Whirlpool gold series bottom freezer unit - We have had numerous problems with this refrigerator. We have had several repairs done on it and have still not solved the problem. The defroster does not work right and we have to unplug it so it will unthaw, then the refrigerator gets cold again. The freezer when it is acting up freezes food and ice cream so hard it is inedible. We have just purchased a different refrigerator. This Whirlpool model has also been discontinued from what I can find. No doubt because of a design flaw. Why are they not responsible for this? We bought this appliance in good faith.

After owning the Cabrio washing machine (WTW5700XW, purchase price $629) for approximately 18 months, it began stalling at the spin cycle, leaving the clothes sopping wet. We found we had to unplug the machine to reboot the computer, and then we were able to manually choose the drain and spin cycle to complete the cycle. Before beginning a new wash cycle, we have to unplug to reboot again, or it sticks in a perpetual pump cycle.I scheduled a repair appointment from the Whirlpool automated service system. The repair man determined the computer control panel has to be replaced. Diagnostic service call was $136, repair est, $321.67, repair service call, $60-130. Total repair cost on an 18-month old machine was $520+. I declined the repair in hope of getting extended warranty coverage from Whirlpool. Nobody has responded to my email complaint from one week ago, not even a computer acknowledgment of receipt of my email.

Purchased Whirlpool Cabrio model WTW6400SW washer and dryer 1/7/2007. The matching dryer was dead on arrival and the second dryer motor died within a year. Washer: 1year 2 month the washer motor died. Whirlpool paid for the part and I paid the labor. The following year, the bearing went out and the outer tub was replaced (the bearing is inside the plastic outer tub - bad design. Whirlpool paid for the part and I paid the labor. Feb. 2011 had one of the F errors. Whirlpool repair tech came out as the tub would not drain and it was a wire that had come loose underneath washer - another service call charge. Dec. 20, 2011, I had an error F50. The Whirlpool repair tech came out, verified no clothes or money stuck in the machine. All clear. He called higher level whirlpool tech and they paid parts and labor to replace the main control board and the RPS Sensor. Im single and am not abusing this machine. Like everyone else who posted. I paid close to $1,000 for this washer (not including the dryer) and I have been a faithful Whirlpool customer for 3 generations, but if Whirlpool doesnt offer some kind of compensation/trade in credit to customers who purchased this (knowing that the design is bad/faulty) washer and discontinue this model. This will be my last Whirlpool. I will have lost all faith in Whirlpool. The Whirlpool service tech that I found is op notch. I will miss him if I have to switch brands. Im putting 1 star as I know this machine will not be operational for 9 years which is the minimum that I would expect. If it makes it to 6 years without another service call, it will be a miracle.

I bought a Whirlpool Gold Series Microwave, model # WMH76718AW, on 2/19/13. It stopped working 1/25/15. It doesnt heat food anymore. I also have a whirlpool dishwasher that doesnt clean dishes. Whirlpool products are junk. Whirlpool customer service is awful. The cost of fixing this lemon and then buying an extended warranty for the repair (which they recommend) will make this a $1000 piece of garbage. They dont stand behind their defective products. Ill never buy another one again.

I havent had my Whirlpool Cabrio washer for even 5 years and I have had to replace the glass lid and now the tub bearings need to be replaced... I have read countless complaints for the same issue. I feel like Whirlpool should at least send out free replacement bearings and the $85.00 bearing press tool that you will need if youre handy enough to fix the problem yourself. PS to all of the poor victims of Whirlpool bearings, go to Amazon and you can buy the bearings and the tool for about $150.00. You will need to order bearings part #10435302 and the bearing driver tool #w10447783... And as far as my matching dryer - knock on wood - it still runs great.

When my wife and I were planning our retirement, we made a to-do list before we officially stopped working. We are loyal Whirlpool users and over the next 3 years we purchased 4 major Whirlpool appliances in preparation of having 8-12 years of problem-free time as we go from a two-income working family to two people on fixed incomes. I retired in December of 2011 and unfortunately this did not pan out on 2 of the 4 appliances. The washing machine, in late February 2012, blew a transmission 23 months after purchase and 11 months after the warranty expired. Discussions with Whirlpool by phone were unsuccessful in getting the repair covered.Ultimately, this repair cost us $265.00. In late April, 9 months after the warranty expired, the refrigerator iced up and had to be manually defrosted, despite being equipped with ADS. My family and I did the defrosting because it was a weekend and tech support was not available. On Monday, the refrigerator was functioning, so I was told to run it and see what happens and call the tech if it happens again. I had done research online and found many folks were having trouble with this refrigerator model and the main problem was the control board”, a board that is used in many Whirlpool refrigerators. I ordered one after the initial problem and waited for it to ice up again. On Sunday, May 20, it repeated the same symptoms displayed and I put the board in myself and it solved the problem. This computer board cost me $95.81.I contacted Whirlpool about the two premature, post-warranty expiration issues in hopes of getting some reimbursement for the repairs. The Whirlpool rep told me that because there had not been a recall on either appliance, they could not reimburse me. They instead offered me a 6-month extension on the dishwasher I bought last July. I have been on several complaint websites and have seen the refrigerator control board repeatedly mentioned - all within the approximate 2-year timeline as my control board failed. My refrigerator was a GB9FHDXWQ01 model, but the control board is used in many of their refrigerators. If this has happened to you, please contact me at ** and, hopefully, together we can get enough data to get a recall and get proper treatment from Whirlpool. Please include your refrigerator’s model number so I can verify the board is the one in question. Thanks.

Got the dreaded 4 flashes LED status - High Temperature Shutdown. Online and vendor documentation says that this condition requires gas valve unit replacement, a $115 option. If your Pilot remains burning, but main burner does not kick in, then a good guess is the circuit board requires a reset. Prior to any further work, test the Thermopile, that is the round item with two blades located below and to the right of the gas valve unit. Move knob on control panel to OFF1) Pull out plug with red and white wires located on front of gas control. 2) Have someone Hold in the control knob on the unit at Pilot, and make sure Pilot flame is burning. 3) Using a multi-meter, set it to millivolt reading, and test voltage across the two wires. Voltage should be greater than 350mV, preferably >500mV. 4) If you get a reading in that range, your Thermopile is good. Turn knob to off position. Do NOT uncouple gas lines. 5) Piezo Igniter wire comes apart, disconnect it. 6) Remove screw that holds front cover. (screw located bottom left as you look at the unit) 7)Cover simply pulls off directly towards you. 8)Remove the screw holding the circuit board to the cover, and remove circuit board by unclipping it - 3 clips, one either side and one at bottom. 9) Unplug the 3 strand thermostat cable, you should now have the circuit board clear. 10) Take a piece of aluminum foil, fold it twice, then lay circuit board on it facing up, do it on top of tank, want it grounded. 11)Using one of the multimeter probes, wrap a piece of foil around it, keeping point free, and ground it too. Then slowly work around the board, touching all the solder connections you see, as well as the chip legs. Pay particular attention to the round objects on the board (capacitors), make sure to ground out each of the solder points, visible either side. (takes about 5- 8 minutes, take your time) 12) Once done, reconnect thermostat cable to board, then reinstall board into cover (dont forget the screw)13) Place cover back into place, screw in cover screw, reattach Piezo wire and black electrical plug with thermopile wires. 14) set Knob to Pilot, get pilot lit (may take a few hits on the Piezo button) and while still holding the knob in, watch to see what LED flashes you get (there will be a 10 second time lapse before it will start to flash) 15) You should either get 1 flash or 7 flashes, that means the board is reset, now turn knob to warm, and see if main burner kicks in. Good luck, and for a half hours work you have saved yourself $$$. PS: If it occurs again, you have sediment build up, need to drain the tank.

Bought this washer 3 months ago. Absolutely hate it! Leaves white film on my clothes. Have to run all washes through a quick wash to get the film off. Hammers the water through the pipes, causing the fittings to come lose and leak! The spin cycle practically dries the clothes leaving them so wrinkled that I have to dry them longer to get the wrinkles out. Waste of my time and MONEY!

Just got new side by side to replace old one. Motor runs every 30 minutes. Stays cold and makes ice but Im concerned about noise. Called Whirlpool and was told to record noise and show to Home Depot where it was purchased. No help from either place. Need to call warranty company. Funny thing it arrived with pieces of some sort of shrub in drawers. I guess this is new and improved and energy saving like newer washer that takes 45 minutes to wash a load.

Whirlpool Cabrio does not clean clothes and leaves white residue. I have had it for 1 year. Spent so much money on this set of washer and dryer and it is a piece of junk. Whirlpool customer service does not care or respond. Worst purchase ever.

Worst refrigerator Ive ever bought. Previous one still perfect shape. 22 years old. Freezes everything on top shelf. Motor making grrrr noises. Had repaired. Now bottom crisper drawers so cheap the plastic is breaking. Drawers wont slide. Now Deli tray lid snapped in half! STAY AWAY from this USA made product.

We purchased a mid-grade Whirlpool Gold Series dishwasher a little over 2 years ago. 14 months in, the motor failed, requiring a $295.00 repair/replacement. That was nine months ago, and now the motor has failed again. That is outrageous! No more expensive repairs on this piece of junk. Its going to the scrap heap. We just ordered a Frigidaire. While I have no experience with that brand, it cant possibly be as bad as Whirlpool.

We purchased this microwave from Lowes. It already had a cracked handle but I wanted to change my appliances to Stainless and it was very cheap. I could just order a new handle and we would still be saving money. I received the new handle and it was very difficult to install, but I did it. Not even 2 months later, the same thing happened to this handle. We thought Lowes had somehow broken the original handle, but after reading all the other complaints, I realized that its a manufacturer problem. Last night, I was cooking on the stove and the plastic from the handle fell into the pot. I had to throw the whole pot of very expensive, and time consuming meal away for fear of eating the plastic.

