HORRIBLE! I purchased a Convection Oven Microwave in Oct. 2010 and 3 months later, the microwave stopped heating! I called customer service and they replaced the magnetron and two other parts. Two months later, the appliance broke again with the same problem. They serviced it again. Today, it was broken again and the service technician stated that its the magnetron again. I called to get it replaced and they said Whirlpool doesnt replace appliances, they just keep servicing it. **! How can they get away with this!

The washer constantly binds clothes around agitator. Truly a design flaw and it does not get clothes clean. So with a washer like this, I am forced to go to laundromat. Wished I would have paid 230.00 or so to have transmission fixed on old Kenmore. Truly dislike this substandard appliance.

Whirlpool Cabrio Purchased 12-7-2012 - what a piece of junk. Does not get clothes clean, rarely does she even spin out properly. Called because it kept walking across the basement floor. Informed that was the owners responsibility, not the store (Feidens in Latham). Always had good luck with them, bought all my appliances from them. Now I heard a loud bang and she threw up - water everywhere. What a mess.Had purchased special patio block at Home Depot to even her out and every time I used it which was not too often, it acted like the space shuttle ready to head down the runway! Not too happy with Feidens attitude with regard to this purchase. Not going to call them to fix it. Not an ready to pay to listen to their guff again. Expensive machine never worked well since it got here. I always wished for a Whirlpool, be careful what you wish for! Junk, nothing but junk. Only 3 years old and I only do laundry about every 3 or 4 weeks. Live alone, so she certainly was not overworked.

Purchased this beautiful sleek Cabrio washer in May 2012 from Appliance Smart, with its modern looking glass top, it looked so nice. The washer itself works ok for now, but it does unbalance a lot, thats not main issue. We deal with that. The poor design of holding that sleek glass top in is the problem. After a little over two years, it started cracking at the hinge that is just mounted in Plastic which holds the whole lid down, including the heavy glass. The glass started raising up, causing steam to escape. The lid is rubbing and very difficult to open. Appliance Smart is gone now.. We called the service repair person about 6 months ago, he looked at it, said its a problem that is not covered on our warranty and it would be approx $350.00 to repair!! So today, tomorrow or next week it will stop working because the lid is popping off! Its a terrible design, dont be fooled by its sleek look. The manufacturer takes no responsibility for this major design flaw. Beware, the very thing you need to be fixed wont be covered under warranty, lemon law, or just good customer service. We have owned several Whirlpool appliances and doubt that we will own one again, due to the way this issue was handled by Whirlpool.

Have had it replaced. It is not a great value. Need one with freezer on the bottom. Will buy another brand. Not 2 years old making noise and it sounds like someone pounding on the side after the doors are open. This is a side by side fridge and has space but I question when this will go out.

Bought a side by side whirlpool refrigerator last year. Door seal has come unglued so the door doesnt close unless press seal back in Every time we open the door. For the expense I would expect the door seal to last longer than a year.

I bought a Maytag front load washer on October 24, 2010. I have not been able to use it because it came damaged by the manufacturers. I contacted them by phone several times and it took them three months to send someone (A and E sears repair). Two months passed and I did not get the parts necessary or a replacement washer. I kept calling and finally they sent someone again in May 2011. They said they where going to order the parts because the new company was not going to replace the machine, even though it was already damaged. They said I would get the parts between three-five business days. I only got one part. A and E sent a repair guy again on the 22nd of June. This one said they needed the entire machine in parts and that he would order the parts. I called A and E one week later and they said they were waiting for the on manufacturer to send the parts (Whirlpool). The 26th and the 27th of July, I got the parts. On the 22nd of July, another repairman came and said we needed more parts. Today, August 16, 2011, I called Whirlpool and A and E and now they said the parts wont be here till after October 26, which by then I would have to pay for the parts and labor if I wanted it fixed because by then the one-year warranty would have expired. So here I am with a $700 washer, which was never used and they refused to fix/replace. They sold me a lemon!

I have a Whirlpool french door unit with ice & water through the freezer door. I recently noticed rust in the ice. When the extended service plans tech came to see it he told me that the ice bucket would have to be ordered. Almost a month later, I called him and was told that rust isnt covered. I understand that surface or cosmetic rust shouldnt be covered, but rust in a place where it can be ingested is different. Anyway, I called Whirlpool directly and a very nice phone rep agreed with me and asked her supervisor. Needless to say, I just sent Whirlpool a letter stating that I would pursue this through legal channels if I dont get satisfaction.

I purchased a Whirlpool Cabrio on October 27th, 2010. The Cabrio is always giving me the UL code, which indicates the load isnt in balance. Ive been doing laundry for 27 years. I know how to load dirty clothes into a washing machine evenly. Sometimes it will take me all day to do one load of laundry! Seven months after my purchase, my Whirlpool Cabrio washing machine started giving me the F51 error code. I called the phone number on my Lowes receipt for warranty work. Two weeks later, I finally had my washing machine running again. I was happy and thought Id only have to deal with the UL code. Boy was I wrong?!Now Im two weeks away from my warranty expiring. Im getting the F51 error code again! This washing machine is an $800 piece of junk! Hopefully, I can get the Cabrio repaired before my warranty expires in two weeks. I do a lot of laundry. We are a family of six. So, I know Im hard on washing machines but come on. Shouldnt an $800 washing machine last at least two years? Im not even a full year into owning this junky washer and Ive had two breakdowns! In my opinion, this washing machine needs to be recalled and people need a reliable replacement or refund.

I have had this range for approximately 4-5 years with no problems. The design and efficiency are great!! I would recommend this brand to anyone and would purchase it again myself. It has an extra burner just for warming which I love.

I just replaced our Whirlpool Accubake Double Wall oven, model RBD305PDS14, because it fried the control panel after being put on self clean. This was the second time this has happened and I have probably only used the self clean feature three times since we purchased the oven. Im not a specialist in defective product design, but having a control panel burn up two out of three times when the self clean is used suggests a significant problem. I refused to pay to have it replaced again and obviously did not replace it with another Whirlpool product or any other brand associated with the company. I see that this problem has a long history dating back quite a few years with Whirlpool doing little or nothing to resolve the issue. (They just deny any knowledge about any defect in the design.) Fool me once, shame on you! Fool me twice shame on me!

I did not purchase it, the stove came with the house. I like the flat-top... easy to clean. I dont like that any little spill causes a stain that has to be cleaned. I didnt shop for this one. Although I would have this as an option if I was shopping. Low quality would be a problem. I want my stove to last a very long time. But, I dont want to pay a lot of money for it. I have a Whirlpool, glass top (smooth top) built in stove. I dont know the model. It has 4 electric burners, of 2 sizes. It has dials to control the heat amount.

My gas hot water heater failed. The pilot went out and could not be relit. The Whirlpool water heater has a 12 year warranty and we are in year 5. Sears said they could not send anyone to repair it because there was no service in our area. We live 30 minutes from Dallas/Ft. Worth, Texas. They offered to replace it even though I had a plumber on standby, ready to replace it. They said they could not let me do that if they had one in stock. After waiting a week for the delivery, they called at 4:45 pm to claim that the delivery truck would not start. They would not put it on another truck or help in any way. Then they said it would be another week before they could deliver it. All this time we are going without hot water, trying to cook, clean, take baths, do laundry etc. They had no sympathy and refused to provide compensation so I could proceed with installing a new water heater. I could have done this if I knew a check was in the mail but they refused to allow me to do this. This happened to me at another big box store years ago and they sent a check immediately. The customer support in the hot water heater dept at Sears was terrible. If they cant send someone to repair and they cant provide a replacement within a few days, it is only reasonable to offer payment so that the customer and move forward with repairs. I will never buy another appliance from Sears after this nightmare. On December 4th Im supposed to get the delayed hot water heater but if the truck doesnt start, who knows how long I will have to wait. I am reasonable and flexible but lack of hot water is something a customer should not have to wait two weeks to get resolved.

We purchased a stainless steel refrigerator thinking Whirlpool stood behind their product. Within days, the shelving on the door and meat bins and vegetable bins literally started chipping away and cracking. I have over a thousand dollars product held together by glue and duct tape so I can use my refrigerator. Neither Lowes or Whirlpool wanted to back their product. But it seemed they wanted to make a sale only on replacement parts... Now today I have learned my ice maker drum has chipped away... Thankful no one swallowed the plastic. We will never buy Whirlpool or recommend to our friends again.

