I bought this washing machine after having my Kenmore for 20 years. This washing machine is a nightmare. I have to wash my clothes 2 or 3 times, to get them clean. Everything has residue on them. Once a month, I do use a cleaning tablet, and between loads, I wipe the washer out too! This is the biggest piece of junk! Save your money. Buy an old school washing machine.

I bought a pair front loading washer & Dryer May this year and took Delivery in June. First problem was with touch controls. I should have Known then it would be trouble, they replaced it then we went home to Fl. - Aug. Returned in Oct - used the machine eight times total and it locked up with our Clothes inside in water. Called for service, was told it would be a week before someone could come, then was told after four days it was the mother Board and it would take at least another week to get our clothes out. Their Service is the worst I ever have dealt with. The whole house - we Bought Whirlpool based on the Maytags we bought for our House in 2004. Never a problem but those Maytags were Maytag - not whirlpool. I would never buy any Whirlpool Appliances again. It is sad because I try to buy American made to support our fellow Brothers and sisters in the work Force but now I will buy made anywhere as long as it works and has reasonable service. Whirlpool is not the same as I Remember from years ago.

Recently, I was having a problem with my Whirlpool gas range so I contacted the 1-800 number. Long story short, the repair cost was so high I would be better off getting a new range. But believe me, it will not be a Whirlpool.

I have a Whirlpool Cabrio WTW5640XW and I was able to get the belt back onto the pulley, about a month back and it ran, loudly, but it ran. Last week the belt popped off again and now the pulleys are screwed, so I probably won’t buy another motor (for the sake of the pulley). Ill get a front loaded Kenmore or something as I was never completely happy with how this thing washed and (didnt dry) our clothes.

We moved to a new home with all new Whirlpool appliances. We have been here 4 weeks and so far the stove has had a faulty part replaced in oven and now my microwave will not fully pop popcorn. Wonder what to expect next?? If you have a choice dont buy this brand. Inferior product.

My family purchased a newly built home from a reputable homebuilder on December 21st 2019. On the first week of January 2020, we noticed that our upgraded Whirlpool dishwasher, model #WDT730PAHZ0 was shutting off mid cycle, resulting in dishes remaining dirty. The technician gave us an estimate of nearly $500 for replacement of pump motor assembly. He also informed us that this particular model is well known for having this defect. We are requesting that Whirlpool stand behind their reputation for producing reliable high quality products by replacing our dishwasher.

I have a 1 year old Whirlpool washing machine (Model: WFW94HEXSW Serial:C04151969). The grease from the drum is found to be the cause of clothes being ruined during the wash cycle. I waited over 3 months for a replacement. The drum arrived broken. I ordered again, and it was then said to be on back order. The water shut off developed a slow leak, causing the water to fill, and flow out the front door, causing carpet damage. We have been forced to throw away good clothes, and pay to have our clothes washed, at a not so local laundromat. We feel it would be more than reasonable to have our washer replaced, and professionally installed immediately.

This refrigerator well paid for itself. I had over 25 years and it was still in good working condition. I had to leave it behind. I moved to a place where fridge was already. I hated to leave it behind. ‘twas offered to Goodwill but they never answered the phone for it. I surely hope someone got it.

We bought Whirlpool Gold Series on July 6, 2014. Refrigerator, range, microwave & dishwasher. Our refrigerator - we have the repair company out almost every month cause the icemaker was constantly icing up and wasnt making the ice cubes single, would come out all attached to each other. So after arguing with Lowes and Whirlpool we were able to get a different refrigerator in February of 2015. Now in April 2015 we are having trouble with our microwave with the light flickering off and on when we open the door and sometimes it work and sometimes it doesnt. The repair company has been out 3 times for the same problem telling me that where the door closes are 2 latches that when not lined up cause this issue, so the repair company replaced the 2 latches and a month later it started happening again. So they came out and replaced the light socket. Now we will see how long that last.Now for the range which is the AquaLift Self-Cleaning which doesnt clean the oven at all. It was like I was back in the early 1950s, only worse. The baked on grease spots, you cannot get off at all. To me this is false advertising and the stores personnel lied to about all you have to do is pour 2 cups of water in the bottom of the oven, press the self-cleaning button and after 40 minutes of cleaning and letting the oven cool a bit you just have to wipe the oven down with a damp cloth and the oven is clean. Not so much!!!Wish I had all my old appliances back because they were made to work correctly. The new appliances suck for the amount of money you pay for them. So please beware and do research on the appliances you want to purchases otherwise you will get ripped off with no satisfaction for your hard earned money you spent on them. I have always had Whirlpool appliances and have loved them but these new ones we purchased are nothing but junk.

Some years ago I bought a whirlpool water heater from Lowes and the thermocouple went out. No big deal, so I thought. I went to Lowes, picked up a new one and tried to replace it. It wouldnt thread even though the package stated it was for my model. I went back to Lowes and they gave me another one, same problem. So I called Whirlpool, they said it was a left handed thread and they discontinued it, but they could send me a conversion kit at my cost. So at that point I was 2 wks out so I paid for the kit. I received the same thing I bought from Lowes. I was so frustrated I ripped the thing out and got a new one. That was 2 yrs ago and now I am having the same problem. I called whirlpool and they want me to pay for the replacement part. Mind you, the heater has a 6-yr warranty. I went to Lowes and they wont replace it. They sell items that they dont stand behind. I will never buy another whirlpool item and I will never shop at Lowes again.

My story begins in August of this year when my wife and I built a new home. The builder provided Whirlpool appliances in the kitchen. The fridge has continually tripped the breaker and after numerous visits from the builders electrician, we finally also had the Whirlpool service technician check out the fridge too. After the control board was replaced, and the interior light housing was replaced, it turns out the wiring harness in the fridge is faulty and is not repairable. According to your customer service team, the fridge will need to be exchanged. I have made numerous calls to the suggested numbers (866-698-2538 & 800-253-1301) to find out the status of the exchange. Each time, I have been told that my file is with the review team, and that if I have not heard from them in the next three or four days, that I should call back again. I have not been able to contact the review team directly myself, as your customer service team is either unable to or is not allowed to share those contact details. So I am relegated to wait and then call back again. I have lost track of the number of calls I have made, and the hours spent on hold because of the high volume of calls or re-telling the whole story. The fridge was determined to not be repairable on November 19th. I am not sure if this is the treatment you intend for your customers, or if this is an anomaly.

Was very excited to have purchased Whirlpool stove with convection oven. The paperwork from Home Depot showed SELF CLEANING. Due to not feeling well from cancer I didnt realize it was AQUALIFT! A few years passed but I never used oven. Pandemic changed that. When I tried Aqualift. Did it 3 times in a row but nothing was clean. Called Whirlpool & they offered to send me a paste I could rub in & rinse off. THATS NOT SELF CLEANING. ITS MYSELF CLEANING plus cancer in abdomen so difficult for me to do. Class action suit is being filed again but not sure if it will be for 1 state. Many complaints on Whirlpool & other companies using aqualift.

I purchased a brand new Whirlpool Cabrio washer and dryer set not even 2 years prior. When I first started using it, I pulled shirts out of the wash after being ran through and found deodorant marks still on the inside of the shirts. I had to wash all of my loads on heavy soil and still had to run some loads through more than once. The wash machine quit working about 1 month ago, so I had a service man out to look at it. It ended up being the control panel and the part itself was going to cost me $300 and by the time I paid to have it repaired, the total cost was just under $400. The service man proceeded to tell me that Whirlpool had another company actually make the control panels for the Cabrio model and he has serviced several of these washers and when he would repair one part, another part would stop working. I was very upset and bought a new wash machine. I would like to add, I am a single mom with a 2 1/2 year old, so the wash machine was not used excessively in any way. I dont work outside so my clothes are never soiled heavily. Needless to say, my washer was not under warranty so Whirlpool couldnt do anything for me. A wash machine should last longer than less than 2 years. I would not recommend this model to anyone. And for Whirlpool to put their name on such a poor product is very disappointing since I have had good experiences with their products in the past.

