So, I have a house full of relatives from out of town staying over and as luck would have it, my Whirlpool water heater (model # BFG1F4033T3NOV) which I had installed 15 months ago, decided to stop working. The pilot light went out and would not stay lit no matter how long I held the red restart button. I called Whirlpool customer service and was informed straight away that their computer system was down and they wouldnt be able to order parts if I needed them (great start right?). I explained to the woman on the phone what my issue was and also told her that after searching online, Ive found that this is a common failure with these hot water heaters that Lowes sells where the thermal couple is defective and needs to be replaced. She began to inform me that before any parts was ordered (which she couldnt do because the computers were down), I would have to clean the vent openings on the bottom of the HW heater. No big deal. Then, Id have to have my gas line pressure verified by my gas company (what?). If both were found to be fine, Id have to confirm that my flue is at least three feet above my roof line before they would send me parts to repair my unit. This is about where I lost my mind.I run the RMA/Customer service department in my company and if anyone has issues with our products, we ship first and ask questions later. How can a company with known defective products give their customers the runaround and basically tell them that they are screwed until they can take off time from work for a gas co. to come to their home and will also have to have flue replaced before theyll warranty their product?! Whirlpool should be ashamed of themselves and Lowes should distance themselves from such a crappy company with substandard products and shoddy warranty practices. Ill never buy another Whirlpool product as long as I live and will warn anyone away from this company.

The agitation is too loud. I called Whirlpool customer service and said I wanted to return the washing machine because it was so noisy. Whirlpool customer service agreed that it was noisy and said they would send a technician out. Whirlpool customer service never told me the technician they were sending would cost me 25% of the washing machine cost. The technician said this is normal all machines are this loud. Now I am out the cost of the washing machine plus the cost of the technician and all I have is a very noisy washing machine. Im a real satisfied customer. The machine was bought 12 days ago.

How would you like to be without a refrigerator for 10+ days? How do you justify 10 days without a service tech being available for what I call an emergency! Either you need to hire more technicians or make BETTER products. My suggestion is have a supervisor go out to a call first and access the problem. My case, a tech shows up after waiting 10 days, to tell me my refrigerator needs all the parts. Which means Ill have to wait probably another 2-3 weeks for the parts to arrive. Im sure the parts werent ordered to be expedited. Im beyond furious. We lost everything in our freezer. Doesnt stay frozen in coolers.When we purchased the refrigerator, just under two years ago, the service tech was out three separate times because our ice maker kept going on the blink. Finally, I purchased ice maker, because your refrigerator only makes ice when it wants. Not reliable! Second problem, the lights in refrigerator & freezer went out. Real smart to install LED lights that can only be replaced by a technician. Insane for the consumer. (Cost of lights replaced w/o warranty contract is $100). DONT BUY WHIRLPOOL PRODUCTS UNLESS YOU ENJOY MISERY!!Why would you put glossy black finish on front of refrigerator, and the sides have black texture, where you cant see fingerprints. Has to be cleaned daily! Hope you can rectify the problem before two more weeks pass. Model: WRS322FDAB. SERIAL#: HR72710418. Not a fan of your lemon of refrigerator. You can also view this on your customer reviews WHIRLPOOL.

We purchased a Cabrio washer in August 2013, in early August 2014 we noticed that it was not getting all of the detergent out of the clothes (noticed it on the dark clothes after drying). We use less than the recommended amount of HE detergent and dilute it in the dispenser, also always use the extra rinse. We just had a Sears service man out at a $100 cost only to find out that he gets these calls all of the time and the machine is operating at the factory settings.After reporting the problem to Whirlpool all I got was we are sorry and a link to how to operate the washer. In the demonstration video it clearly shows that the water level never covers the clothes. I know Im old school but in my opinion the water should cover the clothes so it can properly wet and agitate the items in the washer. To say I am less than satisfied is a gross understatement. Im out the cost of the washer plus an additional $100 and after a year of ownership and contacting Whirlpool less than a week after the factory warranty ran out all I get is an Im sorry you do not know how to operate a washer.

Bought a Whirlpool washer and dryer in 2/2013. In 5/2014, the washer went out of balance, but corrected itself quickly. Since then, it sounds like a cement mixer during the spin cycle. It took one month to get someone to come out and look at it. Apparently the bearings went and the part alone costs $450! Add another $250-$300 for labor and I could buy another washer. We called Whirlpool, who were unwilling to do anything to rectify the situation, i.e., replace the washer, send a replacement part, give us a discount on the replacement part. We didnt buy the extended warranty because who would think that a brand new washer would crap out after 15 months... and theres only the two of us.Not like Im washing clothes for a family of 5! I only needed a new washer/dryer because I moved out of state and didnt want to move the ones I had. Regretting that decision. Its unfortunate that there has been a decline in the manufacturing of goods to the point that they can be considered a throw away item. Will NOT be replacing this with another Whirlpool.

I was so excited when my husband bought me this as a gift this past year as we are a family of 6 which means lots of laundry. The first few months I assumed it was operator error trying to learn how the new one worked. Well here we are months later googling why it makes my clothes dirtier coming out than they were going. It leaves black linty looking streaks on all my white clothes, both inside and out and leaves white linty looking streaks on my darks, also both inside and outside. It DOES NOT REMOVE PET HAIR AT ALL! If you purchase one, and have long haired pets that shed, expect to invest in some lint remover. Im on my third type in an attempt to save me time. I will say OxiClean laundry detergent seems to be the only detergent that actually cleaned the clothes. Sadly, stores around here stopped selling.And whatever you do, DO NOT USE LAUNDRY PODS. It DOES NOT DISSOLVE THE HOUSING AND LEAVES SLIMY RESIDUE ALL OVER YOUR CLOTHES. I believe this is due to the fact that despite the setting, it uses little no hot water. Which would be great if it actually cleaned your clothes. I could run my clothes under a faucet with no soap and they would cleaner than this pos. Bottom line. Dont waste your money and if you do keep your expectations very low!

The stove is only 5 years old. The oven would not ignite. The gas was getting through, but theres no flame. Sears repaired it and put a complete flame and ignitor piece at a cost for a part of $132.00. I feel the stove is too new to have to replace anything. I am retired, so I do not use the oven often. I have only cleaned the oven one time in five years. It is very clean. I picked this stove out and paid $900.00, because I liked the style and everything about it. I feel you should look into this, and I should not have to pay for repairs in such a short time of ownership. The repair person said this stove already had an upgrade in it. Please respond. Does the whole heating element need replacing or just the ignitor?

Bought a Whirlpool Gas Range model WFG530S0ES0 in Nov 2015. Eleven months into owning it the oven wouldnt heat up. Turns out the motherboard and wiring harness needed replaced. Since it was within a year of purchase, parts and labor were covered. Dec 2018 the same darn thing happened. I called Whirlpool and they basically said, Tough luck, lady. Was I surprised, not in the least. I talked to a supervisor who said that they dont have a single complaint on their Gas Ranges. Did I believe that, not in the least. Whirlpool finally agreed to pay for the parts but not the labor. Whirlpool supervisor said that equipment failure occurs. I said theres a difference between reasonable equipment failure and unreasonable equipment failure. For a 3 year old Whirlpool gas range to failure twice, with the same problem, is unreasonable failure. The supervisor said in such a pleasant voice, Basically too bad for you. Oh and have a Merry Christmas.

I purchased a Whirlpool hot water gas heater with a six-year warranty. It only lasted three years. When I called for an RA#, I was told, Well, well send you a part after you get a plumber and pay for it. Meanwhile, there is water all over the cellar floor. I called again and was told the same thing. Two weeks of no hot water and no help from Whirlpool. I will never order anything Whirlpool ever again. They stink.

Ordered water filters for refrigerator. They did not arrive. Tracking # came back not found. Waited on phone for an hour. Talked to representative. She could not help me. Transferred me to another department. Been holding for an hour. Still no help. If this is what Whirlpool calls good service, they are completely lacking. I will not order another Whirlpool product.

Why are the Whirlpool appliances so badly made that they are not fit for normal use? Are they buying substandard parts? Do ConsumerAffairs advocate for more robust, long lasting products, particularly with current sustainability concerns for the world? Having to buy a new motherboard and burners, cups and knobs after a couple of years of normal, careful use, is unacceptable, surely? The motherboard, burners and fitting charge is almost half the cost of a new appliance (gas range). Is this acceptable?

