Today, after five years of washing items in the Whirlpool Cabrio top-loading, HE washer; I am taking the time to express just how poorly this machines operates. Clothes do not get clean, dish towels with dried food still have food on them, and towels get holes. If I wash items with sand after going to the beach, the dryer vent has to catch all of the sand that was never washed out. Rust has developed on the inside and drips down to ruin clothes. I would take back my previous washer with the agitator that was over twenty years old in a heartbeat. When we needed a new dryer, we went ahead and bought a matching washer. Painful decision!

Our 2 yr old Whirlpool Gold refrigerator (French doors, bottom freezer) stopping freezing/cooling. When we got a repairman to come take a look at it, he said the compressor is not working. The warranty on the fridge is only 1 year. However, the compressor is the main component of a refrigerator, and the repairman said 5-6 years is the minimum it should last before breaking. I called Whirlpool and asked them to pay for the repairs of what is quite obviously a defective part. They refused. Needless to say, I will never, ever buy another Whirlpool product again.

RE: Our Whirlpool gas range/oven model# GW397LXUS05 installed Oct 2010 started acting up when setting the oven temperature. The 0 doesnt work so we input 355 instead of 350 etc... Other numbers have started to fail as well... Also it needs cleaning but a neighbor with the same model said whatever you do dont use the self clean for the oven, as they did & it literally burnt out the control panel costing them over $400!! Say what?? So we cant use the self-clean feature or well really fry the control board... Would LOVE to hear Whirlpools explanation on this one... And a minor issue but nonetheless worthy of a mention, the oven drawer never slides in/out properly & hasnt fit right from day one...

If you are thinking of buying any Whirlpool products, please think twice. We had a dishwasher, lasted 2 years; range with cook-top, within 2 years computer had to be replaced and again in another 2 years. Needless to say we did not replace either one with a Whirlpool. Over the range Microwave Oven Magnetron blows in 5 years. 3 months over the warranty. In a call to Whirlpool we were told we are sorry you have had all this trouble, we will send a repair man out and he can replace the parts needed. Thanks, but no thanks and went out and purchased a Samsung model, probably cheaper than the repairs would have cost us. There are so many good appliances to choose from. Please stay away from any Whirlpool products, no need for additional aggravation.

Purchased Black Ice French Door refrigerator in December 6, 2012. Used warranty first year due to loud noise & replaced whole back panel in top part. They seemed to know it was a design flaw. Thought all would be well. Purchased extended warranty for second year and did not need so did not extend again. Now it has been 2 years and 7 months and the ice maker had to be shut off due to water running down outside. The refrigerator is no longer cold enough--60 Degrees (too warm) and freezer door would not close all the way (had to duct tape it shut). I certainly expected it to last longer than that for a $2300 fridge. The old Kenmore was 15 years old and still worked. After reading all these reviews it is time for a class action lawsuit! We have to buy another now but it wont be Whirlpool!

I purchased a Whirlpool Cabrio washing machine in October of 2016. This has to be the worst purchase ever. I agree with most of all complaints I have read. I am using more water, electricity and time to get one load half clean. How can this be efficient? The only problem I dont have is the noise; very quiet as if it goes to sleep. Seems to me the company has misrepresented this machine in its claim of being high efficient, washing (cleaning) machine. I too say Do Not Buy this Machine!

This Whirlpool washing machine is incredibly annoying and slow in everything it does. First off when you press the START button it takes 2-3 minutes before it decides to do anything, like maybe add water (except click, click and more click). If you have pressed the start button and you want to stop it to add something... again you have to wait almost 2-3 minutes before the lock is released and you can open the door. I am at 2 hrs and 15 minutes as I write this on the LIGHT WASH cycle with extra rinse and its still going. I have never seen anything like it. Cant imagine how long a HEAVY CYCLE takes. Cannot even try to measure the time. I put the load in and go to work and hope its complete when Im done 8 hrs later.We had a Maytag for 15 years with no issues (other than a drain hose cracked and had to be replaced) and it was time for a new one with a move to a new place. The sales associate convinced us this was the best machine at the time... Well what a mistake that was. There are no complaints about the actual washing. Everything comes out clean but I suppose taking that long I cant imagine why it wouldnt. I certainly cant recommend a Whirlpool washer to a friend, because I dread the thought of doing laundry at this point.

The washer and dryer, Cabrio, machines are not even 4 years old and Ive had to repair four different things! Literally just replaced idler pulley today, went to put a load in wash and F1 code appeared. Control panel, 350.00 for whirlpool or a technician to repair! 285.00 for part. I called Whirlpool and was not offered any apology. Never again will I purchase Whirlpool crap appliances!

We purchased a Whirlpool stove a year and half ago. We were cooking and kept hearing (tick, tick, tick) noises. Couldnt figure out what it was. After removing the pot there was an area of 2x4 inches that had melted in. Not sure where the glass went. But it looked like a chip but on the surface.

Its amazing to me that every other complaint listed here is identical to the problems I have had with my Duet washer. In the past 4 years, I have had two Duet washers and now, the 2nd one has to be replaced. On the first, the control board blew and it was too expensive to consider replacing. I had a new Duet later that day (I use a great, small local appliance store that is reliable and has a great reputation so I know Im not being screwed over). This one made it for 3 years before the bearing broke. It sounds like its about to launch into orbit. I can either continue to use it until it stops working (likely very soon) or just replace it now as its too expensive to repair. I cant take a chance on it breaking down, so...Thats a good gig Whirlpool has, huh? Repairs are prohibitively expensive so they sell more machines. Whirlpool appliances used to be among the most reliable and well-made. Not any more. Two Duet washers in 4 years in my honest opinion is ludicrous. When it did work, it seemed to do the job and I have to admit to very, very heavy use (3-5 loads/day). But the days of a washer lasting 20-30 years are long over.

Just like many other reviews about this brand - our microwave went bad after only 14 months of using it. Initially the door sensor would register - it wont operate even if the door is closed. Or it will keep going even if the door is open. I contacted BBB and the Whirlpool corporation regarding this safety issue. I pointed out that the safety mechanism is faulty and they should recall all of those models that have similar issue with door sensor. This is extremely dangerous for households with kids. There is a reason why this safety mechanism is mandatory in all microwaves! Whirlpool pointed out to me that I should not try to operate microwave with open door and refused to take any responsibility. Ive owned probably 10 different microwaves over the years and NEVER had micro go bad after only one year, yet alone have completely faulty safety mechanism. Consumer beware!

I have been given a runaround for over a month to get my refrigerator fixed. They gave me a defected piece and it broke down in less than a year. I have been calling them up every day and they put me on hold forever-then they ask for all the details and direct me to another company. As of right now I have not received any help-My family is really frustrated as we have no fridge all this time. I dont know what to do.

I purchased Whirlpool washer in 12/2011. Immediately, I noticed the noise and called service. It was a whistling noise. The clerk told me nothing was in the manual and it would cost $65 to have a tech come out. He advised me to wait until it was louder and more consistent. I called again when it was. Gear case was replaced on 5/2/2012 five months after purchasing the machine. I called Whirlpool again in 5/2013 - same problem. I was told the diagnostic call would be $95, labor which is extended for a major job is $85 and the part would be $290. It would cost $470 to repair as the gear case was guaranteed for only three months. This machine is a lemon since the gear case is now shot again prior to the machine being 1-1/2 yrs. old. I called Whirlpool and spoke to Amy (Esc. Sup.) who advised they would replace the part only. The appointment was scheduled; the tech came, did diagnostics reading a manual and said the gear case is shot. I inquired, Well, you are going to fix it today right? The reply was, Oh no, it has to be ordered and its a two-man job. When I arranged for this appointment, this was clearly explained and what I was expecting, two men and the part to be replaced with them. Now its a five-day wait to get the part and then a scheduling issue when they could do it. This machine is a lemon and Id like to have the machine replaced or my money refunded. This is a runaround, scheduling the appointment and having someone show up with the manual and having no parts and not knowing that it was the part which broke again from previously being replaced.

