Purchased washer and dryer combo on 07-08-2013. I have a family of just 2 now. Under normal conditions I thought the machine should last 12 to 15 years. After 2 years of service the bearing and seal on the tub failed, I had to order parts and rent a tool to install. Then after 3 years had to replace suspension kit for the tub. Now after 3 1/2 years the water drain pump has failed and the sensor on the motor is acting up. This machine listed for $800. I did not purchase extended warranty but I have repaired myself. If I had not repaired myself the cost would have exceeded the cost of new. I have now purchased another makers model machine. I think Whirlpool should buy this machine back.

We bought this on sale but we're really glad we did. I was surprised how quiet it was while cleaning the dishes, insulation I guess makes it quiet. The wife also uses Cascade liquid dishwashing soap which seems to get the dishes really clean. Rinsing before we stick them in probably doesn't hurt, but overall, we are very pleased. The dishwasher has an adjustable rack which we've only used a few times and the start is easy enough for me to even figure out, sorry guys, but yes I do the dishes sometimes. Hope this helps. Good luck. Oh its model # is WDT730PAHVO.

I have to wiggle everything just to get thru a cycle on my brand new dishwasher! It fills up and works great when it does work. No prob! But it takes a good 30 minutes to get it work and I walk away come back NO WATER! Sometimes I have to unload it just to wash them myself! Now Im going back to purchase place and return or have repaired. Less than year old, repair free?

I purchased this rather expensive gas range and use the oven very little. We are empty nesters that eat out every day. Went to use oven and it had error code for cooling fan. Called repairman who replaced sensor and oven worked (literally used two times in 4 months). Now error code again. When I checked the code I realized this is a problem with these stoves. Whirlpool why no recall or free fix?

Wish we had gone online to check all the complaints otherwise we would have NEVER bought a Whirlpool model #EB9FVHLVS. Only 3 years old. First repair call to fix a manufacturers faulty grommet manifested by leaking in the bottom freezer portion. Just outside the warranty - did not purchase extended. Now I know why retailers recommend the extended. My sister overheard the repairman call in the product to his contact at Platinum Appliance Service Inc., and he made direct reference to the model number in the category of Whirlpool products known to have this specific design flaw, and that the product was never recalled but customers were directed to purchase a repair kit to fix the problem. Apparently this became a very well documented and repeated incident within the 1-2 year purchase date of these products and models with the known factory installed defect were still sent out to retailers at a reduced cost with no reference, warning or attention to the factory defect. Now 4 months after the first call we have to call in for another repair issue because our light in both compartments and the motor shuts off for hours at a time. We lost about $80 in meat products, so now were afraid to keep any costly items in the freezer because we cant afford to replace a $100 of thawed products every week on top of groceries already bought!!! It seems as though Whirlpool is gleefully generating business for appliance repair while making more than one hole in the consumers wallet.

Cabrio Washer and dryer are about 3 years old. With washer a residue is left on clothes and require an extra rinse, sometimes 2. Also, clothes become unbalanced and I have to rearrange clothes, sometimes more than once. Washer doesnt go through rinse cycle on own, I have to manually make it rinse and spin. Both washer and dryer have rust on the tops and the writing is fading.

I purchased a Whirlpool Flame Lock gas water heater with a 12 year warranty from Lowes in November 2011. It lasted almost 6 years. Called Whirlpool Support and no one in my area is a certified repair facility. Closest one is 45 miles away, and he wont drive up to check out my water heater because Im too far away. Called someone in town. He came out, looked at it for 2 minutes, and said he never saw a water heater like this, but Sears may carry parts. Charged me $50 for service call. Sears couldnt find the model number in their parts catalogs. I dont have a manometer (What is it?) so I cant do diagnostic tests on it myself. Cant find out anything about them online except complaints from other steamed customers about this crappy product. Whirlpool Support wouldnt do anything else for me except say they were sorry I got stuck with a bad product of theirs. It was made for Whirlpool by US Craftmaster Water Heaters Co.

I purchased the hot water tank from Lowes 3 years for over $500.00 within the first year, I experienced issues. I have the same pilot light problems as everybody else. I have hired a plumber four or 5 times to clean and blow everything out as instructed by Whirlpool. The hot water heater will not stay lit. The plumber has replaced every part possible two times. Customer service continues to inform me to do this and that and everything has already been done. I am without hot water again with children in the house. Once again, we are boiling hot water so that we can bathe--total inconvenience. This product is defective, and has cost me money to hire a plumber each time. I would never recommend this product to anyone!

Love the design and style. It is an above the stove built-in model. And love the combination of microwave use and to have the ability to also use convection. It certainly has been an excellent purchase and would buy it again and would strongly recommend it to anyone.

The washer itself doesnt get the clothes clean. The clothes on top never get clean, they smell. It doesnt spin out the clothes evenly even though I put them in evenly. There is oil on my floor under the washer and Rent-A-Center doesnt care and its under their Benefits plus program. They were to send off both washer and dryer last time and had no paperwork where washer was sent off at all. It has ruined a lot of my clothes with spots and I used the Tide pods. Stopped using them cause they were not working. I will never buy another Whirlpool product or appliance. Water pump went out in one year... Why would you not care about your customers... I got this set in 2013 and its the Platinum line triple top loader. You lucky to do one load at a time, a single load that is...

We bought this refrigerator (Whirlpool Model # WRF9913F1FM00) last August 2016. From day 1, the water coming out from the water dispenser was not cold at all. Same temperature as the tap water. By November, the refrigerator started to get warm. Apparently, the evaporator fan motor had to be changed according to the technician who spent more than an hour on the phone with their technical advisor to diagnose the problem with the refrigerator. After a week, the refrigerator got fixed. Not only did the refrigerator started working again, even the water from the dispenser got finally cold, too. Now four months later, March 2016, the same problem: the fridge started to not get cold again. In addition to that, the ice would not come out from the ice dispenser and water from the water dispenser is not cold again. When my husband checked inside the door, the ice were all clumped together. They looked like they melted. And even the ice in the freezer bin looked the same. And on top of this, the refrigerator was making so much noise. The technician was just here again today.

Our Whirlpool is 8 years old and - knock on wood - it has been very dependable. It has enough settings to take care of the range of our dirty clothes. It is a front loader and I like that type - it gets the clothes clean in cold water.

It seems the quality issue of the LED of the washer Whirlpool Cabrio. It was broken from the screw part of the glass and the plastic/alloy and the glass. They would charge me $416 to replace the LED but I rejected and was still required to pay $85 for labor fee. I called the company and they didnt admit that was a quality issue but I just found many consumers had the same problem. If someone would like to have a lawsuit, please contact me and I will join.

WRX986SIHV00 - French Door Fridge, cost $3k. After 16 months lights on top of fridge and freezer broke, Whirlpool only states no more warranty and offers no help. For such a pricey appliance that is a very weak quality and inadequate service IMO.

Bought a Whirlpool French door refrigerator in March 2014 and have had to have it serviced 4 times now - all for the same issue. We get frost in the refrigerator (not the freezer, the refrigerator). The same parts keep being replaced but they are all defective. This last time the service tech said he contacted Whirlpool and they had a redesigned part that should take care of it. Within 3 days of the new part being installed the frost is back. The other issue is the loud noise of the compressor. We have had multiple Whirlpool products through the years, but this is the last.

