The Worst experience with Gold Series Mod WRF 757SDEM01. Purchased from Best Buy June 2016. $2215.00. Within 6 months The interior light began going dark within 6 months. Our very reputable warranty repair service ordered a part that did not repair it. Was only temporary. They did figure out that the circuit board was bad and promptly took care of our problem. Next I kept noticing water appearing on our wood flooring. Let it go because it only appeared sporadically. Called Whirlpool only to find out they switched to a warranty repair service that was inept and inexperienced. Said he could fix it. Blamed it on a freeze-over so I let floor dry up then re-started and refilled. Thought he did fix it cause it made sense. When reassembling he broke to upper freezer try glide. Then 3-4 weeks later I notice one morning water again on my wood floor. The dripping had been running beneath the wood slats and had seeped up through the joints. Now the flooring wood has swollen and will need to be replaced because of this. This is the second time I had to unload all food and store at neighbors and give away. Extremely poor engineering designs as each time the ice dispenser is used, nothing prevents ice from flying out onto the floor ever since day one. Same with water. The release does not shut down to prevent water or ice from pouring out onto the floor when removing any size cup. The refridge doors must both be opened to use the lower level drawer. Loses much cooling with having to always open both. Next, weve come home MANY times with the left refridge door partially open because of the difficulty of the mechanism to secure at closing. This happens to us 5 times a week for three years-honestly!. This was the only refridge we could find that would fit our opening in a 20-yr-old home. The fridge is so heavy one man cant pull it out of its opening. Only 2 very small wheels in front and skids in rear stick due to weight. Weve confirmed this is not a spigot leak from the ice maker. Finally (but probably not) the ice container allow much air in because of having to open the left door that your ice is always melted together plus it too small for a family of two and ice must be purchased when entertaining. And to top it off, the human that took the warranty call this time is foreign and my wife could not get them to get our last name spelled correctly nor the phone number correct after constantly repeating it. This unit and model is an absolute lemon. Im going out today to find another unnecessary $2500.00 to buy another.

Whirlpool Dryer Model WED4815EWO and Whirlpool Washer W10682799 - I have always had great results with Whirlpool products. Both are energy efficient and save on operating costs. I purchased them three (3) months ago. The washer locks during the wash cycle. That took a little getting used to. I have always been able to rely on Whirlpool products. The top loading washer (W10682799) is energy efficient and high capacity. It regulates the water level so you dont have to worry about wasting water. The matching Dryer (WED4815EWO) has a sensor to regulate your drying time or it can be manually set. I appreciate the worry free, self-regulating functions on both the washer and the dryer.

I like my machine even though there is no agitator. It is a top loader so it does not smell. It is a water saver which, when I first got it, I thought that it could never clean the clothes in that small amt of water...but it does clean the clothes very well.

The space could be laid out a little better. The flimsy shelf is not real stable for foods or ice tray. Where the shelf locks into the side wall is not deep enough to stabilize the shelf itself. The flat indentations in the bottom, where they meet the front, have an edge that makes properly cleaning the freezer a bit difficult.

I purchased this Whirlpool washing machine model# WTW4950XW2 and after 10 months of use, it broke down. The repairman fixed it (gear box) and said that the motors and the control boards went bad. I didnt get a weeks use out of it because the motor went bad. He came and fixed the motor and it didnt work once after that. I called Whirlpool up and they sent their serviceman out twice and they didnt do much but reprogram it and both times it didnt do one full cycle. Now they (Whirlpool) are going to put a new control board in and hope it works. Whirlpool wants me to get another years warranty on the machine & charge me $100 and not do anything about all the money I spent going to the laundromat (2 months worth) while this machine was not working. There should be a recall on this machine for replacement & reimbursement of all the time and money lost.

I have the Whirlpool Gold microwave model GMH3204XVQ-1 manufactured in May of 2010. The plastic around the lower door handle is cracking (currently in 4 directions from the handle) and the plastic on the side of the control panel is cracking in the center area and lower side. Neither of these area experience abnormal stress in day-to-day use. Unfortunately I could not get a good photo of the other crack on the lower corner of the control panel but included the one on the side in the middle. I contacted Whirlpool customer support about 1-2 months ago and to date, have not received any type of response or concern from them about this issue.

Purchased Whirlpool washing machine two years ago but transformed into junk within two years. Fraud company only searching ways to loot the money of the innocent customers and manufacturing such appliances which greasing mentally.

I purchased a Whirlpool refrigerator less than a year ago and both the door and icemaker have a problem in which PC Richards, the store I purchased it from, has had to service the refrigerator at least 3 times and have not resolved the problem. The door does not close properly and every time I use the icemaker, condensation builds up. Each time a tech person comes to my home, a different reason is given. I need this problem resolved. I dont need to monitor the refrigerator like a sick patient.

This was the first new appliance that I had actually ever had and I purchased it in October of 2010. After four months, it started make a grinding sound. I called Whirlpool and the repair man replaced the motor. Approximately four months after that, the lid got stuck and the machine would not respond. Same routine as before, but this time the transmission was replaced. While the machine was apart, I noticed the white insulating panel from the bottom was brown in a spot and looked as if it had gotten hot. A month before the 1 year warranty expired, the washer started making an intermittent grinding sound nearly identical to the sound made when the motor went out. This time a different service company was sent out my Whirlpool and the said that nothing was wrong. Now, the machine is out of warranty and has stopped cleaning close and during the spin cycle the you can hear water running into the machine constantly. Last months water bill shows a 40% increase in water consumption when nothing has changed to incur a larger bill. Seeing all these comments makes me wonder why the heck nothing is being done to force recalls on such poor products. Consumers should be treated with a lot more respect than this. I will never recommend a Whirlpool product to anyone I meet. In fact, I will strongly discourage anyone who is contemplating buying a Whirlpool washer machine.

I did not purchase it, the stove came with the house. I like the flat-top... easy to clean. I dont like that any little spill causes a stain that has to be cleaned. I didnt shop for this one. Although I would have this as an option if I was shopping. Low quality would be a problem. I want my stove to last a very long time. But, I dont want to pay a lot of money for it. I have a Whirlpool, glass top (smooth top) built in stove. I dont know the model. It has 4 electric burners, of 2 sizes. It has dials to control the heat amount.

We have had our Cabrio for one year now and we found the agitation cycle to be loud but we have gotten used to it now. The thing we cannot get used to is the sour smell permeating from it. It smells like a dirty mop. Our washer and dryer are in a small laundry room so when we enter it to get to the garage or bathroom, the smell hits you like a ton of bricks. Stinky!!

We ordered the Whirlpool 6.4 CuFt Electric Slide-in Range WEE745HOFS from Costco on 1/3/2017. It was delivered 2 weeks later. The FIRST time we turned on the oven the top heating element caught fire during the preheat and damaged the interior of the oven! The interior paint was completely burned off above the fire, exposing the raw metal. Costco called Whirlpool for us to ask for a replacement oven. Whirlpool refused. We called too. Whirlpool sent out a repairman who replaced the element and PAINTED the damage on the top of the interior.For weeks, every time we turned on the oven, the house filled with smokey paint fumes. I have a chronic lung disease (sarcoidosis) so the paint fumes were a serious problem. We stopped using the oven. Weve hardly used the oven since that time because we have a nice, large countertop oven. I turned on the Whirlpool oven again in January of 2018. The top element burned out AGAIN after less than a dozen uses! I was 2-3 days past the purchase date and again Costco tried to advocate for us but Whirlpool refused to help in any way.My next door neighbor purchased this exact oven two months before we did and she has had the SAME problems (and worse!) with NO help from Whirlpool! I have HATED this oven even though we mostly use the cooktop. A $1300 oven should NOT burn up an element in less than a dozen uses! The cooktop is very difficult to clean, scratches and stains easily. The trim and panel also scratch very easily. Yes, I did purchase the Whirlpool cleaning kit and follow all directions carefully. My next door neighbor says dont bother trying the Whirlpool Aqualift cleaning feature because it DOESNT WORK! She hates this oven too. By the way, ALL of my appliances are new Whirlpool appliances! So far the dishwasher is doing ok but the microwave is 4 months old and the door is not closing completely, so it has to be adjusted often or it clicks rather than cooking. VERY DISAPPOINTED IN WHIRLPOOL!

We just love the hidden icemaker, the outside display for temps, ice, water, external H2O and crushed or cubes, and the LED inside lighting is fantastically bright, the space, moveable shelves, the quiet, the overall efficiency, huge drawers freezer, the wide open doors, the separate temps for vegetables, cheeses, cold cuts, etc. The separate filters in the refrigerator eliminate any smells. Easiest water filter to change we have ever had on any make refrigerator. Over the years, this is the first refrigerator of perhaps 7, we have truly never regretted buying it and frequently comment how happy we are with it!

