The exterior look of the refrigerator (WRX735SDBM00) is impressive and the stainless steel does not show finger prints easily. It has two french doors on top, a middle drawer, and the freezer drawer on the bottom. The interior is 25 cf, but there isnt much space, even with reconfiguring the shelves, and the crisper/meat drawers are so small, that a large bell pepper wont fit. When one French door is closed it pops open the other door, which then does not close back tightly. Although there is an alarm system to warn a door is open, it only works if the doors are open and not just cracked. We have to constantly push on both doors to be sure they are closed tightly, even after washing down the gasket to get a better seal.

Bought the Whirlpool Duet washing machine. It lasted around eight years. In the meantime I was replacing the rubber door seal cleaning out the pump constantly. The plastic pieces inside the drum all broke. Every few months I would get an error code. And During spin cycle it would literally shake my entire house. The problem with all the front loaders is the construction of the drum and the drum bracket. They are made of dissimilar materials. (Stainless and zinc) When you add soap to the water then the bracket becomes an anode and the drum becomes a cathode, which creates electrolysis which corrodes the bracket. When the bracket breaks your machine is totaled. I’m finished with every manufacture except Speed Queen. I bought a Top loader Speed Queen and I love it, it is built like a tank.

It is a very reliable and efficient washing machine. I enjoy the energy saving features as well as how clean my laundry is, no matter how soiled they may be. I would definitely recommend a Whirlpool washing machine to a friend.

New range and the faceplate keeps melting. Had it fixed once and it is melting again. I have been trying to contact Whirlpool but to no avail. What is my next step and is anyone else having a problem with this.

Sent an e-mail to Whirlpool. They responded with apology. Sent a second e-mail telling them they should be paying the $300 for circuit board in a two-year-old range. No response. Also, sent e-mail to Geniers. No response. The impression I get is that neither are the least bit interested in the problem. Once they sold the $1260 range, they were done. We will never buy another Whirlpool from any store and we wont buy anything from Geniers in the future.

We purchased the largest Whirlpool Cabrio Washer (over $1100 value) 3.5 years ago, and had nothing but trouble out of it. The drum has had to be replaced twice, the motor once, and then supposedly a bolt kept coming off on the drum as well, that had to be tightened twice. Now, we dont know what is wrong with it - we suspect suspension imbalance or something, because this extra large capacity washer is constantly unbalanced even with 6 articles of fabric in it now, and I dont even think about putting even what would be considered a medium-large load in it, because it flat up will not wash. You can put a level on it, and it shows leveled, but it still wont operate worth anything. My wife is so put out by it at this point that she has even talked about getting an old ringer washer (seriously). Sears keeps coming out here because we had purchased the extended warranty and truly if they had simply replaced the washer after the 2nd trip to the house, they would have more than paid for the replacement washer even. Instead, they keep coming, looking at it, then having to order parts, and then come back a couple weeks later to put the shipped parts (which sit around our house), back in to repair it each time. All the while, we go without a washer or barely can wash any clothes. We have even taken clothes to the laundromat during one of the repair instances, because we cant just have mounds of clothes piled up for their month-long service. It is ridiculous how little it seems that Sears and Whirlpool care about their customers. I have gone to Whirlpool and Sears Home Services sites and complained at both. I have called both of their 800 lines in the past and again, this yielded nothing to truly depict either company cares. It just goes to prove that customer satisfaction is far less valuable to either of these companies than the bottom dollar profits in our opinion. I dont know where else to post our concerns/frustrations, so anyone can see how put out these two companies have caused us and dont care, but if anyone knows of anywhere else I can post blogged concerns, please let me know.I have complained previously about a dishwasher that we had purchased that we had numerous issues with. Those complaints fell on deaf ears to Whirlpool and really Sears as well. I dont think all the washers are duds, but this one has been nothing but trouble, and Sears wont just replace it, Whirlpool dont care. I have been given the runaround that it is because there arent three (3) service calls in a 12-month period for the exact same issue. Well, I am sorry that it doesnt appear to be just one thing! I have had it with these services calls, parts having to be ordered, only to hit the crazy repeat button again every time! This is far from good customer service, in my opinion, but rather a way to ensure the most profit is achieved! Thanks.Sears and Whirlpool have the worst customer service ever!

In the middle of the evening the door glass spontaneous shattered with nobody around. Its only a 3 year old microwave builder installed in a new home. Ive always heard Whirlpool appliances are garbage but this proves it 100 percent.

We spent a lot of time researching to make sure we were making the right choice, found the one that was right for us. When it got delivered there was a problem though, the plastic scratch protector film they put on the doors for delivery left an adhesive residue that looked like dull spots all over our new shiny black doors. I immediately opened up the owners manual to see how they recommend removing this blotchy sticky residue, assuming we werent the first ones to ever come across this problem, unfortunately they only provide generic cleaning tips. So I went to their website and found what I was looking for. I tried all of the cleaning methods they provide, none of them even came close to working. So I grabbed some adhesive remover and tried that, it worked great to remove the residue however my microfiber cloth (which they recommend explicitly) started leaving scratches all over the finish.I called the customer service to see about getting a new door delivered, thinking this wont be more than a 5 minute phone call since I had followed all of their steps they provide both in the owners manual and on their website. Heres where I find out that their policy DOES NOT cover scratches/cosmetic damage, period. I tried reasoning with them, I had them read their own recommended cleaning procedures, and we both concluded that I had followed their procedures to the T! You might think that if the all of the typical procedures didnt resolve the issue, that would be the point where the customer service reps would have the ability to make a decision that satisfy the customer, you would be wrong! They kept telling me over and over that their policy doesnt cover cosmetic, therefore there was nothing they could do. It was delivered with a defect of sorts, how is the customer responsible for that? The only way I can see it having worked out in my favor is if I had never tried to clean it myself and immediately called customer service, I still fear they would have given me the same line of cosmetic damages are not covered even if I would have tried each procedure with them walking me thru it over the phone. Lesson learned, I will never purchase another Whirlpool product!

Whirlpool Cabrio Washer and Dryer - I have had all of the problems that all of the other 900 people have complained about! The washer does not wash anything properly. I have even experienced having something such as a bit of cereal stuck to a dishcloth and it was still on there after a full wash cycle. All of my whites are now grey and stained. All of the sheets end up with a huge dirty ring the size of the tub in the middle of them. Everything comes out in a tangled mess of knots! Very frustrating! Everything comes out smelly as if its been sitting in the washer for days. Nothing smells fresh and clean like it should. Energy wise, we are using two and three times the amount of energy as I am washing and drying things for two or three times over, which brings me to the dryer. I put one single load in and it takes two or three cycles to dry it properly. This is unacceptable and I cannot believe that we cannot get some satisfaction from someone in this regard! We bought our set from Sears and I feel that they obviously know of this problem and still continue to sell Whirlpool products! Weve all been taken for a ride and Whirlpool should be held accountable for ripping people off this way. Someone please help!

We have had this microwave 3 years. The first thing we noticed was that baked potatoes were way overdone and nothing heated up correctly when using the sensor Not a big deal - just stopped using the sensor button. Now, we keep getting the open/close door message keeps coming up. I have done all the recommended fixes with no luck. Now we need to have a repairman come out to fix it. It seems when you are paying over $300.00 for a microwave, it should last longer. If I had known it would be such a poor quality, I would have bought a less expensive one and definitely a different brand. We do not use a microwave on a daily basis, so it certainly did not crap out from overuse. I would not recommend this to anyone. Save your money or you will be spending much more on repairs.

Whirlpool Duet Washer Trouble. Im having the same issue as Tom in Oakville. The F35-Sud errors pointed to the pressure sensor - NOT. 2 parts, a technician visit, and $800 later, Im still waiting on a Main Board replacement that is on nationwide back order. Time frame unknown.

We purchased a gas range (Whirlpool AccuBake model # mfgxfg361lvt1 serial ry1810956) a few years ago and have been very unhappy with the gray grids that it came with. We wrote to you about how we should clean them and you recommended heavy-duty degreaser, pin31552a and gas grate & grill cleaner, pin3167a, which we purchased. Neither worked, even with heavy elbow grease. We are very upset. We have purchased Whirlpool products all of our life and would like an answer or some type of explanation. If possible, can we get the grids in black? We try our best to keep these things clean and this is a very bad patten.