Standard looking dishwasher. Quiet and efficient. Best value for the money. Highly recommend. Chose this brand over more expensive options and made a great decision!!! I dont have a single complaint.

I purchased a Whirlpool 3 years ago. It was on the lower end for price so my expectations were not that high. It does an average job cleaning dishes so for the price I could give it 4/5. The pump and motor just went and had to be replaced. Almost the same cost as replacing the whole machine. The repair technician that did the work stated that this was a very common problem with Whirlpool in recent years. Of course this is not covered by warranty. So if you purchase a Whirlpool realize you are rolling the dice.

After just 22 months I need to shell out $300 for a new microprocessor. My Miele lasted for nine years. In the olden days washing machines could last for 15-20. Do not buy Whirlpool, from what I understand its a dying company...

Top loading HE machine. Washer does not clean. I have tried all manufacture recommendations, changed detergents and tried laundry boosters, all to no avail. Tshirts, pants and socks routinely come out of the wash dirty and must be re-washed. This negates any energy savings. Also, the noise from the spin cycle is very loud - the washer is on the second floor but I was told by sales person that this would not be an issue with top loader. Overall, very disappointed and after all these years, I have finally given up on this washer and will junk it.

We purchased this washer on 2008-04-27. It ran okay until a few months ago when it began making strange intermittent noises. This is now happening more and more often. I reviewed a lot of websites and see that this is a common occurrence for Whirlpool Cabrio washers, and Whirlpool will not stand behind it and make it right. Im going to write them a letter mirroring what Im saying here, and remind them that other appliances in my house are coming due for replacements or upgrades. Whirlpool and its affiliates will not be part of those upgrades going forward. I have no patience or tolerance for expensive **, which is what they put out here. I will have to purchase a replacement washer since this seems to have two major areas of failure, both extremely expensive to repair. I might check out Roper and see what they have--its apparently very well rated by the folks that work on these things.

Not completely happy with my purchase of the Whirlpool Gold Series refrigerator I just paid off this month. Have had the refrigerator for one year. To be as large as it is, it really doesnt seem to be able to hold that much food. The refrigerator is on the top and the freezer is on the bottom. We began having issues with the ice in the ice maker becoming frozen together and forming clumps of ice. The ice felt damp to the touch rather than feeling completely frozen. We called the manufacturer and they said to be sure the vents in the freezer section were not blocked by food. So you have to be sure to load the freezer so that food doesnt block the vents. Additionally, when filling your glass with ice from the door, unless you are EXTREMELY careful, all of the ice will not go into the glass but spill out onto the floor. Weve had the refrigerator for one year and I still have ice coming out that doesnt make it into the glass. It is not user friendly at all. One last thing - the refrigerator has double doors and to get to the section of the middle pull out drawer, you have to open both of the double doors, letting out a lot of the cold air. For the expense of this particular refrigerator I would not recommend purchasing it. My last refrigerator was a Whirlpool as well. It lasted 17 years and I was very happy with it. This Gold Series was supposed to be a step up, but I feel it was a step down.

I purchased the 19 cu. ft. Whirlpool Estar refrigerator WRT 3595FYW on 4/28/12. Freezer began showing frost immediately. Repairman from Marcellas Appliance where purchased - (518) 381-1957, came to check it, put a sealer around the door openings of refrigerator and freezer. Frost continued. I called Whirlpool. They sent another repairman from EB Russell in Schenectady, NY, door needs replacing. Door was ordered and when received by them, the door was replaced on my refrigerator.In August 2012, frost is in freezer, on its roof, on the door daily. I called Whirlpool. I told them I wanted to remove it from my home. Whirlpools reply was, you have a repair warranty, not a replacement warranty. I was not advised of this when I purchased. Otherwise, I would have gone to Sears, Lowes, etc. On 8/16/12, another repairman from The Appliance Man, Albany will be here Monday. Its dishonest sale, replacement was advised possible by Marcella, that it was just a matter of course to get an okay from Whirlpool. This is not so. There is no replacement or return policy. Please help. Thank you.

I have been extremely dissatisfied with the Whirlpool Cabrio washing machine!!! I tried to take it back and Lowes would not let me return it because I had had it for 6 months. It doesnt put enough water in the machine to get all of the clothes wet. It doesnt get the clothes clean and it leaves some kind of lint residue all over dark clothes. I am only able to put in 1/4 of the clothes I put in my Maytag washer which I loved, but it wore out. I am also short and it is so deep I have to use a stool to get up on to reach into so i can reach the bottom of the machine. Even though it is a huge tub, I can only put a few pieces of clothes in it to get it to clean the clothes. It is a very poor design and needs to be recalled!

After reading all of these reviews, Im not surprised at the negative comments. My husband and I owned a Whirlpool washer and dryer for 25 years prior to them both dying the same summer four years ago. I absolutely would not purchase anything but another set of Whirlpool washer and dryer because of the longevity of our previous set.We bought the Cabrio set 4 years ago this summer. After two years, we discovered it had a slow leak at the back hot water valve and underneath it somewhere when it spun and it had slowly leaked under the wall into our living room which eventually caused our hardwood floors to buckle. We had to replace the flooring in that section at a cost I will not even say and had a repairman come out and fix the lid lock, leak where for some reason there wasnt a washer in the valve area, underneath and the problem with the spin cycle. This was at a cost of around $200.00. Of course our one year warranty had run out. The next year it did the SAME THING AGAIN!!! Although we caught it quicker, we STILL had to replace a small section of hardwood flooring and have the machine repaired yet again at the tune of approximately $200.00. Now, as I type, our machine has yet again flooded our laundry room one year later and I will have to call a repairman in the morning yet again! Its becoming an annual and costly thing!!!I came across this site while looking to see if by chance this machine had been recalled and we would be able to get another one at no cost since we have already paid a fortune for the errors it has caused. I will be reporting to the Better Business Bureau and writing YET ANOTHER letter to the Whirlpool company with the hopes that they will recall this machine!! If enough people protest and report this shoddy workmanship, maybe they will!!!

I shouldve read the reviews online about Whirlpool before buying our washer and dryer Duet. 4 years later the main bearing is going out and its 1200 to fix it. No support from them or anything. They did offer a loyalty discount on a new washer... No thanks. Just would be another headache a few years down the road Im sure. Goodbye Whirlpool. Never buying anything from them or their other brands. Ill definitely spread the word too.

EveryDay Care? Every day I hope the part needed to make my new Whirlpool refrigerator work again is delivered so it can be repaired. I bought it in December and since then the WRF992FIFM has had the ice maker fail and need replacement and the fan unit in the refrigerator went out 2 days later. It has been nearly a week now and I am using dry ice to keep my refrigerator cold enough to store some food. The authorized repair service did not have the part and Whirlpool is shipping it directly to me but I do not know when. No tracking info, nothing. Three days and no delivery. Then I must call the repair service back to schedule yet another appointment to install it. Meanwhile, I am paying $13.00 to $20.00 per day for dry ice, not to mention the time I had to take off of work for three service calls - for an appliance I took delivery of on December 21st! Less than 2 months. I am finding out quickly that Whirlpool is very generous with apologies and stingy with results. I should have checked the Whirlpool FB page before making my purchase. But they sure are quick to try and sell you the extended warranty. I am developing a whopping case of buyers remorse.

