Whirlpool refrigerator runs continuously, but doesnt cool. I have to turn it off manually to cool down the motor. I have to run it on the highest number (5), then freezes some things on the top shelf but lower shelves are warm. We need these refrigerators and freezers replaced with different brands of our choice!

Sounding like a broken record, this washer is such a disappointment! I had high hopes for this top loader and thought I did enough research. Bought a Cabrio in Oct 2016 and have never liked it. They will have you believe it’s your fault... the wrinkly clothes, the clothes not clean enough, the white marks over all your clothes... you can’t change your detergent or softener enough and change the amount enough... it will still be there. So disappointed??? Want my front loader back!

After 2 years the motherboard failed on my Top load Cabrio washer. We had to spend $300.00 dollars to get fixed. When we called Whirlpool to see what they would do about it, they actually offered to sell us the board for $345.00 dollars and a 1 year warranty on the board. They actually wanted us to pay more from them than a local repair service. DO NOT BUY THIS MACHINE OR ANY OTHER WHIRLPOOL PRODUCTS. Also does anyone know of any class action lawsuits surrounding their obvious use of defective parts?

Purchased 11-02-2016. This Whirlpool/Kenmore dishwasher is falling apart. Top rack wheels are totally broken, ordered parts 4 times, gave up. Now they are held together by gorilla glue. I have gone through 3 gray plastic end caps for the top rack runners. Now one is contained by a plastic slip tie. Last week it started leaking. Sears was totally useless. Whirlpool keeps sending me back to them. Now, I have to go buy another new dishwasher. It will not be a Whirlpool. Next time getting the extended warranty.

2 years ago, we remodeled our kitchen. We replaced with all Whirlpool appliances. WHAT A MISTAKE! Our ice maker went crazy 1 month ago and now our dishwasher almost caught fire Memorial Day weekend while we were away! Thermal Fuse and stainless interior prevented us from losing our house to fire but really Whirlpool, you spend that kind of money and all appliances are breaking before theyre even 3 yrs old! My husband is very good at fixing things but when he diagnosed dishwasher, he said he has to find a way to fix wires in control panel because melted insulation. Now I am afraid of it. So if you purchase Whirlpool, expect maybe 2.5 to 3 yrs service and think of them like a disposable lighter, use it and throw away.

Purchased 9/23/2013 on 5/20/2014 no hot water. Called Whirlpool, unit has a 6 yr warranty. Brian advised me no one close to our area to service. He told me to contact a local plumber, they would pay for parts and $75.00 in labor. I attempted a couple of calls and could not find a plumber that was willing to come out and let us pay just the difference, after parts and $75.00 in labor and them bill Whirlpool for the remainder. They wanted between $225.00 and $300.00 plus parts. Lowes where we purchased the water heater told me to call Whirlpool back and get an RA# and they would be happy to exchange the water heater. I called Whirlpool and they (Leigh) refused but did say they would pay 200.00 in labor plus the cost of parts. The unit was only $231.23, but they would rather pay upwards of $300.00 than just let us get a new one. I asked Leigh if this made sense to her, she said it did. I guess Im just ignorant because it doesnt make sense to me. Whirlpool COULD NOT even find a plumber that would come out to our small town to do repairs under their OUTSTANDING WARRANTY. I have laughed at these people and cried over this whole situation. I can honestly say I will NEVER buy another Whirlpool product and will let everyone I know and even some I dont know (lol) how horrible this experience has been.

Whirlpool Dishwasher MOD#WDT970SAHZ0. I have to wash the dish before it goes in otherwise it doesn’t get food or anything off. It DOES NOT DRY at all. Even when I add the heat extended dry button. The normal setting takes 3 hrs & 12min to run & again, doesnt really wash & for sure doesnt dry. I have added jet dry. I called and they keep telling me it should have more jet dry! Ugh! I now have rust happening because it doesn’t dry. DO NOT BUY THIS MODEL.

The refrigerator has worked OK except for occasional freezing towards the back. However the vegetable bins have both broken starting with various parts of the handles in front. We eventually replaced them. A brand new one arrive already broken. Same cheap brittle plastic. No alternative available. The company denies any problems or complaints about the bins. Feels like a small profit center for them.

Whirlpool Microwave WMH1164XWS-1 - Well, Im sure surprised that my almost five year old Whirlpool microwave failed to heat this evening. One minute it worked, next it didnt. Watched countless repair videos, but it seems more aggravation taking the unit out and trying to diagnose the issue than its worth. Probably the same with enlisting the services of a repair tech. Ill probably think twice about purchasing another Whirlpool microwave. I purchased a Whirlpool French Door Refrigerator a few months ago and now Im concerned Ill have the same issues. All my appliances were Whirlpool and purchased ten years ago and replaced with newer models, even though I never had any repair issues. Guess they dont make them like they used to!

I purchased a Whirlpool cook ceramic cook top for our new kitchen. The very first time I made something (it was lentil soup) something stuck to the cook top. I have had a ceramic cook top before for 18 years - never had a problem until the whirlpool cook top. I cannot get it clean. I have tried everything! Such as stove top cleaner designed for whirlpool cook tops ($22), other cook top cleaners, the single edged razor, a scrubby sponge, steel wool, I even resorted to furniture stripper - NOTHING has removed this spot. I am ready to throw out this new stove top! What a huge disappointment this Whirlpool product is.

On November 22, 2013 I loaded my Whirlpool Quiet Partner III dishwasher and set it to start. About a minute later I heard an odd noise coming from the machine. I went over to take a look and saw black smoke and flames coming from the little vent area at the lower right corner of the control panel. I opened the door to stop the machine but the washer kept going throwing water all over the floor. I shut the door and ran and turned off the breaker and then unplugged the cord from under the sink. Two different repair service companies said they would be hesitant to try and repair it due to possible unseen damages. I was lucky that I was home when it happened. I could have lost my house to a fire. There is a large consumer lawsuit already in play regarding this very thing.

I have called Whirlpool six times to request a replacement for a broken deli drawer in my refrigerator. I was told to throw everything away from the unit, since the whole assembly would come complete in the mail. First call: Ordered the replacement: what came was a glass shelf without a drawer or gliders and hardware. Second call: requested the drawer and remaining parts. Third call: only received the plastic drawer without any means of installing it. Fourth call: received only one side glider, again without hardware to install. Fifth call: requested a supervisor (Kimberly) who took the order for the remaining glider and all hardware. Received second glider and (1) screw when two are needed.Sixth call: asked rep Brigitte for a supervisor and was not connected. Given the run around and told that the rep spoke with a supervisor for me and would send out a repairman to assemble the unit. I just need the missing screw. I have spent a lot of time on the phone trying to get what I need from Whirlpool and do not have time to wait for a service repairman to come out. I just cannot fathom how that many calls - with me being patient and calm - cannot produce the required items. Horrible.

Buyer Beware!!!! Warning!!!! Dont buy Whirlpool. Youll be sorry if you do! Dont buy appliances from Home Depot. Youll be sorry if you do! Purchased new Whirlpool gas range 10/29/2019 from Home Depot. By February 2020 the front door fell off, its not cooking properly (18 min frozen pizza takes 30 mins to cook). Clock not keep correct time. Whirlpool unwilling to replace the unit while the third party repair company, “well you should have bought it from us, we stand behind what we sell.” They have no idea when or if the parts will ever come in due to COVID-19. Its been down 8 weeks now.Even under threat of a lawsuit Whirlpool said, Sorry we NOT replacing it, go ahead and sue us. We covered by our contractual warranty agreement. Home Depot said they are unable to help due to their contractual agreement with Whirlpool. I have a dozen hours invested talking Home Depot and Whirlpool on the phone and have no more information than I did a month ago. Whirlpool Case # **. Next step is small claims and public shaming of Whirlpool!

Purchased a Jenn-Air single wall oven model JJW2427WS after seeing it displayed in an appliance store. Oven was installed as directed. Upon viewing the panel, I discovered that it does not light up. You cannot read the function or numbers, never mind start and cancel without a flashlight. I have been a Jenn-Air customer for over 20 years. This is the first time I have been disappointed. Also, has this model been discontinued or recalled?I wrote to the CEO of Whirlpool and explained my problem. I was told that this is not a functional problem, but perhaps a design dissatisfaction. I cannot believe that there are other consumers who are not having difficulty using their appliance without additional lighting in their kitchens.

