4 year old gas range, used self clean mode yesterday, for first time, upon completion opened oven door, not very clean and found 1/2 moon shaped raised crack in center of oven floor. Customer service insisting repair tech must come at cost of $60.00 to determine cause. I believe this is manufacturing defect, that they are not willing to admit. Offered big discount on new range. NO MORE WHIRLPOOL FOR ME!!!

The oven steam cleans the oven but it only cleans the bottom, not the sides, back or door. They dont recommend oven cleaner so how do you clean it? My oven is a year old and looks like its never been cleaned. You would be better off with non cleaning oven and using oven cleaner. It would be less work. Horrible stove.

My issue is I believe that Whirlpool should pay for my tub and bearing part because the washing is only 16 months old. Because it went over the one-year warranty by four months, I shouldnt have to buy this part considering it is such a big break for such a young washer. Please advise if Whirlpool will assist me with this issue.

We purchased a gas range (Whirlpool AccuBake model # mfgxfg361lvt1 serial ry1810956) a few years ago and have been very unhappy with the gray grids that it came with. We wrote to you about how we should clean them and you recommended heavy-duty degreaser, pin31552a and gas grate & grill cleaner, pin3167a, which we purchased. Neither worked, even with heavy elbow grease. We are very upset. We have purchased Whirlpool products all of our life and would like an answer or some type of explanation. If possible, can we get the grids in black? We try our best to keep these things clean and this is a very bad patten.

I couldnt wait to get a front loader and hated it. As soon as I saved up enough money, I bought the water saver Whirlpool top loader. I love it! The clothes get cleaner and dont smell musty. Im very happy with whirlpool.

Why am I not surprised by this stupid American company? I purchased a brand new fridge in June this year and for the last 5 months I have had about 20 different technician visits by five different technicians who changed almost everything you could possibly imagine - evaporator, control, sensor, compressor, display, etc., etc. And the company still refused to take any responsibilities. They kept telling me that more inspection was needed EVEN AFTER all the technicians said there was NOTHING THEY COULD DO. After having to yell at them for about an hour, they finally realized they had to issue me a new fridge. What a piece of crap they are. Even then when I called back about the exchange, they pretended they could not find my file. WTF??? They really tried EVERYTHING they could not to issue an exchange. Wow. What an incredible company and its customer service. I will never, ever buy another American product - nothing complicated with computerized parts anyway. They are NOT capable of producing such complex machines. They should stick with toasters or juicers - lol. Stupid Americans. LG and Samsung all the way baby!!! ** you Whirlpool.

I bought Whirlpool dishwasher (silver, Golden Series), after one year it just stopped for nothing and the circuit controller failed with error code E2/F2. So it was expensive but turned out to be totally unreliable. I had to pay $200 to get extended warranty and still waiting for the parts!!! Worst experience ever (uh Golden Series, for me it is Plastic Series). Will never buy any product from this company again.

This washer is an extremely poor choice if you wash clothes. It has so little water it does not dissolve HE detergent, Clorox 2, or OXI Clean. After even one wash it does not clean your laundry. If you choose to wash your sheets (even though there is a sheets and deep washer setting) its a joke. I could do better by washing things in the tub. I realize its a low usage water washer but you cannot even add more water unless you put it in with a bucket.

Its now Nov 8 and Ive been officially dealing with this issue since Sept 26. This washer was installed in a new home. After less than 10 loads, my washer stopped draining and I was left with a load of towel soup for over a week while waiting for a service call. I still have the same defective non functioning washer sitting in my home and have been unable to do laundry at home in all that time. So far Ive spoken with 2 customer service representatives. The first was incapable of scheduling a service call. She clearly did not understand how to operate the database used for scheduling. I was finally able to schedule appointment on my own but had to wait a week before the technician was able to come by. It was determined that either the latch mechanism or the mother board or both are defective from the factory.The second was just plain dismissive and completely unhelpful. I sat on hold for about an hour each time before getting to speak to a person. Ive also received two canned emails in response to my poor review of this washer on the Whirlpool website. They basically blame COVID for the delays and state the parts delivery should take 3-4 weeks. I was originally told 14 working days for delivery of the parts. We are already past both deadline with no end in sight. At this point, Id like the defective washer replaced rather than repaired. And for the record, this was a new washer (less that one month old) installed in a new house that now stinks to high heaven because slimy, scummy water that will not drain out has been there since September 26. Id really just like for someone at Whirlpool to honestly care about this and take a moment to address this issue.

I had my old agitating washer for 8 yrs that went out. I liked Whirlpool so decide to try their washer. Found the Cabrio washer (SWS5000WO) and thought without the agitator it would give me more room for clothes to wash better. Boy was I wrong, no matter what cycle or what size load it is off balance on the very first spin. I have to stay near by to stop the washer before the first spin adjust the load and start over again. Jeans and towels are impossible to clean. It throws the tub so bad it has pushed the side out. I have checked the balancing rods and they are fine. After reading other complaints realize the Cabrio washers are terrible. I will be looking for a refurbished washer with an agitator and doubt I will buy Whirlpool again. They should have a recall on these machines. They are terrible.

Bought this fridge at Best Buy because it was beautiful and thought it would go perfect in my new home. We allowed the fridge to regulate for 72 hours (even though it only needs 24) and it didnt cool properly or make ice. 3 calls later to the 800 number (along with three scheduled repair visits) and Im getting the run-around. 1st excuse was that I needed to order parts. 2nd excuse was that it was a bad sensor due to the manufacturer. The 3rd excuse was that the fridge door wasnt aligned properly, thus not sealing properly and not allowing the fridge to regulate, which causes it to freeze over. My ice maker also hasnt worked once in this entire ordeal. The issue still isnt resolved and I am vowing to never spend thousands of dollars on this brand again. Spare yourself the headache and go with a less glitzy, more trusted brand.

We remodeled our house 5 years ago, and bought all new GE/Whirlpool appliances (washer, dryer, microwave, refrigerator, oven, stove top, and water heater), and weve just passed the 5 year mark, and each appliance is failing one by one.

After having my Whirlpool side by side refrigerator ice maker replaced 4 TIMES in 10 years, I finally found a permanent fix for it: an Igloo counter top ice maker for around half the price of a replacement Whirlpool ice maker. Unlike the Whirlpool ice maker, it makes ice. I promptly removed the Whirlpool ice maker FOR THE LAST TIME, and sent it to the dump, where it belongs. Goodbye Whirlpool! If that is the best you can produce, you will not receive any more of my hard earned money!

54 weeks ago, I purchased a Whirlpool Duet Washer & Dryer. The first time I used the washer, it flooded my laundry room. After some grief, it was replaced with a second Duet washer some 53.5 weeks ago. Yesterday, that washer, 10 days past the 1-year warranty, failed. It gives error messages F06/E01 and wont complete a cycle. Calls to Whirlpool resulted in a refusal to acknowledge any product responsibility (out of warranty) but offers of extending the warranty for the cost of repair. I will never buy another Whirlpool product and will actively encourage any other consumer to shop elsewhere.

I just experienced the same problem with my top load Whirlpool Cabrio WTW7800XWO. It is 3 years old, and I paid $900 for it. The plastic that surrounds the glass top is broken around the hinge. I had to pay $75 for American Home Shield to diagnose this and now I am waiting for them to order the replacement part - the part is around $190 from Sears or 245 from Partselect.com. What a pain. PLUS, the machine is so noisy and starts to vibrate loudly toward the end of the cycle.