My refrigerator will be 3 years old in September. It stopped working two months after my warranty ended, in November Thanksgiving Day. I was so thankful that I had snow on my deck to keep everything cold. I had several family members in my house and watching my husband defrost a frost-free frig? This was a nightmare. Then a few weeks later, my husband company refrigerators did the same thing: freeze up and stop working. He defrosted theirs as well.I know that lots of consumers have had the same issue with any of the bottom freezer refrigerator doing the same thing. I think we, consumers, should make these company recall these lemons. Why should we have to pay more and buy more our parents had their appliances last for years. He had done this approximately 3 times since my warranty ended in September of last year. The problem is the food goes bad, the freezer ices up, causing the refrigerator to ice up and stop the air flow.I contacted the company and this is what they told me: I had to pay $295.12 to get the repair completed. It was the DEF control board. I guess others have the compressor go out and that cost over $600 to fix. Why is it our fault as a consumer buying their products promised and concern for 1 year, not 10 years. It is no wonder why America is broke? My question to the Whirlpool was, how on earth can this be the consumers fault? Here is their reply:According to the model and serial number provided, we do not indicate that there are any known recalls with this particular model. A recall requires that a product poses a threat to a persons life or health. Since this is not the case in this instance, we do not have a recall. Once a product warranty has expired, any costs for maintenance, service, or component replacements are then within the owners time frame of responsibility. Taking this into consideration, I regret to inform you that due to the age of the product, we will be unable to assist with the cost of the repair. If you have purchased an extended warranty, we would recommend contacting your extended warranty provider directly to discuss the options they provide.Oh, they sent me a postcard asking if the repair service I received was good... Yes, the company who came out did a fantastic job. I think I may have to call them back; it is acting up again. I have 90 day warranty....

This is not a new washer (Whirlpool Cabrio INTW6200VWO) and it works well BUT since we have owned it we have had rust at the bleach dispenser. I am seeing on the internet there are many complaints about this and there was a recall? But they have run out of replacement parts??? Never received any recall notice. We have online instructions on how to repair and have done this many times and the rust comes back. About a week ago we sanded, primed and enamel painted the area plus I have put NO BLEACH in the dispenser and the rust is coming back. I hate to replace a working machine but this rust can and will get on my clothing. Whirlpool was the absolutely best in the past but this one is a lemon.

We purchased Whirlpool Gold Accubake, double ovens (gas) in 2005. Since then, we have experienced identical failures (8 to date) during the self-cleaning cycle in which the high temperature burns out the thermal fuse of the ovens. This requires two Sears technicians to repair the unit (it requires two technicians to pull the oven out as the fuse location is in the back of the unit) and leaves us without use of both ovens for approximately 2 weeks (scheduling parts delivery and technicians through Sears home repair is not an expedient process).After checking other consumer product websites, it has become clear to me that there is a known design defect with these ovens in which the thermal fuse is not adequately insulated from the high temperatures during self clean; it therefore trips and burns out during the self-clean cycle. While not having access to ovens for about two weeks/year on average may sound acceptable to Sears, the reality is that the problem has escalated in frequency since purchase. In 2013, we are going on our third repair of the same problem (that makes 6 weeks of non-usable oven time in one year) and Sears will not consider replacing the unit, despite: 1) our obvious dissatisfaction with a lemon unit, 2) a well documented history of the defect with this particular Whirlpool oven and 3) an ongoing and escalating repair cost to Sears (it is under their extended warranty so the repair cost is on them although we did pay for this service up front on our appliances).I would stay away from not only Whirlpool appliances but also Sears as there doesnt seem to be any regard for the customer experience and taking care of a product problem (the right way) with a known defect. Sears has an opportunity to make this problem go away quite easily and retain a customer - fix the problem permanently or just replace the defective unit. Unfortunately, my experience to date with Sears standing behind the products they sell provides me with little confidence that either will happen.

Bought a Whirlpool Gold stainless steel refrigerator and the thermostat didnt work after a couple months of use. Lost all the product in the refrigerator and freezer and whirlpool would not compensate us. They did pay for the $29 part because it was under warranty but still think it was completely their fault for putting a defective thermostat in it. Last night the relay on the circuit breaker stopped working and I again lost all my refrigerated food overnight. This time it is not under warranty because the warranty was only good for one year. So, I just paid $314.03 to have it repaired. So angry that I spent so much money on 4 Whirlpool Gold products when I remodeled my kitchen.

We have a 2 1/2 yr. old Whirlpool gas stove. We have had the mechanic here several times as it would not ignite. We also have had the control panel repaired twice as it melted. It is melted again but they will do nothing. I tried to clean the oven with their AquaLift technology and had to re-do it four times and still have residue which appears to be permanent. We are very frustrated with it. We have used Whirlpool appliances for over 40 yrs. but will not buy another. Model#WFG710HOASO, Serial#R21712236.

I am so frustrated with my Whirlpool Gold Wall oven with Accubake system. It has been on for 12 hours in clean mode. The door is locked. My home is full of smoke and even though I turned off the breaker so no power would go to it, it is still locked and hot two hours later. This is the second time this has happened. Not only is it a fire hazard, my walls are hot to the touch. It is frustrating. There is no override of the clean mode. BTW, I was baking when the inside light switched on and off and the door locked down. I was nowhere near it and it was the second batch I was baking so I did not touch the clean button. It did it itself.

My gas range doesnt work all that well. Sometimes the flame catches and lights, sometimes it doesnt. Oven seems to be less than steady in cooking. It is ok, but I wouldnt buy again.

I filed a complaint late Oct. 4, 2011 about a problem I was having with one of my Whirlpool water heaters. Chris from Whirlpool emailed and phoned me twice within 12 hours! He was courteous and very helpful. He shipped the parts that I needed overnight. They came in this evening, I installed them and everything is working great! Thanks to Whirlpool and Chris, we now have hot water!

Despite always using the designated (he) detergents and trying many different brands in appropriate amounts, this washer always leaves an ugly white residue on clothes. This happens all the time, requiring whole loads of clothes to be rewashed, sometimes more than once. This defeats the whole purpose of conserving water, which is reflected in our water bill. We also placed the laundry room on the second floor to make it easier for me with my disabilities. I am constantly having to climb the stairs when the machine gets unbalanced in addition to the extra loads from the residue. I was very excited to purchase this machine. Unfortunately, these feelings didnt last long.

I am a mother of 4 children and 3 grandkids, I love cooking and baking. Before I can post a review on a product or appliance I like to wait and give it enough use to test it. About 2 years ago I purchase a Whirlpool range. I trust the Whirlpool brand because is durable, easy to maintain and simple to operate. After owning my first Whirlpool refrigerator for over 15 years, I am happy to post my review on my almost 3 years old Whirlpool gas stove and oven. I am a satisfied and proud customer of Whirlpool!

We bought a duet set front loader washer and dryer on 3/14/2010 and our washer already needs new bearing and costs about as much as a new washer. I think that is pretty bad when you can’t get two years out of a product and then can’t get anyone to help unless you want to pay out. I will not buy another Whirlpool product! Done!

Very unreliable oven. Oven temperature never seems to get to the proper setting. Do not buy any Whirlpool appliance. They do not stand behind their product. A stove should be relatively simple but Whirlpool managed to produce a product that is complicated & unreliable.

Whirlpool 27 cu.ft french door bottom mount WrF989SDAH White - We took delivery of this ice making fridge mid-September from Sears Canada. 3 weeks later we have ice at the ceiling/wall seam at the back inside the fridge. Water collects along the rubber seal of the freezer drawer which we have to mop up. We said we were not going to use the water/ice maker and its not even hooked up. Water comes down through the water dispenser onto the panel which we also mop up. Moisture in fridge. Temp settings are as factory specified. Whirlpool authorized tech guy gave us the inside info. Hes seen so many design problems with this model and what Whirlpool do is order the tech guys to say to customers we can order the parts and fix it. Whirlpool keep discovering and modifying the problems but you are not allowed a refund off the bat because the tech guys authorized & sent out by Whirlpool are not allowed to give a report to the retailer or say its design defective. So the customer has shelled out money and has to have band-aids left, right and center. Went to Sears to ask for a refund. They refused because tech guy wont give a report to them (but what do we really know eh? Because the tech guy stood in my kitchen and gave a verbal report to Sears but nothing written). So Im in the hole for a crap product that is only a few weeks old and Whirlpool and Sears have got us over a barrel. The tech guy said he was going to challenge their tech line now because hes upset at how many of these band-aid fridges hes seeing now. I want a different brand and model and cant have it because Sears dont have it. In dire straits now.

