Model: Whirlpool Professional FF 32 Elite. Purchase date: 06/2009. Problem: Temperature maintenance issue. The basic need of refrigerator - unable to set/maintain temperature. The cooling system is not working! Poor customer service: Representative charged for visit. The representative is unable to find the root cause! Approximate expense of 4-5k with no guarantee of problem being fixed. Better go for other brands like LG, Samsung.

Whirlpool Cabrio Washer model # WTW6800WW1. Bought it July 2009 and it broke Jan 2017... 7.5 years old. Cost to repair $715.00. The technician recommended that I just go ahead and buy a new one... not worth the while to fix. I paid $900 for this machine in 2009. This is an expensive machine, not a cheap ass one. Shame on Whirlpool for selling products that dont last and for making it unaffordable to fix.

All of sudden, this expensive microwave stopped heating. Called whirlpool, they said they will charge $300 to fix it and $540 to replace. So much after paying new piece of garbage in 2-3 years.

I bought a Whirlpool model GI7FVCXWY00 over and under refrigerator directly from Whirlpool through DirectBuy on April 19, 2010. The unit was a relatively high-end model (over $2,000) that came with a 12-month warranty. Thirteen months after purchase and 1 month after warranty expiration, the ice maker stopped working flooding the kitchen in the process. We called Whirlpool who recommended one of their authorized maintenance subcontractors (GuinCo) to appraise the problem. GuinCo came out, diagnosed that a valve in the ice maker had gone bad and the repair cost us $364. We chalked that up to Murphys Law (repair needed immediately after warranty expiration). Not 4 months later, the kitchen comes up flooded again and again and the ice makers not working. We call GuinCo, the repairman come out and said this time that its a heater and ice maker defect which will cost $643 to repair. He also said that the unit has been designated as having a design defect. We held off on the repair until we could contact Whirlpool for some remediation since it has become obvious that the unit is a lemon. I called Whirlpool, laid out the problems, timelines and potential cost (ice maker failures are going to cost us almost half of what the entire refrigerator cost before the unit is a year and a half old) and the only response they had netted out to was: Sorry, you should have had extended warranty. This is a prime example of an American manufacturer, marketing an inferior product and offering the customer nothing when the lack of quality becomes obvious. I will recommend to anyone I know to stay as far away from Whirlpool products as long as I live.

Whirlpool gas range Model#wfg10h0ah1 with aqua lift technology. This is the biggest ripoff that was ever done to me. It say self clean, not it cleans and then you clean. This is fraud plain and simple. I am handicapped and made it very clear to the salesperson that it had to be self cleaning. 4 times I did the clean cycle and I was in shock, I called repair, I thought the self clean was broken. However this is the line they give you over and over, that its not broken. This is working the way it was designed to work. So they made a range that is self cleaning, but no it doesnt do that. For 899.99, I did not deserve to get duped like this.

We purchased a brand new stainless steel refrigerator in 2013. Our 2 year refrigerator stopped producing ice and the freezer stopped working as well. We called Whirlpool customer service and they said they could not help due to 1 year manufacturer warranty only. We called another company (SoBellas) that charged us $85 to tell us that it is the seal system which should be covered up to 5 years by Whirlpool. The man showed me the Whirlpool refrigerator warranty on Google which states the sealed refrigeration parts are covered up to 5 years. There was no specific model numbers listed which gave me the impression this was a standard warranty for all Whirlpool refrigerators. I explained the situation to Whirlpool customer service including the 5 year warranty that is found on Google for everyone to see. I was told that our refrigerator model number did not qualify for that specific warranty. We ended up having to buy extended warranty for $350 on top of the $85 we already spent. This started July 24, we had to wait until August 10 for Whirlpools warranty company to see us. They checked it and said they had to order parts but he supposedly tweaked it to make our fridge run better.... It made it worse and it ended up completely breaking down. We had to buy ice chest and waited until Thursday August 27th for them to finally come back with parts and fix the refrigerator. I took time off from work once again due to our time slot being between 3 and 5 but the guy didnt even show up until 7:30. I could have worked my normal hours instead of taking more time off! The guy never once called to inform us that he was running late. We kept calling the company to make sure we werent forgotten. The guy told us that everything should be working within 20 hours or so, by Friday our freezer was still not working and no ice either, back to square one! I called Whirlpool customer service once again to explain the situation, nothing could be done. The next available time for them to come back out is September 17 for them to come look at our refrigerator. We have been stuck without ice and a freezer, buying food every other day waiting for our brand new, horrible Whirlpool refrigerator to be fixed. Will never ever buy Whirlpool brand again! Actually, we purchased all brand new Whirlpool appliances... Good luck to us!!!!!

I have had this refrigerator for over 25 years and cant ask for anything better than that. Would buy another Whirlpool refrigerator. Has original french doors at top and bottom door on freezer. However, I dont particularly like the pull out drawer that the new refrigerators have now as I get so much more room with a door. The new refrigerators have improved rubber around the doors. That is the only thing I had to replace on this refrigerator.

We purchased our suite of appliances from Home Depot, this was a great experience. Unfortunately that is were it stopped. Our 1st refrigerator caught on fire in the electrical within the unit. We got a 2nd refrigerator sent to us and it came damaged. Then they sent us a 3rd refrigerator and it caught on fire in the electrical as well. Weve been dealing with this all since August 27th 2019 and here its now October 14th 2019. At this point I feel this model of Whirlpool is truly unsafe.

I bought a Whirlpool refrigerator water filter from the Marcone distributor. This distributor, whose name I received from calling the 800 number in your manual, did not send instructions on installation. I called Whirlpool and they did not have instructions on installation. The product is 4392949. In talking with your customer service department filters, I learned that the young man knew nothing about filters. He told me that the filter that I purchased was the wrong one. Its interesting that he tried to convince me without knowing my refrigerator model number. I asked if he wanted the model number and he said, yes, please. It was very sad how I had to do a song and dance with an idiot. I had no help from your company. I will return this water filter because I was not provided instructions for installation. Neither can your people produce them. For this reason, I will never purchase Whirlpool again.

Whirlpool Wash-And-Go washer and dryer - I purchased these new November 2016. Since week two, they have been a constant problem (i.e. not enough water to even get clothes wet, forget about clean; gulping soap from the dispenser; rubbing holes in clothing; putting rust on washed items). The dryer NEVER gets the clothes dry; no matter what setting they always come out damp, even after Ive put them through for two cycles.Three separate repairmen have come to work on the washer replacing sensors and the entire control board. It worked fine for two weeks, now its back to guzzling soap. (It is supposed to do up to 12 loads on one refill of detergent. I get two per refill. Ridiculous! Soap isnt cheap!) And, today it ruined brand new bathroom mats with rust all over them that I had to hand wash to try and remove without much success. At this point I would advise anyone looking for new appliances to try any other major brand and NOT Whirlpool. As soon as I can get the money, these are being junked and Im NEVER buying Whirlpool anything again!

I like the double bottom french drawers but I don’t like that the top door hinge covers are plastic. Also I wish there was more height inside the refrigerator for tall bottles and pots. The wheels are great for moving.

We bought our Whirlpool Cabrio in 3/09 from Lowes for $1000. Like many of you, we thought we were purchasing a quality product that we would use for many years. I never thought my clothes were getting clean, but I thought it was just because I wanted to see them floating in water. Its been 3.2 years and now were plagued with the code F51. Whirlpool is definitely aware of the many problems with these machines. They are also, obviously, unconcerned about the problems we are experiencing. Whirlpool will never stand behind their products if they dont have to. Please go online and write reviews everywhere you can. If we warn people and cause Whirlpool to lose a few dollars, they just might decide to stop selling junk. I plan on starting with all the stores in my area.