We built a new house less than 2 years ago that included maple hardwood floors and upgraded Whirlpool appliances. The ice maker jams frequently, fresh vegetables freeze despite raising the temperature to 45 degrees and 2 service calls that didnt fix this. The latest problem is the worst. Ice built up in the bottom of the refrigerator and leaked out destroying our solid maple flooring. They are coming out again to service the problem, but who is going to pay for our swollen cupped floors?

I have a Whirlpool oven and dishwasher and have had nothing but problems with them both since day one! Our oven went out Christmas and couldnt get service on it and we were entertaining for Christmas. DONT EVER BUY A WHIRLPOOL PRODUCT!!! If you do you have no one to blame but yourself.

I have owned two different Whirpool washers over the last several years, and they have both been a very big disappointment. More than that they have cost me money, time, and peace of mind. The Duet was my first experience with a Whirlpool appliance. It was a front load that I replaced the water pump on twice and constantly had to take the front bottom piece of the washer off to clean the trap on. It had been taken off so much that the machine actually just fell apart. It also had some type of mold or mildew problem where it made the clothes smell. It was a constant headache.I was stupid and allowed a salesperson from HHGregg to talk me into purchasing the Whirlpool Cabrio washer. Another huge mistake. Again, cost me time, money and peace of mind. I have owned the washer for a COUPLE OF MONTHS, and the clothes that I have washed smell so bad that I cannot use the washer anymore. I tried to call customer service, but it is impossible to get any help because the lines were so backed up, I have not had the time to sit and wait for an available person. Not to mention there is an extensive process of pushing lots of buttons before you are put on hold to presumably talk to a human being. I assume this is because so many people are having so many problems with their Whirlpool appliances. It is not surprising. I bought a new washer, a GE. It is awesome!When I have the patience and the time, I will try to call Whirlpool again and see if they are willing to do anything about the washer that at this point is just sitting in my garage taking up space. I spent around $600 on a washer I only got a few months of use out of. When we moved it to the garage, we could hear water swishing around, which explains the horrible smell of the clothes. Once I started having the issue, I went online to see if this was an easy fix, and it turned out that LOTS of other people are having the exact problem, to the point where people are trying to get a class action suit going. Do yourself a favor and avoid the hassle of dealing with this company. If you purchase a Whirlpool washer, I guarantee you will be sorry. Trust me, I was stupid enough to do it twice. Hope this helps someone avoid the headache these appliances have given me.I will never buy Whirlpool again. And by the way, Maytag is made by as well as the following: Admiral (Canada), Chambers, Coovert (acs), Crosley (newer fridges, a/c, washers), Danby (8, Estate, Inglis, Ikea, Kenmore (see Sears), KitchenAid (4), Kirkland, Maytag Epic®, Roper, Speed Queen (Canada only), Sub Zero (undercounter ice makers), Whirlpool.

Purchased Whirlpool refrigerator model #WRF532SMBM & a new dryer on 11/14/15 from Community Appliance in Middletown, NJ. Waited 3 wks for delivery. Worst purchase ever! Very cheaply made. There is a 1 space between shelf edge & walls all the way around. Put a lb. of butter on shelf & it fell down to the bottom. There is no butter keeper which allows orders to be absorbed by open butter. No egg keeper. In the freezer, the bins are wire baskets. So far I have dropped a bag of frozen blueberries & they fell to the bottom of the freezer. In French door bottom freezers it is almost impossible to retrieve items falling through. Ice packs fall through, very poorly designed. Very loud, supposed to have a water filter in upper right corner for easy access... its not there!Called Whirlpool, waited 20 min. & all the rep could say was, So sorry youre not happy. Asked if modifications could be purchased or made... nope. Asked to speak to quality control, a supervisor, anyone that may be able to give some satisfaction. Nope. She was making notes of all my complaints so they can be passed on to engineers for future models!!! Had a rebate offer, rep transferred me to that dept... cant/ wont honor it because 1 day too late. KitchenAid, Whirlpool doesnt care once they have your $. NEVER again. Ill shop Kenmore products from now on.

I have the Whirlpool Gold microwave model GMH3204XVQ-1 manufactured in May of 2010. The plastic around the lower door handle is cracking (currently in 4 directions from the handle) and the plastic on the side of the control panel is cracking in the center area and lower side. Neither of these area experience abnormal stress in day-to-day use. Unfortunately I could not get a good photo of the other crack on the lower corner of the control panel but included the one on the side in the middle. I contacted Whirlpool customer support about 1-2 months ago and to date, have not received any type of response or concern from them about this issue.

I bought a commercial coin operator washer (Whirlpool washer model CAE2743BQ) for $800 and after using it for 4 months the washer stop working. The main board panel lights turned all and the washer did not start. Called Whirlpool several times and nobody could help me and told me to look online for a distribution center to get parts. The customer service only knew about regular washers not coin operator. The washer had only 3 months warranty from Home Depot and I was supposed to pay for all the repairs and Whirlpool would pay for parts. So far I spend $400 in repairs and the certified technicians could not repair the washer. They replaced the actuator shift, the main board etc, etc and nothing. The technicians reset the washer at least 10 times, calling Whirlpool tech support and the washer worked for one load and the main board lights stayed on all over again, the start button did not work. I sent a letter to the warranty department that I got online and they told me to call the same 1800 that I had called at least 50 times in the past year. Now it has been more than one year and the machine is defective. Technician said could be the soap that my tenants are using, or overloading the washer or an electric problem that they cannot identify. I gave up... I will not buy a coin operator heavy duty washer from them again. I requested a return authorization for a defective product and I did not get anywhere. Thanks.

Approximately 2 years after purchasing a Whirlpool Gold Bottom Freezer refrigerator, I noticed cracks/openings on the interior walls on the ledge that holds the glass shelf! It is completely Crushing the styrofoam inside the refrig? Also, signs of being Cheaply made veggie bins are held in place by a piece of plastic that cracked after a few months. This was in 2011. First, I contacted the service contract people. They told me this was not covered under the policy. Next, I wrote & called the company. The walls show the styrofoam stuffing in the refrig. The shelves rest on these openings in the vinyl walls of the refrig box. This is a disaster and the refrig was 1400$$$. I have extended warranty which does not cover structure!!! What can one do with a New expensive refrigerator that has cracks in the Wall of the refrigeration box? Is there a class action suit anywhere that I can join?

I have had to replace soap dispenser three times and it is broken again. I also have to use the best soap or my dishes are dirty. It is three years old and is now leaking. I would never buy this brand again.

The machine never allows enough water to clean the clothes and I do not have the option to add more water or to spin the clothes again. The maker of this machine must think that people do not have the ability to know how to wash clothes or think for themselves. I need a washer that I can tell to add more water or just spin these clothes again. Very disappointed. I need an older model that I can control.

We have a small space that fit a washing machine and figured we could add a dryer on top but didn't have an outside vent, so took a chance in this model. It fit perfectly in the space and saves us from a regular trip to the laundromat. It takes a bit longer to dry but is energy efficient.

This is truly a piece of junk! My water heater is 2 1/2 years old and the pilot light will not stay on. Was told that I needed a thermal coupler and paid $30 for shipping. Installed it and still the pilot light will not stay on. Was told again that I needed to replace the main control. Another $30 for shipping. Had that installed and the pilot light stayed on but no hot water. The light was blinking 4x (temperature too hot). WHAT!!? ALL I GOT WAS COLD WATER! Now I was told I need to replace the temperature sensor and they wanted another $30! I told them to I was going to junk it and buy a different brand.

I purchased a stainless steel side by side refrigerator and unbelievably the doorshelves came crashing down - they just cracked in the middle. How cheap can stuff be made, those fridges are not cheap. I thought Whirlpool was a good product - I guess not.