The dishwasher is quiet and seems to clean most all of the dishes even when there is dried on food remnants. Multiple cycles that allow for light, medium and heavy cleaning. Also the ability for air dry and minimum use of water. The size is appropriate for normal amount of dishes, pots, pans, etc. Stainless steel front with most of the controls hidden. I have always had good luck with Whirlpool products, with this dishwasher continuing with being a quality product for the amount of money spent.

Thrilled with my first experience (9 years now) with my Whirlpool glass-top range/oven. Truly LOVE the modern look of glass cooking surface which cleans up like a dream! NO harsh abrasives needed, always WIPES shiny and beautiful. All-electric...no stinky gas fumes. Wonderful features... Computer controls, SELF-CLEANING OVEN. Now, if only it would do the prep-work.

As described in many similar instances found on numerous complaint boards (including this one), Whirlpool has defective over the range microwave convection ovens (model # GMH6185XVS) with faulty magnatrons. I have had the exact same experience with a new product failing at 16 months (the first time) and within 6 months failing again. Whirlpool is not concerned about their consumers, only their money. They are more than happy to sell an extended warranty, but are not willing to work with customers that have lemon products.I tried working with Whirlpool customer support with little assistance other than to offer to sell me a $250 extended warranty. I additionally filed a complaint with the Better Business Bureau concerning Whirlpool to include over 10 pages in documentation with numerous people reporting this same complaint. Whirlpool is still not willing to acknowledge they have faulty or defective components in their product and so generously offered to pay for the replacement component (only - not the service to repair it).I spent $600 on this unit new, $163 to repair it the first time (at 16 months old) and no doubt it will cost me an additional $163 to repair it again (not even 6 months after the first repair). I am not willing to continue to throw good money after bad on a defective unit. For the cost of the repairs and their extended warranty, it is cheaper to buy a new unit from a different manufacturer.It is clear from this site (in addition to numerous others) that Whirlpool has a definite quality problem - both in products and service!

We bought our stainless and black Whirlpool stove last month. We love that its black topped, and doesnt show dirt. We love how the oven door seals, and the fast heat. What we do NOT love, is how easily the knobs turn. You barely brush against them, and gas leaking into the kitchen. I called for service. Our guy said yes, they turn easier than most of the stoves he has worked on. He called tech support from my kitchen, and I overheard the guy at the other end. His response was dismissive. I have had gas ovens for 20 years. They have without exception, had a spring type feeling to the knob. This stove has none. I am writing this so that if others are experiencing the same thing, they will see it is not their imagination. Something is wrong with the design of the knobs or some part is missing.

Bought brand new stove, had issues from day 1, called them after TWO different repair companies came looked at it and said it was a melon, Whirlpool wanted to send a third repair company. Started dealing with this in September, its now end of December and Im still waiting for replacement stove.

Purchased gas water heater from Lowes in 2012. Had no problems until July 2018. Its under warranty but have had to replace the control valve completely and the burner 5 times and it still is not fixed. Dont waste your money. Buy something else.

I am experiencing problems with keeping my pilot lit too. I checked the screen and this is not the issue. I have just returned from Lowes where I purchased the water heater and they informed me Whirlpool supplied kits for this issue and it was widespread. They mentioned a class action and went on to tell me they and all surrounding Lowes stores are out of the free kit and arent expecting anymore. Am I to feel lucky my water heater water didnt fail sooner only to feel unlucky all of the free repair kits are now gone? Lowes provided me with the Whirlpool phone number for help and they have just informed me it will cost me $35.44 plus shipping. I now see how widespread this problem is. This isnt right. I am very disappointed in the handling of this known problem! What is my next course of action?

Am posting in regards to a brand new dishwasher that I purchased the first part of February 2020 from Menards. The dishwasher I bought is Model # WDT730PAHB and Serial # F94519386. I had the dishwasher 10 days and it stopped working after running only two times. I checked the breaker box and all electrical connections to the machine and it was getting electricity, but would not turn on at all. I called the store to return it and they only have a 7 day return policy. Since then Whirlpool has been contacted and I have had two service calls from Whirlpool. The mother board has been replaced (which I waited two weeks for the part & five hours for a service man) and still it will not come on. Now I am waiting on a wire harness, ordered on March 4th or 5th and still not here. I completely understand wanting to fix a broken machine, however this was a new dishwasher that only worked for 2 washes. I have now been without a dishwasher for almost 2 months, which in light if our current world situation isnt a huge deal, however this is a time when sanitation is very important. I feel like Whirlpool should offer to replace my new machine with a new machine and not something that is refurbished. At this point it is costing more to repair this machine than to just replace it. Every time I call Whirlpool I get the line of we have to repair it. Give me a break. Take care of your customers!!?? #neverbuyawhirpoolproduct

Purchased new Whirlpool 2-door, side by side refrigerator from Standards store in December 2010 for close to TT$10,000. For 2-3 years, it made a very loud noise. Each time it cut off that disturbed my peace and quiet. I complained, to no avail. In early 2015 or thereabouts I began experiencing severe warming problems in the non-freezer compartment and, since that time, I have suffered large losses from spoilage. The warming coincides with over-freezing (icicles, thick frost formation and whirling, dense cold air) in the freezer compartment and icing up of the vents in the non-freezer section. Moreover, the cool air flows from the top vent only when the freezer door is left open. Since that time Ive only been able to marginally cool the non-freezer section by unplugging for up to an entire day, at least once per week. I believe this is a manufacturing flaw rendering the non-freezer section not fit for its purpose although it manifested itself sometime after purchase. My prior experience with another brand has been totally different (13 years and still working). It is totally frustrating. It is also unsafe since spoilage is sometimes difficult to detect. Here, we have to deal with the seller and that is often a hopeless situation, particularly outside of the warranty, as has been my experience with another household appliance. Ive been advised by independent technicians who reportedly have encountered this problem that the solution lies in boring a hole connecting the two compartments which then enables efficient cooling of the non-freezer compartment. Quite frankly, I would like to have the refrigerator replaced despite the fact that it is outside of the warranty.

In less than 4 years the top lid broke at a poorly designed hinge point (+$200). Cabrio washer mercilessly tangles/twists clothes; HE does not totally rinse all detergent from clothing necessitating extra rinse (so much for efficiency); now at 4 year point bearing has gone and machine sounds like a freight train (+$250). Do not recommend this item if this what to look forward to. Called Whirlpool initially about tangling/twisting problem and just got lip service about arranging clothes. Duh, did that already.

Whirlpool Cabrio - This washer and dryer have been garbage since the beginning. It does not clean soiled clothes and the dryer (gas) has always taken forever to dry a load. I have always had GE prior to this. I will never purchase another Whirlpool product again. We even purchased the extended warranty and the repair guy was out yet again and said it is not repairable. Now we are without a washer for 5+ days and its going to be reviewed. Review? I want my money back. Theres a lemon law for cars, there should be one for these machines.

My machine has been ripping clothes for a few years but I thought, initially, that it was a snap, zipper or hook causing the problem. I recently got fed up and found this: **. It makes it pretty clear that it is a manufacturing defect. I called their customer service centre and spoke to a supervisor that told me it is normal wear and tear and that perhaps the glass in the door had worn out. Yes, thats right, she said maybe the glass has worn out.They are offering ZERO assistance in what would be a $500+ repair for me. Admittedly, my machine is five years old and out of warranty, but to me, when the repair is to install an entirely new style of door so that the clothes no longer get caught underneath, it is a defect. 43 different models of their machines are included in this issue and it was identified in 2012, a year before my machine was made. Why didnt they correct it before that?