Whirlpool cabrio wtw7800xwo - During the 12th month of the use of this washer, the lid broke. I called Whirlpool to schedule a repair on it. I got someone here to repair it, and it was 7 days over the 1 year warranty. I don’t think this is fair when they sent the repair guy out too late when I scheduled this right before the 1 year was up. I came about looking this up online, and I find I’m not the only one with a 1 year lid. My next washer will be a 1980s built to last. This was the worst $1,100 I ever spent. I had to choose 1 star. Wish it had a choice of - ★★★★★.

The board manufacturer number W10312659 went out. They replaced the board. The oven was 6 months old, luckily was still under warranty. We didnt purchase a extended one because mostly it had a good name and brand. Well after a year and a half the board went out again. It gives error code H5P which there is no error H5P. So the boards out. It is very costly and thats with you doing your own service. Never will I buy another Whirlpool stove.

Water heater model N40t61-343 - Why does a water heater fail after 4 years when there is a warranty for 6 years? Is this water heater an omen for Whirlpool? I have a wife who is terminal and I trusted the Whirlpool name for hot water. What are Whirlpool going to do about this water heater?

This is a good size fridge/freezer with double doors 25.4 cu ft, its given us good service for 13 yrs without any problems. My only complaint that I wish it was more quiet. (Whirlpool brand) double doors, ice maker w/ water and lights.

Duet Washer GHW9150PH0 - The washer is about nine years old. Last year I got the dreaded F-11 error code, and had to purchase a new controller board and install it. Now the spider arm on the basket has snapped (cast part). Ive been on the phone with Whirlpool for over a half hour now, and all I get is We have to send a service tech out, and you have to pay for them. I have the broken part in hand, I know the Whirlpool part number, yet they want me to pay for a tech to come see the part and confirm it. Ive been unable to talk to a manager yet, none are available.Eventually the lady agreed to replace the broken basket, after telling me at least five times she could not, but she refused to replace the tub which was destroyed when the basket broke. Ill be calling back to talk to another agent soon.

I recently purchased a Whirlpool refrigerator, model number WRT351SFYB00. Several months later, I noticed a small amount of water on my kitchen floor. I moved the refrigerator and found the hard wood floor under it had been completely ruined, so the leak had obviously been going on for a long time. Possibly since day one. I called a repair man. He identified the leak was coming from a cracked drip tray which was not uncommon. However, much to his surprise, due to the design of this model, he was unable to remove and replace the tray. He explained there was a metal panel bolted in place that was preventing him from replacing it. He said this panel was also bolted to the compressor. Therefore, the best he could do was caulk whatever cracks he found in the existing tray and hope for the best. It goes without saying he could not guarantee his work like he normally does.I noticed this same complaint on a user forum website on Appliancepartspros.com, so this refrigerator obviously has a significant design flaw. My repairman said if it was his refrigerator, hed get rid of it, and also indicated that after seeing this, hed never again recommend Whirlpool to anyone. All I know is that Whirlpool is permanently off of my list now as well.

I purchased a Whirlpool catnip washer from Brandsmart in August of 2010. It worked fairly well, but would sometimes need for clothes to be rearranged in order for the spin cycle to complete. In June of 2013, it started to not wring the clothes out completely. It then stopped working. I called a repairman and got an estimate of $550 dollars, but I paid $578 for it.I called Whirlpool and spoke to the supervisor of the consumer concern team. She offered me a fifty percent discount on the parts for the repair. I checked the web to see if anyone else had any problems with this product and found several. I suggest you do your homework before purchasing a Whirlpool washer. I was positive they would do more, since it’s such a prestigious company.

I purchased a 50-gallon Whirlpool natural gas water heater (12 year warranty) from Lowes approx 2.5 years ago. Just before Thanksgiving, the pilot light started going out once a day, then twice a day. Now, I can light the pilot light in Pilot mode but as soon as I release the red button, the flame goes out. I called Whirlpool and received phone troubleshooting support resulting in a recommendation to pick up a new thermocoupler from Lowes which I did. While searching for someone to install (unfortunately Im not that handy), I ran into the thousands of complaints filed about the very same problem Im having over a number of years and right up to todays date. I called Whirlpool back and got the same song and dance. Theyd be happy to help me troubleshoot if I can get the required meters etc. to test devices, do draft tests, etc. They claimed the problems were fixed with the newer model that I have but certainly cant explain why I have exactly the same issue. What they are not willing to do is stand behind their product and get me hot water. Tried calling Lowes and got the response that I have to deal with Whirlpool. It appears that this newer BFG model is just as flawed as the older model and the warranty is pretty much worthless other than getting a few parts. I used to think that Whirlpool products were reasonably good, however, I will never purchase another.

Whirlpool Gold Series Dishwasher - I wish I had discovered this website BEFORE I bought this piece of trash last year to replace our antique Maytag that ran like a champ for 10 years. But after 10 year the gaskets wore out and it started leaking. Even at ten years old that Maytag cleaned and dried better than this brand new Whirlpool. My complaints are the same as everybody else here. Doesnt clean even slightly soiled dishes and then it doesnt dry any of the silverware, or plastic pieces like measuring cups and tupperware. All are totally wet and need to be hand dried. So, why am I cleaning the dishes beforehand and drying them after??? The only good thing I can say about this unit, is that it is quiet. But, as my husband said, so is a brick, and a brick would be just about as good at washing and drying our dishes. Buyers Beware!!! This is a terrible product. Turned me against Whirlpool appliances forever.

I purchased a washing machine FS65 on 10-30-2005. In Oct. 2009, my washing machine developed some fault so I contacted the Whirlpool service center and got it repaired. Again in Dec. 2010, the appliance became faulty and so I contacted the service engineer to attend to the machine. He repaired it and I paid 2500/-. But the very next day, my appliance showed the faults again. It was rectified with replacement of PCB and I was charged 2786/- on 01-20-2011. Again on 09-04-2011, the machine became defective. On the call to service center on 09-05-2011 and attended by engineer on 09-06-2011, I was informed that PCB is defective. I failed to understand that the PCB replaced in January was of what quality that it has to be replaced now after such a short span of time. I feel that this is clear cheating with me.

19 gallon Electric Whirlpool water heater Model #e1f20us015v - Purchased this water heater from Lowes to provide hot water to small apartment with no kitchen for my son, built in my garage. Had unit professionally installed within 1 foot of bath to provide hot water for shower and sink in bath only. Hot water lasts only 5 to 6 minutes and takes approx. 2 hours to recover. My son cannot even take a normal shower! ntacted Lowes who was unable to help and told me to contact Whirlpool. Contacted Whirlpool after my model number would not even come up on their website. I asked tech what was the normal expected amount of time before hot water depleted. She did not know. I asked what was the normal recovery rate. She did not know. I asked for information on the energy rating. She said there was no information available. I asked how I could receive a refund. She said that they could only send a plumber to check unit and that nothing would be done if it was heating water. I asked to speak with a supervisor. She said none were available and said one would call me. I never received a return call. VERY DISSATISFIED with Whirlpool on this issue. It appears my only recourse is to purchase a new water heater and scrap the present one.

The machine Will Not Clean the Clothes. Had to Buy A Maytag Washer.