Bought this washer/dryer set Jan 2020. No agitator but has nubs in the bottom. Huge washbasin that will have 5” water in the bottom. I watched the was cycle and my Nursing scrubs NEVER went underwater...ever. Yes, we made sure the center was wide open and didn’t cover the center, at all. Filled the basin 1/3 full. My daughter’s sweaters had been rubbed together so aggressively in the basin they were unwearable because the knit was pulled and fuzzy. Looked like they were run over in the street. Soap never rinsed out of the clothes. Two daughters developed skin rashes. After I took my clothes to a commercial washer and rewashed them, no more rashes. My mom called Whirlpool. They tell us use NO MORE than one teaspoon laundry soap. LOL! There isn’t even enough water to get the clothes wet! Try Deep Water cycle... Got 6” of water. Load requires an hour and 15 minutes to wash!! Machine is outrageously loud. Now the dryer... Takes over an hour to dry clothes. Not towels or jeans..just cotton t-shirts, nurse scrubs, socks. Takes two dry cycles. Bottom line? Two and a half hours to get one load of clothes that have soap residue and aren’t clean. Whirlpool is aware. DO NOT BUY these! You will regret it!

I purchased a Whirlpool Cabrio Set from a local store. Just over a year later, the washer got very loud like a jet engine. Called the registered repairman, he came out took a look and said he would get back to me. Called him 3 times over 3 weeks, no show (Hoodland Appliance). Called someone else, repaired it for $400.00. Called Whirlpool, they are not interested. 2 years later now and the machine is getting loud again. This is due to the spin throws water up and it is able to get out of the tub and down into the barring and the soap residue wears the barring out. Bad design. Called Whirlpool again and again they are not interested but can put me in touch with a repairman. I will not repair again but will use until dies and buy something else not related to Whirlpool. So much for energy efficiency.

We are having our second major issue with our Whirlpool Refrigerator Model WRF757SDEM but unfortunately at 1-1/2 years old, it is out of warranty. Although the certified repairman says that the issue with the thermostat is a known issue and the company created a whole new part to fix the problem, there is no recall. Customer service was lousy. They deny any know issue (again, they created a new part they will sell us to fix the issue) and they mocked us for not buying their warranty after having the first problems with their fridge. This new problem will cost over $300 to fix. Why is there no recall if they knew about the issue?

Clothes never feel clean, feel gritty and linty. See grit in dryer lint container all times after drying clothes. Always use extra rinse to no avail. Worst machine I have ever used in my 82 years. Now itching all over my body.

I purchased a new Whirlpool washer and dryer (model number WED9250WR0 #WFW9250WR00). The washer broke after about 2 months. They took my washer and gave me some off brand one, because I purchased a 5 year extended warranty. They kept my washer for over 3 months, saying that the manufacturer takes that long to get the parts in. Its ridiculous! The tub, seal, and some other parts had to be replaced. It was shredding my clothing and my bedding. The first time they fixed it, a couple days later, it started making a horrible noise. The repairman came out, and a part had fallen off inside, so he put it back on. It kept happening, so I called them back, and he taped the part on!About 2 months later, the seal started shredding, and so did my clothing. I called again, and they had to replace the seal again. It still sounds off balance, and they said that was normal, because of the give in the floor. The day they fixed the seal, I washed a childs sleeping bag, and it shredded it too! I called again, and they refused to replace it, and they want to come and look at it again. My dryer lint trap seal also keeps coming apart, and I have gone through 3 of those in less than 8 months. They said they are just made poorly, so it will keep happening. I just want my money back, and buy a different washer and dryer somewhere else. I had an old pair that I bought, used, and they lasted me 5 years with less problems than these that I paid two grand for.

I wish I had purchased this a week before I decided to become an owner of a portable AC unit. This unit cools my 390sq ft living room with ease, paired with a large 3 speed stand-alone fan, the adjacent rooms feel the coolness as well. I plan on purchasing another uni, with a lower SQ rating as to have for the master bedroom. Easy to install, move and drain when the time calls for it. Not too loud, not too big, not ugly and I would purchase this unit again.

My review merely echoes the other 1-star reviews Ive read below, but Im including it anyway. We bought the Whirlpool Cabrio from Lowes in 2013. Two weeks ago, a mere five years after purchase and shortly after our warranty expired, it broke. It kept showing the UL code and took multiple cycles to wash the clothes. Unacceptable. We called the technician; he came out; told us it was the bearing that busted; and quoted us $800 to fix it (I noticed below another customer was quoted $400 for the same issue). We told the technician thanks but no thanks and purchased a $450 Samsung washer. Our family will never purchase any Whirlpool product again. From their customer service to the performance of their machines-- its all very much lacking.

When my wife and I were planning our retirement, we made a to-do list before we officially stopped working. We are loyal Whirlpool users and over the next 3 years we purchased 4 major Whirlpool appliances in preparation of having 8-12 years of problem-free time as we go from a two-income working family to two people on fixed incomes. I retired in December of 2011 and unfortunately this did not pan out on 2 of the 4 appliances. The washing machine, in late February 2012, blew a transmission 23 months after purchase and 11 months after the warranty expired. Discussions with Whirlpool by phone were unsuccessful in getting the repair covered.Ultimately, this repair cost us $265.00. In late April, 9 months after the warranty expired, the refrigerator iced up and had to be manually defrosted, despite being equipped with ADS. My family and I did the defrosting because it was a weekend and tech support was not available. On Monday, the refrigerator was functioning, so I was told to run it and see what happens and call the tech if it happens again. I had done research online and found many folks were having trouble with this refrigerator model and the main problem was the control board”, a board that is used in many Whirlpool refrigerators. I ordered one after the initial problem and waited for it to ice up again. On Sunday, May 20, it repeated the same symptoms displayed and I put the board in myself and it solved the problem. This computer board cost me $95.81.I contacted Whirlpool about the two premature, post-warranty expiration issues in hopes of getting some reimbursement for the repairs. The Whirlpool rep told me that because there had not been a recall on either appliance, they could not reimburse me. They instead offered me a 6-month extension on the dishwasher I bought last July. I have been on several complaint websites and have seen the refrigerator control board repeatedly mentioned - all within the approximate 2-year timeline as my control board failed. My refrigerator was a GB9FHDXWQ01 model, but the control board is used in many of their refrigerators. If this has happened to you, please contact me at ** and, hopefully, together we can get enough data to get a recall and get proper treatment from Whirlpool. Please include your refrigerator’s model number so I can verify the board is the one in question. Thanks.

I purchased my first Whirlpool washer in 1959 and have been true to the brand since. This was a big mistake when I bought the WTW4950XW0. At first I thought it was the learning curve on my part with the new technology. The very first wash load was dry on the top layer....never got wet. Then there was the blinking red light .....you could never leave the room and expect it to continue to do anything. One solution I found was to unplug the washer....wait 30 seconds and plug in and follow with lifting the lid and then close the lid followed by holding the start button down for several seconds. This worked sometimes.Very noisy....sounds like a plane taking off after the gears shift and lots of clicking and a long pause to have the water to enter the washer. I have run out of patience. I am going to buy another washer today. I called Whirlpool twice for advice and they offered none but a high dollar repair and no compensation for the lemon I had in my home. Enough is enough.

GX5FHTXVQ03 - Our whirlpool refrigerator/freezer has been leaking from the freezer for a couple of years (purchased in 2011). An ice sheet builds up in the freezer unit, then leaks out. We have gone through countless attempts to defrost and correct, disconnecting the ice maker, and a replacement part that accomplished nothing. I see online numerous people have experienced this same problem. It appears to be a design defect. Made another call to Whirlpool today. They are willing to schedule a service call for us... at our expense. Gee, thanks! Hey, but they are sorry about our warped oak hardwood floor. That sure makes me feel better. WE WILL NEVER BUY WHIRLPOOL AGAIN!

My Whirlpool washer broke down on July 06, 2014. I contacted the local supplier (Unicomer Trinidad) on July 07, 2014. Their technician came on July 10, 2014. He said that he will have to check and see if they have the part that is needed to repair the machine, they will contact me the next day. No one contacted me. I called on July 14, 2014. I was told that they do not have the part and it has to be order. It will take about 2 weeks for it to reach them, no one contacted me since. I contacted them (Unicomer Trinidad) on August 04, 2014. I was told that they do not have the part and it will take 2-3 weeks to reach them. I did filled out a form on the Whirlpool support site about 2 weeks ago but no one contacted me. I contacting Whirlpool US HQ by telephone, they gave me a number for Whirlpool Florida. I was told that they are responsible for my area but when I try calling the number, it was out of service. When I contacted back Whirlpool US HQ, I was told that they cannot help me check the website for the local representative which I could not find. This washing machine is 10 months old plus I took the extended warranty. It is a Duet WFW94HEXL2 washer.

