I bought this washer thinking it would last me for a long time. And now it wont wring out my clothes and I just wanted to say I am disappointed in my Cabrio Washer.

I will never buy another Whirlpool again or recommend them to anyone, and discourage anyone from buying one. I bought a Cabrio washing machine just over 2 years ago and yesterday I received an F51 error code. The manual says that this code requires a technician to come a check for repairs. Well, before I do anything I google the problem, and lo and behold there are thousands of complaints about this issue with the Cabrio models. Some saying that what needed to be replaced were a control board ($280) and a rotor (unknown amount), not including the price of labor. Some said that Whirlpool knows about this problem and they covered the parts and repair. This didnt get my hopes up, but I called customer service and of course they said that there were no reported issues with the model and that what I found on the internet was probably an older model. Of course! The lady on the phone told me that they would not cover the costs and it would be anywhere from $300 to $500 depending on the route I wanted to take. That is a 1/3 to 1/2 the price I paid for the machine. This is ridiculous! I am tempted to just get rid of the washer and go with a better company that actually cares about their customers. This error code was definitely something they know is a big deal if there was nothing I could do about it other than call a technician. I paid almost $1000 for a machine that has barely lasted 2 years before I have to pay money to have it fixed. Not a company I would ever purchase anything from again!

I purchased a Whirlpool electric stove WFE540HOES 3 weeks ago from Best Buy. 2 Main complaints: Extended cooking time when using the oven. Food that should bake in 14 minutes was taking 25. Food that should bake in 30 minutes was taking 50, etc. The big issue was that the exterior of the stove was getting extremely HOT when using the oven. The area behind the handle and the storage drawer were so hot I had to use a towel to open it w/o getting burned. Thought it was a faulty stove so I exchanged it for the same model. Just got the replacement and its worse than the 1st one! The heat permeates from the bottom of the door and heats up the storage drawer below. The area behind the handle and the enamel edge of the stove get so hot. Its definitely a safety hazard if not fire hazard. Anyone else experience this??? Its going back!

Just purchased Whirlpool top load large capacity washing machine with no agitator at Lowe’s three months ago. I sit at the kitchen table in my freshly washed exercise clothes and smell body odor. There were six exercise items in the load and supposedly enough soap. The load washed for 45 minutes last evening. Yard work clothes washed yesterday are not clean. I had to remove grass from the bottom of the tub. When I iron my smocks for work, since I work with animals, I pick pet hair off of them as I iron. Judging from other reviews, this torture won’t last long, before I need to replace this piece of junk. My last washer lasted 20 years. If it didnt leak water, it would still be running. Thanks Whirlpool, I guess the joke is on me!

My Whirlpool refrigerator is more than a year old but have been complaining forever it seems. The serial # is 21142009, model WRT777REYWOO. All bottom cords etc. is out and 3 times I had people come out to fix and it never changed. The lettuce drawers freeze and in the freezer leaves ice cream pretty soft. I am so upset about this, and cannot afford a different one, no matter what brand because I paid around $1,000 for it and I am low income (my ss), 73, and disabled. But Whirlpool refrigerators are not worth buying if this is the standard policy to ignore their responsibility here. It leaks water from freezer to meat compartment, and I could go on but seems hopeless. My sister in Oregon had the same one and they took hers out finally so she could apply that amount to a different brand which has no problems.

Whirlpool Gold Microwave Hood Combo GH5184XPS4 purchased new on 12/2009. The plastic vent cracked where clip attached by factory installed screw. The vent fell off microwave on 10/2011. I spoke with Whirlpool customer service. It is out of warranty and recommended to buy new vent part ($40.00). The new vent broke once again on 12/2011, clip attachment location. Now, the plastic door handle is cracking. The customer service is sorry and recommends to buy replacement parts as long as they remain available. There are many reports of similar instances noted online. I live in a newly constructed condominium where multiple owners have had the same problems with their Whirlpool Gold Microwave Hood Combo GH5184XPS4.

I purchased a brand new refrigerator model # WRX735SDBM00 Ser # K51621170 on 30 June at Lowes. Paid about 1600.00. Within 5 days the ice maker was no longer functioning. I called the service department and a lengthy ordeal commenced of trying to repair. It is now 13 August 2015 and I have had over 10 visits from a technician and I still have no ice. I made a terrible mistake in not returning the appliance to the store within 30 days so now it has to go through the process which means that now I have to continue to wait until the technicians deem that this appliance is not repairable anymore before I can attempt to get a replacement.In the meantime, we have been inconvenienced, aggravated not to mention not be provided a product that works with no future date where I can get this appliance repaired. The local store management have been great to deal with and are trying but their hands are tied until the manufacturer determines they cant fix. In the meantime, the consumer is continuing to wait for the repair/replacement. No one seems to care or has there been any discussion of some compensation (not necessarily money) for the aggravation and inconvenience I have endured. Something is just not right. Suffice to say, never again will I buy a Whirlpool. HORRIBLE EXPERIENCE.

I purchased my new washing machine in September 2011. When I removed the clothes from the washer after the first wash, I noticed that there was soap on several of the items. I ran them through another rinse and spin cycle, and there was still soap on several items. In an effort to avoid this problem, I no longer use the soap dispenser tray, and use the bulky cycle to get more water in the tub. Like most of the others, the clothes are tangled and stretched from one side of the tub to the other. Also, it takes 1 hour and 36 minutes to run a complete cycle. The manager of Sears tells me, that because of government regulations, that in a few years, you will not be able to buy any other type of washer. I purchased this machine, because it was highly recommended by Consumers Report magazine. I filed a complaint with them eight days ago, but have not had a response.

2010 upright Whirlpool freezer - Door is totally bubbled in rust. Warranty Plan not covered for this. Whirlpool Corp Serv. Dept said they are sorry but it is not a functional problem. Cost of repairs on 3-yr-old freezer that cost $600.00 would be $732.62. This freezer was rated CR Best Buy in Sept 2009 which was why I purchased it. I paid $81.00 for repair tech from Whirlpool today who could do nothing either. Whirlpool knows that this has been a problem as consumers have complained about this rust in Google, some saying they will never buy a Whirlpool product again. Same here!

I bought this washer (model WTW7800XW) on 12/23/2010. Never happy with its performance from the beginning. Within the first 18 months, the lid hinge completely rusted and broke. The repairman stated that the hinges and glass lid would need to be replaced at a cost of over $400. We paid $899 for the washer. Instead of paying that much, not knowing if it would only last another 18 months, we removed both hinges and removed the lid manually to use the washer. After complaining to Whirlpool about the problem, they thanked me for the info so they could use it for the future. The latest problem to arise is the light inside the washer. The mount for the light was made of steel and has completely rusted away, so the light is just hanging inside the washer. Whirlpool needs to step up and resolve the issue with an extended warranty for these machines.

So, I have a house full of relatives from out of town staying over and as luck would have it, my Whirlpool water heater (model # BFG1F4033T3NOV) which I had installed 15 months ago, decided to stop working. The pilot light went out and would not stay lit no matter how long I held the red restart button. I called Whirlpool customer service and was informed straight away that their computer system was down and they wouldnt be able to order parts if I needed them (great start right?). I explained to the woman on the phone what my issue was and also told her that after searching online, Ive found that this is a common failure with these hot water heaters that Lowes sells where the thermal couple is defective and needs to be replaced. She began to inform me that before any parts was ordered (which she couldnt do because the computers were down), I would have to clean the vent openings on the bottom of the HW heater. No big deal. Then, Id have to have my gas line pressure verified by my gas company (what?). If both were found to be fine, Id have to confirm that my flue is at least three feet above my roof line before they would send me parts to repair my unit. This is about where I lost my mind.I run the RMA/Customer service department in my company and if anyone has issues with our products, we ship first and ask questions later. How can a company with known defective products give their customers the runaround and basically tell them that they are screwed until they can take off time from work for a gas co. to come to their home and will also have to have flue replaced before theyll warranty their product?! Whirlpool should be ashamed of themselves and Lowes should distance themselves from such a crappy company with substandard products and shoddy warranty practices. Ill never buy another Whirlpool product as long as I live and will warn anyone away from this company.

We purchased a Whirlpool Duet machine in September 2010. About a year ago, I started noticing tears and stains on clothing. Luckily, it was always on a washcloth or blanket, nothing special. Last week, it tore a 3-inch hole in my good jacket. I was not happy! My husband and I checked inside the drum and all around the seal. Neither of us found any rough edges. I thought if I called Whirlpool, they might have had a recall. They assured they had never heard of this problem. REALLY!!! Just look at all these e-mail complaints. Back to the old top loading - basic wash machine. Definitely not a Whirlpool!!!