I bought a Whirlpool gold side by side with freezer on bottom and the ice maker in refrigerator part in March of 2013. Ice maker dropped ice one time. In 5 days Lowes brought me a new one out and swapped it because it was in their 7 day policy. Ok this one worked good for about 2 months. Ice maker quit again. Service came out, changed out some parts that didnt work. 2 months roll by the new parts they ordered came in. Service came out again, put those parts in. Worked for about 3 weeks then stopped again. 3 times new service guy comes out and replaces some more parts and he had the wrong motherboard so guess what, had to order. It took 4 weeks to get it here. They came, put it on. It worked for around 2 months. I asked Whirlpool for my money back, they said that that was not a going to happen. I asked for another refrig, they said they would have to have 3 more service calls on the frig before they could do that. Well I have got a $3000 dollar refrigerator that has no working ice maker and Im sick and tired of the runaround. Whirlpool sucks. I will never buy another thing with their name on it. Matter fact I wouldnt take it if you give it to me. (Why) you ask, because in a short time Im going to have to haul it off for junk and its not going to bring nowhere near what I gave for it at the scrap yard.

We have had a Whirlpool Refrigerator since 2004. We have only had minor issues with the ice maker within the last 3 years. We have had no major problems with this refrigerator. The other minor problems have been the quality of the drawers. After 15 years the plastic started to crack on them.

August 26th 2014 purchased a NG (NO GOOD actually natural gas) Whirlpool water heater from Lowes. Model No. N40561-403. Installed it and everything was fine until this morning August 29th 2014. The indicator light was out and so was the pilot. Tried to light it without success. Called Whirlpool and they are sending me a new controller that now needs to be installed. Called Lowes and they will not take it back. Wish I would have found this site prior to this costly fiasco. Waiting on part now and I will keep you informed as to my progress. I have a feeling this is going to be 2 days wasted and $367.00.

I stumbled across this site while browsing the Net, looking for a way to deal with the same situation I now know you all have been struggling with: Whirlpool Washing Machine! I wonder: Is NASA still accepting volunteers for their living on Mars experiment? Id rather beat my clothes on a rock than touch that POS Whirlpool that has me back on tranquilizers! Mine was purchased about 2 years ago when I was in bad health and my son was handling my affairs. I could tell - just by listening - there was something very wrong with it, from the first load my son attempted to wash. It would start and stop, restart, restop, ad infinitum and made a terrible racket. I told him nobody would intentionally make a machine like that--something had to be wrong with it but he assured me that he had checked both with the store that sold it and he also read the manual. He had a hard time accepting but we thought maybe this was because it was new and would settle down after some use; after all, the store (Best Buy) assured him the sound was normal for this particular machine. However, the weird sounds did NOT lessen nor stop, nor did the starts and stops. Little did we know, this was just the tip of the iceberg! We have encountered/suffered through every nasty performance detailed here: low water, wont spin, leaves clothes soaking wet, wont spin out excess water, lid locks (grrrrrr), it cant seem to switch from one procedure to the next; there is nothing washing the dirt out of the clothes--they just sit in the water and soak(?), then the water is released. Clothes come out with stains still on, so wet that the water must be wrung out of them! Very hard for me with arthritis all through my body! Ive tried countless times to reset machine to Drain & Spin. Ive even waited (yawn) for it to unlock so I can open and then readjust the heavy/wet laundry, trying to make it even all the way around so to avoid an unbalance. But nothing helps. It will start to spin. And then it stops. (wait, wait) Starts to spin again. Stops. (wait, wait) Starts again, does it a bit longer. (start to relax) Stops. Ive spent HOURS engaged in that kind of mindless, maddening frustration, just trying to wash one small-medium load. (I wash only for one person--myself, now.) My son, who got married and no longer lives with me, said the only way he could manage to struggle through it - and agrees it DOES take an inordinate amount of time--for just ONE load, he has to put the settings so that it washes in Deep Water even if small load. He sets Rinse, to 2 Rinses. He sets it to Soak even if the soil is light. Even then, it still makes noises, starts and stops, has to be adjusted several times during Drain & Spin. Last but not least, the noxious odor: OMG! I left one batch of laundry in the machine, with the lid open, as it was very late so figured Id dry them next morning. Some hours later when I went back to shake them out and put in clothes dryer, they smelled so awful, I had to wash them all over again! In fact, Ive had to follow my sons admonition to leave the lid up AT ALL TIMES unless actually washing in order to keep down the stink. I washed my last load with Baking Soda added to wash cycle in an attempt to lessen the odor and get laundry cleaner. Someone here wrote - in their review - that there should be a Class Action (Law) Suit filed against Whirlpool. I AGREE!!! And I want to opt IN on it. There are several law firms that advertise on t.v. that specialize in Class Actions. It would take some time and paperwork but will not cost us anything unless we win the case. Then the law firm gets a percentage. I am willing to work with one more others here who truly want to settle out this problem. I cant believe 2,000 (and thats only here), people are willing to eat hundreds, thousands of dollars of worthless, mind-gripping, rubble such as we have spent our hard-earned money. Other manufacturers recall their defective merchandise and/or replace it, or make arrangements with the retail stores who carry it to make amends, free repairs, whatever it takes to make dissatisfied, disenfranchised customers, whole. We paid for these demons from hell and we deserve to get an equivalent in merchandise (that works properly) or services. That is how it is done here in the U.S. For the life of me, I just cant comprehend why Whirlpool has been allowed to continue selling this junk--why no entity or person or lawsuit has stopped them! As I said, I am willing to work with a core group who is serious about filing a Class Action (Law) Suit against Whirlpool. It may be that the retail stores would be included as well; however, that is a matter best left to the discretion of whichever law firm we select to represent us. For those of you here who do NOT wish to be included, do not worry; you are not being pushed into anything. The way Class Actions work, you have the choice to opt IN (be included to receive your pro-rata share of what is collected). Or you are completely free to opt OUT. By opting out, that means you do not wish to be part of the Class Action and therefore, you will not be included nor will you receive any portion of the recompense collected via the Class Action. Just for your information, though: You are allowed, by law, to bring your OWN lawsuit against all or some of the same parties. The most common reason for opting out, is if you have suffered an extra large financial loss and prefer to file your own suit in order to collect ALL recompense; whereas, sometimes - in a Class Action - the individual plaintiffs may not recoup the total amount they feel they have lost. If you DO decide to opt out and go on your own, realize you will be fully responsible for lawyer fees (although you CAN add them into the balance you are seeking in your suit. Settlement of your claim may or may not include lawyers fees.) Good Luck to all. To those who wish to file a Class Action with some of the rest of us, please contact me if you want me as part of the core group of plaintiffs.

My new energy-saving Whirlpool washer sucks. Laundry comes out smelling as bad as it went in. Washcloths are as dirty as they were when they went in. I have to take my dogs bed blankets to my sons home to wash them because this new washer will not even clean blankets.UPDATED ON 08/21/2015 - I have had two Whirlpool washers in 38 years. They were great. I buy a new up to date energy-saving Whirlpool washer and it doesnt last a year and a half. Now it is costing me $433 to have it repaired. I am preparing a washer and I am very unhappy with to start with. I will never recommend these washers.

Purchased Whirlpool front load washer 2010. Had it repaired 2013. Paid $599 for washer & $648 for the repair. Mailed copy of sales and repair to Whirlpool customer service. Received call from customer service and was told to have a nice day.

My Duet washer is just 3 years old and has had light use as there are only two people in the household. After just 3 short years the machine stopped working. We were told it needed a controller board and new valves. The cost of the repair was quoted at $733.00. This is far more than we paid for the machine. So we called customer service and at first they thought they could sell us a plan for $350.00 that would cover the repair but it was denied by the supervisor. So zero help, absolutely nothing. Now the backdrop here is that our last Whirlpool (same type) is still in use with our son no repairs in 15 years. Does anyone reading this think we should buy another Whirlpool or recommend it to our Friends and family? I think a Maytag is in our future. Whatever happened to companies standing behind their reputation in America?

We just received our brand new Whirlpool washer and dryer from Home Depot. The delivery person started the washer and started the dryer and promptly departed. My husband immediately put a load of laundry into the washer, and he noticed there was insufficient water levels to adequately wet the clothing. Approximately 3 tablespoons of warm water were added at intervals of approximately one minute each. The water level never rose above 3 inches at the bottom of the tub despite setting the washer on the heavily soiled setting. After the spin cycles he removed the extremely damp clothing and it appeared that the machine had not properly completed the spin cycle and drained an insufficient amount of water from the clothing. He tried another load, and it appeared that the sensors were not working which regulate the water levels because most new machines use far less water. However this washer was defective. He then placed the clothes in the brand new Whirlpool dryer. The clothes ran for over five hours and never dried and the dryer never got hot. There was obviously something wrong with the thermostat. We are both disgusted and will never ever buy a Whirlpool product again. In addition because of the extremely poor response from Home Depot, we will never purchase an appliance from them again either. So sad that Made In America, which was on a sticker on the front of the machines, does it mean diddly squat these days.

Purchased a Whirlpool Dishwasher in 2017 as part of a kitchen remodel. I have always had General Electric appliances, and shouldve never changed my brand. I had to have this dishwasher fixed a month after purchase (this shouldve been a clue that this was a lemon). Fast forward to two years, I know have to turn the power off to the dishwasher after 3 uses otherwise it stops running mid cycle and the re-set lights blinks. Ive had a repair person take the thing apart to try and find the problem (at the cost of $250) with no luck. The repair person contacted Whirlpool to see if they could help troubleshoot, the response he received was because it was no longer under warranty they wouldnt even answer his questions, hows that for customer service????

My dishwasher interior and exterior is easy to keep clean. Very quiet and cleans all my dishes. The various cleaning options meet all of my needs. I would recommend this brand to everyone. I have had my dishwasher for 2 years and have had to call for service.