Purchased a Side By Side refrigerator just 16 months back and this is the Third time the ice maker has failed. Who makes JUNK like this?? Is there not One company that can make anything to last at least three years. I am disgusted with the junk we bought that has Whirlpool on it. I should Sue Home Depot and Whirlpool for Fraud.

Purchased Whirlpool Cabrio top loading washing machine yesterday. When wash load is finished (dark load) white marks are visible on the clothing. It appears to be laundry detergent that has not dissolved. I am not happy with this washer and will be returning it.

I purchased a GW399LXUS Whirlpool Gas Range. This is the slide in kind. I paid 1658.00 dollars for this stove, because it was a gas convection oven. We purchased it on 7/21/09. Just yesterday, the keypad numbers stopped working. I cannot even set a temperature for the oven. So now, I can only use the burners. I called Whirlpool today. They told me that my stove does not have any recalls so there is nothing they can do about it. I spoke with Jessica in Michigan. I told her how dissatisfied I was that the stove is only 2 years old and the most important part (the buttons) stopped working and they only cover this for one year. She told me that I have to remember that man made things are made to stop working at some time. I told her they should work for longer than 2 years. I remember way back when my parents bought a stove or fridge and they lasted for 15 to 20 years before breaking or stopping to work.I am a long time Whirlpool customer and always had good luck with their products. But I really feel that they should fix this problem. I could understand if the stove was 8 or 10 years old and something broke after using it, but not after 2 years. I will definitely tell everyone I know to not buy Whirlpool or Maytag since they are one in the same. I probably will not buy Whirlpool again and will have to buy something from Japan since it will last longer. So much for buying American made junk!

We have been very satisfied with the way our dishwasher has performed over the years. It cleans the dishes well. It runs somewhat quietly. It doesnt seem to use too much detergent to get the dishes clean.

I purchased a washer and dryer through Best Buy. I had already decided on what I wanted and have purchased Whirlpool appliances in the past including washers and dryers. I tried other brands and was disappointed so I wanted to go back to using Whirlpool w/d. I was encouraged to purchase this set because it was on sale. Worst mistake I ever made. I am so disappointed! I wish I could go back and do over. I would have gladly paid more for what I had wanted instead of saving (supposedly) a little money. I personally think they were trying to get rid of these models because they are awful and I have had so many problems doing a job I already dont but this set makes it worse. The washer is constantly off balance I think because you have to be so strict in how you lay in the laundry to the washer! Now the dryer takes even longer to dry my clothes than my twenty year old set (Maytag) which wasnt that bad. Is there any kind of trade-in I could do model: WTW4900B to get the set I really wanted (the models with glass top on washer and glass door on dryer)? I purchased this in April 19 of 2014. I hate it!

I purchased this machine in February 2019. The standard one-year warranty covered the first service call less than one year later. This call was related to the main control board. If this part goes out it will prevent the washer from advancing through the cycles. A technician was able correct this problem by resetting control board. That was sometime the first year. The next call was for the same problem and it cost me $90 to have a technician reset the board again. I then learned how to do it myself through online research. However, I had to do it more regularly and this got old as you can imagine. I did buy myself about two months of time by purchasing a used part but it soon failed as well. This main control board cost $564 if you get it from the manufacturer. This exceeds the cost of the machine. It was purchased in 2019. (The same machine has gone up to $740 today.) I had no other problems with that appliance however, it appears nowadays with electronics taking over cycles vs. mechanical parts you will not enjoy the same longevity as I did when I got 16 years out of a GE washer before this one. I have replaced this machine with a competitors product that costs less than the part except for the 5-year warranty from Lowes.

I purchased a Whirlpool Cabrio washer (WTW6500WW1) on 9/11/09 for approximately $800. Now three years later, it needs a new rotor and stator costing $470 in parts and labor. I called Whirlpool and was told I could get no help with the cost of parts because of the age of the machine! A simple Google search of the F51 error code that I am getting will show you that these machines are $800 pieces of junk! I am not repairing this machine. I am going to run it until it dies and simply buy a new washer. You can bet your sweet self it will not be a Whirlpool! I can only hope to inform enough buyers about this to keep them from the same fate.

Bought a Whirlpool French Door, Bottom freezer mount appliance from Lowes in Jan 2014. Model WRF990SLAM00. Jan 2015 the freezer part stopped working. Whirlpool approved repairman came and knew exactly the problem because he was aware of this being a consistent issue with Whirlpools. He contacted Whirlpool and they quickly agreed to send repair kit for FREE. Took 2 wks for parts to arrive, and neglected to send along required tool/gauges for repair to occur. I called Whirlpool C.S. and they claimed they knew nothing and said our fridge was on no problem list. I had repairman call Whirlpool and they claimed appropriate tool/gauges are no longer available! This fridge is only 1 year old!!! Now we are completely ignored. Whirlpool will not even talk to us about help of any kind. HORRIBLE customer service!!! Crappy appliance! After thinking our Whirlpool appliances were a good investment, I will NEVER EVER BUY WHIRLPOOL AGAIN!!!

I purchased Whirlpool washer in 12/2011. Immediately, I noticed the noise and called service. It was a whistling noise. The clerk told me nothing was in the manual and it would cost $65 to have a tech come out. He advised me to wait until it was louder and more consistent. I called again when it was. Gear case was replaced on 5/2/2012 five months after purchasing the machine. I called Whirlpool again in 5/2013 - same problem. I was told the diagnostic call would be $95, labor which is extended for a major job is $85 and the part would be $290. It would cost $470 to repair as the gear case was guaranteed for only three months. This machine is a lemon since the gear case is now shot again prior to the machine being 1-1/2 yrs. old. I called Whirlpool and spoke to Amy (Esc. Sup.) who advised they would replace the part only. The appointment was scheduled; the tech came, did diagnostics reading a manual and said the gear case is shot. I inquired, Well, you are going to fix it today right? The reply was, Oh no, it has to be ordered and its a two-man job. When I arranged for this appointment, this was clearly explained and what I was expecting, two men and the part to be replaced with them. Now its a five-day wait to get the part and then a scheduling issue when they could do it. This machine is a lemon and Id like to have the machine replaced or my money refunded. This is a runaround, scheduling the appointment and having someone show up with the manual and having no parts and not knowing that it was the part which broke again from previously being replaced.

We thought we were going to love it. It has two bottom freezers so the capacity is fabulous, but the ice maker location subtracts shelf space. Love the French doors, but we can never find anything quickly. The biggest issue is the popping noises it makes that are sleep stealing in the night.

Purchased water heater in 2005 with a lifetime warranty. We had our first problem May 30, 2013. Water would not heat above lukewarm. Called Whirlpool. Our plumber and Whirlpool determined that the temp sensor was defective. Plumber took it off and it appeared it had shorted out as the wires were black and plastic coating had slightly melted in one spot. We had replacement part in 24 hours. Licensed Plumber did repair (2 hours @ $75/hr = $150). Second problem occurred October 23, 2013. Not even 5 months later! No hot water. Hit reset button, turned temp up. No change. The diagnostic light on water heater indicated it was the same problem as before. Called Whirlpool. They sent out repair part which arrived in 24 hours. Licensed Plumber repaired (1.5 hours @ $75/hour = $112.50).I took a picture of the melted plastic caps where the wires screw into, of the housing around the wires, of the melted, charcoal crispy black of the Junction Box in the area that was directly above and covered the wires and sensor panel. It was much worse than last time. Plumber said that the part that screwed into the plastic cap had to be pried out and it broke off. You could see that this might be the spot where the problem started. We feel fortunate that we didnt have an electrical fire start from this problem. Something isnt right. Within less than 5 months, we have spent $262.50 to repair a water heater that has a lifetime warranty. Id like to give this 0 stars. Whirlpool owes us $262.50 and it might be more before this is all said and done.

