GX5FHTXVB00 - Purchased fridge in 2009. In the second year the freezer got too cold and fridge was warm. Coils were frozen. Lost all food. Repairman replaced thermostat. This happened twice more with the same result. My warranty has expired, fridge is 5 years old and its happened for the 4th time. Whirlpool doesnt care since its out of warranty. NEVER will I purchase a Whirlpool appliance. They DO NOT stand behind their product!

Thank you EPA for requiring water limits on manufactures of washing machines. As a result, I am forced to use the deep water and extra rinse functions to get clothes half way clean. So much for saving water! This Whirlpool Cabrio machine cost way too much for such lousy results. Additionally, I have to purchase a special product and clean my machine every month or two. Ridiculous!! I yearn for the old days when I could wash my clothes and they would actually come out clean.

Whirlpool Cabrio top loading washer model WTW6800WW1 - I bought this washer 3 years ago. It cost me about $900. It has become very loud. I had the repairman here yesterday fixing my dryer. When he heard the washer, he told me the bearings are gone and its just a matter of time before the machine dies. To fix it involves a total rebuild of the motor, about $600! WTF! This is my 3rd washer in 19 years. There is something seriously wrong with appliance manufacturers. They no longer care about their reputations, and just produce crap! Expensive crap! Needless to say, I am now shopping for our 4th machine, which will be a Speedqueen basic washer with a 3-year warranty!

Before last Thanksgiving (2020) had installers set up this 3 door bottom freezer 2.4K new Whirlpool Fridge. It immediately froze almost half of the goods (big holiday foods). Whirlpool Tech showed up 3 times of 4 appts and could not repair. He said should work and now we froze Christmas Holiday foods. Different company of Whirlpool Tech was here was here twice, second time he ordered 4 parts and as of March 12, 2020, we can only use about half of our 24.7 cu ft fridge. For almost 6 months we have bins in our garage instead of the fridge...now our garage is too warm for bins of food. Whirlpool refuses to confirm this $24K fridge a lemon. We DESERVE more!

On July 19, I was forced to buy a new washer. Bought a Frigidaire which, when connected to the water supply, started immediately dumping water into the drum. Sent this defective washer back to the retailer and chose a new Whirlpool. O-M-I-G-O-S-H! It was delivered on 25 July and despite having 4 temperature settings, it only worked on either hot or cold AND you could never tell what temperature was going to be chosen by this computerized wonder. I repeatedly called Customer Support and received three different answers on what temperature was considered warm. The answers ranged from 65 to 102 degrees. Also, you could open the lid when the water was running in, which washers are no longer supposed to do. Whirlpool then arranged for A & D Service to come and repair my NEW washer and scheduled an appointment for a week later. I was forced to call that company to find out if they were even coming. When they did not show as promised, I cancelled the appointment and called Whirlpool to ask for another service company. They then scheduled me for two weeks later (now August 30th). The guy did come and told me there was user error - I had used too much soap as this was an HE washer. I asked him to show me where on the appliance and in the owners manual that it stated the washer was an HE. He couldnt find it either and said he would replace the computer and the door lock because his computer found that the washer was hit and miss on anything it was set on. At any rate, it is a little over a week later and I have heard nothing from the repairman and, of course, no follow-up from Whirlpool. Do not make the mistake of buying any Whirlpool product, and that now encompasses names such as Maytag, Amana, Jenn-Air, Kitchen-Aid and many more if you want to be assured of a quality product and excellent customer service. What if this had been a refrigerator? The whole debacle has been a nightmare. Wish I had bought a GE!

We have had the washer and dryer for over 10 years and they are still working great. We have had washers and dryers in the past within 2 years have failed, and repairs have cost us almost as much as a new one. Thank God for the ones we have now.

The plastic holding the vegetable drawers broke and now they are cracking because nothing is there to hold them in place. This fridge has a freezer on the bottom, which I like. Unfortunately, I had an Amana before this and it was wonderful- just old. I had to settle for a smaller refrigerator and that is part of the problem.

Whirlpool Energy Smart Residential Electric Water Heater - On top of this water heater is a junction box. If it goes out, so does the water heater. I am on my fourth junction box, at my expense on three of them plus the electricians bill times two. They finally sent me one free!

Never worked proper form the start, always condensation, bottom froze and top unthawed and vice versa. No help from store or company. During any temp change the fresh food would freeze and top unfreeze and no matter how long you waited and changed settings. Junk.

Whirlpool 5.3 Cabrio. This was the worst experience ever with a washing machine. My first cabrio did not work at all. My second one gave out after 2 weeks. It would not spin. I got my money back and would not recommend this washer.

Whirlpool Cambridge Model #WTW7300DW0 - Someone needs to help us consumers with this wash machine purchase being refund our money back from Whirlpool. It literally eats my clothes. I have 23 shirts that have pin holes in them and 1 shirt with large holes in it. I also have a ruined comforter and blanket. The comforter has soap stains everywhere which dont come out so its not cleaning the clothes, the blanket (which Ive had for over 30 years) was frayed one side, seam torn off - the piece never came out of the wash machine. I have pictures attached of the damaged. Its suppose to be Water Efficient - thats a joke! I do 1 set of king sheets. It runs for an hour and 20 minutes and fills water to the rim of the washer and does this twice. Id like them to pay for my water bills! Oh they came to service it only to tell me I was putting the clothes in wrong. The service company said I had to put the clothes against the sides and leave the middle open. They told me there was nothing wrong but consumer error. Well I did clothes today and aligned them like the service company said - 4 more shirts were ruined. Called Whirlpool today. They said they were sending someone else out to fix the problem and said, Unfortunately, we dont pay for damaged goods. Well from all the reviews I read Whirlpool needs to suck it up and recall this piece of crap they call a wash machine. Did I mention its only 1 year old, yea this is horrible!

The oven will not turn off. When I called Whirlpool and told them what had happened they immediately put me in contact with the safety division. My question is if it is a safety issue, why is there not a recall and why do I have to pay for the circuit board. If there is a safety issue why is there not a recall.

Front Load Washing Machine, Model WFW97HEDBD0 - This is the worst appliance we ever owned. Purchased in 2015, multiple problems since! 1. Soap dispenser did not dispense and leaked down the front of washer... 4 service calls, control panel finally replaced, clothes not clean, leaking continued. Had to place soap into washer drum. 2. Pedestal drawer made grating noise, track off, drawer replaced, opened better but still made irritating noise. 3. Grease oozing from side of washer both sides. Decided to look in back of washer and OMG! A copious amount of grease is also beneath & behind the washer & dryer. I had to scrape with a metal spatula device to pick up and it took over 1.5 hours to remove & clean. We are lucky a FIRE did not start when using either machine. This machine was a LEMON from the beginning. In fact when we were having it serviced, I stated I wanted it replaced but was informed 2 visits were counted as 1 and did not qualify for further investigation. We cannot rid ourselves of this machine fast enough after the last issue. New washer coming tomorrow, not a WHIRLPOOL! New machine is LG WITH 10 year warranty on motor.

Contacted Whirlpool - unit (Cabrio washer 7600xt) is out of 12-mo warranty. Spoke with manager, Tracy **. She said they would not help - out of warranty. Called local parts/service center - ea. hinge is $42 plus shipping and labor to install. Obviously this is a defective design. The lid is too heavy. I was having a difficult time deciding to spend 150-200 dollars every 2-3 years for hinges on a $700 washer and then I read all the other complaints about Whirlpool washers. I will sell it for scrap and buy a better brand.

