My Whirlpool Cabrio cannot wash sheets, blankets or any of this size. It balls up in the middle and form a bubble and only part of the items is washed and washing powders are trapped. I have purchased more sheets in the past 4 years than I have in the past 45 years of doing laundry, because the washing powders are not washed out. I wash on second rinse also, never fails and it still does not get all of it out. The clothing gets off balance if it was more than 3 small items. I have a leveling tool that I put on it often to make sure it is level. It’s something within the machine. I will never, never, never purchase any more Sears’ product. If anyone has jury-rigged this machine to work, please let me know. Sears has refused to help me, even today.

We purchased an electric range model WFE371LVQ O in June 2010. This range is only used during the winter months in our vacation home. In January 2016 the oven turned on by itself. The control panel was replace. It happened again on 1/25/19. IT IS A FIRE HAZARD!! Thankfully we were home both times. The only way we got it to turn off was to flip the circuit breaker. If this would have happened when we werent home and a fire started and it killed our dogs I have no idea what I would do. Im not even attempting to have the control panel replaced again. Well be buying another brand. I DO NOT RECOMMEND THIS TO ANYONE. The company must have known about the issue because when we called the first time it happened, which was several years PAST the warranty period, they didnt hesitate to do the repair free of charge.

I had to purchase a new fridge quickly due to a power surge and this was the only one available with features I wanted. It is too small, but thats not the fridges fault. Has worked well and easy to clean. Simple white fridge that Id recommend. Not expensive and for the past year+ dependable.

Note that most of the complaints are about gas water heaters, but the electric water heaters dont seem to be much better. Mine, barely made 4 yrs old and both elements and thermostat went. Had plumbers in for estimates in to repair - much cheaper to install a new one (No...not a Whirlpool!). Very disappointed in the product.

Bought a Whirlpool fridge (WRF560SFHZ) 3.5 years old not cheap! Suddenly one day, the freezer drawer cannot close properly. Since it broke down on a long weekend, I have to wait 3 days in order to contact Whirlpool customer services. And then wait for another 4 days for them to send a technician. The technician advised it is a screw on the rail fall down and he fixed it and charged as 115CAD repairing fee (for a loose screw). He said it is a product defect from Whirlpool and that we should call Whirlpool to ask for a refund.Of course after a long wait from the hotline, Whirlpool refused to refund, saying that, It is not within warranty period and it is perfectly normal that you paid for 17** CAD fridge and can only used for 3,5 years and that things happens (screw can get loose). The service rep. even said, You bought it, it is your property now... And they dont care you have to throw away food in the freezer since the door cannot be closed. And of course they refuse to admit that the product has an inherent defect... Will never buy this brand ever again!

I bought my first refrig. on April 2, it was delivered on April 4 this year. Plugged it in---it didnt work. Home Depot took it right back. Delivered the second one on April7th-- plugged it in--- it worked but WAS missing shelves. Home Depot made sure we got the shelf. The fridge worked for 3 months. Died, it has been 7 weeks and a few days for Whirlpool to make up their minds if I am getting a new refrig or if they are going to try to fix this one. The repairman has been here at least 3 times - all of the working parts have been replaced at least once. The model is WRF989SDAmo3 SERIAL NUMBER **. Do not buy a WHIRLPOOL REFRIGERATOR. Whirlpool do not please their customers.

I have always purchased Whirlpool products and when we were hit with a flood I had to purchase a new washer & dryer. Naturally I bought Whirlpool. I have regretted this purchase ever since. I wish I had known about this website before my purchase & been able to read the reviews. This washing machine is the worst appliance I have ever purchased. The clothes get clean SOMETIMES. It takes FOREVER to do a normal size load of wash. I will have to think long and hard before ever buying a Whirlpool appliance again. I cant believe you ever made such an inferior product. You should be ashamed of yourselves for duping the public.

Had washer less than 1 year and washer stopped and was flashing code F 51. Called Whirlpool and they sent a repair person. He worked on it and didnt fix problem. Called Whirlpool back. They had to order parts. Repairman came back - replaced parts. Now not 6 months later same thing happening. Whirlpool said we have to pay for labor to repair again. We went online after this happened the first time and saw where others had same problem - this washer should be recalled. The repairman said this part was corroding. This should not be happening on a new washer. We will never buy another Whirlpool product again!!!! Im concerned that it will keep repeating over and over and we paid 700+ for this washer not 1 1/2 ago. My last washer lasted 15 years!!! Wasnt a Whirlpool!!!

We bought an oven built in from IKEA - Whirlpool. It didnt work from the beginning. We called for a technician, who comes in the next day, took the defective part and ordered a new one. Took two weeks to arrive. Now I just found out that I will have to wait another week for somebody to come and install the replaced part. I am very disappointed with their way to serve me as a client. I explained to them that itd be nice if the technician it will come at the first hour in the morning ex. 9 am so I can go back to work after that. Which is not possible. The tech is more important than you as a customer. The technician will give you a 2 hours windows to arrive and after that who knows how long it will take the repair. So far I have this build-in-oven in the kitchen just for design, is not useful I doubt that it will be working soon. The lady who called me from Whirlpool Canada was giving me theyre the option in the manner or take or leave it.To be honest, I regret buying this oven, so far I havent used. Wasted my time trying to get them to be more efficient, but got the message from them that I dont matter. Never been treated so wrong by somebody who is working in customer service. The first call it was coming from a company which is located in Maple Ridge, BC phone number 604-466-5597 and when I insisted on having the repair being done asap they hung up on me. I asked for supervisor or a manager, and they told me they are not allowed to give any of those on the phone... Buying this oven was a mistake, trying to deal with them another mistake. I dont recommend to anybody this oven or dealing with Whirlpool Canada.

Purchased a new Whirlpool washer and dryer at HH Gregg about 4 months ago. We complained to HH Gregg that the low water washer wasnt working correctly. It will only get about an inch of water in it causing buttons to be torn off... just beating up wet clothes. HH Gregg told us to try a few things. When we went back to HH Gregg with the same complaints they told us it was too late and call Whirlpool. Serviceman came out and said everything was fine with the machine, we just need to load more clothes! We are only 2 people, one of us wear a uniform and needs washed when we may not have a full load. Called Whirlpool to complain again and they said there wasnt anything they would do except send out another service person for a second opinion, which just means taking more time off of work. HH Gregg talked us in to this type of low level washer. We are still making payments on it!!!!

I am waiting for the third repair on my front-load washer. I purchased them a year ago and was very satisfied with the ease of use. But in April of this year, the E2F3 started flashing up after I put in a load of clothes. I called the repair line and they sent a guy to check it. Determining it was a sensor, I waited three days for the repair. Then, almost two months later, now, it did this again. He called WP and they said to replace the sensor again. I waited two days for the repair. Before he left, he started the washer to run through the cycle - no problem. I then put in a small load of clothes, and almost immediately, the washer stopped and the E2F3 was flashing again. I called for a repair, and am again waiting (without a washer) for the repairman to come back on Tuesday!!!Today is Friday. I have been four weeks almost without a washer this year. Thats also the $20 I have spent this last week to wash clothes at the laundromat, not to mention the frustration of waiting for the warranty line to pick up and the hassle of having someone here when the repairman comes. I am glad I purchased an extended warranty for this product, but Whirlpool should make their products to last!

I thought the new AquaLift cleaning would be the greatest. Boy, was I disappointed -- no thoroughly disgusted and very angry -- when I tried to use the self cleaning oven. I had cooked a prime rib roast and a lot of grease had spattered inside the oven. I wiped away the excess and did a cleaning cycle -- what a joke! There was still grease running down the door and walls. Nothing was changed after two cleaning cycles. Now I have to crawl inside the oven and scrub it manually. I was always pleased with the old self cleaning ovens which only left some ash and a little bit to clean up. The AquaLift technology doesnt work at all, didnt Whirlpool test it prior to selling it to the public? They will surely lose my business and I hope a lot of other peoples business as well. This technology was a huge mistake!!

