3-4 years ago, I had replaced my hot water heater with a Whirlpool, which was purchased at Lowes. On 10/23/11, I awoke to a flooded basement from the said water heater. When I entered the basement, I was able to verify that the water was spraying right from the casing of the unit. Who knows how long it had been spraying, but the place was a complete mess. The water was about 10 inches deep and many things were ruined. I proceeded back to Lowes and purchased another exact unit. This morning I awoke to the sound of what seemed to be water bubbling, only to enter the basement and see exactly what I saw just three weeks previously... another flooded basement from water just pouring out the side of the unit. This is an obvious defect in craftsmanship. Now I find myself with a flooded basement, no hot water, and a decision to make. Do I fight for another replacement or give up on the brand? A replacement water heater will solve my lack of hot water but for now, the question is for how long? Not to mention the cost and time spent with the clean up I did twice.

Whirlpool microwave model # gh4184xsb1 handle is falling apart. I have replaced the hood vent twice and the entire door once and now, its the same problem again. The plastic becomes brittle over a year to two years of use and falls apart. Whirlpool will only stand by their one year warranty, and is not concerned about a problem that many of its customers are having. I have read many complaints on the web about this same problem. My wife and I have decided never to purchase Whirlpool products again.

After the one-year warranty ran out, my wife ran the self-cleaning feature, which since Ive found is a well-documented problem in online forums. The oven overheats and blows out the thermostat, fuse and some other cylinder device, all in all a $600 repair. I am furious that both Whirlpool and Ikea (where we purchased the electric oven) keep completely silent on this issue, not bothering to tell homeowners to use this function at their own risk. Just wipe it out! The well known nature of this self-destruction and potential high cost of repair should be information given to consumers, but of course this would affect their sales numbers. BE WARNED!

We bought a Cabrio washer & dryer September 2010 for a room addition that wasnt completed yet. We didnt get moved in until the first of November. So the washer wasnt used until then. In January 2011 (15 months later) it stopped spinning so clothes were dripping wet. We called Whirlpool and were told that they would be happy to set us up for a service agreement for $322 for one year. We declined since we bought the washer for a little over $500. When we had a local Whirlpool service man come out and he determined that it was the control board which would cost $265 (Whirlpool only warrants parts 90 days). I sent an email to Whirlpool and was told too bad, so sad. We called their customer care line (that is really not the term for that phone center) and asked to talk to a supervisor, who essentially told me the same thing. Whirlpool is making equipment that is extremely poor quality. There is no incentive for them to produce a better quality product as they make money on the extended warranties that are necessary, or if you dont buy an extended warranty they charge an extraordinary huge price for their parts, which they dont warranty. We will never purchase anything made by Whirlpool. I am not sure where this useless piece of junk that I have will end up but I intend to let everyone I know what a terrible company Whirlpool is to deal with.

We bought a Whirlpool Cabrio 6300 washer based off the salesmans recommendation (not very happy about this). After the warranty ran out, every time in the spin cycle, it makes a sound similar to a piece of metal banging around inside the cylinder during the cycle. Our friends have told us they had a similar experience and for their machine, they found out the bearings were going out. Weve had this machine a total of 3 years. I doubt we ever buy another item from HH Gregg plus will do our investigation on Consumer Buyers digest before we toss any more money out for a washing machine.

My 3 door fridge is roomy, well lighted and well organized. I love the fact that when I open the doors, I can see everything at a glance. The freezer section is also well organized and holds plenty. Being able to get filtered water and ice in the door is convenient. The main reason I picked Whirlpool is that it is made in the USA! I want to support American manufacturers that employ my fellow citizens.

Very unreliable oven. Oven temperature never seems to get to the proper setting. Do not buy any Whirlpool appliance. They do not stand behind their product. A stove should be relatively simple but Whirlpool managed to produce a product that is complicated & unreliable.

I bought this washing machine after having my Kenmore for 20 years. This washing machine is a nightmare. I have to wash my clothes 2 or 3 times, to get them clean. Everything has residue on them. Once a month, I do use a cleaning tablet, and between loads, I wipe the washer out too! This is the biggest piece of junk! Save your money. Buy an old school washing machine.

Brand new dishwasher never worked. After getting the runaround from Bethel Park Home Depot. I was told I had to call Whirlpool. After being on hold 3 separate times for more than 12 minutes each time, they scheduled a repairman in a weeks time. He said the motor was bad and had to order. Wont be back out until after Christmas. I asked Whirlpool to replace this lemon. Customer service told me they never replace if they can fix. What if something else is wrong? They didnt care. Very rude. Told me manager would tell me the same thing. Never buy Whirlpool. Appliances are faulty and customer service rude. This has been a nightmare experience. Feeling very helpless at this point.

Thank God for this website and Frank of Dover (postings on Feb. 11, 2013 and Jan. 7, 2011). We just had exactly the same horrid experience with the lid on our Whirlpool Cabrio Washer WTW7800XW. Just as with Frank, our home warranty provider first accused us of abusing the machine. I merely printed out Franks comments and description, whereupon the home warranty provider reluctantly agreed to replace the lid. We also bought an extra lid and are keeping it in our attic for the next failure. Do not purchase this washer!

Bought new from menards. Doesnt work properly, doesnt wash right and cleans poorly. It too bad because I thought I was upgrading from my old Whirlpool washer that was 15 years old so I order the new cogs for the agitator on the old machine and now using it again. Works better than the new one. Sad that whirlpool wont stand behind the product. Might as well be made in china.

I purchased the Whirlpool Cabrio washer and dryer in 2007. They have been the biggest pieces of junk. One year after my purchase, the water pump broke and had to be replaced for $100 and that is with my husband doing it. Then the dryer broke twice. Now, the washer is not spinning. He took it apart and I purchased $80 in parts. It still doesnt spin. He thinks the motor went and it gives a p50 code. This washer does make holes in your clothes. So many of my summer tops were ruined because of this washer. A friend has the same washer and she started getting the holes in the clothes, so that is how we figured it out. Today, I went and picked up a washer at my rental home, a GE that is 10 years old. My clothes never felt cleaner and it runs like a charm. That Cabrio always smelled like mildew because it seemed like all the water didnt drain out of it and it would sit in the bottom. What a shame. Its only 6 years old and I paid $800 for it and for parts. My husband cant wait to put it on the curb on garbage day. My friend warrantied hers and when the guy couldnt fix the problem, they gave her partial money back. At least she got something. These should be recalled and we should get partial money back depending on how old it is. I will tell everyone not buy these. They are the biggest pieces of junk!

On May 25, 2008, I bought a Whirpool Model# BFG1J4040T3NOV 40 gallon natural gas hot water tank. The pilot light went out today, Sept. 26, 2011, and it will not re-light. This was bought at Lowes and was rated as a 12-year warranty on the tank and parts. This is premature failure of a product that is listed as 12 years. Due to all the other similar complaints of this Whirlpool hot water tank, I would like my money back ($455.81) plus installation or a new tank installed.

My new energy-saving Whirlpool washer sucks. Laundry comes out smelling as bad as it went in. Washcloths are as dirty as they were when they went in. I have to take my dogs bed blankets to my sons home to wash them because this new washer will not even clean blankets.UPDATED ON 08/21/2015 - I have had two Whirlpool washers in 38 years. They were great. I buy a new up to date energy-saving Whirlpool washer and it doesnt last a year and a half. Now it is costing me $433 to have it repaired. I am preparing a washer and I am very unhappy with to start with. I will never recommend these washers.

