I bought a range on 2/11/11. On 2/14/12, I cleaned the oven for the first time at high temperature and noticed burned grease marks which appeared at the inside of the glass in front of the oven. I called for service and the repairman took apart the door and cleaned it. He said it would probably happen again. There was a leakage somewhere and he couldnt repair it. I think it is a quality control problem at the manufacturing levels.

They attempted to fix our fridge, 1 year into owning, claimed no parts available. Never fixed, fridge died. Refused to repair. Offered us a 15% Visa gift card on another Whirlpool. Unacceptable, they can’t fix their product, and will never recommend anybody go through my familys $3,500 wasted fridge experience. Don’t trust them, they lie, and just escalate it to another liar in the customer service department.

My 5-year-old Cabrio started coming up with error codes, and not draining and spinning the clothes. I called a week ago, they offered me 2 options, one being put $339 on a credit card and that would cover all parts, labor, and a 1 year extended warranty. They charged the credit card immediately for the biggest piece of crap washing machine. Someone came out 2 days later and told me he has worked on a lot of Cabrios but never one in quite that condition. I was led to believe that after charging the credit card, boxes would be arriving with parts to fix it. I called 2 days later to find out the status of when it would be repaired and they told me they already put a credit thru on the credit card because to fix it would be equal to the price of 2 brand new washing machines, and they will do nothing to honor that agreement. So I now have a piece of ** in my laundry room and takes me two days to do a load of laundry. DO NOT BUY THE CABRIO! In fact Im not going with a Whirlpool ever again!

I’m disappointed in this dishwasher, it’s not yet a year old, and it doesn’t clean the dishes, and it also does not dry them. I now wash and dry my dishes by hand, the machine stays soaking wet even two weeks after running it.

I purchased the Whirlpool Cabrio Washer thinking I was purchasing a quality product. Unfortunately it was one of the worst decision my wife and I have made. The bearings (lower) only last about 2 years. We purchased the extended warranty and the first time it was covered. The second set were not covered and now we will have to change them again. We will not ever purchase another Whirlpool product. I contacted them several times with no positive results. I still saved the last worn out bearings to show the CEO. The engineers do not have a very good idea to make the lower bearing last. Where I purchased the machine they told me after the first change that it would happen again and they were correct. If anyone needs to contact me about this product feel free. NEVER EVER BUY A WHIRLPOOL PRODUCT.

I bought a Whirlpool refrigerator in February 2010 GS5VHAXWY00 side-by-side door ice maker. From the beginning, when crushed ice was used, the dispenser would freeze up. I had to remove the container to defrost. The container will not go back in place.Do not ever buy an indoor ice maker. I am out of warranty---very little help from Whirlpool customer service. They will be glad to send a service person.

I lodged a complaint of Microwave problem on 05/11/2011, and up to this date (18/11/2011), I am still waiting for the problem to be solved. I have a 1 year old baby. We cook food for him in it. Due to the microwave not working, he is suffering.

Love love love my Whirlpool range!!! Regular bake and convection!!! Huge oven, beautiful glass top, and 2 burners that have double surfaces to fit huge pans! It has steam clean feature too!!! Incredible and amazing price!!!

I am so frustrated with my Whirlpool Gold Wall oven with Accubake system. It has been on for 12 hours in clean mode. The door is locked. My home is full of smoke and even though I turned off the breaker so no power would go to it, it is still locked and hot two hours later. This is the second time this has happened. Not only is it a fire hazard, my walls are hot to the touch. It is frustrating. There is no override of the clean mode. BTW, I was baking when the inside light switched on and off and the door locked down. I was nowhere near it and it was the second batch I was baking so I did not touch the clean button. It did it itself.

Bought a $2500.00 fridge in Dec. 2012. By July, we were dealing with our 4th repair. Customer service in warranty department is non-existent. They act like you are a bother and have no right to demand replacement. I sent an email. No response. I wrote a letter to Corporate. No response. Not until I made comments on Facebook. Then I get a call offering me an extended warranty (which I already had purchased) so they said they would give another year (total of 3). This was a few weeks ago. I still have yet to receive anything or hear anything. This morning, our fridge is on the fritz again. I am loathe to have to deal with them again, but have no choice. Its either deal with them or throw out the 8 month old unit and buy something else. I should not even have to consider that. Whirlpool is a huge company. I do not understand their reluctance to just replace a product that is obviously defective unless they have no confidence in a replacement unit. This is so frustrating and upsetting to me. I did my research. I thought I was getting a quality product from a quality company. What a disappointment.

Buyer Beware!!!! Warning!!!! Dont buy Whirlpool. Youll be sorry if you do! Dont buy appliances from Home Depot. Youll be sorry if you do! Purchased new Whirlpool gas range 10/29/2019 from Home Depot. By February 2020 the front door fell off, its not cooking properly (18 min frozen pizza takes 30 mins to cook). Clock not keep correct time. Whirlpool unwilling to replace the unit while the third party repair company, “well you should have bought it from us, we stand behind what we sell.” They have no idea when or if the parts will ever come in due to COVID-19. Its been down 8 weeks now.Even under threat of a lawsuit Whirlpool said, Sorry we NOT replacing it, go ahead and sue us. We covered by our contractual warranty agreement. Home Depot said they are unable to help due to their contractual agreement with Whirlpool. I have a dozen hours invested talking Home Depot and Whirlpool on the phone and have no more information than I did a month ago. Whirlpool Case # **. Next step is small claims and public shaming of Whirlpool!

We purchased KitchenAid Model YKESS907SS05 Electric Range from Appliance Canada April 2012, just before we took possession of our new home. We began using the range in July of that year and it worked well until September 11, 2014. At that time we decided to use one of the features of the range which is the self-clean feature. During which the control panel failed and our oven ceased to work.We contacted Appliance Canada and they suggested a technician come to assess. We called the suggested number and they send a technician that was not Whirlpool certified and we had to pay out of pocket for the visit $158. He did absolutely nothing during the visit. We then called Whirlpool Canada and they informed us that he was not Whirlpool certified and to call Appliance Canada, we immediately called Appliance Canada and made arrangements to have certified technician come to assess. Whirlpool Canada also indicated at that time that the board that failed was still under warranty and we should not have to pay. September 22nd the second technician came to assess the situation, used tape to cover the front blowing air duct so as not to have the hot air blow back onto the control panel. This was a temporary fix, they ordered a control panel in the interim that they would then use to replace. The control panel came in October the 22nd, was replaced and the new board was faulty, put old one back in and re-ordered another board. The part was on back-order. By mid November, after numerous calls, we called Whirlpool directly. They authorized that the technician to get the part from another supply source. On November the 26th, technician came back - tried new board could not get it to work, left it with us and ordered additional parts. At that time the technician who was taking the case had a family emergency and would not be able to come back out until the new year. Subsequently, Appliance Canada authorized a new company to resume our work with a new technician (Toronto Appliance). He came out December the 17th, with the board that was left behind, he was able to get the oven working. December the 22nd while in the middle of cooking a meal, the oven failed again. We called Appliance Canada and they had a Technician scheduled to come December the 24th from Toronto Appliance. However, on December the 23rd the oven resumed working. The Technician came on the 24th but because the oven was working again could do nothing. On December the 31st, while dinner was in for guests, the oven failed yet again. We called Appliance Canada, yet again, and they scheduled another visit with a new control panel and additional board. The technician arrived again today, January the 28th, and could not get the stove working. He was instructed to order an additional part and we are to wait another 2 weeks. In total, we have been waiting for 4 and a half months, we have also been told that we were not to have used the self-clean as this causes these types of problems. Why is it offered, in addition, Whirlpool has not supported our direct calls, nor authorized the replacement of a product, that for all intents and purposes, is faulty. We have had no success in the resolution of this issue nor support to reach a resolution from all parties involved. I would suggest not buying any product from those involved as their lack of support for their product is appalling.