In 2008 bought cheaper Whirlpool washer, had to return it to Lowes. ELLL DUMOH (me) buys yet another Whirlpool Washer from Lowes; a Cabrio. The Cabrio ONLY worked 3 years, and started having problems with not emptying or just continuing to drain and beep. The Whirlpool Customer Service lady is pitiful. Yeah... I can SELL you another set of shock absorbers... that might help. I can SELL you a recirculating pump or a drain pump... Pitiful, sorry attitude. Goodbye Whirlpool.

This company should be avoided at all costs. Purchased 2 Whirlpool dishwashers in 2018 and in less than 2 year the top dish rack glide rail front wheel broke off causing the rack to drop down and render the dishwasher unusable. Warranty was one year and I went online only to notice that the OEM factory replacement part(s) are now made out of stainless steel (or aluminum). I also noted that the parts were made prior to 2015 (date on the video and other vendor sites) Which is a good 2 years prior to my purchasing of this product. This means that they obviously knew there was an issue but continued to produce and sell them with known faulty parts well after they realized at least 2 plus years when you consider that they would have had to re-tool, redesign and send to production prior to the product release date.So it looks like they have continued to sell the product knowing fully well they were defective and did so just to sell replacement parts or to use up existing parts inventory. Either way this means this company has no scruples and does not stand behind their product. Another stain on the reputation of products made in China! Shame on you Whirlpool!

I purchased a Whirlpool wash machine and dryer from Home Depot 3 years ago. From the outset we had problems with both units. Wash machine spin cycle does not work properly, and that causes a problem with getting clothes dry. Some soiled clothes will not clean properly and have to be hand washed. Dryer rarely works on one cycle, towels and bed sheets have to be run through a second cycle. These are NOT energy savers. Garbage product, I will never buy Whirlpool again.

Whirlpool - Back in the 1980s we had Whirlpool appliances that lasted for many, many years. We are now in our mid 60s and retired. We purchased a new home 2-1/2 years ago. Whirlpool appliances were provided with our new home. We were quite pleased at the time. However, we are now sorry we have them.We are very easy on everything we own. When we replace appliances, cars, furniture, etc. we are generally able to sell our used items, which are always in great condition. Unfortunately, this is not the case with our current appliances. I will list the many problems.Combo range hood/microwave oven: it vented absolutely nothing. The microwave oven had its own set of just plain silly issues with the manner in which the touchpad had to be set. The oven did at least work. 2/2013 we had a Broan range hood installed and vented to the outside and purchased a Whirlpool countertop microwave oven. Again we had the little issues with using the touchpad plus the door was very hard to open. This countertop microwave oven failed 1/2015, less than a year of usage. At this time we purchased a Panasonic microwave that is much simpler to use.The Smooth-top range/oven looks nice. It is the most inconsistent range/oven we have ever owned. You cannot lower the cooktop burners to simmer. There is no simmer. On that setting it may as well be turned off. I can set it at about 9 oclock on the dial and some days that may be simmer. Others days it could be higher. Overall, the burners have no consistency. The oven cools quickly and I must be mindful not to toss in a 2nd sheet of cookies without checking the temperature. I have never had to do this on any other oven we have owned.The dishwasher does clean my dishes, thank goodness. However, I have had 2 service calls (under warranty) for a little gasket (hinge pad) which keeps the door propped a bit while loading the silverware into the basket. This piece has failed a third time I will just live without being able to prop the door. And then there is the silverware basket. Each piece must be loaded, handle first, into the slots on the basket. Of course, some of my silverware has wider handles so this does not work well. Such a poor design.The refrigerator was my pride and joy. We paid the extra charge for the French door style instead of the side-by-side style that came with the house. My charges here are more serious. 2 of the little door shelves have broken. Oddly enough these are small shelves which have some items on them that are not used often. If I choose to replace them, it will cost me over 25.00 for each of these little gems. Now, a piece of plastic on the veggie drawer has broken so I must be mindful not to let the drawer drop.Worst of all was the last service call out of warranty. I had standing water/ice on the floor of the freezer. Apparently this was due to a poor design and my service man replaced it with a new P-Trap that actually works. Yes, the original design was bad, yet I still had to pay for the replacement. Seems like this should have been a recall and replaced free of charge. Instead my total charge was 144.06. UGH!!! Now, I do understand I was likely provided bottom of the line appliances with my new home, but to have issues with all of them is ridiculous.

Very reliable. Handle large large loads of laundry. Do not have to prewash any clothes. I will always use this brand.. My parents used this brand while I was growing up. There is no other brand I will use. Thank you Whirlpool!

We purchase all Whirlpool appliances for our new house in Florida in late 2015 from Good Deals Appliances. First repair before 1 wk in-house was the dishwasher. Wires were not connected. Now it is the refrigerator (French door refrigerator model K44913210). We reached out where we purchase the appliances and they gave a number of repairman to connect. He came and told us the compressor & evaporator & valve needed replacement, We found that hard to believe that a 2-yr-old refrigerator needed all this repair. Called another repairman to hear same thing. We were also told this problem is so common with this model. Called Whirlpool. They sent a repairman out. Said same thing first two said. They are paying for parts but not labor. We were told by last repairman that this refrigerator hasnt worked from day one. Passed info to Whirlpool and no comment. We paid a lot of money for an upgraded refrigerator to have it quit in 2 years. Totally not acceptable. On top of this the parts may not work for more than 2 years again. Okay Whirlpool who is going to pay for all the ice & dry ice, the other two repairmen that came. The repairman you sent was double the price of other 2 & will not come back till we pay. We will pass our experience with Whirlpool on to all friends and friends of friends.

My dryer lasted 18 months and then died! All parts have been replaced. $700 and highly rated, I dont know by WHO but would love to have a chat with them.

Another person with problems called this a giant Whirlpool paperweight and he is so right! I received delivery of a Cabrio WTW7800XW3 washer on December 17, 2011. I had an issue (stopped in the middle of the cycle and flashed the letter “F” on the control panel) with it on January 2nd. I called and scheduled service. I had unplugged the machine and a few days later I replugged it and it started to work, so I cancelled the service call. In March, the problem started again. It just adds a little bit of water and then stops. Since then I have had repairmen out 6 times with 8 new parts installed and the washer still doesnt work. Now, the control panel won’t work. Whirlpool refuses to replace the machine. The repairman says these are the worst machines (any of the ones that are top load and have a clear top) he has ever seen and that I should buy an extended warranty. He says the bearings in the tub wear out among other things. On one of the repair visits, the serviceman found a chewed up pair of baby pajama pants. The machine makes a really loud noise like a jet engine taking off whenever it spins and the clothes are not clean. Whirlpool says that the warranty does not cover replacement of a defective machine. I have since researched the machine and have discovered that there have been problems with this line of machine for years. So, why are they still selling them? I am hoping for a class action suit. The company should stand by their products. I will never purchase a Whirlpool (or any other brand manufactured by Whirlpool) product again. I have had the machine for 4 months and it has been usable for about 2 of them.

I replaced my hot water heater after 22 years and no problems. We got a 50 gal. gas heater from Lowe’s in 6/2008. In 1/2012, we had no pilot light and an alarm on high temp sensor. Whirlpool sent a new sensor and control valve to replace the bad unit. Here we go again, on 3/2013 - same parts same problems. We now have the cost again to have the parts installed for the second time. I have spent 1/2 the cost to have the parts put in than the cost for the heater. I will never pay for any Whirlpool product again. They are plain junk!

When you buy a global brand name you expect it to work the first time around. If not, then you expect to have it exchanged not repaired. The microwave did not work out of the box. They made me take it to the shop for repair. I would have expected an exchange for another one and an apology from the quality control guy who should have checked it. Apparently Whirlpool (Mexico) doesnt give a rats ass about their customer base. Its all about getting as many units out the door with poor assembly and no QC.

