I came here to see if others have had problems with their Whirlpool Cabrio top load washers. I was amazed at how many others forked over nearly a grand ($1000 with tax and extended warranty) for such a heap of nothing. I have lived in the same house for over 35 years, same water supply with water softener. Over this time, I have raised my family and been lucky enough to only go through two washers until 2 years ago when I purchased this Whirlpool Cabrio machine at Lowes. As with others, clothes do not get cleaned. Residue is present and in the creases of the tightly spun and tangled load. After calling Whirlpool and Lowes on nearly day one of my original purchase, no concern was given. Instead, I received the What type of detergent or Could it be your water supply? or What degree of soil does your family have on their garments? A white terry cloth washcloth should not come out grey, even after bleach! My GE and Maytags of the past always did fantastic jobs. They just plain old wore out. As for my new energy efficient machine that takes 86 minutes to wash a load, with expensive HE detergent, an oxy clean pouch, special fabric softeners, I scratch my head wondering how can this be efficient? If a pair of jeans needs pre-soaking, it cant be done in this washer. Instead, I spray the jeans with pre-soak, add my HE products, then fill a mop bucket full of water and dump into the machine 5 minutes after the 86-minute session has started. What a joke! For two years plus, I have vented to my poor husband who thought he was buying me a new innovative state of the art machine to make my life easier. I only wish there was somewhere or someone that I could contact to get some satisfaction for my agony with this poor quality product! Yes, I am venting. I dont have another thousand dollars to spend for a new machine. Believe me, if there were to be a class action lawsuit for this lemon, I would be first to sign up!

I brought a water heater from Lowes in 2011 and I had a 6 year warranty on it which will end November 2017. Well now the water heater is leaking and they wont replace it because of the location of the water heater and they saying I need to get a direct water heater. Well what is the use of having a warranty if I cant get another water heater. I will never buy another water heater from Whirlpool! I cannot afford to get a direct water heater.

After yet another frustrating round of laundry I have to write this. This has been the worst purchase (Cabrio 6800 Washer and Dryer) Ive ever made. Like other reviewers, I thought I was buying a high-end (high priced) product that has performed miserably from day one. Clothes do NOT come clean and for some reason, towels and dishcloths get ripped and shredded. All cycles (except sheets/towels) do not dispense enough water. Of course the one that does, results in the ripped and shredded problem. A little more than a year after purchase, we got an error code indicating the computer board was bad. Code would come up during initial cycle start and again at the start of the rinse cycle. Whirlpool basically said tough luck but shortly after, we started receiving offers in the mail to purchase an extended warranty for $175. Out of principle, I did not do this. Instead we discovered that we could push pause/start/pause/start multiple times and it would eventually keep going. We are still doing that on EVERY load of laundry (start and rinse cycles). I am not far from just biting the bullet and buying a new washer. It will not be a Whirlpool. One positive note is that the dryer has performed well, unlike some of the other reviewer experiences!

Refrigerator is only 4 years old and must be defrosted every 2 or 3 weeks as a thick sheet of ice forms in the bottom of the freezer. Also the appliance frequently emits loud cracking noises.

I am a working single man. I needed a used washer. I shopped the new washers but they were a lotta money. I seen many of them were without agitators. Well heck... who am I to judge the progress in technology?? So, going around to the used appliance store I run across this Whirlpool Cabrio. OK, Whirlpool meant quality my entire life. So, I bought it. MASSIVE MISTAKE!!! This POS is no washing machine. I dont know what it is, but it is NO washing machine! It is a machine that runs a very few gallons of water into a load of clothes and makes them wet, and that is about it!!All I know is the federal government is dropping the ball on this situation BIG TIME!! To allow a company to foist off on consumers such a PILE OF JUNK!! The pile of crap is PURE junk as far as simply doing its job... washing clothes!! It is a DISGRACE of an American product, and I will NEVER buy anything made by Whirlpool the rest of my life!!I took the device off the lid that tells it when the lid is closed, and just stuck it in its receptacle in the body... so I could raise the lid while it is running and watch this POS in action and try and figure out what the hell is going on. First big problem is it NEEDS an agitator!! Obviously Whirlpool had not figured out how to make the clothes circulate without one. Second is the water level (no matter what cycle setting) is obscenely LOW!! The clothes do not circulate AT ALL, and about 1/3 of them do not even get below water level for the entire cycle!! What I am forced to do is use a water hose and run a lot more water off into the tub just to get the clothes in the damn water!! And ever at that, the clothes still do not circulate AT ALL!! They just rub up against each other!! And I have to use twice as much soap than called for!!

I purchased a Whirlpool refrigerator for my condo in February of 2012. During the past six months it started to freeze everything in the food compartment, and then during this past month the freezer started to slowly die. Ice cream became soup. After calling repair and examination it appears the fridge has basically died and it would have cost me over $500 to fix a $570 refrigerator. That type of lifespan is unacceptable. Before energy efficiency demands from the government, refrigerators lasted much longer. In the 50s, 60s, the refrigerator my parents owed lasted nearly 30 years. Am I expecting too much? Apparently so. I went out and purchased a Frigidaire this time. Hopefully, Ill get a few more years out of that one (Not happy).

Thermocouple failure on a Whirlpool water heater - We are having trouble finding the part to replace it because the thermocouple is threaded left-handed, and Lowes does not seem to have any replacements in stock locally. Meanwhile my tenants are without hot water, and my repair bill is escalating due to labor.

Our Whirlpool Dishwasher model WDT710PAYW is less than 2 years old and is rusting on the outside of the door where the steam vent is. Apparently the hole that was made in the door for the vent was not sealed, now the paint is blistering up due to the rust. Will not purchase another Whirlpool.

Model: Whirlpool Professional FF 32 Elite. Purchase date: 06/2009. Problem: Temperature maintenance issue. The basic need of refrigerator - unable to set/maintain temperature. The cooling system is not working! Poor customer service: Representative charged for visit. The representative is unable to find the root cause! Approximate expense of 4-5k with no guarantee of problem being fixed. Better go for other brands like LG, Samsung.

My first washer a Sears Kenmore lasted us 25 years before giving it to our son who used it for another 10 years. This machine is compatible with that one. Both are simple with a few of bells and whistles. That is remarkable in todays gotta have all of the fancy gadgets mindset. The Whirlpool machine does a very good job of washing clothing...period!

I am so disappointed in my whirlpool W10431035A gold series dishwasher. I bought this 2 yrs and 2 months ago on black Friday at a lowes. I wanted to have a whirlpool and I thought they were a good brand. It has been a little over 2 years and my dishwasher no longer works. The start button no longer works. It is not even that old and appliances should at least last 4 years. I could understand if the plastic utensil holder or dishwasher rack breaks...fine, you use plastic. But this is an intricate part of the dishwasher....the start button and it does not work. I am so disappointed in whirlpool. It is the start button...how can this break. The only thing I do is press normal cycle and the start button...that is it. How can this machine break so easily. How can whirlpool build and sell such a faulty product. So disappointed.

Every appliance Ive ever owned has been a Whirlpool product. I am on my second set of Cabrio washers and dryers. I havent had any issues with the dryers, but the washers are a different story. My first washer, bought in 2008, started throwing water and oil underneath while spinning. A service technician came out... I had to have the entire tub replaced seeing as how the bearings that went bad were in the motor/spinning assembly that was built into the tub. I moved in 2011 and needed another washer and dryer. I was told the problem had been addressed. Now Im having the same problem... the washer is so loud when spinning, you can hear it on the opposite end of the house with doors closed! So the bearing problem has NOT BEEN ADDRESSED!!! Whirlpool will not stand by this product!! Loyalty is not a factor in their assistance... Only profit!!!

