In October of 2014 we purchased our beautiful Whirlpool WRF990slam00 refrigerator from Lowes. We were super happy to have this big beautiful piece of equipment in our kitchen. From the start it ran a little loud but we were assured that this was normal. It seemed to function pretty well until 3 days after the one year warranty ran out. First thing, opened fridge door to a waterfall. Ice machine apparently was no longer working and 2 days later the fridge and freezer both stopped working and blowing warm air.Everything in the fridge and freezer had to be thrown out. I started making calls on November 2nd to see if Whirlpool would stand behind their $2,000 product and make good on repairs. It is now December 17th and we are still without a fridge. Not sure right now what is happening and I am afraid to call as I am sick to death of the whole thing. All I want is a fridge that works! Not too much to ask after spending $2,000. I am saving you the gory details as it would take me 10 pages but I have made SEVERAL calls. I hope to have Whirlpool step up and do the right thing but, I am not going to hold my breath.

I had the junky gas water heater for two years and cant keep the thing lit. Calling Whirlpool does no good. They give you the runaround; the store cant do anything. They know they have a faulty product and keep selling it. Some companies are only out for the money. If that wasnt the case, they would discontinue the junk. They will send you replacement parts but if you know nothing about them, you have to put out more money for someone to come and fix it. I would love to send them the bill! I would not recommend this brand of anything to anyone.

Brand new Whirlpool dishwasher from PC Richards. Model #WDT710PAYB2. Dont buy one of these! In the store, I was turned off by the panel being on top of the door and not visible when the door is closed. I dont understand why anyone would not want to see the cycles and operation but my husband insisted that was a good thing so I agreed to purchase. Well, its horrible! I pressed the panel buttons the first time I tried to use it, and the panel switch is erratic and all over the place. For example, if I press Normal, the Heavy cycle button light goes on. When I hit start, all the button lights shut off. I finally get all the lights to stay on and hit start (after about 10 tries) and when I shut the door, the start button blinks and beeps! The dishwasher does not start. After many attempts, I got it to run, miraculously, for about 10 minutes. It emptied the detergent dispenser and left everything inside wet and slimy. Nice. I cant believe Whirlpool would sell such an inferior product. I have always been a loyal Whirlpool customer, but after this experience, I think its time to switch appliance brands. Now I have to be inconvenienced without a dishwasher after spending over $500 and wait for a repairman. Thanks, Whirlpool!

The Whirlpool repairman left today after replacing the burned out motor on my 5 yr old dishwasher bought in Feb 2012 and installed July 2012 as did not arrive from Quebec to Surrey BC until the end of June 2012. So the Finish dishwasher detergent was in the dishwasher as samples and coupons and recommended this Finish for use in the new dishwasher so I stupidly believed them and used it. Well last week my dishwasher stopped working after it started and turns out today the cause was from the Finish dishwasher detergent. I was told today after paying 393 dollars for the repairs. Not to use Finish anymore or I will have the same problem. To only use Cascade. So what is a person suppose to believe.

I bought Whirlpool front load washer at Sears in June 27, 2012... (serial W104408696A) (W10409178A-SP). I had 6 episodes within a 1-year time that my clothes got burn holes and the inside of the washer. I would find a handful of gray powder after doing my laundry. The first time it happened, I thought that I left something inside my clothes that resulted to it, but I did nothing to contribute to the event. The second time it happened, I thought Im putting the wrong setting, so I chose another setting to wash my clothes. In that span of 1 year it was on and off happening. I read different reviews on this washer, and I am not the only one whos had this problem. Finally in 2013, before my warranty would expire, I requested for Whirlpool to fix the problem. Right away the tech told me that the problem was the glass covering, so they replaced it. Now my washer would not drain. I believe that this product does not belong in the market. If they knew what the problem was, they should have recalled it. I kept the sample of that gray powder.

Changing the filter is difficult & expensive. And where has the old fashioned service gone. New refrigerator and would have to pay for service. This happened when I bought the refrigerator a couple years ago. I do not think this should be the standard for a new refrigerator.

It took several delivery attempts to get a refrigerator without cosmetic flaw and it only lasted four years before Freon leak in evaporative system occurred. It would have cost more to repair than replace. Needless to say, I replaced it with another brand.

Recently bought and had a Whirlpool Cabrio Washer (from Orvilles appliances) installed in my home. The very first day I hated it. Worst purchase I have ever made. I spent over an hour picking hair out of my clothes, and hair was also stuck in the crevices of the drum. This is the very worst machine and company I ever had to deal with. They told me, Too bad. Since there was no mechanical problem there is nothing they will do. I will never deal with either of these companies again. I cant wait to see what the hair build up will do to the machine itself, Had it less than a week.

Whirlpool Cabrio - I have had the same experience as those others that have written reviews - over $1,600.00 (on sale) - approximately 3 years old and I was just informed by a service repairman that water has leaked from the center of the tub into the motor and it is trashed. I went to the Whirlpool website to chat with a representative and they are sorry but unfortunately, we cannot guarantee there will be no repairs or parts replacements needed as components do deteriorate or fail on occasion due to factors over which we have no control - they went on to say that since the washer is approximately 3 years old there would be no assistance that we would be able to provide toward repairs. I agree that a class action suit should be considered since Whirlpool is taking no responsibility for a machine that costs too much - makes your clothes smell and lasts for such a short time. Highway robbery!! The dryer is no better but at least it is still working (today anyway!).

We acquired the Cabrio Six Sense washing machine through the purchase of our new home, and quickly realized why it was left behind. This thing is pretty and has lots of bells and whistles, but that is where it ends. I am very surprised to find out that Whirlpool put such a piece of junk out for purchase. I have owned Whirlpool products in the past and had great performance and quality. We will be pulling this hunk of junk from our laundry room and installing the GE washer that we already owned immediately. Anyone want a free washer?

Im guessing the company that makes Whirlpool appliances no longer make dependable appliances… bought home 2 yrs. ago. Bought Whirlpool over stove microwave and expensive side by side fridge. After 1 yr. microwave stopped heating. Now my fridge is no longer cooling. Have cleaned it underneath, did all a normal person would do. I replaced my microwave last year with a Maytag. I’m sure I will have to replace the fridge very soon. My stove is a Maytag. Dishwasher a Frigidaire... have had no problem. Just the Whirlpools… Will never buy another Whirlpool. Not just me, my niece bought a microwave. Her stopped heating after one year.

WFW97HEDW, WGD95HEDW American made and equivalent to LG and Kenmore. Size fitted our space available. Price was a bit higher than the Korean models with similar or better features. We bought and returned three consecutive Whirlpool models from Sears. Though we never really got to put the dryers to the test, nor did they fail, the washers were of such a poor quality that they broke down within 1-2 weeks of installation. Eventually we switched to LG and have had no problems. When the Whirlpool fails it locks your clothes inside and to open and retrieve your clothes is just short of impossible. We really, really really wanted to buy the American made brand and we were willing to pay the premium to do so, but these washers were awful.

I too expected a whole lot more for the price I paid for Whirlpool WTW5000DW1 HE washer top load. Fuzz, grass, pet hair and food remain after washing. Had a repairman out to look at it. There is nothing wrong with it. He says they do not use much water to save money. Well, if I a have to wash everything at least twice am I saving money? Think. Will look into an old fashioned washboard next time. Frankly I think it is a scam. The HE Tide is more concentrated and my clothes do not come clean! Tried to get my money back from the company that sold it to me and I was told only if I were to buy the $900 Speed Queen. Someone’s making a lot of money from consumers who need washing machines.