Horrible stove. Bought online. Get set up and its worst design ever. Have to lay down on floor to watch broiler. Cant even slide out. The stove top is difficult to clean. The cast iron grates are very heavy and have to move one side at a time. I Cant control low heat. Have to use back burner only. Then Crap builds up on back console. The oven grates are too wide apart, Have To supplement with racks from my other stove oven.

I bought my house brand new with all new Whirlpool Gold Series appliances. About a year and a half from purchase date, I started having issues with my fridge, then my dryer, then my washer, then my fridge again and that lasted about 5 months, then my microwave and my dishwasher. My microwave stopped working in January. It’s now April and I still do not have a new one. It keeps getting lost or shipped to the wrong address or something. Every time I call, the representatives don’t know how to look it up. I wind up on hold for at least 30 minutes, and I get transferred to at least 3 different people. I hope my last appliance doesnt break because I’m over Whirlpool, and I will never buy another appliance from them again.

I first want to begin by saying that we have been a Whirlpool family for years. I now own a Whirlpool microwave, hot water heater, washer/dryer, Jenn-Air stove and dishwasher. My problem now is with the Cabrio Washer purchased in 2008. I started having problems in 2011 and the same problem has raised its ugly head again. When I try to use the Clean cycle, it starts at a 60-minute cycle and goes down to a 2-minute cycle in 3 minutes without cleaning or even running water into the tub. This time, it made a terrible noise and stopped. The tub was replaced in July 2011 after having the same complaint as above. The repairman said that the mechanism on the tub to fit into the spinning cycle is made of plastic and is not holding up. Also, in March 2012, a new control board was installed. I spoke to Whirlpool Customer Service and they informed me that they did not have any other complaints about the Clean cycle and that I should call the repairman. Luckily, I purchased an extended warranty. I vote a thumbs down on the Cabrio washer.

We saw water all over my wood floor and traced it to the lower freezer unit of my 15-month old refrigerator/freezer. We had to call a repairman which traced the problem to a frozen defrost. He put in a new thermometer at the tune of $200 and now we have to deal with a wood floor problem on top of it. I purchased because Whirlpool was always known to be a quality product. I wont make that mistake again.

I have never posted a negative product review but must do so now. The refrigerator is 1 1/2 years old at most and has been well taken care of. I noticed today that the finish at either side of the bottom of each refrigerator door handle has a problem. I couldnt tell if the finish was pitting or is just discolored. I called customer service and expected that they would help, especially since we have an extended warranty. Representative number one told me that the extended warranty only covers problems that affect the function of the product. I spoke to her supervisor and then her supervisor. I got plenty of apologies but no support. I offered to send pictures, but they were not even interested in checking out the problem.After speaking to them, I took the handle off and I see now that the handle cut into some sort of film that exists on the metal. (I am not talking about the protective plastic coating that is on the the refrigerator at delivery.) The film is lifting off the surface and creating discoloration. If Whirlpool was at all concerned, I think this issue could be fixed with some sort of gasket to keep the metal handle from cutting into the surface. Im hoping the problem is static, but hard to say what will happen. If they had been interested in trying to understand the cause of the problem, it would have been easier to accept the limitations of the warranty. It would have demonstrated an interest in avoiding this problem for other consumers in the future. My last Whirlpool product. Period. Good luck if you decide to do business with them.

I purchased the Amana washer # NTW4560YQO 10 months ago - when I put on the warn setting I would get an alternate cold warm but a warm wash. At the beginning of July suddenly all I got was cold water. The machine is still under warranty so I called and I got an authorized repair person who came out and replaced the mixing valve.. then I went to wash clothes and yes all I got was cold water. The authorized repair person came out and could not figure why. He called Whirlpool tech dept and they told him it was working the way it was supposed to. Now it does not give any warm water so I do not know how the tech person can make that statement.They then sent yet another authorized repair person from a different repair company and yet again the tech person said it is working the way it is supposed to. IT IS NOT WORKING THE WAY IT WORKED WHEN I PURCHASED IT AND THE WAY IT WORKED FOR 9 MONTHS. When I called customer disservice they kept repeating, our tech people say it is working the way it is supposed to. Then they tried to tell me it was the ground water. I want to know how many others out here have had the same problem. I really feel this is a defective machine and I want my money back or I want compensation and an acknowledgement that there is a problem with their crappy machine.

I purchased an extended warranty with my product purchase and only a year and a half into using this brand washer the lid broke on one side at the hinge, it looked really rusty and like others I thought I was making a very decent purchase because all of my previous appliances were Whirlpool so figured Id keep up with the brand. Sad to say that was the worst decision I could have ever made for 13/1400 dollars for a washer with a light inside. Never again. They wouldnt even keep up the warranty because they said it was too expensive to repair it. Whirlpool is very bad for business...

Whirlpool Cabrio Washer WTW5000DW - I have owned at least two other washers in my life, and I just recently bought a new washer/dryer set at HHgregg. Was told they are doing away with agitator washing machines in the very near future so this is my first experience with a top load agitator-less washer. This thing is AWFUL!! First of all it took a minute to get used to the weird popping, grinding noises it makes while going through the cycle (which I might add seems to take FOREVER). The other thing I hate about it is there is no way to add the fabric softener at the start of the wash in this model unless you have a downy ball of which I have yet to find at my local dollar store or even the KROGER??? So I run back and forth trying to catch the rinse cycle to STOP the machine (wait I might add) and then add the FS manually.BUT THE ABSOLUTE WORSE THING is - my clothes come out with SPOTS that look like lint all over them, and they wont wipe off unless you have a wet rag to do it with!! AND YES - I have cleaned this washer TWICE already since January with the very expensive AFFRESH. I wear scrubs and they are solid colors, so it really shows up and I have to wipe off every pair EVERY day before I put them on then roll a lint brush down them. WHO HAS TIME FOR THIS??? This is on my SOLID colors which is easy to see, I can only imagine the GUNK that is on the rest of my laundry!!! I dont feel like my laundry is getting clean at all!! I am divorced and money is tight - I paid around $500 buck for this piece of crap. I am already seriously thinking of getting me another one - the OLD tried and true kind with an AGITATOR! And yes I am ANGRY. Can you tell??

We have just built a new home and have spent a ton of money on appliances. I so wish I had looked up the reviews on this Whirlpool Cabrio Washer before we bought it. It makes a very loud annoying sound through at least a third of the cycle (which I was just told by Whirlpool is the normal agitating sound). We have also had to have service out here twice in the first few months because some of the clothes come out dirty in areas that were folded over because of lack of water even on the high water setting. It also, ripped my favorite white blouse right in half. Trust me DONT buy it, you will be sorry.

Our new refrigerator was delivered on March 28, 2015. On May 31 as I was opening the door, the top of the bottom door handle broke. I was finally able to get a door handle shipped to my home and I replaced the handle. On July 21, I am opening the door and the 2nd handle breaks in exactly the same place again. Two broken handles in less than four months. Terrible design flaw in this door handle. Now, I am being told by a service representative that the handles are only warrantied for 30 days because handles are cosmetic.

Whirlpool washer is junk. Expired I. Less than 4 years. Cost to repair is more than new washer. DO NOT PURCHASE WHIRLPOOL PRODUCTS. Agitator motor burned up without notice. No troubleshooter problem. 2 repairmen suggested I buy new washer.

