I have purchased offloading washing machine in 13 Oct. Within three years it has given lot of problems. Every third month we have to call for service and spend lot of money. We had changed drain motor and condenser. Wiring is faulty. Machine will be down many times.

I bought new hot water heater. I installed it did and it did not work. I called them, and they sent a new part. A service man installed it, and it still did not work - he was unable to get it working. They said my gas supply line 1/2 od was too small. I had it replaced to 5/8 od 1/2id, and it still did not work. I called them again. They offered to send more parts and try again. This is a brand new water heater, never fired. I asked if they would give me a ra number so I could return it to the store. He would not give it to me. He insisted he send some one out to try to repair it. Meanwhile I have had no hot water for 2 days. He told me do what I have to do and hung up on me. So I removed the heater and took it back to Lowes, where they were glad to give my money back. But still, I lost a day of work and paid the gas yo bring it back. I went to home depot bought a GE hot water heater. I had it installed in about 15 minutes and it is working fine.

I purchased a Whirlpool dishwasher on March 13, 2007, along with a 3-year extended warranty. Well on Nov. 15, 2011, I had a part in the control panel go out, so they replaced it and they charged me $129.00 for labor and $29.18 for the part. My dishwasher is doing the same thing. It doesnt finish the cycle and I have to restart it, so I called the repairman A&E. They said the part is only guaranteed for 90 days. The part only lasted six months! Its the same part and the same problem. It should be considered a defective part. No matter how many you have replaced the part, it is going to need to be replaced and at $160.00, I cant afford it. They should have to pay for defective parts. Also on this model GU2600XTPSI on the panel buttons, the start button was made with this puffy plastic that has pulled apart and now it looks terrible! None of the other buttons were made this way. What a crappy workmanship, they should be embarrassed. This dishwasher was not cheap; it cost $650.00 plus $50.00 for the warranty. 4 years is too short of a time to have to replace any home appliance. There are appliance out there that are three times as old as mine and they are still working. I guess in the last 10 to 15 years, big companies dont care about their products or the people who buy them, just about their profits! I will never buy or recommend Whirlpool products.

My dishwasher is really a simple basic dishwasher. It is efficient and does a good job of cleaning. You can put many items in the top and bottom and the utensil basket can be moved for better cleaning or more room. If I had one complaint that would be that it is a bit too loud but other than that it is wonderful.

I purchased a (second) Whirlpool washer (WFW87HEDW0) in October 2014. Since purchasing (and to this day), I manually dried the rubber gasket after completing my daily washes, knowing that mold growth was possible. I wash one to two loads of clothes about three to four days per week. During the first year, I did not notice any mold in this area and was confident that the manual drying and cleaning with Affresh was preventing mold growth. However, at the beginning of this year I discovered a little mold growth, which has slowly been increasing, in the inside lower lip of the rubber gasket. The image attached reflects mold in its current state. I was very surprise to see this happening since my diligent cleaning has been thorough and never ending. I even remove the soap dispenser tray to clean and air dry it outside of the washer and leave the washer door open at the end of the daily washes for extra fresh air circulation. This is my first official complaint about a Whirlpool front loader washer, even though I previously owned another (GHW9200LQ0) before this one and had mold growing on the rubber door gasket but, unfortunately, never officially complained about that old machine. Now, I dont qualify for the $500 compensation because I never officially complained three times within the first five years of owning the old washer. To my dismay, I did not immediately realize I had mold growth in the old washer. It was only until years later that a repairman told me that I had mold growth in it. In addition to telling me the price of replacing the rubber part and replacing a broken water pump plus labor would cost as much as buying a new washer. Before purchasing a new washer, I researched and read many reviews about Whirlpool and other brands before deciding on this new Whirlpool. I decided to give Whirlpool another chance and to follow their recommendations on the proper cleaning of the machine. Once again, I am disappointed and angry with Whirlpool and, now, have to figure out what to do with my current situation.