Ive had so many problems with this washer. Everything has been replaced on the machine and it is still a failure! It has overflowed 5+ times. Stopped draining 4 times (fun getting water out of it...). Have been without a washer for a total of two months! My In-Laws have the same and theirs hasnt been a problem (however it isnt used as much as mine.). Hopefully mine is just a Lemon! Ill never buy another one!!!!! Especially from Lowes. They deem it only a lemon if it has had the same issue for 4-5 times. That is with the extended warranty! TO THE DUMP IT GOES!

I purchased a Whirlpool dryer Cabrio (model # WED7300XWO and serial # M03028918), which has had several issues. We had to replace the felt around the dryer tube twice, replaced the dryer tub itself twice, we had the air flow stop, and now the heat has stopped. Thank goodness I purchased an extended warranty, otherwise who knows what these repairs would have cost. I think I got a lemon. I have had multiple repairs, and days of not being able to use our dryer.

My wife and I spent about $2500 on a new Whirlpool Dutch Door fridge five years ago. 18 months later the evaporator went out and the warranty was only good for one year! We bought an extended warranty, got it fixed and the other evaporator went out less than a year later after that! Next, the circuit board control on the crisper went out. Then, the water filter would not disengage and a repairman had to take the fridge apart just to put in a new filter! And now, the ice-maker has gone out and the fan is icing up like another evaporator is going... Insane! Our warranty is up next year. Once the warranty ends we will start shopping for another unit - and it wont be a Whirlpool - thats for sure. I have never owned anything this unreliable in my entire life! Also, I would say most of the time we have owned this piece of you-know-what it has made a loud disturbing fan noise... What a waste of good money! Run! Run far, far away!!!

We purchased a Cabrio washer in August 2013, in early August 2014 we noticed that it was not getting all of the detergent out of the clothes (noticed it on the dark clothes after drying). We use less than the recommended amount of HE detergent and dilute it in the dispenser, also always use the extra rinse. We just had a Sears service man out at a $100 cost only to find out that he gets these calls all of the time and the machine is operating at the factory settings.After reporting the problem to Whirlpool all I got was we are sorry and a link to how to operate the washer. In the demonstration video it clearly shows that the water level never covers the clothes. I know Im old school but in my opinion the water should cover the clothes so it can properly wet and agitate the items in the washer. To say I am less than satisfied is a gross understatement. Im out the cost of the washer plus an additional $100 and after a year of ownership and contacting Whirlpool less than a week after the factory warranty ran out all I get is an Im sorry you do not know how to operate a washer.

Purchased Model # wtw5000DW0 Jan 3, 2015. Aug 15, 2015 started leaking water. Certified technician came to repair. Aug 17 - new transmission. Sept 3 replaced new transmission with another new transmission. Sept 8 called master technician at Whirlpool, needs new clutch assembly. Both technicians stated they dont know what is wrong with the machine. Sept 10 new clutch assembly and agitator replaced. The machine still makes a horrible grinding noise and is unusable. The technician has replaced everything but Whirlpool says it is still fixable. The Master technician has no idea what is wrong with my machine yet he refuses to call it broken. I have been without a washing machine for 3 1/2 weeks. They refuse to offer a return authorization number. I have spoken to a Supervisor on the phone. She states the warranty is for repair. They wont admit their product is a piece of garbage. They have lost a customer. She stated she will put my complaint in a file.

I purchased a washing machine and dryer 1 year ago. Since then it has started to get spots on the control panel where you select size, temperature, etc. I also purchased an extended warranty through Home Depot and is still under warranty for 3 years. I was told for a few more days is still under man warranty. I contacted Whirlpool and they said it is not their problem and sounds cosmetic - I think this is unfair being that I spent a lot of money and it has started appearing on the washer and dryer. No one wants to be responsible. I am a consumer who is very careful and have not had any spills or cleaned it with anything.

Bought Whirlpool Gold refrigerator, microwave, and stove. The bottom where the freezer is located leaks if you dont slam the drawer shut - many times leaking regardless. The microwave needs to be unplugged/reset about once a month or so because the power dies - light comes on, food rotates, no heat. And the small stove light indicating the burner is on for the front left burner suddenly doesnt light up. 0 for 3 on satisfaction. Appliances are 2-3 years old. Did not get extended warranty. Everyone tries to get you to buy but didnt realize I was buying junk. Will not recommend or buy this brand again.

We purchased a new Whirlpool Cabrio Platinum W10405142B washer and dryer just over 3 years ago. We decided to go back to the top load as we were having so many issues with odor from our front load. We purchased the set at a Sears store in Timmins Ontario and we’re quite confident that we were getting an excellent product. From day 1 we have had issues with having to rewash our clothes. We have lint and white streaks on the clothes as if we were using powdered detergent and they are all tangled. We have always used HE liquid and at one point I switched to soap nuts to get rid of using chemicals. We have now changed to pods and still have issues. When the washer is spinning it is deafening. You can hear it outside for goodness sakes. It sounds like it is about to take off and fly.The cycles are ridiculously long. For a quick cycle the other day and a very small load it took 72 minutes... how is that quick? When the wash is done my clothes are all tangled up and are stretching things out of shape. I am careful what goes in my washer and how large my load is. I know not to wash sheets or towels when I am not home as they will eventually be unbalanced and have Sat all day in the washer only to have another hour of washing when I get home. We are currently doing some work in our home and pulled out the washer. The floor has a rust circle from God knows what. I will attach a picture. The lid not longer closes. I have to hold it down until it locks and it still pops up a wee bit.I do not understand why I am responsible for purchasing a new set when the product I bought should have lasted and not caused damage to my clothes or my flooring. How do we as consumers make the manufacturers responsible for things like this. If nothing else the appliances should be removed from my home by the Company and I should be reimbursed for damages and the cost of a new set. I will continue to look for my receipt as I keep everything and I am unsure what is meant by order #.

We purchased a Whirlpool gas range for $600 in Aug 2015.. On May 2015 the range had an internal board failure (F2E0) and the panel does not control the oven or other features. We found out the part ranged from $350-$400!! Plus service installation! The one year warranty of course ran out but I think this is an outrage to sell an appliance that has such a poor electronic part. I have read a few similar complaints as this is also a Frigidaire model as well.

Our double oven was part of our new home purchase so we really didnt have a choice in product. Brand new. Hardly used. The control board replaced because it went bad 2 weeks after install. After one use it had it replaced and it went bad again. Used it once and again same thing. My mom unaware of the issue used the self cleaner as a favor. Well things went really bad. Because the temperature of the self cleaner was too much for the oven and explode and the inside glass shattered. This is not a product that you would want in your home or would recommend for anyone to buy. They do not stand by their product either. Please do not risk your familys life.

I am pleased with the steel tub, the ability to do an extra rinse and spin and especially the choices of water level that it determines by the size of the load. Its ability save water use. I would repurchase the top loader again. My clothes come out looking wonderful especially the whites and I do not use bleach. It does not get the mold or mildew odor that my last machine would get due to the rubber or plastic made tub. I love it.

Never worked proper form the start, always condensation, bottom froze and top unthawed and vice versa. No help from store or company. During any temp change the fresh food would freeze and top unfreeze and no matter how long you waited and changed settings. Junk.

Aqua clean does not work. I purchased this range this year not knowing aqua clean was different than a standard self cleaning. I had not use the range since its delivery in June until Thanksgiving. One meal in the oven and the turkey had created staining on the sides and the bottom. I have run the self clean cycle so far four times and scrubbed till I’m blue in the face. The greasy stuff does not lift off and the warranty voids if you use anything else. Have already contacted the dealer to see if I can return this!

