been so long or give us a substantial credit for all the trouble. Never again Whirlpool.

I purchased a Whirlpool refrigerator in Aug 2012 model G16FARXXF05 and in July 2016 the compressor died. I researched refrigerators before purchasing and was told by every store I visited that Whirlpool was probably the best and with the least problems. Unfortunately, for me that was not the case. I guess anyone can get a lemon!!!

We purchased a Whirlpool refrigerator (Model WRB322DMBM00) in April of 2015 from Lowes. Within 5 months rust stains started to form at the bottom of the top door and the top of bottom drawer. RUST STAINS!!! We do not live in a humid area or near the ocean. It is a design flaw I believe in the gaskets. I called Lowes first for their guarantee but they said it was cosmetic and not covered. Then I call WP customer service and they are sending new doors. Thats fine but its going to happen again. I requested slate instead of stainless steel but they wouldnt do it. Plus finger proof is a joke (monochromatic). Very dissatisfied customer.

Terrible wash machine. Some clothes come out having never even gotten wet. The spin cycle ties your clothes in knots so bad you have to machine dry them because the wrinkles are ridiculous. I’m all for saving water but if your clothes don’t get wet, how are they going to get clean? Also can’t do just a rinse and spin cycle. I would rate zero stars if I could. Don’t waste your money on this junk! Wish I could buy an old fashioned Maytag. Those washers were the best!

My stove has met all my baking and cooking needs. Love the self cleaning oven and I mean it does clean every bit. Always bakes at right temperature. I love it. All my pies and cakes come out perfect and the look of it is just pretty and matches my kitchen.

I bought a Whirlpool washing machine on 16 Feb 2011. I started having problems with it in June. It was making very loud noises when it was agitating and the clothes were still wet after the spin cycle. I called Nebraska Furniture Mart where I purchased it and they said that after 30 days, I had to call the manufacturer. I called Whirlpool and they sent A&E out to fix it. The technician that came out spent an hour trying to figure out what was wrong with it. When he was gone, I was left with two inches of water on my washroom floor and I had to pull the washer and dryer out myself to wipe it up. He ordered a part that came the next week and a different technician came out to put it in. After looking at the washer, the second technician said that the first technician diagnosed it wrong and he ordered a new transmission for it. About a week later, the transmission arrived at my house and a third technician came to install it. The washer worked for a few days and started acting up again and leaking water. I once again called Whirlpool and they sent yet another technician out. I told Whirlpool that I had lost faith in A&E so they sent All Appliances out. The technician from All Appliances said that it needed a transmission and he would have to order it in. A few days later, he came back to install it. It worked for a few loads. The leaking had stopped but now, it does not spin out the clothes. To make matters worse, it now releases the Downy at the wrong time and I now have blue spots all over my clothes. I have made repeated calls to Whirlpool and talked to two different managers. I asked the first manager for her direct number so I wouldnt have to go through the whole explanation again if I needed to call back. But she gave me her number without her 4-digit extension so, there was no way of finding her again. When I talked to the second manager (by this time, I have lost my patience), I told him my whole story and I told him that Whirlpool has spent $1,000.00 between parts and technician service on a $460.00 machine and it still doesnt work. It is a lemon and I deserve a voucher for the full price to purchase something different.After one and a half hours on the phone, Lukas informed me that the only thing he could do was to send yet another technician to my home. I have lost all faith in Whirlpool and I believe that they do not stand behind their product. They only push you until the warranty has expired! I will never buy another Whirlpool appliance again!

We purchased the Whirlpool Gold Gas Range (model #GW399LXUQ06) in November 2011. Last week, I noticed the porcelain enamel finish on the stove top grates has fallen off in pieces. I contacted Whirlpool today, February 14, 2012, about this issue and they advised me it is a cosmetic problem which is not covered under the warranty. They advised me that it would cost over $100 per grate to replace. We have had this stove for less than three months and I feel these grates are defective and Whirlpool should be responsible for replacing them. I am very dissatisfied with this stove.

We purchased what we thought was a top of the line, high quality washer and dryer, Whirlpool WTW7800XWO approximately a year and a half ago. It has the glass top with a plastic frame, which has just cracked at the hinge location. I went online to read reviews and then called the Whirlpool Customer Service number, 1-800-253-1301 for assistance. I was thinking after reading the reviews that this should be a simple recall type discussion; however, I got completely the opposite! I asked if this was a common problem and the response I got was, Well, we have had people sit on them, stand on them and fall on them, so they have broken for all kinds of reasons! I was flabbergasted! Of course, I was then told it was out of warranty but he could sell me a new one for $219.38 plus tax plus shipping for a grand total of $261.17. It is clear that Whirlpool does not allow their employees access to the complaint line. This must be kept top secret because the only people that know are the thousands of people that have called in to complain, and once you listen to a complaint, you are fired so you cant hear another one and figure out this is a common problem the consumers are getting screwed on! Every appliance in my house is a Whirlpool and the first to go was the washer after 11 years, which is when we bought this new set. When we have to replace the rest, dishwasher, fridge, etc., it will definitely not be Whirlpool unless they do something about known problems and help the consumer out, especially in an economy like this because bare minimum word of mouth advertising is the worst kind to have! I will now see if someone from Whirlpool reaches out to me or not! In the meantime, I will go to Change.org and sign the petition, never again to purchase a Whirlpool product!

Whirlpool Cabrio Platinum washing machine: You wont believe this until you call a parts replacement place for tiny part. The plastic (or vinyl) lid hinge bearings are located at hinge corners of lid. Hinge pin passes through them, one on each side. Half the size of a penny, UNCONSCIONABLE greed at the price of $32-$33 dollars EACH when ordered from a parts place. IMHO, design by INTENTIONAL failure to fail after three or four years. As a result, the lid will not stay up on its own. Then you find out the horrible news which is an insult to intelligence. Id have expected to pay maybe two or three dollars each, but NEVER the price they are demanding. Theyve got you and there is NOTHING you can do about it. At that rate, parts would run tens of thousands of dollars to replace the entire machine, part by part. These greedy clowns make car dealers look like reasonable people! The LAST Whirlpool machine of ANY kind we will EVER own!

Whirlpool Gold Refrigerator, #GI6FDRXXY07 ICE MAKER PROBLEM - Ever since we bought this ref in 2012, we have been facing problems one after the other. First the refrigerator was shutting off on itself thawing the food the ref & freezer. (When we were on vacation, in summer of 2012 , it was a disaster when we returned home.) This a continuous on going problem... not fixed. Second 2012 Spring the Icemaker shuts off spilling water at the dispenser, when called customer service they sent a technician who replaced the ice maker. But again the icemaker is spilling water or leaking now. Third 2013 Winter, the bottom freezer was leaking and ice buildup at bottom. We have been having problems ever since we got this. WHIRLPOOL YOU HAVE DISAPPOINTED US, its been an exasperating experience. Please Help, its not our fault for your poor design & faulty product.