We have front loaders. Far, far less damaging to the clothing than a top loader with agitator, would never go back to top loader. That comes with a caveat though. There is a difference you may not realize between the two styles. With a front loader comes a little maintenance. You will need to clean the washer periodically. Most all the stores sell the cleaning tablets and no, not all cleaners are created equal. I will only use Affresh after testing most of them. With a front loader there is always some water in the bottom of the drum, even after the cycle ends and even when it looks empty. So if you wash real dirty or smelly things, you’ll want to run an empty cycle to rinse out that leftover water or run with cleaner.In between wash days you’ll need to leave the door open so it doesn’t mold or mildew. The door gasket/seals will show mold and mildew and or you’ll get a mildew smell in your clothing. The only issues we’ve had with these units were the learning curve on front loaders in general and with the dryer we had the water valve for the steam function stick open (after 5 years) but it was due to calcium build up from our well water, not a issue with the machine itself.The dryer lint screen could be better. It is vertical so as the lint builds up during a cycle it drops to the bottom and accumulated at the bottom falling off as you pull it out each time to clean it. The lint catches on a crazy amount of extrusions inside the lint trap which also makes it nearly impossible to get down in and effectively clean all the crap out. One last thing if youre changing from top to front loaders. Buy the peristalsis, they’re expensive but it’s a pain in the butt to get stuff out if you don’t have them. Overall we’ve been very happy with our Whirlpool front loaders and would confidently recommend them to you.

I purchased this Whirlpool washing machine model# WTW4950XW2 and after 10 months of use, it broke down. The repairman fixed it (gear box) and said that the motors and the control boards went bad. I didnt get a weeks use out of it because the motor went bad. He came and fixed the motor and it didnt work once after that. I called Whirlpool up and they sent their serviceman out twice and they didnt do much but reprogram it and both times it didnt do one full cycle. Now they (Whirlpool) are going to put a new control board in and hope it works. Whirlpool wants me to get another years warranty on the machine & charge me $100 and not do anything about all the money I spent going to the laundromat (2 months worth) while this machine was not working. There should be a recall on this machine for replacement & reimbursement of all the time and money lost.

I have a new Duet Washer and it is a nightmare. It keeps throwing the same F8 E1 code. The repair people have replaced five parts and been out four times. I feel like I have been scammed out of $900. I will never purchase a Whirlpool again ever!

Our Whirlpool Cabrio Washer did a decent job for the 3.5 years that weve had it. Last week, it stopped spinning properly after rinsing, leaving the clothes quite wet. The repair person said it needs a new control panel and is not worth repairing. So, we have to buy a new one after such a short time. Very disappointing. Next time, well try another brand and buy an extended warranty this time. Buyer beware!

Whirlpool Cabrio - good consumer rating. Ive had it for 2 years. It does not clean well and the clothes does not smell clean even though I often clean the washer and leave the top open when Im not using it. Ive also had it service 3 times because the rotator keeps going off and makes a lot of noise. I bought an LG dishwasher for $1300 and it lasted 7 months and completely broke down less than a year and had to be replaced. After I bought a $400 Whirlpool. It does the same job and Ive had it for 2 years without any repairs.

Very similar experience with warranty issues as everyone else. I purchased a brand new $2k side by side stainless steel model in Dec of 2013. It began not cooling in August of 2014 and they have since had 8 repairs and still will not exchange the fridge/replace the fridge. We finally had to buy another fridge and put it in our garage in order to have food in our home (of 5 kids and 2 adults). Ridiculous customer service every phone call. Possibly the least educated, rudest individuals always. Never buy from Whirlpool - worst reputation ever.

We bought this Whirlpool he washer two months ago, and it is the most aggravatingly frustrating washer weve ever had the displeasure to use. There are times when it washes just fine, but I always have to put the mode on deep water wash because the normal mode uses very little water (like its supposed to) but it doesnt clean the clothes. However, most of the time it doesnt wash at all. All the lights will turn off and youll hear this sound and itll drain the water without having been in the wash cycle. Worthless piece of equipment! I prefer the old washer where I have more control. Whirlpool used to be such a good brand, What Is Happening? The new design for their washing machine nowadays generates a lot of complaints, and with good reason (because they suck).