Bought Whirlpool Gold refrigerator, microwave, and stove. The bottom where the freezer is located leaks if you dont slam the drawer shut - many times leaking regardless. The microwave needs to be unplugged/reset about once a month or so because the power dies - light comes on, food rotates, no heat. And the small stove light indicating the burner is on for the front left burner suddenly doesnt light up. 0 for 3 on satisfaction. Appliances are 2-3 years old. Did not get extended warranty. Everyone tries to get you to buy but didnt realize I was buying junk. Will not recommend or buy this brand again.

We purchased a Whirlpool gas range at Home Depot. After less than 2 years the oven would cut off and the time would start flashing. Check on other peoples problems and found out that I was not the only one. Called Whirlpool and the man on the phone told me I could have a problem with the circuit board. Said he could sell me a 1-year warranty to cover service and parts. I think the best thing to do is to buy another oven and not spend any more money on this junk. Never again will I buy Whirlpool or buy appliances from Home Depot

Purchased the Whirlpool electric range with aqua lift technology. Have the stove for 21/2 yrs and have tried contacting Whirlpool on numerous occasions. Email and telephone. Only response I get from them, is that Im doing something wrong. How can you do anything wrong? Add water, push button. I finally put in a call to World Headquarters but had to leave message and nobody has returned call. I finally called a whirlpool serviceman and he told me the Aqua lift is not a true self cleaning oven. The temperatures dont get hot enough. It was meant to just loosen the dirt on the bottom and then you have to scrub. The button you press to start the process on the stove states SELF CLEANING. I believe they have mislead the public with their advertising. Im thinking about any options I may have.

When received there was a black dot on freezer door. It was replaced. Door handle on doors did not line up. Tried to tell repairman and he wouldn’t listen until the third handle on the refrigerator was replaced. Plastic handle broke three times when under warranty. Now freezer handle has broken! Plastic where screws attach handle is stupid. I’m extremely disappointed in product.

My 1 year old Whirlpool top loader is an absolute nightmare. It does not complete cycles. Stops all the time with various error codes. My washing comes out soaking wet. The pipes on the inside comes loose and floods the house. The machine stops all the time with all the washing clogged on one side of the drum. It is a 16 kg capacity machine but you cannot even think of putting 8 kg laundry in there. I will never, ever buy any Whirlpool product again. Cheap scrap! Thats what it is.

Whirlpool washing machine M# wtw7340xw2 / S# c14270996 - Bought in 11/26/2012. Never was real satisfied with the way the clothes were washed. They never came out real clean and smelled like there was still soap in the clothes. It has been less than two years and now it will not run. Turn the unit on and all it wants to do is turn on the pump to drain the tub. Im a refrigeration technician and know how to run a diagnostic test Whirlpool has for this machine. I get an LF code which is water long fill so I checked out the water tube which is ok. So the problem is in the circuit board not sensing the water level. To replace this board is around $350 dollars and if I had someone else do the work I would be looking at over $550 dollars. I only paid around $500 dollar for the washer so it does not make any sense to put a new solid state board into this washer which cost as much as the washer. Our old GE washer lasted us for over 20 years and did a better job washing our clothes. There should be a better warranty on these machines than one year. I did not buy the extended warranty because of the cost and I expect that the product should last at least 10 years or more.

Bought a Whirlpool fridge in a package from Home Depot three years ago. The fridge has already stopped working. It started having issues about 1 1/2 years in to owning the fridge and finally died 2 weeks ago.

Warranty services are trouble. For one (1) simple washer part its taking over 2 months. They state its on back order...while my food is wasting away. Whirlpool didnt even know what he was doing, and to the top it off, forgot to put back the part he took off!

I had problems with the door closure on day 3 of my French Door Refrigerator Model # WRF560SEY. The flap on the left door that seals them fails to fold back if I open the right door first. Which didnt seem like a big deal until I tried to close them and have to remember to close the left door first or itll bang against the right door and Im afraid itll break that piece off then the refrigerator is worthless. The manufacturer drop shipped a new piece, after several attempts of adjusting the closure, and it still does not work. I have written Whirlpool and am told they have a new door on order but it will take 6-8 weeks, that was in March. Now when I contact Whirlpool no one ever returns my calls or emails. I have had the refrigerator only for 15 months and I have fought with either the store or Whirlpool since the third day of owning it. No one cares as long as the appliance is paid for. I will never buy another Whirlpool appliance.

I bought a whirlpool 40g gas heater with the Honeywell gas valve. In 5 years Ive had to replace the valve two times. Thankfully the valve was under warranty both times. Our old water heater was Twentynine years old before it started to leak, this new electrical diagnostic high tech gas valve keeps breaking showing a overheated error and the only way to fix it is a new valve that only Honeywell sells thats well over 100$. Talk about a scam!!

I purchased a new Whirlpool range and had it fitted for propane. I used the stove daily and within two weeks, the temperature started fluctuated constantly. Several things I tried to cook ended up burned. I called Whirlpool to ask them for a possible solution. They wanted to send a repair person. I live on an island and knew it would take forever to get someone here. My appliance person said it could be only two things - the temperature probe or the computer board. I purchased both things and had them shipped to my address at my expense. It cost $257.00 to get the items. My appliance man on the island installed the two new items. I was hoping that would fix the problem. I am sad to say it did not! The oven still fluctuates wildly. I set the temp for 350 degrees and it shoots up to 450 degrees. I turn the temp down to 325 and it settles in at 350 for a period of time. Then, without any warning, it will shoot back up to 500 degrees. I have to open the door and let the temp back down to 350. This is how I have to bake and cook with this disaster. Wish I never purchased a Whirlpool appliance!

I purchased the washer 1.5 years ago. At about 9 months, the latch was in need of replacing. The washer was locked and would not unlock. That was fixed. Fast forward to 1.5 years old and the control board needs replacing. The washer stopped in the midst of a cycle, filled with water. The repairs are over $400 -- nearly the price of a new washer. Ive never had a washer to go out on me. I willingly gave away my previous washer for the purchase of a newer model and did not expect this fiasco. I will recommend against purchasing a Whirlpool washer.

Whirlpool slide in range, microwave, dishwasher, KitchenAid fridge: All appliances, stainless finish, were bought with my home in October 2006. Range - Within the first year, I had problems with the outer plastic pieces breaking, the motherboard and the oven and broiler not working. The screws holding the knobs on fell out several times. The oven door was fixed several times this past year until finally it fell off and broke for good and now the oven does not work at all. Microwave - The rotisserie motor stopped working this past year. Dishwasher - Just after the first year, the outer shell of the door came apart. KitchenAid fridge - Within the first year, the temperature adjuster broke. The second year, the ice maker stopped working. This year, the ice maker broke again and the motor quit working twice already and all has been repaired. The freezer handle has fallen off as well.

This washer was expensive, platinum line. Clothes never smelled fresh and clean like they should. There is not enough water to cover and clean. After 4 years it started smelling dank and unpleasant even after cleaning cycle is run. Now I discover it has been leaking for quite a while. It will be 6 years old in July. The top wont stay up. This happened months ago. The part alone is 250.00 according to several sites. I just prop it up. Very displeased with this poorly constructed, expensive rip off!