Whirlpool Dishwasher Quiet Partner III Model #8575637, White - Purchased in 2006. As of July 2013, I can say this is the worst dishwasher we have ever owned. After normal use (once a day or less), the plastic on the front control panel began cracking in the first year, and the button covers have fallen off completely. Dishes were never completely clean (at least not as clean as other dishwashers). Dishwasher leaked out one side and needed repairs. Now it is in need of a new valve, because no water is coming into the inner cavity. Repairman says it is likely that the control board, which is getting moisture into it after losing buttons, etc., will probably need to be replaced soon as well. $300 more to spend on a repair bill. SAD (AND DANGEROUS!) THAT SO MANY APPLIANCES ARE ADDING UP IN OUR LANDFILLS. There should be a LAW requiring appliances to last a certain number of years, and to clearly state their expected life on the appliance when you purchase it. Planned Obsolescence is a common business plan these days, but there must be some control on what is allowed! (I may go ahead and repair this model just because I feel bad adding one more piece of junk to our collective global pile! Sheesh!!) And all those energy star, were so green advertisements? Well, if its soon to be sitting in a landfill, its NOT so green! I am willing to pay more to purchase appliances that will last a number of years, not need many repairs, and function as they advertise... Thank goodness I kept our very first Whirlpool refrigerator - never needing any repairs and still running like a tank out in the garage. (So I know Whirlpool, at least at one time, was able to build a quality product!)

I purchased (from Lowes) a Whirlpool water heater in 2010 unaware of the recall and problems a lot of customers were experiencing. I have changed (6) thermocouples the most recent yesterday 2-10-2014. The heater still does not work. Is there any compensation I can receive at this date. If Lowes were aware of the problems with the heaters, how can they still in honest sell these water heaters to the public.

I purchased a Whirlpool duet front load washer on 21 Apr 10 and it has experienced a major failure. It needs a new rear tub and basket, and the parts alone costs $700. The machine is barely four months out of warranty. After a lengthy conversation with a Whirlpool customer service representative, I was told that without an extended warranty, they were very sorry and there was nothing that they could do for me.

We bought a Whirlpool Gold French Door refrigerator in 2010. Just when the warranty period passed, the refrigerator started leaking water from the bottom floor. Initially, it only leaked about once per month. But as time passed, the refrigerator started leaking more often, and now its leaking every 2-3 days. I saw many people complaining on the same problem and some of them even submitted since 2006. I dont know why Whirlpool doesnt resolve this issue in many years.

May 16 - July 25, 2014. Took almost nine weeks to get the replacement. Numerous service calls. Their tech said self-clean feature should never be used. In addition, I heard that the techs are only paid for one service call, no matter how many times they come. And, they cant fix this oven. It has to be replaced. Nightmare and very dangerous. Most American families cannot wait nine weeks for a new oven to be fixed/replaced.

I purchased a Whirlpool Side by Side Stainless Refrigerator with Water and Ice Dispenser Model #GSF26CYEXY03 and Serial #HR22908384 for $1397 in October 2012 from Orvilles Home Appliance (GREAT COMPANY!!!). It had problems from day one. The handle wouldnt even attach on the one door so Orvilles graciously went back to their main store and took a handle off their display and put it on ours until the new one was delivered. Then there was a $100 rebate on the fridge. Unfortunately, we misplaced the paperwork and sent the rebate in a little late. We apologized for the delay. The end result was a declined rebate. That was one of the reasons that we chose this particular model in the first place.Next, both of our doors rusted. After Orvilles contacted Whirlpool and went back and forth with them, Whirlpool decided to replace both doors. So Orvilles came back to our house and changed them. The guys were baffled about the rust. Thank goodness that it was still under warranty for that. Next problem was the ice dispenser. It makes ice perfectly but dispensing it is another thing. For the last year we have had to take the ice bin out and empty it and start from square one over a dozen times. I contacted Whirlpool just the other day and was told Sorry. Its out of warranty! We can arrange for you to have the Repair + 1 for a total charge of $356 and then you will have a 1 year operational warranty with that. My thought was REALLY!!! While I was on the phone I mentioned the next problem with it.This problem is with all 3 storage drawers. The fronts of all of them have broken off and now I had to tape them. They all broke within a matter of a few months apart. When I talked to the girl from Whirlpool, I told her that I looked them up and the drawers cost about $54 each. Her answer was I know and I am sorry maam. Unfortunately there isnt anything we can do. Thats why I choose my appliances very carefully! I was shocked to hear that. Just to sum everything up... I am so glad that I spent $1400 to have so many problems and then was given the opportunity (which I declined) to spend another $356 to repair an appliance with icemaker problems and then be expected to spend another $150 to replace plastic drawers. This company is absolutely terrible!

Bought new. About 3 years old. Been repaired 2 times. Will run about 10 minutes, drain, and stop. Does not clean dishes. Model #du1015 xt xs2 Whirlpool Quiet Partner 1. Never will buy Whirlpool again.

I am questioning my loyalty because the last two Whirlpool fridges have been repair prone, and have bad design issues for ice dispensing. The dispenser door doesn’t close reliably and lets the ice maker warm up and melts the ice. This supports my rating.

I purchased an HIE washer one year ago this month. I have never been happy with the cleanliness of the clothes when they came out of the wash. The only way to get them moderately clean is to wash a few items at a time and even then the whites, especially socks, seem dingy. I noticed the new Whirlpool washers now have an extra setting to add more water to the machine, so the executives have realized there is a problem with the original model.I think Whirlpool should give all customers who previously purchased the models without this feature a trade-in option to get the newer model that fills with more water or for another model with the full spindle that has worked well for so many years. I have been very unhappy with the performance of this washer and would only hope the executives would do something to resolve this problem and satisfy previous customers.

Changing the filter is difficult & expensive. And where has the old fashioned service gone. New refrigerator and would have to pay for service. This happened when I bought the refrigerator a couple years ago. I do not think this should be the standard for a new refrigerator.

Bought microwave two years ago, almost immediately when stove area got warm, the microwave would not work properly. It would beep, the info keypad would cycle, then freeze up. After unplugging and letting it sit for a while, it would work fine for a time. Now it doesnt work properly at all. We keep it unplugged until we need it then it may or may not work. I have had a service company look at it and the only thing they could figure was that was an electronic failure from the heat. I am concerned that it is a fire hazard and leave it unplugged. Not what I expected from a $1000 appliance. I wish there was a class action suit that I could join.

Purchased a G16SDRXX07 three door Whirlpool refrigerator two years ago. Ever since new, when there is a very short power glitch the refrigerator shuts down and will not re-start without manual intervention. This happened at two months. Whirlpool replaced the boards. Still does it. Also when this happens the water dispenser will no longer dispense continuous water. It stops after three ounces. Now they want to charge me for a service call and parts to correct a problem that is obviously built into the unit. There should be a recall on this. Whirlpool should correct the problem free of charge as it is obviously an electronic design issue. Upgrade the necessary control board and replace it. If not, after being a loyal Whirlpool customer for 42 years, we will replace this unit with a different brand that Whirlpool does not build.

I bought a 50-gal. Whirlpool electric hot water heater about 6 years ago from Lowes. About every two years, something goes bad. So far, I had to replace electronic control board that sits on top of heater twice. Then the heating element went bad. Well, this time, the electronic control board started to smoke and melt. I was home so I smelled something melting and found it. What would have happened if I was not at home? I have dogs that are like my kids; they could have been killed. Whirlpool wants to send the replacement parts knowing this part is no good. Do not buy a Whirlpool electric water heater! Now, Im scared the next time I wont be at home to find the thing smoking. I dont have money to buy a new one. How many other people have the same problem?

I purchased the refrigerator in Nov. 2013 and it stopped working completely on 3/22/14. I called Customer Service and they told me someone from Apple Appliance would be here on the 24th, it is now the 27th and still no repairman. I have contacted both Apple and Whirlpool everyday and have gotten no satisfaction at all. I just found out that I will have to wait until March 31st to have someone here. I have lost everything in the freezer and refrigerator and have no way to cool anything. I find this unacceptable but have no alternative but to wait until Whirlpool does something about it. I will never purchase any other appliance from them.