WHIRLPOOL MICROWAVE HAS HAD MAGNETRON GO BAD 3 TIMES IN 1-1/2 YRS! I bought a Whirlpool Microwave Hood Combo Oct 2009. July 2010 the magnetron went in it! December 2010 the magnetron went in it AGAIN! This time we had to pay the labor to have it repaired because it was 2 months outside the warranty period. We did not want to pay because we knew having the same part go twice in one year that something is wrong with it. Whirlpool told us that if it happened a 3rd time that they would most likely replace the appliance for us. Well....July 2011 the magnetron went AGAIN for the 3rd time! Whirlpool told us to take it to a licensed shop to have it diagnosed to prove that it was the same part as the previous two times, fax paperwork from the prior two times, and have the shop call in the diagnosis of the 3rd time. We did all that, and they told us they wouldnt do ANYTHING for us because it was outside of the warranty period! Well they knew that when they told us we had an opportunity to get it replaced! THE SAME PART WENT BAD 3 TIMES IN A 1-1/2 YR PERIOD OF TIME. We trusted that the Whirlpool representatives were being honest with us during those phone conversations. Whirlpool can not explain why representatives would give us hope of a replacement (although each conversation is documented by their login and employee ID number). So not only did I buy a brand new MSRP $619 microwave, I paid to have it repaired the 2nd time, and to have it diagnosed the 3rd time, uninstalled and reinstalled the microwave each time, the inconvenience of not having use of the appliance during each occurance, and the unbearable suffering of calling in to customer service and repeating the story over and over to each representative. My house is brand new (we moved in to it November 2009); we bought ALL our appliances from Whirlpool. All I get for an answer now is sorry. That doesnt help me any financially having to repair and now replace an appliance that has been in use for only 1-1/2 yrs! I have seen $39 microwaves from WalMart last several years, so what is wrong with Whirlpools manufacturing?! Customer Service is unreliable, untrustworthy, non-sympathetic, and insanely frustrating! My question for Whirlpool is...why cant you make a product that lasts better (better quality=longer life=healthier environment and happier customers)? Why cant you stand behind your products better? Dont you care about the impact youre making on us emotionally, financially, and environmentally? The model # is GMH6185XVS0 Serial # is TRY3111264.

I have had my refrigerator for a few years now. When I first purchased it, it was because of the brand and the looks. As far as performance it runs just as good as any other less expensive ones.

Oh what a tangled mess you weave! Inappropriate water usage and bad agitator. The brain is not flexible. Most of all it locks me into a contract of this is it, do or die, you have no other options but to start again. It puts my clothes in abused mode! I say no more, taxes will bring me to buy your competitor. It is very large and way too heavy to move anywhere. No!!! I will never buy another. To the point with all required letters involved, No I will not recommend this (Cabrio washing machine) to anyone, or give it to a friend!

I purchased this Whirlpool Cabrio washer three months ago from hhgregg. If I hit the lottery, the first thing Im going to do is take it to the dump and buy a new washer. There is no way to wash a load of towels in this machine. I started a load at 7:35 this morning and it is now 9:53 and Im still dealing with the drain and spin cycles. Over and over, I try to get it to spin out enough water that I can put the towels in the dryer. I should have suspected something when I saw that the washer even had a separate drain and spin cycle. It should have told me something. Its a piece of junk. Never again. Im back to Kenmore.

I purchase this machine over 15 years ago. It’s still working, washes the clothes. The only problem the section where the bleach is poured is completely rusted out. The machine has definitely lasted beyond the 15-year cycle. I intend to purchase a new one. I probably would buy the same brand.

Purchased an expensive, Cabriolet Washer in 2014 to replace a well used Kenmore washer. Sucked into the, Whirlpool is a good brand and spent more than I would have. Lid lock fault started about 3 months ago, googled fix and found this to be a very common problem with this brand. Have been able to override and reset it but it is very frustrating to deal with. Called in a repair person this morning who, for $140 told us we had a faulty lid lock and for $360 he would replace it. I contacted Whirlpool and asked if they were aware of this very common complaint (just google it) and they were not but offered to make a record of mine. Please do not buy Whirlpool. Very disappointed with their product and their response.

Doesnt wash clothes properly - often some items of clothing just dont get wet. After 3 years the whole main bearing in it failed, causing unbelievable noise and constant overload faults. All Whirlpool top load washers have this critical design fault where water leaks into the main bearing (the bearing is an unsealed type with a cheap grommet seal) and then after a year or 2 the bearing starts to cease and the machine overloads itself trying to operate. Replacing the bearing means pulling the whole machine apart - and with a cheap press-fit bearing like this, special tools are needed and it will never operate smoothly again anyhow. In any case in 2 years, the faulty bearing seal design will let water destroy the bearing again. Effectively it is not repairable. Sounds like class action to me. So, it became an $1000 paperweight and I bought a new Samsung unit. I assume the Koreans know how to design bearings and seals...

Good Morning. We recently built a home with Pule in Nexton, which is located in Summerville, SC. The appliances we chose came with the dishwasher, stove and microwave. Everything other than the dishwasher has been doing great, but as for the dishwasher I am extremely upset...we are newly weds and received two nice sets of glass and at least 12 of them have been broken in the dishwasher. Please advice.

If I fix this washer I will have been on 3 motherboards in the 5 years I have owned this machine. That is inexcusable and indicative of crap quality control and manufacturing process. I should not have to replace the control board at these intervals or, within 5 years, at all. I will never touch another Whirlpool appliance again.

I bought my Whirlpool induction stove several years ago. We normally use a toaster oven for baking as we are only 2 in our home. Last year I decided to cook a large turkey for the family. I threw the turkey into the oven and started cooking it. After an hour or so I decided to start cooking the potatoes etc on the stovetop portion. My potatoes started cooking and my element shut down. I did everything I could to get it going but finally resorted to the manual to see if there was a suggestion. The suggestion was that the oven had heated the burners too high and that I had to shut off the burners and wait for 5 minutes and try again to use them. The oven was only cooking at 300F. I waited 15 mins to get it running again. The stovetop went out once again and I had to stop cooking. Conversely Ive had the same issue with the oven. Ive been cooking in the oven and have had it shut down as a way to address the stovetop being too hot. How am I suppose to cook on this unit with any kind of confidence? I did an online chat with a rep today and they suggested getting a technician over to the house. I was told I could pay $129 to have them look at it. This is obviously a design flaw that I was never told about prior to my purchase and would never have bought had I known. Shame on Whirlpool!

Bought expensive fridge 2009. Now (2015) random very loud rat-tat-tat sounds lasting 5-10 seconds. Very loud. Paid for repairman to evaluate. He said it was probably compressor spring and other springs would probably soon break and would shut down fridge. Said it is very expensive to repair and it would be best to dump the fridge and buy a new one. I called the 800 number located inside the fridge. Jacob at Whirlpool listened to my story and said, Yep, it sounds like the compressor spring and the other springs will likely break. He said he can make me a one-time offer of a full repair of the compressor for only $359.65. We pay Whirlpool and they will have a local guy here come and fix it. We paid by visa.And, via email we get a document that shows we just bought a service contract. This is a surprise to us as we were told were paying to have the compressor repaired. In a few days, a call comes from local repair shop. Guy says, he will come out and check out the noise and see if he can repair our unit. We tell him the noise is intermittent and we cant predict when the noise will occur. We also tell him Jacob from Whirlpool said it was the compressor and that we paid to have it repaired. He says it doesnt sound like it is the compressor and that he cant diagnose the problem if he cant hear the noise. We tell Maytag/Whirlpool via phone we are faxing formal request for refund of our $359.65. Lady from Whirlpool says we, should get a refund in 4-6 weeks. Well, we will see.We are very disappointed in the the short life of our very expensive fridge and we are disgusted with the false and misleading comments made by Jacob of Whirlpool. He told us we were paying for the repair of our compressor and instead we get a stupid service contract. We are in the process of buying a new fridge. And no... It will NOT be a Maytag/Whirlpool!

I moved down to Florida in March of this year. I have always owned Whirlpool appliances and wouldnt think of buying another brand...... till now. I purchased in March a new washer and dryer set washer model #WTW4800XQ4. The washer is so noisy that I cant watch TV while its running (what a piece of junk). I asked when they installed it if there was something wrong with it and the gentleman from H&H Gregg said no, they all sound like that. I guess if you want quality you have to buy Japanese.... HOW SAD.

Purchased this machine in Jan 2012. From the start, dark clothes came out with white streaks on them. Thought I was doing something wrong - kept using machine. Then started noticing my whites coming out looking very dingy, light tan stains on them. Called Whirlpool and was told to use Affresh tablets to CLEAN my washer - why should you have to clean a washing machine?Several weeks ago noticed machine getting very loud during spin cycles - and I mean loud! Sounds like a jet engine taking off in my basement. Called repairman - he listened to my machine and said noise is the bearings, seal not fitting properly around bearings and the grease for bearings is slowly leaking out into my wash cycles. Explains the dingy whites and spots on darks. Said he just worked on a Cabrio with same issue - had to rebuild seal and bearings - about a $450 job. After reading all these reviews, decided not to attempt to fix this machine. Going to scrap it and start over. $900 for 3 yrs of an inadequate washing machine!! Whirlpool should be made accountable for this inadequate product to all of us consumers who threw away hard-earned money. Reading up on the Speed Queen agitator model. Lots of good reviews. Think I will go back to the old tried and true way of washing clothes.

