This Whirlpool top load washer has been an awesome product. I have had it for 9 years and havent had a bit of trouble. Its very quiet and very reliable. The only maintenance is running a cleaning tablet on the cleaning setting once per month, and it tells you when its due... No musty smell problems that I hear from people with front loaders. Its a great product.

This is a Whirlpool dishwasher that has been functioning for 25 years! Much better than any of my 4 newer appliances. It has never had a problem. It is easy to load and unload. The dishes are always clean. Dread getting a new one.

We purchased a new side by side black finish refrigerator. There is a design flaw in the water/ice dispenser. The bottom of the dispenser has no edge so any drops of water run down the front of the refrigerator! This leaves constant watermarks down the front. 2. The finish scratches very, very easily. I would not recommend this finish to anyone with children or pets. When you open the door if your ring touches the surface it will scratch it! There was NO user manual on care and I used paper towels to clean. Big no no, as now I have fine scratches on the front. I would never buy this product again because of these flaws. I have a 7 month old refrigerator that looks 7 years old and it is just my husband and myself! Love the inside, hate the outside.

My wife and I purchased the Whirlpool calypso washer and dryers and have been regretting ever purchasing a Whirlpool product. Not more than a year and a half after spending thousands of dollars on their products the troubles started. I called the company and they sent someone out to look at it for repair. He vacuumed out the lines and kept restarting it over and over and eventually it started working again and they charged a hundred dollars and something and said there most likely be more problems since they have many calls on this issue. Sure enough it started again and just kept retrying it over and over to get it to work again as well as vacuumed the lines again like he did. Now its at the point it will not work no matter what. It just keeps flashing LD and shuts down. So I did a online search for other consumers having the same problem and was shocked by the amount of the same problem with others (search this model flashing LD and you will see for yourself). When I contacted Whirlpool they played dumb and lied right thru their teeth saying they have no issues with this model and refused to do anything. I have since learned there has been court cases where the courts ruled against them saying that it was defective and had to notify consumers which they never did. Even when the repairman came out nothing was said. I have since learned that all they did was changed the name to a different model which is having the same problem (no kidding!!) and continued to rip the public off in the name of CORPORATE Greed!!!!! I advise everybody never to purchase a Whirlpool product ever again and maybe we can bankrupt them and put them out of business where they belong. All the customer service agents deserve to be unemployed and suffering after long waits on the phone and then lying straight face to the consumers. Pure evil!!!! We all have to stick together and bring these criminals down. How can they say we have no issues when a simple search of Whirlpool Calypso problems with draining and flashing LD and shutting down. There are thousands of people complaining and no action is done. Shame on these people and their souls are lost forever. Never buy a Whirlpool product and tell everybody you know to stay away! They should have their ** and/or ** cut off and have to suffer the same way the struggling consumers are after scrounging up thousands of dollars for a 200-pound metal paper weight that aint worth a damn!!!!

Even with the hottest water on the most heavy duty setting, regular dinner plates are not cleaned. The flatware holders that are set in the door (instead of free-standing in a rack) do not have adequate holes in the holders and are too far away from the limited jets to get adequate soap and water to cleanse the flatware. Even after rinsing all scraps off the plates and flatware, we find bits of food, gravy, or smudges on the plates and flatware - since its first usage. The manufacturer had the audacity to claim that was normal. Settings include delayed starting, heavy duty versus normal washing, and different types of drying. The heavy duty washing is definitely poor quality, and there seems to be no difference between any of the drying settings. The delayed start is nice. The physical layout of the prongs on the racks and the folding racks do not allow easy fit for most sizes of pots plus plates on the same bottom rack. I cannot put a 1 gallon pot level on the same rack as dinner plates. I must put it beside salad plates. Only small sauce pans fit neatly or cleanly beside dinner plates. Yet the external dimensions of this dishwasher are the same as the competitors standard size. Looks neat and is easy to clean. Also, the exterior does not show scratches. Actually, I cannot see where the exterior has any scratches. The service people were very little help. The Warranty said that after five (5) service calls the unit would be replaced. We made six (6) service calls, but we were told that we did NOT have six because if you called again within 90 days of a call, that was considered the same service call. That requires 450 days minimum to have five (5) qualified service calls, but that warranty was good for only 365 days!

Have had this washer for one year. Clothes have never been clean since day one. Dark clothes come out with white marks all over. Having to use an extra rinse cycle or set on bulky items - whats the point of a high efficiency appliance? Still not clean after that anyways. Stains such as chocolate and toothpaste still remain after washing and my husband complains of finding small holes in his clothes. Lid needs to be left open at all times or you get a funky smell. I am using the HE liquid detergent, even tried a cold water product for cold washes. I hate this washer. Wish I had my 20 year old Kenmore still.

Bought this refrigerator in 2018 and ice maker went out 2x, then compressor went out and waited 4 weeks for part. Now the refrigerator is broken again and not cooling. Dozens of other reviews indicate the same issue with this model. It’s clearly a defective model. Customer service in Tennessee are very friendly but my refrigerator is still not working. Whirlpool French door - wrf954cihm.

My microwave came with my house. I didnt choose it but it has been a great brand. I love the preset timers for defrosting & for popcorn. Its big enough to handle an 8x8 pan which was important to me. The turntable could be more stable. My model is a built in over the oven option. Black & digital. It has lots of preset options & is pretty user friendly. I like the size & it is super quiet.

Oven was just about 3 years old when the oven bake feature failed the first of many times! Display says fault detected. Was able to get oven cleaning done and then it worked again but eventually has failed repeatedly since. Further reading and support from technicians has revealed its an oven control issue and replacement part is same cost as new oven! Apparently the oven control Whirlpool designed and installed cant handle heat!?? Very unreliable and would never buy their appliances again!

I purchased my Cabrio washer and dryer 2 1/2 years ago, and for the past 6 months, I have dealt with it being unbalanced and I tried everything to get it balanced. When I researched the problems, I found so many other consumers are having the same problems and that Whirlpool will do nothing about it. I decided to start a petition on Change website to try to force Whirlpool to stand behind their product and correct the problem, offer us a refund or another product, or even fix the darn thing. It is tough economic times, and we spent money to have something that was energy-efficient as well as a product that is supposed to carry a good name. I am a single mother with three children, and I dont have a $1000.00 to throw away after 2 years. This is shameful that we, the consumers, have to deal with this. Please go to the Change website and sign my petition. The more signatures I get, the more leverage we have to deal with Whirlpool. Lets pull together and show Whirlpool we will not stand for them robbing us of a quality product. Thank you so very much.

We bought a duet set front loader washer and dryer on 3/14/2010 and our washer already needs new bearing and costs about as much as a new washer. I think that is pretty bad when you can’t get two years out of a product and then can’t get anyone to help unless you want to pay out. I will not buy another Whirlpool product! Done!

I have bought what I thought my dream washer and would never need to buy another one. I told people about it and could have sold many of them. That was in my first year. Now I am into our second year with them and it quits. It cost right at 500.00 and when I called Sears, the company I bought it from, they charged me a service call and says it will be $585.00 to fix. WHAT? This is a lemon. If I were to buy a car and have this sort of problem they would warranty it. Why not appliances? This is an outrage. This should be illegal to sell.

I will never, ever, ever buy a Whirlpool appliance again. We bought the french door bottom mount refrigerator in 2013. After our warranty ran out, we had to have the guts of the refrigerator replaced and then the ice maker replaced again. Now the freezer door wont shut and I cannot believe that Whirlpool would put their name on this piece of junk! We splurged to get what we thought was a high end model but it has been problem after problem. RUN from Whirlpool!

Got a Whirlpool hot water heater 5 years ago has 9 year warranty. The threads on the nipple are rusted out and it’s leaking. It has rusted out so badly that it’s leaking. They are refusing to replace it saying it’s a plumbing issue even though the nipples that they installed are what’s leaking.

Love my Whirlpool stove and I just bought a Whirlpool French door fridge. I also have a Whirlpool washer and dryer and I am very happy with the way they work and look. I replaced my Tappan stove that I had for quite a while and it was a good stove but I am very happy with my Whirlpool stove, it not only works great but it looks great.

I have a Whirlpool cabrio washer (Model: wtw6300 Serial Number: CT3573525) and I am very disappointed with it. The spin cycle is the worst--sounds like a jet engine and gives me the UL error message of unbalance load. The machine was purchased in 2007 but was kept indoors. At the beginning, I didnt care because I had warranty with BrandsMart. I had to call at least four times. But now, I bought the automatic control and it didnt work. For two days, I was trying to balance this machine but it is impossible since the beginning.I contacted customer service and they advised me to contact the repair service in my area to get a diagnostic analysis of the issue. Hello! I already know what the problem is after reading all these reviews! I cannot tell you how pissed off I am. I will never purchase anything Whirlpool. Two of the gas burners of my Whirlpool kitchen, after two years of use, are no longer working. I will definitely contact BBB as soon as possible. Come on, fellow complainants, let us continue to fight to get a possible recall soon! We all have the same problem because this is a manufacturing defect!