We bought an 80 gallon lifetime warranty electric water heater. We get about 20 minutes of hot water and then cold water. Weve had 2 plumbers out and checked our system and said it has to be the water heater, but they dont want to mess with it in case it voids the warranty. Fine. We called Whirlpool and since the alarm system isnt indicating an issue, they say its not the water heater. We now have to do a diagnostic ourselves to find out if it is the water heater. What? It has a warranty! We are not plumbers! How come Whirlpool doesnt think its their equipment? Weve already had ours checked and it isnt us! So frustrating and we will not buy another whirlpool product again! Not good customer service to promote repeat buyers. Whirlpool, shame on you.

I have recently installed a Whirlpool water heater and was thankfully home when I heard a pop sound and my water heater had exploded inside. The heating element also caught fire. I called customer service and was not satisfied with the response from their customer service team.

Purchased a Cabrio Top Loading Washer and Dryer 3 years ago from Lowes and our clothes have NEVER even come close to coming clean without spending a ton on stain removing aids, which only work part time. So I approached the salesperson at Lowes and I was informed (after the fact) that the Cabrio top loaders had poor ratings due to the fact the basket only spun 30 times a minute whereas the front loaders spun 300 times a minute. So after 3 years Im forced to bite the bullet and purchase another washer. Ever since they purchased Maytag, their quality control has gone down the crapper. Now Im going back to the old reliable, the agitator washer. Newer is not better in this case.

I absolutely hate this expensive piece of junk. I have tried everything, and my clothes are not clean. It is only myself, and my husband, and our clothes dont get very dirty. I would like to send this junk to the junkyard, but I spent a lot to get the dryer with steam that went with the washer. This experience has soured me on Whirlpool appliances, and now I learn they also make appliances for Maytag!

We purchased a WHIRLPOOL appliance 1.5 yrs ago. Approximately 7 months after purchase, the refrigerator began making a high pitch whining noise. We contacted WHIRLPOOL who sent out a mechanic who really appeared to not know much about the product. He made some sort of bogus repair and call himself fixing the problem. Well, a few months later, same problem... same noise. Now we are asking WHIRLPOOL to help and theyve done NOTHING. Now we are fighting between LOWES and WHIRLPOOL to fix our problem. We spent $2,000 on this appliance and I feel like we purchased a LEMON refrigerator. Did I mention the ICE MAKER seems to be the keen problem. I will NEVER purchase another WHIRLPOOL appliance. Im SO done!!!

Whirlpool Washer W10740628A - So disappointed! I have made adjustments for a year trying to get clean clothes from this machine. Compared to my previous machine which wore out, I now use more water because only deep water wash provides enough water; I always choose double rinse because if the machine does not clean, I do not trust it to rinse effectively either. I use more Tide than previously per wash; I use more Clorox than previously per wash. Everything from tea towels to heavily soiled jeans show stains and soils after washing. Instructions say not to spread the item in the washer but allow it to stack on itself, so twisted and tangled wet clothes are the result. I try to soak and scrub all visible dirt before I start the machine now; additionally, I use a mop or plunger or my hands to thoroughly immerse the clothes in the washer, somewhat like my mother did in 1950s. What on earth is this about and what is the buyer supposed to do???

I purchased a Whirlpool dishwasher on March 13, 2007, along with a 3-year extended warranty. Well on Nov. 15, 2011, I had a part in the control panel go out, so they replaced it and they charged me $129.00 for labor and $29.18 for the part. My dishwasher is doing the same thing. It doesnt finish the cycle and I have to restart it, so I called the repairman A&E. They said the part is only guaranteed for 90 days. The part only lasted six months! Its the same part and the same problem. It should be considered a defective part. No matter how many you have replaced the part, it is going to need to be replaced and at $160.00, I cant afford it. They should have to pay for defective parts. Also on this model GU2600XTPSI on the panel buttons, the start button was made with this puffy plastic that has pulled apart and now it looks terrible! None of the other buttons were made this way. What a crappy workmanship, they should be embarrassed. This dishwasher was not cheap; it cost $650.00 plus $50.00 for the warranty. 4 years is too short of a time to have to replace any home appliance. There are appliance out there that are three times as old as mine and they are still working. I guess in the last 10 to 15 years, big companies dont care about their products or the people who buy them, just about their profits! I will never buy or recommend Whirlpool products.

The washer worked well the first year and has gone downhill since. There is mold on the rubber seal where the door closes. This was supposed to be a recall and was never sent the replacement part. We have to constantly use bleach to clean the rubber.

Be very careful when you buy this heater. It will go bad within a short time, and you wont have any hot water heater. You call Lowes, they wont take it back, they will tell you to call Whirlpool who may send you a part or send someone to fix it. No hot water for many days. Again, after a short time, it will stop working and by the time you get it fixed, again no hot water for a long time. This is the pattern with this piece of garbage. So you get disgusted, rip the thing apart and take it to Lowes for a refund.. Sorry Dude, they wont take it...it is stated in their receipt or on the literature that came with the heater. Your best bet... put a bunch of dents in the heater and tell them it was damaged when you opened it... Lowes will be obligated to refund the money. With so many complaints on Consumer Affairs and other web sites, why is Lowes still selling this heater and no other brand??? Maybe Superbowl tickets or a trip to Hawaii for the buyers...who knows...but one thing for sure, since Whirlpool does not respond to these complaints, I will guarantee you that their other products will suffer in sales because, I for one, will not buy another Whirlpool product.

After 32 years of marriage and nothing but Whirlpool (because my mother swore by Whirlpool), that is all we have used. I am so disappointed in the Cabrio washer/dryer set we purchased at Lowes. After 18 months, the dryer just quit. The best part is, we hang clothes out most of the time. It was used one winter, $1400 wasted. We put a cheap Admiral in our second home and spent $500 total and they work fine. I will never ever purchase Whirlpool anything or recommend to anyone. Again, you lost a family tradition.

Whirlpool model WRV986FDEM Purchased May 31, 2017 from Lowes. Cost: 2,638.10 including 229.97 for the 5 year extended warranty. We’ve experienced four failures in the nearly four years we’ve owned this lemon. The first failure occurred within the one year manufacturer’s warranty period. The three failures since then have been fairly close together. Control boards and mechanical parts have been replaced. We are now waiting for a “made to order” part, with no scheduled delivery date. When I pressed Lowe’s on the reliability of this fridge, I was told that if four failures occur during the extended warranty period, they would give us a replacement. Considering the delays in repairs and frequency of failures, this is unacceptable. Do Lowes and Whirlpool expect their customers to just suck it up and do without a refrigerator for months while we wait? The warranty is worthless without prompt problem resolution. Whatever happened to real customer service?

My microwave came with my house. I didnt choose it but it has been a great brand. I love the preset timers for defrosting & for popcorn. Its big enough to handle an 8x8 pan which was important to me. The turntable could be more stable. My model is a built in over the oven option. Black & digital. It has lots of preset options & is pretty user friendly. I like the size & it is super quiet.

It is my belief that through my experience that most Gas Range manufacturers mainly Whirlpool corporation purposely designs the stove igniter part to fail in 5-10 years. They do this in hope the consumer will purchase a new stove. The igniter in my stove has failed 6 times since I purchased it in 2005. I have had to replace it at my expense each time. The last time it failed, I asked Whirlpool if they would do a good faith gesture and replace it. They very rudely refused. I will never purchase another Whirlpool appliance again and encourage others to follow me. If they give me this much grief over a simple good faith gesture, I can only imagine the difficulties in getting them to honor a warranty claim!

I purchased a Whirlpool Cabrio on October 27th, 2010. The Cabrio is always giving me the UL code, which indicates the load isnt in balance. Ive been doing laundry for 27 years. I know how to load dirty clothes into a washing machine evenly. Sometimes it will take me all day to do one load of laundry! Seven months after my purchase, my Whirlpool Cabrio washing machine started giving me the F51 error code. I called the phone number on my Lowes receipt for warranty work. Two weeks later, I finally had my washing machine running again. I was happy and thought Id only have to deal with the UL code. Boy was I wrong?!Now Im two weeks away from my warranty expiring. Im getting the F51 error code again! This washing machine is an $800 piece of junk! Hopefully, I can get the Cabrio repaired before my warranty expires in two weeks. I do a lot of laundry. We are a family of six. So, I know Im hard on washing machines but come on. Shouldnt an $800 washing machine last at least two years? Im not even a full year into owning this junky washer and Ive had two breakdowns! In my opinion, this washing machine needs to be recalled and people need a reliable replacement or refund.