Bought this washer in May of 2019: Whirlpool - Whirlpool - 4.5 Cu. Ft. 37-Cycle High-Efficiency Front-Loading Washer with Steam and Load & Go™ XL Dispenser - Chrome Shadow. Model: WFW6620HC. SKU: 6313774. Paid over $1,000.00 for it. FIRST TIME washing our sheets, we had snags & rips. I immediately called and was referred to Whirlpool and then referred to an outside repair company. They sent a technician out who said everything was functioning properly despite having ruined 3 sets of sheets (these were not all washed at the same time & I didn’t realize they were being snagged until making the beds).I continued to use the washer - clothes were fine, but yet again, MORE sheets and now comforters RUINED!!!! I called YET AGAIN after troubleshooting the problem myself and finding that the drain holes in the drum had metal pieces sticking up causing the items to snag & rip. Another day taken off work to stay home for the repair. The repair guy comes out, the part was broken. So now I’m left once again with a faulty washing machine AND no ETA on when the new part will arrive and be installed AND having to take yet another day off work.7 sheet sets, 3 comforters, multiple shirts, & multiple bathing suits RUINED & was told there was ‘nothing they could do!’ I will NEVER EVER AGAIN purchase anything with the Whirlpool logo. It’s JUNK! Just an FYI, this was initiated in May of 2019 and it is now the middle of September 2019 with no fix updates. Who can go months without doing laundry???? Once again, poor customer service and JUNK of a product!

My two year old Whirlpool refrigerator died. The compressor went bad. $859 to replace it. I only paid $999 for the fridge. This was crazy. Two years old. Heard it was not uncommon and the technician said most refrigerators warranty the compressor for up to 5 years but not Whirlpool. Had to go buy a new refrigerator.

My boyfriend and I purchase a Whirlpool Cabrio Washer and Dryer on November 28, 2010 from Lowes in Shepherdsville, KY. Just after we purchased the set, I read some bad online reviews of the set. I called Lowes and talked to Chris ** in appliances and he assured me that this was a good set and that it was very popular with their customers. He assured me that if there were any problems that Lowes would make sure they did everything they could to fix and/or replace the appliance(s). My intention was to cancel the order when I called, but he convinced me not to, now I completely regret not canceling that order that day.In May of 2011 we called Lowes to report that the dryer was not working properly; they sent a repair person from Maytag Service Co, 1500 South Shelby, Louisville, KY 40217, phone number 502-637-6526. The name on the card that the repair person left is Steve **. The repair tech indicated that the problem was that the belt had come off and he put the belt back on the dryer. It has worked without issue until about 2 weeks ago, when it stopped drying again. I assume the belt is off again since it is performing exactly the same as it did in May when we had the repair company out.I called Maytag Service Co approximately 1 to 1 1/2 weeks ago to see when a tech could come back out and I was told they only work Monday - Friday. I told them both my boyfriend and I work and cant really take time off from work to be home for the repair. The male on the phone indicated that they could call 30 minutes before arriving if that would help. I told them that wouldnt really help since I work in Louisville (about 30 minutes from Shepherdsville where we live). He indicated that was the best they could do.Yesterday, November 7th sometime during business hours. I spoke with someone in their appliance department. He indicated that I would need to call Maytag Service Co at 502-637-6526. I called them and was advised that they could come out the next day (today), November 8th, but they could not give me a time window. I spoke to a female who did not identify herself. She specifically stated, If someone has not called you by 8:30 a.m., you can call us and we will give you a time window. Since I had just earned a vacation day at work, I so desperately need my dryer working that I took the day off to get the dryer fixed. I got up at 7:30 a.m. this morning to prepare for the service call. I have not left the house today. At 9:20 a.m. my boyfriend called and said that the service company had called and they were not coming out. I called them back and again spoke to an unidentified female. She indicated that they called my boyfriends phone at 9:00 a.m., he called them back at 9:20 a.m. I was on the phone with the female at 9:25 a.m. She indicated that I should have called at 8:30 a.m. and that they never call their customers because they dont have time to call them all. She said that when my boyfriend didnt answer the phone at 9:00 a.m., they had to send their tech on to the next call because, they cant have their tech waiting around 20 - 30 minutes on customers to answer their phone. When I told her that I took my only vacation day to be home for this call, she indicated that I would have to reschedule for another day because their tech was already on his way to another city. I then stated that I thought that was ** and she hung up on me.I called and spoke with the store manager at Lowes in Shepherdsville, KY. He called Maytag Service Co and was told that I used profanity and was rude and that I would not provide them with an alternate number. Most if not all of these are lies. I did say **, but I was not rude and I was never asked for an alternate number. I give out my number and my boyfriends number to almost any company we deal with. My boyfriend is also a service technician for Icee Corporation and he is not allowed to be on a cell phone in his work truck; therefore I always give both numbers since I can easily answer the phone throughout the day. The store manager made several attempts to try to find another company to come out and service our dryer, but cannot find anyone to come before tomorrow. Since I used my only vacation day today, I cannot be here for the technician and my boyfriend doesnt have any vacation or sick time to take to be home for the call.I cannot believe that after spending over $1300 on a Whirlpool Washer and Dryer set (including several hundred dollars for the extended warranty), that we cannot get our dryer serviced at our convenience. Since when did companies only repair or back up their products at their convenience? This in my opinion is the worst customer service I have ever seen. I thought Whirlpool/Maytag was a good company; now Im not so sure. I just wish I could return the set and do more research and find a quality appliance that wont break down 2 times in less than a year!!

The washing machine (WFS10055CD) was working fine until two months after the warranty period...It worked the night before, but in the morning, there were no lights. I emailed Whirlpool, but I received no reply. So, I called their number to ask if they would honor their faulty product JUST out of warranty...They wouldnt accept this...I live in an area with no service agents for them so I would also require freight costs of 1,000 km away...I have had an electrician examine the unit to find it may be the control panel/mother board...seems funny many issues with Whirlpool machines JUST out of warranty!!!

I have had our new Whirlpool Cabrio Washer for about a year. I absolutely hate it. I along with all the other people that is complaining about their Cabrio. I have found it to stain my clothes, not get them clean... Sometimes not even get part of them wet. I wash every load now no matter how small on the deep water option. I still have to add about 3 to 6 gals of water after it fills to try to help them get as clean as I possible can. I have stopped using fabric softener because I believe that is what may be leaving the stains on the clothes because it doesnt dilute it. Also you cant soak clothes in the washer long enough. I know it offers a presoak but when the clothes are not getting wet... That is not soaking. I tried to fill it up and raise the lid so it wouldnt wash until I was ready for it to wash but it automatically emptied the tub after a short time.It is funny watching the clothes when washing... Even I could tell they were not going to be washed well. I thought who in the world developed this washer. Certainly no one that had ever really considered what women need to wash clothes on a daily basis. I would sell it but I dont think anyone would buy it. If there is a class action suit I would consider joining in. Whirlpool could not have spent much effort in checking this washer out. A lot of money down the drain. I did not buy the dryer because of the lint vent being on top of it. What a mess those make when you have to empty it. So I purchased a Maytag Bravos XL. Now that is a wonderful dryer! As one homemaker to another I suggest you check it out. Never had one I liked more.

Maybe they make some higher end ovens but ours was not one of them. The oven light fixture works intermittently and its only been 8 months that we have had it. The insulation on the oven is lacking as well. You can turn the oven off at 450 and within 15 mins its already below 200.

Whirlpool Duet $1300, in the past we had great service from other Whirlpool products. Just a more modern look and knowing it was a company we had used in the past with very little or no problems so we expected the same only with energy and water savings. We are energy aware and believe in conserving energy and water where we can. My wife wanted to stick with the brand that gave us good service in the past and chose one of their most conservative units on the market (I believe it was based mainly on looks). What burns me the most about this unit is its constant consumption of clothing, the repair guy found nothing askew with the unit and suggested smaller loads. So we reduced the load size smaller and smaller till we were washing each outfit separately and guess what, it still ate clothes, just chews them up.We lose about a hundred dollars a month in clothing. This washer tears holes and shreds clothing on almost every load, I have to put shirts and lighter clothes to the back of the washer then load the heavier blue jeans and such toward the front and hope they finish in the same position or something is ruined. The fabric becomes distressed, stretched, shredded or has holes, or any combination of the above. We have taken to going to a laundromat or sending clothes to the cleaners. These units are three years old and we are now looking for a replacement for the washer because the local service guy won’t even come out any more. This problem surfaced within a week of the first use of the machine and has remained steady, as we are retired and travel a lot we are not always using them so they are what I would term very lightly used.