I purchased Whirlpool top loading washing machine model # WTW57ESVW less than 2 years ago. It stopped working yesterday. I had a trusted professional repairman evaluate it today. The motor needs to be replaced after less than 2 years?! The customer service reps basically said sorry. I should have purchased the extended warranty. Is it not reasonable to trust that a Whirlpool washing machine motor should last more than 2 years.I am very unhappy and very angry that Whirlpool will not stand behind their product. The last customer service rep I spoke to suggested she could send one of their repairmen and replace the motor at a cost to me of $299.00. So, after less than 2 years, I am offered an amount to pay of about half the cost I paid less than 2 years ago for the brand new washing machine. My home is full of Whirlpool appliances. I have been a good and loyal customer for over 30 years. I am very angry and upset with Whirlpool. Please explain to me why it is not reasonable for me to trust and believe that a Whirlpool top loading machine that is well cared for and not abused in any fashion should last longer than 2 years? Is this being a loyal Whirlpool customer gets you, I should have purchased the extended warranty”? We are talking about a motor here, not a fabric or bleach dispenser that breaks. Although, those parts should not break either, there is a big difference from something like that and a motor. Please contact me as soon as possible at either number listed above. Thank you.

I had this stove for less than 3 months and the glass top broke after turning on the stove. Now I tried to find out how to purchase a replacement but it cost as much as a new stove....Ughhhh this is so aggravating.

Whirlpool Cabria Washing Machine hold down switched failed in just 18 months of use. It took the Technician 5 days to serviced and repair our Whirlpool top loading washing machine. The washer is till acting up and stop working unless you put a weight on the top loader cover.

Our burners broke down just 3 months after having purchased a new Whirlpool stove. Then a week later the oven broke also. I want my money back now. Do not purchase any Whirlpool products. Theyre garbage.

Refrigerator Model ED5FVGXWSO2 - After owning it for a couple of years, we decided to do a super cleaning and remove all the shelves. When we took the shelves out, I noticed that the plastic support tracks were all cracked. I called and complained to Whirlpool and of course the fridge was out of warranty but heres the good part - The person on the phone asked me Did you put heavy things on the shelves? OMG My response, trying to think of the heaviest thing possible, was, Like milk cartons and juice? She even said There was likely a bad batch of plastic when the shelves were made. I was a big fan of Whirlpool. Great value etc. but I will never buy from them again. Shelves should last the life of the fridge!

The home I bought a few years ago, had brand new Whirlpool appliances. The oven and range, work great, although it does take my oven seems like a long time to get to temperature. The size of the oven is great, has plenty of room to cook lots and/or large amounts. The range, works really good too. Its a glass top range. The glass is very durable, I find it does not scratch easily. Cleans up well by just using a good glass top cleaner. I do have one of the burners, does make a little noise if used but 4 years in, no issues out of the range or oven.

I bought the Cabrio Whirlpool washer and dryer thinking Whirlpool was the best! Wrong! Worst washer and dryer ever! Washer doesnt get clothes clean! Leaves white residue on dark clothes! Cant put over two blankets in large tub because it gets off balanced! It wont spin water out of delicate clothes done on quick cycle! Doesnt put enough water in to wash anything! Dryer wrinkles clothes so bad I have to iron! Paid $1,200 each! So noisy you cant stay in the house when you are washing! So disappointed I will never buy Whirlpool again!!!

The washer never uses enough water ever. The clothes are not clean and it sucks! The clothes are half dry when agitation is going. The bulky setting doesnt clean the clothes either. Ive tried every detergent on the market to see if it would help. No different results. I paid a lot of money in 2015 for this washer and Ive had bad experiences ever since. No change in my water bill since I have to usually wash clothes and towels twice. I want my money back so I can buy a better washer! Im beyond aggravated! I have looked for my receipt but its been awhile. I did get insurance on it. I bought it at Lowes it should be on my card they scan.

I have had my refrigerator for more than 10 years. It is a standard refrigerator with no extras and I have never had any problems with it. I think things that dont have too many extra built into them are better with not so many things to break down.

Another person with problems called this a giant Whirlpool paperweight and he is so right! I received delivery of a Cabrio WTW7800XW3 washer on December 17, 2011. I had an issue (stopped in the middle of the cycle and flashed the letter “F” on the control panel) with it on January 2nd. I called and scheduled service. I had unplugged the machine and a few days later I replugged it and it started to work, so I cancelled the service call. In March, the problem started again. It just adds a little bit of water and then stops. Since then I have had repairmen out 6 times with 8 new parts installed and the washer still doesnt work. Now, the control panel won’t work. Whirlpool refuses to replace the machine. The repairman says these are the worst machines (any of the ones that are top load and have a clear top) he has ever seen and that I should buy an extended warranty. He says the bearings in the tub wear out among other things. On one of the repair visits, the serviceman found a chewed up pair of baby pajama pants. The machine makes a really loud noise like a jet engine taking off whenever it spins and the clothes are not clean. Whirlpool says that the warranty does not cover replacement of a defective machine. I have since researched the machine and have discovered that there have been problems with this line of machine for years. So, why are they still selling them? I am hoping for a class action suit. The company should stand by their products. I will never purchase a Whirlpool (or any other brand manufactured by Whirlpool) product again. I have had the machine for 4 months and it has been usable for about 2 of them.

Ill be just as responsible as Whirlpool and Nasons has been... I bought my Whirlpool stove less than 2 yrs ago from a reputable business in a nearby community, CROWN POINT, INDIANA! I have had trouble w/ the burner knobs ever since I bought it...just brushing up against them turns them on. Enough gas escapes into the kitchen... I bought knob covers to prevent that (they did NOT work)! So I called the place I bought the stove from and they sent out a repairman...he said there was no fix for it... but that I owed him $69.99 for the service call. And every time I turn the oven on to heat it to bake something you smell gas also... Im almost afraid to use it... 3 nights ago I woke up to the kitchen filled w/ gas...knob covers on but still one was still on a bit... it was a whopping -25 and we had to open windows to clear out the gas... you shouldnt have to check the knobs once youve turned them off. Nor should they come on when you brush by them...when youre not even cooking... Granted I am short but the serviceman said I should move everything I needed to cook w/ closer to me so I didnt have to brush up against the stove... what????? I have cabinets above and all around the stove. What I cant use those cabinets????? Something is terribly wrong w/ the stove and the service... If youre in the market for a new stove, dont buy a Whirlpool and for certain DONT buy anything from NASONS appliances in Crown Point Indiana... They along with whirlpool dont stand behind their product... They told me they never had that complaint before. WRONG, I read it more than once on this site...liars all of them!

We bought our stainless and black Whirlpool stove last month. We love that its black topped, and doesnt show dirt. We love how the oven door seals, and the fast heat. What we do NOT love, is how easily the knobs turn. You barely brush against them, and gas leaking into the kitchen. I called for service. Our guy said yes, they turn easier than most of the stoves he has worked on. He called tech support from my kitchen, and I overheard the guy at the other end. His response was dismissive. I have had gas ovens for 20 years. They have without exception, had a spring type feeling to the knob. This stove has none. I am writing this so that if others are experiencing the same thing, they will see it is not their imagination. Something is wrong with the design of the knobs or some part is missing.

I purchased a Whirlpool refrigerator (model number GX5SHDXVQ02/K02778282) on 9/18/2010. It broke down in 1 year and 8 months; the circuit board control went completely out and ruined all my food. Whirlpool stated I was beyond the 1-year warranty and said there was nothing they would do, except sell me a 1-year warranty for $299. I was at their mercy, so I purchased the warranty for $299 and had the fridge fixed. I would like to be reimbursed at least for the $299 warranty charge. This company should be ashamed of manufacturing such a flimsy product and not standing behind the item to protect their name.