In August 2011, I purchased and had installed a Whirlpool Wall Oven RBS305PVQ04 for $1000+. In July 2014, the oven failed with blown internal fuses and a thermostat $225+. In November 2014, the oven failed again, this time with a failed controller board. Whirlpool claims there are no replacement parts after just three years! In calling Whirlpool customer service for help, they basically said tough luck! NO parts, NO adjustments, NO service, you own a boat anchor. I tried to buy American; boy, was that a mistake. So it cost me $415 per year to own this LEMON. DO NOT DEAL WITH THE WHIRLPOOL COMPANY!

We bought a Whirlpool range. The same day we got it the burner exploded and my electricity went off. I called the customer service to request a replace, they told me a technician had to go and look at it. They did. I had to miss a day of work as they come between 9 to 5 pm (will not tell you what time). The guy say the range is defective (really!??) and will need to request parts. I called them again (after 15 times you wait minimum 30 min each time). They told me they can replace the parts. I said I bought a new appliance not an use one. Money back. Told me somebody will contact me. Week later nobody contact me and still waiting 30 min each time. I called nobody answer my calls. I wonder I may get somebody if I wait hours? No idea. Please do not buy from this guys... They are bad in all the way.

I purchased this Whirlpool washer (model WTW7600XW2) on October 2011. Fabric softener dispenser is full of water at end of cycle. Repairman has replaced parts three times, but the problem is still not corrected. Today, I talked with a Whirlpool supervisor. She says this is normal. She told me to take the cup out and empty it. The cup is not removable, so she said I could blot it out with a cloth or sponge. I paid $800.00 for a washer with an automatic fabric dispenser that I must empty manually. I have used whirlpool appliances for 50 years of marriage, but this is my last one. I am very disappointed with customer service.

Whirlpool appliance suite purchased May 2013. Whirlpool Gold French door refrigerator with bottom freezer, Model #GX5FHTXV. At the end of my kitchen remodel, I was excited to have my new Whirlpool appliances delivered by an authorized Whirlpool installer. When the refrigerator install was complete, I alerted the delivery people the French doors were not aligned properly. There was at least 1/4 difference at the top of the doors. They did their best to fix the problem to no avail.I called the Specialty Appliance store to complain and they had a repair man come a few short days later to examine the issue. He inspected the problem and had to order new door parts. A few long weeks later, the repair man came to install the new parts. Well, to my disgust, the new parts did not fix the problem. This next sentence only refers to the place I bought the darn thing. I then called Specialty Appliance to inquire about returning the appliance and of course they wouldnt take the appliance. Im stuck with it. The workman ship is cheap. The internal drawers are poor at best. I spent a good deal of money on what I thought would be a good product. My previous appliance suite was Whirlpool and I NEVER had issues the 13 years I had them.Whirlpool Gold freestanding double oven gas range, Model #GGG388LX. Problem: oven catches fire while self-cleaning oven. Big problem. Takes forever to get rid of the smell that leaves behind. The range itself has worked well. No issues with cooktop and its easy to clean. The grates dont stay black and look rusted in a couple of places. Oven cooks well as I know how to make adjustments as to not overcook meals.Following cleaning instructions provided by Whirlpool, I wipe out the oven (when cool) after spills if there are any. I thought I would run the self clean since Ive had the appliance over a year to properly maintain it. BAD IDEA. After running the self clean cycle for about 35 min, I noticed fire. Wanting to protect my $60K remodel investment, I quickly cancelled the clean cycle and watched smoke pour out of the top. Not a fun experience. It took about 15 minutes for the fire inside the bottom compartment to finally go out. Wont be self cleaning my self-clean oven again! By the way, I didnt clean the oven with chemicals because the owners manual states not to and I HATE using those chemical anyway. Again, stuck with an appliance I am not satisfied with. Lesson learned? Yes, I will NEVER buy a Whirlpool product again. Kinda wish I still had my old white ones...

Whirlpool serviceman came out to see why our brand new dishwasher didnt dry the dishes and left pools of water on glass bottoms. Repairman said all the new dishwashers are like this. The heating elements do not heat hot enough so that the machine gets a higher efficiency rating. He said the solution is to use the dishwasher during the day and at the end of the cycle, open the door so the dishes air dry. My previous 24 year old GE dishwasher did a great job of drying the dishes even when we didnt use the heated dry cycle! The only reason we had to buy a new dishwasher is because we bought a new house. I am very disgusted with the Whirlpool dishwasher. Might as well do dishes by hand.

HORRIBLE! I purchased a Convection Oven Microwave in Oct. 2010 and 3 months later, the microwave stopped heating! I called customer service and they replaced the magnetron and two other parts. Two months later, the appliance broke again with the same problem. They serviced it again. Today, it was broken again and the service technician stated that its the magnetron again. I called to get it replaced and they said Whirlpool doesnt replace appliances, they just keep servicing it. **! How can they get away with this!

Handle needs smarter design. I purchased model #WRT311FZDM00 in November of 2015, didnt install in my new home till December. I am a single senior female, so there is little wear on the fridge, unlike a family of several people and with kids. The door handle actually broke just behind the screws that hold it in place, the plastic part of it broke into a couple of pieces. The cost to replace this handle is approximately $80, which is ridiculous in my opinion. Please start making things of quality materials instead of cheap plastic, especially at a stress point of a part. Even I know better than that. All 4 of my major kitchen appliances are Whirlpool, as well as my washer/dryer. I thought I was buying quality products. Hopefully things will hold up better with the other ones.

Its just okay. It doesnt clean as well as I expected to regardless of which dishwasher cleaning brand or type I use. It frequently leaves full residue even if the dishes have been pre-soaked. Even though I have it set to see to it, I feel it leaves too much water on the dishes. It doesnt have a rinse and hold setting. This dishwasher doesnt have any extraordinary features. It just has the features you would expect to find on any dishwasher. The size is average but it handles the amount of dishes I have as a one-person household. Its unobtrusive; nothing sticks out, there is no faux metal on it. Those are all features I like. Its not as quiet as it makes itself out to be. On the whole, I feel this is a very average dishwasher.

Weve been in our new home less than a year and a half and our brand new Whirlpool French door fridge is dead. Service is a week away. Updates to follow.

Since there is only two people in this home, we decided to go for the smaller front-loading machine. This was purchased in 2012, still running. It does a clean wash, however common sense does remind people to not over-load a front load washer. If one follows directions, it gets the job done, and ones machine lasts longer without problems. Thanks.

We have owned refrigerators for over 40 years. Never had one as bad as this. Three ice maker replacements lasting maybe from 6 months to 2 years. Cap that off with customer service people who by voice and tone could not give a rats ** about helping the customer. Today it took me from 3:10 pm to 5:30 pm to get a real person on the phone. When I did the attitude is so reminiscent of a fast food hamburger joint with arches. Yes they know the refrig and ice maker are and have been a problem but they don’t care cause we have no option. Whirlpool will NEVER SEE ANOTHER penny of my money. Time to look at real appliance makers. Horrible.

Purchased a new range from Lowes in November. It was delivered in January. Was told upon purchase that there was a one year warranty on the item. After using the item approximately three times, a piece of aluminum foil fell to bottom. It stuck to the bottom and removed some of the porcelain. Bacon grease had spilled into the middle of the oven which caused the oven to warp and also discolor the porcelain. They sent a tech out, who called Whirlpool. Whirlpool told them that it was cosmetic damage and only had a 30-day warranty! They also said I had to contact customer service again, which I did. Customer service said that the tech didnt do what he was told to do and that they would send someone out again. The same tech came out, called Whirlpool again, and was told there is nothing that can be done. I asked to speak to a supervisor because I was unsatisfied with this response. A two-month old oven shouldnt look like it is five years old. I never spoke to a supervisor. The rep just kept telling me that there was a 30-day warranty and that it was stated in my manual. After insisting that I speak with a supervisor, she placed me on hold. After a few minutes came back stating that she is sending my request to another department and that they will call me back in three to four days with their decision. I would not purchase another Whirlpool appliance even if they decide to replace this one, which I sincerely doubt that they will. VERY POOR CUSTOMER SERVICE!

I bought Whirlpool gas water heater on July 2009. It keeps going out. It is not working. I found out you cant even get parts for fixing it. The dealers told me its junk. I was told to buy a new one. Then, I found out its been in class action lawsuit. How did I get to buy it after it was recalled? I dont know what to do.