I had problems with the door closure on day 3 of my French Door Refrigerator Model # WRF560SEY. The flap on the left door that seals them fails to fold back if I open the right door first. Which didnt seem like a big deal until I tried to close them and have to remember to close the left door first or itll bang against the right door and Im afraid itll break that piece off then the refrigerator is worthless. The manufacturer drop shipped a new piece, after several attempts of adjusting the closure, and it still does not work. I have written Whirlpool and am told they have a new door on order but it will take 6-8 weeks, that was in March. Now when I contact Whirlpool no one ever returns my calls or emails. I have had the refrigerator only for 15 months and I have fought with either the store or Whirlpool since the third day of owning it. No one cares as long as the appliance is paid for. I will never buy another Whirlpool appliance.

After the second year, everything stated to fail. The pump, the main control, even the mounting straps all failed. We are very glad we got the extended warranty. Parts alone have exceeded $400.00. Right now we are dealing with the loads not drying.

Do NOT buy this washing machine. It looks nice but that is all. My elderly parents bought this washing machine based on the past experiences with Whirlpool but the quality of the product has changed. This machine constantly errors and does not allow them to wash clothes. I have followed the instructions in the manual to try and clear the errors. I ended up calling Whirlpool and the response I got was... It will be anywhere from $80 to $125 for someone to come out and look at it. This is a product which should not stop working after 2 years. I guess Whirlpool only stands by their products for a year because they think it is only built for a years worth of service. I wish I had better things to say because the previous Whirlpool machine lasted over 20 years.

Whirlpool’s water heater coupler. Our plumber came to our home and explained how there was a problem with our type of water heater from Whirlpool that had been sold from Lowe’s between 2000 and 2006. We purchased ours in 2004. I have the receipt. Our plumber stated the underneath screen was clear and in good shape. He also said they had other water heaters with the same type of problem and those companies had provided the new part free and free shipping due to the suit. Whirlpool has not. We have been without hot water for a couple of days and we are hoping to have the piece by tomorrow. Since this suit has already been dealt with, then how do I get my money back from Whirlpool for being dishonest with requiring me to pay? Do I need to file something? I have followed the links and I have been researching it and our model number and serial match the product that was found faulty.

As with other posts here, the rear bearing is going out of Whirlpool Duet front loading washer. I purchased mine in late 2008. Moderate use always according to recommendations. I called Whirlpool and same story--no recall and it would be expensive to have it repaired. I cant see putting $400 to $500 in parts even if I repair it myself. I cant believe that with such a common problem, Whirlpool wouldnt either honor a repair or offer a reasonable bearing package to fix. It requires the entire back, half of a new drum. Poor design, but whats worse is no effort by Whirlpool to rectify the situation.

Late on the evening of Monday, January 27, 2014, after springing a leak in my 8-year-old water heater, I purchased a new Whirlpool model N50T61 replacement from Lowes. Installation went smoothly and the unit lit off fine the first time. It heated the initial tank of water rather quickly, but the next morning, I noticed the status light on the control unit was not blinking, which indicated the pilot light had gone out. I relit the pilot light, the water heater fired off and appeared to be working properly. 12 hours later, the status light was out again. I relit the pilot, but within 20 minutes, it went out again.On Wednesday, the 29th, I called Whirlpool customer service and explained to the representative what had been happening. He stated that since the status light was not blinking a code, the problem was either an air supply or venting problem, and he couldnt help me. I relit the water heater again and performed the match smoke test described in the owners manual on the vent connection. It did exactly what the manual said it should do, so I assumed that was not the problem. However, while performing this test, the water heater went out again. This time, being right there when it shut off, I saw the status light blink twice about 5 or 6 times before it quit blinking all together. The two blink error code indicated low millivolt signal from thermopile.I called customer service again and explained to the representative what the first person had told me and also told him the results of my test and that this time, I had observed the two blink error code. He asked if I had a multimeter (which I do), so he had me disconnect the wires for the thermopile, connect the meter to the wires, light the pilot and read the voltage. My meter is an old analog unit, and not capable of reading millivolts (which is what the thermopile output is), and I informed the rep of this, but he had me do it anyway. As I suspected, I saw absolutely no reading on the meter. The service rep stated that he believed the error code and decided to send me a new thermopile assembly. However, their shipping department was closed for the day and I should not expect to see the new part until Friday. This was unacceptable, but he stated that this was the only option available to me.After thinking about this situation for a while, I again called Whirlpool customer service and told the representative that I was not satisfied with the solution previously presented to me and that I wanted a return authorization to take the water heater back to Lowes for replacement. The rep stated he couldnt do that, but said that there were a couple other things I could try. He attempted to explain these procedures to me, but wasnt able to do so clearly. He stated he would email the instructions to me. As of this writing, I still have not received the instructions.In the meantime, I did some internet research and found that Whirlpool water heaters have numerous chronic problems, including the issues I was experiencing. I decided this was not a product I cared to own. I called the Lowes store where I purchased the water heater and spoke with the manager. I explained the entire sequence of events to him, and he told me to bring the water heater back for a full refund. Since my local Lowes store only sells the Whirlpool brand, I took the money and purchased a different brand of water heater from another home improvement store. Needless to say, it will be a cold day in hell before I ever purchase another Whirlpool product.

I have the Cabrio model WTW6400SW2. I have had it for 5 1/2 years and have been happy with it up until several months ago. The F1 would come up when the machine would lock and just start to fill. I could pause it and start it again, and it might do this 1 to 3 times. It would also do it on the rinse cycle. I have been using it because I did not want a repair bill right now. The machine was also starting to make noise when it was spinning. Well, I just happened to break my dryer yesterday so I thought I would get the washer fixed also. Well, the repairman said that the controller would cost $200 for the part, and then he said the pump roller and bearings were going. By the time you add on labor, he said, “You might want to buy a new one.” He told me that Whirlpool has completely changed the washer now because of all the problems with them. He told me to look it up on the computer, and maybe there would be a class action suit. After reading some of the reviews, I will not buy another Whirlpool again.

Sounds crazy, but the outside of my stainless steel door is all dented. I live alone and one day noticed that it looks like someone body slammed my fridge. Is there air in the door panels that could be escaping or something like that? Anyone hear of this?

I have been buying refurbished appliances and this one we bought it brand new. Its a great buy and it will last a while. It does a good job washing and the clothes come clean and almost dry to the touch.

Microwave Model # MH1150XMB# - I have had this microwave for 6 and 1/2 years. It came with the condo I purchased. Shortly after I moved in, I noticed hairline crack in the frame near the handle. I have replaced this door once and now the second door has done the same exact thing - formed these hairline cracks in the door frame. This is a defective product and needs to be taken care of by Whirlpool. But you keep denying the problem. No one can afford to replace a door every year. The microwave still works, but the door has fallen apart. The remainder of the microwave works fine.

Yesterday, my DC premier refrigerator purchased on 22.12.2011 suddenly stopped working for a long time, and the inside light automatically went off. All food, vegetables, and others are damaged and rotten. Now we are scared to keep anything inside this for huge loss and health problem. Kindly rectify this, and do the needful at the earliest.

I bought new hot water heater. I installed it did and it did not work. I called them, and they sent a new part. A service man installed it, and it still did not work - he was unable to get it working. They said my gas supply line 1/2 od was too small. I had it replaced to 5/8 od 1/2id, and it still did not work. I called them again. They offered to send more parts and try again. This is a brand new water heater, never fired. I asked if they would give me a ra number so I could return it to the store. He would not give it to me. He insisted he send some one out to try to repair it. Meanwhile I have had no hot water for 2 days. He told me do what I have to do and hung up on me. So I removed the heater and took it back to Lowes, where they were glad to give my money back. But still, I lost a day of work and paid the gas yo bring it back. I went to home depot bought a GE hot water heater. I had it installed in about 15 minutes and it is working fine.