I purchased a Whirlpool refrigerator in 2014. It is a side by side with ice maker in the door. About 8 month ago the ice machine stopped working. I called an appliance repair center and they diagnosed the problem as being the control board for the ice machine. After only 3 years this stopped working? I gave them to OK to fix it. A few days later I was informed that the part is on backorder for a few months. Well a few months has become 6 months and no part is available. I contacted Whirlpool and they called me and promised a solution, but then they never contacted me again. So it is almost 7 months later and I still have no ice. How can a relatively newer product break down and then not have a part available? Whirlpool absolutely does NOT care about their customers and does NOT back their products. Stay away at all costs.

I purchased a side-by-side Whirlpool refrigerator less than three years ago, but about a year ago we discovered it was leaking from the freezer thats located on the bottom. Initially we thought that if we simply defrosted the sheet of ice that formed on the bottom of the freezer - it would stop the leaking. Its hard to keep up with - I checked into it on the Internet and discovered that there is a clogged drain hole that is causing the leaking.Apparently, a number of people are experiencing the same thing. I called Whirlpool (since our local repairman suggested we contact them because this is a chronic problem and is likely to happen again). The customer service person kept pushing me to buy the extended warranty with their repair that will cost nearly $400!!! Without it - it will cost nearly $200 that doesnt include any parts. Its a new refrigerator, very bad quality and theres damage to our kitchen floor, and then Whirlpool wants me to pay $400 to repair the mess they made! VERY UPSET...

We purchased the Whirlpool Gold Series smooth top stove from Lowes in December of 2013. The stove is not even 2 years old and it doesnt work. Last September, I noticed a few times that while baking food in the oven, it was burnt after only 10 minutes, due to a runaway temperature. After that, the oven wouldnt heat up properly, it would take too long to bake anything because the temperature wouldnt reach the reading on the display. Then it just stopped baking or broiling all together with the error Feature unavailable. Weve had a serviceman out at least 3 times. Of course, the warrantys run out and its cost us close to $500 to keep fixing it, and two motherboards and a bottom element later, its still not fixed. They wanted to order 2 more parts at our expense, but we cant continue trying to fix this lemon. I will be shopping for another oven, and will never recommend Whirlpool to anyone.

Owned it for approximately 15 years and has never had any problems with it all. I would highly recommend this product because it is affordable and easy to care for. It even comes with a filter for water. Great refrigerator.

We purchased this washer and dryer new in 2011. Have repaired door to washer twice. New doors total cost $500.00 each time. Now it is cracked yet again and the dryer door has to be adjusted. The temp does not work right. Have to do minimum of 2 cycles for drying. Very unhappy. We may as well buy a new set of another make. Tired of the expensive repairs.

I purchased a Gas Stove from Home Depot on 11/23 and it was delivered on December 3rd. My God, Im having a dinner party tonight and the stove doesnt heat up past 170.. Unbelievable!! Need a replacement gas range. Tried to chat and call Whirlpool unsuccessfully. I am very one disappointed customer right now!

I am so unhappy and frustrated with this washer by far worst washer I have ever had!! Doesn’t wash clothes clean. Sometimes I have to wash things 2-3 times and then they aren’t necessarily clean. For what I had for this pair I really got ripped off!!!

We purchased our oven in February 2012. In April 2013, we began smelling gas. I called the gas company. They came within thirty minutes and determined the gas was coming from within the oven by using a gas detecting probe. The gas was turned off by the gas company. I contacted an appliance company who came out for $95.00 and used some type of spray looking device to check for leakage or bubbles to tell us we had no problem. Our warranty was only good for the one year. The appliance company ripped us off and Whirlpool was a bad deal. After reading of all the complaints of Whirlpool, I will not buy Whirlpool ever again. I will admit that the stove worked fine for the year. I was hoping for a longer life of this stove. Now, Im afraid to use it.

When you buy a global brand name you expect it to work the first time around. If not, then you expect to have it exchanged not repaired. The microwave did not work out of the box. They made me take it to the shop for repair. I would have expected an exchange for another one and an apology from the quality control guy who should have checked it. Apparently Whirlpool (Mexico) doesnt give a rats ass about their customer base. Its all about getting as many units out the door with poor assembly and no QC.

Unfortunately where I live the walls are thin. And my neighbors have complained about how loud my washing machine is. I load it correctly and sometimes while it’s washing it rearranges the clothes and it becomes unbalanced and makes incredibly loud thumping sounds when this happens. I’d say 1 out of every 4-5 times. Also I have multiple towels and clothing that have been pulled. The threads of brand new towel sets ruined from the washer.

We bought the Cabrio washer and dryer on June 2008, and it wasnt very long after that, that we had to have a repair done. Then, it started twisting the clothes and the sheets into a big knot. Two king size sheets and 2 pillow cases got so twisted that they are no bigger than a watermelon, and believe me, they are very hard to untangle when they are soaking wet. The machine in the drying cycle sounds like a commercial jet taking off. We can hardly talk above the roar of that thing. I hate it with a passion. Whirlpool used to be all we bought, but that is going to change.Linda

Bought a Whirlpool 25 cu ft side by side in 2011 and now just 4 years later the compressor is bad. Called them and they only have a 1 year warranty, which is nothing for a compressor. They told me for $350 they could replace it and it be good for only a year. Not going to sink more money into a product even the company has no confidence in. The repairman advised to stay away from Whirlpool as they were not the company they used to be. Also the salesman at Lowes where it came from said they used to have a 5 year warranty but changed several years ago and the quality also went down. We have had refrigerators last 25 to 30 years in the past but no more thanks to modern technology. Thanks a lot. STAY AWAY FROM WHIRLPOOL!

10 years, no problems with our 25 cubic foot french door Whirlpool refrigerator. Ice maker is a solid performer, with nary an issue. Temperature controls work flawlessly. The black frame looks great in our kitchen with espresso color cabinets.

Purchased a home recently that had a Whirlpool dishwasher installed within it. Havent lived here for more than 2 weeks. Go to use the dishwasher a week ago and the dishwasher wont turn on. Its brand new! We tried resetting the breaker and all the tricks on the website page. So we called Whirlpool to have them send someone out and diagnose the problem... a week later. The appliance repair man comes out and says its not receiving the proper voltage for the dishwasher to run. So I contact the electric company that installed the electric wires within the home and they came out the next day to check their work. The electrician found that there was the proper voltage coming into the lines for the dishwasher to run and in fact it is the dishwasher. So at this point Im back to square one and called Whirlpool again. At this point, I just wanted them to replace the dishwasher with a new one (same model, no upgrade) since it hasnt even been 30 days of owning the thing and its already having issues. I havent even used it once. I didnt think I was crazy for asking for a new one. Especially when the problem seems to be electrically related. They tell me another person has to come back out and deem the product unrepairable for them to exchange the product for a new one. They tell me its going to be yet again another week for someone to come deem it repairable or not. But wait heres a 75 dollar Visa gift card for your inconvenience. How about you spend the 75 dollars on hiring a technician to come fix it today? Had a similar problem with a LG appliance and they sent me a new one with no hassle without even sending a tech out to see if it was repairable or not. Buyers beware! Dont waste your money on Whirlpool. Clearly they do not care about their customers. They would rather spend more money in technician fees than to just admit their product isnt functioning correctly and replace it.

Bought a Whirlpool stove five years ago when I got my kitchen remodeled. In fact bought all whirlpool appliances stove, microwave, dishwasher, and refrigerator. The dishwasher and refrigerator have already had some issues which to me were because cheaply made. The microwave and stove are fine.