I purchased this Refrigerator Model #wrb322dmb, bottom freezer, 21cu ft. last year on July 3, 2015. In September I noticed rust spots on the top door. I called Home Depot where I purchased and they directed me to Whirlpool. I did purchase an extended warranty with Home Depot. Whirlpool did replace the top door. Thought that took care of it. Today one year and two weeks out of warranty, I again notice rust on both doors. Called Whirlpool. They said too bad out of warranty, not considering I had a previous report of this very same issue. So since I am very unsatisfied with this result and the fact that an expensive product is rusting, I decided to share to try to prevent someone getting stuck. Stainless steel is not supposed to rust which leads me to believe that it is not Stainless steel, but a Stainless Steel finish and not a very good one. So I am stuck with a rusting $1200.00 refrigerator only after one year. I have always purchased Whirlpool, but no more. They lost a 40-year customer. I have always bought American made but no wonder people are not buying American made any longer. TO SUM IT UP WHIRLPOOL STAINLESS STEEL APPLIANCES RUST! DO NOT BUY!

Replaced an old water heater with new Whirlpool 40 gal. short natural gas water heater N40561-403. Good instruction, very clear directions. Also purchased at Lowes was a Utilitech universal gas water heater installation kit. The nipples provided in the kit screwed very loosely into cold water inlet and hot water outlet. I used teflon tape and finished the installation. When I turned the water on both fittings leaked. I couldnt tighten the nipples any further so I shut the water off and drained the tank a bit and reinstalled the nipples with at least 8-9 wraps of teflon tape. Im not sure if that is normal or if nipples were under size or if the cold water inlet and hot water outlet were larger dia. than normal. FYI.

My NEW Whirlpool top loader just stopped working. I bought it in June 2015. The extended warranty I purchased ended at the end of June of this year. Guess what happened a few weeks later? The thing died. Seems totally fishy! My parents washing machine lasted 20 years. Why does this one die weeks after the warranty expired?

I bought this Whirlpool Cabrio from Lowes June 2016. It doesnt wash the clothes at all, always detergent marks or clothes just not clean. Now it is making some loud noise during washing cycles (sounds like motor is dying) and I now I have to wait for someone to come out and fix it during a 8-5 time span, so I have to take off work. I will never buy whirlpool again. So very unsatisfied!

I have bought Whirlpool washer (small size) and dryer less than 2 years ago. The washer started to develop an error f6, as it shown. Finally, machine could not work as far as warranty was expired. The Sears technician made very quick overlook and told that probably engine was gone and advised to buy a new machine, as repairing parts are not available in Canada. He charged me 96 dollars for that.

Does the CEO know you do not stand behind your products? My washer is not even a year old and cost about $400.00. And you have stuck about $1800.00 into repairs instead of replacing a lemon washer! The washer had problems the 2nd month I owned it and you stuck a new clutch in out. Now just about everything replaced, it still does not work so I will order more parts. This is ridiculous. I would love to hear back from your CEO and would like to be reimbursed for 5 days of pay to take off and wait for repair men, laundry mat fees, etc!

It was not a good experience after I purchased a Whirlpool washer in Feb 2014. I have been going to Laundromat 5 months since I found the door did not able to secure. I reported in January 2015 and technicians from 3 different contractors made more than 10 visits for checking and replacing parts. Not only nothing gets done, I also missed work for all these days. Then I escalated to the Supervisor, ** and Miss ** in Executive Office of North American Region. Both of them are very nice that they understand the situation and how frustrate it is. Finally, ** said Whirlpool would replace it. ** told me that I should get phone call from H.H. Gregg within 48 hours. However, it has been two weeks and seems no one care. In this three days memorial weekend, I still need to go to Laundromat while they are enjoying BBQ with their friends and families. I dont know how long it take to replace it.

Whirlpool Cabrio TLWasher purchased 2011. Doesnt drain, no spin, inconsistent cycling, poor washing action....wont even attempt to repair, in light of reading product reviews and consumer experiences with this washing machine- $600 junk.

New whirlpool washing machine 2016 - This washer is supposed to be smart, but it NEVER fills up with water! I always have to fill a bucket with water and throw it in the washing machine. My clothes do not come out smelling fresh and its not the detergent to blame, its the washer! Im so disappointed with this product. Whirlpool should stop making products.

At least three times a week the washing machine does not wring the water out of the clothes. The best Maytag wants to offer is to extend the warranty for one year. So washers are supposed to last for 2 years? Will never purchase a Maytag again!!!

Purchased my Whirlpool Duet front load washer WFW9150WW00 new in 2010. Also purchased extended warranty. After four years, just before my extended warranty was up, the entire inside needed replacing (drums, bearings). Now at only five years old, it keeps making a beeping noise in middle of wash cycle and wont continue working. Serviceman was told by a Whirlpool tech. that it could be two things, one being the door jamb, the other being the control panel. Door jamb was fine. Ordered new control panel ($240), had it installed and yet the washing machine still keeps beeping and doing the same thing. The serviceman doesnt know what else it could be. So, I am forced to return the part and purchase a new washing machine. I would never recommend Whirlpool to anyone!

My Whirlpool oven (Model WFG505M0BS0) stopped working - the bottom oven part (the top burners were OK), the display on top functioned normally, but no fire came on. I called Whirlpool, and then I accessed Whirlpool online and scheduled service with their official service representative - Flamingo Appliance Service ** for September 9, 2020. When the repairman arrived on 09-09-2020, he opened up the stove and checked it, and he told me that a computer part needs to be replaced, as well as the igniter, and the cost would be between $400.00 and $600.00 (I dont remember the exact amount), I told SEVERAL times, maybe its just the igniter (for which the cost would less than $100.00 AND already included in the $134.95), but he insisted that the computer needed to be replaced, I did not like the way he explained it to me, it did not make sense.After that I was planning to buy a new stove, as the repair was too high. But, I decided to try to change the igniter myself before getting rid of the stove (the igniter cost was $21.00). I just got the igniter recently, and installed it, with help from YouTube, and what do you? THE STOVE IS WORKING!!! This is fraud!!! FLAMINGO APPLIANCE SERVICE ARE THIEVES, AND BY ASSOCIATION, WHIRLPOOL, WHOM THEY REPRESENT ARE THIEVES ALSO. I shall publicize to the best of my abilities: NOT TO BUY WHIRLPOOL PRODUCTS!!! This was not a mistake!!! This is the way they rip people off!! Either by paying exorbitant amounts for unnecessary repairs, or by buying new appliances when the old ones are still good. Dont buy Whirlpool!!! Dont use Flamingo Appliance Service. Theyre both fraudsters.

I’ve had my washer and dryer for a long time and it has been okay and it’s time to update. It has had its up and down and I may get another just after a while they are outdated and better appliances come along. Smarter people are making smarter things.

2 loads of clothes and it is broke. I tried to call Whirlpool to no avail. So I called Costco where I bought this machine. They at least talked to me. Promise to get a hold of me tomorrow. Brand new (2 days old) and this happened. Didnt even finish the second load.

Frontload Sport Duet ht: After just 8 years, bearing out on washing machine. Just had repairman out. Cost more to fix than what I purchased it for. I bought both the washer and dryer, thus the reason for the duet. So now I have a good dryer and lost its mate. I am not going to purchase another one. Very disappointed. I will not be purchasing any more Whirlpool products in the future. Off to the laundromat.