We have a 2 1/2 yr. old Whirlpool gas stove. We have had the mechanic here several times as it would not ignite. We also have had the control panel repaired twice as it melted. It is melted again but they will do nothing. I tried to clean the oven with their AquaLift technology and had to re-do it four times and still have residue which appears to be permanent. We are very frustrated with it. We have used Whirlpool appliances for over 40 yrs. but will not buy another. Model#WFG710HOASO, Serial#R21712236.

I bought Whirlpool Proton 3-door 18 months ago from a popular store at Chennai. I got a problem with cooling within 2 months. Service was availed and it got better. Same problem occurred again after 3 months of service, so I had it serviced again. Now the problem is its not working at intervals. I called the service and the person could not find any issues and says its working well. While it was pending resolution, the problem recurred and refrigeration is nil now. At the freezer, even after 8 hours, the water has not turned into ice and all food products have perished.

Whirlpool refrigerators are best whenever I used many refrigerators. It provide many useful service to users. It allow us to store different varieties of products including vegetables, fruits, beverages and many more. It can make cube ice for to use in different drinks, products, etc. It consume less energy to used this Whirlpool refrigerator products. We used Whirlpool refrigerator with less stress of storages of fresh vegetables and fruits. Water is main thing we used to store in this fridge, it maintain temperature well for cool and fresh taste of nectar of nature. Nowadays, refrigerator are used widely in our locality especially Whirlpool which I mentioned them earlier to buy this awesome product to give comfort of mankind. I recommend Whirlpool refrigerator.

This is the loudest washing machine I have ever had. Sounds like it is grinding. Called Whirlpool and said that is normal. Will never buy another one and will let everyone I know how noisy it is and not buy one.

Beware to those who are in the market for a new washing machine. I am reviewing the product not the retailer. The lack of the agitator on the machine has left the consumer very agitated! I have called Whirlpool in the first year at least three times for them to come look at it and see the pictures of the clothes. It rips but the response basically is, “It cant be helped maam.” Here is what it does: When you do a load of shirts the sleeves tangle so much your clothes rip You can do approximately 3- towels or it won’t spin correctly. A load takes forever! Now I have been doing laundry for over 40 years so I know how to do a load and I have never been so disappointed in a product I could not return, why you ask because they say there is nothing wrong with the machine. Dont do it! So Whirlpool get a 0 star rating from me but I have to give it one for this review to move forward.

Bought new from menards. Doesnt work properly, doesnt wash right and cleans poorly. It too bad because I thought I was upgrading from my old Whirlpool washer that was 15 years old so I order the new cogs for the agitator on the old machine and now using it again. Works better than the new one. Sad that whirlpool wont stand behind the product. Might as well be made in china.

Literally from day one I had an issue with my Gold Series which was aggravating but at least it was on warranty. Then 2 months out of warranty I had another problem, a leak. Now no water circulation. I think it is maybe 3 years old. What a piece of junk and my Whirlpool washer and dryer? Not much better. I will never buy another.

On May 15, 2017, I purchased a new Whirlpool Water Heater, unknowingly made by American Water Heater Co., from Lowes (receipt attached). Model Number ES40R10-55 with a 10 year warranty. The water heater was installed using the directions in the owners manual. Upon turning on the current to the water heater after it was filled with water and all air removed from the plumbing, the module gave a code stating the top element was not working. Called the Technician Assistance Hotline and they gave me a RA number to get a new top element from Lowes. Got that on May 16 and had to call the plumber that is contracted by American Water Heater Co. to come to the house and inspect the heater to make sure it was installed correctly.The water heater worked once the new element was installed. On Oct. 3, 2017, had more issues with the module stating the top element was not working. Called the Tech. Assistance Hotline and they gave me another RA number to get another top element. On Oct. 4, got the top element and installed it. The water heater started working again. On Oct. 6, the module stated the bottom element was not working. Called the Tech. Assistant Hotline and had the plumber come out. He determined that he could not find out why it was doing this and also said that both elements were good along with the element that I removed on Oct. 4, which I still had. Since then, the module has been giving codes stating that both elements are bad and I have not had any hot water since Oct. 7. American Water Heater Co., Whirlpool, and Lowes all refuse to give me a refund for this piece of junk! All blame the other for the problems and none will take any responsibility for the water heater not working. I will never buy another appliance with the Whirlpool name and definitely will not buy anything made by American Water Heater Co. I also will never buy another appliance from Lowes as they are not willing to help me in this matter. If you do not want to experience the headache and frustration of owning a new appliance that does not work, I would suggest that you do the same!!!

I bought a Whirlpool Cabrio 2 years ago and until last week it was fine. We got an error message that said we had to call for service so we called a local whirlpool repairman. The repair guy told us it was the control panel and it was going to cost between $400 to $500. He also said that he works on a lot of whirlpool washers and this is the first time he saw a machines control panel fail. He recommended that we call Whirlpool.I called Whirlpool customer service and after waiting on the phone for 40 minutes I was quickly transferred to customer resolution and was told that since I hadnt purchased the extended warranty there was nothing that they could do for me. I kept asking her, There is nothing that you can do to help me? And the consistent answer was no. I will never buy another Whirlpool appliance. This has been so frustrating to have an appliance that looks brand new and wont work. The manufacturer wont even try to help with fixing the problem. Amazing AWFUL CUSTOMER SERVICE.

Ive got a brand new house, with brand new appliances by Whirlpool. Within less than 6 months, my dishwasher, Model no. DU1015XTXB0 Serial no. F00702058, had its electronic board gone bad. Instead of replacing the dishwasher, Whirlpool replaced the part. Not even one year later the same part went bad. Now, the dishwasher is not even 18 months old and it will cost $255.00 to repair. It is just the two of us in our home and I bought Cascade packets 20ct x 5 at Sams. Im not even done with the packets, so I know 100% that we have run the dishwasher just 70 cycles in 18 months.

This was the first new appliance that I had actually ever had and I purchased it in October of 2010. After four months, it started make a grinding sound. I called Whirlpool and the repair man replaced the motor. Approximately four months after that, the lid got stuck and the machine would not respond. Same routine as before, but this time the transmission was replaced. While the machine was apart, I noticed the white insulating panel from the bottom was brown in a spot and looked as if it had gotten hot. A month before the 1 year warranty expired, the washer started making an intermittent grinding sound nearly identical to the sound made when the motor went out. This time a different service company was sent out my Whirlpool and the said that nothing was wrong. Now, the machine is out of warranty and has stopped cleaning close and during the spin cycle the you can hear water running into the machine constantly. Last months water bill shows a 40% increase in water consumption when nothing has changed to incur a larger bill. Seeing all these comments makes me wonder why the heck nothing is being done to force recalls on such poor products. Consumers should be treated with a lot more respect than this. I will never recommend a Whirlpool product to anyone I meet. In fact, I will strongly discourage anyone who is contemplating buying a Whirlpool washer machine.

The door broke down twice and taking months to repair. We bought the model WMH53520cb in 2017 April and since then we had issues with the door. Even the door is closed the microwave doesn’t turn on. The latest issue happened on Jan 2018 and still not been repaired. Seems like they are waiting for my one year warranty to expire.

On July 19, I was forced to buy a new washer. Bought a Frigidaire which, when connected to the water supply, started immediately dumping water into the drum. Sent this defective washer back to the retailer and chose a new Whirlpool. O-M-I-G-O-S-H! It was delivered on 25 July and despite having 4 temperature settings, it only worked on either hot or cold AND you could never tell what temperature was going to be chosen by this computerized wonder. I repeatedly called Customer Support and received three different answers on what temperature was considered warm. The answers ranged from 65 to 102 degrees. Also, you could open the lid when the water was running in, which washers are no longer supposed to do. Whirlpool then arranged for A & D Service to come and repair my NEW washer and scheduled an appointment for a week later. I was forced to call that company to find out if they were even coming. When they did not show as promised, I cancelled the appointment and called Whirlpool to ask for another service company. They then scheduled me for two weeks later (now August 30th). The guy did come and told me there was user error - I had used too much soap as this was an HE washer. I asked him to show me where on the appliance and in the owners manual that it stated the washer was an HE. He couldnt find it either and said he would replace the computer and the door lock because his computer found that the washer was hit and miss on anything it was set on. At any rate, it is a little over a week later and I have heard nothing from the repairman and, of course, no follow-up from Whirlpool. Do not make the mistake of buying any Whirlpool product, and that now encompasses names such as Maytag, Amana, Jenn-Air, Kitchen-Aid and many more if you want to be assured of a quality product and excellent customer service. What if this had been a refrigerator? The whole debacle has been a nightmare. Wish I had bought a GE!