I bought this piece of junk Whirlpool Cabrio washer two years ago and it’s been nothing but junk. Just like everyone else, this thing has never gotten my clothes clean no matter what I do. Anything with a drawstring or straps gets ripped up or stretched out. It’s loud and shakes, even though it’s leveled. Now, to top it off, it’s leaking water from the basket seal. I called Whirlpool and they couldnt give a damn. Since it’s out of warranty, it’s my problem, even though she said they know this machine has a lot of problems. So now Im stuck either fixing this thing or buying a new washer. Every appliance in my house is a Whirlpool and Ive had nothing but problems with several of them. I thought when I bought the brand it was a good brand and they stood behind their stuff. Boy, was I wrong! I will never buy Whirlpool again! They should recall this washer!

Whirlpool WRF 990SLAM00 - Im 62, I have owned, and my family has owned a number of refrigerators and never have had any problems. I have been used to my refrigerators and major appliances lasting 15 plus years without any problems. I mostly bought Maytag washers and GE kitchen appliances. I had trouble with a GE dishwasher, out of warranty, but GE was very nice about it and came out and fixed it at no charge, then replaced it for free when it failed again. (No new problems in 4 yrs.). Then I made the big mistake of going with Whirlpool products in my new house in Florida, where I live half the year. What a mistake. First there was the Cabrio washer. After 1 yr and a week, It would not go to the spin cycle. I called Whirlpool, they said, Sorry, out of warranty. I told them, I only live in this place for half the year, so I have hardly used the machine. The Whirlpool person said, Sorry out of warranty. I asked for a supervisor and they were worse than the first person. The attitude was screw you, you should have bought the extended warranty. I called a repairman who fixed it for 150 dollars. During the spin cycle it gets really loud, but at least it works. Then the refrigerator. I arrived back in FL and the 1.5 year old refrigerator was not cooling. I called Whirlpool and said I needed a repairman. They said, Out of warranty, you can buy an extended warranty for 345 dollars. I said, No, a refrigerator should not fail at 1.5 years, send a repair man. He was great, but said the unit had a Freon leak somewhere in the box that was un-repairable. He told me, You need a new refrigerator. I will now call Whirlpool and see what they will do for me, but I expect little based on my experience with the washer, and others comments above. I will go back to all GE products after this as at least they seem to stand behind their products. Oh, and since Whirlpool now owns Maytag, as Whirlpool owns them now. Sad.

I purchased a Whirlpool over the range microwave (model WMH3205XVQ) on 9/27/10 and have replaced the door now for the second time due to the plastic cracking. I also discovered today that the plastic has again cracked on the vent grill and the control panel. The door, vent grill, and control panel were all replaced on 8/19/2011, under warranty. It appears to me that Whirlpool has a manufacturing defect which they need to address with the consumers who have purchased these products.

My new washer quit working properly. It does not spin or wash properly.

I have a top-freezer model WRT5715MYW. This week will mark the 3rd time Ive had a service call to complain about food freezing in the refrigerator compartment. The last time the repairman told me I couldnt place food in the center of the refrigerator since that is where the cold air from the freezer compartment comes down into the refrigerator compartment. This time when I called to schedule the repair call, the woman at the appliance store where I purchased this told me she also has a Whirpool refrigerator and she cant place any food on the bottom shelf of the refrigerator due to freezing. So this 21 cu ft refrigerator has a lot less usable space than I was led to believe when I purchased it. I would not recommend this product due to this reason. Beware of that channel that comes down the center of the back of the refrigerator. It seems like a design flaw to me.

We built a new house less than 2 years ago that included maple hardwood floors and upgraded Whirlpool appliances. The ice maker jams frequently, fresh vegetables freeze despite raising the temperature to 45 degrees and 2 service calls that didnt fix this. The latest problem is the worst. Ice built up in the bottom of the refrigerator and leaked out destroying our solid maple flooring. They are coming out again to service the problem, but who is going to pay for our swollen cupped floors?

I have Whirlpool gas range, model # WFG361LVS1. The igniter went out after only one and a half years of light use (4-5 times a week). I did not buy the extended warranty, so part is not covered. I only asked that they send me the part for free. I talked to a supervisor at Whirlpool (Dave). He said I should have bought the extended warranty. He said he could not help me. He was also very rude. I will never purchase another Whirlpool product.

My husband and I have been loyal Whirlpool consumers for over thirty years. When it came time to purchase a new refrigerator, we purchased the GC3SHAXVY00 model. It was quite expensive but we decided to splurge. This was the worst mistake. Let me also state that we have had the refrigerator now for maybe 5 years. Within the first 6 months, the door that is the central operating system for the appliance went out. The appliance was still under warranty at that time, so Whirlpool ordered a new door. The technician replaced the door and left. However, within 15 minutes of the new door being replaced, the entire refrigerator began to shut down, not just the freezer. Fortunately, we had the techs cell and we called him and he came back and put the old door on until he could order another new door. That made three doors in the first 6 months of us owning the appliance. Then, the ice maker started freezing up. We were told just to defrost the ice maker once a month, that this was a problem the company was experiencing with this 500-dollar refrigerator. Then, the water line started freezing so we would have to leave the freezer door open for about half an hour every week to get the line to thaw so that we could get the water to come out of the dispenser. Now, the ice maker has quit completely. Are we going to call a whirlpool tech? NO, what for?This refrigerator has been a true lemon from day one. I have three more Whirlpool appliances that have broken down within 6 weeks of purchasing them. It was time to replace our appliances so we thought we would support our local economy by purchasing Whirlpool. To say the least, that will never happen again. I will be replacing all my appliances with LG from this day forward.

I have an oven that is just under two years old - a Whirlpool. After less than a year, the sensor went out and had to be replaced. After less than one more year, the same thing has happened. They covered the first one, but wont help with labor or parts on this one. There is no user error. Its just a cheaply constructed oven.

I have a smaller/apartment size fridge. As a 1 person household it is a perfect fit. Works well & wasnt expensive. I am a Foodie, having it so nothing is too warm/cold, all the temps are equal, is a big deal. And in 10 years no breakdowns.

I have a Whirlpool cabrio washer (Model: wtw6300 Serial Number: CT3573525) and I am very disappointed with it. The spin cycle is the worst--sounds like a jet engine and gives me the UL error message of unbalance load. The machine was purchased in 2007 but was kept indoors. At the beginning, I didnt care because I had warranty with BrandsMart. I had to call at least four times. But now, I bought the automatic control and it didnt work. For two days, I was trying to balance this machine but it is impossible since the beginning.I contacted customer service and they advised me to contact the repair service in my area to get a diagnostic analysis of the issue. Hello! I already know what the problem is after reading all these reviews! I cannot tell you how pissed off I am. I will never purchase anything Whirlpool. Two of the gas burners of my Whirlpool kitchen, after two years of use, are no longer working. I will definitely contact BBB as soon as possible. Come on, fellow complainants, let us continue to fight to get a possible recall soon! We all have the same problem because this is a manufacturing defect!

Our 2005 whirlpool duet washer steel drum and plastic tub broke. My husband diagnosed the problem and opted to fix it to save money. The parts are under warranty but you still pay labor and technician visit running up to $250-$300. The plastic tub was obtained only if we paid for it $100 and the steel drum they sent under warranty. The plastic tub has a hole with a black plug and sensor in it. There is a discrepancy in the measurement of the old tub and new tubs hole that is slightly larger, therefore when installed a steady stream of water leaks out. I now have 3 plastic tubs as that was their solution, to send more of the same that did not measure correctly. An investigation was done to determine they were the correct parts. As asked we had a whirlpool technician come to verify parts were correct and being installed correctly and the parts sent would not fix the machine due to the hole discrepancy. Many calls were made to whirlpool and they continue to give me the runaround. They now are not taking their technicians information. The technician has given the information to 3 sales reps in the new england area and made several phone calls to whirlpool and no one is willing to give us a solution.

The electronic panel on my 4 year old barely used wall oven went out when I used the self cleaning function for the first time. It is going to cost $400 to fix it and another $100 to replace the stainless steel sides. They will have to remove to get the oven out of the wall. The oven door is locked and cant be opened so of the wall will have to torn out as well. I called Whirlpool 3 times and have offered no assistance.

I had a Whirlpool washer for three years that I bought at Sears and it started making a noise. I called Sears repair and they said it was the bearings. Would cost 600.00 dollars. The machine is still running making a noise are there more in a machine. I will never buy a Whirlpool product. I just lost my husband and I cannot find the bill but I am calling Sears tomorrow.