In open concept homes, manufacturers need to consider the refrigerator’s noise — ice makers included. We hear every single clink and buzz. We love (and prefer) the french door concept, but the freezer drawer, when it’s fully loaded, is difficult to open and close. Also, the stainless steel scratches WAY too easily.

I bought a whirlpool cabrio with high hopes. Unfortunately, it has been the worst washing machine I have ever had. Then I moved in with my fiance and he too had a cabrio. It too is a piece of junk - and brand new! Every load comes out with left over residue and the clothes look worse than before they went in! I have tried everything and I do mean everything! IM 41 y.o. - IM well aware of how to load a machine. I load it just the way the instructions say: as if there was an agitator there. Ive tried using no laundry detergent or fabric softener - clothes still come out disgusting. Ive made sure the screens are clean, doing extra small loads, turning on the extra rinse, everything! Ive called whirlpool, but there is no such thing as customer service anymore. They just blamed me for not loading the clothes properly and blew me off. The machine becomes unbalanced very easily (it is leveled on the floor), sometimes the clothes are still soaking wet at the end of the cycle and sometimes all knotted up. This is a horrible machine!! I wish I could say it makes me feel better that IM, by far, not the only one having issues with this piece of junk!

Weeks ago, we received a new refrigerator from Whirlpool. Never really got down to temp. They replaced the compressor and still does not work. You would think a company like Whirlpool would replace it. That is a joke. They want to try and repair it again, another compressor? Now I have thrown out the food in it and feel like Whirlpool could care less. DO YOURSELF A FAVOR< DONT BUY ANYTHING MADE BY THIS COMPANY OR THEIR OFFSHOOTS.

Whirlpool has always been a quality product in my household. I had Whirlpool microwave prior to the one I recently purchased. It lasted 10 years and was used frequently and always on daily basis. It worked like a dream and I would never purchase any other brand!

I filed a complaint late Oct. 4, 2011 about a problem I was having with one of my Whirlpool water heaters. Chris from Whirlpool emailed and phoned me twice within 12 hours! He was courteous and very helpful. He shipped the parts that I needed overnight. They came in this evening, I installed them and everything is working great! Thanks to Whirlpool and Chris, we now have hot water!

I have had this unit less than a year and started having pilot problems. I would just relight and ask family members to take shorter showers or not run the washing machine or dishwasher at the same time. I would have to relight the pilot 3-4 times a year and would just tolerate. Now the water heater fails on a daily basis. In the last four weeks, my wife would say NO HOT WATER AGAIN. I am so tired of dealing with this, so last night, I called Whirlpool and associate was polite but gave me a lot of things that I should do (43 yrs a pipefitter). Before all was said and done, he is shipping me a new gas valve (at my expense) that I will gladly install to get rid of this problem. Will not EVER buy a hot water heater from Whirpool or Lowes ever again. Whirpool should stick to washing machines!

I closed on our new home in December 29, 2019! The first issue we experienced with our Whirlpool Oven was March 2020! The first technician who arrive in March 2020 was supposed to replaced two parts, but, one part in her possession was the wrong part that Whirlpool ordered for an electric oven, not a gas oven! Since March 2020, three additional technicians have been sent out from Texas Home Appliance Center, and accomplisnhed nothing! As a matter of fact, the third Technician, Edward, came out to service the oven and all he did was turn the oven on! He had no instruments and did not appear to check on any other issues! Three visits from Technicians later, I finally received a call from a Whirlpool Supervisor, today approximately, 1:47pm CST! Her explanation was the following: The documentation from the so-called professional technicians stated there was no issues with the oven! Even though the oven is still not operational according to its specs! Theres even one part that is missing where Whirlpool ordered the wrong part, ac cording to the Technician. And, we never heard from that Technician again with respect to the followup on the missing part! The Supervisor I spoke with today ~1:47pm today, Dec 9, 2020, stated I was welcome to call again to place a warranty work order, but, if they dont find anything wrong with the oven, I would have to pay for the visit! This is ridiculous on many levels. I will be writing other reviews to influence the public not to purchase Whirlpool Ovens if this is the kind of Customer Service Orientation they will received. This is unacceptable Customer Service Orientation! I have a Whirlpool oven, where 3 techncians have serviced it, and, it still doesnt perform correctly! It still takes 30 minutes to cook a can of biscuits, and, they still required more time in the oven! Whirlpool states if the documentation from the technicians states the oven is working properly, then, Whirlpool cannot do anything for us - even though the oven is still under warranty! UNACCEPTABLE! Ive purchased my last Whirlpool Oven!

I bought a whirlpool 40g gas heater with the Honeywell gas valve. In 5 years Ive had to replace the valve two times. Thankfully the valve was under warranty both times. Our old water heater was Twentynine years old before it started to leak, this new electrical diagnostic high tech gas valve keeps breaking showing a overheated error and the only way to fix it is a new valve that only Honeywell sells thats well over 100$. Talk about a scam!!

Whirlpool Cabrio Washer - Owned this appliance for a couple of years and we are constantly receiving UL and F 51 codes on display. Washer stops spin mode after washer shakes violently.

I love my Whirlpool 4.7 cu. ft. top load washer because it has a pretreat station that is super handy for pretreating stains in a handy little place. The agitator is stronger than my old washer and really gets my clothes cleaner. Its also very quiet and easy to use all the buttons. The best feature is the deep water fill that you can select for more water.

I got a Whirpool Cabrio Washer that I purchased in 2008. I am constantly getting ul code. If washer is leveled, it leaks water out the bottom rear of the washer. Its a piece of junk. I called Whirpool to no avail. Whirpool will not stand behind their product. They know they have a problem but wont do anything about it.

I purchased a Whirlpool oven 14 months ago. I just paid it off 2 months ago. The oven stopped heating. I talked to Whirlpool... and basically because I did not purchase the extented warranty I am SOL. I will never buy a product from them again. Complete junk.

My new washer quit working properly. It does not spin or wash properly.

I bought the Whirlpool Duet front load washing machine. It was a piece of junk and I bought it 3 years ago. Sounds like a jet taking off during spin cycle and drain.Well, let me tell you, its terrible. It walks out of the space its in during spin all the time and the F Codes. Im done! Just replaced the pump and motor for the drain on the thing and unplugged it several times to reset it. Still is giving me F codes.Im done, I tell you! Done! This has been going on since we bought it!

Purchased this beautiful sleek Cabrio washer in May 2012 from Appliance Smart, with its modern looking glass top, it looked so nice. The washer itself works ok for now, but it does unbalance a lot, thats not main issue. We deal with that. The poor design of holding that sleek glass top in is the problem. After a little over two years, it started cracking at the hinge that is just mounted in Plastic which holds the whole lid down, including the heavy glass. The glass started raising up, causing steam to escape. The lid is rubbing and very difficult to open. Appliance Smart is gone now.. We called the service repair person about 6 months ago, he looked at it, said its a problem that is not covered on our warranty and it would be approx $350.00 to repair!! So today, tomorrow or next week it will stop working because the lid is popping off! Its a terrible design, dont be fooled by its sleek look. The manufacturer takes no responsibility for this major design flaw. Beware, the very thing you need to be fixed wont be covered under warranty, lemon law, or just good customer service. We have owned several Whirlpool appliances and doubt that we will own one again, due to the way this issue was handled by Whirlpool.