Piece of crap. We built home 2 years ago and have all gold series appliances! They are all CRAP. Wish we would’ve upgraded to KitchenAid. Dishwasher won’t wash, microwave has hot spots and has to be unplugged and plugged back in often to work. Freezer side of the refrigerator will stop making ice because it freezes up often! NEVER buy Whirlpool!

I am so unhappy with your product. Constantly have to restart machine. Never had a problem with my other washer. Takes forever to do laundry. Hate it.

We bought this Cabrio washer WTW6400SW2 several years ago. Immediately after having it delivered and installed, it started displaying an F1 fault code. The main control board was replaced under warranty. It happened again within six months. Another board was replaced. That board lasted another six months. The warranty was up by then, so I used the machine by hovering over it and restarting it every time it failed. After two years of this piece of junk, we put it in storage while we worked on the road. It was brought out on 10/01/11. I called a repairman (who came on 10/04/11) to come replace the board again. He told me that the last two times it had been replaced with the same defective board, that Whirlpool had never fixed the problem. He claimed he had the new improved board, which he replaced for about $350. Two days ago (361 days later), it went bad again. The same repair company came back and said it was the board again. I just tried chatting with a person working on the Whirlpool website. They (of course) said they would do nothing about the washer. They do not stand behind their product, obviously. Does anyone know of a class action lawsuit over these washers? It is a ridiculous amount of money to spend for a product that does not work. This is just wrong!

I have been trying for a month to get my fridge repaired. 2 techs later and still nothing. The 1st tech never turned in his report and I was informed by your customer service that it was my problem and I had to try to track him down and get it turned in. Tech #2 just left my house. He walked in, stuck his arm inside the freezer and said feels cold to me. I pointed out the melted popsicles and that the ice maker was not making ice because the freezer is not freezing. He then said he doesnt have the tools to do the repair, if it can be fixed, and to call him back after the Holidays. I have been w/o a fridge since Thanksgiving... a month. And no one has a solution. I was sold an inferior product that has a manufacturing flaw but I have to suffer for it. $800 out of my pocket and all I get from Whirlpool is Oh Im sorry to hear that. We can send out another tech. The fridge is less than 6 months old and still under warranty. It is a defective product that Whirlpool refuses to stand behind. I guess they are trying to wait out the warranty period so they are off the hook and we are stuck buying a new one or paying the tech for the repair. DO NOT BUY WHIRLPOOL PRODUCTS! Go Samsung, my previous model.

I am concerned that Whirlpool microwaves installed over the stove have extremely faulty doors. I have two homes in which I have Whirlpool microwaves, and both have huge cracks in the door and small pieces inside the doors beginning to fall out. It deeply concerns me that it will cost more to replace the doors than to replace the microwaves. I have always believed in Whirlpool appliances but now feel that I will have to change brands. My question is “What in the world is wrong with your doors that they crack so easily and the company holds no responsibility with such faulty work?” I would simply think that this was just a faulty door on my microwave, but I have two that are cracked! This definitely means you have a faulty product.

BUYER BEWARE!!!! Dishwasher less than 2 years old and pump & motor assembly went out. You would think and hope that an appliance would last longer than that... Contacted Whirlpool and they were not helpful at all. Will not be buying anything made by Whirlpool again...

Purchased a Whirlpool Cabrio Washer 5 years ago because our other washer died after coming home from vacation. Its just 2 people in this household so I dont do mountains of laundry. The other machine lasted 15 years so go figure. We purchased the Cabrio from Lowes. Got the extended warranty but as it goes the machine fails when all warranties expires. Over the last couple of weeks this machine started to not complete a wash cycle. All lights go off except for spin light and machine stops. Even asked the person in charge of washers and dryers at Lowes about this who then told me to get an extension cord and plug it into a different outlet. Seriously! I have had to unplug the machine after it fails to complete cycle, wait 5 minutes or so, plug it back in, select rinse and spin, it fails again 13 minutes left in cycle, unplug again, plug it back in, select drain and spin, wait for it to MAYBE complete that cycle. Do not purchase this type of machine. Just for a technician to come look at it is $100 or more and to replace whatever circuit board is probably another $300 or more. Screw that! Going to find a good old fashion one if possible. Piece of junk. Not going to spend $700 or $1000 just to wash clothes for 2 people.

I purchased a home that came with Whirlpool appliances. I begged the company for GE or Maytag. Of course they went with the cheapest they could find. I must admit the microwave gets very hot but the dishwasher is a piece of crap! The water doesnt get hot and the dryer doesnt work. They tried to tell me it NEEDED Jet-Dry. I own 4 homes and have lived in all of them. Ive NEVER used Jet-Dry and all the others work perfectly. Run as far as you can from Whirlpool!

The interior has an excellent layout and accommodates our oversized dishes. The racks operate with ease. The outside appearance is tastefully done and the noise level when in operation is very low compared to other brands we have owned. We are pleased with the overall operation of this unit and would recommend it to others.

Front-loading does not do good job of rinsing. The Whirlpool Duet will not last longer than 2 years. Whirlpool recommends that owners purchase a new washer every 2 years. Whirlpool suggests owners purchase new clothes each week to avoid washing. Any owner would be required to quit their job in order to wash clothes. The Whirlpool Duet front-loader requires 12 hours per load. This means that only 2 loads can be washed in a 24-hour period. Each load requires 10 rinse cycles to remove suds.

I have had this front loader for 5 or 6 years. My clothes absolutely stick, I cant stand the smell of them. I have used Affresh, the recommended cleaner 3 days in a row, multiple cycles, no improvement. I did the vinegar treatment, leave the door open etc. What is upsetting is I have read Whirlpool has been aware of the mold and mildew problems of front loaders yet continue to manufacture them. The gasket in the front enclosure pockets at least a cup of water and other gunk from the wash. A waste of money!!!

The agitator is higher than any I have seen and when we washed aprons that have plastic buckles on them, they get stuck under the agitator. When complained their solution was to use laundry bags to wash 15 aprons in, they are long aprons. Paying a lot of money for the machine and it being commercial I didnt think we would not be able to use it. The whole machine shut down when three of the buckles got stuck. The washer is model # CAE2793BQ and I would suggest that no one purchase one of these machines.

I have a one year old Whirlpool refrigerator which was fine for 6 months. Since then it has been a nightmare. If Lowe’s had not intervened on my behalf, I never would have gotten service. Have had at least 6 service calls, 2 new ice makers and various other parts. It should be bright yellow.

My comments are similar to all the other comments on here regarding the Whirlpool Cabrio washer: I bought a Whirlpool Cabrio 5 years ago and have been sorry every wash day since. I have to wash my clothes twice because the machine doesnt fill the tub with enough water to get the clothes clean. I have tried using the bulky setting for all loads to try to get the water level high enough to at least cover the clothes. This is a terrible design and the worst piece of junk. I will never buy a Whirlpool product again...

We too have nothing but problems with our supposedly top of the line convection/microwave oven. Purchased in 2010 in February for new kitchen. From start, original microwave installed did not work, would not cook or heat. Dealer replaced. One year later, same problem, but now out of warranty. Had to pay labor, costs, and parts to get fixed. Fast forward 13 months, again magnetron needs replaced, microwave will not work. What a hunk of junk for our money. I will never buy any Whirlpool appliances again, and I will tell everyone I know the same. When you call customer service, they are nice but only say “too bad, out of warranty”. What a joke for a major appliance company to tell customers. It is obvious that this microwave is faulty from the get go, and they just keep on making them the same way and not trying to fix the problem.