What a horrible machine! From the day that it was installed not one time it gave me good cleaning. I spent so much money servicing it. Costed me over $700! I am done putting money into it! I am washing by hand! If you want a dishwasher where you can hand wash and God forbid your rinse with the machine (you will have to rewash everything) then this is the machine for you!

Stainless steel side-by-side refrigerator (4 yrs. old) - I have to continually clean the rust stains. Ive used the products Whirlpool has suggested and the rust continues to appear. Lowes extended warranty does not cover this problem because it is cosmetic; Whirlpool reps say its due to the coastal area where I live and that they cant do anything about it! I understand that there are many customers experiencing the same problems with Whirlpool products. Their customer service is worthless and is their warranty to stand behind their products!

I purchased a Whirlpool side by side refrigerator and it was delivered on 1/22/22. We had it five weeks working fine then on 2/27/22 it stopped working. Whirlpool service came out and said it was the compressor but all parts are on backorder and no telling when they will be in. Maybe Lowes would replace it, but no because it is longer than 30 days. Lowes when I bought the fridge had over 400 of the same refrigerator in stock so why is it they couldnt had replaced it. Or if Whirlpool sells items on their own why didnt they just replace it. We have been going on 3 weeks without a fridge. With all of this said it didnt even last the 7 years they say they last for now. That is ridiculous when the last one lasted 20 years. In 7 years I will be on a fixed income how am I suppose to keep living. Something is wrong here.

I went from an HE front loader to an HE top loader (Whirlpool Cabrio WTW7000DW0) due to the risk of mildew with the front loader. Im not the only one doing laundry and if someone else does it, it always seems that they shut the door when empty, contributing to moisture and mold that needed to be cleaned out of the gaskets. I am so unhappy with my top loader HE washer. When I stop the machine and look, I always see my laundry half covered with dingy water, sometimes part of it still dry at the top and it is disgusting. I frequently have to rewash loads due to detergent getting trapped in folds or pockets created that hold on to dirt and lint, even being careful with the detergent amount. I run the washer now every time with settings of deep water, extra rinse, heavy load and presoak with instructions, with settings taped to the top for others.At almost 1 1/2 hours each load, we just cant keep up. The laundry still forms pockets and sheets form a giant tent over the entire load that has to be unraveled at the end of the cycle and wound so tight it had no chance of rinsing. I had to get a repair person out because it got out of balance and he had a small hand-held computer to enter a code to rebalance it. When we discussed the issues I was having, he was ready for everything I was doing wrong. He told me I can not wash blankets or large items (I thought I was buying large capacity with such an enormous drum). He told me they have caught people adding water with a bucket during cycles and that the washer software can tell them if people are trying to work around the system which voids the warranty.Apparently, this is a common complaint he blames on the government wanting high efficiency so they make the numbers look good, sacrificing the ability of the washer to perform at what a consumer expects. I have never seen the water in my drum higher than a couple inches and the drum is HUGE, but never used to capacity. He told me his wife demanded they get a commercial washer because she was so angry about how poorly it cleaned. I feel so scammed and I wish I could have my old agitator back. $100 for the repair call, $150 for the code to be put in and Im on warning that they will see if I try to add water, run out of balance or dont comply with any reason they can void the warranty by just checking the data the washer is collecting on us.

We purchased 2 whirlpool commercial coin operated washer machines and both computer boards had to be replaced twice each - model CAE2743bqo and CAE27438qd.

My mom got me and my children a new fridge side-by-side ice maker. We were hoping that since it was new, we would have it for a while, but 1 year and 1 month later, it is not making ice and changes temp for no reason. My fridge will, most of the time, keep cold; but then, there are those days that it doesnt. No one touched the temp, and since its been more than a year, Im stuck. How wonderful to spend all that money for a year and one month! We dont have a working ice maker, and also, I cant keep food good. I cant afford to throw food away. And my mom and I cant afford to get another one.

I am a mother of 4 children and 3 grandkids, I love cooking and baking. Before I can post a review on a product or appliance I like to wait and give it enough use to test it. About 2 years ago I purchase a Whirlpool range. I trust the Whirlpool brand because is durable, easy to maintain and simple to operate. After owning my first Whirlpool refrigerator for over 15 years, I am happy to post my review on my almost 3 years old Whirlpool gas stove and oven. I am a satisfied and proud customer of Whirlpool!

I purchase December 2019, I had my previous stove for 20 years and wanted a new fresh look. I purchased the stove during a Black Friday sale. Started having problems with the door not closing. Customer service hold time took days and hours of hold time. Took 3 weeks to repair. Now seeing and hearing sparking and its week before Thanksgiving NO STOVE AT ALL. DONT BUY!!!! What happens when warranty is over????

We paid $6,000 over and above my homes purchase price for double ovens that are defective. Whirlpool will not address the problem! When you bake a pie or a turkey, the bottom and center are raw, and the top burns, because the bottom element is hidden under the bottom of the oven, instead of on top of the interior floor area of the oven. Whirlpools new design is defective! The service technician says the oven is performing as designed therefore there is a design defect! However, Whirlpool will not take any action, because the parts are not broken and they send us back to the extended service plan people. It is ridiculous for the consumer to be caught in the middle. Whirlpool does not want to stand by their product.The builder of our home, Coleman Homes in Middleton, ID, purchased the ovens from Whirlpool originally. Therefore Whirlpool says we are not the original purchaser of the product, Coleman Homes are, and Whirlpool cannot do anything because we did not buy the ovens directly from Whirlpool ourselves, Coleman Homes did. The Whirlpool Warranty (waste of money) says they cannot do anything because it is not a parts issue. Coleman Homes says they cannot do anything because the warranty was given to us when we purchased the home. Whirlpool needs to replace the hidden element with a true baking element so the ovens will bake properly!!! Model Number: WOD51EC0AS Serial Number: D52208658

Whirlpool washing machine #WTW58ESVW1 - I bought this thinking Whirlpool was a good brand name. I was totally wrong. My machine is two years old and the auto sensor switch has quit working 6 times. One time it only did 6 loads of laundry. Another it only worked for 6 weeks. That time I replaced the switch myself to save money on a repairman. Ironically the switch is still under warranty but they will not replace it unless a serviceman comes to confirm that the switch is dead again. This is because 2 have already been returned to them. Obviously, there is a problem with the switch. The company will do nothing. They used the excuse that I did not purchase an extended warranty. This is merely an excuse. Do not purchase any Whirlpool products. You will be wasting your money and time having to end up going to go out to do laundry.

I have a Whirlpool gas water heater that failed after only three years of operation. My previous water heater in the same spot lasted 18 years. The problem is a defective thermo coupler design that burns out if a filter you cant access isnt cleaned every three months.

I purchased a Duet several years ago and did not have a clue as to the problems everyone was having. Over the course of ownership I called the city to determine if we had a sewer leak. I had a plumber inspect our pipes. I felt really stupid that it took me this long to figure out it was the washer. I knew it smelled like mildew and have been using vinegar, afresh, Clorox until I am blue in the face. I didnt figure out that the sewers smell was also the same as the washers until I got on line and read about these machines. Finally, I lifted up the gasket around the door and it was completely black with mold. No amount of afresh was going to fix this problem. Do not purchase these front loaders. Feel like they should have been recalled and I really dont understand why they are still in circulation. I have also been having health/breathing issues and I cant help but think the mold is causing my illness.