I just bought a brand new Sterling steel refrigerator not even 2 months ago, and since I got it, noticed rusty spots coming out,and now has spread all over. I called customer care, and they said it wasnt cover under the guarantee,and to buy a special spray out of my pocket expensive to remove the rust. I am Very disappointed with the service I received, for its not even 2 months old refrigerator and it looks like it is old now. In addition, the company didnt offer to send someone to take a look, checking and make sure theres no future problems with my new purchase, and as a courtesy removing the rust free of charge.

After a days work Old Grumpy around 7:00 PM drags to sink, fills pan with hot water & soap; starts scrubbing forks, spoons & occasional cereal bowl. I prewash everything placing it in the dishwasher, it takes it a week to reach 3/4 full: use for sanitation.

I purchased a Whirlpool Cabrio washing machine in October of 2016. This has to be the worst purchase ever. I agree with most of all complaints I have read. I am using more water, electricity and time to get one load half clean. How can this be efficient? The only problem I dont have is the noise; very quiet as if it goes to sleep. Seems to me the company has misrepresented this machine in its claim of being high efficient, washing (cleaning) machine. I too say Do Not Buy this Machine!

We our adding our name to a list that is remarkably long. We purchased a top loading Cabrio washing machine just over a year ago and the problems with the balancing of the unit are the same as everyone else who has written in. The service company A&E has promised a lot but has done little to resolve the issues we have had with the machine. One representative told us that she would order the part and have it sent to our home. When the part did not arrive, we called A&E back only to find out it was never ordered because the service technician would not return their phone calls. I find this excuse ridiculous and similar to other false statements they have given us on the other four phone calls made to address the problem. After reading these reviews, we realize that this is only the beginning of what will be a frustrating and costly experience. Never again will we buy a Whirlpool!

Whirlpool gas range model WDF560SAFT bisque color, purchased in June 2020 from Home Depot online. After a 3.5 month wait range was delivered September 12, 2020 and installed. Have used the oven less than 5 times. Standing in my kitchen yesterday and heard a pinging noise, noticed chips of the finish all over my floor, it was chipping inside the top of the oven door, overnight the exterior top of the door was also chipping, bits of finish flying all over my kitchen! Have been on hold with Home a depot Cust. Serv. for almost 60 min. Will attempt to return to a Home Depot. Not sure what to do short of complaining about lousy Whirlpool product. Next time will come to Consumer Affairs and research.

Whirlpool Energy Saver Dishwasher Model DU850SWPS3 was placed in our new home purchased in May of 2010. We just found that this dishwasher had a slow leak in the seal to the motor which has ruined our hardwood floor, subflooring and part of a laminate beam on the floor directly below the washer, plus molding from the water. The leak has been going on sometime it was not noticed until the floor became so soaked from use over a long period of time that we finally saw the leak, by accident, in the basement which we hardly access. The Whirlpool costumer service was no help and would not entertain repairing the dishwasher unless we paid due to the fact it is over the year warranty. This is clearly a defective part in their product and poor workmanship on their part. We should not have to check underneath our new appliances to determine if we have leaking problems because we cannot trust them from failing. I will never purchase another Whirlpool product and will not recommend their products to anyone.

I purchased this Maytag clothes washer in 2007. So far Ive had to purchase and replace the front door 2 times. The current one now needs replacing. The plastic near the hinges disintegrates after about 2 years. This appears to be a manufacturing design defect. I have requested from Whirlpool to send me a replacement door for my washer. The part number is 34001178. The model number is MAH2400AWW. The Serial number is 14060452LE.I have spoke to four different levels of employees at Whirlpool after escalating the service request. Each time they have told me they are unable to send a replacement door to me, stating that the product is out of warranty. I realize that the washer is out of warranty but I believe this problem is a design flaw. The plastic near the top door hinge breaks down and cracks after 2 years of normal use. The last person I spoke with Michael (would not provide me with a last name) said to write to the Whirlpool corporate office with my complaint.

I purchased new appliances almost 1year ago to the date. I bought the glass top range with. convection oven. In convection mode, the fan cuts on and off intermittently during bake cycle. Friends who also have the same oven say their fan runs consistently in convection mode. Repairman came out and changed fan and control panel. Still runs intermittently. Apparently that is a feature of “some models”. Had I known it was not continuous convection, I would have purchased a less expensive model without convection feature. It takes longer to cook in that mode.

I purchased this dishwasher washer (Model WDT710Paym3) in May 2013, quit cleaning. I have checked filter. I run this washer 1 or 2 times a week. Very disappointed in washer and the quality of the product. Dont think my next purchase will be a Whirlpool.

We bought a Whirlpool side by side at the end of August 2017. In March of 2018 - the day after I got the letter about extending my warranty - they had to replace the diffuser - it was making a horrid noise and freezing my eggs and milk. This part went again in July. I insisted they extend my warranty which they did - until March 2019. The part went again in November. I again demanded an extension - now it is guaranteed until June 2019. I asked about replacement and was told that as long as it was reparable they would not replace it. This part is dying every four months. The first few times I called, the hold recording touted a repair app - that did not give me much confidence in the company.

The Whirlpool Cabrio washer was extremely expensive to purchase but is rusting out and the circuit board is going out. We have had cheap washers last longer than this one and just to purchase the circuit board will be more expensive than another cheap washer. These boards go out right after the warranty goes out and I think that they are timed to go out. (The exact same thing happened with our dishwasher and after the board was replaced, it has lasted many years). Whirlpool should replace these for free since they do not last that long and are very expensive.

Bought new dishwasher on 11/29/2013. Model #WDT710PAYM. The top rack cannot hold much weight. It keeps collapsing. One side keeps falling out of the track. Had man in for repair, still doing it. They sent me a new rack and rollers, still doing it. Having repair man come back again in a few days. I am so disappointed with Whirlpool. I cant believe they went so cheap in building these machines. I gave away a whirlpool gold that was 20 yrs old and it is still going strong with no problems. I just wanted to update up kitchen with stainless steel appliances. I will never buy whirlpool again!! This cannot be fixed. It just doesnt fit tight. Im stuck with a bad dishwasher and shouldnt be.

Electrolux dishwasher model EI24ID50QS - My husband picked this dishwasher after reading all the good reviews. However, after having issues with it, I tried to post my review and it would not post. I think Electrolux is somehow only posting good reviews and leaving out the bad. I had a technician come out to see why it took 6 hours to go through the cycle along with not cleaning the dishes well. He said I needed to run hot water before starting the cycle and that I needed to prewash my dishes before loading.In other words, its not a dishwasher but a sanitizer. Keep in mind that I rinse my dishes before loading, so I dont have food particles stuck dry on my dishes. So, I used his method of running hot water before cycle is started. It works ok when you dont use your kitchen faucet during the dishwashing cycle. However, the minute you use your faucet, the dishwasher runs for 6 hours! This is the worst dishwasher ever! Not to mention, the control panel is so sensitive that if you accidentally touch a cycle to start, you cant get it to cancel. It is ridiculous. Dont buy! It will be your biggest mistake.

I bought a Whirlpool top load washer. In less than a month it had to be serviced by their recommended service repair. It has never worked properly. It malfunctions almost everytime it is used and takes at least an hour to wash even a small load. At first I thought I may have acquired an odd lemon. After talking with several friends who had bought the same Whirlpool model I found we all had the same complaints. My old machine could wash a king size comforter in 36 minutes... that was energy efficient.

I would give no stars for this piece of junk, Whirlpools energy efficient top load washer. I called 1 day after their warranty was up. It was actually purchased on Oct. 9th, 2010. The machine was leaving spots on my clothes from day one (was told it was my detergent)! The machine started making strange noises and not cleaning clothes. It was coming out worse than they went in the machine! I called on Oct. 10th, 2011 to complain. They told me my warranty was up! I had to pay $234.83 to order F7E1 activator and pay repair. The repairman told me that my machine was not delivered until Oct. 14th, 2010. It should have been covered on warranty!