I purchased top load washer and dryer from Lowes last week. When I was washing clothes the first time 12/4/18 (the day Lowes delivered) I washed in quick wash setting, machine was showing me all stages of the wash on the progress lights. It took about one hour for one load. Today 12/11/18 I spoke to your customer service associates Trina regarding the issue with my top load washer wed4815ew1 serial m82572023. I was told a technician is schedule for repair tomorrow. I try to quick wash two loads, washer progress light only went to wash mode only. I had to press start/pause, select drain and spin to remove excess water. I started 8:30 am and finish around 1 pm. I was waiting for the cycle to finish, twice all progress stages light went blank. I have no idea when it will be done. Machine made noise, not spinning, no water in it. The dryer wtw4816fw2 serial c84621285, I dry at energy prefer setting, when the clothes was dry, dryer continue without the buzzing signal to stop. I had to keep watch of the time and turn it off manually so it not energy efficient when I have to monitor when clothes will be dry.

I purchased the Whirlpool Gold OTC microwave model #GMH6185XVQ on November 29, 2010, and it was installed on December 26, 2010. After 18 months, the Magnatron went out. Its just me and my husband, and we eat out most of the time. So, it wasnt used a lot. I called Whirlpool, and Sherrie could only say that she feels my frustration. No, she doesnt. She has no idea. I just purchased $4000 worth of Whirlpool appliances, and now, I have no idea if they are going to last. It is a piece of junk that I paid good money for. In this day and time, we have to watch what we spend. I think Whirlpool should be a stand-up company and admit to taking our hard-earned money for a piece of junk. Dont they realize that its going to hurt their business.

I purchased the GBS309PVS single oven in Dec. 09 along with a Whirlpool Gold microwave, dishwasher, and stove top. The oven was dented and scratched, so another one was delivered on 1/10/10. I finally decided to use the cleaning cycle in Oct. 10. It burned out the circuit board and something else. It was under warranty and repaired. I was afraid to use it again, but tried it yesterday, 12/27/2011. It smelled horrible, knocked the power out of the oven, and the door will not unlock. Customer service was not very kind and said that I had to purchase a $269 warranty and they would send someone out. I did, unwillingly. Well see what happens on Friday. If this is not resolved, I will go further. This is a faulty part of the manufacturing and should be handled as so.

Whirlpool fridge (model no ETILFKXKS) - I purchased this fridge from a very good dealer (Trail Appliances, Edmonton). Within a year, I had my first of the frozen water drain from top freezer to water pan. Of course, I blamed myself - too much warm food, blah blah. Now this is happening more and more often. The fridge is kept at number 1 of 5 for coldness. All foods are left on counter to cool, but three times over my Christmas holidays this year when I swore I would throw this fridge in the garbage - the drain froze, water all over the fridge, food having to be removed and placed in other peoples fridges, blah blah. Now it did it again this weekend! There are only two living here. I work all day and no one even opens the fridge much and again this happened. Im really sad that such a faulty product (too much insulation hiding the drain pipe behind the fridge and it must be much too small in diameter; otherwise, it wouldnt freeze up). Talking about work. We have two fridges there with 50 people using them all day and they run perfectly for the last 8 years that I have been there. So I think it indicates that my fridge is faulty. Im so sad too because I dont have the money for a new one. I just turned 65 and am about to retire (single mom). You would think that a $1,300 fridge would last longer than 6 years!

Whirlpool dishwasher Wdt790slym1 - This is the worst dishwasher I have ever bought. The top rack assembly is made of all plastic and started falling apart within 13 months of purchase. I have had to order the same replacement parts numerous times and have reached the end of my patience. Buyer beware!!

I purchased a Whirlpool washing machine (new) in 2004. From the beginning, I had problems with the spin cycle. I phoned Whirlpool. I paid for service with no reimbursement. With the costs I have had for service, I could have purchased 2 machines. I have had to go to Laundromat to do wash then come home to dry. I have for 30 years only purchased Whirlpool large appliance. My washer and dryer were always refurbished but they were Whirlpool. I have had a (refurbished) Whirlpool dryer since 1997 with one (1) service call. However, this wash machine, purchased new, has been a money pit and a piece of trash with Whirlpool only giving lip service when calling. Also, going to the Laundromat, I have been amazed at how many individuals I speak with are there doing wash because their Whirlpool washer, mostly even newer models than mine, do not work! And they have the same story. There’s no service when you call. Shameful Whirlpool! Buy your parts from us. Maybe your credibility could be restored. But I will never purchase your Whirlpool or other names under Whirlpool! When I do get another washer, yours will be put on my front lawn with a large sign of your disgraceful products and service!

Whirlpool Cabrio Washer - Sucks. I purchased it when I purchased my house. After having the washer for a year and a half it stopped draining and wouldnt spin. I paid $75.00 for the service call from my home warranty and thought that I was good to go for a while. But here I am a year with the same problem. I will never buy another Whirlpool again.

Four years ago, we remodeled our kitchen and purchased the Whirlpool Quiet Partner II dishwasher, with a one-year service warranty. To be fair, we have not had a problem with the operation of the dishwasher, but rather, the quality of the dishwasher. Within the first two years, the front panel of the dishwasher started turning brown and rusting through from the steam escaping the dishwasher. The labels on the operating buttons have peeled off, again, from the heat of the dishwasher. The upright spokes on bottom tray, that hold dishes and etc. in place, started rusting through and breaking off. Guides which allow top drawer to slide in and out and hold drawer in place, have weakened, so drawer is constantly dropping or sagging.I have had other dishwashers that have certainly lasted more than four years but was encouraged by a Home Depot salesman that this was a great machine for the price! I should have paid closer attention to that for the price part. In any event, I called Whirlpools customer service department, believing that in this day and age, SOMETHING could be done to help with these issues and was told, quite succinctly, that there was nothing Whirlpool could do. I asked about standing by the integrity of their product and got no response to that either.I am an associate with American Girl, a company that stands by the quality of its product FOR LIFE. To be told by a customer service rep from a much larger company, that there was nothing they could do to help me, completely blew me away. I have taken pictures that are pretty indicative of the quality of this dishwasher and will be going online to warn other consumers against purchasing Whirlpool products.

I have owned Craftmaster 30-gallon hot water heater and the only things reliable about it is trouble and aggravation. I purchased this in 2004. I have had to replace the controls, valves, wires, etc. three times in 10 years. And Im now looking at doing it a fourth time. The design of these parts are utter crap! Cheap plastic! After replacing these parts, this hot water heater works great for a few years, then invariably starts acting up. The pilot light goes out when the heater is supposed to kick on instead. Getting the pilot light lit again, is an exercise in futility! The red reset button once released, immediately extinguishes the ignition flame. Supposedly, after holding it down for 1-2 minutes allowing gas to build up, it should light the coils... and if it doesnt, youre supposed to wait 10 minutes to try relighting again. You can repeat this process for 12 hours, and if you finally do get this temperamental piece of junk to light, youre lucky. Customer Service has been useless in assistance. All they want to do is send you e-mail, and get you off the phone. Not to mention, Ive been told by many a rep that the hot water heater extinguishes itself, if water is overheated, and that it must be my fault for setting the temp too hot. Baloney... Ive been told that the underside vent must be cleaned every few months, so that air flow is accurate. Makes no difference one way or the other. And recently, Ive been told by a rep, that my 40-yr-old house likely doesnt vent exhaust out through the roof properly. This product is inferior and unpredictable. Its great when it works, and the pilot light stays lit. God forbid it ever goes out though! It is next to impossible to relight. I have spent more money on service technicians attempting to repair/replace parts, than it would have cost to simply by a new hot water heater. I miss the old days, when it was easy to light a hot water heater: Strike a match, turn the gas on, and instant hot water. No muss, no fuss. Having owned many properties w/ hot water heaters over the years, I have never encountered such repeat problems, as with this product. Its simply not reliable, and not worth the $$$. Never again, will I buy a Craftmaster Product. And I had no clue that there was a Class Action Suit filed, and a settlement involved in these faulty units. Whirlpool/Craftmaster should have notified everyone, who purchased one of their units. Now Im stuck w/ a constantly broken unit, and zero recourse. I will never buy anything Whirlpool/Craftmaster again, as a result.