Because the Korean appliances are a problem for repairmen, were stuck with a Whirlpool choice. Seems to be a good fridge. Noisier than my Kenmore (Korean). I got instructions from repairman on opening right door first and closing it last. Otherwise rubber wears out too soon. If I put anything on left door opposite ice maker, it freezes, making that shelf useless! We had ordered a Kitchenaid but the installers damaged it.

This aqua clean is garbage. Had Whirlpool with heat clean perfect. Now have to clean my oven with self cleaning over easy off. I am so disappointed. I always thought of Whirlpool as a good choice. And have bought Whirlpool before. But not after this. Bad, real bad.

Aqualift is a Joke. We recently remodeled our kitchen and purchased a new Whirlpool range model #WFE710HOAE. It came with a feature called Aqualift Technology to clean the oven. The button you push to start it says Aqualift Self-Cleaning. I followed the simple directions and when it was finished I was surprised to find that nothing was clean. I tried it again with the same results. I had to then clean some of it with the enclosed scrubbing pad. You cannot use any cleaners except one that they also send a small sample of. In short, it was like the old days cleaning my mothers oven with a scrub pad and a lot of elbow grease. I spent 30 minutes getting it somewhat clean. I am so disappointed and mad that Whirlpool can just blatantly mislead consumers this way. No one wants to buy an expensive product such as this and have to clean it by hand. You get as good a result if you do not even use Aqualift. My last range lasted 20 years and all you had to do was take a wet cloth and wipe out the residue. Whirlpool is at best incompetent and at worse criminal and purposely misleading with this and other similar models and should recall or be forced to recall and replace these with a working technology. I am surprised that the Federal Government has not stepped in. I would be very supportive and would participate in a class action lawsuit on this matter. As I stated in the beginning, this product is a joke.

I had a Whirlpool Natural Gas Water Heater professionally installed on 2-27-2107. This unit came with a Honeywell controller and thermopile assembly. Today is 05-18-2019 and the unit is not inoperative. The pilot is lit but the burner wont light. Here are the issues that I have come across so far: When I go to the Whirlpool site there is no direct link to Whirlpool water heaters, just kitchen appliances and washer/dryers. When I click on parts and accessories link it gives links to washers, dryers or pedestals. Again... No information about water heaters. I scroll down to the bottom of this page and I see a link to All Replacement Parts When I click that it takes me to another site managed by RepairClinic. When I enter the model number for the water heater it says Not Found. I entered the part number for the thermopile on the tag on the orange wire #321165-002 and 100078039 and again it returns as Part Not Found.Its obvious that Whirlpool is putting little effort into supporting their water heaters or their customers. I called their support line and they were able to order the thermopile assembly for $55 plus $27.95 in shipping to get it here by Tuesday. Today is Saturday. So that means almost 4 days without hot water. And since this water heater was a warranty replacement for a previous one that went bad they will not cover the cost of replacement parts for the thermopile. Lesson learned: No more Whirlpool purchases for any of their appliances.

Purchased my first Whirlpool refrigerator, model WRF989SDAM00, in 2012. Six service calls later, Whirlpool replaced it with the same exact model. I am now on my 4th service call with the 2nd refrigerator because of dripping ice maker, fan going out in freezer, condensation continually dripping on everything in the refrigerator. Finally, last week, I had enough & wrote certified letters to Whirlpools corporate offices, the service company they sent out to fix it, which was a nightmare by the way and the Better Business Bureau. I am still without a working refrigerator after two months!!!This is two lemons that Whirlpool has sold me in less than two years and the service has been horribly unacceptable!!! I am at my wits end. Today I wrote to the Attorney General. Whatever you do, DO NOT buy this model refrigerator!! It has been a nightmare!! !

I purchased this fridge in February 2015. In August, the handle on the fridge door broke. I called for a replacement on 8/7, on 9/14/15 I received it. It broke on 10/3/15 and had a replacement on 10/13/15. It broke again on 12/26/15. I called for a replacement. I should get it in 10 days. Obviously, there is a flaw in their design. What bothers me is that no one seems to care. I will hope I never have to buy a Whirlpool product again. And I will certainly discourage anyone I know who is thinking about buying their products. I purchased this product at Lowes and they did not care when I went to them.

In addition to that I find the HE rating a joke as it takes 2+ hours to run a load of whites despite it saying on the read out that it will be 1 hour and 4 minutes, it literally tears up my clothes. I have now gone through 3 sets of sheets, 4 towels, 5 baby onesies... How can a washer that doesnt have an agitator cause holes and shredding in a garment? I honestly dont know what to do anymore. It takes two days to do the wash for 2 people when I could get it done in hours with my old machine. And to think I spent close to $900 on this washer makes me sick! I want to go back to my old agitator type washer from Maytag!

I purchased this model 2 years ago. I absolutely hate the fact that there is not enough water dispensed to clean my clothes. Part of my clothes dont even get wet, therefore, I have to press pause and add 2 to 3 gallons of water during the wash and rinse cycles. I do like the spin cycle as long as it does not get unbalanced.Wished I had never purchased it.

Last week dishwasher leaked. Set up repair with our local gas company that has service plus. Came today. Repairman showed me there is a hole in the bottom of the tub. Upon closer inspection it looks like the manufacturer drilled a hole that wasnt needed so they routed out a depression in the tub and must have put in some sort of plug or filler of some kind which now came out. I called Whirlpool and explained to lady about the defective tub. She said well if it had a plug of some sort put into the tub it would have fallen out before this. I said Well it didnt it just must have happened as it never leaked before. She said it is no longer in warranty. I told her this is a defect to me as if you drill a hole in the tub that wasnt necessary and then the plug failed that you put in to hide the extra hole. It is a defect not a warranty issue. Upshot is she wouldnt do anything about it. I told her I have always bought Whirlpool but if this is their policy its the last time I buy anything made by Whirlpool. After reading all the complaints registered here about Whirlpool I guess I am more than fortunate as my dishwasher (bought in 2006) had run great until their plug fell out (Great except for all the rinse aid that has leaked out for several years.).

Front load washer Whirlpool Model# WFW9400SW02, only had this machine for about five years and the main interface control board has gone bad. This part cost 1/2 as much as buying a new machine. My parents had the same washing machine for almost 30 years and no problems. Whats wrong with this picture?

I bought a Maytag front load washer on October 24, 2010. I have not been able to use it because it came damaged by the manufacturers. I contacted them by phone several times and it took them three months to send someone (A and E sears repair). Two months passed and I did not get the parts necessary or a replacement washer. I kept calling and finally they sent someone again in May 2011. They said they where going to order the parts because the new company was not going to replace the machine, even though it was already damaged. They said I would get the parts between three-five business days. I only got one part. A and E sent a repair guy again on the 22nd of June. This one said they needed the entire machine in parts and that he would order the parts. I called A and E one week later and they said they were waiting for the on manufacturer to send the parts (Whirlpool). The 26th and the 27th of July, I got the parts. On the 22nd of July, another repairman came and said we needed more parts. Today, August 16, 2011, I called Whirlpool and A and E and now they said the parts wont be here till after October 26, which by then I would have to pay for the parts and labor if I wanted it fixed because by then the one-year warranty would have expired. So here I am with a $700 washer, which was never used and they refused to fix/replace. They sold me a lemon!

Whirlpool Cabrio Platinum WTW8800 model - In the words of the service technician who came out finally to service the machine. This machine is a piece of crap that should be recalled from the market. It is a low level-water unit that has no agitator ability in it and does not provide enough water to even slightly clean clothes. Everything must be sorted into the smallest loads possible and even then the clothes dont clean because they beehive into a ball and do not agitate. Technician says the machine cannot be fixed and simply recommends it be trashed (it is 1 1/2 years old). Technician recommends going back to front loaders where at least the clothes agitate. Called Whirlpool for help and was told all system are down...duhhhh. Call back in an hour and Good Luck.

Purchased Whirlpool side by side June 2010. Within a few months realized major problem with ice maker. Reservoir on door would leak and freeze inside the door. Service man out at least twice, advised to maintain service contract as would continue to have issues. It still leaks, freezes up and does not dispense properly. Now the inside liner of the refrigerator is cracking and neither the warranty company nor the WHIRLPOOL Manufacture Co. will stand by their product. It is my intent to warn as many people as possible, so they will not have the same bad experiences.