Whirlpool Washer W10740628A - So disappointed! I have made adjustments for a year trying to get clean clothes from this machine. Compared to my previous machine which wore out, I now use more water because only deep water wash provides enough water; I always choose double rinse because if the machine does not clean, I do not trust it to rinse effectively either. I use more Tide than previously per wash; I use more Clorox than previously per wash. Everything from tea towels to heavily soiled jeans show stains and soils after washing. Instructions say not to spread the item in the washer but allow it to stack on itself, so twisted and tangled wet clothes are the result. I try to soak and scrub all visible dirt before I start the machine now; additionally, I use a mop or plunger or my hands to thoroughly immerse the clothes in the washer, somewhat like my mother did in 1950s. What on earth is this about and what is the buyer supposed to do???

Mid-sized, mid-range dishwasher. It is noisy, not quiet at all, and we must speak quite loud over it if we want to be heard. The wash cycle is quite long... not really a water saver.

Quiet running, does a great job cleaning and drying the dishes, experienced some cloudiness on the glassware but found that if I position them in the middle of the upper rack that issue was solved.

We have had our dishwasher for over ten years and have had no problems. Its been very reliable. Its a free standing unit on wheels with a butcher block top as we dont have room in the cabinets for a built in. All you have to do is roll it over to the sink and plug it in and hook up the water line which has a quick disconnect. The male half always stays on the faucet.

I purchased a Whirlpool bottom freezer refrigerator for my wifes birthday because my old one was old, ugly, rusted and didnt match. Since she likes to cook, it was her dream in life to have a stainless steel refrigerator with a freezer on the bottom. At the time, it was the only kind that would fit into spot. One year ago, first the ice maker leaked causing water to spill onto the floor. Since I am a mechanical whiz I bought the part for about $30 and fixed it myself. We were happy.After two years, the freezer worked, but the refrigerator part went warm. I had a repairman replace the control box for $100. It still didnt work. We called Whirlpool, and they said the warranty expired, but as a courtesy, would charge me $95 for a service call. That was not acceptable. They told my wife that the products were man-made and are prone to mistakes. I replaced the fan myself for $100, but drove a total of two hours to get the part since it was rare. It worked great. For one and a half weeks, we were happy. Then the refrigerator and freezer DIED. Only the light and the fan worked. We bought a old school used GE top freezer, but at least it is stainless steel. We lost $2000 in two years and the people at Whirlpool refuse to do anything about it because it isnt their problem. Worst refrigerator EVER!!! !

The problem started with an error code F3F1 on dryer. Called A & E Factory Service who is company that are certified Whirlpool technicians. They have been out 7 times, March 26, April 1, April 8, April 13, April 27, May 5 and May 12. During those times they ordered and replaced the main control board 3 times and a thermistor for which we paid for parts and labor. The company now says they think we have a lemon and we are supposed to hear back within 48 hours whether we are going to be refunded a total of $504.48 we have advanced for repairs less the service call. They referred us back to Whirlpool and said they would no longer come out as the dryer cannot be repaired! Talked to Whirlpool customer service that says we didnt have an extended warranty and there is nothing they can or will do. This dryer was purchased on 12/31/11. They took the position that because there is no recall for defective parts for this model, there is nothing they will do. Attached is our purchase receipt and all service invoices regarding this matter.

Purchased on 7/9/18, was alerted of gas leak on 11/24/18, gas company had shut off gas to the unit. After finally getting through to their customer service in December, they scheduled an inspection with a local repair company they contract. It is now January 15, 2019 and I still have not had any resolve to this. Whirlpool is washing their hands of any responsibility, and doing nothing to help find a solution for a defective burned out piece in their oven, which the repair tech said he’s only seen in units over 10 years old. I do not feel confident or safe about this range. I bought this new from Best Buy, 4.5 months of having this in my home, after 1 oven use this happens.

I purchased my Whirlpool refrigerator from Whirlpool guest system (online) in 2010 for around $1,160. Recently, it stopped dispensing water from the dispenser. I called the Whirlpool certified A&E serviceman to repair the dispenser. He concluded that the water line is frozen inside the door. He also stated that such issues with the door shouldnt happen for at least 10 years. He gave me a bill of $920 to replace the door. I called Whirlpool and they declined to pay for the repair as it is out of warranty. I feel that they sold me a faulty refrigerator and they should pay for this expensive repair. With $920, I can probably pay for a new refrigerator (not Whirlpool, of course). I am completely disappointed by Whirlpools customer service and poor quality of their product. This company, I believe, is more interested in selling crappy products, make profit and not provide good customer service. Shame on you!

I purchased Whirlpool Slide-In 30 Gas SS Conventional Range. Terrible product quality. After about three years of use, the range shows an error message cooling fan is too low. I wasnt able to use the oven. Abt Services came in to do the repair. One month after the cooling fan was installed, the same message came up again. When Abt Services replaced the cooling fan again, the display was completely out. The cost of the repair parts is over $800. Are you kidding me! I paid $1500 for the range. Now I need to pay $800 to repair. Whirlpool didnt offer any discount for repairing the defective product but offered purchase similar product at a discount price. I will never ever pay a dime for Whirlpool product. It is a nightmare using the product. I learned my lesson. No Whirlpool product again in our house.

Since these are made in Mexico as told me by the Lowes rep, quality has suffered. 1st one so crooked and put Roger on, no doubt a crooked floor, could not be fixed or leveled or plumbed. Got a replacement and, yes, same problem! Took off upper hinges and reamed all 4 hole out to line up tops of doors. Only problem is box of fridge is sooo racked that rear shims are needed, and many to experiment. My floor is perfect so its not that. Fixed for now but I am a pretty.much a perfectionist. Dont buy, make. Then Chuck them all in a landfill where they belong! And I dare anyone to try and get thru to them! THEY DONT CARE AT ALL!

We have never had problems with our old Kenmore appliances. Since we have had the Whirlpool complete set we have had problems with both the Refrigerator and now the Stove. The fridge had already been re-engineered by the time the repair man got here but the fix didnt work. We had a 50 degree refrigerator for over a month. Now the stove wont keep a constant temperature so we wait for the service man once again. They look beautiful but they are the worst we have owned over our 36 years. They obviously have engineering issues looking at all the other reviews. I dont see us purchasing another Whirlpool appliance in the future.

I had purchased a washing machine trough CSD canteen and go for AMC for five years on September 25, 2006. In September 2010, I lodged a complaint and the Engineer visited and asked for a replacement of the bottom cover. I said okay, but later on he told me that I have to replace the complete outer cover. I agreed and asked them to replace it. The cost is fixed for 2,500Rs. They replaced the cover but did not replace the bottom cover.I talked to the agency and they agreed to hold to 1,000Rs for the bottom cover and I paid to them 1,500Rs. Later they brought an old cover and I refused to replace that. They told that the bottom cover is not available. Then they never tried to replace the bottom cover. I arranged for the same from the local marketing for 600Rs and replaced it. I paid the service charge for the engineer.Later, I lodged a complaint that the machine was not drying the cloth. The engineer visited and told me that the belt will be replaced on payment. I agreed and he told me that I will visit the next day and replaced the belt. But he did not come until it was late.On September 18, 2011, with number DL0911018283, my machine was not switching on and I lodged a complaint to customer care. But no engineer visited me. Then I regularly complained but there was no response from the agency. On September 23, I talked to customer care, Mr. **, that I am going out of station and I lodged a complaint from the last five days that no engineer visited me. My AMC is expiring on September 25, 2011. I will come back on October and then send the engineer. On October 9, I reminded them that they refresh my complaint with number DL1011007031. The engineer visited and told me that the PCB of the machine is faulty and I have to pay 3,500Rs.I told him that I complained for this problem during the AMC period, hence they are supposed to repair my machine free of cost but he refused. I talked to customer care and tried to resolve the issue but I was not successful. Then I talked to Mr. **, the head of Customer care in Delhi, on October 12. He promised to resolve the issue but no engineer visited me and my machine is still defective. On October 13, I tried to contact Mr. ** several times but he or his PA is not picking up the phone. Now, how will I get to repair my machine?