I bought three Whirlpool appliances (fridge, gas dryer and washing machine) from Abt in June 2012, delivered in July 2012. The fridge has not cooled from the moment we plugged it in and because I am out of state from Abt (IL), I have to deal directly with Whirlpool. According to both the Whirlpool customer service rep and her supervisor, if a product is defective from the start, Whirlpools policy is to try and repair it until they determine it to be scrap and only then will they replace/refund. I find this policy appalling since I paid for a good working product, from a company Consumer Reports rates very highly, but was shipped a defective one. Now, I have had two service visits, the second because according to Whirlpool the first technician did not perform the correct service. I have been told not to put anything valuable into my freezer for 5-7 days because most likely I have a coolant leak and the fridge is bad. This is terrible customer service and instead of fixing their error which is the purpose of having customer service, they are quickly building a reputation for a terrible product and terrible service. Good customer service would be replacing the defective fridge as it is clearly their manufacturing issue, taking the item back to their warehouse, repairing it if possible and selling it as reconditioned for a discount. I am noting my suggestion in case any Whirlpool representatives read this website. Another interesting item to note is the gas dryers absorb air from the environment around them so if you do any painting (full room or touch ups), the clothes that come out of the dryer may have a burnt/gas smell for up to 7 days. I am still waiting to hear back from the Whirlpool technician as to my burnt smell problem/resolution, but was told this from a separate service representative so I thought I would pass it on.

Nice refrigerator. Not enough flexibility in shelving adjustment. Same with compartments on doors, flexibility limited. Freezer design is limited. It is not easy to load the freezer with different items.

I bought my home in 2010 and less than a year my Whirlpool microwave started forming a crack near the handle and today August 22nd, my husband and I are looking at it thinking, this is totally coming apart! My Whirlpool refrigerator had issues also. Stopped cooling less than a year, and I am thankful I had a warranty with it. Of course it was still under the manufacturers warranty. Use to be able to depend on WHIRLPOOL. Now you feel like youre in ONE with their products!

Over-the-range microwave hood combo - It is not that it does not work, it just wont shut off! Close the door, it turns on. Touch the side, it turns on. I have walked in the kitchen and found it on! I am afraid it will turn on when I am not home and burn down my house! After reading the poor customer service received by others, I will just replace it.

We bought our Whirlpool washer and dryer set through a PX at Fort Hood, Texas. Took it home, plugged it in and... nothing. Called the service desk, and they sent a repairman right away. He replaced the panel and the water intake fuse (I think? It was a fuse that dealt with the water filling) and then we were off and running. I thought, Great! Now I can wash laundry! After about a couple months, the washer would be so stinking loud in the spin cycle, we would plan outside activities ha ha. Fast forward 2 years, the loud sound continues, but Ive not had any problems. Then, Im washing a load of bed sheets, and just happen to walk past the washer while its spinning... I smelled something HOT and BURNING! Sure enough, it was the washer! I hurried and stopped the spin and unplugged the machine. Opened the door to pull out my sheets, and white smoke comes pouring out of the machine. IT NEARLY STARTED A HOUSE FIRE. I was praising God I smelled the problem. Who knows what would have happened. So I call an appliance shop I trust. They send out a guy who tells me I might as well purchase a new machine because the bearing is bad, and the repair is going to cost $600+. Never again, Whirlpool. Never again. You dont endanger my familys safety in exchange for a quick buck on cheap parts. Ridiculous. And, now that I am reading all these reviews on this website about my washer, I am floored. How is there not a class action lawsuit against this company? Mold and fire-hazards are serious infractions, in my opinion.

My husband and I purchased a Whirlpool water heater from Lowes about three years ago. We have had trouble ever since! The pilot light will not stay lit. We have done everything imaginable to try to repair it. Every time I call Whirlpool, I get the same reply. They email me some instructions on how to repair this piece of crap. I dont understand how they can make a product that they do not stand behind. Whirlpool use to be a reputable company, not anymore! I will never buy another Whirlpool product ever! And I will tell everyone that I come in contact with not to buy from them either. I am also considering filing a lawsuit against them for making such junk! Do not buy Whirlpool water heater.

My husband and I purchased a Whirlpool French-door Refrigerator in Feb. 2014 from Best Buy. We did not purchase a warranty through them (BIG MISTAKE) because everything we heard about Whirlpool was positive, at least through friends and family. 1 year and 6 months later we have NO freezer and their warranty expires a year after purchase date! I called the company and they are no help at all! From all the comments I have read on here, there are few positive results! From now on I will be checking all reviews before I purchase a product again and WILL NEVER buy another whirlpool product again!

We bought this Whirlpool he washer two months ago, and it is the most aggravatingly frustrating washer weve ever had the displeasure to use. There are times when it washes just fine, but I always have to put the mode on deep water wash because the normal mode uses very little water (like its supposed to) but it doesnt clean the clothes. However, most of the time it doesnt wash at all. All the lights will turn off and youll hear this sound and itll drain the water without having been in the wash cycle. Worthless piece of equipment! I prefer the old washer where I have more control. Whirlpool used to be such a good brand, What Is Happening? The new design for their washing machine nowadays generates a lot of complaints, and with good reason (because they suck).

I highly recommend a Whirlpool dishwasher. Ours is a simple model. Cleans well and is quiet. It is 7 years old and I am glad we chose this model. Very happy with Whirlpool. All of our appliances are Whirlpool.

Whirlpool gold series gas oven with Aqua Lift. Very unhappy with this oven. Cons: Aqua Lift technology doesnt work AT ALL (manual cleaning required); stove top hard to clean; 2 front gas burners are super burners which is fine for boiling water, but too hot for regular cooking. Would be better to have one super burner in the middle or back but two up front is way too hot for regular cooking, even on lowest setting; oven cuts out while cooking -- unexplainable how this happens but you really have to watch the oven while cooking to make sure its still on. Pros: large oven so you can cook ginormous turkeys or prime ribs.

French Door model WRF989SEAE01 - Fridge runs very loud after 3 weeks. Ice build up inside of fridge - back left. After numerous repairs, dealer replaced unit with new. Three weeks, loud noise again. After 7 months, the ice maker has quit, the freezer is thawing items, the fridge part is not cold enough (all settings have been boosted). Now Im concerned it is going to completely fail or burn our new house down. All new Whirlpool appliances in new home and this thing is proving to be extremely unreliable. Dealer is now out of loop (gave up) and told us to deal directly with Whirlpool. After 2 units and same issues, it has to be a design flaw.Can anyone start to move on a class action lawsuit or do I wait until it blows up or burns down the house? We are of retirement age, no kids, and our appliances have had NO ABUSE. Another acquaintance has same fridge about 2 years old and it has completely quit.

In less than 4 years the top lid broke at a poorly designed hinge point (+$200). Cabrio washer mercilessly tangles/twists clothes; HE does not totally rinse all detergent from clothing necessitating extra rinse (so much for efficiency); now at 4 year point bearing has gone and machine sounds like a freight train (+$250). Do not recommend this item if this what to look forward to. Called Whirlpool initially about tangling/twisting problem and just got lip service about arranging clothes. Duh, did that already.

Kitchen Aid is Whirlpool - Buyer Beware. 1.5 year old dishwasher Model #KUDS35FXSS8 lost power, repairman came and confirmed it to be the panel control and the part is back ordered 4 weeks out. Expected to come day before Thanksgiving, repairman cannot schedule until part arrives thus no guarantee date of fix. Found part online from AppliancePartsPro.com. They shipped it one day later - fixed dishwasher. Whirlpool will not stand behind part because it did not come from them. I have all the proof that it is a Whirlpool Certified Part from a Appliance Parts Pro. Appears Whirlpool would rather have a broken machine in a home rather than help the customer fix it.