I purchased Whirlpool top loading washing machine model # WTW57ESVW less than 2 years ago. It stopped working yesterday. I had a trusted professional repairman evaluate it today. The motor needs to be replaced after less than 2 years?! The customer service reps basically said sorry. I should have purchased the extended warranty. Is it not reasonable to trust that a Whirlpool washing machine motor should last more than 2 years.I am very unhappy and very angry that Whirlpool will not stand behind their product. The last customer service rep I spoke to suggested she could send one of their repairmen and replace the motor at a cost to me of $299.00. So, after less than 2 years, I am offered an amount to pay of about half the cost I paid less than 2 years ago for the brand new washing machine. My home is full of Whirlpool appliances. I have been a good and loyal customer for over 30 years. I am very angry and upset with Whirlpool. Please explain to me why it is not reasonable for me to trust and believe that a Whirlpool top loading machine that is well cared for and not abused in any fashion should last longer than 2 years? Is this being a loyal Whirlpool customer gets you, I should have purchased the extended warranty”? We are talking about a motor here, not a fabric or bleach dispenser that breaks. Although, those parts should not break either, there is a big difference from something like that and a motor. Please contact me as soon as possible at either number listed above. Thank you.

I am completely dissatisfied with the Whirlpool Cabrio top loading machine. Our washing machine is less than one-year-old. It doesnt get the clothes clean, especially the darks, and it is so rough on the clothes that they come out twisted tied into knots. The dark clothes come out dirtier than they went into machine. Even though we use the dark detergent on the dark clothes and program for an extra rinse cycle, the clothes come out with white powder all over them. They need to be washed again and sometimes again. And sometimes they still dont come out clean. That is not very energy efficient. The clothes come out of the machine so wrinkled that everything needs to be ironed. I can imagine making washing machine that doesnt do its primary function, which is to get clothes clean. Todays families do not have time for this extra work.

We purchased our basic Whirlpool refrigerator model # WRT318FZDM05 from Lowes on September 13, 2019. We bought one of the more basic models available because we have owned higher end fancier refrigerators which have had multiple problems and not worked. So this is the 18.2 cubic feet top freezer model. About six weeks after owning it (conveniently just past the 30 day return window at Lowes!) we began to notice that our freezer wasnt freezing properly or making enough ice. There is only one control panel in this basic fridge so we turned it up. While this cranked up the freezer, the refrigerator compartment began to freeze its contents. So we had to choose between soft serve ice cream and refrigerated eggs and milk or hard serve ice cream and frozen eggs and milk! Finally after the holidays the certified Whirlpool appliance technician came out and recommended a repair with replacement of start device and control board. His report: Freezer not freezing, found the compressor turning on and off. The refrigerator was not even 4 months off the floor and the problem began when it was only 2 months old! When you call the Whirlpool number heres what they say: Welcome to the Whirlpool customer exp. For over a century weve believed in everyday care. Lets see how we can care for you today.Well, when someone calls with a very recently purchased refrigerator whose START DEVICE and CONTROL BOARD no longer work properly that person should be able to return the defective appliance and get a new one. Nope. Not with the Whirlpool experience. You are told that youll have to wait and see if those devices which are ten days away from being replaced in your new refrigerator will fix the problem. So basically NO do not buy from Whirlpool. Turns out a century of everyday care (??) hasnt taught them much about how in this century people need a refrigerator that works everyday!!!!

What a piece of expensive junk! Do not buy it, does not clean clothes well, lid broke, lock broke, now it just wont start. Parts are super expensive. Next one I buy will be a basic washer, forget all the bells and whistles!!

My washer is a top load, energy and water efficient model. I am amazed at how little water it uses and how well it cleans. I do have two issues, the capacity looks huge but it will not take a queen size and double sheet set in the same load. It unbalances and then cant seem to get going again. The other issue is that you cant pause the wash and adjust things, you have to cancel and start over.

We bought Whirlpool duet front loading washer and matching dryer. In 3 years the water level seemed like it was off. Clothes, especially towels were coming out stinky. Eventually you could hear the clothes were merely flopping around wet. Before we could order the repair part it completely quit and locked our clothes into it. I washed my clothes at my daughters house for a week and dried them at home. Within the week the dryer quit. Not having the money to repair both machines, my son gifted me a set of top loading washer/dryer. Again Whirlpool. In a week we had repair service out. They replaced everything possible and it still didnt work right. Since the 90 days from purchase was approaching we returned it to the store and they had Whirlpool send us a brand new dryer. This one worked for a month then stopped spinning. I havent called for service yet because now with 3 broken machines I am so disgusted. When I think about them I feel like I am going to puke. My washing machine shouldnt be the worst thing in my life, especially since it was a lovely gift from a wonderful son.

I purchased this range in 2010 and needed to replace the control panel/switch membrane in 2011 and it was covered by the warranty. Then I purchased an extended warranty and needed to replace the same part again. Then I replaced it again in July 2016. This part cost $147 and you cannot operate the oven without it. There is something wrong with the range that is causing the failure and the cause of the failure should have been fixed when it was under warranty but now that it isnt under warranty, Whirlpool has refused to correct the problem or compensate me for the cost to replace the part.

Whirlpool 29 cu ft French Door Refrigerator WRF989SDAM - We purchased this refrigerator September 2013 for our new home. We moved in November 18, 2013. The refrigerator made a very loud buzzing/humming noise from the beginning and did not make enough ice. The shop we bought it from came on 2 occasions to work on the ice maker and finally totally replaced it. Then the rack on the bottom of the left door fell out and contained glass jars of pickled vegetables. They broke and made a big mess and etched our travertine tile floor. We called the shop and they sent their son out who put the rack in with duct tape which of course did not work so we took it out and put it in the cabinet. We had to pay to have the tile polished to remove the etching. On the weekend of November 15, 2014 the humming noise was so loud that we called the repair person again and they came out on November 17, 2014. At first they thought it was a fan motor but the freezer started making a loud noise and the owner came and said the compressor was going out. Our food was beginning to thaw and we asked if they could at least loan us a refrigerator to use. They brought us an old small fridge which was put in the garage. We took all our food out there. They came November 25 and picked up the fridge to be repaired. We had been told the warranty was out but after calling your company they were told Whirlpool would cover parts and labor. Today is Thanksgiving Day and we can not cook a big meal due to the small fridge and freezer and we are buying bags of ice every day. We have family visiting and must go out for dinner. We have no idea of when our refrigerator will be returned to us. This has been an expensive and disappointing experience. I would never recommend your refrigerator to anyone due to this experience. I really feel we should have been offered a new refrigerator at a discount. We bought all our appliances from Dons Appliances in Okeechobee, FL 34974 and they are all Whirlpool. This refrigerator cost $2299 and our total order was $9,642.84. We would appreciate a response from your company.

This $1,000+ Whirlpool Cabrio washer high-efficiency machine should have lasted between 10-15 years, not 1, not 2, not 3, not 4, not 5! To expect less is to fall for the consumer cave in - where you just give up, give in and buy another. The Whirlpool tech just told the appliance repair guy that was here that the repair would involve a recirculating water pump and a bearing, and would cost $481 to repair. The appliance repairman said he is not in business to condemn appliances, but said he has a Kenmore top loader at his house. Simple, no electronics and less things to go wrong. Well after researching brands and reading reports, I thought I was buying a machine that would last at least as long as my second hand Maytag. Whirlpool has not heard the end of me. I have heard several other people say the same thing. Repair bills are huge and machines do not hold up. So much for buying quality. Now Im going to contact the MA attorney general for the states implied warranty, which means if you spend your money on any appliance, that appliance has an expected lifetime of service. A $1,000+ machine is not expected to fall apart after a few years.