Installers left and Home Depot Cabrio washer stopped with water left in tub. I reset GFIC outlet, tried again and it stopped. Did some research and tried different outlets. Same result. I discovered that if you shut off machine as soon as the GFIC is reset, then the washer will drain no matter what. I have been on the phone with Home Depot and they have no solution but to wait one week for a repairman. Very dissatisfying service. Now I am running a 20 foot, 3 prong, heavy duty extension cord into living area where there are no GFIC outlets and it has been running. I believe there is a fault in the washer, but they must not care if we get electrocuted from the faulty grounding of their Whirlpool product.

We purchased a Whirlpool French Door Refrigerator in December 2016. About 3 months later the back panel was frozen preventing it to cool. We unplugged it and called customer service. They sent out a repairman, but by then it had thawed out. He told me he couldnt fix what he couldnt see, but he didnt even check it out. Two months later it did the same thing. Then he said I must have left the door open. He made me look stupid. During that year he came out 4 times until he finally changed all parts. We kept telling customer service we wanted a new one. After going back and forth with them they finally are reimbursing us, but they charged us $300.00 because we didnt want another Whirlpool product... now we found out they have the worst ratings and we certainly had a very bad experience not to mention all the food I had to throw out because of it. They did not care at all. So please do not purchase any Whirlpool products. I would not recommend that product to anyone.

I purchased my Whirlpool microwave model WMH2175XVS-2 in March 2011. The magnetron went bad 3 years and 1 month later. Thats only 37 months! Whirlpool is very sorry but of course the warranty is expired! Oh by the way, I replaced a microwave that lasted 10 Years which was a second microwave (which is still going after 15 years).

Purchased this washer 5 months ago. Have had service 3 times as dark clothes come out with white residue. I have done everything possible to correct the problem. They recommended from cleaning the machine, using less detergent, minimizing the load, using extra rinse, deep water and still the clothes come out with the residue. And it takes way too long to wash a batch of clothes. This is a known problem with this model. Repair company recommended a replacement and Whirlpool insists that it is a usage problem. One thing they said Could be water is too cold, I live in Florida there is no cold water! Whirlpool refuses to replace it. DONT BUY IT!!!

I purchased a brand-new, $4600 36 gas range online. They finally installed all appliances by 10:30 pm last Friday, July 8, 2011. On Saturday, July 9, 2011, I woke at 2 am to weird smell (gas). I opened all the windows and went back to bed not sure since we never had gas before. Gas company came out that day and determined that the burners were bypassing gas. Jenn-Air said it was normal for some gas to come out and that they have sent the repair technician out three times to not find any leaks. The gas company red-tagged the stove saying it was hazardous. Jenn-Air has terrible customer service. I was on the phone Monday to Friday this week, every day talking with safety managers to supervisors with no results. This will be the LAST Jenn-Air purchase EVER!

Worst washing machine ever, I should’ve kept my 12-year-old washer that leaked, it worked better and actually washed my clothes... This washer, the Cabrio 5.3 leaves clothes DIRTY, can’t use fabric softener because it doesn’t wash it out even with the extra rinse and deep water wash, leaves white ** on everything!!! I have to wash everything TWICE! I hate this washer! I hate Whirlpool! Piece of **, I want my money back or I want a different washer that actually works as it should! Wasted money on this piece of **! BUYER BEWARE. DO NOT BUY!!! Bought from Best Buy and boy did they sell it to me, told me it was the best washer out and will save me money! SMH.

We purchased this washer (Whirlpool Cabrio) about two months ago and we have been extremely dissatisfied with its performance. Quite simply, it does not get clothes or anything else clean! I have tried every possible setting and still the dirt remains on anything that is even slightly soiled. So, I cant believe that things that dont look dirty are getting cleaned either. They probably arent even getting rinsed, even with the extra rinse option. It seems almost nobody likes this machine, so why is Whirlpool risking their formerly sterling company reputation by keeping it on the market? I would be happy if I could return it to the store for a refund, but that is not a possibility as far as I can tell. If you are considering buying this machine - dont!

I love my dishwasher, have had no problems and it does a great job. Stainless steel interior is a plus. Give it a try, you will be satisfied with the performance.

55 Gal Electric New in 2003 / Limited Lifetime Warranty - I paid quite a bit more initially at Lowes for this unit. Its stainless lined. I have had numerous problems since purchase. I had to replace the sensing element in the Smart Box in 2006. Then the lights started flashing again making a humming sound in the box. I took each piece apart in smart box and cleaned them, which seemed to help. Then the upper element that is also stainless that requires a special wrench to replace went bad according to the blinking lights. Lights stopped after several resets. Now, the water is boiling out of the top of heater and they tell me its the seal in the element that I never replaced. The cover for the element is off. Water cannot possibly build up and force out the top of the cover of tank. I am not an idiot, yet they tell me that is most likely the problem. They didnt listen to me long enough to properly assess my concern. Every plumber I talk to says its the separation of the liner inside the heater. Nonetheless, I have a water problem now in the basement and have never heard back from Whirlpool as promised with troubleshooting guide on an email. I am sick of calling and getting the runaround with every issue. The warranty is horrible for the consumer. Sure, you have a limited lifetime warranty, but when you cant get proper information when you need it, what good is it? Made in America is why I bought the product. I also need a new washer but will not be searching in the Whirlpool line due to their lack of care with an important issue with my heater.

Bought a Whirlpool washer and dryer in 2/2013. In 5/2014, the washer went out of balance, but corrected itself quickly. Since then, it sounds like a cement mixer during the spin cycle. It took one month to get someone to come out and look at it. Apparently the bearings went and the part alone costs $450! Add another $250-$300 for labor and I could buy another washer. We called Whirlpool, who were unwilling to do anything to rectify the situation, i.e., replace the washer, send a replacement part, give us a discount on the replacement part. We didnt buy the extended warranty because who would think that a brand new washer would crap out after 15 months... and theres only the two of us.Not like Im washing clothes for a family of 5! I only needed a new washer/dryer because I moved out of state and didnt want to move the ones I had. Regretting that decision. Its unfortunate that there has been a decline in the manufacturing of goods to the point that they can be considered a throw away item. Will NOT be replacing this with another Whirlpool.

I purchased this stove in September and I am very unhappy with the Aqualift. The service department said I would have to probably do the cleaning process about 7-8 times for it to really work. I find that very unacceptable would never recommend this to anyone.

When we bought our side by side fridge (model GD5RVAXVB02), the manual said to clean the condenser coils if you have excess dust and/or pet hair. We have both. We tried with the vacuum and with a brush but it is impossible to get to the coils because they run side to side instead of front to back. You can only get to the first coil in front. The rest cant be accessed from the front, sides or back. I called to find out how Whirlpool recommended they be cleaned and they could only recommend a vacuum attachment tool (8171579A) to clean the floor below the coils or a coil brush (4210463RW) that cant reach the coils! This design is meant to fail prematurely. They could have easily installed the coils running front to back so they could all be easily cleaned.

We bought our dishwasher April 2018. This morning I noticed the paint had bubbled above the heat vent (area 3x 1/2). Upon closer inspection, the the paint was also peeling. We called the company to see if they would replace the skin but the agent said the only thing they could do was send us touch-up paint. The door is considered cosmetic & only covered for 30 days. If we wanted to replace the door panel, we were welcome to buy one from them. However as this seems to be a manufacturing defect, we would be replacing the door every 16 months. When we realized whirlpool wouldnt back their product, my husband looked a little closer to see what needed to be done & found that it had rusted under the paint & painting on top of rust will adhere properly.