Purchased Whirlpool Gold appliances for a kitchen reno two years ago. Fridge and stove from a dealer and microwave from Lowes. Fridge - After one year the ice maker quit. $200 part plus labour. Seal on fridge door not sealing. New hinge and washers to adjust. $30 plus labour. Stove - three different stoves were delivered with the same paint flaw on the top of the control panel (3 inch section where paint did not adhere or was scraped off... Same spot on all three... clearly a factory issue). Stove door - when you touch it the interior light goes on. Warming button and switch was broken when purchased but didnt notice. Whirlpool wont warranty. $48 plus labour. Last piece in this puzzle... Microwave - magnetron went and wont heat. $300 plus labour. Obviously time to change brands. Now to figure out who is NOT under the same manufacturing umbrella.

Our just over 1 year old Whirlpool washer died completely last month (mid May). After calling them and being directed to the extended warranty dept (which we ended up purchasing), a repair guy came out and told us it was our main controller board. Three days later, he returned with the board and nothing. We were then told it was the user interface. They were on backorder until June 5, which means our machine would be out of commission for three weeks. I just received another call informing us the part was now on backorder until June 15. Whirlpool, on what planet is it acceptable for your appliances to be out of commission for six full weeks? Never again.

We had to have a sensor switch installed. We purchased this washer, plus the matching dryer June 10, 2010. This was just 16 months ago today.The cost of this repair was $160.24, for part labor and service call. The service call was excellent. Wish I could say the same for washer.We had previously owned a KitchenAid washer for over 20 years (before purchasing Whirlpool washer) and did not have to have one repair on it. Very doubtful I will purchase another Whirlpool.Looks like quality is a thing of the past.

We purchased this refrigerator towards the end of 2008. The entire interior of the refrigerator is imploding. The plastic Whirlpool used to frame the glass shelves is cracking and shards are falling off. There are 3 drawers; one has already fallen because the plastic sliders the drawer moves along has disintegrated. We noticed the small hairline cracks appearing some time ago but never thought they would go to this extreme. Apparently the plastic used cannot stand up to cold temperatures.I contacted Whirlpools chat and was told that the product is out of warranty and I need to place a service call to get new parts. I proceeded to email the CEO of Whirlpool, Mr. Fettig because I dont believe I should have to pay for a service call when its a manufacturing problem. I received a call the day after and was told the same thing; that they are sorry we are experiencing a problem but the warranty only covers the first year. I was told that if there was a problem with the plastic being inferior that they should have cracked in the first year. I responded that the cracks may have been occurring early on in the back of the refrigerator which is the coldest part but were noticeable.Its very frustrating because a refrigerator purchase is expensive and not something that I planned on doing a mere 5 years later. I believe that Whirlpool at the very least could have shown goodwill towards their customers and given at least some discount on the replacement parts or at the very least a certificate with an amount off toward the purchase of a new refrigerator. Its a win-win situation for everyone because the customer is still happy with their Whirlpool refrigerator and/or it guarantees repeat business for Whirlpool. Apparently Whirlpool doesnt care about keeping customers happy and want and/or need repeat business. Its the last Whirlpool I will ever purchase!!!

Plate in front of the door that is at the back of the water dispenser bowed out. Company will not fix even if the refrigerator is not a year old yet. Said it only covers things like this for thirty days. Do not buy a refrigerator that Whirlpool will not stand behind.

We purchased a new Whirlpool water heater April 2013 at Lowes and every 3-4 months the pilot would go out. My husband would simply re-light the heater, I guess he didnt think it was a big deal. However, in September 2014 the water heaters pilot went out and would not re-light, so I contacted Whirlpool about the warranty. It took 4 telephone calls (two of which involved a plumber, per Whirlpools request), and several days of cold showers for an authorization code to purchase a $8 part (thermo coupler). The hassles that Whirlpool put me through, no one should have to endure. Who ever heard of a technician telling you that they have to talk to the plumber, when you call them to explain a problem with your water heater, such as, the pilot will not stay lit and the plumber said it is the coupler (I couldnt remember the whole name of the part, but surely they should have understood what was wrong). Secondly, providing a plumber (unless youre married to one) to converse with them involves more money. Now I have a plumber at my house so I call Whirlpool and this technician insists that the plumber perform a test on thermo coupler to make sure that it was faulty before she gave the authorization for a new one. Yet again, when I called to Whirlpool with the plumber, while I was voicing my problems in resolving the issue of my water heater with this technician, and she just hung-up on me. So as not to be defeated and having already invested in the expense of the plumber, I called Whirlpool again and requested a manager. The technician asked if she could help and I informed her of my previous encounters. She apologized and took my information to have a manager to call me later; however, she did give me the authorization code for the thermo coupler without delay. When I went to purchase the part, I didnt have the old part (as trade; the plumber hadnt removed it), so I paid for it out-of pocket, to return the old part later.

We purchased the Whirlpool Gold Gas Range (model #GW399LXUQ06) in November 2011. Last week, I noticed the porcelain enamel finish on the stove top grates has fallen off in pieces. I contacted Whirlpool today, February 14, 2012, about this issue and they advised me it is a cosmetic problem which is not covered under the warranty. They advised me that it would cost over $100 per grate to replace. We have had this stove for less than three months and I feel these grates are defective and Whirlpool should be responsible for replacing them. I am very dissatisfied with this stove.

I bought a Whirlpool gas range in March of 2015. Three months later the control module went out on it. It was still covered under warranty through Whirlpool, so they send a technician out to fix it. Its now a little over a year later and the control module is out again. I call Whirlpool and ask them if it was still under warranty and if they can it fix it so they say, you want me to send a technician out. Why? I just assumed since theyre sending a technician out but there were going to cover it. Well the technician gets here and its not covered under warranty. And I now I have to pay a $90 service charge fee for the guy to tell me that the control modules out on it which I already knew. Hes going to charge me more than the stove was worth to fix it so I declined to get it fixed.

Do not bother purchasing Whirlpool refrigerators. Bought mine new in November. The paint on the exterior has been chipping. They inform me that its a cosmetic issue and that they are not going to repair it. They told me to use touch up paint. The paint has chipped more than once and Im afraid this is going to be an ongoing issue. Its obviously a product defect (my last fridge lasted 27 years without incident). I dont do business with companies who dont stand behind the products they manufacture. These days its all about get their money and the hell with them once we do. Last time I purchase anything Whirlpool.

We have ALL Whirlpool appliances in our home. This was our second home so we were not here to use these for a long time. We were preparing our other home and our parents home to sell. Our French door refrigerator is almost 2 years old and we live here now. My husband opened the icemaker door to see why we dont have ice. There was a wire in there. We called the local Whirlpool authorized service man and he said the wire is not hanging down to connect it. He tried to channel a new wire and said it must be crooked in there, he cant get through the insulation (no channel). He asked us if anyone had ever worked on it. We bought it brand new. Home Depot delivered, unboxed and set up. He said we need a new door. Whirlpool will not stand behind this! I am so disappointed! I thought I was doing the right thing. Good name, made in the USA. I was wrong! I definitely do NOT recommend Whirlpool!! I am so sorry that I spent so much money on 3 homes of Whirlpool appliances!!

I made the mistake of buying a whirlpool product and was wondering if there is a support group for angry unsatisfied customers? I have owned a duet washer and after 2.5 years is giving F1E2 error and is junk.

Very disheartening to know that an established company such as Whirlpool does not stand behind their products or acknowledge known product defects. Based on the quantity of complaints logged on this site alone, Id think a recall would be required. Identical to other consumer posts within, we purchased the Cabrio Platinum washer/dryer set (WTW8000BW0). Exactly 24 months to the purchase date, jet planes began flying through our home with the noise concentrated in the laundry room. The dryer has been fine; however, the washer is a whole other issue. The bearings are shot (as many users have cited) and the noise is deafening... even with the laundry door closed, TV on high, dogs barking and flurry of activity in the kitchen! We made a switch to the Whirlpool brand 2yrs ago due to reputation and longevity. Ooops. Lesson learned and $700 out the window. Back to GEs. If youre reading this and concur with our review, just remember... customers always have a choice! Unfortunately, Whirlpool will figure this out the hard way. Just like other iconic brands... Smith-Corona, Blockbuster, Polaroid, Nokia, Saturn, Pontiac/Oldsmobile, Sony and many others. There is typically a reason a company offers tremendous sales incentives (price cut, rebate, special financing) to unload products. We found out why. Thanks for the memories Whirlpool!