Whirlpool Energy Smart Residential Electric Water Heater - On top of this water heater is a junction box. If it goes out, so does the water heater. I am on my fourth junction box, at my expense on three of them plus the electricians bill times two. They finally sent me one free!

Bought the model before this just over 2 years. Conveniently it broke just after the warranty expired. I chose not to buy a extended warranty as my last fridge from KitchenAid is over 20 years old and never had a single problem with and still operates like NEW. I can’t say that for my Whirlpool which was very expensive. It has been with an issue within the ice maker for over 8 months. Every computer board has been replaced twice with no fix. Then tried to replace the cooling fan within the ice maker unit seven times. Whirlpool could not find the right part, as the wiring had changed mid model and have no record of when it was changed and what models affected.Certified Whirlpool technician was great and so apologetic. I had taken 7 Mondays off to meet him to only have the wrong part time and time again. Whirlpool support tech line basically said he was wrong, yet I witnessed all visits and my 3 plug fan unit did not match Whirlpools newer part that was 2 plugs. I was not happy missing so much work because Whirlpool is incompetent. Finally my tech ordered a whole new ice maker, including the cooling fan. Lo and behold, Eighth time, parts did not match. He again called Whirlpool tech support and reordered another set one final time. Another Monday to find that this time the parts did fit, but cooling fan still did not work. He called Whirlpool tech support again. They started to trace wires one by one.Whirlpool tech support said it was a bad or broken wire somewhere in the cavity of the fridge buried in insulation and was not replaceable. In other words I have a $3000+ refrigerator that is useless. Whirlpool said they would replace the unit. But when I called, they said since I didnt have an extended warranty, they would prorate it and it’s going to cost me over $1000 of my money to to replace due to a manufacturer wiring defect after only 2 years. What the Heck, I was willing to pay to fix it, but Whirlpool can’t fix it. Don’t buy a Whirlpool product as they are Junk and do not stand behind their BRAND!!! No matter who I talked to, they kept falling back to their word track of it’s my fault I didn’t get an expensive extended warranty, yet they can’t fix a wire they installed incorrectly.Wires don’t just break after 2 years. You get longer warranties for cars for the Love of God. I asked them to just send me the money they were willing to put towards a new Whirlpool fridge, so I could buy a Real Brand that stands behind their products like KitchenAid. Of course the answer was NO. Buyer Beware, don’t buy a Whirlpool anything. Did I mention my Whirlpool certified technician was having a Whirlpool dishwasher issue that Whirlpool can’t fix and that’s his profession. Same type of response. Don’t Buy Whirlpool Products, they are Junk and you will get No support from Whirlpool!!!

We bought the Whirlpool NU50T122-403 50 Gal water heater from Lowe’s and very disappointed that after 3 years it will cost more to repair it than replace it. The Whirlpool gas water heater and our Whirlpool refrigerator have been the worst purchases ever made. Whirlpool has been unreliable in our house and the repairs and downtime have been extraordinary. We have replaced with a Rheem from Home Depot.

Do not buy a Whirlpool refrigerator. Worst product ever. Literally broke within 3 months. Needs a new compressor and evaporator. They will not exchange the product and the parts are on back order for 3 more weeks.

Never buy a Whirlpool water heater. Theyre junk and they dont honor warranties. NO wonder theres a lot of bad reviews. Im one of those suckers. You would think Whirlpool would do a better job. But the blessing in all this I wont have to deal with Whirlpool again. Including washer and dryer, ref, stove, dishwasher and etc.

I replaced my 12 year old Whirlpool double ovens with the current Whirlpool double ovens. The new 30 built in double ovens have been re-designed to vent the heat below the lower oven. The ovens come with a part that pushes the heat down instead of straight out. My built in ovens have a cabinet drawer below and after using the ovens just 4 times over the holidays I noticed the heat is damaging the finish. According to Whirlpools service center I should have checked on that before buying/installing. They told me to stop using my ovens, that this is a fire hazard, but they are not responsible. They do not have a solution to this problem. This is a poor design on their part. There is a disclaimer in their installation booklet that came packed with the ovens that the installer gave me. It says the cabinets need to be able to withstand the heat of the ovens. The cabinets can handle the heat of the ovens, just not the hot air venting directly onto the cabinets below the oven. Where does one find cabinets that can withstand 400 degree heat being pushed directly onto them? As a customer I did not have that information until after the ovens were installed and it was too late to purchase another brand.

whirlpool Cabrio Washer - I replaced my front loading Duet with this, thinking I was done with front loader. Designs are set to fail, liked the idea of no agitator, thinking can clean a lot clothes at once, boy was I wrong, heavy loads wont spin dry, forget sheets or blankets. The machine just stops, leaving everything soaked and you basically screwed, you can invoke a spin cycle but to help make rinse and spin out, sooo disappointed. Whats wrong with the designers of this product? They didnt try sheets to see if it would even work. I am far from over loading this too. Dont buy this.

This dishwasher (model #WDT710PAYM5) leaked water after having it for 9 months. Service man came out to look at it and said it wasnt level. The very next day when I use it the water came out again on my wooden floor. Now the wood floor looks like it has water damage. Sadly this floor was just installed.

I purchased this Refrigerator Model #wrb322dmb, bottom freezer, 21cu ft. last year on July 3, 2015. In September I noticed rust spots on the top door. I called Home Depot where I purchased and they directed me to Whirlpool. I did purchase an extended warranty with Home Depot. Whirlpool did replace the top door. Thought that took care of it. Today one year and two weeks out of warranty, I again notice rust on both doors. Called Whirlpool. They said too bad out of warranty, not considering I had a previous report of this very same issue. So since I am very unsatisfied with this result and the fact that an expensive product is rusting, I decided to share to try to prevent someone getting stuck. Stainless steel is not supposed to rust which leads me to believe that it is not Stainless steel, but a Stainless Steel finish and not a very good one. So I am stuck with a rusting $1200.00 refrigerator only after one year. I have always purchased Whirlpool, but no more. They lost a 40-year customer. I have always bought American made but no wonder people are not buying American made any longer. TO SUM IT UP WHIRLPOOL STAINLESS STEEL APPLIANCES RUST! DO NOT BUY!

You have to take into account that this microwave doesn’t heat up as others I’ve had so even if the instructions call for something to be cooked for 5 minutes, you have to add at least 2 minutes more. If not it would be undercooked.

We purchased a Whirlpool Cabrio washer 6 years ago. This washer has been such a terrible appliance, I would not recommend that anyone buy one. The top of the washer has broken 2 times. Whirlpool will do nothing about it. It is a manufacturers defect where the glass pops out of the top and then breaks the frame it is in. We had it replaced last year and the new one is now broken - same problem. It also does not get clothes clean and the clothes get ruined because they become all entangled in one another. We will never purchase a Whirlpool appliance again. I did have a 5 year service contract on these appliances but once out of warranty - you are on your own.

Whirlpool Cabrio top load washer: nice job Whirlpool! You designed a washer that breaks if you accidentally wash a coin! For the second time in a few months, were fixing our washer because a coin was in a pocket. The coin gets sucked into the discharge pump and sounds like popcorn popping when it drains. It rattles around the inside of the machine’s pump until it breaks the plastic pump housing. You will know when this happens because there will be water on your floor. Did you ever consider a screen to prevent a coin from ruining the washer? God forbid someone leaves a coin in their pocket. Well, if you leave a coin in your pocket and wash your jeans, it will cost you a repair every time with this hunk of junk. This would be my last Whirlpool. It will actually be cheaper to throw this thing out and buy a new one, since it won’t be the last time a coin accidentally makes it into the washer.