EveryDay Care? Every day I hope the part needed to make my new Whirlpool refrigerator work again is delivered so it can be repaired. I bought it in December and since then the WRF992FIFM has had the ice maker fail and need replacement and the fan unit in the refrigerator went out 2 days later. It has been nearly a week now and I am using dry ice to keep my refrigerator cold enough to store some food. The authorized repair service did not have the part and Whirlpool is shipping it directly to me but I do not know when. No tracking info, nothing. Three days and no delivery. Then I must call the repair service back to schedule yet another appointment to install it. Meanwhile, I am paying $13.00 to $20.00 per day for dry ice, not to mention the time I had to take off of work for three service calls - for an appliance I took delivery of on December 21st! Less than 2 months. I am finding out quickly that Whirlpool is very generous with apologies and stingy with results. I should have checked the Whirlpool FB page before making my purchase. But they sure are quick to try and sell you the extended warranty. I am developing a whopping case of buyers remorse.

This complaint refers to model number ET8MHKXMB. It was purchased in November of 2008 and the fan had to be replaced on May 29, 2012. The cost of this repair was $189.79. This is a terrible thing to have happened. Obviously, the fan was made cheaply. We are very dissatisfied and will not purchase another Whirlpool refrigerator ever!

We had to have a sensor switch installed. We purchased this washer, plus the matching dryer June 10, 2010. This was just 16 months ago today.The cost of this repair was $160.24, for part labor and service call. The service call was excellent. Wish I could say the same for washer.We had previously owned a KitchenAid washer for over 20 years (before purchasing Whirlpool washer) and did not have to have one repair on it. Very doubtful I will purchase another Whirlpool.Looks like quality is a thing of the past.

They really dont make them like they use to, do they? This Whirlpool Cabrio aka Caprio has given us problems for the past 3 years, weve owned it for 5 years. It doesnt matter how much, or how little clothing you put in this washer machine. It will start going NUTS, Thudding, Banging against the inside of itself, completely out of whack, and then it will show a UL where the time is shown. Every time we do laundry this happens, and we have to stick our hands in the hot water and reorganize the clothes, and pull more and more clothes out till theres only about 3 items of clothing left! This washer is GARBAGE! I advise people to keep away from it. The washer we had in the past lasted us years upon years. These washers of now in days are Crap Garbage. Keep the fancy tech look, and give me the old fashion Knobs ANY DAY! Whirlpool brand is Not what it once was.

In defense of Whirlpool, I will preface my question with the fact that I did attempt to call them and they were closed and Ive used manual to troubleshoot. Problem: when I cook any baked good in top smaller oven, the cookies, etc. on front of pan closest to door bake even and are not burned. All cookies on back half of sheet are burned and not cooked thoroughly. Any advice or similar experience to share would be so appreciated.

I have had this Whirpool Cabrio washer now for one year. Clothes always come out wrinkled (even after drying). It leaves clothes unclean and leaves white streaks in clothes. Water level is so low in, that it cannot rinse or wash clothes properly. After washing towels, when removed to put in the dryer, soap is left in towels. I have had a repairman here, he says the design is bad, yet reports works as designed. Dont buy this washer. This is a piece of junk!

We had an old Whirlpool dishwasher that worked great for over 20 years. It had the ole tried and true knobs in front. We replaced it with another Whirlpool when we updated the kitchen. That one had the new electronic panel in front, it lasted 6 years then we had all kinds of problems and finally replaced it with a Bosch, also with a electronic control panel. We have had this one 4 years and it is not working at all. Wont start and keep a cycle on. Spent $500 on it and its a piece of crap. Thousands of complaints on the internet for these new types of dishwashers. The electronic controls panel are faulty, and probably get wet from repeated use. Go back to the knobs. They worked for years and years!

Our Whirlpool Cabrio Washer is barely over one year old, and its getting increasingly louder (I cant hear the TV in the other room). I researched this issue and found this is a common problem with the upper and lower bearings. Check it out on YouTube; its easy to find. Whirlpool should buy these back! Is anyone aware of a class action lawsuit against Whirlpool regarding these pieces of junk?

I bought my 50 gallon gas water heater in December 2015. When kicks on it rumbling. I called warranty and they said We will send tech out but I will have pay the labor. Why do I want pay for a tech if the quality issue is the water heater. Need pay $180 for person come out say its defective. No sense to me. Then when they tell me need new water heater pay them for install. You can check my accounts I used to shop Lowes and will no longer do it because of this service.

The repairman said the shaft, which of course is one piece with the outer drum, is corroded. Really? Did we not expect water in our washing machine? The repair is $500. After reading all the bazillion complaints on this model (on the internet), I have decided not to repair the piece of junk!

Whirlpool and their extended warranty is a ripoff! I bought a Whirlpool refrigerator not even two years ago. It has stopped working 4 or 5 times, causing us to lose all our food. When it is working, it makes an awful noise. I have renewed my contract with A&E due to the fact that the frig is a lemon; which A&E is a joke as well. I contacted them 2 weeks ago about the frig not working again. They stated they could not come until Sept 18th, a month later. Come on. Really. They are a ripoff as well as Whirlpool appliances. False advertising is against the law. I also contacted the merchant where the frig was purchased in Hazlehurst GA, who does not care one way or the other. If whirlpool was as great as they seem to think their appliances are, they would replace this lemon in my kitchen. We are elderly and are not able to keep dealing with this issue. I would never ever recommend a Whirlpool appliance to anyone. As a matter of fact, I will tell everyone I know not to purchase one; due to the way your company has treated me and my wife.

I have a combo Microwave oven/oven GMC275PDS07. When the microwave is finished with the requested program, the end of program chime lets you know its done. Then, if the door is not opened for at least 3 seconds, the chime will ring again every minute thereafter ad nauseum. This will go on for hours without end. I know because I tried it. I reached out to Whirlpool via a web chat and my question was not even addressed. I was ignored. From reading other submissions, I assume this is de rigueur for Whirlpool. I then called Whirlpool and spoke to Katie in Tennessee. She was not able to bring up any make or model when I provided her the numbers exactly as listed on the inside of the door. She was not able to provide any respite from this annoying feature.This a Whirlpool Gold model, presumably the top of the line, in my book I will never purchase any Whirlpool product of any type and I will make it a point to let anyone who will listen that Whirlpool is not a manufacturer that takes its customers concerns seriously. Katie then advised that she looked up this feature and told me there is no way to turn the beeping off. I find this amusing since she could not find the model or serial number when I gave it to her.

I initially purchased all new Whirlpool products as part of my new home purchase in a Pulte subdivision, June, 2011. My WP microwave failed to heat in 2012 and the replacement of the Magnetron and Inverter and service was covered under warranty (would have cost me $493.51). Sadly, the microwave again failed to heat in 2014. I was so disgusted with this second failure, I decided to live without a MW until January, 2016 when I paid for my second service call and learned, once again, I needed a replacement Magnetron and Inverter, to the tune of $400. Both servicemen told me the 2011 magnetron/ inverter mechanisms were new technology and did not last long. Again, sadly, when I contacted Whirlpool, they would not admit to their defective product line and indicated they could do nothing since I am out of warranty. It is unconscionable that a corporation is not liable for their defective products.