Model WTW7600XOW, installed 12/9/2010. For about 4 months this washer has sounded like a jet plane when spinning. I called Whirlpool to see if it was recalled or what they recommended. They provided 2 repair places near me. The repair shops recommended buying a new washer since the repair is so costly. A 4 year old washer used by 2 people should have bearings that last more than 4 years.

My Whirlpool Dishwasher Model# DU980QPDP, just quit a few days ago after 21 1/2 years. We paid $554.04 for it back in 1995. It was the top of the line. Quiet, with 4 fold down shelves on the top rack. Silverware basket on the door. Also a separate knife basket on the door. It came with extra interchangeable door panels. When the white ones got dented we changed to the black ones. The racks are still in good condition. Never had one repair on this dishwasher, though I used it every day, sometimes twice a day. It had a 4 year warranty on the control panel and a 20 year warranty on the tub and door. We would have it repaired, but cant get the part.

After 1 year, my fridges plastic interior wall/liner started cracking everywhere. One crack is right across the entire back wall; other smaller cracks are on the sides and back. Three fridge shelves literally fell apart: pieces fell off! The glue came undone on the sides of the shelf that hold the glass in. Pieces of the shelf itself were falling out of the fridge. The microwave door has plastic trim around the glass on the door, and it is cracking also. It seems that anything that was made Whirlpool and is plastic is cracking and/or disintegrating. Sears caulked the cracks in the fridge and is replacing the shelves, but nothing is being done about the microwave. Whirlpool said, Too bad. Go to Sears. We may have made the product, but Sears is responsible. And Sears is saying Too bad; weve done all we can.

I bought my Cabrio washer about 3.5 years ago. Little after the year, I had to replace the lid because the hinge broke. Then came the F1 code, which I noticed if you turn the machine off for a couple of minutes, it resets itself. About a week ago, it started making a grinding noise and staining the clothes with oil or grease. Transmission problems. I was told by the seller it had a 10 year warranty. I called them up and now I got to foot the bill for a technician to come to my house and tell me what I already know plus labor. Might as well buy a new one. Beware because I believe Kenmore is manufactured by the same company.

What a POS. Havent even used the thing to cook a meal yet and already some chunk of metal fell out from the port at the top left inside the oven (behind the vent). It was clearly cheap pot metal. What else is this thing made out of?

I bought the WTW4815EW0 Whirlpool washer. Worse machine ever! It’s take forever to wash a load, there’s no way it’s efficient when it takes twice as long to wash one load. It doesn’t sense the water level correctly, Its noisy, and after only having it 3 years it crashed on me. I refuse to waste money fixing the piece of junk and when I go to purchase a new one it won’t be a Whirlpool.

The drip hose had to be replaced 6 months after I purchased the refrigerator. At that time the warranty covered the part but the technician told me that Whirlpool was aware of the problem. About 5 months after the warranty expired, the same problem again - ice built up on bottom of freezer and water leaking out from the left side leaving a puddle on the floor. I called Whirlpool and they said warranty is expired. I tried to tell them about the defective part but to no avail. Had to pay to have drip hose replaced again. One year after that the main CPU board went and had to be replaced ($350.00). I sent the part back to Whirlpool, registered mail, hoping they would respond with a yes, this was defective. Their response back to me was, “warranty is over.” For a main board to fail in a $1500.00 refrigerator in less than 3 years was uncalled for. Two days ago I noticed the puddle on the floor and had to call in a technician and ONCE again the drip hose had to be replaced ($160.0). He told me Whirlpool is well aware of the problem and there is a Service Pointer out on it and the code is S38211. Thanks for nothing Whirlpool. The refrigerator was a lemon and you did nothing about it. I wish I would have read these reviews first. No more Whirlpool products for me! PS. I was a dedicated fan of Whirlpool for 40 years!

I am very sorry I bought this machine. CU rated it pretty good. Nope. 1 - It rarely dries everything completely. e.g., the collars of t-shirts or turtleneck shirts are damp after the load is finished. I have to run the machine again....Energy efficient? Energy schmefficient. and I havent even TRIED to use the low heat delicate cycle. 2 - The cute modern buttons are hard to push in. 3 - The top of the machine doesnt have a level lid... Its curved. Not very useful for setting anything on while you work at any part of your laundering process.

Purchased fridge in November. Broke 1st time in May. Design defect that Whirlpool knew about. Repair was to move a part called a thermistor farther away from where ice was building up. Broke again in July. Called for service July 28th. Its now Aug 23rd. Was just told by repair service parts might be in Sept 15th. Had to throw food away twice, missed work 5 times for service calls. Repair company & Whirlpool have done nothing but lie to me. All Whirlpool offered was a $150.00 inconvenience fee. Not even close to what Ive lost. Never even received that & now they wont return calls. Talked to 5 different people at Whirlpool, including supervisors. All said they would call me back, but didnt. Keep leaving messages & they just ignore & dont call back. Still no fridge. Want my money back or a new fridge at this point.

I bought it 1 week 1/2 ago and cannot wash correctly the clothes in it, have to rewash 2 or 3 times and bedding? Forget it. Still is dirty. Water does not go over the clothes, it suck for the price I paid.

I purchased a Whirlpool gas top range from Lowes in Somerset Ky September 2013. Model number WFG524SLAB1. The surface is showing bubbles. I contacted Whirlpool and they gave some kind of story. In other words I am stuck with it. Still under warranty but they wont send someone out to look at it. Lowes told us that it could be a paint defect when it was made. If the top starts peeling, it will be a real mess. I have never used anything abrasive on the stove top. As of right now I am not happy with Whirlpool at all and if they dont do something about this, I will never buy another one of their appliances.

We bought a Cabrio washer less than three years ago. I have never felt that it got my clothes clean. The washer recently stopped spinning and agitating. We were told by a very experienced repair technician today that the gear case and bearings in the tub need to be replaced at a cost of $700.00. Needless to say, I am very upset. I called the Whirlpool Company and after being on hold for almost 15 minutes, I was told that my washer is too old to qualify for any help with repair cost or part replacement. My household consists of two adults. We do on average three loads a week. This is an inferior appliance and after this experience I will never purchase another Whirlpool product.

I have been married for 43 years and started my marriage with a Kenmore Washer and Dryer. That was because my mother, aunt, and grandmother all had Kenmore Washers and Dryers. Kenmore was made by Whirlpool. In 43 years I have gone through two sets of Kenmore Washers and Dryers, and one set of Whirlpool Washer and Dryer. I have always been very pleased with your product and have never considered buying anything else. However, last year we bought a new Whirlpool washer and dryer. I have no complaints about the dryer, but this washer is a piece of **! It is a cabrio top-loading high efficiency low-water washer. What idiot came up with this idea? Tonight I am once again having to divide my washer load and run them for at least a second time. This is not cost effective!!! This sprinkling with water and sucking it out doesnt work. Not to mention that since we have gotten these wonderful energy saving appliances our electric bill has increased instead of decreasing. You need to make a washing machine with a wash tub and agitator like you use too.

Refrigerator caught fire - I own a 2003 Whirlpool Gold side-by-side refrigerator that I bought new from Lowes in 2003. On Friday, July 13, 2012, I woke up to the smell of burning wires. I called 911 and they sent out a fire engine. While waiting for the firemen to arrive, my neighbor came to help me determine where the smell was coming from. Within seconds, we heard loud clicks and a huge cloud of gray smoke came out from behind the refrigerator. The firemen arrived, entered the house, unplugged the refrigerator and told me that the smoke and smell was coming from behind the fridge.

Purchased model WRT311FZDMOO refrigerator on Aug. 6. Took 3 weeks for delivery. All 3 door bins for this refrigerator have cracked after less than 2 months. Called customer service. They say its wear and tear. And ask how many would I like to purchase. Looked online. Cost is 30.00 to 32.00 per bin. Cant put milk in the door bins. The cracks puncture the container. Poor quality plastic.

I bought a Whirlpool Partner II 5 and a half years ago. It was always noisy and took very long to run a cycle. It started to malfunction after 2 years. We bought a new computer for it and a new control panel for the touch keys. It still kept not running a cycle fully. We found a YOUTUBE video that showed how to reset the model by pressing a combination of Normal and Heated Dry and that seemed to fix it for 2 years.It has stopped working again. Now it seems that the heating element is out. It doesnt clean at all, a scum film has covered the inside of the dishwasher and even mold spots are appearing. Ive had to wait extremely long times on hold to talk with an agent. My option is to hire a repair tech to come out and repair it and I pay for the parts. Seems like a bad deal since Ive already spent over a hundred on repairing it and a lot of hours. I will never buy a Whirlpool brand appliance again.