I had a perfectly good Kenmore range, but I didnt like the color. I purchased a Whirlpool 30-inch gas range at Lowes. I had problems immediately! The repairmen were at my house 6 times within the first year. My warranty expired and they wanted me to pay for an extended warranty. I refused to pay any more for this piece of junk! I fought with Whirlpool and demanded they either replace the range or reimburse me the full cost. They finally agreed, after many heated conversations, to replace or reimburse me as long as I promised not to purchase a Whirlpool product again. What kind of company would say that? A company that knows their product is defective and has poor customer service. I opted to take the new range that they promised wouldnt have the same problems. It is having the same issues as the original one. It shuts off in the middle of cooking and it is infuriating to say the least. I can promise Whirlpool I will never purchase a product from them ever again!

If 0 stars was an option, I would have chosen that. Ive had my own home for 34 years and have had many washing machines over the years. My Whirlpool Cabrio is absolutely the worst washer I have ever encountered. It doesnt get clothes clean and constantly gets out of balance. Whirlpool did a service call and said it is functioning as designed so I was unable to get a replacement. I really hate being wasteful and adding a huge appliance to a landfill but I will be replacing this machine as soon as it fits into my budget. I dont have a receipt to submit because it was purchased by my builder at my request. Do not buy this machine!

This product is unsafe and should be recalled. It has aluminium wires that connect the unit to the 220 Vol Power source. Aluminium and copper wire dont mix. I took a shower and was getting ready to leave for the day when I went into my garage to smell burning plastic and wires. I traced it to the hot water heater and discovered the wires in the Energy Smart were melted and burned. I checked with Two Electricians who told me that the wires in the unit can not handle the high heat and melt. If you have one get rid of it. Had I left for the day I would have lost my home, cars and pets. If anyone would like to see this unit I still have it and photos.

I got a new Whirlpool washing machine and dryer last year and Im very happy with both. I like the fact that it offers a quick cycle if you have a small load or need something quickly. If youre debating on what brand of washing machine you should buy I highly recommend Whirlpool or the other brands because Ive had really good luck with mine.

It does not clean as well as I would like. I have to wash the dishes before I put them in the dishwasher. It is also much too noisy for my liking. It has the pot wash and the dish wash. It has several types of cycles, long - short and it has a drying mode. My next dishwasher will be bigger so I do not have to run it every day. My next will be stainless. This particular dishwasher is nothing special but I have my eye on one with the buttons in the top of the door so nothing is visible on the surface. My dishwasher is getting older and I will replace it soon.

I purchased a Whirlpool cabrio mod. wtw5840bwo washing machine in Oct. of 2014. As of June 2015 I am ready to kick it to the curb. The washer works to it design and hasnt broke down but it doesnt clean our clothes. We load the machine, add the right amount of clothes and recommended detergents and 1hr later after the wash cycle is completed, the clothes still stink with the smell of daily perspiration. I went back to using our old washer that has a worn out agitator. It does a better job.

I purchased a new style topload washer (Whirlpool) without the center post approximately one year ago at Lowes and have had nothing but problems with it since day one. It does not clean the clothes and will not spin.

Whirlpool slide in range, microwave, dishwasher, KitchenAid fridge: All appliances, stainless finish, were bought with my home in October 2006. Range - Within the first year, I had problems with the outer plastic pieces breaking, the motherboard and the oven and broiler not working. The screws holding the knobs on fell out several times. The oven door was fixed several times this past year until finally it fell off and broke for good and now the oven does not work at all. Microwave - The rotisserie motor stopped working this past year. Dishwasher - Just after the first year, the outer shell of the door came apart. KitchenAid fridge - Within the first year, the temperature adjuster broke. The second year, the ice maker stopped working. This year, the ice maker broke again and the motor quit working twice already and all has been repaired. The freezer handle has fallen off as well.

I have an oven that is just under two years old - a Whirlpool. After less than a year, the sensor went out and had to be replaced. After less than one more year, the same thing has happened. They covered the first one, but wont help with labor or parts on this one. There is no user error. Its just a cheaply constructed oven.

Whirlpool WRT351SFYW 21.1 Cu. Ft. White Top Freezer Refrigerator - Energy... puts out a very irritating high pitch noise, unlike my previous Whirlpool fridge. The old one was perfectly quiet. I believe Whirlpool is going downhill in every way. WP is buying refrigerators from 3rd world countries and slapping the name on them. The delivery people were very rude with me when I was unable to give them a tip, even though I had to supply my truck to shuttle the fridge up to my house and help them unload it. I also had to go and find them when they would not follow my directions to my house. So, they kept the wrench I loaned them; they did not have their own tools for the installation. And they refused to return it when I asked them to do so. Denvers Customer Service refused to respond in any way to my requests for information or complaints about the noise and delivery. Finally, their head office contacted me a month or two later, and the customer service person had initiated the discussion in argumentative attitude despite my saying I did not care anymore, I gave up on them and dont expect anything from Whirlpool anymore. While she told me that there are standard levels of acceptable noise that come from their refrigerator, while, she refused to acknowledge that they are not my standards, and I am the customer, besides, I had an older Whirlpool fridge that did not make any noise. I am sorry trusted WP, when I tried to upgrade the old fridge - it was an expensive downgrade! Buy LG or Amana - wished I did!

This double door ice in door refrigerator works fine, my dissatisfaction is on the stainless doors. I am VERY particular on any smudges or points and I do not LIKE the stainless steel environment appliances promo!

Had washer since 2016. Have NEVER washed a load where there was not a problem from washer dancing to having clothes come out without water ever touching them. Would NEVER recommend Whirlpool! Tried to contact Whirlpool website to register a rating & even their website is defective - could not get through after several attempts.

I purchased this machine three years ago. It is junk. I have had two washing machines and they lasted for years and years. Never had a problem with either machine. I purchased them from Sears. When I the Cabrio, I was told it was the top of the line washer for Whirlpool. Three weeks ago it started making a noise like a plane taking off. It wouldnt spin the clothes. The repair person said that it could be three different things the parts, for which, would cost in the vicinity of $200. However, since it was making such a loud noise and water was coming out from underneath the washer, he was certain the transmission was out. He said the noise was an indicator the bearings were gone. I didnt see much point in repairing the washer if the transmission was out because it couldnt be fix.There was a couple at Lowes purchasing a machine at the same time as myself. They said they had a Cabrio also and it was only two years old. It wasnt spinning the clothes either and making a tremendously loud noise. They told us this before we mentioned that we had a Cabrio also. I will neither purchase another Whirlpool product. Junk!

I dont know the model you have but this exactly what I just had happen in May. Its what they call the jazz board that is behind the light area inside the front of the refrigerator, where the light bulb goes. This is a circuit board and it seems when connection arent happening properly the fridge wont go into defrost mode and the water freezes over the evaporator not allowing any cold air to the top but working cooling freezer and making lots of frost too. I paid $400 to Sears service repair. The jazz board itself, I kept the old one and you can buy it online for about $100 and a child can do the labor that I paid hundreds for because, like you, I didnt know what the problem was. It takes less than 1 min to do this. I was furious! I hope this helps you and I too will never buy a Whirlpool. I found this site looking for why the refrigerator is making very loud noises, very loud banging, clicking, humming. Its ridiculous!