This started Sept 27 2017 when the ordered online electric range 30 inch slide in oven Whirlpool brand was delivered. When using the oven, a noxious diesel smell filled my home, despite multiple attempts to burn in the unit as advised. 10 days later after still trying to burn it in fumes got worse. I called corp who then sent over a tech to look at it and the tech shared with me when he arrived that he was the wrong person since he cant smell due to an old injury! He admitted he smelled a chemical when it first went on but it went away for him but might have went away due to is impaired smelling ability. I called Corp back and they totally agreed something was wrong with it that could not be repaired and the unit should be picked up and I should be paid back that day it is picked up. They said in a few days which later turned in 2-3 weeks out and counting... I filed a complaint with the BBB due to the ongoing issues. Corp office said they would pick up unit and at that time hand deliver me my refund in full. At first the pick up was weeks out but after BBB was notified they came yesterday 10/18/17 and removed unit, but no check! I called Corp again this time asking why I did not get my money as they promised she said someone dropped the ball, and that someone should have told me that since they had to get someone non-local to get it that they will mail me the check in 14-21 days! She said I see in the notes. They told you they would hand deliver you your refund so they should have called you about the change.So here I sit... No oven in use since Sept 18 and no money back to buy one for weeks yet. I have never been told, despite my requests as to what the chemical was that I was burning off in my home and exposed my family to over 10 days which we had headaches and nausea from (despite windows opened and fans going at full blast). Only that it might have come from the manufacturer or process. This company isnt the only one who has had issues on occasion with a defect in this never-ending chemical smell but the lack of regard of my safety concerns and failure to stand up to what they offered to do (poorly handled response) is simply wrong and bad business. I have not dealt with Whirlpool regarding matters ever and have very little of their products in my home so unsure if this is unique or standard with them. I wont buy their products anymore because I am less than very dissatisfied with my experience. I may have been the only unlucky person having this kind of response from this company but felt the need to share.

We bought this dishwasher 3 years ago and have had nothing but trouble with it. Our friends bought one just like it the same day. It basically runs when it wants to. It has really been a pain. We also bought a refrigerator about the same time. The ice maker builds up frost and you cant get the ice to dispense. We are very disappointed in these products. Had a Hotpoint dishwasher that lasted 25 years and was still working when we replaced it with this one. Our Amana fridge was still working when we replaced it. Just needed new seals.

I purchased a Whirlpool Gold top freezer refrigerator (G2IXEFMWQ03) in May 2011. Six months later, the freezer began to collect frost and eventually clogged the refrigerator port from freezer. Since cold air from the freezer was not going to fridge, I had to turn down the refrigerator temp to lowest setting. I had a service person come out and replace Adaptive Defrost Control under warranty - it would have cost me around $250. Now roughly 12 months after repair, the defrost issue is back. The part cost me $175, and that is if I install it myself. I called and mailed Whirlpool which was a waste of time. This is the last Whirlpool I plan to purchase. For the same issue to occur in this short time span, it has engineering flaw written all over it.

This machine needs to go back to the engineering dept. There are too many engineering defects to mention. My Cabrio washer and dryer was delivered October 11th of 2017. It is just my husband and myself so laundry was scarce. I have been unhappy with the washer since the beginning and just recently decided to try and solve the problem. I contacted Whirlpool first and was told these machines have great reviews and nothing is wrong with them. When I started describing the flaws, there was one excuse after another and the person from Whirlpool blew me off. The flaws... all begin with not cleaning which is caused by design. The water level, even with the deep water setting, does not even cover the amount of clothes in a small load; the agitator is so small, there is no effect on agitating the clothes; even with using a SMALL amount of HD detergent, there is always soap residue on the clothes because of the lack of water; and last issue but not final is the load going off balance. The machine will walk all over and error codes according to the repairman need to be cleared so must call if it happened again. Well, the very next load it went off balance again. I did not call because I would have the repairman living with us and I am not willing to set up a bedroom for him or feed him. So, Whirlpool does not care if their product needs redesigning, they only care about selling their product and then the consumer is on their own. Basically the same train of thought from Best Buy where we purchased the machines. Best Buy would be happy to sell me another laundry set... per the store manager but that is all he could do. Will I purchase from Best Buy again... I think you know the answer to that. If they cannot stand behind a product they sell, then they can keep everything they sell, no more money coming from my checkbook to them ever again. Someone, whether the manufacturer or the retailer, should be willing to stand behind their product. But, no one cares. Bottomline, do not believe the ratings on the Cabrio washer. This machine has design flaws that cannot be corrected.

I bought it on 11-24 13. I called Whirlpool on 1-29-13 and got no response. I called 3 or 4 times and still havent heard from them. Its now 4-1-13 and still nothing. I tried many times and got the runaround from them. They owe me money for repairs to the heater. I will not ever buy from them again. Just thought you all should know about this.

Our refrigerator is only 18 months old, a Whirlpool Gold gx5htxvyo5. It was sold to us believing it was stainless steel. There is no way scratches come from nowhere. We have a Whirlpool dishwasher and stove in stainless steel. You cant compare how much better they are. Im very dissatisfied. Wed like to have new doors. Something is very wrong with the finish on these doors.

Just want to pass on update on my dryer situation. Purchased a Whirlpool WGD4900XW1 3/9/13. The motor went out 6/22/15. Now Dec 2016 the replaced motor went out again. Whirlpool says... So sorry, we can get you a discount on a new one... ABT is giving me a break on the part so I am going to go ahead and fix it one more time. I assume in another 18mos I will be looking for a new dryer! DO NOT BUY WHIRLPOOL DRYERS. THEY ARE CRAP!! My brother also purchased a Whirlpool & it died about the same time.

2 yrs after my landlord installed WHM31017AW1... Whirlpool oven stove microwave. The door cracked then another crack and pieces from door fell on stove. I removed all loose pieces then glued all cracks & loose pieces on door. Landlord thought door was being closed too hard, silly. After all reviews same, not buying replacement door but having different brand installed.

I have a front load washer by Whirlpool and a motor stopped working on the drain. When I called them, they told me it would be $200.00 for the part. I dont understand why they dont stand behind there product. What can be done to make these people fix there stuff? This is there product, if they cant do it right, then find a new job!

We recently purchased a Whirlpool fridge, model WRT138FFDW and are very disappointed with a couple things. First of all, the refrigerator arrived with a broken shelf. Although it was no problem getting a replacement, we found out quickly that it is very hard to balance things on a wire shelf. Water bottles and the like fall over. It is completely our fault for not noticing when we purchased, but just giving you a heads up that it will be a pain for you. Secondly, the sound of the fridge is very loud. It truly is driving my wife crazy. When we called Whirlpool, we were told that if they come out to take a look and the part is not under warranty, we would be charged $129. It is a brand new refrigerator, how can some parts not be covered??!! On a positive note, it does keep things cold and the color white is nice. I will not be purchasing any more Whirlpool items for my home. Bad fridge and customer care!!

Weve had this washer for about 9 months now. We noticed that the loads being washed small or large werent coming out clean. When wash cycle finished items were covered in soap residue and or had large dry spots where water had never touched the area. When our sheets were washed in bulky/sheet cycle and deep water this happened. Maytag sent out repair person to find the water pump went bad, pump was replaced. After repair same bad washing results as stated previously. Maytag then sent out repair person for the second time. This time the main electrical board was replaced. Still after two repairs wash loads are still coming out dirty, soapy, dry in spots in any of the selected wash cycles large or small. Third call to Maytag and a third scheduled repair date coming up in a few day. Over the phone the Maytag employee only words of wisdom was, Did you buy the extended warranty. So unless there is a third failure I believe that this washer is just a poor design.

This Whirlpool is great with a side by side refrigerator and freezer. I love the ice maker and water on the freezer side door. The refrigerator keeps my veggies and fruit fresh and crisp. Has a water filter purification that makes the water taste like mountain spring water.

We purchased the Top Loader Cabrio in 2006 for $1100. About 1 yr. later it just stopped, but was covered under a recall. A year later it stopped working again and cost $400 plus we bought a 3 yr. service contract for $350. A few months after the service contract ended, the spin cycle got very loud and it started leaking grease and water. It now need a ball bearing and $600 of work. So now we spent almost $2000 for this washer in 8 yrs. Our Maytag was $400 and lasted 15 yrs and we gave it to someone else who is still using it and we never had it repaired. It sounds like Cabrio customers have been complaining about the same issues for several years but they keep recurring and Whirlpool is doing nothing to correct them. We are not putting more money into it after reading all the complaints. We are buying another washer and another reliable brand. I would have been a customer for life because I did like the way it worked and cleaned, although I hear so many people had problems with that so I am not waiting for that to fail too. And I recommended the Cabrio to several people who bought them and now I hear they are starting to have problems. You should stand behind your product and correct these problems and recall or fix them at a reasonable cost.