Ice maker has stopped making ice on several occasions. Also when you try to get ice out of the door dispenser, it will continues to release ice but will not go down the chute and when you open refrigerator door it spills out all over the place. Getting ice other than from the door is no easy task. I have taken to putting a bowl under the ice dispenser. Interior of refrigerator is not user friendly for positioning items. Bought in a hurry back in 2017 and have regretted it ever since.

The warranty on Whirlpool is totally useless!!! I purchased a new refrigerator from Lowes in September 2015. I have had to call 3 times because the ice maker quits working. (It has been replaced 2 times so far.) This time I have been without my icemaker for 6 weeks. When I called today - they informed me they would contact another repair company, but they could not come out for 1 month. They acted like I was bothering them - when I called again today - I did not buy a new appliance to have it break down every 3 months. They only use A & E Repair and Tri-County Appliances, and they must be so busy fixing other Whirlpool appliances that break down - that you have to wait 4- 6 weeks for a repair. Ridiculous!!

So far this washing machine has been perfect. Its a top load not front load which I prefer. Im not a big fan of how it locks and I cant throw other stuff in once it started. Other than that Im very satisfied.

I purchased the Whirlpool Cabrio HE top loading washer and front-loading dryer about 7 years ago. It has been okay, but nothing special. Recently it began stopping in the middle of the cycle and showing an F51 error. Then all of a sudden the noise during spin was deafening. Brought out a tech, who came and did some eval. Left with some basic maintenance. Did a load, and happily no more F51 code, but still so very loud during spin cycle.Called again; tech returned and said that drum and shaft would likely need to be replaced to the tune of some $500. The same story as others have told. We should have bought the extended warranty. Like others, I also felt that washers lasted at least 10 years. And that seemed a short time given expectations in the past of 20 years of service. Im disappointed in Whirlpool. Even though Consumer Reports gives the Whirlpool Duet washer (new 2013) one of its highest reviews, I cant bring myself to buy another Whirlpool product. It appears to me that this warrants recall as well.

I purchased the refrigerator (WRT3L15ZYBOO) from a reputable store (Lowes) on 10/15/11. 15 months later it failed. The service tech diagnosed complete loss of refrigerant. Cost for repairs would be more than half the purchase price and the wait for parts would be weeks. Contact to Whirlpool customer rep (Brittany) said no assistance was available, even for obviously a defective product. Solution: I had the store remove the defective appliance and purchased a new fridge (not Whirlpool) at about the same price it would have cost to repair the defective one. With delivery within 3 days, I likely saved time and money over dealing with Whirlpool. I had purchased a Whirlpool stove at the same time and am feeling quite anxious about it. Consequences: I plan to purchase a washer/dryer in the next year. No Whirlpool products considered.

Bought a Whirlpool Cabrio Washer Dryer combination on 4-5-2009, had it delivered on 4-20-2009, was very excited to get this set as it was like my first ever brand new washer dryer. I thought Id spend the money get something good and it would last for years and years. Was I ever wrong. I bought the set and the extended warranty from Lowes and my total with delivery was 2579.00. 20 days after the extended warranty expires (that I never used) the bearings on my Washer go bad. This thing in spin cycle sounds like a jet engine. I called to see if Lowes would still honor my warranty because I never used it and they said no. I called Whirlpool and checked to see if there was a recall and they said no. I checked to see if there is anything they could do at all because this is a huge known issue and of course they said no. (Just look on YouTube for Whirlpool bearing replacement and the amount of views should indicate the amount of troubled users.)Called a repair scheduled through Whirlpools website to come look at it for a 75 dollar assessment and they said it would be about 500-550 to replace the outer tub - largely due to the fact its labor intensive and the bearings are packed in the outer tub from the factory. I was like are you ** kidding me? I paid 1029 for the unit brand new in 2009 and 550 to fix? I said thank you to the repair guy and escorted him nicely out. Upon that I called back Whirlpool to tell them how displeased I am and how I will not be another product of theirs ever and mostly due to the fact they know this is a huge issue and wont do anything about it. I will be going to Lowes to see if the guy who sold me this pile of crap will work me a deal on another unit or set of another brand after I show him my receipt and express my displeasure with that product. If they wont do anything I will go to another store and spend my money elsewhere - I have choices and others do too. So if you are thinking about buying anything in the Cabrio line, dont. Go Samsung or LG - 10 year warranty straight from the manufacturer and costs 200-300 less than I paid for my washer dryer 5 years ago. The bearings are ** and shouldve lasted a lot longer for the amount I used this machine and for what I paid! Shame on you Whirlpool for using crappy parts to make your machines.

Got the dreaded 4 flashes LED status - High Temperature Shutdown. Online and vendor documentation says that this condition requires gas valve unit replacement, a $115 option. If your Pilot remains burning, but main burner does not kick in, then a good guess is the circuit board requires a reset. Prior to any further work, test the Thermopile, that is the round item with two blades located below and to the right of the gas valve unit. Move knob on control panel to OFF1) Pull out plug with red and white wires located on front of gas control. 2) Have someone Hold in the control knob on the unit at Pilot, and make sure Pilot flame is burning. 3) Using a multi-meter, set it to millivolt reading, and test voltage across the two wires. Voltage should be greater than 350mV, preferably >500mV. 4) If you get a reading in that range, your Thermopile is good. Turn knob to off position. Do NOT uncouple gas lines. 5) Piezo Igniter wire comes apart, disconnect it. 6) Remove screw that holds front cover. (screw located bottom left as you look at the unit) 7)Cover simply pulls off directly towards you. 8)Remove the screw holding the circuit board to the cover, and remove circuit board by unclipping it - 3 clips, one either side and one at bottom. 9) Unplug the 3 strand thermostat cable, you should now have the circuit board clear. 10) Take a piece of aluminum foil, fold it twice, then lay circuit board on it facing up, do it on top of tank, want it grounded. 11)Using one of the multimeter probes, wrap a piece of foil around it, keeping point free, and ground it too. Then slowly work around the board, touching all the solder connections you see, as well as the chip legs. Pay particular attention to the round objects on the board (capacitors), make sure to ground out each of the solder points, visible either side. (takes about 5- 8 minutes, take your time) 12) Once done, reconnect thermostat cable to board, then reinstall board into cover (dont forget the screw)13) Place cover back into place, screw in cover screw, reattach Piezo wire and black electrical plug with thermopile wires. 14) set Knob to Pilot, get pilot lit (may take a few hits on the Piezo button) and while still holding the knob in, watch to see what LED flashes you get (there will be a 10 second time lapse before it will start to flash) 15) You should either get 1 flash or 7 flashes, that means the board is reset, now turn knob to warm, and see if main burner kicks in. Good luck, and for a half hours work you have saved yourself $$$. PS: If it occurs again, you have sediment build up, need to drain the tank.

I paid ~$1200 for a new Whirlpool (French door top fridge and pull out freezer bottom) 7 years ago when I bought my house. I was so excited - and the appliance has been a problem from the beginning. It has always made a very loud knocking noise - even when it was new. I was told by the technician there was nothing he could do and Home Depot wouldnt help me with it either. My freezer has gone out three times - the last time was the day before Christmas Eve 2016 (a few days ago). I lost everything for my Christmas dinner that was in my fridge because that went first.Then when the service man came today, I was told it was the freezer that is causing the problem and everything had to be defrosted - plus they had to order a part that would take 3 to 5 days - so Im now going to lose everything in my freezer as well. All in all with the three service calls and the food I have lost probably amounts to around $800 - $900. I am so upset and cannot get any help from anyone. So, Im just warning you - NEVER buy a Whirlpool!