Whirlpool ADP100 wh. A few programs, washes well, dries ok, not great but ok. Standard free standing size, 60 x 85 x 59 cm. The washer itself is fine, but oh the cheap moulded plastic parts, utensil basket, water arms etc, so poorly made. Its amazing that a company would use such poor quality and design to save what can be a few cents on the overall product, personally I was disgusted at the cheap crappy plastic bits.

I purchased the Whirlpool washer and dryer three years ago and I absolutely wish that I hadnt. After three years of use, the bearings on the tub are shot. I need to replace them but it will cost $400.00 to repair. This is the second time that this machine is for repair. I am going to dispose this machine and purchase a new model other than Whirlpool. The overall performance is poor and not as advertised. It does not use enough water and does not wash clothes well enough. At times, you can see that the water never reached parts of the garments. I am totally disappointed in its value and quality.

Purchased electric double oven range WGE555SOBS02, from Lowes end of 2014. Couple months it came on by itself, middle of night, 879°. Repaired panel 3x, then Lowes replaced stove, middle 2015. 6/26/2017 error message F2E1, control panel... stuck / shorted key. Out of warranty. Lowes and Whirlpool both claim no previous complaints. They will send repairman to assess problem, $150.

Oh my goodness, are these people right with the Whirlpool Ranges. I moved and put in the appliance # to get what I had from Whirlpool. What a piece of crap I got in a range and refrigerator. Never had appliances that looked so pathetic. You cant clean the outsides or the insides. Outsides nothing but streaks never look shiny, I really do doubt they are even close to Stainless steel. My old ones I might add were less than 5 years old when we sold our house and all you had to do was spray with Windex and shine shine shine. Try that on the new ones streak streak streak, and nothing ticks me off more than looking in a kitchen and looks like pigs are running all over your stuff. Then the range aqua lift self clean. You have gotta be kidding. No self clean about it. Scrub Scrub Scrub by hand. You mean who in the hell came up with this. Make something with fat and instant burned mess. Really oil and water or grease and water where I come from they never mixed, and all they do is get gummy. Now if you dont care how your oven or outsides look then I guess it doesnt matter BUT I DO, I am with the guy that said he just wants to throw it out. I would have been better off buying a clean your own. At least you could use oven cleaner. I dont know where these companies are coming from ripping people off this bad, now that I am older I am stuck with it and can hardly clean it to get down in there. You make supper and you have to spend 2 hours extra in the kitchen scrubbing the damn thing. Of course you give a company loyalty and get screwed this bad. All my self cleaning ovens I had when we sold houses the people thought you never cooked in them. This is not even a year and a half old and looks like it is 10 years old. Even scrubbing it is a joke. You cant get it all anyway. Im sure I will not live with this long. I use to love to cook even did it for a living and man using this thing I hate cooking more than ever.

Whirlpool Cabrio 6600 SW2 - Somehow a coin or two (?) are under the tub. It is not a high pitched sound. Just sounds like the machine is rubbing against the tub or something when it is being used. It does an excellent job of washing and spin drying the clothes, but the noise irritates my wife, which then irritates me. I took the top piece off and can see a coin DOWN there, but cannot reach it. Must I turn the machine upside down and try to shake the coin(s) out?

The Whirlpool washing machine I bought is a piece of crap! I only do laundry every 3 weeks/3 loads and the machine broke in 13 months. Now it has broken a fourth time/same part - I have had the machine for 5 years and they can not do anything about it. I will not be buying Whirlpool again - of any kind.

Whirlpool’s water heater coupler. Our plumber came to our home and explained how there was a problem with our type of water heater from Whirlpool that had been sold from Lowe’s between 2000 and 2006. We purchased ours in 2004. I have the receipt. Our plumber stated the underneath screen was clear and in good shape. He also said they had other water heaters with the same type of problem and those companies had provided the new part free and free shipping due to the suit. Whirlpool has not. We have been without hot water for a couple of days and we are hoping to have the piece by tomorrow. Since this suit has already been dealt with, then how do I get my money back from Whirlpool for being dishonest with requiring me to pay? Do I need to file something? I have followed the links and I have been researching it and our model number and serial match the product that was found faulty.

Our new Whirlpool Side-by-Side Refrigerator is very versatile as it serves the needs of a busy, family kitchen. It is heavily used storing cold foodstuffs to feed our family of four, plus two active grandsons. Being able to re-configure the shelving space enables us to adjust the main compartment accommodating items of different sizes (think a thawing turkey or a 24-can case of soft drinks!) to ensure our most functional usage. The same can be said of its freezer space - it too features built-in slots to reposition shelving for varied size packages and boxes. Convenient in-door water and ice dispensers round out the beneficial features of this attractive appliance.

We bought a new brand Whirlpool, ice berg, 2 door refrigerator in 2006. It worked fine for 6 months and then started giving all the problems. Until now, we have repaired it at least 10-15 times with company servicemen and also private repair shops. We are just so tired and frustrated will all that we have gone through because of this fridge. Today, the main door just came out and it is probably the 16th incident. We are hardworking people and take a lot pleasure and find lot of happiness in buying something new. It took us almost 2 years to save money for this new fridge with cost us about Rs. 20,000. But I should mention this that we have already more than Rs. 10,000 in repairs.I am sure this would just be another email in one of your inboxes but wanted to write this and convey the message that we are hurt. We do not want to take any legal actions as middle class men in India do not have the resources to do that. But I would surely not buy anything of your brand going forward and would not suggest anyone for it. Writing this in assumption that you understand the pain middle class men goes through to but something worth Rs. 20k and spends another Rs. 10k for repairs. We had high expectations from your product but that was not to be.Following were the problems we face in last 4 years: 1. Refrigerator not cooling (5-7 times); 2. Top door broken (1 time); 3. Main door broken (1 time); 4. Water leak problems (5-7 times). I hope someone will read this and forward it to concerned department.

Water saver does not provide enough water to wet the clothes. Even deep wash cycle does not provide enough water. This is right from the start. We should have returned it the next day rather than trying to learn how to use it wasting time so it could never be returned. I rated them as 1 star because there was nothing less I could have given them. DO NOT BUY ANY WHIRLPOOL PRODUCTS.

I purchased a Whirlpool duet, model #wfw9550ww00, two years ago with added warranty. The machine stops mid-cycle. The time remaining flashes but no error code. Pressing start would begin the machine again. Sometimes, we could go several loads with no problems and other times it will stop three or four times in one load. Occasionally, pressing start would not work and the machine would require unplugging and restarting. We have had several service calls in. They have said it was the pump, then it was the motor, then it was the pressure switch, and yet the problem persists. They are due to come out again tomorrow for yet another examination to determine its cause. Its the third time in one month. Its a lemon.

I love my washer and dryer but am a little disappointed in a few areas. First, my washer stopped spinning normally after a few years, I forget exactly why. Then my clothes were too wet when it was done. My dryer then did not get my clothes dry in one cycle. Also, it was going to cost $500 to fix my washer which wasnt worth it. But Whirlpool did send us a new tub and all the parts for free. Thankfully my husband is handy and after finding a YouTube video, replaced it all and now it works again. My dryer still doesnt always dry everything all the way. I often have to do 2-3 cycles in the dryer to get my clothes dry. I thought there was supposed to be a sensor that would keep the dryer going until there was no more moisture. Maybe that is broken too.

Electrolux dishwasher model EI24ID50QS - My husband picked this dishwasher after reading all the good reviews. However, after having issues with it, I tried to post my review and it would not post. I think Electrolux is somehow only posting good reviews and leaving out the bad. I had a technician come out to see why it took 6 hours to go through the cycle along with not cleaning the dishes well. He said I needed to run hot water before starting the cycle and that I needed to prewash my dishes before loading.In other words, its not a dishwasher but a sanitizer. Keep in mind that I rinse my dishes before loading, so I dont have food particles stuck dry on my dishes. So, I used his method of running hot water before cycle is started. It works ok when you dont use your kitchen faucet during the dishwashing cycle. However, the minute you use your faucet, the dishwasher runs for 6 hours! This is the worst dishwasher ever! Not to mention, the control panel is so sensitive that if you accidentally touch a cycle to start, you cant get it to cancel. It is ridiculous. Dont buy! It will be your biggest mistake.