My first time with Whirlpool (Always had GE) but at the suggestion of our builder, we went with Whirlpool and the stainless steel is horrendous. Nothing will clean it or make it look STAINLESS. My refrigerator, dishwasher, double oven, tall vent all look terrible no matter what I use! I have never had this problem before. Im embarrassed to have anyone go into my kitchen...

Right from the start of buying a new suite of Whirlpool appliances, the light over the range burnt out. We figured it was just a bad bulb so we replaced it. Soon it burnt out again, replaced it again, then again it burnt out. I finally called Whirlpool about the problem and found out it is the electronic panel that needs to be replaced... Of course at a full charge to me! I am so over WhirlPoo, (yes I spelled it that way on purpose) every single appliance has had issues. I have just lived without a light over my range because fixing it is more expensive than buying a whole new microwave. Never again will I buy any WhirlPoo appliance!

Completely disgusted and angry with Whirlpool! We own a Cabrio and just after 1.5 years of owning it the stupid washer has broke down. It wont spin or rinse or wash! Pretty sure its the bearings as I have seen several peoples complaint about this same issue! I contacted Whirlpool to only be told that they only offer 1-year warranty and after that the consumer is out of luck. They only stand behind their products for 1 year and after that its on you! They refused to help me in any way including sending someone out to look at it! Im very upset and will never buy another product of theirs! They need a class action lawsuit brought against them!

I have automatic Whirlpool washing machine since 3 1/2 years I am using. Now 2 times electronic board came problem so how many times can change like this? Why they are manufacturing if they cannot solve this problems? Should not sell in the market. This all not coming free and need to struggle. Whirlpool products all very bad appliances.

Does the CEO know you do not stand behind your products? My washer is not even a year old and cost about $400.00. And you have stuck about $1800.00 into repairs instead of replacing a lemon washer! The washer had problems the 2nd month I owned it and you stuck a new clutch in out. Now just about everything replaced, it still does not work so I will order more parts. This is ridiculous. I would love to hear back from your CEO and would like to be reimbursed for 5 days of pay to take off and wait for repair men, laundry mat fees, etc!

On 2-26-13 I received my new Whirlpool Refrigerator, Model WRF989SDAE, KSN 4191832, 28.6 cu ft, french door for a price of $2500.00. November 2014, refrigerator stopped working. Though it was not under warranty any longer, the repair company advised me that the problem was a warranty item and repaired it at no charge. This process took several hours of work by the repairman and two visits. He advised that this is an issue with the refrigerator and Whirlpool is aware. Now, May 2015, only 6 months later, ice is building up on the back wall of the freezer and the freezer is running constantly and very loud. Bringing in repair person, hopefully before it stops again. Appears to be related to the initial issue. I cannot trust this refrigerator and would highly advise everyone not to purchase a Whirlpool refrigerator. Refrigerator needs to be replaced, not repaired.

Bought a Whirlpool Gold model GI6SARXXF04 less than two years ago and have already had three problems. The first was a faulty main water inlet hose that dumped water all over the kitchen floor. It was still under warranty so I didnt have to pay for it. Now have two additional problems. About two months ago there was a puddle of water under the refrigerator every few days. I finally figured out it was ice build up in the bottom freezer chest that melted that caused the water leak. The second issue is that the ice maker just stopped working. It had been working great this whole time and then suddenly it just stopped making ice. I contacted Whirlpool and they will cover the repair for the defrost issue but not for the ice maker. Gee, thanks, way to backup your product. Im guessing the reason they dont backup the ice maker is that its probably the more expensive repair. Like many people here I also will never buy another Whirlpool product again, regardless of what it is. Theyve shown me that not only do they produce inferior products, they also arent interested in customer satisfaction.

I bought the Whirlpool Cabrio model # wtw5500xw2 about two 1/2 years ago. Besides my clothes not clean, I havent have any problems with it until recently. Usually it doesnt spin. The clothes are left soak and wet. First the belt broke, then the lid lock, then the nut came off the pulley, then the splutch assembly. There was a few more problems in there. Now who knows what is wrong with it? It is one problem after another. It is a money trap. The CEO was just after money. There needs to be one big lawsuit against Whirlpool. After I find out what is wrong with it and the cost to fix it, I probably will just go buy a new washer/dryer set. And it will NOT be a Whirlpool.

I called Whirlpool to have my dishwasher and fridge fixed. I knew exactly what was wrong with my fridge. I asked how much it would cost and was told $129.99. I asked why so much. I was told that it included the labor and service charge. I asked if I would need to pay for both units if I did it the same day. She said that the company provided a 30-dollar discount. I decided to only service the fridge at this time. I spent the entire day today, waiting for the service person to come. And when he showed up, I told him that the fridge needed a computer board. He then started telling me that it would cost $200 for labor. I explain that I was told that it should be $129.99 for service call and labor. And he said, No lady, its $70 for the service call and labor is $200. I then called Whirlpool where I spoke to multiple people within a forty-minute call to explain that this is absolutely wrong and that I am not going to pay for the service call. I then spoke to a Niki (3544) who is supposed to be a manager, who basically said my problem now is with the service company, not with Whirlpool and that there is nothing they can do even if they misquoted me. I agreed to pay $129.99 for service and labor, not an $70 service plus labor. I am so upset because I have been a client of Whirlpool for ten years. I have called for service on multiple items in my home, and I have never had a problem. This is so outrageous. I absolutely expect Whirlpool to rectify this mistake. I am also going to report this matter to the BBB and to Fox News. Whirlpool representatives should be able to provide a quote for one thing, and then when the service comes to your home, its a different amount.

DO NOT BUY THIS MACHINE. Mine is less than 2 years old. First one month after warranty expired, the clear lid cracked...$350 to replace! Then a few days ago a rusted circuit board came apart and jammed up my washer. This should NEVER happen. I contacted customer service and they told me that they are not covering this problem and that the service call is $175 and cannot estimate the repair cost. They also could not send a repair person out for 5 days. The washer has not been repaired yet so I do not know the entire cost but it will be expensive!

We bought the washer and dryer set almost three years ago. Great sales pitch! Energy saver, extra capacity, low water usage, Whirlpool name and I thought we were getting great quality! Three years later I am disgusted, disappointed and am junking the washer. The dryer has a new heating element that we proudly fixed ourselves after the repairmen told us that these were meant to be throwaways. We just thought he did not want to work on it. After watching several YouTube videos we had it apart and found the issue was a cracked heating element. We ordered a new one for 100$ and spent another 4 hours putting it back together. If we had to pay a repairmen to do all that the bill would have been the price of a cheap new one. Fast forward three weeks and now the washer quit and it can be one of at least 15 problems. After reading all these reviews we have decided to toss it as junk. It took forever to was a load of clothes negating any energy saving! Whirlpool should be ashamed of themselves for ripping off all of us hardworking Americans selling us junk. At one time the Whirlpool name meant you could count on a quality product! If Whirlpool really wanted to do the right thing, they would stop selling these immediately and give customers a credit toward the purchase of new washers and dryers!

I purchased a Whirlpool fridge in September of 2015. In March of 2016 I noticed the Fridge portion was getting too cold. By April 2016 the freezer stopped freezing and fridge started warming up. I reported the issue to Whirlpool and made an appointment. The day of the appointment the first company called and their tech couldnt make it because of a family emergency. They sent another company out instead. That company diagnosed the issue as a faulty chiller and ordered the part and told me they would be in touch. A week goes by with no working fridge and I call them. They say it will be another week for the parts. Two weeks go by - no call. I call them and they say they have the parts and I make an appointment.The day of the appointment I call them to find out what time they will be out and they tell me they dont have all the parts. And when I mention that I have been without a fridge and that I am frustrated that they arent calling me and that I am having to call them back the lady starts yelling at me asking me if I want to cancel my appointment. So I call Whirlpool and ask for another company. They send a company out that is not trained to be working on a sealed unit. So I call Whirlpool back again and they send an in house tech out three days later. This is over about a month without a fridge at this point. Their tech simply recharges the system and says that it should be fine.A week later the freezer stops freezing and the fridge warms up to the point that both are not usable. The tech comes out and diagnoses that there it is most likely the chiller because of a build up of frost in the freezer. Orders the part and a week and a bit later I call Whirlpool up to get an ETA on the parts. They say they have the parts now (no call??) and they schedule an appointment. The tech comes out and puts the part in almost a week later (2 months now) and says that it is still building up frost in an area that it shouldnt and calls tech support back and forth for the next two hours. He leaves saying give it some time to see if it works, but admits to me that it is likely it is leaking in an area that he cant access.So I call up Whirlpool and explain the situation and ask for a new Fridge. It has been two months and the tech by his own admission could not say he fixed the problem and thought the problem maybe somewhere else. After looking at my case and me being on hold back and forth for about a half hour the supervisor says that at this time I need to wait to see if it fails again. And that if it does I need to have a tech back on site to verify. So this will be the seventh time I took time off work, it will be the fourth time the fridge fails and that I will have to throw out groceries. When is enough enough. I am into this now for almost double what the fridge is worth in lost wages and groceries.Do yourself a favour and stay away from Whirlpool!!! If I have to guess the following will happen: five days from now the fridge will stop working again (when the Freon leaks out - same timeline as previously) and then I have to call for a tech (3-4 days) and the tech will come out, determine that it isnt working. I have another conversation with a supervisor asking for a new fridge and they miraculously agree (yeah I know). Then what two weeks, a month... before I get a new fridge. I anticipate that I will have been without a fridge for 3 months before it is all resolved. Ridiculous is all I can say. Whirlpool should be embarrassed.

