I bought a Whirlpool Gold refrigerator four years ago, June 2012. Today, 9/20/16, I found out that the ice maker has to be replaced to the tune of $350! The repair person told me that Whirlpool has the worst track record, and of his service calls, he has at least three to five Whirlpool refrigerators per week! This is a terrible lack of quality. When youre spending over $2,000 for a refrigerator, you expect it to work for more than four years. Not only that, but I have e-mailed Whirlpool Customer Service twice and have been ignored completely. This is my last Whirlpool product, and I urge you to stay away from them. Samsung has a much better track record.

Mine is a stacked unit...saves space and I just love the stooping over factor... BUT, its an energy saver and I always have to add about 5 gallons of water to it for it to cover even half a normal load...ugh!!!

Just like so many on this site Bought Whirlpool Model #WRF990SLAM02 refrigerator new in 7/2013. Just went on vacation for 2 weeks, I come back and the freezer and ice maker are not working. If what everyone on here are saying is true then it looks like I too will have to purchase a new refrigerator and you can bet it wont be a Whirlpool.

This diswasher is streamlined and elegantly desiged for any kitchen. It stays externally clean with easy to wipe surfaces. Easy to use controls on the top of the door that cannot be accidentally hit when walking by the item. Plenty of internal space for lots of dishes. Internal silverware rack is easily removalble and not in the way of dishes. It is extremely quiet when running, like a soft hum in the air. A real "bang for your buck".

We have had our Cabrio for one year now and we found the agitation cycle to be loud but we have gotten used to it now. The thing we cannot get used to is the sour smell permeating from it. It smells like a dirty mop. Our washer and dryer are in a small laundry room so when we enter it to get to the garage or bathroom, the smell hits you like a ton of bricks. Stinky!!

I bought it a year ago and the warranty is not even up and only in about a month the freezer door handle keeps falling off then the stainless steel which probably is fake is rusting too. They replace the handle and the door and the handle still keeps falling off and the doors are rusting again. My GE stainless steel dishwasher and stove are five years old and there is no rust on them. Whirlpool says it is cosmetic and that its not covered under the year warranty. I will never buy Whirlpool again. Awful customer service!

We purchased a Whirlpool upright frost-less freezer (model # EVL201NXRQ05) in October of 2008. So, you see, it is not even four years old. A few months ago I noticed that some things in the freezer were very soft. I looked at the back of the freezer and there was some ice buildup around the area where the coils are located. I took everything out of the freezer and removed the panel over the coils. There was major ice buildup on the coils. I completely defrosted it and dried it out. I restarted it and it seemed to be working okay. But a few days ago, when I got something from the top shelf of the freezer, it was not even frozen. So, here I go again. I removed everything from the freezer and have defrosted it again. However, this time, as soon as I turned it back on, the ice started building up on the coils immediately. It is impossible to contact anyone at Whirlpool that gives a crap. We have also been having problems with our Whirlpool Gold refrigerator. We have spent over $250 on it and it still is not working properly. I would love to just throw them in a ravine, but we have spent a lot of money on these appliances. We thought that Whirlpool was supposed to be number one in appliances. What a huge mistake we have made and it is costing us dearly.

My 79 year old grandmother hasnt used her Whirlpool washer in 5 months because of defects that Whirlpool USA thinks they are going to fix. Really??? How long is she going to go without being able to use her washer that she bought from your company? Is it going to take a year? 5 months!!!! I should be billing you for all of the out service of laundry we are having to pay for because of this inconvenience. I have never experienced worse customer service and more of a waste of my time and my dad’s time. I hate posting this but the only other option is therapy for my family from dealing with this insane issue.

This was the first new appliance that I had actually ever had and I purchased it in October of 2010. After four months, it started make a grinding sound. I called Whirlpool and the repair man replaced the motor. Approximately four months after that, the lid got stuck and the machine would not respond. Same routine as before, but this time the transmission was replaced. While the machine was apart, I noticed the white insulating panel from the bottom was brown in a spot and looked as if it had gotten hot. A month before the 1 year warranty expired, the washer started making an intermittent grinding sound nearly identical to the sound made when the motor went out. This time a different service company was sent out my Whirlpool and the said that nothing was wrong. Now, the machine is out of warranty and has stopped cleaning close and during the spin cycle the you can hear water running into the machine constantly. Last months water bill shows a 40% increase in water consumption when nothing has changed to incur a larger bill. Seeing all these comments makes me wonder why the heck nothing is being done to force recalls on such poor products. Consumers should be treated with a lot more respect than this. I will never recommend a Whirlpool product to anyone I meet. In fact, I will strongly discourage anyone who is contemplating buying a Whirlpool washer machine.

I like the experience of the microwave. Especially because it’s mounted in the wall and easily accessible. User-friendly, easy to use, and pretty self-explanatory. It’s very easy to clean which is something my wife really loves knowing we both are working professionals.

We are so disappointed in the purchase of this machine! It doesnt put enough water in the machine to clean the clothes, and the spin cycle has continuously gotten louder and louder to the point I think its going to explode when it spins! Is there any recourse we have or any recalls on this machine?? Thank you for your help!!!

I purchased this stove in September and I am very unhappy with the Aqualift. The service department said I would have to probably do the cleaning process about 7-8 times for it to really work. I find that very unacceptable would never recommend this to anyone.

Bought this washer and dryer on sale at HD. The washer hasnt worked from the beginning. The clothes dont get wet because its an HE. I have to add buckets of water to even get the clothes wet enough to wash. The clothes come out with a residue on them. We use liquid HE detergent. It appears Im having the same problem as the majority of posters here. I will NEVER buy another Whirlpool appliance. There should be a class action suit to get Whirlpool to respond.

Special features eg changing HE detergent conc. ratio for auto add feature in Load and Go is impossible to find, extra rinse doesnt work. No extra spin which would be useful for bulky loads. But preset cycles work fine and machine has very low vibration a big plus.

1st range arrived in June and would not heat to temperature. Sensor and control panel replaced. After 3 techs Whirlpool agreed to replace in September. 6 weeks later new range arrives. Protective film stuck to the lettering and when you try to remove it the lettering comes off. Chunk of enamel missing off inside oven door and defect in the glass cook top. Fast forward to today. THIRD range delivered. Same issue with the protective film and gouge in chalking around cooktop. Leons has been fantastic. They are replacing it with an entire new brand!

If you are on this website, keep reading. You will definitely find many people that have your same problem. We purchased our refrigerator 5 years ago. Since then we have had a leak inside of it which is gradually forming mold that I have to cleanup. The ice maker and water dispenser do not function for months at a time. I just purchased 2 drawers for the same reason as the review on May 5, 2016. The tabs break off of the front panels and the panel falls off of the drawers. Theres no way to pull them out. We paid over $200.00 for two drawers!I spoke with customer service at Whirlpool and read them the 2016 review. Their answer was that you should not believe everything you read. My answer was, How cant I? Its happening to the refrigerator I own. They just kept giving robotic answers. The conversation was that of someone that is in denial of having a problem. They dont care. Instead of at least offering a discount on the drawers, she offered me an over $400.00 one year warranty. Pathetic! Whirlpool has just lost another customer.

Purchased 03/28/13. Refrigerator 62 degrees on July 4, 2013. Called for service July 5 - came out July 9 and told unrepairable - wiring harness set against tubing rusted and broke wires. Since July 9, I have been trying to get my replacement from Whirlpool and always told they will call me 24-48 hours - never calls. Asked for supervisor on July 22, then asked for her name and direct number. Supervisor said someone would call me about delivery. Supervisor told me if a local store would have had in stock, they would have sent it out from there (called local store and was told 6 were in stock and could be delivered tomorrow). Tried to call supervisor back to inform her, but number would not go through (apparently bogus number). As of July 22, 2013, still no refrigerator. Very poor customer service/service repair. July 24 - asked if I needed to get an attorney and/or contact local new consumer advocate - Whirlpool said they would issue a refund check for the refrigerator, and that I should receive it in 14-21 business days - said they could not refund on credit card I used to make original purchase. Hopefully, the check will arrive.