I am a single parent. So I was very excited when I had saved enough to purchase a new washer and dryer. I purchased Whirlpool because I had been told that was a good brand. From the beginning, I was having issues with the washer (Whirlpool Front Loader model #WFW8300SW04). It wouldnt start or it would not spin, or it would just lock and not be able to get it open. I had purchased a warranty. So I called to have it serviced. The tech came and told me that I needed to have my floor leveled under the washer. I hired someone to concrete under my washer and dryer. Again the washer still did the same thing. I used the warranty again. The second tech told me that I needed to have my electrical outlet changed. I again hired someone to change the outlet. Yet still the machine didnt work. I then hired a tech to come out and was told the mother board needed to be replaced. Had that done. The machine worked for a short time with no issues. But yet again it wont start, or wont spin, or it locks and you cant get it opened. I contacted Whirlpool and their answer to the problem was they would be glad to set up an appointment to send out one of their techs (at my expense). I have hired another tech and being told that the mother board once again needs to be replaced. I am so disappointed with Whirlpool and their service. I dont understand why they won’t stand behind their products. I will (when able) purchase another washer, but it most definitely will NOT be Whirlpool. Anyone else having issues with the same model? Would like to hear.

Six warranty visits and the fridge still doesnt work. Cools to around 44 degrees in the upper part and lower part barely freezes. We have gotten sick from food left in the fridge after two days from the grocery store. It is now approaching two months without the use of our new refrigerator. DO NOT buy a Whirlpool. Apparently there was a manufacturing defect. We are now learning that a $2,400 fridge doesnt seem to be able to be fixed by factory-trained specialists.

No matter what I do after I wash clothes on quick or deep water cycle or even running the cycle over again, the clothes are left with soap residue. This is very annoying, particularly on dark clothing because it stands out. If I could start over, I would purchase a washer with an agitator. I watch the clothes as it goes through a cycle and the clothes stay in the same position...no wonder they dont get clean. What a ripoff!!

I’ve been struggling with this new washer since I bought it a year ago. It’s sold as a water saver machine, but it continually leaves white residue and lint on my dark clothes that will only come off if rewashed with no soap and no other clothes. The technician who came out ran a cleaner through the machine and that was it. It’s recommended that the cleaner be used once a month, but it doesn’t seem to do any good. Per the appliance dealer I’ve reduced the amount of detergent I use to a tablespoon. I still get the residue. Definitely not a water saver and a crummy washing machine. Don’t buy Whirlpool!

I bought a whirlpool washer because we thought it was the best. It does not clean our clothes especially my husbands jeans. They are on their third wash at this minute. I use Gain HE detergent. I bought clorox 2, I use spray & wash & I have even started using a little clorox but the red dirt still doesnt come out. I never had this problem with my old washer. If there is any help for me here please let me know. If this is supposed to be a water saver I dont see how I have saved any after washing jeans for the third time. If they are not clean this time, I guess he will wear them dirty.

Bought Whirlpool Gold refrigerator, microwave, and stove. The bottom where the freezer is located leaks if you dont slam the drawer shut - many times leaking regardless. The microwave needs to be unplugged/reset about once a month or so because the power dies - light comes on, food rotates, no heat. And the small stove light indicating the burner is on for the front left burner suddenly doesnt light up. 0 for 3 on satisfaction. Appliances are 2-3 years old. Did not get extended warranty. Everyone tries to get you to buy but didnt realize I was buying junk. Will not recommend or buy this brand again.

I shouldve read the reviews online about Whirlpool before buying our washer and dryer Duet. 4 years later the main bearing is going out and its 1200 to fix it. No support from them or anything. They did offer a loyalty discount on a new washer... No thanks. Just would be another headache a few years down the road Im sure. Goodbye Whirlpool. Never buying anything from them or their other brands. Ill definitely spread the word too.