After just 22 months I need to shell out $300 for a new microprocessor. My Miele lasted for nine years. In the olden days washing machines could last for 15-20. Do not buy Whirlpool, from what I understand its a dying company...

CABRIO GETS A ZERO RATING. We are sorry we ever bought this washer in 08. The unit had a defective main control board and was replaced in 2012. The factory authorized service agent from A&E literally robbed us of jewelry while in our home. Now the main electronic control board needs to be replaced again. Neither Whirlpool or their authorized agents are truly customer service oriented on the defective product. Neither are willing to make an honest attempt at regaining our trust. I have contacted both and neither will acknowledge or offer reconciliation. The problem with the main board and the recurrent F-50 error has been denied by Whirlpool although acknowledged in numerous consumer forums as this. Our family is now without a wash machine. We have not even received a simple apology for the theft from the service agency - even though their employee has been arrested. BEWARE!

I have had this machine (Indesit IWDE126 Washer/Dryer) for a very short time; the washer is great. It does a 20 minute daily wash which is good however the dryer part screws up everything you put into it and ironing, even with steam, makes no difference at all. The WORST part is the organisation DONT CARE. I wrote to the Chief Executive, Jeff Fettig, who neither acknowledged my complaint or responded to it. I made this complaint in October 2016 and STILL do not know what the outcome is. If you are reading this review I honestly would look elsewhere for a better machine. Try MIELE. They are expensive but 2000% better.

My NEW Machine Top loader HUGE drum. Have problems with clothes not looking like they’ve even been washed, Spun so hard they are twisted all to heck. And white stuff - my oxy powder maybe? Not dissolved. My old machine was a Kenmore 30 yrs old. Thought I’d be able to trust whirlpool but not sure. Am I missing something in the loading process. Seems to read something bout not Covering the knob on the bottom. Is this true?

I purchased the model WDF530PAYM0 serial: F14106104 dishwasher. The foremost reason I purchased this was it had nylon racks. I have discovered that the racks are rusting! It is rusting on the ends where nothing can touch it. I am very disappointed that it is advertised having nylon racks and now it is rusting and deteriorating. This dishwasher states racks-nylon, not racks-nylon coated. I just took some pictures of the racks. I decided to look underneath the top rack where the upper spray arm is located. Now I am plain sick! Most of the underneath is rusting. This dishwasher was purchased and installed 2 years ago. I paid $600 and you would assume that something mechanical would quit after years of use on an average of 1 to 2 times per weeks. Not this one...rusting racks and hard telling what damage the rust flaking off during running is causing to the mechanical components. Lesson learned: Their definition of nylon and nylon coated has no difference.....I very much disagree!

I am a working single man. I needed a used washer. I shopped the new washers but they were a lotta money. I seen many of them were without agitators. Well heck... who am I to judge the progress in technology?? So, going around to the used appliance store I run across this Whirlpool Cabrio. OK, Whirlpool meant quality my entire life. So, I bought it. MASSIVE MISTAKE!!! This POS is no washing machine. I dont know what it is, but it is NO washing machine! It is a machine that runs a very few gallons of water into a load of clothes and makes them wet, and that is about it!!All I know is the federal government is dropping the ball on this situation BIG TIME!! To allow a company to foist off on consumers such a PILE OF JUNK!! The pile of crap is PURE junk as far as simply doing its job... washing clothes!! It is a DISGRACE of an American product, and I will NEVER buy anything made by Whirlpool the rest of my life!!I took the device off the lid that tells it when the lid is closed, and just stuck it in its receptacle in the body... so I could raise the lid while it is running and watch this POS in action and try and figure out what the hell is going on. First big problem is it NEEDS an agitator!! Obviously Whirlpool had not figured out how to make the clothes circulate without one. Second is the water level (no matter what cycle setting) is obscenely LOW!! The clothes do not circulate AT ALL, and about 1/3 of them do not even get below water level for the entire cycle!! What I am forced to do is use a water hose and run a lot more water off into the tub just to get the clothes in the damn water!! And ever at that, the clothes still do not circulate AT ALL!! They just rub up against each other!! And I have to use twice as much soap than called for!!

Worst appliance of any kind that I have ever used. Has only on/off button, in effect. Wastes water. There is no option to change anything once cycle has begun. No soaking. Occasionally, the machine simply decides to stop and drain itself so that you can start all over again!! No idea how long cycle is. Nearly done? No idea. No matter what temp or how much detergent or how much water, the clothes are not clean. The lid locks and so there is no way to know whats going on. I suspect there is very little water during rinse cycle. All of the whirlpool appliances are similarly horrible. Washer is the WORST. Shame on you Made in America.

After 25 years my Maytag died. It was a Sunday so we just decided to go to Lowes & purchase a new one. They could not find my 1st choice so I bought the Cabrio. It is the worst washer I could have purchased. It determines the amount of water you need. Our clothes never seem to be clean & its very noisy. It has no agitator & is supposed to save water. Even putting it on the longest cycle our clothes do not appear to be clean.

After doing much research on refrigerators, I chose the Whirlpool with the French doors and bottom freezer. Within a month, I had to call the repair service. The freezer made a thick layer of ice on the bottom, wouldnt shut properly (I had to keep a heavy box in front of it to keep it closed) and frosted over all the food in it. On his second visit, the repair man told me that the company knows about the problem, that there was a problem in the design of the appliance, and created a piece to be installed in the machine to alleviate the problem. The problem has not been fixed with that added piece, and the repairman has been here a few more times. Now the freezer just randomly stops making ice on top of all the other problems it has. The retailer would not take the fridge back, and I refused to buy an extended warranty for an appliance that the company themselves knows is a lemon.

Washer does great job and happy with the results, very well. Appearance of dishes are good and leaving dishes very clean as well, would recommend this dishwasher to anybody. The color is also great and matches up with my stove and refrigerator, making the kitchen look very nice and great approach for other appliances to match.

Dishwasher leaking thru the diverter motor; apparently the gramet # WPW10195677 gets worn out and starts leaking. They have discontinued the part and can no longer be found. I call Whirlpool and all Parts supplier in my city. Obviously this is something that happens with time (5 yr old dishwasher) and is something very simple to change. But if we cant find the part....what are we supposed to do. Also my dishwasher rack has broken 2 years ago and is holding with zip straps! Horrible product!

The machine never allows enough water to clean the clothes and I do not have the option to add more water or to spin the clothes again. The maker of this machine must think that people do not have the ability to know how to wash clothes or think for themselves. I need a washer that I can tell to add more water or just spin these clothes again. Very disappointed. I need an older model that I can control.

Whirlpool Cabrio TLWasher purchased 2011. Doesnt drain, no spin, inconsistent cycling, poor washing action....wont even attempt to repair, in light of reading product reviews and consumer experiences with this washing machine- $600 junk.

