After 50+ years of doing laundry, I had to purchase my 3rd washer. I bought the new top loader without an agitator. I very quickly learned that it has no lint filter. My first load was towels and mats. The lint clogged up my tub and drain pouring water all over the floor. Since then it has ruined many of my clothes which are mostly sweaters and sweater-knits. Without a lint filter, it deposits the lint right back on the clothes where it stays forever unless I shave or pick it off, even though Ive turned them inside-out. (Time consuming waste!) Even my socks have little balls of lint. It seems the only safe fabrics are new, smooth woven cottons, cotton-blends and slippery nylon providing there is no lace or brushed elastic.Now to the no fabric-softener dispenser... The Downy ball simply doesnt work, and theres no other way to add it. Waiting to use dryer sheets is too late; the damage is done. My clothes are dingy. In my 50+ years of ownership, I have never had to purchase a separate product to wash my washer so that it doesnt stink... and it does. Why does it lock after starting? If I could afford to replace it, I would... but I cant.

I had problems with the door closure on day 3 of my French Door Refrigerator Model # WRF560SEY. The flap on the left door that seals them fails to fold back if I open the right door first. Which didnt seem like a big deal until I tried to close them and have to remember to close the left door first or itll bang against the right door and Im afraid itll break that piece off then the refrigerator is worthless. The manufacturer drop shipped a new piece, after several attempts of adjusting the closure, and it still does not work. I have written Whirlpool and am told they have a new door on order but it will take 6-8 weeks, that was in March. Now when I contact Whirlpool no one ever returns my calls or emails. I have had the refrigerator only for 15 months and I have fought with either the store or Whirlpool since the third day of owning it. No one cares as long as the appliance is paid for. I will never buy another Whirlpool appliance.

WRF989SDAM00 - We spent about $1800 on a Whirlpool French Door refrigerator and at 1.5 years we had to replace the compressor for $700+. Apparently Whirlpool will only warranty for 1 year. The repairman told me the compressor he was putting in is exactly the same model as the bad one he took out so I guess I am not surprised that it only has a 1.5 year working range. We are now 1.5 years into the new compressor and sure enough it is dying again. Now it sounds like a jet plane taking off. By the time I replace it again I could have bought a new refrigerator. I am trying to figure out if this refrigerator is on recall because I cant keep replacing the compressor every 1.5 year. Never again will I purchase a Whirlpool product. I think they know the lifespan of that compressor and that is why the warranty falls just short of it!!

Bought new. About 3 years old. Been repaired 2 times. Will run about 10 minutes, drain, and stop. Does not clean dishes. Model #du1015 xt xs2 Whirlpool Quiet Partner 1. Never will buy Whirlpool again.

I purchased a Whirlpool gas hot water heater in July 2012 and have had to replace the control/pilot light mechanism every 6 months since then. Whirlpools customer service is the worst service in the world. They are rude. I have followed their instructions every time and have been accused of being uncooperative. I paid $350 to $400 for my heater and just spent $200.00 to have a plumber put apple cider vinegar in my tank.I was told by Whirlpool that the calcium sediment was causing the problem... I drained this tank twice and there was no sediment in the tank. This is evidently a common error for Whirlpool tanks. I will never purchase any Whirlpool product again and will tell others that their products are crap. The worst part was the inconsiderate customer service. I dont know who trains them, but they need to fire the entire bunch. Shame on you Whirlpool!

I bought a Whirlpool refrigerator because it was the lowest priced model that offered a bottom freezer compartment and fit into our available space in the kitchen. We also want a white coloured appliance. One thing we never noticed until set up at home was that there were no ice making trays nor an ice bin. We have had the fridge for five years with no problems. It is quite noisy when running.

It is in the mid-range of cost and functions. For a mid-range dishwasher, it has many options, sometimes too many. It does not have rinse and hold. I think its cycles run too long; not always energy efficient (i.e. the simplest one uses the most energy).

I am a single parent. So I was very excited when I had saved enough to purchase a new washer and dryer. I purchased Whirlpool because I had been told that was a good brand. From the beginning, I was having issues with the washer (Whirlpool Front Loader model #WFW8300SW04). It wouldnt start or it would not spin, or it would just lock and not be able to get it open. I had purchased a warranty. So I called to have it serviced. The tech came and told me that I needed to have my floor leveled under the washer. I hired someone to concrete under my washer and dryer. Again the washer still did the same thing. I used the warranty again. The second tech told me that I needed to have my electrical outlet changed. I again hired someone to change the outlet. Yet still the machine didnt work. I then hired a tech to come out and was told the mother board needed to be replaced. Had that done. The machine worked for a short time with no issues. But yet again it wont start, or wont spin, or it locks and you cant get it opened. I contacted Whirlpool and their answer to the problem was they would be glad to set up an appointment to send out one of their techs (at my expense). I have hired another tech and being told that the mother board once again needs to be replaced. I am so disappointed with Whirlpool and their service. I dont understand why they won’t stand behind their products. I will (when able) purchase another washer, but it most definitely will NOT be Whirlpool. Anyone else having issues with the same model? Would like to hear.

I purchased Whirlpool Duet HT front-load washing machine with model #GHW9400PLO. After a year of owning the product, failure codes continued to appear. I have followed the direction under the troubleshooting page which said to cancel and unplug the unit. After doing this over and over, I finally took the top lid off to inspect the problem. A ribbon cable was torn due to the top lid rubbing against the lid and the drum. I called Whirlpool and this was not covered (go figure). I then asked for the ribbon cable and they said they cannot just supply the ribbon cable and that I would have to buy the user interface which is $191 plus a $35 core fee because they re-bill them. What a rip off. A ribbon cable from a computer store would only cost $10.00. After that repair the Micro Machine control went out which is code F11. Code F11 is all over the web because this is a defective part that Whirlpool should do a recall on but why do that when they can charge $310 plus, get this another $35 core charge because they re-bill them? If you are not mechanically inclined with these parts plus labor you could have bought 2 washing machines. But who in the world would buy 2 pieces of junk right?Bottom line is: do your research and buy from a company that will stand behind their product because Whirlpool will not! They know by the number of parts they ship out that that part should be recalled.

We purchased a Whirlpool dishwasher in August of 2014 (Model #WDT710PAYM6) and it broke for the first time in the summertime of 2015, so it was still under warranty. The manufacturer set us up with a local company to fix it. First of all, the guy comes out to look at it and has no parts with him whatsoever to fix it once he figures out the problem. So we ended up waiting for over a month before our dishwasher was fixed. That is a long time to have to hand wash dishes, especially with the amount that we go through each day. I know that ranting about having to hand wash dishes is such a first world problem thing to complain about, but my gosh...if I buy a brand new dishwasher for a good amount of money, I shouldnt have to hand wash my stupid dishes!!It has now broken AGAIN and it is no longer under warranty. We called Whirlpool to see what they could do because it should not be breaking this often. They told us we could either spend $250 for a years worth of maintenance on it, or just pay out of pocket. So you want me to pay $250 or more to fix a dishwasher that we spent over $400 on that has broken twice in a year??? Ive been looking on their website for this model to leave a review and cannot find it, so that leads me to believe that it is discontinued. So thank you, Whirlpool for the piece-of-crap dishwasher. I can see you really take care of your customers when they call about their concerns too. I will NEVER buy any Whirlpool appliance again, and I will be sure to let all of my friends know they shouldnt either. If I could rate this with negative stars I would. So now we have to go out and purchase another dishwasher. Thank God Cyber Monday is here. So I cannot say it enough, do not, do not, do not buy a Whirlpool. If you do, youll find its actually a Whirl-poo, because its a POS.