Well, I read most of the complaints with the failures in the machine. I guess most of them didnt last long enough to rate their performance so here we go. I bought a Cabrio top loader, high-E washer a couple of years ago. This one had a different kind of agitator - it was just a couple of inches or so off the bottom. I specifically bought this to wash comforters and it seemed like it was good for that (rousing agreement from the salesperson). So after a couple of years of working with it, here are my observations:Pros: There are absolutely none!Cons: Okay, other than not having control over the settings (cannot override any of the preprogrammed wash settings), it simply doesnt get loads clean (yes, I use expensive HE detergent). Except for the bulky setting, there is never enough water to wash and rinse the loads properly. Next, it makes a mess of the clothes. At the end of the cycle, and this is true no matter what I wash or how large or small the load is or which cycle I pick - even light and slow spin, it just makes a tangled mess of the load. Stuff gets stuck inside of other stuff, wrapped around other stuff or are balled up. Never have I seen this type of issue. I constantly get the unbalanced load notice and have to manually redistribute the clothes most of the time.To address the too little water level, there are two options. I have discovered that the bulky setting has the highest water level, so I use that most of the time. From time to time (when I need different water temps or just want more water), I have developed a work-around by putting a Y adapter on the hot water inlet and a short hose. Once the washer starts the wash cycle, I stop it and add a bit of hot water to bring the level up enough to do a decent wash job - same for the rinse cycle. So much for Whirlpools water efficiency.Next, the hot isnt hot. Its barely lukewarm. So I turn the cold down to a trickle and I get a bit hotter water. It takes forever to rinse though. Its a good thing Im semi-retired. Next is the inflexible cycle/water selector. I have never had a washer I couldnt override to tell it what to do in unusual circumstances. Boy, what rocket scientist at Whirlpool dreamed that up!But above all, this just doesnt get loads clean. I have experimented with all the variables, load size, cycle selection, detergents, etc. Most of the time, I have to do two cycles with my loads and these are not unusual or extremely dirty loads. They are just normal, everyday laundry for an adult couple. Really, Whirlpool! Who was the conceptual designer on this? Thank goodness they werent working on the space shuttle or some disease research.Bottom line, I am so soured on the design and performance of this product that I will never buy another Whirlpool product, either brand name or generic (Sears). I just cant understand how a company would let something like this out the door.

The average life of a refrigerator is 11 years. We purchased a Whirlpool convertible refrigerator (Model EL7JWKLMS02, Serial # EWR1339731) on 6/12/04 from the Lowes here in Visalia, CA. The first delivered was DOA and Lowes delivered another. That should have been a warning sign. We have had several problems with the product, as early as 2006. All repairs went through Sierra Appliance & Franks Appliances.We are now in the market of another refrigerator to replace this one. We have had to have freon added now for the third time. Sierra Appliance was unable to find any leak, but each time, the freon was depleted. In addition to the health hazard of having freon leaking into the house, we have had the distinct displeasure of having to deal with food waste, etc. Because of the ongoing problems with this product, we are now facing the reality of purchasing another refrigerator to replace this Whirlpool product.Due to this, I feel it is difficult to consider another Whirlpool product and will question any product to ensure that it is not Whirlpool-related. If there is anything that Whirlpool or Lowes can do at this point, it would be appreciated. Thank you for reviewing this note of dissatisfaction. It appears that we will be shopping for a new refrigerator this weekend unless we hear from Whirlpool. In any event, I would like this recorded as a complaint from a former customer.

It knotted my clothes up and twisted them to the point that clothes are so badly out of shape, hems are pulled out and some clothing torn. We no longer use the washer. Also, a very bad film all over our clothing. I have just tonight contacted the Whirlpool company as I have made numerous complaints to the business where I bought it to no avail. The day after buying and using once, the store sent a repairman out and he said use it on delicate. I have done that with the same results. I bought my washer in December of 2011. I am hoping Whirlpool contacts me. If not, we can contact the state attorney generals office, Consumer Affairs and our main TV station to make complaints. I do not have photos as I did not know I would need them. I am giving Whirlpool a chance to respond in hopes that a remedy is available. Maybe as simple as replacing the agitation device.

Bought a higher end Gold Series French door refrigerator. Immediately the door would malfunction and the the piece that pops out to seal the gap between the 2 doors kept piping out when the door opened...They came out and replaced it which did nothing...The repairman said we have to open the door slowly...Give me a break...Have a older cheaper model that is almost the same and its always been flawless.Now in year 2...the whole system shuts down out of the blue and thaws everything then suddenly works for a few months...Repair guy says cant do anything if he doesnt see the problem...Just got back from long vacation...We turned off the ice maker and emptied...Returned home to damaged wood floors and a bin full of ice...System reset when it restarted and started making ice...2 years old and we have a Samsung on order and the Whirlpool is going in the trash...Weve had many whirlpool products and the defects are getting worse every year...Absolutely done with them!

Whirlpool’s customer service is one of the worst I have encountered. They consider a 6-7 year old $1500.00 range to be old! I said to her, “Wow, if the population was to throw their Whirlpool appliances into the landfills after 7 years, this would be quite a horrendous situation.” I think its disgusting for a company to build appliances with a shelf life of 6-7 years and with only a 1-year warranty! What a horrible brand! I will never buy another Whirlpool brand product ever again. You spend $1500.00 on a range oven and then around 5 to 7 years the control board blows out and costs another $500.00 to replace plus a service agents fee to remove and install.I asked the Whirlpool agent if I could get the control board discounted and she refused and said, “I am sorry, we are unable to help you.” Pathetic! Their cost on these boards is around $120.00 or so. I was told by an appliance service rep they could discount that $500.00 board even half and still make a decent profit. Do not ever buy Whirlpool. Go with other brands instead. Their customer service policies are horrible. Your hard-earned money will be buying an appliance with a 6 to 7-year shelf life before major repairs.

FRUSTRATION!!! It is unbelievable that even appliances have become DISPOSABLE! Where are the days of when our parents bought well made appliances that LASTED 20 years with NO problems??? There was satisfaction knowing that a purchase of an appliance was $$ well spent! These days it costs MORE to replace parts than IF you purchased a brand new machine! We purchased BRAND NEW Whirlpool Duet Sport Washer AND dryer in 2007. The washer has been repaired a total of 5 times and the dryer 3 times!!! IN A SPAN OF 10 YEARS! Are you serious?! With the $$ spent on warranties/ labor/ parts: WE could have purchased new appliances. What is WRONG with this picture? IT IS ALL about making money on REPLACING PARTS/WARRANTIES/LABOR!!! Forget the consumer that is spending THEIR hard earned money to buy the appliances initially. Short of going to a laundromat, the consumer needs to purchase a washer & dryer. So I guess it is a vicious cycle of REPAIRS/REPAIRS AND MORE REPAIRS!!!

Bought this washer NEW 4 yrs ago. Now sounds like a freight train in the house when in use. Whirlpool customer service is absolutely USELESS!!! They do not stand behind their product and refuse to acknowledge what is a common issue. PISS POOR and will NOT give me a number to a higher up. Absolute disgrace!!!UPDATED ON 10/28/2015: This is an update to my previous review. 1st, I contacted Whirlpool who was absolutely NO help whatsoever and the person I spoke to refused to put me through to higher ups on the food chain. I was wrong in my previous review when I stated that we purchased the washer & dryer 4 yrs ago. It was purchased in January 2012. Started making noise in 2014 and has progressively turned into the sound of a freight train. I also failed to mention the stench that comes from this machine. It has also got to the point where it quits with 10 minutes to go in every wash. Whirlpool did send out a Whirlpool certified technician, which they paid for, who stated this has been a common issue with these and other models of Whirlpool Cabrio wash machines. Says in his 3 yrs with the company he has seen and diagnosed over 30 machines with basically the same issues (bearings are SHOT) and Whirlpool refuses to accept any responsibility for the defective design and that, in his opinion, they shouldve never been released. He gave me an estimate of $257.13 to repair. We decided to go ahead with the repair and technician came out only to tell me that there has been a re-work in the design of the replacement parts as Whirlpool realized they were faulty. So I now have to wait for the NEW designed replacement parts to come in as they are back ordered. WTF does that mean??? Shouldnt there be a RE-CALL and shouldnt they accept responsibility for this??? This has been, without a doubt, the most disappointment weve had with any purchase of a NEW appliance or, anything else for that matter, in our lives. After reading through some of these same complaints Im wondering if this machine is nothing, but a money pit and whats going to go wrong next. We also purchased the Cabrio dryer at the same time and have had no issues with it as of this time, but I assure you, I wait with baited breath. Their customer service department is piss poor AT BEST!! Please, stay away from ALL Whirlpool appliances in the future.