After 14 years of good service with Whirlpool Duet front load washer dryer set, wife chose Whirlpool kitchen appliances as part of a kitchen update project. All matching fridge, range, microwave hood and dishwasher. What a nightmare! The icemaker growls and whines all the time and the dishwasher was broken before being packaged at the manufacturer. A wheel from the middle rack was missing when the dishwasher was opened. It wasnt in the sealed dishwasher nor in the box. So it had to have been broken off before the item was boxed. We called for warranty claim and A-1 Appliance was recommended out of Shreveport, LA. In a few weeks he showed up, looked at the rack for a while and said Ill have to order a new part. I said fine. (How hard can that be? Right?) So here we are 5 months later, unable to use the middle rack because it cant hold any weight with the roller missing. Multiple calls to Whirlpool and A1 and we keep getting promises and runarounds that turn out to be lies. How hard is it to say go to your local Lowes and well authorize them to give to give you a rack from an in-stock dishwasher? Let Lowes wait on the new part! Sounds simple, and any other company would have done that, or told us to return it to Lowes for another one. But NO! Whirlpool just whines about being behind on parts, shorthanded, or lies about the part is in and its A1s problem now.So, today, same story. A1 says they need 2 parts. **! Its one part. Whirlpool says A1 has the needed part. Same old runaround. So, we just replaced our 14 year old washer and dryer with NON Whirlpool units. $2500 more in of appliances that Whirlpool could have gotten, but Im guessing they dont even care about missing and losing sells. They certainly do not care about warranty, parts, quality, customer satisfaction or repeat customers. Never again with Whirlpool! Beware!

I bought a compact washing machine and 4 months later it broke, needed a CCU board. To make a long story short now the machine is 7 months old and still broke. Whirlpool cant locate a part for it nor do they want to replace it. I think its time to get a Lawyer involved. Ive been calling for weeks now and have gotten nothing but the run around from all very Rude employees. Im turning this over to a lawyer. Im done dealing with Whirlpool. For a large corp Im very aggravated and severely disappointed with them. Wish I never bought their appliances. NEVER AGAIN.

I am so disappointed in my whirlpool W10431035A gold series dishwasher. I bought this 2 yrs and 2 months ago on black Friday at a lowes. I wanted to have a whirlpool and I thought they were a good brand. It has been a little over 2 years and my dishwasher no longer works. The start button no longer works. It is not even that old and appliances should at least last 4 years. I could understand if the plastic utensil holder or dishwasher rack breaks...fine, you use plastic. But this is an intricate part of the dishwasher....the start button and it does not work. I am so disappointed in whirlpool. It is the start button...how can this break. The only thing I do is press normal cycle and the start button...that is it. How can this machine break so easily. How can whirlpool build and sell such a faulty product. So disappointed.

My Whirlpool washing machine is really easy to use. It is a mid-range machine but it has all the bells and whistles. Its a joy to use. It gets my clothes nice and clean. It does a great job. I would definitely buy another Whirlpool washing machine.

The shelves in the newer units are plastic not glass with metal and they rip/break holding heavy contains like gallons of milk, and they are more expensive to replace. I just wish they would go back to building things like in the old days. My last refrigerator lasted 20 years. Ive had this one a year paid twice the price and already had to replace shelves and trays for it..

Its a 25 side by side and though its a large refrigerator it seems small inside. That being said I would probably not buy a side by side again. I have always bought Whirlpool made appliances and have been always satisfied. I do not like refrigerators with the freezers on top.

The built-in microwave above the stove was in the home when we bought it seven years ago, so not sure how old it is. Although it had a crack in the door, near the handle, weve had not one problem with the unit. The crack has not opened more, or gotten longer, in the seven years weve been in the home. The unit is easy to clean, and has worked perfectly. It is simple to use, although no directions came with it, it was easy to figure it out.

My whirlpool duet was extremely quiet the first few times I used it and seemed to work well. Then I noticed that it randomly drained the clothes but didnt spin them, it did it on different cycles, and I would have to run the load again on spin and drain, another 19 minutes of run time. After a week it began to make metal scrapping sounds on the spin cycle and vibrated to the point that it moved the pictures on my walls. I called Whirlpool customer service and they authorized a service call. In short, the service man was very confrontational told me there was nothing wrong and charged me $72. It still vibrates and randomly doesnt spin. But now after he took it apart it sounds like a jet engine when it does spin. Whirlpoolss response after repeated calls? Not a new machine, but another service call......

We bought the Whirlpool Cabrio set from Sears in February 2010, for our second home. We counted up the weeks we have actually been here since then, it is about 10 weeks. We figure we used the washer about three times per week. So, we have gotten about 30 wash loads from this washer and it dies mid-cycle. We assume the motherboard crashed. It kicked the breaker. Lid was locked and we couldnt get it open. The washer would not power up. Repairman arrived three days later, got the latch opened but couldnt figure out what was wrong with it. He said it is probably a board and it might be better for us to replace. He wants to pick it up tomorrow to take to his shop. I called Whirlpool to complain. I know the one year warranty is up but to get 30 uses out of this expensive piece of junk and not get any consideration from the manufacturer is not right. I wish I had seen all these complaints before I bought it. No Whirlpool ever!

I purchased Whirlpool Microwave/Convection Oven a little over a year ago. It needed repair four times and the latest repair debacle appears that it will take ~5-6 weeks to get it repaired if the part that comes in works. The microwave model number is GMH6185XVS1. I will never buy another Whirlpool appliance. I spoke with Whirlpool (not the extended warranty company to which I was referred), and they refused to help, period.The extended warranty company (although very nice), werent much help and will continue to attempt repairs until the price of the repair(s) exceeds the value of the microwave no matter how it inconveniences my household.

We purchased the Whirlpool Duet (front loader) washer and dryer in 2005 from Best Buy. We had many problems with the washer leaking around the front door. After several visits, Best Buy (in 2007) said we could pick out a new washer. We picked out the Whirlpool Cabrio. About 2 years later the mother board had to be replaced on the Cabrio. We are constantly getting F codes and have to unplug the washer several times for it to reset. It also sounds like a plane getting ready to take off and from what I read that repair is very costly. It has been leaking as well. I contacted Whirlpool today and they informed me that there was no recall on the machine and when I told them that there were many complaints for the same issues online, they said they do not base their recalls on blogs and to fix the problem, I would have to incur the cost. This machine is the biggest piece of junk that I have ever owned. I will be sure not purchase a Whirlpool in the future!

First whirlpool 3 door with ice maker in door failed in less than a year. Took 6 months to resolve issue, several service calls, at least 30 calls to Lowes and Whirlpool with little or no response. Nobody wanted to take responsibility to do something about my broken fridge. Even the authorized repair guy didnt want to touch it, didnt want to ruin his reputation because they wont stay fixed. Another service guy wanted to take it to the shop to repair, of course I would be responsible for pickup and delivery charge. Found out the repair was an in home repair, so didnt use that guy, I felt like he was trying to rip me off.I finally got to the right people in whirlpool organization and they replaced the fridge, that took another two weeks. I found everything takes two weeks. The replacement was supposed to be same model with upgrade, this is gold series fridge Ive been talking about. New fridge has failed also, seems like same symptoms. It lasted 1 yr and 4 or 5 months. I guess not too bad for a top of the line refrigerator, made by Whirlpool. Gonna give them a chance to make it right or I am considering hauling it around in my truck with a sign on it. Not trying to punish the distributor, just Whirlpool. This product is so bad the government should step in and force Whirlpool to give money back.