Whirlpool Gas Range WFG540H0es - Purchased 2 months ago. After 2 weeks there was a spill. The black burner caps are powder coated. After cooling we washed it with dish detergent & a sponge. The powder coating came off. Called the company. They replaced burner caps. Last week there was a spill and it stained the burner bases which are powder coated in a silver color. We tried 409 cleaner, Windex, dish detergent with a sponge. Could NOT get the stain out started removing powder coating. Called the company they ONLY guarantee cosmetic appearance 30 days. They wanted $139.00 for a new set of burner bases. I am going to go back to Lowes & see if we can return this Whirlpool range.

I had my old agitating washer for 8 yrs that went out. I liked Whirlpool so decide to try their washer. Found the Cabrio washer (SWS5000WO) and thought without the agitator it would give me more room for clothes to wash better. Boy was I wrong, no matter what cycle or what size load it is off balance on the very first spin. I have to stay near by to stop the washer before the first spin adjust the load and start over again. Jeans and towels are impossible to clean. It throws the tub so bad it has pushed the side out. I have checked the balancing rods and they are fine. After reading other complaints realize the Cabrio washers are terrible. I will be looking for a refurbished washer with an agitator and doubt I will buy Whirlpool again. They should have a recall on these machines. They are terrible.

I have had my washer & dryer about 12 yrs. It has given me great service; however the spin mechanism on the washer stopped one month ago. It was replaced thru my home appliance warranty. I need the front loader style because Im disabled now, and cant take clothes out of washer. My previous set was Kenmore & it lasted 20 years. Looking to purchase in 2 months.

My washer and dryer have been a great experience. Doing laundry has never been my favorite chore but these energy efficient and state of the art machines live up to their advertising. One of the best things I like about the washer is the ability to set the run time for a future time. I do wish the dryer had something similar.

It was not a good experience after I purchased a Whirlpool washer in Feb 2014. I have been going to Laundromat 5 months since I found the door did not able to secure. I reported in January 2015 and technicians from 3 different contractors made more than 10 visits for checking and replacing parts. Not only nothing gets done, I also missed work for all these days. Then I escalated to the Supervisor, ** and Miss ** in Executive Office of North American Region. Both of them are very nice that they understand the situation and how frustrate it is. Finally, ** said Whirlpool would replace it. ** told me that I should get phone call from H.H. Gregg within 48 hours. However, it has been two weeks and seems no one care. In this three days memorial weekend, I still need to go to Laundromat while they are enjoying BBQ with their friends and families. I dont know how long it take to replace it.

I had owned another Whirlpool Washer before, which died. I purchased this one. It was noisy and unreliable. Whereas the previous one lasted for 10 years, this one stopped working in less than 6. I went out and replaced it with a GE instead.

I purchased a Whirlpool 50 gallon gas hot water heater 3 years ago. I have 3 daughters all in school age. When my old one finally quit due to tank failure and out of warranty, I went to Lowes and bought a 6 year warranty hot water heater costing around $600. Now I figured you get what you pay for RIGHT! WRONG! So about 2 years ago the pilot light started to just go out on occasion, a bit of an inconvenience but there was no default code warning me of any other issues. So typically we just relight it. I called Whirlpool to get help with this issue, but they wanted me to pay for a technician to diagnose the problem. Um isnt that what the warranty is for? I said dont bother. Im not paying $150 for someone to tell me what I already know. Ill just keep relighting it myself. So finally the pilot light goes out for the 100th time but this time I go to reignite it and BOOM! It sounded like a twelve gauge shot gun going off in my face! Then it flutters flames into the chimney of the hot water heater. Scared the crap out of me at first. But it finally stopped and run fine. Well Im laying in bed a few nights later and woke up to a loud thumping noise, I go down stairs and it stops. The following day Im in the kitchen and THUMP THUMP THUMP BURP BURP BURP. Run over to the hot water heater closet and theres the flames shooting out of the gas valve into the hot water heater then BOOM! Its out! The valve unit finally took a crap I guess. I call Whirlpool again to get my warranty - this time it definitely needs to be replaced. So the guy tells me the parts are covered in the warranty but a technician needs to look at it first and the technician Ill have to pay.. Excuse me but what the ** did you just say? I have to pay for a technician to look at your failing part? No I dont think so! Just send me the part - Ill replace it myself. Im a millwright electrician by trade. I specialize in power plants and refineries. Im sure this little gas valve wont be a problem. I spoke with these idiots on a Friday and he said I could have it ground shipped for free and it should be here in 5-6 days or pay extra for quicker delivery. What the hell did he just say? I could pay extra for quicker delivery on Whirlpools faulty part? ** whirlpool should be saying Well have the part overnight to you.Now since it was a 3 day weekend theres no sense in me paying $40 to have it delivered 3 day because it still wouldnt arrive until close to the five day. So I just looked to see where my damn part is because it shouldve been here by now according to the guy on the phone. NOPE! Its set to be delivered in 5 more ** days. DONT BUY A WHIRLPOOL PRODUCT. THEY DO NOT PRACTICE ETHICS.

The technician that was here to repair my propane water heater called Whirlpool to get help with the problem. The pilot would not stay lit, they would not help him. I told him it was installed in a mobile home and he had to cap the gas to the heater, it was still under warranty. Later I found out there was a recall on this heater and that probably was the reason they told him that. I ordered a water heater just for mobiles and am in the process of getting it installed. I kept the old heater for now and will still pursue this issue under the warranty.

Agreeing with many. How disturbing to buy a Cabrio Whirlpool washing machine about 5 years ago. I might as well go down to the river and wash my clothes. The bearings went out which means I have to be the spin cycle. I am hanging out my clothes on the line - very wet - until my husband buys the part and fixes it himself. I had my maytag for 25 years. An awesome, dependable machine that we laid to rest because of rust. We should have gotten another drum instead of buying this machine. Where are the engineers that are making dependable appliances to last a LONG time? We have not gotten smarter. Or we only care about the all mighty dollar. Make something to last a short time so that you have to buy again. We will do some extensive research the next time we buy a washing machine. Do not buy this machine!

Quiet running, does a great job cleaning and drying the dishes, experienced some cloudiness on the glassware but found that if I position them in the middle of the upper rack that issue was solved.

Within a few months after I purchased my gas hotwater heater, I started having problems with it not wanting to stay lit. It was purchased in 2004. I see that this is an ongoing thing with Whirlpool. Every time I would call them, they would give me stupid answers on what it could be. One lady got hateful with me. I have replaced every part several times and Im having problems. About every two to three months, Im replacing thermal couple. As of right now, Ive been without hot water for eight days. I called and he told me about a trip button that is in the little white thing that has wires going to the thermal couple. I push in on it and then tried to start my heater and it worked. They have never offered to replace it or even give me a discount on a new one. No one should be having so much trouble out of your hotwater tank. This is not normal. These are defective and should be recalled. This company is ripping the consumers off and we need to stick together on this and do something about it. Im afraid to buy another heater because I can see that the new ones are still junk. What do you do?

In 2015 door of top loading washer (Whirlpool Cabrio Washer) needed total replacement. Lucky I had an extended warranty. 2018 March, extended warranty expired and now have the exact same problem. Pretty crummy product if major part like a door has to be replaced every 3-4 years. We do not wash large items like blankets/quilts in this machine. That goes to a laundromat where there are oversized machines or to a dry cleaner. So the only reason for this breakage is a default in the lid assembly. There is only one phone number for customer service, repair, parts etc. Put in my service call and filed a complaint at same time hoping for at least a small discount. Ha! $100 plus tax for service call- part price ranges from $150-230 plus tax. Whirlpool could tell me the part exists but would not say how long it takes to get it! Do NOT buy Whirlpool washer with top load lid that has glass window. Big problem is that Whirlpool now has Jenn-Air, KitchenAid, Maytag and Amana all under their umbrella.