We have Whirlpool dishwasher for almost 10 year, very happy with the performance. This dishwasher is very quiet and also very spacious. The look and the price compared to other model is compatible and I will recommend it to other household. Thanks.

Whirlpool ED5FVGXWS refrigerator compressor failed after 24 months. No help from Whirlpool as the said 12-month warranty had run out. I do understand it’s my bad luck, but they really should try harder to back the products they make. Two years on a compressor is totally unacceptable. They could care less. I even proposed a $200 rebate on a new Whirlpool fridge. My bad luck wasn’t the compressor going out, it was buying the fridge in the first place. Shame on you Whirlpool! Viva la Mexico! They told me I could use it as a boat anchor.

My fridge stainless steel doors rusted on after Whirlpool Customer Service told me to buy and use Affresh (a Whirlpool product) to clean them! The fridge was only 12 days old when this occurred, imagine my shock and disappointment. Whirlpool Customer Service reps then sent me another one of their products Whirlpool Stainless Steel Brightener with instructions to clean it every day for 3 weeks and it would resolve the rust problem. It didnt resolve the rust problem. 2 repairmen from different companies have looked at the doors and shook their heads that Whirlpools own Customer Service department recommended a product for a fridge that rusted it and then they take no responsibility for it! Whirlpool knows these stainless steel fridges have the potential to rust. Its listed in their manual. Unfortunately, buyers arent given a copy of that manual to peruse BEFORE they buy the product. I would never have purchased this Whirlpool fridge had I seen that! I have now since read of other Whirlpool stainless steel fridges rusting.

I bought the Cabrio Platinum Set approximately 3 yrs ago. These is the worst products I have bought ever. The dryer didnt dry properly since day 1 w/the energy saver setting. I have always had to run a time dry in order to get properly dried clothing. Sometimes things still come out damp. The washer well the washer as I said the WORST product EVER. Approximately 3 yrs old and it leaks all over my laundry room unless surrounded by towels to suck up the water. During the wash it has the worst smell ever. And while spinning it jumps around and is so loud, you can hear it all through my 3 story home. We have complained we have written, emailed, called and have been offered nothing. I can honestly say I will NEVER buy another Whirlpool product again ever.The least they could do is stand by their product. For the price of this set it should have lasted much much longer. I had a Kenmore washer and dryer set that we bought it was not even top of the line I would say probably a cheaper model of theirs that lasted 10+ yrs we bought it brand new and my friend bought it when I changed to a front loader which by the way was one of the cheaper ones but was still better than this piece of **. It started breaking about 1 yr after we bought it. We have already fixed a few things but will not spend another dime on it. Now its not even cleaning. I now have to buy yet another washer. From what I have read either Whirlpool needs to up their game or just go out of business.

When I first got my energy eff washer it would not fill up with water. Only about 7 inches or so. Then I read that is you wet some clothes first it goes on wait before it starts. Works excellent with the agitator. Have done clothes without detergent and everything comes out clean. My beef is there is no lint trap so rely on the dryer to get rid of it.

The Whirlpool engineers need to go back to design room sober on this machine. It is only a year old and still I have to run one load two sometimes three times just to get clothes clean. How is this energy-efficient? I have tried all of their so-called remedies. Paying such good money for a lousy and lazy appliance is hard to swallow!

We have had this range in our new home and in use since May, 2019. The first range had to be returned after its first use due to flaking of the interior walls; a problem the company acknowledged. Since then we have been so unhappy with its ability to maintain the oven temperature. Contrary to the instructions, we calibrated the oven temp and found that it would vary up to 20 degrees lower than the set temp. When set to 350, it would come up to that temp and then cut off until it fell to 330 when it would come back up to 350. That is a great differential noticeable in the time it takes to heat an item and which greatly affects baked goods. A similar lack of consistency in control in the range elements is apparent as well. Now those are major defects. Minor defects are: it is NOT a rapid preheat at all, both lights are on when the switch is engaged even though only one oven is in use, there is no clock function when the timer is in use and the range surface is difficult to clean as it streaks which is visible with the black finish.

Posted the following review of this oven on the Whirlpool website: How did this get 5 stars with so many complaints? Ive only used this oven once since installed last Sunday. It heated my kitchen up at least 3 degrees. I live in the South so evidently its not meant for southern summers. It does look nice but if Id known the fan blows such hot air out of the bottom, I wouldnt have chosen this one. Afraid if I use the self cleaning cycle, it will burn my hard wood floor. Probably why there are many complaints about uneven cooking and long to preheat since all the heat is blowing out of the bottom. I received an email saying it didnt meet their website guidelines and they wouldnt post it. Interesting?!

We bought the Gold Series Whirlpool fridge (Model WRF990SLAM00) in December 2013. A few months after its first repair, (dripping on the top left inside of the fridge), which happened within the first year and was covered by the manufacturer’s warranty, it started to make an incredibly loud whirring sound that kept us up at night. Our bedroom is upstairs and far away from our kitchen, and I had to sleep with earplugs to not hear the noise. We tested the noise on a decibel app and it came in between 66-70. A normal fridge noise level should be around 52 decibels. We had a repairman come out and he replaced a fan even though he told me it wasnt going to fix the problem. Wait, what? After he replaced the fan and the whir continued, we called Lowes extended warranty again, and they sent out a different company: 1-800-Appliance.The second guy replaced two kits and found some issue with the ice maker, which we were not even aware of, but the noise remained, and he then had the gall to say it was a normal noise. If it was normal, wouldnt it have been making that noise the first year we had it? We had 1-800-Appliance come out again and he determined he couldnt fix it, so Lowes sent another guy from the same company, and he replaced the same fan that the first guy replaced, which was clearly not the problem. Three perfectly good fans were wasted. BTW, the repairman who said the noise was normal told us that the fridge had a part that was made to be replaced after purchase because if Whirlpool had the part at the point of sale, the fridge would not meet the Energy Star standards. Hello, lawsuit! After three repairs for the same problem and five visits that did not fix the problem, we were told Lowes would issue us a return order in three days. Finally!Not so fast... one week later, no one called, so I called them and then Lowes denied having told us that! We gave them the name of the person who told us they would take the fridge back, but the woman on the other end said she had no record of that (how convenient) and, despite the California lemon law requiring only three attempts at a repair, they would require yet another attempt by one of their repairmen. She told me that if he determined the noise was abnormally loud and not repairable, then she could contact the manufacturer and go from there. So they sent a guy from the first company out and he wrote down that the fridge was not repairable and was very noisy. He said that should take the fridge back at that point.My husband called Lowes several days later after not being contacted by them and they told him that they need to send a different repairman out from 1-800-Appliance and that only 1-800-Appliance could determine if we could get a refund. If that was true, then why send the other company out? By the way, the second guy sent out by 1-800-Appliance wrote down that the noise was very loud and wasnt fixed by his repair. But the notes Lowes said they received from him didnt say that at all. They told me that he wrote that the noise level was normal. I am starting to think there is collusion between Lowes and 1-800-Appliance. Something very wrong here. So, six visits later and horrible customer service from both Lowes and 1-800-appliance, we are now being told that the repairs need to be 30 days apart from each other before they will issue a return.If the cause of the noise was never actually repaired, then why do we have to wait a month between repairs? We continue to jump through the hoops that Lowes keeps throwing our way, but it is now clear that they have no intention of taking the fridge back. The fridge is less than two years old, and we have the extended warranty. We couldnt take the noise any further because it felt like it was causing hearing loss and after several months of that horrible sound we were both on edge, so we bought an amazingly quiet fridge from Pacific Sales, and they assured us that they would not do to us what Lowes did. Pacific Sales pride themselves with having good customer service. Lowes seems to have taken delight in lying to us, selling us a lemon, and then not righting a wrong.We have moved the loud piece of ** into our garage, and if Lowes continues to change the rules of a return and act in collusion with 1-800-appliance, probably in hopes that we will simply throw in the towel, then at least we dont have to hear that horrible sound in the meantime. If they dont do the right thing and take back the fridge, then we will simply keep calling out a repairman to fix the problem. We have three more years of our warranty, and if Lowes doesnt do the right thing, we will make them pay for this one way or another. Viva la revolucion!!