In 2008 I bought a Whirlpool range from Lowes. About a year ago I began to notice an electrical smell when I would use the oven. I called the repairman in October and he had to replace wires that had melted. The first time using the oven blew a fuse. Repairman came back replaced everything for free and it has worked fine since October. 2 days ago the fuse blew again. When I flipped the breaker in order to use the cooktop there was an arc flash which blew a hole through the back of the panel on the stove where the cord is hooked to the stove and a hole burned in my wall. After reading Whirlpools fan mail I see that there are severe issues with the quality of Whirlpool products. It is a sad day when the names we have come to trust are more concerned with the bottom dollar than with customer satisfaction with their product.

We purchased this washer on 2008-04-27. It ran okay until a few months ago when it began making strange intermittent noises. This is now happening more and more often. I reviewed a lot of websites and see that this is a common occurrence for Whirlpool Cabrio washers, and Whirlpool will not stand behind it and make it right. Im going to write them a letter mirroring what Im saying here, and remind them that other appliances in my house are coming due for replacements or upgrades. Whirlpool and its affiliates will not be part of those upgrades going forward. I have no patience or tolerance for expensive **, which is what they put out here. I will have to purchase a replacement washer since this seems to have two major areas of failure, both extremely expensive to repair. I might check out Roper and see what they have--its apparently very well rated by the folks that work on these things.

This Whirlpool side by side 2 door Refrigerator/Freezer stopped working yesterday. It was manufactured in 04/2013, and I purchased it from Lowes on 5/26/2013. My invoice number is **. The last 2 refrigerators I have owned worked for well over 20 years each. Actually, longer, but I moved away from one of them. It is unbelievable to me that after 3 years, and 3 months, this unit has just stopped working. Of course, it is coming at a horrible time. In addition, it is summer time in Southern California, so the heat is high, and the desire for cold drinks and foods is also. It had been working well, until yesterday. Today, I am experiencing the foods become warmer and warmer. I will not be purchasing another Whirlpool Product of any kind.

My elderly mother purchased a Whirlpool Washer Mode Number WTW4955HW1 in November 2020. The washer has had nothing but problems. It leaks, vibrates and moves on the floor. My mother called Home Depot to see what she needs to do, and they said once they deliver the product it is out of their hands. Had our first service call in May 2021 by an authorized service and he said they should sell this on eBay. It is a horrible product, he said there is nothing he can do. Had a second authorized service in June 2021 and they said we needed a new tub which they ordered, and he said this will take up to 2 months, they also said to do only small loads and only use the deep-water wash and deep water rinse. After the technician left the agitator now comes apart. Would not recommend this product to anyone and I would never buy anything at Home Depot because they do stand by the products they sell.

Works fast and quietly. Easy to set up. Get the geek squad coverage and clean the filter at least monthly.

Whirlpool contacted me today about a review I posted on their website about the washing machine I purchased from one of their distributors. It was not to say they were sorry for the washing machine ruining our floor or our clothing. It was to say that they will not post my review because the model number is not the same as the one I purchased. Unfortunately for me my model was manufacture discontinued and although they look alike this new model is significantly different than the previous model it replaced (I will believe that when I see it). So they obviously knew there were problems with the earlier machine. I am outraged that whirlpool would stoop to such low business tactics to sell their garbage to people and then treat them like dirt.

Whirlpool Cabrio washer (WTW6400SW2) - After a few years of working, my washing machine lists a code of F50 and will not spin. After three visits from a repair company, they couldnt fix it and said we need to buy a new one. It seems like an electronic problem, but we have to replace the whole machine. Consumer Reports says a machine should last 10-14 years. Numerous people online have stated the same issue with the same model. More than one person stated there is already a class action lawsuit on this machine? Please help. Who can afford a new expensive machine after a few years of service?

Cabrio is our washer and dryer. Dryer had no issues in the last 7 years. Washer constantly throw UL or unbalanced error and stops. Rearranging clothes only works for another few minutes. First time under warranty, tech came and fixed it. Second time without warranty, I cleared some loose socks between the tub. Third time same problem. YouTube suggested to change the springs on four corners that hold the tub. $25 and problem fixed. Basically, if you are not an informed consumer you are screwed for $$ silly stuff.

I Purchased a Whirlpool range with self cleaning. I do not recommend anyone to purchase these ranges. The self-cleaning does not work at all. Like numerous reviews that said you can run them several times to do the self cleaning and they do not clean at all. Save your money. Do not purchase a whirlpool appliance!

Whirlpool provides free replacement parts to repair this design problem but wont pay the service charges to repair their design problem. I purchased a KitchenAid french door style refrigerator (KBFS25EWMS10, SN K31902118) and it leaks water on the kitchen floor. At first I just mopped it up but later discovered they have a design problem in their drain system and water backs up into the freezer dept and eventually on to the floor. Customer Service provides free improved replacement parts for this design problem but wont pay the service charges to have the parts replaced. Simply put, Whirlpool/KitchenAid do not stand behind their product quality, instead they pass the problem and service charge cost for their design problem on to the consumer. Beware of this appliance supplier!

Purchased a Whirlpool side-by-side refrigerator model #ED5KVEXVB07 in July 2012 from Sears for about $1000. Unit quit cooling late Dec 2014. I did not purchase the extended warranty, so the Whirlpool 1 year warranty was all I had. The repair technician (local company, not from Whirlpool directly) told me that the compressor had seized up, and the repair would be at least $300. I thought Id call Whirlpool just to see if theyd be willing to do anything for me. Long story short: No. I told the person on the phone: “I will never buy another Whirlpool appliance.” She said: “Im very sorry about that.” After I hung up, I thought: If Whirlpool was really sorry, theyd stand behind their products for a part that should not fail after only 2.5 years.

We bought our new Cabrio (washer and dryer) in the fall. Within 2 weeks, I realized what a piece of crap these machines are. They simply do not clean the clothes. I have complained to the store where we purchased them, and I was told there is nothing they could do as the machines are performing as designed? Im waiting for a class action suit to join to get rid of this junk. Curt

Whirlpool Cabrio Washer - A total waste of money. My clothes are never clean. The low water system is rubbish. It doesnt work! Check out my pictures below. That is the result of a 63 minutes wash cycle. Dont buy this piece of crap.

Whirlpool Cabrio Platinum Washer - Worst purchase ever! Washer will NOT clean clothes. It leaves detergent residue on everything and I use liquid detergent. All of my husband’s dark police uniforms have grey powdery looking streaks on them after they come out of the machine. Does not matter how I load the clothes. The horrible results are the same. Even rewash and extra rinse, streaks are still there. This model, Cabrio Platinum was very expensive! Never buy a Whirlpool.