Purchased side-by-side 3 weeks ago. There are 2 adults and 1 kid in my household and the ice maker in the unit does not put out enough ice to handle our small demand, though this was never an issue with the 14 year old Whirlpool that this one replaced! We are using ice trays to supplement what ice the ice maker puts out but the ice trays take up valuable freezer space. Their service reps have inspected it and tell me that it is performing per the specs and when I ask for what the remedy is, there is none... ie. too bad, so sad!! I am apparently on my own with a brand new refrigerator with an ice maker that wont perform up to minimum expectations!

Have a Whirlpool side-by-side with water and ice dispenser on the door. It has lasted over 20 years. It has a large ice maker which makes more than enough ice and it has never broken. Since it is older it does not have gallon depth shelves on the door, but I have never missed not having them there is plenty of internal shelf space.

Bought a New Whirlpool washer. Was ok at first then began to have problems. Called a repairman. Only to find out it was made in Mexico and was a piece of junk!! So in order to fix it the cost was 300 dollars. Then I was told that all the new washers were not so good. My heart broke. If you need a washer youre in for a problem. Look to see where they are made. Theres more new washers in the junkyard than ever. Buyer beware.

I bought a new Whirlpool electric range in the spring of 2008 and purchased the extended warranty from Leons. The oven worked fine for the first three & 1/2 years, but then the bottom element in the oven seemed to have stopped working. The top element would still come on, in an effort to keep the oven at temperature, but was not effective.I called in a repair. The technician showed up, turned the oven on, noted that the bottom element did not come on properly & replaced the motherboard in the control panel with no further diagnosis. The oven worked for approximately 9 months and then the problem recurred. I called in another warranty repair. This time when the technician showed up, he turned the oven on & told me he was going to order a new bottom element, which he installed about a week later, again, with no further diagnosis.Now, here we are again, one month off warranty and 6 mos since the last repair, and again, the bottom element in the oven is not working correctly. I reported the issue & my dissatisfaction to Whirlpool and was basically told, How sad, too bad - hardware components fail and theres nothing we are going to do about it. Seriously? This range is just barely 5 years old and has a history of repeated problems with the bake function - obviously, something is defective in this product.I can see it, if I had not had any problems until this point, but when the same issue keeps coming up & obviously has not been correctly diagnosed and repaired, I would think they would have enough integrity to offer some kind of help or solution. Given the history here, its highly unlikely that Im going to be willing to spend big bucks on another attempted repair that, in all likelihood, will be merely a short term band-aid, so Ill probably have to buy another new range - which I cant really afford right now. Trust me, it will not be a Whirlpool & it will not be from Leons.

We have owned Whirlpool Oven/Range for 3 years, and about 4 times a year, on oven setting over 400 degrees, we get an error message, beeping, and the oven needs to be reset. We also own other Whirpool appliances, and caveat emptor. Buy another brand, please.

We purchased a side by side Whirlpool refrigerator/freezer in June 2011 and have had nothing but problems with this piece of crap appliance. Ice maker has been repaired 3 times, water line clogged twice because of freezing and thawing. Now the machine only cools both sides to 45 degrees F. I am having a repair person come out on Monday to tell me what is wrong but I am so upset with the poor workmanship of this product I dont want to put another dime into the repair. We paid $1100 on this and have paid at least $600 in repairs over the past 4 years!! I agree with all of the other comments on the poor manufacturing choices. We had a GE prior to this and it lasted 10 years but we had the same issues. Repairing it every few years. I am not sure what brand to purchase next. If anyone has a suggestion I would be open to it.

Model GB2FHDXWS04 - This refrigerator dumps water all over the floor at least 1 time a week. We just leave a towel on the floor to absorb it because you never know when it is going to happen. Have removed the stuff and cleaned all of the ice out of the bottom of the fridge but in no time it is back. What a crummy unit. I am going to drill a hole in the bottom of it and put in a drain I guess.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

I have owned a Whirlpool Gold Series Refrigerator for one year and 9 months. During that time I have had 7 repair issues. Each of the past ones took at least two weeks to repair. This past repair has to be redone because the new parts are also bad. The part is now on factory backorder. It will be at least two months for this to be repaired. Whirlpool says its too bad, we just have to deal with being without a working refrigerator for months. Do not buy this product!!! The warranty only means that you are forced to wait months for repairs. They will not replace, refund, or even extend the warranty for all this downtime. You have no recourse with the company.

Less than 1 year ago, I bought a washer and dryer. From the beginning, we have had a water problem and the water only comes cold... no warm water in the normal cycle. They came 6 times to service the machine and they cannot fix it. They said there is nothing is wrong with the machine but it does not wash with warm water in the normal wash cycle. I advise not to buy this product anymore. It is under a warranty so they should fix it or replace it. I am sick and tired of talking to them. They said if we send the service guy then I have to pay for it which is not acceptable because it is under a warranty. If anyone is thinking about buying this product, I advise not to get it and waste money on it.

We purchased a Whirlpool dryer almost three yeas ago. Its a front load, steam dryer--or WAS should I say. Almost a year ago, I was unable to calibrate the control panel (in other words, to change the cycle). Ive been advised by the tech that I need a new control panel $200. Really Whirlpool??? A $500 dryer that lasts two years?

Whirlpool Cabrio Platinum WTW8800 model - In the words of the service technician who came out finally to service the machine. This machine is a piece of crap that should be recalled from the market. It is a low level-water unit that has no agitator ability in it and does not provide enough water to even slightly clean clothes. Everything must be sorted into the smallest loads possible and even then the clothes dont clean because they beehive into a ball and do not agitate. Technician says the machine cannot be fixed and simply recommends it be trashed (it is 1 1/2 years old). Technician recommends going back to front loaders where at least the clothes agitate. Called Whirlpool for help and was told all system are down...duhhhh. Call back in an hour and Good Luck.

I bought a Whirlpool larder fridge 18 months ago. It suddenly stopped working so we got a service engineer up who said there was no gas. He said it would cost 50.00, but with no guarantee it would work afterwards.

11 months after purchasing my Whirlpool 40 Gal Gas Water Heater N40T61-343 I woke to cold water one morning and found the LED flashing 4 times - high temperature shutdown. Unable to find any reset I called Whirlpool and after a couple questions, was sent a replacement control unit. Happily it arrived 2 days later. I was told then that it was because I had residue in the tank. I had no idea how he determined that because none of his questions even touched on that. Anyway, I had hot water.Nearly a year later now to the day and again I have no hot water. This time the pilot burns very weakly when I try to light it and then goes out. After three attempts I get 7 flashes on the LED - Gas Control Valve Failure, part of the same unit I replaced a year ago. Am calling tomorrow since its too late to go through any tech support steps over the phone that Im reading about on this site and seeing on Youtube. Honestly, I didnt replace the last heater because I had nothing better to do than replace parts on this one annually. No, I will not purchase another Whirlpool unit especially after reading all of the similar if not identical issues others are having.

I bought my Cabrio washer about 3.5 years ago. Little after the year, I had to replace the lid because the hinge broke. Then came the F1 code, which I noticed if you turn the machine off for a couple of minutes, it resets itself. About a week ago, it started making a grinding noise and staining the clothes with oil or grease. Transmission problems. I was told by the seller it had a 10 year warranty. I called them up and now I got to foot the bill for a technician to come to my house and tell me what I already know plus labor. Might as well buy a new one. Beware because I believe Kenmore is manufactured by the same company.