I purchased a Whirlpool dishwasher on March 13, 2007, along with a 3-year extended warranty. Well on Nov. 15, 2011, I had a part in the control panel go out, so they replaced it and they charged me $129.00 for labor and $29.18 for the part. My dishwasher is doing the same thing. It doesnt finish the cycle and I have to restart it, so I called the repairman A&E. They said the part is only guaranteed for 90 days. The part only lasted six months! Its the same part and the same problem. It should be considered a defective part. No matter how many you have replaced the part, it is going to need to be replaced and at $160.00, I cant afford it. They should have to pay for defective parts. Also on this model GU2600XTPSI on the panel buttons, the start button was made with this puffy plastic that has pulled apart and now it looks terrible! None of the other buttons were made this way. What a crappy workmanship, they should be embarrassed. This dishwasher was not cheap; it cost $650.00 plus $50.00 for the warranty. 4 years is too short of a time to have to replace any home appliance. There are appliance out there that are three times as old as mine and they are still working. I guess in the last 10 to 15 years, big companies dont care about their products or the people who buy them, just about their profits! I will never buy or recommend Whirlpool products.

It does not clean properly, if the dishes are not almost totally cleaned before putting them in the dishwasher. It has stainless steel inside, but the plastic holders have all had to be replaced. It is a large dishwasher that holds pots and pan. It is plain and has nothing outstanding to look at. Dishwasher are not meant to last any longer than 8 years, I have been told by a repairman. I will never purchase a KitchenAid, made by Whirlpool again!

I have always had Whirlpool Everything - not anymore!!!! I purchased a water saver washer that I am very unhappy with - it does not get the clothes clean. I have to put it on an extra rinse (water saver?) to get the soap out. I use the Tide for HE washers. I cannot wash a large load in it - directions say I can. Anything too heavy or bulky will not spin out well. Will bounce all over the place. From now on I will switch to another brand. They push so hard to buy a warranty because they know you will have trouble! Should have read the reviews!!

Installers left and Home Depot Cabrio washer stopped with water left in tub. I reset GFIC outlet, tried again and it stopped. Did some research and tried different outlets. Same result. I discovered that if you shut off machine as soon as the GFIC is reset, then the washer will drain no matter what. I have been on the phone with Home Depot and they have no solution but to wait one week for a repairman. Very dissatisfying service. Now I am running a 20 foot, 3 prong, heavy duty extension cord into living area where there are no GFIC outlets and it has been running. I believe there is a fault in the washer, but they must not care if we get electrocuted from the faulty grounding of their Whirlpool product.

Bought this unit for our daughter that lives in a apartment building. She loves it and keeping her cool at night.

I actually need help, we have had our over the stove microwave for two years, for the last 8 months it has inconsistently worked. We have to wait for the light to come on before it will come on and here lately, I have push on it to get it to work. This happens daily. Does anyone have any suggestions, I would hate to have to replace a two year old microwave.

We purchased this refrigerator towards the end of 2008. The entire interior of the refrigerator is imploding. The plastic Whirlpool used to frame the glass shelves is cracking and shards are falling off. There are 3 drawers; one has already fallen because the plastic sliders the drawer moves along has disintegrated. We noticed the small hairline cracks appearing some time ago but never thought they would go to this extreme. Apparently the plastic used cannot stand up to cold temperatures.I contacted Whirlpools chat and was told that the product is out of warranty and I need to place a service call to get new parts. I proceeded to email the CEO of Whirlpool, Mr. Fettig because I dont believe I should have to pay for a service call when its a manufacturing problem. I received a call the day after and was told the same thing; that they are sorry we are experiencing a problem but the warranty only covers the first year. I was told that if there was a problem with the plastic being inferior that they should have cracked in the first year. I responded that the cracks may have been occurring early on in the back of the refrigerator which is the coldest part but were noticeable.Its very frustrating because a refrigerator purchase is expensive and not something that I planned on doing a mere 5 years later. I believe that Whirlpool at the very least could have shown goodwill towards their customers and given at least some discount on the replacement parts or at the very least a certificate with an amount off toward the purchase of a new refrigerator. Its a win-win situation for everyone because the customer is still happy with their Whirlpool refrigerator and/or it guarantees repeat business for Whirlpool. Apparently Whirlpool doesnt care about keeping customers happy and want and/or need repeat business. Its the last Whirlpool I will ever purchase!!!

I bought a Whirlpool refrigerator because it was the lowest priced model that offered a bottom freezer compartment and fit into our available space in the kitchen. We also want a white coloured appliance. One thing we never noticed until set up at home was that there were no ice making trays nor an ice bin. We have had the fridge for five years with no problems. It is quite noisy when running.

Ice machine went out right after the year warranty was up. Convenient right? We called a hometown tech to come out and look at the water valve. He was unable to locate it, so we called Whirlpool service. After waiting 30 mins, they told us they cant tell us where to locate it for safety reasons, and if we wanted anything done to the refrigerator, we needed to pay a tech to come see it. EXTREMELY RUDE!!! I would NOT recommend whirlpool ANYTHING.

3-4 years ago, I had replaced my hot water heater with a Whirlpool, which was purchased at Lowes. On 10/23/11, I awoke to a flooded basement from the said water heater. When I entered the basement, I was able to verify that the water was spraying right from the casing of the unit. Who knows how long it had been spraying, but the place was a complete mess. The water was about 10 inches deep and many things were ruined. I proceeded back to Lowes and purchased another exact unit. This morning I awoke to the sound of what seemed to be water bubbling, only to enter the basement and see exactly what I saw just three weeks previously... another flooded basement from water just pouring out the side of the unit. This is an obvious defect in craftsmanship. Now I find myself with a flooded basement, no hot water, and a decision to make. Do I fight for another replacement or give up on the brand? A replacement water heater will solve my lack of hot water but for now, the question is for how long? Not to mention the cost and time spent with the clean up I did twice.

I was very excited about the performance of the washer as far as reduced water usage and reduced electric usage. After about 6 months though, I couldnt figure out why a lot of clothes, sheets and drapes came out with streaks on them. Very expensive to replace! Of course, the business I bought them from tried to get me to buy all types of fixes that had nothing to do with the problem and therefore couldnt answer me why this was happening. I am not crazy about a lengthy lawsuit. I am crazy about hoping the washer dies so I can go back to a less fancy washer that did the job better than this expensive monster!