My stove is great. The only thing I would change is one more big eye. Having two big eyes would really help. I also love the oven although I have to pay attention because it heats on the hot side. A cake will be done in 18 min instead of 20 or 25.

My Whirlpool Cabrio washer (WTW6600SG2) is a money pit! After reading all of the nightmare stories concerning this washer one would think Whirlpool would offer a recall and try to correct their wrong doing. Do not buy a Whirlpool Cabrio. It was the worst decision I have ever made! Whirlpool does not stand behind their products. I cant believe they can get away with treating their customers so unfairly, taking their hard earned money for crap like this, then not offering to help after so many have had issues. The Cabrio is loud, doesnt get clothes clean, and is always flashing UL for uneven load (when it works at all). My local repairman has made many trips to fix my problem Cabrio. This time he is at a loss. Ill be buying a new washer and it will not be made by Whirlpool! Please, if you are reading this be forewarned!! You will regret your purchase if you buy a Whirlpool Cabrio.

We bought Whirlpool Gold Series on July 6, 2014. Refrigerator, range, microwave & dishwasher. Our refrigerator - we have the repair company out almost every month cause the icemaker was constantly icing up and wasnt making the ice cubes single, would come out all attached to each other. So after arguing with Lowes and Whirlpool we were able to get a different refrigerator in February of 2015. Now in April 2015 we are having trouble with our microwave with the light flickering off and on when we open the door and sometimes it work and sometimes it doesnt. The repair company has been out 3 times for the same problem telling me that where the door closes are 2 latches that when not lined up cause this issue, so the repair company replaced the 2 latches and a month later it started happening again. So they came out and replaced the light socket. Now we will see how long that last.Now for the range which is the AquaLift Self-Cleaning which doesnt clean the oven at all. It was like I was back in the early 1950s, only worse. The baked on grease spots, you cannot get off at all. To me this is false advertising and the stores personnel lied to about all you have to do is pour 2 cups of water in the bottom of the oven, press the self-cleaning button and after 40 minutes of cleaning and letting the oven cool a bit you just have to wipe the oven down with a damp cloth and the oven is clean. Not so much!!!Wish I had all my old appliances back because they were made to work correctly. The new appliances suck for the amount of money you pay for them. So please beware and do research on the appliances you want to purchases otherwise you will get ripped off with no satisfaction for your hard earned money you spent on them. I have always had Whirlpool appliances and have loved them but these new ones we purchased are nothing but junk.

Whoever came up with the idea of this AquaLift oven cleaning method should be fired! This method does not work. Ive barely used my oven but had some cheese pizza drip on it so thought I should clean before using again. What a JOB! The spill did not come off the bottom entirely and using the non-scratch scrubbing sponge was a joke. There is some soil on the sides and back of the oven that I will have to use elbow grease to get off and Im going to have to crawl into the oven to see if they can be remove. Welcome back to the old days before self-cleaning ovens!

Just like many other reviews about this brand - our microwave went bad after only 14 months of using it. Initially the door sensor would register - it wont operate even if the door is closed. Or it will keep going even if the door is open. I contacted BBB and the Whirlpool corporation regarding this safety issue. I pointed out that the safety mechanism is faulty and they should recall all of those models that have similar issue with door sensor. This is extremely dangerous for households with kids. There is a reason why this safety mechanism is mandatory in all microwaves! Whirlpool pointed out to me that I should not try to operate microwave with open door and refused to take any responsibility. Ive owned probably 10 different microwaves over the years and NEVER had micro go bad after only one year, yet alone have completely faulty safety mechanism. Consumer beware!

Its a front loader and has lots of cycles and temperature to choose from. Its setting on a pedestal so its not too low. I dont like the way the soap is dispensed.. If you still have the door open when you pour it in the dispenser it almost comes out on you. It also knots your clothes up and makes them hard to get out. The rest is good.