High end Whirlpool dual front loader washing machine model number WFW94HEXW2 died after 5+ years of less than moderate use. Used no more than once a week. Paid for a top end model. Had 2 mechanics look at it. Mechanically it is fine. The CCU is not working correctly and wont allow it to start. We replaced it, but to no avail. It is barely out of warranty at 5+ years old. Called Whirlpool and they said they would do nothing. Asked for a manager and she was rude to add insult to injury. Cant get to the serial number because the door is locked shut as part of the shutdown problem. Cant find original receipt so including a picture of the credit card purchase. Trying to contact retailer but so far have not heard back from them.

In November 2014, I purchased a Whirlpool 22 cu ft side by side refrigerator from my local appliance store. During that short time, there have been 4 instances where the ice clumps together and gets stuck, causing a large amount of ice to dump inside the freezer door. When the door is opened, the ice falls out onto the floor. I usually spend 10 minutes picking up ice and wiping up my kitchen floor. I have had the local store repairman over. He told me that was normal. Two things are seriously wrong with that statement. When I spend 1600.00 for a brand new appliance, I should be able to depend on the fact that it will function in at least a somewhat acceptable manner. Additionally, that statement by the repairman convinced me that he was not really interested in fixing the problem. I really dont think the normal operation of a new appliance is for it to make frequent, large messes for the owner to clean up. This appliance is junk and you would be foolish to purchase it. Spend a bit more money and buy a Samsung or LG. Save yourself the frustration and sense that you have been cheated and deceived by Whirlpool. I will never buy this brand again.

Purchased heavy duty dual steam washer and dryer in 2008. Recently got some error codes that we could not fix. Had one service company come in and they could not figure it out. Had a certified Whirlpool company come in and they could not figure it out. They called Whirlpool technicians and they were even unsure of what is wrong. Said they could keep ordering parts and trying them to fix the problem. And of course I would be responsible for the parts. And no guarantee it would be solve the problem. Called Whirlpool direct, to no satisfaction. They said they could send the same company out and have them call the tech line while on site and try to troubleshoot the problem. However, would have to wait another 3 days to get him out. Been a week without washer. I have had washers bought previously last over 10 years without any problems. If these machines are breaking or control boards are going out after about 4 years, then Whirlpool has a bigger problem. Whirlpool supervisor was only offering to maybe a discount on the parts needed, without even knowing if they could fix the problem. Seems to me like they really dont care. Very dissatisfied, will definitely not recommend this product to anyone. And if it ever gets fixed, I am going to sell them immediately.

Purchased the 2015 Whirlpool Cabrio. Today 5-2018, the panel went completely out. When I called the store (Lowes) they asked if I purchased the warranty. I responded no, she went on to say, “Well since you choose not to purchase the warranty youre stuck”. Even if I paid for the warranty a washer should not break down in less than 3 years. My previous washer lasted 18 years with no problems. We purchased this washer because of the larger load. It was one of the most expensive washers. It’s a piece of junk and the manufacturer will not stand by their horrible product. Please DO NOT buy! I will be filing a formal complaint.

My experience was terrible. We purchased a side by side refrigerator on June 27, 2011 and it stopped working in December, 2011. We reported this onDecember 19, 2011. A repairman was sent out a few days later, who could not solve the problem because a piece had to be ordered. The piece was ordered and the repairman came to install the part on December 28, 2011.The refrigerator is still not working at all. We have been without ice for this period of time, not to mention the inconvenience of non-refrigeration of food. I pleaded for them to pick up the refrigerator and give me even a partial refund. I was told that three repairs had to be done before they would even consider picking up the refrigerator. I am not a person who complains, but this was ridiculous. I will never purchase another Whirlpool product.

Whirlpool Gold Convection Oven - I bought this new oven, cleaned it once. The bottom cracked where the spills had been. Since Id had it only two months, repair tried to say it was only cosmetic but had to replace it. Next time I cleaned the oven for multiple spills, (a year later) it cracked again, giving the bottom a shattered look where the spills were. I only cleaned it once and the bottom is ruined. I dont expect Whirlpool to stand behind this, but I agree these Convection Ovens require a Class Action Suit because they are selling faulty merchandise. Period.

I was so excited when I bought this stove. It broke right outside the warranty. It shuts off in the middle of baking or just doesnt stay on at all. Bad, bad, bad. They told me it would cost $400 just for the part, not including installation. What a rip off. I called the tech and he said this is a known problem. He advised me to just toss it and buy Hotpoint which has a much better consumer report rating. Sad.

I bought a Whirlpool water heater from Lowes. I had trouble with it from day 1. It never worked correctly. Their service department is terrible. All they want to do is sell you extended coverage policies on it. Every time I have it fixed, its never covered, and I have to pay again. You will be sorry if you buy a Whirlpool water heater.

I purchased an HIE washer one year ago this month. I have never been happy with the cleanliness of the clothes when they came out of the wash. The only way to get them moderately clean is to wash a few items at a time and even then the whites, especially socks, seem dingy. I noticed the new Whirlpool washers now have an extra setting to add more water to the machine, so the executives have realized there is a problem with the original model.I think Whirlpool should give all customers who previously purchased the models without this feature a trade-in option to get the newer model that fills with more water or for another model with the full spindle that has worked well for so many years. I have been very unhappy with the performance of this washer and would only hope the executives would do something to resolve this problem and satisfy previous customers.

I can add my experience with the many others I have read about. My Whirlpool Cabrio washer top lid glass broke in the up right corner after only 2 months use. Like many other reports, this is not due to something falling onto the lid. It happens without warning and without operator interaction. This is a defective design!

I have to agree with a previous responder. I have a 6 yr. old Cabrio washer. Everything else works fine except the motor control board. Paid $72 for an estimate and they tell me $350 for parts & labor to fix it. $350 to fix a $439 (new at Lowes) washer? Do we now have disposable large appliances? You can do better Whirlpool. This has been a good washer. You shouldnt be pushing me to buy a new one so quickly.

This is not a new washer (Whirlpool Cabrio INTW6200VWO) and it works well BUT since we have owned it we have had rust at the bleach dispenser. I am seeing on the internet there are many complaints about this and there was a recall? But they have run out of replacement parts??? Never received any recall notice. We have online instructions on how to repair and have done this many times and the rust comes back. About a week ago we sanded, primed and enamel painted the area plus I have put NO BLEACH in the dispenser and the rust is coming back. I hate to replace a working machine but this rust can and will get on my clothing. Whirlpool was the absolutely best in the past but this one is a lemon.

Just bought what I thought was going to be a great dishwasher. It had all the features I wanted. But, I discovered that none of my silverware would fit in the slots provided in the silverware basket. It is a disaster. The slots are so tiny that most of them are unusable. I called Whirlpool thinking that surely there was another basket I could substitute, but no, there isnt. Everyone was very polite, but the end result is that the Ill be handwashing most of our silverware. Unless your silverware has very narrow handles, forget this machine. Obviously designed by someone who has never loaded a dishwasher!

I bought a Whirlpool refrigerator January 2016. 4 months later the refrigerator stopped working. It took over a week for Whirlpool to have it repaired. Two weeks later the refrigerator stopped working again. It took four days for Whirlpool to get a repair man to my house. I called customer service 4x asking for a replacement or loaner or possibly they could expedite the repairs. All they could do was recite my warranty to me stating that they are only responsible for repairs. I was in touch with their executive office and was pretty much told tough patooties - my warranty only covers repair. The executive office told me to wait for a third breakdown and then we could talk about an exchange. WHAT??? I have to suffer a third inconvenience before Whirlpool will do anything??? I lost hundreds of dollars in food, have to live two weeks without refrigeration in 95 degree Florida weather, had to go shopping on a daily basis or eat fast food (at my expense) because I couldnt even keep milk for breakfast cereal. I filed a claim with BBB only to have Whirlpool close the claim stating that they fixed the refrigerator.