This WP stove is so easy to use a child could do it. We use the built in timer all the time, not only when using the oven but timing items on the top of stove as well. Speaking of the oven, the self clean not only cleans but it leaves the oven sparkling. We love it.

We have our stove for over five years and we have had no problems with it over the years. It has a black top and this seems like it is a little harder to clean, but other from that we have had no problems with either stove or oven.

After 7 attempts to fix my 6-year-old Whirlpool Front Load Washer (original price $991.00) I had to trash it. Then I stupidly bought another Whirlpool Front Loader (WFW75HEFW) Feb 2017. It has not worked properly since day 1. The clothes come out dripping wet. At first I thought I was doing something wrong. I tried every cycle, limited amount of clothing and ran additional spin cycles to no avail. Finally I gave up and called for service.Whirlpool is very much aware that a number of their machines came off the line with defective spin bearings but they wont admit to it. Instead I am expected to have it repaired! It involves the entire inside of the machine being rebuilt. Its a 2 man job that will take 3-4 hours.This is totally unacceptable and it is obvious Whirlpool does not make a quality product nor do they value customer satisfaction. DO NOT UNDER ANY CIRCUMSTANCES PURCHASE A WHIRLPOOL WASHER. They are difficult to work with and I for one will never purchase or recommend any of their products. I purchased this washer from Home Depot and now my only hope is that they will honor my intention of purchasing a non-defective product. If not, I guess Im in for another miserable experience with a Whirlpool product.

I have a Whirlpool double oven. When I attempted to use the self-clean feature according to manufacture instruction, the bottom oven stopped cleaning in the middle of the cycle. I had a repairman out and he replaced the thermal fuse in the back of the oven. It cost $85. I didnt attempt to clean it again for another few months since I dont use the bottom oven often. When I did attempt to use the self-clean feature according to manufacture instruction, the same thing happened. I called the repairman and he said that the thermal fuse would blow every time I tried to clean the oven, because of the way the oven was manufactured. I contacted Whirlpool and they were not at all helpful. I intend to contact them again.

WRX986SIHV00 - French Door Fridge, cost $3k. After 16 months lights on top of fridge and freezer broke, Whirlpool only states no more warranty and offers no help. For such a pricey appliance that is a very weak quality and inadequate service IMO.

Do not buy this washer. It does not get clothes clean. I use extra rinse (that negates the water savings) and still clothes comes out with stains on them. Some clothes are not even fully wet when removed after washings. I find myself soaking and pre-treating many items. White socks and undergarments are grey soon after buying. I always liked Whirlpool washer and dryer products, but this is a very poor product.

Bought a Whirlpool Cabrio HE washer over a year ago. Recently, the spin and drain cycle stopped working. Went to find a repair person only to learn that many dont work on this model because of all of its problems. Did find a company who replaced a part ($100). Now sounds like a thrashing machine when it spins. However, now the machine wont even go through a regular cycle. Dont buy this brand!

Whirlpool Upright Freezer Model EV205NXTN01 – The freezer door interior plastic panel bows away from freezer cabinet causing door gasket not to seal. The new gasket doesnt help since the groove of the gasket mounts in bows outward with the interior plastic panel in the door. The freezer is 20 months old now and had the door replaced for the same reason at 10 months old. Now, Whirlpool says sorry it’s out of warranty. Guess they want me to buy a new door every year. I wont be buying Whirlpool products anymore as I dont need another boat anchor.

I had my Whirlpool front load washer stop working all together. Well the pump went out it filled up with water and shorted out the circuit board/control panel. Was going to cost more to repair it than to just go get a new one. I will never get a whirlpool ever again.

I have had this refrigerator for 23 months. The ice maker has been a continual problem. It overfills and water runs onto my hardwood floor. After four service calls for the ice maker, the defroster heater caught on fire and melted the interior wall of the freezer. Not sure if we fixed the ice maker since we had the fire four days after the last service call. My service rep declared the refrigerator unrepairable. Fortunately I had purchased an extended warranty and they refunded 85% of the purchase price after 2 years of use. Besides the ice maker problem and the fire, I also had trouble with food freezing in the refrigerator compartment. I dont recommend this model, but my repairman says that Whirlpool is as good as it gets.

I purchased a brand new Whirlpool Cabrio washer and dryer set not even 2 years prior. When I first started using it, I pulled shirts out of the wash after being ran through and found deodorant marks still on the inside of the shirts. I had to wash all of my loads on heavy soil and still had to run some loads through more than once. The wash machine quit working about 1 month ago, so I had a service man out to look at it. It ended up being the control panel and the part itself was going to cost me $300 and by the time I paid to have it repaired, the total cost was just under $400. The service man proceeded to tell me that Whirlpool had another company actually make the control panels for the Cabrio model and he has serviced several of these washers and when he would repair one part, another part would stop working. I was very upset and bought a new wash machine. I would like to add, I am a single mom with a 2 1/2 year old, so the wash machine was not used excessively in any way. I dont work outside so my clothes are never soiled heavily. Needless to say, my washer was not under warranty so Whirlpool couldnt do anything for me. A wash machine should last longer than less than 2 years. I would not recommend this model to anyone. And for Whirlpool to put their name on such a poor product is very disappointing since I have had good experiences with their products in the past.

Three Whirlpool fridges in 5 years. 1. Fridge one three doors replaced still not satisfactory, returned, warranty VOID. 2. Fridge two simply stopped being cold therefore not working 100+ food wasted before year. 3. Fridge three freezer leaking all over floor. Two years old 0 warranty left. I now pay again to repair. I am so beyond WHIRLPOOL PRODUCTS and so fuming??? Mad. $$$. 1300.00 to 1500.00 purchases ALL JUNK. NEVER WILL I PURCHASE ANOTHER WHIRLPOOL product. I do own a full file of continuous complaints. Brault & Martineau store Gatineau did the best to help with exchanges, sent repair man who did nothing. Will not deal with them again either.

I purchased a Whirlpool dishwasher on March 13, 2007, along with a 3-year extended warranty. Well on Nov. 15, 2011, I had a part in the control panel go out, so they replaced it and they charged me $129.00 for labor and $29.18 for the part. My dishwasher is doing the same thing. It doesnt finish the cycle and I have to restart it, so I called the repairman A&E. They said the part is only guaranteed for 90 days. The part only lasted six months! Its the same part and the same problem. It should be considered a defective part. No matter how many you have replaced the part, it is going to need to be replaced and at $160.00, I cant afford it. They should have to pay for defective parts. Also on this model GU2600XTPSI on the panel buttons, the start button was made with this puffy plastic that has pulled apart and now it looks terrible! None of the other buttons were made this way. What a crappy workmanship, they should be embarrassed. This dishwasher was not cheap; it cost $650.00 plus $50.00 for the warranty. 4 years is too short of a time to have to replace any home appliance. There are appliance out there that are three times as old as mine and they are still working. I guess in the last 10 to 15 years, big companies dont care about their products or the people who buy them, just about their profits! I will never buy or recommend Whirlpool products.

I was very excited about the performance of the washer as far as reduced water usage and reduced electric usage. After about 6 months though, I couldnt figure out why a lot of clothes, sheets and drapes came out with streaks on them. Very expensive to replace! Of course, the business I bought them from tried to get me to buy all types of fixes that had nothing to do with the problem and therefore couldnt answer me why this was happening. I am not crazy about a lengthy lawsuit. I am crazy about hoping the washer dies so I can go back to a less fancy washer that did the job better than this expensive monster!