We purchased a new Whirlpool Cabrio Platinum W10405142B washer and dryer just over 3 years ago. We decided to go back to the top load as we were having so many issues with odor from our front load. We purchased the set at a Sears store in Timmins Ontario and we’re quite confident that we were getting an excellent product. From day 1 we have had issues with having to rewash our clothes. We have lint and white streaks on the clothes as if we were using powdered detergent and they are all tangled. We have always used HE liquid and at one point I switched to soap nuts to get rid of using chemicals. We have now changed to pods and still have issues. When the washer is spinning it is deafening. You can hear it outside for goodness sakes. It sounds like it is about to take off and fly.The cycles are ridiculously long. For a quick cycle the other day and a very small load it took 72 minutes... how is that quick? When the wash is done my clothes are all tangled up and are stretching things out of shape. I am careful what goes in my washer and how large my load is. I know not to wash sheets or towels when I am not home as they will eventually be unbalanced and have Sat all day in the washer only to have another hour of washing when I get home. We are currently doing some work in our home and pulled out the washer. The floor has a rust circle from God knows what. I will attach a picture. The lid not longer closes. I have to hold it down until it locks and it still pops up a wee bit.I do not understand why I am responsible for purchasing a new set when the product I bought should have lasted and not caused damage to my clothes or my flooring. How do we as consumers make the manufacturers responsible for things like this. If nothing else the appliances should be removed from my home by the Company and I should be reimbursed for damages and the cost of a new set. I will continue to look for my receipt as I keep everything and I am unsure what is meant by order #.

Ive never considered writing a complaint before, but feel it is necessary in this situation. I have had my Whirlpool refrigerator since November, 2007. It has worked great until this past April when the freezer began to overfreeze, cause frost and ice to build up. I have had Whirlpool Factory Service out to repair the unit twice a month since April with still no resolution and the appointments are getting harder and harder to get someone to come out in a timely fashion. I called on September 1st and the closet appointment is September 15th. They werent even able to book the appointment when I called. I was told someone would call back within 3/4 days. When I didnt hear back today, I called to find out an appointment was set.Ive called the Resolution Team to obtain back records of service but havent been successful in receiving a phone call or email. I havent received all of the follow up emails after service which is frustrating since there have been two technicians that have come out for repair and were not provided any history on the unit. If I had the follow up emails, I would be able to share that information with them.I contacted Customer Service to find out what I can do in regards to the issue I am having and was told its best to stay with the service provider that I began with since they are familiar with the issue. I would imagine if they are familiar with the issue that it should have been fixed by now. Ive also sent a response card back to Whirlpool Home Appliances at the Survey Response Center and havent heard anything from them either. When I called to follow up there wasnt anyone that could point me in the right direction to obtain answers. They were able to provide me with the mailing address for Consumer Affairs though. Ive been told numerous times that if it gets to a point it costs too much to fix they will replace the unit. Im not sure when that decision is made. I have an extended contract and will extend it again in October when it expires. I just want the unit fixed or replaced. Its been since April with the same issue. Very disappointed consumer.

My new Washing machine was to be energy efficient. Yes, It uses less water to wash a load of clothes. Problem is, it takes twice as long to wash a load of clothes as older models. If it uses twice as much electricity, In what universe can this be considered energy efficient?

We purchased a new home 6 weeks ago that was furnished with new Whirlpool appliances. The stove worked great however the oven never worked at any time. The appliance sales person advised that we had to go through Whirlpool for repair on a brand new appliance. To date we have had to stay home 2 days and the range is still not working and third service call is now scheduled. A call to Whirlpool ended with them advising that we do not qualify for a replacement range, even though it never worked. We have been without an oven for 6 weeks now which is totally unacceptable. I would never buy another Whirlpool product or recommend them based on this current experience. We paid for a new product that never worked and they will not replace it. Hopefully they can repair it on the third visit. Unfortunately I have lost faith in this product and this company.

Weve had this washer for about 9 months now. We noticed that the loads being washed small or large werent coming out clean. When wash cycle finished items were covered in soap residue and or had large dry spots where water had never touched the area. When our sheets were washed in bulky/sheet cycle and deep water this happened. Maytag sent out repair person to find the water pump went bad, pump was replaced. After repair same bad washing results as stated previously. Maytag then sent out repair person for the second time. This time the main electrical board was replaced. Still after two repairs wash loads are still coming out dirty, soapy, dry in spots in any of the selected wash cycles large or small. Third call to Maytag and a third scheduled repair date coming up in a few day. Over the phone the Maytag employee only words of wisdom was, Did you buy the extended warranty. So unless there is a third failure I believe that this washer is just a poor design.

I bought a Whirlpool refrigerator, model # wrt779reyb00 with serial # vs13537798. The icemaker quit working and then water started leaking out from the door. A&E serviceman came out to repair and said we needed a new door. It had been over 11 weeks and the door still has not arrived and we have been told it could be as late as November. When I purchased an item, I expect it to work and if not, to be repaired within a reasonable time or be replaced. I have called and been told that replacement is not an option and that I will just have to wait. This is unacceptable. I purchased this refrigerator with water in the door and an icemaker and I expect it to work.

We purchased a higher end cabrio model only 3 years ago. Last year, on about every 5th cycle, the load would not spin at the end. Id have to remove all the wet clothes, set it to drain and spin, start it and wait for it to hopefully kick in. When I do it right, it kicks into the spin mode. I had to quickly press start/stop to unlock the hatch and reload the soaking wet clothes and wait for it to spin properly. Yesterday the same thing happened again. This time, it did not kick in. I ended up flipping the washer over and taking a look underneath. I discovered that the motor was seized. It had lost all its lubricating oil and smoked the belt. Now, my 3 year old washer is sitting in the driveway awaiting a trip to the dump since I got fed up and went out and purchased a new Samsung top loader. I emailed and called whirlpool with no luck. Not impressed. When I went out to buy a washer today the first thing I told the salesman was to stick anything with the name whirlpool out in the trash bin out back.

We have these appliances in our apartment. Its a gas range with a microwave over the hood. We did have the microwave replace a year ago, we have been here for 5.5 years. Its a good stove, we would consider buying one for ourselves.

I bought the WTW4815EW0 Whirlpool washer. Worse machine ever! It’s take forever to wash a load, there’s no way it’s efficient when it takes twice as long to wash one load. It doesn’t sense the water level correctly, Its noisy, and after only having it 3 years it crashed on me. I refuse to waste money fixing the piece of junk and when I go to purchase a new one it won’t be a Whirlpool.

I purchased model #GI7FVCXWY01, SERIAL #KY4234335, and it arrived in Jan 2010. It is now going in the trash! Two repair companies came out and both told me the ice maker had issued a recall, but in reality, Whirlpool told me to buy the replacement part for $348.73 to fix their poor design! I called the 1-866-698-2538 customer service and so sorry is all you get! By the way, neither of the repair were willing to install the replacement part, as it takes too long to install and these compressors are never the same after the ice maker has these issues! Both repairmen said to trash the refrigerator. How sad that a $2500 refrigerator only last from Jan 2010 until June 1, 2014!!! I will never buy a Whirlpool anything!

I bought a Whirlpool built washing machine on Jan. 8, 14. It stopped working on Aug. 9, 14. It is now Sept. 2, 14 and I am still waiting for it to be repaired. I am age 75 and it is difficult to load and unload clothes to take them to the laundry. The repairman order a part Aug. 26. Pony Express has not deliver the part at this time.

Whirlpool Duet Front Loading Washer. Purchased date was 1/09/10 and I paid $629.00. It failed in 7/1/11 and got a service call for $60.00. The result of service call: Bearing shot and crank shaft broke. Im very disappointed. Whirlpool should be liable for the malfunction of their product. Whirlpool was contacted and they were sorry that there is nothing they can do.