We purchased the Whirlpool Cabrio washer & dryer. The glass lid design is VERY POORLY constructed and should be replaced by Whirlpool. We paid over $200 the first time the lid broke and was told this is going to be a continuing problem. They were correct! We subsequently replaced the lid 2 additional times only to have the same break on the right hand side causing the lid to pop up. Something must be done and WHIRLPOOL need to care for their machinery. They should replace the lids or provide a major incentive for consumers to replace the washer. PLEASE DO SOMETHING!

After only 6 months of use, the cooktop light bulb burned out. When I tried to replace it, the glass part of the bulb separated from the base. The bulb is screwed in so that the base faces away from the front of the microwave. With the small cavity and the backward installation, it will be impossible to remove. Now I have no light and dread how much a service call will be. The unit was installed by a contractor prior to our purchase of the house and it is now out of warranty.

Last year, our clothes started coming out too wrinkled. And until recently, its making a loud noise like an airplane. I called Whirlpool, and the only help they can give me is finding a company that would do service and would charge a lot.

The trim on the front the my Whirlpool electric range has rubbed off. This is where the knobs for the burners are located. It was replaced once during the Whirlpool 1 year warranty (so it obviously happened with the first year!) and again during the second year we have had it. We have an extended warranty but have been told that it is not covered. It is ecstatically unacceptable. We have not used any type of harsh cleansers on it - simply a sponge to remove any spills yet it keeps on disappearing. I strongly recommend against buying any range from Whirlpool as it is quite obvious that they do not stand behind their products beyond the first year.

My wife and I made the unfortunate mistake of purchasing the Whirlpool Gold Series, model #WRF989SDAM00 refrigerator two years ago...yes TWO YEARS AGO! We have experienced numerous issues with the appliance but our latest (no cold air in both the fridge and freezer) prompted a call to a service center. The serviceman that showed up knew immediately what the issue was, our compressor and evaporator had malfunctioned and according to him, We have seen the same problem in a number of these models and that Whirlpool has since redesigned the casing to prevent this issue in new models. What about those of us who purchased the previous model?! Now shame on us I guess for not purchasing the extended warranty...I suppose I just took it for granted that in todays competitive manufacturing world Whirlpool would be committed to building a quality product! Because of this I was offered two options from Whirlpool. #1 - pay for the parts yourself...over $800 or #2 - purchase their 1 year warranty program @ $350/year, this warranty will cover all parts and labor for an entire year. Based on my experiences though, I will need to purchase a 1 year warranty @ $350/year for the life of this lemon, potentially costing me $5500 over a 10 year period. I ultimately took option 3...tossed the piece of junk and bought a new fridge from their competition. Dont be fooled by the attractive design and appearance, the Whirlpool Gold Series refrigerator is a money pit waiting to happen!

We bought a Whirpool Cabrio, model WTW62000W9, and it is junk! We bought higher-end thinking that it would last. It is less than two years old and averages three loads per week. The transmission is out. It needs to be loaded on the boat back to China.

We bought a new Whirlpool refrigerator about three years ago. Because of space, we had to purchase one with a top freezer and also with no ice maker. First of all we didnt realize it was much deeper than our old Kenmore so it stuck out further into the kitchen space. That was not that big of an issue. At first everything ran great including the top freezer compartment, or so we thought. Then we noticed that when we had ice cream in the freezer and put water in ice cube trays to freeze, the ice cream would get very very soft. This continued to the point that now anytime I put water in there to freeze ice cubes I have to turn up the temperature to keep the ice cream frozen. Once the ice cubes are froze, there is no problem, but they take at least six hours to freeze. Then one day when a young child slammed the refrigerator door closed, the freezer door popped open about an eighth of an inch and then closed again. So, I tried it. Anytime you close the refrigerator door a little too hard the freezer door pops open. I then tried the dollar bill test to check the strength of the seal. The bill pulled right out of the door with very little effort. So, is the problem bad seals, bad design, or bad quality control, or what. How can I be assured that the frozen foods in the freezer are being frozen as solid as they should be. I know they dont freeze solid enough in the freezer door. I will eventually dump this refrigerator and go get another Frigidaire. If we have to get one with a bottom freezer, we will just have to rearrange our kitchen to accommodate it. But, having to turn the temp up and down every day is ridiculous. I have had issues with food close to the walls in all refrigerators slightly freeze, but never had an issue with keeping things cold enough. I will never buy another Whirlpool refrigerator, stove, or anything else for that matter. I have always had good luck with Frigidaire, so I will stick with what I know works.

Purchased this washer new 2015 for use in our cabin. Now 4 years later with very little use the motor has seized. Washer is useless. What happened to 20 years of almost daily use and still runs great. This washer is a very poor quality washer and has now failed. Please save your money and buy a different brand.

2 years ago, we remodeled our kitchen. We replaced with all Whirlpool appliances. WHAT A MISTAKE! Our ice maker went crazy 1 month ago and now our dishwasher almost caught fire Memorial Day weekend while we were away! Thermal Fuse and stainless interior prevented us from losing our house to fire but really Whirlpool, you spend that kind of money and all appliances are breaking before theyre even 3 yrs old! My husband is very good at fixing things but when he diagnosed dishwasher, he said he has to find a way to fix wires in control panel because melted insulation. Now I am afraid of it. So if you purchase Whirlpool, expect maybe 2.5 to 3 yrs service and think of them like a disposable lighter, use it and throw away.

I purchased my Whirlpool Cabrio H2Low from Sears 6 years ago. After numerous problems with clothes not getting clean (soap spots, stain transfers, etc) I learned the only setting I could use that actually cleaned was bulky with an extra rinse (so much for the energy efficiency). My first major repair was in the first year. Weve since had 3 more and the darn thing died again this morning. First the motherboard died and needed replacement, the drain pump failed, the door lock failed, and twice now it stopped spinning. At first I thought maybe I was just unlucky and bought a defective machine but repair sites are filled with reports of similar problems with these machines. I will never buy another Whirlpool product again.

Cabrio washer - What a piece of junk! My washer is 2 years old, it now does its own thing - stopping when it wants, doesnt finish cycle, beeps finished and the clothes are so wet and the washer is not emptied. Then, I put it on drain and spin. One time, it kept going for almost an hour of off and on. My clothes were so out of shape and that was on low spin. I finally took them out and put them outside. The clothes from day one have always come out so wrinkled and that too is on low spin. Im afraid to use high spin. I know you have to for towels, but it still does not drain. It shuts off and on when it feels like it. My first contact with Whirlpool was, Well, did you buy the extended warranty? I hate it when asked that when purchasing any product. Its like saying, This is a piece of crap. Im warning you now so buy the extended. So right there, I felt Whirlpool isnt willing to help. What else can we all do here? Please advise.

We purchased the Whirlpool Cabrio washer a few months ago. When we wash the white cloths using the (white) setting and add bleach and the HE detergent, the washer does not clean the white cloths very good at all. Sometimes the white cloths come out looking worse than they did before they were put in the washer. We called the people at Whirlpool and they said there is nothing they can do as long as all the functions on the washer work the way they’re suppose to. I thought the function of the washer is to clean the clothes but, they say no, as long as everything on the washer is working. That is what their warranty covers.