I submitted a complaint several days ago about my 3-year old Whirlpool Duet washer not working and costing $550 to fix. I decided to just replace it so my husband unhooked it this morning. We were going to to try to sell it on Craigslist as is. I pulled out the laundry detergent compartment to clean it because I had filled it with detergent and fabric softener the other day. The smell that came from inside the washer where the detergent is dispensed was awful. I looked inside and it was completely filled with mold. I had periodically run the clean cycle with bleach but apparently this did nothing. I am writing this second review to warn people about this. I am going to just trash the washer now and I hope this has not affected our health in any way. For those of you who are thinking about purchasing this washer or one similar, I strongly urge you to stick with the plain old top loader. That is what I am going back to.

We have had a Whirlpool Refrigerator since 2004. We have only had minor issues with the ice maker within the last 3 years. We have had no major problems with this refrigerator. The other minor problems have been the quality of the drawers. After 15 years the plastic started to crack on them.

I love my stove and all of its features. My stove is easy to clean and I Love the self cleaning oven. I have a flat top so that helps when it comes to cleaning, not to mention it makes cooking a breeze. I love all the push buttons and how smart my stove is. I highly recommend my Whirlpool to anyone looking for a great appliance.

These are the worst sets in the world. We bought this set from a hometown store, had them 6 months and all belts on dryer had to have the belt on the dryer replaced, then 2 months later the washing machine went out, so the store did replace both and weve had them about 3 month. The dryer works great so far, the washing machine on the other hand not good at all! The tray where the detergent goes continues to have mold/mildew in it, the clothes come out of wash cycle smelling soured. We have this set inside and we keep our temp set on 67 in our home. There is no excuse for all the problems, not to mention that noise it makes when it washes!! I am completely disgusted!!

Cabrios have an inherent F1 error problem, The company had an initial recall and fixed it once, but problem reoccurred about 14 months later. Company declined to fix it. If there is any type of lemon law on appliances, this would apply. I would not recommend this washer.

Bought a Whirlpool Gas Range model WFG530S0ES0 in Nov 2015. Eleven months into owning it the oven wouldnt heat up. Turns out the motherboard and wiring harness needed replaced. Since it was within a year of purchase, parts and labor were covered. Dec 2018 the same darn thing happened. I called Whirlpool and they basically said, Tough luck, lady. Was I surprised, not in the least. I talked to a supervisor who said that they dont have a single complaint on their Gas Ranges. Did I believe that, not in the least. Whirlpool finally agreed to pay for the parts but not the labor. Whirlpool supervisor said that equipment failure occurs. I said theres a difference between reasonable equipment failure and unreasonable equipment failure. For a 3 year old Whirlpool gas range to failure twice, with the same problem, is unreasonable failure. The supervisor said in such a pleasant voice, Basically too bad for you. Oh and have a Merry Christmas.

I purchased my whirlpool washer on 01/24/2011 and I purchased a 5 yr extended warranty at the time of purchase. My washer broke down. I called the whirlpool co. After 5 mins getting through the phone prompts and another 30 mins on hold I finally spoke with a rep name Ashley who state that there was no account or record of my warranty. She connected me to another department where I spoke with Eva. I was advised that since the company that sold me the warranty was out of business whirlpool would set up an account for me if I faxed the information documenting my original purchase. I faxed the information, waited three days without a response. I called today went through the phone prompts and could not reach the reps I spoke with before. The reps today were not helpful and refused to even try to get me to the reps I spoke with before. I was advised that the previous reps provided inaccurate information.If an appliance comes with a one year warranty and a consumer purchases a 5 yr extended warranty should it be added to the 1 yr or is the first year included in the 5yrs? Wouldnt it only be a 4 yr extended warranty if that were the case? I am very disappointed in the lack of quality of my washer and misrepresentation that was communicated by whirlpool reps. At the very least they should answer the phone promptly and honor the commitment to repair products. This is the case number (**) I was provided the first time I called, but it is not recognized by the reps I spoke with the 2nd time. I was provided 866.368.6478 as a contact# and a fax#. I faxed my receipts to that number as instructed.

I have had trouble with this AccuBake stove since four months after I bought it in 2011. First, the clean cycle would work intermittently then would not ignite to bake, broil warm or clean. All burners would light intermittently. Every time I had trouble, I called the service tech from Homestead Lumber, where I purchased the product from and he could never find anything wrong. Product would work fine whenever he came out. Finally, it acted up in May of this year while the product was still under warranty and while the service tech was here. The tech replaced the circuit board. One month later, Im still having trouble replacing igniter. Four days ago, Im still having trouble. This stove stinks. Right now, I wish I had my $959 back for the stove and wish Whirlpool had it stuck up their butt.

I bought a Whirlpool Duet washer and dryer. The washer is model W9740. Less than a year later, the spin cycle sounds like a jet engine ready for takeoff. I got the extended warranty. A & E service tech showed up. The rear bearing and both halves of the tubs need to be replaced. The cost is $1423.33 to repair. It’s more than the cost of the set. I’m still waiting to see if the warranty covers it. I emailed Whirlpool to let them know I was **. I had a chat with someone named Laura. She disconnected from me after I told her to tell Whirlpool CEO they suck! Never again will I buy a Whirlpool product and I hope they go broke!

Do not waste your valuable dollars on this refrigerator. Not even 5 years old and have had nothing but issues with this fridge. The ice maker quit a few months ago, started leaking water from somewhere behind the wall panels and now the freezer door is frozen shut and the refrigerator section is warmer than the outside air. Did I mention that this refrigerator isnt even 5 years old yet? A piece of junk is a piece of junk and this fridge is a piece of junk!!!

I am 72 years old and this Whirlpool Energy Star HE Washing Machine is just useless. It does not clean clothes properly. It always leaves a stinky washing machine smell which never goes away despite no matter what you do. A completely useless, faulty washing machine! Never ever buy a Whirlpool HE washing machine! Some websites say that you need to buy a washer fan at a cost of $69.99 and attach it to the back of your washing machine as this is the only way you can get rid of the smell. Who has that kind of money? Why is this fan not already included in this washing machine if Whirlpool is aware of the smelly washing machine/smelly clothes problem? This is such a joke! We would like to be reimbursed for our deficient Whirlpool Washing Machine or at the very least, have a recall of this inefficient, poorly designed washing machine. Report them to the Better Business Bureau and anyone else you think can resolve this problem - thanks!! - Unhappy camper

I have had my fridge (model WRX735SDHZ02) for 6 months now and it has never worked properly. All our food was getting frozen so we bought a thermometer to check the temperature inside the fridge and it was showing around 22F. The technician came 4 times and finally said that the fridge couldnt be fixed. He asked me to call Whirlpool since there was nothing else he could do. Every time I have called Whirlpool (6 times already) the wait times have been between 52 minutes to almost 1.5 hours. When I called customer service to tell them the technician said the fridge cant be fixed, Whirlpool said that I had to contact the technician again and schedule another visit. Whirlpool said the technician had to call them from MY home and tell them the fridge cant be fixed. I asked why couldnt the technician just call them now to let them know and why did I have to schedule another visit for that? Whirlpool said it was protocol. Makes absolutely no sense. In a nutshell, its been 6 months and my fridge is still not fixed and Whirlpool is not being helpful. If I could go back I would not buy Whirlpool.

After 32 years of marriage and nothing but Whirlpool (because my mother swore by Whirlpool), that is all we have used. I am so disappointed in the Cabrio washer/dryer set we purchased at Lowes. After 18 months, the dryer just quit. The best part is, we hang clothes out most of the time. It was used one winter, $1400 wasted. We put a cheap Admiral in our second home and spent $500 total and they work fine. I will never ever purchase Whirlpool anything or recommend to anyone. Again, you lost a family tradition.