This seems to be a very common complaint with Whirlpool French door especially after reading other reviews. Bought a WRF560SMY in 2/2014, from Lowes who installed it and promised good service for that first year. Whatever went wrong, they would take care of it, replace if needed, pay for lost food, etc. So far, so good. Now in 7/2015, warranty is up of course!!! And we are selling our home, so thought I would get an extended warranty as another selling point that would transfer to new owners. Well, of course, right after I purchased the warranty, the day after actually, the freezer started buzzing. Took a look and the whole back wall of freezer was covered in frosty ice. So defrosted it, seemed to run okay... For a few hours, same problem. It sounds like the compressor fan is scraping on ice, and it runs continuously. Defrosted again, same problem. So now it is time to break down and get on the phone, which I hated to do since I went through this with Samsung in late 2013, took me 3 months to resolve. Anyway, called Whirlpool Michigan office, which I recommend. They claimed they would cover repairs, and to call their warranty repair dept. to schedule service. THEY told me I was out of luck, as my just purchased warranty would not be good for 60 days. Back to Michigan, they told me it WOULD be covered, and to try again. No go, and this time someone with a middle eastern accent told me not only would it not be covered, but even after the 60 days, it still would not be covered as it was a, GET THIS!!! pre-existing condition! Excuse me, this is not a brain tumor, and Obama did away with that anyway. So tried to call Lowes, who sympathized, but could not help since the warranty I purchased was from Whirlpool, but they would repair if I paid. And be aware that most chain stores require you purchase an extended warranty within 30 days of installation, so out of luck there, but they were nice about it, told me go back to Whirlpool. So another call to Michigan, and FINALLY got a gal at their call center in Tennessee, who resolved my problem in about three minutes. All in all, 12 phone calls. This is a manufacturer issue. she said, not a repair problem. which is what the others were apparently not educated about. It appears, although she did not say so in so many words, that this is a very, very common problem, and Whirlpool will indeed cover condenser or defrost heater assemblies for 3-5 years depending on the model. So she is supposedly calling a local repair and someone will be out in a day or two, but will call us first. No call yet, so still nail biting. I would recommend to all of you with this or other issues to read the manufacturer warranty very, very carefully. There are some things in there that go beyond the standard year, and I KNEW I had read that this problem was covered beyond the one year, and indeed, it is. And also to call, call. Call their Customer Experience Center in Michigan (1-800-253-1301) and if your freezer is icing up, you will most likely get them to fix, depending on the age of your unit. If you dont get satisfaction with the first person, keep calling back again and again, and get the NAME of the person you have spoken with and tell them to document your call. This saved me, as every call I made came up on their screen so they knew I was getting frustrated. But, she assured me, this particular problem is ABSOLUTELY COVERED BY WHIRLPOOL, so obviously it is a defect they know about. Why they dont fix it at factory, dont know but will continue to look for that answer. They got especially cooperative when I told them I was purchasing a home that would need all new appliances in the near future, which is true. Use the Michigan number and keep calling and calling until you get satisfaction. This is a covered repair beyond the one year. By the way, I do not have my ice cube maker hooked up and never did, but still had this issue. With this being said, I am very unhappy that yet another refrigerator failed on me. The Samsung after only 3 months, and the Whirlpool after only 17 months. But I will follow up on this report when and if these repairs are made in a day or two ;-] we shall see, and let you all know. The repair service is Whirlpool certified, so will grill the guy they send and see how many of these he has to fix, and whether it really is fixed So stay tuned. Just dont take your time and get frustrated talking with people who turn you down right off. Be persistent, and plan on about a dozen calls and two hours of your time. Remember to take notes of times, names, what was said, etc. This is the only thing that saved me with Samsung by the way. After 3 months they told me they HAD NO REPAIR PEOPLE in my area, and sent me a check for the purchase price to buy whatever replacement I wanted, but they also made me jump through many hoops, send pictures, docs, all kinds of stuff. Think I can almost speak a mid-eastern language now as well. Not so with Whirlpool though. It seems most if not all of their call centers are in the USA. Good luck to all of you. On my way to defrost again so we can get some sleep tonight without the chainsaw noise, and will update as soon as something occurs here. Hope I helped a little. As a PS, the last gal I spoke with was so very nice and knowledgeable. I told her she should not be taking calls, but promoted to training the call takers, and did take the time to call her supervisors and leave a message at how very good she was, which we should all do if we ever get a nice, educated person on the other end.Updated on 07/29/2015: I promised an update, so here it is. After thoroughly explaining my issue, they promised and delivered a repair person who arrived within the time they gave. He was very nice, but even tho they knew what my problem was, the guy did not have the parts onboard. He said it may take a week or two. So I am defrosting my freezer about every 48 hours to keep it from totally destroying itself. To the guy who exchanged his Whirlpool for a Samsung, I wish you a whole lot of luck if something goes wrong, and it will for sure. You wont get anyone who speaks English, but if you have a Lowes warranty, you may fare better. I can give you details on what will go wrong and how they deal with it if you want. I would advise you to have the Lowes warranty, and not a Samsung warranty, and make sure you get one within 30 days, or you are out of luck with Lowes. Good luck to you. Will update more on my Whirlpool, will say the repairman was very, very nice and gave me his card to call if I had more problems I could not solve myself until the part comes in. By the way, I do not use the icemaker and never did connect it, nor with the Samsung. I pity anyone who has to deal with Samsung directly and strongly advise you to get the warranty thru the store.

I bought a Whirlpool dishwasher from lowest in May of 2011 and it stopped draining, serial # f11601686. I was told it was under warranty and you sent someone out. But surprise, I got a $129 service bill and it couldnt be fixed, computer board gone and drain motor shot. I was told its cheaper to buy a new one. After 10 months of use, we need a new one. I think you should replace my dishwasher and pay for a service call. Oh, the reason they said it wasnt covered is because they sold me a 2007 model.

We purchased a brand new stainless steel refrigerator in 2013. Our 2 year refrigerator stopped producing ice and the freezer stopped working as well. We called Whirlpool customer service and they said they could not help due to 1 year manufacturer warranty only. We called another company (SoBellas) that charged us $85 to tell us that it is the seal system which should be covered up to 5 years by Whirlpool. The man showed me the Whirlpool refrigerator warranty on Google which states the sealed refrigeration parts are covered up to 5 years. There was no specific model numbers listed which gave me the impression this was a standard warranty for all Whirlpool refrigerators. I explained the situation to Whirlpool customer service including the 5 year warranty that is found on Google for everyone to see. I was told that our refrigerator model number did not qualify for that specific warranty. We ended up having to buy extended warranty for $350 on top of the $85 we already spent. This started July 24, we had to wait until August 10 for Whirlpools warranty company to see us. They checked it and said they had to order parts but he supposedly tweaked it to make our fridge run better.... It made it worse and it ended up completely breaking down. We had to buy ice chest and waited until Thursday August 27th for them to finally come back with parts and fix the refrigerator. I took time off from work once again due to our time slot being between 3 and 5 but the guy didnt even show up until 7:30. I could have worked my normal hours instead of taking more time off! The guy never once called to inform us that he was running late. We kept calling the company to make sure we werent forgotten. The guy told us that everything should be working within 20 hours or so, by Friday our freezer was still not working and no ice either, back to square one! I called Whirlpool customer service once again to explain the situation, nothing could be done. The next available time for them to come back out is September 17 for them to come look at our refrigerator. We have been stuck without ice and a freezer, buying food every other day waiting for our brand new, horrible Whirlpool refrigerator to be fixed. Will never ever buy Whirlpool brand again! Actually, we purchased all brand new Whirlpool appliances... Good luck to us!!!!!

Rust started forming early on our washer and spread quickly. Our house is air conditioned and not near the ocean. There was no reason for the rust. Poor quality finishing is the only explanation. When I called to complain I got nowhere. I wish I could show a photo on this website. It would dissuade anyone from ever buying a whirlpool.

I have had a Whirlpool hot water tank now for about 7 years and all I have had out of it is trouble. It wasnt even a year old and I was putting a thermocouple in it a few months later I put another one in it. All I do is put thermocouples in it. I have saved the old ones. This heater is a piece of junk and I am the one whos paying the price for it. I just put a thermocouple in it on January 9, 2012 and I am putting another one in it on January 15, 2012. I have replaced all parts and it still does it. They are going to buy me a new one someday. I’m tired of this. This should not be happening. They are ripping people off. If the pilot light does not light, you have to replace the thermocouple in it.

We bought all whirlpool appliances at our new home 4 months back. Our refrigerator has stopped working from the last month. We had 7 different service team people come in to check and they temporary resolve the issue (taking out a plastic piece from the top of the refrigerator, just re fixing the ice machine, or just walking out of our home doing nothing).Friday someone came and tried fixing it and took about 3 hours. The fridge completely Broke down after that in about 6 hours. Whirlpool customer care wants to send another technician in and want them to have them talk to their technician and maybe after that they can do something. This is the 8th time some technician will be coming home. And clearing these technicians curse whirlpool and dont call them. The customer team at whirlpool suck, there is no damn replacement or repair policy. All scheduling is after a week and whirlpool does not give a **. I really hope this company is sued for the emotional and mental stress and the harassment they cause to their customers. Very frustrated. Have no idea what to do.