I purchased my Whirlpool Duet washer about 14 months ago. After about 8 months, I noticed that it had started leaking. It was under warranty and the seal was replaced no problem. I then started to notice that my clothes were getting small tears in them. Around January (13 months after purchase), I got tired of finding new clothes and jackets with rips and tears in them. I finally found that the plastic piece around the entrance to the washer was rough and jagged. I called Whirlpool and they told me they could send out a service tech to file down the jagged edges. They told me this was a common problem caused by the zippers on jackets hitting the plastic and causing it to become rough. Because it was one month out of warranty, I would have to pay for the service call. The lady told me I could try filing it down myself. I feel like I should not have to file down anything 14 months after purchasing a new washer. I feel like I should not have to worry that my clothes are ruined every time I wash them. If this is a common problem as the lady told me, it appears to me to be a design flaw and should have a recall. I have lost several outfits and jackets due to this machine and I am very frustrated that Whirlpool would not stand behind their product.

Purchased side-by-side 3 weeks ago. There are 2 adults and 1 kid in my household and the ice maker in the unit does not put out enough ice to handle our small demand, though this was never an issue with the 14 year old Whirlpool that this one replaced! We are using ice trays to supplement what ice the ice maker puts out but the ice trays take up valuable freezer space. Their service reps have inspected it and tell me that it is performing per the specs and when I ask for what the remedy is, there is none... ie. too bad, so sad!! I am apparently on my own with a brand new refrigerator with an ice maker that wont perform up to minimum expectations!

I purchased a Whirlpool Cabrio Washer WTW6200 & this yr purchased a newer dryer w/ steam capability. I wish I would have waited a couple months for a new washer that yr and purchased the one with no agitator inside! But my washer died that day & I needed one & NO ONE informed us of the changes or problems of this agitator at the time of purchase. I have had this service several times my first year and the agitator replaced I believe twice. But it still destroys clothing. I called 1 month out of warranty and even though they had been out several times the first year for the same issue, they would not help me! Yep, even after the 1st year they said to get things done I had to purchase an extended warranty even though this was a mfr issue no doubt! So, 3-4 years later I still am dealing with the very same issue over and over with NO RESOLUTION in site and $900 in the hole for this washer and I am losing money with clothing damage weekly!Even today I had two pair of jeans, $98 ea rec these terrible uniformed marks all across the legs making them unwearable! At least for where they were intended to wear them at. They are now yard jeans...yep $98 expensive yard jeans now!!! These were my good jeans which I cant afford to buy more nor replace them so I have to do without. We cant wash anything with strings such as hoodies, shirts or baby clothing with spaghetti straps or little dangle things; we have to use the laundry mat and come home & dry w/ my Cabrio steam dryer which I love. Most everything I have to use zipper net bags but even then things still can get destroyed, especially if a hole gets torn in the bag from the wings of the agitator as you will see in the below photograph. I currently have & own an expensive washer I purchased from HHGregg by Whirlpool replacing a previous whirlpool I owned for 22 years! Yep, Im wishing I had it back & put the $200 some needed to repair it! Please Whirlpool will you please do something & make this right once and for all. I dont have $900 for another washer. I just want to be able to use my washer without it destroying everything I own. I have darn photos of what this is doing and you wouldnt believe it. It took us an hour, yes an hour to untangle a top that became entangled in the flaps on the agitator. This is the worst design I have ever seen and needs to be recalled once and for all and either fixed or replaced with new machines of equal model with the agitation issues resolved or removed & with no issues or further costs to your customers! Why would you honestly believe that an agitator with wings coming off the bottom that are not attached to the bottom would serve some type of positive purpose in cleaning clothing? All it is doing is tearing them to shreds, tangling them up, doing things to hoodies which make them unrecognizable after ripping the cords so hard out of the hoodies that Ive seen them shred the material across the collar area and opening of the cording completely ruining hoodies ranging from $35-$75 a piece even after placing them in mesh bags! Why did we keep placing hoodies in the machine? Well with 4 children at times they just dont listen or get all the info as to what is going on with the machine as 3 were college kids coming home periodically & yes, to do their laundry. Look, lets talk straight. You as a company from what I have learned from appliance salesmen locally and regionally, you knew this was wrong and knew this was your last ditch effort of an agitator before you knowingly knew you were going to an agitator-less unit on your washing machines & already had one ready to go out on the floors. I know that you Whirlpool CEOs knew this unit was a bad call but chose to ignore it. You had to know it because there was no way this could have passed quality control. It had to have failed sometime in its trials showing you the issues of the wings. Unless you never did any quality control on this unit and just rushed it through? Please to the CEOs of Whirlpool, I am asking you to make this right if not for good standing of your company do it at least for families like myself who cant afford to buy another machine and are now stuck with NEW machines yet going to Laundry mats. This was to be my last washing machine I would buy hopefully. I am 54 and was not planning on buying another. How do you think this makes your company look???? Im just so tired of dealing w/ Whirlpool to only hear I have to purchase a $400 extended warranty with no guarantee that they will fix the issue. If an attorney wants to step in & believes they can help us and maybe others then Yes please help us because this is absolutely ridiculous and is a product that needs to be recalled. We are out so much money now and like I said we are to the point we cant purchase another washer. We had to purchase all new appliances as they all began going bad around the same time.

I purchased this Refrigerator Model #wrb322dmb, bottom freezer, 21cu ft. last year on July 3, 2015. In September I noticed rust spots on the top door. I called Home Depot where I purchased and they directed me to Whirlpool. I did purchase an extended warranty with Home Depot. Whirlpool did replace the top door. Thought that took care of it. Today one year and two weeks out of warranty, I again notice rust on both doors. Called Whirlpool. They said too bad out of warranty, not considering I had a previous report of this very same issue. So since I am very unsatisfied with this result and the fact that an expensive product is rusting, I decided to share to try to prevent someone getting stuck. Stainless steel is not supposed to rust which leads me to believe that it is not Stainless steel, but a Stainless Steel finish and not a very good one. So I am stuck with a rusting $1200.00 refrigerator only after one year. I have always purchased Whirlpool, but no more. They lost a 40-year customer. I have always bought American made but no wonder people are not buying American made any longer. TO SUM IT UP WHIRLPOOL STAINLESS STEEL APPLIANCES RUST! DO NOT BUY!

When I bought this stove, I already had a glass top (Sears) which was satisfactory but I changed to get a convection oven, never had a problem cleaning the glass top. To me, Whirlpool was, and I emphasize WAS, a reputable manufacturer and the stove offered everything I needed. Not so, the glass top is a nightmare to clean; no amount of elbow grease works. It is like cooking on a mirror. Talked to everyone I contacted but, it seems, I am the faulty element in this problem: I DONT KNOW HOW TO CLEAN!!! YOU NEED A FIRST OF SOMETHING FROM TIME TO TIME AND THIS WAS A FIRST FOR ME.They told me the only solution they could offer was to buy their own cleaner. Why do they need to market their own cleaner? I did not buy a museum piece that needed to be treated with special care, I bought a stove to cook on. I want as many people as possible to know about that uncleanable glass top. Every time I need to cook, I cringe at the amount of time and effort I will have to spend to get it clean. I am not a novice, I have been doing housework for the past 60 years. Beware, it is a most frustrating situation to having paid top dollars and to be stuck with a product that brings such frustrations. By the way, it was bought at The Brick in Canada. They were not helpful either.