I have recently bought a Whirlpool Cabrio washer/dryer combo and I wish I had read your reviews before doing so. I spend quite an amount of time washing, re washing, rinsing dark clothes to end up washing them by hand as the washer leaves unsightly white streaks on them. I have tried switching from hot water to cold, using very little detergent, buying clear detergent, then organic detergent, extra rinsing, etc. to no avail. Very frustrated and disappointed. I would gladly join any class action to stop Whirlpool selling these useless but expensive washers.

Bought a $2500.00 fridge in Dec. 2012. By July, we were dealing with our 4th repair. Customer service in warranty department is non-existent. They act like you are a bother and have no right to demand replacement. I sent an email. No response. I wrote a letter to Corporate. No response. Not until I made comments on Facebook. Then I get a call offering me an extended warranty (which I already had purchased) so they said they would give another year (total of 3). This was a few weeks ago. I still have yet to receive anything or hear anything. This morning, our fridge is on the fritz again. I am loathe to have to deal with them again, but have no choice. Its either deal with them or throw out the 8 month old unit and buy something else. I should not even have to consider that. Whirlpool is a huge company. I do not understand their reluctance to just replace a product that is obviously defective unless they have no confidence in a replacement unit. This is so frustrating and upsetting to me. I did my research. I thought I was getting a quality product from a quality company. What a disappointment.

Purchased side-by-side model fridge, and within a month, the ice-maker froze up. Within a year, the relay switch failed, and caused the compressor to fail. What a lemon. Also, the clear bins in the door of the fridge side, have all cracked. Whirlpool says it is a cosmetic issue, but I think it is hazard and a material processing failure during their manufacturing process. They obviously would not cover any cosmetic issues under the warranty.I was one of the lucky ones, at this point, as the repairs were under warranty (expensive compressor, only by one week), had to buy an extended warranty to cover me in the future. I was only out the cost of extended warranty, and a fridge full of food. Lucky me. Customer service is worthless for any issues. I dont think Ill buy another Whirlpool product again. Buyers beware.

We purchased all our appliances from Flecks - there were to be rebates. Also never received them. We have had our oven for 2 years - when I set the oven on 350 it will go up to 400 degrees & the temperature on the front of the stove is 350 then it will drop down to as low as 250 & the temperature will still say its still 350. I called the company - did will do nothing. Will cost me as much to fix it as to get a new one. This a Whirlpool oven.

Thirty minutes into running the oven self cleaning cycle for the first time, the middle pane of glass exploded! Weve had this range two years 4 months, and didnt buy the extended warranty. I contacted Whirlpool and they acted like this was the first theyve heard of this. I inquired on the class action law suit in New York from 2012, the year we bought ours, and they had no comment. They were willing to sell us an extended one year warranty and we pay for the service call for only $332! I declined and will never buy a Whirlpool product again.

Whirlpool Gold Series gas oven with Aqua Lift. Very unhappy with this oven. Cons: Aqua Lift technology doesnt work AT ALL (manual cleaning required); stove top hard to clean; 2 front gas burners are super burners which is fine for boiling water, but too hot for regular cooking. Would be better to have one super burner in the middle or back but two upfront is way too hot for regular cooking, even on lowest setting. Was going to use spray cleaner but cannot on convection ovens. In a bind what to do except scrub with Brillo. Anyone used Brillo?

Whirlpool Cabrio drain problem - I never had a washing machine that lets so much through to the drain pump. I replaced pump three times already. First of all, if you put anything with buttons in this machine, you can kiss it goodbye. This machine destroys clothes then lets buttons and coins and whatever through to destroy the fins on the discharge pump. When is the BBB going to do something about this consumer ripoff?

This Whirlpool, two door, refrigerator with ice maker & water, replaced a very poor quality 'LG' refrigerator which had stopped working. The company, "LG" was not interested in learning what the problem was but was only interested in making sure we understood the fee for an "LG" repair person to come out. The set fee was a minimal of $150.00 without any repairs. We decided to toss the LG and went to our local Home Depot and purchased our Whirlpool that same day, on sale! Our Whirlpool has been working great, without any problems and the fresh, filtered water is always refreshingly cool. We would very highly recommend Whirlpool! It seems their products always work very well!

I have owned the Whirlpool Cabrio for one year now. I cannot express enough what a complete waste of money this machine is. It literally does not wash clothes in even the most basic interpretation of washing. Clothes are almost in the same position as when they were put in the machine. Dont even bother with stain removal, it just rubs stains in and makes them worse. Seriously beware. Very expensive and not worth one dime. Im replacing with the Maytag. I should have stayed with in the first place. I will NEVER buy Whirlpool again. Must have skipped the entire product development on this one. I wouldnt even give it a one star review but the submission wouldnt process without it. WASTE OF $$ DO NOT BUY.

We purchased a new Whirlpool water heater April 2013 at Lowes and every 3-4 months the pilot would go out. My husband would simply re-light the heater, I guess he didnt think it was a big deal. However, in September 2014 the water heaters pilot went out and would not re-light, so I contacted Whirlpool about the warranty. It took 4 telephone calls (two of which involved a plumber, per Whirlpools request), and several days of cold showers for an authorization code to purchase a $8 part (thermo coupler). The hassles that Whirlpool put me through, no one should have to endure. Who ever heard of a technician telling you that they have to talk to the plumber, when you call them to explain a problem with your water heater, such as, the pilot will not stay lit and the plumber said it is the coupler (I couldnt remember the whole name of the part, but surely they should have understood what was wrong). Secondly, providing a plumber (unless youre married to one) to converse with them involves more money. Now I have a plumber at my house so I call Whirlpool and this technician insists that the plumber perform a test on thermo coupler to make sure that it was faulty before she gave the authorization for a new one. Yet again, when I called to Whirlpool with the plumber, while I was voicing my problems in resolving the issue of my water heater with this technician, and she just hung-up on me. So as not to be defeated and having already invested in the expense of the plumber, I called Whirlpool again and requested a manager. The technician asked if she could help and I informed her of my previous encounters. She apologized and took my information to have a manager to call me later; however, she did give me the authorization code for the thermo coupler without delay. When I went to purchase the part, I didnt have the old part (as trade; the plumber hadnt removed it), so I paid for it out-of pocket, to return the old part later.

We got a deal on our stove/dishwasher combination, establishing a payment plan upon purchase. And as a bonus, when you have a brand name appliance like Whirlpool, that made us more secure with the purchase.

Without a doubt, the worst washing machine Ive ever owned. After 15 years, my trusty old Maytag finally quit, so we searched around and ended up purchasing the Whirlpool Cabrio Platinum 3 years ago. In that time, the hinge on the lid broke, and now it makes a deafening noise when spinning. We called a repairman and he said the bearings were bad and needed to be replaced... Total cost $275 plus $50 for fixing the lid. When we told the repairman that it was only 3 years old he couldnt believe it! We decided against fixing it because from the start it never got the clothes as clean as we were used to, and without the agitator post in the middle, which was a big selling point by the salesperson who sold it to us, the washer continually stops with an Uneven Load message. Large load, small load, it doesnt matter. You cant do a load of any size without the load becoming uneven. We are now searching for a new washer, and although I dont know what well buy, I can guarantee it wont be a Whirlpool.

Have to keep coins collecting in pump and ruins pump or starts leaking. I feel there is another way it could be solved. I spent enough for this washer. Now I fix that. Now it leaks on discharge hose. Hard to stop it. Like old washer worked lot better all round. Never had that trouble. 4yrs old 1,200.00 plus cost sending somebody out to fix it. Crazy! This happen more than one time with this machine. Thank you.

Purchased the matching set. Have had four years and need my second service on the machine for issues. It is a top loader and does a good job but the tub is very deep and not made for short people with a few delicate items cuz they are hard to retrieve. I have to use tongs to get them out.

WE had a Kenmore dishwasher and it never got the food off without scrubbing the dishes first. We decided to get a new dishwasher after being very frustrated. We purchased a Whirlpool and noticed a difference instantly. It was quiet, got the dishes completely clean, (no pre-washing like before) and was overall a better fit for our family.