I paid about $400 for this dishwasher and the regular price was over $600. Got a good deal. It washed dishes wonderfully. All I had to do was scrape the chunks off. It cleaned the rest. BUT... at a certain point, it started NOT cleaning. It was only about 6-7 months old. It was to the point where everything just came out kind of slimy and food grit was re-deposited on the dishes. I cleaned both filters. I made sure there was enough Rinse-Aid all the time. I ran hot water in the sink before starting to make sure the temp was hot enough. My husband went online and someone had instructions about cleaning the water intake because it could sometimes have sediment buildup. Not a difficult process, but there was no gunk in the intake filter. When I listened to a load it seemed like it drained, (most start with that), paused, rinsed for a couple minutes, paused, drained, paused and refilled for the wash cycle. So the pump worked, the arms went round and sprayed. Nothing was in the way of the arms. After it started the wash cycle, it seemed to just stall. It would spray for about a minute and then stop. Im not sure it sprayed after that. The timer kept counting down. It said dishes were clean, but it was an absolute waste of time. I was ready to go buy a cheap dishwasher and throw this one in the dumpster. I think it is a 720 padm??Just after my husband checked the water intake filter, we started another cycle. When it was rinsing, he opened it up and everything seemed to be working ok. It drained, then filled and started the washing cycle and then stopped. He opened it back up and surprise, the water was full on the front level by the float (that turns the water filling off). But in the back of the dishwasher, there was only about an 8th of an inch of water. Online it said the water should fill to just about the top of the heating element. It WASNT. Problem? It wasnt LEVEL. The instructions when installing said it should be leveled. We did when installing it (when it worked great). But looking back, we put in a new hardwood floor about the time it stopped working ok and we didnt put 2 and 2 together. We did not re-level. When we pushed the dishwasher back into its built in cabinet, it must have gotten OUT of level.The rinse part worked I guess. Then it drained and re-filled. After re-leveling the dishwasher, we opened the door at that point. The water was a level depth front to back and side to side. My husband explained what he thought had been the problem to me. When the wash cycle starts it fills, the float shuts off the water at the appropriate level. THEN... the dishwasher starts to pump and fill the arms and the tube up the back that feeds the upper washing arm. So much water goes into the arms and up that tube, the dishwasher looked almost empty of water again. As the dishwasher was now level, it began adding water to compensate for the arm/tube filling. Before the float would shut off too soon because the front part of the tub was full but the back wasnt. Without enough water, the dishes were NEVER going to/COULDNT get clean.The re-leveling made sure that the float didnt turn off the water filling until there was much more water, the CORRECT amount. The next load cycled all the way through, spraying much more than Id heard before and the dishes were clean. P.S. I also got some dishwasher cleaner and used that on a couple empty cycles. I NOW LOVE this dishwasher again. FYI If my husband wasnt handy Id have junked this thing. We HAD leveled the dishwasher when we installed it. Just didnt realize it COULD get un-level just pulling it in and out of the cabinet to install new floors. Check out all the troubleshooting stuff in the manual. But if it doesnt help, put a level inside across the bottom rack, front to back and side to side and make sure the bubble is in the middle of the two lines.The previous dishwasher I had, just made like a fountain of water that went up the middle of the dishwasher into a sort of funnel filling the upper arm. THIS one has that tube up the back and it curls down under the filter and Im guessing it is more sensitive to being OFF LEVEL, because the tube doesnt go straight down, it curls and lays across the bottom of the tub. Without being level, there was never enough water to suck up that tube to start the the actual wash cycle and it just stalled there till the timer said clean at the end. IE: dishes never did wash. BUT IT DOES NOW! Woohooooo!

We bought a Whirlpool model WFW5620HW front-load washer at Lowes. The unit shook so violently during part of the spin cycle that the Whirlpool-authorized service company technician said not to use it while parts were ordered. It seems the balance ring was not functioning. Parts ordered were shocks and tub assembly. The technician suggested trying to get a whole new unit, as the repair is so intensive he had only done one or two in his career.Whirlpool customer service said they would not replace the unit, and an escalated request had the same response. I think this is terrible customer service - when there is such intensive failure in the unit, they should provide a brand new machine. The work has not yet been done - we are without use of a washer for an unknown period of time, since the order of a tub assembly is so uncommon that they do not have a time estimate. Needless to say, we will never buy Whirlpool again, and suggest you do the same.

I purchased the Whirlpool washer with the expectation of having at least clean clothes. In fairness, I do wash some pet items but they are done separately. My clothes at time come out dry in spots because theyve not been touched with water. Forget the balancing issue. What I will have to do is wash, rinse, and repeat. This will be my life until I can get a new washer. Never again Whirlpool.

Come with a new home. I dont like them. Piece of junks doesnt worth the money. I have them since a year now. Take too much water, dryer inefficient, consume too much energy. Every product from LG are good. The one coming from GE and sub cie as Whirlpool etc. are very cheap. The door are cheap, you feel the quality the first time you use them, very noisy, consume a lot of energy, broke after one years or less, you got leaks from the pump.

I purchased my Whirlpool Gold series french door refrigerator 3 years ago. I bought Whirlpool because it being an American company and a brand I thought I would be pleased with. Wrong! I have had nothing but problems with this refrigerator. Thank goodness I bought the extended warranty! Just a year old, my ice maker stopped working. Then, the refrigerator stopped cooling. Circuit boards were replaced, fan motors, etc. over $1500.00 in parts and labor and the entire summer to have it fixed. This past August, ice maker stopped working again. Then, stopped cooling. I am now at week 6 without a functioning refrigerator. While I am thankful I have an extended warranty, through the store that I purchased this refrigerator, I am not thrilled with the amount of time that has passed between each visit and the fact that it is the exact same parts that are once again being replaced. This refrigerator is a LEMON. Do not buy this brand.

Do not ever buy a Whirlpool refrigerator. Sloppy construction, bins dont close, doors dont seal well and a brand new fridge doesnt cool to a safe food zone. When we call for service, I got the run around for almost 2 hours. They wont be sending anyone to service a brand new unit for an entire week... And thats 2 days before Thanksgiving! I have never had an appliance made this poorly. We dont have the space for a bigger unit, so thats why we bought this model. Size shouldnt impact quality!

I purchased a (second) Whirlpool washer (WFW87HEDW0) in October 2014. Since purchasing (and to this day), I manually dried the rubber gasket after completing my daily washes, knowing that mold growth was possible. I wash one to two loads of clothes about three to four days per week. During the first year, I did not notice any mold in this area and was confident that the manual drying and cleaning with Affresh was preventing mold growth. However, at the beginning of this year I discovered a little mold growth, which has slowly been increasing, in the inside lower lip of the rubber gasket. The image attached reflects mold in its current state. I was very surprise to see this happening since my diligent cleaning has been thorough and never ending. I even remove the soap dispenser tray to clean and air dry it outside of the washer and leave the washer door open at the end of the daily washes for extra fresh air circulation. This is my first official complaint about a Whirlpool front loader washer, even though I previously owned another (GHW9200LQ0) before this one and had mold growing on the rubber door gasket but, unfortunately, never officially complained about that old machine. Now, I dont qualify for the $500 compensation because I never officially complained three times within the first five years of owning the old washer. To my dismay, I did not immediately realize I had mold growth in the old washer. It was only until years later that a repairman told me that I had mold growth in it. In addition to telling me the price of replacing the rubber part and replacing a broken water pump plus labor would cost as much as buying a new washer. Before purchasing a new washer, I researched and read many reviews about Whirlpool and other brands before deciding on this new Whirlpool. I decided to give Whirlpool another chance and to follow their recommendations on the proper cleaning of the machine. Once again, I am disappointed and angry with Whirlpool and, now, have to figure out what to do with my current situation.

The bottom of the drawer collects water and freezes and then overflows onto the floor. There is no drain pan under the refrigerator. Then the freezer collects frost over the food, and walls of the freezer. I have to unplug the refrigerator and let it thaw and then plug it back in. This process is repeated every week. I have had it less than 2 years!