We have a Whirlpool Cabrio mod. WTW5600 XW2, ser. C12830447 he... H2O.. low wash system. Less than two years old. It does not get clothes or towels clean. I put 2 jackets in on bulky items and part of one of the jackets was still dry. They were two small childrens jackets. My husband and I wash as long as possible and on hot wash (which is not hot!). Should not take 70+ minutes to try & get normal clothes clean!Now the softener is draining into the wash with the detergent. Another service call. Learned you can only fill the softened bin half full or less. WHAT??? Our extended warranty is up soon and not sure what to do. We would like to get rid of this pile of junk but cant afford another washer bill. Also wouldnt want anyone else to get stuck with it. Its a shame a company cant put out #1 good product and #2 stand behind it. Bring all of the company production back to the USA or put out a better product and stop worshiping the almighty dollar. Im done with Whirlpool (which was the product to buy), but stuck with this washer for now until we are sure that the brand we buy performs as it should. What happened to the PRIDE in & RESPONSIBILITY of making a good product and standing by what youve made. As my hubby has said, if you have to buy an extended warranty, whats wrong with your product! Again worshiping the almighty dollar or is it you just dont care about the people who buy your product or its quality. Maybe both.P.S. Have contact you before without a response.

I purchased a (second) Whirlpool washer (WFW87HEDW0) in October 2014. Since purchasing (and to this day), I manually dried the rubber gasket after completing my daily washes, knowing that mold growth was possible. I wash one to two loads of clothes about three to four days per week. During the first year, I did not notice any mold in this area and was confident that the manual drying and cleaning with Affresh was preventing mold growth. However, at the beginning of this year I discovered a little mold growth, which has slowly been increasing, in the inside lower lip of the rubber gasket. The image attached reflects mold in its current state. I was very surprise to see this happening since my diligent cleaning has been thorough and never ending. I even remove the soap dispenser tray to clean and air dry it outside of the washer and leave the washer door open at the end of the daily washes for extra fresh air circulation. This is my first official complaint about a Whirlpool front loader washer, even though I previously owned another (GHW9200LQ0) before this one and had mold growing on the rubber door gasket but, unfortunately, never officially complained about that old machine. Now, I dont qualify for the $500 compensation because I never officially complained three times within the first five years of owning the old washer. To my dismay, I did not immediately realize I had mold growth in the old washer. It was only until years later that a repairman told me that I had mold growth in it. In addition to telling me the price of replacing the rubber part and replacing a broken water pump plus labor would cost as much as buying a new washer. Before purchasing a new washer, I researched and read many reviews about Whirlpool and other brands before deciding on this new Whirlpool. I decided to give Whirlpool another chance and to follow their recommendations on the proper cleaning of the machine. Once again, I am disappointed and angry with Whirlpool and, now, have to figure out what to do with my current situation.

3-4 years ago, I had replaced my hot water heater with a Whirlpool, which was purchased at Lowes. On 10/23/11, I awoke to a flooded basement from the said water heater. When I entered the basement, I was able to verify that the water was spraying right from the casing of the unit. Who knows how long it had been spraying, but the place was a complete mess. The water was about 10 inches deep and many things were ruined. I proceeded back to Lowes and purchased another exact unit. This morning I awoke to the sound of what seemed to be water bubbling, only to enter the basement and see exactly what I saw just three weeks previously... another flooded basement from water just pouring out the side of the unit. This is an obvious defect in craftsmanship. Now I find myself with a flooded basement, no hot water, and a decision to make. Do I fight for another replacement or give up on the brand? A replacement water heater will solve my lack of hot water but for now, the question is for how long? Not to mention the cost and time spent with the clean up I did twice.

We bought a Whirlpool Gold Refrigerator from Lowes just over two years ago and have had trouble with it starting a year and a half later. It kept freezing up and the top refrigerator compartment wouldnt get cold. We had to defrost it every three months. Now it doesnt even work. This expensive unit is less than two and a half years old and Whirlpool expects us to pay for the repairs. What happened to the days when a refrigerator would last 30 years? I hate to say it but be smart and buy Japanese. At least they take pride in what they make.

Purchased a double wall oven and had it for 13 months. Used it this past Christmas and for the first time used the self cleaning mode. After an hour the power went out and now the oven is dead. Whirlpool service sent me to a local repair company and they want $70 to come out and look at the oven. This seems like a huge problem based on all of the feedback on the web. This is an obvious lemon and Im going to talk all over social media about the poor quality of this product.

It has plenty of room. The compartments within the refrigerator are well organized. There is plenty of room in the freezer. Have had this for about eight years and going strong.

Weve had this Whirlpool 5000DW1 machine since June 2017. Never fills with enough water no matter what cycle you pick! Clothes come out with DRY areas on them! Obviously not clean. Who would design a washer that you put soap in and clothes right on top of that! Seriously, how ridiculous. I will forfeit the money spend on this junk if its possible to find something built today that cleans clothes.

I have purchased a Whirlpool microwave oven last year (October). It is not working properly now & not heating well. Regarding this I have registered a complaint in the service center & Customer Care but we have not received any reply for this.

After replacing our competent GE dishwasher with a Samsung dishwasher and having to replace it immediately due to the terrible job it did, we bought a Whirlpool Gold Series (stainless tub) for just under $400. I realize this is the bottom of the stainless tub price point, but we have been so disappointed! The silverware container sites outside the regular tub, and rarely cleans even easy substances to remove, if there are more than a few items in each container. Dishes on the other levels are very hit or miss -- each and every load has to be examined for dirty dishes. Id pull this one out and return it too if it werent such a hassle. Dont buy this product.

The refrigerator has worked OK except for occasional freezing towards the back. However the vegetable bins have both broken starting with various parts of the handles in front. We eventually replaced them. A brand new one arrive already broken. Same cheap brittle plastic. No alternative available. The company denies any problems or complaints about the bins. Feels like a small profit center for them.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

I had my entire kitchen re-modeled in May of 2013 and purchase all new Whirlpool appliances. I work for Standard Pacific Homes and purchase the identical appliances we provide in our homes. I am so disappointed in the refrigerator. Two months ago it stopped making ice and I was told to replace the filter and it would be OK. I did that and still no ice. I bought ice trays. A couple of days ago, I came home to find water on my kitchen floor coming from under the refrigerator. I called Whirlpool again and no real help.... Told me to call Lowes. I called Lowes and they gave me 3 more numbers to call for service. None of those service providers had any available appointments and told me to call Whirlpool. Meanwhile my refrigerator is standing in the middle of my kitchen so I can keep the water mopped up. The refrigerator was so difficult to move. Getting the feet moved up so the wheels could touch the floor took an hour and I ended up with bruised hands. My lesson in this is to buy a better brand next time and go top of the line. I sell these to our buyers at Standard Pacific Homes everyday..... Wish I could believe in the product.

Whirlpool dryer and washers have the worst reliability, plus terrible customer service. Parts missing from factory install to faulty parts that constantly need to be replaced. Wasting precious time to meet with service repair people. Not worth it. Make products that are reliable and be accountable.

I purchased my Whirlpool washer and dryer 4 yrs ago. I was planning on purchasing Samsung but the saleswoman at Gils in Bristol, RI strongly recommended this junk!! A washer and dryer should not quit after 4 yrs w/ a household of 2. The dryer never dried properly. Each load took 2 cycles. Yes, repair were called and we were told its a design flaw. The washer just stopped spinning. Repair will would have been $550. These pieces of junk were replaced by GE electric stackables. Fingers crossed....they are working satisfactory!

This oven/range (W10665261B) has a cleaning feature that DOES NOT WORK! Do not buy unless you want to hand scrub the oven without any cleaning products. No one at the company cares. I will discard the oven.

How can Whirlpool deliver a new refrigerator/freezer and refuse to include a shelf in the freezer even though there are rails built in on the sidewalls to support a shelf??? Of course they will sell me one. The cheapness of todays manufacturers is appalling especially in light of the prices they charge.