I bought this washer because we are a family of 6 that washed a lot of laundry. I bought the extended warranty from Lowes but not sure if this thing can even be fixed. The guy has been out twice. Replaced the control panel. I cannot wash more than 3 towels or it comes unbalanced and goes crazy. I need this fixed. I am so irritated. A recall needs to happen.

Purchase at 2014 and still working and nowadays, they dont make refrigerators, washer or dryers to last more than 3 to 4 years. The quality of appliances, really such since the manufacturers are greedy. And after the 5 year Warranty expires, only Lowes buys back the the appliances and Home Depot. Their Warranty specifies that you have to purchase from them to replacement of an appliances if purchased from them!??? Therefore I would not buy any appliance from them. A refrigerator, washer or dryer, you can take parts from each one and build a whole new appliance, which is very disappointing! TO ME THIS IS BAD BUSINESS FOR AMERICANS, not all people know this by experiencing this yourself and I let people know about my experiencing this myself, manufacturers should make products in The United States of America???

New Oven installed Dec 28, 2020. Love it. Many new features in an oven. Both conventional and convection. Easy to operate using system similar to a computer. Its cool and we also bought a new microwave to match.

I have the same lid closure issue expressed by many consumers and whirlpool refuses to acknowledge this as an issue, only recommends purchasing a new lid at $225. Lid design is flawed, metal L bracket connects to plastic housing/trim/side of lid, causing glass to pop out and stress cracks between screws. New models of same washer have redesigned lid, no cross reference part number or dimensions listed to determine if new lid will fit.

Weve had our Whirlpool Cabrio washing machine for about 3 1/2 to 4 years. At first, it left our clothes wrinkled, so I purchased a steamer to help remove the wrinkles. After a few months, it started making a terrible clanging noise. My husband was able to repair and it ran okay for a while. Over a few months, it got louder and louder. It does not get our clothes completely clean. Some even come out dry on one side. Now, we are getting an F50 code and it shuts down after 1 minute. After reading the reviews, I agree Cabrio is a bad product. What happened to the trustworthy, best value Whirlpool name?

After 32 years of marriage and nothing but Whirlpool (because my mother swore by Whirlpool), that is all we have used. I am so disappointed in the Cabrio washer/dryer set we purchased at Lowes. After 18 months, the dryer just quit. The best part is, we hang clothes out most of the time. It was used one winter, $1400 wasted. We put a cheap Admiral in our second home and spent $500 total and they work fine. I will never ever purchase Whirlpool anything or recommend to anyone. Again, you lost a family tradition.

Bought all Whirlpool appliances for my home and the dishwasher doesnt work right and all that they can tell me is its not even 7 months old. They dont have any repair technician around where I live so Im on my own to get it fixed. So much for getting your moneys worth.

Purchased a Whirpool fridge 1 1/12 - after Sandy, used for about 1 month. Now ready to move home and was told ice maker bad?? Thank god we purchased warranty! I want to know why ice maker is bad regardless covered?

Never worked proper form the start, always condensation, bottom froze and top unthawed and vice versa. No help from store or company. During any temp change the fresh food would freeze and top unfreeze and no matter how long you waited and changed settings. Junk.

Purchased a Whirlpool WRF990SLAM fridge in 2013. Ice maker went out and the evaporator. Service tech said he needed permission from Whirlpool to work on. Would definitely not recommend purchasing this brand.

Sole owner/operator for 6 years using same products that came packed with dishwasher. Bottom rack has simply crumbled away, prong by prong at first and now large sections. Inferior quality of coating and metal used for the forms, means it wont withstand the daily use for which a dishwasher is intended. Worst quality control ever!!

I purchased the original Whirlpool water heater from Lowes in April 2008 for $372, and an installation charge of $443, grand total - $815. In February 2012 the tank leaked profusely, enough to ruin a section of hardwood floor in the room behind the garage where it was installed. Whirlpool provided me with return authorization, and Lowes provided me with a replacement water heater. So far so good. Since the original installation was done through Lowes, the replacement had to be as well, according to Whirlpool, but now they charged $500 with tax to install the replacement water heater! Grand total now is $1315. Fast forward to May, 2014 and the replacement water heater, just barely 2 years old, shuts off with a code of Bad gas control valve/thermostat. I call Whirlpool and an extremely rude 20-something staffer tells me the unit is out of warranty by one month! The replacement unit has no warranty at all - nada - only the original one does... Is this unbelievable or what?! BUT, they would be glad to send me the replacement of the defective part for $200 PLUS overnight shipping charges, and I would be responsible for all labor charges to install it. Had I opted for this my original $372 water heater would have wound up costing me in the neighborhood of $1800!! I told her in no uncertain terms what she could do with the repair part, and now I am going to go shopping for a water heater that will last me more than 2-4 years, and you can bet it wont be a Whirlpool, and it wont come from Lowes.

This machine (Cabrio) is a piece of junk. It does not fill up with enough water to cover the clothes, even on deep wash and your detergent will still be sitting on top at end of wash and clothes are not clean. It was a $900.00 machine. We need to file a class action law suit. Worthless waste of money. Anyone know of any remedies to get a new machine from Whirlpool or of any class action suits?

Its awful! We paid over $600 for our Whirlpool Gold Series convection/microwave clean release oven (model GMH 6185XVQ1). It worked fine for 12.5 months at which time it started clicking and, after a final zapping sound, would not heat anything at all. I called Customer Service, Oh, so sorry, its past its one year warranty. I was finally transferred to Escalations then to the supervisor of the Escalation specialist. Finally, we negotiated that I would pay for the service call ($129) and they would pay for parts (which were around $300 for a fried magnetron, diode, and something else). That repair was 6 months ago. Today while heating a glass of water in our microwave, I heard the familiar zap and no matter what, the microwave will not heat anything. I called Customer Service again, figuring the newer parts were still under warranty. Wrong. The newer parts were only covered for 90 days. This time, they tried to sell me a service plus package. For only $289, they will re-warranty my microwave for 1 year after they come out and fix it again (cost on me). My other option is to pay $129 again for another service call plus any parts (which Im sure will be about the same as last time. I will never buy Whirlpool again! Buyer beware!

I bought new townhome on 2018, in 6 months the top drawer broken, because stuck, after one year passed from the one year warranty start freezing all my groceries, milk, fruits. I turned off many times, not fixed. I am surprised paying so much money for appliances and turned out so cheap products and last only one year!? Older fridge last 10-15 years!! Companies ripping off people pockets. Very unhappy about this. Now services technician coming we have to pay for ....

DONT BUY WHIRLPOOL! I bought a Whirlpool refrigerator 5 years ago. In June I had to have a new thermostat put in because the refrigerator would not stay cold. The food in the freezer would defrost and then freeze, defrost and then freeze. I had to throw all of the food out. Two weeks ago the refrigerator was making a groaning noise so I looked in the freezer and the temperature was up to 30 degrees. The ice cream was soft, the bread and buns that I had in the freezer were defrosting and small things like crab cakes had also started to defrost. Eventually the temperature went back down to zero.So I called out the repairman AGAIN! He told me this is normal that the freezer goes up to 30 degrees to defrost the freezer and the groaning noise I heard had to do with the Freon. It cannot be normal for food to freeze, defrost and freeze again. I called their customer service and their representative, Jasmine, basically told me all she could do for me was to schedule a service call. Really? I just had the repairman out the day before. I am concerned about food safety with a refrigerator that fails to keep food at the proper temperature.