Just bought the Whirlpool 3.5 cu ft, Top Load HE washer (model WTW4815EW), but of course, the sales person did not explain that HE meant LOW WATER USAGE. Wish I had done my homework. FIRST LOAD, clothes seem to be beaten to death, and must pour in detergent before you load clothes. So, Oxyclean detergent I always used in my regular (NOT HE) washer put a hole in one towel and discolored (faded out) the others. Also seems that the fast and hard agitator would not (logically) last very long. It seems to be working very hard. Im SO disappointed. Called Whirlpool to say I dont like it. They said to call Home Depot and see what they will do about an exchange. When I did, my sales person said that almost all the washers he sells are HE. I want the old type washer back that allows me to add more water if I want, change the cycle and water levels at my discretion, add detergent when I want to, and soak clothes if I wish.

After insisting to my husband that I wanted an HE washer with a large capacity so I could wash comforters and such and be ready for a house full of grandkids and visitors (we recently moved and had to leave my washer and dryer in the old house); I have been very disappointed with the washer. It leaves lint residue all over my clothes! Some of them I just cant get off. I live in Colorado and the sun shines almost everyday! I love to hang my clothes outside to dry and get brightened by the sun. Being a mile high makes the clothes even brighter I think!Anyways... back to washer... I have been doing laundry for 40 years. I have 4 grown children and know how to sort, etc... When I wash my darks, the lint that ends up on the shirts and pants... its just ridiculous! I end up scraping it off for about 25 minutes before I can hang them up to dry. On some of the clothes, there are marks where all the lint was and has stayed! Ive tried using less detergent, less fabric softener and always use the extra rinse. Tried setting it on the lowest spin cycle and the highest... Nothing helps. How do I tell my husband I would like to get rid of this and get an good old fashioned washer? I was a maniac for two months doing research and making a great cause to buy these machines!It seems to be a little better if I dry the clothes in the dryer, as the lint is pulled off somewhat, but the marks remain. If anyone has had the same experience and knows what Im doing wrong, or has a solution (other than going back to the basic machine) I would appreciate it so much. Disappointed in Denver.

Our newly renovated condo came with a Whirlpool washer/dryer, and its been a nightmare. Not only has the unit destroyed 5-6 items of clothing, but weve had to have two repairmen out to remove socks that were sucked into the drainage pipe. On top of all of that, the customer service has been terrible - their hours are very limited, and theres nothing the call center employees can do beyond sending a tech out to look at your appliance for a cool $175. All this for a machine that was purchase new in June 2014! We will never buy a Whirlpool product again. Sad example of why American manufacturing has so thoroughly declined.

I purchased a Whirlpool refrigerator in Aug. 2012. On Mar. 4th, 2013, the repairman said the compressor was no good. They will not give us a new refrigerator but will put a new compressor in. What a bunch of crap. I will never buy Whirlpool again. I have had two GEs and never had this happen.

I owned a Whirlpool Cabrio washing machine for 3 years (a two person household). The repairman just quoted $700 to repair a faulty center hub seal and bearing. This machine was not inexpensive. I expect more from a quality machine. A telephone call to Whirlpool resulted in two ten minute holds while being shuffled between representatives and each representative tried to sell me an extended warranty for another $289. Whirlpool should take full responsibility for this faulty product and not act like a telephone support center located in Eastern Europe. I am not pleased with this (lack of) resolution and do not plan to purchase another Whirlpool product.

My husband and I remodeled our home and needed a new refrigerator... I wanted to try a Samsung, but after exhaustive research on my husbands part, he insisted we purchase a Whirlpool fridge... From the get go, I have regretted that decision. The main reason being the door on the L side of the fridge does not close completely. Sure, it alarms for a time, but what about all the times I close the door and leave the house. I have had to dispose of more groceries than I care to think about... Never again will I purchase anything by Whirlpool!

We bought a Whirlpool washing machine two years ago and bought the extended warranty. The machine quit working so we called the warranty service number. We have had a repair man sent here 5 times from them. The technicians have put two new control boards and a new door lock on it. They have another part ordered for this week.The machine is still not working after five visits from service technicians and they say they cant fix it. The extended warranty service plan says if it cant be fixed they will replace it or send us a check for it. We have contacted them several times and they dont want to make good on it. So we have a broke down washing machine and have to go to a Laundromat every week.

Bought Whirlpool refrigerator in October 2014, model WDT710PAYH6. Ice maker never worked right and then started leaking water. A month later it is still not fixed even though it is supposed to be under warranty. I bought a Whirlpool dishwasher and stove at that same time -- both of those needed to be replaced right out of the box! Called Whirlpool and they wont replace. Only referred me to a different repair company. Meanwhile it is leaking all over the floor. Now I see all these complaints for the same issue, yet the Whirlpool rep says they know nothing of this problem! I have a brand new Whirlpool matching microwave that sits uninstalled. I am wondering if I should even bother. I bought expensive new appliances to avoid the hassle of older items possibly breaking down -- and I have never been more frustrated in my life.

Purchased a Whirlpool Cabrio 4 years ago. It worked fine until last October when I had to call a Repair Service as all the Digital Controls would not work. It was the Digital Board had to be replaced at a cost of $ 315.00. That was October 2016 and in October of this year 2017 it started doing the same thing again. I call the Repair Service and they told me not to waste any more money on this machine as it is a piece of junk. I guess he was right as when I read all the bad reviews it got today, I realize I will be better off to buy another machine. It will not be a Whirlpool product. I purchased a Sears Kenmore Washer & Dryer back in 1995 and the washer lasted 20 years and I still have the dryer. This is what you refer to as a good product.

My Whirlpool Cabrio washer (WTW6600SG2) is a money pit! After reading all of the nightmare stories concerning this washer one would think Whirlpool would offer a recall and try to correct their wrong doing. Do not buy a Whirlpool Cabrio. It was the worst decision I have ever made! Whirlpool does not stand behind their products. I cant believe they can get away with treating their customers so unfairly, taking their hard earned money for crap like this, then not offering to help after so many have had issues. The Cabrio is loud, doesnt get clothes clean, and is always flashing UL for uneven load (when it works at all). My local repairman has made many trips to fix my problem Cabrio. This time he is at a loss. Ill be buying a new washer and it will not be made by Whirlpool! Please, if you are reading this be forewarned!! You will regret your purchase if you buy a Whirlpool Cabrio.

I spent the extra money and bought a very nice looking Whirlpool range and oven. Within months, it started rusting. I keep a meticulously clean kitchen and Ive never had this problem with any other appliance. I sent letters to no avail. They said that their warranty on rust was 30 days! They refused to do anything about it and told me to go ahead and sue them. Terrible product. Defective from the factory. Do not ever buy a Whirlpool product as they do not stand behind it.

The interior features such as turntable, etc are very cheaply made. As is the case with most Whirlpool appliances, this one is way over engineered to focus on appearance and gadgetry. This is not a good microwave for a serious cook who prefers that the design focus on functionality and ease of operation.

Purchased Whirlpool gas hot water heater from LOWES on 9/25/2016. After the installation, tried to light the pilot light for 90 minutes. Followed the recommended instructions, I could not get it to light. Called LOWES they told me to call Whirlpool. I did so, and told them I will return the heater to LOWES the next day. Whirlpool customer service very bad. Returned the heater to LOWES the next morning, went to a local plumbing shop and purchased a Rheem heater. After installation it lit very first attempt. Now three weeks later I get a letter in mail from collection agency that LOWES turned me in for stopping payment on the check I wrote them. After reading the many negative reviews and they disregard for my and my familys safety, nobody should purchase a Whirlpool gas heater from LOWES.

Whirlpool Wash-And-Go washer and dryer - I purchased these new November 2016. Since week two, they have been a constant problem (i.e. not enough water to even get clothes wet, forget about clean; gulping soap from the dispenser; rubbing holes in clothing; putting rust on washed items). The dryer NEVER gets the clothes dry; no matter what setting they always come out damp, even after Ive put them through for two cycles.Three separate repairmen have come to work on the washer replacing sensors and the entire control board. It worked fine for two weeks, now its back to guzzling soap. (It is supposed to do up to 12 loads on one refill of detergent. I get two per refill. Ridiculous! Soap isnt cheap!) And, today it ruined brand new bathroom mats with rust all over them that I had to hand wash to try and remove without much success. At this point I would advise anyone looking for new appliances to try any other major brand and NOT Whirlpool. As soon as I can get the money, these are being junked and Im NEVER buying Whirlpool anything again!