I ordered a washer dryer combination through Whirlpool. I was given a delivery date 2 weeks out. Whirlpool employees must be doing their laundry very sparingly if they think that this would not put a strain on a household. But I was willing to wait. I asked the date and they wouldnt give it to me. A week later they called with the date and I asked the time. Again they wouldnt give it to me. However they said they would give me the time the night before. They then called with the time, which was during work hours. I told them I would be unable to do this during work hours and they gave me the only other optional date, also during work hours. I finally agreed and took a 1/2 personal day. When I arrived home. I received a phone call from Whirlpool that they will not be delivering my washer/dryer unit at all and to pick a different date. I canceled altogether.UPDATED ON 02/24/2016: I have worked hard to not get upset at companies. However I feel that this is an especially poor company and I cant remain silent anymore. I bought a Duet Washer and dryer over the phone with Whirlpool. It took 3.5 weeks for it to get delivered because Whirlpool kept cancelling. Each time, I took a 1/2 personal day so that I could meet the delivery people within their 4-hour window frame. On the 3rd attempt, they were finally delivered and set up by the delivery men.During the 2nd time I ever used the product, it stopped working, making a horrible grinding noise. I had to unplug the machine. My husband came home and hes pretty handy. However he was unable to even press 1 button. I had a friend in the repair business come the next day and he was unable to repair it. I called Whirlpool again and they said theyd have a repairman out the next day. They outsourced the job to a local company and Whirlpool sent me a confirmation email with a time and date. Again I took a 1/2 personal day. After hearing from no one, I called the repair company. They said they had no record of me in the system. I cried.I called Whirlpool and was put on hold for 3 hours. I hung up and called again. They said my department closed 8 minutes ago and they couldnt take my call. I asked how that could happen considering you began the call 3 hours before that time and would have stayed on hold until I died had I not decided to hang up and try again. Every time previous to this I had been on hold for a minimum of 1 hour.I have been trying to return the product. They tell me that Im unable to because my product is functional. I told them it was in fact not functional, which was about the 3rd time I said this, and they said Ill have to call back 1st thing in the morning. I told them I cant risk any more work time to deal with this poor company. So they put me on hold again and thats where I remain. I am currently going on 27 minutes.

Purchased a double wall oven and had it for 13 months. Used it this past Christmas and for the first time used the self cleaning mode. After an hour the power went out and now the oven is dead. Whirlpool service sent me to a local repair company and they want $70 to come out and look at the oven. This seems like a huge problem based on all of the feedback on the web. This is an obvious lemon and Im going to talk all over social media about the poor quality of this product.

LED Freezer Lamp stopped after eight months, $14, not covered under warranty. OEM water filters are costly. Icemaker is noisy, ice dispenser chute clogs. When refrigerator was set at 38-40 degrees the eggs and most top and middle shelf items partially froze. Noisy compressor. Good price from Home Depot sale in Nov. 2019.

In 2008 I bought a Whirlpool range from Lowes. About a year ago I began to notice an electrical smell when I would use the oven. I called the repairman in October and he had to replace wires that had melted. The first time using the oven blew a fuse. Repairman came back replaced everything for free and it has worked fine since October. 2 days ago the fuse blew again. When I flipped the breaker in order to use the cooktop there was an arc flash which blew a hole through the back of the panel on the stove where the cord is hooked to the stove and a hole burned in my wall. After reading Whirlpools fan mail I see that there are severe issues with the quality of Whirlpool products. It is a sad day when the names we have come to trust are more concerned with the bottom dollar than with customer satisfaction with their product.

I just love the durability of my machine and the features that it offers. It does a great job washing my clothes and I feel like its a solid appliance that lasts for many years and its good quality for the price.

WOW!!! After reading all of these reviews Im wondering why I didnt see these sooner before I bought my POS Whirlpool fridge! Had our fridge a little less than 2 years and the freezer just does not keep anything cold anymore. Stopped making ice and everything in the freezer started to defrost. We noticed this one day when our ice cream was runny... Yuck! So we looked around online for troubleshooting. We took out the drawers and the back panel... There was a huge chunk of ice right before the coils. The coils themselves were not frosty and we thought that might be a problem, but we didnt know. So we thought this might be the problem. So we took a hairdryer and melted the big chunk of ice. After we did that we then noticed the coils started getting frosty again but not consistently or evenly across all of the coils. I dont know if this is good or not??? So now Im going to purchase a thermometer and see if the actual inside of the freezer is getting up to the correct temp. After reading all of these reviews on here Im thinking Im screwed!!! We also called Whirlpool and they basically said... oh well not our problem. WHAT A ** COMPANY! I will never buy another Whirlpool product again... Even if they offered me a free one I dont think I would take it.

My husband and I purchased a Gold Series, French Door refrigerator/freezer in 2012. Everything was fine until our icemaker took a dump a few weeks ago. It had to be replaced. Taking time off from work to meet the repairman with that repair was an inconvenience but it was only magnified when we were told he would call us an hour before the repair, which never happened. We were given the usual 4 to 5 hour window in which we could expect a service call, which is the standard these days. But I had to rush home when he called because we never got that courtesy call an hour before. The repair, as frustrating as the situation was, was made and we thought that would be end of that for a while.Things were fine until today when I discovered puddles of water on our wood floor as I was leaving for work. While mopping things up with a paper towel and trying to determine what the problem was, I discovered a frozen puddle of ice on the floor of the freezer when I pulled it out. This situation, obviously, was more urgent than the last one we had a few weeks prior so we were hoping for a bit more than the Well have someone come out on the 20th response I was given. It was only after jumping through hoops like a trained monkey at the circus and raising my voice a few times out of frustration, did we get a call from the actual repairman who said he would be out within a couple of hours.By his own admission, the small rubber seal the repairman replaced somewhere in the refrigerator, was known by the manufacturer to be an inferior part. He told us they are well aware of the problems caused by this inferior seal and that they eventually need to be replaced with one that is of better quality. Apparently, its cheaper for them to use the inferior one, and they choose to disregard the inconvenience, not to mention the potential damage that could be caused to a persons home because of it.We have a great many concerns on a great many levels surrounding this product and the way we were treated as paying, extended warranty consumers. This refrigerator was a major purchase for us. We placed our confidence in a company and a product we thought we could trust; not to mention making the assumption that if we paid good money for an extended warranty, a problem like this most recent one would meet with more of an eager attempt at getting us the help we needed without having to become as insistent and frustrated as we were forced to be.How disappointing to discover that spending over $2,000 on a major purchase like this and then being told we would have to wait 3 to 5 days for a repair. Having to take time off from work, or being told to wait for up to 5 days for any sort of help to replace a small rubber seal, known to be of inferior quality, that was replaced in 10 minutes is absurd. Think twice before spending hard-earned money on this product!! The tragic lesson, however, in all of this is the verbal confirmation by the repairman that just about all manufacturers are the same when it comes to corporations trying to save $$$ and blowing off the inconvenience and expense of their customers.

If everyone would submit their complains to Whirlpool, they might do something about this. Submit your complaint to ALL of the followings emails: investor_relations@whirlpool.com media@whirlpool.com whirlpool_customerexperience@whirlpool.com B2Bdevelopment@whirlpool.com. Here is what I wrote to Whirlpool: Model: WTW7800XWO, Serial number: C02670320. I purchased the 4.6 Cu. Ft. Cabrio Platinum Top Load Washer in June 2010. The washer lid has broken 3 times now. Its snapping by the hinges. I have been charged about $300 per lid. I believe the hinges are not durable enough to support the weight of the glass lid. I have read hundreds of reviews regarding the same model and issues, I also have a friend who has the same model and is experiencing the same issues and has had to replace the lid twice now. Im disappointed that Whirlpool has not taken accountability for this and either issue a recall or replace the lid at no charge to the customer. If there has been so many complaints, why hasnt Whirlpool taken action on this? I am requesting that the Whirlpool Headquarters address this issue immediately.When I called customer service to complain about this issue, the rep informed me that they have never heard about this issue before. From all the reviews I have read online, it seems that customer service is telling them the same thing. By not addressing this defect, Whirlpool will lose thousands of customers. This is not the way to retain or have returning customers. This is the first time I have purchased a Whirlpool appliance. I will not be a returning customer if this matter is not resolved.