We purchased this refrigerator towards the end of 2008. The entire interior of the refrigerator is imploding. The plastic Whirlpool used to frame the glass shelves is cracking and shards are falling off. There are 3 drawers; one has already fallen because the plastic sliders the drawer moves along has disintegrated. We noticed the small hairline cracks appearing some time ago but never thought they would go to this extreme. Apparently the plastic used cannot stand up to cold temperatures.I contacted Whirlpools chat and was told that the product is out of warranty and I need to place a service call to get new parts. I proceeded to email the CEO of Whirlpool, Mr. Fettig because I dont believe I should have to pay for a service call when its a manufacturing problem. I received a call the day after and was told the same thing; that they are sorry we are experiencing a problem but the warranty only covers the first year. I was told that if there was a problem with the plastic being inferior that they should have cracked in the first year. I responded that the cracks may have been occurring early on in the back of the refrigerator which is the coldest part but were noticeable.Its very frustrating because a refrigerator purchase is expensive and not something that I planned on doing a mere 5 years later. I believe that Whirlpool at the very least could have shown goodwill towards their customers and given at least some discount on the replacement parts or at the very least a certificate with an amount off toward the purchase of a new refrigerator. Its a win-win situation for everyone because the customer is still happy with their Whirlpool refrigerator and/or it guarantees repeat business for Whirlpool. Apparently Whirlpool doesnt care about keeping customers happy and want and/or need repeat business. Its the last Whirlpool I will ever purchase!!!

Whirlpool Cambridge Model #WTW7300DW0 - Someone needs to help us consumers with this wash machine purchase being refund our money back from Whirlpool. It literally eats my clothes. I have 23 shirts that have pin holes in them and 1 shirt with large holes in it. I also have a ruined comforter and blanket. The comforter has soap stains everywhere which dont come out so its not cleaning the clothes, the blanket (which Ive had for over 30 years) was frayed one side, seam torn off - the piece never came out of the wash machine. I have pictures attached of the damaged. Its suppose to be Water Efficient - thats a joke! I do 1 set of king sheets. It runs for an hour and 20 minutes and fills water to the rim of the washer and does this twice. Id like them to pay for my water bills! Oh they came to service it only to tell me I was putting the clothes in wrong. The service company said I had to put the clothes against the sides and leave the middle open. They told me there was nothing wrong but consumer error. Well I did clothes today and aligned them like the service company said - 4 more shirts were ruined. Called Whirlpool today. They said they were sending someone else out to fix the problem and said, Unfortunately, we dont pay for damaged goods. Well from all the reviews I read Whirlpool needs to suck it up and recall this piece of crap they call a wash machine. Did I mention its only 1 year old, yea this is horrible!

I can add my experience with the many others I have read about. My Whirlpool Cabrio washer top lid glass broke in the up right corner after only 2 months use. Like many other reports, this is not due to something falling onto the lid. It happens without warning and without operator interaction. This is a defective design!

I purchased a set of Whirlpool Cabrio Washer/Dryer. After 12 uses of the dryer, it doesnt work and now I have to pay for the service. I didnt think Id need an extended warranty since my other 2 brand name washer/dryers lasted 15 years!

In 2015 door of top loading washer (Whirlpool Cabrio Washer) needed total replacement. Lucky I had an extended warranty. 2018 March, extended warranty expired and now have the exact same problem. Pretty crummy product if major part like a door has to be replaced every 3-4 years. We do not wash large items like blankets/quilts in this machine. That goes to a laundromat where there are oversized machines or to a dry cleaner. So the only reason for this breakage is a default in the lid assembly. There is only one phone number for customer service, repair, parts etc. Put in my service call and filed a complaint at same time hoping for at least a small discount. Ha! $100 plus tax for service call- part price ranges from $150-230 plus tax. Whirlpool could tell me the part exists but would not say how long it takes to get it! Do NOT buy Whirlpool washer with top load lid that has glass window. Big problem is that Whirlpool now has Jenn-Air, KitchenAid, Maytag and Amana all under their umbrella.

I have to say I am taking the time to write a review for my Whirlpool Cabrio Washing Machine since Ive never been this dissatisfied with a product. Every time I wash my brand new expensive black dress pants, I have resulting white marks all over! Im so upset! I washed one load three times with no soap at all just to remove the marks present! At this point, I will never buy another Whirlpool product. =(

My wife and I were gifted a brand new washer (model: WTW7300DW0) and dryer set. We were very excited to try them out as we had just moved into our new home and had been without a W/D for about a week. We ran our first couple of loads and discovered that our clothing was, especially dark colors, covered in white stains. We didnt know what it was so, we did a little research and found out it was most likely soap residue. So, we reduced the amount of soap we were using... and it still happened. We tried every setting available on the touch screen... clothes still came out covered in soap. We eventually called Whirlpool and had a technician come check it out. He ran his tests, said everything was fine, and to use only a teaspoon of soap for every full load of laundry. This didnt sound right to me but we tried it out... stains... still... and I noticed our whites were not getting cleaned very well at all. Sweat stains from undergarments were hardly touched during the wash cycle. After several more phone calls to Whirlpool, were having another technician come out. I just want Whirlpool to take this POS off of our hands and exchange it for something that works. A washing machine that actually washes would be nice.

We bought a Whirlpool Dishwasher for a vacation home thinking it was a good brand. It was not a low end model. After two years of infrequent summer use it would start and then not complete a cycle. Looking on the internet I learned the control panel was known to be faulty. An appliance repair person also confirmed that the control panel was known to be faulty. Why are they allowed to sale defective appliances? I also feel Lowes Hardware is not without blame for unloading faulty equipment on unsuspecting consumers. What recourses do consumers have? I cannot afford another dishwasher after purchasing an appliance expected to last for years.

I purchased my Cabrio washer from Lowes 4 years ago. I noticed the smell and researched issues online. Suggested using the cleaners made for tubs. Im tired of the smell. I had repairman tear apart the washer. He told me they put water in the tub for balancing. Really... the tub is made of plastic. Will never buy anything Whirlpool again.

Model WRS586FIEMO1, Serial # HR50801958. In December ice maker stopped dispensing due to cubes melting and clogging around the auger. After 3 service calls a new door was ordered with a delivery time of 4 o 6 weeks. Have spoken to and e-mailed several customer service people and am told it will be another 4 to 6 weeks. This has happened at least 3 times. In the meantime I must empty and clean the ice bin and surroundings every night or it freezes up and cannot be removed at all. Finally told them I no longer want a new door, I want a different model fridge. Was told they do not replace, only repair. It is now April and they have done neither. They did extend my warranty until December but at this rate that too will run out. Would never buy another Whirlpool appliance or any of the other brands that manufacture.

I had the Whirlpool side by side GSC25C4EYW00 less than a year. The vegetable bin - 2nd from the bottom - front panel broke off. No wonder, there are 2 tabs holding it to the rest of the bin. Its cheap, brittle plastic. Come on, Whirlpool, you have to do better. What a disappointment. Dont buy one.

WTW8800YWO Whirlpool Cabrio washer, 4 yrs old! Replaced!!! Its a poor quality washer -- the bearings go out. I purchased this washer and matching dryer at Lowes following a house fire. I initially thought the water saver was a good feature. Unfortunately, my clothes were not clean and were covered with lint following each wash. I have had to replace the ring inside the washer due to shifting and causing water damage to the new flooring. I soon became disappointed with my purchase, but until the noise became so loud in the spin cycle and the repair exceeded the initial costs, I kept the washer. I am another consumer who would NEVER purchase nor recommend a Whirlpool W/D. The repairman said, If you want a washer built to last, buy a Speed Queen!

I have owned a Whirlpool Gold Series Refrigerator for one year and 9 months. During that time I have had 7 repair issues. Each of the past ones took at least two weeks to repair. This past repair has to be redone because the new parts are also bad. The part is now on factory backorder. It will be at least two months for this to be repaired. Whirlpool says its too bad, we just have to deal with being without a working refrigerator for months. Do not buy this product!!! The warranty only means that you are forced to wait months for repairs. They will not replace, refund, or even extend the warranty for all this downtime. You have no recourse with the company.