(Model WTW5640XW3) Whirlpool Cabrio worked Good for 11 months (just after warranty Expired). Replaced capacitor would not spin, hums loudly and smells like burning Plastic. Then about 2 months after that Lid locked, failed, replaced. 7 months then Actuator failed and now looks like the Main board give up. I dont know where The original parts are made but they are Cheap junk. New technology is crap for Washing machines, gears transmission and Solenoids last a lot longer plus they clean your clothes. And belts and solenoids.

I have been having a problem when washing my jeans in the Whirlpool Cabrio that I have never had before with my old washer. When I wash my jeans, there are always a few pair, never the same ones, that have an odor like dirty dishrags on them. I always hang my jeans to dry so I do not think it is this. I have tried to add a freshener to the wash cycle, it does not work. I have tried to dry them in the dryer with a scented dryer sheet, it does not work. I am assuming after reading these past complaints from other consumers that it is not getting all of the clothes clean because of the lack of water. I always use the deep water cycle, but maybe it is not enough water as previously suggested. I have had an issue with blankets and other heavy items not getting clean and/or not even wet. Thoroughly disgusted with this appliance!! I love all of my Whirlpool kitchen appliances though!

Dont buy this washing machine. All of my clothes are dingy and gray. I paid $1,751.96 for this set. What a big waste of money. Sometimes the clothes come out with dry spots and then some come out with lint like they have gone through the dryer and yet they are coming out of the wash. Often they are in a very tight large ball in the center of the machine. I distribute evenly around the machine and I dont overload. The brilliant engineer that decided the machine did not need a soak cycle is a person that has never washed clothes. Wish I would have taken pictures of some of the soil still left on my clothes.

I have a pretty small refrigerator since I live in a condo. It has lasted me about 4 years and is still running very well. It is very easy to clean. I dont buy a whole lot of food at one time. The size is big enough to hold what I buy every week. The appearance is decent. Only two people use it every day. I havent had any problems with the refrigerator in the four years I have had it. I get frustrated sometimes when opening up the bottom storage container. If I pull it out too far, it falls to the floor. This happens especially when the container is full of fruits and vegetables. I guess bottom storage container was designed that way for easy removal to be cleaned. I really like the adjustable shelves. I can adjust them perfectly to store food containers and jugs of milk and other drinks. I like the door shelves in the freezer compartment. It is great for small packages of vegetables.

We bought a new washer and dryer back in August. We have always bought Whirlpool. Whirlpool (or the government) now is trying to save the planet by regulating the water level in your washer. The water levels are so low your fabric softener & soap leave lines on dark clothes. IT SUCKS! It does not clean like our old washer. Very dissatisfied and would love to return it and get a washer where you can regulate your own water level. Its unbelievable that a manufacturer can make decisions for the consumer like this AND sell this feature which you PAY MORE FOR. TAKE IT BACK! Ill never recommend this product to anyone.

I purchased a Fridge/Freezer just over 4 years ago. It was an expensive one. The gas is gone and they cannot re-gas it. If I was told this when I was purchasing it I certainly would not have spent this money. I rang the concessional team. They would give me nothing towards a replacement as they had not one in stock, POOR Service for a big company. I am in business and this is not the way I would treat my customers. This has certainly turned me away from purchasing Whirlpool Products, despite having a industrial washing machine and Dryer. For the record, I had 2 servicemen to check it and they were most pleasant. It was beyond repair.

The Cabriolet washer and dryer act funny. I really believe its because they are digital... Didnt they realize that at some point moisture would affect controls? Idiots! And if a cycle is stuck, you cant manually move it forward or backward... you know, how the standard machine works... yeah the one with knobs!! Sometimes computers are not necessary and this is one of them... too damn advanced!! Id rather have a good old American washer. Not worth it. I get a better wash at the laundromat. # pissed.

Whirlpool Cabrio washing machine: The washer was purchased in March of 2012 and malfunctioned in December 2014. After phoning Whirlpool, the machine was scheduled for repair with a factory-authorized company. The first repair attempt was unsuccessful due to a lack of parts. It took 10 days for the parts to arrive, and another unsuccessful repair attempt was made. The verdict is that a new motor control board, costing $350 plus labor, is necessary. With the delay in service and cost of repairs, I may as well buy a new machine.

The washer does clean simple stains. The clothes end up all twisted (sleeves & pant legs). Antiperspirant gets transferred to dark clothing. Large loads do not get clean and the response from Whirlpool was run everything on hot and for longer than normal times. The enviro rating and low water usage claim has resulted in a machine that does NOT fully clean clothes. Look elsewhere and do not buy.

The washer has rust under the rim in the inside - also the paint is bubbling and peeling under the rim of the washer. I contacted Whirlpool and was told that is a cosmetic problem. There is no warranty for rust or peeling paint. I will never buy another Whirlpool washer. I paid over $700.00 for this washer and I dont think I should have a rust problem after 5 years.

We bought a small refrigerator/freezer Model WRT112CZJZ for a guest house. When not in use it was turned off at the unit control panel with the doors left open. There was a power failure and when the power was restored the refrigerator turned itself back on. Needless to say it must have been running for 2 weeks with the doors open and the condensation filled the holding tank and then proceeded to overflow on the wood floor. The floor was ruined. There was no indication in the manual to warn of the unit restarting when power is restored so it must be unplugged or the circuit breaker turned off to avoid a similar problem.

I purchased this Whirlpool Cabrio Platinum washer on 12/1/12. I started getting an F1 fault and all the lights on the machine light up like a Christmas tree during cycles now. I thought I would research Google to see if others were having the same problem. I was VERY disappointed to see all of the same issues others were having with this high end washer. Without even calling a repairman, I know that this motherboard fix is $400+ based on all of the negative feedback. We have a large Whirlpool plant in my hometown, and I hate to see the lack of resolve by Whirlpool.

17 month old Whirlpool duet washer door lock broke. ($300) repair! Had given my old (13 years) set to daughter when I moved. That set has never had a repair or problem! Why do they keep making things with more bells and whistles we dont need and so cheaply made? Frustrated, annoyed and becoming cynical in middle age.

I had a Whirlpool GI7FVCXWY01. Purchase 3/13/2010. I had repairman after repairman come to fix it. The last one probably saved my family and my house. The light in the back corner was not only blinking, but flashing rapidly, much like some wild party light. It eventually stopped. The freezer works perfectly fine, the fridge works when it wants to. The ice maker makes ice some days but not others. The motor on the ice dispenser is completely frozen up. Does that all sound about right? If it does, clean it out and cut the power to it before someone gets electrocuted or your house catches fire.If you cant find the electrical diagram, or the company wants $455 to answer your questions, look under the right side of the freezer draw, but not on the draw. Remove the guard on the very bottom of the unit, near the wheels on the right side. You will feel a plastic bag attached to the underside. Inside that bag is the complete diagram of all the wiring harnesses along with the schematic for the amps and voltages for each wire. Are they telling your circuit board is bad and you will need a new one? Before you do that, inside the fridge compartment, in between the water filter and the ice maker, remove the light cover. Notice that inside that space is the access to another panel. Remove that panel. BE SURE THERE IS NO POWER RUNNING TO THE UNIT FIRST. Here you will find a connection plug with more or less 15 wires that are connected to the main wiring harness. Above that plug you will find a holding chamber. This holding chamber contains water from the filter that is waiting to go to the ice maker. It has dripped condensation on the plug since the day you first turned on your fridge. Your wires are most likely broken and corroded. You will need to have your unit completely rewired, but because of the design flaw that fix will only buy you another 4-5 years. My Whirlpool GI7FVCXWY01 left yesterday 5/15/2014 and none too soon.