Does not get clothes clean. Period!! Takes just over 1hr. Noisy, lasted 3 1/2 years, transmission broke, take the warranty with a washer/dryer. Whirlpool was the top of the line, front loaders give less trouble, agitators clean better, go for the cheaper versions, our loaner Whirlpool, WTW4850H or WTW4950H washes quicker and cleaner than the Cabrio Energy Star.

This is the worst washing machine Ive ever purchased. Bought 12/19. The water level never never goes up high enough, to cover the cloths. I have to add water no matter what setting. I hate that. The sensor isnt working. You arent able to adjust it yourself, its computerized. The water shuts off when you lift the lid so you cant rinse out the soap or fabric softener caps. I hate that. The lid locks when the rinse cycle starts so I have to unlock the lid to add fabric softener. Why lock the lid so soon, wait till its in spinning mode. Really really badly designed!!!! Will never buy anything by Whirlpool ever again!

Rust started forming early on our washer and spread quickly. Our house is air conditioned and not near the ocean. There was no reason for the rust. Poor quality finishing is the only explanation. When I called to complain I got nowhere. I wish I could show a photo on this website. It would dissuade anyone from ever buying a whirlpool.

I took the time to read the owners manual, and then ran machine (washer wtw5000dw0). Using an affordable HE approved detergent (Xtra), I had no problems. If the washer doesnt fill or drain correctly, look up how to recalibrate it, was easy to do because I did that after transporting it. My clothes are cleaner, and I am using LESS detergent!

Fridge is over 20 years old. Definitely got money worth. Need to replace all appliances soon??? Which model next. So many models to choose. Love one with freezer on bottom.

We bought this washer from Sears with big hope. Within the first year, we had 14 service call covered by the warranty but required 2 to 3 weeks in doing without. Whirlpool replaced the washer at no charge but continued to have various issues over the years. The new one is the control module that Whirlpool knew was faulty but did not let their customers know. The control module went over the weekend but I repaired it myself and do not have any more issues. I literally went in and tightened all of the hardware, removed and install the pulleys, motors pumps and replaced a lot of keep components with better quality. Guess that year the CEO made only 20 million rather than 19 million. Being an American company I was disappointed by the consumer relations people but everything is a throw away nowadays. Will not buy a Maytag or Whirlpool product again. Where has American product pride gone?

I purchased 5 Whirlpool appliances when I remodelled my kitchen and am extremely disappointed with the quality and ability of them. The self-cleaning range (this phrase is a joke) has proven to be useless. I followed the cleaning direction according to the manufacturers direction even using the distilled water as indicated. The AquaLift self-clean did not clean the oven at all. It looks like I never turned the self-clean on. I gave up a great working GE self-cleaning oven that actually did clean itself. If I could afford to change this product for another brand I would do it in a heartbeat.

For years, Whirlpool has had an outstanding reputation for quality, so I cannot understand why a refrigerator I have owned less than three years has to have all the shelves and bins replaced. Not the glass, just the plastic. They actually started breaking the first year. I have literally had to tape my shelves together. These are very expensive and yet they are very low quality and of course are not covered on the warranty.The plastic is not built to withstand the cold and/or weight of food products. They need to get rid of the plastic and replace it with metal. I dont want to replace them with the same low grade products. I own the model ED5JHEXTB00 serial # HRU4010107. Also, the ice maker has been replaced twice. What has happened to Whirlpool

Ive always had good luck with Whirlpool. They last longer & dont have as many repairs. Ive had to have a lot of repairs with Maytag washers. The dryers didnt give any trouble. I recommend Whirlpool.

My Whirlpool Cabrio Washer is only 4 years old. I have had balancing & spin issues since day one. Thought it was just me. Constantly had to drain and spin after rebalancing. Now 10 days ago it cost me $250 to have it fixed. The aqcuator (?) Went. It wouldnt spin out. Now 10 days later it stops again. The appliance guy reads code. F7E7. He tells me the bearings are no good. Will cost another $400 and they need some special tool to fix it. IM DONE. My last set was 15 years old. The price is ridiculous and quality not worth what this triple capacity set cost.

Purchased Whirlpool Duet wfw9550ww00 in 2012 from PC Rich, who purchased machines in 5/11. Product stopped being made 5 yrs prior. Of course I did not know until my washer went and had service come to my house. He explained prior information, looked at my machine for 2 seconds and said someone put in a heavy load that machine was not able to handle and 2 belts broke and guts of machine are destroyed. Its a $799 fix, not including labor, youre better off buying a new machine. How does he know thats the reason for breaking??? The machine is 2 years old, not a scratch on it!!! Unbelievable!!!! Then states thats $114 for the service call. $114 for 2 seconds!!! Im absolutely furious!!! Whirlpool has a new program (if it helps anyone), if your machine is fairly new they will give you a invoice for 1/2 off a new Whirlpool... Take it from there. There should be a tremendous action lawsuit, look at all these complaints...

I bought a Cabrio washer. Since we bought it, I have had to fix it. The machine is a piece of junk. It looks nice though. After 5 technicians later, our piece of junk is still having problems. We are a poor family with 3 kids who struggle to make ends meet. I feel that this company has taken advantage of the people who put their trust in the so called American company Whirlpool.

Problematic... constantly out of balance... and will Not spin out due to this.. Sensors are very sensitive... have to unload and reload.. Most times have to wring out by hand.. Definitely a defect of these machines.

My range was made after this date and needs this Service Bulletin part. Whirlpool refuses to ship at no cost. I have spent money on this already to discover they knew the issue in April 2004 yet sold the range in October 2005. Rena in service stated she is the highest authority at Whirlpool anyone can talk to!

I feel the Whirlpool washer we have Works amazing. Its an older model and Im still happy with it. It does big loads without having to do it over again or on balancing itself. I have actually had a Samsung washer and we constantly had issues with it - sensor problems and was not very user-friendly at times. I also feel that a lot of the newer washers out there are cheaply made plastic parts and can break easily. Too many companies cutting Corners these days.

This is a top loading, with agitator, purchased from Costco over five years ago. It took some time finding a top loader, which I will always prefer. Very reliable. Have only needed repaired once. Have other Whirlpool appliances, very reliable.. Fridge over 20 years old and no problems, except needing new ice maker. Also, other whirlpool washer we had over 15 years.

I bought the Whirlpool Cabrio washer 2 years ago. It started recently messing up and making a loud noise during spin cycle and gave me a UL code. I called the repairman and he is stating several things need replacing. Cost more than washer did at time of purchase. Bearings and 2 other items need replacing parts. 550.00 plus labor of 250. I will never buy another Whirpool. My previous washer lasted 10 years. I got rid of it for a matching washer and dryer by Whirpool. Worst mistake and Im out a lot of money. By reading all the poor reviews. Seems like Whirlpool would do something. Its a ongoing problem. Many people have reported. I have read many similar experiences and wished I knew before purchasing this set. If you are reading this do not buy this washer and dryer set.

I purchased a Whirlpool Gold French door with the bottom freezer in October 2013. I had one repair done while it was still under the 1 year warranty, but by the time it was 18 months old, it began leaking refrigerant. I was told by the technician that the cost to repair it would be more than the value of the refrigerator, and the chances of the repair lasting more than 6 months were minimal. I had to buy a brand new refrigerator (not a whirlpool this time). I contacted Whirlpool customer service but they were non-sympathetic. Do Not Buy Whirlpool Products - Poor quality and high prices.

First my pump went out on a 4 month old washer. Had to wait several days for them to fix it. My washer worked for two weeks and same problem. Its been over a week and the service man cancels then shows up and tells me pumps out and can get one for several weeks. I cant stand them still not fixed.