I bought a Whirlpool High Efficiency top load washer. It does not get the clothes clean. Dark clothes come out with spots all over them. There is not enough water to rinse out the dirt. It is left on the clothes in spots. I have to take my clothes to the laundry mat to wash them to get them clean. I am 74 years old and have used Whirlpool appliances all my life. I have dt3 rental houses I keep Whirlpool appliances in. But I wont be buying any more. I had to call the repair man one month after I bought it. He had to recalibrate the machine. If all you want to wash or maybe rinse out is a pair of slacks or a shirt, it might be o.k. but not a load of dirty clothes. It is just a JOKE.

I replaced our old Whirlpool washer that we had for 10 years with a new Whirlpool high-efficiency front load washer in August 2020 - it quit working on December 11, 2020. Got a repair person through Whirlpool on December 22nd who said I need a new motherboard. I am still waiting!!! 42 days with no washer and Whirlpool has no answers regarding the parts arrival and I can’t even sell the thing and get another brand because it doesn’t work! I’m beyond angry!!

Worst appliance of any kind that I have ever used. Has only on/off button, in effect. Wastes water. There is no option to change anything once cycle has begun. No soaking. Occasionally, the machine simply decides to stop and drain itself so that you can start all over again!! No idea how long cycle is. Nearly done? No idea. No matter what temp or how much detergent or how much water, the clothes are not clean. The lid locks and so there is no way to know whats going on. I suspect there is very little water during rinse cycle. All of the whirlpool appliances are similarly horrible. Washer is the WORST. Shame on you Made in America.

Have to keep coins collecting in pump and ruins pump or starts leaking. I feel there is another way it could be solved. I spent enough for this washer. Now I fix that. Now it leaks on discharge hose. Hard to stop it. Like old washer worked lot better all round. Never had that trouble. 4yrs old 1,200.00 plus cost sending somebody out to fix it. Crazy! This happen more than one time with this machine. Thank you.

Love the design and style. It is an above the stove built-in model. And love the combination of microwave use and to have the ability to also use convection. It certainly has been an excellent purchase and would buy it again and would strongly recommend it to anyone.

Washing clothes is a nightmare. I am constantly removing clothing from the washing machine that have been torn and left with holes. I am utterly frustrated. Because the machine is more than three years old, there has been no solution to my problem. I have now replaced clothing items in excess of $2,000. I am always here that they will send a repairman and yet there is still the problem. This machine is costing me too much money. The newer machines have fixed the problem. There is no gap between the drum and the doorway or rubber piece. I want that piece to stop this nightmare. This machine has taken a dream of mine and demolished the experience. I hate washing clothes but more so having a machine at home and then going to the laundromat to stop the chaos with doing laundry at home.

I dont know how anybody could write a good review on this machine. It always requires deep water wash and sometimes two cycles to get clothes clean. On regular cycle, it doesnt get water on all clothes. Oh yes, it does save water... Ive pulled things out with dry areas on them.

Refrigerator is good, keeps food at a good temperature, freezer keeps even ice cream solid. Only fault is draw in freezer does not hold as much as the old bottom freezer with separate unit for a draw. The refrigerator is nice looking and does the job. It just seems that manufacturers are always trying to make things better, but usually features were fine in older models.

I just bought a house with a Whirlpool Accubake wall oven and after I did a self-clean, the oven quit working. It goes through the motions of working but neither element heats up. After replacing the elements ($95), I am going to replace the thermal fuse to see if that cures the problem. Whirlpools automated Customer Service phone service sucks. You cant talk to anyone about troubleshooting any problems so you spend money until you eliminate all possibilities.

I am a Whirlpool Privilege Member - IFB privilege number **. This is Mrs ** here and I possess two Whirlpool Fridges, one single door and one double door (Elite Model). In fact, all my family members have Whirlpool refrigerators because I recommended them and because I have had a very satisfying experience with your service until now.I recently (first week of March) logged a complaint as my fridge was not working (it was working on and off). The Mechanic from the service center visited us and said that the compressor was at fault. I had some doubt about this as the Fridge was working on and off and I requested my friend who had a workshop to come and have a look. He checked and said that the compressor was working perfectly but looked like there was some problem in the supply of current which could be a loose contact or something.So I logged another complaint and when the mechanic came (this time a different one), I was out of the country and my husband was there in the house. He checked the fridge and said the compressor was working and apologized for the earlier mechanic’s wrong diagnosis. He also said that it was difficult that since the wires were inside the beading or the Puff, or whatever, the fridge could not be repaired.I am really astonished and pained by this comment by the mechanic as we spent a lot of money and bought a fridge for its brand worth name. I shudder to think if this complaint had happened two years after I brought it, should I simply throw the fridge because it cant be repaired? Is there anything at all where the company can say it can’t be repaired? Are fridges used and thrown in India? I am all the more worried because I have been recommending Whirlpool Fridges left and right to everyone and I tell them that there could be a situation when Whirlpool would ask you to simply throw your fridge away. I still have belief in Whirlpool and I firmly believe my recommendations would not go wrong, and it is only the fault of the mechanic who could have made this remark unwittingly.

I purchased a Whirlpool Ref side by side 11-2013. I have had nothing but trouble. First the Ice maker leaked, was fixed. The door to the ref has had serviced 5 times. The tech after many times trying to fix hinge on door twice was told to order new door. This took 6-8 week to get. Came today 5-27-15 too but new door on. It is still not right, has big gap in the middle - still not level as should be. I have called Customer Service again today with no help. All they want you to do is spend more money on a contract. I THOUGHT WHIRLPOOL WAS SUPPOSED TO BE A GOOD PRODUCT......NOTTA....WILL NEVER BUY THIS PRODUCT AGAIN. SO IF YOU EVER BUY WHIRLPOOL PRODUCT BE SURE TO GET EXTENDED WARRANTY. YOU MIGHT NEED IT..........STILL NOT SATISFIED AND NO HELP IN SIGHT.

Model GB2FHDXWS04 - This refrigerator dumps water all over the floor at least 1 time a week. We just leave a towel on the floor to absorb it because you never know when it is going to happen. Have removed the stuff and cleaned all of the ice out of the bottom of the fridge but in no time it is back. What a crummy unit. I am going to drill a hole in the bottom of it and put in a drain I guess.

We just purchased a new fridge - September 2021 -- Whirlpool side by side. Why is just okay? It is a loud refrigerator. A roaring sound is pretty constant. The ice tray in the door has no recessed tray ... so water and melting ice just follow down the front of the door and onto the floor. Two days after purchase we went back to Lowes to return this fridge ... but all the other refrigerators do not have a recessed ice tray. And since they are not plugged in ... who knows if they roar.

I purchased a Whirlpool washer 7 months ago, and a month ago, it broke. I have been without my washer for 1 month, and it has been repaired 4 times in that month. It is still not working. All I get is that, its under warranty, and there isnt anything they can do, but to keep trying to fix it. I have been having to take my clothes to a laundromat, and pay to have them washed. I have asked for them to deem it defective, but they refuse.

Whirlpool Gold GC3SHAXVBOO - Two issues in two years. We purchased this refrigerator online through Whirlpool in April 2010. Almost a year later, a circuit board went. This was repaired under warranty. Our refrigerator was making loud cycling noises and we were told this was normal. Now a year later, again we have an issue. This time its the compressor. We called customer service and were told there is nothing they can do. The cost to fix approximately is $700. This is very upsetting to buy a $2000 refrigerator and have two major issues within two years and then not have the company stand by their product. I would wonder how many other people have this model and have these issues as it seems like a lot. Whirlpool customer service is terrible, non-caring and offered no assistance.