On 9/28/16 I purchased 4 new Whirlpool appliances from Orvilles Appliances in Buffalo NY. They were delivered on 11/9/16, the refrigerator was installed. The microwave, dishwasher, and range were not installed until Jan. as my kitchen was being remodeled. Both doors were dented; it took 3 months for Whirlpool to send new doors. After installation water began pouring all over, gallons of it; it took a month to get fixed. The microwave door has a large defect and the surface light does not work; it is still not fixed. Six months later it is still it fixed. I feel like I paid a lot of money for defective appliances. Whirlpool is truly a company that does not stand behind their products; they could care less about their customers. I will never ever do business with Whirlpool again. And Orvilles also refused to help; it was a mistake to shop there.

We bought the dishwasher as part of our major kitchen remodel. After 1 year, 10 months of successful operation, the wash motor failed. We are now faced with paying about 1/3 of the cost of a new unit, after less than 2 years. I dont expect new appliances to last forever, but less than 2 years is ridiculous. I would definitely not recommend this product to anyone.

In 2012 we purchased a Whirlpool Nu40T61-403 water heater from Lowes that I installed due to us not being able to afford a plumber. I have since become a plumber. This morning while attempting to shower I noticed that the water was lukewarm with the shower valve turned all the way to hot. I got dressed and inspected the heater. I began to diagnose the problem. Pilot was out and Gas control valve signal light was off. Lit the pilot and it appeared to be functioning normally. My first thought was the thermopile had failed but seeing the pilot stayed lit this proved to not be the case. I was extremely relieved at that point. Turned the temperature control knob to high and the burner kicked on. At first it appeared to be functioning fine. But within about 20 seconds I began to hear detonations within the sealed combustion chamber.

I purchased a Whirlpool refrigerator on 12-26-14 for approximately $2000.00. I was happy as a clam. On May 22, 2015 it died. No freezer or refrigerator. I called Whirlpool because I had a warranty, or so I thought. The Whirlpool representative was less than helpful, couldnt send a repair man until May 27th. When I told her that that date was unacceptable her response was well I could buy a new refrigerator. To say I was upset is an understatement. Everything in the freezer thawed of course and I cooked for 12 hours trying to save something and gave away all I could and filled the garbage can with the rest. I lost over a thousand dollars in food. Apparently my call to Whirlpool generated a survey sent to me and I filled it out with malice. Whirlpool called me regarding the survey and said they were sorry about the refrigerator but the appliance repair person would be there on the 26th, and oh by the way will you do another survey about their response to my concerns? I was not very lady like when I told them no. So here we are on the 26th and Ive gotten a robo call saying the appliance repair man would be here between 2 and 5pm on the 26th. That repair man showed up @ 4:45pm. He never looked at the refrigerator. I told him exactly what had happened and what noises the refrigerator was making. He promptly picked up his laptop and said I will turn the report in and their office would call me tomorrow to schedule a repair man to come and fix it. Needless to say I was livid and told him that I had been led to believe that the refrigerator would be fixed by him that day. He promptly left right after he gave me his business card. So here we are on the 28th and no one from that company or Whirlpool has contacted me about when repairs will be made. I have never been this upset or angry in my life. I have a worthless piece of junk sitting in my kitchen. Ive lost thousands of dollars. I had saved that money to buy a new refrigerator and Im not a rich person. In fact, I am a retired nurse living on social security and all I want is a working refrigerator that Ive already paid for. Apparently Whirlpool could care less. Im at my wits end as to what to do next. Of course I will call the appliance repair company tomorrow to see if they are going to fix it. I hold out no hope that it will be repaired. And yes, Im tired of buying ice.

Whirlpool corporation is one of the worst company Im dealing with, we bought a new home and had new Whirlpool appliance incorrectly installed in Sept 2018, I raised a ticket in Oct 2018 for my dishwasher which doesnt open properly, flamingo services in Atlanta came and unplugged dishwasher saying its not installed properly. I wait for more than 30 days for parts to arrive and my dishwasher to be fixed. Called Whirlpool/Flamingo. Both dont give confirmation as to when the parts will arrive (note they havent been shipped by distributor). Wow seriously??? Please Im already facing inconvenience since more than month on a brand New appliance. They say no compensation no replacement. Only I will have to wait indefinite time for dishwasher to be shipped and repaired. So much of inconvenience and customer service says she will not call me back and I will have to follow up? What service is this, infinite wait??? Mine is still in warranty, #Georgia #cumming

I saved my money a long time to purchase a new refrigerator (Whirlpool Refrigerator Model ED2VHEXV001). I have very low income so this was not an easy task. April 2009, purchased from Lowes. Ive read similar complaints and also believe there is a defect in the plastic material as there are cracks everywhere on the interior. Shelves have cracked and the whole thing is of poor quality. Seems like Whirlpool should step up and do the right thing. This needs to be replaced.

We have had the same problem with the magnetron in our Whirlpool Microwave Hood Combination. Replaced this part in Dec. 2012 after warranty expired. Cost of repair was nearly cost of microwave. Magnetron went out a second time this week. When I called Whirlpool customer service, the management rep was very hard line about the warranty on the unit and parts. Very clear this company has a product reliability issue and does not want to keep its customers. I dont plan to purchase another Whirlpool product ever. What a frustrating disappointment!

We purchased the Cabrio Whirlpool washer from ABC Warehouse October 18, 2014. They said if we purchased a washer of higher quality it would last longer. We have bought Whirlpool washers for over 40 years. When our last one only lasted for three years they convinced us to spend more money over 1000.00 witha purchase of a 5 year warranty 6 days over the warranty. It is junk. The bearing went out costing 600.00. They graciously offered to sell me another washer. WOW, everyone is sorry that we have this problem BUT you are out of luck. Are they kidding? I will never buy another Whirlpool. They use to be the top of the line but now I feel we are in a throw away world and talk about consumer rip off. FLEECING OF AMERICA AT WORK!!!!

I have had this refrigerator for 23 months. The ice maker has been a continual problem. It overfills and water runs onto my hardwood floor. After four service calls for the ice maker, the defroster heater caught on fire and melted the interior wall of the freezer. Not sure if we fixed the ice maker since we had the fire four days after the last service call. My service rep declared the refrigerator unrepairable. Fortunately I had purchased an extended warranty and they refunded 85% of the purchase price after 2 years of use. Besides the ice maker problem and the fire, I also had trouble with food freezing in the refrigerator compartment. I dont recommend this model, but my repairman says that Whirlpool is as good as it gets.

I purchased a new gas water heater from Lowes and paid a plumber to install it. I have been having problems with it staying lit. Once I noticed the issue, I notified my plumber and the plumber was aware of this on-going issue with these water heaters. The plumber told me to call Whirlpool and have them send me a new thermocouple. Ive been putting it off until now, but realized today over the phone with Whirlpool Customer Service that the problem is with the vent. The manual that came with the water heater has a horizontal venting installation, yet Whirlpool claims that it should be vented through to the roof and they sent me, via email, the correct manual. When I asked Whirlpool how the plumber was supposed to know, she said that he should have known that it was not the correct manual (even though there is no model number written anywhere in the instructions manual) and that we should call to make sure that we have the right manual before installing my next product. So, I need to double check every purchase I make! Or is this only with Whirlpool products? After speaking with two different Whirlpool reps, I have concluded that I need to purchase a new water heater, but believe me, it will not be another Whirlpool!

I have a small condo and this dryer fit into the appliance closet with a few inches around it. Every home needs a laundry system. I bought the washer and dryer in this model. Whirlpool is great!