This morning another chunk of our Whirlpool Microwave handle fell off while I was cooking breakfast. I got on the internet after breakfast and typed in whirlpool microwaves to see if anyone else had experienced problems with their microwave handles and found this site. We purchased a Whirlpool Microwave oven from Lowes in 2011 (over the range model). About two weeks after it was installed, I noticed a crack in the handle. Then a few days after that, a small chunk of glass/plastic fell off of the handle when I shut the microwave door. Since that time, the door handle has been steadily disintegrating. Sometimes chunks of plastic fall off when one shuts the door, even if you are very gentle. Chunks of plastic fall off nearly every time I clean the microwave door, even if I dont touch the handle. Sometimes chunks fall off randomly when Im not even using the microwave. Pieces of plastic have fallen into my cooking pots a few times. Perhaps the steam from the cooking food loosens the cheap glue holding the handle on? What an inferior product! I am very dissatisfied with Whirlpool and will not recommend their products to anyone.

I purchased a Whirlpool Microwave on 9/21/10 from Hamilton-Bryan in Wichita Falls, Texas. I had a small fire in my microwave on 9/19/11, due to a faulty mica board. This was replaced by Mr. Bobs in Wichita Falls, TX, under the warranty. Then on 1/9/12, the microwave would not warm anything. I called Mr. Bobs again, and they said the transformer was out. I called Whirlpool, and was told by Yvonne that Whirlpool would replace the part only, with no labor, but Mr. Bobs was closed, and to call back in the morning, so this authorization could be set up with Mr. Bobs. I called back and there was no record of my call with Yvonne. I talked to a supervisor Rachel in Tennessee. She put me on hold for a while and finally said she found Yvonnes note to authorize the part. I explained to each person I talked to that I was dissatisfied with Whirlpool. I believe I have a defective microwave. I would like my money back, or a new microwave. I believe the defective mica board is related to the defective transformer. I am a very dissatisfied customer. I have used Whirlpool most of my adult life. I have used them since the 1970s. I currently have a Whirlpool refrigerator, washer, and dryer. A similar situation like this occurred when I bought a Samsung washer. I was dissatisfied, and Samsung refunded my money, and I bought a Whirlpool washer to replace Samsung. I will not be satisfied with this situation, until the microwave is replaced. Thank you for your concern and attention to this matter.

I purchased whirlpool Model# WFG540H0ES gas with convection. I purchased it because the price was $1000 dollars less than comparable ovens and even now the price has gone up $300 since I purchased it. I really wanted the luxe look at a discount price, a burner that you could lay a grill over, and five burners which it provided all of those things. I hesitated to buy this oven because the door fell off the last Whirlpool within three years and they refused to fix it so I tried not to buy this brand but it had the amenities I wanted for the price I could afford. I really like the oven. I like the oven the best because it really does make a great cake. I like the two large grates that sit across the oven. It makes it feel high end. If you dont wipe the range immediately grease gets stuck on the range and is hard to clean. This is what I like the least. Im ready to wipe on the weekend and its too late. It took me four days of internet comparison to decide on this one. The house is not painted, the cabinets are falling off the wall literally but I am extremely proud of this oven and it makes me feel affluent even though Im not.

My gas hot water heater failed. The pilot went out and could not be relit. The Whirlpool water heater has a 12 year warranty and we are in year 5. Sears said they could not send anyone to repair it because there was no service in our area. We live 30 minutes from Dallas/Ft. Worth, Texas. They offered to replace it even though I had a plumber on standby, ready to replace it. They said they could not let me do that if they had one in stock. After waiting a week for the delivery, they called at 4:45 pm to claim that the delivery truck would not start. They would not put it on another truck or help in any way. Then they said it would be another week before they could deliver it. All this time we are going without hot water, trying to cook, clean, take baths, do laundry etc. They had no sympathy and refused to provide compensation so I could proceed with installing a new water heater. I could have done this if I knew a check was in the mail but they refused to allow me to do this. This happened to me at another big box store years ago and they sent a check immediately. The customer support in the hot water heater dept at Sears was terrible. If they cant send someone to repair and they cant provide a replacement within a few days, it is only reasonable to offer payment so that the customer and move forward with repairs. I will never buy another appliance from Sears after this nightmare. On December 4th Im supposed to get the delayed hot water heater but if the truck doesnt start, who knows how long I will have to wait. I am reasonable and flexible but lack of hot water is something a customer should not have to wait two weeks to get resolved.

I bought my refrigerator model #WRV986FDEM, in October. It has not made ice in over a month. I think its very unfair to purchase a product and not be able to use it. The technician has been out here twice and the situation is still not resolved. I understand that customer service is not a strong suit of your company but I am not a customer to be taken lightly. I paid almost three thousand dollars for this piece of junk and I want it to work properly. I find it unacceptable that the technician just left and the situation is not resolved. I will be posting my displeasure on every site I can today since I had to take yet another day off to accommodate you and your inferior product. ALL I WANT IS ICE from a fridge I bought 4 months ago. In the words of our illustrious president. Very, Very BAD.

We will never, I repeat, never buy another Whirlpool, Kitchen Aid or Maytag (other than the Maytag dishwasher) product again. After just two years on the Cabrio washing machine, the bearing on the wash tub began to go out. As it was out of warranty, the cost to fix was greater than just buying a new machine. This was a known problem and Whirlpool failed to remedy the problem. Based on this experience, we went with an LG as a replacement. Before you buy anything, research it.

My Whirlpool refrigerator is more than a year old but have been complaining forever it seems. The serial # is 21142009, model WRT777REYWOO. All bottom cords etc. is out and 3 times I had people come out to fix and it never changed. The lettuce drawers freeze and in the freezer leaves ice cream pretty soft. I am so upset about this, and cannot afford a different one, no matter what brand because I paid around $1,000 for it and I am low income (my ss), 73, and disabled. But Whirlpool refrigerators are not worth buying if this is the standard policy to ignore their responsibility here. It leaks water from freezer to meat compartment, and I could go on but seems hopeless. My sister in Oregon had the same one and they took hers out finally so she could apply that amount to a different brand which has no problems.

The Whirlpool microwave has been very reliable and efficient. I like its multiple functions, from heating up leftovers to defrosting meat and poultry, baking potatoes. All the functions are easy to use.

Whirlpool washing machine has always been reliable for me. I have owned 2 and they lasted me many many years. Its easy to use, and cleans clothes perfectly. My family is also a fan of Whirlpool appliances.

Bought this machine in Feb 2007 as a pair Whirlpool Cabrio. I loved it for almost two years. The control board went out, Whirlpool replaced it. A couple of weeks later, the F-1 codes started then the F-51 codes. On July of 10, it was code after code. It sounded like a jet taking off and constant unbalanced load. I called repairman and was told to go buy new machine as repairs would start at $500 and since I live in a rural area, no one wanted to waste their time. Two repair techs told me point blank they wouldnt even touch it. We paid $1000 for this machine and we live pay check to pay check. I spent four months trying to get Whirlpool to do something. I kept getting told I should have bought extended warranty. Machine has been sitting under stairs for over year waiting to see if class action or recall can be done. Also when control board was replaced, the repair man told me it was rusting away from the inside out. My husband had to find us a used washer and this thing has done nothing but cost us money. So much for efficiency. Everyone posting here also needs to go to Whirlpools Facebook page and post there.

The new? improved model with NO center agitator is the worst - clothes tangle badly and the load becomes very unbalanced, wobbly and noisy. How I got talked into this model by a Sears salespeople was a big mistake!!!