Never again will I buy a Whirlpool product. I paid over $800 for a new washer 51/2 years ago. I had it worked on twice under extended warranty. Now the bearings are out of the tub and it sounds like a jet taking off when it spins. I had whirlpool products in the past and they lasted for years with no problems. I have a friend who has a relative who is an engineer for whirlpool and his job is to engineer their products so they fail within a certain time frame. They dont want them to last like they use to. They now have gotten their product line to the point where they can tell when it will fail. This is crap. What happened to products that lasted like they use to. NEVER BUY WHIRLPOOL.

My refrigerator is about 7 years old. Has performed great. Good use of room inside. Easy to clean. Bought only Whirlpool products for years however since the last purchase of a range a couple years ago the quality was greatly diminished. May be changing brands now.

I stumbled across this site while browsing the Net, looking for a way to deal with the same situation I now know you all have been struggling with: Whirlpool Washing Machine! I wonder: Is NASA still accepting volunteers for their living on Mars experiment? Id rather beat my clothes on a rock than touch that POS Whirlpool that has me back on tranquilizers! Mine was purchased about 2 years ago when I was in bad health and my son was handling my affairs. I could tell - just by listening - there was something very wrong with it, from the first load my son attempted to wash. It would start and stop, restart, restop, ad infinitum and made a terrible racket. I told him nobody would intentionally make a machine like that--something had to be wrong with it but he assured me that he had checked both with the store that sold it and he also read the manual. He had a hard time accepting but we thought maybe this was because it was new and would settle down after some use; after all, the store (Best Buy) assured him the sound was normal for this particular machine. However, the weird sounds did NOT lessen nor stop, nor did the starts and stops. Little did we know, this was just the tip of the iceberg! We have encountered/suffered through every nasty performance detailed here: low water, wont spin, leaves clothes soaking wet, wont spin out excess water, lid locks (grrrrrr), it cant seem to switch from one procedure to the next; there is nothing washing the dirt out of the clothes--they just sit in the water and soak(?), then the water is released. Clothes come out with stains still on, so wet that the water must be wrung out of them! Very hard for me with arthritis all through my body! Ive tried countless times to reset machine to Drain & Spin. Ive even waited (yawn) for it to unlock so I can open and then readjust the heavy/wet laundry, trying to make it even all the way around so to avoid an unbalance. But nothing helps. It will start to spin. And then it stops. (wait, wait) Starts to spin again. Stops. (wait, wait) Starts again, does it a bit longer. (start to relax) Stops. Ive spent HOURS engaged in that kind of mindless, maddening frustration, just trying to wash one small-medium load. (I wash only for one person--myself, now.) My son, who got married and no longer lives with me, said the only way he could manage to struggle through it - and agrees it DOES take an inordinate amount of time--for just ONE load, he has to put the settings so that it washes in Deep Water even if small load. He sets Rinse, to 2 Rinses. He sets it to Soak even if the soil is light. Even then, it still makes noises, starts and stops, has to be adjusted several times during Drain & Spin. Last but not least, the noxious odor: OMG! I left one batch of laundry in the machine, with the lid open, as it was very late so figured Id dry them next morning. Some hours later when I went back to shake them out and put in clothes dryer, they smelled so awful, I had to wash them all over again! In fact, Ive had to follow my sons admonition to leave the lid up AT ALL TIMES unless actually washing in order to keep down the stink. I washed my last load with Baking Soda added to wash cycle in an attempt to lessen the odor and get laundry cleaner. Someone here wrote - in their review - that there should be a Class Action (Law) Suit filed against Whirlpool. I AGREE!!! And I want to opt IN on it. There are several law firms that advertise on t.v. that specialize in Class Actions. It would take some time and paperwork but will not cost us anything unless we win the case. Then the law firm gets a percentage. I am willing to work with one more others here who truly want to settle out this problem. I cant believe 2,000 (and thats only here), people are willing to eat hundreds, thousands of dollars of worthless, mind-gripping, rubble such as we have spent our hard-earned money. Other manufacturers recall their defective merchandise and/or replace it, or make arrangements with the retail stores who carry it to make amends, free repairs, whatever it takes to make dissatisfied, disenfranchised customers, whole. We paid for these demons from hell and we deserve to get an equivalent in merchandise (that works properly) or services. That is how it is done here in the U.S. For the life of me, I just cant comprehend why Whirlpool has been allowed to continue selling this junk--why no entity or person or lawsuit has stopped them! As I said, I am willing to work with a core group who is serious about filing a Class Action (Law) Suit against Whirlpool. It may be that the retail stores would be included as well; however, that is a matter best left to the discretion of whichever law firm we select to represent us. For those of you here who do NOT wish to be included, do not worry; you are not being pushed into anything. The way Class Actions work, you have the choice to opt IN (be included to receive your pro-rata share of what is collected). Or you are completely free to opt OUT. By opting out, that means you do not wish to be part of the Class Action and therefore, you will not be included nor will you receive any portion of the recompense collected via the Class Action. Just for your information, though: You are allowed, by law, to bring your OWN lawsuit against all or some of the same parties. The most common reason for opting out, is if you have suffered an extra large financial loss and prefer to file your own suit in order to collect ALL recompense; whereas, sometimes - in a Class Action - the individual plaintiffs may not recoup the total amount they feel they have lost. If you DO decide to opt out and go on your own, realize you will be fully responsible for lawyer fees (although you CAN add them into the balance you are seeking in your suit. Settlement of your claim may or may not include lawyers fees.) Good Luck to all. To those who wish to file a Class Action with some of the rest of us, please contact me if you want me as part of the core group of plaintiffs.

Whirlpool Cabrio drain problem - I never had a washing machine that lets so much through to the drain pump. I replaced pump three times already. First of all, if you put anything with buttons in this machine, you can kiss it goodbye. This machine destroys clothes then lets buttons and coins and whatever through to destroy the fins on the discharge pump. When is the BBB going to do something about this consumer ripoff?

Whirlpool Corp. stands behind its products. Bought the Cabrio Washer in June 2011. Lid cracked in October 2012 and was not covered under the Lowes extended warranty because they called it a wear item. However, our local Lowes store in Avondale, PA replaced it for us. In December 2013, the lid cracked again. I called Whirlpool customer service and they couldnt do anything. I called the Whirlpool corporate headquarters and was directed to a member of their executive staff. After explaining my situation, Whirlpool agreed to send me a new door free of charge and even pay to have it installed (which I told them I can do myself). Aside from the cracking of two doors, this washer is an exceptional unit. Its good to see Whirlpool stands behind its products this way, outside of the warranty period. I would guess that they always hear a lot of whining and complaining, but it seems if you explain things logically, people listen and are willing to help.

After owning the Cabrio washing machine (WTW5700XW, purchase price $629) for approximately 18 months, it began stalling at the spin cycle, leaving the clothes sopping wet. We found we had to unplug the machine to reboot the computer, and then we were able to manually choose the drain and spin cycle to complete the cycle. Before beginning a new wash cycle, we have to unplug to reboot again, or it sticks in a perpetual pump cycle.I scheduled a repair appointment from the Whirlpool automated service system. The repair man determined the computer control panel has to be replaced. Diagnostic service call was $136, repair est, $321.67, repair service call, $60-130. Total repair cost on an 18-month old machine was $520+. I declined the repair in hope of getting extended warranty coverage from Whirlpool. Nobody has responded to my email complaint from one week ago, not even a computer acknowledgment of receipt of my email.

This microwave lasted for 15 years! Worked great. Started looking kind of bad after 10 years but still worked. Amazing! All their products are great and last a long time. Would buy again. Boil water in minutes.

We purchased a Whirlpool water heater from Lowes in 2011. Everything was fine up until June 2015. We got the dreaded 4 flashes. We called for service to come out, that costed us around $300. December 23rd of 15 it goes out again. We called Whirlpool instead of a service company and the part was under warranty. We paid for overnight shipping but because of the holiday it was not guaranteed. We told them we are fine with Sat. delivery. In the meantime we had to cancel a holiday party scheduled at our house the 24th. We waited around all day Sat. for the part to show and nothing. We called Whirlpool to get the tracking number and we find out that the other service rep didnt mark our package for Sat. delivery. I am very close to just buying a new heater. I am trying to tell everyone I can about how horrible Whirlpool is. I feel sorry for any suckers that buy based on the name and dont do their research.

My wife and I purchased our new home in November 2014. The house was a foreclosure and therefore owned by a title company who gutted the home and installed all new appliances. Less than a year of ownership, the ice maker on the side by side fridge broke after normal use. Not having proof of purchase, I appealed to Whirlpool given the nature of my situation. They did NOTHING but try and sell me a new service agreement they offer to have it fixed. They cared little about my brand loyalty, situation or circumstances - all they wanted was to make more money off of the consumer. What ever happened to companies being accountable for the products they produce? What ever happened to companies wanting to do the right thing in order to retain loyal customers and increase satisfied word of mouth? Stay clear of Whirlpool... Theyre only out for themselves.