I purchased Whirlpool washer in 12/2011. Immediately, I noticed the noise and called service. It was a whistling noise. The clerk told me nothing was in the manual and it would cost $65 to have a tech come out. He advised me to wait until it was louder and more consistent. I called again when it was. Gear case was replaced on 5/2/2012 five months after purchasing the machine. I called Whirlpool again in 5/2013 - same problem. I was told the diagnostic call would be $95, labor which is extended for a major job is $85 and the part would be $290. It would cost $470 to repair as the gear case was guaranteed for only three months. This machine is a lemon since the gear case is now shot again prior to the machine being 1-1/2 yrs. old. I called Whirlpool and spoke to Amy (Esc. Sup.) who advised they would replace the part only. The appointment was scheduled; the tech came, did diagnostics reading a manual and said the gear case is shot. I inquired, Well, you are going to fix it today right? The reply was, Oh no, it has to be ordered and its a two-man job. When I arranged for this appointment, this was clearly explained and what I was expecting, two men and the part to be replaced with them. Now its a five-day wait to get the part and then a scheduling issue when they could do it. This machine is a lemon and Id like to have the machine replaced or my money refunded. This is a runaround, scheduling the appointment and having someone show up with the manual and having no parts and not knowing that it was the part which broke again from previously being replaced.

We bought a Whirlpool microwave model # GH7208XRY4 at the Habitat For Humanity store. It was brand new still in the unopened box with the warranty card in the box. The box was undamaged and in perfect shape. We loved this microwave until six months later, it started to throw a code F6 and wouldnt work - it wouldnt turn on or off and we couldnt use it at all. Since this is an under the cabinet model, it was a little hard to uninstall it as its a built-in. I called the customer service center and they dont cover it because the ordinal purchase date was 2012, we bought it in Oct 2014. I guess someone bought it in 2012. They say that since the ordinal purchase date was 2012, they dont warranty. They also said because I had bought it from the ReStore, it was a donated item and would cover it. I told them the box was unopened and it worked for several months, so their stand was it might have been damaged when I bought it. Again I told them it worked for 6 months, so how could it have been damaged when I bought it? They were very unhelpful.

Ive had nothing but problems with the Whirlpool Cabrio washing machine and dryer. The motherboard has been replaced three times, once on the dryer and twice on the washing machine. The inside of the washing machine is going to fall apart because of the rust at the bleach holder. I saw some of the complaints. Is there any way we (consumers) can sue Whirlpool for selling defective units? We are from all across America and there is no way we should all have the same complaint. The stores that are selling us these items should be held accountable. Also the only thing Im getting from them is, Theres nothing we can do. PLEASE DO NOT BUT WHIRLPOOL WASHERS AND DRYERS!!!!

Purchased my Whirlpool WRF989SDAH00 White Ice fridge late September of 2014, received the fridge Early October, todays date is Dec 17, 2015. The freezer is not freezing food properly the last couple of days, all food is unfrozen in the freezer. Have lowered the temp settings has not helped, the fridge section is temperately fine. There is a noise coming from the fridge that sounds like a noisy fan or motor. Phoned Whirlpool Canada, they said they could send someone out. They will charge $100 for call out and over $20/15 min after. I asked whod theyd be calling to service. Said that Id try unplugging the fridge for a couple of days and seeing if that helps, and that Ill call the refrigeration company myself if I need them. Not satisfied with their short term warranties. Especially on such expensive products.

Does everything its supposed to except get the clothes clean! Nothing gets clean, even on bulky setting when theres supposed to be more water in the machine!

My Whirlpool has all basic features and works for household jobs. It is extremely useful for routines like towels and clothing. It also works gently enough to launder curtains and goose downquilts. Operations are very simple and the controls make it very simple.

Bought Whirlpool refrigerator (Model # WRF560SEHZ00) December 2018. After 2.5 years, the door hinge failed and could not be replaced. $1,000 for new door. Dont buy! Too bad there wasnt a 0 option for the rating.

I bought a Whirlpool refrigerator (model number model ised5lvaxwq00) about 14 months ago. The icemaker would not work when delivered. I had it fixed. Several months later, it quit working. It cost $200.00 to have it repaired. The ice door stopped working. I called Alabama Power to repair the icemaker. He advised that it would cost around $300.00 to repair. We are on a fixed income and cannot afford to have it repaired. On investigation, I found hundreds of complaints about the same issue with the icemaker flap. I would appreciate you trying to eliminate this problem.

Whirlpool Cabrio Platinum Washer - The seal on the top of the drum is breaking down. It is cracking at the bleach and soap dispenser. Somewhere in the washer drum or plate is causing holes and cuts in the clothes. The machine is only 2 years old.

For the second time in 18 months, I have had to replace the top shelves on my refrigerator (Model #ED5VHEXVB01) because the cheap plastic borders have broken. The first time it was covered by the 1 year warranty, but this time (12/11) Ill have to pay $130 just for one shelf. Unless the quality of the product has improved, Ill probably expect to have to replace them again within the year. Needless to say, Ill never buy Whirlpool products again. Im out $130 because Whirlpool will not replace them for free because the product is no longer under warranty.

We bought a Whirlpool cook stove with a black top in 2009 and this year, in 2011, while cooking a pot of stew, the stove top burner began to make loud popping sounds. When I went to check it out, there was smoke coming out from under the pan and pieces of glass that had exploded out in small chunks. When calling the customer service line at Whirlpool, they told us that it was no longer under warranty and could not be of help. Their only explanation was that they would only cover a new stove top if it had cracked or broken this way when putting a cold pot on a hot burner. They said their technician could tell if this was why the shards of glass were exploded from the burner.

Overall??? Ive owned this Whirlpool side-by-side refrigerator for a year now. Love it except for semiannual cost to replace the filter. My brother recently installed the same model in his motorcoach. Yes I recommend this appliance.???

Broken drip pan was cracked, replaced, and wood floor damaged, also replaced. Compressor replaced. Ice warmer replaced. Hinge on crisper door broken, replaced. Freezer door handle keeps falling off. All this in first year. Builder purchased 1 year Extended Warranty. Freezer ices up occasionally. Repairman advised using a hair dryer to free up the rails. All this on a $2,000.00 Whirlpool Refrigerator. Do yourself a favor and dont purchase this Refrigerator. Model #G16FDRXXY.

My whirlpool Duet Washer has been repaired twice in three years for more than half the cost of the original product. Now it faces another repair--not worth it!Shouldnt a major appliance last longer than three years? Whirlpool will do absolutely nothing.

Four years ago, my wife and I also purchased a Whirlpool washer and dryer set, washer model no. WTW6600SB2. Within the first year we had to replace both pumps twice, user interface, and control board. (I think that’s what it was called). Of course, that was all covered under warranty. But I to had to wait a week for the part and then another week for the repairman to make it. The user interface and control board had to be replaced because moisture got into the control panel and caused corrosion on the circuit boards which caused them to short out. Then it wasn’t long after warranty ran out, the whole wash tub and drum just dropped to the floor with a full load in it. I don’t remember exactly what was the cause of it, but I do remember it cost me $580 to fix it. Then it wasnt more than two weeks later, the repairman had to come again and replace the control board again. There went another $600 for the parts, labor and service call because this time they had to come from 40 miles away and it’s a minimum fee of $89 just for them to drive up here and another $60 for diagnostics, and then the part and their time to install new board. I paid for this machine twice in the first year and a half. Then after all of that, it was finally working like it should and worked great for about 6 months, then came the UL,LD, and Lid Lock codes over and over unplug, plug in, unplug, plug in. That lasted for about a month, and then all of a sudden, it straightened out. And we only got the occasional UL code. Now in the last year, I have had to replace the drain pump twice and then the drum and motor dropped on the shaft allowing any loose change or other items if accidentally missed during pocket searches to fall into the outer wash tub and get sucked into the drain pump and causing a quarter to be shoot through the drain pump making a hole and caused my laundry room to flood. Well, I decided I wasn’t going to buy another part so I used a plastic repair kit to fix the hole and got it up and running. A week later, the washer won’t wash. It will fill and that’s it. So upon my own diagnostic, I came to the conclusion that it was the user interface that went out due to corrosion I found on it. So for another $120 I can fix it, but I’m not sticking another dime into the washer, nor will I ever buy another Whirlpool appliance. Once all of my Whirlpool appliances die, I will replace them one at a time with LG. I to contacted Whirlpool about my problems and all they did for me was send me an extended warranty offer for 50% off, really that’s it, that’s all I get is a big GFY after all the money I have stuck into this piece of scrap-metal. Well, never again will you have my business as long as I live. Whirlpool, you need to take your hoo-ya and do something about all of these complaints.