Whirlpool Gold appliances are junk!!! Our dishwasher just stopped working one day. It was about 2 years old. We tried all the troubleshooting ideas we found on the internet. Nothing worked. I had a 13 Year old working dishwasher when I bought this one. Sure wish I had left well enough alone. I think there should be a class action lawsuit against Whirlpool. I had also purchased a new electric range... It is constantly giving me an error message when I try to use the oven. We have to flip the breaker and that sometimes helps. I bought 4 of the Gold appliances... I’m holding my breath on the other 2. I thought I had done a good job researching before I bought. I remodeled my kitchen. It turns out that a company that I believed was reputable and worthy of my business are not.

I bought my topload washer 2 years ago along with a dryer. The past month, the washer started sounding like an airplane, ready to take off, whenever the spin cycle was on. Then, it started to not start at all on certain cycles or would start to pump water in and then stop suddenly. I had a repair man in today, and it was not good news. He told me that he sees this a lot, especially with the Whirlpool washers and it is costly. The bearings are shot and will cost close to $500 for parts (alone), not costing the price to have it repaired. So now, I have called Whirlpool. The people there are very friendly and sympathetic. But even though I went as high as the supervisor (the highest authority I could speak to), he told me my washer is not on the recall list! I asked what it took to get it on one. Basically, my complaint was filed and end of story. Well, not quite. The supervisor was kind enough to give me the address for the Head Office for Whirlpool Canada. So people, start writing into this address and bombard them with your frustration: Whirlpool Executive Office, 200-6750 Century Avenue, Mississippi, Ontario L5N 0B7. If you have spoken to Whirlpool, ask for your reference number pertaining to your case and include it in your letter along with your phone number. In the meantime, I will be writing a lengthy letter; and I also went out today and bought another washer! Yes, it was not a Whirlpool, and I will never have another Whirlpool appliance in my home. And I will steer anyone away from this brand name. Good luck to all and start writing!

Just cleaning the outside of our piece of ** oven. Must have hit either the on or off button to lock because the damn thing locked. Tried unplugging it, pushing all the buttons suggested on these websites, etc. Hell, even tried to call Whirlpool, where I just talked to a computer. Lesson learned: Whirlpool wont get our business again. Period.

We paid $6,000 over and above my homes purchase price for double ovens that are defective. Whirlpool will not address the problem! When you bake a pie or a turkey, the bottom and center are raw, and the top burns, because the bottom element is hidden under the bottom of the oven, instead of on top of the interior floor area of the oven. Whirlpools new design is defective! The service technician says the oven is performing as designed therefore there is a design defect! However, Whirlpool will not take any action, because the parts are not broken and they send us back to the extended service plan people. It is ridiculous for the consumer to be caught in the middle. Whirlpool does not want to stand by their product.The builder of our home, Coleman Homes in Middleton, ID, purchased the ovens from Whirlpool originally. Therefore Whirlpool says we are not the original purchaser of the product, Coleman Homes are, and Whirlpool cannot do anything because we did not buy the ovens directly from Whirlpool ourselves, Coleman Homes did. The Whirlpool Warranty (waste of money) says they cannot do anything because it is not a parts issue. Coleman Homes says they cannot do anything because the warranty was given to us when we purchased the home. Whirlpool needs to replace the hidden element with a true baking element so the ovens will bake properly!!! Model Number: WOD51EC0AS Serial Number: D52208658

I purchased a Whirlpool dishwasher from Home Depot on 2/5/2015. It was delivered damaged on 2/9/2015. Home Depot refused to take it back and Whirlpool sent a tech out to see the damage. I told them I did not want a refurbished dishwasher that I paid almost $1000 for. Whirlpool advised Home Depot that the machine can be repaired. Once again I told both whirlpool and Home Depot that I did not want this dishwasher and to pick it up. Home Depot stated that there would be a 15 percent restocking fee along with a $65 to pick up the washer. Why should we have to pay anything? I am so disgusted for the treatment I received.

Purchased Whirlpool side by side June 2010. Within a few months realized major problem with ice maker. Reservoir on door would leak and freeze inside the door. Service man out at least twice, advised to maintain service contract as would continue to have issues. It still leaks, freezes up and does not dispense properly. Now the inside liner of the refrigerator is cracking and neither the warranty company nor the WHIRLPOOL Manufacture Co. will stand by their product. It is my intent to warn as many people as possible, so they will not have the same bad experiences.

My husband and I purchased a Whirlpool Washing Machine & Dryer a year and a half ago. As of current, the machine has stopped working. The machine will turn on but will not agitate. It makes a horrible grinding noise. The type of washer we purchased was a WTW4900BW0. Whirlpool told us we should have purchased the extended warranty. But, I feel we should get more than a year and a half out of a machine that cost $650.

Purchase a brand new Whirlpool fridge at the Fry’s Electronic in 2017. Broke down in 2018 almost 1 year after. Called Whirlpool company for replacing a new one. They didn’t replace before they had sent out a certified technician for fixing 3 times. It took forever to fix it, and still had the same problem after months. Finally, they agreed to replace a new one. Now I still have the same problem with a newer one which they replaced it over a year ago (including fixing and placing time). Just called to the Whirlpool company today for fixing or replacing, spoke to rep Sara, she said that it’s no longer under warranty because it’s more than 1 year. I told her that because the company didn’t replace right away; therefore, it has been more than 1 year; but from the time they replaced it, it hasn’t been 1 year. Ill never buy any Whirlpool products again.

We bought a gas Whirlpool Stove from Lowes. We noticed it was not heating like our last stove and thought maybe because it was new. No the stove does not heat properly at all. I cooked a pork loin for 40 minutes at 350 and it was still raw in the middle. I have had to cook everything on 375 which makes the door handles and knobs very hot. I called Lowes and they patched me into Whirlpool after a 45 minute wait. The rep from Whirlpool said, you can look at the manual and figure out how to calibrate it. No I cant. I have a warranty that is what it is suppose to cover. Then I was on hold for another 20 minutes. Really no one should tell you to read a manual to fix a gas stove. I will not buy another Whirlpool item. Poor customer service and that make you feel you are bothering them.

I purchased a Whirlpool washer in 2010. It has started to rust. I called the customer services dept. They told me that there was nothing they could do about it because it was over a year old. I asked to be transferred to a supervisor. She told me the same thing. I told her that its not as if Im looking for a new washer. She said that there was nothing they could do; I had to pay for the repairs myself. I told her, After spending almost $1,000 on a washer, I have to pay for the repairs? She said, Yes, maam. I asked if I could speak to someone over her. She said that she had to take down my name and number and someone would call me back in 24 hrs ... from the management team.She asked for my number and not my name and said someone would be calling back. I told her, How are you going to forward the message without a name? Maam, Im sorry. Whats your name? I doubt if anyone will be calling me back. Whirlpool customer service sucks! They dont know how to treat their customers. Watch out for the warranty. What they call a warranty is not.

16 months after purchase, the machine starts displaying F71 codes, 6 weeks later F70. After calling Whirlpool customer service number on the User Manual, we were told that the washer was out of warranty and there was nothing that Whirlpool was going to do for us. I have a reasonable expectation that a brand new $800 washing machine will operate for many, many, trouble free years, but finding an electronic failure that has been estimated at $400 to repair, 16 months after purchase, is simply and obviously unacceptable. This is clearly a defect in design and/or manufacturing.

We purchased a stackable electric washer/dryer unit and received in October. Had issues from the start. Called Whirlpool in Dec 2018 and they sent out their contracted service company. Told us they were ordering parts. Never heard from anyone. Called service contractor and they said never received parts. Called January. WP told us that because it was a new model, they didnt have the parts. We asked them to replace the unit. WP called us and said they would replace the unit and it would arrive in late January. NO CALL. Called 2/22 and said, no similar units available. Ask them to upgrade me if there were units available. Said they would and the inventory of the upgraded unit was promising. Would get a call from delivery company for a 3/6 delivery and install. 3/2: Called because hadnt heard from anyone and called WP. Today Katrina ID # ** tells me they are making the new upgraded unit with an anticipated delivery of MID MARCH. I just about flipped my lid. I asked for a supervisor of which she said she was a SR support specialist. I asked that this be escalated and I get a call regarding status. She advised that she would inquire and call me back. Likely shouldnt hold my breath or try to call back because you are on hold for up to 1-2 hours. Just to clarify, have never had an issue with Whirlpool. Every appliance we have in our home is Whirlpool. I just cant believe this experience. I am going to the media on my next stop.