Mine came new with the home I purchased 3 years ago and so far I have had no problems at all. The only drawback is that if it is on, you can hardly tell it is running so if you forget you might interrupt the wash cycle unintentionally. It does an excellent job on dishes and the stainless steel front is easy to keep clean since there are no mechanical knobs or switches, you can just wipe it down and be done in less than a minute.

Whirlpool Dryer Model WED4815EWO and Whirlpool Washer W10682799 - I have always had great results with Whirlpool products. Both are energy efficient and save on operating costs. I purchased them three (3) months ago. The washer locks during the wash cycle. That took a little getting used to. I have always been able to rely on Whirlpool products. The top loading washer (W10682799) is energy efficient and high capacity. It regulates the water level so you dont have to worry about wasting water. The matching Dryer (WED4815EWO) has a sensor to regulate your drying time or it can be manually set. I appreciate the worry free, self-regulating functions on both the washer and the dryer.

I purchased a range top from Lowes and a month and half my burners go out. I call Whirlpool and a service technician came out. Said that he cant repair the stove because a bug had burned out the burners and he cant repair the stove. I call Whirlpool and they told me that voids my warranty with them even though my stove is not even two months old that will not repair it and I will have to pay for it to be repaired. I asked Lowes and they told me that they only take back big appliances back before 30 days. Now I am stuck with a stove that I paid 700.00 for that does not work and I have 4 children to feed. I am sickened on how Whirlpool can do this to a hard working family that just wants a good stove. I hope this helps another hard working family. Do your research before buying from Whirlpool. I wish I would have.

I bought all my kitchen appliances in Home Depot 4 months ago (April 2014). The wall oven, Whirlpool, never worked. Flamingo Appliances is the name of the company that does services for Whirlpool in my city. They keep changing parts and today is the 3rd visit that the technician will be in my house trying to solve the problem. Customer service in Michigan is DISGUSTING! I probably have to buy another oven because they say they wont replace it if they think its fixable. 3 MONTHS! I will never buy Whirlpool again. I hate them.

The stove started having problems about 5 months after I bought it new, it had a 1 year warranty on it so the first repair was covered but it begun to have the same problem a few months after the repair. By the time I contacted the company they told me the warranty was expired and ask if I wanted to buy another year of coverage for $300, of course I said no. I repaired it myself and once again it worked for a few months and now the problem came back. Will not heat up so dont waste your money.

DO NOT BUY ANY WHIRLPOOL PRODUCTS! After purchasing a dishwasher in April 2017, it died after a year. The subsequent years have been filled with waiting all day for service repairs 6 times and living without a dishwasher for up to a week at a time. After 6 services the product continues to malfunction. They are refusing to replace the item and now inform us that we must pay to have it serviced. I cannot stress enough that no one should purchase any products from Whirlpool as they are sub-par products and they do not stand behind their products.

I bought a top of the line Whirlpool dryer that cost me over $1,000. Havent had it for a month and it requires a service call. Have to wait two weeks for service! Totally unacceptable. The dryer is JUNK and now I am stuck with it. Horrible company. Bought from Home Depot.

Purchased a G16SDRXX07 three door Whirlpool refrigerator two years ago. Ever since new, when there is a very short power glitch the refrigerator shuts down and will not re-start without manual intervention. This happened at two months. Whirlpool replaced the boards. Still does it. Also when this happens the water dispenser will no longer dispense continuous water. It stops after three ounces. Now they want to charge me for a service call and parts to correct a problem that is obviously built into the unit. There should be a recall on this. Whirlpool should correct the problem free of charge as it is obviously an electronic design issue. Upgrade the necessary control board and replace it. If not, after being a loyal Whirlpool customer for 42 years, we will replace this unit with a different brand that Whirlpool does not build.

I have never had such a horrible experience in my life as I have with Whirlpool. Refrigerator ($2,500) broke within three months, and then broke again another two months later and hasn’t worked right since. They have the most horrible customer service, parts are on back order, I’ve had to throw away hundreds of dollars worth of food because everything keeps freezing but they do not care. Ice machine has been broken for over a month for the second time. They are the worst company I’ve ever dealt with. Buyer beware. Do not buy anything from this company. Their products are the worst and they have zero customer service. Good luck if you buy something and it breaks. You might as well just buy a completely new appliance.

I bought a new washer thinking I was upgrading. Wrong!! Well the new so called technology they put into these machines is overrated. They took a good thing and instead of advancing they have took two step backwards in time. I wish I had kept the old washer I had. I think I would rather use an old time wringer washer my great grandmother used. They are probably faster by hand. This new Whirlpool grabs every string on my hoodies and twist my clothes so tight in knots. I cant even remove my clothes until I fight and get mad enough to write a review. Whats up with these new washers?? Get rid of the slots on the Agitator!!

I purchased a total of four Whirlpool appliances in June of 2008. Almost thirteen months after the installation of all four appliances, I experienced a problem with the control panel on the Gas Range GW397LXUB, and a sensor control problem with the Microwave GH5184XPB5. Fortunately, Whirlpool agreed to repair the appliances at no charge because it was so close to the end of the warranty. The microwave was an easy fix and simply had to be unplugged, reset and plugged back in. However, the entire electronic control panel had to be replaced on the gas range. Several of the buttons simply stopped working and I was only able to bake at 350 degrees. Again, almost thirteen months after the installation of the new control panel, it happened again. Same buttons stopped working. When I contacted Whirlpool, they refused to replace the part because I was no longer under warranty. Whirlpool refused to admit that there was a problem with the control panel, so I guess it was a crazy coincidence that I experienced the exact same problem on both. I filed an official complaint with Whirlpool in hopes that if enough people do so, they will issue a recall. I am now experiencing a problem with my refrigerator ED5FHAXSB03. The fan vibrates so loudly that you can hear it throughout the entire house.

Whirlpool oven aqua lift - This oven is the worst in the world. I cant even imagine cooking a turkey in it. After cooking a pizza it took four cleanings and a lot of scrubbing. Self cleaning --- not, you clean and clean and clean. I have had ovens that were not self cleaning and easier to clean than this. Do not buy. And Lowes is no help at all. Run as fast as you can.

Purchased from Home Depot and self-installed. That part was not too big a deal but after installing this stove we started a journey of irritation, aggravation and general dissatisfaction. This stove has the standard layout for burners that seem to be common to most low-end stoves. Two huge burners in the front, a simmer burner at the right rear and a general purpose burner at the left rear. Thats all wrong for me and our set up. I want a large burner at the left rear and general purpose every place else. Can you alter the standard configuration? NO! Not without some major alterations to the stove top.Next are the grills or cast cooktops (2 each). They are a bit cumbersome when cleaning the stove but doable. The real problem with the grills are Whirlpool decided to save money by skimping on this feature. The grills are not a stable cooking platform for smaller pans and it turns out Whirlpool recommends square pans for this stove. SAY WHAT? I have pans and skillets from my grandparents and they are ALL round. Thats how that stuff is made. ROUND! The grills design is unstable for any round pot, pan or skillet, if its diameter, is 6 or less. Kiss that excellent saucepan goodbye if you have this stove. My current solution is a piece of light expanded steel over the burner areas.Keeping in mind we use Propane as our heating gas. The adjustment of the flame temp on the four burners is non-existent. They all are either on high, medium or low. There seems to be no fine tuning with these burners. At the end of the day go look for something that is NOT a Whirlpool, LP gas range Model #: WFG515S0EW. You will be better served and less irritable with almost anything else. Even a campfire in the yard is a better choice.