Bought washer, it broke down after 1 year. Repair man could not fix for less than $500. Told him he could have it and fix it and sell it. He turned me down. This week went and bought new washer. Told store they could take my washer and he said No. He told me any Whirlpool washer made in the last 2 years break down and cost more to fix than a new one. That I found out to be true. He showed me plastic circuit board not meant to last. They ripped off a very nice senior citizen. Thanks to my son for going and getting me a new washer. Shame on you, Whirlpool.

We bought a Whirlpool gas range about a year and half ago. The oven started giving lighting problems we had to light with a match every once in a while. Then the broiler igniter started giving same problems so I replaced the igniter, still did not work. Then I tried the control panel, still nothing. The igniters were about 45.00 each. The control panel was 250.00. Then I replaced the spark module and it is now working. Some models the spark module dont control oven and broiler but mine does. That was 200.00. The best thing was the part place I was ordering from would exchange the parts that you try and they also can answer questions either online or by phone, Appliancepartspros.com. My oven model # is wfg371lvs3.

Bought a Whirlpool stove five years ago when I got my kitchen remodeled. In fact bought all whirlpool appliances stove, microwave, dishwasher, and refrigerator. The dishwasher and refrigerator have already had some issues which to me were because cheaply made. The microwave and stove are fine.

Bought a standard 18 cubic foot top mount Whirlpool when moving into my first apt. The refrigerator cost a little over $500.00, is spacious and energy efficient. No ice and water in doors and no chip boards for any controls but still working perfectly. It is now 30 years old and never even serviced. When buying appliances get basic, do the job units and nothing with chip boards. They are still sold today and the fridge I have costs less now.

My Whirlpool French Door refrigerator will have its TWO year old birthday on September 15, 2015.. only if it lives that long! On August 8, one month and one week short of its 2nd birthday the compressor died. Of course the manufacturers warranty expired after one year. Thankfully, I purchased an extended warranty through the retailer. While this will cover my repairs, there is nothing that will cover the hundreds of dollars worth of spoiled frozen and refrigerated products which had to be discarded. I will NEVER PURCHASE ANOTHER WHIRLPOOL PRODUCT!

Purchased a new French door Whirlpool fridge May. It replaced a Whirlpool that was here when we purchased the home. Ten days after purchase the fridge went to 21 degrees and began freezing over food and drinks. Yesterday a tech replaced parts to repair the fridge. Today the fridge is once again at 21 degrees and freezing food and drinks. We live in a relatively rural area. Tech cant come back until six days from now. Very disappointed. Wish we considered another brand.

The inside glass of the oven door shattered. I have not used the oven for months. Only the the top cooking burners have been used. Its a mystery to me!! I have read complaints where the glass shattered while the oven was in use or being cleaned, but have found none where this happened to a cold oven. The large front burner is too hot. Even on the lowest setting everything burns. You cannot simmer, only boil. The control knobs have (in my opinion) no safety mechanism. I thought that the control knobs on stoves needed to be child proofed, hard for a child to turn on. My last stove you had to push down quite hard then turn to the setting. Not this stove. I have to be so careful when Im cleaning the area around the knobs. The slightest pressure and the knob turns. When I first purchased the stove while cleaning it, I unknowingly turned the knob and the kitchen filled with gas before I realized what had happened. I called Whirlpool thinking something was broken. They sent out a repairman. Nothing was broken. That is the way it is made. Customer Service said they had had no other complaints about the knobs. I find that hard to believe. My toddler grandchild can turn on the stove with ease. Im sure other concerned parents etc. have had this complaint. To sum it up... I will probably never purchase a Whirlpool product again.

My Whirlpool electric range has been a nightmare! I bought this thing 5 years ago and I am having it replaced on Saturday! It had a cleaning thing where I put in distilled water and 20 minutes later I could just wipe it out. Not true. I had to use oven off??? Next the oven would not work. Learned if I turned off the power it would reboot itself! The next thing it did was all on its own it turned the temp. from 250 degrees to a full BROIL. The oven now will not heat up to 350 degrees! I just blew $1200.00! On the other hand I did buy a Whirlpool fridge. It has been awesome!

I purchased a Whirlpool duet, model #wfw9550ww00, two years ago with added warranty. The machine stops mid-cycle. The time remaining flashes but no error code. Pressing start would begin the machine again. Sometimes, we could go several loads with no problems and other times it will stop three or four times in one load. Occasionally, pressing start would not work and the machine would require unplugging and restarting. We have had several service calls in. They have said it was the pump, then it was the motor, then it was the pressure switch, and yet the problem persists. They are due to come out again tomorrow for yet another examination to determine its cause. Its the third time in one month. Its a lemon.

The front of the stove gets so hot you can burn yourself and I feel it is not safe around small children or grandchildren, and it should addressed to fix the problem not just cover it up. Please give me the info to fix the problem before I have to sue over my grandchildren and great children getting burned.

Well, I read most of the complaints with the failures in the machine. I guess most of them didnt last long enough to rate their performance so here we go. I bought a Cabrio top loader, high-E washer a couple of years ago. This one had a different kind of agitator - it was just a couple of inches or so off the bottom. I specifically bought this to wash comforters and it seemed like it was good for that (rousing agreement from the salesperson). So after a couple of years of working with it, here are my observations:Pros: There are absolutely none!Cons: Okay, other than not having control over the settings (cannot override any of the preprogrammed wash settings), it simply doesnt get loads clean (yes, I use expensive HE detergent). Except for the bulky setting, there is never enough water to wash and rinse the loads properly. Next, it makes a mess of the clothes. At the end of the cycle, and this is true no matter what I wash or how large or small the load is or which cycle I pick - even light and slow spin, it just makes a tangled mess of the load. Stuff gets stuck inside of other stuff, wrapped around other stuff or are balled up. Never have I seen this type of issue. I constantly get the unbalanced load notice and have to manually redistribute the clothes most of the time.To address the too little water level, there are two options. I have discovered that the bulky setting has the highest water level, so I use that most of the time. From time to time (when I need different water temps or just want more water), I have developed a work-around by putting a Y adapter on the hot water inlet and a short hose. Once the washer starts the wash cycle, I stop it and add a bit of hot water to bring the level up enough to do a decent wash job - same for the rinse cycle. So much for Whirlpools water efficiency.Next, the hot isnt hot. Its barely lukewarm. So I turn the cold down to a trickle and I get a bit hotter water. It takes forever to rinse though. Its a good thing Im semi-retired. Next is the inflexible cycle/water selector. I have never had a washer I couldnt override to tell it what to do in unusual circumstances. Boy, what rocket scientist at Whirlpool dreamed that up!But above all, this just doesnt get loads clean. I have experimented with all the variables, load size, cycle selection, detergents, etc. Most of the time, I have to do two cycles with my loads and these are not unusual or extremely dirty loads. They are just normal, everyday laundry for an adult couple. Really, Whirlpool! Who was the conceptual designer on this? Thank goodness they werent working on the space shuttle or some disease research.Bottom line, I am so soured on the design and performance of this product that I will never buy another Whirlpool product, either brand name or generic (Sears). I just cant understand how a company would let something like this out the door.

Whirlpool Cabrio Platinum washing machine: You wont believe this until you call a parts replacement place for tiny part. The plastic (or vinyl) lid hinge bearings are located at hinge corners of lid. Hinge pin passes through them, one on each side. Half the size of a penny, UNCONSCIONABLE greed at the price of $32-$33 dollars EACH when ordered from a parts place. IMHO, design by INTENTIONAL failure to fail after three or four years. As a result, the lid will not stay up on its own. Then you find out the horrible news which is an insult to intelligence. Id have expected to pay maybe two or three dollars each, but NEVER the price they are demanding. Theyve got you and there is NOTHING you can do about it. At that rate, parts would run tens of thousands of dollars to replace the entire machine, part by part. These greedy clowns make car dealers look like reasonable people! The LAST Whirlpool machine of ANY kind we will EVER own!

Dishwasher is 15 years old and still going strong. Minor leak which disappeared when I cleaned the gasket. Good internal arrangement for fitting dishes & silverware. One of the best appliances I ever got!

Weve had our Whirlpool Cabrio washing machine for about 3 1/2 to 4 years. At first, it left our clothes wrinkled, so I purchased a steamer to help remove the wrinkles. After a few months, it started making a terrible clanging noise. My husband was able to repair and it ran okay for a while. Over a few months, it got louder and louder. It does not get our clothes completely clean. Some even come out dry on one side. Now, we are getting an F50 code and it shuts down after 1 minute. After reading the reviews, I agree Cabrio is a bad product. What happened to the trustworthy, best value Whirlpool name?