Whirlpool has been a well known brand for many years producing well made appliances. With strong customer support and appreciation. I myself have owned many appliances made by Whirlpool from Fridges to Washers and Dryers with no problems.

I purchased a Whirlpool washer 7 months ago, and a month ago, it broke. I have been without my washer for 1 month, and it has been repaired 4 times in that month. It is still not working. All I get is that, its under warranty, and there isnt anything they can do, but to keep trying to fix it. I have been having to take my clothes to a laundromat, and pay to have them washed. I have asked for them to deem it defective, but they refuse.

Purchased a Whirlpool Cabrio washer with the glass lid. This is not a good washer to buy! The clothes do not get clean. Have to set it to bulk to get enough water to even cover clothes. Biggest issue is the lid. I have had to order a new one as it cracked on both sides back by control panel. I took the old lid off and discovered why the lid cracked. I have read many complaints about this same issue and everyone said Whirlpool would do nothing about it or even acknowledge there was a problem.Here is the problem. On each side there is a spring to hold the lid up while in the open position. The lid is plastic. When I tried to push those lid pins down with the lid off they would not go down. The springs are too strong for the plastic. When the lid is down the springs are trying to hold the lid up, so they are pushing against the plastic. Given time the springs win out against the plastic and the lid cracks and breaks. I am just a simple housewife and I figured this out! I hope that every manufacturer that is making glass top lids STOPS making them out of plastic, uses metal instead, uses a spring that is not as strong, or foregoes the current design and comes up with something that is better. It is for certain that I will never buy another Whirlpool appliance!

I bought my home in 2010 and less than a year my Whirlpool microwave started forming a crack near the handle and today August 22nd, my husband and I are looking at it thinking, this is totally coming apart! My Whirlpool refrigerator had issues also. Stopped cooling less than a year, and I am thankful I had a warranty with it. Of course it was still under the manufacturers warranty. Use to be able to depend on WHIRLPOOL. Now you feel like youre in ONE with their products!

Where to begin? I bought Whirlpool Duet Front-Load Washing Machine about 11 months ago after my top load bearing went bad and start making a lot of noise after 8-9 years. 4 months ago (6 months from purchase) it started to act strange; washing machine will not unlock after a cycle, start throwing F3E1 error. Thats when I first called their support service. Their service technicians are very nice actually. They seem to be local small appliance shop, contacted out by Whirlpool, from my guess. Initial visit was to inform me that Im using WAY too much soap, while I was only using well below what was recommended by Whirlpool manual. RED FLAG #1. Technicians told me to stop using too much soap or start using POD. Also to flush my washing machine with 2 cups of white vinegar in hot cycle every few weeks. Ive changed my soap to Tide POD and starting flushing my washing machine immediately after he left my house. It was running OK, but I still saw F3E1 error at the end of every other cycle, until... thing went really bad one day, it simply stopped responding any command while clothes was still in the washing machine. I unplugged power cable and plug it back, it hums for 10 mins and in the end it was the same result. After several attempt, it finally unlocked itself, thus I could wash my clothes at my parents house. This is when I called support service 2nd time. The same technician came and this time, I had video recording of everything. He could not dismiss this with simple soap theory, so he opens up the washing machine and tells me that its due to bad control board. He proceeds to order new control board, which took a few weeks. New technician comes back with new control board and installs, runs a few test command (not full cycle) and leaves. During this whole time, Im left with no washing machine at home. Good thing I travel sometimes and laundry is done remotely sometimes. This repair didnt improve the situation much. I called them back for another appointment. Another technician comes back and tells me that Whirlpool sent back BAD control board. Now, Im really suspecting their product is really piece of **. At least at this point, I was still happy with their service. He leaves my house claiming that they will order new control board and re-install.A few days later, I receive a call from a lady, claiming that Whirlpool has instructed them to ask me to use different outlet, since they believe my outlet is causing issues. Now Im really pissed. Coming from electrical engineering background, I know theres always any chance, but they should double check this with their own technicians. Anyways, I perform their recommendation, which I knew was a shot in the dark. During this whole ordeal, Im working on a project that are out of state (CA). Not only do I have time to stay home for all these service visits, but Im not even home to test my washing machine. During one of the holiday, I was able to take a few days off. This is when I decided to take different approach. I went to the retailer, whom I purchased my washing machine from. They were also nice, but theres so much they can do.I called Whirlpool direct line to explain my situation, how unhappy I was, and to replace my washing machine. Their response was by the book: We can only execute our warranty policy and replacement is not part of warranty. The representative specialist had enough nerve to ask me why I have not called back in several weeks and continue to repeat it as if its my problem for not reporting back. I had spent 2 months of supports and 4 site visits, where I had to reschedule my work or take a day off, before travelling for projects after holiday seasons. This representative really took customer service to next level of hell. In the end Im without properly functioning washing machine for 4 months. I have to coordinate with my parents to use their washing machine when Im back home. My advice, you should really think 3 times before buying Whirlpool washing machine or any other appliance. Also consider that youre on your own, when their product malfunctions, and youll be sitting on dead appliances.

Purchasing this refrigerator Model Number WRS571CIDMOO in September 2015 and now only being May 2017 the ice maker has stopped working. When I contacted Whirlpool USA they offered a warranty plan for $454.00 for one year when I purchased the refrigerator for $989.00. I told the representative, Why would I pay that much money for one year of service when I purchased the appliance for half of what the service fee? I now will no longer purchase anything from Whirlpool when other brands last much longer!

We just recently remodelled our kitchen and decided to buy a Whirlpool Range. Big mistake. First off, the range was advertised as a built in but it ended up looking like a slide in. We were disappointed but decided it was ok as long as the range performed fine. However, within 6 months of buying it, the oven fan broke and the oven became unusable. I used it only 2 - 3 times before it gave up. Extremely disappointed. Our old oven was sturdier and lasted many years and was in a very good condition when we gave it away. Extremely disappointed since we paid a lot for it.

The board manufacturer number W10312659 went out. They replaced the board. The oven was 6 months old, luckily was still under warranty. We didnt purchase a extended one because mostly it had a good name and brand. Well after a year and a half the board went out again. It gives error code H5P which there is no error H5P. So the boards out. It is very costly and thats with you doing your own service. Never will I buy another Whirlpool stove.

Everything I buy from this company breaks all the time. I purchased these brands hoping they were good but apparently not. Always have to get them serviced. Lately they did an exchange on my fridge. Hope it helps because after thousands of dollars of food in the garbage it better work. And the washer thought, Oh Im paying more. It will be good. At this point will cost me less to buy from another company. Buyers beware. Cause the company cant do nothing good for me so dont buy from them.

Was weary due to not a name associated with furnaces, but we installed a 100,000 Btu unit 2 stage and have not had any issues thus far.

I purchased a new gas water heater from Lowes and paid a plumber to install it. I have been having problems with it staying lit. Once I noticed the issue, I notified my plumber and the plumber was aware of this on-going issue with these water heaters. The plumber told me to call Whirlpool and have them send me a new thermocouple. Ive been putting it off until now, but realized today over the phone with Whirlpool Customer Service that the problem is with the vent. The manual that came with the water heater has a horizontal venting installation, yet Whirlpool claims that it should be vented through to the roof and they sent me, via email, the correct manual. When I asked Whirlpool how the plumber was supposed to know, she said that he should have known that it was not the correct manual (even though there is no model number written anywhere in the instructions manual) and that we should call to make sure that we have the right manual before installing my next product. So, I need to double check every purchase I make! Or is this only with Whirlpool products? After speaking with two different Whirlpool reps, I have concluded that I need to purchase a new water heater, but believe me, it will not be another Whirlpool!