The cabrio washer that we purchased in 2010 did a good job of cleaning the clothes but the case started rusting within 6 months. After service calls and e-mails and phone calls, there have been no helpful suggestions beyond buy a complete new case. I hesitate to do that because I am convinced there is a design flaw in the area where the soap dispenser is located which allows the soap to flow between the case and the drum and it eats away theinside of the case through the inadequate paint covering on the outside of the case. It is a mess. Now the instruction panel is bubbling and lifting. I carefully care for my equipment and have kept two washers over 15 years and they still were in good shape with cases still looking new. This is not something I am doing wrong. It is a piece of junk with a terrible paint job and it cost more than any washer I have ever had. I wish I had some recourse. I am on a fixed income and had hoped this would be the last washer I would have to buy. I have photos.

I purchased my Whirlpool refrigerator last Summer and so far I’ve had no issues, no probs! I love the energy efficient refrigerator along with its easy settings and options to use a ice maker. Wouldn’t trade my Whirlpool for any other brand!

I purchased a brand new 2019 Whirlpool side by side refrigerator in October of 2019 for my new house. Yes, that was 2.5 years ago. HOWEVER, I live alone and hardly ever use the ice dispenser. Maybe, it was used 20 times in 2 years. The ice dispenser just stopped working and today I notice the refrigerator is not even making ice! What a piece of garbage!

I purchased a Whirlpool accubake oven in 2010. The repairman has been out to repair it 5 times. Thats right 5 times. It wont maintain the baking temperature. They have changed the mother board, the ignition switch, the harness, and the thermostat. Every time the repairman leaves it works and then I go to bake something and it doesnt. Once it reaches 350 degrees the oven cuts off. You can hear it trying to ignite but its like the fire doesnt catch. I have to shut it off, press bake and heat it up all over again. This is so annoying. Bad thing is I like the look of the oven but clearly this is a shotty product. I will never buy a Whirlpool again.

Extremely quiet machine. I love that the silverware wrack is situated across the front of the door giving plenty of space for lots of silverware. This leaves even more room in the already large washing area for pots, pans, dishes, bowl, glassware & more.

We purchased the Whirlpool Cabrio washing machine around January 2006, and from the start weve had nothing but problems with this appliance. Within the first year, water was leaking under the washer which was coming from a crack in the plastic housing of the water pump. I replaced the pump myself to save on labor. No big deal. The very next year, I started getting the F51 code and there was no way for me to get around calling a service company to have it repaired. $350 and one circuit board later, it was repaired. It remained working without fail until recently when it began giving the same F51 code. Let me guess, another $350 for better repair? I have to assume that the new circuit board that was installed wasnt any better than the original one that was replaced. I wouldnt put another $1 into this hunk of junk and Whirlpool should be ashamed to have this product on the market. I will never buy another Whirlpool product.

As long as Whirlpool continues to use JB Hunt for delivery and installation service of their products, I would stay away from ordering. JB Hunt visited my home 3 times, and each time left with the dishwasher as they arrived without the appropriate tools to perform a basic installation. Whirlpool also sent 2 damaged dishwashers that could not be installed. Buyer beware.

Purchased a Jenn-Air single wall oven model JJW2427WS after seeing it displayed in an appliance store. Oven was installed as directed. Upon viewing the panel, I discovered that it does not light up. You cannot read the function or numbers, never mind start and cancel without a flashlight. I have been a Jenn-Air customer for over 20 years. This is the first time I have been disappointed. Also, has this model been discontinued or recalled?I wrote to the CEO of Whirlpool and explained my problem. I was told that this is not a functional problem, but perhaps a design dissatisfaction. I cannot believe that there are other consumers who are not having difficulty using their appliance without additional lighting in their kitchens.

I purchased a new Whirlpool (2015) Model: WRF736SDAM13 French Door Refrigerator. Two days later, water was dripping from the light in the top of the refrigerator. I was removing about a cup of water twice a day, which dripped from the light. The company was friendly when I called, and offered a replacement or repair. I elected the repair as I felt that would be acceptable. The repair man inspected the refrigerator and determined the problem to be condensation from the water holding tank, located in the top of the refrigerator. He stated that because the incoming water has the opportunity to reach room temperature prior to entering the fridge, and because of the high temperatures (80’s & 90’s) the water holding tank has condensation that collects in the top of the refrigerator, which drips onto the top of inter refrigerator liner, and eventually drips through the light. He stated there is no fix, as it is not broken. While it is not broken, this is a bad design error, which would affect anyone who lives in an area where the temperatures exceed 80 degrees outside, which could only be fixed with a collection tray that would allow the water not to drip into the refrigerator. Currently there is none available. Because I only had the refrigerator for two days before the problem was reported, Lowes allowed me to make an immediate exchange. However, had this been purchased during cooler temperatures, the issue would not have been noticed until after the 30-day time frame and the exchange would not have been an option. When I made the exchange, I noticed that all the 3 & 4 door refrigerators are made the same and will have the same problem. I ended up exchanging it for a Samsung model. Kudos to Lowes. Whirlpool, you need to find a fix for this problem if you want to sell me another one.

The 2 rear steel rack supports were flaming/sparking. I was told by Whirlpool over the phone that this might have been a recalled item, but they would send a technician to check. The technician said it was a build-up of grease and that I should not have used the rack and not to use the rack at all in the future. However, I do not use the microwave often enough to get a build-up of grease and it is cleaned thoroughly. This is a Whirlpool-manufactured product. Why would it be unsafe and why can I not ever use the rack again? If this was a hazard, why has it not been recalled?The technician removed the rack and sprayed a white substance on the support, and I was charged $138.03 for this and left with a partially, unusable appliance. I would like this to be replaced, so that I can use 100% of my microwave or be reimbursed for this expense. Please explain. Thank you.

Bought these Whirlpool Cabrio Platinum combo about three years ago, nothing but junk from the get go! Washer never gets clothes clean, towels always come out smelling mildew and sour no matter what liquid soap you use Tide, Gain, whatever same results. Plus always mold coming from inside tub and yes we use refresh weekly and wash it out on refresh setting. I’m so tired of our towels smelling sour but can’t afford to buy new washer and dryer living on fixed income. If I could these would be in the recycling yard now. From everything I’m reading all new H e machines are crap and energy efficient my foot. I wish for my old style washer and dryer. WHIRLPOOL YOU HAVE LOST A LONG TIME CUSTOMER!