I bought my refrigerator model GX5FHDXVQ0 in 2010 and after this short amount of time, the control board went out. My repair cost was $446.05 to have it repaired. The refrigerator cost over $2,000 and to have to spend nearly $500 on repairs after only 2 years seems way beyond reasonable. I have Whirlpool appliances - washer, dryer and dishwasher - in my home and thought it was a very reliable name. I am very unhappy after reading customer complaints about the very same thing happening to them. I can also see that the company Whirlpool is not very concerned with customer complaints. I find this very disappointing. I will not recommend their products anymore nor will I purchase any Whirlpool products.

I got a BRAND NEW Whirlpool from Habitat for Humanity. I registered it as a new product and was told it came from Lowes. Habitat only warranted it for 30 days but when it went out in 60 days, I called on the warranty. They sent out a repairman who said it was unfixable and after 2 weeks waiting to hear from them, Whirlpool said they would not honor the warranty because the serviceman said it had been dropped. I am a disabled senior citizen, I guarantee you I couldnt lift it long enough to drop it. Habitat said they didnt drop it and so did Lowes. Meanwhile, Whirlpool had the nerve to send me an extended warranty for the same refrigerator that they wouldnt honor the original warranty and they treated me like I was just trying to cheat them or something. The only thing I can do now is put it out in my driveway with a big sign on it to warn others NOT to buy Whirlpool products. Big deal.

The washing machine started leaking and making a noise like a freight train 6 months after purchasing it. We complained in February 2011, but the parts were not available until March 31, 2011. The same problem occurred in September 2011, and we are still waiting for the parts until October 18, 2011. In the mean time, I have been spending hundreds of dollars doing wash at the laundromat.

I bought a matched set of Whirlpool washer and dryer. Within about 3 months the dryer quit running on any of its cycles except heavy duty. About a month after that the washer started messing up. First it quit putting in the bleach. Next it quit adding water except under the heavy duty cycle. Then after about another week or so it quit putting in fabric softener. After a couple of more months it only uses hot water. Now not quite a year after I purchased it the washer now only adds water in the wash mode and not the rinse cycle. Now all this would not be a problem except I had lost the warranty cards and in their website would not let me register it online.

Unfortunately where I live the walls are thin. And my neighbors have complained about how loud my washing machine is. I load it correctly and sometimes while it’s washing it rearranges the clothes and it becomes unbalanced and makes incredibly loud thumping sounds when this happens. I’d say 1 out of every 4-5 times. Also I have multiple towels and clothing that have been pulled. The threads of brand new towel sets ruined from the washer.

I originally purchased a Whirlpool hot water heater in 2005. After numerous problems Whirlpool agreed to replace January 2010. With the new hot water heater, everything was fine for the first two years. Now about every 6 months, we are having the thermocouple and the igniter. Each time you order the part, the part is free but you have to pay $30.00 for shipping. I am tired of dealing with this. We have decided even though we still have a warranty left on the hot water tank we are going to purchase a different one and never ever buy another Whirlpool product. They do not stand behind their products.

Whirlpool Duet Washer - The washer after 14 months started to rumble like a freight train under spinning condition. I call Whirlpool and the answer was to purchase an extended warranty or buy the parts for over $700.00 and pay the tech to fix it for another $250.00. A washer should last more than 14 months. I think the parts and the repair cost more that the price of the washer. This is a rip-off.

Purchased this set in January of this year 2016. The loudness of this machine struck me first along with the constant banging of the pipes in the basement when filling with warm water. The agitator is very loud. Thought I was trading up from a 10 year old Whirlpool front loader set. There is hardly any water in the washer when running a full load. I take clothes out that are not only a twisted tight mess but in some spots are not even wet!!! The dark clothes inevitably need to be rewashed because there is white residue on them!!! I have used the pods and liquid and it doesnt seem to matter, happens with both. Customer service has no answers and say theyve never heard this before.How can this washer wash clothes when there is no water and little if any movement of clothes??? And how is it that we are all saying the same exact things and Whirlpool is not being held accountable??? I DONATED my working fine set to a dog rescue and am now stuck with a brand new machine that works PERFECTLY HORRIBLY. So who is watching you Whirlpool???

Updated on 12/28/2020: I purchased a 28 cu. ft. side by side Whirlpool refrigerator less than 3 years ago (Feb. 18). The icemaker dispenser paddle quit working nearly a year ago and there are no replacement parts supported. Today the ice maker quit making ice. This is crap for a major appliance that youd expect to go twenty years or so. Very dissatisfied. Dont waste your money on this stuff.Original Review: I purchased a Whirlpool side by side refrigerator about 2-1/2 years ago, paid $1,800+ for it. Now two months ago the ice maker dispenser through the door quit working. I replaced the auger motor and that didnt help. Now the parts department says the actuator panels are no longer available. This is planned obsolescence to the Nth degree. No support for a major appliance less than 3 years old. Whirlpool SUCKS!!!

I purchase a suite of Whirlpool Kitchen Appliances April 2017. My range is the slide in model. The knobs are on the front of the stove top. I 4 months in I saw that the paint behind the plastic panel where the knobs are was chipping. Also, the gasket in the oven had some loose threads so I finally decided to call the warranty. Whirlpool paid for the gasket to be replaced but Customer service said the chipping was cosmetic and that only covered for 30 days. I am so disappointed in this range and Whirlpool. My stove looks very used after 10 months. I followed the instructions on what to clean it with and how to clean so I know its not me. The paint chipping is crazy! How as consumers do we deal with this? This Range was a cost over $2000! and they give me touch-up paint!I purchased Whirlpool because I researched prior to purchasing my appliances. I thought I was buying Quality, this is not quality! At Christmas I had a pot of potatoes boil over and the element circle on the glass top cam off with cleaning. This too is not covered because its cosmetic. Ironically, my old glass top Whirlpool range did the same thing. That why I got a new one! I guess it still works. Who cares how it looks... RIGHT? Well, I WAS a good Whirlpool customer. Not anymore! Do not purchase Whirlpool glass top ranges unless you want it to look worn out after less than one year. I have tried to post pictures but this wont let me paste them!

We purchased a Whirlpool Cabrio washer model # WTW6400SW3 in 2009. There are only 2 of us so the machine is not overworked. You would think it is 20 years old. When it spins, the noise is unbelievable. The bleach dispenser always has liquid in it and the fabric softener gums up like crazy. We have stumbled upon other complaints and now we are really worried. I should have followed my past experience and bought a GE! This is all we need. In todays economy who has cash laying around to throw away like this?

I have been unhappy with my Whirlpool Cabrio washer since I purchased it from Lowes. I should have looked online before I bought it and then I would not have made the mistake of buying it. The washer leaves soap deposits on the clothes and sometimes leaves a colored soil. It has ruined numerous clothing by tearing out hems of towels and wash cloths and tore a hole in a favorite sweater. I prefer an agitator in my washer. From what I read, I will soon begin to have other major problems and then I will replace it, but not with a Whirlpool.

Whirlpool model WRF560SMYB04 - We purchased this model Whirlpool in Dec 2015 after having a refrigerator for 18 years with no problems. We started having cooling issues in late 2017 and finally an intolerable fan noise in April 2018. Researched it and purchased a fan. Opened up the freezer panel and found that the unit was completely frosted up to the point where ice had formed around the freezer fan and was hitting the blades. Contacted a repairman who came out and called in the issue to the Whirlpool tech line. He was told that he should check continuity on a couple of wires. If these checked out, the problem was the user interface board at the top of the refrigerator. We purchased a new board for about $100 and installed same. No change. I was now $250 into repairs and no further. We became aware of Whirlpool Service Pointer W10875533A which described conditions that we were experiencing. The issue was a coil thermistor that would corrode (apparently within 2 years) and would not provide accurate signals. Whirlpool also issued an instruction sheet W10902213 Rev A describing how to relocate the thermistor and protect it with foil and tape. My repairman came out, confirmed the thermistor ($54) was bad, replaced same following the Instruction Sheet. We were now out over $300 on a $1000 refrigerator purchased 2 years earlier.Whirlpool issued the Service Pointer (not to consumers, but to repair shops) in Sept 2016 (within our warranty period). We received no notifications from Whirlpool of the defective design. Nor did we receive a recall notice. Moreover, Whirlpool tech group must have known about this issue, but instructed my repairman to replace the interface board. Whirlpool knows they have a defective product out there but are doing nothing to inform the consumer or stepping up to correct the problem. We have contacted Whirlpool to recover our expenses...will let you all know how that goes. Anybody interested in pursuing a class action?

This morning is the fifth morning I had to take a cold shower. My hot water heater keeps going out. When we call, we are told to dust the underneath better, as it sucks dust. Are you kidding? The hot water heater is still under warranty, which means I will have to spend around $200 to have repaired again. So much for top of the line.

In Feb. 2014 we moved into a new Condo and bought all new kitchen appliances, MAKING one mistake, a Whirlpool side by side refrigerator, Model WRS322FDAM 01. It had to be ordered and was received by Lowes on March 10th. Letters from Whirlpool told me that their service warranty had ended as of 2/1/15 which predated our receipt of the fridge. It is a bit noisy with the ice maker, and when it fills up with water, you can hear it, and yes, the ice does fly a bit when you put it into your glass.The worst thing about this piece of junk, is how cheaply it is made. The materials used must have come from the rejected pile of parts. Its just my husband and I, no grandchildren/children and very little company. So, the fridge received average use and then within 6 months, one of the drawers cracked at the back. I tried to glue it back together myself because I was told that it was not a covered item??? My repair lasted a few months and then came apart entirely. When I removed the broken shelf I noticed something around the LED light on the liner in the back of the fridge. I pulled out the meat drawer and found a crack that began at the bottom of the light and had moved about 3 inches to the left, and another one that began at the right of the light and that was about 4 inches or so.Life intervened and when I looked again, the right side crack had split and deepened and it had now crossed over to the rounded edging connecting the back liner to the side liner. The left side crack had also moved further to the left, and is now approaching the side corner. I spoke with Whirlpool and they sent out a repair company who e-mailed a photo of the cracks to them from our home. The company response was that they would cover the crack with 482395 liner tape. - this was their idea of a repair.I then spoke with a Lowes representative who agreed to send another repair firm out. Well, they came today and when they spoke with Whirlpool, they were told to order an Epoxy kit (# 8212572) - this was their version of a repair. I spoke with a supervisor and told her that they were not repairing the liner, they were just placing a bandage on top of the crack. I compared it to owning a new car but having cracks in the dashboard. In this case the dealer would place tapes over the cracks instead of just replacing the dash. Neither response from Whirlpool was a repair. All they were doing was hiding their piece of garbage. She disagreed and would offer nothing further. I told her that I was going to bring this to the attention of any consumer group that I could, and might even see if a class action suit could be brought to bear as there were many other reports of cracked liners. We are totally disgusted with the product and its manufacturer. Whirlpool used to have a good reputation, but after this, it is now at the bottom of the garbage barrel.