Our slide in range had a burned out element. After waiting a week for the part the range still did not heat. The real problem was the control panel at a cost of $300 plus labor. We were so discussed with the problem we purchased a different brand range. Who should be purchasing a new range after 18 months???? Cost of service call twice, part cost of element, and new range all total another $600.00. Do not purchase this product!!!

I inherited this microwave when we bought our house and have been very happy with it. It does not take up much space, heats well and evenly and the beep at the end of the cycle is not as irritating as other microwaves I have owned. However, I do find the glass turntable difficult to get back on track after I take it out for cleaning. It will wobble if not put back exactly right.

Our gas stove (Whirlpool WFG714hLAS1) has been working fine and it looks great. However I just tried the self clean cycle to clean it up. I dont do a lot of cooking with only the two of us, but I like to keep things clean. I was very surprised after the first time - it didnt look much different than before I ran it! I was used to simply wiping down the oven following a cleaning, just removing the leftover ash. I havent had to scrub an oven for many years and it is very hard for me. I ran a second cleaning cycle and it didnt look any cleaner. We both had to kneel down and try a variety of non abrasive cleaners which finally got most of the grease spots, but not all. I guess we will just have to cover the roasts and try to keep aluminium foil on the bottom rack as much as possible. PLEASE re-consider buying any brand stove that has this awful feature, unless you like cleaning ovens by hand!

I will never purchase from Whirlpool again. After 3 years of use in a 2 - person (adult) household, my Whirlpool Duet (WFW94HEXW2) washer suddenly stopped working with an F6 E2 error code. I unplugged / plugged in the machine, took off the top & checked connections, and let it sit overnight. I could not get it working. Speaking to a local repair technician via phone, he indicated it is likely the control board. Whirlpool changed that part from part number W10406632 to part number W10427967. Before spending the money on a service call, he suggested I contact Whirlpool to see if it is under recall. I contacted Whirlpools customer service. They told me the washer is not under recall but I may qualify to purchase their Repair + 1 service. When I expressed frustration at spending so much on a product that lasted only 3 years I was told This is not a known quality issue or recall. I will document a complaint for you. The chat session was then terminated by the customer service representative. We will spend over $300 to replace the part that Whirlpool obviously knows is flawed. However, I will not pay for an additional Whirlpool repair service to fix something that should not have broke in the first place. And Whirlpool (including Maytag, KitchenAid, Jenn - Air, etc.) will never get our business again.

Ice maker will freeze up every couple of week. I cleaned it all out last Saturday and today, Friday, it was frozen up again.

I bought my Whirlpool refrigerator (Fresh door with Ice maker) from Best Buy in July 2017. By 2019 December the ice maker had stopped working and the refrigerator turns off / shuts down automatically. Have confirmed that the power is still on because of the display on the door. So it is not a power issue. Paid $180 for a Whirlpool authorized consultation and they said the Ice maker motor does has stopped working and the computer board needs to be repaired. This will cost me around $800. Called up customer service to see if the cost can be lowered but of course they said a NO. I am truly upset with the brand and with Customer Service for their lack of empathy.

My oven had been temperamental since day one, then got worse over time. I do not use my oven that much so was not really worried or alarmed until a tray of cookies caught fire. It was set at 350 and jumped to 525 on its own. (I bought an oven thermometer to monitor) Minor burn taking tray out but all okay :-). Contacted Lowe’s where we bought it and they would do nothing (note: at this point the oven is 15-months old and out of warranty). Advised me to contact Whirlpool. Did that - they sent out a repair service and they determined it was the temp. sensor. It is now April 2014 and I am still waiting for the part (this all started Sept 2013). I have since talked and wrote to Whirlpool for this to be resolved and also asked that the range be recalled due to fire hazard at the least! When I spoke to them in December, they said they could give me ‘50% off the part’. Remember I am still waiting for that part, lol! After writing corp h/q, they said “Sorry, since we cant get the part why not have someone come in and take the old part out and have it rebuilt.” I ask you Whirlpool w/q would you be happy with that??? Will post any follow-ups... would love to hear from anyone else with this problem - model # GFE461LVS. Great day everyone. :-)

I have owned my Cabrios for over a year. They have given me no problems at all! I keep them cleaned with Affresh, even though Ive never ever had a smell in them. Also, I have never ever had my washer or dryer not do its job!! My clothes are fresh as a daisy and clean. I bought my Cabrios because my father purchased his first set and raved about them. So, I used his to try them out. Absolutely wonderful machines!! You get more area without those crappy agitators in the way for one thing. Always fresh water, not washing in the same filthy water, yuck! It wasnt but maybe 4 months later for our new house that we got our Cabrios. I insisted on them! LOVE LOVE LOVE my Cabrios!!!

All of these awful reviews and you continue to sell the Made in China JUNK!!! And shame on the stores that advertise and sell Whirlpool JUNK!! They should put a warning on these machines stating Will not last, gets off balance and does not clean your clothes. Yes we bought the Cabrio like the others, our clothes would not get clean, because like sheets, would end up looking like a doughnut without a hole and all of the dirty water would drain through the middle and make a spot. Then you have to wash them over and over. But that is not the worse part! It only lasted 13 months, YES I said 13 months just past the warranty LOL!!When the man came to make repairs, it was the gear box and was going to cost almost $600. Almost as much as we paid for the machine. He recommended getting a Speed Queen, we did and I LOVE it!! I think it is the BEST MACHINE I have ever had. They are a little hard to find though, but I found where they were sold on the internet and the dealer had to order it. Well worth the time and trouble, (trouble) which I dont expect to have with this machine. Like I said it is a wonderful beast. And I will never buy another product made by Whirlpool. Before my husband retired he made prototypes for autos so he knows about testing and Whirlpool had to know this product had bad flaws before they put it on the market, I call that fraud. Bad taste in my wallet, Michigan.

After 1 year and 5 months, my old side by side Whirlpool refrigerator stopped working. The melted ice caused floor damage and ceiling damage of the floor under.

I bought an Accubake gas range. I had Whirlpool replace the top sheet metal as it was bowed, cheap & thin. A few days later, they replaced all the brass burner orifices and it all froze and would not turn off. I had to pull the range away from the wall and turn the gas off. The bottom door to the broiler is wide open and it will not close. The stop button for the oven also does not work. This company has been selling these lousy products based on their previous good reputation.

The Whirlpool engineers need to go back to design room sober on this machine. It is only a year old and still I have to run one load two sometimes three times just to get clothes clean. How is this energy-efficient? I have tried all of their so-called remedies. Paying such good money for a lousy and lazy appliance is hard to swallow!