I owned a Whirlpool refrigerator for over 16 years and never had a problem. Purchased a new one about 21/2 years ago only because I moved and the size didn’t fit. Love my Whirlpool refrigerator. No complaints.

After purchasing three gold series kitchen appliances in 2013 two months after purchase refrigerator failed. Whirlpool did not have a fix at the time. Told me I had to wait two months for a part to be engineered and then service to be scheduled which is not acceptable. They would not take back the refrigerator and give me a different model so I had to press Lowes to accept it back and they did give me a refund. I then had to purchase a different brand refrigerator which now I dont have a matching set in my kitchen.Then the dishwasher became part of class action lawsuit and now my gold series gas range is obviously damaged too. The control had the plastic panel is bubbling and it is split. Again after talking with Whirlpool customer service they refused to help with this at all claiming this is a cosmetic issue and it wouldve only been covered for 30 days from date of purchase. This gas range also has an aqua lift self-cleaning feature which does absolutely nothing. It does not clean the stove. You have to go into it and clean it the old-fashioned way with chemicals, gloves, mask and a scrub brush. These products are absolute junk and the customer support is non-existent. Do not buy Whirlpool products.

The Whirlpool Cabrio washing machine it’s the best washing machine I’ve owned. Water temperatures are right on, has an express wash 38 mins for lightly soiled clothes, plus the normal, delicate, heavy, bulky, 2nd rinse, if you need it. My wife loves it because it’s very Gentle on her personal items. Energy saver AND BEST OF ALL, IT REALLY CLEANS THE CLOTHES.

I bought my Whirlpool Duet set with pedestal in February 2008. I just had a tech here to figure out why my machine is so loud during agitation and that I cant hear anything else. He said its the drum hitting something. I never overload my machine - just normal use for 4 years. It costs more to repair the machine than to buy a new one. Now, after seeing this information, Im not the only one who has this problem with my Whirlpool washer. I am disappointed that there isnt anything else the Whirlpool company tech can do for me - just a receipt that shows the parts alone cost $600.00. Now, I have to pay about $50.00 just to get rid of what from the outside looks like a perfectly good machine.

I was pleased with the look and performance on my dishwasher. It did sometimes leave some food particles, but, overall it did a good job. I really dont remember the model since it has been a few years since I had it.

Purchased a Whirlpool Dishwasher in 2017 as part of a kitchen remodel. I have always had General Electric appliances, and shouldve never changed my brand. I had to have this dishwasher fixed a month after purchase (this shouldve been a clue that this was a lemon). Fast forward to two years, I know have to turn the power off to the dishwasher after 3 uses otherwise it stops running mid cycle and the re-set lights blinks. Ive had a repair person take the thing apart to try and find the problem (at the cost of $250) with no luck. The repair person contacted Whirlpool to see if they could help troubleshoot, the response he received was because it was no longer under warranty they wouldnt even answer his questions, hows that for customer service????

I purchased a new Whirlpool (2015) Model: WRF736SDAM13 French Door Refrigerator. Two days later, water was dripping from the light in the top of the refrigerator. I was removing about a cup of water twice a day, which dripped from the light. The company was friendly when I called, and offered a replacement or repair. I elected the repair as I felt that would be acceptable. The repair man inspected the refrigerator and determined the problem to be condensation from the water holding tank, located in the top of the refrigerator. He stated that because the incoming water has the opportunity to reach room temperature prior to entering the fridge, and because of the high temperatures (80’s & 90’s) the water holding tank has condensation that collects in the top of the refrigerator, which drips onto the top of inter refrigerator liner, and eventually drips through the light. He stated there is no fix, as it is not broken. While it is not broken, this is a bad design error, which would affect anyone who lives in an area where the temperatures exceed 80 degrees outside, which could only be fixed with a collection tray that would allow the water not to drip into the refrigerator. Currently there is none available. Because I only had the refrigerator for two days before the problem was reported, Lowes allowed me to make an immediate exchange. However, had this been purchased during cooler temperatures, the issue would not have been noticed until after the 30-day time frame and the exchange would not have been an option. When I made the exchange, I noticed that all the 3 & 4 door refrigerators are made the same and will have the same problem. I ended up exchanging it for a Samsung model. Kudos to Lowes. Whirlpool, you need to find a fix for this problem if you want to sell me another one.

This washer was purchased on 12/21/2007. It was in a vacation home that was rarely occupied, therefore washer not used much. On 7/23/2008 the cycle switch was replaced. On 7/20/09 the same problem occurred. The washer may have been used 5 times during the year. The handle and rim also needed to be replaced. On 8/31/09 the switch and handle were replaced again. On 2/5/13 the door latch was BROKEN AGAIN. Now on 7/10/15 the door latch, start switch and cycle switch are broken again... DO not buy WHIRLPOOL products.

We bought a fridge in November 2013. Brand new, paid about $2400. After a few months, the fridge wasnt keeping our food cold, was leaking from the ice maker, and wasnt making ice. I called for a repair and about a week later they sent someone out. He assessed it, then came back a week after that to replace the part. Within a month or two later, the same problem. I called for service and was set up with a new company. The repairman called me a couple days later and instead of setting up a time to come in, he says its a common problem, he knows whats wrong, and he will order the part and call me next week to come replace it. A week passed, no word. I tried calling the man back, left several voicemails, and no answer. After another week, I call whirlpool again and tell them I heard nothing from the man and at first they tell me they cant do anything with it since it is an open ticket and I tell them thats not okay. They need to close it, he never even came to the house and assign it to someone else. After they tried multiple times to call the repair company themselves with no answer, they assigned it to a new repair company. Again, it was assessed, a part was ordered and replaced another week later. So now its been well into 9 months of having a worthless fridge. A few weeks after that part was replaced, the problem was back and I called again for repair. I was told if this problem is not solved this time I would be eligible for a replacement fridge. Obviously, it did not work so I called to have a replacement fridge at the end of August. I was told that someone would call me to set it up in 5-7 business days but maybe a little longer since Labor day was right around the corner. I waited, patiently. I called every few days for weeks until mid October and kept getting told it had not been assigned, they are really backed up, it will be just a little bit longer and they will send a message. Mid October, my sister in law called for me and she was told that it was denied because I had not had it serviced within the last 4 weeks. WHAT KIND OF ANSWER IS THAT??? Thats like putting salt on a wound!! I have had spoiled food, constant clean up of leaks, and constant wasted calls to get told that it was denied because it wasnt serviced in the last 30 days while I was waiting for a response from Whirlpool??? So of course I grab the phone and go off. They agree to reopen the case because it was denied for a bad reason. At this point, as I type this, I have been on hold for 55 minutes to speak to yet another supervisor because it has been 2 and a half weeks since they reopened my case and I am told it has not been assigned and the best they can do is send another message.

Steam cleaning DOES NOT work! I have complained to Home Depot and Whirlpool since my purchase 9/2018. They sent 2 different repair men and both times I was told there was nothing they can do. I got one phone call from Whirlpool (Maytag) and they sent me a cleaner (wish is just for the stovetop). No other return emails or calls have been acknowledged. My stove looks like it hasnt been cleaned EVER! I was also told to use elbow grease. I am so disgusted and at my wits end. Any suggestions, besides court?