I purchased a Whirlpool French door fridge 6 years ago. In less than a year, it was not cooling and I was able to retroactively purchase an extended warranty which ended up saving me a ton. Less than 3 years later it had broken 3 times with three different part problems with a total down time of 6 months. Despite saying it didn’t qualify for lemon law, I was able to get it replaced after presenting all the facts. 3 years later, the new one is now currently experiencing the same problem and running a toasty 58 degrees and my food is once again in coolers on ice. Shopping for a different brand and I recommend you do as well. Whirlpool used to be a brand you could rely on. No more.

My new energy-saving Whirlpool washer sucks. Laundry comes out smelling as bad as it went in. Washcloths are as dirty as they were when they went in. I have to take my dogs bed blankets to my sons home to wash them because this new washer will not even clean blankets.UPDATED ON 08/21/2015 - I have had two Whirlpool washers in 38 years. They were great. I buy a new up to date energy-saving Whirlpool washer and it doesnt last a year and a half. Now it is costing me $433 to have it repaired. I am preparing a washer and I am very unhappy with to start with. I will never recommend these washers.

I bought a Cabrio washer. Since we bought it, I have had to fix it. The machine is a piece of junk. It looks nice though. After 5 technicians later, our piece of junk is still having problems. We are a poor family with 3 kids who struggle to make ends meet. I feel that this company has taken advantage of the people who put their trust in the so called American company Whirlpool.

The Whirlpool side-by-side had the space and durability we had hoped for in the price range we shopped in. It lasted longer than the refrigerator it replaced.

I had a Whirlpool GI7FVCXWY01. Purchase 3/13/2010. I had repairman after repairman come to fix it. The last one probably saved my family and my house. The light in the back corner was not only blinking, but flashing rapidly, much like some wild party light. It eventually stopped. The freezer works perfectly fine, the fridge works when it wants to. The ice maker makes ice some days but not others. The motor on the ice dispenser is completely frozen up. Does that all sound about right? If it does, clean it out and cut the power to it before someone gets electrocuted or your house catches fire.If you cant find the electrical diagram, or the company wants $455 to answer your questions, look under the right side of the freezer draw, but not on the draw. Remove the guard on the very bottom of the unit, near the wheels on the right side. You will feel a plastic bag attached to the underside. Inside that bag is the complete diagram of all the wiring harnesses along with the schematic for the amps and voltages for each wire. Are they telling your circuit board is bad and you will need a new one? Before you do that, inside the fridge compartment, in between the water filter and the ice maker, remove the light cover. Notice that inside that space is the access to another panel. Remove that panel. BE SURE THERE IS NO POWER RUNNING TO THE UNIT FIRST. Here you will find a connection plug with more or less 15 wires that are connected to the main wiring harness. Above that plug you will find a holding chamber. This holding chamber contains water from the filter that is waiting to go to the ice maker. It has dripped condensation on the plug since the day you first turned on your fridge. Your wires are most likely broken and corroded. You will need to have your unit completely rewired, but because of the design flaw that fix will only buy you another 4-5 years. My Whirlpool GI7FVCXWY01 left yesterday 5/15/2014 and none too soon.

Dishwasher leaking thru the diverter motor; apparently the gramet # WPW10195677 gets worn out and starts leaking. They have discontinued the part and can no longer be found. I call Whirlpool and all Parts supplier in my city. Obviously this is something that happens with time (5 yr old dishwasher) and is something very simple to change. But if we cant find the part....what are we supposed to do. Also my dishwasher rack has broken 2 years ago and is holding with zip straps! Horrible product!

We have had this Refrigerator for 3 years in December of 2016. To date, we have had to call a repairman (in February 2016) to replace a circuit board on the back of the refrigerator. That took 4 days, as the company sent the repairman the wrong parts. After that $300 repair, which we got at a discount because, the repairman felt bad that the company actually sent the wrong part. Since then we have taken it apart ourselves for several reasons: The freezer compartment filled up with a layer of ice and started to melt all over the floor, shutting the refrigerator off, (which then forced us to borrow coolers to store the food) until it could be repaired. The drain tube was completely blocked and in order to fix this problem, the tube had to be taken out and modified, according to the Internet videos we then watched. In order to make all of these repairs, the door, the shelves and baskets have to be removed, which is definitely not an easy thing to do at all.There are so many hidden screws and tabs that must be manipulated with tools and by hand to remove the doors, shelves and trays just to get where you need to be in order to make these repairs. With each repair, the ice maker and water dispenser started having problems, because, each time the refrigerator has to be shut down, it takes hours for it to re-set itself. Luckily my husband had the tools necessary, with videos on the Internet to assist us. However, once the first problem started, it was a snowball effect, literally. ALL of these problems have been identified by the manufacturer, however, nothing has been done. VERY POOR DESIGN!

We are now over a month without a working fridge/freezer because of the lack of Whirlpool care. Our brand new Whirlpool fridge stopped working after 3 days. That was nearly a month ago. I have wasted hours on the phone with rude reps from both Home Depot and Whirlpool. A new one with multiple dents was attempted to be delivered today which I wouldnt sign for knowing Id be stuck with it. Now we have to wait 2 weeks for another one. A $100 compensation doesnt nearly cover our food loss let alone a family of 4 living without a functioning fridge and freezer. I will never purchase Whirlpool again!

The washer buttons stopped responding after 19 months. Lid lock sensor didn’t work. Replaced control board because new sensor did not fix it. Went bad again after a week. I have to replace it. I think 1 year warranties are not enough for a major appliance.

I purchased my refrigerator (Whirlpool side by side refrigerator model ED5FVGXW507) in January 2013. We travel more than 6 months out of the year, so we have not had excess usage from the refrigerator. After only a few months, the plastic drawers started to crack. Now, after less than a year and a half, all my drawers are cracked, as well as all my door bins. I will be married 50 years in December, have owned refrigerators for all those years, and this is the first time that I have ever had a drawer crack, let alone all of them, as well as the door bins.

First off, took five weeks to get the damned thing delivered after buying it at Lowes Home Improvement. Have problems with the drain overflowing when the washer tries to empty. Major plumbing work to rectify that. My complaint with Whirlpool is the washer doesnt work. It will partially fill and then stops. The wash light then lights up and nothing happens. I let it sit for three hours and the clothes never washed. It took an act of God to get the washer to empty. It never did spin the clothes. The washer refuses to work through the cycles. $1500 wasted on this POS! Trying to get an appointment scheduled is equally frustrating on Whirlpools website. Never again will I buy Whirlpool!

Ive been a landlord since 1997 and have multiple sets of coin laundry machines. The older Whirlpool machines are great and have lasted 25-40+ years with almost no issues. Replaced a washer with this model 4 years ago and have multiple problems. Im buying a used coin operated washer thats older than this model just to get rid of it. Cost of parts is almost half the cost of a new washer, and adding on labor and time makes no sense. Very happy to get rid of it. Electronics instead of mechanics has been the problem. Electronic switch that is activated with the coin slide broke, the main board fried, and the lid switch has caused problems

I purchased this Maytag clothes washer in 2007. So far Ive had to purchase and replace the front door 2 times. The current one now needs replacing. The plastic near the hinges disintegrates after about 2 years. This appears to be a manufacturing design defect. I have requested from Whirlpool to send me a replacement door for my washer. The part number is 34001178. The model number is MAH2400AWW. The Serial number is 14060452LE.I have spoke to four different levels of employees at Whirlpool after escalating the service request. Each time they have told me they are unable to send a replacement door to me, stating that the product is out of warranty. I realize that the washer is out of warranty but I believe this problem is a design flaw. The plastic near the top door hinge breaks down and cracks after 2 years of normal use. The last person I spoke with Michael (would not provide me with a last name) said to write to the Whirlpool corporate office with my complaint.

I have called Whirlpool six times to request a replacement for a broken deli drawer in my refrigerator. I was told to throw everything away from the unit, since the whole assembly would come complete in the mail. First call: Ordered the replacement: what came was a glass shelf without a drawer or gliders and hardware. Second call: requested the drawer and remaining parts. Third call: only received the plastic drawer without any means of installing it. Fourth call: received only one side glider, again without hardware to install. Fifth call: requested a supervisor (Kimberly) who took the order for the remaining glider and all hardware. Received second glider and (1) screw when two are needed.Sixth call: asked rep Brigitte for a supervisor and was not connected. Given the run around and told that the rep spoke with a supervisor for me and would send out a repairman to assemble the unit. I just need the missing screw. I have spent a lot of time on the phone trying to get what I need from Whirlpool and do not have time to wait for a service repairman to come out. I just cannot fathom how that many calls - with me being patient and calm - cannot produce the required items. Horrible.