Purchased a self-cleaning Whirlpool oven - model number RBS245PRS06 at Home Depot. Spent extra for the self-cleaning feature. The oven had slight use and used maybe once a week. Cooked a big Thanksgiving meal and decided it was time to use the self-clean feature for the first time. One hour into the process the oven shuts off, no longer has power, and the oven door is locked and will not open. Called Whirlpool (talked to 2 levels of customer service), they wanted me to buy a $200+ warranty for another year of coverage!Researched online and talked to the parts people and this is a KNOWN defect. It happens frequently when using the self-clean feature. It requires replacing the Thermal Overload Safety Thermostat which costs $45 with shipping for the part. The service call is over $100 PLUS labor which can run even more. There are YouTube videos that show how to replace this fuse. The parts lady recommended NOT using the self-cleaning for this oven. Buyer beware. If you are in the market for a new oven do not consider this Whirlpool model. THIS PRODUCT IS DEFECTIVE AND WHIRLPOOL WILL NOT STAND BEHIND IT ONCE YOUR 12 MONTHS IS UP.

This machine is 18 months old. First it failed to drain (LD code). Ran diagnostics and found the drain pump ($60) failed. The Mexican part was replaced with an Italian part. Two weeks later, the infamous F1 code flashed - control board. I sourced a new one. I ran one load and another F1 code is flashing. These are $150 electronic parts. Fuhgetaboutit. Im sending this ** to the dump and going back to electromechanical controls. I had a Maytag that lasted 15 years.

We purchased the Whirlpool Double Oven Range model GGG388LXS in April of 2011. The reason we purchased the oven is that we are empty nesters. We almost exclusively use the small top oven. We have streaks between the double glass on the bottom oven. We can not clean it. It is obviously a design flaw. I looked on this site to see if others have the same problem as it is too early to talk to customer service at Whirlpool. How have others fared with this obvious flaw?

I purchased dishwasher model #GU2800XTVT0 in May of 2009. Today, it leaked water all over and damaged my floor. My husband pulled the dishwasher out of the cabinet and found that the motor had fallen off. It did not have a bracket to hold it in place and worked loose, which then disconnected a hose. I called the customer service but they wont do anything because it is beyond the 12 month warranty. It only lasted slightly more than two years. This is obviously a manufacturing defect and we were just unlucky enough that it failed after the warranty had expired. The most ironic thing is that my husband worked for Whirlpool for 20 years. There is no loyalty here.

I bought a HD Whirlpool in April 2011 and I hate the machine. It does not use enough water to wash clothes. I open the lid every wash and cannot believe Whirlpool can label this as a washing machine; it spits a little water now and then. I am demanding Lowes and Whirlpool to replace the washer. I have used two Kenmore washer for 45 years and I never had any problems. I use hot water to kill germs -- well there is not enough water to drown a fly. How can these manufacturers sell such product and then give the consumer such a hard time when they ask for help. Dark clothes have white residue stuff all over them. I have to hand-wash a lot of my clothes. I have never in 45 years had to do this. I am so mad that Whirlpool is taking everyone for suckers. Now I am sure that there are a lot of people who just never take the time to complain; too much trouble and just go buy another brand of machine. We consumers need to demand that manufacturers sell quality products.

I purchase a suite of Whirlpool Kitchen Appliances April 2017. My range is the slide in model. The knobs are on the front of the stove top. I 4 months in I saw that the paint behind the plastic panel where the knobs are was chipping. Also, the gasket in the oven had some loose threads so I finally decided to call the warranty. Whirlpool paid for the gasket to be replaced but Customer service said the chipping was cosmetic and that only covered for 30 days. I am so disappointed in this range and Whirlpool. My stove looks very used after 10 months. I followed the instructions on what to clean it with and how to clean so I know its not me. The paint chipping is crazy! How as consumers do we deal with this? This Range was a cost over $2000! and they give me touch-up paint!I purchased Whirlpool because I researched prior to purchasing my appliances. I thought I was buying Quality, this is not quality! At Christmas I had a pot of potatoes boil over and the element circle on the glass top cam off with cleaning. This too is not covered because its cosmetic. Ironically, my old glass top Whirlpool range did the same thing. That why I got a new one! I guess it still works. Who cares how it looks... RIGHT? Well, I WAS a good Whirlpool customer. Not anymore! Do not purchase Whirlpool glass top ranges unless you want it to look worn out after less than one year. I have tried to post pictures but this wont let me paste them!

I purchased a new high-efficiency front load Duet HT Whirlpool washing machine (WFW9200SQ02) in January of 2008 for nearly $1000. I dealt with the mold issues and permeating smell for all these years, but the machine failed catastrophically this month - after just over 3 years - on a $1000 machine! The rear bearing went out. The parts alone are nearly $500 and the labor is estimated to take 3-4 hours by a trained technician. We are talking about an $800 repair --more than a new machine would cost. The most disconcerting part is to see how often this is happening. It is commonplace. The bearings go out on these things, sometimes after only a year or two, sometimes after 3 or 4; but it is very rare to have any machine go longer than 6-7 years. Whirlpool wont do anything. The best chance is forcing a recall related to the class action lawsuits pending about the mold issues, but by that time, how many people will still have their machines?

I thought the Calypso had issues until I got the Cabrio. It does not use enough water to get the clothes clean, it leaves them in a tangled mess, and no matter how carefully I load the clothes it is always off-balance making enough noise to wake the dead!

Whirlpool WMH53520CSO Microwave oven purchased Aug 2014 - The light and fan will not go off when door is shut and not being used. The microwave gets really hot and afraid it will start a fire. I now keep it unplugged and trying to troubleshoot the problem. Not sure if it is worth a repair. Paid $347 2 years ago.

Refrigerator caught fire - I own a 2003 Whirlpool Gold side-by-side refrigerator that I bought new from Lowes in 2003. On Friday, July 13, 2012, I woke up to the smell of burning wires. I called 911 and they sent out a fire engine. While waiting for the firemen to arrive, my neighbor came to help me determine where the smell was coming from. Within seconds, we heard loud clicks and a huge cloud of gray smoke came out from behind the refrigerator. The firemen arrived, entered the house, unplugged the refrigerator and told me that the smoke and smell was coming from behind the fridge.

Purchased heavy duty dual steam washer and dryer in 2008. Recently got some error codes that we could not fix. Had one service company come in and they could not figure it out. Had a certified Whirlpool company come in and they could not figure it out. They called Whirlpool technicians and they were even unsure of what is wrong. Said they could keep ordering parts and trying them to fix the problem. And of course I would be responsible for the parts. And no guarantee it would be solve the problem. Called Whirlpool direct, to no satisfaction. They said they could send the same company out and have them call the tech line while on site and try to troubleshoot the problem. However, would have to wait another 3 days to get him out. Been a week without washer. I have had washers bought previously last over 10 years without any problems. If these machines are breaking or control boards are going out after about 4 years, then Whirlpool has a bigger problem. Whirlpool supervisor was only offering to maybe a discount on the parts needed, without even knowing if they could fix the problem. Seems to me like they really dont care. Very dissatisfied, will definitely not recommend this product to anyone. And if it ever gets fixed, I am going to sell them immediately.

I bought a whirlpool microwave on August 8th. The microwave was missing parts. I called whirlpool. They said they were sending me the parts, mind you this was not a floor model. So 2 weeks later pass I received no bracket No screws. I called whirlpool oh yes we got the address wrong. Resent it, just one screw no bracket and I needed 2 screws. I called again oh yes we did get the order for the bracket too but you have to pay $7. I said ok no problem. Can you do fast shipping? They said sure. I called Monday August 25th. They said I should receive it by Wednesday August 27th. I had to pay extra for the shipping. Here I am September 2nd w/ no bracket. Called again. They said it wasnt next day shipping, it was 2 day shipping and its at the post office. But the shipping number they gave me was for the one screw. I believe I should get my money back. I spoke to a supervisor, took her number down. Still waiting for a call because the mailman came and I didnt receive anything yet again.