I have a brand new Whirlpool washer (Model WFW9640XW). It has been broken for 3 of the five weeks I have owned it. The Whirlpool cusotmer care cannot get me a working part in order to fix the machine. I am being told that I just have to wait until they find the part, with no end in sight. I am held hostage now that they have my money. I am told there is nobody I can talk to to break this impasse.

I have a Whirlpool Duet Steam Washer that will be two years old in September 2013. It has been making terrible, loud noises during the spin cycle for a few months now. Repair tech told me it was the bearings and very costly. It will cost me over half of the original cost to repair a less than two year old washer. This is my second Duet front loader from Whirlpool. The first one was a drum issue and the rod ended up snapping. Again, very costly so I bought a new one. I should have learned my lesson the first time. I do not agree with extended warranties and it is just an additional money maker for the manufacturer. They should be making the product so people do not have to purchase those. Anyway, back to the washer at hand. I refuse to spend that much on a newer washer and will never purchase a Whirlpool product again. I will let this thing bang for as long as it is going to last. Unfortunately have also just purchased the dryer that matches this washer since I still had the old model Duet Dryer, so kind of stuck with them. Spent an hour and a half yesterday on the phone talking to people at Whirlpool and they really dont care if you have an issue or not no matter how old your machine is. They just want you to have purchased the extended warranty or forget it. There should be a recall and they should be helping these customers who all seem to be having the same issue. Done with them!!

I purchased this washer (Whirlpool Cabrio HE) 2 years ago against the advise of many people including my husband due to the cost, $850 for what is now no more than a large paper weight! It had never really done a good job at cleaning our clothes. About 6 months ago, it started not spinning enough to remove all the water from the load. I thought, no big deal, I will just use the extra spin cycle. It became the normal thing - wash, spin, extra spin. Well, then it became wash, spin, extra spin, extra spin. I noticed 3 months ago that it was not even agitating. It fills up, sounds like it is agitating and then drains. There was no movement from inside at all. All along I am getting from my husband. told you not to buy it! I gave in and called the repairman - $185 for a console, $26 for a sensor and $55 for a couple of drum clips and then the $35/hour for the repairs. I would rather spend a couple hundred dollars and buy a washer with an agitator that really works. I would never recommend this washer to anyone!

I have a Whirlpool AccuBake gas range. I started by contacting my local repairman because my stove was out of warranty. The first company came out 3 times and replaced three parts, which didnt work. The cost was $297.00. I originally paid $598.00 for the stove. After they deemed it non-repairable, I contacted Whirlpool. They basically said it was my fault for not buying the warranty. I then contacted the BBB. Anne ** from Whirlpool contacted me and had another Whirlpool service tech come out at no charge to me. But guess what, they deemed it non-repairable too. Its a shame that companies no longer stand behind their product. Its very apparent that this is a manufacturers defect. They should replace the stove.

Just purchased Whirlpool top load large capacity washing machine with no agitator at Lowe’s three months ago. I sit at the kitchen table in my freshly washed exercise clothes and smell body odor. There were six exercise items in the load and supposedly enough soap. The load washed for 45 minutes last evening. Yard work clothes washed yesterday are not clean. I had to remove grass from the bottom of the tub. When I iron my smocks for work, since I work with animals, I pick pet hair off of them as I iron. Judging from other reviews, this torture won’t last long, before I need to replace this piece of junk. My last washer lasted 20 years. If it didnt leak water, it would still be running. Thanks Whirlpool, I guess the joke is on me!

Will never buy another Whirlpool/GE product again. Nothing but problems. Paid $1700 for a Whirlpool/goldstar refrigerator 2 years ago. Problems from the start with slide-out shelf cracking, evaporator fan burnt out within 2 years, digital display cannot read anymore. Now have another problem again - not cooling. Going to the trash. No wonder your stock price have dropped. I would sell off to. Whirlpool/GE have been going down hill for the last 5 years. Maybe more. Cheap products, do reflect, it just a matter of time, I would think you would address these issues in your product line, but it shows your company is all about profits instead of quality of products. Keep going like you are, and you will be bankrupt. Cheap overpriced and nothing but junk in any products you manufacture.

I submitted a complaint several days ago about my 3-year old Whirlpool Duet washer not working and costing $550 to fix. I decided to just replace it so my husband unhooked it this morning. We were going to to try to sell it on Craigslist as is. I pulled out the laundry detergent compartment to clean it because I had filled it with detergent and fabric softener the other day. The smell that came from inside the washer where the detergent is dispensed was awful. I looked inside and it was completely filled with mold. I had periodically run the clean cycle with bleach but apparently this did nothing. I am writing this second review to warn people about this. I am going to just trash the washer now and I hope this has not affected our health in any way. For those of you who are thinking about purchasing this washer or one similar, I strongly urge you to stick with the plain old top loader. That is what I am going back to.

Inconsistent freezer and frig temperatures, with vegetables and fruits freezing in the fridge, even when temperature is properly set. Freezer control knob and vents too easily blocked. Unit is very noisy.

The ice maker freezes up at least once a week. It requires removing the bin and chiseling the ice away. We have had repair here twice, and it still happens all the time.

Purchased a black Whirlpool refrigerator, Gold Series, Model GB2FHDX WB 22 cu ft. with bottom freezer from hhgregg. Within one month I had water on my floor, ice buildup on bottom freezer floor. I had previously reviewed fridge and noise was a concern but I thought I could live with that. I contacted hhgregg. They would do NOTHING, told me to contact Whirlpool. The 1st repairman said it was the ice-maker. I DO NOT have an ice maker. He fixed a duckbill. 2nd call 6 months later, same problem with water, serviceman replaced duckbill. Next year, 2011 same problem with water on floor and ice buildup on freezer bottom floor. After numerous repairmen I contacted Corporate Office of Whirlpool. They sent another repairman at their expense. We are now 6 years later and I am having the same problem. Dont buy a Whirlpool Gold & dont buy from hhgregg.

I have owned a Whirlpool Cabrio model no. WTW7800XW2 washing machine for less than 3 years. The plastic frame for the top glass lid cracked (on the right next to the spring loaded hinge). After reading that other people have had a similar problem, I contacted Whirlpool about this and talked to its TN call center representative. I requested that Whirlpool repair the appliance free of charge since there is a known defect with it. She said Whirlpool would only offer me a 50% price reduction from the retail cost of the lid plus charge me shipping and taxes. I will not be buying another Whirlpool product as a result.

I purchased a Whirlpool brand refrigerator from PC Richards two months ago. The compressor has stopped working causing my refrigerator to stop cooling and in turn all my food has gone bad. I reached out to P.C. Richards and they immediately credited me a check for the full amount of the refrigerator, with the option to get a new one delivered to me. I asked P.C.R. customer service if I would be credited for the food in my fridge and they suggested I reach out to the manufacturer. I reached out and, to my dissatisfaction Whirlpool will not credit me for the loss of the food in the refrigerator. I am completely disappointed. As I mentioned before I purchased the fridge 2 months ago. This is clearly a manufacture issue. I purchased a lemon and I am getting no support from Whirlpool customer affairs department. As a person who works for a reputable company in the purchasing department, I will see to it that we never do business with this company again. A company that doesn’t stand for anything or even compensates their customer for a faulty product should not be in business. Forgot to mention the customer affairs rep. Offered me fifty dollars for my troubles. Which I turned down. Besides the fact that fifty dollars will not cover a third of the items in my fridge, money is no longer the problem. It is the lack of customer service for purchasing one of their appliances. I am completely disappointed and will never recommend or purchase this product again.

We had our microwave and stove delivered in October, 2015. We had 4 deliveries of the microwave. The first two were damaged, the third needed a new fan motor and the door was not straight. They wanted to send parts to fix but we could not see spending all that money for a brand new microwave to have parts put in. I complained a lot to both Whirlpool who would not replace it and ABC Warehouse who finally agreed to replace it with a brand new one. The 4th is good. (so far).Our stove has a flaw in the glass top, the drawer doesnt close properly, and there is a piece of metal sticking out from the lower right side of the oven door. ABC says they cannot do anything about it and Whirlpool says it is under a parts warranty so it has to be repaired. I even spoke to supervisor Kimberly at Whirlpool. Got same answer. We are very angry and disappointed. As I told the Kimberly, Whirlpool got every penny they asked for. We paid for brand new in perfect condition and got a stove that needs fixing. We will never recommend Whirlpool as a Company for appliances and based on all the negative reviews Ive read, neither will a lot of other people.