We purchased this washer in 2017, its the top loading Cabrio washer and it has been nothing but junk since day one. Purchased from RC Wiley in Boise and unfortunately did not buy the extended warranty because we trusted that this American company would make a washer that would last longer than 3 yrs. This washer barely washes clothes, leaves a residue on them since there is no agitator, also constantly gets unbalanced or gives and error of LF which means water supply issue when there isnt one. My 15 yr old about has a heart attack when he uses the quick setting and his clothes arent done in an hour and a half. Ive even resorted to turning the thing on to just rinse and spin so things get done sooner, still the stupid washer just sits. I would sell it but I dont want to pass on the pain, so its going to the dump to or to Goodwill cause its not worth the headache. Too bad you cant trust an American company to make a good product. Sad I really wanted to like this washer.

I have 2 rent houses. I purchased 2 Whirlpool gas water heaters with a 6 year warranty, from Lowes in 2010 and 2011. The warranty just expired on 1 and almost expired on the other. I read the reviews and decided I would not spend my time to get a part, I did not want to put any more money into a bad product. Both water heaters leaked at the Honeywell gas control valve without any warning and flooded both properties. I replaced these with Rheem gas water heaters from Home Depot.

This washer started out to be good. Its only 5 yrs old. We began to smell an odor. Went to Lowes, spoke with someone in appliance dept. Purchased something for washer. DID NOT WORK. We have tried bleach everything. Our clothes smell. I have skin rashes and I think it is related to mold and mildew. Called the service center. They said could be a sock stuck around the tub area. They need to recall this washer. We spent a lot of money and it has ruined everything. Cannot get the odor out. We cannot afford another one. There is black mold around the rubber lining when you open up the door.

I was excited to have an energy efficient washing machine and chose the Whirlpool Cabrio top loader. I truly wish I had read reviews rather than trust the salespersons advice. It does not clean clothes properly at all. They come out smelling dirty and are covered in white goo, even when the machine has just been cleaned. Stains never come out despite all of my efforts. Now I have water leaking out of the bottom as it fills. Not impressed at all. What a giant waste of money.

After having our refrigerator for a few months we noticed rust on every stainless steel panel on the front of the unit (6). After customer service sent a technician to look at the unit nothing more was done. I was just told to try and scrub the rust off.

Stainless steel fingerprints and rusting are terrible. The storage doors in the freezer have an open bottom which allows items to slip out which is annoying. The fridge has ample space for all my items without being overly huge for no reason. Great for 1-3 people. The rest is perfectly fine.

We purchased a Whirlpool gas range on 12/3/11. It was to be delivered later that month and days before delivery we received a call the stove was damaged. They asked if we wanted it and could get it at a reduced price. We said no, we wanted a new one and that one was delivered on 1/4/12. This stove has had many service calls to fix the ignite for the oven. The ignite and a circuit board for this problem has been replaced many times. The smell of gas in the house is terrible from the many times you try to light the oven. This problem has happened many times when a family event was going to be done (Thanksgiving, making Christmas cookies). It is also very poor advertisement for the company and stove to have this happen when there are so many people around. They will have a tendency to spread the word by mouth. PS: When we called (12-13-13), the woman stated after 4 calls for the same thing there should be a replacement or a refund of money (All the calls have been for the same thing OVEN IGNITE and GAS SMELL).

I bought a compact washing machine and 4 months later it broke, needed a CCU board. To make a long story short now the machine is 7 months old and still broke. Whirlpool cant locate a part for it nor do they want to replace it. I think its time to get a Lawyer involved. Ive been calling for weeks now and have gotten nothing but the run around from all very Rude employees. Im turning this over to a lawyer. Im done dealing with Whirlpool. For a large corp Im very aggravated and severely disappointed with them. Wish I never bought their appliances. NEVER AGAIN.

Whirlpool side by side model WR5571CIDM. Unit rattles EVERY time refrigerator is opened or closed + plus every hour or so spontaneously. Rattle seems to come from the water filter area. Whirlpool serviceman says its normal for this model and calls to Whirlpool customer service say just live with it. Hard to believe Whirlpool considers this acceptable performance in a new model.

My whirlpool Duet Washer has been repaired twice in three years for more than half the cost of the original product. Now it faces another repair--not worth it!Shouldnt a major appliance last longer than three years? Whirlpool will do absolutely nothing.

Found after care service as bad as oven performance. Phoned for advice and told need to get used to new oven. My advice would be do not buy whirlpool ovens.

In the last two years, the inner glass door of the oven has exploded. The last time was Tuesday, 14th January. The oven door was ajar because we had just finished cooking dinner. The noise was deafening but the worst thing about it was the large pieces of glass thrown all over the kitchen. Most of which were large enough and sharp enough to kill a child and seriously wound an adult. I phoned Whirlpool to report this. The operative I spoke to was very polite but told me these things happen and I could have banged it a while ago and left a weak spot! She also said a Supervisor or similar person would telephone me that day. It is now Saturday 18th January and NO phone call. MY concern is there is no mention of this being a possible problem in their literature and their obvious lack of concern under a Health and Safety situation. Not to mention the cost of replacement door glass.

Aqualift self clean oven??? I followed the directions on how to clean my oven. I wiped and scraped out spilled residue from the oven. Then started the cleaning process. The sides of the oven were not cleaned even when I wiped them with a damp cloth. Scrubbing and scraping with the tools that came with the oven helped somewhat. The bottom of the oven was not cleaned. I had to continually scrub and scrape to get it looking half clean and even then, there were still spots that would not clean away. I would have preferred an oven that uses oven cleaner, it gets the oven much cleaner and with less scrubbing on my part. All in all I am very dissatisfied with the oven and would never recommend it.

My washing machine stopped working. I called customer service and got through to Tonya, in the Benton Harbor, Michigan call center. She was wonderful! Living is SW Florida, were having a difficult time right now dealing with the aftermath of Irma. Tonya is an angel during this trying time! Thank you Whirlpool for have exceptional customer service reps! Ill continue to purchase your products as a result.

The trim on the front the my Whirlpool electric range has rubbed off. This is where the knobs for the burners are located. It was replaced once during the Whirlpool 1 year warranty (so it obviously happened with the first year!) and again during the second year we have had it. We have an extended warranty but have been told that it is not covered. It is ecstatically unacceptable. We have not used any type of harsh cleansers on it - simply a sponge to remove any spills yet it keeps on disappearing. I strongly recommend against buying any range from Whirlpool as it is quite obvious that they do not stand behind their products beyond the first year.

I purchased the machine December of 2010 from Lowes along with the matching dryer. I also purchased an extended warranty. A year ago July the lid on the washer broke at the hinges. I contacted the warranty provider and was told that the repair would not be covered under warranty and the damage was operator error. I purchased a new lid for approx. $250. One year later the replacement lid broke in the same location. I have tried to get a response from Whirlpool no response. I contacted Parts Select and inquired about changes that should have been made to correct the lids. He was not aware of any changes but did advise that the part had a new number which he indicated probably meant a design change. I ordered a new lid just under $250. New machines have a metal frame around the glass instead of the plastic frame which keeps failing. The springs that hold the lid in the upright position are so stiff I can hardly move them by hand. I am very disappointed in Whirlpool quality and consumer support. I will not purchase any more Whirlpool products.