Sears, Whirlpool Cabrio Platinum washer and dryer purchased spring of 2013. I thought this would be a good combination to purchase quality appliances that would last for years. NOT! These machines are used by my wife and I only. Washer: Bearings go out. Repair: Replace tub and bearings. Quote: These things arent made to last more than about two or three years. Another quote. Do you notice that your clothes arent getting dry? Yes. Yeah well, you have to use the timed dry setting because the regular setting shuts off as soon as it senses one piece of clothes is dry and leaves the rest of your clothes damp. DO NOT BUY.

Purchased washer 01/20/2012 after prior bad experience with washer, purchased from Sears. The washer is two years old and began making an awful noise and quit spinning the clothes dry. I too have had problems with getting service and cant see spending $500.00 for repairs on a washer that cost me $653.81 to purchase. Whirlpool and Sears better take their head out of their bum before the completely decimate their customer base. Why arent these problems being fairly addressed? It says a lot that your original warranty is only a year and any additional warranty is cost prohibiting. Save yourself some money and frustration and buy the old fashioned top loaders with standard agitation. AND WHIRLPOOL CAN AND SHOULD BUY A VOWEL AND REALIZE THAT IF IT DOESNT WORK IT ISNT MORE EFFICIENT!!!

I purchased a Whirlpool gas stove model #WFG540H0AH from Sears in March 2103. Since that time, the oven has repeatedly broken. After two major repairs, the repair company said the fas venue (?) suspect board was defective and needed to be replaced by the manufacturer. After 3 weeks of back and forth calls with Whirlpool customer service, the only solution they provided was for me to purchase a new stove at a discount with no compensation for installation, the gas connection kit, or haul-away of the old appliance. The original stove cost me $1100 including the installation, haul-away and taxes. The replacement option would have cost me $800 and still did not included haul-away, the gas installation kit, or taxes. Hardly an affordable solution. Whirlpool at no time addressed that a part on the stove was deemed defective.

It started getting warm and wasnt getting any warmer. Model number ED2VHEXV001 22 cubic feet side by side. I read another review and it sounds just like mine, OMG. It better just need something, its less than three years old. I am not happy and I always bought Whirlpool, my first trouble with it.

I have a Cabrio washing machine that is just barely two years old. I have already spent over $500 on repairs/service calls. The first repair was the drum which cost $300 + to repair. Typically, my experience with washing machines is I buy a new one after years of service simply because I want a more updated model. I just bought a different brand to replace the Cabrio as it has another broken hinge (one rusted out. How bizarre is that?) And it wont work on some of the choices for cycles. The first time I called whirlpool, they were totally unresponsive and told me there was not any problems with the machine even though the part I needed was on backorder for three weeks. I have never been so frustrated with a product I thought was a reliable brand, not!

Its a big buy to decided on fridge, bought one last year and the drawer keeps popping off the plastic piece. Who designs these to where the piece isnt long enough to stay put. The Veg filter in the back came broke so it doesnt stay on. Just upset to pay that much and have a really cheap product.

I purchased Whirlpool only front load compact washer in June 2015 and lasted only a year before the door lock broke and getting F6 error that means mother board to be replaced. Whirlpool warranty department (AIG) did not bother to do a complete repair and offer buy out at a 75% of my purchase price. My five year warranty premium cost was not refunded. I do not recommend this model be purchased by anyone. Whirlpool washes its hands on the quality and reliability of its product in US and that is a shame! A service life the unit should be at least 9 years with affordable maintenance cost.

Do not buy Whirlpool or Maytag appliances. They do not stand by their products. We have purchased 2 washing machines in the past 8 years. Both of them quit or broke almost as fast as we got them. The customer service agents were pleasant, but they would not help us at all. The machine we purchased has a design flaw that they will not acknowledge. They have been contacted by us several times and cant fix the problem. They need to correct a design flaw that is in all their machines.All of our clothes get encircled around the agitator and the machine gets off balance. We have to untangle our clothes from the agitator and pull them apart by hand. They make bad products, including a Whirlpool refrigerator that broke within a month of us buying it. They care about selling these crappy machines. Buy a GE, Bosch or LG. You will get a machine that works properly as soon as you hook it up. We have had their representative out several times to our house and they could not repair it. The repair techs have told us that Maytag and Whirlpool clothes washers are no good.

Bought this because it was a Whirlpool product and liked how it was supposed to work at the store, HhGregg in Downingtown. Anyway one week in we started having problems, clothes not being washed well, and constant problems of dripping wet clothes, like they were never spun at all. Would have to readjust all the clothes, respin, most times we have to that that every time we wash clothes and have to respin more than once and even then, clothes have too much water left in them, so it takes forever to get our clothes dry. We have a service contract with Sears, we have repairmen out a few times. Get told, dont wash towels in it, only do very small loads, supposed to be a large capacity washer, nothing wrong with it. Now its worse than ever, terrible product. I want a different washer, its rusting at the lid, its only at the most 2 yrs old, it was expensive and am very, very frustrated!!! I want what I paid For!!! Whirlpool, shame on you for putting out such crap.On to my next problem with a Whirlpool range, again bought it because it was a Whirlpool. We had our Kitchen remodeled and the range I had was white. We needed a stainless steel range, Bought the Gold series AquaLift convection oven. This is the most horrible piece of crap. The convection oven does not cook as a convection should, food takes forever to cook on convection, reg feature works faster and hotter than the convection. In my old range I used the convection feature always unless I was baking a cake. Then used the AquaLift feature to clean my oven, it was not dirty , but I like a sparkling oven, so followed the directions, set it to clean. It looked the same after it supposedly cleaned the oven. Nothing was cleaned, tried it again, it was a little more dirty, something had spilled. I wiped out the oven, used the AquaLift self cleaning feature again, same results, old oven, self clean, the oven after a cleaning cycle, only ash was left, wipe it out, it was spotless. So I called for repair, the repair guy was here about 5-6 different times, tried this and that, replaced a heating element in the oven, turned the temperature up in the oven, so now when I bake, I have to figure out what temp I need to put it on. Tried that, even admitted that the AquaLift feature was a bust. I contacted Whirlpool, I want it replaced with a different model. This range is about I and a half years old, want to replace it but again was very expensive. Its a terrible product, it cant be a coincidence, that both newer appliances made by Whirlpool are terrible!!!! Combined they cost me almost 3000.00 dollars. I feel that I have been ripped off definitely did not get the great products that I thought I was buying. No response from Whirlpool, no satisfaction. I want them both replaced or my money back, take them out of here, they are useless!!!!! I will NEVER buy another Whirlpool product again, and have told everyone I know about the terrible quality of these products.

Purchased a washer on 8-29-2010. On 2-15-2012 transmission went bad. I called Whirlpool, they will not stand behind the product and wanted me to buy a warranty and then they will come out and repair the machine. Great customer service. Build a bad appliance and get the customer to pay for warranty. Do not purchase Whirlpool.

I have a Whirlpool Cabrio washer. It was great for almost year. After that it has been nothing but trouble. The body of the washer has rust coming through the paint and large areas that is so rusted that the paint has chipped off completely. A washer is expected to deal with water and not rust through the body. I have a 10-year old Ford truck without a speck of rust. Dont they undercoat? The circuit board has had to be replaced because of rust. I have to take several Q-tips and go under the cover to remove all the rust if I dont it gets rust stains on my clothes, which is impossible to remove. The customer service is non existent. They have left me on the line for over 40 minutes. I hang on only because it would be another hour or so of my time to get someone to answer. I was without a washer for a month while waiting for parts. Why dont they have parts for their products? I had to slop my way too dirty laundry mats 3 times a week as I do 2 to 3 loads a day.My washer is downstairs and stops and gives me the unbalanced message even when its not, running up and down the stairs several times to complete one load. I also get the F51 message for no perceivable reason. The extra rinse button only works 1/2 the time. This was an expensive washer ($1,000.00) and I feel that I deserve my money back. They are knowingly making an inferior product.

This is the only time in my life when I have seen a Microwave behave so badly (and one that is relatively expensive). The microwave is defective out of the box. Seems like there is a comWhirlpool MWA269 (4You)mon trend with Whirlpool products and cheap Chinese boards. The microwave never stops working once the timer runs out. It will just keep going. Model is Whirlpool MWA269 (4You).

I paid a lot of money for this because I thought it would be high quality and last for quite a while without problems. First of all, you HAVE to open the right door before the left door and then remember to ALWAYS close the left door first and then the right door. If you dont the doors dont close well and your refrigerator gets hot AND THERE IS NO BUZZER OR ALARM TO TELL YOU THE DOORS ARENT CLOSED. After 2 years the freezer repeatedly freezes up and then the refrigerator heats up. My repairman says the controls on this refrigerator are WAY odd and instead of just buying an inexpensive part (defrost timer for example for $50) he need to order the entire control for probably 3 time more. NOT WORTH THE MONEY OR TROUBLE. BUY ANYTHING OTHER THAN WHIRLPOOL GOLD.