Bought this 18 cu ft refrigerator this year. Only 3 choices for temp. Everything freezes, milk has crystals, ice cream is soft. Buyers remorse! Old ref was a Whirlpool. Wished I would have given others a chance.

The Gold Series Whirlpool dishwasher has some cool features for changing the configuration of the shelves, etc. After that its all downhill. Poor washing, worse drying. In the past 6 months Ive tried: less dishes, redistribute them differently every use, lower/raise upper shelf, use liquid detergent, powder packets, drying agent... nada. Absolutely NO remnant of food can be on the dishes. Of course I rinse everything well prior to loading washer; this one wants them CLEANED. I dont give a flying fig how loud a machine is as long as its doing its job. This one quietly does very little. AND the genius who designed that horrid cutlery basket needs a new job.The basket slides onto the inside of the door, making it difficult to reach into; it can sit on the outside of the lower tray but it falls off at the slightest disturbance. The baskets are narrow with hinged lids; the lids have small and medium slits so items are placed individually. If your cutlery is the right size! Ours is a little wide in the handle, they dont fit and must be placed into the opened, narrow baskets and butt up against each other. We are only 2 folks, I cook one meal a day and run the washer TWICE because bowls and pots take up the entire space, so I either wash the remainder by hand or keep the sink full of dirty pots and dishes. LOVELY. Bring back the old washer!!!

My oven is less than 2 years old. The blue enamel has had cracks for over a year & was told its cosmetic & theres nothing that they can do about that. Now its starting to pop off. I found a few slivers in a vegetable dish! Now I cant even use the top oven because of this! It seems to only affect the bottom of the top oven. I feel that the temp may be getting too hot for the blue enamel which is another safety concern. I have contacted Whirlpool/KitchenAid to be told that if they send out a repair person he would just use a marker on chips. I was told they would give me an employee discount from $3000 to $1800 to replace but I would have to act right away for that price! Really? My oven is only 1 & a half old.When I started researching this problem I am having I found many complaints of people having the same problem! As a consumer I feel so mad & frustrated that they are not doing anything about this since its an ongoing complaint from so many dissatisfied consumers. I do believe it is a safety & health risk now that its showing up in the food that has been cooked in that oven. I would urge anyone thinking of buying a Whirlpool/KitchenAid cobalt blue enamel oven not to! They will not stand behind their product & you will have to replace at your own expense. Shame on you Whirlpool!

I have a Whirlpool refrigerator and it is the 2nd one in 12 months. The first one the refrigerator was freezing food in the fridge part and thawing food in the freezer part. After several times a technician came to try to fix the problem and arguments with Whirlpool. They finally replaced the refrigerator. The new one is now doing the same thing. I am contacting Whirlpool tomorrow.

I purchased refrigerator in 2010 through Sears. The freezer door began collapsing (like the air was being sucked out) and Whirlpool sent a replacement. I should have known at that point - they had over 20 in stock instead of making it to order with a several week wait as the rep expected. I complained again (out of warranty for the refrigerator, but less than a year for the replacement door) and was given the too bad, so sad - next question routine. Now the freezer wont hold frozen food. If I turn up the dial, I end up with frozen lettuce, etc. So much for Whirlpool! Im not so much angry at this point as I am talky - at the grocery store to perfect strangers, at church, etc. Im disappointed that Consumers didnt respond - they still rate Whirlpool fairly high - makes me doubt Consumers, too.

It was on sale and the price was good for comparable refrigerators. The biggest problem is that instead of a simple dial to control temperature, you have to be a computer genius to figure out how to turn it to a different temp. even by the instructions. And the ice maker throws ice all over the floor even if you hold the glass up against the top. When I first got it, it made a very loud noise when it run, but that changed with time to a bearable volume. Everything seems to work well other than those few little things.

0 stars. The refrigerator coil keeps freezing. There seems to be no defrosting, there is no element to do this so it freezes every 5-6 months. No warranty. I bought it as is but seems to me a function it should have isn’t working. They should fix them. Ill guess it’s just business, hope theyre ok with St. Peter’s showing them the way down to hell while he’s saying it was just business.

Whirlpool W8RXEGMWQ01 leaks - It looks like the seal is not tight around the freezer box. They blamed it on my floor but I think its because the door sags. The door needs to be lifted about 1/2 to fit snugly into the freezer box opening. They came out three times but couldnt fix it, then they said it was my fault. Then I finally gave up.

I have had my refrigerator for more than 10 years. It is a standard refrigerator with no extras and I have never had any problems with it. I think things that dont have too many extra built into them are better with not so many things to break down.

I purchased this Whirlpool dishwasher from Sears on 3/25/2010. Then on 8/11/2012 the dishwasher completely failed to operate. I called for service and they checked it out and they found out that the control board had failed due to moisture getting into the electronic components. They replaced the control board & control panel and the dishwasher has worked until today (2/08/2014) - 17 months, and now exhibits the same problem. The original repair costs including labor was over $400. Not really acceptable and demonstrates very poor quality control and design @ Whirlpool. As of now, I am considering whether to purchase a new machine (obviously neither a Whirlpool or Sears product). As part of the original service the soap dispenser also failed and had to be replaced. I believe Whirlpool should be responsible for some of the repair costs.

Last December our refrigerator began to freeze food - gallons of milk, bowls of food, and produce. I called Whirlpool: Of course the warranty had expired. It was suggested we turn the unit off back on to reset the computer. We did this for 2 or 3 months and eventually it worked properly. We were gone for 12 days, now the icemaker has stopped and all food is frozen. I called - they will send a tech for a minimum of $95. Read how many trips are usually made before a problem is solved. Cheaper and more logical to buy another unit from anyone but Whirlpool.

This Whirlpool Water heater was purchased through Lowes on March 29, 2011. This past weekend, water started leaking out of the thermostat/natural gas control located on the side of the tank. I called a plumber to take a look. He stated that a new thermostat/natural gas control was needed. Although the tank has a 12 year warranty, this item does not. Whirlpool did agree to replace the part but would charge me $30 to overnight the item which still would have taken 4 days because of a weekend. To install the item would have cost me almost $500.00.To purchase a new Rheem Water heater was $999. I chose the second choice as the first choice would have still left me with a subpar water heater obviously already out of warranty. The reason for my review is that I saw the number of complaints on the failure of this part. When I purchased this water heater, it was the better model due to the 12 year tank warranty. What use is the tank warranty when the other items dont last? There should be some type of reimbursement but Im not holding my breath. Please buy a contractor grade water heater and not the cheaper models.

This $1,000+ Whirlpool Cabrio washer high-efficiency machine should have lasted between 10-15 years, not 1, not 2, not 3, not 4, not 5! To expect less is to fall for the consumer cave in - where you just give up, give in and buy another. The Whirlpool tech just told the appliance repair guy that was here that the repair would involve a recirculating water pump and a bearing, and would cost $481 to repair. The appliance repairman said he is not in business to condemn appliances, but said he has a Kenmore top loader at his house. Simple, no electronics and less things to go wrong. Well after researching brands and reading reports, I thought I was buying a machine that would last at least as long as my second hand Maytag. Whirlpool has not heard the end of me. I have heard several other people say the same thing. Repair bills are huge and machines do not hold up. So much for buying quality. Now Im going to contact the MA attorney general for the states implied warranty, which means if you spend your money on any appliance, that appliance has an expected lifetime of service. A $1,000+ machine is not expected to fall apart after a few years.