Purchased this Whirlpool Duet washer WFW920ww00 in 2011. 6 service calls while under 1 year warranty. The mother board was replaced..... after I smelled smoke and burning. Had trouble draining.... error codes F9E2 and F9E1 and SD (suds) and low flow were the usual. At times took 4-6 runs to get it through to point where I could open door. Often need to unplug for 20 minutes in order for it to progress. Clothes would not ring out... or be floating in water. Lately had to run on medium spin just to get it to work at all. The odor/smell was horrible and the rubber ring was black with mold after the 1st year. Completely stopped working this week, no power to panel. The repair shop said to not bother.... he has had customers replace 2 or 3 major parts in these and still keep getting the annoying error codes and difficulty making it through a complete wash. Moving on and buying something else.

I purchased the four-door Whirlpool stainless steel refrigerator. It was installed on the 15th of June. One month later, the ice was not coming through the dispenser and if it did, it was a small amount. During this time, I was receiving notices from them about purchasing an extended warranty. Today, August 23, 2012, the ice maker stopped working completely. I was disgusted. Paying for the top-of-the-line refrigerator that doesnt last for 90 days is ridiculous. Also, the handle on the vegetable keeps coming off. That will be the last Whirlpool appliance I will buy.

Where to begin? I bought Whirlpool Duet Front-Load Washing Machine about 11 months ago after my top load bearing went bad and start making a lot of noise after 8-9 years. 4 months ago (6 months from purchase) it started to act strange; washing machine will not unlock after a cycle, start throwing F3E1 error. Thats when I first called their support service. Their service technicians are very nice actually. They seem to be local small appliance shop, contacted out by Whirlpool, from my guess. Initial visit was to inform me that Im using WAY too much soap, while I was only using well below what was recommended by Whirlpool manual. RED FLAG #1. Technicians told me to stop using too much soap or start using POD. Also to flush my washing machine with 2 cups of white vinegar in hot cycle every few weeks. Ive changed my soap to Tide POD and starting flushing my washing machine immediately after he left my house. It was running OK, but I still saw F3E1 error at the end of every other cycle, until... thing went really bad one day, it simply stopped responding any command while clothes was still in the washing machine. I unplugged power cable and plug it back, it hums for 10 mins and in the end it was the same result. After several attempt, it finally unlocked itself, thus I could wash my clothes at my parents house. This is when I called support service 2nd time. The same technician came and this time, I had video recording of everything. He could not dismiss this with simple soap theory, so he opens up the washing machine and tells me that its due to bad control board. He proceeds to order new control board, which took a few weeks. New technician comes back with new control board and installs, runs a few test command (not full cycle) and leaves. During this whole time, Im left with no washing machine at home. Good thing I travel sometimes and laundry is done remotely sometimes. This repair didnt improve the situation much. I called them back for another appointment. Another technician comes back and tells me that Whirlpool sent back BAD control board. Now, Im really suspecting their product is really piece of **. At least at this point, I was still happy with their service. He leaves my house claiming that they will order new control board and re-install.A few days later, I receive a call from a lady, claiming that Whirlpool has instructed them to ask me to use different outlet, since they believe my outlet is causing issues. Now Im really pissed. Coming from electrical engineering background, I know theres always any chance, but they should double check this with their own technicians. Anyways, I perform their recommendation, which I knew was a shot in the dark. During this whole ordeal, Im working on a project that are out of state (CA). Not only do I have time to stay home for all these service visits, but Im not even home to test my washing machine. During one of the holiday, I was able to take a few days off. This is when I decided to take different approach. I went to the retailer, whom I purchased my washing machine from. They were also nice, but theres so much they can do.I called Whirlpool direct line to explain my situation, how unhappy I was, and to replace my washing machine. Their response was by the book: We can only execute our warranty policy and replacement is not part of warranty. The representative specialist had enough nerve to ask me why I have not called back in several weeks and continue to repeat it as if its my problem for not reporting back. I had spent 2 months of supports and 4 site visits, where I had to reschedule my work or take a day off, before travelling for projects after holiday seasons. This representative really took customer service to next level of hell. In the end Im without properly functioning washing machine for 4 months. I have to coordinate with my parents to use their washing machine when Im back home. My advice, you should really think 3 times before buying Whirlpool washing machine or any other appliance. Also consider that youre on your own, when their product malfunctions, and youll be sitting on dead appliances.

Certain brands of dishwashers made by Whirlpool, including Whirlpool, Kitchenaid and Kenmore, are a fire hazard. Most appeared to be made in the mid-00s. My Kenmore Elite, model# 665.16293400, bought in March 2006, started emitting a burning plastic smell. I removed the door panel and found where the control board wires have been overheating and melting the plastic liner inside the door.Further investigation led me to kitchenaidfire.com, which details the models involved and includes hundreds of reports of fires from these models. I also searched saferproducts.gov and also found over 100 reports of fires from these models. The report logs are growing rapidly as it appears most of the control boards start to malfunction about five years in.I called Sears and they said that Whirlpool needs to do a recall. I called Whirlpool and I was told that they do not make Kenmore dishwashers, only some parts. This is completely false. I couldnt believe the representative was told to tell me that besides the part that is failing is stamped Whirlpool. These Whirpool-made dishwashers are a documented fire hazard and need to be recalled. I do not know what it takes, hundreds of fire reports have been logged and they are rapidly growing, but I hope that it doesnt take someone to be killed before they are recalled.

I am done with Whirlpool. Everything I have bought is failing. I bought all new appliances when moving into my home. Dishwasher, 2.5 years old, quit. Cost is going to be as much as a new one. Refrigerator quit at 5 years old, what a mess that was. Paint is peeling off my clothes washer. I am not going to buy or recommend any more of this junk.

Bought washer just under three years ago and the tub bearing started to sound like a jet airplane. Whirlpool seems to have an ongoing issue with the tub seal which goes bad and then allows water to enter the bearing which then fails. Whirlpool will not make it right, I guess I will have to plan on a $350 repair every two to three years if I keep this machine. I am very disappointed with whirlpool for not standing behind what is a known problem. They should replace these seals under warranty so that the Bearing does not fail. Thats my opinion, recall the seals and fix a bad design problem. I would not recommend ANY whirlpool products to anyone at this point. What other problems do they have with their other products?

We purchased our 4 French door refrigerator on 1/22/15. It started making a loud noise, like an air compressor. It continue to get louder and louder over a period of a couple of days. Called the dealer where it was purchased and a repairman was not available for another week. When the repairman showed up and diagnosed the problem which was a leak in the freezer causing ice and the fan to hit the ice, they were not equipped to fix that type of problem. We were advised to call Whirlpool consumer dept. which we did, and was advised they would send out another repairman and would be another week. Have had to move food and freezer items out of refrigerator. Two and one half weeks and no solution. Five month old refrigerator that is not usable. Very disappointed in product and service.