I purchased a washer 6 months ago and it was starting by itself so I called to get a technician out and it took them 3 days to tell me that they did not service in our area. Long story short I was out of a washer for 2 weeks talking back & forth with Whirlpool which was absolutely a nightmare. Kept me on hold forever and hung up on me several times so they didnt have to deal with the situation. Absolutely no customer service at all. When it came down to it they were going to issue me a new washing machine and I had to go to the store to get it and when I got to the store they told me I had a $415.00 credit to spend. Thats less than what I had paid for the washing machine and then I am having to spend an extra $200.00 out of pocket to get another washing machine.My warning to you is not to purchase any Whirlpool appliances unless you want to go thru pure hell. These people do not care about anyone after the product is sold. Their customer service sucks, their appliances suck and Whirlpool just sucks all the way around!! Worst experience I have ever had and I hope they never sell another appliance again!!

In August of 2013 the lid on my Whirlpool Cabrio, model #WTW7800XW0 simply fell apart. This washer was purchased from Lowe’s in Live Oak, Florida on August 23, 2010. Lowe’s put me in contact with the authorized repair service, A&E Factory Service. The A&E technician arrived and told me the hinges were the cause of the lid breaking apart. He ordered a new lid and new hinges. When the lid and hinges were delivered the technician came back to my home and looked at the hinges again and said they didnt look that bad so he didnt bother even opening the box with the new hinges. He just put the new lid on and said I shouldnt have any further problem. The total cost of the new lid, hinges and service call amounted to $385.50. Well, here it is - not even a year later and the same problem is back with me. Yesterday (July 23, 2014) I was doing a load of laundry. When the load was complete and the lid lock turned off - the lid actually sprung upward and now the lid wont close. It seems that Whirlpool is fully aware they either have a design flaw of defective lids and they are gouging the customers for their errors. The Cabrio model is supposed to be top of the line - certainly not a cheap machine. I was, at least, happy with the performance of this machine cleaning my clothes properly but this lid problem is ridiculous. I do not plan to purchase any Whirlpool products in the future if they do not make things right by myself and hundreds of others with this same problem.

This machine cannot handle washing jeans, towels, blankets, pillows or anything bulky or very small loads. The load becomes ul unbalanced almost every time I try to wash a load. It has never gotten things very clean.

From the day I bought the refrigerator the icemaker has not worked. I have had a estimation of service calls (8) and nobody seems to be able to fix it. Whirlpool mailed me a new icemaker and still the exact problem; water and ice works but the unit still will not cube or crush ice; which by the way is the reason I bought a new refrigerator. My thoughts are I bought a lemon and the entire fridge needs to be replaced.

My model - GB9FHDXWD06 - is one of only a very few that fits our space. However, it has failed three times in 5 years: 1) A faulty defrost drain tube that was replaced under warranty, 2) A jammed vent flap that caused the freezer to fail, and 3) a burned-out control panel (an expensive repair). It is also annoyingly noisy and middling at energy efficiency. The coils are in a very narrow space below the refrigerator, which makes them a bear to clean. And, the plastic front plate that must be removed for cleaning breaks far too easily.On the good side, it is a bottom freezer model (which is far better for convenience), the space-wasting ice maker was very easy to remove, the glass shelves, removable baskets, and drawers are easy to clean, and the auto-defrost works very well (after the recall update, number one, above). Temperature uniformity is good and the freezer maintains below 0° very well. Overall, it is a good looking appliance with mediocre efficiency and poor reliability. Not recommended.

Whirlpool cabrio wtw7800xwo - During the 12th month of the use of this washer, the lid broke. I called Whirlpool to schedule a repair on it. I got someone here to repair it, and it was 7 days over the 1 year warranty. I don’t think this is fair when they sent the repair guy out too late when I scheduled this right before the 1 year was up. I came about looking this up online, and I find I’m not the only one with a 1 year lid. My next washer will be a 1980s built to last. This was the worst $1,100 I ever spent. I had to choose 1 star. Wish it had a choice of - ★★★★★.

My $1800 French door refrigerator is only 20 months old and the ice maker has quit working. They sent out a repair person 5 times and replaced parts three of those times. Now they are saying it is unrepairable and are refunding my contract fee of $345 and leaving me with a broken ice maker. When the problem started it was making ice just not dumping it. Now it doesnt even get water. Throughout this all, two months, I have had to constantly call them to find out our next move. They say someone will call me in 2-3 days but they never do. One of The last people I talked to said, Well you can still keep food in it. I dont feel that is reasonable considering I bought a refrigerator with the ice maker in it. I finally called Whirlpool corporate instead of the service contract people to see if anything could be done and was told someone would call me back in 2-3 business days. Well its been a week and big surprise - have not heard from anyone. It is looking like we will have to purchase yet another refrigerator in less than two years. The service people I talked to were rude and really didnt seem to want to help at all. I believed when I purchased this Whirlpool product that they were a reputable company. Sorry to say that is not the case at all. I dont know if the refrigerator is really unrepairable or if they just gave up trying to find the issue. Seems hard to believe a basically new appliance cant be repaired.

Purchased this washer 7 months ago. We are a family of 5 with A LOT OF LAUNDRY!!! I adequately researched a machine that could do large loads of laundry, WELL. I read at least 100 reviews and went forth. (Note to self that anyone giving this machine a decent rating, is a DIRTY, SMELLY, FILTHY LINEN WEARING FOOL who doesnt take much pride in their clothing cleanliness.) I proceeded onward and after paying A LOT OF MONEY for this 4.8 Whirlpool Cabrio Washer, I found out within the first two days of owning it, that IT IS GARBAGE! Regardless of the 4.8 drum size, you can only fill it less than 1/4 of the way with clothes, to even hope they will be touched by water. My clothes come out DETERGENT STAINED & DRY! Insanity... A washer that doesnt wet the clothes!!! We have had 4 repairmen come out within this time, because I am fed up! I have been physically shown and told now, by all 4 guys, that the washer will not fill more than 9 inches with water. They advised me to fill Home Depot buckets and throw them into the drum. THIS IS WHAT I DO, TO SATISFY THAT I AM WETTING MY LAUNDRY - PURE CRAZINESS! The repairmen told me to set all loads to bulky sheets + extra rinse + highest soil. This is a 1 hour, 26 minute initial setting. Note that my adding water messes up the computer readings and it will reset throughout the washing cycle multiple times. Even with all of this... the machine still doesnt wet the clothes!! The top and center of the load is BONE DRY! This machine will not wash sheets, blankets or comforters, either. Dont waste your time trying!!! Dont be fooled by the drum size. Your great grandmothers 1930s 1.6 cu ft washer washed more clothes in any given load. #1 My water bill is through the roof. #2 The washer constantly resets and runs on any single load for over 2.5 hours AND #3 MY LAUNDRY PILES HIGHER AND HIGHER, as you cannot put more than a smattering of clothes in the machine, at any given time! GARBAGE, GARBAGE and MORE GARBAGE!!! I would be better served to find a stream and a flat rock and start doing my laundry colonial day style! I am done... Finally had enough of this insanity! RETURNED THE MACHINE THIS MORNING!!!

I have had this Whirlpool Cabrio washer for 4 years. I had to rebuild the drive unit once and now the control board is bad. If I didnt do my own repairs I would have spent well over the cost of the washer in the 4 years I have owned it. This is the worst washer on the market. Not to mention Whirlpool support will not work with you at all. DO NOT BUY THIS PRODUCT.

Both the washer and dryer make terrible screeching noise. The dryer only dries on time drying. The store I bought them from have been here over 7 times too fix them. They still are not fixed. Just a terrible experience with this set from day one, load one.

Whirlpool model WRF560SMYB04 - We purchased this model Whirlpool in Dec 2015 after having a refrigerator for 18 years with no problems. We started having cooling issues in late 2017 and finally an intolerable fan noise in April 2018. Researched it and purchased a fan. Opened up the freezer panel and found that the unit was completely frosted up to the point where ice had formed around the freezer fan and was hitting the blades. Contacted a repairman who came out and called in the issue to the Whirlpool tech line. He was told that he should check continuity on a couple of wires. If these checked out, the problem was the user interface board at the top of the refrigerator. We purchased a new board for about $100 and installed same. No change. I was now $250 into repairs and no further. We became aware of Whirlpool Service Pointer W10875533A which described conditions that we were experiencing. The issue was a coil thermistor that would corrode (apparently within 2 years) and would not provide accurate signals. Whirlpool also issued an instruction sheet W10902213 Rev A describing how to relocate the thermistor and protect it with foil and tape. My repairman came out, confirmed the thermistor ($54) was bad, replaced same following the Instruction Sheet. We were now out over $300 on a $1000 refrigerator purchased 2 years earlier.Whirlpool issued the Service Pointer (not to consumers, but to repair shops) in Sept 2016 (within our warranty period). We received no notifications from Whirlpool of the defective design. Nor did we receive a recall notice. Moreover, Whirlpool tech group must have known about this issue, but instructed my repairman to replace the interface board. Whirlpool knows they have a defective product out there but are doing nothing to inform the consumer or stepping up to correct the problem. We have contacted Whirlpool to recover our expenses...will let you all know how that goes. Anybody interested in pursuing a class action?