11 months after purchasing my Whirlpool 40 Gal Gas Water Heater N40T61-343 I woke to cold water one morning and found the LED flashing 4 times - high temperature shutdown. Unable to find any reset I called Whirlpool and after a couple questions, was sent a replacement control unit. Happily it arrived 2 days later. I was told then that it was because I had residue in the tank. I had no idea how he determined that because none of his questions even touched on that. Anyway, I had hot water.Nearly a year later now to the day and again I have no hot water. This time the pilot burns very weakly when I try to light it and then goes out. After three attempts I get 7 flashes on the LED - Gas Control Valve Failure, part of the same unit I replaced a year ago. Am calling tomorrow since its too late to go through any tech support steps over the phone that Im reading about on this site and seeing on Youtube. Honestly, I didnt replace the last heater because I had nothing better to do than replace parts on this one annually. No, I will not purchase another Whirlpool unit especially after reading all of the similar if not identical issues others are having.

The W/D combo-Cabrio is crap... Dont buy it. Salesperson @ Lowes told us all washers moving away from the agitator to ones like this so we bought it. The washers does not clean everything - does not use enough water to clean - leaves your delicates so wrinkled and clothes in general beat up. The dryer decides when it thinks your clothes are dry when they are actually still very wet... very noisy. Whirlpool must have sold out because quality integrity sure is gone.

After happily using Maytag washers at my old address for 30 some years, I moved to my current address and in 2006 I purchased a new Maytag. In 2010 I needed service. I was advised it had a bad bearing and was not advised to repair as it would cost well over $600.00. I purchased a Whirlpool Cabrio top loading HE appliance.The Cabrio worked well until one day it made a horrible noise. Although it still worked, I called for service and was told it had a bad bearing and would cost $670.00 to fix and they advised against it. After the service call, it never worked again. I know things dont last like they used to but 4 years is ridiculous. I have been advised that Whirlpool bought Maytag. Is this what to expect from so called reputable companies?

I had purchased this washer from Lowes last September and had problems almost immediately. First of all the lid would lock and hold my clothes hostage till it decided to reopen which could be days. Finally it never opened again. Called customer service and sent someone out. It took almost a month to get it back to running. 1 week for him to show up then 2 more weeks for the part to come in 1 more week for him to grace me with his presence again. Had to call again because the mother board then went. Another month. Now just out of warranty I go to wash and its dead. No lights on nothing. This machine is the biggest pile of garbage and waste of money I ever spent. Barely made it 1 year.

I love my Whirlpool gas stove and oven. We opted for the convection feature as we are a family of 7 and often need multiple items in the oven. This was a very useful detail. I didnt know I needed that. I now cant go without!

Our fridge was delivered the 24th of Jan. We called on the 19th of June because the fridge stopped working. The 24th Capital Refrigeration came out and said he ordered the parts, they would likely be there on the on Fri. the 28th. On the 5th the parts werent in yet. On the 5th of July I called Whirlpool to find out whats going on and the parts were on backorder. They would expedite the parts. The parts came in the 12th. Our Whirlpool refrigerator was delivered on the 24 of Jan. It quit working on the 19th of June so we called Lowes. They hooked us up with Whirlpool. They sent a tech the 24th. He (Mike with Capital Refrigeration) left saying he ordered the parts and they would likely be in on that Friday the 28th. I call Lowes on Mon. the 1st. They hooked me up with Whirlpool and they said the parts were being shipped that day and should be to Capital Refrigeration on Fri. the 5th. I called on the 5th and now the parts are on backorder (they didnt know they didnt have the parts). So the parts came in on the 12th. Capital Refrigeration came out, installed all new circuit boards. That didnt work, still no fridge (he suggest replacing the fridge but Whirlpool says no). So he orders new parts. He comes out on the 17th and installed new parts (coils and stuff). It worked for 3 days and quit again, I lost my food again. I call Lowes again. They hook me up with Whirlpool. They say theyre sending a different company. On the 19th A1 Quality Appliance calls, set up appointment for 23rd. The come out and say they are ordering the parts on the 25th. They say that Whirlpool said parts would arrive Mon. the 29th. On the 30th A1 Quality said the parts arent in but they have us scheduled for Wed. the 31st. NO PARTS. I called whirlpool and now I find out again they dont even have the parts again (they dont know they dont have the parts). They are on backorder and in a week call them to see if they have found the parts yet.So at the end of a week (the 7th of Aug.) Whirlpool said to call and see if they found this part yet (maybe not). It will have been 7 weeks without a fridge that broke when in use less than 5 months. They have told us the parts would be here 3 times and then find out all these parts have been on backorder every time. The 1st repairman Mike at Capital Refrigeration advised to replace the unit but they are still dragging this out. They did send us $150 for the inconvenience (not for all the food we lost). It would appear it will be 2 months before we have a refrigerator again if we are lucky. Whirlpool is a very poor company that has misled us several times and are still doing so. We purchased their refrigerator, double stacked oven, microwave and dishwasher and are very sorry. They say they record the calls if there is any doubt about my facts.

Updated on 02/13/2021: Company fails on customer service. My stove’s trim is rubbing off on my Whirlpool stove only 6 months old. No chemicals were ever used to clean the surface. This trim piece surrounds the controls and is not covered under warranty. An expensive cheaply made stove. Multiple attempts to have the piece replaced got nowhere. A letter sent to the head office was deferred back to customer service. Whirlpool has lost credibility and I will no longer buy their products.Original Review: So disappointed to find the paint finish coming off the trim on my 8 month old Whirlpool range. No harsh cleaning chemicals were used. Only mild dish soap and a microfiber towel. The trim, attached to the control panel on the front of the stove, is not actually stainless steel, but painted to look like stainless steel. Whirlpool warranty doesnt cover esthetics and refused to replace the trim, stating replacement would include the entire control panel and it is not covered under warranty. So be prepared to have your new expensive stove look old in a matter of months.

On July 30, 2009, we purchased a Whirlpool Gold French door refrigerator with the freezer drawer on the bottom. It was delivered on August 1, 2009. On August 3, 2009, the ice maker and water dispenser stopped working. After three unsuccessful service calls and the installation of various replacement parts, Whirlpool gave up the effort to fix the ice maker and water dispenser and delivered a new replacement refrigerator on October 15, 2009. Todays date is April 14, 2012 and here we go again, the ice maker and water dispenser stopped working. Luckily, I purchased a five year warranty on the unit. However, after reading all of the posts about fire hazard issues and other various issues with Whirlpool refrigerators, well probably go out and buy a new refrigerator and write-off the $2,500 that we spent for this refrigerator as a bad investment. We purchased a Whirlpool refrigerator based upon their reputation of providing sound products. However, based upon this experience, I can guarantee the folks at Whirlpool that our next refrigerator purchase will not be a Whirlpool product or a product of any subsidiary of Whirlpool.

Cabrio Washer - I am so disgusted with this product. After only a few months service came out and the repairman told me it was normal for a load to run for 8+ hours. Second repairman replaced the circuit boards and it has lasted 11 weeks. Now it is not working again. Calling tomorrow. I have a bad feeling about what the end result will be. Expect I will be buying a new washer, will not be a Whirlpool. Just went and tried what another reviewer does to get it to run... Pause/start/pause/start. After 8 tries it is now running. I will not live with this. Not going to spend a dime to fix this piece of garbage. Still have 36 days left on extended warranty.

I purchased this Whirlpool Aqualift oven at now bankrupt HH Gregg so my recourse is limited. I loved the look of the slide in range and the salesman raved about the quality of this appliance. First the ceramic top is a nightmare to keep clean, not mentioned at purchase. The Aqualift feature is totally useless. I use my oven on a very limited basis. Putting water in the bottom of oven does absolutely nothing to clean oven and even less on sides and oven door. I spent a substantial amount of money on this so called self clean oven and I am so disappointed in results. It does not get off even a minimum of spots, I would hate to have something actually spill over. Aqualift does not work and then you are advised to not use anything else to clean it, so what now?

We have all Whirlpool appliances in our home as well as our rental property. All of the appliances are of great quality and perform extremely well. The dishwashers are both heavy duty and do a tremendous job of cleaning the dishes. Both have a jet dry feature which is extremely important to us.