The dishwasher racks in Whirlpool/Amana/Kitchen Aid/Maytag dishwashers do not last as long as the dishwasher does. The vinyl coating on the cheap metal tines wears off causing the metal underneath to corrode and rust. This rust will deposit on your flatware, stainless or otherwise. When the vinyl coating wears away at the base of the tines, the tines will break off, creating more opportunity for rust to deposit onto flatware. You can purchase new tips for the end of the tines, and more vinyl to paint onto the tines, but you cannot replace the tines themselves or paint the vinyl onto any rusty surfaces.Another option would be to buy a new rack. A new bottom rack costs almost half of what a new dishwasher costs and if you need both top and bottom racks, you will pay almost $400 for the pair. Whirlpool was not amenable to negotiating a better price on the racks, but they would sell me a new model at a price that was close to what it would cost to replace both racks! Now does that make sense? Does it make sense for appliance companies to cause consumers to have to throw out an entire appliance rather than fix it? No, and it is creating more waste and filling more landfills. My dishwasher has run great for 7 years and I refuse to buy into the rack racket! No more Whirlpool for me!

Whirlpool Cabrio WTW8500DW0. Like: Top loading, Handsome appearance, clear glass lid, easy access soap dispenser plus separate Oxi dispenser. Dislike: Does not have a soak cycle. We didnt realize until after we replaced our old Sears Calypso what a really poor job it was doing. It damaged the clothes and never really got them clean. Also, the small capacity made it nearly impossible to wash large items such as bedspreads or comforters. The Whirlpool Cabrio WTW8500 has be a delight.

Purchased a Jenn-Air single wall oven model JJW2427WS after seeing it displayed in an appliance store. Oven was installed as directed. Upon viewing the panel, I discovered that it does not light up. You cannot read the function or numbers, never mind start and cancel without a flashlight. I have been a Jenn-Air customer for over 20 years. This is the first time I have been disappointed. Also, has this model been discontinued or recalled?I wrote to the CEO of Whirlpool and explained my problem. I was told that this is not a functional problem, but perhaps a design dissatisfaction. I cannot believe that there are other consumers who are not having difficulty using their appliance without additional lighting in their kitchens.

We purchased a Whirlpool Cabrio washer 6 years ago. This washer has been such a terrible appliance, I would not recommend that anyone buy one. The top of the washer has broken 2 times. Whirlpool will do nothing about it. It is a manufacturers defect where the glass pops out of the top and then breaks the frame it is in. We had it replaced last year and the new one is now broken - same problem. It also does not get clothes clean and the clothes get ruined because they become all entangled in one another. We will never purchase a Whirlpool appliance again. I did have a 5 year service contract on these appliances but once out of warranty - you are on your own.

I am completely dissatisfied with the Whirlpool Cabrio top loading machine. Our washing machine is less than one-year-old. It doesnt get the clothes clean, especially the darks, and it is so rough on the clothes that they come out twisted tied into knots. The dark clothes come out dirtier than they went into machine. Even though we use the dark detergent on the dark clothes and program for an extra rinse cycle, the clothes come out with white powder all over them. They need to be washed again and sometimes again. And sometimes they still dont come out clean. That is not very energy efficient. The clothes come out of the machine so wrinkled that everything needs to be ironed. I can imagine making washing machine that doesnt do its primary function, which is to get clothes clean. Todays families do not have time for this extra work.

We were at end of cooking salmon in CorningWare and the door blew open with amazing force!!! It is a double oven... Sounds like Whirlpool doesnt care so trust me we are not buying one ever again. :(

I bought an whirlpool stove from conn store in 2007. The oven hasnt work right since day one. They send different people out to service it - still dont work the right. We smell gas when we try to light it. It wont come on 90 percent of the time, sometime we have wait a while to start it. They refuse to exchange from day one, we cant afford to throw our money away so we do more top cooking than bottom.

I bought a Whirlpool Gold Series Microwave, model # WMH76718AW, on 2/19/13. It stopped working 1/25/15. It doesnt heat food anymore. I also have a whirlpool dishwasher that doesnt clean dishes. Whirlpool products are junk. Whirlpool customer service is awful. The cost of fixing this lemon and then buying an extended warranty for the repair (which they recommend) will make this a $1000 piece of garbage. They dont stand behind their defective products. Ill never buy another one again.

Originally installed early 2007, the very expensive unit went crazy after about 14 months, with random beeping noises, and non-response to keyboard entry. Sometimes unplugging the unit worked. When unplugging no longer worked, the unit was repaired by replacing the keyboard logic boards only to fail again the same way.about a year later. It appeared the heat or steam from the cooktop below the microwave was causing the failures, so we became careful to ensure the fan was on. Last week, after boiling some water, the unit failed again, with error code F2H2, the keyboard error. Didnt Whirlpool expect the microwave to survive heat or steam from the stove/cooktop below? Overall, the unit is great when it works. Unfortunately due to the large size of the 2 cu ft unit, only an identical unit will fit. Im skeptical of replacing my broken unit with another Whirlpool Velos unless this keyboard problem has been fixed in new units. Anybody know if Whirlpool has fixed this problem?

I purchased Whirlpool dishwasher, model DU930PWSTO, in 9/2007. It quit working in 5/2012. I expected an appliance made by a reputable manufacturer (Whirlpool) to last longer than five years. It seems like a manufacturing racket where they build these things only to be replaced a short time later. With service calls and parts replacement, its cheaper to buy a new unit. Talk about a circle jerk! And who the heck puts anything else but SS screws in a water soaked appliance? Duh. Rust! Im disgusted and dissatisfied with the whole company. Im still waiting on their response to my complaint email; at the time, the machine quit working. Whatever happened to pride in American made products? Or, did this get company bail and were now slaves to the Chinese junk once again? Ill never buy another Whirlpool appliance again. Does anyone have anything good to say about this company? I wish I would have read this blog before purchase.

Two years ago, we purchased a Whirlpool Cabrio Washing Machine from Sears. All of a sudden, it was making sounds in the spin cycle that sounded like a jet airplane taking off. It was terribly loud. We called repair technician, which cost $90, only to find out that the bearing is gone and its going to cost over $500 to fix it. This is absolutely ridiculous! We expected it to last several years, only to find out that we would have to spend almost as much as the washer originally cost in order to fix it. We paid $700 for this machine, two years ago, and I can say that Ive never been more disappointed with a product in my life. My previous washer lasted thirteen years, not to mention my dryer and stove fifteen years, with minimal repairs. I will never buy another Whirlpool appliance again. I have read some other complaints on this consumer affairs website, as well as other sites, regarding this same washer with the same problem on the bearing and cost to repair. If anything, I think Whirlpool should make good on this product and offer something regarding a recall or payment for repair in some form. As far as Im concerned, I will alert everyone I know about Whirlpool appliances and advise them not to purchase it. Now, I either have to pay over $500 to repair my washer or go buy another one. I do not even want this Whirlpool appliance in my house when I can get a washer for cheaper than the cost to repair it.