My 5-year-old Cabrio started coming up with error codes, and not draining and spinning the clothes. I called a week ago, they offered me 2 options, one being put $339 on a credit card and that would cover all parts, labor, and a 1 year extended warranty. They charged the credit card immediately for the biggest piece of crap washing machine. Someone came out 2 days later and told me he has worked on a lot of Cabrios but never one in quite that condition. I was led to believe that after charging the credit card, boxes would be arriving with parts to fix it. I called 2 days later to find out the status of when it would be repaired and they told me they already put a credit thru on the credit card because to fix it would be equal to the price of 2 brand new washing machines, and they will do nothing to honor that agreement. So I now have a piece of ** in my laundry room and takes me two days to do a load of laundry. DO NOT BUY THE CABRIO! In fact Im not going with a Whirlpool ever again!

Model WRS586FIEMO1, Serial # HR50801958. In December ice maker stopped dispensing due to cubes melting and clogging around the auger. After 3 service calls a new door was ordered with a delivery time of 4 o 6 weeks. Have spoken to and e-mailed several customer service people and am told it will be another 4 to 6 weeks. This has happened at least 3 times. In the meantime I must empty and clean the ice bin and surroundings every night or it freezes up and cannot be removed at all. Finally told them I no longer want a new door, I want a different model fridge. Was told they do not replace, only repair. It is now April and they have done neither. They did extend my warranty until December but at this rate that too will run out. Would never buy another Whirlpool appliance or any of the other brands that manufacture.

I purchased Whirlpool Duet HT front-load washing machine with model #GHW9400PLO. After a year of owning the product, failure codes continued to appear. I have followed the direction under the troubleshooting page which said to cancel and unplug the unit. After doing this over and over, I finally took the top lid off to inspect the problem. A ribbon cable was torn due to the top lid rubbing against the lid and the drum. I called Whirlpool and this was not covered (go figure). I then asked for the ribbon cable and they said they cannot just supply the ribbon cable and that I would have to buy the user interface which is $191 plus a $35 core fee because they re-bill them. What a rip off. A ribbon cable from a computer store would only cost $10.00. After that repair the Micro Machine control went out which is code F11. Code F11 is all over the web because this is a defective part that Whirlpool should do a recall on but why do that when they can charge $310 plus, get this another $35 core charge because they re-bill them? If you are not mechanically inclined with these parts plus labor you could have bought 2 washing machines. But who in the world would buy 2 pieces of junk right?Bottom line is: do your research and buy from a company that will stand behind their product because Whirlpool will not! They know by the number of parts they ship out that that part should be recalled.

My washing machine would not spin dry. I had a new pressure switch replaced to a tune of $180.00 which was only 26 months old. I have always bought Whirlpool but this will be my last whirlpool appliance.

We purchased the gold series model WDT790SAYM1 in 2013 replacing a 12 year old Maytag we were very happy with. The Whirlpool just does not clean very well and leaves dishes dirty no matter which cycle you use. The spray arms are cheaply made and do not work well. Its a piece of crap compared to the old Maytag. Do not buy any dishwashers from Whirlpool, they are simply inferior products and a waste of money.

My washer worked less than a year. I finally called Whirlpool and they basically said, were a big company and you must for the rusty, broken drive shaft, pay for all new computer face plate, and service repair. I contacted the FTC and they told me they needed more complaints in order to make them do a recall on Cabrios. Good luck!

If you are in the market for a new refrigerator, STAY AWAY from Whirlpool Top Freezer models. Mine just failed after only 5 years and Whirlpool will NOT do a thing about it, except ask, Did you buy the extended warranty? The compressor in my refrig was made in Mexico by a company called Embraco. I used to work for Whirlpool and these compressors were garbage then, and I guess still are, in my opinion.The 5 year sealed system warranty was removed from these refrig years ago and I can only assume this is why. If you want the 5 year SS warranty, buy a side by side or French door model. Just be sure it doesnt have an Embraco compressor on it! And while I am not a believer in them, planned obsolescence dictates you probably should buy the extended warranty/service plan for such a purchase. Dont rely on positive past experience, even for a company like Whirlpool. Their gold ring of promise emblem is very tarnished for me now.

I purchased a replacement gas range (whirlpool) approximately 3 years ago. Its not the top of the line, no bells or whistles such as a self-cleaning oven or such. I did love the three huge grates on top, one which is interchangeable with a flat grill. If it only worked it would be a decent range. The center oblong burner struggled to ignite in full from the beginning. Often, I light the thing with a grill lighter. But the thing that pisses me off more than anything is the F2 error that appears 70% of the time on the control panel when I am preheating the freaking oven. I am NOT replacing the control panel on a $400.00 range. What I have discovered is I can hit off my power at the main, not once, but 2-3xs and reset or over ride the damn thing. I read this F2 code is a common occurrence so I got to thinking, why? My conclusion is the heat from the oven is vented up & directly on the control board panel. Really now, whos bright idea was it to expose a control board to repeated temps of 350+? Hate this appliance. Next range will NOT be a new one, Im looking to replace this junk with something mom or grandma had that lasted decades, not a couple years. Shame on you Whirlpool for producing such low quality, disposable products. By the way, I just went through this with a new fridge so theres much to be desired with new appliances. Theyre junk, designed to fail.

A-10 error on display ultimately means needs a new pump. The washer (model WFC7500VW 2) is 3 months, 9 days old and is now unusable. I cannot get any service (under 1-year manufacturers warranty) because the sticker inside the door with the model and serial # is missing (i.e., it was sold to me by Homedepot.com without a serial # on the door label, sticker is intact and is brand new and apparently was printed without a serial #).I made multiple calls to Whirlpool in Benton Harbor, Michigan and finally spoke with Courtney (who states she was a supervisor) pretty much said all they will do is to reprint a label from the factory and I should have it in 7-10 business days. They refuse to stand behind their product and authorize timely repair of their product they sold to my without a serial # on the door tag from the factory. I have to wait to schedule factory warranty repair until I get the new label (probably 3 weeks plus without a usable washer). Courtney refused to contact me via email for any of her contact information or to supply verification of conversation or promise of a new factory label. Also, she refused to try to authorize any type of manufacturers warranty to fix the brand new unusable washer!

I bought a Whirlpool Cabrio washer and dryer on March 2010 from Leons under the dont pay for 18 months. It took 2 months for me to receive it. I thought it was a great washing machine. I made my last payment on July 2011.On the first week of August, the machine stopped working. The F 51 code appeared. I then looked up the code. I also looked up complaints. I called Whirlpool customer service and was told it would be $81.00 per hour for service plus parts. I asked why there are so many complaints about this machine, and after spending a good amount of money on what I believed was a good make of washing machine, I could not believe that they would expect a customer to then turn around and fork out that kind of money for repair.I was told that the one year warranty has expired, so it is my responsibility to pay. I am a widow with 2 children, working 7 days a week to pay my regular bills and now they expect me to pay for repairs on a washing machine that is only 15 months old. Thanks Whirlpool. I will be sure to tell everyone not to purchase Whirlpool products and thanks to my neighbors for letting me use their washing machine because I cant afford to fix mine.

16 months after purchase, the machine starts displaying F71 codes, 6 weeks later F70. After calling Whirlpool customer service number on the User Manual, we were told that the washer was out of warranty and there was nothing that Whirlpool was going to do for us. I have a reasonable expectation that a brand new $800 washing machine will operate for many, many, trouble free years, but finding an electronic failure that has been estimated at $400 to repair, 16 months after purchase, is simply and obviously unacceptable. This is clearly a defect in design and/or manufacturing.