Never worked proper form the start, always condensation, bottom froze and top unthawed and vice versa. No help from store or company. During any temp change the fresh food would freeze and top unfreeze and no matter how long you waited and changed settings. Junk.

If you want clean clothes dont buy this machine(Cabrio Washer)! First of all I find that my clothes have dry spot on them when I pull them out of the machine. Whirlpools response is that the machine spins at such a high rate that the cloth will actually seem dry. Doesnt make sense to me that a shirt that has another garment on top of it gets dry in an unexposed area. I have also been told to always use the high water setting. This helps but the clothes still are not clean. Also my dark slacks come out with residue lines on them - Whirlpools solution; never wash anything in cold water. In addition the machine is very noisy. It sounds like the water pipes are being kicked out of the wall. And forget about washing a king size comforter as advertised, a twin comforter doesnt get clean or even thoroughly wet and residue lines are left behind. Hate this machine! So glad I didnt buy the extended warranty since my attempts to have them stand behind this product have failed. I feel the money would be better used towards a different brand.

I bought a new washer thinking I was upgrading. Wrong!! Well the new so called technology they put into these machines is overrated. They took a good thing and instead of advancing they have took two step backwards in time. I wish I had kept the old washer I had. I think I would rather use an old time wringer washer my great grandmother used. They are probably faster by hand. This new Whirlpool grabs every string on my hoodies and twist my clothes so tight in knots. I cant even remove my clothes until I fight and get mad enough to write a review. Whats up with these new washers?? Get rid of the slots on the Agitator!!

I bought a Whirlpool Cabrio Top Loader High-Efficiency Machine on March 20, 2013. 14 months later, it failed. When I called customer service I was informed the 1 year warranty had expired (I knew this already) and that all they could offer me was a $319 extended warranty to fix machine and guarantee covered future repairs. Luckily, I had the machine repaired at no cost to me after complaining to the sales people I bought the machine from the year earlier. They contacted their Whirlpool representative who had the repair covered. Now, 3 years and 11 days after purchasing it, it failed again. This time the machine would no longer spin out the water. Whirlpool offered nothing more than to give the website and special code for a discount on a new machine. After some haggling, they agreed to pay for 50% of the parts only, no labor. I argued this machine must be a lemon, as they have told me theyve heard no prior issues with this machine and that it would be reasonable to replace this machine. They refused any further assistance. So I threw this piece of junk away and instead, for $185, bought a simple rebuilt 15 year old Maytag washer with agitator, direct drive. Just a couple of knobs. No computer, fancy bells and whistles. I can say with absolute certainty that I will never purchase a Whirlpool product ever again. I also believe these machines are no longer meant to last like old washers (and dryers) used to.

I needed a new washer and dryer, as I sold my other ones with my last house. I have been so happy with the economy of a front loading washer, and the clothes really dont require pretreating because Tide and the washer take care of everything!

My washer is at least 15 years old. When we bought it we had two school aged children at home. My husband and I now have an empty-nest and we have not had any service calls or break downs since we purchased this machine. It still cleans our laundry very well and we are getting our moneys worth from this washer.

I purchased (from Lowes) a Whirlpool water heater in 2010 unaware of the recall and problems a lot of customers were experiencing. I have changed (6) thermocouples the most recent yesterday 2-10-2014. The heater still does not work. Is there any compensation I can receive at this date. If Lowes were aware of the problems with the heaters, how can they still in honest sell these water heaters to the public.

This is the worst washing machine Ive ever purchased. Bought 12/19. The water level never never goes up high enough, to cover the cloths. I have to add water no matter what setting. I hate that. The sensor isnt working. You arent able to adjust it yourself, its computerized. The water shuts off when you lift the lid so you cant rinse out the soap or fabric softener caps. I hate that. The lid locks when the rinse cycle starts so I have to unlock the lid to add fabric softener. Why lock the lid so soon, wait till its in spinning mode. Really really badly designed!!!! Will never buy anything by Whirlpool ever again!

I purchased my Whirlpool refrigerator last Summer and so far I’ve had no issues, no probs! I love the energy efficient refrigerator along with its easy settings and options to use a ice maker. Wouldn’t trade my Whirlpool for any other brand!

Have dishwasher wdf530plyw6 less than three years. Will only run on 1 hour cycle. No other wash option works. Called company, wont fix, offer other warranty plan. Utensil holder broke early on.

I have had my Whirlpool gold series dishwasher for approximately 10 years and it still does a great job washing my dishes. Recently, I found out if I forget to put a dish into it I would have to start the dishwasher all over again rather than it taking up where it left off. Also, the interior is badly stained and unable to clean it.

Purchased Whirlpool fridge in December of 2013. I have had repairmen at my home over 10 times for repairs after warranty expired in December of 2014. Purchased extended warranty and still have to wait over a week for repairs through local Whirlpool service tech. Ice maker has been problematic from the start. Either it makes a bucket in 3 days time or it makes none. I will not buy another.

I have automatic Whirlpool washing machine since 3 1/2 years I am using. Now 2 times electronic board came problem so how many times can change like this? Why they are manufacturing if they cannot solve this problems? Should not sell in the market. This all not coming free and need to struggle. Whirlpool products all very bad appliances.

Machine just will not clean clothes. Model Cabrio W10560169A. Company offered NO support. This washer retails for around $1,000 and just does not work!

Never again will I purchase any Whirlpool product. I was seduced into purchasing a Whirlpool dehumidifier by the sale price at Canadian Tire. Big mistake! It worked as expected for four months before all the refrigerant leaked out - we found this out later. I contacted Whirlpool and was told I could take it to their authorized service depot (a 50 minute drive from here) for repairs. I did so and was charged $44.80 for them to troubleshoot the unit. Two weeks later they told me that the refrigerant had leaked out and it would cost $563 for repairs. For a $200 unit!! Get serious! I pointed out, according to my Canadian Tire receipt that the warranty was for 5 years on the compressor and sealed components. After further collaboration between the repair depot and Whirlpool, I was told that my warranty is not with Whirlpool but rather with the company that produced the unit for Whirlpool, namely Hisense and that the Whirlpool repair depot did not do warranty work for Hisense. I then had to fax the technician report to Hisense to get an authorization number for a replacement unit from Canadian Tire. Once armed with the authorization number, I had to visit my local Canadian Tire store and pick up the replacement. That unit worked well for about nine months before it failed. Considering service depot charges and all the driving involved, it cost me something like $100 for a warranty replacement (not including my time). No more fooling around with this junk. I just ordered a Kenmore dehumidifier. Hope that one is a better investment. I see now that Canadian Tire no longer sells these units. Maybe they figured it out. Judging from other Whirlpool reviews, it seems I am not alone in my views. My recommendation - stay away from Whirlpool!

Cabrio is our washer and dryer. Dryer had no issues in the last 7 years. Washer constantly throw UL or unbalanced error and stops. Rearranging clothes only works for another few minutes. First time under warranty, tech came and fixed it. Second time without warranty, I cleared some loose socks between the tub. Third time same problem. YouTube suggested to change the springs on four corners that hold the tub. $25 and problem fixed. Basically, if you are not an informed consumer you are screwed for $$ silly stuff.

I originally purchased a Whirlpool hot water heater in 2005. After numerous problems Whirlpool agreed to replace January 2010. With the new hot water heater, everything was fine for the first two years. Now about every 6 months, we are having the thermocouple and the igniter. Each time you order the part, the part is free but you have to pay $30.00 for shipping. I am tired of dealing with this. We have decided even though we still have a warranty left on the hot water tank we are going to purchase a different one and never ever buy another Whirlpool product. They do not stand behind their products.

We had to buy a new fridge in 2000 because ours broke. Following consumer reports, we went with a side-by-side Whirlpool gold and was it pricey! Within the first five years of its life, we had to replace the fan twice...the bar that separates the fridge and freezer could have fried an egg--it was so hot! When I had to replace it the second time, I pitched a fit to Whirlpool and they could care less! Now I see that the inside wall of the fridge section has cracks forming! I know the average lifespan is 10-15 years but I still will say that I will not buy from Whirlpool anymore! Their stuff is very expensive and it just seems it has too many small things that do not hold up!