We bought a new Whirlpool Dishwasher. Installed it, wife used it for two loads. The third time she tried using it the door sprung and it no longer latches. After two weeks of calling Whirlpool, we finally had someone come out to fix it. After the repairman took a hammer to the frame he stated that it had been dropped. He wobbled the dishwasher back and forth with his hand. He said the frame will never be correctable and we will always have problems. After another week we got a hold of Whirlpool and were told the repairman has ordered parts to repair the dishwasher. Whirlpool is hoping it will hang together until the warranty expires. If the dishwasher were fixable that would be fine. However, when the repairman who has years of experience in his job tells me it will never be right and will always be a problem, I believe him.

This washing machine is terrible. It barely cleans my clothes and frequently gets off balance. I am now on my second repair call in less than 3 years. (I bought the unit in the summer of 2013. It is now the winter of 2016.) The last repair guy tried to blame me, suggesting that I was filling it too much and with heavy materials. Last night, I washed 5 or 6 doggie towels. Not even large, bath sized towels. And the whole thing just stopped. It wont spin and wont unlock. What a piece of crap.

The washer has rust under the rim in the inside - also the paint is bubbling and peeling under the rim of the washer. I contacted Whirlpool and was told that is a cosmetic problem. There is no warranty for rust or peeling paint. I will never buy another Whirlpool washer. I paid over $700.00 for this washer and I dont think I should have a rust problem after 5 years.

I purchased this WRX988SIBM01 refrigerator new at Lowes 23 months ago. The freezer evaporator failed with estimated repair costs of $600 on a unit that cost $2400. The authorized repair person indicated that the failed part was a recalled item on the three door models. Mine is the four door model but has the same evap model. When contacting Whirlpool about covering some of this cost, they denied the issue and offered no assistance. This was after hours spent trying to get through. They do not return phone calls. I will never purchased another Whirlpool or related company product again. The quality is subpar and I hope my post prevents others from buying their shoddy products. Made in America doesnt mean what it used to.

I have a 4.5year old Cabrio washer. Ive replaced the water pump 3 times due to a weak plastic part which keeps blowing out due to pressure. Now, the unit is leaking rusty, black fluid from the bottom. I purchased it at HH Gregg in Indianapolis, In. Svs tech called. They have never seen this on such a new unit. Parts and labor will equal $400.00. Calling whirlpool customer care did nothing. I offered to pay the labor of $100, If they would be willing to pay for parts. Talked to a supervisor who offered to sell me an extended warranty costing $300.00. I am a stock owner in Whirlpool, no joy, dissatisfied with faulty product. They are unwilling to make this situation right. The unit is poorly made. I think a $800 unit should last longer than 4-5 years. In 2006, Whirlpool stopped offering a 5 year normal warranty on their units. Supervisor would not let me talk to anyone else.

We purchased a new home 6 weeks ago that was furnished with new Whirlpool appliances. The stove worked great however the oven never worked at any time. The appliance sales person advised that we had to go through Whirlpool for repair on a brand new appliance. To date we have had to stay home 2 days and the range is still not working and third service call is now scheduled. A call to Whirlpool ended with them advising that we do not qualify for a replacement range, even though it never worked. We have been without an oven for 6 weeks now which is totally unacceptable. I would never buy another Whirlpool product or recommend them based on this current experience. We paid for a new product that never worked and they will not replace it. Hopefully they can repair it on the third visit. Unfortunately I have lost faith in this product and this company.

I purchased a Whirlpool front loader as well as an extended warranty. The machine worked well for about a year and a half until i noticed rust patches beginning to form on the front of the machine. We contacted the retailer that we purchased it from and they suggested that we call the people that we had bought the warranty from. Unfortunately, the warranty does not cover rust, so we have to wait for it to rust out and just buy another one. It is only 2 and a half years old and is totally rusted across the front of the machine! It is extremely unsightly. This is the second Whirlpool washer that we have bought and the second one to rust out on us. I would never buy another Whirlpool appliance, and extended warranties are not worth the paper they are written on, let alone the amount that you pay for them!