I purchased a Whirlpool top load 8500 washing machine from LOWEs two years ago. I noticed that the clothes were not getting wet, clean, were coming out covered in lint, soap film and stained. It is misleading to call it a HE washer since I have to wash each load 3 - 4.5 hours. It is NOT energy efficient if you have to wash each load of clothes 3 times with a rinse. I have tried all of the tricks - changing soaps, labeling the wash as bulky, wetting the clothes to add weight... Washing clothes should not be this complicated. The clothes are sorted appropriately and washed in the right temperature. I do not understand what is staining the clothes. I put new white towels in and they come out stained (see photo)? Lowes sent out a repairman who said the machine would never clean the clothes since there was not enough water in the washing machine to wash the clothes. I tried to return the washer to Lowes but they said it was past the 30 days. Unfortunately, I purchased the appliances on a Lowes credit card so there was no recourse. I then contacted Whirlpool and was put on hold and transferred to various people before I gave up.

I bought Whirlpool Proton 3-door 18 months ago from a popular store at Chennai. I got a problem with cooling within 2 months. Service was availed and it got better. Same problem occurred again after 3 months of service, so I had it serviced again. Now the problem is its not working at intervals. I called the service and the person could not find any issues and says its working well. While it was pending resolution, the problem recurred and refrigeration is nil now. At the freezer, even after 8 hours, the water has not turned into ice and all food products have perished.

My Whirlpool refrigerator is about 13 months old and the paint is peeling off. I was told my an associate at whirlpool that I could have a service person come replace it for approximately $500. And this is only for one door not both.

IPod the Gold Series from Whirlpool appliances including the French door with the freezer on the bottom the induction still two ovens and glass top the microwave in the dishwasher does it cost me about $8,900 dubstep problem with it is after two-and-a-half years of using it the freezer stopped working and coming to find out that not only mine but three other ones in my account have the same problem. The sealed system for the freezer had a leak in it. I lost the freezer traffic to Whirlpool. First time around they said, No problem well take care of the part. To take care of Labor. I waited a month. Nothing happened. I called them back. They said I needed to do something else so I waited for it to happen. Nothing happened. Now I call back 8 weeks later without a refrigerator my house come to find out they told me theyre not doing nothing.Well four weeks later now Im sitting with the stove which cost me quite a bit of money like $2,000 for the induction stove. Now its burned out the computer components. Control panels are both out. It will cost $800 to repair it. Now well pull. Said they will also pay for parts for that but not for the labor so now Im stuck without a refrigerator and I dont have a stove in my house and theyre saying its okay that these very expensive piece of equipment that I bought and its okay for them to only last 2 years. Never had a Whirlpool last me less than 10. I think theres something wrong with this picture.

Our long and tortuous experience began in 2013 and continues to this day. But Ill just give the headlines. In August 2013 we bought Whirlpool BTM French Door KFIS20XVMS11 from Lowes. Three years later we learned that model number appeared on the attached recall notice which had been issued just days before our unit was delivered in September. Neither Lowes nor Whirlpool notified us of this recall which described a simple repair to a part that was leaking so slowly that its effects took three years to show up in a destroyed floor and cabinet enclosure that will cost $2981 (and still rising) to repair.We called AIG, the company behind the extended warranty provider, and they responded promptly by dispatching a Whirlpool factory authorized service technician who attempted unsuccessfully to drag the unit from its alcove over the warped, erupted floor beneath. With the refrigerator half-way out of its enclosure, the technician stopped and asked us to sign a waiver of liability. When we refused, he announced that the problem was water damage and he jammed the unit back into place, leaving dents in both doors and the freezer drawer below.We went to Lowes, who strung us along for several months before sending an engineer whose report concluded that the problem was a manufacturers defect (The Lowes engineer and his associate damaged the unit further when they forced it back into place over a floor made more uneven when they removed the pieces of rotted oak shown in the accompanying photo.). Based upon the engineers report, which Lowes said it had no duty to share, we were given a 1-800 number for Whirlpool customer service, with assurance that we would be taken care of. Although we had to start from cold without the engineers report, Whirlpool customer service was initially very accommodating and gave us hope. For a moment, I thought we were going to get resolution. They assigned a case number and we supplied the requested documentation. That was on a Friday in March, 2017.Monday we were surprised to receive a sternly worded notice from the Whirlpool Law Department that a clerk there would be taking over our case. We realized that we were far from resolution. Why did the Law Department intervene? We dont know. We guess it may be because they want to avoid a class action lawsuit on behalf of possibly thousands of leaky refrigerator owners (Whirlpool, KitchenAid, Maytag, Jenn-Air and Amana units were all among the affected). In any case, since January we have been monkey-in-the middle among Whirlpools various departments, Lowes various departments and AIG, with no progress. What do we want? We just want things back the way they were before our leaky refrigerator did its damage and before Lowes and Whirlpool demolished our good as new looking KitchenAid refrigerator in the process of telling us they wont fix it.Footnote: We purchased all new KitchenAid Architect series appliances in August/September 2013, including top of line cooktop, dishwasher, convection microwave, convection oven and a French door cabinet depth refrigerator. Every unit except the cooktop has required warranty service, including five expensive electronic parts replacements. Fortunately we bought extended warranty service from KitchenAid/AIG, who have been terrific to deal with on the parts replacements. I dont recommend Whirlpool appliances but if you are intent on buying them, I do highly recommend extended warranties. As for the value of Whirlpools manufacturers warranty, watch this space. Ill be back with the final resolution.

Purchased Whirlpool gas hot water heater from LOWES on 9/25/2016. After the installation, tried to light the pilot light for 90 minutes. Followed the recommended instructions, I could not get it to light. Called LOWES they told me to call Whirlpool. I did so, and told them I will return the heater to LOWES the next day. Whirlpool customer service very bad. Returned the heater to LOWES the next morning, went to a local plumbing shop and purchased a Rheem heater. After installation it lit very first attempt. Now three weeks later I get a letter in mail from collection agency that LOWES turned me in for stopping payment on the check I wrote them. After reading the many negative reviews and they disregard for my and my familys safety, nobody should purchase a Whirlpool gas heater from LOWES.

Whirlpool Gold French Door refrigerator freezer on bottom - I purchased my refrigerator at Lowe’s on 9/26/12 and it cooled OK for the first 3-4 months but it was very noisy along with water dripping from the ice maker door. Then sometime in Feb. my freezer started to warm so I contacted Lowe’s service and they scheduled Tech. to come the following week. He found that freezer evaporator was freezing - suspected a leak and ordered one. Replaced that, and a short time later it was warm again. To make a long story short they have been to my house approx a dozen times replacing the freezer evaporator, control boards, adding refrigerate, and replace the reversing valve, and no time at all it was warm in the freezer again. Tech could not find anything wrong with it and added a little refrigerate and the problem was solved... I thought! Two months later the freezer was warming again. Now they say it’s the evaporator on the cold food side has a leak and needs replacing. Been waiting two weeks now on parts. Talked with Whirlpool and Lowe’s about replacement with a new unit but they tell me they only cover parts and labor. Needless to say this is my last Whirlpool appliance!!

We bought a Whirlpool washer in 2010. It started making a loud noise on the rinse cycle in 2012. We called Whirlpool. They sent out a repairman from A and E Repair. Was told tub bearing shot, repair over $700.00. Contacted Whirlpool, was told machine out of warranty. After talking to them, they agreed to send parts if we paid labor. Machine lasted less than a year making the same sound again. A and E sent out same thing, bearing gone. Repair cost $997.17, charged us $136.74 service call after 2 minutes to shake the drum and saying same problem. Was told by Whirlpool, no warranty, tough luck.

Got a fridge Friday night setup, and was not cooling as of Sunday still. Called Best Buy who we got it through and they sent someone out first thing Monday AM to look at it. Per the Whirlpool agreement, the first year has to get serviced through them. Finally got a hold of their service support to get someone scheduled to come on site. 11 days later was the earliest appointment, and they just expected me to deal with no refrigerator for 11 days. I asked of other options, what wait times would be after Whirlpool comes out in 11 days to deem it broken and they repeatedly said I cant give you any what if answers for anything. Were no help at all and just expected me to figure out things for at least 11 days on a brand new 3 day old machine that is broken. The absolute WORST customer experience ever and refuse to buy from them again. Thankfully, Best Buy has a return window so were completely returning it and going with a different brand.

The agitation is too loud. I called Whirlpool customer service and said I wanted to return the washing machine because it was so noisy. Whirlpool customer service agreed that it was noisy and said they would send a technician out. Whirlpool customer service never told me the technician they were sending would cost me 25% of the washing machine cost. The technician said this is normal all machines are this loud. Now I am out the cost of the washing machine plus the cost of the technician and all I have is a very noisy washing machine. Im a real satisfied customer. The machine was bought 12 days ago.

Do not buy anything Whirlpool makes. I purchased a new home and new appliances. In less than 4 years motor is gone in dishwasher. 6 weeks later I have another leak that has ruined my hardwood floors. My fridge is making all sorts of weird noises and alarm is going off. They are coming to ‘look’ tomorrow. And my washing machine is no longer draining. Whichever you buy from check how the extended warranty works... Trail Appliances Calgary uses a company that is horrific to work with, doesnt have a human to talk to and wont acknowledge you unless you pay $149 upfront. RUN AWAY!!!