Always buy an extended warranty if you are going to buy a washing machine. Mine cost $129.00 extra and it is not through Whirlpool. Three control panels and two tub bearings later, the extended warranty insurance carrier gave us our money back to buy another machine. My wife loves the operation of the Cabrio, so we bought a WTW8200YW today, in the false hope that it will work much better. We have an extra washing machine in the garage for the three week period before repairs. The serviceman has to come look to verify the problem, then come back when the part arrives.

I think the whirlpool washer is a very nice machine. I think it does a good job of cleaning but still has the tub odor problem that a lot of front load machines have. As far as reliability it has done pretty well but I did have to replace the tub bellow and it is only 5 years old. It also makes a lot of noise so it is not a quiet machine at all. The steam option on the washer is a nice feature but not sure how much it does to help clean stuff.

Great fit and easy for kids to use. Has preset buttons for easy use. This oven is sharp looking. Very easy to clean. This oven was a great value for the money. I would recommend this microwave to anyone and family members.

Cabrio Washer - We were getting unbalanced load messages and the washer would stop. I called in a serviceman and he said it wasnt worth fixing. It would be cheaper to buy a new one. This washer is only 5 years old.

I purchased a washer, dryer and refrigerator from Sears and it has been a terrible experience! The fridge broke twice, the dryer broke twice, and the washer broke around four times! I was told that since they fixed it last time for free, this repair was on me! If all the items didnt break numerous times, I would not be upset. But for all the items to break so many times, thats telling me that I shopped at the wrong store! The Whirlpool Cabrio sucks! So, I was told by Sears on 8/1/11 to ** it up!

Whirlpool water heater FG1F5040T3NOV - I noticed that when I was taking a shower, my hot water wasnt working. I went downstairs and the pilot light on my water heater wasnt on. I tried to restart it. The pilot light wouldnt work or relight. I gave up and contacted a plumber. I dont feel I should have to pay for a plumber when its a product flaw!

Bought unit from Lowes in july 2017. Shortly after icicles started forming on the roof of the freezer near where the door & frame meet. Called authorized service repair company to have them check out. Tech knew right away what was wrong. Appears Whirlpool has the parts made in China & then assembled in the USA. China has overfilled the freezer door with insulation warping the door. This makes the door seal sag on the bottom & pull away on the right side. No way to repair. Was told they need to order a new freezer door.Weeks later I get a call that Whirlpool cannot get a door replacement!!! Said they will give Lowes a store credit. The floor model at Lowes has the same defect. When Lowes ordered a replacement unit they opened the packing & found that this unit has the same defect. I am replacing with a Frigidaire! Where is the quality control at Whirlpool. Anyone at Whirlpool who puts these units together could not help but see this defect - but ignores it & ships it out anyway. Thats what you get from farming stuff out to China. No excuse on Whirlpools part. Maybe Trump can save Whirlpool.

I purchased a Whirlpool upright freezer from Sears 17 months ago and it stopped working. I find the warranty is only 12 months. I contacted Whirlpool and they left a message on my answering machine that they would not be allocating any funds for the repair of this 17 month old freezer. I spent in excess of $600.00 and I am highly disappointed. I would never buy another Whirlpool anything.

40-gal gas water heater - I own several rental properties and unfortunately put Whirlpool water heaters in them when the old ones go. It is because they are at Lowes and they are cheap. Today, another call came in from a tenant with no hot water. I called customer service and they determined I received the repair kit from an original design defect from back in the middle 2000s. Now 3 years later, it goes out again. Because I have already received the conversion kit taking thermal couple threading from LH to RH, I needed another part number to repair for a grand total of $160! The same part before the conversion kit was $60. I will never buy another Lowes/Whirlpool water heater for as long as I live. I own a hundred rentals and Whirlpool will never again see another cent for the junk water heaters.

My wife and I made the unfortunate mistake of purchasing the Whirlpool Gold Series, model #WRF989SDAM00 refrigerator two years ago...yes TWO YEARS AGO! We have experienced numerous issues with the appliance but our latest (no cold air in both the fridge and freezer) prompted a call to a service center. The serviceman that showed up knew immediately what the issue was, our compressor and evaporator had malfunctioned and according to him, We have seen the same problem in a number of these models and that Whirlpool has since redesigned the casing to prevent this issue in new models. What about those of us who purchased the previous model?! Now shame on us I guess for not purchasing the extended warranty...I suppose I just took it for granted that in todays competitive manufacturing world Whirlpool would be committed to building a quality product! Because of this I was offered two options from Whirlpool. #1 - pay for the parts yourself...over $800 or #2 - purchase their 1 year warranty program @ $350/year, this warranty will cover all parts and labor for an entire year. Based on my experiences though, I will need to purchase a 1 year warranty @ $350/year for the life of this lemon, potentially costing me $5500 over a 10 year period. I ultimately took option 3...tossed the piece of junk and bought a new fridge from their competition. Dont be fooled by the attractive design and appearance, the Whirlpool Gold Series refrigerator is a money pit waiting to happen!

We bought my Whirlpool top loading washer and dryer back in 2005, and they have not disappointed. Apart from needing a heating element replaced due to poor ventilation one time, both machines are extremely dependable and wash our clothes quite clean!

Aug 2012 bought washer, dryer, stove microwave/hood, dishwasher, fridge. $5000 later I had a service call on washer. Clothes stuck in washer for over 3 days to get fixed. Oven igniter has went out for the third time, 1 broke knob on stove. Dishwasher leaves dishes wet after cycle. Fridge handle fell off, crisper drawer rail broke off, and a door shelf is cracked. I am a veteran and unemployed. What happens when warranty expires and all my CRAP whirlpool breaks a week later? Also was told warranty doesnt cover the crisper drawer. They didnt tell me that when I purchased at Spencers on 75th ave and Bell road. Salesman at Spencers, Dan ** told us everything is covered. Im not a happy customer or VETERAN!

Our machine was bought via the employee purchase program. Its just under 2 years old and the bearing has been out for nearly 6 months. I called Whirlpool and our local Whirlpool repairman. They both want hundreds of dollars to repair it. Being pretty handy, my husband and I decided to fix it ourselves. Trying to find compatible parts for this model is a NIGHTMARE. Everything in my house is Whirlpool...range, dishwasher (also junk), microwave, fridge, washer, dryer...and it will all be systematically replaced with ANYTHING BUT WHIRLPOOL OR ITS COUNTERPARTS.

We purchased a Cabrio washer in August 2013, in early August 2014 we noticed that it was not getting all of the detergent out of the clothes (noticed it on the dark clothes after drying). We use less than the recommended amount of HE detergent and dilute it in the dispenser, also always use the extra rinse. We just had a Sears service man out at a $100 cost only to find out that he gets these calls all of the time and the machine is operating at the factory settings.After reporting the problem to Whirlpool all I got was we are sorry and a link to how to operate the washer. In the demonstration video it clearly shows that the water level never covers the clothes. I know Im old school but in my opinion the water should cover the clothes so it can properly wet and agitate the items in the washer. To say I am less than satisfied is a gross understatement. Im out the cost of the washer plus an additional $100 and after a year of ownership and contacting Whirlpool less than a week after the factory warranty ran out all I get is an Im sorry you do not know how to operate a washer.