My front load washer doesn’t get my clothes clean. I have to rinse twice and still there is soap in my towels and they smell bad. I’ve followed all the tips without much luck. Now I use only Oxyclean and rinse with 1/4-1/8 c vinegar. The machine doesn’t pump all of the water out of the machine either. To me it is low-efficiency!

I updated appliances in new house, but didnt realize the builder would choose the smaller side by side frigidaire. Could use a larger freezer space, also would like a ice maker that cut off when bucket is full. Overall I love Whirlpool appliances.

This $1,000+ Whirlpool Cabrio washer high-efficiency machine should have lasted between 10-15 years, not 1, not 2, not 3, not 4, not 5! To expect less is to fall for the consumer cave in - where you just give up, give in and buy another. The Whirlpool tech just told the appliance repair guy that was here that the repair would involve a recirculating water pump and a bearing, and would cost $481 to repair. The appliance repairman said he is not in business to condemn appliances, but said he has a Kenmore top loader at his house. Simple, no electronics and less things to go wrong. Well after researching brands and reading reports, I thought I was buying a machine that would last at least as long as my second hand Maytag. Whirlpool has not heard the end of me. I have heard several other people say the same thing. Repair bills are huge and machines do not hold up. So much for buying quality. Now Im going to contact the MA attorney general for the states implied warranty, which means if you spend your money on any appliance, that appliance has an expected lifetime of service. A $1,000+ machine is not expected to fall apart after a few years.

I have a Cabrio washer and dryer and have had nothing but problems. The tub bearing is going out and the washer makes a horrible noise. Now I am getting error codes and the washer begins a cycle and just shuts down. This has been the worst experience I have ever had with a Whirlpool appliance. The cost of the repair is not worth the hassle and I am going to have to replace it. They should be recalled by Whirlpool and replaced for free. I will never buy another Whirlpool.

I purchased a Whirlpool range YGY399LXUQ in 2012 from a great local appliance store, Trail Appliances. In 2013 the control panel stopped working and I contacted Trail. They quickly came out and replaced the control panel. In 2014 the same issue came up, but Trail could and would not do anything so I contacted Whirlpool Directly - they came out and replaced the control panel. In 2015 (same month) the control panel is not working AGAIN and Whirlpool has washed their hands of it. A replacement is over $400 + installation. The stove is barely worth that much. I would have thought that they would stand behind their product, in that this is an obvious continual issue or at the very least the service that they provide. I would not recommend their ranges to anyone because they will not stand behind what they product nor will I ever purchase anything that Whirlpool makes as it is obviously low quality.

I bought a top of the line Whirlpool front load washing machine (WFW97HEDW0) and drier with my new construction house. After a few months the washing machine began making a loud, banging noise during the spin cycle. Then about a month before the 1 year was up the unit broke and dumped all the water in the drum into the catch pan it was installed on. I called for service and someone showed up in about 3 days. The tech opened the unit and found that the plastic/composite drum the spin unit was contained in split in half all the way around. The tech exclaimed he had never come across this issue and would report in what he found but that he did not have the part and it would most likely be a whole new unit but that its up to whirlpool to make the call. I would find out that whirlpool had decided that the unit can be fixed and they have ordered the part and would call to schedule the repair.A week went by, with no word. I called warranty service company, Via Services, and they tell me that the part is on back order and that it would be two more weeks before it would come in. Now were looking at being without a washing machine for a month. I communicate this to the builder and they somehow get whirlpool to come out a week earlier than they said they could. The day came for the repair and two techs take nearly 8 hours to repair the unit (how is this efficient?).After the repair the unit ran with an odd noise that I attributed to the way it was stacked. A month goes by and two days after the 30 day repair warranty I go to do a load of laundry and the unit turns on but wont run. I called for warranty work because it was clearly not repaired sufficiently. I schedule a tech visit which is for a week after. The day come and the tech says he cant fix the unit without charging me for the repair because it is now out of warranty and if I have the extended warranty then I need to set that up with the extended warranty group. I send him away because I had just paid for the extended warranty. I called whirlpool for the extended warranty work and they schedule a repair contractor to come out in 3 days.The repair contractor calls me directly to confirm if the unit is side by side or stacked. I let them know that the units are stacked and they say they cant repair it because its a two tech job and they dont have enough techs. They send me back to talk to whirlpool. Whirlpool then notifies me that because its stacked I have to either unstack it myself or hire someone to unstack it for me. Well, I cant unstack the unit by myself and why should I have to pay someone to unstack it when thats what the unit was designed for? At this point I am going back and forth with the builder to get a refund so I can replace the unit. I will forever steer clear of any whirlpool or subsidiary products. The products are flimsy and the service is no better.

I always appreciated Whirlpool’s quality, but this brand new stove in my brand new home is a disappointment. The top, back (control panel) gets extremely hot when the oven is in use. The burners are not as easy to regulate, and the broiler (which is under the stove, a negative for me) didn’t come with a broiler pan. That was an additional cost. I had service out in the first 60 days because the oven wasn’t heating properly.

I have front load washer and dryer; I have had them for 16 years and this year is the only year that I have any repairs done and it was only the dryer and it was minor repairs for parts and labor ($200).

I bought a dishwasher with a 5 year warranty. It broke just after one year of purchase and they are giving me the runaround with replacing after finding that the part the part needed to repair machine is no longer available. The warranty clearly states that they will repair or replace with same or comparable machine and they are refusing to do so. I am at my wits end and I have no one to turn to within Whirlpool as they say it is their decision how they want to handle warranty.

My $800 Whirlpool Duet Sport Electric Dryer quit working less than 4 years from purchase and needs a new electronic control board. My service tech called Whirlpool to confirm that this is the problem because replacing the thermal fuse did not solve the fact that my dryer wasnt working: Code F01. Diagnosing and repairing the dryer will cost me $375! I am deeply disappointed. I will definitely explore other brands before ever trusting a Whirlpool appliance because I know the company could have done more such as offering to cover or discount the $210 control board, because everyone I have talked with (friends, family, my appliance service company manager, Whirlpool customer service rep) agreed that this is a rare problem and that your dryers are engineered to work 10-12 years. However, as a company, Whirlpool gets an ** for customer service.

My experiences using Whirpool ranges and ovens have been very positive. As a matter of fact, that is the brand preferred by my family through several generations. Durability, reliability and warranties have been the main features we have found useful. Most of the ranges and ovens have been replaced at home, always with Whirlpool brand, but with added improvements that manufacturer come up with, in order to integrate our devices to the latest technologies. I would recommend this brand to the readers, friends and neighbors.

WTW4950XW2 - I purchased My whirlpool washing machine wtw4950xw2 from best buy in 03/30 2013 and it just stop working after 3 yrs. The manufacture warranty was only good for 1 year. I think companies does that on purpose because they know these new equipments are not going to last. I think before they use to have at least a 3 yr or better warranty on appliances. First it started making this loud sound when on the spin cycle, so I had a repair guy come out. He told me that the bearings needed replaced so (how does bearings goes out in 3 yrs). I asked how much will it be to replace parts/labor. The Parts cost $250 and the labor is $200. I might as well buy a new washing machine. I am so disgusted with this machine. My previous Whirlpool, which was not the new modernized, I had for at least 12 years and also I bought a whirlpool dryer. My Dryer stills works after 15 yrs. Im going to try to hold on to the dryer until the long haul. I wish I just would have gotten my old washing machine fixed. Now Im looking for a new washer and I wont be doing a whirlpool or anything with a push to start - just a plain old agitator, no sensing mechanism, just basic.