I have a smaller/apartment size fridge. As a 1 person household it is a perfect fit. Works well & wasnt expensive. I am a Foodie, having it so nothing is too warm/cold, all the temps are equal, is a big deal. And in 10 years no breakdowns.

Purchased a Whirlpool refrigerator July 29, 2015. Our first service call was August 4, 2015. The units freezer was frosting over, the basket rails were covered in frost, which made it hard to open. Items in freezer containers were covered in frost and labels unreadable. The interior light was frozen shut. Since the first service call we have had 8 service calls with multiple appliance dealers. No one can fix the frost issue. It just keeps recurring. Whirlpool did step up and extend our warranty for another year. In order to schedule a repair we have to call Whirlpool, a 45 minute phone call for an appliance company not of our choice to make the service call. The unit has been removed from our home for repair in dealers shop. Very inconvenient for us to have no refrigerator. Whirlpool has refused to replace the unit, choosing instead to patch-patch-patch one service call at a time. Whirlpool has enjoyed years of an excellent reputation. We are very disappointed. This is no longer true.

Whirlpool over stove microwave/convection oven model GH7208XRY-4 - I purchased this top of the line unit in April 2012 for a vacation home kitchen remodel. It wasnt installed until June 2012 and stopped working in May, 2013 just after the warranty period expired. The problem was with the touch screen panel that went blank and the fan/light control switches also failed. This unit has only had light use since my wife and I are retired and use it primarily for heating tea/coffee. I contacted Whirlpool customer service and they graciously offered to cover the cost of replacement parts but I had to pay a service charge of $125. The factory technician said the whole door needed to be replaced since the electronics were not readily accessible so it took about a week to get the replacement door which turned out to be the wrong one and needed to be reordered. The technician finally replaced the door and the faulty fan/light switch. Within a month the fan/light switch failed again but was still under warranty so it was replaced for free. A little more than a year after the last service the touch screen control panel began operating by itself changing screens and beeping randomly. This was somewhat disconcerting but the unit continued to work pretty normally until my wife placed a small plate of leftovers in oven to be reheated for 1 minute. She walked away to do other things and forgot about the food in the oven until we noticed a strong burning odor and found that the microwave was still running some 20 minutes later and had turned the food into a black mass of burned food and the plastic cover was melted and burned.I contacted Whirlpool service thinking that the unit was under warranty from the previous service but they said the parts only carried a 90 day warranty and my only recourse was to pay for another service call and purchase another door panel for approximately $400 or I could buy an extended service contract for $300. Needless to say Im not about to spend that kind of money to, at best, get another year of service from this inferior product. This is simply not a safe product that could have started a deadly fire if I had not been present to stop it when I did. I have probably owned a dozen microwaves from other manufacturers and have never had any kind of problem including a comparable GE unit that has been flawless for over 15 years. I am extremely disappointed that Whirlpool has cheapened its product line to such an extent but I suppose I shouldnt be surprised since I noted this product was made in China.

My wife and I purchased a brand new dishwasher less than a month ago. It stopped working after less than a month. After waiting hours on hold, the service company they sent out, went out of business before the appointment. Now after 3 months of nothing but frustration. I have written many emails and none have been replied back to. Worst customer service ever!! Not not buy Whirlpool or Kitchenaid (same company).

Whirlpool wsv07 psl satina - I bought my whirlpool, two-door whirlpool ref last Jan 2013. Just few days before the warranty expires, I had prob with gasket on lower door. And now six months after the warranty expires, the freezer is not working and wont make ice anymore... and I will be charge 400php for check up. Reading on other reviews, I bet I am buying a disposable appliance from whirlpool. The national ref of my sis been a service to her for more than 10 years and its still going good. Our GE ref prior to whirlpool serve as for 19 years.... but this brand sucks.

I purchase December 2019, I had my previous stove for 20 years and wanted a new fresh look. I purchased the stove during a Black Friday sale. Started having problems with the door not closing. Customer service hold time took days and hours of hold time. Took 3 weeks to repair. Now seeing and hearing sparking and its week before Thanksgiving NO STOVE AT ALL. DONT BUY!!!! What happens when warranty is over????

Purchased a Whirlpool Cabrio Washer a few years back... Started getting F1 error message and just proceeded thru it like most did initially, but now has become pain in the rear just to do one load of laundry as we get the error 2-3 times when we start each load - then on every load w/ 21 minutes left on the cycle. From the looks of things online this is a chronic problem and should be fixed by manufacturer. I called Whirlpool customer service and first person I talked with said they understand it is an issue but no longer are any recalls or reworks on that machine. I asked to speak w/ supervisor and sat on hold until I got one. Was then informed they do know it was a problem but was not something they could do anything about other than schedule a service company to come take a look. I specifically asked if there was at one time a recall or if they were fixing this issue for a while. She said Yes, they took care of some of their customers but are no longer doing that for this model. So basically because I didnt call in at the right time I need to fix my machine myself. I said it will be the last Whirlpool or Whirlpool associated appliance I ever purchase if this is the kind of customer service I can expect... The supervisor just said she was sorry to hear that and to have a nice day. Hopefully enough people read these reviews as I wish I would have before purchasing my Cabrio and dont buy Whirlpool.

I am writing due to the defects and flaws in my recently purchased appliances. I chose Whirlpool believing I was buying the highest quality for longevity purposes. Every appliance I own is Whirlpool or Maytag - same company. I purchased warranties and was told the warranties dont cover my issues and was basically brushed off. I am infuriated. Here is a list of complaints. Refrigerator is cracking on the inside on the inner door and at the bottom. These cracks surfaced within the first year of purchase. The warranty does not cover cracks in the inner body.The oven/range has an exhaust that bellows out of the top of the range in a way that the smoke curls up onto the panel and discolors it. I have never had an oven constructed with an exhaust pipe in the front that pours smoke onto the range itself and into your house. The dishwasher paint has rusted off on the door as have the screws on the inside of the door. The cover panel on the cleaning dispenser of the washer has popped off and cannot be popped back on, hence the guts of the dispenser are always visible and when I go to load the cleansers the front has to pulled out from inside the dispense.The refrigerator is also leaking from the bottom and the ice-maker no longer produces ice. This started off and on for the past 2 years. At first I thought the leak was from a near by window. No it is the refrigerator. All of these appliances were purchased in 2013, 14 and 15. New. I am 56. I have never had issues like this ever in my life growing up or as an adult. Appliances lasted forever. I am one person. How much damage could I do? None.These are flaws in chemical compounding of the paints and materials for cracks and rust. Whirlpool was called various times and was not interested in sending a rep to verify my claims. They said all of my warranties did not cover such issues only motors. Lots of many spent in vain. I will not purchase Whirlpool again as they seem disinterested in customer satisfaction.

Bought Whirlpool refrigerator Model GB2FHDXWS from Best Buy in July, 2012. I began freezing up immediately. Called Best Buy. They replaced it. Now the second one quit. Freezer doesnt work. Refrigerator motor works constantly. Called Whirlpool and was informed unit only has one year warranty. Got an estimate to repair it. Evidently, sealed unit needs to be replaced at $700. Will never buy another Whirlpool appliance again. Will not deal with a company that will not stand by its products.

I purchased Whirlpool 6.2ct electric range on 3/16/2013 from Lowes, Fremont, CA. I tried to bake my cake on 11/19/2013, and preheat it to 400F degree. When the temperature achieved to 400 degree, I put my cake in not even 5 minutes and go to dining room to pick up something. When I turn around, I saw the oven window is so bright and I open the door right away, it has fire from the left side bottom. I turn off the power right away but still has big fire. So I use the fire extinguisher to get the fire off.I went to Lowes to complain, this product is still under the manufacture warranty and I also purchased two years extended warranty from the store. Lowes sent the 3rd party technician over to check, they open the bottom element and insist I drop something to catch on fire. He tried 350F degree is working. But the fact is, theres nothing dropped, no oil, water or and any ingredients, only fire extinguisher powder all over the bottom. Technician put back the cover, I asked him, How do I clean up the bottom extinguisher mess? He said, You dont need to, just clean the top, and wont try 400F degree for me since the top didnt clean up. I asked him, I am so fear to use it now, you asked me to clean it up and try again. I only use my oven to bake cakes, cookies, and muffins, and that day the cake even not still raise yet. How could it catch on fire? Is this product defective? I doubt it.I also called Whirlpool, they said most likely its short circuit. They only provide the repair, unless it cant be repaired, then they replace it. Manufacturer also told me that my temperature is high. I dont think so. I have no problem to use any oven in 425-450 in the past. If this is high, why your stove has function to that high degree? I am so upset with both services. From my concern, nothing dropped to bottom and caught on fire. They all refused to replace the new one and asked me to continue using it. I really dont feel confident to use this one and dont know who can help me to replace it.

Whirlpool Cabrio Platinum WTW8500BWO - It doesnt wash anything very well. I hate it. Dont want it. Wish I didnt buy it. I do all kinds and sizes of loads. My clothes come out dirty - I have to wash my clothes 2 or 3 times.

When you shell out the money for a new water heater you expect it to work the first time. Mine did not. Luke warm water was all that we could achieve. After going through the troubleshooting steps we could not clearly define the problem. So they ordered me the parts and sent them to me. The parts were for the old model control unit and does not mate up with the wiring that is in the unit. The representative was put back in that they had no idea how that happened. And, no wrench came with the thermostat just another thing to spend money on. I told them I have had it. Then they say that this is a manufacturers defect and they can provide me with a list of repair technicians in the area. I gave them one star because I could not give them zero. They should have lead off with the service technician. Still not repaired. I will keep you updated.