This morning another chunk of our Whirlpool Microwave handle fell off while I was cooking breakfast. I got on the internet after breakfast and typed in whirlpool microwaves to see if anyone else had experienced problems with their microwave handles and found this site. We purchased a Whirlpool Microwave oven from Lowes in 2011 (over the range model). About two weeks after it was installed, I noticed a crack in the handle. Then a few days after that, a small chunk of glass/plastic fell off of the handle when I shut the microwave door. Since that time, the door handle has been steadily disintegrating. Sometimes chunks of plastic fall off when one shuts the door, even if you are very gentle. Chunks of plastic fall off nearly every time I clean the microwave door, even if I dont touch the handle. Sometimes chunks fall off randomly when Im not even using the microwave. Pieces of plastic have fallen into my cooking pots a few times. Perhaps the steam from the cooking food loosens the cheap glue holding the handle on? What an inferior product! I am very dissatisfied with Whirlpool and will not recommend their products to anyone.

I purchased a Whirlpool top load 8500 washing machine from LOWEs two years ago. I noticed that the clothes were not getting wet, clean, were coming out covered in lint, soap film and stained. It is misleading to call it a HE washer since I have to wash each load 3 - 4.5 hours. It is NOT energy efficient if you have to wash each load of clothes 3 times with a rinse. I have tried all of the tricks - changing soaps, labeling the wash as bulky, wetting the clothes to add weight... Washing clothes should not be this complicated. The clothes are sorted appropriately and washed in the right temperature. I do not understand what is staining the clothes. I put new white towels in and they come out stained (see photo)? Lowes sent out a repairman who said the machine would never clean the clothes since there was not enough water in the washing machine to wash the clothes. I tried to return the washer to Lowes but they said it was past the 30 days. Unfortunately, I purchased the appliances on a Lowes credit card so there was no recourse. I then contacted Whirlpool and was put on hold and transferred to various people before I gave up.

The first Front load Whirlpool washer leaked. 5 repair techs visits. Wasted days. Finally located the leak, in the main basket. Replaced washer. Second washer the clothes come out smelling like a horse blanket. Mold. Clean the washer every month still mold. Plan on junking the washer a getting a new model. Never expected this much trouble and time on a basic appliance.

Yesterday, my DC premier refrigerator purchased on 22.12.2011 suddenly stopped working for a long time, and the inside light automatically went off. All food, vegetables, and others are damaged and rotten. Now we are scared to keep anything inside this for huge loss and health problem. Kindly rectify this, and do the needful at the earliest.

I dont recommend this product to anyone. When you try to clean the washer it leaks out the bottom. After 2 years of use it now beeps 9 - 10 times and I have to reset it after each beep to get it to run. Then in the middle of the rinse cycle it does the same thing all over again. What a piece of junk. Plus it does not rinse well at all. Leaves a white residue on my blankets. NOT recommended at all.

This is the information I tried to send to Whirlpool only to get a message that it was undeliverable: I purchased a set of whirlpool cabrio washer and dryer on 10-23-2013 (model numbers WTW8540BW, and WED8500BW). On 01-25-15 the washing machine failed to power up just over 2 months out of the standard warranty. This wasnt the low end cheap models. With cash discounts we paid over $1600.00 for the set. After a $70.00 dollar charge to the repairman we are told that the unit has a bad electric control board (part # W10761026). And unfortunately the part is on back order until March 1st, 2015 as of right now. So if and when the repairman gets the part and installs it, I get to pay him an additional $260.00. My family has always been such a dedicated Whirlpool appliance purchaser but this is wrong.Oh I almost forget, now I have to rent a washing machine at a cost of $55.00 per month until mine is repaired. I believed I was purchasing Whirlpool quality. The type of quality that doesnt need an extended warranty because Whirlpool is made to last correct? Please assist me in making this situation right and restore my faith in the quality I was raised with in Whirlpool products.

I called the dealers repair department, which said they had not seen this before and it looks defective. I have used the oven less than a dozen times. It is virtually new. They submitted pictures to Whirlpool. The oven surround is not replaceable, so the request is to get a new oven. Whirlpool responded with, This is normal... when the cracks break through, then there is a problem. What?! I have been cooking for over 50 years and have never had this experience before. This product is under warranty. By the time it cracks through, it will be too late to do anything about it. Since when is crazing on the oven bottom natural, especially after only a very few times used? This is defective and Whirlpool is shirking their warranty. I am very dissatisfied.

My very expensive Whirlpool refrigerator thats three and a half years old broke down before Thanksgiving 2020. I am not able to get parts until after May 18th 2021. After calling numerous times and spending lots of time on hold I was told February 11th by Whirlpool that they had the parts in stock and they gave me a price for each part. Then they connected me to the parts department where they told me they dont have two of the 4 parts that I need. The price that they gave me for the same parts with a lot higher than what they told me at whirlpool. Whirlpool customer service was terrible its as if they dont give a damn. They just dont care.I cant believe its going to be 7 to 8 months to get parts for a three and a half year old refrigerator. I have fallen down my basement steps where I have a small very very old refrigerator twice carrying food up and down. Spreading mustard and sour cream all over my carpet my stairs my walls. Not to mention the fact that I have bruises all over my body. If I were you I would not buy a whirlpool. Its going to cost over $600 for the parts replacements that is if I can ever get them. Im going to have to break down and buy another refrigerator. Remember Whirlpool customer service is terrible and you can just forget about getting the parts.

We recently purchased a new Whirlpool refrigerator and washer/dryer set from Home Depot. The truck for delivery was late and unable to pick up the refrigerator in time for scheduled delivery. Whirlpool contacted us to inform that it was now on back order for another week claiming there was nothing else they could do. Strike one. We paid for the installation and kit for the washer and dryer set. The tech who delivered them claimed the kit was not correct and that he could not install the dryer. We contacted Home Depot, Whirlpool, and had Home Depot call Whirlpool on our behalf with no resolution. They will not refund the installation even though they didn’t install anything.Whirlpool will not directly say whether or not they will send someone else out to actually install it this time. To top it off - I asked the Whirlpool rep which kit needs to be used and she told me whichever I want... for a gas hook up... whichever I want. This is ridiculous and Whirlpool has the worst customer service I have ever experienced. Side note - don’t waste time on the chat feature they provide. You will be directed back to the 800 number with 30 minute hold times. Horrible company!

One month ago the freezer quit working. Lowes sent out a repairman who told us it would cost over $1000 to fix. This fridge is only 18 months old. I called Lowes and the Whirlpool and they offered to supply the parts. Repairman came out yesterday and said the refrigerator cant be fixed. Am now waiting for Whirlpool to call us back and tell us what recourse we have. Very disappointed. Fridge is now sitting unplugged in my kitchen. Will never buy another Whirlpool product again. If there are so many issues, there should have been a recall on these items!

Our experience with the Whirlpool Duet Steam washer is the same. Weve had ours about 2 years and have replaced a sensor and the rubber boot (both in the first year) and now we too have had the bearings go out. Weve called Nebraska Furniture Mart and Whirlpool. No one really cares. Its unbelievable that $1800 is down the drain and its acceptable! What are the steps for a class action lawsuit? How about getting some social media involved to get Whirlpools attention? It worked with Netflix and Bank of America. They had to finally listen to the public. So frustrated!

Whirlpool® Gold® 5.8CuFt Capacity | GAS Stainless - This was not an inexpensive stove. The self cleaning oven function is a total failure. You are not supposed to use oven cleaner on the glass, it now has obscured the view into the oven. The top of the stove is very difficult or impossible to clean. The knobs are a dangerous issue. They will fall off at the slightest touch and the stainless markers around the knob are just a stick on label. The oven temperature is not accurate. The bottom drawer is completely rust spots on the inside. What more can I say. Oh I know. Whirlpool your quality is a disgrace and I want a refund.