Whirlpool Gas Range WFG540H0es - Purchased 2 months ago. After 2 weeks there was a spill. The black burner caps are powder coated. After cooling we washed it with dish detergent & a sponge. The powder coating came off. Called the company. They replaced burner caps. Last week there was a spill and it stained the burner bases which are powder coated in a silver color. We tried 409 cleaner, Windex, dish detergent with a sponge. Could NOT get the stain out started removing powder coating. Called the company they ONLY guarantee cosmetic appearance 30 days. They wanted $139.00 for a new set of burner bases. I am going to go back to Lowes & see if we can return this Whirlpool range.

We bought our washer (Whirlpool Cabrio) from a rent to own company about 2 years ago, and finally got it paid off. About a week ago, the lid started sticking when it was done washing. I went to open it last night to start some laundry, and it BROKE. Now theres a piece stuck in the bottom part of the lock, and the washer wont start. Anyone else have this issue?

Washing Machine Model WTW4616FW - I purchased this machine at Home Depot after I had to return my Samsung Costco machine that was recalled due to the glass top flying off. I was attracted to it by its simplicity in design and price. I have had it almost a full year and love it. I like that it has the deep water wash for over-sized items and a full-sized agitator. I was shocked that it was actually Made in America. I highly recommend it and I hope they keep making this reliable machine that gets the clothes clean. Awesome machine without the bells and whistles that I dont expect to breakdown. Way to go Whirlpool!

I have double door Whirlpool refrigerator 1.3 years old. Since last 1.5 month I face problem. 4-5 times their technicians done visit. Following observations done by them: 1st visit problem - Water run away from back side bucket. Solution - Due to atmosphere moisture. 2nd Visit - Cooling fan not working. After 2nd visit refrigerator not worked. 3rd visit - Compressor fail. 4th visit - replace compressor. After replacement, refrigerator outer surface become heated. Skin will burn if anybody touch refrigerator. Problem still continue... I pay 2000 rs to Whirlpool as per companys norms. I lost my frozen, milk, veg., fruits etc. of approximate 1000 rs.

I bought the Whirlpool mini frig from Target 3 years ago thinking it was made by whirlpool in USA!!!! 1) not really made by whirlpool!! Made by Glantz from China. Common deception of USA and Chinese mfg to fool consumers is to license a well knownBrand to glantz in china. Glantz mfg almost all mini frigs under dozens of well known brands. Federal Trade Commission should ban this kind of deceptive marketing. Complain to the FTC Wash DC!!! 2) Chinese mfg gantz mfg defects and how I fixed them: A) back of freezer compartment open, freezer does not freeze B) 45f inside not 40f!!! C) defective thermostat remedies: 1) aluminum foil to seal back freezer 2) weather stripping around door to bring temp from f45 to 40f.D) used Youtube video to adjust defective thermostat, until I can find a replacement thermostat!!! Dys videos: watch youtube repair videos before you trash your frig. 2) check the country of origin, if its made in china, it will not last very long!! 3) buy an extended warranty for any chinese product. You can buy generic frig replacement parts on eBay!!Yes chinese products are cheap, but they do not last!!! One good thing!!! This is a very quiet frig.

I purchased my Whirlpool Cabrio in November 2009. I am just four months shy of the two-year mark and it is dead! I paid a lot for the machine because I thought it was worth the investment. It was not mistreated in any way! The problem is in the computer part of the machine.Everyone knows that to have a repair person come out is costly in itself, add to that repairs and parts, and it isnt worth it to fix an appliance most of the time. I will never purchase Whirlpool again. Never. I could have bought three cheap machines for this one Whirlpool, and had a couple of backups in the event that one quit on me! Now I have a fancy washer and a mountain of laundry!Thanks, Whirlpool.

Whirlpool claims this technology works to clean the oven; however after one month of use and one casserole spill, we attempted 3x to use this system and the cleaning process was a total failure. The gravy spill on the bottom and mild oil residue on the sides from roasted vegetables was the same as before the cleaning cycle was tried. The cleaning kit accessory from the company was a joke. It consisted of 2 sponges and a small scraper! We purchased the slide in model WEE745HOFS. Buyers of any and all Whirlpool products with Aqualift BEWARE... It does not work. We have since replaced the product with a range with the traditional cleaning process system that has worked for decades in most major brands.

We purchased a Whirlpool dryer almost three yeas ago. Its a front load, steam dryer--or WAS should I say. Almost a year ago, I was unable to calibrate the control panel (in other words, to change the cycle). Ive been advised by the tech that I need a new control panel $200. Really Whirlpool??? A $500 dryer that lasts two years?

After yet another frustrating round of laundry I have to write this. This has been the worst purchase (Cabrio 6800 Washer and Dryer) Ive ever made. Like other reviewers, I thought I was buying a high-end (high priced) product that has performed miserably from day one. Clothes do NOT come clean and for some reason, towels and dishcloths get ripped and shredded. All cycles (except sheets/towels) do not dispense enough water. Of course the one that does, results in the ripped and shredded problem. A little more than a year after purchase, we got an error code indicating the computer board was bad. Code would come up during initial cycle start and again at the start of the rinse cycle. Whirlpool basically said tough luck but shortly after, we started receiving offers in the mail to purchase an extended warranty for $175. Out of principle, I did not do this. Instead we discovered that we could push pause/start/pause/start multiple times and it would eventually keep going. We are still doing that on EVERY load of laundry (start and rinse cycles). I am not far from just biting the bullet and buying a new washer. It will not be a Whirlpool. One positive note is that the dryer has performed well, unlike some of the other reviewer experiences!

I purchased a front load washer and dryer brand new. The washer is under a 2-year warranty on all parts and labor. Since I have purchased them, the washer has had to be fixed on several occasions. I have had 10 parts replaced and had to be out a washer for a month at one given time. I have had the repair company email me all the parts and services that they have done. All I want is a new washer! I have argued with Georges Appliances on several occasions because I believe they sold me the obviously faulty washer and I dont believe that I should be responsible to have to figure it out for myself. They should be responsible to provide me a new one. They told me that I had to contact Whirlpool in order to receive a new washer. Please contact me asap.

Rust around the inside of the top of the washer. They do not use stainless for this part of the washer. It is some sort of cheap tin material that will rust in less than the first year. They have gone cheap on building but still think their products are worth the expensive price they ask. Do yourself a favor, pop the lid and look under what they do best to hide and also they removed the pop down door on the dryers so you cannot vacuum out the excess lint build up. Tragic lint gets hot and starts to burn in the gas models and stink. They should be ashamed of themselves. They have bought up most of their competition and now they have gone cheap on product production but not on price.

I purchase a WP Fridge only unit model WRF578 18D MOO in July 2016. I woke up 3 months later and my fridge was filled with rotten food, the internal temp was 16 C 60.8 F. I phoned Sears and they had me phone WP. They tried to repairman but he phoned and told me that he could not service my fridge as he was a 3 1/2 hr and one Ferry ride away from me - He was in Whistler and I live on the Sunshine Coast. I phoned WP again and they sent someone who actually lives here. He found and repaired a small freon leak. Four months later it happened again, the fridge was also making loud noises when the compressor started and stopped. I phoned WP again. They sent the same repairman, he ordered and installed a new compressor and topped up the freon. Sadly less than 3 months later it happened again. This time I was very firm with WP that I was unhappy, they extended my warranty for a further 6 months. The same repairman again came and topped up the freon. That brings us to this week. On Wednesday June 14 I woke up again for the fourth time to a fridge full of rotting food. The fridge was actually warmer than my Greenhouse that day! I phoned WP. They were unwilling to help so I asked for a supervisor. She offered to pay 1/2 of the service call as my warranty had expired Jan 26/17. I said that was unacceptable and asked to speak to her Supervisor. She stated that she was as high as I could speak to, so I asked for an e-mail address for her supervisor. She instead tried to tell that I had no warranty and that they had already fixed my fridge 3 times and given me an extra 6 months on my warranty and offered for me to BUY an extended warranty! I replied that if my fridge were fixed I would not need a service call and that in fact my fridge had never really been fixed. She transferred me to another person. He offered to pay for the service call. I accepted. He asked if I were happy, I said that I would wait and see after the service call on Monday. I Asked if it were the same Man, he said that violated his Privacy. I said I will see him Monday! Will he be wearing a disguise?! Kohuch (the Service guy is coming over this afternoon -Friday) my Husband left work early to be here.