Last year I purchased a Whirlpool washer at the suggestion of a friend who works at Lowes. It was dented and reduced, but my 20 year old Maytag, although still chugging away, was due for replacement. Am I sorry I did! My husband has recently broken his hip and we were caught in Hurricane Matthew just 1 day after I brought him home. We were forced to evacuate. Upon returning with a mountain of laundry, I found my washer lock light blinking although the washer had not been running when we lost power. I tried opening it but could not. I unplugged and reconnected power to no avail. I called customer service only to find we had to wait 2 weeks for a Whirlpool repair person. He arrived yesterday (Oct 26, 2016) and charged $95.00 to tell me this was an almost universal problem with Whirlpools and the company was aware of it. He called this morning to tell me the required part would cost $495.00! The entire washer cost approx. $500. He stated that he thought Whirlpool should have covered the cost as it was not far out of warranty and a known defect, but he could not get Whirlpool to assist financially. I tried calling myself for an explanation of the fact that they knew these machines had a defective part and yet they sold them. I got a song and dance from the rep. Although my husband was unable to help and I am a 65 year old woman, I went out and bought the cheapest machine I could and manhandled it home and connected it. It is afternoon and I am on my 4th load of well overdue laundry, no thanks to Whirlpool. I intend to make this story public through every internet forum I can find. I have a large extended family and friends and I will make sure they do not purchase Whirlpool appliances if they are looking for a good product and good customer service. I will also be sure to never buy a Whirlpool appliance again.

I love this stove! It is nearly perfect. I wish it was easier to clean the glasstop, but I imagine that comes with any glasstop stove. The stove is easy to use, and I love the cooktime option. My only complaint is that the timer is very quiet, and when it is a timer while something is cooking, it only beeps once. If its a timer when nothing is cooking then it will go off repeatedly until you turn off the timer.

Whirlpool fridge with serial # EL2427127 started on fire. Flame started on own but filled entire basement with electrical fire smoke. All terminals on compressor completely melted off. After researching online, I see Im not the first. Unbelievable.

The washer started to show error code for the door and washer would not restart. After removing the top of the washer and checking the door switch to see if there was a loose wire, I traced the wire back to the micro control unit, and upon inspection of the micro control unit, I found that the terminal that the door switch wire was attached to was loose and not making contact with circuit board.Although the washer is out of warranty being 7 years old, this is clearly not a part that is subject to wear and tear. The part was clearly manufactured poorly. I looked on the internet to purchase a new part but it seems that all micro control units are out of stock. This makes me wonder if one should start a class action suit as my part could be one of hundreds that was poorly manufactured. I called Whirlpool to see if they would send me another part to replace the bad unit but they said that because the washer was out of warranty, they could not help.

We bought a Whirlpool Washing machine a couple of years ago. We have been having problems. It does not get the clothes clean and laundry has an odor to it. We bought it at HHGreg by the Dayton mall in Centerville, Ohio and also bought the extended warranty. It was the largest capacity machine they had in Whirlpool so I dont need to mention what we spent for this thing. We have had a service tech out 3 times. The first time he replaced a part. It still didnt fix it. So they were out two other times saying nothing was wrong with it. Not only is it not getting the clothes clean, but is putting lint pieces all over the laundry. The warranty place already said if they come out again and they cannot find out what is wrong, then we would have to pay for the service call. We then went to the store we bought the machine and talked to the manager. We got no help from him. All he did was throw us back to the warranty place. Not to mention, the family is having itching problems with their skin because the clothes are not only not getting clean but the soap is not rinsing out. In other words, we are suppose to eat this expense and move on. This is a new machine!!!!! And all it is worth is taking it to a metal place to scrap out!!!!! We will never buy another Whirlpool product again. It is really **. They don’t back their products up and do the consumer right. There are a lot of complaints online about the same identical thing I am writing about. They should reimburse the people the money that they wasted. Thank you.