This washer was purchased on 12/21/2007. It was in a vacation home that was rarely occupied, therefore washer not used much. On 7/23/2008 the cycle switch was replaced. On 7/20/09 the same problem occurred. The washer may have been used 5 times during the year. The handle and rim also needed to be replaced. On 8/31/09 the switch and handle were replaced again. On 2/5/13 the door latch was BROKEN AGAIN. Now on 7/10/15 the door latch, start switch and cycle switch are broken again... DO not buy WHIRLPOOL products.

I purchased a Whirlpool duet set on sale at Lowes about two years ago. The front loading washer has been leaking when I put in a full load of clothes. It usually floods the floor when it leaks. I am upset and very angry because this leak has ruined the doors to my washer doors. Apparently, the defects with this machine was known by Lowes and the Whirlpool company at the time that I purchased it (thus the sale price). This was not forementioned at the time of purchase. What a lousy way to do business. Whirlpool screwed me. Shame on me. Never again.

My brand new top-loading, high efficiency washer has squealed like a banshee from day one. Whirlpool replaced the main agitator part, with no success. It still squeals so loud, you cant have a conversation in the same room. Now, Whirlpool says that it is normal. No, it is not normal for a washer to squeal so loud. I am still waiting on Whirlpool to replace the same part they replaced the last time. We are still not abe to hear each other over the squeal of our new Whirlpool washer. This is not normal.

We bought all new Whirlpool Gold appliances for new house. Fridge stopped cooling within 8 months, placed warranty call, couldnt get to us for a couple weeks (this is in July). Was told everyone was having problems...so sent us a brand new fridge...happy!! Little over a year later started having problems with this one and was told no warranty, didnt transfer to new fridge and no one offered to sell us a new one at the time, so repairs were out of our pocket. Had new condenser installed, still no ice, had circuit board installed, got ice but refrigerator section isnt cooling after almost $700 out of pocket...dont waste your money on a Whirlpool. So disappointed.

Bought appliance (Whirlpool French Door Refrigerator Freezer) in 2014. The seal that closes all the brackets with screws and you had to hand guide it to close. Then the freezer got out of alignment and wouldnt close and seal. Ice built up behind drawer which prohibited the opening of freezer drawer. Wouldnt open more than 5 inches on one side and 3 inches on the other. Had service tech out. Cost almost $200. Did not get French doors repaired because the part cost over $125. Less than a year later I have to have a repairman back out for same problem with the freezer door and ice build up. Not happy.

Have had Refrigerator less than two years and the evaporator seal is leaking and all the Freon is gone causing the freezer and ice maker to quit. Will cost $700 to repair. Found out it is a known defect with Whirlpool. Called Whirlpool for reimbursement and they refused, saying they do not know anything about this issue. This is interesting since it is all over the Web with complaints. I have been a customer of Whirlpool for 20 years and they have lost me and everyone else I know.

Whirlpool has electronic controls allowing exact temperature settings. It is an excellent range and it has a storage drawer under the oven for storage of pots and pans. It also has sealed burners so no gunk gets under the burners.

Purchased a Whirlpool refrigerator less than 3 years ago, the inside is cracking in several places. I read someone elses review and they said the same thing happened to their refrigerator. Customer service would not do anything to help me.

Absolute junk. Bought an entire matching set 2 years ago. Fridge, microwave, dishwasher and oven. Oven is the most user unfriendly thing I have ever bought. That’s my fault. Microwave failed. 300 to replace. Ice maker in side by side fridge failed, another 300 dollar fix. I used to have a field mouse or two get into the house every year. Don’t have that problem anymore because the fridge is so loud it scares them off. Talking to Customer service was the most frustrating thing of all. They think if they say your name in a nice soft tone long enough it will make everything ok. Mother and father raved about Whirlpool products. How times have changed. Do yourself a favor and steer clear of these products. Also, look up the other brand names made in the same factory and steer clear of those as well. I used to think appliances were all the same. How wrong I was. Do your research. It will save you a bundle in the long run.

I purchased this machine in February 2019. The standard one-year warranty covered the first service call less than one year later. This call was related to the main control board. If this part goes out it will prevent the washer from advancing through the cycles. A technician was able correct this problem by resetting control board. That was sometime the first year. The next call was for the same problem and it cost me $90 to have a technician reset the board again. I then learned how to do it myself through online research. However, I had to do it more regularly and this got old as you can imagine. I did buy myself about two months of time by purchasing a used part but it soon failed as well. This main control board cost $564 if you get it from the manufacturer. This exceeds the cost of the machine. It was purchased in 2019. (The same machine has gone up to $740 today.) I had no other problems with that appliance however, it appears nowadays with electronics taking over cycles vs. mechanical parts you will not enjoy the same longevity as I did when I got 16 years out of a GE washer before this one. I have replaced this machine with a competitors product that costs less than the part except for the 5-year warranty from Lowes.

It started getting warm and wasnt getting any warmer. Model number ED2VHEXV001 22 cubic feet side by side. I read another review and it sounds just like mine, OMG. It better just need something, its less than three years old. I am not happy and I always bought Whirlpool, my first trouble with it.

We purchased Whirlpool Cabrio Washer WTW5600 series in October of 2010. I bought the machine from Sears and also bought the extended warranty. Less than 6 months after I had been using it, I noticed that all my husband’s shirts were getting sweat stains under the arms and my hand towels were very smelly after drying with them one time. I called Sears to have someone come out and tell us what the problem was. He said I was using too much detergent so I reduced the amount of what I was using. It did not help the problem so I started using the extra rinse each time I washed, still did not fix the problem. I called them out 3 more times in 2011. One tech told me I was still using too much detergent so I reduced down to 1 tablespoon like he suggested. I stopped using softener in my washer because he said I needed to clean my machine more than one time a month, to clean it every 3 weeks. No solution to the problem still. I have had a tech from Sears and one from Whirlpool (who incidentally was the same man, he was from A&E Appliances). When he came in the door, my husband told him he had been here before and I said 2 times. He lied and said he had not been out before. Are we blind? No. He ran the cycle but sat in his truck while he was running it. None of the techs have ever put a tool on the machine to check if the water level is right. They just stand there and tell us to change the amount of detergent or clean the machine with Clorox more often. I cleaned it 8 days in a row and the clothes still smell and still do not get cleaned. We talked to main man at Whirlpool and said they couldnt do anything because their 1 year warranty had run out. We have been using Whirlpool appliances for over 30 years but I will not ever buy another one. I have probably had 5 Whirlpool washers over the years but never had a problem until we got this Cabrio top loader without an agitator. I would not recommend this washer to my worst enemy, if I had one.

I recently had the bake sensor go bad on my Control Panel of our Whirlpool Gold AccuBake Oven with microwave. Not a problem correct? WRONG! While the Whirlpool people were very professional in helping me (a shout out to them), the part I received was the wrong color. It was white; they called it a biscuit color. My oven is black. I have no idea what Whirlpool actually calls that color. Anyway, in my visit with them, I was informed the black control panel has been discontinued. Am I the only person that has a black control panel? This $280.00 part is now going to cost approximately $3,000.00 to replace the entire unit. Is there anyone that can direct me to where I can find a black replacement control panel? Way to take care of your customers Whirlpool. Solve this and I will give you a great shout out.

Regarding a Whirlpool Refrigerator (model ET8CHMXKQ04) purchased in 05. I dont remember exactly when the problem began but the freezer starts its defrost cycle, water drips down through the refrigerator compartment (soaking all paper/cardboard covered products), collects under the crisper trays and eventually spills out onto the floor. Its a river of water that requires a towel to collect.I believe whats missing is some sort of collection funnel and tube that catches this dripping water and delivers it to the evaporation tray behind the base cover plate under the refrigerator. Obviously, Whirlpool has no quality control nor does it do any field tests to ensure their products are designed and operate properly.

Purchased a Whirlpool french door refrigerator at Lowes less than two years ago. Last week the freezer compartment failed, out of the one-year warranty of course. The independent tech who came to service the machine told me of all the refrigerators he services Whirlpools are the closest to total junk and he would never recommend them. Wish I knew him before I bought this soon to be piece of trash. The CEO of Whirlpool, Jeff Fettig, received total compensation valued at $14.4 million in 2010, up about 15% from a year earlier, the appliance maker reported in a securities filing recently. Appears to me that Mr. Fettig is ripping off customers for his own gain, with his boards approval. Shame on all of them -- another example corporate rip offs that are plaguing our nation.