I bought a Whirlpool CABRIO washing machine. I was assured it would do large & bulky. I didnt realize that being so called energy efficient meant that it didnt put enough water in to get my clothes saturated! On large loads or bulky items when I put in my laundry detergent only to find out I had to try to wash them again. Parts of the clothes would still be unwashed & dry after going through a whole cycle! After washing the clothes that did get clean comes out looking like I took them to a stream and washed them on rocks. After taking care of my clothes so they didnt look as old as they were, they are now faded & old looking. I hate this washing machine!

1 year ago I purchased the top of the line large capacity tub cabrio washer and dryer. I dont understand why they sell a large capacity when you dont get enough water to get a handful of stuff clean. If they offered a trade in allowance for a standard agitator washer I would be first in line. Clothes dont look clean at all. Save your money folks not worth it.

Note that most of the complaints are about gas water heaters, but the electric water heaters dont seem to be much better. Mine, barely made 4 yrs old and both elements and thermostat went. Had plumbers in for estimates in to repair - much cheaper to install a new one (No...not a Whirlpool!). Very disappointed in the product.

Whirlpool model EVLl201NXRQOO, serial no. EWT2423236 - Defective paint on the back of the freezer that caused rust to form and paint to peel off. Whirlpool does not warrant manufacturing defects on the paint. Guess I was lucky for it to be on the back and not the front.

Purchased Whirlpool clothes washer Cabrio Platinum about one year ago. Never sufficient water to clean items. Appears that there is no way to add additional water to ensure that items are cleaned. Many items come out dry and still soiled.

Whirlpool Double wall-mounted Oven model#WOD51EC7AW05. Have had nothing but problems (at least 7 problems). The 1st one is a potential fire hazard. Porcelain/enamel shattered on bottom interior panel of BOTH ovens in less than 60 days (exposing underlying metal to rust). Cracked in an odd stress-pattern that indicates the metal expanded during heating, and the porcelain finish did not tolerate the expansion. The lower oven had only been used 2X before I noticed the fracture pattern. Obviously faulty design; a manufacturers defect. Whirlpool claims it is cosmetic damage and when porcelain eventually flakes off, they will send me touch-up paint. (If I dent the outside of an appliance with my wheelchair, thats cosmetic damage. Its a manufacturers defect if the damage happens during normal operation. The appliance damaged itself, not the user.)The preheat function does not work on either oven. The oven indicates it is 350-degrees, when it is actually 125-degrees. Repairman says this is normal; ignore the indicator and navigate by store-bought thermometers”. The temperature can vary 50 degrees on either side of the actual setting (thats a 100 degree range!). Between the faulty preheat and the wide range in temperature, it makes it very hard to bake bread or cake.The rest are annoying problems: The timer is a single “beep” (not even very loud), followed by another single beep every minute. This is not much help if you are folding laundry while the cookies bake. The windows have so many dots on them theyre not clear enough to see how the food is cooking (or read the store-bought thermometers) without opening the doors. The oven produces a lot of steam that fogs up the windows (Ive never had this happen, and Im past the half century point). The exhaust fan is loud and it blows hot air into the drawer under the oven (another potential fire hazard). Dont buy this oven. It has several design flaws and Whirlpool does not stand behind their product.

My 4-year old Whirlpool Cabrio (model WTW6600SW2) has gone out. It cost almost $300 just for the part to repair. It was lightly use; the average use was about three-four loads a week. Thats almost half the cost of what the whole machine will cost if new. I am irate. The customer service was no help. I will never buy another Whirlpool product again..

I like the looks with brushed stainless steel and black. The most difficulty was getting someone to help get it and load it. But other than that, Ive had no problems with the dishwasher.

Washer does not clean clothes period. Darks come out covered with white soap residue and smell dirty regardless of how little soap is used or with using extra rinse, which takes 84 minutes by the way. Whites only seem slightly cleaner since hot water is used and you cant see the soap residue. If you wash more than 5 or 5 items at a time some do not even get completely wet. Just waiting for it to break down next according to the other reviews. I spent a lot of money to get a nice washer and dryer and ended up with junk. Id rather have an old 1970 washer, probably designed better and most likely would clean better.

Just like hundreds (maybe thousands?) of others who have had the same part failure causing the refrigerator to leak, I had it and was told by my very honest, highly reputable repairman (not the one KA recommended!) that it was a DEFECT. I bought a French Door style #4609730. First, I complained on Twitter and the Social Media folks gave me the runaround. I kept it up and then, filed a complain with the Better Biz Bureau. They sent the complaint to Whirlpool, who owns KA. They gave me the runaround too - UNTIL I TOLD THEM HOW MY LOCAL TV NEWS station was interested in my story (true, I went to them too). CORPORATIONS SHOULD NOT GET AWAY WITH DIRTY BIZ TACTICS!

I have been having a problem when washing my jeans in the Whirlpool Cabrio that I have never had before with my old washer. When I wash my jeans, there are always a few pair, never the same ones, that have an odor like dirty dishrags on them. I always hang my jeans to dry so I do not think it is this. I have tried to add a freshener to the wash cycle, it does not work. I have tried to dry them in the dryer with a scented dryer sheet, it does not work. I am assuming after reading these past complaints from other consumers that it is not getting all of the clothes clean because of the lack of water. I always use the deep water cycle, but maybe it is not enough water as previously suggested. I have had an issue with blankets and other heavy items not getting clean and/or not even wet. Thoroughly disgusted with this appliance!! I love all of my Whirlpool kitchen appliances though!

I bought Whirlpool top-loading high-efficiency low-water washer Sept 2018, model WTW5000DW, Serial # C83444466. Worst washing machine ever! No matter which water level you choose, it will not dispense enough water to cover the top of the clothes load, therefore the clothes are just moved from side to side with only the bottom layer of clothes getting wet; top clothes stay dry. Not enough water to fully agitate to clean the clothes!Whirlpool serviceman came today (Jan 13, 2020) to recalibrate the settings. VERY NICE MAN BUT THERE WAS NOTHING HE COULD DO TO SOLVE THE LOW WATER LEVEL. Recalibrating settings did nothing to solve the problem of not enough water. I am 81 years old and I have to manually add at least 4 buckets of water to an average load of clothes. This is unacceptable. Wont someone please initiate a class action lawsuit against Whirlpool for selling this very obvious poorly designed machine? NEVER EVER BUY A WHIRLPOOL WASHING MACHINE. It is a waste of money.

I bought a 50 Gallon Whirlpool Gas Water Heater with an extended warranty from Lowes, it has not been delivering hot water as it should. I checked with Lowes and they told me I needed to call Whirlpool first and get a number from them before they could do anything. I called Whirlpool and they had me do a water volume and a hot water time test. By their own time test guide, my water temperature fell 30 degrees in 13 minutes and 52 seconds, when it should not have dropped 30 degrees until 18 minutes. When I reported this to Whirlpool I was told that there was nothing wrong with the water heater. I then lodged a complaint with the representative but it sounds as if nothing was going to be done.So I am out $999 for a faulty water heater and an extended warranty. Will update if anything changes. One of the reasons we bought this product was it said: MADE IN AMERICA. We wont buy any product made by Whirlpool again, We feel they dont stand behind their product.

Whirlpool Gold with bottom freezer, had it for about eight years and no problems. Great seal and great storage space. Also plenty of space in the freezer. We are a family of four. It is extremely quiet. There is flexibility as to how to mount the shelves and they are easy to clean. I have never had any spoilage.

My Whirlpool Cabrio Washer is only 4 years old. I have had balancing & spin issues since day one. Thought it was just me. Constantly had to drain and spin after rebalancing. Now 10 days ago it cost me $250 to have it fixed. The aqcuator (?) Went. It wouldnt spin out. Now 10 days later it stops again. The appliance guy reads code. F7E7. He tells me the bearings are no good. Will cost another $400 and they need some special tool to fix it. IM DONE. My last set was 15 years old. The price is ridiculous and quality not worth what this triple capacity set cost.