I purchased a Cabrio top-loading high efficiency low water washer thinking I was doing something for the environment by saving on water and electricity. After about a month, I noticed that my clothes especially those with stretchable fabric were getting larger. My husband kept telling me I was imagining it. Then the clothes would get all tangled especially the pants with ties on the waistband. At the end of the cycle, the clothes are stuck on the sides of the washer and I have to pull them apart. Even after drying, I have to iron everything even my pillowcases which look like they have shrunk they are so wrinkled. I recently bought some 100% cotton outfits and they are even more wrinkled and are starting to lose their shape. I am now noticing that the stains on the clothing are not coming out even when I use a spot remover and put them through a second time.Now I started to notice an odor coming from the machine and my towels and wash clothes have a sour smell. I paid $600 for this machine and after reading the reviews, I just want to replace it. I am now waiting for it to break down. My husband kept insisting I must be doing something wrong. When it goes into the spin cycle, it bounces all around and I have to push it back in place when it is done. I do not think the clothes are getting rinsed enough so now I put them through a second rinse and always put it on low spin. It doesnt see to matter, it sounds like a rocket ready to take off. Is it even worth it to go back to Lowes where I buy all my appliances?

I purchased a Whirlpool cook ceramic cook top for our new kitchen. The very first time I made something (it was lentil soup) something stuck to the cook top. I have had a ceramic cook top before for 18 years - never had a problem until the whirlpool cook top. I cannot get it clean. I have tried everything! Such as stove top cleaner designed for whirlpool cook tops ($22), other cook top cleaners, the single edged razor, a scrubby sponge, steel wool, I even resorted to furniture stripper - NOTHING has removed this spot. I am ready to throw out this new stove top! What a huge disappointment this Whirlpool product is.

Whirlpool Duet Machines - I feel very fortunate as I have not had a single problem whatsoever with my Whirlpool washer and dryer and it is 5 years old. Never once have I needed a part or had trouble with it. I feel bad for those of you who are dealing with this as what is worse than a washer/dryer that does not work?

Love the design and style. It is an above the stove built-in model. And love the combination of microwave use and to have the ability to also use convection. It certainly has been an excellent purchase and would buy it again and would strongly recommend it to anyone.

Whirlpool 70328 215 IMFRESH ROY 5S purchased on 14th Feb. 2016. It has stopped cooling on 11th April 2016. Complaint lodged on 12 April. No serviceman attended and not connecting toll-free number. Never, never go for a Whirlpool refrigerator.

Its not even a year since I have had this washer / dryer--and I already made two service calls regarding the dryer. The washer does not get the clothes clean. When washing even one blanket, it bumps, grinds and does not wash well. I have had to do two loads compared to one in my Amana set. It is terrible. You have to stay with it while washing or always load. It gets uneven with any small load. Everyone I know hates this washer.

My daughter bought a mobile home manufactured by sunshine mobile home co. in Red Bay al. The home is only 6 mo. old. In that home there is a Whirlpool microwave oven model # WMH2175XVB-1 Serial # TRY 20 23398. After 2 months my daughter microwave stopped working, Whirlpool sent a repair man out to fix it. He didnt have the parts to repair it so he left to order some parts that he thought might be the problem. When the repairman returned two weeks later with the parts, he replaced a door switch. The oven started to work. About 4 days later it quit working again. The repairman returned for the third time, tried repairing the oven and was unable. I had to help him remove the oven so he could take it home with him so he could try to repair it. At that time I was so angry that the Whirlpool co. would send a repair man out three times to repair something that was obviously junk. When I talked to the people at Whirlpool they told me all they were authorized to do was repair it. I explained the repairman has tried three times and couldnt and that they in good faith replace the unit. The answer I received had to come from a mentally challenged person. If this is the response of Whirlpool about their product, then I want no part of them in the future.

WRF989SDAB00 - Our house burnt down in April 2012. We purchased all Whirlpool products to be put back into our house. We had to purchase these items in November 2012 so the contractor could get them into our house because of the cabinets. We did not move into our house until the last week of December and could not use these items until then. In December of 2013, our freezer went out along with the ice maker. I had to fight for Whirlpool to pay for these repairs. They kept saying that it was over the one year warranty. They did accept responsibility and paid for A&E to come look at the frig. One guy came out the first time and thought he fixed it. No. A month later two guys came out. They said it was the condenser. They ordered the parts and came back a third time to replace it. A month and a half later, same problem. A&E came out a fourth time and thought they fixed it again. Nope. During this period, I purchased a extended service plan. I AM TELLING EVERYONE TO DO THIS NOW BECAUSE IT TAKES 60 DAYS FOR THIS PLAN TO TAKE EFFECT. Now the service plan people sent a different company out and he said it is going to cost a lot of money because the things that need to be replaced. The plan SHOULD cover all of this. I called both the service company and Whirlpool demanding that they send us a replacement frig. I believe sending someone out at least SIX TIMES to fix the same problem is ridiculous. Each company is blaming the other and each is saying its the others responsibility to replace the frig.

From the very beginning the washing machine did not clean the load. It doesnt even get the load completely wet. The best you can hope for is to utilize lots of fabric softeners to at the least make your clothes smell clean because they surely wont be. Dont even get me started on the load lock feature because it serves no purpose other than to drive you batty. When your 15 year old son offers to give you money to buy a new washer after owning the one you just bought there is nothing I could say more profound than that. How Whirlpool stays in business befuddles the mind.

Our refrigerator is only 18 months old, a Whirlpool Gold gx5htxvyo5. It was sold to us believing it was stainless steel. There is no way scratches come from nowhere. We have a Whirlpool dishwasher and stove in stainless steel. You cant compare how much better they are. Im very dissatisfied. Wed like to have new doors. Something is very wrong with the finish on these doors.

Whirlpool convection/microwave GMH6185XVS - In 2011, we purchased a whole new kitchen for our home with the top of the line Whirlpool products. The sorry side of this project was our microwave. This product has been terrible for us! It has been removed from our wall 4 times for failing... and four times we have gone for weeks at a time with a big hole in our kitchen wall!! All of the failures were due to the microwave not heating food or drink, and all, according to our local dealership, were for various different reasons. Again, it has failed and our local appliance center who we bought everything from does not want to deal with it anymore. I dont blame them... I dont either!! It looks beautiful up there above our range telling me the time of day... My wife and I are older adults and take very good care of everything we own. There certainly has never been any abuse to this product (not to mention we spend half our year at a winter home so this microwave only is used for 6 months a year). I contacted Whirlpool customer service about the reliability of this product and their response was that it is now not under warranty and we should deal with our local store about repairs. I have a small Sharp microwave sitting on the counter below this crappy excuse for one that stays there all the time in anticipation on the Whirlpool going down!!! The $60.00 Sharp never fails me!! This was our 2nd time around purchasing all Whirlpool products for our house. We did the same thing when we built back in 1990. All appliances performed as they should have back then. It seems Whirlpool integrity has gone downhill. I will never buy another Whirlpool product nor I will recommend to anyone I know to do the same. Good luck to anyone who purchased one of these.

We have a Whirlpool washer wtw5640xw2, we have been experiencing burning wire smells for some time. We had bought the extended warranty. Lowes sent out a repair company. They replaced the main board and the problem has continued. This has been as intermittent problem with the burning smell. We experienced it this week really bad! I thought the machine was on fire. We called the repair company and they said they had fixed the problem. My husband called the Whirpool number and they said they would NOT do anything to help us. We are trying to get help from Lowes where we bought the washer. I am terribly afraid to use the machine. This model needs to be discontinued.. We bought this machine 5-07-12. If we dont get some help, we are going to our lawyer.