Cabrio washer bought 5 or 6 years ago. Started a whining noise when spinning, so loud we close the washroom door to hear the TV. Called service, they immediately knew that the main bearing was going out & quoted the two parts needed to fix THAT COSTS MORE THAN THE MACHINE DID NEW! Labor was not included. Was also told that it will eventually start leaking. Piece of junk. What happened to simple washers that did a good job washing in half the time that lasted 15 to 20 years???

Ive had it with Whirlpool products. I am now getting rid of my third Whirlpool microwave in just eight years. Every one of them had the same exact problem and Whirlpool continues to deny there is a manufacturing defect. Each of them developed a hairline crack extending through the bottom screw of the door handle to the glass on one side and the outside door frame on the other. They will do nothing about it and claim it is just a coincidence. No more Whirlpool ever!

Bought this washer two years ago. First experience was when a load of towels became wrapped around the agitator. Called in service tech who told me to load the bin with the cloths pressed against the bin wall away from agitator, as if the cloths/towels would stay away from agitator. Two years later, Im ready to the machine to the street. Forget sheets and bedding. The agitator wraps them so tight that I almost rip the cloths/sheets to unravel. I had to wash a pair of work pants that were soiled with mud three times and there was still a stain. I will NEVER EVER buy another Whirlpool product.

These are the worst washer and dryer I have had. I had them for 5 yr and have had repairman at my home 14 times. They still are not fixed. The dryer is so loud you cant hear the TV. Washer squeaks, gets off balance.

We purchased the Whirlpool Cabrio washing machine around January 2006, and from the start weve had nothing but problems with this appliance. Within the first year, water was leaking under the washer which was coming from a crack in the plastic housing of the water pump. I replaced the pump myself to save on labor. No big deal. The very next year, I started getting the F51 code and there was no way for me to get around calling a service company to have it repaired. $350 and one circuit board later, it was repaired. It remained working without fail until recently when it began giving the same F51 code. Let me guess, another $350 for better repair? I have to assume that the new circuit board that was installed wasnt any better than the original one that was replaced. I wouldnt put another $1 into this hunk of junk and Whirlpool should be ashamed to have this product on the market. I will never buy another Whirlpool product.

I have the 4.3 cu. ft. washer. This washer worked OK, but the lid lock does fail after about one year if the washer is in an environment where moisture may be present.I noticed the lid lock not working all the time about two months before the warranty expired. If this happens, call the warranty department immediately. After checking the ground wire and resetting the washer power over and over again, the lid lock finally stopped working completely. Here is how to fix it:There are two screws on the back of the top portion of the washer. Unscrew them from the silver straps. The washer lid will now push forward and up and off. Prop it up with a stick.Unscrew the two screws on the lid lock and start taking it apart (after reading this entire review). Be careful not to lose any parts and be sure to know where everything goes for re-assembly. Take pictures if necessary. Take the lid lock completely apart including any small pieces.The plastic slide needs to be cleaned. It has a spring that may fall when you pull it apart.The metal contact points inside the lid lock mechanism need to be cleaned. Be extremely careful when pulling the red cover off of the housing assembly. Pull the four metal contact points completely out of the plastic assembly. Be real careful with the black plastic slide piece, the metal rocker switch and the switch actuating motor. Use a small file and rubbing alcohol to clean off any green or white corrosion. Make sure to check all contact points.Re-assemble and you will immediately notice the lock switch working better. Re-install onto the machine. Re-install the upper portion of the washer. Start your laundry. Repeat after one year or when the lid lock becomes faulty again. These points should have been made out of a less corrosive material. Poor craftsmanship. Would not recommend.

From the very beginning the washing machine did not clean the load. It doesnt even get the load completely wet. The best you can hope for is to utilize lots of fabric softeners to at the least make your clothes smell clean because they surely wont be. Dont even get me started on the load lock feature because it serves no purpose other than to drive you batty. When your 15 year old son offers to give you money to buy a new washer after owning the one you just bought there is nothing I could say more profound than that. How Whirlpool stays in business befuddles the mind.

We purchase a Whirlpool washer model # WTW5000DWI, SERIAL #C842 43102 ON 10/30/2019 and it has been nothing but a disappointment. We are senior citizens living on a very limit income with several health problems, and cannot go to a washeteria to wash our clothes. We had a washer that lasted over 19 years and when the motor failed I figured it was more practical to purchase a new washer versus repairing this old one. We had a very reputable Whirlpool dealer here and was very helpful and recommended this washer and the price was in our budget! Was that a big mistake, it does not clean the clothes, does not rinse the clothes with using the 2 rinse cycle and still, does not rinse a load of sheets. I bought a large capacity washer so we could wash 2 sheets at a time. Wrong! You cannot get more than a couple inch of water on the Deepwater cycle, so its like washing clothes on a riverbank on rocks, it rubs clothes together. On my wifes good clothes it will cause little balls of fabrics on them, clothes does not smell clean, and if its real dirty clothes, it will not clean or take the stains out. Its water efficient alright, it does not use any water!Its for sale, and I have talked to a lawyer. Whirlpool customer service was no help at all/All they want was to send a dealer to check it out, the only problem if there is nothing wrong with it that will cost me min. of $125.00. Warranty will cover a manufacturing defect, not a design problem which is what this is. I will just go to small claims courts and get my money back and be done with Whirlpool, hell they dont care! I would buy any washer that is cheaper and has an agitator, without a water efficient features and is top loaded model. It does not pay in this world where large manufacturing companies dont care.

We purchased our unit (Microwave Hood Combination #WMH53520AH-1) in Fall of 2013 and within a year we noticed there were occasionally problems with the sensors; occasionally when you would open the door the lights would flicker and even rarer still, they wouldnt turn on at all. Id close and re-open the door several times to try to get it to register, because if it doesnt you are unable to heat anything in it. The sensor issue increased with the passage of time, but because it was outside of the 1 year warranty, Whirlpool refused to do anything about it, instead advising that I pay $70-140 for a service professional to come out and inspect it. The biggest problem with the sensor issue in this unit is that normally, if you open the door mid-heating cycle, the microwave will automatically turn off but once I opened the door AND IT CONTINUED TO EMIT MICROWAVES - the cycle stayed on!!!Needless to say, on the occasion that the microwave is actually working and we are heating something up in it, we NEVER open the door mid cycle and instead hit the cancel button, which blessedly works. You would think Whirlpool would care about their reputation for making high-quality electrical products. A flaw in the construction or design of a product can appear if quality of materials is poor and the problem can be exacerbated over time. Which is why I assume the warranty is only for one year. High Quality Products and Good Customer Service are such rare things these days. For our next microwave (which I imagine well need soon) I think well forego Whirlpool and go with a different company.

This washer has no agitator. Drum will shake back and forth while load of clothes will stay in the same place sliding towards the opposite direction of the movement for 20 minutes. Clothes are not turning, no going up or down, just staying still and not getting washed as expected. Baseball cap and construction worker jeans didn’t washed as it should have been.

When doing any cooking on this range, there are ALWAYS brown or black marks on the white enamel. When I try to clean it using the methods recommended by Whirlpool, they will not come off and the top looks terrible. Using stronger things to clean it removes the finish. They state its not covered under warranty - I will not ever buy Whirlpool again... EVER! Buyer beware! Model #wfg510s0aw2.

I bought a top of the line Whirlpool dryer that cost me over $1,000. Havent had it for a month and it requires a service call. Have to wait two weeks for service! Totally unacceptable. The dryer is JUNK and now I am stuck with it. Horrible company. Bought from Home Depot.