I purchased new and installed my heater in 2003. SN: 0253109845, MN: EE3J50RD0454. I started removing and replacing or cleaning heating elements in 2011: pretty good service. In 2015 I noticed black and brown water coming from the hot water taps. I opened it again, cleaned it, and realized anode replacement was required. That is when trouble started.I tried everything usual including 4 foot cheater bar, heating the coupling, impact wrench, tapping with a hammer, etc. Finally found a 700 ft-lb. pneumatic impact wrench on sale at Harbor Freight. After serious wear and tear on my air compressor and about 1-1/2 hours of work with the impact wrench, I got it out. The threads were messed up some, but I did not look close. I had to put the 1-1/4 inch head back in to return it to service while I found and ordered an anode. Could not get one from Whirlpool and could not buy one in Lowes where I bought the heater.The surprise was when I cleaned the threads to put the head back in, I had to use almost as much time and torque to get it to stop leaking as I did when I took it out. Then, when I did try to install the new anode, it required to same effort. Conclusion, There was some kind of imperfection with the threads in the coupling that messed up the threads on the initial installation of the anode, which made it nearly impossible to remove. Whirlpools quality control stinks. The next one will NOT be Whirlpool.

I have had trouble with this AccuBake stove since four months after I bought it in 2011. First, the clean cycle would work intermittently then would not ignite to bake, broil warm or clean. All burners would light intermittently. Every time I had trouble, I called the service tech from Homestead Lumber, where I purchased the product from and he could never find anything wrong. Product would work fine whenever he came out. Finally, it acted up in May of this year while the product was still under warranty and while the service tech was here. The tech replaced the circuit board. One month later, Im still having trouble replacing igniter. Four days ago, Im still having trouble. This stove stinks. Right now, I wish I had my $959 back for the stove and wish Whirlpool had it stuck up their butt.

I recently renovated my kitchen and was so excited to have a new range. Loved the looks of this one so I bought it. I’ve had it a little over a year now, and am so disappointed. The “stainless” trim around the knob area is peeling and the AquaLift self-clean DOES NOT WORK! After the AquaLift cycle, there was a watery mess in the bottom of the oven which was difficult to clean up. It would have been better if I had cleaned it the conventional way. I’m not sure what to do at this point. The area where the trim peeled off looks awful and is very noticeable. Take my advice and do not buy!

After less than 3 years it was the bearings, of course. Then, being handy and not stupid enough to pay the $500 for the whole piece of crap Whirlpool/Maytag tub, we bought bearings from the PartsDr. We just didnt dig deep enough to know that the strators on these things are made out of the cheapest Chinese plastic and are cracked in the SAME TWO PLACES EVERYONE ELSES IS!!! Imagine that? Will scrub my clothes in a river on rocks before I ever buy a Whirlpool/Maytag Chinese again. All front load seem to have the same problems but at least some other companies admit it and are trying to correct it. Will research and as with everything else stay away from the USA/Chinese rusty, corroded junk.

I recently purchased a top of the line self-cleaning Whirlpool/KitchenAid range. Or so I thought. I used the self-cleaning feature for the first time only to find out it literally does not do anything. Whirlpool quickly answered my Saturday morning phone call and were very professional. When I told them the Aqualift did not work, they asked if I purchased the Aqualift kit. No, what does it contain? Two sponges and a scraper. Basically I was told I would have to clean the oven manually. That would be fine except I have osteoarthritis and cannot clean it manually. Shame on Whirlpool and KitchenAid and Consumer Reports for not doing their due diligence and not testing important features accurately, over a greater period of time with real day-to-day scenarios with people who actually know what they are doing.

The appliances in my home range from a Kitchen Aid double wall oven, a DCS single wall oven (I have 2 Kitchens), 2 Kenmore dishwashers, a Fisher and Paykel refrigerator and 2 DCS counter-top stoves (all top of the line). No problems they are great appliances. On Dec.22, I bought a Whirlpool Duet. For 6 months, constant repairs and rebuilds were needed; new computer panels, pumps and new drums. They cant fix it. We have tried everything to get the Whirlpool Factory to fix it or replace it. So far, I have spent twice the original cost to fix the machine (but to no avail) and now you want me to spend another $500-$600 to try to fix it again? No more!

I first want to begin by saying that we have been a Whirlpool family for years. I now own a Whirlpool microwave, hot water heater, washer/dryer, Jenn-Air stove and dishwasher. My problem now is with the Cabrio Washer purchased in 2008. I started having problems in 2011 and the same problem has raised its ugly head again. When I try to use the Clean cycle, it starts at a 60-minute cycle and goes down to a 2-minute cycle in 3 minutes without cleaning or even running water into the tub. This time, it made a terrible noise and stopped. The tub was replaced in July 2011 after having the same complaint as above. The repairman said that the mechanism on the tub to fit into the spinning cycle is made of plastic and is not holding up. Also, in March 2012, a new control board was installed. I spoke to Whirlpool Customer Service and they informed me that they did not have any other complaints about the Clean cycle and that I should call the repairman. Luckily, I purchased an extended warranty. I vote a thumbs down on the Cabrio washer.

Extremely disappointed!! We purchased this water heater about 4 years ago and for the past year we have to manually turn on the burner. Its been a nightmare! We called Lowes to purchase the parts, but they do not sell the parts. There was a nine year warranty. Our last water heater lasted about 11 years. Its such a shame that this one is giving us problems just after 3 years. Im really considering just buying another one. I dont want to continue struggling with this one. Its been a bad purchase and coming to find out that Im not the only one with this problem. If its a defect Whirlpool should at least replace them for the inconvenience. They should take responsibility for selling defective products.

I am on my 3rd refrigerator from Whirlpool. The first one lasted 8 years, the second one lasted 6 years, and now the 3rd one has only lasted 4 years. This is just too much money to pay for a supposedly nice quality product and it go out as the warranty goes out. The second we had to replace the icemaker 3 times and a compressor. Now the 3rd is not cooling.

The smell from the washer has gotten so bad we have to keep the door closed to our laundry room, or the smell will permeate the whole front part of the house, as it is we have to keep the door to garage which is adjacent to laundry room open to air out laundry room. Our friends and guests, are aways telling us we have water leak or something mildewing, or rotting in our house. The washer works well, and I cant find any buildup. We frequently run it through clean washer cycle, it smells OK for a hour or two, and odor returns!

I bought a brand new Whirlpool fridge 3 years ago and it went out completely while on vacation. I lost 5 black bags of food. The compressor went bad due to it leaking Freon or whatever it is called. This is a recall on most models but they say not on my model so nothing is being done. So I will never buy another thing made by Whirlpool again.