Whirlpool’s water heater coupler. Our plumber came to our home and explained how there was a problem with our type of water heater from Whirlpool that had been sold from Lowe’s between 2000 and 2006. We purchased ours in 2004. I have the receipt. Our plumber stated the underneath screen was clear and in good shape. He also said they had other water heaters with the same type of problem and those companies had provided the new part free and free shipping due to the suit. Whirlpool has not. We have been without hot water for a couple of days and we are hoping to have the piece by tomorrow. Since this suit has already been dealt with, then how do I get my money back from Whirlpool for being dishonest with requiring me to pay? Do I need to file something? I have followed the links and I have been researching it and our model number and serial match the product that was found faulty.

After almost 10 years, my Whirlpool top loader is now malfunctioning just like a lot of complaints here. It will not complete a wash because it keeps giving an off balance error at the spin cycle. I also had a coin get stuck in the discharge hose but fortunately it did not destroy the pump. I certainly dont want to sink any money into a repair especially because the techs dont seem to know how to fix the off balance problem. Im not much satisfied with my Whirlpool dryer either. It takes forever to dry a load.

It gets the job done. Its no power washer, but the dishes get pretty clean and dry nicely. I have no idea how dirty the dishes can be and still get cleaned, since Im weird and pre-wash my dishes. Its stainless steel and black, and has quite a few wash and dry settings, including an option for heated or unheated dry. The utensil rack is attached to the door of the washer and cant be moved. Two levels, and pretty easy to do dish tetris with. No offense to most standard dishwashers – I need a washer about 3 times the normal size due to a passion for cooking. Its slick and matches my ultra-modern, borderline-Swedish interior.

I purchased the Front-Loader Duet in June of 2008. Like many of the consumers here, my machine began making a thunderous sound during the spin cycle. I contacted Whirlpool and arranged for service. The service call was $129, the estimate was over $1100 to repair (bad bearing). The machine originally cost $899 plus tax. I called customer service to complain. I had owned two top-loader Whirlpool machines; one for 15 years, the other for 12 years with no service calls ever needed. How can Whirlpool possibly justify what is obviously a design defect by telling me that I should have bought an extended warranty? I replied that in my experience, an extended warranty is an unnecessary expense for a Whirlpool product.

Im 61 so I have some experience. I personally know fridges that have lasted over 20 years. I just Googled it and found out the norm is 14 to 17 years. This hunk of crap lasted 4 years. As soon as I got it home and plugged it in (4 yrs ago) the most noticeable thing was the noise. It sounded like a tractor! I considered taking it back (wish I did). Then after a couple of years the pull handle came off! The whole time we had to be careful the door was closing properly. It was problematic. Ive owned (and re-sold) about a dozen fridges in my life. This the first one to fail on me. It was bad from day one!

I purchased the Whirlpool Cabrio with the touch panel and top loader. The absolute worst. The machine leaves white marks all over dark clothes even when the extra rinse feature is used. Ive tried multiple detergents, skipping fabric softener completely, using very little detergent, and even tried different water temperatures. Nothing works. And should one have to go through such extremes to not have white streaks left on dark clothes? Absolutely not especially for the money spent.The machine wrinkles clothes like I have never see before. The dryer usually gets them out but not always. They are mangled after washing. Using the first or second spin speed helps reduce some but they are wetter going into the dryer that way. If I wash bed clothes, the tight fitting sheet that fits snugly around the mattress must be washed alone. If not, all the other items end up encased in it as if youve intentionally packed it that way to carry everything around. This leaves everything absolutely soaked. I have also had shirts come out with dry spots on them. How does a piece of clothing come out of a washer with more than one dry spot on it? And no I did not over pack the machine.I have had no problems with the dryer. It does its job so no complaints on that. I would not recommend the Whirlpool Cabrio to my worst enemy. Complete waste of time, money, and water!!! Very disappointed and will never buy from this company again and will prevent anyone else from doing so the rest of my life. Did the company do zero testing on this machine before selling it? Because I see a lot of repetitive reviews. Or the company was well aware and did not care and just wanted to make money? Either way is unacceptable. Garbage!!!

When I bought this stove, I already had a glass top (Sears) which was satisfactory but I changed to get a convection oven, never had a problem cleaning the glass top. To me, Whirlpool was, and I emphasize WAS, a reputable manufacturer and the stove offered everything I needed. Not so, the glass top is a nightmare to clean; no amount of elbow grease works. It is like cooking on a mirror. Talked to everyone I contacted but, it seems, I am the faulty element in this problem: I DONT KNOW HOW TO CLEAN!!! YOU NEED A FIRST OF SOMETHING FROM TIME TO TIME AND THIS WAS A FIRST FOR ME.They told me the only solution they could offer was to buy their own cleaner. Why do they need to market their own cleaner? I did not buy a museum piece that needed to be treated with special care, I bought a stove to cook on. I want as many people as possible to know about that uncleanable glass top. Every time I need to cook, I cringe at the amount of time and effort I will have to spend to get it clean. I am not a novice, I have been doing housework for the past 60 years. Beware, it is a most frustrating situation to having paid top dollars and to be stuck with a product that brings such frustrations. By the way, it was bought at The Brick in Canada. They were not helpful either.

Whirlpool Cabrio Model WTW6500 - I ask all of you to stay away from the Whirlpool Cabrio sets. I have spent hundreds of dollars trying to fix my washer. I just spent $260 for a computer board. Now it stays on rinse cycle. So now I need the motor sensor harness which is another $90. Service call $80 x 2. So, now I am going to take the computer board back and get my 260 dollars back. For the cost of $400 to fix this washer. You can go and buy a new one for around $400. Then, Im going to the lawyers to file a class action suit against Whirlpool. So, owners; be looking in your mailboxes for a class action suit against Whirlpool for those who own the cabrio set. Im tired of having to deal with whirlpool customer service. Maybe, whirlpool should think of having their laundry made back in America.

I have had my Whirlpool Washer for many years. It agitates well and my clothes are always clean. They are easy to dry. The wringer wrings out all the water, yet they stay damp for ironing. You will love this machine. I am happy with it and hope it lives for a very long time.

This is a good customer service (CS) review. Whirlpool knows about the defect and continues to distribute the fridge this way. We have a Whirlpool model #WRF757SDEM01 we purchased this year (2017). We love the size and the fact that the ice bin is in the door and takes up very little room. Our only complaint prior to this issue was the ice and water do not always come out gracefully. So we were happy overall till a large block of ice formed in the back of the fridge. My original call to CS was great. They did not ask me a bunch of stupid questions, just said that should not be happening and scheduled a service call.Service guy knew exactly what it was because he had repaired the same model with the same issue several times. It is a defect in the dual cooling/defrost system that Whirlpool knows about, but continues to produce. Two parts need to be replaced and one part had to be ordered. Which was not a big deal since two days were needed to thaw out the mini glacier. We lost food so I made a second call to CS and again there were no stupid questions or arguments. They got a $75 debit card in the mail to us. So I thank Whirlpools CS reps, but sure wish the manufacturing side of things were a little more diligent in production. Certainly this cost them money on all accounts.

Havent had any issues with it. Works great but does end up off balanced quite easily and halfway across the garage. Washes clothes like a maid. Is kinda small for bedding.

The Whirlpool hot water heater model ES80H123-45D from Lowe’s is a free replacement for a lifetime warranty unit that went bad after 8 years. First heater would heat to 154 degrees with a setting of 150. Very good. New one heats to 140 degrees with a setting 150 degrees. Digital ESM screen on heater reads 150, but the water is only 140 by my temperature test. I talked to complaint line 5 times in 7 days and was told to do various test, but the temp never went past 140. They replaced both thermostats and temperature still never past 140 with ESM reading 150. They first told me standard temperature was plus or minus 5 degree range. Then, they changed their minds and said it was 10 degrees. They are calibrating their equipment to operate 10 degrees less then their Energy Smart module reads to cover up a performance issue with their water heater. They say this unit will operate between 80 and 150 degrees—nothing’s said about a plus or minus operating range. I will buy a new temperature gauge to see if my old one is correct. It was tested against a digital one a couple of years ago when I had a new dishwasher installed by Lowes. The installers gauge read over 152 and mine read 154 degrees at the sink next to the new dishwasher, so it was close to accurate at that time. Whirlpool is happy with their under-performance.

The washer is a lower priced but basic machine with few bells and whistles. However this is what we wanted. Less tech with less problems so for us it works. Does the job it is required to do. Cycles do take much longer than our old machine did. Probably due to water conservation.