WHIRLPOOL MICROWAVE HAS HAD MAGNETRON GO BAD 3 TIMES IN 1-1/2 YRS! I bought a Whirlpool Microwave Hood Combo Oct 2009. July 2010 the magnetron went in it! December 2010 the magnetron went in it AGAIN! This time we had to pay the labor to have it repaired because it was 2 months outside the warranty period. We did not want to pay because we knew having the same part go twice in one year that something is wrong with it. Whirlpool told us that if it happened a 3rd time that they would most likely replace the appliance for us. Well....July 2011 the magnetron went AGAIN for the 3rd time! Whirlpool told us to take it to a licensed shop to have it diagnosed to prove that it was the same part as the previous two times, fax paperwork from the prior two times, and have the shop call in the diagnosis of the 3rd time. We did all that, and they told us they wouldnt do ANYTHING for us because it was outside of the warranty period! Well they knew that when they told us we had an opportunity to get it replaced! THE SAME PART WENT BAD 3 TIMES IN A 1-1/2 YR PERIOD OF TIME. We trusted that the Whirlpool representatives were being honest with us during those phone conversations. Whirlpool can not explain why representatives would give us hope of a replacement (although each conversation is documented by their login and employee ID number). So not only did I buy a brand new MSRP $619 microwave, I paid to have it repaired the 2nd time, and to have it diagnosed the 3rd time, uninstalled and reinstalled the microwave each time, the inconvenience of not having use of the appliance during each occurance, and the unbearable suffering of calling in to customer service and repeating the story over and over to each representative. My house is brand new (we moved in to it November 2009); we bought ALL our appliances from Whirlpool. All I get for an answer now is sorry. That doesnt help me any financially having to repair and now replace an appliance that has been in use for only 1-1/2 yrs! I have seen $39 microwaves from WalMart last several years, so what is wrong with Whirlpools manufacturing?! Customer Service is unreliable, untrustworthy, non-sympathetic, and insanely frustrating! My question for Whirlpool is...why cant you make a product that lasts better (better quality=longer life=healthier environment and happier customers)? Why cant you stand behind your products better? Dont you care about the impact youre making on us emotionally, financially, and environmentally? The model # is GMH6185XVS0 Serial # is TRY3111264.

I purchased GMH6185XVS microwave in Dec. 2011. It was installed in January 2012. This was for a remodel kitchen with all Whirlpool appliances. In August 2014, we discovered the micro would not heat. I called Whirlpool as directed by Sears. I am told I have to call a repair service and pay for it. I have a 14 year old Whirlpool in my home. We have never had a problem with it. I had a Whirlpool micro in my previous home; never a problem. This is a second home that we hardly ever use. We are two adults. My daughter had the same problem with the same microwave. I am very upset with Sears as well as Whirlpool. Even if I used this machine everyday, it should not break in 2.5 years. Shame on both Whirlpool and Sears. I will never purchase another Whirlpool product again. I will be telling everyone I know.

Cabrio Washer - We were getting unbalanced load messages and the washer would stop. I called in a serviceman and he said it wasnt worth fixing. It would be cheaper to buy a new one. This washer is only 5 years old.

Bought a side-by-side with extended warranty model ED5VHEXVB01. I had a problem with the ice door. They came out, said they saw a bug, left no comments made, received no word from company. Finally, I called them to be informed on the bug problem. They canceled my warranty with no refund given. Now this will be the 3rd time I have to buy. The starter/overload relay fridge is only 4 years old (out of my pocket). I was told by a parts company this problem the company knows about and will not resolve. My advice is RUN, DONT WALK, away from ALL Whirlpool appliances.

I’ve had my Whirlpool Duet for 12 years and it has been a great one. I’m a mom of three sons, all of them wash their own laundry!! Lots of loads are done weekly and it cleans well! We leave the door opened after it’s unloaded so the tub will dry. Every few months, I put a tab in it so it will clean out all of the buildup. I don’t get the “front loader smell” that way.

We bought this product and had only had it for a couple of weeks when I spilled soup on the open microwave door. My mistake, but I would think that might happen to other people once in a while. The soup leaked around the window gasket of the microwave and streaked the interior of the door. It also ran down into the door of the oven and streaked the interior of that door. No way to clean this up that I know of without taking the door apart. I think these gaskets should not allow liquid they leak into the inside of these doors. Whirlpool says its my problem. They call it a use and care issue. I think its a design issue.

I cant begin to tell you what a pile of crap my Whirlpool range with Aqua Lift cleaning is! We purchased it brand-new and it is the slowest oven on the planet! If I want to cook a pizza I have to call home 30 minutes in advance so the oven will be 1/2 heated up. The Aqua Lift has never worked and the company has the most abhorrent customer DIS-service Ive ever had the misfortune to deal with! I hope these scumbags go bankrupt!!! AVOID anything Whirlpool! There is a class-action suit in the U.S. over what a slime bag bunch of crooks they are and how their Aqua Lift technology has NEVER worked!!

We bought a 20.5 cubic ft Whirlpool refrigerator. 2 months later it started cutting off, and on in a constant repeated cycle then run normal for a while. We had 2 Whirlpool repair appointments. The first guy said he couldnt come fix it unless it was acting up while he was here which was a intermittent issue. Refrigerators dont perform on cue. The 2nd guy came out after the first guy messed around long enough for the warranty to expire. We went ahead, and replaced the startup relay (most common problem). He replaced the control board, and wire harness. He said if that didnt fix it he didnt know what else to do. 2 hours after he left the fridge was right back to doing the same thing. He failed to report back to Whirlpool that the fridge couldnt be repaired. We contacted customer service, and their resolution was to get another repairman to come out, and replace the control board which had already been replaced. In the end they bailed on us, and left us stuck with a broke refrigerator, and we had to buy a new one ourselves. I might add it was not a Whirlpool. They spent $471 trying to fix a broken fridge, and wanted to send another repairman (another $100) to fix a $629 refrigerator how does that make any sense. It was a very disappointing experience, and Whirlpool should be ashamed.

I have purchased offloading washing machine in 13 Oct. Within three years it has given lot of problems. Every third month we have to call for service and spend lot of money. We had changed drain motor and condenser. Wiring is faulty. Machine will be down many times.

Purchased a whirlpool water heater 04/08/2005 and it worked for a short time. It had a 6 year warranty. I had to replace the thermocoupler assembly 1 time and it worked fine until last week. 09/02/1011, 4 months after warranty ran out, the unit started leaking severely from the top ? (Could of understood the bottom) here. After investigating further and being told to basically pound salt by the warranty number I called, I removed the top cove r(glued on by spray in insulation) and carved away the spray in insulation. All the bosses/threaded fittings for the inlet outlet and anode rod were all leaking under the insulation where it could not be seen! I know for a fact this unit was leaking long before the warranty expired! But because of the way it is built it is impossible to see it!. I strongly feel this was a manufacturing defect and there are hundreds if not thousands of these units in people houses all over the country!

I chose Whirlpool first then my machine became of I wanted a front loading machine with a larger tub. I wanted to be able to wash anything without hesitation. I truly love my wash and dryer. This set is the first set I have ever bought brand new.

The self cleaning work very well. All you need is clean the filter every time you use the dryer. I had the large capacity. I can wash my blankets and heavy clothes like commercial machine and the machine is programmable for your wash load.

I’ve been struggling with this new washer since I bought it a year ago. It’s sold as a water saver machine, but it continually leaves white residue and lint on my dark clothes that will only come off if rewashed with no soap and no other clothes. The technician who came out ran a cleaner through the machine and that was it. It’s recommended that the cleaner be used once a month, but it doesn’t seem to do any good. Per the appliance dealer I’ve reduced the amount of detergent I use to a tablespoon. I still get the residue. Definitely not a water saver and a crummy washing machine. Don’t buy Whirlpool!