Purchased this 27 cubic ft French door bottom freezer fridge (WRF757SDEM01) in Sep 2016. Approximately 8 months after, fridge stopped cooling. Called Whirlpool for service diagnosis since fridge was still under warranty. Service tech stated coils were freezing over due to part malfunction and part needed to be replaced and ordered. He provided me with a temporary fix by defrosting all the ice from the coils since the part would take approximately two weeks to come in. I spent an entire day of annual leave from my place of employment for this service call!!! New part was replaced and fridge was cooling like it was supposed to.Here again six months after the part replacement, my fridge was doing the same thing again; NOT COOLING my food AND there was this awful noise coming from the area in which the part was replaced. That drove me CRAZY to the point I would turn it off in short increments to maintain my sanity. I called whirlpool AGAIN, and this time, my fridge is NOW out of warranty, BUT, the replacement part of five months prior should still be in warranty. My fridge failed the day after Thanksgiving and five days after the fact, the service tech will be at my house again.Worst part of this is I took an entire day off work expecting the service tech to come between 8-12 as told to me by the whirlpool customer service rep and guess what? The company called at 1000 and said they only do appointments in my area in the evenings. I was furious; again another day of employment missed at the hands of Whirlpool. I am not confident that the same part that was replaced in May is defective and I may be going through spouts of an inoperable fridge again and again. Whirlpool really needs to take a hard look at recalling these fridges OR providing quality appliances for the money that we pay. I had GE appliances in my old house and NEVER had issues with the refrigerator. My new builder choose whirlpool and made the wrong choice! I just want a refrigerator that will work operate for the $2100.00 that I paid. I will NEVER recommend whirlpool appliances to anyone... Never!!!

Same as others, We purchased a Whirlpool Cabrio Washer and there is a bearing problem (which seems to be the common issue reported). The washer is unusable at less than 5 years of age. The repairman told us its a bearing problem and its common for this to happen to the Cabrio. How can an Whirlpool get away with selling a defective product?

We purchased our oven from Sears, and less than two years later, the oven would not cook a chicken. We do not use the oven very often. We grill out and use the top burners often. We had the oven repaired through our home warranty program, and now 8 months later, it seems to be occurring again.

Weve had this microwave (WMH31017AW-2) for 2 1/2 yrs and the door is falling apart. It started with one crack and now the middle glass of the door is falling out! I took the door off so the the glass wouldnt fall on the stove and the plastic around the door literally crumbled apart. So disappointed since that was the same reason we took the other one back that was in this house when we bought it. The microwave is now discontinued and when I did find a door online it costs as much as the microwave! Whirlpool doesnt distribute the dependable products that were, back in the day, associated with the name WHIRLPOOL. Shame on the greedy people who have taken over and cut back on quality material and labor to put an extra penny in their pocket!

I purchased my new Whirlpool Cabrio Top Load washer to replace a Maytag that had finally given out in the summer of 2012. I wish I did more due diligence, but with a toddler and a newborn, I needed a washer asap. I severely regret my $800 purchase from Sears. It is now February 2013 and the machine basically only runs on two cycles - Casual and Normal. All the others stop in mid-cycle. Sometimes, the items are still dry or partially wet so I need to switch to another cycle to complete the wash. This is not good for Delicates or when I wash Whites, Heavy Duty or Bulky items which is one of the reasons I purchased the model. The cycle stops when the items are soaked with massive amounts of water. So I then have to turn it to the Drain cycle and start over. After a day of washing one load, I couldve done it the old-fashioned way in my utility basin sink and hung it out to dry ... I dont have the time for this. I am going to make a formal complaint to Whirlpool and to Sears. I cannot keep spending nearly $1,000 for items that break within a year. These companies should be ashamed of their lack of quality. I shouldve gone with the Electrolux and just dealt with the price tag - I wouldve been much happier.

Cabrio washer and dryer are not energy saver by any means! Have had the pair for almost 1 year and have spent at least 3 years of washing and drying time with these. What use to take 30 minutes to wash now takes at least 48 or more and the dryer has to be run twice on lots of loads to dry! The other thing is, with no water in the tub it really does not have a soak cycle to get really dirty stuff clean, so you wash things 2 or 3 times! Now I know why I see these washers and dryers like new in the used stores for $200 to $300. Thanks for the junk Whirlpool.

I have the Cabrio model WTW6400SW2. I have had it for 5 1/2 years and have been happy with it up until several months ago. The F1 would come up when the machine would lock and just start to fill. I could pause it and start it again, and it might do this 1 to 3 times. It would also do it on the rinse cycle. I have been using it because I did not want a repair bill right now. The machine was also starting to make noise when it was spinning. Well, I just happened to break my dryer yesterday so I thought I would get the washer fixed also. Well, the repairman said that the controller would cost $200 for the part, and then he said the pump roller and bearings were going. By the time you add on labor, he said, “You might want to buy a new one.” He told me that Whirlpool has completely changed the washer now because of all the problems with them. He told me to look it up on the computer, and maybe there would be a class action suit. After reading some of the reviews, I will not buy another Whirlpool again.

I bought the stackable Whirlpool Duet. Piece of garbage (model # WFW9150WW). From day one the washer never worked. Error lights/bells kept going on before the second spin cycle. First repair guy couldnt figure it out. And the manual says just unplug and plug the power cable back in. Sure--every time I use it? I called Whirlpool service and they said a new control board was needed without even seeing the machine, which tells me this is a manufacturing flaw. I waited 2 months for the board. When it came, the repair guy put it in and then the machine would not stop filling. So another switch and hose are being ordered. Whirlpool customer service is completely useless. And no one will even discuss replacement. Now Im stuck. $700 out on the first machine and $200 on the extended warranty, which will be useless because Im going to dump the machine. And additional $800 on another new machine which probably wont work either. Oh, yeah, and you have to use special soap, which Ive tried, and got down to using only 1/2 a teaspoon because the suds never cleared. Please tell all your customers never to buy Whirlpool!

I went to Lowes and purchased a new kitchen full of appliances. The refrigerator is the bottom freezer, French door with water inside. The problem is the freezer stays cold and the refrigerator does not. The vent from the freezer gets frozen, and the refrigerator part stops working. Its only 3 years old . We were told it would cost 700 bucks to fix it, and that a power surge could make it happen again. The capitol of power surges, Florida, what a complete waste of money. I spent my life in retail selling their products. Im so sorry to all who have purchased from me... Its really a terrible product. I would give you all a refund if I could. This really hurts...

1st item - ice pooling at bottom of freezer, now repaired at a cost of $100. 2nd item - 1 day later fridge/freezer keeps shutting off and on irregularly. Cant contact anyone one from Whirlpool on a weekend and Trail Appliances doesnt have anyone available to come and look at it and if they did it would cost us another $100+ with no guarantee and we were told by Trail the Whirlpool will not touch it if someone else does. From what I have read seems we now a victim of Whirlpool. P.s. for those who dont know yet Whirlpool not only now owns Bastemp, they also are the makers of Kenmore and those fridges have experience the same ice issues.

Light bulb went out in the freezer. Come to find it is a led cluster with a circuit board only cost $30 to $100. Engineer should be fired. What is the reason to take simple bulb and custom bastardize into an expensive hybrid. Greed.

The technician that was here to repair my propane water heater called Whirlpool to get help with the problem. The pilot would not stay lit, they would not help him. I told him it was installed in a mobile home and he had to cap the gas to the heater, it was still under warranty. Later I found out there was a recall on this heater and that probably was the reason they told him that. I ordered a water heater just for mobiles and am in the process of getting it installed. I kept the old heater for now and will still pursue this issue under the warranty.

I cant begin to tell you what a pile of crap my Whirlpool range with Aqua Lift cleaning is! We purchased it brand-new and it is the slowest oven on the planet! If I want to cook a pizza I have to call home 30 minutes in advance so the oven will be 1/2 heated up. The Aqua Lift has never worked and the company has the most abhorrent customer DIS-service Ive ever had the misfortune to deal with! I hope these scumbags go bankrupt!!! AVOID anything Whirlpool! There is a class-action suit in the U.S. over what a slime bag bunch of crooks they are and how their Aqua Lift technology has NEVER worked!!

N40T61-343 Whirlpool Hot Water Tank - Purchased this hot water tank and had problems keeping lighted. This hot water tank has never worked correctly, every week the burner needs removed and cleaned or the flame burns under burner. The wires burn up and you need to buy a new burner. I have bought two new burners and am fed up trying to have hot water with this Whirlpool unit. The gas company has been here three times, they blame a poor design.

I had a 14-year-old 40-gallon tank that was working great but I decided it was time to get it replaced. I picked out a Whirlpool 400-gallon tank stated to be good for a family of 3 to 4 people. Immediately after installation, I got complaints from family members that there was no enough hot water for morning showers. I turned up the thermostat to the maximum 140 degrees, but there was still wasnt enough hot water. The Whirlpool rep on the phone stated that 3 people cant take back-to-back showers. The unit wasnt designed for this. I told him the unit is advertised for a family of 3 to 4 and I have only 3. I asked where on the advertisement does it state 3 people cant take back-to-back showers? His response was, Where does it state you can? I asked his name and he would not give it to me. If 3 people cant take showers on a unit stated to be for a family of 3 to 4, something is wrong. Maybe it should be advertised as suitable for a family of 1. I will not buy a Whirlpool product again and I advise others to take my advice, go elsewhere.

Our Whirlpool refrigerator was delivered July 27th, 2013 after waiting 6 weeks for it. I was getting something off the top shelf (side by side refrigerator) when a 2-liter plastic bottle fell and put a hole in the bottom shelf where it sticks out under the vegetable tray. I have had grandkids sometimes stand on that shelf of our other refrigerators without ever doing any damage to it. It makes me nervous of dropping something else. I would like to send a complaint directly to Whirlpool but dont know how to reach them.