Purchased a Whirlpool Electric Range August 2015. Purchased it because it looked pretty and the Aqua Lift Cleaning feature sounded too good to be true. As it turned out it WAS too good to be true! I have just read a # of reviews about this range and I agree with all complaints. Does anyone like this range? The AquaLift cleaning technology is a joke! The baking temperature fluctuates & I could not figure out how to improve on that (for the longest time I thought it was just me not being able to figure out my new oven). The most serious concern however, happened a couple of weeks ago when I turned on the oven & immediately the oven started to smoke and an electrical smell permeated throughout the house. Had I started the oven and immediately left the house our house would no doubt have been destroyed by an explosion/fire.Phoned Whirlpool & because the problem was so serious they had a serviceman at our door within 2 days (yes I am being sarcastic, it did take 2 days). At no time did the call centre express any concern nor did they advise me to unplug the range and to make sure I did not use it. Obviously, I would not use it but shouldnt that be something they advise as part of the checklist talking points.Serviceman arrives 2 days later & advises us that the parts alone would cost $650.00 & oh yes the labour costs to install the parts would be charged by the minute. I didnt even ask him how much per minute because only an idiot would repair this piece of junk!! The power cord to the range had basically melted right through; you could scrape the char right off the cord. The computer part of the range was shot and had a strong electrical smell to it. The serviceman basically said that I shouldnt shoot the messenger and charged us 93.45 to tell us that it was going to be a very costly repair.I disliked this range almost immediately and was looking forward to the day when I would have an excuse to purchase another electrical range. I did not think I would be shopping for another range within 1 1/2 years from the time I purchased this piece of crap!!! Nor did I think that there would be a possibility that this appliance could potentially be hazardous to my family and home. How long is Whirlpool going to ignore all these customer complaints? This range should be recalled! It not only is selling features such as the Aqua Lift technology that do not work properly, it is selling a potential fire hazard.I will never again purchase any appliance that is made by Whirlpool. Whirlpool makes a lot of appliances and uses names such as Maytag, Amana. KitchenAid, etc. I have purchased another range and this one is made by Frigidaire (no connection whatsoever to Whirlpool). I dont know what my experience will be with my new Frigidaire Range but so far I am loving it! Hopefully, my new appliance will not nearly burn my house down. Whirlpool: Step up to the plate & take responsibility for the defective electrical range you are selling before there is serious harm to persons or property! THIS ELECTRIC RANGE NEEDS TO BE RECALLED - MODEL # YWFE715HDEHD.

whirlpool Cabrio Washer - I replaced my front loading Duet with this, thinking I was done with front loader. Designs are set to fail, liked the idea of no agitator, thinking can clean a lot clothes at once, boy was I wrong, heavy loads wont spin dry, forget sheets or blankets. The machine just stops, leaving everything soaked and you basically screwed, you can invoke a spin cycle but to help make rinse and spin out, sooo disappointed. Whats wrong with the designers of this product? They didnt try sheets to see if it would even work. I am far from over loading this too. Dont buy this.

Ice maker has stopped making ice on several occasions. Also when you try to get ice out of the door dispenser, it will continues to release ice but will not go down the chute and when you open refrigerator door it spills out all over the place. Getting ice other than from the door is no easy task. I have taken to putting a bowl under the ice dispenser. Interior of refrigerator is not user friendly for positioning items. Bought in a hurry back in 2017 and have regretted it ever since.

I purchased a Whirlpool water heater about 9 months ago. The thermocouple went out and was replaced, but about three to four months went out again. Very disgusting.

We have been married 36 years. Since year one, me and my wife have owned nothing but Whirlpool appliances. They lasted forever. Approximately 4 years ago, we redid our home, and bought all new appliances, stove, refrigerator, dishwasher, microwave, front loader, washer, and dryer, Since then, 4 years ago, our refrigerator ice maker stopped working. 2 years ago, our dishwasher wont heat up, so it is useless to us, and the bearings in the washer are shot. I must say we are so disappointed in Whirlpool. We are barely living on my husbands income as I had to stop working 3 years ago, as I became disabled, but did not make enough money to be able to collect disability. We cannot afford new appliances, nor to fix them. I am sending you the model numbers of each appliance, hoping you will do something to help. This is just ridiculous. It is just my husband and me in the house (washer: WFW9200SQ02; refrigerator: GD5NVAXSA01; dishwasher: no model number, but it is Energy Star II 8575637). Please help. We cannot afford to replace this, nor repair. It is hard for me to go to the laundromat, then come home to dry. Standing long periods to to dishes, takes a toll on me. Please help.

I purchased a Whirlpool duet, model #wfw9550ww00, two years ago with added warranty. The machine stops mid-cycle. The time remaining flashes but no error code. Pressing start would begin the machine again. Sometimes, we could go several loads with no problems and other times it will stop three or four times in one load. Occasionally, pressing start would not work and the machine would require unplugging and restarting. We have had several service calls in. They have said it was the pump, then it was the motor, then it was the pressure switch, and yet the problem persists. They are due to come out again tomorrow for yet another examination to determine its cause. Its the third time in one month. Its a lemon.

I have both Whirlpool washer and dryer. These are my second set. Whirlpool is reliable & long running. I love this brand! My dryer is six years old and the washing machine is nine years old. Never a problem and they do about six loads a week.

Even the repairman said Whirlpool isnt making them like they used to even though they are charging more for newer appliances. The freezer has clogged, ice maker already broken, have to replace $400.00 for just the icemaker. As a real estate agent, I will make sure and let our new home buyers never to purchase Whirlpool again!

I have always had a whirlpool dishwasher and have always been please until my last dishwasher. The part that holds the soap and liquid stuff has broken and also the part that holds the silverware. Been really disappointed in this product.

I recently purchased a Whirlpool Gold Edition double range. After a couple of uses, the top oven thermostat went on the blink. I sat the thermostat to preheat. After 20 mins. and a call to the warranty department, the oven never reached the desired temperature. The warranty department sent a repair person who could find nothing wrong with the stove. I called Lowes and told them I couldnt trust the oven not to do it again (after several times of it happening and resetting the circuit breaker). This would be a disaster if it happened during the holidays when I cook for 20 or more people. Lowes manager said they wanted me to feel comfortable so they replaced the entire range. GUESS WHAT... 2 weeks after having the new one... same problem. I set the thermostat to 400 degrees and when it got to 390, I saw the light blinking. Waiting 10 more mins, nothing changed. I hit the cancel button, reset the bake... the thermostat, when I turned it back on, showed 365... What the heck! I didnt open the oven door. Whirlpool ranges are a piece of crap. I am calling Lowes again tomorrow to return and advise them to stop selling the junk. Dont blame Lowes... They do the best they can with the crap they sell.

I wish I could give negative stars! My Cabrio Model #WTW6600SG2 sounds like a jet airplane on the spin cycle (this started 2 months ago). Now, Im getting the UL error, its not an an uneven load!

Bought this washer 5 days ago!!!! Broke after 4 loads of laundry. Store manager says they will deliver new washer. ERROR CODE LD LONG DRAIN and heavy duty humming sound. Unplugged washer to prevent further damage to washer and reduce risk of electrical fire in home. Consumer affairs wants me to rate my experience - rate my experience on what? Ill give 4 stars dissatisfied here, but field wont let me go more than 2 stars. If its this website they want me to rate I give 2 stars dissatisfied, as for the washer, dole out 7 Benjamins for a product that dont work and you tell me!

We purchased an over-the-range microwave in 2005 Model No. MH1141XMQ-1 Serial No. TRS1112979. It has worked fine however, within a year, the grill cracked. It was not covered so we paid for a new one. A few months ago, I noticed a crack near the top of the door by the handle and then a couple of weeks ago, a huge chunk broke off the bottom of the door.

I love my washer and dryer. The only problem I had over the past five years since I bought them was when the motherboard went out on the dryer. Luckily I had insurance, so was able to have it replaced. The features on the machines and their ability to clean really well have made my life much easier when it comes to doing laundry!