Whirlpool customer service is non-existent. I have a Whirlpool microwave that burned up after two months of use, and they sent over a technician twice, in the past three weeks and it is still not working. Now, I am being told that it will take another two weeks before the correct part is found, and the technician is sent here again to fix the problem.I have no microwave now, for what is going to be about 5 weeks, and that is only if they get it right this time. Whirlpool wouldnt approve for me to have it traded a trade for a new one at HH Gregg where I purchased it in Aug of 2011. HH Gregg only has a 30-day return policy, and it went bad after 60 days.

Whirlpool Cabrio - good consumer rating. Ive had it for 2 years. It does not clean well and the clothes does not smell clean even though I often clean the washer and leave the top open when Im not using it. Ive also had it service 3 times because the rotator keeps going off and makes a lot of noise. I bought an LG dishwasher for $1300 and it lasted 7 months and completely broke down less than a year and had to be replaced. After I bought a $400 Whirlpool. It does the same job and Ive had it for 2 years without any repairs.

We have had this dishwasher since 1983 and we still run it on an average of 6 days a week. Features are the fact that it has given all of our dishes, our silverware, our pots and pans sparkling clean looks for all those years. It fits nicely into the kitchen space which was designed for a dishwasher. It never needed a repair. After all those years, this machine still looks fine. After all those years I really doubt if it still has a warranty and it never needed service.

I bought front-loader WFW8540FW1 in November 2017 from Lowes. I keep having problems with the washer not turning on. I am waiting for the repairman to come. Had repair done in March, May, and now June. I have gotten new electronics for replacement from Whirlpool each time. Obviously something is defective. Is there a lemon law for washers? Hope so. Never buy Whirlpool Washer again!

4 year old gas range, used self clean mode yesterday, for first time, upon completion opened oven door, not very clean and found 1/2 moon shaped raised crack in center of oven floor. Customer service insisting repair tech must come at cost of $60.00 to determine cause. I believe this is manufacturing defect, that they are not willing to admit. Offered big discount on new range. NO MORE WHIRLPOOL FOR ME!!!

Purchased 7/2015. LOVED it @ 1st being the key word. Notice grayish residue on clothing. Mainly on black. Towels discolored and lint on clothing. My kids were blaming dye in the detergent, & using Purex Crystals. I changed detergent to Armen hammer sensitive clear. Stopped using my beloved crystals. Wrong! Cleaned the rim @ the top of the agitator all the dirt & grime get ps trapped in the rims it helped some what. Additional problems occurred. From time to time started noticing unbalancing no matter the load size. Paint bubbling, peeling & rusting. The lid lock broken. Nightmare trying to get an appointment through Whirlpool. Referred to go to a dealer. Called Sears. Gave specific details whats wrong. Appointment 2 wks out. Service arrived, he had no idea why he was there. No info given. Then he said he doesnt have the part. He ordered it and said itll be sent to me approx 5 days. But wont be fix for another 3 wks. Same with 3 people from customer care. Informed this is not acceptable. Another problem now when unplugging it still stays on its hold electrical current. This can not be replaced until its deemed its broken & cant be fixed. They rather your home catch fire. They dont care about the inconvenience for 2 1/2 months.

Why am I not surprised by this stupid American company? I purchased a brand new fridge in June this year and for the last 5 months I have had about 20 different technician visits by five different technicians who changed almost everything you could possibly imagine - evaporator, control, sensor, compressor, display, etc., etc. And the company still refused to take any responsibilities. They kept telling me that more inspection was needed EVEN AFTER all the technicians said there was NOTHING THEY COULD DO. After having to yell at them for about an hour, they finally realized they had to issue me a new fridge. What a piece of crap they are. Even then when I called back about the exchange, they pretended they could not find my file. WTF??? They really tried EVERYTHING they could not to issue an exchange. Wow. What an incredible company and its customer service. I will never, ever buy another American product - nothing complicated with computerized parts anyway. They are NOT capable of producing such complex machines. They should stick with toasters or juicers - lol. Stupid Americans. LG and Samsung all the way baby!!! ** you Whirlpool.

I wish I could give negative stars! My Cabrio Model #WTW6600SG2 sounds like a jet airplane on the spin cycle (this started 2 months ago). Now, Im getting the UL error, its not an an uneven load!

I just love the durability of my machine and the features that it offers. It does a great job washing my clothes and I feel like its a solid appliance that lasts for many years and its good quality for the price.

The washer worked well the first year and has gone downhill since. There is mold on the rubber seal where the door closes. This was supposed to be a recall and was never sent the replacement part. We have to constantly use bleach to clean the rubber.

We bought a Whirlpool front door open washer machine from Best Buy on Oct. 2, 2011. We didnt start to use until our basement got finished. In November when the basement was ready, we found out that the machine didnt work at all. We called A&E factory service as suggested by Best Buy. They sent technicians 3 times in 2 months to check the machine. Now, it is 3 months later since we purchased the machine, the machine is still not working. We contacted Whirlpool, and they would not exchange to another machine, instead, they told us they will send another technician to check it once again. This machine costs us $800 before tax, but until now, it is still not working. Can you tell us what to do? We called Best Buy and they said this machine is under factorys warranty. So we called A& E service, who said that if Whirlpool called them, they will tell them it cannot be fixed. However, they need Whirlpool to call them because they work for Whirlpool. Is 3 month waiting not enough for a brand new machine to get fixed? And the worst thing is we still owe money to Best Buy creditor. Please help us to get rid of this! Thanks!

WOW!!! After reading all of these reviews Im wondering why I didnt see these sooner before I bought my POS Whirlpool fridge! Had our fridge a little less than 2 years and the freezer just does not keep anything cold anymore. Stopped making ice and everything in the freezer started to defrost. We noticed this one day when our ice cream was runny... Yuck! So we looked around online for troubleshooting. We took out the drawers and the back panel... There was a huge chunk of ice right before the coils. The coils themselves were not frosty and we thought that might be a problem, but we didnt know. So we thought this might be the problem. So we took a hairdryer and melted the big chunk of ice. After we did that we then noticed the coils started getting frosty again but not consistently or evenly across all of the coils. I dont know if this is good or not??? So now Im going to purchase a thermometer and see if the actual inside of the freezer is getting up to the correct temp. After reading all of these reviews on here Im thinking Im screwed!!! We also called Whirlpool and they basically said... oh well not our problem. WHAT A ** COMPANY! I will never buy another Whirlpool product again... Even if they offered me a free one I dont think I would take it.

It works great, it looks great. I been having for many years, and never gave me any problems. I do love nice microwaves and Whirlpool is a great. I would recommend it to anyone that is interested.

I have a gas range Model WFG540HOESO Airlift self clean. When anyone reaches across or leans against the range, ever so slightly, the knobs turn and gas is released. It is EXTREMELY dangerous. The Airlift self clean has never worked. When the repairman contacted the technicians at Whirlpool, they told him that there was nothing they could do. In other words, I am stuck with an oven that will not self clean. The water in the bottom does not even come to a boil.

We purchased the WRX988SIBM00, delivered 6-26-14. Immediately upon plugging it in, we noticed a seemingly loud hum to it. Thought maybe it would go away once the fridge cooled off, but the hum continues. SO sad because I love the features.

I paid over $1,000.00 for a washer based upon previous experience with Whirlpool appliances. I am single, over 65, and use this machine infrequently, as compared to when I had children. The only thing Whirlpool is offering is another of their machines at a discounted price. I value principles more than dollars. I refuse to give them another $600+ as a reward for making junk which apparently should have been recalled. The part I need is not available any place Ive found online. And it completely controls the power to the machine. You cannot open the door, you cannot turn it on. I had two service calls to discover this part is not available.