I purchased dishwasher model #GU2800XTVT0 in May of 2009. Today, it leaked water all over and damaged my floor. My husband pulled the dishwasher out of the cabinet and found that the motor had fallen off. It did not have a bracket to hold it in place and worked loose, which then disconnected a hose. I called the customer service but they wont do anything because it is beyond the 12 month warranty. It only lasted slightly more than two years. This is obviously a manufacturing defect and we were just unlucky enough that it failed after the warranty had expired. The most ironic thing is that my husband worked for Whirlpool for 20 years. There is no loyalty here.

My agitator-free washer began tearing small holes in my clothing and sheets about one year after purchase. I contacted Whirlpool and they sent out a service person, who ran a diagnostic test on the washer and said it was fine and I should learn how to wash clothes and load the washer, etc. The barrel of this washer has little holes and I believe that when it spins the clothing, some pieces may stick in one of those holes causing tearing. The service person also told me that my clothes were old. I guess that means this washer is not for washing old clothing. The tears in my clothing are in places that are very unlikely to tear, like the back of my jeans behind the calf of a leg, about half way up from the ankle. There are holes in my tee shirts at the bottom of the back. Even if I were a smoker, which I am not, I would not likely burn holes in those areas. Whirlpool obviously does not want to accept responsibility for this problem, even though there are many other people having the same problem with this type of washer.

My hot water tank wont stay lit. I replaced the heating element, and the thermo couple. It will light up now but it only stays on for about 10 minutes.

The refrigerator fits perfect in my space, keeps frozen (ice cream is creamy not a frozen block ) and cooled foods well. I love the glass shelves. I purchased 2 more bins for the refrigerator door, now I can get all my spices and condiments on the door as well as lots of other things. The freezer has racks instead of glass shelves. The top shelf is adjustable, that is nice in order to use more space. I love the ice and water on the outside of the door.

I love my Whirlpool Washing machine. Purchased it 2 yrs ago & have not had any issues. Its quiet, large capacity. Washes my clothes very clean. The various washing cycles makes it so convenient to wash as much or as little as I need on any occasion. I do recommend to anyone that you do the cleaning cycle on these new washers to ensure top performance when washing.

Whirlpool WFE720H0AS0 - I tried to use the self cleaning oven feature and it cleaned the bottom of the stove but did nothing for the sides, back and door of stove. The top of the stove is impossible to keep clean. Maintaining this appliance is a full-time job. Very bad choice.

Purchased model # WRX7355D8MOO through Lowes summer of 2013. By summer of 2014 ice started building up under freeze drawer. Little did I realize the compressor was failing, air flow was stopped up. Ice maker failed. In 2016 water dispenser calibration off, freezer failed. Called in certified Whirlpool repair. They spent three days troubleshooting problems. Repairmen told me, not to spend any more money to repair this fridge, buy a new fridge. I spent $2300 on this fridge. Its only 2 1/2 years old. Whirlpool better get their quality control issues resolved or shut down the plant. I know many part are made in Mexico, poor quality. Why pay for an expensive appliance that only last two years.

I purchased all new, upper end Whirlpool appliances for our newly built home just 6 months ago, to include a side by side refrigerator with ice maker and water dispenser, an over the stove microwave, a smooth cooktop oven/range, a dishwasher, a washing machine and a clothes dryer. We plugged in the new refrigerator, and after 24 hours of letting it sit and get cold, we bought $300.+ of groceries and filled our new refrigerator. We pulled the milk out hours later and it was warm, checked other food items and found them to be warm, too. I placed a thermometer in the refrigerator and it read 55 degrees. In disbelief, I placed a second thermometer in the refrigerator and it, too, read 55 degrees. Being brand new, only hours old, and clearly not working, I called for a replacement refrigerator. Our builder said we needed to call Whirlpool for a replacement. Whirlpool refused to send us a new refrigerator. Needless to say, we had to throw out all of our food for being dangerously off temperature, and we were less than happy about wasting $300.+ on food we could not safely eat, but glad we didnt have food poisoning. Not even the freezer could maintain a temperature below 55 degrees. While waiting on a repairman, we noticed that we were not hearing the refrigerators motor come on more than once every several hours. They sent a repairman out three days later, and he found nothing wrong other than a poorly fitting door, he said. He replaced the door hinge and told us our refrigerator would be cold in 3 - 5 hours. Well, it never did get below 55 degrees, set on the coldest setting. Whirlpool was called again and they couldnt seem to get another repairman out to fix my brand new refrigerator that could not perform its most basic function, which is to maintain food at proper temperature. Again, Whirlpool refused to send me a replacement refrigerator for this clearly defective refrigerator we were stuck with. We were told it would be 2-3 weeks before another repairman could come out, and then he would have to order parts after he diagnosed the refrigerator problem, taking another two weeks. We needed a refrigerator, like most people do, so we were forced to take this brand new refrigerator and stick it in the garage, not being able to sell a brand new refrigerator that wont get cold. Angry at Whirlpool for taking our money and leaving us with a refrigerator that never worked, we bought a Samsung refrigerator that we are very happy with - it works! After 2 months, our Whirlpool above the stove microwave has the motor turn on when we close the door, and it takes several opening and closing sequences to get it to shut off. We will be replacing this new microwave when we can afford to.Our ceramic/smooth top stove/oven, takes a very long time (at least 20 minutes) to preheat and the temperature in the oven is not accurate to the set temperature, according to my oven thermometer. The cooktop surface is inferior; it gets permanent water spots and it scratches very easily even though we use the correct pans and are very careful with it, and does not come clean easily. The surface feels rough, not slick like the GE Profile ceramic/smooth cooktop range that I had for 14 trouble-free years. I am using the same exact pans that I used with our GE, and we know how to be gentle with a smooth cooktop surface. After 14 years of owning the GE stove, the GE felt slick and smooth, cleaned easily, and did not have one single scratch on it. It looked as good as new when we moved, after 14 years of use. I will be replacing this inferior Whirlpool smooth cooktop range as soon as I can afford to, as well. Last month, right before Thanksgiving, our new Whirlpool dishwasher started making a really loud motor sound and quit working that day. It would fill water, drain the water and shut off. I once again called Whirlpool, and they were maddenly unhelpful. This time, they told me they would have a repairman call me in 5 working days to schedule an appointment to come and see my non working dishwasher. After 7 days, I called Whirlpool AGAIN, to ask why someone did not call me for an appointment. I was expecting a house full of people for Thanksgiving and I had no working dishwasher. I spent a lot of money buying these crappy Whirlpool appliances and am very frustrated. This time, Whirlpool told me that they could not find a service person in my area to service the unit. As if I live out in the middle of know-where?! I live 20 minutes from Austin, the state capitol of Texas! A 20 minute drive from the capitol building to my door! Whirlpool told me I could take my 5 month old, broken dishwasher to a repair shop and that the repair shop would need to call Whirlpool before they did any work, and that Whirlpool would only authorize a maximum of $150 to repair my dishwasher. They actually had the nerve to tell me that I would have to pay for the repair, and they would mail me a gift card in 6 - 8 weeks to reimburse me up to $150 on my new, broken dishwasher that is under warranty. I was furious!! Some warranty! The broken dishwasher is now sitting next to the broken refrigerator in my garage. I needed a dishwasher before Thanksgiving dinner, so I went and bought a Samsung.I realize that all makers can have a lemon, but all of my Whirlpool kitchen appliances are junk!! I will never own another Whirlpool product for as long as I live, and I will tell anyone who will listen about our abominable experience with Whirlpools customer service and the expensive, crappy appliances we unfortunately wasted a lot of our money on. Do yourself a huge favor, buy anything but Whirlpool! Thankfully, everything else about our new home has been great. Our new Whirlpool appliances will remain a very sore subject for year to come, I suspect.