I Purchased a Whirlpool ceramic top self-cleaning oven & side-by-side refrigerator from Sears. I just want to share my experience. I do not have the exact year I purchased them. Too bad I was not aware of this site but after a year with the refrigerator I knew I would not buy another side-by-side and not a Whirlpool. The refrigerator motor runs too loud, the ice maker was forever stopping even during the summer. If you cleared the ice jams it would not reset for hours. The ice maker was replaced under warranty but it still jams; however now when you clear the ice from the trays it produces ice quickly.The temperature in the oven seems to be off now. I purchased a oven thermometer and to verify the temp and they are never the same. But my major concern now is the self cleaning feature. The front door is Yellow and unsightly from the self cleaning cycle. As I sit here typing, I hope the oven does not start a fire it is very hot. This is the last time I intend to use the self cleaning cycle again because I feel it should not be this hot. The ceramic top is hot enough to burn if you touch it. Strangely I checked the oven storage drawer and metal pans in them were okay. Cabinets beside the oven were just a little warm. But This customer will not purchase Whirlpool again.

I purchased a Whirlpool refrigerator in 2012 and now it does not work and Whirlpool says a 1300.00 refrigerator only has a one year warranty. Please do not purchase a Whirlpool brand because they do not live up to their brand name.

I bought a Whirlpool Cabrio Platinum washer 2 years ago and it is by far the worst washer I have ever owned. Its a water saving device with extremely long cycles. The clothes dont get wet enough, dont come out clean and they do not smell fresh. I have to put them through 3 rinse cycles and often times have to re-wash my clothing. The cycles are very long, using more electricity, and it takes me 3 times as long to get my weekly laundry done. My clothing comes out more wrinkled and twisted causing longer time ironing. My old agitator style washer did a superior job compared to this piece of junk. I dont like the automatic locking lid, nor do I like the machine choosing the spin cycle for me. There isnt even a soak cycle. If I want to soak my things I have to do it in the sink and then drag them to the washer to rinse and spin them.I spend a fortune on laundry additives in order to get my clothing clean and then they arent as clean as with my old washer. I now dread doing laundry and every time I look at the washer I feel like taking it to the dump! There isnt anything I like about this machine and I wouldnt recommend it to anyone. It is a piece of crap. This is 2016 and they havent learned how to make a good working washing machine. When I move, I will be celebrating leaving it here! I will never, ever buy a product made by them again.

I am concerned that Whirlpool microwaves installed over the stove have extremely faulty doors. I have two homes in which I have Whirlpool microwaves, and both have huge cracks in the door and small pieces inside the doors beginning to fall out. It deeply concerns me that it will cost more to replace the doors than to replace the microwaves. I have always believed in Whirlpool appliances but now feel that I will have to change brands. My question is “What in the world is wrong with your doors that they crack so easily and the company holds no responsibility with such faulty work?” I would simply think that this was just a faulty door on my microwave, but I have two that are cracked! This definitely means you have a faulty product.

I bought a Whirlpool washing machine last year. Exactly after one year the bearing problem and noise starts from it. So I do not recommend this machine to anybody because of this bad experience and also high service cost.

This stove was in my house when I bought it. It has a glass top on it with marks for each type of burner below. There are a couple of different size burners which makes it very useful. The only problem is with the glass top feature. It gets marked easily even when you try to be careful and many of the marks will not come off with anything I have used. The marks are so prevalent that I would never buy another one.

What can I say. Pretty much a generic refrigerator that is manufactured and sold under various brand names. Nothing special. Keeps food cold. Ice maker takes too much freezer space but thats typical. Interior LED lights failed after a few months. Flicker sometimes. Out other times. Internet research finds this to be a common problem. Zero quality in Whirlpool appliances. I bought four Whirlpool kitchen appliances and ALL have had problems. The only way to own them is with a 5 year extended warranty.

After owning the highly recommended Cabrio for only 2 years, I was told it would cost $300 for the motherboard!! I have always used Whirlpool but this machine is terrible. Water saving is not an option when washing clothes. Unless I use the bulky cycle, my clothes come out dry and smell dirty.

Purchased a Whirlpool double oven (WGE745COFH) in September 2018. It is now May 2019. After 5 service technicians verified the erratic temperature fluctuations in the ovens, Whirlpool insists that a +25 degree to -25 degree fluctuation in a heating cycle is normal. The motherboard was changed 3 times, and the sensors were changed 3 times, including hard-wiring the last set of sensors. I called Whirlpool and customer service says that is normal. Ever tried baking at a 350 degree setting that fluctuates from 375 degrees down to 312 degrees while trying to maintain a 350 degree setting? I understand there has to be some fluctuation, but either it took a lot of extra time or burned my food consistently. Ridiculous.So, with the help of wonderful people at Lowes (where I purchased the double oven) Whirlpool is refunding my money and Lowes has taken back the slide-in double oven. In my quest to replace it, multiple appliance sellers have told me that all the new ovens having motherboards and sensors have big fluctuations in the oven heating cycles. I find that unacceptable. My husband and other family members have worked daily in an industry where temperatures were critical. They used ovens that could maintain temperature within 5 degrees of set temperature with analog controls. The home consumers are being ripped off with cheap, sub-standard parts making throw away appliances and getting away with it. What do I buy? Havent figured that out yet, but have purchased a countertop toaster oven that bakes beautifully.

Whirlpool 70328 215 IMFRESH ROY 5S purchased on 14th Feb. 2016. It has stopped cooling on 11th April 2016. Complaint lodged on 12 April. No serviceman attended and not connecting toll-free number. Never, never go for a Whirlpool refrigerator.

I purchased a Cabrio washer and dryer in 2011 and sold it in 2012 for half the price. I was tired of my clothes not being cleaned. My husband and I work in an office environment so our clothes do not get real dirty. On the other hand, we do work around the house and garden. When I put black pants in the washer, then take them out, they look clean because the mud is still wet. When I take them out of the dryer, it is dry mud. I called the company and they said get someone in our area to come in and see if anything is wrong. Yep, they came in, charged me $150 and said that nothing is wrong; they cannot find one thing wrong. I used the washer for about another 6 months and thought, This is crazy! My towels, bedding, nothing is clean. I then sold it for half price and I am now using a totally different brand. I will never purchase a Whirlpool again!

I purchased a Whirlpool WFW9050XW washer in Aug 2011. I have had nothing but problems. Sears sent repair tech 2x; it would work for a couple months and stop. Whirlpool has sent new motor, tub, switches, etc. I feel I bought a lemon and I want Whirlpool to replace the machine.

We purchased our fridge February 2017. It stopped working September 2018. It wasn’t staying cold. Under manufacturers warranty a repairman was sent out to assess the problem. They had to order the part that went bad. A week later the came back and “fixed” it. Total time missed at work 1 day. It stopped working again April 2019. It wasn’t staying cold. Under our Lowe’s extended protection plan a different repairman was sent out to assess the problem. They had to order the part. A week later they came back and “fixed” it. Total time missed at work 1.5 days. Yesterday (July 2019) we noticed it wasn’t cold AGAIN. Called Lowe’s and was told they could call it a Lemon and replaced until the 4th time it needed repaired. They would need to send out a repairman and assess the issue and make a repair. Our 3 yr extended protection plan expires February 2020. So we’re probably not going to make it Lemon status within the warranty. The fridge is French Door Bottom Mount model. Do NOT buy this refrigerator!

Every washer Ive ever had has just a spin. Why dont these new washers? If the washer is un-level why would you add more water? They need a spin cycle to drain the water out of it. No more rinse and spin just a spin. Very aggravated.

I have the Cabrio model WTW6400SW2. I have had it for 5 1/2 years and have been happy with it up until several months ago. The F1 would come up when the machine would lock and just start to fill. I could pause it and start it again, and it might do this 1 to 3 times. It would also do it on the rinse cycle. I have been using it because I did not want a repair bill right now. The machine was also starting to make noise when it was spinning. Well, I just happened to break my dryer yesterday so I thought I would get the washer fixed also. Well, the repairman said that the controller would cost $200 for the part, and then he said the pump roller and bearings were going. By the time you add on labor, he said, “You might want to buy a new one.” He told me that Whirlpool has completely changed the washer now because of all the problems with them. He told me to look it up on the computer, and maybe there would be a class action suit. After reading some of the reviews, I will not buy another Whirlpool again.

I bought a Cabrio washer. Since we bought it, I have had to fix it. The machine is a piece of junk. It looks nice though. After 5 technicians later, our piece of junk is still having problems. We are a poor family with 3 kids who struggle to make ends meet. I feel that this company has taken advantage of the people who put their trust in the so called American company Whirlpool.

We purchased a Whirlpool side by side refrigerator from a local appliance store in December, 2018. We immediately noticed a loud humming noise coming from the refrigerator when the motor is running, which is a lot. We can hear it from our bedroom on the other side of the house. The store replaced the motor and the fan, but the constant irritating humming continues. The store called Whirlpool for advice, and were told that side by side refrigerators are louder. They also said that since it is working there is nothing they can do. We had a Kenmore side by side in the very same spot for over eight years. Never noticed when it was running. We will never buy another Whirlpool product again!