We purchased a Whirlpool refrigerator from Conns Appliances on 2/2/12. It worked fine until about 2 months ago. Then it started freezing food in the refrigerator. We called Conns, and they sent a technician to replace the thermostat. A couple of days later, it was still freezing food. So we called Conns again. They sent a second technician. He called Whirlpool tech support, and they told him to adjust the position of the thermostat sensor. A couple of more days went by, and food was still freezing. The problem had gotten even worse.I called the manager at Conns and suggested that we should consider replacement since the previous 2 technicians were unable to solve the problem. He sent a third technician. Tech #3 called Whirlpool tech support and re-adjusted the sensor. He said there wasnt a lot they could do and that if I wanted to get it replaced, I would need to call Whirlpool.I called Whirlpool Customer Service and explained everything that had happened. They told me they would need to send another technician. I asked why, since 3 technicians had already looked at it. She said there were different levels of service and they would have to send someone from their authorized service company, as if Conns is not authorized. I asked if this problem was common in this model of refrigerator. She said she could research that if I could hold, so I said ok. After being on hold for several minutes, she came back and said she couldnt find any record of this being a repetitive problem.I didnt have a thermometer, and I thought if I had more concrete evidence of the problem, then maybe they would replace the refrigerator. So I put a glass of water in the middle of the top shelf. Within 24 hours, it was frozen solid as an ice cube!Technician #4 came and called Whirlpool tech support. This time, they told him that this had been a problem ever since this model came out and they had a fix that had been on the books since day 1. So the customer service lady obviously lied to me. Technician #4 stuffed a piece of Styrofoam in the hole where the air comes from the freezer into the refrigerator and he re-adjusted the thermostat sensor. I asked if we could just replace the unit and be done with it, but he said we had to wait and see if his fix worked.I went to Ace Hardware and bought a refrigerator thermometer. Two days later, we had frozen strawberries, frozen lettuce, frozen milk, and even the meat and cheese were freezing. My thermometer said temperature was 32 degrees. I called Whirlpool back and insisted that they replace the refrigerator. They told me The unit was not authorized for replacement and they needed a 2nd opinion. I was very angry. I told them there had already been 4 opinions and a 5th wasnt necessary. I wasnt getting anywhere, so I asked for a supervisor. They transferred me to someone named Sue. Sue told me the same thing - not authorized, need a 2nd opinion. I told her that I work at The Mens Wearhouse and that if a customer spent that much money on a suit and had trouble with it, they certainly would not have to bring it back 5 times to have it re-tailored. I asked to speak to her supervisor. She said, Sir, my supervisor doesnt speak to consumers. I could not believe my ears. Where would they be without consumers? I was so mad I hung up on her.Later, I realized I had no options and called to request the 2nd opinion. I was told that the technician could authorize the unit for replacement. They also told me I couldnt get a technician for a week because their technicians were all booked up repairing their faulty products. I had no choice but to wait. I moved my thermometer to the bottom of the refrigerator to see if the temperature was the same there as on the top. The temperature there fluctuated between 28 and 34 degrees. I called Conns to tell them the story, thinking maybe they would go to bat for one of their customers. They told me this should never have happened and that the matter should be escalated to their home office and that a manager would contact me within 30 minutes. He never called.Two days after that phone call, I went to Conns to speak to the manager. I told him the whole story and told him that if Whirlpool would not replace the refrigerator, then I would have no choice but to contact Discover (my payment method for the original purchase) and dispute the charges. I pointed out that even though it should be Whirlpool paying for it, his store would take the hit if Discover reversed the charges. He called someone and told me a Conns service manager would contact me within 48 hours.More waiting. Technician #5 came. I told him he was to authorize the unit for replacement. He said he couldnt do that and that Whirlpool tells all their customers that just to get them off the phone. He re-adjusted the temperature sensor and left. I was livid. Now the problem went the other way. The temperature wouldnt go below 50 degrees. We filled an ice chest with food and ice and began living out of it. The Conns service manager called and said he would have to send a technician. This would be #6. I was very angry with the service manager and called Discover to dispute the charges. Discover opened an investigation, sent a letter to Conns (and maybe Whirlpool, Im not sure) and issued a credit to my credit card account.#6 came and re-adjusted the thermostat sensor. The next morning, he called to see how it was doing. The temperature was still around 50 degrees. He wanted to come and adjust it again. I told him to get the unit replaced! So he submitted paperwork to request a replacement. He called back and said that he felt sorry for us because he knew we had a 3-month-old baby in the house. Since the replacement had been requested, Conns wouldnt pay him to come again; but he said he would come on his own time, on his lunch break, and readjust the sensor in hopes that it would get us by while we waited for a replacement. He said it might take 3-4 days to get the replacement. I told him he could come, so this was technical visit #7. He adjusted the sensor. The next day, the temperature was still 50 degrees.I called the service manager at Conns to confirm that they had requested the replacement. He said the paperwork was submitted, that the home office would review it, make a decision, and that we should know something in a couple of days. That was on Wednesday. On Monday afternoon, I called him again. He said the paperwork wasnt submitted to home office until Saturday and that he was expecting to hear from them by end of day Tuesday. In the meantime, we were still living out of an ice chest.I had already determined that Whirlpool wasnt going to help me, and now, Conns was giving me the runaround. That afternoon, I was working on a project at work with a lady who was fairly new in our company. Turns out she used to work at the Conns home office and she knew people in high places there. She called a VP on my behalf. The next morning, I got a call from the VP telling me that I could get a replacement. I dont think I would have gotten my replacement if I hadnt bumped into the lady who used to work at Conns.I called Conns store, and they said a credit had been issued and I could come to the store and pick out whatever I wanted up to the amount of the credit. I knew I didnt want another Whirlpool. The selection was very limited, but I found a Frigidaire that I thought might work. Then they told me I would have to pay extra for an ice maker, even though I had bought the ice maker for the Whirlpool that was being replaced. I argued with the manager until finally he agreed to give me the ice maker, delivery, and installation.Yesterday, Conns called to tell me they were coming in the afternoon to install the refrigerator. They had the audacity to ask me what was the matter with the unit they were replacing! They did come and replace the unit. But wait...Thats not all! This morning, the ice maker had not made any ice, even after running all night long. Conns sent a technician today, and he said all of the parts were not installed and it was preventing proper water flow. He is coming back on Tuesday to install the missing parts. So we still arent done. I dont know if Im more angry with Whirlpool or with Conns. Whirlpool did not honor their warranty and Conns got stuck with it. But then Conns provided poor service too. I got stuck in the middle, and it still isnt fully resolved.

Three years ago, 2008 we purchased a Whirlpool Gold refrigerator for our new house. Since we have had trouble with the ice maker and dispenser, we have had it repaired twice, the latest on Nov 31, 2011. We thought that perhaps it was only our problem. This past summer, we, along with some friends, rented a house in Water Color, Florida for a week. The house cost over $2M to construct and evidently they chose the same refrigerator we did, and guess what? They have the same problem. Just this week we were visiting some friends in Starkville, Mississippi and they had the same refrigerator with the same problems. Evidently this is a design problem and a poor one at that. I would neither buy another Whirlpool product nor would I recommend Whirlpool to anyone. I thought we were getting a quality product given the purchase price of this refrigerator. Indeed that is not the case.

The Whirlpool repairman left today after replacing the burned out motor on my 5 yr old dishwasher bought in Feb 2012 and installed July 2012 as did not arrive from Quebec to Surrey BC until the end of June 2012. So the Finish dishwasher detergent was in the dishwasher as samples and coupons and recommended this Finish for use in the new dishwasher so I stupidly believed them and used it. Well last week my dishwasher stopped working after it started and turns out today the cause was from the Finish dishwasher detergent. I was told today after paying 393 dollars for the repairs. Not to use Finish anymore or I will have the same problem. To only use Cascade. So what is a person suppose to believe.

Never again will I buy a Whirlpool product. I paid over $800 for a new washer 51/2 years ago. I had it worked on twice under extended warranty. Now the bearings are out of the tub and it sounds like a jet taking off when it spins. I had whirlpool products in the past and they lasted for years with no problems. I have a friend who has a relative who is an engineer for whirlpool and his job is to engineer their products so they fail within a certain time frame. They dont want them to last like they use to. They now have gotten their product line to the point where they can tell when it will fail. This is crap. What happened to products that lasted like they use to. NEVER BUY WHIRLPOOL.

I purchased Whirlpool washer in Dec.2017 and used it in winter months only (Nov to March). It kept leaking and had to get appliance repair service for $50 and was told that machine is defective and whirlpool should repair it or replace it. I phoned whirlpool and they told me I have to use their appliance repair shop to evaluate the machine for cost of $130. The inlet valve was leaking and needed replacement for a cost of $253.55 and whirlpool shirked all and any responsibility. Dont buy whirlpool as it is not a good product and service is poor.

I cant believe the list of people here with poor quality of their washing Machine. My first problem was covered under warranty. I have paid for two service visits from A&E and now every 5 minutes get the LF error. My fabric softener does not drain into load either. My only option is repair again and I got a sorry from Whirlpool. I think Im going to look for an old fashion cheap machine as it cant be of worse quality than this Cabrio wtw6400sw1.

I bought a Cabrio three years ago. Unless you wash everything on gentle and turn items with zipper inside out, it puts holes in everything. Then exactly one week after the warranty was up, it started giving an error code. I called the company and was told this was a common error and they would send someone to look at it for $150+. It would likely be another $300-$400 for parts and labor! I had someone else (not Whirlpool) come look at it and they said it was a bad computer that I should just replace the washer, because it would cost more than it was worth. So for two years, we have had to wait exactly 11 minutes for the washer to fault then restart it and repeat 3-6 times. It takes 2.5 hours to complete one cycle. If this is such a common error, why havent they fixed it or recalled the piece of junk?! Because they can make a lot more money this way! Three people I know have Cabrios and all have the same issue and all happened within a month of the warranty expiring. I am starting to think there is some sort of timer that makes it go bad just after the warranty expires on purpose. I will never buy another Whirlpool, Maytag, KitchenAid, Jenn-Air, or Amana (all the same company with different names).