This Whirlpool fits in a 1962 brick split level kitchen perfectly. It is both beautiful and runs as hoped. It has a bottom freezer, allowing the top portion to hold a full Thanksgiving and Christmas turkey platter. I love this Whirlpool. It is also made in America!

Microwave Model # MH1150XMB# - I have had this microwave for 6 and 1/2 years. It came with the condo I purchased. Shortly after I moved in, I noticed hairline crack in the frame near the handle. I have replaced this door once and now the second door has done the same exact thing - formed these hairline cracks in the door frame. This is a defective product and needs to be taken care of by Whirlpool. But you keep denying the problem. No one can afford to replace a door every year. The microwave still works, but the door has fallen apart. The remainder of the microwave works fine.

Extremely disappointed in Whirlpool oven! Built new home and this was recommendation by BAC Appliance. The oven does not self-clean well at all, and my spills are minimal. Deposits between glass doors that cant be removed. Oven is barely cleaner than before I cleaned for full cycle. Oven suddenly shuts off for a short while and then restarts. Steam comes when using lower oven and removes finish on upper oven. I expected Whirlpool to have a quality product. Definitely not! BAC really had no answers for me.

We purchased KitchenAid Model YKESS907SS05 Electric Range from Appliance Canada April 2012, just before we took possession of our new home. We began using the range in July of that year and it worked well until September 11, 2014. At that time we decided to use one of the features of the range which is the self-clean feature. During which the control panel failed and our oven ceased to work.We contacted Appliance Canada and they suggested a technician come to assess. We called the suggested number and they send a technician that was not Whirlpool certified and we had to pay out of pocket for the visit $158. He did absolutely nothing during the visit. We then called Whirlpool Canada and they informed us that he was not Whirlpool certified and to call Appliance Canada, we immediately called Appliance Canada and made arrangements to have certified technician come to assess. Whirlpool Canada also indicated at that time that the board that failed was still under warranty and we should not have to pay. September 22nd the second technician came to assess the situation, used tape to cover the front blowing air duct so as not to have the hot air blow back onto the control panel. This was a temporary fix, they ordered a control panel in the interim that they would then use to replace. The control panel came in October the 22nd, was replaced and the new board was faulty, put old one back in and re-ordered another board. The part was on back-order. By mid November, after numerous calls, we called Whirlpool directly. They authorized that the technician to get the part from another supply source. On November the 26th, technician came back - tried new board could not get it to work, left it with us and ordered additional parts. At that time the technician who was taking the case had a family emergency and would not be able to come back out until the new year. Subsequently, Appliance Canada authorized a new company to resume our work with a new technician (Toronto Appliance). He came out December the 17th, with the board that was left behind, he was able to get the oven working. December the 22nd while in the middle of cooking a meal, the oven failed again. We called Appliance Canada and they had a Technician scheduled to come December the 24th from Toronto Appliance. However, on December the 23rd the oven resumed working. The Technician came on the 24th but because the oven was working again could do nothing. On December the 31st, while dinner was in for guests, the oven failed yet again. We called Appliance Canada, yet again, and they scheduled another visit with a new control panel and additional board. The technician arrived again today, January the 28th, and could not get the stove working. He was instructed to order an additional part and we are to wait another 2 weeks. In total, we have been waiting for 4 and a half months, we have also been told that we were not to have used the self-clean as this causes these types of problems. Why is it offered, in addition, Whirlpool has not supported our direct calls, nor authorized the replacement of a product, that for all intents and purposes, is faulty. We have had no success in the resolution of this issue nor support to reach a resolution from all parties involved. I would suggest not buying any product from those involved as their lack of support for their product is appalling.

Have a warranty with them to get reimbursed for repairs for a year. Have had to use it twice now for the same part. Customer service told me itd take two weeks to get a certified repairman of their choosing to be reimbursed. Two weeks to go without a fridge is their solution and they have no other repairmen working. So I ask to speak to a supervisor and the representative tells me she wont transfer me out because thats the way it is. Paid out of pocket to get it fixed immediately instead of waiting.

The washer and dryer, Cabrio, machines are not even 4 years old and Ive had to repair four different things! Literally just replaced idler pulley today, went to put a load in wash and F1 code appeared. Control panel, 350.00 for whirlpool or a technician to repair! 285.00 for part. I called Whirlpool and was not offered any apology. Never again will I purchase Whirlpool crap appliances!

Purchase whirlpool washer model W2W4800xQ2 in Sept. 2012. Had problem with lid lock after warranty. Now lid lock does not work, takes 1/2 hour to start wash and does no spin. Called whirlpool and they will do nothing. Repair will be $200. I opt to just purchase new machine. This machine is one piece of garbage.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

I bought a frost-free deep freezer 2 years ago from a box store. Within 1 year it went out and I lost approximately $1000 worth of food. Called the box store and they called A&E. Bought the extended warranty. A year later the deep freezer went out again. Lost another $1000 worth of food. Im scared to death to use my Whirlpool deep freezer again. Am I going to lose $1000 worth of food each year? No satisfaction with Whirlpool whatsoever for this piece of junk. And the problems were manufacturer defects. In fact, one of the parts had a recall on it and we were never notified. I dont know about anyone else, but I cant afford to just throw away $1000 worth of food every year. Ive bought my last Whirlpool appliance now. I wish I had read these reviews. It would have made a difference to me.

Whirlpool has always been a quality product in my household. I had Whirlpool microwave prior to the one I recently purchased. It lasted 10 years and was used frequently and always on daily basis. It worked like a dream and I would never purchase any other brand!

Friends and family dont you ever dare to buy a refrigerator from Whirlpool - Best Buy!!! They sold me a defect refrigerator and after 2 months begging to see a technician, they are telling me that they are going to fix it. Im so tired of them trying to fix it. Theyve been here 4 times with no luck. All my food is rotten and frozen. And its a new refrigerator. Gosh. As you can see, the water in the plastic cup that I left in my refrigerator are frozen which is not supposed to happen. I feel that Im dealing with nonsense. They dont care. They just took my money and thats it. Im left with a new defect refrigerator that doesnt work. Ridiculous.

I have recently installed a Whirlpool water heater and was thankfully home when I heard a pop sound and my water heater had exploded inside. The heating element also caught fire. I called customer service and was not satisfied with the response from their customer service team.

We bought the dishwasher on 12/28/11. It broke 4 weeks later. I had the company come out to fix it. 6 months later, it broke again, needed a whole new control board. 3 months later, it broke again, they came out and did some type of repair. 7 months later, it broke again and it needed a whole new control board. They wanted to charge us $250.00 for this, but after some major arguing in regards to how New this was and the warranty now out, they waived the fee. 3 weeks later, the same problem as before! I am so angry about this lemon of a dishwasher! They are coming out again today! I am quite sure they will need to replace the control board again! I will never buy another Whirlpool product.

I love my glass top stove and glad I purchased it, so much easier to clean, I think they should all be made self-clean on any stove, I did not notice that some dont come with it and some dont. Remember not to start cleaning the top of the stove until you can touch it with your hand.

My $800 Whirlpool Cabrio top loader does not rinse the soap out of the clothes. Nor does it even get the clothes completely wet. After the final cycle I have soap scum in all the wrinkles of the clothes. Most dissatisfied purchase I’ve ever made. The one-star rating comes from the pretty blue digital displays. I’ll be purchasing another; this one goes to the dump where it belongs!

Totally worst experience with Whirlpool fridge with 1 year of the purchase. It started having cooling issues. Also it was making noise. When contacted for its replacement the company did not agreed for the same saying would provide free service within warranty period however after that customer will have to pay. Quality of product (shelf life) is too bad in context with the company it belongs to.

We purchased a Whirlpool Duet Front Loading Washer and Dryer. The control panel on the washer went out in March. We called for a repair. The repairman came, told us we needed to replace the control panel and he would order it. My American Express was charged $389.91 on March 26th. I called today, April 9, asking about where the part was and when my machine would be repaired. I was told the part would not be available until July 11, 2013. I cannot believe that a company would expect a customer to wait nearly four months for a part as well as charge them for the parts and labor four months ahead of the part. When I called, I was first told that there were 15 parts in stock, but then was told that there were not any available to me. I have cancelled the service but it will take them three weeks to credit my card back for the part.

First one had major problems. The bladder they call it. They took out the whole system out, replaced the tube that goes to the top of the refrigerator which is where it always starts leaking so they worked on it three times, junked it, gave me a new one and here I am again same thing. Ruined my hardwood floor and Im stuck with it. Never again will I buy WHIRLPOOL.