The Cabrio is the absolute worst washer that Ive ever owned! No matter what combination of setting I use, my clothes come out dingy, all twisted and wrinkled, and full of lint and detergent residue (I use liquid detergent made specifically for HE washers). Every setting runs for over an hour. So much for high efficiency! What it saves on water it more than wastes on electricity!! More often than not, the entire load becomes enveloped in one of the items to create one huge ball. A t-shirt stretched to encompass the remaining clothes into a perfect sphere! When that happens, some of the laundry in the middle of the big ball is barely damp. The dryer is just as bad, even the towels come out wrinkled. How is that possible? And again, it takes over an hour to dry a load.Whirlpool customer service is awful. When I called to complain, the agent began schooling me on how to wash clothes. Im 66 years old, Ive washed a few clothes in my lifetime and have always prided myself in my white whites and bright colors. I have a new house and the builder provided all the appliances. Based on my past negative experience with Whirlpool products and their customer service, I would not have purchased Whirlpool.

Absolute junk. Bought an entire matching set 2 years ago. Fridge, microwave, dishwasher and oven. Oven is the most user unfriendly thing I have ever bought. That’s my fault. Microwave failed. 300 to replace. Ice maker in side by side fridge failed, another 300 dollar fix. I used to have a field mouse or two get into the house every year. Don’t have that problem anymore because the fridge is so loud it scares them off. Talking to Customer service was the most frustrating thing of all. They think if they say your name in a nice soft tone long enough it will make everything ok. Mother and father raved about Whirlpool products. How times have changed. Do yourself a favor and steer clear of these products. Also, look up the other brand names made in the same factory and steer clear of those as well. I used to think appliances were all the same. How wrong I was. Do your research. It will save you a bundle in the long run.

1st range arrived in June and would not heat to temperature. Sensor and control panel replaced. After 3 techs Whirlpool agreed to replace in September. 6 weeks later new range arrives. Protective film stuck to the lettering and when you try to remove it the lettering comes off. Chunk of enamel missing off inside oven door and defect in the glass cook top. Fast forward to today. THIRD range delivered. Same issue with the protective film and gouge in chalking around cooktop. Leons has been fantastic. They are replacing it with an entire new brand!

I was going to write a negative review after our Whirlpool stove oven stopped working. We only had it for three years. Technician’s visit today was $70 for the information that we would be better off buying a new one because the motherboard is gone. However, after reading all the horror stories which are already here, I realize that we are relatively lucky - at least, our stove worked for 3 years... Still very disappointed and unhappy. No more Whirlpool products!

Horrible. We purchased the set In October 2010. It worked great for a little over a year. (Go figure, just out of the manufacturers warranty.) The washer stopped spinning out water. Every other cycle completes successfully. The diagnostic cycle is also successful but once there is clothes in the machine, it wont spin. I called customer service and was told that a one year warranty was $230 and service is $130 plus parts. After reading another horror story, it seems that this venture is going to cost us around $450 for a new circuit board. Where is that class action suit at again?

I had noticed water on the floor and just thought someone left the freezer open. It started happening about every other day. I read online that it was probably from the drain in the bottom on the freezer being clogged or frozen, and I found instructions on how to fix it. After we took the door off, the drawers out, and the back panel off, then we started thawing the drain. Finally, I got it cleared out. Here I am, a month later, there’s water on the floor again.

Bought my 5 door refrigerator from Lowes in December 2016. Was delivered in January. Had a dent in the door so another new one was ordered that arrived in late January. From day one the dual ice makers have not made enough ice for our family. I called Lowes to have it checked out thru warranty. The repairman came out and said Its making ice. I cant fix something that is not broke. He suggest I buy a under the counter ice maker. What the heck! I pay over $3000.00 For dual ice makers and still dont have enough ice to supply my family. Cant believe Whirlpool puts out a dual ice maker in a refrigerator and it cant even supply a family of 5. The repairman said a normal family size is 3. I dont know where he came from but to me thats not normal. He was from Tutor Appliance Repair and was very rude until he realized he pissed me off then he blamed it on Whirlpool. The refrigerator is beautiful but Id rather have my old one. It made more ice than this new one does. Will I buy whirlpool again? No I wouldnt. If they cant stand behind their product and what its suppose to do then I dont need it. Bad thing I have to deal with this one for a while until I can purchase a new and better one. If you have this refrigerator dont plan on having guest or family dinners it will not hold up for ice tea. Not to mention after dinner drinks. Model # WRV986FDEM01. SeriAL # K63817128.

Ran Aqualift self cleaning cycle 4 times at 40 minutes and only bottom was cleaned, sides are still spotted and the rear wall still shows a heavy spotting. My stove is less than a year old. My prior stove with self clean at a higher heat was great, when done only had to wipe out!

Pathetic pathetic service!!! Unsatisfactory service!!! First of all, I would like to tell everyone who ever reads this, that please please please never ever use any Whirlpool products, as their service sucks, their response sucks too, and zero co-operation from their people, which will make you regret to have used their products in future. Please note I registered a complaint on the whirlpool no. **.The complaint was that the washing machine used by us had issues, the power button/ on & off button had come out, and this was clearly stated while registering the complaint. I get a call from Mr. ** (Representative of shree enterprises bibwewadi, pune) and the power button issue was well informed to him as well over the phone by me. He arrived to our place without any new material, he sees the machine and interchanges the buttons, i.e. the broken power button is replaced by other button from my machine which was less used compared to the power button. I had to pay a sum of rs. 400/- for the pathetic service I received from your end.I expect a response from your side within next 4 hours, or I might have to escalate this issue!!! (Please note Whirlpool team that I had submitted the same on your website yesterday, yet I have not received any response from your side). (Whirlpool rating- 0 out of 100). Thanks. (And whoever reads this, please tell me where else can I post this review of mine so that I shall alert everyone that how bad whirlpool service is)...

We bought a Whirlpool with convection oven, it is beautiful and very well designed and fully electronic. You can only control it via touchscreen Which, when the software runs into blocks, it is impossible to troubleshoot efficiently, you just have to wait until it completes its rebooting. It is very frustrating to spend hundreds of euros in a device you just cant control when it crashes. Horrible programming made for a horrible user experience. You have the feeling of not being able to use it or fix, it is like having a mobile phone or computer Which only works on what appears to be a random logic. The errors displayed on the screen are often vague and the user troubleshooting manual is just plain short. We will return it without doubt and dont recommended ever buying this device.

Like hundreds of others, my Whirlpool double wall ovens circuit board stopped working after 5-7 years. Accubake s-xt3704215 m-rbd275prb00 Whirlpool double oven. If it is happening to all these people, the protectors of the US consumer need to do just that!

It seems the quality issue of the LED of the washer Whirlpool Cabrio. It was broken from the screw part of the glass and the plastic/alloy and the glass. They would charge me $416 to replace the LED but I rejected and was still required to pay $85 for labor fee. I called the company and they didnt admit that was a quality issue but I just found many consumers had the same problem. If someone would like to have a lawsuit, please contact me and I will join.

When I purchased my Whirlpool Cabrio washer and dry, I was told by the sales associate that this was the top of the line. I paid a higher price for what I thought was quality only to find out that this washing machine (WTW6600SW2) Serial number CU2973872 is in fact poor quality, made of components that are cheap, unreliable and made to last only as long as the initial warranty. Prior to buying Whirlpool, I owned Kenmore and had a washer and dry that raised four kids, now I own a Top of the line Cabrio that cant wash the clothes of two adults. I think it is funny that two days after the washer started sounding like a jet plane taking off during the spin cycle, I received your sign up for an extended warranty letter. Then I take the washer apart to locate the trouble and find it is a single bearing on the top of the drive shaft, but can I buy the bearing and replace it? No, I have to buy the entire outer tub and drive shaft. So a $10.00 bearing will now cost me $200.00. I am sure that helps your profit margins considering all you have to do is a search for Cabrio problems to find 350,000 hits, or to ask a professional technician and receive the reply that they are replacing 2-3 of these tub and drive shafts per week. I would recommend that Whirlpool tell its shareholders that you have compromised customer satisfaction to line their pockets with profits. If that was your intent then you have succeeded, however you need to also tell them to sell their shares now as you will have no return customers. Most corporations have core values that deal with safety first and then always followed by quality. I can say with confidence that your quality can be nowhere near the top five with this many problems with your top of the line product.