What is the brilliant idea of a mode dial on a washing machine that needs to be pushed in or pulled out to engage its function??? In other words, why is there a free-spin mode of THE DIAL itself? Okay. IN OTHER WORDS, why not just let the handle part of the dial stay affixed to the red line mark, so that they continuously turn together at ALL times???

The oven works well. My complaint is that the glass door is very difficult to clean. Some kind of liquid got in between the panels and I cannot clean the glass without removing the oven door. Im afraid to remove the door as I may not be able to get it back on the oven. I have dirty glass I cant clean and that makes me unhappy. Otherwise the oven works just fine.

We bought a small refrigerator/freezer Model WRT112CZJZ for a guest house. When not in use it was turned off at the unit control panel with the doors left open. There was a power failure and when the power was restored the refrigerator turned itself back on. Needless to say it must have been running for 2 weeks with the doors open and the condensation filled the holding tank and then proceeded to overflow on the wood floor. The floor was ruined. There was no indication in the manual to warn of the unit restarting when power is restored so it must be unplugged or the circuit breaker turned off to avoid a similar problem.

Whirlpool has been a well known brand for many years producing well made appliances. With strong customer support and appreciation. I myself have owned many appliances made by Whirlpool from Fridges to Washers and Dryers with no problems.

I have the same pilot light problems as everybody else. I pulled the burner unit out, and cleaned, and blew everything out, and took a wire brush to the openings on the floor of the unit. I called customer service, and was asked about ventilation. I didnt mention that the heater still didnt work, even when the door to the tin water heater was removed, so venting is not the likely culprit. She authorized a repair that will likely do nothing from the comments I see.The real problem with their customer service, is the apparent stupidity of the computer system. She asked me for the model and ID number. I had to cut through the extra insulation blanked on the tank to get it. However, when I gave it to her, she then asked me if I was ** and if I live at **. If this information was already in the computer, why couldnt there be a search by my name and address, to get the model and serial number. Obviously, I had registered the water heater in the past. Isnt being able to get this information the reason to register in the first place?Now, I have to replace the extra insulation, all because of a stupid inability to create the necessary searches in their customer database. Yes, I could have written the numbers down, but why have the customer registration at all, if it isnt to be used for anything, other than data mining of the customer base.

August 10 2014, I purchase a new Whirlpool HE. Monday cant wait for the delivery of my new washer! Im ready with my HE detergent & 2 loads of dirty laundry. Tuesday, I want my broken old Kenmore washer back! My kids clothes came out dingy. Did a second rinse & spin but didnt help. Second batch had to be rewashed. Some areas were not even wet. Had to pause it to add more water to & again to rinse it. Plus I had to mix my softener into a cup of water to add it on rinse because I forgot the rinse ball, unlike the old washer where I add into dispenser & forget about it. So unhappy & dissatisfied.

We purchased the Top Loader Cabrio in 2006 for $1100. About 1 yr. later it just stopped, but was covered under a recall. A year later it stopped working again and cost $400 plus we bought a 3 yr. service contract for $350. A few months after the service contract ended, the spin cycle got very loud and it started leaking grease and water. It now need a ball bearing and $600 of work. So now we spent almost $2000 for this washer in 8 yrs. Our Maytag was $400 and lasted 15 yrs and we gave it to someone else who is still using it and we never had it repaired. It sounds like Cabrio customers have been complaining about the same issues for several years but they keep recurring and Whirlpool is doing nothing to correct them. We are not putting more money into it after reading all the complaints. We are buying another washer and another reliable brand. I would have been a customer for life because I did like the way it worked and cleaned, although I hear so many people had problems with that so I am not waiting for that to fail too. And I recommended the Cabrio to several people who bought them and now I hear they are starting to have problems. You should stand behind your product and correct these problems and recall or fix them at a reasonable cost.

My microwave came with my house. I didnt choose it but it has been a great brand. I love the preset timers for defrosting & for popcorn. Its big enough to handle an 8x8 pan which was important to me. The turntable could be more stable. My model is a built in over the oven option. Black & digital. It has lots of preset options & is pretty user friendly. I like the size & it is super quiet.

I purchased a Whirlpool Cabrio washer model #wtw8200yw in August 2012. I just purchased a new washer today (Jan 2018) to replace it! We have had to replace the lid lock twice, then the cycle knob would only work on the normal cycle. Last week it started to sound like it was going to take off! Had a repairman come and the bearings went out in it, will cost almost $500 to fix! Not spending another dime on this junk! I purchased a new washer today (not a Whirlpool either!)

We have had this dishwasher since 1983 and we still run it on an average of 6 days a week. Features are the fact that it has given all of our dishes, our silverware, our pots and pans sparkling clean looks for all those years. It fits nicely into the kitchen space which was designed for a dishwasher. It never needed a repair. After all those years, this machine still looks fine. After all those years I really doubt if it still has a warranty and it never needed service.

I’ve had my washer and dryer for a long time and it has been okay and it’s time to update. It has had its up and down and I may get another just after a while they are outdated and better appliances come along. Smarter people are making smarter things.

The capacity is small but it does a good job of washing and drying the dishes. I always check to make sure that all dishes are washed including silverware and they are. My dishwasher is quite old but it is still sufficient for our use.

In August of 2008 I purchased a Whirlpool Amana refrigerator, Model# ABR2227FES. It worked great for exactly 6 years. In Aug of 2014, the motherboard needed to be replaced as it was not forcing a defrost when needed. I tried to get a refund on the cost of the part and labour but both were refused. In Dec 2016, just two and half years after the motherboard was replaced, the exact same problem re-occurred. Again I tried to get a refund on the cost of the part and labour but both were refused. Will I be buying this refrigerator in the future? A definite no!!!

We had purchased matching Whirlpool Cabrio HE washer and gas dryer. Both appliances were worthless. Same problems as everyone else. Clothes did not come clean. Had to put it on bulky items just to clean the clothes due to lack of water. Funny how all the older machines that actually put water into the machine cleaned clothes. Went through a motherboard (computer) for both the washer and dryer at $250 each. Washer had repairman out at least 12 times over 3 years. Never again would I purchase a Whirlpool. We went to our local appliance dealer and purchased a Speed Queen. These are like the older ones. THEY WORK! They use the correct amount of water and wash your clothes in half the time. 22 minutes per load! You can open the lid while the water is running in and load your clothes. Gee, what a concept. Only company still making them in Wisconsin, United States. Go Wisconsin! They back their product with a 20 year warranty. What?? Who does that anymore? Companies who stand behind their product. We love our new Speed Queen.

The washer buttons stopped responding after 19 months. Lid lock sensor didn’t work. Replaced control board because new sensor did not fix it. Went bad again after a week. I have to replace it. I think 1 year warranties are not enough for a major appliance.

Whirlpool washer WTW7800 Cabrio - I bought this machine in Oct 2010 for $900.00. This October, the lid started not closing. Next thing I know, the glass is popping out. After waiting on hold for 20 minutes, I was told there is nothing they could do but refer me to a repairman at a cost of $179. The glass is popping out. This is a defect not caused by washing clothes but poor workmanship. I am on hold again. I am calling channel 3 news to do a story and will not stop until it is fixed.