Have owned my Whirlpool washer model# LSR 701 0PQ1 two years and had no problems with it before today... The washer was used once a week since I purchased it and only myself use it. There is only myself and my son and our loads are always small. Well today I put a load in and went to finish my other housework and when I went to check on the load, there was a weird smell in my laundry room. As I approach the washer to put softener in the rinse I saw a flash behind on the left hand side of the control panel where the size of load and water temperature selection is. I unplugged the washer and put the fire out. Have never had anything happen like this before with this brand. I already know I have to buy another washer but am scared to get another Whirlpool.

I have been noticing my husbands shirts as well as my clothes continue to get what are spots of bleach and I do not use bleach on anything other than whites. This has been going on for quite some time and I noticed this morning another outfit is RUINED because of bleach spots. I decided to look up on the internet if this is a problem with this machine - AND IT IS! I am so disappointed I could cry. The clothes I have are donated to me. All my clothes are hand-me-downs - and my Whirlpool washing machine is ruining all my clothes and my husbands.

In 2009 I bought 2 (yes 2) machines (one was for our daughter). I also took out 5 year warranties on both (good job I did). Within the first month on our machine the paddles flew off and after a bit of a debate with the insurers we had another machine (same model). Within a short period from date of purchase both machines had a number of faults - circuit boards, weights that came loose! and bearings going. There are other bits but too extensive to list. To be fair to the insurers they were no trouble (it really is the inconvenience of being without a washer and having to schedule time to get it sorted out). I will never ever buy a Whirlpool as all of these (3 in total) have been a nightmare and ours is sounding noisy again (it only had a new drum 12 months ago for bearings - yes you need a new drum for that £200 in all!!) so I am really glad that we have the insurance. When that runs out and the machine is dead (whichever comes first) I think we will will be buying either a Beko or a Samsung that are getting really high ratings. Anyone reading this might wonder why did we buy these in the first place. Well a colleague of mine at work had one and said it was fantastic (she had children so used hers a lot) hence me buying them (and they were not cheap by any means, so thought we were getting a cracking pair of machines....cracking, yes they might as well be as a chocolate fireguard has more reliability...WARNING DO NOT BUY A WHIRLPOOL WASHING MACHINE - IT COULD DAMAGE YOUR SANITY! AND FAITH IN HUMAN BEINGS TOO!!!!!

We purchased a new home April 2013. All our appliances were new Whirlpool stainless. Looked nice. After almost a year our microwave started acting improperly. Beeping, changing screens, not working when buttons pushed. Then the micro wave had a melt down and caused the glass try to break, parts to melt and caught fire internally melting plastic. Notified Whirlpool and they sent out individuals to repair. After several weeks the repair was completed and we were advised that they did not understand why this would or could happen. We should be fine now. Well we are now again having this unit beeping, changing screens, not working when tried, and when entering numbers, number and time are not what was trying to be entered. This unit my wife says is possessed and she wont use it. She fears it will burn the house down. It is Velos model TR 2 24 11000 serial number. It now beeps and changes with door open as I read the serial number.

In a recent decision regarding the highly expensive, supposed elite performing Whirlpool Gold refrigerators, a group of unsatisfied Whirlpool owners who are tired of cleaning water puddles from in front of their new refrigerators have hired all automobile corporations to manufacture cars only available to the CEO, Executive Board as well as the entire engineering staff at Whirlpool.These cars will be guaranteed to run ok. However, once the car is heated up under normal working conditions, the cars will be guaranteed to leak oil all over whatever surface they are parked upon. We hope that this will not be an inconvenience to the CEO of Whirlpool; however, perhaps once you have destroyed your new garage floor, you will understand the nature of our complaint with your poorly designed and engineered Whirlpool product.While this letter will have no effect on my current defective product provided to me by Whirlpool, it makes me feel better and I have not had the attention span to listen to my wife complain while she is cleaning up yet another (whirl) pool underneath our fridge.

Buy a new in a box dishwasher, it is not working, not a good customer services, I wait 1 week for a tech to come and fixed, and I will wait to tech to come back with parts to be fix. Company not replace the unit, I pay for something that is not working. Very frustrated for the time waste. 3 day off from work.

Same old story! Whirlpool Cabrio is a lemon! I did pay a service guy to find out what the problem was - $70. I ordered a control board for $210, I still had the problems. I ordered bearings for $80. Yay, my Cabrio works! Well, this was all 4 months ago and here we go again. My washing machine is doing everything it was before I replaced the brand new parts. Im so mad! I spent $360. I couldve had a new washer, not a $1000 Cabrio, but who cares at this point! Anything seems better than this pile!

The knob on the Gas Cook top stove from Whirlpool (Part no: W10594481) is very poorly designed. It is very flimsy and breaks easily inside. Outside it still looks intact, but if you examine it on the reverse side, where it actually fits into the cooktops metal rod to turn the gas up or down, we can see it breaks there, as it is made of very cheap plastic. Although it is supposed to be a Stainless steel knob, it is actually all plastic where it matters most. I bought the new cook top from Whirlpool in 2014 and within a year have replaced all the knobs as they were breaking once every couple of months. I am still having this problem after 2 years now. I have contacted Whirlpool and have asked for a solution to this problem. They dont have any, other than offering a new version of the knob which costs $10 more and it is not easily available anywhere. I feel very cheated that I got a poor quality product and no help from them on fixing the problem.

My Whirlpool stove works really well, and it is self cleaning. I have had my present oven/stove combo now for 5 years and had not had one single mishap at all. I am so confident that you will like it I am personally recommending it. It bakes beautifully and if there is a spill or overflow in the oven I just press a button & it cleans itself!

My new washer quit working properly. It does not spin or wash properly.

I bought a Whirlpool wdf760sadmo. It was Oct 2014. It broke 31 days later. Lowes said they would not take it back. Called Whirlpool, they sent a repairman out a week later. They ordered parts and came back two weeks later. The parts were not the correct ones. Ordered more parts. This time back in a week. Ok about three weeks have gone by with a broken dishwasher sitting at my house. Got it fixed. A month later a different problem. Call Whirlpool, wait, on hold for about 20 or 30 minutes. They sent a repairman out who ordered more parts which will be in in two weeks. Meanwhile I am without a dishwasher again. I have had to take a day off work each time they have came to repair it. I have spent way too much time on this thing. I wont be buying another Whirlpool.

Had washer since 2016. Have NEVER washed a load where there was not a problem from washer dancing to having clothes come out without water ever touching them. Would NEVER recommend Whirlpool! Tried to contact Whirlpool website to register a rating & even their website is defective - could not get through after several attempts.

I agree with all the unsatisfied customers with the Whirlpool Cabrio! Clothes do not come out clean! I called Whirlpool also and was told to be sure to place my clothes around the sides of the tub, which I always did. If Whirlpool was smart, they would take the complaints about the Cabrio and offer the customers a small amount of money towards purchasing another Whirlpool washer. I know I would have appreciated that. Instead Ill go out and buy another washer and not a Whirlpool. Even my kids dont want this washer and its practically new!

Fridge residue - ED5FVGXWS07: Well, I gave it a long time and this is how they make Whirlpool refrigerators! I had a GE for 20 years and was so looking forward to this new one. What idiot designs a fridge that leaves water stains like this? And, the water falls onto the floor when refilling a water bottle plus there is no catch for the water. Argh! I really dont want to live with this for 20 years! Their resolution was to get a water softener; really?! It has a filter built in. They refused to replace the fridge.