Help? WP Gold double convection wall ovens WOD93EC0AS rated very high by Consumer Reports installed end of February. Monday April 6, fan in top convection oven came on suddenly while oven not on. When I tried setting a baking temperature in top oven to see what was going on, message read This function is not available. After about 15 minutes the fan went off, and I could use the oven. Worked well Tuesday and Wednesday. Oven not used again this week, but this evening, Friday, same thing happened again. Process has been repeated several times with fewer times between fan turn on. Have turned off power to ovens until I can get a repairman. Has anyone else had this experience or know what the problem is. Have been reading about the problems with WP ovens. Wondering if I need in addition to Home Depot Warranty the one from Whirlpool as well. Had Bosch convection ovens for 12 years then self-cleaned and thermostats went out and cannot be replaced because parts no longer made or available through any supplier. Said I would not buy Bosch ovens again because the parts became unavailable even sooner. What a mistake. Apparently self-cleaning element blows a lot of ovens thermostats and/or circuit boards. Loved the ovens and had only one repair after the ovens were one or two years old. The Bosch dishwasher is same age and still working great and usually cant even tell it is on.

I have the model FG1H5040T3NOV water heater and had found this message board. I called the number posted by Chris with American Water Heater and provided them with my serial number. They shipped me the replacement assembly next day and after about an hour, I had it installed and working again. Im not too happy with the fact that it failed, but it does appear they have their act together in getting the replacement parts distributed.Based on the discussion with the person on the phone, my only real gripe is this: the cause of the component failure was potentially caused by a dirty-flame trap that supposedly needs to be cleaned regularly. Since the trap is underneath the water heater and is in no way really accessible, relying on people to see the fine print in the manual (which hardly anyone reads) isnt sufficient. At an absolute minimum, a very clear and apparent sticker should be included on all water heaters indicating this needs to be cleaned and a clear description of how to clean it properly to prevent this sort of unnecessary headache in the future.

Bought a Whirlpool 25 cu ft side by side in 2011 and now just 4 years later the compressor is bad. Called them and they only have a 1 year warranty, which is nothing for a compressor. They told me for $350 they could replace it and it be good for only a year. Not going to sink more money into a product even the company has no confidence in. The repairman advised to stay away from Whirlpool as they were not the company they used to be. Also the salesman at Lowes where it came from said they used to have a 5 year warranty but changed several years ago and the quality also went down. We have had refrigerators last 25 to 30 years in the past but no more thanks to modern technology. Thanks a lot. STAY AWAY FROM WHIRLPOOL!

I have had my water heater for 5 years and the repair is going to be close to $300.00! Whirlpool offered to send me the part and if I want hot water tomorrow I can pay $30.00 for shipping! $10.00 for standard ground! My other water heater was builder grade and lasted 12 years! Go figure.

I am very sorry I bought this machine. CU rated it pretty good. Nope. 1 - It rarely dries everything completely. e.g., the collars of t-shirts or turtleneck shirts are damp after the load is finished. I have to run the machine again....Energy efficient? Energy schmefficient. and I havent even TRIED to use the low heat delicate cycle. 2 - The cute modern buttons are hard to push in. 3 - The top of the machine doesnt have a level lid... Its curved. Not very useful for setting anything on while you work at any part of your laundering process.

I Purchased 9 year warranty, Whirlpool water heater and installed it. Started having problems in the first month. It started giving a water temp too high error code, yet water was barely warm. Called Whirlpool. They had me do a bunch of diagnostic checks. Determined it was a bad control module. Sent me a new one. I installed it. Within a week or two, same problem. Called Whirlpool. This time they sent a Tech out. Everything on water heater tested normal, nothing wrong with any part. The tech finally, found a TSB that indicated that you couldnt have any re-circulating valves or systems connected to the water heater. We had one to keep hot water at the taps. So I removed the re-circulating kit and water heater worked for a few months. Then same problems, it keeps going into error. Error code indicates water temp too high, but water is barely warm to cold. Call whirlpool several times, they send out another control module and heating elements and I replace them. All work temporarily. Finally replace control module again, and it works for several months. Then back to error codes. Not always the same code. Sometimes it is water temp too high, other times it is check one of the heating elements. We have lived with it like that for about 3 years. We get hot water by resetting the water heater several times a day. Well, about 3 months ago it started tripping the circuit breaker in the electrical panel. I called Whirlpool and explained what has been going on since I bought their piece of junk. They will not do anything unless I call and pay for a service tech to come diagnose and repair the problem. They will provide the parts for the repair. I am not a certified appliance repairman, but I do handy man repair work for a living and do appliance repairs quite regularly. I am capable of doing every test that the repairman will do, but Whirlpool insists that I pay to get their defective product repaired. Then if I have problems again in a couple of months, I will have to pay a service tech again. I have friend that had this same water heater. I replaced the control module on his once. I was telling him about my woes and he told me he got fed up with all the problems and ate the cost and got a new water heater, not a Whirlpool. I am going to call Whirlpool one more time and then I am sure I am going to do what my friend did and put the money I would spend on a service tech into a new water heater. It will not be a Whirlfool.

I love the brand. I just do not care for the lock lid on all the new washers. I could do without it. I do not have kids to worry about getting hurt. Im looking into finding a brand without a lock lid. I just replaced one before this one. For the lid breaking.

I have a Whirlpool french door unit with ice & water through the freezer door. I recently noticed rust in the ice. When the extended service plans tech came to see it he told me that the ice bucket would have to be ordered. Almost a month later, I called him and was told that rust isnt covered. I understand that surface or cosmetic rust shouldnt be covered, but rust in a place where it can be ingested is different. Anyway, I called Whirlpool directly and a very nice phone rep agreed with me and asked her supervisor. Needless to say, I just sent Whirlpool a letter stating that I would pursue this through legal channels if I dont get satisfaction.

1.0 out of 5. This is the absolute worst washer that I have ever owned. Do NOT fall for the top loader hype. The clothes do not get clean. Anything black constantly comes out with a white residue and whites are dingy. Ive tried numerous detergents and used as little as a tablespoon and still get the same results. The company just insists that its too much detergent or that I need to run the clean cycle after every 4-5 loads. The service guy that came out said this is the number 1 complaint with these washers and Ive talked to plenty of friends that experience the same issue. The company would have you think this is the first time they have heard of it.I have spent hours on the phone with whirlpool and Home Depot over the past year and neither accept responsibility or offer any solution other than some free cleaning tablets from Whirlpool and Home Depot offered $200 off the purchase of another washer. This was when the washer was only 6 months old. The only way around this is to rewash the clothes and a second cycle and to wash all loads on bulk load with an extra rinse. Yep. Great water savings there! Save yourself the headache and dont buy a top loader of any brand and I would never buy another appliance of any kind from Whirlpool and Home Depot because of their poor customer service in handling this common issue.

I purchased a matching set Whirlpool Cabrio top load washer and dryer in 2007. Bought from Conns for $2,100. After 3 months of ownership, the circuit board had to be replaced on the washer. Three months later the heating element was replaced on the dryer. Just recently I spent $350.00 to replace 4 drum suspensions. The washer literally shook my home. 3 weeks later, the circuit board needs replacement (code F1). Estimate to repair - $325.00. The dryer is not working properly. Im having to run the clothing thru 2 cycles. Back to the washer. It shreds my towels. Ive read where other consumers have had this same problem. These are expensive towels. So, only 7 yrs. into ownership and I am replacing this junk with the old school washer/dryer. Unlike the Cabrio washer, I will have a washer with an agitator that will actually clean my clothing. Whirlpool manufactures trash and the Cabrio duo was the worse purchase I have ever made. Do not purchase Whirlpool and definitely do not purchase Cabrio.

We bought a Whirlpool refrigerator, model ED5LVAXWSOO. Although we didnt need or want the ice/cold water dispenser, we bought the model anyway. We have never hooked up nor used the ice maker/water dispenser. As the refrigerator was powering up upon its initial start-up after delivery, we found that condensation was leaking from the ice maker on the door. Upon closer inspection, we found that the hatch cover was not sealed and actually jiggled around when the door was opened or closed. A service man came, had difficulty with the issue, but eventually said he fixed it. It didnt leak again for almost three years. Then the exact same problem. (Remember, the component is still neither hooked up nor used.) Apparently, the opening and closing of the doors eventually caused the same defect to reappear. Of course, since the warranty has expired, Whirlpool sees no obligation on their part. But the value of a product is not based on a limited-time warranty, but on how the product holds up. This has to be a manufacturing or design defect as it came from the factory broken, and eventually the same problem re-appeared even though there was no wear and tear on the component, as it is not used. These products are much too expensive to begin failing after a few years. I would caution buyers based on the product being delivered broken (wheres their quality control?), its lack of durability even when not being used, and the Companys disavowal of any responsibility beyond the limited warranty period, even though it is a recurrence of the original problem (which to me means that it wasnt properly repaired/corrected during the service visit). Whirlpool eagerly grabbed our hard-earned money, but delivered an inferior product made worse, in turn, by its sub-standard service and lack of accountability.