We purchased a brand new Whirlpool refrigerator in December 2012. It is model # WRF989BAM, a French door style with the freezer in the bottom. We have had problems with this refrigerator since a few days after it arrived. The first occurrence was when we arrived home one evening to find water all over the floor, and food thawing out inside the freezer. Everything had to be thrown out or placed in a different refrigerator. I have no idea what that repairman did, but luckily that issue hasnt happened since. Something about the temperature controls. We have also had frost on the back inside panel, and it leaks inside the refrigerator constantly, so bad that we have to keep a large bowl inside to collect the water, and it has to be emptied two or three times a day. We have had two repairmen out to look at that. The first one installed a new filter, which seemed to fix the problem...for about a month until it started leaking again. They tell us these filters must be replaced every 3-6 months...interesting as it says on the refrigerator every 6 months. Regardless, we cant get a filter, or any other parts that the repairmen think it might need because parts take months to arrive. We bought this refrigerator under the recommendation of a technician who came out to repair the refrigerator we were replacing. Buy American he said. They last longer and the parts are easy to get. What a joke!

I bought my Whirlpool induction stove several years ago. We normally use a toaster oven for baking as we are only 2 in our home. Last year I decided to cook a large turkey for the family. I threw the turkey into the oven and started cooking it. After an hour or so I decided to start cooking the potatoes etc on the stovetop portion. My potatoes started cooking and my element shut down. I did everything I could to get it going but finally resorted to the manual to see if there was a suggestion. The suggestion was that the oven had heated the burners too high and that I had to shut off the burners and wait for 5 minutes and try again to use them. The oven was only cooking at 300F. I waited 15 mins to get it running again. The stovetop went out once again and I had to stop cooking. Conversely Ive had the same issue with the oven. Ive been cooking in the oven and have had it shut down as a way to address the stovetop being too hot. How am I suppose to cook on this unit with any kind of confidence? I did an online chat with a rep today and they suggested getting a technician over to the house. I was told I could pay $129 to have them look at it. This is obviously a design flaw that I was never told about prior to my purchase and would never have bought had I known. Shame on Whirlpool!

I purchased Whirlpool dishwasher, model DU930PWSTO, in 9/2007. It quit working in 5/2012. I expected an appliance made by a reputable manufacturer (Whirlpool) to last longer than five years. It seems like a manufacturing racket where they build these things only to be replaced a short time later. With service calls and parts replacement, its cheaper to buy a new unit. Talk about a circle jerk! And who the heck puts anything else but SS screws in a water soaked appliance? Duh. Rust! Im disgusted and dissatisfied with the whole company. Im still waiting on their response to my complaint email; at the time, the machine quit working. Whatever happened to pride in American made products? Or, did this get company bail and were now slaves to the Chinese junk once again? Ill never buy another Whirlpool appliance again. Does anyone have anything good to say about this company? I wish I would have read this blog before purchase.

I bought my Whirlpool Cabrio washer from Lowes in Statesboro GA on 2-14-14. I did purchases an extended warranty on it. After 11 months is when I started to have my problems. I was washing my clothes. I did not hear my beep on my washer. After 2 hours my laundry should have been done. I stopped on the wash cycle and shut off. I put it on the rinse cycle thinking it washed my clothes. It shut off during the rinse cycle. I called the Lowes repair. ** was to come the next day, He did not show up. I had to call again. It took 2 more days before he came out.It takes over 6 business days before I get my part. I have to have my laundry washed else where. It did the same thing again. I called. ** came out. He ordered the other part. It took 7 business days. It came in Tuesday. I tried to wash my daughters comfort on Wednesday. It did the same thing. Shut off during the wash cycle. I called at once. ** was to have been here Thursday. He never showed up. I called Friday. They said hell be there by 5. He still never showed up. I called back today .This time ** called me. He said, “So you tore it up?” I said, “NO it’s still doing the same thing.” He said hell be here tomorrow between 8-12. I am so tired of this washer. I even asked if I could get a replacement. They said no. I said this is stressing me out. I am on anxiety pills already. This is not doing any good. I paid all the money for this washer and it does not work. I have to arrange to have my laundry done some where else. All they said was sorry.This is the worse washer to buy.

We purchased this machine a couple of years ago... What a disappointment! Was recommended to me by the sales person and I trusted her. The machine does not get our clothes clean!!! We are a couple in our 60s so our clothes dont really get dirty most of the time, but they come out with marks on them all the time. My dish clothes and wash clothes are a disgrace! Im continually trying to soak them to try and get them to look clean. Ive been going to write this review for a long time, but today was the final straw. Washed a small load of towels and had to rewash several pieces! I would never recommend a Whirlpool product after this experience.

I purchased a Whirlpool dryer Cabrio (model # WED7300XWO and serial # M03028918), which has had several issues. We had to replace the felt around the dryer tube twice, replaced the dryer tub itself twice, we had the air flow stop, and now the heat has stopped. Thank goodness I purchased an extended warranty, otherwise who knows what these repairs would have cost. I think I got a lemon. I have had multiple repairs, and days of not being able to use our dryer.

Freezer side went out on model# ed5kvexvl00. Fridge is less than 2 yr old. Didnt expect anything to go wrong so quick. The extended warranty, I did not purchase. Replaced relay switch - no changes in problem... Contact them (Whirlpool) and like every else, got nowhere with them. 3 weeks and no fridge... Hopefully the compressor is not bad. Will find out soon. I will be researching before I select new appliances in the future. They need to be ashamed of themselves.

Back in the day GE appliances were made to last and last - the only one I have found close is Whirlpool. They have style, dependability and long lasting products. My washer machine has a ton of features and I didnt pay more for any of them.

I was under the impression Whirlpool washers were good. Mine always goes off balance and quits. I carefully redistribute the load several times to get it to finish (start over). Sometimes it works fine from the get-go, but not often enough. It is now 2 years old and if I were wealthy, Id shove it to the curb. There is little to like with an appliance that often must be adjusted and re-started. I will try Samsung next. It seems that American brands are not reliable. I have no special needs and will consider reliability above all. The name Whirlpool would be a deal breaker for me. I cannot abide my Whirlpool washing machine as it is more of an aggravation than something useful. Stay away from Whirlpool washing machines. They (at least mine) require the load to be balanced to a microgram. Appliances should just work and not require fiddling with.

Frontload Sport Duet ht: After just 8 years, bearing out on washing machine. Just had repairman out. Cost more to fix than what I purchased it for. I bought both the washer and dryer, thus the reason for the duet. So now I have a good dryer and lost its mate. I am not going to purchase another one. Very disappointed. I will not be purchasing any more Whirlpool products in the future. Off to the laundromat.