I purchased this Whirlpool washer (model WTW7600XW2) on October 2011. Fabric softener dispenser is full of water at end of cycle. Repairman has replaced parts three times, but the problem is still not corrected. Today, I talked with a Whirlpool supervisor. She says this is normal. She told me to take the cup out and empty it. The cup is not removable, so she said I could blot it out with a cloth or sponge. I paid $800.00 for a washer with an automatic fabric dispenser that I must empty manually. I have used whirlpool appliances for 50 years of marriage, but this is my last one. I am very disappointed with customer service.

I bought this Whirlpool Cabrio washer three and 1/2 years ago and the assembly which is basically the transmission and the assembly which is the agitator is out! Needs replaced! This is complete crap! The new parts will costs over $500 bucks plus labor! Ridiculous! My last washer which was a Maytag lasted me 20 years! What a piece of junk! Now I have to. It a new washer! No thanks to you Whirlpool! I will never buy another Whirlpool appliance again! Neither will my family or friends!

This product is unsafe and should be recalled. It has aluminium wires that connect the unit to the 220 Vol Power source. Aluminium and copper wire dont mix. I took a shower and was getting ready to leave for the day when I went into my garage to smell burning plastic and wires. I traced it to the hot water heater and discovered the wires in the Energy Smart were melted and burned. I checked with Two Electricians who told me that the wires in the unit can not handle the high heat and melt. If you have one get rid of it. Had I left for the day I would have lost my home, cars and pets. If anyone would like to see this unit I still have it and photos.

The Whirlpool hot water heater model ES80H123-45D from Lowe’s is a free replacement for a lifetime warranty unit that went bad after 8 years. First heater would heat to 154 degrees with a setting of 150. Very good. New one heats to 140 degrees with a setting 150 degrees. Digital ESM screen on heater reads 150, but the water is only 140 by my temperature test. I talked to complaint line 5 times in 7 days and was told to do various test, but the temp never went past 140. They replaced both thermostats and temperature still never past 140 with ESM reading 150. They first told me standard temperature was plus or minus 5 degree range. Then, they changed their minds and said it was 10 degrees. They are calibrating their equipment to operate 10 degrees less then their Energy Smart module reads to cover up a performance issue with their water heater. They say this unit will operate between 80 and 150 degrees—nothing’s said about a plus or minus operating range. I will buy a new temperature gauge to see if my old one is correct. It was tested against a digital one a couple of years ago when I had a new dishwasher installed by Lowes. The installers gauge read over 152 and mine read 154 degrees at the sink next to the new dishwasher, so it was close to accurate at that time. Whirlpool is happy with their under-performance.

Model WTW7600XOW, installed 12/9/2010. For about 4 months this washer has sounded like a jet plane when spinning. I called Whirlpool to see if it was recalled or what they recommended. They provided 2 repair places near me. The repair shops recommended buying a new washer since the repair is so costly. A 4 year old washer used by 2 people should have bearings that last more than 4 years.

It was obviously designed by someone who has never had to clean a refrigerator. There are grooves in the door gaskets seemingly making their sole purpose to collect crumbs and mold with no obvious way to keep them clean (No, Q-tips dont do it). A layer of ice forms below the basket in the freezer (bottom freezer) which, when it melts, soaks the kitchen floor. Ice must be chipped out at least every two weeks to avoid flooding.

The washing machine does not wash the clothes. It does not clean the clothes and goes off balance all the time. I have had it 9 months and waited to write the review to make sure I using it properly and giving it a chance but to no avail. It is awful. It leaves white lines on the dark clothes and does not take makeup stains out of the white towels. Those are just a few examples. The clothes have to be washed sometimes twice to feel they are clean enough. So it is not cost effective and uses more water which is counter productive to the HE.

Whirlpool gold series refrigerator leaks water from freezer after 14 months because ice builds up causing the door not to shut properly and rime ice forms over food. I called Whirlpool and theyve not heard this problem before and stated I should have gotten the extended warranty. This is ridiculous. The internet is flooded with people having the same problem.

I called customer service line regarding my Cabrio Automatic Washer (Model No: WTW6600SW2; Serial No: CU2171019) purchased on 11/24/07, to report and ask for assistance with a chronic ongoing service problem. Several calls in the past and service visits (at my cost) did not rectify the problem. Although there are many similar complaints on this machine regarding the loud noise and resulting problems during the spin cycle that involve the tub and rods, the representative said So sorry or Too bad we cannot not help you.My machine now does not run and is less than 4 years old --just like every other report. I get an error message F which the representative alluded to something involving the electronics. Machines purchased in 2004 from Whirlpool have across-the-board similar problems that Whirlpool refuses to take ownership for. This machine is their top of the line model. I dont feel the financial burden of repair or purchase of a new machine should be on the shoulders of the consumer. We bought in good faith from Whirlpool and expect Whirlpool to live up to their responsibilities. Thank you for any help you can provide.Rae **

I hate this washing machine (Whirlpool Cabriolet) with every ounce of my being. That may sound harsh when talking about a washing machine. But, I assure you it is warranted. I have owned many washers in my day. This machine came to me after a family member passed away. The machine was almost new and had not been used very much at all. I found out very quickly that in order to simply wash a load of laundry could take as much as four hours. Every time you go to do laundry you get continuous codes and alarms. So it is a series of trips up and down the stairs to reset the machine, try to equalize the balance, and in many cases I have to unplug the machine and reset it all together. I have researched it extensively. And I have followed the instructions in the manual and from online instructional videos trying to resolve the multiple issues. I cannot wait to get an average everyday washing machine that is not too smart for its own good. I hate, hate, hate this machine!!!

I purchased a refrigerator Model# WRF736SDAW12 on 8/9/14 and from day two, Ive had nothing but problems with the ice maker. We NEVER use crushed ice, but we get a lot of crushed along with cubed and crushed/shards of ice all over my fridge, hands and floor. My daughter (wearing her heels) already slipped and fell while walking past the fridge, not realizing that there was ice lying on the floor because my floor is light/multicolored, so we cant see the ice.After several calls, the repair person replaced all the components of the ice maker and the repair person was told (2/26/15) from the Whirlpool tech that we would just have to live with the problem because its normal and he was advised to tell me to get a larger glass. The repair person looked at my glass, seeing that it was already large, shook his head and said Whirlpool must want me to start using a bowl to catch all the ice. I couldnt believe it?! I bought this fridge expecting to receive ONLY cubed ice and yet I dont, so Im sure why they put that cubed feature on there when I cant utilize it. I only want a little ice, but the first thing that comes out is the crushed ice, and in order for me to receive more cubed ice, I have to fill up the entire cup that includes the crushed/shards of ice which floats to the top and ends up in my mouth. Thats the purpose of me selecting cubed, so I dont have to drink it!After the repair man left, I called customer service (2/26/15) and she told me that ice gets stuck in the chute?, so thats why I get crushed ice, but its normal she says. How is that normal? Please read all the reviews/complaints from both the Whirlpools and on Home Depots website for this model and you’ll see this is a problem, there is a flaw in the design.I cant believe a big company such as Whirlpool would treat me so poorly and brush me off like this. After the many posts I put on their Facebook page, they over and over say they will be in contact with me. I have yet to hear from them. I found another story on Pissed Consumer where a senior fell due to the ice falling all over the floor, so its not just me that it has happened to. Theyre putting people in a hazardous situation and they dont care.I have an autistic son who gets ice constantly, I can’t supervise his every move and I’m not able to keep up with his dropped ice nor can he remember to look down for it. I’m concerned that next time my daughter falls; she won’t be so lucky and could sprain or break something. How about my visitors? Do I worry about them suing me when they fall? I’m not so annoyed at the fact that I step on water with my dry socks or the 24/7 noise from the motor or the left door not shutting all the way than I am with the safety of my family.