On 3/31/2012, we purchased a Whirlpool refrigerator (model #ED5FVGXWS07, serial #HR14602963) from the electronic appliance store called SuperCo, located at 17523 Colima Road, City of Industry, CA. Within around a month, we noticed that things kept in the refrigerator all showed weird phenomena; raw eggs were frozen inside the shells and ice is frozen on food and utensils stored, not in the freezer, but on the fridge side. At the same time, all food kept in the refrigerator turned bad easily, especially during summer time. Cooked food went bad and had a bad smell within just three days of being kept in the fridge. Also, the ventilator-like part on top of the fridge (the part which released cold air) had ice frozen around it from time to time.Obviously, the fridge was not working, as the freezer was not cold enough and the side was either making food turn bad or causing ice to freeze on stuff kept inside. The temperature seemed to be extremely uneven inside. We then asked SuperCo for repairs or a replacement, but they refused and referred us back to the manufacturer, Whirlpool. Repair services have been called three times on 2012, according to the paperwork records I have: a) on 5/31/2012, bad damper was broken and replaced; b) on 6/7/2012, (according to paper records from SuperCo), replaced parts; and c) on 6/20/2012, turned ice maker off and cleaned (the hand writing was hard to read).Then, around December of 2012, after the services, we experienced another great problem with this fridge again. When ice cream was kept in the freezer, they appear to have melted and my brother suffered from diarrhea after eating the ice cream. The ventilator-like part on top of the fridge still had ice frozen around it. We then took pictures as fresh vegetables kept at the bottom drawer of the fridge had ice frozen on it, too. I finally emailed Whirlpool through their official website on 2/7/2013 and asked for a new fridge replacement based on the Lemon Rule. An e-solutions specialist, Judy, replied that the product was warranted for a specified time period for repairs, not the replacement of the product, and Whirlpool declined my request for a replacement.Repair service was then requested by me for the fourth time, through email. On 2/21/2013, this fourth repair company came and checked the fridge. After a detailed inspection, the technician concluded that some parts of the fridge needed to be replaced, one of the parts called the thermostat. Strangely, after he called his company, he changed all that he said before and claimed that the fridge was 100% working and that no repairs were needed at all. Even when we showed him the frozen vegetables from the fridge side that we got recently, he insisted that the fridge had no problems at all and left.The way Whirlpool responded to my request was extremely disappointing, with their refusal to replace the fridge after three complete repair visits, and the fourth visit changing the inspection conclusion with no reason. Of course, the disappointment is greatest with the extremely bad quality of this electronic appliance. As of this moment, my fridge could still not keep food well and is causing us bad health. I think the only way I could go to now is to take action against the company for the lemon refrigerator, for breach of warranty, and maybe fraud.

Purchased a larger hot water heater after reviewing the offerings from the big box stores. Obtained a 40 gallon Lo-Nox type. No problem. Found that I did not have time to install and 3 months later had a company install for almost $300. Within the first month the pilot went out at least 5 times. Had the install company come out and take care of the problem. Worked OK for 2 months and now the pilot light goes out again. Watched the flames myself and find them to be yellow. OK, so try to see what the situation is, call the installer, then call technical support. I am in a basement, on a cell phone and the representative basically has zero patience, zero tolerance for questions, treats me like an idiot and probably has never looked at any of the guides but keeps harping on me.I asked 5 times for patience and guidance not to be treated like an idiot. As time went on it was clear that the representative has zero experience in front of the product or the information in the install guides. She kept calling it a manual and I tried at least 3 times to ensure that her manual is the install guide. She never did affirm. I stated I wanted my money back and she stated no. Whirlpool has a very skillful representative to keep consumers away.However this consumer is a small apt owner that purchases appliances, as well as hot water tanks microwaves etc. No longer will I purchase anything Whirlpool. Oh I will send a complaint about this rep, and she said thats fine send it to the PO box Total lack of product knowledge and not even skillful in a conversation asking for assistance. The installer also stated that this product has horrible reviews. I wish I had seen them before all of this. Total frustration and something unwarranted. I am out $900 and am replacing the tank with a Bradford white from the plumber. Lesson learned. Good bye Whirlpool, hope others stay away from Whirlpool everything. Choosing another brand is the only thing that makes businesses wake up and smell the money.

I purchased a high-end Whirlpool dishwasher (WDT710PAYM) a few months ago thinking I was making a wise upgrade. Poor design and it wont dry dishes or properly wash utensils when theyre placed in the utensil rack on the door panel. The unit heavily condenses after using heat dry mode and large water droplets completely cover the top of the inside cabinet. Eventually, they all fall down into the dishes and you now have wet dishes again. The Whirlpool tech’s response was to scratch the cabinet plastic with a scratchy pad, smear rinse aid over the plastic cabinet and that should stop droplets from forming. Whirlpool’s customer service told me they shouldve never told me that and what I should do is be there during the drying cycle and open the cabinet door to let the steam out. This is completely ludicrous. Dont walk but run away from Whirlpool products.

Whirlpool top loader washing machine Model CAE2743BQ0 - Highly regret buying this washing machine. It was expensive and it doesnt actually wash clothes. Clothes come out with streaks of dirt and detergent since the machine barely has an agitator and whats worse it doesnt load enough water. I called Sears for repair three times and the technicians say thats the way this machine is. Its terrible! So frustrating. Since we were over the 30 day return period when we noticed the issue wasnt going away, Sears wont do anything. DO NOT BUY THIS MACHINE!

My boyfriend and I purchase a Whirlpool Cabrio Washer and Dryer on November 28, 2010 from Lowes in Shepherdsville, KY. Just after we purchased the set, I read some bad online reviews of the set. I called Lowes and talked to Chris ** in appliances and he assured me that this was a good set and that it was very popular with their customers. He assured me that if there were any problems that Lowes would make sure they did everything they could to fix and/or replace the appliance(s). My intention was to cancel the order when I called, but he convinced me not to, now I completely regret not canceling that order that day.In May of 2011 we called Lowes to report that the dryer was not working properly; they sent a repair person from Maytag Service Co, 1500 South Shelby, Louisville, KY 40217, phone number 502-637-6526. The name on the card that the repair person left is Steve **. The repair tech indicated that the problem was that the belt had come off and he put the belt back on the dryer. It has worked without issue until about 2 weeks ago, when it stopped drying again. I assume the belt is off again since it is performing exactly the same as it did in May when we had the repair company out.I called Maytag Service Co approximately 1 to 1 1/2 weeks ago to see when a tech could come back out and I was told they only work Monday - Friday. I told them both my boyfriend and I work and cant really take time off from work to be home for the repair. The male on the phone indicated that they could call 30 minutes before arriving if that would help. I told them that wouldnt really help since I work in Louisville (about 30 minutes from Shepherdsville where we live). He indicated that was the best they could do.Yesterday, November 7th sometime during business hours. I spoke with someone in their appliance department. He indicated that I would need to call Maytag Service Co at 502-637-6526. I called them and was advised that they could come out the next day (today), November 8th, but they could not give me a time window. I spoke to a female who did not identify herself. She specifically stated, If someone has not called you by 8:30 a.m., you can call us and we will give you a time window. Since I had just earned a vacation day at work, I so desperately need my dryer working that I took the day off to get the dryer fixed. I got up at 7:30 a.m. this morning to prepare for the service call. I have not left the house today. At 9:20 a.m. my boyfriend called and said that the service company had called and they were not coming out. I called them back and again spoke to an unidentified female. She indicated that they called my boyfriends phone at 9:00 a.m., he called them back at 9:20 a.m. I was on the phone with the female at 9:25 a.m. She indicated that I should have called at 8:30 a.m. and that they never call their customers because they dont have time to call them all. She said that when my boyfriend didnt answer the phone at 9:00 a.m., they had to send their tech on to the next call because, they cant have their tech waiting around 20 - 30 minutes on customers to answer their phone. When I told her that I took my only vacation day to be home for this call, she indicated that I would have to reschedule for another day because their tech was already on his way to another city. I then stated that I thought that was ** and she hung up on me.I called and spoke with the store manager at Lowes in Shepherdsville, KY. He called Maytag Service Co and was told that I used profanity and was rude and that I would not provide them with an alternate number. Most if not all of these are lies. I did say **, but I was not rude and I was never asked for an alternate number. I give out my number and my boyfriends number to almost any company we deal with. My boyfriend is also a service technician for Icee Corporation and he is not allowed to be on a cell phone in his work truck; therefore I always give both numbers since I can easily answer the phone throughout the day. The store manager made several attempts to try to find another company to come out and service our dryer, but cannot find anyone to come before tomorrow. Since I used my only vacation day today, I cannot be here for the technician and my boyfriend doesnt have any vacation or sick time to take to be home for the call.I cannot believe that after spending over $1300 on a Whirlpool Washer and Dryer set (including several hundred dollars for the extended warranty), that we cannot get our dryer serviced at our convenience. Since when did companies only repair or back up their products at their convenience? This in my opinion is the worst customer service I have ever seen. I thought Whirlpool/Maytag was a good company; now Im not so sure. I just wish I could return the set and do more research and find a quality appliance that wont break down 2 times in less than a year!!

Purchased WP fridge, stove, and dishwasher at the same time. All were the gold series. At 20 months, freezer stopped cooling. WP would not cover the repair. Refrigerator has been noisy from day one. This company does not care about their customers.

We have had the washer and dryer for over 10 years and they are still working great. We have had washers and dryers in the past within 2 years have failed, and repairs have cost us almost as much as a new one. Thank God for the ones we have now.

We purchased our 4 French door refrigerator in November 2014. It started making a loud noise, like an air compressor about a month ago. So loud that when we are watching TV in the bedroom we have to close the door! It continued to get louder and more frequent so I called Sears. It is under warranty so they sent a repairman out. When he came, he said it was because we had the refrigerator too cold & it was causing ice to be stuck around the fan??? We had it at 5 and the coldest is 7... He suggested we put it on 3. 2 days later and it is making the same noise again. Will be calling Sears again. I saw a similar review saying the same thing!!!! This is a five month old refrigerator! Very disappointed in product and service.

Old stove does the job. I need a new and updated one. Need a warming drawer. Lower drawer does not close properly anymore. Paint on back panel is chipping. We are limited to range choices because of space.