Buy a new in a box dishwasher, it is not working, not a good customer services, I wait 1 week for a tech to come and fixed, and I will wait to tech to come back with parts to be fix. Company not replace the unit, I pay for something that is not working. Very frustrated for the time waste. 3 day off from work.

I bought a Whirlpool water heater in March, 2008. Last time (not sure if its last year or 2 years ago), I had an issue of the water not heating. They have someone came in to replace a part. Recently a humming sound (scary one) keeps on coming on from time to time. It took me some days to find where the sound is coming from, and there it is, my fairly new whirlpool water heater.They said it has something to do with the orifice. Since I am not a handyman, they recommended a service guy to come in, and I have to pay. I wonder how much more I have to spend on this heater? Yes Im saving gas consumption, but it will be spent for service anyway, and I have the added bonus of frustration. It is not worthy having it. I spent $1,400 for the heater and labor.

I have had my refrigerator for a few years now. When I first purchased it, it was because of the brand and the looks. As far as performance it runs just as good as any other less expensive ones.

Our hot water heater (Whirlpool Mod # BFG1F404053NOV) stopped working. I called the Whirlpool help line and was advised to change the thermocouple as they had been having issues with this particular model. I was advised to go to Lowes, where we had purchased the heater, to get a new thermocouple at no charge to us. After changing the thermocouple, guess what? It still didnt work. I went back to Lowes and they replaced the heater, at no charge to us (they were great during this whole ordeal so no knocks against Lowes). Well, one year later, it’s the same issue. The pilot light will not stay lit. It’s very frustrating as it never goes out at an opportune time. In the past, the name Whirlpool ensured you were getting a quality product. I guess that’s not true anymore.

I have had my washer & dryer about 12 yrs. It has given me great service; however the spin mechanism on the washer stopped one month ago. It was replaced thru my home appliance warranty. I need the front loader style because Im disabled now, and cant take clothes out of washer. My previous set was Kenmore & it lasted 20 years. Looking to purchase in 2 months.

I bought my Whirlpool top loading washing machine 07-22-14. I so dislike the locking mechanism and will be certain to never, ever buy a machine with that feature again. It is so irritating to try to add something but cant because its locked so have to hold the button 3 seconds to unlock and start all over. If there was any way to get around it I would. I will stay away from Whirlpool products in the future and will be sure to check the next time I buy that the lid of the washer can be lifted when not spinning. Also, I do not like that it sticks on rinse sometimes and the only way to end a cycle is to hold the button and then start over with much wasted water.

I purchased Whirlpool french door refrigerator wrf535smbm00 at the beginning of this year and it has really made my house an unpleasant place to be. My main complaint is that it is very, very loud, and seems to vibrate through the whole house. It runs most of the time at a level of 60 dB, which might be considered a low noise level for a mechanical appliance that runs occasionally like a dishwasher, but is quite loud for an appliance that, according to their own specs, runs at least 40% of the time. Nobody wants to notice their refrigerator. They just want it to work.Which brings me to my second complaint, the temperature control is all over the place, generally ranging from 25-50 F. I find it difficult to believe that the government, which always seems overly concerned about the temperature of restaurant food, or the pasteurization of cheeses doesnt care that an appliance nearly every American household has doesnt necessarily do its job, and isnt required to display internal temperature. The old-fashioned set this dial to an arbitrary number and hope its cool enough is not charming.Finally, though the finish is listed as stainless steel, mine started sporting tiny rust spots after only three months. Whirlpool states that Cosmetic issues are covered by the manufacturers warranty for the first 30 days of ownership only. After the first 30 days any repairs for cosmetic issues are the consumers responsibility. It seems as though they know theyve used a low grade of stainless steel.

The silverware comes out all spotty and water stays inside cups and on dishes. I am going to have to replace all my utensils. They are so spotted that they look filthy. Knives, forks, spoons and all serving utensils. I have used this brand new Whirlpool dishwasher from August, 12, 2016 to today Oct. 21, 2016. I am very upset.

My Whirlpool Cabrio cannot wash sheets, blankets or any of this size. It balls up in the middle and form a bubble and only part of the items is washed and washing powders are trapped. I have purchased more sheets in the past 4 years than I have in the past 45 years of doing laundry, because the washing powders are not washed out. I wash on second rinse also, never fails and it still does not get all of it out. The clothing gets off balance if it was more than 3 small items. I have a leveling tool that I put on it often to make sure it is level. It’s something within the machine. I will never, never, never purchase any more Sears’ product. If anyone has jury-rigged this machine to work, please let me know. Sears has refused to help me, even today.

We bought a fridge in November 2013. Brand new, paid about $2400. After a few months, the fridge wasnt keeping our food cold, was leaking from the ice maker, and wasnt making ice. I called for a repair and about a week later they sent someone out. He assessed it, then came back a week after that to replace the part. Within a month or two later, the same problem. I called for service and was set up with a new company. The repairman called me a couple days later and instead of setting up a time to come in, he says its a common problem, he knows whats wrong, and he will order the part and call me next week to come replace it. A week passed, no word. I tried calling the man back, left several voicemails, and no answer. After another week, I call whirlpool again and tell them I heard nothing from the man and at first they tell me they cant do anything with it since it is an open ticket and I tell them thats not okay. They need to close it, he never even came to the house and assign it to someone else. After they tried multiple times to call the repair company themselves with no answer, they assigned it to a new repair company. Again, it was assessed, a part was ordered and replaced another week later. So now its been well into 9 months of having a worthless fridge. A few weeks after that part was replaced, the problem was back and I called again for repair. I was told if this problem is not solved this time I would be eligible for a replacement fridge. Obviously, it did not work so I called to have a replacement fridge at the end of August. I was told that someone would call me to set it up in 5-7 business days but maybe a little longer since Labor day was right around the corner. I waited, patiently. I called every few days for weeks until mid October and kept getting told it had not been assigned, they are really backed up, it will be just a little bit longer and they will send a message. Mid October, my sister in law called for me and she was told that it was denied because I had not had it serviced within the last 4 weeks. WHAT KIND OF ANSWER IS THAT??? Thats like putting salt on a wound!! I have had spoiled food, constant clean up of leaks, and constant wasted calls to get told that it was denied because it wasnt serviced in the last 30 days while I was waiting for a response from Whirlpool??? So of course I grab the phone and go off. They agree to reopen the case because it was denied for a bad reason. At this point, as I type this, I have been on hold for 55 minutes to speak to yet another supervisor because it has been 2 and a half weeks since they reopened my case and I am told it has not been assigned and the best they can do is send another message.

We purchased the Whirlpool washer less than a year ago and are now having the 4th transmission put into it. We are also having the 3rd timer put into it. We purchased this from Sears and bought the extended warranty (thank God). One of the times the technician ordered the parts to repair the machine. The service center sent the wrong parts and we had to wait an additional week for the correct parts to arrive. The 3rd transmission they installed lasted a week before it leaked gear oil all over our floor. When you do get a service call scheduled it will get rescheduled to a later date. This happened twice. They also cancelled the service call once before they fixed the machine. If I could give a zero star for this I would. DO YOURSELF A FAVOR AND DO NOT BUY A WHIRLPOOL WASHER AND DO NOT I REPEAT DO NOT GO TO SEARS FOR ANYTHING. Worst company to business with. I will say this that the service guy that comes out to do the work is a good guy. He stayed until almost 9:00 pm on one of the service calls. Hes been here so many times our dog knows him and doesnt bark at him anymore.