Rust started forming early on our washer and spread quickly. Our house is air conditioned and not near the ocean. There was no reason for the rust. Poor quality finishing is the only explanation. When I called to complain I got nowhere. I wish I could show a photo on this website. It would dissuade anyone from ever buying a whirlpool.

I just bought a brand new Sterling steel refrigerator not even 2 months ago, and since I got it, noticed rusty spots coming out,and now has spread all over. I called customer care, and they said it wasnt cover under the guarantee,and to buy a special spray out of my pocket expensive to remove the rust. I am Very disappointed with the service I received, for its not even 2 months old refrigerator and it looks like it is old now. In addition, the company didnt offer to send someone to take a look, checking and make sure theres no future problems with my new purchase, and as a courtesy removing the rust free of charge.

Ice maker stopped making ice. This side by side Whirlpool refrigerator was purchased 4 years ago. We called Whirlpool. An authorized repair man identified the problem. At the bottom hinge of the freezer door two of the wires have been broken. A defective design, but no recall from Whirlpool. The solution is to replace the entire freezer door for a cost of $1200. Ridiculous that a replacement door cost more than the purchase price from Lowes. It would appear that these 2 wires could be reconnected, but Whirlpools only solution is an entire new door. Automakers stand behind their products with recalls, but its not the same with Whirlpool. Love my Whirlpool range, washer and dryer, but this counter depth side by side is a real loser.

I have just had one of the worst experiences with any appliance warranty repair service of my life. I rarely complain but strongly feel the company needs to make some changes. They have no repair folks less than 50 miles away from the dealer (and my home). Their refrigerator was sold to me with the understanding that such a service was available as part of the purchase price. Ha! The repairman referred wiggled out of the time assigned to him. Another repair referral will take weeks. The unit is a piece of junk and is malfunctioning in less than a year. When, and if, any repair person comes to my home they will find it in the garage with the rest of my junk.

We purchased the model WFC7500VW, 24” washer and accompanying dryer in June of 2015. Within a couple of months, the water pump went; also we continually had to take the front panel off and clean out the filter when we get an A11 code! Now we experienced an F06 code... This code means the washer can’t go into high speed. The repairman (Whirlpool recommended), told us that a new tachometer motor, etc would run $500-$800 with labor! He also said that the noise the drum made was bad. My dryer works fine (only complaint is the grinding noise it makes, which Whirlpool told me is normal)... I would like to purchase a new washer, but don’t know what will fit under the dryer. I do not want ANY Whirlpool product!

My Whirlpool Gold Star aqualift oven stopped working right at three years, when the warranty ended. I paid the $650 for repairs to the stovetop, hoping this was a one-time situation. Six months later, my oven has quit. This product is not a good investment. Im very disappointed.

Cabrio WTW8200YWO - We purchased this washer five years ago. About a year ago it started getting noisier and noisier on spin cycle. Now it sounds like a jumbo jet taking off. A Google search quickly revealed this is a ubiquitous problem with these washers. As we are in our 70s and dont have kids at home, we are very light users of the washer. First, I would suggest that no one buy this washer. Second, I suggest that Whirlpool should recall these washers. I called Whirlpool and it turns out they clearly know about this issue. The good news is they will offer you a discount on repairs or even on a new machine. The bad news is it will still cost you several hundred dollars to fix their design defect. I suggest that you avoid purchasing Whirlpool products both because of their defective design and because of Whirlpools unwillingness to take responsibility for these problems.