Our fridge was delivered the 24th of Jan. We called on the 19th of June because the fridge stopped working. The 24th Capital Refrigeration came out and said he ordered the parts, they would likely be there on the on Fri. the 28th. On the 5th the parts werent in yet. On the 5th of July I called Whirlpool to find out whats going on and the parts were on backorder. They would expedite the parts. The parts came in the 12th. Our Whirlpool refrigerator was delivered on the 24 of Jan. It quit working on the 19th of June so we called Lowes. They hooked us up with Whirlpool. They sent a tech the 24th. He (Mike with Capital Refrigeration) left saying he ordered the parts and they would likely be in on that Friday the 28th. I call Lowes on Mon. the 1st. They hooked me up with Whirlpool and they said the parts were being shipped that day and should be to Capital Refrigeration on Fri. the 5th. I called on the 5th and now the parts are on backorder (they didnt know they didnt have the parts). So the parts came in on the 12th. Capital Refrigeration came out, installed all new circuit boards. That didnt work, still no fridge (he suggest replacing the fridge but Whirlpool says no). So he orders new parts. He comes out on the 17th and installed new parts (coils and stuff). It worked for 3 days and quit again, I lost my food again. I call Lowes again. They hook me up with Whirlpool. They say theyre sending a different company. On the 19th A1 Quality Appliance calls, set up appointment for 23rd. The come out and say they are ordering the parts on the 25th. They say that Whirlpool said parts would arrive Mon. the 29th. On the 30th A1 Quality said the parts arent in but they have us scheduled for Wed. the 31st. NO PARTS. I called whirlpool and now I find out again they dont even have the parts again (they dont know they dont have the parts). They are on backorder and in a week call them to see if they have found the parts yet.So at the end of a week (the 7th of Aug.) Whirlpool said to call and see if they found this part yet (maybe not). It will have been 7 weeks without a fridge that broke when in use less than 5 months. They have told us the parts would be here 3 times and then find out all these parts have been on backorder every time. The 1st repairman Mike at Capital Refrigeration advised to replace the unit but they are still dragging this out. They did send us $150 for the inconvenience (not for all the food we lost). It would appear it will be 2 months before we have a refrigerator again if we are lucky. Whirlpool is a very poor company that has misled us several times and are still doing so. We purchased their refrigerator, double stacked oven, microwave and dishwasher and are very sorry. They say they record the calls if there is any doubt about my facts.

We purchased a Duet from Lowes just a few months ago. Within 2 weeks we had an inoperable machine. After 2 phone calls a service technician came out and looked it over. He had to come back a total of three times to replace the motherboard. That worked for about six weeks and it died again. He came out again and replaced the motherboard again. Fast forward two months and the machine is once again inoperable. When plugged in, it makes an ominous growling sound but nothing else happens. The idiot who designed this thing has no common sense. Its programmed so that it will LOCK on any failure. Not only has every one of these episodes left us with a load of clothes in there getting moldy, you cant even get to the model number or serial numbers; both of which are only visible inside the rim of the machine.So adding insult to injury, your machine is broken, your clothes are in there getting ruined, and YOU CANT EVEN GET TO THE INFORMATION YOU NEED TO SET UP THE SERVICE CALL. If it had only happened once, Id laugh, but this is the third time and its not funny. We bought this machine because it said proudly made in USA. Next time, Ill support the Korean economy and buy a reliable, durable Samsung. The only positive I can offer is that the Whirlpool live chat person was able to set up the service call for me even though I cant get to the relevant data inside the machine. DONT BUY A WHIRLPOOL WASHER. Despite their legacy and US-feel-good associations, the sad truth is that they are poorly engineered and poorly manufactured.

My stove is great. The only thing I would change is one more big eye. Having two big eyes would really help. I also love the oven although I have to pay attention because it heats on the hot side. A cake will be done in 18 min instead of 20 or 25.

We purchased Model # WFG231LVQ from Appliance Connections. Its a 5 burner with oven. When my husband went to clean the stove door, the bottom handle fell off because the heat from the oven had melted it brittle. Weve had this stove less than 3 months. Then we see where the clips that hold the glass on the front door have melted. The plate that separates the burner from the oven has bowed and splintered the porcelain. And the oval griddle burner only puts out flames on one side. Whirlpool sends a repairman out. He states that they really make them cheap these days. Writes down the whole list of things wrong with it. Repairman calls us back and reports that Whirlpool only wants to replace the parts. Im afraid to use my oven. I want it replaced or my money back!

Whirlpool washing machine #WTW58ESVW1 - I bought this thinking Whirlpool was a good brand name. I was totally wrong. My machine is two years old and the auto sensor switch has quit working 6 times. One time it only did 6 loads of laundry. Another it only worked for 6 weeks. That time I replaced the switch myself to save money on a repairman. Ironically the switch is still under warranty but they will not replace it unless a serviceman comes to confirm that the switch is dead again. This is because 2 have already been returned to them. Obviously, there is a problem with the switch. The company will do nothing. They used the excuse that I did not purchase an extended warranty. This is merely an excuse. Do not purchase any Whirlpool products. You will be wasting your money and time having to end up going to go out to do laundry.

I have had a plumbing company work on my Whirlpool water heater three times in the last two months. On the third visit, he told me all the problems customers have had with Whirlpool water heaters. I decided to call Whirlpool for warranty purposes. The unit is three years old. I was told that it was the gas valve, and I was given a free one from Lowes. After installing the new valve, it still did not work properly. After troubleshooting with a technician, I was told it was the orifice. I have had to do all the labor myself, and I dont know how long this is going to go on. I have heard Whirlpool will continue to give you the runaround (from the plumbing company and Lowes salesmen) and will continue to give you the runaround and not replace the unit. They are wearing me down. I have been without hot water for three weeks with no end in sight. I am ready to give up and just buy another water heater but certainly not a Whirlpool.

We bought the Whirlpool top loader washer and the drum broke down and after several attempted fixes it was replaced by new one as we were being financed through a business. So here comes the new one - same exact washer. Not only did it not clean well (normal soiling) then it goes to ul which means not balanced... not because clothes arent but because the thing that balances - it went only after a yr!! It would also keep filling draining again to no drain leaving clothes SOPPING wet... So very disappointed to say the least. What a piece of junk this washer is!! Its going to the curb tonight and being replaced by GE - NO MORE WHIRLPOOL AGAIN !!

Washer is very mobile. Dryer does not dry. Refrigerator temp is never correct. After reading complaints, I firmly believe you know what the consequences of your products. I would never recommend Whirlpool again. I have used Whirlpool products since 1970 and always had good appliances. Your new products are worthless and you are spending more money on legal protection and lobbying than making a worthy product that actually cleans clothes and cools food. You are charging thousands of dollars for a worthless product and paying thousands of dollars for legal protection with warranties written to excuse your worthless product. Put your money on improving your products.

We bought our Terrorpool Whirlpool refrigerator in 2006. We have had problems with the ice dispenser, bad motor replacement, and now we have cracks all down the right inside wall. I had bought an extended warranty of four years at the time of purchase which covered the cost of the previous problems. But it has now expired, and I was told it would be my expense for repair. What happened to reliable appliances that our parents and grandparents had? What happened to the name Whirlpool? I will never buy a Whirlpool product again, not to mention the customer service (which I wont mention). If you have model # ED5PHEXRQ00, please write about any problems you have had and help someone else not make the same mistake.

My very expensive Whirlpool refrigerator thats three and a half years old broke down before Thanksgiving 2020. I am not able to get parts until after May 18th 2021. After calling numerous times and spending lots of time on hold I was told February 11th by Whirlpool that they had the parts in stock and they gave me a price for each part. Then they connected me to the parts department where they told me they dont have two of the 4 parts that I need. The price that they gave me for the same parts with a lot higher than what they told me at whirlpool. Whirlpool customer service was terrible its as if they dont give a damn. They just dont care.I cant believe its going to be 7 to 8 months to get parts for a three and a half year old refrigerator. I have fallen down my basement steps where I have a small very very old refrigerator twice carrying food up and down. Spreading mustard and sour cream all over my carpet my stairs my walls. Not to mention the fact that I have bruises all over my body. If I were you I would not buy a whirlpool. Its going to cost over $600 for the parts replacements that is if I can ever get them. Im going to have to break down and buy another refrigerator. Remember Whirlpool customer service is terrible and you can just forget about getting the parts.