4 year old gas range, used self clean mode yesterday, for first time, upon completion opened oven door, not very clean and found 1/2 moon shaped raised crack in center of oven floor. Customer service insisting repair tech must come at cost of $60.00 to determine cause. I believe this is manufacturing defect, that they are not willing to admit. Offered big discount on new range. NO MORE WHIRLPOOL FOR ME!!!

My 5-year-old Cabrio started coming up with error codes, and not draining and spinning the clothes. I called a week ago, they offered me 2 options, one being put $339 on a credit card and that would cover all parts, labor, and a 1 year extended warranty. They charged the credit card immediately for the biggest piece of crap washing machine. Someone came out 2 days later and told me he has worked on a lot of Cabrios but never one in quite that condition. I was led to believe that after charging the credit card, boxes would be arriving with parts to fix it. I called 2 days later to find out the status of when it would be repaired and they told me they already put a credit thru on the credit card because to fix it would be equal to the price of 2 brand new washing machines, and they will do nothing to honor that agreement. So I now have a piece of ** in my laundry room and takes me two days to do a load of laundry. DO NOT BUY THE CABRIO! In fact Im not going with a Whirlpool ever again!

Our first Whirlpool washer barely lasted 1 1/2 years. They replaced it with another one that broke within 9 months. When it worked, it was great... When it didnt, it either overflowed or did not wring clothes tightly on the second rinse.

I purchased a top load Whirlpool washer from Lowes 2-8-12. It got so it wouldnt rinse. When it came to that cycle, it just skipped it and went directly to spin. I dont know how long it was doing this before I caught it. A repairman came out said I would need the equivalent of a motherboard that would cost $330.00. Needless to say, couldnt afford that amount for repair. So I purchased a very nice used Amana for $100.00. I always thought Whirlpool was a top of the line product. This has changed my mind. If it wont last any longer than 5 years I dont want it. There are just the two of us and we are retired so the machine was not overused. I am so disappointed and angry about this.

I purchased this WRX988SIBM01 refrigerator new at Lowes 23 months ago. The freezer evaporator failed with estimated repair costs of $600 on a unit that cost $2400. The authorized repair person indicated that the failed part was a recalled item on the three door models. Mine is the four door model but has the same evap model. When contacting Whirlpool about covering some of this cost, they denied the issue and offered no assistance. This was after hours spent trying to get through. They do not return phone calls. I will never purchased another Whirlpool or related company product again. The quality is subpar and I hope my post prevents others from buying their shoddy products. Made in America doesnt mean what it used to.

I purchased a Fridge/Freezer just over 4 years ago. It was an expensive one. The gas is gone and they cannot re-gas it. If I was told this when I was purchasing it I certainly would not have spent this money. I rang the concessional team. They would give me nothing towards a replacement as they had not one in stock, POOR Service for a big company. I am in business and this is not the way I would treat my customers. This has certainly turned me away from purchasing Whirlpool Products, despite having a industrial washing machine and Dryer. For the record, I had 2 servicemen to check it and they were most pleasant. It was beyond repair.

We bought the Whirlpool Cabrio forcibly when our 20-year-old top load whirlpool finally gave out. The Cabrio sucks. It does not get anything clean, it ruins clothes due to low water which creates friction, clothes are left wrinkly, smelly, pilled with lint, stinky and unclean. Ive had it for a year and Ive given every cycle a chance. It simply does not do what it is supposed to.The HE washers are supposed to reduce water, but having to rewash everything several times with load times up to two hours not only increases the amount of water used but increases the amount of energy used. Our electric bill has gone up $30-55 a month on average. This doesnt even account for the fact that Im spending nearly 16 hours a week doing laundry for a household of five. Thats nearly triple the time I used to spend on laundry. From having to pretreat even the most minor stains to spending hours trying to get the wrinkles out, and having to remove pills of lint, to the fact that one wash cycle does not get the odors out nor the dirt out therefore multiple cycles are required. I honestly think I might spend less time if I hand wash everything, I certainly would get them clean and deodorized. UNFORTUNATELY Government regulations force the consumers to buy HE washers so our choices for clean deodorized clothes are non existent. If I had to do it again I would buy a used non-HE washer knowing it would run another 10 years and actually get my clothes clean.

Whirlpool Microwave oven (Model # WMH1163XVS) handle cracked and Whirlpool told me the damage is cosmetic and they wont cover it. The microwave is only 7 months old and I am very easy on appliances! This is faulty workmanship and defective!

Have had it replaced. It is not a great value. Need one with freezer on the bottom. Will buy another brand. Not 2 years old making noise and it sounds like someone pounding on the side after the doors are open. This is a side by side fridge and has space but I question when this will go out.

They sold me a washer that did not work. First load failed and the machine locked closed. Error E1 F9. Took 7 days for technicians to open the machine. The laundry was rancid by then. Needed a new drain pump motor, which was installed 37 days later. Whirlpool offered $150 for my loss of clothing. Ridiculous. Value $900, I asked for $500. Awful.

My family purchased a Whirlpool stainless steel dishwasher at Lowes for around $500. We were replacing a very old GE dishwasher which was so loud you had to leave the room anytime you started it because you couldnt even talk over it. We love the new Whirlpool dishwasher. It is so quiet we thought it was broken at first because we couldnt hear it running and even though it cleans exceptionally well we still sometimes have to look to see that the light is on to know that its actually running. The whole family agrees this may be one of the best purchases weve ever made. The only con I could think of is my son and I put the dishwasher in ourselves and this is the first one weve ever done and the instructions werent as clear so we had to redo the piping of the waterlines a couple of times to figure out in what order to be done. But everything hooked up correctly and worked immediately without a problem. Couldnt be happier.

Purchased a new Twin Thin washer & dryer combo when I first moved into my new apartment two-years ago since it was a good fit for the space that lies inside my patio. Nothing BUT problems from day one since it DESTROYS/EATS your delicate clothing. Repairmen in and out could find nothing wrong with it. The problem lies in the fact that the so-called gentle cycle agitates at the same rate as the other cycles, but stops so that the agitation time is shorter, but at the same time the agitation no matter if its shorter is still too vigorous for delicates. Under contract, so keep having repairmen come at no cost to me other than a complete waste of money purchase inclusive of unwearable brand new RUINED clothing.Called the company the other day & was told they could SELL me a different one, but they would probably not pay to have the LEMON removed. Also, suggested I wash my delicates in a mesh bag which is impossible to do when one has maxi dresses that tell you to wash on the delicate cycle. Mesh bags are made for small items - DUH!Repairman came again today, and was kind enough to make call to them. Later found that their response to him was that I was putting too much into the washer. Like no way, Jose! Asked tech to forward e-mail to them advising that they were more than welcome to come film me when I wash because that was NOT the problem with it. Already knew Whirlpool had discontinued this washer/dryer combo, but THAT fact was never mentioned. A lot of sites online no longer even carry the parts for it. Found others with the same issues on various sites relating to this now discontinued model which is akin to a Purana fish with shark fins. E-mail sent to tech that was here today asking him to forward my e-mail to whomever he made contact with today via phone that unless the situation is remedied that I would have to take further action. Now awaiting response from the main man tech or whatever his position is at Whirlpool.Bottom line is that it is a LEMON that has not only cost me money, but excessive amount of time to resolve this issue not to mention time spent online researching this, that and the other concerning this discontinued appliance. Warning to all out there - DO NOT BUY WHIRLPOOL - UNLESS YOU WANT A HASSLE and a lot of BS. Found they already have an extreme number of lawsuits against them during my online searches. So, ball is in their court at the present time. Will be calling them the end of the week once again in order to get this problem resolved unless I hear from them via e-mail.Totally exhausted from it all. Word to the wise: DO NOT waste your money on Whirlpool appliances unless you want more problems than you already have. I have health problems which are exacerbated by stress, and believe me this has been one of the most stressful and one of the longest things to resolve (two years) brought on by their lack of admittance that this DISCONTINUED product is a real LEMON. BUYER BEWARE OF WHIRLPOOL - I rest my case.Updated on 07/12/2018: Cant seem to find this model anywhere now. Not to mention the fact that I found it not only eats my delicate clothing, but is also ruining my towels, etc. and I use the regular wash cycle for these items. You cant find my model #WET4024EWO anywhere; looked like they put a similar one out with a slightly different model # in which the drum/agitator differs from mine. Now find Im having difficulty finding that NEW stackable model on the WEB. Leaves me wondering if that one has also now been discontinued???They have given me no resolution to my problem as of yet, and Im totally EXHAUSTED from it all. Have high blood pressure, a heart condition, and cant even sleep right anymore due to their lack of cooperation to solve this on-going problem which is certainly not helping any of my medical conditions either. Its causing nothing but STRESS, STRESS, STRESS and more STRESS! Will be filing a complaint with The Better Business Bureau by next week if not resolved by this weekend (if I live that long).Updated on 07/17/2018: In looking at this Washer/Dryer Combo Model # WET4024EW aka LEMON again today after noticing more clothes which now have holes in them after being washed on the gentle cycle with the highest water level possible, I noted the size of the agitator. Bottom line on this is that the agitator also appears TOO LARGE for the machine which also could also be another contributory factor to the destruction capabilities of this now discontinued model. Also, inspected towels today and found torn stitching & thread tearing in those also; appears EVERYTHING you wash in this machine gets destroyed. In researching further on their newer makes noticed that the agitator appears either much smaller or has been removed altogether. Hopefully this will serve to aid anyone out there who is thinking of buying this machine second hand from anyone out there that is attempting to sell it vs obtaining restitution from Whirlpool.