Whirlpool Refrigerator WRF736sdam13. Purchased from Lowe’s June 2015... freezing started in April 2019. Freezer bottom is not draining correctly and the bottom keeps freezing making it difficult to push door close. I have the extended warranty. This will be the 5th time on Monday, July 29 repair person will come out.I talked to Whirlpool and Lowe’s. The product cannot be considered a lemon because the problem continues to be “fixable” as stated from answering service when I reported the problem again. Customer service has been amazing up to this point. Anyone else have an issue with this model with the bottom freezing solid? Any suggestions?

Our Whirlpool Dishwasher model WDT710PAYW is less than 2 years old and is rusting on the outside of the door where the steam vent is. Apparently the hole that was made in the door for the vent was not sealed, now the paint is blistering up due to the rust. Will not purchase another Whirlpool.

Since purchasing original refrigerator 2 years ago I have multiple problems. Freezer was icing up to the point where drawers could not be opened, after numerous service calls, door was replaced which did not resolve problem. Refrigerator was replaced on warranty. Soon after light control circuit board had to be replaced. Next light control had to be recalibrated. Now, with the unit being approx. 1 yr old, rust spots are appearing on freezer door. Whirlpool rep advised this problem is not covered on warranty and would not provide any information as to what company contacts could be used to pursue the issue. Very upset and disappointed with product and customer service.

The reason for the call was to find out how to file a claim after replacing the ice maker and paying for it the 3rd time, they were very argumentative and would not listen to me about the design flaw in the wire harness that burns up the motor for the ice maker. I found out about the design flaw from talking to the repairman that replace the ice maker who works for Dick Kearsley Clearfield UT. He told me that Whirlpool knows about the problem for the 22 cubic foot and 25 cubic foot refrigerator and that is why they have 2 different new wire harnesses in the box for replacement of the old wiring harness.

You have to take into account that this microwave doesn’t heat up as others I’ve had so even if the instructions call for something to be cooked for 5 minutes, you have to add at least 2 minutes more. If not it would be undercooked.

My wife and I purchased the Whirlpool French Door Bottom Mount Refrigerator in April 2013. Thank God we purchased the extended warranty. In June 2014 the ice maker quit working and delivering water. We have had the service contractor that WHIRLPOOL has qualified for all repairs. They have set up FIVE appointments to resolve the issue, all of which I had to leave work to meet because they do not provide any scheduled service outside the hours of 8am to 4pm. The first time they came the service man told me that WHIRLPOOL RECOGNIZES THERE IS A DESIGN FLAW BECAUSE THESE ARE NOTORIOUS FOR FREEZING UP AND NOT WORKING. I asked the repair man if there has been a recall because of this, he said no because WHIRLPOOL WILL JUST REPAIR THE ONES PEOPLE COMPLAIN ABOUT! I called Whirlpool headquarters today. The advisor said he will register my complaint. I asked, Is that it? What does that mean? He said, I cant tell you what happens after I register the complaint. I WILL NEVER PURCHASE ANOTHER WHIRLPOOL PRODUCT. I hope this may help someone NOT make the same mistake. If you need to talk to someone in upper level management to discuss your issue, forget it...they want the position but no accountability.

We purchased a Whirlpool Cabrio washer & dryer in 2005. After CONTINUED issues with the washer during & after extended warranty, we decided to replace it in 2011. Im not a fan of mismatched sets, so we also replaced the the dryer. After researching the WP Cabrio, we assumed that model was a fluke and reluctantly replaced with the Whirlpool Duet Set. Nearing our warranty expiration, our new washer has stalled for the 3rd time. Sears customer service has been absolutely dreadful since day 1. Original delivery was scheduled incorrectly, so we ended up picking it up. We then spent the next 3 months trying to get our military discount credited back. They promised at time of purchase it would be credited automatically. After 2 hours wasted on the phone today, we are still without a working washer.. or even a date as to when it will be repaired. I was appalled at the condescending phone conversation I had with Sears rep. When service showed up last week, he knew immediately that 1 part was missing. He replaced the other 2 parts, and assured me hed rush the 3rd part and come back out today. Had I not called, we would be receiving a phone call on Friday to say our part was backordered and not available until June. After a long and frustrating conversation, I was told we could have a courtesy $25 max a week for laundry, with a max of $100 per year. I was also told that it wasnt Sears fault the part wasnt ordered when I called the 1st time, and so the 21 day wait period didnt start until the service man caught the mistake. If we hit 21 days from that date, they supposedly will do some sort of swap. I have confirmed with WP that the part is on back order, and frankly they didnt do anything either.. but the rep was much more apologetic. They couldnt do much because our warranty is through Sears and not them directly. My great niece is coming in 2 weeks for the 1st time since she was put on hospice, and I will be without a washer to clean her cloth diapers. She is on a very specific diet and has a feeding tube, so I will have to waste time hand washing clothes instead of savoring her visit. I will never shop at SEARS again. They have continued to go downhill with all the corporate changes. I left the corporate world a couple of years ago, and I can tell you that Sears doesnt take no or sorry from their vendors. Im very upset and intend to take this to another level, which I rarely do.

This seems to be a very common complaint with Whirlpool French door especially after reading other reviews. Bought a WRF560SMY in 2/2014, from Lowes who installed it and promised good service for that first year. Whatever went wrong, they would take care of it, replace if needed, pay for lost food, etc. So far, so good. Now in 7/2015, warranty is up of course!!! And we are selling our home, so thought I would get an extended warranty as another selling point that would transfer to new owners. Well, of course, right after I purchased the warranty, the day after actually, the freezer started buzzing. Took a look and the whole back wall of freezer was covered in frosty ice. So defrosted it, seemed to run okay... For a few hours, same problem. It sounds like the compressor fan is scraping on ice, and it runs continuously. Defrosted again, same problem. So now it is time to break down and get on the phone, which I hated to do since I went through this with Samsung in late 2013, took me 3 months to resolve. Anyway, called Whirlpool Michigan office, which I recommend. They claimed they would cover repairs, and to call their warranty repair dept. to schedule service. THEY told me I was out of luck, as my just purchased warranty would not be good for 60 days. Back to Michigan, they told me it WOULD be covered, and to try again. No go, and this time someone with a middle eastern accent told me not only would it not be covered, but even after the 60 days, it still would not be covered as it was a, GET THIS!!! pre-existing condition! Excuse me, this is not a brain tumor, and Obama did away with that anyway. So tried to call Lowes, who sympathized, but could not help since the warranty I purchased was from Whirlpool, but they would repair if I paid. And be aware that most chain stores require you purchase an extended warranty within 30 days of installation, so out of luck there, but they were nice about it, told me go back to Whirlpool. So another call to Michigan, and FINALLY got a gal at their call center in Tennessee, who resolved my problem in about three minutes. All in all, 12 phone calls. This is a manufacturer issue. she said, not a repair problem. which is what the others were apparently not educated about. It appears, although she did not say so in so many words, that this is a very, very common problem, and Whirlpool will indeed cover condenser or defrost heater assemblies for 3-5 years depending on the model. So she is supposedly calling a local repair and someone will be out in a day or two, but will call us first. No call yet, so still nail biting. I would recommend to all of you with this or other issues to read the manufacturer warranty very, very carefully. There are some things in there that go beyond the standard year, and I KNEW I had read that this problem was covered beyond the one year, and indeed, it is. And also to call, call. Call their Customer Experience Center in Michigan (1-800-253-1301) and if your freezer is icing up, you will most likely get them to fix, depending on the age of your unit. If you dont get satisfaction with the first person, keep calling back again and again, and get the NAME of the person you have spoken with and tell them to document your call. This saved me, as every call I made came up on their screen so they knew I was getting frustrated. But, she assured me, this particular problem is ABSOLUTELY COVERED BY WHIRLPOOL, so obviously it is a defect they know about. Why they dont fix it at factory, dont know but will continue to look for that answer. They got especially cooperative when I told them I was purchasing a home that would need all new appliances in the near future, which is true. Use the Michigan number and keep calling and calling until you get satisfaction. This is a covered repair beyond the one year. By the way, I do not have my ice cube maker hooked up and never did, but still had this issue. With this being said, I am very unhappy that yet another refrigerator failed on me. The Samsung after only 3 months, and the Whirlpool after only 17 months. But I will follow up on this report when and if these repairs are made in a day or two ;-] we shall see, and let you all know. The repair service is Whirlpool certified, so will grill the guy they send and see how many of these he has to fix, and whether it really is fixed So stay tuned. Just dont take your time and get frustrated talking with people who turn you down right off. Be persistent, and plan on about a dozen calls and two hours of your time. Remember to take notes of times, names, what was said, etc. This is the only thing that saved me with Samsung by the way. After 3 months they told me they HAD NO REPAIR PEOPLE in my area, and sent me a check for the purchase price to buy whatever replacement I wanted, but they also made me jump through many hoops, send pictures, docs, all kinds of stuff. Think I can almost speak a mid-eastern language now as well. Not so with Whirlpool though. It seems most if not all of their call centers are in the USA. Good luck to all of you. On my way to defrost again so we can get some sleep tonight without the chainsaw noise, and will update as soon as something occurs here. Hope I helped a little. As a PS, the last gal I spoke with was so very nice and knowledgeable. I told her she should not be taking calls, but promoted to training the call takers, and did take the time to call her supervisors and leave a message at how very good she was, which we should all do if we ever get a nice, educated person on the other end.Updated on 07/29/2015: I promised an update, so here it is. After thoroughly explaining my issue, they promised and delivered a repair person who arrived within the time they gave. He was very nice, but even tho they knew what my problem was, the guy did not have the parts onboard. He said it may take a week or two. So I am defrosting my freezer about every 48 hours to keep it from totally destroying itself. To the guy who exchanged his Whirlpool for a Samsung, I wish you a whole lot of luck if something goes wrong, and it will for sure. You wont get anyone who speaks English, but if you have a Lowes warranty, you may fare better. I can give you details on what will go wrong and how they deal with it if you want. I would advise you to have the Lowes warranty, and not a Samsung warranty, and make sure you get one within 30 days, or you are out of luck with Lowes. Good luck to you. Will update more on my Whirlpool, will say the repairman was very, very nice and gave me his card to call if I had more problems I could not solve myself until the part comes in. By the way, I do not use the icemaker and never did connect it, nor with the Samsung. I pity anyone who has to deal with Samsung directly and strongly advise you to get the warranty thru the store.