Our just over 1 year old Whirlpool washer died completely last month (mid May). After calling them and being directed to the extended warranty dept (which we ended up purchasing), a repair guy came out and told us it was our main controller board. Three days later, he returned with the board and nothing. We were then told it was the user interface. They were on backorder until June 5, which means our machine would be out of commission for three weeks. I just received another call informing us the part was now on backorder until June 15. Whirlpool, on what planet is it acceptable for your appliances to be out of commission for six full weeks? Never again.

Electrolux dishwasher model EI24ID50QS - My husband picked this dishwasher after reading all the good reviews. However, after having issues with it, I tried to post my review and it would not post. I think Electrolux is somehow only posting good reviews and leaving out the bad. I had a technician come out to see why it took 6 hours to go through the cycle along with not cleaning the dishes well. He said I needed to run hot water before starting the cycle and that I needed to prewash my dishes before loading.In other words, its not a dishwasher but a sanitizer. Keep in mind that I rinse my dishes before loading, so I dont have food particles stuck dry on my dishes. So, I used his method of running hot water before cycle is started. It works ok when you dont use your kitchen faucet during the dishwashing cycle. However, the minute you use your faucet, the dishwasher runs for 6 hours! This is the worst dishwasher ever! Not to mention, the control panel is so sensitive that if you accidentally touch a cycle to start, you cant get it to cancel. It is ridiculous. Dont buy! It will be your biggest mistake.

Everything Whirlpool that I buy is junk these days! Whirlpool used to be one of the best brands, now, cheap China GARBAGE! My dishwasher will not fill enough to clean the dishes without setting it on pots and pans. Then it runs for hours and uses a ton of electricity! I tested the water fill cut off, after it fills it is not even close to lifting it and the switch works fine. I returned the Whirlpool dehumidifier I bought recently, it was junk as well!

The clothes have a stale and mold smell. The whites like tee shirts and shorts and other whites are a dingy yellowish color. The detergent that was recommended and pellets used every month do not work. I have called and complained several times and the operator said that she had one and it works fine, the other person said to wipe the inside of the washer and leave the door open after each wash and not to store the dirty laundry in the washer till next use. They never explained that you have to run a special pellet through the afresh clean washer cycle. Well, we have tried it every time and the clothes still do not clean and stink bad. We asked them for an exchange and they said no. Is there anything we can do?

We bought a Whirlpool Cabrio 6300 washer based off the salesmans recommendation (not very happy about this). After the warranty ran out, every time in the spin cycle, it makes a sound similar to a piece of metal banging around inside the cylinder during the cycle. Our friends have told us they had a similar experience and for their machine, they found out the bearings were going out. Weve had this machine a total of 3 years. I doubt we ever buy another item from HH Gregg plus will do our investigation on Consumer Buyers digest before we toss any more money out for a washing machine.

They really dont make them like they use to, do they? This Whirlpool Cabrio aka Caprio has given us problems for the past 3 years, weve owned it for 5 years. It doesnt matter how much, or how little clothing you put in this washer machine. It will start going NUTS, Thudding, Banging against the inside of itself, completely out of whack, and then it will show a UL where the time is shown. Every time we do laundry this happens, and we have to stick our hands in the hot water and reorganize the clothes, and pull more and more clothes out till theres only about 3 items of clothing left! This washer is GARBAGE! I advise people to keep away from it. The washer we had in the past lasted us years upon years. These washers of now in days are Crap Garbage. Keep the fancy tech look, and give me the old fashion Knobs ANY DAY! Whirlpool brand is Not what it once was.

I purchased the Whirlpool washer in February 2019 and delivery was in March. As stated in my previous reviews for the manufacturer, and subsequent repair calls, three; from the first time using the washer, it didnt fill properly for the amount of the clothes in it. A piece of paper towel never got wet through the whole wash cycle. I had to resort to raising & lowering the lid numerous times to get to the correct water level; adding water with a container or just pressing down on the switch under the top cover; 4-5 count. Needless to say very time consuming. As for hot water for doing white clothes, forget about it! It seem to me its the same problems with this whirlpool washer thats been happening with most of the other reviewers/purchasers. Did Whirlpool ever think about taken back one of these problem washers and checking it out for themselves? Maybe installing a clear plastic lid to monitor water levels at different wash cycles? Hot water temps when called for? Are these negative reviews ever seen by Whirlpool? Or in the trade is it called.... JOB SECURITY? Any more detail required? Cabo

We purchased the Whirlpool Cabrio washer and dryer duet exclusive to Lowe’s in June 2011. I was immediately dissatisfied and went to Lowe’s. They told me I only had 7 days to return it. They dispatched a service man and he said it was working as it was intended to but I would never be satisfied. If I had dirty clothes from farming, construction, or mining, I should forget about it.” The washer is an eco-friendly model and all the clothes do not get wet. It wrings them out very tight and everything needs to be dried or ironed to get rid of the wrinkles. After 6 visits and lots of stress, I am returning the washer to Lowe’s and they will replace it with a different model. It definitely will not be a Whirlpool. I am very disappointed in the service and response I received from Lowes.

This is the loudest washing machine I have ever had. Sounds like it is grinding. Called Whirlpool and said that is normal. Will never buy another one and will let everyone I know how noisy it is and not buy one.

I have purchased 2 Ikea/Whirlpool ovens in 2011 from Ikea in Canada. I have used the self clean feature on both ovens and both ovens quit completely and the doors stayed locked. This problem is discussed hundreds of times on the internet for Whirlpool, Ikea and Kitchen Aid ovens. Since they are all made by Whirlpool they are all very similar or exactly the same in some cases, as is the problem. I have discussed this with Ikea and they have said they didnt know about the problem but would help to get it fixed to my satisfaction. I have had Whirlpool authorized service repair both ovens but after trying the self clean feature again, same problem.During one of my conversations with an Ikea representative on the phone, she contacted Whirlpool and was told that if the oven was repaired 3 times and deemed by the service technician as unrepairable, Whirlpool would do a buyback. In other words according to Ikea, Whirlpool would take the oven and pay me what I paid for the oven. Well after contacting the authorized service dept (not Whirlpool itself) for the third time, they did some investigation with Whirlpool about the problem. To his and my amazement, Whirlpool has come up with a fix as of October 2013. The technician ordered the new kit and installed it in both ovens. I have since tried the self clean in one oven and this time it worked. For the information of others, Whirlpool has the kit and in it is an instruction sheet with pictures as to how to replace and install all the parts in the kit.I watched the installation, quite a process. From the instruction sheet there is a number on it. Here is the number - w10625529 rev. A 10/13. This is an instruction sheet for Ikea TOD (thermal overload device) service kit. I have looked at many of the service parts diagrams on the internet for many different current models of Ikea, Whirlpool and Kitchen Aid ovens and in most cases almost all the inside parts are the same or very very similar which leads me to the conclusion that this service kit may work in most of these ovens to correct the same problem, but I suggest checking with the appropriate service people before taking my word for it. My observation is that the kit moves the TOD off the top of the metal plate of the oven and onto a new bracket which the tech thought it was to get it further away from heat (this Im not sure of since Im not an expert). He also suggested that this kit may also be designed to allow more air flow around the oven.My only concern after having the self clean feature finally work is the heat produced inside the kitchen cabinet in which the oven is installed. Approximately an hour and a half after turning the self clean on, I felt the side of the cabinet between it and the fridge (open space), and at one area of the wood cabinet I could not hold my hand on the cabinet as it was too very hot. I will be checking the inside of the cabinet for signs of excess heat and if I see any evidence, I will again call the service people. Since the elements were not on when I checked this, I assume the self clean had finished the heat cycle and was in the process of cooling down. When I test the other oven, I will make sure the elements are still on as I can see them thru the glass door. When I checked the temperature of the outside wood cabinet using a laser thermometer, the outside wood registered 64 degrees C or 142 F approximately. Not sure what the inside temperature was as the oven was still in place. Hopefully I will not get a higher reading when the self clean is at its maximum temperature in the cleaning cycle. Will the oven create any problems in the future for the cabinet, I hope not but time will tell. For clarification, the cabinets were built by a kitchen cabinet company using the instruction sheet that came with the ovens. I hope some of this will be of help to some of the hundreds of people who have posted this very same problem on the internet. When you have paid for an appliance you wanted because of the features it came with, it should provide you with what you paid for and not constantly break down. Im lucky as they came with a 5-year warranty so it hasnt cost me anything yet and hopefully wont in the future. Good luck to all in getting this resolved for all of you.