We bought this refrigerator because it was the only panel ready one we could find. When it was delivered the two doors did not line up. There was an adjustment that could be made but it required that Whirlpool had to do it. We made an appointment and was told it would cost $179 for the adjustment!! This for a refrigerator we had just purchased for several thousand dollars. The service person showed up and after working on the refrigerator he could not balance the doors. He blamed it on uneven floor, misaligned cabinets – anything he could say to shift the blame from Whirlpool. We called and complained again. They sent out another service person. He was just as useless as the first one. Told us to even out the doors we would need to shim the refrigerator which he would not do. Complained to Whirlpool with no results. Finally hired someone not affiliated with Whirlpool who was able to get the doors to be aligned. Never Never buy a Whirlpool/Kitchen Aid Appliance. They do not stand behind their products and do not care about their customers!!

I purchased a Whirlpool water heater about 9 months ago. The thermocouple went out and was replaced, but about three to four months went out again. Very disgusting.

I had this stove for less than 3 months and the glass top broke after turning on the stove. Now I tried to find out how to purchase a replacement but it cost as much as a new stove....Ughhhh this is so aggravating.

Purchased a Gold Series Whirlpool dishwasher, Mo. No. WDT720PADW2, From Maruszcak in Schererville, In. on 1-29-16. Approximately a year later door was replaced by Whirlpool because of paint problem due to faulty design. Replaced door is now peeling and rusting by exhaust vent also. Contacted Whirlpool and they will do nothing more. They said it was a favor the first time they replaced the door. They feel this is a cosmetic problem! I paid a total of $675.03, Their repairman would charge a $100.00 to look at it and another $235.00 for a new door. I feel this is a design problem and they should replace it with a new model, a refund would be better. Very unlikey, because Whirlpool does not stand behind their products. The line also includes Maytag, Jenn-Air, Amana and Hot Point. Besides this I have found plastic pieces that have fallen off! I had to use plastic ties to keep them in place. Dishwasher does not clean well. Have to rinse everything first. Products are bad, stay away from them!

Our 4 year old Cabrio top loading washer failed. Apparently there is an engineering design issue with the pump and tub assembly causing the machine to not complete its spin cycle. These items will typically fail between two to four years of operation. We paid $1,000 for what we thought was a high end machine from Whirlpool. After having a local repair company diagnose the issue, we were told by Whirlpool we must use their authorized service companies. After 6 weeks of waiting for service, parts and several trips to the laundromat, we had the repairs completed by Whirlpools authorized service provider. Within one week, our machine failed again, called Whirlpool and they said will not help us. DO NOT BUY WHIRLPOOL PRODUCTS!!!

I have a Cabrio washing machine and the circuit board has gone bad. I understand from Whirlpools customer service that if your machine was made before 2005, they are fixing the issue. Mine was made after 2006. Even though the problem is the same, Whirlpool will not correct the problem. I was told it was fixed in the new machines. The circuit board goes bad and you have to start and stop the machine at least three times before it will start your cycle, then it stops again at the 17 minute mark and you have to cancel and start the machine again for it to finish its cycle. The error is F1. Customer service acknowledged that this is a known problem for the Whirlpool machines built before 2005 but deny any claim that is is happening to the machines after 2005. Looking at all the other complaints, it is still a problem. I am disappointed in Whirlpool for their customer service attitude and for them not standing behind their product and fixing a known problem. I have always bought Whirlpool products but going forward will be switching to a better company. Shame on you Whirlpool. For a machine I spent $1000 on, the part is going to cost $300 to fix.

This is an EXTREMELY dangerous range. The burner knobs leak - turn on with just a bump and leak gas. Any slight movement causes the knob to move and allows the gas to leak before the igniter ignites the gas. Has happened THREE times!!!! Has this product been recalled???

We bought a side by side refrigerator/freezer in 2013 from our local Best Buy. We have usually bought Whirlpool appliances. Before we bought this refrigerator the last Whirlpool we had for 25 years. This past week our refrigerator went out. We called a repair man. He said the circuit board was out and would cost $450.00 to replace it. We decided to buy a new one. I am very disappointed that it only lasted 7 years. Oh I forgot to mention the ice maker went out about a year ago. We did get new filters as instructed. We did not buy another Whirlpool.

I purchased an electric double oven range on 11/20/11, model # GGE388XS00 and serial # D02584385. Something is getting in between the glass on the bottom oven door and theres no way for me to clean it out. I feel it is an issue with the seals they have around the glass oven doors.Whirlpool says its common for that to happen. They say its condensation. But it doesnt look like condensation to me. Whirlpool says theres nothing they can do about it.I had this same issue with a Whirlpool microwave oven I had. I finally ditched the microwave and bought a new one, because after a while, it starts looking really nasty. I never complained about the microwave, but after buying a new oven and it starting to do the same thing, I thought Id better complain and see what they would do about it. Theyre not doing anything about it.

We purchased 2 Whirlpool Cabrio washing machines in 2011. Both required service calls in June 2015. After 3.5 years, the repair company diagnosed that the Whirlpool Cabrio model number WTW7800XW2 bearing needed to be replaced for an estimated $650.00 and recommended that we purchase a new machine. The other machine was spewing water out of the side of the machine. The repair person took the machine apart and could not duplicate the problem.

I also have a side-by-side Whirlpool Gold Fridge purchased from Lowes Retail Store, and I paid $1,480.00 for it. It is now 4 years old and I just noticed large cracks on right, inside part of the fridge. I called Whirlpool and got a runaround. Some lame guy said, Sorry, nothing we can do for you.When are people going to stand up for their rights and fight for their bucks? They havent heard the last of me but I will put this on the back of my truck with a nice sign on it for thousands to see. If anyone else has had this problem email me at ** and lets talk. I will never buy any Whirlpool items ever, ever again! Buyers beware! I also hold Lowes Retail Store responsible for this. They should research and stand behind what they sell, they are no better than Whirlpool!

I bought a new Whirlpool Top Load Washer four years ago and the paint was peeling off. I called Whirlpool and they offered to sell me a touch-up paint because it was out of warranty. I will never buy one of their products again.

My Whirlpool stove and oven have been absolutely wonderful. My Appliance is 18 years old and Ive never had a problem with it since the day I bought it. I recommend Whirlpool appliances for the whole house.

Whirlpool Cabrio Model WTW6500 - I ask all of you to stay away from the Whirlpool Cabrio sets. I have spent hundreds of dollars trying to fix my washer. I just spent $260 for a computer board. Now it stays on rinse cycle. So now I need the motor sensor harness which is another $90. Service call $80 x 2. So, now I am going to take the computer board back and get my 260 dollars back. For the cost of $400 to fix this washer. You can go and buy a new one for around $400. Then, Im going to the lawyers to file a class action suit against Whirlpool. So, owners; be looking in your mailboxes for a class action suit against Whirlpool for those who own the cabrio set. Im tired of having to deal with whirlpool customer service. Maybe, whirlpool should think of having their laundry made back in America.