The oven is a joke. It does not self-clean. I have to buy oven cleaner and clean the oven like in the distant past. They are lying about it being self-cleaning. Do yourself a favor and buy a real self-cleaning oven. NEVER WHIRLPOOL.

I have a Whirlpool gas water heater that failed after only three years of operation. My previous water heater in the same spot lasted 18 years. The problem is a defective thermo coupler design that burns out if a filter you cant access isnt cleaned every three months.

We bought a new Whirlpool side by side refrigerator almost a year ago based on good reviews. There are many things that we love about it; however it has had ongoing problems and the the latest one cannot seem to be fixed despite multiple repair calls by two different repair services. The service center has been responsive and even extended our warranty but we are getting tired calling them and having repair people in our home. At what point does Whirlpool consider its appliances to be lemons and replace them?

We have a Whirlpool Quiet Wash Plus dishwasher thats been doing a great job cleaning our dishes for just shy of 24 years. We use a cleaner every 2-3 months to keep everything cleaned out and sanitized. We use a liquid detergent and a rinse aid and the dishes come out clean every time. We feel like weve been blessed with this machine and would definitely buy Whirlpool again.

Had to return my first 2019 purchase due to refrigerator freezing food and imbalanced top doors. I was unable to get straight answers from Whirlpool and so the mgr at BB gave exchange same problems except door not as off. Cheap product make/model. A class action lawsuit from 2016 has occurred and the company continues to distribute the same issues in their new make/model.

My induction cooktop totally failed to work two months after installation. Whirlpool sent a repairman who told us it was the main board. He also said he was unable to locate any of that part anywhere in his computer. We called Whirlpool via our store, Ikea. They apologized, asked for 48 hours to locate a part, then said they would replace the cooktop if they were unable to find out. Almost 48 hours later, they hadnt located it and denied any replacement option. The parts cost is over $800. The cooktop cost just over $900. Whirlpool reps would only read from a script of legal warranty jargon. Then they said they needed 5 to 7 days. We had a baby visiting - we needed our stove. To me, an apology would be replacing that unit if the part wasnt available, not a verbal statement. Fortunately, we had the phone # of a local Ikea manager who told us to bring the cooktop to the store as they had them in stock. They replaced it with a new one. Over the years of my long life, I have bought many Whirlpool products. Never again. I need a washer and dryer, and will not be purchasing any associated with the Whirlpool Corporation. Thanks to Ikea, though, for standing by their customers.

This is the worst washing machine Ive ever purchased. Bought 12/19. The water level never never goes up high enough, to cover the cloths. I have to add water no matter what setting. I hate that. The sensor isnt working. You arent able to adjust it yourself, its computerized. The water shuts off when you lift the lid so you cant rinse out the soap or fabric softener caps. I hate that. The lid locks when the rinse cycle starts so I have to unlock the lid to add fabric softener. Why lock the lid so soon, wait till its in spinning mode. Really really badly designed!!!! Will never buy anything by Whirlpool ever again!

I replaced my 12 year old Whirlpool double ovens with the current Whirlpool double ovens. The new 30 built in double ovens have been re-designed to vent the heat below the lower oven. The ovens come with a part that pushes the heat down instead of straight out. My built in ovens have a cabinet drawer below and after using the ovens just 4 times over the holidays I noticed the heat is damaging the finish. According to Whirlpools service center I should have checked on that before buying/installing. They told me to stop using my ovens, that this is a fire hazard, but they are not responsible. They do not have a solution to this problem. This is a poor design on their part. There is a disclaimer in their installation booklet that came packed with the ovens that the installer gave me. It says the cabinets need to be able to withstand the heat of the ovens. The cabinets can handle the heat of the ovens, just not the hot air venting directly onto the cabinets below the oven. Where does one find cabinets that can withstand 400 degree heat being pushed directly onto them? As a customer I did not have that information until after the ovens were installed and it was too late to purchase another brand.

We bought a Whirlpool dishwasher (Ser# F21102027MOD, Model# WDF730PAYB2) after reading some of the reports that it was just as good as a Bosch. Wrong! We bought this washer March 17. On May 17, the selector switch and sub control broke down. We had bought this item at the HH Gregg store here, and also purchased a 5-year warranty which they said we cannot use because the dishwasher is only 2 months old. Is there a lemon law? And what makes this worse is that we called Whirlpool on May 18th. They could not get anyone out here until May 25th to look at it. As of this time, they still could not fix it because the two parts had to be ordered. Today is June 1st and the part is still not in? Makes me think, does this part always go down because its on back order? So you are fully warned, do not purchase a Whirlpool. If I can get some extra money, I am throwing it out and buy a Bosch because I dont think it will ever be fixed.

I have a pretty small refrigerator since I live in a condo. It has lasted me about 4 years and is still running very well. It is very easy to clean. I dont buy a whole lot of food at one time. The size is big enough to hold what I buy every week. The appearance is decent. Only two people use it every day. I havent had any problems with the refrigerator in the four years I have had it. I get frustrated sometimes when opening up the bottom storage container. If I pull it out too far, it falls to the floor. This happens especially when the container is full of fruits and vegetables. I guess bottom storage container was designed that way for easy removal to be cleaned. I really like the adjustable shelves. I can adjust them perfectly to store food containers and jugs of milk and other drinks. I like the door shelves in the freezer compartment. It is great for small packages of vegetables.

We bought this 26 cu ft fridge from Nebraska Furniture Mart in April 2017. In November stopped making ice. Was repaired. Now it’s not working again. Multiple enquirers shows this is a common problem with this fridges. I’m debating whether it’s worth the effort to repair it or just put in junkyard. WORTHLESS piece of shiny metal.

My mother and grandmother swore by Whirlpool washers. They were the best. So, naturally I never wanted any other brand - then came the digital machines. End of an era. My experience with my 1 year old digital machine has been very frustrating. I do not like it. I prefer the old system.

All of these awful reviews and you continue to sell the Made in China JUNK!!! And shame on the stores that advertise and sell Whirlpool JUNK!! They should put a warning on these machines stating Will not last, gets off balance and does not clean your clothes. Yes we bought the Cabrio like the others, our clothes would not get clean, because like sheets, would end up looking like a doughnut without a hole and all of the dirty water would drain through the middle and make a spot. Then you have to wash them over and over. But that is not the worse part! It only lasted 13 months, YES I said 13 months just past the warranty LOL!!When the man came to make repairs, it was the gear box and was going to cost almost $600. Almost as much as we paid for the machine. He recommended getting a Speed Queen, we did and I LOVE it!! I think it is the BEST MACHINE I have ever had. They are a little hard to find though, but I found where they were sold on the internet and the dealer had to order it. Well worth the time and trouble, (trouble) which I dont expect to have with this machine. Like I said it is a wonderful beast. And I will never buy another product made by Whirlpool. Before my husband retired he made prototypes for autos so he knows about testing and Whirlpool had to know this product had bad flaws before they put it on the market, I call that fraud. Bad taste in my wallet, Michigan.

Bought this washer in May of 2019: Whirlpool - Whirlpool - 4.5 Cu. Ft. 37-Cycle High-Efficiency Front-Loading Washer with Steam and Load & Go™ XL Dispenser - Chrome Shadow. Model: WFW6620HC. SKU: 6313774. Paid over $1,000.00 for it. FIRST TIME washing our sheets, we had snags & rips. I immediately called and was referred to Whirlpool and then referred to an outside repair company. They sent a technician out who said everything was functioning properly despite having ruined 3 sets of sheets (these were not all washed at the same time & I didn’t realize they were being snagged until making the beds).I continued to use the washer - clothes were fine, but yet again, MORE sheets and now comforters RUINED!!!! I called YET AGAIN after troubleshooting the problem myself and finding that the drain holes in the drum had metal pieces sticking up causing the items to snag & rip. Another day taken off work to stay home for the repair. The repair guy comes out, the part was broken. So now I’m left once again with a faulty washing machine AND no ETA on when the new part will arrive and be installed AND having to take yet another day off work.7 sheet sets, 3 comforters, multiple shirts, & multiple bathing suits RUINED & was told there was ‘nothing they could do!’ I will NEVER EVER AGAIN purchase anything with the Whirlpool logo. It’s JUNK! Just an FYI, this was initiated in May of 2019 and it is now the middle of September 2019 with no fix updates. Who can go months without doing laundry???? Once again, poor customer service and JUNK of a product!