Very loud when in spin cycle, tub leaking out of the bottom. Bearing is shot. Only lasted about 3 years. It also knots up the laundry, does not remove dirt from soiled clothing.

This was the first new appliance that I had actually ever had and I purchased it in October of 2010. After four months, it started make a grinding sound. I called Whirlpool and the repair man replaced the motor. Approximately four months after that, the lid got stuck and the machine would not respond. Same routine as before, but this time the transmission was replaced. While the machine was apart, I noticed the white insulating panel from the bottom was brown in a spot and looked as if it had gotten hot. A month before the 1 year warranty expired, the washer started making an intermittent grinding sound nearly identical to the sound made when the motor went out. This time a different service company was sent out my Whirlpool and the said that nothing was wrong. Now, the machine is out of warranty and has stopped cleaning close and during the spin cycle the you can hear water running into the machine constantly. Last months water bill shows a 40% increase in water consumption when nothing has changed to incur a larger bill. Seeing all these comments makes me wonder why the heck nothing is being done to force recalls on such poor products. Consumers should be treated with a lot more respect than this. I will never recommend a Whirlpool product to anyone I meet. In fact, I will strongly discourage anyone who is contemplating buying a Whirlpool washer machine.

I have been using this brand for many years. My first washer lasted for 30 years..so I will stick with what I know is reliable. It is a great machine. Very simple. I dont need anything fancy. 3 different cycles to choose from.

My agitator-free washer began tearing small holes in my clothing and sheets about one year after purchase. I contacted Whirlpool and they sent out a service person, who ran a diagnostic test on the washer and said it was fine and I should learn how to wash clothes and load the washer, etc. The barrel of this washer has little holes and I believe that when it spins the clothing, some pieces may stick in one of those holes causing tearing. The service person also told me that my clothes were old. I guess that means this washer is not for washing old clothing. The tears in my clothing are in places that are very unlikely to tear, like the back of my jeans behind the calf of a leg, about half way up from the ankle. There are holes in my tee shirts at the bottom of the back. Even if I were a smoker, which I am not, I would not likely burn holes in those areas. Whirlpool obviously does not want to accept responsibility for this problem, even though there are many other people having the same problem with this type of washer.

The Whirlpool water heater I bought 2 years ago at Lowes has had continued problems with its thermocouple causing the water heater to shut down. At first I would have to relight it about every 2 weeks, now I had to do this everyday. I was going to replace the thermocouple until I read numerous sites explaining that several people did this and experienced the same problems.

I wouldn’t recommend buying Whirlpool appliances. Hot dishwasher in December used 1 month and the board went out. 3 month to get a new then they install it and they sent the wrong user interface. Wait another month. Still no call. No dishwasher. Everyone I know has issues with Whirlpool appliances that are branded as made in US yet if they truly had good components that were made in the US they would get more customers back.

I agree with the comments already made. My crisper drawer plastic rectangular piece just literally decomposed! It shredded into little pieces and cracked and broke, dropping one side of the draw set. I called about it - nope, not under warranty - replacement cost? Merely $150 so my drawers could be in the refrigerator. Also, because of the stress of the angle the drawer holder was when it broke, it cracked the drawer at the back - and the drawer had one grapefruit in it at the time. (Not considering replacing - cant imagine what that would cost when the little brace piece approx 14 was so expensive.) The flap - yeah, it split. I am a single person, no kids EVER in my refrigerator and I travel so much that I am barely home 20% of my days. The refrigerator gets very little activity opening and closing the doors yet the flap sliced. HOW DOES THAT HAPPEN??? With any break in the seal as they called it, the refrigerator starts collecting moisture inside (and I live in the desert so we have very little moisture in our air) and drips or starts causing frost build up on the icemaker. Yesterday, once again, the icemaker stopped working. When I asked about replacing the flap I was told the entire seal needed to be replaced @ the cost of $232 PER DOOR!! Right now with just the plastic rectangular piece and the bar between the two drawers (BTW the rollers on the frame are not included with the frame purchase they announced) I have $614 in repair parts WITHOUT fixing the icemaker! Last night water was running in my refrigerator from the icemaker. I WILL NEVER BUY OR RECOMMEND WHIRLPOOL TO ANYONE EVER AGAIN. I have been a Whirlpool ONLY customer for over 45 years!!!! They told me that I had to schedule an appointment with a service person at a minimum of $100 cost to me - JUST TO FILE A COMPLAINT with Whirlpool! They only take complaints from service people submissions. I advised the Whirlpool representative to start looking for another job because if this was the way they treated lifelong customers, her job may be eliminated due to No Customers! Does Whirlpool seriously NOT CARE about their customers? #WhirlpoolSux #WhirlpoolRefrigeratorsAreMoneyPits #WhirlpoolDoesntWantCustomers #WhirlpoolDeservesToGoOutOfBusiness #DontBuyWhirlpool #WhirlpoolFrenchDoorRefrigeratorsHorrible #NoServiceFromWhirlpool #WhirlpoolDoesntStandBehindProducts

Within 5 years, this is my experience: A broken brand new Whirlpool fridge after 6 months of purchase; a broken oven that needed repair after 1 year, and today, the oven door just shattered in pieces after I heard a loud noise from the kitchen, almost injured the kids. And guess what, I just returned a new Tilt-Head Stand Mixer KitchenAid that wouldnt stay in place; the head keeps on tilting and would not stay locked. After being on hold on the phone for almost 3 weeks for a return, I found out it was a Whirlpool brand family. This is horrible, I would suggest to never buy the Whirlpool brand; their products are a real nightmare and their customer service is not reliable. If you do buy from them, expect unreliable products and very long long wait periods on the phone.

Im so tired of the mold smell that never goes away, even after following their cleaning cycle many times over. I dont know what to do but I spent extra $ to purchase my washer and now this!

I purchased a Whirlpool washer in 2005. After the extended warranty expired, our washer broke. The Whirlpool manufacturer did not have parts in stock. It’s on backorder, so what does that tell you? So we have had to wait for over a month for the repair shop to receive parts from Whirlpool’s manufacturer. Service is very slow and the quality of product is very poor. After five weeks and no repair parts, we are going to have to purchase a new washer since we do not have our washing machine repaired yet. I promise to never purchase a Whirlpool product again.

Washing clothes is a nightmare. I am constantly removing clothing from the washing machine that have been torn and left with holes. I am utterly frustrated. Because the machine is more than three years old, there has been no solution to my problem. I have now replaced clothing items in excess of $2,000. I am always here that they will send a repairman and yet there is still the problem. This machine is costing me too much money. The newer machines have fixed the problem. There is no gap between the drum and the doorway or rubber piece. I want that piece to stop this nightmare. This machine has taken a dream of mine and demolished the experience. I hate washing clothes but more so having a machine at home and then going to the laundromat to stop the chaos with doing laundry at home.

First of all, I want to thank all of you who took the time to write all your comments. You have helped educate me in many ways. For one thing, I had no idea that Whirlpool made such bad appliances, or at least water heaters. I pretty much grew up in a Whirlpool household. But that was a long time ago. Things change. Anyway, I too bought a Whirlpool from Lowes about four years ago. It was the top of the line 50 gallon energy saver, and it has had problems staying lit for the whole time I have owned it. Because I read your comments before contacting Whirlpool (this time), I knew exactly what to expect. And that is what I got at first--someone trying to sell me parts via shipping costs. I said no to that, and a rep called and offered to replace the unit, which is exactly what Whirlpool should have done for all of you. I am writing this out of courtesy for Whirlpool. They did the right thing for me, and I truly do appreciate that. On the other hand, Lowes wants $700 to deliver and install the new unit. I live seven miles from the store. They set my other water, the Whirlpool I purchased from them, up in my garage. It is extremely easy to get to, and it is all up to code. In other words, even though they sold me a defective product and profited from both the sale and the delivery, they now want to do it all over again by charging so much for the set up. They did not even offer to prorate the new install. Of course, I will hire and pay a certified plumber to do the job, but I am very sorry to lose Lowes. I have always enjoyed shopping there. Home Depot is just across the street, and even though I have learned not to purchase a water heater, or any major appliance there either, I will go there from now on. Losing my business might not worry Lowes a whole lot, but two years ago I bought $5,000 worth of fencing from them, and God knows how much over the years. If you and I and all the thousands of other unhappy customers would stop going there, they might feel a bit sorry for doing us all so dirty. Agreed? Thanks again, you guys.