If 0 stars was an option, I would have chosen that. Ive had my own home for 34 years and have had many washing machines over the years. My Whirlpool Cabrio is absolutely the worst washer I have ever encountered. It doesnt get clothes clean and constantly gets out of balance. Whirlpool did a service call and said it is functioning as designed so I was unable to get a replacement. I really hate being wasteful and adding a huge appliance to a landfill but I will be replacing this machine as soon as it fits into my budget. I dont have a receipt to submit because it was purchased by my builder at my request. Do not buy this machine!

Watery body from all the refrigerator side since 9 – 10 months and complained to Whirlpool 2 months back. They changed the thermostat 2 times but no use. Problem same. Please help. I complained during the last warranty days. Please let me know.

The built-in microwave above the stove was in the home when we bought it seven years ago, so not sure how old it is. Although it had a crack in the door, near the handle, weve had not one problem with the unit. The crack has not opened more, or gotten longer, in the seven years weve been in the home. The unit is easy to clean, and has worked perfectly. It is simple to use, although no directions came with it, it was easy to figure it out.

I am very happy with this dishwasher. It is not a high end, rather middle of the road, but is very quiet, does a great job of cleaning my dishes and pots and pans.

If I fix this washer I will have been on 3 motherboards in the 5 years I have owned this machine. That is inexcusable and indicative of crap quality control and manufacturing process. I should not have to replace the control board at these intervals or, within 5 years, at all. I will never touch another Whirlpool appliance again.

I bought all new Whirlpool appliances. In my opinion Whirlpool has the best product at the best price. I don't buy anything but Whirlpool. My new bottom freezer refrigerator has more room than my previous side by side. The bottom freezer is a great feature and works very well for me. The shelves are adjustable. There is plenty of room in the doors. It has a meat drawer and humidity control vegetable bins. I was worried I wouldn't have enough room for my food but I am happy to report there is plenty of room. The freezer has the pullout shelves and automatic ice maker. It has a great appearance and takes less room than my previous side by side. Overall, it is well worth the price and I am not sorry I bought this refrigerator in the least. It can't be beat.

Love the dishwasher, except the racking which has some top rack channels which are too small to be used by glasses, mugs, etc. The Power On/Off should automatically power down when the cycle is finished. Too often when someone leans against the dishwasher while opening the overhead cupboard, the dishwasher will start up because the unit was not powered down.

I will be brief. Bought Whirlpool ref. model #WRF560Smywo4 on April 15, 2016. The refrigerator quit work July 29, 2016. Called Whirlpool. They responded they had no repairman in our area. After several calls they scheduled a repairman. He came and put on a part. It did not work. Called Whirlpool again. They sent the same repairman. He stated it needed a new compressor. A week later he arrived with the part (August 12, 2016). As of now the refrigerator is working. Now this was two (2) weeks without a refrigerator. This has been a bad experience. I WILL NEVER BUY ANOTHER WHIRLPOOL APPLIANCE AND RECOMMEND THAT YOU DO NOT PURCHASE ONE.

My wife and I purchased our Whirlpool Duet Model # WFW95HEDC 7/19/16. I put my first claim in on 12/19/16. We were sitting downstairs one night watching tv and all of a sudden a noise like the sound of a tractor trailer putting on its jake brake came roaring from upstairs. It was so loud that we both jumped. The machine would periodically vibrate violently while going thru its spin cycle. The frequency started to get closer and closer together. Whirlpool had a technician come to our home. They came out 3 times and said that nothing was wrong. They said that it was vibrating because it was on a pedestal and upstairs on a non solid floor. They also blamed the loose water hose on the noise. SERIOUSLY??? After the 3rd visit, and a week before the 4th visit our machine started to leak. We paid $1,079.00 for this washer and we were having to take our laundry to a laundromat to wash it. The technician came out the 4th time and replaced a cracked drum. Apparently it vibrated so badly that the drum cracked. So everything seemed ok, then WHALAH!!! We wash the clothes and go to move it to the dryer and it is dripping wet. Somehow after they replaced the drum the machine started to not spin the water from the clothes very well. Takes drying the clothes for 50min 2x to get them dry. I am now set to have the appliance company come out for a 5th time and still not corrected. Whats worse is that every time I contact Whirlpool they give me the same canned speech and want to set up another appointment with the appliance company. I am soon at the year mark with my manufacturers warranty and still having issues. I think Whirlpool keeps kicking the can down the road without making good on correcting the issue so they can get past the year mark and make us take it up with Home Depot on our extended service plan. I feel bad for everyone out there who got screwed by this company.

We purchased a Whirlpool Cabrio model # WTW6400SW3 in 04/08. Approx. 6 months ago, the washer started to be un-level during the spin cycle. This has progressively become worse, it now becomes un-level during the rinse cycle. We spoke with the appliance store where we purchased it, ;hey said the repairs could cost $400 or more. Thats nearly half of what it cost new. Like other complaints Ive read, cheaper washers have lasted years longer than the Whirlpool. Our last washer, a Kenmore, lasted 15 years.

Just plain terrible. Purchased Whirlpool Gold Seris Dishwasher Model w10698637a in June and now its been 3 attempts so far to fix a brand new dishwasher that does not clean. So far I have been asked... have you been heating the water before you start the cycle?, my favorite... Is this a whirlpool dishwasher. So I find out today that it will take another visit from a company that hasnt been able to fix it, plus a call to the tech line to make sure they havent missed anything. Heres what Ive missed, a dishwasher that cleans.

Whirlpool Cabrio - Clothes come out of the washer wrinkled, twisted and soap stained. I use the exact soap products they recommend in the proper amounts. Bought them in September of 2014. Wish I could return them. Too low of a water level that cannot be adjusted. Not fully rinsing the soap out of the clothes. Washing takes twice as long as with my former 25 year old washer. Dryer is new technology and energy efficient yet wont remove wrinkles from permanent press clothes.Uses hardly any water so clothes must be rinsed at least one or two times to get the soap spots off. Clothes always come out extremely wrinkled. Not all items can be put in the dryer so ironing is back in my life again. Some items come out so twisted and wrinkled that ironing wont even help. Dryer isnt much better at all and shirts and pants always have some wrinkles. Have had to bring some items to the dry cleaners to bring them back to a non wrinkled state. Whatever is saved in water and energy is more than made up by ironing and dry cleaning. The company representatives have sent service people out twice and they both said that the machines are performing as they were intended to. I do smaller washes and wash more often to try to get better results. I dont. Even though it is extra large capacity items such as blankets must be washed more than once as the water does not wet the entire blanket.

My 50 Gallon water heater is still under warranty, model #051718153. The water heater shuts down after a few minutes. Theres a sound of a leak inside the tank. They would not replace the tank; theyd only replace parts. We have already replaced the outer control box and the double burner, and theres nothing else to replace except the tank, which they refuse to do so. If I had called them and said theres water coming out from the heater, theyd have agreed to send me a new tank, but honesty doesnt work.