I have the 4.3 cu. ft. washer. This washer worked OK, but the lid lock does fail after about one year if the washer is in an environment where moisture may be present.I noticed the lid lock not working all the time about two months before the warranty expired. If this happens, call the warranty department immediately. After checking the ground wire and resetting the washer power over and over again, the lid lock finally stopped working completely. Here is how to fix it:There are two screws on the back of the top portion of the washer. Unscrew them from the silver straps. The washer lid will now push forward and up and off. Prop it up with a stick.Unscrew the two screws on the lid lock and start taking it apart (after reading this entire review). Be careful not to lose any parts and be sure to know where everything goes for re-assembly. Take pictures if necessary. Take the lid lock completely apart including any small pieces.The plastic slide needs to be cleaned. It has a spring that may fall when you pull it apart.The metal contact points inside the lid lock mechanism need to be cleaned. Be extremely careful when pulling the red cover off of the housing assembly. Pull the four metal contact points completely out of the plastic assembly. Be real careful with the black plastic slide piece, the metal rocker switch and the switch actuating motor. Use a small file and rubbing alcohol to clean off any green or white corrosion. Make sure to check all contact points.Re-assemble and you will immediately notice the lock switch working better. Re-install onto the machine. Re-install the upper portion of the washer. Start your laundry. Repeat after one year or when the lid lock becomes faulty again. These points should have been made out of a less corrosive material. Poor craftsmanship. Would not recommend.

I was searching online and stumbled across this site. Funny that there were so many complaints about the console on the ovens, considering that my issue was with the console on a dryer I purchased. I have only had the dryer a year, and it stopped working. There is nothing else wrong with it, no codes, no problems with the lights, or anything else. A technician came out and found that it was a small plastic and metal button piece that helps the press here: spot on the dryer panel to connect to the start button on the console. The little arm had broken and the switch no longer worked.Figured we would have to purchase a new button. NOPE, apparently we were told that we had to purchase a new console (over $200 dollars, close to $300 with shipping)???!!! We were also told that wear and tear can cause the issue. Wear and tear?? On a dryer thats maybe run once a week for about a year? Try again, I think I need my boots because it sounds like horse** to me. I think I will pass this information along to people I know that are technicians so that they can let people know not to purchase from this company because they obviously arent going to address the situation. I think I might also utilize social media to let people know so that they dont have to go through this much aggravation. I certainly dont know what we are going to do, since it took me a year to pay that dryer off, I cant afford another dryer at this time. So unfortunately with a new baby on the way, you wont get any sympathy from me if your company takes a character hit.

I have raised complaint regarding my refrigerator and changed compressor and they given me 1 year warranty but after 3 days again compressor gone and they have came and replaced that and taken service charge. Again after one month compressor giving problem and freeze is not getting defrost.. Again I called to customer care but again they want Visiting charge.. Really pathetic Service I ever seen. And customer care people does not know how to handle client and repeating same line. Dont buy anything from Whirlpool.. its worst service provider.

On 12-22-13 we purchased a new Whirlpool Washer- Model=Top Loading-WTW4800BQ. We also purchased Lowes extended warranty. Washer was delivered on 12-24-13 around 1:00pm. Connected washer. Washer filled with water. System started but would not wash. 10 minutes later it rinsed and drained but would not go thru wash cycle. We clicked the cancel button for 3-seconds to restart. Same problem. Called Lowes - Lady name Kelly continued to tell us we did something wrong. She would not listen and continued to say its Christmas EVE. Finally the workers came out to check it out around 4:00. Confirmed washer is defective and new washer will be delivered on 12-26-13. Confused as to the label on the machine says made with pride in America. Our 20yr. old Cabrio only lasted two years and went up. Never buy another Whirlpool product!

Today, after five years of washing items in the Whirlpool Cabrio top-loading, HE washer; I am taking the time to express just how poorly this machines operates. Clothes do not get clean, dish towels with dried food still have food on them, and towels get holes. If I wash items with sand after going to the beach, the dryer vent has to catch all of the sand that was never washed out. Rust has developed on the inside and drips down to ruin clothes. I would take back my previous washer with the agitator that was over twenty years old in a heartbeat. When we needed a new dryer, we went ahead and bought a matching washer. Painful decision!

I bought my fridge 6 years ago. 13 months after purchase I had to replace the compressor. Last month I had to replace the water drip pan. Now the fridge is knocking and hissing again and warm inside. Compressor needs to be replaced. I contacted Whirlpool and they said 6 years is old for an appliance. Seriously!?? What about 13 months when the compressor went? They obviously dont stand behind their products. They are unable to admit I got a dud. Im so disappointed and frustrated. Stay clear!!!

My fridge is over 10 years old and the compressor has not failed. I have replaced some of the bins that have cracked or been broken over the years. It is a side by side in black color and will probably replace it with another type but the same brand as long as it is economically feasible to do so.

I purchased a new Whirlpool Cabrio washer 3 years ago. It is the worst washer I have ever owned. During the first year it had to be repaired. It continuously flashes F51 when I try to wash a load of towels or bedding. I am beyond fed up with this machine and will NEVER purchase another Whirlpool product. If you are considering purchasing one of these I would tell you not to waste your money.

This is a horrible washer. It leaves a white residue on dark clothing and the clothes need to be rehashed. There is water that settles in to the fabric softener dispenser. Now the washer is leaking. My husband replaced the tub seal or whatever since he found this could be the problem while searching the internet. It is still leaking and we have no idea from where the water is coming. I agree with the other person that the Whirlpool customer service cares not that theyve manufactured a defective product.

After proudly bringing home a new Whirlpool gas hot water heater NU40T61-403 day 2 no hot water. Wait 10 min and reset. This became a 3 times a week habit and now it will not relight. The repairman they sent out wanted us to rebuild our house to conform to code. Our old heater worked fine in this location. After talking to their tech, they sent us new parts overnight. Still cannot get this thing to light. All we want is hot water!!! Calls to the tech line end one way, it has to be your fault. I worked for The Gas Company!

I owned a Maytag washer for 30 wonderful years, so I of course bought a new one. I have battled with my Maytag (Whirlpool) front loading stackable top of the line washing machine for 2 1/2 years. It will not drain, yet sometimes it will. I have played every game with this machine to figure why. I had a repair company out 5 times while it was under warranty and they could never find the problem. It is totally unpredictable. If I could bill Whirlpool for my time and anguish I would own this company!They now say it is the computer board and I will have to pay $350 for a new service contract to fix the machine. I not very politely said that they should pay me for all my emotional abuse. They offered me another option saying they would pay for a service company to come out and look again. However, I would have to pay the labor and material cost. Since I have a stackable unit and it would take 2 technicians I would have to pay $90 for the second person. I was so mad that I called Whirlpool back and they refused to offer me that $350 charge and just said sorry. I are fortunate to have a lake house which needs a new washer. Guess what? It will NOT be a Whirlpool product. I wish I could go to the store where I purchased this holy terror and picket!

I bought a Whirlpool Cabrio washing and dryer in 2011. I have replaced the lid on the washer 3 times. It comes apart in the back of the lid and it will not lock in place so it will perform. I have called the manufacturer several times. They have not been of help as to why this happened. Im upset. They have no suggestions. I have owned Whirlpool appliances for years and this is the 1st time this has happened with no resolution. I just want it fix or explain why its happening.

I love the convection cook top! It is very responsive. Its about as responsive as gas, which saves a significant amount of electricity! But, it is WAY easier to keep clean. I also love the warming burner! Having that 5th burner in which to keep something warm, while you finish other things in the oven or on one of the regular burners is very helpful. Its also great for melting butter. The ability of the oven to delay the start of cooking and program cooking to finish at a certain time or in a certain amount of time is also very useful when you cant attend to starting or stopping cooking in the oven.