I bought a Whirlpool built washing machine on Jan. 8, 14. It stopped working on Aug. 9, 14. It is now Sept. 2, 14 and I am still waiting for it to be repaired. I am age 75 and it is difficult to load and unload clothes to take them to the laundry. The repairman order a part Aug. 26. Pony Express has not deliver the part at this time.

Apparently my machine, bought in 2011, was the first year they were made in the US. The washer has leaked soap down the front (a front loader) since day one. Service has come and replaced just about everything and its never helped. Its literally a piece of junk. Very disappointing. My older ones were great.

After 32 years of marriage and nothing but Whirlpool (because my mother swore by Whirlpool), that is all we have used. I am so disappointed in the Cabrio washer/dryer set we purchased at Lowes. After 18 months, the dryer just quit. The best part is, we hang clothes out most of the time. It was used one winter, $1400 wasted. We put a cheap Admiral in our second home and spent $500 total and they work fine. I will never ever purchase Whirlpool anything or recommend to anyone. Again, you lost a family tradition.

I bought a house 2 years ago that came equipped with all new Whirlpool kitchen appliances (refrigerator/freezer, stove top and dishwasher). A few months ago, the damper door in our refrigerator broke causing food in the refrigerator to freeze. Just the other day my Whirlpool dishwasher stopped draining properly. Both instances a repairman was needed and were now out over $400 for repairs and parts. I would definitely not recommend purchasing any Whirlpool appliances and I am deeply frustrated that Im having to deal with these repairs and costs for appliances less than 2 years old.

Whirlpool Gas Range Model WFG524LAB0 - Purchased on 09/2013. Product works well but noticed back in July 2014 that cook top was not cleaning well. Did not mind it that much thinking it was just baked on grease and would just do a general cleaning when I get to it. After the holidays and now getting around to clean the range top, I discovered the cause of range top not cleaning well. The porcelain was chipping away.Today I called Whirlpool customer to complain and see what they do. They replied that it was just a cosmetic blemish and that was not covered under warranty. I told them that that cosmetic blemish lead to rusting and eventually result to failure of the product. They also said it was out of warranty but was eager to have a tech come over to check the problem out for additional fee.

I bought a matched set of Whirlpool washer and dryer. Within about 3 months the dryer quit running on any of its cycles except heavy duty. About a month after that the washer started messing up. First it quit putting in the bleach. Next it quit adding water except under the heavy duty cycle. Then after about another week or so it quit putting in fabric softener. After a couple of more months it only uses hot water. Now not quite a year after I purchased it the washer now only adds water in the wash mode and not the rinse cycle. Now all this would not be a problem except I had lost the warranty cards and in their website would not let me register it online.

40-gal gas water heater - I own several rental properties and unfortunately put Whirlpool water heaters in them when the old ones go. It is because they are at Lowes and they are cheap. Today, another call came in from a tenant with no hot water. I called customer service and they determined I received the repair kit from an original design defect from back in the middle 2000s. Now 3 years later, it goes out again. Because I have already received the conversion kit taking thermal couple threading from LH to RH, I needed another part number to repair for a grand total of $160! The same part before the conversion kit was $60. I will never buy another Lowes/Whirlpool water heater for as long as I live. I own a hundred rentals and Whirlpool will never again see another cent for the junk water heaters.

I purchased new and installed my heater in 2003. SN: 0253109845, MN: EE3J50RD0454. I started removing and replacing or cleaning heating elements in 2011: pretty good service. In 2015 I noticed black and brown water coming from the hot water taps. I opened it again, cleaned it, and realized anode replacement was required. That is when trouble started.I tried everything usual including 4 foot cheater bar, heating the coupling, impact wrench, tapping with a hammer, etc. Finally found a 700 ft-lb. pneumatic impact wrench on sale at Harbor Freight. After serious wear and tear on my air compressor and about 1-1/2 hours of work with the impact wrench, I got it out. The threads were messed up some, but I did not look close. I had to put the 1-1/4 inch head back in to return it to service while I found and ordered an anode. Could not get one from Whirlpool and could not buy one in Lowes where I bought the heater.The surprise was when I cleaned the threads to put the head back in, I had to use almost as much time and torque to get it to stop leaking as I did when I took it out. Then, when I did try to install the new anode, it required to same effort. Conclusion, There was some kind of imperfection with the threads in the coupling that messed up the threads on the initial installation of the anode, which made it nearly impossible to remove. Whirlpools quality control stinks. The next one will NOT be Whirlpool.

This is my second water heater in three years. The problem is the thermocouple thermostat. Also, when I drain the water, it comes out of the heater black because of the corrosion in side. I spoke to people in the company, and they were nasty to me. This happened to my two heaters in 2 1/2 years. Please, do not buy a Whirlpool heater.

They will not honor the extended warranty on their fridge which Ive had for less than three years which will not defrost making me lose thousands in spoiled food. Extended warranties are contracts and this company should be penalized and shut down for fraud.

I have used my new Whirlpool range (D-MGR865OES) about a dozen times and the damn thing is going to catch me on fire. I cannot reach the pans on the back burners without rubbing the knobs on the front and turning on the front INFERNO BURNERS AT MY ARM. I cant reach the matching microwave above either. The front inferno burners start on high then can be turned down. It happens every time I go near the thing. Either I inadvertently turn on the fire or just the gas a little and dont realize it until I smell the strong odor of natural gas. Tons of other problems, but this is the worst of all. I called the manufacturer and they call it Buyers remorse and wont give me a credit back. Tim at Freds Appliance just never returns my calls for a manager to call me. I WANT A DIFFERENT RANGE. Buyers remorse? You betcha!!! Never Freds Appliance or Whirlpool again. IF I GET BURNED I WILL PROVE IT IS DANGEROUS IN A CIVIL LAWSUIT. The manufacturer stated on 5/6/16 that there is nothing wrong with the design of this range. I do believe that the other comments are true and my salesman Tim at Freds Appliance lied when he said that the star score was not for the model I was purchasing. They will say anything to get your money and then disregard any further communication. I bought a full house of appliances at Freds Appliance. They know I wont be buying again for 10 years. How do they stay in business?

My Whirlpool oven (Model WFG505M0BS0) stopped working - the bottom oven part (the top burners were OK), the display on top functioned normally, but no fire came on. I called Whirlpool, and then I accessed Whirlpool online and scheduled service with their official service representative - Flamingo Appliance Service ** for September 9, 2020. When the repairman arrived on 09-09-2020, he opened up the stove and checked it, and he told me that a computer part needs to be replaced, as well as the igniter, and the cost would be between $400.00 and $600.00 (I dont remember the exact amount), I told SEVERAL times, maybe its just the igniter (for which the cost would less than $100.00 AND already included in the $134.95), but he insisted that the computer needed to be replaced, I did not like the way he explained it to me, it did not make sense.After that I was planning to buy a new stove, as the repair was too high. But, I decided to try to change the igniter myself before getting rid of the stove (the igniter cost was $21.00). I just got the igniter recently, and installed it, with help from YouTube, and what do you? THE STOVE IS WORKING!!! This is fraud!!! FLAMINGO APPLIANCE SERVICE ARE THIEVES, AND BY ASSOCIATION, WHIRLPOOL, WHOM THEY REPRESENT ARE THIEVES ALSO. I shall publicize to the best of my abilities: NOT TO BUY WHIRLPOOL PRODUCTS!!! This was not a mistake!!! This is the way they rip people off!! Either by paying exorbitant amounts for unnecessary repairs, or by buying new appliances when the old ones are still good. Dont buy Whirlpool!!! Dont use Flamingo Appliance Service. Theyre both fraudsters.