Purchased water heater in 2005 with a lifetime warranty. We had our first problem May 30, 2013. Water would not heat above lukewarm. Called Whirlpool. Our plumber and Whirlpool determined that the temp sensor was defective. Plumber took it off and it appeared it had shorted out as the wires were black and plastic coating had slightly melted in one spot. We had replacement part in 24 hours. Licensed Plumber did repair (2 hours @ $75/hr = $150). Second problem occurred October 23, 2013. Not even 5 months later! No hot water. Hit reset button, turned temp up. No change. The diagnostic light on water heater indicated it was the same problem as before. Called Whirlpool. They sent out repair part which arrived in 24 hours. Licensed Plumber repaired (1.5 hours @ $75/hour = $112.50).I took a picture of the melted plastic caps where the wires screw into, of the housing around the wires, of the melted, charcoal crispy black of the Junction Box in the area that was directly above and covered the wires and sensor panel. It was much worse than last time. Plumber said that the part that screwed into the plastic cap had to be pried out and it broke off. You could see that this might be the spot where the problem started. We feel fortunate that we didnt have an electrical fire start from this problem. Something isnt right. Within less than 5 months, we have spent $262.50 to repair a water heater that has a lifetime warranty. Id like to give this 0 stars. Whirlpool owes us $262.50 and it might be more before this is all said and done.

Me and my wife bought a Whirlpool top load washer June 2011. Two months later the motor locked up and they repaired it; then the transmission started whining the next month. It was repaired. Now a bearing is going out all in the first seven months of ownership and they will not exchange washers, they just want to keep fixing this one until the warranty runs out. Whirlpool washers are a piece of junk and I will tell everybody not to buy anything Whirlpool.

I bought the most deluxe and expensive washer and dryer I have ever owned. It is a Whirlpool Cabrio. The clothes come out of the washer dry, and all tangled up. I bought it new from Sears on July 2009. Now only two years old, and the washer sounds like a jet plane. I paid a repairman $90.00 only to be told this is common in this machine. The repair is expensive, and I would be better off buying a new one! I owned a cheap, little GE washer, which cost me $300; ten years, and never had a problem. Now my dream machine turned out to be a piece of crap. I will never buy a Whirlpool again!

I purchased a Whirlpool hot water heater 2010 and it started having problems 2014. I called customer service. They informed me my 6 year warranty was only for parts and I had to pay for a certified repairman to come and do diagnostic tests and they will pay for parts only. I said the repairman is half the price as the hot water heater and then he has to come install it. Woman on the phone was just as ready to get off the phone as I was! Save yourself and just buy a new one NOT WHIRLPOOL!!!!!!

I have had no issues with my washing machine. Love the different settings. Washes clothes well. Dryer has minor issues like the drying dial stopped moving so I need to manually turn it off. It’s more of an inconvenience, but for the price it should work.

Worst customer service I have ever seen. I have been waiting on a part for my dishwasher since before Thanksgiving. I have sat on hold for 2 or more hours. They cannot connect you to a supervisor, you just continue to wait on hold. They cannot give an eta for the part that has supposedly been in production since before Thanksgiving. I get told one thing, then when I call back for an update 2 weeks later that person has no idea what Im talking about. I will tell you one thing, if you do not want a headache, I suggest you buy another product!! I can guarantee, I will let everyone I know and never purchase Whirlpool again if this is not resolved this week! After doing my research, this part should be recalled. It is a big issue with this very expensive dishwasher.

I wrote down names, but I will not say them here. I found many recall sites on Whirlpool Cabrio WTW6200vwo for washer tub bearings. Which mine are bad. I called and logged my complaint but they say they have NO recall on any of their products and will send someone out but will charge me a service call unwarranted and parts if needed. I told them there are many websites that recall their tub bearings but they refused to fix the problem on recall. I dont have photos due to bearings are under the tub.

Bought set 12/5/14 at Lowes Tucson. First load came out with shirts looking like theyd been scrubbed with sandpaper. Called Whirlpool & was advised to use higher water level for loads. Then noticed small hole in my favorite shirt. Oh well. Next I found an area in my king sized bottom sheet with several holes and torn fibers. Thought maybe it might be from my toenails, except it wasnt where my feet would be. Finally a pair of capris (just worn twice) found with same type of holes and torn fibers. Dryer also inefficient. Balls up clothes - outside dry; inside wet. Re-run one or two inside wet pieces and they dont dry at all! What kind of technology is this?

I rent a condo unit and hardly use the microwave. It is nice to have. Never had one over the stove and it came with the unit, so I gave mine away. After living here for 3 years I am now moving to another city 5 hours away. I noticed the other day when I went to melt butter for popcorn, the door crack, which I noticed the second year we lived here, has gotten worse. Not just worse, but the handle looks like one pull and its completely broken. My landlord expects us to pay for this. I am reading and I see that its from the heat from the stove, which is also a Whirlpool product, is to blame, not the user. How is this right, how is this fair?? When we move we will have to buy a new microwave, that will sit once again on my beautiful microwave cabinet and I promise, it WILL NOT be a Whirlpool!!!

I bought my Whirlpool dishwasher, model #WDF560SAFMO in Nov 2016 with a 2 year extended warranty. In Jan. 2021 it quit working, was told by repairman that the dishwasher needed a new pump. Of course, it is no longer under warranty. To replace the pump will cost almost as much as a new dishwasher.

I love my washer and dryer. The only problem I had over the past five years since I bought them was when the motherboard went out on the dryer. Luckily I had insurance, so was able to have it replaced. The features on the machines and their ability to clean really well have made my life much easier when it comes to doing laundry!

I have a Whirlpool Cabrio washer (Model: wtw6400sw2 / Serial Number: cu0271913) and I am very disappointed with it. The spin cycle is the worst--sounds like a jet engine and gives me the UL error message of unbalance load. The machine was purchased in 2007 but was kept indoors. I contacted customer service and they advised me to contact the repair service in my area to get a diagnostic analysis of the issue. Hello! I already know what the problem is after reading all these reviews! I cannot tell you how pissed off I am. I will never purchase anything Whirlpool and I will contact BBB as soon as possible. Come on, fellow complainants, let us continue to fight to get a possible recall soon! We all have the same problem because this is a manufacturing defect!

I purchased a (second) Whirlpool washer (WFW87HEDW0) in October 2014. Since purchasing (and to this day), I manually dried the rubber gasket after completing my daily washes, knowing that mold growth was possible. I wash one to two loads of clothes about three to four days per week. During the first year, I did not notice any mold in this area and was confident that the manual drying and cleaning with Affresh was preventing mold growth. However, at the beginning of this year I discovered a little mold growth, which has slowly been increasing, in the inside lower lip of the rubber gasket. The image attached reflects mold in its current state. I was very surprise to see this happening since my diligent cleaning has been thorough and never ending. I even remove the soap dispenser tray to clean and air dry it outside of the washer and leave the washer door open at the end of the daily washes for extra fresh air circulation. This is my first official complaint about a Whirlpool front loader washer, even though I previously owned another (GHW9200LQ0) before this one and had mold growing on the rubber door gasket but, unfortunately, never officially complained about that old machine. Now, I dont qualify for the $500 compensation because I never officially complained three times within the first five years of owning the old washer. To my dismay, I did not immediately realize I had mold growth in the old washer. It was only until years later that a repairman told me that I had mold growth in it. In addition to telling me the price of replacing the rubber part and replacing a broken water pump plus labor would cost as much as buying a new washer. Before purchasing a new washer, I researched and read many reviews about Whirlpool and other brands before deciding on this new Whirlpool. I decided to give Whirlpool another chance and to follow their recommendations on the proper cleaning of the machine. Once again, I am disappointed and angry with Whirlpool and, now, have to figure out what to do with my current situation.

My new washer is very inefficient. Clothes do not come clean and come out very wet. The cold water only rinse is not an environmental feature... clothes come out so wrinkled that instead of hanging them to dry as I used to (after shaking out the few wrinkles from a warm water rinse in the old washer) I now have use the dryer. This makes no sense to me... I wish I had spent half of the price of this new washer and had the old one repaired... at least then my clothes would come out clean.

We had to have a sensor switch installed. We purchased this washer, plus the matching dryer June 10, 2010. This was just 16 months ago today.The cost of this repair was $160.24, for part labor and service call. The service call was excellent. Wish I could say the same for washer.We had previously owned a KitchenAid washer for over 20 years (before purchasing Whirlpool washer) and did not have to have one repair on it. Very doubtful I will purchase another Whirlpool.Looks like quality is a thing of the past.

Purchased side-by-side model fridge, and within a month, the ice-maker froze up. Within a year, the relay switch failed, and caused the compressor to fail. What a lemon. Also, the clear bins in the door of the fridge side, have all cracked. Whirlpool says it is a cosmetic issue, but I think it is hazard and a material processing failure during their manufacturing process. They obviously would not cover any cosmetic issues under the warranty.I was one of the lucky ones, at this point, as the repairs were under warranty (expensive compressor, only by one week), had to buy an extended warranty to cover me in the future. I was only out the cost of extended warranty, and a fridge full of food. Lucky me. Customer service is worthless for any issues. I dont think Ill buy another Whirlpool product again. Buyers beware.