I purchased my Whirlpool Cabrio H2Low from Sears 6 years ago. After numerous problems with clothes not getting clean (soap spots, stain transfers, etc) I learned the only setting I could use that actually cleaned was bulky with an extra rinse (so much for the energy efficiency). My first major repair was in the first year. Weve since had 3 more and the darn thing died again this morning. First the motherboard died and needed replacement, the drain pump failed, the door lock failed, and twice now it stopped spinning. At first I thought maybe I was just unlucky and bought a defective machine but repair sites are filled with reports of similar problems with these machines. I will never buy another Whirlpool product again.

Here is my TERRIBLE experience: After only eight months it started to fail intermittently. Within weeks, it failed completely. I pay someone to come out and look. We get a part from Whirlpool. Pay extra to express ship it. 2 days later, pay to have it installed. Still doesnt work. Express ship another part. 2 days later, pay again to have it installed. STILL doesnt work. Express ship ANOTHER part. 3 days later - it STILL DOESNT WORK!!!!! Then they closed - wait another day. Now they authorize a complete replacement. Wait till Monday to PAY to have this one uninstalled. Haul it upstairs, into my car, back to Lowes, so I can get a new one. Haul it home. Pay AGAIN to have it installed.I was without hot water for 10 days and paid about 4 time the cost of the heater in labor to get through this MESS. I talked with Customer Service to get some help with how terribly unfair this was. Warranty Only Covers parts - should have bought the extra warranty... Silly me - I thought Whirlpool was a reputable and reliable brand. Boy was I WRONG!!! DO NOT PAY EXTRA FOR THE NAME - NOT WORTH IT!!!!!! I also dont recommend paying extra for the Energy Efficient. Its added electronics that just give it more to go wrong. Plain and simple is the lesson for the day!!! And after the hours of frustration with their customer service - Ill NEVER buy another Whirlpool product as long as I live!!!

Cabrio top load HE washer - Ive only had the washer a couple of years. My husband bought it for me thinking it would make washing more time efficient and energy saving. Lesson learned! After struggling with this washer for the past year, I was told today that to repair it, it would cost around $800 or I would need to buy another washer. The washers bearings and tub need to be replaced and it will not spin properly or at all. Previously, I have owned washers for over 10 years each. This was definitely not a good purchase. After reading all of the other complaints on this site, I understand that I am not alone. It was also mentioned on one complaint of the possibility of a fire hazard with this washer. Whirlpool should be recalling.

Bought a Whirlpool Cabrio. Noticed it was getting really loud less than a year into owning it. Called while it was under warranty. The tech said it was fine. Within the next year and a half it got so loud, you cant hear anything else in the house while it is running. Now it is leaking from the tub seals and the bearings are going out according to two service techs I have had come look at it. They say it is more expensive to fix than the washer is even worth. This is due to the parts that would be used to fix it are the same cheap Whirlpool parts that were put in it in the first place. They both said that these are not good washers and commonly go out about a year and half to three years old. Shame on Whirlpool for making such a low quality product and not being willing to do anything about it.

Ill never buy Whirlpool appliances again. I purchased all new kitchen appliances less than 3 years ago. The range had electrical issues within the first year, which was extremely scary. Thankfully because of the warranty they took it back, reimbursed me for it and I replaced it with a GE. I absolutely love the GE. The dish in the microwave never stays on its track in the center. Its quite an inconvenience to fix it almost daily. The top rack in the dishwasher constantly breaks, drops down on one side. Random parts from inside the dishwasher constantly come loose and fall off. But the worst of all....my refrigerator has broken down twice in 6 months from the same issue due to no fault of my own. To give some credit, Whirlpool fixed it out of warranty the first time. However the same issue happened 6 months later and they are expecting me to pay for it. The repair company contracted with Whirlpool covers their parts under warranty, however different parts need to be ordered. I had to pay for these parts, a service call and labor. Whirlpool came out with a service pointer on this because they know its a manufacturing defect but are refusing to cover the cost. The representative I spoke to was nasty and inconsiderate but sadly the manager was even worse. DONT buy Whirlpool!!! I recommend GE, youll be much happier. Worst customer service and support.

I purchased a Whirlpool Cabrio washer in 2007 and had to replace the control panel for $300 each time twice.

The pilot light on our hot water heater will not stay lit. We cant find the custom made Replacement Kit at any local retail locations, including a specialty appliance repair store, Lowe’s or Home Depot. So our only option seems to be waiting for the part to come in the mail. Meanwhile, my two little girls have no hot water in their home! Not because we couldnt afford to pay the gas bill, but because of the piece of junk hot water heater that we purchased and the lousy company that stands behind it!

I bought a Whirlpool larder fridge 18 months ago. It suddenly stopped working so we got a service engineer up who said there was no gas. He said it would cost 50.00, but with no guarantee it would work afterwards.

I bought a Whirlpool refrigerator model GSF26C5EXW02 from Lowes. It is a huge piece of crap that has had so many visits from the Royal Appliance guy, that we are now on a first name basis. Lowes was awesome and has actually replaced this junker twice at no cost to me and has, in fact, reimbursed me for all the food this fridge has ruined by freezing. The appliance repair guy cant seem to find a problem so I just keep getting ruined food because of this hunk of junk.

In 2013, my husband purchased a Whirlpool Hot Water Heater model #E2F40RD045V 40 gal. from Lowes in Vancouver, WA. On 12/12/15, had to call a plumber, the hot water heater was intermittent hot/cold. He flushed it, checked all power connections and changed the elements. On 3/18/16, NO hot water. Having a 6 year warranty, I called Whirlpool. They gave all kinds of excuses and told me to try a bunch of tests. By the time I got back to call them they were closed. I called them again on Monday 3/21/16 and said nothing worked and it had popped the breaker. They said change the elements. I told them I had just changed the elements 3 months before. I told them it was faulty wiring. They said the top element must be faulty. I gave up at that point and called the plumber. He came right out the next day. I had purchased a Rheem hot water heater to install and asked him to check the Whirlpool hot water heater elements he installed before he removed it. That is when it was discovered that under the insulation around the bottom element it was all scorched from FAULTY wiring. I called Whirlpool again and told them I could send them a picture and they said dont bother and immediately gave me an RA to return the hot water heater to Lowes. I told them I had already purchased another hot water heater and it was not a Whirlpool. I am going to request a refund.

Whirlpool WRF993FIFMOO: Refrigerator Problems: the doors do not close, both ice makers went out, The computer on the filtration will go off. Refrigerator had problems maintaining temperature since 8.12.17. The refrigerator no longer works. This is my second unit since 11.09.16. It came from nfm.com.

We purchased a Whirlpool front loading washer about three years ago. During our first year the machine worked OK, but three months after warranty expiration (12 month warranty), the sensors seems to go wonky and it no longer worked (at 15 months of age). We paid about $95 in the Minneapolis area for a service call. The repairman had to call Whirlpool from our home to inquire about the sequence of flashing lights on the sensor. After getting off the phone he told us he thought he knew the problem, but could not guarantee that the $200+ part he suggested ordering would solve the problem. The installation would require additional labor charges, of course. I reported the incident to the manager of the repair service and was told the repairman was expert in Whirlpools but this did not further inspire confidence. We were not willing to sink this amount into the machine, so ditched it and bought a top-loading inexpensive Roeper. The top-loading machine definitely appears harder on the clothes than the front loading Whirlpool, but it gets the clothes cleaner and has been problem-free so far.

We bought a refrigerator Model# WSF26C2 EXB last June 2012, and it broke down! Our one-year manufacturer warranty did not cover for any food loss. We would not recommend Whirlpool refrigerator to anyone. We called at 12:30 pm and they could not send anybody out to repair the refrigerator until the following day. Bottom line is, there is no compensation with Whirlpool.