Good Morning. We recently built a home with Pule in Nexton, which is located in Summerville, SC. The appliances we chose came with the dishwasher, stove and microwave. Everything other than the dishwasher has been doing great, but as for the dishwasher I am extremely upset...we are newly weds and received two nice sets of glass and at least 12 of them have been broken in the dishwasher. Please advice.

After happily using Maytag washers at my old address for 30 some years, I moved to my current address and in 2006 I purchased a new Maytag. In 2010 I needed service. I was advised it had a bad bearing and was not advised to repair as it would cost well over $600.00. I purchased a Whirlpool Cabrio top loading HE appliance.The Cabrio worked well until one day it made a horrible noise. Although it still worked, I called for service and was told it had a bad bearing and would cost $670.00 to fix and they advised against it. After the service call, it never worked again. I know things dont last like they used to but 4 years is ridiculous. I have been advised that Whirlpool bought Maytag. Is this what to expect from so called reputable companies?

We purchased this washer in April two years ago. I have had service people out twice to replace the lid. Tonight, my husband comes into the kitchen with chunks of something that I could not readily identify. He tells me the entire frame holding the light has rusted out and that the light is hanging into the tub! I followed him into our air conditioned interior laundry room and placed my hand under the rim. It’s filled with rust and the light is dangling down into the tub!

I purchased a Whirlpool 3 years ago. It was on the lower end for price so my expectations were not that high. It does an average job cleaning dishes so for the price I could give it 4/5. The pump and motor just went and had to be replaced. Almost the same cost as replacing the whole machine. The repair technician that did the work stated that this was a very common problem with Whirlpool in recent years. Of course this is not covered by warranty. So if you purchase a Whirlpool realize you are rolling the dice.

I called customer service because my pilot light would not stay lit on my 2005 Whirlpool water heater. I was told that I needed to install the upgrade kit and that the water heater was malfunctioning because of a lack of air and that it needed to be cleaned at the bottom. I paid for the shipping of the kit although I believe it is called an upgrade or conversion kit versus a recall for this water heater to save money and to get the consumer to pay for replacing defective parts. A certified technician installed the kit but the pilot light would not remain lit. He replaced the thermocouple, although new parts had just been received. This did not help either. The technician and I called customer service, which didnt resolve the issue. I also asked for a manager who would only agree to send out another conversion kit. There are three years remaining on the warranty but I am being told to keep replacing new parts with new parts until it works. That is unacceptable. Also, I was not informed that my problem is a recurring problem with this Whirlpool water heater that I purchased at Lowes.

I purchased my Whirlpool Duet Steam Washer and Dryer 4 years ago. My laundry never had that moldy smell. I paid for the set almost $2,900.00! Never again Whirlpool for sure!!!

This Cabrio Washer and Dryer are horrible!!! Dont ever buy one, they will not fix the F1 code, and Whirlpool customer service is non existent!! I hate this company, and will never buy a product made by them again! Be aware that Whirlpool makes products for Kenmore, Maytag, and a few others!!! I just want to spread the word about this washer! If you just bought one try and take it back for something else!!! STAY AWAY FROM WHIRLPOOL!!!

After having 7 refrigerators breakdown all for the exact same exact reason, a $12 part, Whirlpool will only take the stance that you could have bought the extended warranty. So theyre happy with you spending $150 each time the repair guy comes out. 7 refrigerators all for the same reason and theyre only 3 years old. Do you really want to purchase a Whirlpool product after that? We are a development that has furnished are condos with Whirlpool but will no longer.

My son purchased a Whirlpool Cabrio washing machine about two years ago and now it doesnt work. It was an almost $1,000 machine. You would expect a higher quality product. I always bought Whirlpool products because they were so dependable so I recommended my son to go with Whirlpool. Big mistake, the panel lights up but when you press the power button, nothing happens. I do not recommend this machine to anyone. Im wondering if anyone else that has purchased this has had the same trouble.

I have a Whirlpool Cabrio washer (Model: wtw6400sw2 / Serial Number: cu0271913) and I am very disappointed with it. The spin cycle is the worst--sounds like a jet engine and gives me the UL error message of unbalance load. The machine was purchased in 2007 but was kept indoors. I contacted customer service and they advised me to contact the repair service in my area to get a diagnostic analysis of the issue. Hello! I already know what the problem is after reading all these reviews! I cannot tell you how pissed off I am. I will never purchase anything Whirlpool and I will contact BBB as soon as possible. Come on, fellow complainants, let us continue to fight to get a possible recall soon! We all have the same problem because this is a manufacturing defect!

We have a 2 1/2 yr. old Whirlpool gas stove. We have had the mechanic here several times as it would not ignite. We also have had the control panel repaired twice as it melted. It is melted again but they will do nothing. I tried to clean the oven with their AquaLift technology and had to re-do it four times and still have residue which appears to be permanent. We are very frustrated with it. We have used Whirlpool appliances for over 40 yrs. but will not buy another. Model#WFG710HOASO, Serial#R21712236.

High end Whirlpool dual front loader washing machine model number WFW94HEXW2 died after 5+ years of less than moderate use. Used no more than once a week. Paid for a top end model. Had 2 mechanics look at it. Mechanically it is fine. The CCU is not working correctly and wont allow it to start. We replaced it, but to no avail. It is barely out of warranty at 5+ years old. Called Whirlpool and they said they would do nothing. Asked for a manager and she was rude to add insult to injury. Cant get to the serial number because the door is locked shut as part of the shutdown problem. Cant find original receipt so including a picture of the credit card purchase. Trying to contact retailer but so far have not heard back from them.

My washing machine would not spin dry. I had a new pressure switch replaced to a tune of $180.00 which was only 26 months old. I have always bought Whirlpool but this will be my last whirlpool appliance.

I bought the Whirlpool WTW 5000DW1 washer and dryer to go with it. Within the first 2 weeks the plastic handle broke on the dryer. Ive been using the corner of the plastic handle ever since to open the dryer. The washer is the worst washer I have ever purchased in my life. The tub doesnt fill up over the clothes half the time. It is perfectly balanced on the floor but it always bounces around and you cannot open it to rearrange the clothes because they lock the lid. The only option is to try to hold it and wait for it to finish or start over by pressing the button for at least 3 seconds. I have had a few items get shredded by it and a lot of times the clothes dont get cleaned and rinsed properly. Even on 2 rinse option. Just the fact that it has a 2 rinse option is a big red flag. It is supposed to be a energy saver and water saver but that isnt true. If you have to wash and rinse the clothes twice because it has spots from the detergent still on the sheets, something just isnt right. Whirlpool shouldnt even put a product like this on the market. I have owned many Whirlpool products before this but this is the last Whirlpool product I will ever buy. Obviously Whirlpool doesnt test its products or care about quality.

Brand new Whirlpool dishwasher letting steam out ruining cabinets. Whirlpool admitted this has happened before. ** sent 3 different service repair companies to my house and all 3 told me the parts they recommended from Whirlpool was not going to fix problem. They finally after 3 different repairmen agreed to refund dishwasher. I requested they hire someone to give estimate on my kitchen cabinets. It was their product that done damage and I live in rural area and no one wants the job of restaining. If the cabinet is replaced it is expensive. Granite counters have to be removed and placed back, sink etc. I requested 3000.00 or Whirlpool send someone to give estimate. This has been dragging on for 2 months and still cant use dishwasher. Is that too much to ask for? This has been a nightmare and Whirlpool should be embarrassed. So many emails and messages and most of the time they are unreturned