This is a comment for the person with the ice maker problem. I have a side-by-side, in-door ice dispenser that clogs up. First sign of problem is either the ice wont come out or it comes out crushed. What happens is frost builds up in the path the ice takes at a couple of different points. The only solution I have found is as soon as the problem starts I turn off the ice maker using the switch on the inside of the freezer. Then let it empty with normal use (if you wait too long youve increased your problems). The release button for the ice bin has frozen by now so you cant just lift it out. The bin needs to be empty. When it is empty, work the bin loose and take it out. Youll find that frost and maybe cubes have collected, frozen and blocked the passage. Be sure to turn the ice bin on its side and spray water into the undercarriage to melt and remove all the ice build up there. I use a hot sponge to melt the frost in the ice tube and then dry everything. This gets messy so be prepared to have water on the floor. Dry the ice bin and reinstall it. Ice cubes will be ready to drop from the ice maker so it wont be long until you have plenty. I live in Florida with high humidity so need to go through this process about once a month. Its a pain, but now it is just part of owning this unit. Good luck and hope this helps.

I’ve had this washer since October 2018. Worst purchase ever. It does not clean the clothes nor does it put enough water in it. I’ve tried the deep water option too and it’s for sure still not enough. I don’t understand how they even thought that this was perfectly fine to sell. If I could’ve taken it back a month after having it, I for sure would. And no one will buy it because they’ve read reviews of how it’s terrible. I wasted $900 on this washer. I have the dryer also which works amazing. The washer just sucks something terrible. My husbands military uniforms always look dirty and a lot of the clothes aren’t ever wet. I’ve finally seen a picture of how you’re supposed to have clothes in there. Why in the world would you only allow barely a layer of clothes at the very bottom to be cleaned by the agitator? Why would you have this huge drum only to put not even a load in there? This was such a waste Whirlpool and I’m glad I’m not the only person who has the same issue. I will never purchase another Whirlpool washer, it’s upsetting I can’t currently get rid of this crap washer I have now.

Design is made so you will need a repair man to clean filter. The machine has to be taken apart to get to filter. About one hour of your time. If youre not handy its a paid repair About $250 to $300. Also the valves that control the water into the washer failed after about 5 years. An easy fix part costs about $60. All appliances are designed to fail after the purchased extended warranty expires. More features more repairs. So if you arent going to use a feature get a simpler machine. More money does not mean better machine. Or that it will last longer. The days of an appliance lasting 10 to 20 years are over.

Whirlpool refrigerator model GX5F-IDXVB07; S/N K23918029; 24.8 cu ft purchased for almost $2,000 on 1/7/2014. Before it was four months old I had spoken with store about it frosting up the freezer drawer several times. Finally found it wasnt level and drawer was hanging. Ok figured it was ok, even though I had other issues with it. I took the cosmetic issue of false height on door, which made it seem larger and drastically size reduced produce drawers which made it necessary it actually cut off celery two inches to fit in drawer and door nooks being so narrow that they only fit 3 small condiments in them on the left door and its a trick to fit thing in the right, but since they are deeper can fit a little more. Ok thats my fault for not actually measuring. But who takes condiment jars shopping?The killer is that a leak in the ice maker, lets water/ice to build up under the ice maker on floor of freezer drawer. It then freezes there and if we dont take out the drawer and remove the ice chunks by hand it thaws and runs out in the floor about once a week. The leak began to be worse in August 2014. I understand it will need repair. What makes me really upset is the refrigerator is supposedly a very good brand and I have had so many issues with it that I curse it regularly. A two thousand dollar fridge with this many issues and I am stuck with it. I guess I should have contacted company before warranty went out, but we would get it past a problem for a while, then it would come back. I am just sick that I ever bought it in the first place! I hate it and will never buy or advise anyone else to buy from Whirlpool again. Quality is awful. Looks good on surface, stinks for quality.

Whirlpool Platinum Cabrio Washer wtw8240 - Ive owned this washer for two years. Worst two years of my life. Its leaked since day one. They have attempted to repair the leaking on 5 different repair visits (told me the nozzle that puts the water in the tub doesnt stop in time and it overflows on my floor). Finally it seemed to be somewhat fixed and then it started to sound like a freight train coming through my house. They determined the bearings were worn on my tub and had to replace the whole tub unit. Seven visits. I got one month out of it and it’s leaking again. I am now out of the extended warranty I purchased. This is ridiculous. Isnt there a lemon law on appliances? I know if a dealer attempts 4 or more repairs on your car for the same problem unsuccessfully, it qualifies for the lemon law. $800 for a washing machine that dumps water all over my floor and no one can seem to fix it. Well Im done, Whirlpool. Next time I will purchase a plain washer with no bells or whistles and it wont be made by Whirlpool!

Bought this machine June 23, 2016. First use, I called Lowes where I purchased it to say there is something wrong as it makes a grinding noise. I was informed that is normal for agitatorless machines. I asked if he could hear the noise, and he said yes, thats it. So I disconnected thinking, Wow, who makes a machine in todays technology that is so loud you think something or someone is in serious pain?! Now am at the point where I want this design in pain out of my house! Going to Lowes today to try and talk rationally for a complete refund so I can purchase an LG or Samsung which is what I should have done originally.

I bought a Whirlpool Cabrio a few months ago. Every time we do a load of laundry, the clothes are not getting cleaned. Dark colored clothing, including grey clothing, comes out of the washer with white residue, streaked all over the clothes. We have to rub the residue into the clothes to make it go away. If we attempt to dry it and do not get the residue scrubbed off the fabric, when the clothes get dried, there are white streaks in the clothes. This is extremely frustrating. We spend a lot of time getting the residue rubbed into the fabric every time we do a load of laundry.The local appliance store has told us that perhaps we are using too much soap. We have used nothing but the high efficiency soap, as recommended by Whirlpool, and have reduced the amount of soap per their suggestion. It is now to the point where we are using hardly any soap at all, in the hopes that we would not have to spend 30 minutes working on the clothes after every load. That has not worked. The white residue is still all over the clothes, and since we are using less soap, I dont think our clothes are actually getting cleaned.When we wash a load of whites, they arent getting cleaned at all, even when we use bleach. In fact, when I compare brand new undergarments with recently bought undergarments that have been washed a few times, the ones that have been washed a few times are noticeably different in color, they are actually starting to turn grey in color.I have used Affresh in the washing machine, per the manufacturers suggestion, numerous times. We had thought maybe that was the problem. But even the load right after the Affresh treatment leaves the white residue or does not get the clothes cleaned.This washing machine was close to $700.00, and I feel that for that amount of money, I should be able to expect clean clothes. I have never had a problem with a Whirlpool product before, so I had no qualms about purchasing this washing machine. At first, I thought maybe it just needed to get broken in, that it would stop leaving the residue after it had been used a few times. However, that has not been the case. I have tried everything I can think of to improve the performance of this washing machine, but nothing helps.When I contacted the local appliance store to complain, they suggested I cut back on the soap. I told them that I had tried that and it didnt work. They told me to use Affresh, I told them I did that. I asked them if they would take the washing machine back; let me trade it in for something else. I would even be willing to get a cheaper washing machine, I just wanted something that worked. They told me they couldnt do that. Even though I was still under warranty, unless it was broke, they couldnt do anything, and even then, all they could do would be to try to fix it. They couldnt take it back and give me a different washing machine.The experience I have had with this washing machine is the worst experience I have ever had with an appliance. I had always thought of Whirlpool as a trusted brand for appliances, but if this washing machine is any indication of how they now makes appliances, I will never buy another one of their shoddy products again; and you can guarantee I will be telling my friends, family, and coworkers not to buy Whirlpool products either.

After seven long years of one issue after another, about once a year replacing one part after another, draining the unit to replace parts, waking up to cold water, I finally gave up and replaced this Whirlpool water heater, model model # FD1H4040T3ENOV unit. Never to buy a Whirlpool unit again. Thanks for the memories.