Found after care service as bad as oven performance. Phoned for advice and told need to get used to new oven. My advice would be do not buy whirlpool ovens.

I bought a new washer thinking I was upgrading. Wrong!! Well the new so called technology they put into these machines is overrated. They took a good thing and instead of advancing they have took two step backwards in time. I wish I had kept the old washer I had. I think I would rather use an old time wringer washer my great grandmother used. They are probably faster by hand. This new Whirlpool grabs every string on my hoodies and twist my clothes so tight in knots. I cant even remove my clothes until I fight and get mad enough to write a review. Whats up with these new washers?? Get rid of the slots on the Agitator!!

My issue is I believe that Whirlpool should pay for my tub and bearing part because the washing is only 16 months old. Because it went over the one-year warranty by four months, I shouldnt have to buy this part considering it is such a big break for such a young washer. Please advise if Whirlpool will assist me with this issue.

All JUNK!! Replaced all new within the last two years. The washer I replaced was twenty + years and was still working fine was just upgrading, big mistake! Washer is sounding like it is going to walk out the door. Replaced dishwasher after twenty years and the new one was leaking within one year and recently got replaced. The new one did not last one year and also is leaking. Now washing dishes by hand. Lastly replaced hot water heater and that is junk too. Has six year warranty after one year pilot light wont stay lit, Whirlpool said would replace the gas control valve for free but I need to pay to install. I WILL NOT PURCHASE ANYMORE PRODUCTS FROM LOWES OR WHIRLPOOL AGAIN!!! HOW CAN A RETAIL COMPANY REPRESENT SO MUCH JUNK?

I am a single parent. So I was very excited when I had saved enough to purchase a new washer and dryer. I purchased Whirlpool because I had been told that was a good brand. From the beginning, I was having issues with the washer (Whirlpool Front Loader model #WFW8300SW04). It wouldnt start or it would not spin, or it would just lock and not be able to get it open. I had purchased a warranty. So I called to have it serviced. The tech came and told me that I needed to have my floor leveled under the washer. I hired someone to concrete under my washer and dryer. Again the washer still did the same thing. I used the warranty again. The second tech told me that I needed to have my electrical outlet changed. I again hired someone to change the outlet. Yet still the machine didnt work. I then hired a tech to come out and was told the mother board needed to be replaced. Had that done. The machine worked for a short time with no issues. But yet again it wont start, or wont spin, or it locks and you cant get it opened. I contacted Whirlpool and their answer to the problem was they would be glad to set up an appointment to send out one of their techs (at my expense). I have hired another tech and being told that the mother board once again needs to be replaced. I am so disappointed with Whirlpool and their service. I dont understand why they won’t stand behind their products. I will (when able) purchase another washer, but it most definitely will NOT be Whirlpool. Anyone else having issues with the same model? Would like to hear.

Purchased a Whirlpool Cabrio Washer 5 years ago because our other washer died after coming home from vacation. Its just 2 people in this household so I dont do mountains of laundry. The other machine lasted 15 years so go figure. We purchased the Cabrio from Lowes. Got the extended warranty but as it goes the machine fails when all warranties expires. Over the last couple of weeks this machine started to not complete a wash cycle. All lights go off except for spin light and machine stops. Even asked the person in charge of washers and dryers at Lowes about this who then told me to get an extension cord and plug it into a different outlet. Seriously! I have had to unplug the machine after it fails to complete cycle, wait 5 minutes or so, plug it back in, select rinse and spin, it fails again 13 minutes left in cycle, unplug again, plug it back in, select drain and spin, wait for it to MAYBE complete that cycle. Do not purchase this type of machine. Just for a technician to come look at it is $100 or more and to replace whatever circuit board is probably another $300 or more. Screw that! Going to find a good old fashion one if possible. Piece of junk. Not going to spend $700 or $1000 just to wash clothes for 2 people.

Whirl Pool Duet Wash WFW9400SW - I had this washer for 5-1/2 years. I use it about 3 times a month. Warranty ran out this last February. Machine stopped working. Called tech and he came and said I need a new console and power board. Two weeks later I get told they dont make it anymore and sorry about your luck. I used this washer under 200 times in 5 and half years. Whirlpool offered nothing and I will never buy a Whirlpool product again.

Whirlpool Cabrio Washer and Dryer - The washer does not stay balanced even with a very small load (even though advertised can wash King size comforter). Even with a light load, we have to put the dryer on Heavy Duty or Bulky...and usually have to dry a second time. When attempted to contact Whirlpool, no help available. WORST PRODUCT I HAVE EVER PURCHASED... Would not even want to GIVE this set to a friend or family member. DO NOT PURCHASE THIS PRODUCT.

This dishwasher is disappointing. Very noisy. Water consuming, and does not clean dishes properly. In addition not much options with timing settings. There are just few setting options and each take long time.

In addition to that I find the HE rating a joke as it takes 2+ hours to run a load of whites despite it saying on the read out that it will be 1 hour and 4 minutes, it literally tears up my clothes. I have now gone through 3 sets of sheets, 4 towels, 5 baby onesies... How can a washer that doesnt have an agitator cause holes and shredding in a garment? I honestly dont know what to do anymore. It takes two days to do the wash for 2 people when I could get it done in hours with my old machine. And to think I spent close to $900 on this washer makes me sick! I want to go back to my old agitator type washer from Maytag!

I purchased a washer Type: 587-08, MOD: 1CWTW48004QO, Serial # C21920164 about two years ago. The appearance of the machine is in an excellent condition but its not working. The tub inside is slanted and makes a loud banging sound when rinsing. It is no longer in warranty. All my appliances are Whirlpool brand because my mom has items that are still 15years and over. This machine that I purchased did not even give me a quarter of that. The prices of these items are expensive and increasing all the time but the quality, durability and lifetime is diminishing at a faster rate. I am worried about all the other items I purchased: dryer, refrigerator, stove and microwave. I am most dissatisfied. I STRONGLY believe that this unfair and unlawful....I work hard and save up to buy these items to only get two years from it......Whirlpool please render some assistance!!!

My wife and I purchased a new Whirlpool Cabrio Washer / Dryer set approximately three years ago and have had nothing but problem after problem with these units. Weve had multiple service calls, multiple parts replaced, and after dumping hundreds of dollars into repairs and service calls (even called Whirlpool and asked for some help with parts cost but was given the cold shoulder and was told, We cant help you), we are dumping these machines where they belong - scrap heap. I will never purchase another Whirlpool product and will tell anyone who will listen what garbage Whirlpool manufacturers are and absolutely pathetic excuse for customer service and the poorest of quality product. Whirlpool will never be in my familys home again and will never see another cent of my monies.

Purchased the Whirlpool DU915 in 2004. Its been 16 years and I havent made a single repair. A lot of that is just proper use, i.e. scraping off food stuff, using correct soap, etc. I have other newer Whirlpool dishwashers at rental properties which have required repair due to misuse. I would recommend Whirlpool products to friends and family.

Cabrio is our washer and dryer. Dryer had no issues in the last 7 years. Washer constantly throw UL or unbalanced error and stops. Rearranging clothes only works for another few minutes. First time under warranty, tech came and fixed it. Second time without warranty, I cleared some loose socks between the tub. Third time same problem. YouTube suggested to change the springs on four corners that hold the tub. $25 and problem fixed. Basically, if you are not an informed consumer you are screwed for $$ silly stuff.