It washes everything well except the interior of the washer. And the filter is a pain also even when we rinse the dishes beforehand. The buttons are a pain in the ** to see without all of the lights on at night.

I purchased a Whirlpool water heater and after working fine for about 2 1/2 years, I began having problems with it staying lit. I dealt with troubleshooting beginning in January of 2012 and finally in March of 2012, I was sent some replacement parts. The unit worked fine through the summer and once the weather started getting cold in October of 2012, I began to have problems with the unit again. After a couple of months complaining and threatening to file a BBB complaint, I was sent all of the parts left to change on the water heater. And I was told after the parts were changed if the unit still did not work, that it was probably a venting issue and that I would be responsible for that issue and the unit was not defective. I received the parts on 12/04/12 and they were changed out the same day. Now the unit will light when I hold down the button to light it but once I let go, the pilot light goes out. At least before changing out the parts, the unit was able to be turned on and sometimes it would work and other times it didnt, but now it will not light at all. This is very frustrating because the unit is under warranty and Whirlpool has for an entire year fought me tooth and nail just to send me the parts for the unit, only for the unit to still not work. I have a family and it is discouraging to not know when you are going to have hot water, having to constantly fix the unit or to call Whirlpool to troubleshoot and finally for the unit to still not work after replacing the parts. It looks like I will not have any hot water at all now.

Updated on 07/09/2020: This fridge freezes produce. A part was replace to solve this problem but it has never worked properly. After several attempts to correct temperature fluctuation, Whirlpool decided it was working within their specs and advised us to set the temp higher to solve the problem. So we are doing that but now if the temp is too high the ice is watery and falls out of the ice compartment when we have finished using the ice dispenser. So we lower the temp and it again freezes the produce. Do NOT buy a Whirlpool!!! If you have any questions look at whirlfreezefood story...Original Review: Purchased September 2019. Worked for a couple weeks and then Freezes the produce. I have put it in the center drawer and in the main fridge still freezes. Go to ** for full story and recording of a message Whirlpool left me.

This washing machine has been the worst machine I have ever owned - I have called Paddys Market on several occasions to have a repairman come out and take a look at this machine, which they did - but the machine never got any better - it has never ever washed my clothes properly its a piece of garbage - clothes come out dirtier than when they went in and sometimes come out dry. Its so busy trying to save water - it doesnt use hardly any - and forget doing bigger loads - I WILL NEVER BUY ANOTHER WHIRLPOOL product again.

A couple of years ago I replaced my Whirlpool gas range because after seven years, the house was growing a gas smell that was becoming stronger. I called the gas company and they determined that it was the oven and not their problem. I called an appliance person who could not find the leak but charged me for the service call. Before I had him leave though, I called the gas company back and had the two talk. There was a conflict with their assessments. The service guy left frustrated. The gas company guy came back and again checked and told me that the oven is definitely leaking. He told me they use instruments, not soap, to determine leaks. With this, I was mad at the appliance company. After voicing my frustration, they were going to allow me to purchase a similar new Whirlpool freestanding gas range at a discount and deliver it for free. I relented and spent close to $600 for the new range. After installation, I realized that the quality was cheaper than my old one. The metal rods in the oven racks are thinner and less of them so they are further apart. The cooktop grates are already wearing and chipping. But the thing that has irked me the most is the burners. You cant adjust them to low for a long simmer because the flame goes out, not immediately, but when youre not around to watch it; and the whole house smells of gas fumes! I called the appliance store and they said that because I didnt buy an extended warranty and that a year has already passed, I would have to pay for the service charge. I called Whirlpool and they said that they have not encountered this problem with their stoves yet. Even while on the phone, I could turn every burner on separately and the flame would go out in a circular motion as I turned the knob to low. The only suggestion they had was to call my appliance company and have them look at it. I got nowhere and I was quite frustrated! These Whirlpool stoves should be recalled! Gas leaks are dangerous! I will never buy a Whirlpool again!

I purchased a Whirlpool Washer/Dryer set in June 2014. Yesterday, Sept 9, the motor stopped working. The machine was on but nothing happened. Called the repairman who said the motor burned out and had to be replaced at a cost of $180 plus $75 for his labor. I paid around $400 for it a little over a year ago and now I have to pay $255 to get it repaired which is ridiculous for a ONE YEAR OLD machine. I will never buy Whirlpool again. I should have read the reviews first before buying but I always thought this was a good brand. Lesson learned, never buy Whirlpool.

We purchased the washing machine on February 2, 2013 and initially noticed that some of the clothes were still dry when the complete load was over. Meaning that I am not saving water cost because I then have to rewash the clothes and pre-scrub the clothes. Then a little over a year later, the machine is making this extremely loud piercing noise when spinning. The cost to replace the part is $250.00+ the repairmans fee. Whirlpool says there is nothing they will do. From reading the other reviews, this is really sad because of the numerous people having the same issueS with a capital S. I definitely would support a class action suit.

I had this stove for less than 3 months and the glass top broke after turning on the stove. Now I tried to find out how to purchase a replacement but it cost as much as a new stove....Ughhhh this is so aggravating.

I have the Whirlpool Gold microwave model GMH3204XVQ-1 manufactured in May of 2010. The plastic around the lower door handle is cracking (currently in 4 directions from the handle) and the plastic on the side of the control panel is cracking in the center area and lower side. Neither of these area experience abnormal stress in day-to-day use. Unfortunately I could not get a good photo of the other crack on the lower corner of the control panel but included the one on the side in the middle. I contacted Whirlpool customer support about 1-2 months ago and to date, have not received any type of response or concern from them about this issue.

My Whirlpool Cabrio washer (WTW6600SG2) is a money pit! After reading all of the nightmare stories concerning this washer one would think Whirlpool would offer a recall and try to correct their wrong doing. Do not buy a Whirlpool Cabrio. It was the worst decision I have ever made! Whirlpool does not stand behind their products. I cant believe they can get away with treating their customers so unfairly, taking their hard earned money for crap like this, then not offering to help after so many have had issues. The Cabrio is loud, doesnt get clothes clean, and is always flashing UL for uneven load (when it works at all). My local repairman has made many trips to fix my problem Cabrio. This time he is at a loss. Ill be buying a new washer and it will not be made by Whirlpool! Please, if you are reading this be forewarned!! You will regret your purchase if you buy a Whirlpool Cabrio.

Whirlpool model WRV986FDEM Purchased May 31, 2017 from Lowes. Cost: 2,638.10 including 229.97 for the 5 year extended warranty. We’ve experienced four failures in the nearly four years we’ve owned this lemon. The first failure occurred within the one year manufacturer’s warranty period. The three failures since then have been fairly close together. Control boards and mechanical parts have been replaced. We are now waiting for a “made to order” part, with no scheduled delivery date. When I pressed Lowe’s on the reliability of this fridge, I was told that if four failures occur during the extended warranty period, they would give us a replacement. Considering the delays in repairs and frequency of failures, this is unacceptable. Do Lowes and Whirlpool expect their customers to just suck it up and do without a refrigerator for months while we wait? The warranty is worthless without prompt problem resolution. Whatever happened to real customer service?