Our slide in range had a burned out element. After waiting a week for the part the range still did not heat. The real problem was the control panel at a cost of $300 plus labor. We were so discussed with the problem we purchased a different brand range. Who should be purchasing a new range after 18 months???? Cost of service call twice, part cost of element, and new range all total another $600.00. Do not purchase this product!!!

My Whirlpool Microwave is cracked all around the door handle and the frame with the insulation foam hanging out of the cracks. Dishwasher also having issues. Completely dissatisfied with Whirlpool Appliances. No longer under warranty.

I purchased the Whirlpool Cabrio HE top loading washer and front-loading dryer about 7 years ago. It has been okay, but nothing special. Recently it began stopping in the middle of the cycle and showing an F51 error. Then all of a sudden the noise during spin was deafening. Brought out a tech, who came and did some eval. Left with some basic maintenance. Did a load, and happily no more F51 code, but still so very loud during spin cycle.Called again; tech returned and said that drum and shaft would likely need to be replaced to the tune of some $500. The same story as others have told. We should have bought the extended warranty. Like others, I also felt that washers lasted at least 10 years. And that seemed a short time given expectations in the past of 20 years of service. Im disappointed in Whirlpool. Even though Consumer Reports gives the Whirlpool Duet washer (new 2013) one of its highest reviews, I cant bring myself to buy another Whirlpool product. It appears to me that this warrants recall as well.

I bought my microwave on Dec. 8, 2010 and paid to have it installed. On June 29, 2011, the microwave quit heating anything up so I called Whirlpool. They sent a technician out and he repaired the magnetron. The tech said it was defective. I accepted that but then on Nov. 8, 2011, the microwave quit again, same problem. I called Whirlpool and told them I thought it was a lemon and wanted it replaced but they refused and said that they paid to have it fixed. They came out and fixed it. Same problem, the magnetron. Well, here we are another six months later, it has quit again. I have been on the phone with Whirlpool. I spoke to a lady named Barbara and she said even though its out of warranty, they would be willing to pay for the parts, not the labor. Of course, labor is more than the parts. So, I asked her whats going to happen another six months from here on. When it goes out again, she said that that was it. They werent paying for any more parts. I asked her for her supervisors number. She advised me to write a letter and someone would call me. Well, a lady named Donna did call and she told me the same thing. They would pay for parts but not labor and the offer was only good for 30 days. Also, I have the tech talk to their techs but she didnt have the number and maybe they could find the problem. Well, the problem is its defective. Thats all there is to it. We could fix it over and over again but its going to keep burning out. I told Donna surely I cant be the only one complaining about this microwave and her response was theres no recall on it. Something needs to happen. This cant be right. We spent hard-earned money on this product and shouldnt have such a problem every six months.

Purchased Whirlpool gas hot water heater from LOWES on 9/25/2016. After the installation, tried to light the pilot light for 90 minutes. Followed the recommended instructions, I could not get it to light. Called LOWES they told me to call Whirlpool. I did so, and told them I will return the heater to LOWES the next day. Whirlpool customer service very bad. Returned the heater to LOWES the next morning, went to a local plumbing shop and purchased a Rheem heater. After installation it lit very first attempt. Now three weeks later I get a letter in mail from collection agency that LOWES turned me in for stopping payment on the check I wrote them. After reading the many negative reviews and they disregard for my and my familys safety, nobody should purchase a Whirlpool gas heater from LOWES.

I cant even tell you how disappointed I am. This washer has destroyed my clothes and towels. Ive tried to reach out to company but they want me to call for service. What would I call for? Washer works, it just makes holes in clothes, in towels. There are so many complaints about this. If anyone know how to begin a process like this, please let me know. Trust me, when I write a review about something, its got to be either really good or really bad. I dont have time to write things like this.

Buy a new in a box dishwasher, it is not working, not a good customer services, I wait 1 week for a tech to come and fixed, and I will wait to tech to come back with parts to be fix. Company not replace the unit, I pay for something that is not working. Very frustrated for the time waste. 3 day off from work.

Dont even consider a Cabrio top loading washer. Wastes your time, money and insults your intelligence. I never use the deep water cycle but boy the machine does! Ive had loads that have taken hours to finish on the quick setting! Thanks Whirlpool.

Cleans dishes very well, a bit noisy maybe that just the model I have. Exterior is very nice, interior there is plenty of space for the dishes and pans. There are no streaks on the glasses. No soap scum left on the dishes at all, very good unit.

I have a Whirlpool Cabrio washer. It was great for almost year. After that it has been nothing but trouble. The body of the washer has rust coming through the paint and large areas that is so rusted that the paint has chipped off completely. A washer is expected to deal with water and not rust through the body. I have a 10-year old Ford truck without a speck of rust. Dont they undercoat? The circuit board has had to be replaced because of rust. I have to take several Q-tips and go under the cover to remove all the rust if I dont it gets rust stains on my clothes, which is impossible to remove. The customer service is non existent. They have left me on the line for over 40 minutes. I hang on only because it would be another hour or so of my time to get someone to answer. I was without a washer for a month while waiting for parts. Why dont they have parts for their products? I had to slop my way too dirty laundry mats 3 times a week as I do 2 to 3 loads a day.My washer is downstairs and stops and gives me the unbalanced message even when its not, running up and down the stairs several times to complete one load. I also get the F51 message for no perceivable reason. The extra rinse button only works 1/2 the time. This was an expensive washer ($1,000.00) and I feel that I deserve my money back. They are knowingly making an inferior product.

I have called numerous times to complain about my new Cabrio washer. The first thing the employee did at the service center was to send me an owners manual, which I did not receive when I purchased the washer at Lowes. I followed all of the washing recommendations and still had problems with soap being left on the clothes. I called again and they said that perhaps there was something wrong with the washer and they were going to send a service technician out. I told her that he would probably not find anything wrong with it. I was just very unhappy with the product. She told me that we should check it out and not to worry. It was still under warranty and Whirlpool was going to take care of the service call. The technician told me that they have received many complaints about the machine, but there were no fixes available at this time. Yesterday, I received a bill from the service company for $129.00. I called the service company and told them that Whirlpool should be billed for this, not me. She told me that I had to call Whirlpool and if they wouldnt take care of it, I would have to. I then called Whirlpool, only to be told by the customer service rep that since they didnt find anything wrong with the machine, there was nothing that could be done. I asked to speak to someone else and she let me talk to her supervisor. She pretty much repeated what I was told by the first person and it is in the owners contract. I told her that I wanted to cancel the extended warranty that I just mailed in this week and she gave me another phone number to call. I cannot express how unhappy I am with your customer service department; the lack of compassion your company displays; and how I was told one thing and then charged a fee. It would seem that you have no eagles working for your company. I cant believe that a company as large as Whirlpool does not stand behind their products.

2010 upright Whirlpool freezer - Door is totally bubbled in rust. Warranty Plan not covered for this. Whirlpool Corp Serv. Dept said they are sorry but it is not a functional problem. Cost of repairs on 3-yr-old freezer that cost $600.00 would be $732.62. This freezer was rated CR Best Buy in Sept 2009 which was why I purchased it. I paid $81.00 for repair tech from Whirlpool today who could do nothing either. Whirlpool knows that this has been a problem as consumers have complained about this rust in Google, some saying they will never buy a Whirlpool product again. Same here!