Bought a Duet Whirlpool washer a couple of years ago. After about 6 months, it started to make a lot of noise like a jet taking off. Where we live there isnt a repairman thats able to come and fix it. So we would be required to have it shipped away to have this done. The washer was purchased at The Brick when we bought our new home. When we told The Brick of our problem we were directed to call Whirlpool directly - this we did and like everyone else we were given the runaround with no compensation to come. I will never buy another Whirlpool product again.

I purchased a top load Whirlpool washer from Lowes 2-8-12. It got so it wouldnt rinse. When it came to that cycle, it just skipped it and went directly to spin. I dont know how long it was doing this before I caught it. A repairman came out said I would need the equivalent of a motherboard that would cost $330.00. Needless to say, couldnt afford that amount for repair. So I purchased a very nice used Amana for $100.00. I always thought Whirlpool was a top of the line product. This has changed my mind. If it wont last any longer than 5 years I dont want it. There are just the two of us and we are retired so the machine was not overused. I am so disappointed and angry about this.

I purchased a Whirlpool Cabrio in 2009. It worked so-so over the years but recently stopped completing cycles, citing false load balance errors and leaving towels and sheets sopping wet at the end of a cycle. Three repair appointments later, and still no success. I am thoroughly disgusted that such an expensive machine only lasts four years. Based on the service techs attitude toward the machine and other consumer comments, Im guessing I will have to replace it. You can guess it will not be with a Whirlpool machine!

I bought a matched set of Whirlpool washer and dryer. Within about 3 months the dryer quit running on any of its cycles except heavy duty. About a month after that the washer started messing up. First it quit putting in the bleach. Next it quit adding water except under the heavy duty cycle. Then after about another week or so it quit putting in fabric softener. After a couple of more months it only uses hot water. Now not quite a year after I purchased it the washer now only adds water in the wash mode and not the rinse cycle. Now all this would not be a problem except I had lost the warranty cards and in their website would not let me register it online.

This machine is JUNK and in need of a recall!! DO NOT BUY!!! This was purchased at Lowes for nearly $800 a couple of years ago and what a waste of money. During the first year, they had to send out a tech that told me he was not familiar with top loaders and was not sure why the clothes were not getting clean, nor why they came out with a white residue on the dark clothes. We used the machine cleaner - which the cycles take nearly an hour (how is that efficient?), put in a load of dark clothes WITH NO SOAP and guess what? Then he had me dump in a gallon of vinegar to clean the tub and the wall of the washer and repeated the process and guess what? He informed me that it was just lint. Well, after several visits and using a suggested pin drop of soap, the problem remained. I finally asked him if he was so sure it was lint and not soap residue, would he be willing to taste the lint? It was soap.Obviously after an hour of washing in the efficient washer, the clothes are not getting rinsed. I know this because in just putting in less than ten dark t-shirts, they came out dry!!! He informed me that since he was a contractor for Whirlpool, he was not allowed to continue to come back as he resolved the problem that I was using too much soap! Well, that is only part of the problem. This piece of crap leaks. We not only have a water softener, but a household filter system. In just the last three months, we have replaced the hoses as they are corroding. We were informed by Lowes that the hoses that came with the washers were from China and that they have been replacing them with US made hoses to the customers at no charge due to the amount of returns. Well, those too have been corroding and now I once again have water on the floor.It cost $1.75 to take my clothes to the Laundromat, 26 minutes to wash and ten minutes to get there and back. That is what I have been doing, and using my 23 year old dryer when I get home. It is a shame that the company is not responding to an obvious problem. I only wash two loads in a week - not like I am beating the thing to death with numerous loads or heavy loads. I will not recommend, in fact, I BEG you not to spend your hard earned money on this junk. Buy a $200 washer and if it too craps out in three, four or five years... you are still ahead. You will even save money on headache medication and save your sanity.

My 50 Gallon water heater is still under warranty, model #051718153. The water heater shuts down after a few minutes. Theres a sound of a leak inside the tank. They would not replace the tank; theyd only replace parts. We have already replaced the outer control box and the double burner, and theres nothing else to replace except the tank, which they refuse to do so. If I had called them and said theres water coming out from the heater, theyd have agreed to send me a new tank, but honesty doesnt work.

Bought in 2009 brand new set washer and dryer together at Best Buy. The washing machine in 2011 started its never ending problems. I’ve paid for parts & labor for the door lock sensor mechanism multiple times where I learned to repair that myself even buying parts and installing on my own last time... Then a drain pump went bad. Replaced that. Now a code f51 sensor to a motor rotor not spinning issue. Horrible. All the money and time in this unreliable machine is so awful. This thing also isn’t that great when it works too. Goes unlevel way too much having to redistribute and restart cycles all the time... Wish it washed better for the price and all the trouble. It is the worst machine. Has to be! Everyone I know can’t believe the fight I’ve had through the years with this machine. The company doesnt help you. Costly headache Junk machine!

We purchased our refrigerator new in 2014. After only 4 years and taking meticulous care of our Whirlpool Top Mount Refrigerator, the temperature regulator stopped working - and the condenser fan rang constantly. The refrigerator couldnt get below 50, and the freezer vacillated between 17 and 30 degrees. We live in a somewhat remote area and could not find an appliance repair person to look at it. So we had to purchase a new appliance. Needless to say we did not choose Whirlpool!

Cabrio Top Load Washer model WTW6800WW1 - Although we were very happy with the vendor where this was purchased and happy with the majority of the washer function; there is a problem with the cabinet & lid connectors rusting. Specifically, the lid connector on the left side totally rusted out, and also around the bleach cup, rust. There are also rust spots where the seam of the top section of the washer meets the bottom part. The washer was purchased in 2009. We have had it serviced in the past, prob 5 years ago, it needed a new motor and the rust was beginning to show then, while under warranty. I recently called Whirlpool and the associate told me that she had never received a call with regard to this type of problem. She did give me names and phone numbers of appliance repair in my area. I find it odd that Whirlpool would not make their associates aware of issues like this. I searched online and saw more than a few complaints about rust. So on it goes, no recourse, and as I read about the problem from others reporting this; it was mentioned that the vapors from the bleach cup etc, contribute to the rust. Additionally, even if it was under warranty, I was told that this is considered cosmetic and it would not be covered. Until... and I can only suppose, that until the lid possibly falls off while lifting, the cosmetic ruling may then turn into a function problem. Now there is also a squeaking sound, so off to call the appliance repair, check the cost and next time... buyer beware. I guess a lesson in science as well, hopefully this design flaw will be corrected for the next models in process.

Five years ago I bought a brand spanking new HE set with a top load washer, top of the line Whirlpool. That washer has been a piece of junk and getting it serviced has been a nightmare. It broke, i.e., the computer part, and was out of commission for FOUR MONTHS. I live on an island off of Alaska, luckily I rented one for the duration but STILL. That was an EIGHT HUNDRED DOLLAR MACHINE. I liked that they are new and shiny and look cool. I hate that the electronics broke after a few years. Ive had washers dryers that lasted TWENTY YEARS. The next set I buy will have plain buttons for cycles and NO ELECTRONICS. None. And still none. Electronics instead of plain buttons. Im not kidding, I will never buy another one with electronics. I bought a top of the line Whirlpool HE top loading set for over $1400 five years ago and that washer has been a bust. I have had a repairman out over 5 times and the last time he took it out and kept it in the shop for FOUR MONTHS. I will never buy a fancy set again. I will buy the old kind with the plain old buttons. Do not make this mistake yourself! Just buy a plain old one!

Its big enough, but the ice maker is always messing up, the shelves broke easily, the water takes forever to get cold from the indoor dispenser. The finish, which is called Satina or something like that, dents real easy. It is really a piece of **! When it was new, we had the repair man out 4 times before it was fixed. He even said it was a piece of junk and it should be lemon lawed out. Drawers broke, shelves broke, and parts are really expensive when you break one of the plastic parts.

The machine meets our needs and just the right capacity. It has just the right number of selection for proper washing. Very easy to load clothes and remove from the washer. There were a number of colors to select.