Bought washer just under three years ago and the tub bearing started to sound like a jet airplane. Whirlpool seems to have an ongoing issue with the tub seal which goes bad and then allows water to enter the bearing which then fails. Whirlpool will not make it right, I guess I will have to plan on a $350 repair every two to three years if I keep this machine. I am very disappointed with whirlpool for not standing behind what is a known problem. They should replace these seals under warranty so that the Bearing does not fail. Thats my opinion, recall the seals and fix a bad design problem. I would not recommend ANY whirlpool products to anyone at this point. What other problems do they have with their other products?

I purchased a Whirlpool Gold from ABC Warehouse in Flint, MI, for $2099.00 before tax and it was delivered on 10/22/2010. Head-liner of inside of refrigerator has a crack about 3-3 1/4 inches long and the refrigerator is running more often. A repair tech came today, 10/14/2011, and did his job fine. He called Whirlpool and they stated to fix it with epoxy? The repair tech is ordering this. I called Whirlpool at 9:00 am right after the tech left at 1-800-253-1301 and spoke to Sherry. I explained everything to her in a very nice manner and she stated that according to the manual, they give us it is for repair only? I said, ok, could I please speak to her Supervisor and she said yes but it will be the same answer. I spoke to her supervisor, Lisa at 9:15 am, she came on talking about the problem and let me talk, I asked her on several occasions are you still there, and she said yes, her words were that Whirlpool only repairs nothing else for the year as per my paperwork (record). I said we dont even get this till after we purchase the item, I mentioned I had a Cabrio Washer and it was junk and had more service calls than any other machine I owned. I have a stove as well from Whirlpool it’s been good so far, I told her with service like this, and them knowing their liners are made of cost cutting saving materials as I have read enough complaints about this on the internet, that Whirlpool is eventually going under and so are the other small shops that do part work for them and their jobs will be outsourced to Japan, China, India and so on, I asked if there was another person higher up than her I could speak to and she said no, they’re not available at this time I snickered and said thats management for you. They have a customer service rep (call center complaints which is Sherry), then supervisor like you (Lisa) then some other management that dont want to talk to you. Way to go Whirlpool. I told her to document that I will never buy another Whirlpool appliance and I will definitely tell others and so on, and if we get enough folks to ban them they will leave USA or close and then Sherry and Lisa will be unemployed just like the rest of us in the good ole USA. Poor appliances for folks that can barely afford to make it and if you’re lucky and working like me and you buy something; shouldnt a refrigerator last more than this, and you stand behind your products? I also told her I know some are abused but this was not an abused product from me. It is a Whirlpool ‘cut your cost savings product’, and forgets the customer. Please look at the old appliances, I also mentioned I have an old Amana in my garage that is 17 years old runs great and never had a problem. And I gave her up for this piece of junk Whirlpool. I then told her I will write letters, emails and everything I can think of to ban this make and product. Model number of this refrigerator is GI7FVCXWBO, freezer on the bottom, fridge on top, side by side doors, solid black with ice maker. When I purchased this I bought it to last a long time as I had to finance it, and take from our monthly income. I had never had a nice fridge, but heck this is not nice. It’s a joke and the sad part is, I owe over $900.00 still and just got laid off. Thanks to the good ole USA and Michigan, but I will pay it off no matter what cause I pay my bills, and stand behind my name as a good person and citizen unlike Whirlpool. Boycott their products as they dont care about us or the American workforce. Oh, and this damage was not caused by abuse to the fridge - it was poor quality of materials in their products. Thank you for letting us complain about products! Also, it’s not like I can go out and buy another refrigerator as it took me over 18 years to get this one. Thanks WHIRPOOL for letting me down on another bad product but it will never happen again. Ive definitely learned and will teach others. Its just not fair that these big manufacturers can get away doing this to the poor people, maybe its like they say; corporate greed?

The refrigerator is 7 years old and I have already replace parts. The appliance is not made as well as they were made in the past. The inside of the Whirlpool refrigerator is small. The design of putting the soda can dispenser on the door was not a good one. Due to the weight of of the soda in the dispenser is breaking the hinge on the right door or the french door. The rubber gasket is shredding as well.

March 18, 2018. I was called today to inform me that the right front burner on my new stove Model # WEG745H0FS0 (ordered in early September and not delivered until mid-October from Menards) was not operating properly. The flame was noisy and yellow. I inspected it and found that the front burner base was substantially damaged by heat. See photo (Whirlpool stove part damage1). On inspection of the other front burner base, I discovered early signs of the same problem. (Note changes on burner base on the left of the photo.)In this photo (Whirlpool stove part damage2.JPG), you can see the damage to the burner base and also see some changes on the 3 to 5 O’clock position on the burner base on the left of the photo. This stove is less than 6 months old. The fact that the burner parts can be melted indicate poor design and danger to the owner/operator of the stove. Further, the operators manual for the stove I bought does not include any information on the model I have. It has pictures of the range top similar to mine but the model number is completely different. In addition to this, the Aqua-Lift Technology for cleaning the oven is completely ineffective. This is noted in several other reviews of this equipment. The problem noted by the other review became obvious the very first day I tried to use this range. A 2 cup pot spilled all over the cooktop as soon as I put it on the grate.

I purchased a home from Pulte and closed in June of 2020 and had no choice but to take Whirlpool appliances. Pulte does not offer high end appliances in order to maximize their profit. The first thing that failed after only 3 months was the Microwave and because we didnt want to get the same cheap microwave we upgraded and paid 400 for a Kitchen Aid, same size but never received the trim kit that matches the oven that came in sometime in October 2020. It is now January 2022 and we are still waiting for the trim kit. Every time we call to find out we spend hours on the phone.The refrigerator is a cheap version of the worst refrigerator made in China, the ice maker works ok but ice gets stuck in the chute and when it doesnt get stuck half goes to the glass and the other half to the floor. Poor design and we are stuck with it. Tried to buy an LG from Costco but it wont go through the door so again we are stuck with this small refrigerator with no room for groceries for two people. Stovetop is also cheap, only looks good the day we got the house, one of the burners would go off when turned to low with gas still flowing. Grates look 10 years old but must admit we cook every day. Oven will not calibrate and it is not accurate so we have learned to set everything 10 degrees higher to make up for the variance. Dishwasher had issues as well, unless you run it for 3 hours the shorter settings always have dishes or utensils still soiled. Warranties have expired after one year so it is now time to replace almost everything if we want decent appliances. Very disappointed but I blame Pulte for buying cheap.

In the first year of my Whirlpool Washing Machine, the motor quit working entirely. Fortunately, the machine was under a 1-year warranty and the motor was replaced by a Whirlpool service technician. My big complaint with this washing machine is this: Even though you select hot water for the wash cycle, the machine has sensors in it that only allow the water to get lukewarm. If it senses the water getting too hot, it adds cold water to bring the wash temperature back down to 78 degrees F. Next time I will do my research and buy a machine that actually allows one to use hot water.

I bought my Whirlpool refrigerator (Fresh door with Ice maker) from Best Buy in July 2017. By 2019 December the ice maker had stopped working and the refrigerator turns off / shuts down automatically. Have confirmed that the power is still on because of the display on the door. So it is not a power issue. Paid $180 for a Whirlpool authorized consultation and they said the Ice maker motor does has stopped working and the computer board needs to be repaired. This will cost me around $800. Called up customer service to see if the cost can be lowered but of course they said a NO. I am truly upset with the brand and with Customer Service for their lack of empathy.

Whirlpool’s WFG505M0BS is a reliable gas range. It doesn’t have a lot of bells and whistles (no self-cleaning mode or convection oven), but it’s also not priced as such. If you’re looking for an appliance that’s sleek, smartly designed, and quick to heat up, it won’t disappoint.