I purchased a new Whirlpool Cabrio washing machine from DeWaard & Bode at Bellingham, WA in January of 2007. The serial number is **** and the model number is ****. Several months ago, the dreaded F1 code appeared. The code initiates when the washing machine is started and must be cancelled and started 3 times to continue washing. Later, with approximately 19 minutes left in the cycle, the code reappears and requires canceling and restarting another 3 times, at times 4. I have no extended warranty so I have no coverage for repairs. I also dont want to pay for a service call for what is most likely the computer module as evidenced from the majority of complaints online. This washing machine still looks new and works other than the inconvenience of having to stand by when starting the cycle to reset the code and then having to run upstairs later to reset the machine when its partially through the cycle. At some point, it will likely quit operating all together. I have purchased several appliances over the years from DeWaard & Bode and will be replacing all kitchen appliances again next year due to a planned remodeling but at this time, I do not intend to get them locally due to this issue. I have reviewed several comments online and feel that Whirlpool has a real problem with this particular machine that they refuse to be responsible of. I was offered an extended service plan for 1 year at $132.01 or 3 years for $336.61 but Id have to wait to be allowed to utilize it due to existing circumstances. Im not sure if a fix is actually available. The local dealer did not offer any assistance.

Purchased a Whirlpool WTW7800XW a year and a half ago. The left top of the washers glass pops up, making it impossible to use the washer unless I weigh it down. Apparently a screw has popped out to hold the glass in place. Whirlpool used to make a decent product, but thought I should pay them $129 for their time, just to come out and then an additional part fee. How about the 30 minutes I spent on the phone with no satisfaction. My time is also valuable. I gave them the choice to come out and replace the screw (which shouldnt have fallen out in the first place) or lose a customer. Fortunately, I have a husband that can repair it, but I am extremely disappointed that Whirlpool is now making substandard products. We are a family of 3, so its not like Im doing laundry daily. Am I wrong to think I can get at least 3 years out of a product?

Bought the washer from HH Gregg for over $560 12/2012. Turned on power 4/2014 and just heard clicking noises then nothing. Had to get technician. Paid for $75 service charge and waiting for cost of labor and part for the lid lock/latch assembly. I see a lot of complaints with this new machine. I bought a new one BECAUSE I did not want any problems with repairs. Whirlpool is ripping off the consumer passing out this piece of discombobulated metal, wires and electronics. An appliance like this should last AT LEAST 7 years without a problem. I wish there was a class action lawsuit and will be waiting to the day it surely comes.

I wish I had purchased this a week before I decided to become an owner of a portable AC unit. This unit cools my 390sq ft living room with ease, paired with a large 3 speed stand-alone fan, the adjacent rooms feel the coolness as well. I plan on purchasing another uni, with a lower SQ rating as to have for the master bedroom. Easy to install, move and drain when the time calls for it. Not too loud, not too big, not ugly and I would purchase this unit again.

Within a few months after I purchased my gas hotwater heater, I started having problems with it not wanting to stay lit. It was purchased in 2004. I see that this is an ongoing thing with Whirlpool. Every time I would call them, they would give me stupid answers on what it could be. One lady got hateful with me. I have replaced every part several times and Im having problems. About every two to three months, Im replacing thermal couple. As of right now, Ive been without hot water for eight days. I called and he told me about a trip button that is in the little white thing that has wires going to the thermal couple. I push in on it and then tried to start my heater and it worked. They have never offered to replace it or even give me a discount on a new one. No one should be having so much trouble out of your hotwater tank. This is not normal. These are defective and should be recalled. This company is ripping the consumers off and we need to stick together on this and do something about it. Im afraid to buy another heater because I can see that the new ones are still junk. What do you do?

The cabrio washer that we purchased in 2010 did a good job of cleaning the clothes but the case started rusting within 6 months. After service calls and e-mails and phone calls, there have been no helpful suggestions beyond buy a complete new case. I hesitate to do that because I am convinced there is a design flaw in the area where the soap dispenser is located which allows the soap to flow between the case and the drum and it eats away theinside of the case through the inadequate paint covering on the outside of the case. It is a mess. Now the instruction panel is bubbling and lifting. I carefully care for my equipment and have kept two washers over 15 years and they still were in good shape with cases still looking new. This is not something I am doing wrong. It is a piece of junk with a terrible paint job and it cost more than any washer I have ever had. I wish I had some recourse. I am on a fixed income and had hoped this would be the last washer I would have to buy. I have photos.

This machine was my dream machine for about two years. Then the noise started during the spin cycle. It gradually got louder and louder, until it got so loud that it sounded like a jet engine taking off. You could not be near the wash room and hear each other talk. Then it began to aggravate me with the UL flashing. I know how to load a washing machine. It was just a defect. Then it started making a grinding sound to add to the roaring spin noise. We were told that it would take over $500.00 to fix, so we just sat back and waited for it to die. Well, the other day it began to leak some water out of the bottom of the machine. Now today we are paying our last respects to a piece of junk that Whirlpool calls a washing machine! It is less than 5 years old. This was a $900.00 washer. There should be a recall. We should ban together and demand a recall! Now I will be forced to go buy a new washer. I can tell you which name brand I will not buy, Whirlpool!

Whirlpool Cabrio washer - Its been a month now and still the washer is not fixed. The repairman through Lowes warranty service is the worst by far I have ever dealt with. I had new transmission put on, still wont agitate and smells hot. The washer is only 18 months old, well taken care of. This expensive hunk of junk is worthless and the aggravation for all this mess is worse. I called Whirlpool 2 times. The first time, I got a call with the standard oh so sorry bit. Oh boy, that gets the washer fixed. Not. I blasted them and Lowes again. I have had it with this mess. The repairman is supposed to contact Lowes a week ago for replacement. He has done zero. I called Lowes to check. How can they sell this junk to customers who pay for this washer? They know it is junk, Lowes and Whirlpool, so do the right thing and recall the junker for refunds to consumers.

We bought a new refrigerator when we bought our house in Dec. 2008. On the third of July 2015 my Whirlpool Gold stopped being cold. In fact it was a bit warm. Had a repairman out here today. Warranty expired and the compressor has failed. Wow! Im not happy.

I have had my Whirlpool stove for over 30 years and use it daily. Still a great stove. I would not trade this stove or any of the new types. I just need to get the self cleaner repaired. The only problem I have is finding parts to fit this older stove.

I bought the new Whirlpool aqua clean last year - they guaranteed me at the store it would clean as I explained having a clean oven at all times was extremely important to me. They assured me I would be pleased with the results. I have never disliked an oven as much as I do this one. The tech came to the house and checked the temperature of the oven as I also complained it was baking uneven (the back was overcooked while the front was underbaked) but the temperature was right on so nothing can be done. As far as the cleaning goes all I can get is a new bottom pan for the oven as I have four years of insurance. Not happy as I would like to have a different stove. I WOULD NEVER RECOMMEND THIS OVEN TO ANYONE.

We purchased this washer in 2017, its the top loading Cabrio washer and it has been nothing but junk since day one. Purchased from RC Wiley in Boise and unfortunately did not buy the extended warranty because we trusted that this American company would make a washer that would last longer than 3 yrs. This washer barely washes clothes, leaves a residue on them since there is no agitator, also constantly gets unbalanced or gives and error of LF which means water supply issue when there isnt one. My 15 yr old about has a heart attack when he uses the quick setting and his clothes arent done in an hour and a half. Ive even resorted to turning the thing on to just rinse and spin so things get done sooner, still the stupid washer just sits. I would sell it but I dont want to pass on the pain, so its going to the dump to or to Goodwill cause its not worth the headache. Too bad you cant trust an American company to make a good product. Sad I really wanted to like this washer.