I have a whirlpool water heater. This is the third or 4th time that the upper sensor failure code has come on. Our water heater turns off all the time and we have to fire it back up. In the past few months, it has started pouring water out from the long tube on the side of it anytime we turn it on for more then 10 minutes. The last time we called a plumber, I was trying to get a quote on a tankless water heater. Ive been so fed up with ours and I thought that would be a better route to go. The plumber explained the negative sides to a tankless water heater and explained that our water heater was a really nice, really expensive and fairly newer model. I told him that I had just gotten it about four years ago. He said he could just fix that one. So after looking at it, he acted as if he didnt know what an upper sensor was and told me it was under warranty and that I should call for the parts. Every time we have called for the parts, they send the same box thing on the front of the heater and every time, it doesnt fix it for long before it says the same thing. And now, like I said, the water heater has now added the problem of pouring water out of it. I need help. I dont know what to do. Im tired of not knowing if Ill have hot water or if the water heater is going to pour out water. Im pregnant and worried that if we cant get this fixed Ill continue to have this problem along with having a baby to take care of. Please help.

I am getting numerous F1 codes on my Whirlpool Cabrio washing machine, Model #WTW6600SW2. By doing thorough research on this issue I can see the problem is in a known defective control board (part #W10130544). This part has even been replaced by Whirlpool with a new control board costing around $300 for just the part. After calling for repair service, two people (1 agent and 1 supervisor) refused to acknowledge any known issues with this part and further refused to any type of repair or replacement of the part. It is impossible for anyone in that position to not have knowledge of this problem. Simply look on the internet for a countless number of people with this very same complaint. Even though my washer is eight years old it has had very little use. There are only two grown adults in this household and the machine has never been abused or overused. It still looks new. Whirlpool should be honest and responsible when dealing with this type of problem. They should agree to pay for the part and repair service... at the very least they should agree to pay for the part.

The Whirlpool microwave stopped working 14 months after purchase. The technician, who was a complete moron, said that he couldn’t find the problem, but took 129 dollars in service fee, which was extortion. Their appliances are ** and so are the ramrods that they hire to service them.

After 7 attempts to fix my 6-year-old Whirlpool Front Load Washer (original price $991.00) I had to trash it. Then I stupidly bought another Whirlpool Front Loader (WFW75HEFW) Feb 2017. It has not worked properly since day 1. The clothes come out dripping wet. At first I thought I was doing something wrong. I tried every cycle, limited amount of clothing and ran additional spin cycles to no avail. Finally I gave up and called for service.Whirlpool is very much aware that a number of their machines came off the line with defective spin bearings but they wont admit to it. Instead I am expected to have it repaired! It involves the entire inside of the machine being rebuilt. Its a 2 man job that will take 3-4 hours.This is totally unacceptable and it is obvious Whirlpool does not make a quality product nor do they value customer satisfaction. DO NOT UNDER ANY CIRCUMSTANCES PURCHASE A WHIRLPOOL WASHER. They are difficult to work with and I for one will never purchase or recommend any of their products. I purchased this washer from Home Depot and now my only hope is that they will honor my intention of purchasing a non-defective product. If not, I guess Im in for another miserable experience with a Whirlpool product.

We purchased our refrigerator about five years ago and we have dealt with it freezing up constantly. The coals and vent are at the bottom of the refrigerator. I believe that is a lot of the problem. We have continuously blowed off the coals to keep it from freezing up but sometimes its still freezes up. I do not recommend the two-sided door Whirlpool refrigerator.

I bought the new Whirlpool aqua clean last year - they guaranteed me at the store it would clean as I explained having a clean oven at all times was extremely important to me. They assured me I would be pleased with the results. I have never disliked an oven as much as I do this one. The tech came to the house and checked the temperature of the oven as I also complained it was baking uneven (the back was overcooked while the front was underbaked) but the temperature was right on so nothing can be done. As far as the cleaning goes all I can get is a new bottom pan for the oven as I have four years of insurance. Not happy as I would like to have a different stove. I WOULD NEVER RECOMMEND THIS OVEN TO ANYONE.

Wish I had done more homework before I purchased a Cabrio washer and dryer. The washer uses so little water that I sometimes find dry spots on clothing when I take it out. How can it possibly be clean if it doesnt even get entirely wet? I now pre-rinse all of my underwear before putting it in the machine. I know the instructions say not to put in wet clothing, but if it breaks sooner, Ill get to replace it sooner with a more traditional model. I always use the lowest spin speed - anything else makes my clothes hopelessly wrinkled. I like the large tub for washing blankets and comforters. Thats about the only advantage I can think of. The dryer sensor quite often goes off after about 2 minutes if I use any setting other than the delicate or timed features. Ive had the machines for 2 years and had the dryer repaired once under the extended warranty I purchased. Very disappointing purchase.

Our fridge was delivered the 24th of Jan. We called on the 19th of June because the fridge stopped working. The 24th Capital Refrigeration came out and said he ordered the parts, they would likely be there on the on Fri. the 28th. On the 5th the parts werent in yet. On the 5th of July I called Whirlpool to find out whats going on and the parts were on backorder. They would expedite the parts. The parts came in the 12th. Our Whirlpool refrigerator was delivered on the 24 of Jan. It quit working on the 19th of June so we called Lowes. They hooked us up with Whirlpool. They sent a tech the 24th. He (Mike with Capital Refrigeration) left saying he ordered the parts and they would likely be in on that Friday the 28th. I call Lowes on Mon. the 1st. They hooked me up with Whirlpool and they said the parts were being shipped that day and should be to Capital Refrigeration on Fri. the 5th. I called on the 5th and now the parts are on backorder (they didnt know they didnt have the parts). So the parts came in on the 12th. Capital Refrigeration came out, installed all new circuit boards. That didnt work, still no fridge (he suggest replacing the fridge but Whirlpool says no). So he orders new parts. He comes out on the 17th and installed new parts (coils and stuff). It worked for 3 days and quit again, I lost my food again. I call Lowes again. They hook me up with Whirlpool. They say theyre sending a different company. On the 19th A1 Quality Appliance calls, set up appointment for 23rd. The come out and say they are ordering the parts on the 25th. They say that Whirlpool said parts would arrive Mon. the 29th. On the 30th A1 Quality said the parts arent in but they have us scheduled for Wed. the 31st. NO PARTS. I called whirlpool and now I find out again they dont even have the parts again (they dont know they dont have the parts). They are on backorder and in a week call them to see if they have found the parts yet.So at the end of a week (the 7th of Aug.) Whirlpool said to call and see if they found this part yet (maybe not). It will have been 7 weeks without a fridge that broke when in use less than 5 months. They have told us the parts would be here 3 times and then find out all these parts have been on backorder every time. The 1st repairman Mike at Capital Refrigeration advised to replace the unit but they are still dragging this out. They did send us $150 for the inconvenience (not for all the food we lost). It would appear it will be 2 months before we have a refrigerator again if we are lucky. Whirlpool is a very poor company that has misled us several times and are still doing so. We purchased their refrigerator, double stacked oven, microwave and dishwasher and are very sorry. They say they record the calls if there is any doubt about my facts.

Whirlpool is not what it was before. I got this set with new house... They are very poor construction. They are not even close what I have before the LG. After 6 months I begin to have problems with the dryer... Technician come two time to fix the problems. Quality of washing is OK though... That going to be the last time I got Whirlpool products. For sure.