Purchased this refrigerator, Model # WRS965CIAH on October 3, 2014. Paid extra for counter depth. Initially the refrigerator worked fine. After about 9 months we noticed the food in the back of the refrigerator especially on the top shelf started freezing. This started getting worse over the next 2 months. When I called Whirlpool 10/19/2015, 800-253-1301, I was told by their representative that this was normal, that air from the freezer blows into the refrigerator through vents and to just re-arrange my food so that it is not pushed to the back of the refrigerator. I asked him if this was normal why wasnt this happening in the first few months but only developed later? He had no answer. I asked him if it made sense if this was normal then everyone who buys this refrigerator has to make sure their food is not pushed to the back of the unit, then why dont they state that in the directions for use??? Ok everyone make sure every day you push all your food to the front of the unit so it doesnt freeze ridiculous. He just said thats the best thing to do. I asked him if I could talk to a technician, if maybe there was a way to fix it manually and he said there were no technicians there. I asked him if he knew about the lemon law and he said they dont have that there... ok. The refrigerator is just days after the 1 year purchase so he basically said just to call where I purchased it that Whirlpool could do nothing for me. Is this how Whirlpool trains their employees??? Good job Whirlpool, way to go. Luckily I purchased the extended warranty. Will see how the repair goes and report back. Did not call sooner due to health issues. Its not like the refrigerator is years old and started to break down - this is within a year. Whirlpool doesnt care about quality. Will never buy Whirlpool again and will spread the word as often as I can.

I replaced my 12 year old Whirlpool double ovens with the current Whirlpool double ovens. The new 30 built in double ovens have been re-designed to vent the heat below the lower oven. The ovens come with a part that pushes the heat down instead of straight out. My built in ovens have a cabinet drawer below and after using the ovens just 4 times over the holidays I noticed the heat is damaging the finish. According to Whirlpools service center I should have checked on that before buying/installing. They told me to stop using my ovens, that this is a fire hazard, but they are not responsible. They do not have a solution to this problem. This is a poor design on their part. There is a disclaimer in their installation booklet that came packed with the ovens that the installer gave me. It says the cabinets need to be able to withstand the heat of the ovens. The cabinets can handle the heat of the ovens, just not the hot air venting directly onto the cabinets below the oven. Where does one find cabinets that can withstand 400 degree heat being pushed directly onto them? As a customer I did not have that information until after the ovens were installed and it was too late to purchase another brand.

Fridge residue - ED5FVGXWS07: Well, I gave it a long time and this is how they make Whirlpool refrigerators! I had a GE for 20 years and was so looking forward to this new one. What idiot designs a fridge that leaves water stains like this? And, the water falls onto the floor when refilling a water bottle plus there is no catch for the water. Argh! I really dont want to live with this for 20 years! Their resolution was to get a water softener; really?! It has a filter built in. They refused to replace the fridge.

Called Whirlpool about fridge and they stated Too bad its out of warranty. The sides are getting pitted. It is a stainless with black sides. The condo is always air conditioned. It is two years old. Not very long to have a $1200 fridge look terrible. However, the fridge works fine.

We replaced older GE with the giant front load model that can do king size sheets and comforters. It has worked like a champ. It was a bit more but worth it for us. In a year and a half no issues no problems and I like the control lock feature so I dont keep hitting it off when I go thru the laundry room to the garage.

Bought a brand new 40 gal water heater from Lowes. Installed it and it worked fine. Next day no hot water... After doing all the tests with tech support. This smart mouthed CSR explained to me how her uncle is a master plumber and she knows what shes talking about. Still couldnt tell me what was causing it to not work. Other than the reset being tripped. I have had good luck with Whirlpool products. But customer service has always been poor.

We purchased the washer on April 25, 2015. It has been an absolute nightmare. Reached out to Sears within a week of delivery because the wash cycle was way over an hour. Is a terrible machine, my clothes come out dirty, is damaging my clothes and Sears says I cannot return it because according to them I havent had it fixed enough times. It washes for over an hour at times. It takes water and releases water and goes to wash again but is not cleaning the clothes. As a homeowner we pay water, and electricity and perhaps I wouldnt be so upset if my clothes would come out clean. At first the tech told me to change from the HE detergent purchased and recommended at Sears to liquid detergent and then since I still get stains on our clothes he advised me to use less than the recommended amount. I also purchased the kit to wash the machine. This is a real lemon and nobody wants to admit it. I have purchased Whirpool washer before but if they dont admit that this is poorly made and give me a voucher to buy another machine I will never ever in my life buy Whirlpool or Sears for that matter. The machine is just a year old and I cannot use it because it damages my clothes and worst, is not cleaning my clothes. It disgust me to wear dirty clothes or to have my family wear them. So now I have another appointment and at this point I no longer use the machine. I will tell everyone that is willing to hear my experience. Do not purchase this washer, is not good and is only trouble. You are not going to be able to get it exchanged or fixed. I think that a full year would have been enough time for Sears to determine this is a lemon and do the right thing by the customer. I now go to the laundromat because I have a machine that damages my clothes. I am also out of money to purchase a new one and the wearing dirty clothes disgust me.

Bought this washer 3 months ago. Absolutely hate it! Leaves white film on my clothes. Have to run all washes through a quick wash to get the film off. Hammers the water through the pipes, causing the fittings to come lose and leak! The spin cycle practically dries the clothes leaving them so wrinkled that I have to dry them longer to get the wrinkles out. Waste of my time and MONEY!

Bought a model wdt730pahz in Nov 2017. Up until recently it ran fine and we were very happy. Some folks have reported that the soap dispenser door gets stuck. Same here. In our case we found, when using those detergent pods, to make sure that they are pushed all the way into the dispenser before you close the lid, or the lid jams. Other than that, the dishwasher got the dishes nice and clean. However, after just two years of using it maybe 3 times a week (there are only 2 of us) the motor died. Youd think a new motor ought to survive at least 500 cycles. Anyway, parts and labor was quoted at nearly $400. Debating whether to fix or replace the dishwasher. Might try ordering a motor and pump and replacing it myself.

I have a kitchen collection of Whirlpool products, not even 2 1/2 years old. I have had nothing but issues. Microwave was completely rebuilt within few months, refrigerator and freezer multiple issues. Latest is the freezer stopped working, now my good is ruined!!! Wont always make ice in the icemaker. Already had to replace freezer door because it was warped and the seal didnt work and now my dishwasher isnt working!!! **!!! I waited 20 years for a new kitchen, finally got one and did extensive research thinking I was safe with whirlpool. I was wrong. So now what, what happens when the warranty runs out, Im screwed. Shame on you whirlpool for putting out crappy products and doing NOTHING to try and fix this!!

In addition to that I find the HE rating a joke as it takes 2+ hours to run a load of whites despite it saying on the read out that it will be 1 hour and 4 minutes, it literally tears up my clothes. I have now gone through 3 sets of sheets, 4 towels, 5 baby onesies... How can a washer that doesnt have an agitator cause holes and shredding in a garment? I honestly dont know what to do anymore. It takes two days to do the wash for 2 people when I could get it done in hours with my old machine. And to think I spent close to $900 on this washer makes me sick! I want to go back to my old agitator type washer from Maytag!

We bought our washer (Whirlpool Cabrio) from a rent to own company about 2 years ago, and finally got it paid off. About a week ago, the lid started sticking when it was done washing. I went to open it last night to start some laundry, and it BROKE. Now theres a piece stuck in the bottom part of the lock, and the washer wont start. Anyone else have this issue?

I bought the Cabrio Whirlpool washer and dryer thinking Whirlpool was the best! Wrong! Worst washer and dryer ever! Washer doesnt get clothes clean! Leaves white residue on dark clothes! Cant put over two blankets in large tub because it gets off balanced! It wont spin water out of delicate clothes done on quick cycle! Doesnt put enough water in to wash anything! Dryer wrinkles clothes so bad I have to iron! Paid $1,200 each! So noisy you cant stay in the house when you are washing! So disappointed I will never buy Whirlpool again!!!

We purchased a Whirlpool washing machine for $600 from a local retailer and it broke down within three months. It is now been two months and two repairman visits later and still not fixed. I called them and talked to customer service who then transferred me to another department. So far it’s just been the typical runaround with no results. I demanded an immediate replacement but was told that would need approval from yet another department. I don’t remember what departments are involved nor do I care. I am simply disgusted with this baloney.