I bought this washer on 2-28-09. By 3-12 the thing took a crap. The whole counter balance broke off away from the drum. This washer lasted 3 years and 1 month. What a piece of garbage. I expected this front loader to last a lot longer than 3 years! Of course when I called Whirlpool they said, “Well its not under warranty so you can buy the 1-yr warranty for $300.00,” and theyll come out and fix it for me. If Im going to pay $300, I might as well buy a new machine! I only paid $600 for it and to last 3 years is pitiful. This is defect in workmanship if the machine breaks in only 3 years. I told her that something should be covered because it should last longer than that. She basically said “oh well”. Oh well, I guess I wont be buying another Whirlpool again. Steer clear of this Duet Sport machine!

Purchased my Whirlpool WRF989SDAH00 White Ice fridge late September of 2014, received the fridge Early October, todays date is Dec 17, 2015. The freezer is not freezing food properly the last couple of days, all food is unfrozen in the freezer. Have lowered the temp settings has not helped, the fridge section is temperately fine. There is a noise coming from the fridge that sounds like a noisy fan or motor. Phoned Whirlpool Canada, they said they could send someone out. They will charge $100 for call out and over $20/15 min after. I asked whod theyd be calling to service. Said that Id try unplugging the fridge for a couple of days and seeing if that helps, and that Ill call the refrigeration company myself if I need them. Not satisfied with their short term warranties. Especially on such expensive products.

This washer (Cabrio 6th Sense Washer) is less than 4 years old and now needs $500.00 worth of repair. You have to replace the tub in order to replace the bearings. If your washer starts to make noises during the spin cycle, you are in for a big repair bill. I still havent decided if I am going to repair it or junk it. The towels always smell sour even if you wash them twice.

I have an oven that is just under two years old - a Whirlpool. After less than a year, the sensor went out and had to be replaced. After less than one more year, the same thing has happened. They covered the first one, but wont help with labor or parts on this one. There is no user error. Its just a cheaply constructed oven.

Purchased a Whirlpool dishwasher less than 2 years ago, began noticing a mildew buildup inside. Cleaned it, and bought dishwasher cleaner products, but the problem continued. Realized the dishwasher heater was not working. The dishwasher was staying wet, therefore causing mold. Called appliance repair, and spent 3/4 of the price of the 2 year old dishwasher to repair it. The control box malfunctioned. I was told by the repairman that that was unusual. At the suggestion of the repairman called Whirlpool. I was told since it was beyond the 1 year warranty they will comp us nothing. As a consumer I have no other recourse but to warn others, and to never buy a Whirlpool product again!

Whirlpool Cabrio top load washer: nice job Whirlpool! You designed a washer that breaks if you accidentally wash a coin! For the second time in a few months, were fixing our washer because a coin was in a pocket. The coin gets sucked into the discharge pump and sounds like popcorn popping when it drains. It rattles around the inside of the machine’s pump until it breaks the plastic pump housing. You will know when this happens because there will be water on your floor. Did you ever consider a screen to prevent a coin from ruining the washer? God forbid someone leaves a coin in their pocket. Well, if you leave a coin in your pocket and wash your jeans, it will cost you a repair every time with this hunk of junk. This would be my last Whirlpool. It will actually be cheaper to throw this thing out and buy a new one, since it won’t be the last time a coin accidentally makes it into the washer.

Oftentimes when we take out the dark loads there is a white line left. It appears to be detergent that does not go into suspension. We are using HD. Just lately we switch to liquid. Question in our minds is if it does not move the water enough to put the detergent in suspension, how in the world is it even cleaning? I do not see the turnover of the clothes. Where is the quality control with this?

2 years ago, I bought my fridge from Home Depot and the delivery people did not leave a manual. I call to see if they could provide me one because I don’t know how to operate some parts of it. They told me they don’t send manuals anymore. She referred me to a website to download it from an online site. I told her I don’t have a computer. It would be easier if they can send me something in writing and this lady told me that they don’t. She asked- “and you come to us after two years? What have you been doing in the meantime? “And from then on she was very rude and she transferred me to another lady that was worse! I do not need this! And the fridge is very noisy. I’ll never buy Whirlpool again.

I purchased a Whirlpool hot water heater several years back with every bit of the Bells & Whistles that Lowes could bestow on it paid for and documented on the tank; Limited Lifetime Warranty and Lowes Professional Installation. It failed after several years with multiple problems. First, the bottom heating unit failed at the same time, noticing a leak from the top heating units external cover where a supporting screw had popped out, leaking down to the floor. Not only was the Whirlpool 800 number a scham of silence, with no estimated wait time and after approximately 20 minutes, a rep picks up as I could hear their legal department on an alternated line instructing and listening in, then dropping off when those crooks felt I had been placated enough to go onto to the next sucker. I have all Whirlpool Gold & KitchenAid Superba appliances in my kitchen and never thought I would be saying this but I will never purchase another Whirlpool Appliance or shop at Lowes again!

I bought a new non-frost 14 cubic Whirlpool fridge Model # W4TXNWFWQ in 2013 from PC Richards. The freezer keeps getting busted. It actually produces a lot of frost which stops the entire fridge from running properly. The tech said this is a common problem with Whirlpool. I am lucky to have bought the 3 years warranty. But when I call to fix the problem it always takes them a few days and I have to miss work for this non-sense.

First, the storage drawer doesnt close properly aligned. When viewed from the side it looks off kilter. This is because the foot of the range interferes with it closing. Second, what is with the bright blue color of the time/temp on the computer screen? Everything else in the kitchen is green, but now I have bright blue(?).

We bought a gas Whirlpool Stove from Lowes. We noticed it was not heating like our last stove and thought maybe because it was new. No the stove does not heat properly at all. I cooked a pork loin for 40 minutes at 350 and it was still raw in the middle. I have had to cook everything on 375 which makes the door handles and knobs very hot. I called Lowes and they patched me into Whirlpool after a 45 minute wait. The rep from Whirlpool said, you can look at the manual and figure out how to calibrate it. No I cant. I have a warranty that is what it is suppose to cover. Then I was on hold for another 20 minutes. Really no one should tell you to read a manual to fix a gas stove. I will not buy another Whirlpool item. Poor customer service and that make you feel you are bothering them.

A-10 error on display ultimately means needs a new pump. The washer (model WFC7500VW 2) is 3 months, 9 days old and is now unusable. I cannot get any service (under 1-year manufacturers warranty) because the sticker inside the door with the model and serial # is missing (i.e., it was sold to me by Homedepot.com without a serial # on the door label, sticker is intact and is brand new and apparently was printed without a serial #).I made multiple calls to Whirlpool in Benton Harbor, Michigan and finally spoke with Courtney (who states she was a supervisor) pretty much said all they will do is to reprint a label from the factory and I should have it in 7-10 business days. They refuse to stand behind their product and authorize timely repair of their product they sold to my without a serial # on the door tag from the factory. I have to wait to schedule factory warranty repair until I get the new label (probably 3 weeks plus without a usable washer). Courtney refused to contact me via email for any of her contact information or to supply verification of conversation or promise of a new factory label. Also, she refused to try to authorize any type of manufacturers warranty to fix the brand new unusable washer!

I love the brand. I just do not care for the lock lid on all the new washers. I could do without it. I do not have kids to worry about getting hurt. Im looking into finding a brand without a lock lid. I just replaced one before this one. For the lid breaking.