I bought my new Whirlpool Duet washer in April 2011 and the gas steam dryer in May 2011. In October 2011, the washer started to make a loud banging noise when starting the spin cycle. I contacted Whirlpool, and they scheduled a service call and stated that the washer was out of service. I told them it was and that I just bought it in April 2011. They said that the repair guy would need to see the receipt. Well, the A&E Factory service guy came out and said it was the bearings. Whirlpool only replaced the bearings with the whole tube unit and a few other parts. I was never told that all these parts would be mailed to my home, until I got a call from A&E about the tube being on back order. I was told that the part wouldnt be in until November 21, 2011, and it would take another week or more to schedule for a repair guy to come out. I called Whirlpool Executive Office (269-923-5000) and complained about all this. They said thats how it works--they ship everything to the customer and that there was nothing she could do about the back-ordered part. So I called Lowes corporate office and told them what was going on and asked if they could push Whirlpool into fixing my washer faster. About 4 1/2 hours later, I got a call from the assistant store manager; and they said that they would replace my washer with a brand-new one and would have it delivered in 2 days. Now, that was going above and beyond what I thought they would do. Just another reason why Ill continue to be a Lowes customer.Now, here it is, April 2012; and my dryer is leaking water into the drum. On Saturday, I went online and scheduled a service repair for Wednesday, April 25. Today, the 24th, I got a call from VIA that they would be out tomorrow and that I would owe them $120.00 for the service call as my dryer was out of warranty. Here we go once again, having to battle Whirlpool! I really dont give a dang what their dang system tells them about when I bought their product! I know when I bought it. And why did they keep telling me that Im wrong? They did almost to the point of calling me a liar!I called the Executive Office again and had to leave a message. Mark my words, I will never ever buy another Whirlpool product again! I will make sure that I tell everyone who I know at work and at home about the way Whirlpool handles their good customers!

I purchased a range and refrigerator from Whirlpool and have had nothing but problems with them ever since. Ive only had the range for years and (2) of the top burners are no longer working. Again, the refrigerator is only 5 years old and its handle has broken 5 times. I have needed to replace the handle every year that Ive owned the refrigerator. Whirlpool only offered a (1) years warranty for these faulty appliances and then immediately started to bug me about purchasing an extended warranty. I guess they knew that their junk would hold up, so they started pushing a warranty. Finally, their customer service while apologetic, are very robotic and appeared to have heard my complaint before. So, SAVE YOURSELF SOME AGGRAVATION AND PURCHASE ANOTHER BRAND. For if you dont heed my warning just know that youve been warned.

The stove started having problems about 5 months after I bought it new, it had a 1 year warranty on it so the first repair was covered but it begun to have the same problem a few months after the repair. By the time I contacted the company they told me the warranty was expired and ask if I wanted to buy another year of coverage for $300, of course I said no. I repaired it myself and once again it worked for a few months and now the problem came back. Will not heat up so dont waste your money.

I bought the Whirlpool French 4 door fridge WRX988SIBM 01. I like the way it stores and layout (other than the icemaker taking the entire left door out). But I got a lemon, I bought the Lowes 5 year warranty (with the 4 repairs replacement). The fourth repair and dead declaration was 5 years and a week (so just out of Lowes extended warranty by a week). The Death Certificate repair guy said they dont make em like they used to. So I am now buying another fridge - trying Samsung this time. Every fridge has a lemon once in awhile and with my luck... Well you can thank me for taking it off your hands! :) I am averaging 5 years per fridge. Thats a lot of money and I expect to get at least 10 years life on a major appliance.

We purchased a stackable electric washer/dryer unit and received in October. Had issues from the start. Called Whirlpool in Dec 2018 and they sent out their contracted service company. Told us they were ordering parts. Never heard from anyone. Called service contractor and they said never received parts. Called January. WP told us that because it was a new model, they didnt have the parts. We asked them to replace the unit. WP called us and said they would replace the unit and it would arrive in late January. NO CALL. Called 2/22 and said, no similar units available. Ask them to upgrade me if there were units available. Said they would and the inventory of the upgraded unit was promising. Would get a call from delivery company for a 3/6 delivery and install. 3/2: Called because hadnt heard from anyone and called WP. Today Katrina ID # ** tells me they are making the new upgraded unit with an anticipated delivery of MID MARCH. I just about flipped my lid. I asked for a supervisor of which she said she was a SR support specialist. I asked that this be escalated and I get a call regarding status. She advised that she would inquire and call me back. Likely shouldnt hold my breath or try to call back because you are on hold for up to 1-2 hours. Just to clarify, have never had an issue with Whirlpool. Every appliance we have in our home is Whirlpool. I just cant believe this experience. I am going to the media on my next stop.