I replaced our old 50-gal water heater (10 years old) with a new top-of-the-line Whirlpool 50-gal water heater in Feb 2011. The Friday before Memorial Day, the heater went out and the pilot refused to stay lit. I called and jumped through all their hoops and finally figured out that it was the gas valve, because the pilot goes out as soon as you release the button and the milli-voltage reading is ok. They sent me a replacement and it cost $145 to have a plumber come out and install it. We were without hot water for 5 days. Now 9 days later, the pilot keeps going out. This time I can re-light it, but after the water heats up, it is apparently going out again. They refuse to replace a 12-year warrantied water heater that is only 2 years old and I am going to have to hire a plumber again to come out and attest to what we already know. This water heater is extremely loud. When we had it installed, I read the reviews and there were similar complaints (sounds like a mini jet engine). We dont seem to get as much hot water as we did with our old builders grade heater. This is a bad buy and I would advise anyone looking to purchase to look elsewhere.

We bought my Whirlpool top loading washer and dryer back in 2005, and they have not disappointed. Apart from needing a heating element replaced due to poor ventilation one time, both machines are extremely dependable and wash our clothes quite clean!

I purchased my stove in June 2020. I had no idea it was to be connected to the internet, but no big deal. Had I known of all the other quirks I would have thought twice. 1: A red light comes on to tell you a burner is on but not which one. 2: A red light appears when a burner is hot but it doesnt show which one. 3: Only 3 burners out of 5 can be used for cooking the other 2 are warming and melting ONLY. 4: The stove updates its software whenever it feels like it and shuts off the oven and burners. 5: Periodically I have the oven on and it just turns itself off!6: The touch controls for the oven are in a bad spot because if you accidentally touch them when the oven is on the oven will shut off.Not sure if it has any serious problems just the inconveniences listed.

The beat goes on. My Cabrio washer is still down. After working for a mere 14 months, the control board died, and the machine would not spin out water. The repairman ordered a new one. Though the part arrived several days earlier than predicted, the repair service said they could not send anyone out, until our scheduled appointment. At last, today, the repairman arrived. I am ready to start whittling down the mountains of laundry we have stuffed in every closet. Some areas of my house are starting to smell like a locker room. It is not convenient for us to haul everything to a laundromat, or impose on a relative who lives nearby.The repairman was in the laundry room for at least 45 minutes, and then very apologetically tells us that the part is bad. It will not work at all. He has ordered a new one, and requested rush service, which I think they will ignore. I cant help but think these parts are manufactured somewhere outside the USA. Well, listen to this Whirlpool, I would rather pay $25 more for this part, and have your washing machine work. Dirty laundry might seem unimportant to you. It is not unimportant to us! If you cant do better than this, make something else. I am furious, and will spread this news to everyone I know, and I will report on this situation again.

We purchased the unit in March, by April it wasnt cooling. In June it shut down. In July after 8 tech appointments and repairs. Whirlpool finally said they would refund my purchase and I should see the money in about three weeks. That would be about a week longer than the refrigerator worked. I dont have the money to just get another one so I guess the family will be without a refrigerator for another month. That means shopping every day for perishable for a family of 10. I would not recommend another Whirlpool product. This is no joke, every time I called them one of the first things asked was Did you get the extended warranty? Why would they ask, sounds as if they dont trust their own product either. This unit was purchase online through Sears.com. Purchase price was $2299.99. Order placed on March 4, 2017.

Whirlpool side by side - What more can I say? A 1-year warranty is all Whirlpool can afford to give anyone since the compressor broke a few months after. They are paying for parts, but we are paying $300 for labor to fix a $1,200 fridge... in addition to having to be without it for a month, losing defrosted food, etc. Fortunately, the dealer gave us a loaner.

Bought a Maytag Bravo XL Top-Loading Washer Model MVWB880BWO. It was installed on Jan 22, 2014. In December, the spin cycle became very loud. I contacted Whirlpool on Dec. 2. They said a local technician would be out on Dec 5. They make up this date. I called the local technician. They came out on Dec 16. I was informed that if there was nothing wrong with the washer, I would have to pay for the service call. The tech. found there was a bearing problem. He said they would contact Whirlpool about the warranty repair. Had not heard from the repair shop. Today is Jan 5. I called the local repair shop. They said they were waiting to hear from Whirlpool. I called Whirlpool. (Thats another nightmare). They said they were waiting to hear from the tech. The man at the repair shop said he has been trying to get a hold of the rep for our area in Eureka, CA. Apparently he doesnt return emails when he is in training and apparently he is in training most of the time. It is totally unacceptable to have to wait for over a month to have a washer repaired. Not sure what a consumers recourse is for getting something that is under warranty repaired in a timely manner. Maytag used to be a good product. Since Whirlpool produces the Maytag, the quality just is not there. Very poor service. I would not recommend buying Whirlpool. You will not be happy with their product or their service.

I bought a Whirlpool Duet Front Load Washer in 2008 and it began showing F71 and F70 error code in 2011. I paid approximately $1,000 for the machine. The washer wont finish the cycles and often wont start. When I press the power button, I hear the 3 beeps and after a while, shows the F71 error over and over. The information I gathered online indicates that many people have the same problem. The repair cost is at least $550 to replace the user interface circuit board and is no guarantee. This is ridiculous.How could GE sell consumers this kind of junk that fails to work only after 2 years. I had a top loader for 12 years with no problems, not a single repair call. My wife and I are extremely frustrated with piles of dirty clothes and no washer to clean them. I want GE to refund the cost of the washer on a 10-year prorated basis. This is only fair.

We purchased in July 2016 from Best Buy. Very nice product. Our former Whirlpool had lasted 20 years and was a work horse for our family. The new one began not freezing ice cream in November. Then, it would periodically freeze things very well and then not freeze items fully. We contacted Best Buy thinking we had a lemon. Worthless - no help. Told us to contact Whirlpool directly. The repair person came out today and told us that our refrigerator cannot be in our garage outdoors because the energy efficiency of the refrigerator causes it to shut off when the surrounding temp drops below 54F. Our former Whirlpool had been outdoors in our garage in that spot for 18 years, no problems. The new models now no longer operate if the air cools down around them. What!? There is no warning information, no sales information, no way to learn this until after you shell out 1000 dollars and lose your frozen food. It is in the manual in fine print, but we didnt read the manual cover to cover when we got the refrigerator, and we sure didnt read it BEFORE we bought it. And no one at the store, nor the installation people who represented Best Buy as paid installers told me I couldnt have this outside, even though I specifically told them I was buying it for our outside extra fridge and freezer to replace the old one, and the installers installed it outside. Technically our refrigerator is working as its supposed to apparently. However, I think it should prominently be noted on pre-sales materials that it must be operated indoors only (in climates always >54 degrees). Now I have a new refrigerator that I cant use as an extra in our garage. Apparently all the new fridges are energy efficient like this and shut off below 54. I cannot find any info on the internet about this, or any other complaints about a similar situation to mine. How does that make any sense? Freezing is 32 so any frozen goods will thaw, by default, always, if the machine is in cool environments. Phooey on this design spec. Dumb engineers.

The wash machine is JUNK. We paid $2500.00 for our washer & dryer at lowes in 2012. I HATE IT from the start. It has destroyed most of my clothes. I hate doing my clothes. The water does not get my clothes wet, they dont get them clean AND the washer dont even get them wet. THEY need to do a recall or get us a lawyer. ALL the money I have put in this washer. The price we paid for them is a SHAME. IT is WRONG they are telling people that this washer is the best. They lie. I HATE HATE THEM.

I have a Whirlpool Cabrio washer (Model: wtw6400sw2 / Serial Number: cu0271913) and I am very disappointed with it. The spin cycle is the worst--sounds like a jet engine and gives me the UL error message of unbalance load. The machine was purchased in 2007 but was kept indoors. I contacted customer service and they advised me to contact the repair service in my area to get a diagnostic analysis of the issue. Hello! I already know what the problem is after reading all these reviews! I cannot tell you how pissed off I am. I will never purchase anything Whirlpool and I will contact BBB as soon as possible. Come on, fellow complainants, let us continue to fight to get a possible recall soon! We all have the same problem because this is a manufacturing defect!

I bought my refrigerator model #WRV986FDEM, in October. It has not made ice in over a month. I think its very unfair to purchase a product and not be able to use it. The technician has been out here twice and the situation is still not resolved. I understand that customer service is not a strong suit of your company but I am not a customer to be taken lightly. I paid almost three thousand dollars for this piece of junk and I want it to work properly. I find it unacceptable that the technician just left and the situation is not resolved. I will be posting my displeasure on every site I can today since I had to take yet another day off to accommodate you and your inferior product. ALL I WANT IS ICE from a fridge I bought 4 months ago. In the words of our illustrious president. Very, Very BAD.