I purchased the Whirlpool Duet Steam Washer and Dryer in the spring of 2010. Washer bearings just broke. I was told that the bearings in these machines are not strong enough to support the spin cycles. It is very disappointing to think that a company like Whirlpool would have their customers pay $1000 for a machine they know is not going to last. I agree with Julie. Maybe a class action lawsuit needs to be filed. Is there a lemon law for washing machines?

We bought a Whirpool Cabrio, model WTW62000W9, and it is junk! We bought higher-end thinking that it would last. It is less than two years old and averages three loads per week. The transmission is out. It needs to be loaded on the boat back to China.

This is the worst washer/dryer I have ever had. It is so damn loud that the neighbors can hear it. Water level is too low. Today the dial is making a buzzing sound. I have to re-rinse the clothes. It does not spin enough, have to re-spin again. What kind of energy saver is this, NONE. They said thats the way the machine is, loud, thats bull. No machine should be like that. I threw money away when I bought that piece of (you know what). Dont buy this machine. Consumer Affairs, you should pursue this product with Whirlpool and have them do something about it. They do absolutely NOTHING.

I have a one year old Whirlpool refrigerator which was fine for 6 months. Since then it has been a nightmare. If Lowe’s had not intervened on my behalf, I never would have gotten service. Have had at least 6 service calls, 2 new ice makers and various other parts. It should be bright yellow.

I purchased a french door refrigerator in March 2013. I purchased the Gold Series because I wanted the best. I have come to the conclusion that Whirlpool does not make a refrigerator with the quality to reflect the Gold Label or any label. My ice maker system created ice dams inside the fresh food area, in the ice bin compartment and allowed water to run into the fresh food area and floor. After four repair visits, I am still dealing with occasional water running down the inside of the ice maker door and into the fresh food area. I contacted Whirlpool and tried to get the defective refrigerator replaced; however, the very rude customer service representative insisted on another repair call by A&E. They scheduled the appointment for a time different than we agreed upon, so at this point I have had to cancel this appointment. I do not know why anyone would want to buy an appliance made by Whirlpool, which includes several other brands.

I love my Whirlpool Washing machine. Purchased it 2 yrs ago & have not had any issues. Its quiet, large capacity. Washes my clothes very clean. The various washing cycles makes it so convenient to wash as much or as little as I need on any occasion. I do recommend to anyone that you do the cleaning cycle on these new washers to ensure top performance when washing.

We purchased 4.0 cu. ft. Cabrio Top Load Washer with 6th Sense Technology MODEL WTW7340XW2 on 11/20/2011. We are a small family of 3 so use of the machine is light. We noticed a strange sound and some leaks a week ago and called in a technician recommended on the Whirlpool website. To our horror he informed us that we need to replace the tub bearing assembly, rotor and stator - to a cost of $1095! This machine is not even 3 years old. Did we buy a lemon? I called Whirlpool. They were simply not interested. The online chat person sent me to the Whirlpool Customer Experience Team where I was told that I should buy an insurance plan to cover the costs of repairs. They then sent me on to the insurance department who want me to pay $338 to buy a repair plan to have the machine fixed. And then referred me to the Manufacturing division when I wanted to know how to escalate the problem - and if you call that number - there is no option to deal with problems - seriously?!? Is this what I should expect when buying the Whirlpool brand?

We got a DEAL for this nightmare for nearly $700 back in 2014. Nothing but problems. Constantly finding plastic pieces at the bottom... some identifiable; others not. They are from the cheap parts within. The control board lights (all but 1 works) went just after the 1 yr mark. We are now having to replace the top Rack Adjuster (MORE CHEAP PLASTIC), as it has been barely hanging on for the last year and a half... constantly fighting it, as it would drop all the dishes if you moved it wrong.Now, the water is not draining at all... period. We clean this religiously - always rinse dishes completely, use rinse aid, never stuff dishes. Today we find a random plastic piece, which we are now trying to identify. NOTE: we dont put plastics in the dishwasher. So, today a new plastic piece and major drain problems. We are in the market and purchasing a new French Door Refrigerator and Front Load Washer. Will NOT be going with anything Whirlpool. Not much better these days, but this name has a big RED NO for us. Made it even worse when we contacted for help after that 1 yr mark. NO HELP AT ALL.

I am old school & do not like the idea that I cannot open my machine without waiting until it slows to a stop before door will unlock. You do not know what level your water is unless opening door. You are not able to open door & see if you need more detergent. Water softener is the same -- do I need more/less, cant tell. But, the washer performs well & clothes are clean, even dirty jeans/work clothes.

This is our 3rd repair in 13 months and now my 4 and 1/2 year old son and I both suffered bacterial food poisoning on this 3rd round. It has been a complete nightmare. Then we found out until last month, they were completely replacing the entire refrigerator. Then they stopped that and are just replacing the parts again. Now there is a back order of the parts and not to put any food in there or we will get sick again. The repair itself will take 4 hours whenever they get the parts in and another 1/2 day to take off work. We are building a house and have bought the entire gold series line of crap that is sitting in boxes in our garage. NOW WHAT WHIRLPOOL?

I purchased it in 2011 for $1100 Canadian. Smooth glass top and true convection. The controls were easy to use, and understand. What bothered me was that it stopped working just after the warranty ran out. I did my research, and found that the newer ranges that have the controls on top at the back have issues with the motherboard overheating, and causing this problem. I did speak to Whirlpool customer service, and managed to convince them to supply the replacement part at no cost. I paid my local dealer to install it. This repair lasted for just over 1 year. Same problem again.This time I could not convince Whirlpool to supply the part. FYI The part in question is the controller. Essentially a motherboard. All the controls are operated through this small computer. It is the only replacement part that costs over $100. Last I checked it was around $450 Canadian. The reason for the fault is overheating. According to the tech that fixed it the first time, it is the most common problem with this style of range. I find this concerning considering the only thing a range does is create heat!Keep in mind that you are virtually held over a barrel. There are only two companies that market their products under multiple names adding up to over 80% of the appliances on the market. They battle for that market by offering more bells and whistles, and less quality. The Range I replaced four years ago was 20 years old. I just replaced my Whirlpool 3 months ago. I went outside of the 80%, and bought a Samsung. Im rolling the dice, and went with induction top. My theory is it will produce less heat because it just heats the pot, not the stove top.Low quality drives me nuts. I want fewer bells and whistles, and more long lasting reliability. I should be able to go my lifetime and only buy two or three ranges. We really like the induction top. It works fast, and doesnt produce too much excess heat. Dual zone oven is a good idea. We werent looking for it, but there was a deal on. The dual zone induction range was only $50 more than the regular one beside it. Now my wife uses it all the time. She will have cookies in one zone, and a casserole for supper in the other. True convection is the other must have. It does a great job cooking everything evenly.

I had started the dishwasher and had gone to bed last night. I came downstairs ten minutes later to get a bottle of water. There was smoke throughout my downstairs levels. Our Whirlpool Gold Dishwashers control had dark, noxious smoke emitting from it. I tried to turn it off but it was too hot to touch. I went to the breaker box and shut it off there, turned on fans, and went back to bed. This morning, it turned the electricity back on. It started smoking again. I tried to cancel the cycle but it wouldnt cancel. I opened the door to stop the cycle and it continued spraying water and still wouldnt shut down. I had to shut it off at the breaker again. Next problem is my refrigerator, washer and dryer are all on the same breaker. UGH! This is the second Whirlpool I have had. The first one had a rusted tub that leaked into our basement. The repair guy said he had never seen that before...sure...why would you put something in a dishwasher that would rust out on you? Whirlpool, NEVER AGAIN. I WILL PASS THIS INFO ON TO EACH AND EVERY PERSON I EVER KNOW. COUNT ON IT.