I purchased my Whirlpool refrigerator last Summer and so far I’ve had no issues, no probs! I love the energy efficient refrigerator along with its easy settings and options to use a ice maker. Wouldn’t trade my Whirlpool for any other brand!

I purchased this washer 3 years ago. At year 2, I had to replace the RPS part. The codes that appear represent 2 different issues as well: one being the RPS part and also for the control panel. In less than 1 year since this replacement, it is broken again! The clothes do not get very clean. You cant soak whites in hot water and bleach (it drains after 5 minutes if you stop it). You have to use the bulky setting to get enough water to actually wash your clothes. If you get too much detergent, your clothes comes out crunchy feeling even with the extra rinse.I thought this Whirlpool product would be great since my 22 year old dishwasher is a Whirlpool and still works but as the old saying goes... They dont make them to last like they used to. To say this washer is a POS Lemon is an understatement! I also have the companion dryer and it is starting to have problems including the door latch breaking into pieces. I will never purchase another Whirlpool product again! I have been told that Kenmore and Maytag are also under the Whirlpool umbrella so Im not sure what I will buy next. My recommendation: DO NOT BUY THESE PRODUCTS!!!

I purchased a Whirlpool 3-door refrigerator with the freezer on the bottom on 8/17/12. Within 4 days, the ice maker stopped working. It took two days for the repairman to come out and fix it. So all is well with that. Less than 2 weeks later, the refrigerator isnt cooling. Several days later, the repairman came and determined it was the evaporator fan motor and clutch. The parts were back-ordered for 10 days. Parts came in 2 more days before he can come out and install them. He realized they sent the wrong parts. Another week went by, then he came and replaced the fan motor, which is now making an ear-piercing buzzing sound. He came back a week later and said it needed a gasket, which is back-ordered. In the meantime, he put some stick on insulation around the unit. Not much help. Another week went by, and the gasket showed up. It is still making a high-pitched whining sound. He said it was the compressor. Whatever! I hate the refrigerator. The sound is one that just grates on your nerves and you can hear it in all the rooms surrounding the kitchen! A repairman has to deem it unrepairable before they will even consider replacing it. They consider it fixed. What about my bleeding ears! I just want it gone! I am so disappointed. I thought Whirlpool was a good product with a solid reputation. I have a $2300 noise maker! Is there a class action lawsuit?!

I have a two year old Whirlpool dishwasher. The soap dispenser cover broke shortly after the warranty ran out. It cost 100.00 for repairs. A year later, it broke again. I sent a letter and the part to the CEO of Whirlpool. They sent a repairmen to fix it free of charge. When you have a problem with a Whirlpool product go to the head of the company. If they get enough calls they will make better parts. Call 1-269-759-6919. Write a letter, return request receipt. It takes a little effort, but it helps a lot of people.

Purchased this set in January of this year 2016. The loudness of this machine struck me first along with the constant banging of the pipes in the basement when filling with warm water. The agitator is very loud. Thought I was trading up from a 10 year old Whirlpool front loader set. There is hardly any water in the washer when running a full load. I take clothes out that are not only a twisted tight mess but in some spots are not even wet!!! The dark clothes inevitably need to be rewashed because there is white residue on them!!! I have used the pods and liquid and it doesnt seem to matter, happens with both. Customer service has no answers and say theyve never heard this before.How can this washer wash clothes when there is no water and little if any movement of clothes??? And how is it that we are all saying the same exact things and Whirlpool is not being held accountable??? I DONATED my working fine set to a dog rescue and am now stuck with a brand new machine that works PERFECTLY HORRIBLY. So who is watching you Whirlpool???

We purchased this washer and dryer new in 2011. Have repaired door to washer twice. New doors total cost $500.00 each time. Now it is cracked yet again and the dryer door has to be adjusted. The temp does not work right. Have to do minimum of 2 cycles for drying. Very unhappy. We may as well buy a new set of another make. Tired of the expensive repairs.

I have enjoyed my stove for 16 yrs, it is very reliable and easy to use. The heating elements work well and heats up quickly. During this time I have not had any repair done. The areas of improvement that needs to be implemented is the inter glass that is installed at the front looking into the oven. In order to clean you have to take the front door off which is very difficult to put back together.

Ive had this refrigerator at an upscale rent house for 2.5 years. I have invested over $1,000 in repairs, all of which happened after the one year warranty was up. Now I have to replace it completely because it makes a loud noise that my tenants cant stand. Dont buy this unit.

6 months after we moved into our new house our Whirlpool refrigerator froze up and we had it repaired. 6 months later the same thing. Still under warranty. 6 months later the same thing. I asked for a new refrigerator. They said it could not be replaced unless it was deemed unrepairable!!!! Now after 2 years with the same problem every 6 months I get in contact with corporate and advised to get an extended warranty because “they don’t replace refrigerators”. So an extended warranty will cost $350 this year and increases every year because the fridge is over 1 year old. Ok so I am paying to have it repaired with their so called warranty!!! We went to an appliance store and purchased a new not Whirlpool refrigerator. Will never buy anything Whirlpool again and let all my friends and family know of my experience.

I purchased this refrigerator, approximately 3 yrs. ago. Right away the top crisper broke. I have put up with this broken crisper only to have broken the PLASTIC lips that hold the crisper to the top shelf. Piece of junk. I looked to order a new crisper but way to expensive so I just suffered thru. I cant even use it anymore as I cannot open or close it without it falling onto the bottom crisper. Would like to throw the thing out, but cannot afford another one. IT WILL NOT BE A WHIRLPOOL!!!

I purchased an 80-gallon electric water heater in 2009 with a Lifetime warranty. When the unit failed in 2021, I was told that Whirlpool no longer manufactures an 80-gallon tank. I was provided an R/A# and was told that Lowes should honor it with a like-kind replacement unit. Lowes originally suggested I order an AO Smith Hybrid online, (at my expense), return my old tank, and they would reimburse my account. When I went back to confirm this offer, it was adjusted to a $200 credit (suggesting that was the value at the time of purchase). Later, Lowes again adjusted their offer to cover $650 toward a replacement 50-gallon tank with a 6-year warranty and 30-gallons less capacity. Other manufactures do produce 80-gallon tanks and Lowes does have AO Smith tanks available online only. I would have to pay the difference beyond the $650 offer.I purchased the original 80-gallon tank because I need the capacity and I assumed the Lifetime warranty would allow for an even trade if/when something went wrong. The proper solution would be for Whirlpool/Lowes to offer a replacement value for any comparable 80-gallon tank regardless of the manufacturer. Currently, similar tanks average $1300-1500. (Westinghouse w/ Lifetime warranty at Home Depot). Lowes should also be able to order the tank for in-store delivery as opposed to having me order online at my own expense. Meanwhile, the current tank is leaking and will soon be out of service...

The interior has an excellent layout and accommodates our oversized dishes. The racks operate with ease. The outside appearance is tastefully done and the noise level when in operation is very low compared to other brands we have owned. We are pleased with the overall operation of this unit and would recommend it to others.