The top of the range stays very hot. Not the burners -- just the top of the stove itself. Now the oven pilot wont light and there doesnt seem to be any sound or smell of gas when I try, though the range works fine.

We purchased a 4 piece set of Whirlpool kitchen appliances and have minor to major problems with 3 out of the 4. We had problems with our gas range/oven from the start. When I called to register the brand new range they told me it had been previously registered to someone else and they made me fax my receipt to them proving that the appliance was purchased new. Lowes said it was brand new in the box when I purchased it leading me to believe Whirlpool tried to pass off a refurbished product onto Lowes and then onto us. No surprise when the stove stopped working 3 times in barely over a year. It was so defective Lowes ended up replacing it for us. Not Whirlpool... they only argued with me about how the third time it was out of warranty and offered no help in fixing or replacing the defective oven. Now our ice maker just stopped dispensing ice 7 days after our warranty expired on our refrigerator model # WRS586FLDM00. Whirlpool will only agree to cover parts and is sticking us with the service call and labor! And thats not all... the plastic coating on the dishwasher racks started coming off exposing rusty metal when it was barely over a year old and I have received a postcard indicating there is a lawsuit involving our model for overheating and fire events! Now waiting for that to be our next issue. I am so disgusted with Whirlpool. We bought Whirlpool appliances believing they were quality products. They are quite the opposite. Wish I had researched their reputation and history of complaints before buying. Do not recommend Whirlpool Brand. Sincerely, Disgusted in California

We bought our Duet washer in 2007 with a three-year warranty. In 2010, the washer started banging so we called it in for repair. It was determined that the bearing on the drum was bad, so the entire drum assembly was replaced because the poor design of integrating the bearing into the drum. Almost one year to the day, our washer started banging again. The washer is no longer under warranty. We were told the parts are around $400 plus and another $400 for labor.The repairman was from the store we bought the washer and he is a certified Whirlpool repairman. He related to us that this is a very common occurrence for Whirlpool washers because they are using cheap foreign made bearings. He services this problem on a weekly basis and Whirlpool will not do a recall because unless it is a safety hazard, it is not a concern to them if consumers have to pay out the nose for cheaply made parts. This repairman informed us that during training at a Whirlpool class, he learned that on the main board of the washers, they could put a 2 cent lamp that would indicate a bad board which would simplify diagnosis, expedite repair and reduce service time, but Whirlpool wont do it because it isnt cost effective. The repairman told us that we can call customer service until we are blue in the face, but Whirlpool wont give a ** because it is out of warranty. He sees this happen all the time with Whirlpool. My wife called Whirlpool Customer Service just to be told we are ** even though the cheap, crappy bearing that went bad was done under warranty, a year earlier.Well Whirlpool, I guess you lost another customer who will make sure that you lose a lot more customers. We are going to take our business elsewhere and we will make sure all our family, friends, neighbors and coworkers know how bad your customer service and poor attitude is toward consumers. If you cant back your products when you put cheap foreign garbage parts in your product, then you need to lose business and get out of the market.

As very happy owners of a previous model of this fridge freezer when ours needed replacing, we went direct to Whirlpool and bought the latest model. What a mistake! Other comments on this site are so accurate if only we had seen them before. A kitchen floor covered in ice mush (cubes seem out of the question) and tepid water from the water dispenser whereas on the previous model it was chilled. Basic functions that the previous model excelled at. Sadly it is also badly designed inside the fridge. We raised these issues with Whirlpool within our first year who merely said sorry you are unhappy and thanks for your comments. Be very wary of Whirlpool products and service.

We have all kitchen appliances from Whirlpool, but it is not what we choose, that was builders choice. We, two people, are living in his apartment for almost five years, and first problem was with oven - the window in the door it is leaking somewhere, then microwave - the all front door plastic is cracking (we using microwave maybe twice a week) and is it placed under the oven. Now we have problems with fridge - the plastic inside the fringe is cracking. We called Whirlpool customer support and Whirlpool do not even want to hear it about the problems - they just want that same authorized technician will came to your apartment to inspect these problems for $95, it is not even important whose fault it is. This company, Whirlpool really DO NOT CARE about the products, which they produce - as long it is sells... Now we know, we made smart decision - do not accept the washer and dryer (we get it from Bosh - it makes me happy). Now we just wait till all Whirlpools appliances will stop working and never ever look back to Whirlpool.

We purchased our 4 French door refrigerator on 1/22/15. It started making a loud noise, like an air compressor. It continue to get louder and louder over a period of a couple of days. Called the dealer where it was purchased and a repairman was not available for another week. When the repairman showed up and diagnosed the problem which was a leak in the freezer causing ice and the fan to hit the ice, they were not equipped to fix that type of problem. We were advised to call Whirlpool consumer dept. which we did, and was advised they would send out another repairman and would be another week. Have had to move food and freezer items out of refrigerator. Two and one half weeks and no solution. Five month old refrigerator that is not usable. Very disappointed in product and service.

I purchased a Whirlpool washing machine (model: AW01D8810 S silver color) and a Whirlpool refrigerator (model: WBM329 TI) together from United Arab Emirates for Dhs 1999/- & Dhs 1199 /- respectively on 28 Jan. 2011. I sent this machine to my hometown (India) in the same packing and I used the washing machine only for three months and found a complaint. I informed this to service center in Trivandrum, Kerala. Their team came to my home and told me that warranty cannot be given as I purchased machine overseas. They added that the PCB for the machine is having complaint and they dont have stock in India. Also, the machine is no longer available in the factory. The Whirlpool company completely stopped manufacturing the abovementioned model. Again, I came to UAE and contacted GEC group of companies for the PCB part. I got a quotation for PCB Dhs 425/- but the items is ex-stock with them. The machine cost only Dhs 1999/- and if I spend Dh425/- only for PCB, and the machine is with me for the parts since one and half years. I dont know what to do. If I spend another Dhs 600 + this PCB cost then Id rather go for another new branded washing machine. The model of machine is AWO1D8810S and serial no. is 12 nc 859247463000 003. Please advise what to do or if I can find the PCB in Kerala. What will be the cost? I am ready to pay the money for PCB but not for the above rates. Please advise, sir.

I bought Whirlpool refrigerators around one and half year ago. After 1 year the light of refrigerator was broken. I was contacting customer service and arranged the fix. However, the contractor never showed up. After I making the call several times, I gave up finally. The repair is really bad experience!

Within 5 months my 850$ dishwasher broke. 2 months to repair and 15 plus hours on the phone. Warranty is cryptic. You must allow them 30 business days from when they order parts. Buy Bosch, wish I did!

Just purchased Whirlpool top load large capacity washing machine with no agitator at Lowe’s three months ago. I sit at the kitchen table in my freshly washed exercise clothes and smell body odor. There were six exercise items in the load and supposedly enough soap. The load washed for 45 minutes last evening. Yard work clothes washed yesterday are not clean. I had to remove grass from the bottom of the tub. When I iron my smocks for work, since I work with animals, I pick pet hair off of them as I iron. Judging from other reviews, this torture won’t last long, before I need to replace this piece of junk. My last washer lasted 20 years. If it didnt leak water, it would still be running. Thanks Whirlpool, I guess the joke is on me!

I spoke to Sue in Tennessee that refused to let me speak to a supervisor regarding replacing a light bulb in my microwave. Sue insists that I can do this, despite no instructions in the owner’s manual and warnings all over about electrocution if I open the panel. Sue refused to assist me and is sending out a repairman. I will never do business with this company again, and I am angry that Sue refuses to see a problem with me paying $75 to replace a light bulb in a nearly new microwave. She continued to give me incorrect instructions on how to replace the bulb, and the owner’s manual does not have instructions nor do they exist on the internet. The owners are not supposed to dismantle this model, but Sue at Whirlpool Customer (no) service told me that I have to pay. Seriously? For a less than two year old microwave? Never again. I think I will take this unit out and get a GE.

My complaint is basically the same as all the others. Clothes do not come clean in my brand new Whirlpool washer. Ive had two other Whirlpools, and they were fine. This one, however, is a piece of junk. One of the main problems is that the washer is designed to use only lukewarm water, even on the hot setting, it does not use hot water. Another problem is too little water. Another irritating factor is the constant locking of the lid. Another problem is the constant starting and stopping of the agitator. This cannot be good for the motor. Im at the point of giving away my new washer which Ive had for exactly one week. This is a totally inferior product, and I feel that I have been really ripped off.

I purchased a new Whirlpool range and had it fitted for propane. I used the stove daily and within two weeks, the temperature started fluctuated constantly. Several things I tried to cook ended up burned. I called Whirlpool to ask them for a possible solution. They wanted to send a repair person. I live on an island and knew it would take forever to get someone here. My appliance person said it could be only two things - the temperature probe or the computer board. I purchased both things and had them shipped to my address at my expense. It cost $257.00 to get the items. My appliance man on the island installed the two new items. I was hoping that would fix the problem. I am sad to say it did not! The oven still fluctuates wildly. I set the temp for 350 degrees and it shoots up to 450 degrees. I turn the temp down to 325 and it settles in at 350 for a period of time. Then, without any warning, it will shoot back up to 500 degrees. I have to open the door and let the temp back down to 350. This is how I have to bake and cook with this disaster. Wish I never purchased a Whirlpool appliance!

They really dont make them like they use to, do they? This Whirlpool Cabrio aka Caprio has given us problems for the past 3 years, weve owned it for 5 years. It doesnt matter how much, or how little clothing you put in this washer machine. It will start going NUTS, Thudding, Banging against the inside of itself, completely out of whack, and then it will show a UL where the time is shown. Every time we do laundry this happens, and we have to stick our hands in the hot water and reorganize the clothes, and pull more and more clothes out till theres only about 3 items of clothing left! This washer is GARBAGE! I advise people to keep away from it. The washer we had in the past lasted us years upon years. These washers of now in days are Crap Garbage. Keep the fancy tech look, and give me the old fashion Knobs ANY DAY! Whirlpool brand is Not what it once was.