Whirlpool Cabrio washing machine: The washer was purchased in March of 2012 and malfunctioned in December 2014. After phoning Whirlpool, the machine was scheduled for repair with a factory-authorized company. The first repair attempt was unsuccessful due to a lack of parts. It took 10 days for the parts to arrive, and another unsuccessful repair attempt was made. The verdict is that a new motor control board, costing $350 plus labor, is necessary. With the delay in service and cost of repairs, I may as well buy a new machine.

My Whirlpool Cabrio washer (WTW6600SG2) is a money pit! After reading all of the nightmare stories concerning this washer one would think Whirlpool would offer a recall and try to correct their wrong doing. Do not buy a Whirlpool Cabrio. It was the worst decision I have ever made! Whirlpool does not stand behind their products. I cant believe they can get away with treating their customers so unfairly, taking their hard earned money for crap like this, then not offering to help after so many have had issues. The Cabrio is loud, doesnt get clothes clean, and is always flashing UL for uneven load (when it works at all). My local repairman has made many trips to fix my problem Cabrio. This time he is at a loss. Ill be buying a new washer and it will not be made by Whirlpool! Please, if you are reading this be forewarned!! You will regret your purchase if you buy a Whirlpool Cabrio.

Went to Lowe’s, as my old fridge died. Gets delivered & guys wore masks. After they leave the NOISE of fridge I could hear in bedroom! I called right away had to wait for a replacement from XPO about a Week. Guy shows up stinking like ashtray, No Mask to “repair” my brand new Loud Fridge. Heck no was to get replaced. I called Lowe’s 3 times & XPO twice. It’s now June 4th. I’m still waiting! 25cubic Serial #HRX0654908. Horrible customer no service!

We purchased our Whirlpool dishwasher/Model no. WDT780SAEM in July 2016 and it was installed on August 3, 2016. Right away we noticed 2 problems. The top tray squeaks very loudly when being pulled out for loading and unloading. The usual temporary fix for this would be using a product like WD-40. Of course as soon as you run the dishwasher all of the product is washed away. This was our first complaint about this dishwasher. The more important problem was the white cloudy residue being left on all of our clear plastic cups and glasses. Weve always had hard water but our previous dishwashers were able to remove the residue if we used the high-temperature wash. After looking at all of the manuals and user guides that are included with the purchase we read that we should be using a rinse agent and a product such as Lemi Shine to deal with hard water deposits. We tried these items and nothing worked.Using the All Fresh tabs didnt help and our filter was clear and clean. So we made an appointment to have the Whirlpool factory serviceman come out to look into our problems. First of all the customer service representative I spoke with was rude and impatient. She kept cutting me off and asking me about hard water and suggesting that I use all of the products mentioned above before finding out that I already had used them to no avail. Because we had the dishwasher for just over 30 days I asked her about the Clean and Quiet Guarantee that I found out about by going to Whirlpools site. Her exact words were The clean and quiet what?? So I didnt have much hope for our service appointment. Our serviceman was asking all of the same questions about hard water and if we had tried all of the products I mentioned above.After his visit we found out and now (too late) know that because our new dishwasher does not have a heat booster or the ability to get the water temperature high enough to remove the hard water residue theres nothing Whirlpool will do for us. This is the case with all newer technology dishwashers UNLESS you purchase one with a heat booster. I sure wish this wouldve been made clear to us, the consumer before making our purchase. If we had known beforehand that new dishwashers no longer get the water up to 140 degrees which is what would be needed to remove the residue, we wouldve made sure our model included a heat booster. Now were stuck handwashing our plastic items if we want clear dishes. Its not the end of the world but its not good customer service or honest to the consumer in any way, shape or form.

We bought a Whirlpool gas range about a year and half ago. The oven started giving lighting problems we had to light with a match every once in a while. Then the broiler igniter started giving same problems so I replaced the igniter, still did not work. Then I tried the control panel, still nothing. The igniters were about 45.00 each. The control panel was 250.00. Then I replaced the spark module and it is now working. Some models the spark module dont control oven and broiler but mine does. That was 200.00. The best thing was the part place I was ordering from would exchange the parts that you try and they also can answer questions either online or by phone, Appliancepartspros.com. My oven model # is wfg371lvs3.

I bought a Cabrio washer in late 2015. All Ive had is trouble with this joke of a product. After three years it wont do any cycle, the people at Whirlpool dont care. Please dont buy any Whirlpool product.

I bought a Whirlpool washing machine, model WTW4855HW, and was I ever shocked at how noisy it was. The wash cycle had a grinding noise that was just too much. After 2 loads I sent it back and didnt regret having to pay the restocking fee. I just couldnt believe that with all the technology we have today, that they couldnt build a quiet machine. Im an engineer so I know there are methods through gearing, belts, soundproofing, etc, to produce a quiet machine. Remember the dishwasher of days gone by. You couldnt watch TV with the dishwasher going. Nowadays, you can stand in the kitchen and have a nice conversation with it running. The technology exists. As a matter of a fact, my old Maytag that finally went bad after 10 years was fairly quiet. So, if you dont have your washing machine in the garage or basement room where you can close the door, dont buy this machine! Bruce in Portland

My microwave came with my house. I didnt choose it but it has been a great brand. I love the preset timers for defrosting & for popcorn. Its big enough to handle an 8x8 pan which was important to me. The turntable could be more stable. My model is a built in over the oven option. Black & digital. It has lots of preset options & is pretty user friendly. I like the size & it is super quiet.

I purchase almost four thousand dollars on WHIRLPOOL appliances this month. From: HOME DEPOT 114 FEDERAL RD DANBURY CT. Received the items a week and a half ago 9/15/18. I was told to exam item no scratches, dents etc. I did that and had them put in place. I didnt get a chance to use washer until the fourth day. At which time realized it didnt work. Went over to store and they gave me Whirlpool repair phone number. Called and was told they only repair Mon - Fri 8am-4pm. I work every day until 5pm and off weekends. Told Whirlpool repair just that. THEN I TOLD by girl I was speaking to (Whirlpool repair) I COULD JUST RETURN THE WASHER TO THE STORE (Home Depot) MYSELF. I WAS FIT TO BE TIED. I told her, What should I do? Carry it on my back? I have never been treated so poorly. I just moved here from Florida, started a new job. I cant take a day off to have the washer that should have worked fixed. I will never purchase anything else from Home Depot if this is how Im treated, and Whirlpool their customer service stinks!!! So now Im stuck with a washer that doesnt work and a company (Whirlpool) wont accommodate their customer. (Whats wrong with this picture???)

It does not clean properly, if the dishes are not almost totally cleaned before putting them in the dishwasher. It has stainless steel inside, but the plastic holders have all had to be replaced. It is a large dishwasher that holds pots and pan. It is plain and has nothing outstanding to look at. Dishwasher are not meant to last any longer than 8 years, I have been told by a repairman. I will never purchase a KitchenAid, made by Whirlpool again!

I have 2 dishwashers. A stainless Quiet Partner III & a plastic Quiet partner II. The Partner III never gets the glasses completely clean. The cheaper Partner II gets everything clean but has had several service issues.

Remember the old movie classic Network, with the line, Im mad as hell and Im not going to take it anymore? Well, that is me and my new self-cleaning Whirlpool ranges that requires a manual cleaning kit (provided by Whirlpool after my purchase). I am angry enough that I have approached an attorney and I hope that if you have your own story about an AquaLift fail, you will include it on my website **. Thanks...

I am very disappointed with my purchase of the Whirlpool Refrigerator Model # WRF535SMB. As soon as the warranty ran out, it began having problems with ice build up in the bottom of the freezer. I see this is a common complaint and wish I had read the reviews earlier. The appliance is only 3 1/2 years old. Other complaints - impossible to clean the freezer. Mold build up on the seals. Glass plate shattered in a thousand pieces when I very gently set it on the counter.French doors, white, freezer at the bottom.