I have the 4.3 cu. ft. washer. This washer worked OK, but the lid lock does fail after about one year if the washer is in an environment where moisture may be present.I noticed the lid lock not working all the time about two months before the warranty expired. If this happens, call the warranty department immediately. After checking the ground wire and resetting the washer power over and over again, the lid lock finally stopped working completely. Here is how to fix it:There are two screws on the back of the top portion of the washer. Unscrew them from the silver straps. The washer lid will now push forward and up and off. Prop it up with a stick.Unscrew the two screws on the lid lock and start taking it apart (after reading this entire review). Be careful not to lose any parts and be sure to know where everything goes for re-assembly. Take pictures if necessary. Take the lid lock completely apart including any small pieces.The plastic slide needs to be cleaned. It has a spring that may fall when you pull it apart.The metal contact points inside the lid lock mechanism need to be cleaned. Be extremely careful when pulling the red cover off of the housing assembly. Pull the four metal contact points completely out of the plastic assembly. Be real careful with the black plastic slide piece, the metal rocker switch and the switch actuating motor. Use a small file and rubbing alcohol to clean off any green or white corrosion. Make sure to check all contact points.Re-assemble and you will immediately notice the lock switch working better. Re-install onto the machine. Re-install the upper portion of the washer. Start your laundry. Repeat after one year or when the lid lock becomes faulty again. These points should have been made out of a less corrosive material. Poor craftsmanship. Would not recommend.

Whirlpool wdf530plym4 - Bought this dishwasher 5/13. Sat for 3 months in the box while my kitchen was being built. 7/14 pump motor went out, called Whirlpool, they set me up with an appliance repair company, and I ended up paying $90. The technician was being nice, charging me less than he needed to since he said it was an easy fix. 1/26/2015 pump motor went out again. Called Whirlpool again. Lady on phone was very snooty with me, telling me it was out of warranty. Told them I was very dissatisfied, my dishwasher has broken 2x in 18 months and all she said was, I should have bought the extended warranty. Dishwasher is not even 2 years old and already needs to be fixed 2x. The most expensive part on the machine I may add. Going my average, I can keep dumping $130 every 9 months to have a working dishwasher by Whirlpool. I would understand if the thing broke after 2 or 3 years. I only run the thing 2 or 3x a week at the most.

I do like washer to be efficient and quick at what they do.. I also like the way they are economical and use less water he energy economical it what I need.. I do like clean clothes. Right now I am using an ancient one and the sound drives me nuts..

We purchased a Whirlpool Dishwasher from the Home Depot, it was installed 3-28-2015, less than 30 days ago. On 4-21-2015 the dishwasher stopped working. I called Home Depot expecting a replacement; but we were told you have 48 hours; you need to contact Whirlpool, due to the CRAP warranty. I called Whirlpool, we were told that a TECH would need to come out and address. They came today, ** , told us that the Motor is bad. (NOTE I havent made a payment on this dishwasher). So we called Whirlpool, expecting they would replace. I spoke to ** who advised me they would not replace, only repair. I explained this is unacceptable for a new product. I demanded to speak to her Manager; Spoke to ** who said the same. I asked to speak to her manager, his name is ** , but HE DOES NOT DEAL WITH THE CONSUMERS, this is beneath his job class I was told. So NOW I have no choice but to have this Dishwasher repaired; it will take over 2 weeks to get the part. I just dont understand how this is good Customer service. It is the worst I have ever experienced.

I contacted Whirlpool on 3 separate occasions. Each time they told me to have the plumber call them so that they could determine what the problem was. Each time he was able to get the water heater going again, but it would only operate for about 3 months and then it would go out again. To date, I have incurred $245.00 in plumbers service fees. My last call to Whirlpool was on 5/14/2013. This water heater was purchased on 1/25/2010 at Lowes in Evans, GA. It went out over the weekend, but the plumber was able to relight it. When I called Whirlpool on the 14th of May, I was told since it was working now, there was nothing they could do. I am tired of dealing with this issue. They wont stand behind their product.

Purchased a Whirlpool Cabrio Washer 5 years ago because our other washer died after coming home from vacation. Its just 2 people in this household so I dont do mountains of laundry. The other machine lasted 15 years so go figure. We purchased the Cabrio from Lowes. Got the extended warranty but as it goes the machine fails when all warranties expires. Over the last couple of weeks this machine started to not complete a wash cycle. All lights go off except for spin light and machine stops. Even asked the person in charge of washers and dryers at Lowes about this who then told me to get an extension cord and plug it into a different outlet. Seriously! I have had to unplug the machine after it fails to complete cycle, wait 5 minutes or so, plug it back in, select rinse and spin, it fails again 13 minutes left in cycle, unplug again, plug it back in, select drain and spin, wait for it to MAYBE complete that cycle. Do not purchase this type of machine. Just for a technician to come look at it is $100 or more and to replace whatever circuit board is probably another $300 or more. Screw that! Going to find a good old fashion one if possible. Piece of junk. Not going to spend $700 or $1000 just to wash clothes for 2 people.

I bought a Whirlpool washing machine last year. Exactly after one year the bearing problem and noise starts from it. So I do not recommend this machine to anybody because of this bad experience and also high service cost.

I have had an extremely frustrating experience with Whirlpool refrigerator WRT311. It broke after 6 months. So far it has been diagnosed twice with a faulty compressor and leaking coolant. Whirlpool will (seemingly) never replace an appliance--even if it makes no sense to keep trying to fix it. This is a $600 refrigerator! I cant imagine how much they have spent in repair costs. They simply send a service tech time after time, jerking the consumer around with no regard for what we have to go through to arrange 6 tech visits, some of them multiple hours long. Yes, we have had six tech visits, for a total of 10+ hours, and six weeks living with a broken refrigerator. As well as 30+ phone calls, hours on hold, etc.The refrigerator is loudly throbbing away after being refilled with coolant twice, and is still leaking coolant. Are they hoping the customer just gives up and buys a new appliance on their own? I wonder about the many positive reviews of their appliances: Are they fake? Are they churned out by Whirlpool? I have no confidence in this company. They are inept, if not crooked, and I would advise buyers to beware of poor quality and extremely poor warranty and consumer service.

My Whirlpool washing machine has not worked properly from the first day. Whirlpool washing machine customer care is pathetic. I bought a Whirlpool semi-automatic washing machine, Sparkle. This product is in warranty period. From the first day, this product did not give right result. Machine sound is very high and I called customer care center may times (around 9-10 times). They sent this machine three times in service center but the results remained the same. The problem arose when we put some load in it. He said the gear box should be changed and the machine should be cleansed off the dirt. He offered some powder costing Rs. 1500/- to be used in washing machine.Later, he asked Rs. 350/- for other parts after two months then I paid them again after 15 days for a piece that did not work. Then, they want to charge me Rs. 350/- again. When I showed the previous slip, they then changed that part without any cost. But after 15 days, again same problem occurred. They charged me 150/- Rs. but the problem is the same. Total money I spent is Rs. 1500/-+350/-+150/-. I also purchased a stand and cover for safety, but what will happen if product is not good? The technicians visited many times and they all said this piece is not okay but they cant do anything. The company should change this product. The machine is still rotting at my home. Im not sure if it could be accepted to be exchanged for a new one. Customer care gave us the satisfaction code but technician did not ask for this code. Im really very sad that I have called around 10 complaints within two years. Why are you people not listening? You all are doing time pass. You can check my complaint codes in your records and ask your technicians about Noida. Many times, I did not note the complaints number. Please open my file and check the issue. I told the technician many times that I want to talk to your seniors and want to tell them the problem because from the first day, it was the same, but they refused. I have also purchased a 320 LT fridge from you but that product is very nice. You should listen to our problems. This was not expected of such a branded company. I promised myself that I will never in my life purchase a Whirlpool product and advise the same to others.

I bought this nightmare machine one year ago, and stop working. If I try to program a cycle it put itself lock so I can not use or program any cycle. I can not open the door and start a noise like it was draining without clothes at all. And when finally it ends, the machine is like dead, no works, no programs no nothing. I am sick of this appliance. It is almost new and just does not work as it should be. But the worst is customer service, OMG. They lie about everything. The technician came to see what was the problem and told me it was the card, so he could not do anything until the factory send the piece to the place where I live. Well this happened one month ago and I am still waiting for the service. My guarantee was still on time, but every day at customer service they have a excuse/lie that the piece is on my way and service will be completed. Well I am still waiting and nothing happens. I am desperate. No one cares about the customer. If I would have known or read the bad reviews about these washing machines I would have never bought it. I got it at Walmart. I regret deeply. I do not know where or what else to do. Nobody cares or listen. Shame on you Whirlpool.