We purchased this washer (Whirlpool Cabrio) about two months ago and we have been extremely dissatisfied with its performance. Quite simply, it does not get clothes or anything else clean! I have tried every possible setting and still the dirt remains on anything that is even slightly soiled. So, I cant believe that things that dont look dirty are getting cleaned either. They probably arent even getting rinsed, even with the extra rinse option. It seems almost nobody likes this machine, so why is Whirlpool risking their formerly sterling company reputation by keeping it on the market? I would be happy if I could return it to the store for a refund, but that is not a possibility as far as I can tell. If you are considering buying this machine - dont!

I purchased this Whirlpool dishwasher from Sears on 3/25/2010. Then on 8/11/2012 the dishwasher completely failed to operate. I called for service and they checked it out and they found out that the control board had failed due to moisture getting into the electronic components. They replaced the control board & control panel and the dishwasher has worked until today (2/08/2014) - 17 months, and now exhibits the same problem. The original repair costs including labor was over $400. Not really acceptable and demonstrates very poor quality control and design @ Whirlpool. As of now, I am considering whether to purchase a new machine (obviously neither a Whirlpool or Sears product). As part of the original service the soap dispenser also failed and had to be replaced. I believe Whirlpool should be responsible for some of the repair costs.

The salesperson was great but we are not happy with our washer. We already had it swapped out once because of white spots showing up on our clothes. The only thing they could think of was that the bleach I used wasnt rinsing out completely so it showed up on our clothes. Recently, I washed a table runner by itself and it had some red in it. Now there are red spots on a couple of items that I washed after the runner. My husband just now asked why there were red spots on a shirt that he wears all the time. I explained. Also, we have had some white spots on clothes and I could scratch it out without leaving a permanent mark. Were no longer using bleach and we use only liquid detergent and all of it is HE. So I dont understand the machine. I hate it.

Our whirlpool gas range has a defect - the material around the control panel is peeling and flaking; it is not possible to clean it and it is likely going to get into our food. It has not been cleaned with anything harsh - I use warm soapy water or stainless steel cleaner. I use the same thing on my other appliances and they look fine. I am waiting for a tech to come and look at it but after reading other complaints I fear that they are going to say it is cosmetic and it is not covered. Sadly, we can no longer wipe the control panel if it is dirty because the stainless steel is flaking off and it gets all over the burners and I am concerned it will get into our food. I am willing to bet the paint that is flaking off is not approved for consumption.I wish I had our old Frigidaire Gallery Series range back. I regret replacing it. Whirlpool was not helpful. They told me to contact the place I purchased it. The place I purchased it said it is a manufacturers defect. Someone suggested painting it with stainless steel colored spray paint which sounds like it is going to look awful. The new panel is $148 but it will need to be installed and if there is a defect how often will I have to replace it? I am very disappointed.

I love Whirpool products. They work well, even under hard water conditions. Ive had my Whirlpool washer/dryer for 12 years now without one single problem. Even with the hard water problem in my house, the clothes still come out clean, the dryer works well, I do clean my vent each and every time after each dry. I also have to clean the area where I put my detergent in due to the hard water and the machines are still working great.

I have always like the Whirlpool brand in general. It is a well known company and the products have always been of quality. I will say that recently I discovered that Whirlpool will only allow their own technicians to work on more current washers and driers and that is concerning since I have always used a technician I know and trust.

Bought this washer two years ago. First experience was when a load of towels became wrapped around the agitator. Called in service tech who told me to load the bin with the cloths pressed against the bin wall away from agitator, as if the cloths/towels would stay away from agitator. Two years later, Im ready to the machine to the street. Forget sheets and bedding. The agitator wraps them so tight that I almost rip the cloths/sheets to unravel. I had to wash a pair of work pants that were soiled with mud three times and there was still a stain. I will NEVER EVER buy another Whirlpool product.

The microwave keypad is worn down after 10 uses making it difficult to read the pad. I just discovered the microwave was missing the front leg and they do not have a replacement part so I am stuck with a virtually new microwave that will not balance. It took 4 phone calls to their customer service department to try and sort out the problem. Poor product and extremely weak customer service department.

Whirlpool Duet Washer Trouble. Im having the same issue as Tom in Oakville. The F35-Sud errors pointed to the pressure sensor - NOT. 2 parts, a technician visit, and $800 later, Im still waiting on a Main Board replacement that is on nationwide back order. Time frame unknown.

We have a Whirlpool with freezer on top, nothing fancy in the apartment we rent. Twice the lines have clogged up with ice, causing the water to pool in the bottom of the fridge and then leak onto the floor. The maintenance man said this was a common problem in the complex with the refrigerators. Tonight, I heard noise coming out of the fridge. It was so loud it scared the cat. I went to check on it and a juice bottle had exploded in the fridge. It cannot keep an appropriate temperature. Things up front are barely cool and things at the back freeze. We are moving and unfortunately, the house we are buying has Whirlpool as well. When it comes time to replacing the refrigerator, it will not be a Whirlpool!

Im guessing the company that makes Whirlpool appliances no longer make dependable appliances… bought home 2 yrs. ago. Bought Whirlpool over stove microwave and expensive side by side fridge. After 1 yr. microwave stopped heating. Now my fridge is no longer cooling. Have cleaned it underneath, did all a normal person would do. I replaced my microwave last year with a Maytag. I’m sure I will have to replace the fridge very soon. My stove is a Maytag. Dishwasher a Frigidaire... have had no problem. Just the Whirlpools… Will never buy another Whirlpool. Not just me, my niece bought a microwave. Her stopped heating after one year.

I purchased a Whirlpool Duet washer in Jan. 2011 and there has been 3 problems. There has been water leaking, loud/banging noises during the spin cycle, and torn clothing. Technicians have visited 4 times in 7 months. At this point, I forsee more problems in the future. I spoke to a supervisor at Whirlpool and I asked if the washer could be exchanged. I was told, If it is repairable then we will continue to repair it. I was also told that I could purchase an additional 1 or 2 year warranty. A comment like that makes me believe that the company foresees problems in the future as well. A company like Whirlpool should realize that customers should not have to spend time leaving work early or taking off to meet with a technician about an appliance so often or at all! I have owned a washer in the past but it was left when we sold the home and I never experienced any problems!

I bought a Whirlpool Cabrio 1.5 years ago and it has already died. Repairman need to replace the control board which had gone out. $450.00 to replace that piece, but could not guarantee that it would be the only problem. The motor or some other issue may have caused the board. This machine was purchased at Home Depot on sale and at $450.00 to repair would be approximately 70% of the original price. It will be cheaper to buy a new one rather than fix this one. We were not happy with this machine in the first place. It leaves the clothes stained with a white powder that never rinses off. The cycle time is very long, up to an hour to wash a load. The clothes are still very wet once the cycle is finished, which of course increases the drying time. I cannot recommend Whirlpool top loaders after my experience with this machine.

My new refrigerator was purchased in December 2016. The black finish was scratched by the installers wiping off their hand prints. The retailer offered to replace the doors which happened two months later. The black finish scratched IMMEDIATELY while cleaning of the installers fingerprints, using a silk microfiber towel though it looks like the cleaning was done with steel wool pads. I called Whirlpool and the retailer. Whirlpool says to order more replacement doors. Ha! Ha! I have had black appliances since 2000 in another home and there was NEVER a problem cleaning them. I do not recommend WHIRLPOOL because of this problem with the stability of the black finish. I dont have a receipt or order number because the suite of appliances was purchased by the condo association, not me personally. But I can attest to the condition of the marred finish and the ludicrous solution provided by WHIRLPOOL customer service... order more doors. I guess youd have to do that every week after you clean the front of the refrigerator.