Five years ago I bought a brand spanking new HE set with a top load washer, top of the line Whirlpool. That washer has been a piece of junk and getting it serviced has been a nightmare. It broke, i.e., the computer part, and was out of commission for FOUR MONTHS. I live on an island off of Alaska, luckily I rented one for the duration but STILL. That was an EIGHT HUNDRED DOLLAR MACHINE. I liked that they are new and shiny and look cool. I hate that the electronics broke after a few years. Ive had washers dryers that lasted TWENTY YEARS. The next set I buy will have plain buttons for cycles and NO ELECTRONICS. None. And still none. Electronics instead of plain buttons. Im not kidding, I will never buy another one with electronics. I bought a top of the line Whirlpool HE top loading set for over $1400 five years ago and that washer has been a bust. I have had a repairman out over 5 times and the last time he took it out and kept it in the shop for FOUR MONTHS. I will never buy a fancy set again. I will buy the old kind with the plain old buttons. Do not make this mistake yourself! Just buy a plain old one!

My oven was 11 months old when I tried to use the self-clean cycle for the first time. 2 hours into the 4 hour cycle, the oven completely shut down, door locked shut and no lights on the control panel. The repair tech came out on a warranty repair call (no charge), explained that Whirlpool does not use a thermal protector rated for a self-cleaning oven and that it blows every time. He then proceeded to replace it with the same thing because he is only allowed to put in the recommended part, which is not rated for the high temp cleaning cycle. So the oven is usable, but not the self-clean. Since I am at the end of the 1 yr warranty period, even if I were able to get Whirlpool to replace the oven (ha!) there would be no warranty because I only get the original time limit. So if I had a new oven and it blew out, it would not be under warranty for fix/replace. The repair tech said this is a COMMON problem with Whirlpool self-clean.

I was gifted a washer and ventless dryer for my condo. It takes a little longer than a regular dryer but it works great. It fits perfectly in a closet.

A few weeks after we bought it, the washer was already having issues spinning out, and the clothes would have to go through another rinse and spin cycle. A bout a year and a half in and I had to replace the pump because it stopped draining. Even carefully loading the machine, and at least two or three times a week it would not spin out. Two weeks ago it stopped agitating actually performing washing action and spinning out all together. Last night I replaced the actuator which controls the speed or lack thereof in the spin. Still nothing. Ive reset it multiple times, still nothing. At least the clothes are getting wet. At tax return time I am replacing this piece if garbage and I will never get another whirlpool, or Maytag washer again because from what I have been told by dealers and repair men; they are all garbage.

On 11-29-2014 we were washing our laundry and our whirlpool washing machine started making a really loud noise so I went to investigate the problem. I open the bottom part of the washer to find out that the whole cement block to balance the drum was on the floor of the washer so I called the 1800 number on the machine and no one at whirlpool corporation wanted to even help. No one said sorry. No one said Let me see if I can help. No one. Every one I talked to they cant help at all. No one apologized once about the poor product that whirlpool sells and the defect that their products has. My washer is one year and one month old. So I can say truly with confidence that whirlpool product are the worst in the world plus their customer service even more. It is very sad after we paid all kind of money for our washer now I have to buy another one after one year and one month. Very bad customer service.

I have had my washing Machines since 2011 and have had continuous problems with the washing machine during spin cycle sounding like a freight train going through my house. Whirlpool has had people to my house 5 times to fix. When warranty was up in 2012, I was told they would continue to cover this particular issue. They came out again in April 2013 and now I am being told, Too bad; if you want fixed then you will need to pay for it.

I see that I am not the only one with the same pilot problem. I just purchased this new model that came out last summer. I bought my new water heater in September and just this past weekend, it messed up. I have not had it for 8 months. Whirlpool sent out a technician yesterday and he said the assembly is not good and the pilot would not light. Well they sent me a replacement part and they are coming out today to install it. The funny thing was that the technician said, Oh, these are hard to work with. We have a lot of problems with these models and they just came out last summer. Its the on that has the little box and you push the pilot button in and hold it until the red light comes on. Anyway, he said he didnt carry parts for that one, only the old ones which last longer. The ones that have the black round circle that looks like a thermostat. I said, Really? Well the reason I bought this water heater is because my last one that I bought 2 years ago kept having the same issue. Whirlpool sent me the assembly with the pilot and all 3 times and would never replace it. I got tired of it always messing up so after having it for 2 years, we just dumped it and went and bought this new model. Here we are 8 months since we bought it and the same thing is happening. I am so furious. I am pissed off that they dont recall these if they are defective. Why do they keep selling them if people have problems? My cousin called me a couple of months ago and asked if my husband could check her water heater and its the same type I had and it was doing the same thing. I will never buy another Whirlpool water heater again.

Whirlpool model # WRF989SDAM - Freezer quit. Tech says inverter is out. $480 later tech says evaporator is out and that Whirlpool covers sealed parts for 5 years. Call Whirlpool. They say not going to send a tech out for $130 to diagnosis the same problem already diagnosed and dont know if they warranty it or not. Cant get an answer from anyone but find the warrant on the Whirlpool website that nobody seems to know anything about. A $2500 fridge turning into a $3700 fridge should of spent the money and bought wolf appliances. Very disappointed in Whirlpool customer service or lack thereof and their knowledge of their own warranty and website. Be aware of this fridge and Whirlpool in general and not make the same mistake. I have our Whirlpool microwave has been replaced 3 times. We have only been in our new house 18 months!!!!

Cabrio Whirlpool Washer - Bought this washer from HHGregg in Orange Park, Florida. This washing machine is horrible!! It does not fill the tub with water enough to even cover the clothes. Some of the clothes are not even wet. They just sit in dirty water, no agitation. Then it refills with water and the rinse water is dirty, there is no agitation or movement during the wash cycle. My clothes are stained and dried food and dirt are still on the clothes. My white clothes are now gray. This is the worst machine. I have tried everything. I am now hand washing the clothes and trying to add water to at least cover the clothes but the sensor just drains the extra water out. This machine is less than a year old. There should be a class action lawsuit against Whirlpool. I am not the only one; everyone that has this machine says it is a nightmare.

Both are Whirlpool Commercial quality. I got them free from my Co-Op. They didnt cost me anything. They have been here for years - at least 18 years. They have performed flawlessly. I would look for anything discounted. I do not have a problem buying scratch and dent items or last years models. I am not big into brand names and their claims. My sister has gone thru several Maytag appliances in just a few short years. I will not buy any front loading washer, its top load only for me. The dryer has to be electric because we do not have gas in my Co-Op complex. I have been lucky to have only two washer and dryer combos since I was a kid. My family bought a Kenmore washer dryer combo in the 70s that lasted maintenance free into the 90s when I got the Whirlpool set that I have now. I only need the basics side by side set ups. Even though I live alone I do a lot of laundry. Since I have had these commercial grade machines I am more leaning toward another set of commercial grade machines. They seem to be able to take more abuse/over loading than the fancy expensive machines.

I also have a side-by-side Whirlpool Gold Fridge purchased from Lowes Retail Store, and I paid $1,480.00 for it. It is now 4 years old and I just noticed large cracks on right, inside part of the fridge. I called Whirlpool and got a runaround. Some lame guy said, Sorry, nothing we can do for you.When are people going to stand up for their rights and fight for their bucks? They havent heard the last of me but I will put this on the back of my truck with a nice sign on it for thousands to see. If anyone else has had this problem email me at ** and lets talk. I will never buy any Whirlpool items ever, ever again! Buyers beware! I also hold Lowes Retail Store responsible for this. They should research and stand behind what they sell, they are no better than Whirlpool!

Great front loading machine. Dont have the smell problems a lot of people that I know who have front load. Cleans all types of clothing very well. 13 years of reliable service with very little maintenance.

Ours is a glass top & has 2 dual burners & we are very pleased with that feature. The oven however takes quite long to preheat & the alert sounds are so weak you can barely hear them. It was a rapid purchase on a sale item. I wish we had shopped a bit more.