The washer (Cabrio WTW7800XWO) was less than 2 years old and we had a motor go out, so we paid a repairman to come out and repair the machine. The total cost was over $300. Now 2 months later, we get another code on the machine and Whirlpool says, We are sorry but there is nothing we can do, but if you would like to pay $219, we can get a repairman out there to check out the machine and repair it. Theyre also giving the machine an additional year warranty. Shortly after that, I noticed the lid was not staying up when I opened to put clothes in it to wash. So since I was wondering what was happening, I looked at the lid and to my surprise, the springs that hold the door up when open are built into the plastic lid cover that has a see-through glass on it. Right where the springs are located, it must be a stress point and the plastic lid has since cracked and is almost about to break off. I am now in the process of ordering another lid and Whirlpool offered to sell me a lid for $226 but I think I shall buy it from someone else as I dont want to put any more money into Whirlpools pockets. We paid over $1000 when we bought this machine. Now it is about 2.5 years old. I hope there is a class action lawsuit on Whirlpool as I will definitely join in if there is. This company needs to go out of business if they continue to sell machines like this that have so many problems especially when they are less than 2.5 years old. Goodbye Whirlpool. You have lost many more customers as I shall be letting everyone I know about all the problems and complaints about this machine.

This Whirlpool refrigerator/freezer Model W10314956B was purchased from Lowes on June 29, 2012. Recently noticed rust appearing under ice/water dispenser tray. Requested warranty service, but was told the problem was considered DUE TO WEAR & TEAR! TOTAL COP-OUT! There are NO MOVING PARTS in this area; how can there be WEAR and TEAR? To my mind, this can only be charged as SHODDY MANUFACTURING or INADEQUATE QUALITY CONTROL by the manufacturer.This appliance is only 6 1/2 years old! Consumers expect refrigerators to last much longer than that. The only possible cause for this problem is as stated above: poor quality control by the manufacturing plant, and I completely discount being told the problem was due to WEAR and TEAR! I will think long and hard before I ever even CONSIDER purchasing another Whirlpool product, and maybe YOU SHOULD TOO!One issue that keeps gnawing at me is HOW, since this is supposed to be a STAINLESS STEEL refrigerator, can it rust? The best answer I found on Google was that its likely due to insufficient chromium in the mixture of metals used to make stainless steel. To me this continues to point to shoddy workmanship at the manufacturing plant. I have pictures of the problem, but for some reason Im unable to copy them to this complaint. Probably because Whirlpool is afraid of pictures that confirm their shoddy craftsmanship!

I bought this to provide A/C to our bedroom during a power outage by use of our Gasoline generator. It is very quiet and provide a very cool air flow. The double vent pipes make it efficient and more than capable of cooling out 15 X 25 foor bedroom. Whirlpool has 28,000 employees in the USA.

The exhaust fan for the gas range runs when using the microwave. The noise is loud and very aggravating and there is no way to turn it off. From what I can find the older models there was an option to turn it off. On the new models Whirlpool cut costs by not putting a small (QUIET) fan in the microwave but used the range fan for a dual purpose.

Purchased 29 cu ft French door Bottom Mount Refrigerator 9/5/2013. The ice machine started leaking continual water by August 2015 and by October 2015 the freezer quit working. Have had it repaired once and the second time the repairman said we need a new evaporator and condenser. Called Whirlpool and they said since it is out of warranty we are on our own. According to both repairman this is a common problem with this model (WRF989SDAW00). I understand that appliances break and they need repaired; however, you would think a refrigerator that cost over $3000 would last longer than 2 years. Do not purchase a Whirlpool French Door Refrigerator; even if you purchase an extended warranty, you will still have spoiled food and leaking water to tend with. We have had nothing but problems with ours.

Purchased a Whirlpool refrigerator model WRF560SEYM in June 2014. In February 2015 the ice maker had to be repaired because of a leak. Now in February of 2016 the ice maker and water dispenser are leaking. Because the warranty is one year, Im basically stuck with a refrigerator that sucks. Not only is the ice maker and water dispenser broken, the door sometimes doesnt shut properly and the shelving couldnt possibly be more cheaply made. This refrigerator is in a vacation home and has barely been used. I have purchased many Whirlpool appliances on the past and have never seen such poor quality in an appliance. The only thing Whirlpool can offer is sorry youre stuck!! No more Whirlpool for me!!

WHIRLPOOL MICROWAVE HAS HAD MAGNETRON GO BAD 3 TIMES IN 1-1/2 YRS! I bought a Whirlpool Microwave Hood Combo Oct 2009. July 2010 the magnetron went in it! December 2010 the magnetron went in it AGAIN! This time we had to pay the labor to have it repaired because it was 2 months outside the warranty period. We did not want to pay because we knew having the same part go twice in one year that something is wrong with it. Whirlpool told us that if it happened a 3rd time that they would most likely replace the appliance for us. Well....July 2011 the magnetron went AGAIN for the 3rd time! Whirlpool told us to take it to a licensed shop to have it diagnosed to prove that it was the same part as the previous two times, fax paperwork from the prior two times, and have the shop call in the diagnosis of the 3rd time. We did all that, and they told us they wouldnt do ANYTHING for us because it was outside of the warranty period! Well they knew that when they told us we had an opportunity to get it replaced! THE SAME PART WENT BAD 3 TIMES IN A 1-1/2 YR PERIOD OF TIME. We trusted that the Whirlpool representatives were being honest with us during those phone conversations. Whirlpool can not explain why representatives would give us hope of a replacement (although each conversation is documented by their login and employee ID number). So not only did I buy a brand new MSRP $619 microwave, I paid to have it repaired the 2nd time, and to have it diagnosed the 3rd time, uninstalled and reinstalled the microwave each time, the inconvenience of not having use of the appliance during each occurance, and the unbearable suffering of calling in to customer service and repeating the story over and over to each representative. My house is brand new (we moved in to it November 2009); we bought ALL our appliances from Whirlpool. All I get for an answer now is sorry. That doesnt help me any financially having to repair and now replace an appliance that has been in use for only 1-1/2 yrs! I have seen $39 microwaves from WalMart last several years, so what is wrong with Whirlpools manufacturing?! Customer Service is unreliable, untrustworthy, non-sympathetic, and insanely frustrating! My question for Whirlpool is...why cant you make a product that lasts better (better quality=longer life=healthier environment and happier customers)? Why cant you stand behind your products better? Dont you care about the impact youre making on us emotionally, financially, and environmentally? The model # is GMH6185XVS0 Serial # is TRY3111264.

Washer does great job and happy with the results, very well. Appearance of dishes are good and leaving dishes very clean as well, would recommend this dishwasher to anybody. The color is also great and matches up with my stove and refrigerator, making the kitchen look very nice and great approach for other appliances to match.

Owner of 20 apartments, 16 of them have electric water heaters and 4 have natural gas units. Have replaced over the years all 20 water heaters. 19 of them were replaced with Whirlpool units bought at our local Lowes. It is my opinion that they are very unreliable. The tanks rust out in NO time. The electric units last just a little better than the gas units but still terrible. Of the 4 gas units so far I have had to replace 3 of them and the longest one lasted 6 years and 7 months!! One of them was just over 6 years and the other was 9 days away from warranty expiring. They replaced that one. If you have no other choice make sure to buy extended warranty if available. They just dont last!!