I am very disappointed in my purchase of Whirlpool High-Efficiency washer and dryer. It does not clean my clothes! I have white towels in my bathrooms, I have them for years. They have always come out perfectly white with the regular washer I had for years. Not any more! They now come out with yellow spots all over them. Dark clothes come out with a white residue on them that looks like there has been a napkin in the wash. I talked to Sears where I purchased it, they said I might be using too much detergent, so I have tried using less to no avail! I hate my washer!

Late on the evening of Monday, January 27, 2014, after springing a leak in my 8-year-old water heater, I purchased a new Whirlpool model N50T61 replacement from Lowes. Installation went smoothly and the unit lit off fine the first time. It heated the initial tank of water rather quickly, but the next morning, I noticed the status light on the control unit was not blinking, which indicated the pilot light had gone out. I relit the pilot light, the water heater fired off and appeared to be working properly. 12 hours later, the status light was out again. I relit the pilot, but within 20 minutes, it went out again.On Wednesday, the 29th, I called Whirlpool customer service and explained to the representative what had been happening. He stated that since the status light was not blinking a code, the problem was either an air supply or venting problem, and he couldnt help me. I relit the water heater again and performed the match smoke test described in the owners manual on the vent connection. It did exactly what the manual said it should do, so I assumed that was not the problem. However, while performing this test, the water heater went out again. This time, being right there when it shut off, I saw the status light blink twice about 5 or 6 times before it quit blinking all together. The two blink error code indicated low millivolt signal from thermopile.I called customer service again and explained to the representative what the first person had told me and also told him the results of my test and that this time, I had observed the two blink error code. He asked if I had a multimeter (which I do), so he had me disconnect the wires for the thermopile, connect the meter to the wires, light the pilot and read the voltage. My meter is an old analog unit, and not capable of reading millivolts (which is what the thermopile output is), and I informed the rep of this, but he had me do it anyway. As I suspected, I saw absolutely no reading on the meter. The service rep stated that he believed the error code and decided to send me a new thermopile assembly. However, their shipping department was closed for the day and I should not expect to see the new part until Friday. This was unacceptable, but he stated that this was the only option available to me.After thinking about this situation for a while, I again called Whirlpool customer service and told the representative that I was not satisfied with the solution previously presented to me and that I wanted a return authorization to take the water heater back to Lowes for replacement. The rep stated he couldnt do that, but said that there were a couple other things I could try. He attempted to explain these procedures to me, but wasnt able to do so clearly. He stated he would email the instructions to me. As of this writing, I still have not received the instructions.In the meantime, I did some internet research and found that Whirlpool water heaters have numerous chronic problems, including the issues I was experiencing. I decided this was not a product I cared to own. I called the Lowes store where I purchased the water heater and spoke with the manager. I explained the entire sequence of events to him, and he told me to bring the water heater back for a full refund. Since my local Lowes store only sells the Whirlpool brand, I took the money and purchased a different brand of water heater from another home improvement store. Needless to say, it will be a cold day in hell before I ever purchase another Whirlpool product.

Bought Whirlpool Gold 21.9 bottom freezer (stainless) Jan. 2013. When it was 19 mo. old I noticed the freezer door was pitting. I have the Lowes protection plan. Not their problem, door is a accessory not a part. Whirlpool said no quality issues with the material. Very disappointed Whirlpool did not stand behind a product they sell. From past posts I am glad we did not hook up the ice maker.

Purchased the Whirlpool DU915 in 2004. Its been 16 years and I havent made a single repair. A lot of that is just proper use, i.e. scraping off food stuff, using correct soap, etc. I have other newer Whirlpool dishwashers at rental properties which have required repair due to misuse. I would recommend Whirlpool products to friends and family.

Replaced an old water heater with new Whirlpool 40 gal. short natural gas water heater N40561-403. Good instruction, very clear directions. Also purchased at Lowes was a Utilitech universal gas water heater installation kit. The nipples provided in the kit screwed very loosely into cold water inlet and hot water outlet. I used teflon tape and finished the installation. When I turned the water on both fittings leaked. I couldnt tighten the nipples any further so I shut the water off and drained the tank a bit and reinstalled the nipples with at least 8-9 wraps of teflon tape. Im not sure if that is normal or if nipples were under size or if the cold water inlet and hot water outlet were larger dia. than normal. FYI.

I always appreciated Whirlpool’s quality, but this brand new stove in my brand new home is a disappointment. The top, back (control panel) gets extremely hot when the oven is in use. The burners are not as easy to regulate, and the broiler (which is under the stove, a negative for me) didn’t come with a broiler pan. That was an additional cost. I had service out in the first 60 days because the oven wasn’t heating properly.

My Whirlpool super capacity 465 started flaking out on the temperature and burned our dinner. I had a repairman over to repair which he did after about 3 hours of testing. Less than 6 months later it did the same thing. Overheating in the oven.

I would like to know if anyone else is having trouble with the broiler unit. The unit quit working. Thankfully I had purchased the extended warranty. The guy came out, cleaned the orifice and called it good. The next day I went to use it, and guess what, it did not work!! So we thought maybe we needed to leave the oven door cracked open a bit... Well, guess what... It melted two of my knobs!! We called, got another guy out here. He checked everything. Even pulled the stove out to check out connections. Then he informs us that you can set the broiler to whatever temp you want. Thats new. So again, we try the broiler.... Guess what... It got to the temp and clicked off. Now I ask, how does one broil a steak if it does that? I did call Whirlpool directly and got nothing. Our model is WFG361LVQ2. So please, if anyone out there knows that this is how it is supposed to be... please let me know.

We moved into our house about 5 years ago. We didnt know how old the heater was so 2 years after moving in, we replaced it with a Whirlpool Electric Water Heater. (2009) Last August, (2 1/2 years after installation) we found our carpet soaked in the room adjacent to the water heater and discovered it had been leaking into my finished basement for who knows how long. We contacted Whirlpool and they said they would replace the heater but I had to pay for the install because it was over a year. Mind you I had just paid 300 bucks 2 1/2 years before to put that one in. So I paid another 300 bucks to have a plumber come out and install this one. I had extensive damage to my basement, rug, walls with mildew and possible mold from the water. I went through my homeowners insurance and had almost $5000.00 worth of damage.So about a week ago my husband calls me downstairs and guess what, my brand new rug that I had replaced 11 months ago due to a leaking Whirlpool Water Heater was soaked again. This heater, 11 months old, leaked yet again!!! Needless to say Im beside myself, especially when I call Whirlpool and they will replace it, again, but who the hell wants to have damage to their finished basement every year??? When I called and asked them to pay for the damage this time because I cant possibly put another claim in with my insurance in less than a year for the same thing, they just say that they will have the labor charges dismissed as a courtesy. As a courtesy??? I said its been less than a year so they owe me the labor charges; she said no that it goes by the original warranty from 2009. What??? Thats utterly ridiculous and how is it possible that they can get away with this. That has to be against some state statue or law, to use the previous warranty on a defective product. So now Im left with about $2000.00 worth of damages this time to my brand new refinished basement all at the hands of Whirlpool. I had to get another one of their heaters because they wouldnt even give me the money for the heater so I could buy a different kind. I will NEVER buy a Whirlpool product again and Id advise to anyone who will listen to spend a little extra to avoid this hassle!

On 5/3/16 I purchased an Amana high-efficiency, low water, top loading washer. What a joke, it is a piece of junk. There is no water so clothes dont come clean, and if you leave money in the pockets no worries. As it will be right there after the clothes are washed and dried (got matching dyer also). They dont even smell clean after two washing. And now you are to purchase a cleaner to clean your washing machine. This is truly not an efficient machine in any way.