I bought a Whirlpool fridge 4/23/2013. Thanksgiving it went out. I had a repair company come look at it to see how much it would be to repair. He said the compressor was out, it has a freon leak, and the electric board has a relay that is acting up. Basically it would cost $600 or more to fix. I only paid $750, mind you. Whirlpool customer service said if we pay to have it fixed then send them the paid receipt. They would then give me a 6 month service plan for future repairs if needed. Please tell me how that helps me now? A voucher for $200 or offer something to help me now. Not a happy customer. Thanks for nothing Whirlpool.

Five years ago I bought a brand spanking new HE set with a top load washer, top of the line Whirlpool. That washer has been a piece of junk and getting it serviced has been a nightmare. It broke, i.e., the computer part, and was out of commission for FOUR MONTHS. I live on an island off of Alaska, luckily I rented one for the duration but STILL. That was an EIGHT HUNDRED DOLLAR MACHINE. I liked that they are new and shiny and look cool. I hate that the electronics broke after a few years. Ive had washers dryers that lasted TWENTY YEARS. The next set I buy will have plain buttons for cycles and NO ELECTRONICS. None. And still none. Electronics instead of plain buttons. Im not kidding, I will never buy another one with electronics. I bought a top of the line Whirlpool HE top loading set for over $1400 five years ago and that washer has been a bust. I have had a repairman out over 5 times and the last time he took it out and kept it in the shop for FOUR MONTHS. I will never buy a fancy set again. I will buy the old kind with the plain old buttons. Do not make this mistake yourself! Just buy a plain old one!

I installed my new water heater in 2012. Within 3 months, it was not producing hot water. When I called, a helpful person at the Whirlpool warranty line told me it was because there was too much cold water being mixed into the hot water coming from the tank. I hung up... Called again and was told that they would be able to get someone in 2 weeks out to my house to check it. I told them that was not acceptable. I hung up... I called Lowes, where I bought it. The person on the other line finally, after more than 1 hour, was able to get a repair person out there within 2 days. I had to pay the fee to have the guy come look at my hot water tank, and tell me that he hated Whirlpools. He called Whirlpool, 3 times; he was hung up on 2 times. He explained what had happened was I had a hot water leak, that it probably it was overloaded, the thermostat control everything else was fine. However, that I had installed the heater myself not a professional. Therefore it was not up to NATIONAL code; therefore, Whirlpool refused to honor the warranty. So, short version, in order to get the tank repaired, I was supposed to spend an additional $300-$400 to bring the heater up to code for them to honor the warranty. What you ask made my heater out of code? It is outside in my utility room, and the flue was cut to fit and the OUTSIDE vent pipe was not above the roofline. It didnt matter that it is not in an enclosed space, that this was nothing to do with the reasoning the thermocouple went out.I simply turned up the heat, so far so good. Will I ever buy another Whirlpool? No. I have a Whirlpool fridge bought before the hot water tank situation. The ice maker went out within 6 months of purchase. When I called to have it repaired, the service guy stated he hates Whirlpool. The piece he had to replace was plastic that was replaced with a metal piece that should have been metal to begin with.

We bought a nice stainless dishwasher from them and got the three year extended warranty. Parts of the racks have slowly been breaking off, and now its started leaking from the bottom at the end of its cycle. We called Home Depot only to find out we were 3 days over the warranty, and basically out of luck! We will never buy another Whirlpool again, or shop at Home Depot.

I have a 5yr warranty. Im 3yrs in on the 3rd repair. Horrible. This time they cant get the part and Ive been dealing with them for 5 almost 6 months. I spend countless hours on hold trying to get a real person... When I do they send me to someone else where the queue starts over. I paid $400 extra to just have them replace the fridge and its been over a month and they cant even get a new one delivered. Just refund my money! This is beyond the pale. Dale, Sunrise Beach Mo.

Retail price, $3100. Purchased from Sears Outlet for 2/3 of that amount due to dings on a side panel, back and some blemishes on the front. Still sold as new with a new warranty (Good thing!). Ive had full use of the unit for 1 month out of 3 that Ive had it. Freezer stays at a temperature in the mid-20s and, after 4 repair visits, it turns out the compressor is faulty and now Im waiting for the 2nd part to arrive and be installed to see if that corrects the problem. Sears stepped away from the problem saying it will be repaired. Whirlpool has wonderful telephone support that is totally committed to me staying with a faulty appliance until its fixed. My view is that a unit that expensive, should be no problem to replace allowing Whirlpool to take as long as they want to make repairs and re-sell it. But no; their commitment is to keeping the refrigerator in my house and running a service tech back and forth while I continue tossing food that cannot be used.

A reliable machine at a very really good price. A nonsense machine that does a very good job at cleaning our clothes. Has a good number of features that make washing different materials easy and safe for their fabric types.

The front of the stove gets so hot you can burn yourself and I feel it is not safe around small children or grandchildren, and it should addressed to fix the problem not just cover it up. Please give me the info to fix the problem before I have to sue over my grandchildren and great children getting burned.

We purchased our new Whirlpool Cabrio washer on November 1, 2013. From the start this machines performance has been a disappointment. We bought the machine at The Brick (I should have known better) where we had made several purchases over the years ( I guess Im a slow learner). Right off the hop, my wife and I noticed that the clothes were not coming out clean. Even though the machine is Eco and therefore advertises that it uses less water, there should be enough water that the clothes at least get evenly wet. That may be a problem with the agitator not seeming to have the guts required to pull the clothing down to the bottom of the drum. We went back to The Brick and told them that we were not happy with the machine they had sold us and quite predictably they told us that we should call Whirlpool (This was less than a week after we had it delivered. Did I mention that I may be a slow learner?). We called Whirlpool and they told us they would have a tech out to take a look at it on November 11th. Wow, I thought. Hows that for service. A repair guy coming out on a statutory holiday. Of course it didnt happen. When we called them back to ask if their repair guy had made it home okay, they claimed that we werent there when the repairman tried to call to confirm his arrival time at our home. We hadnt left the nest the entire day. They then told us to go back to The Brick. We went back once again and told them, yet again, that we were not satisfied. This time they agreed to send their own man over to take a look. He came over yesterday and watched the machine go through an entire wash cycle and then said that there really wasnt anything he could do, as even though it may do a crappy job of washing the clothes, it at least appeared that mechanically speaking there didnt seem to be anything wrong with it. We called Whirlpool back today and they said that there isnt anything wrong with it mechanically so from their end, at least, the story is over. What kind of customer service is that????? Maybe Whirlpool and The Brick deserve each other, but I think we should get better treatment than that

I purchased a total of four Whirlpool appliances in June of 2008. Almost thirteen months after the installation of all four appliances, I experienced a problem with the control panel on the Gas Range GW397LXUB, and a sensor control problem with the Microwave GH5184XPB5. Fortunately, Whirlpool agreed to repair the appliances at no charge because it was so close to the end of the warranty. The microwave was an easy fix and simply had to be unplugged, reset and plugged back in. However, the entire electronic control panel had to be replaced on the gas range. Several of the buttons simply stopped working and I was only able to bake at 350 degrees. Again, almost thirteen months after the installation of the new control panel, it happened again. Same buttons stopped working. When I contacted Whirlpool, they refused to replace the part because I was no longer under warranty. Whirlpool refused to admit that there was a problem with the control panel, so I guess it was a crazy coincidence that I experienced the exact same problem on both. I filed an official complaint with Whirlpool in hopes that if enough people do so, they will issue a recall. I am now experiencing a problem with my refrigerator ED5FHAXSB03. The fan vibrates so loudly that you can hear it throughout the entire house.

This dishwasher is noisy, it does not get the dishes clean, and anything that is remotely lightweight gets thrown all over. This must be one of Whirlpools cheapest models as I have had other Whirlpool products and they were fine.