We too have nothing but problems with our supposedly top of the line convection/microwave oven. Purchased in 2010 in February for new kitchen. From start, original microwave installed did not work, would not cook or heat. Dealer replaced. One year later, same problem, but now out of warranty. Had to pay labor, costs, and parts to get fixed. Fast forward 13 months, again magnetron needs replaced, microwave will not work. What a hunk of junk for our money. I will never buy any Whirlpool appliances again, and I will tell everyone I know the same. When you call customer service, they are nice but only say “too bad, out of warranty”. What a joke for a major appliance company to tell customers. It is obvious that this microwave is faulty from the get go, and they just keep on making them the same way and not trying to fix the problem.

I was so excited when I bought this stove. It broke right outside the warranty. It shuts off in the middle of baking or just doesnt stay on at all. Bad, bad, bad. They told me it would cost $400 just for the part, not including installation. What a rip off. I called the tech and he said this is a known problem. He advised me to just toss it and buy Hotpoint which has a much better consumer report rating. Sad.

I purchased a refrigerator from this company Model #WRF989DAM. It worked for only 14 months. I had service people come 4 times to try and fix it, called customer service and was suppose to get a replacement, paid $300.00 for a different model, been 49 days and still have no refrigerator in my home. Had to go out and buy my own replacement. I have called and sent emails with no response of when I would be getting the replacement.

We have been very happy with our appliances that now over 11 years old and doing well. We love our gas range top. They gave greater and new models so we love Whirlpool and GE. We always get great deals at Home Depot.

Very concerned. First the microwave broke. It seems that is burning on the inside. The model number is MH1150XMS-2, purchased in 2005. I have had to replace the plate. I have read of many recalls, because of the potential of fire. My model was not among the ones on the recall list.

We purchased our suite of appliances from Home Depot, this was a great experience. Unfortunately that is were it stopped. Our 1st refrigerator caught on fire in the electrical within the unit. We got a 2nd refrigerator sent to us and it came damaged. Then they sent us a 3rd refrigerator and it caught on fire in the electrical as well. Weve been dealing with this all since August 27th 2019 and here its now October 14th 2019. At this point I feel this model of Whirlpool is truly unsafe.

Model CAE2745FQ0, Serial #C72680766 - Purchased this coin op clothes washer 2/2/2018 at Brandsmart, Deerfield Beach FL. Would not empty or spin correctly; 1st service call 2/28/2018. (Less than 30 days from purchase date). 3/21/2018 called Whirlpool again as same problem continues (as listed above). Washer is not being overloaded. Whirlpool repair visit scheduled again for 3/23/2018. This is the 2nd repair time since we purchased the washer on 2/28/2018. Purchased the same model 2 years ago, and experienced repeated problems to the point where we got rid of that machine and purchased the most current model referenced here. We are looking for a full refund of the purchase price as it appears that this recently purchased machine is on its way to be a repeat performance of the 1st machine that we got rid of (that was purchased 2 years ago). Again, we want the full purchase price refunded, which is $900.88. This machine is not even 2 months old. Thank you.

My refrigerator will be 3 years old in September. It stopped working two months after my warranty ended, in November Thanksgiving Day. I was so thankful that I had snow on my deck to keep everything cold. I had several family members in my house and watching my husband defrost a frost-free frig? This was a nightmare. Then a few weeks later, my husband company refrigerators did the same thing: freeze up and stop working. He defrosted theirs as well.I know that lots of consumers have had the same issue with any of the bottom freezer refrigerator doing the same thing. I think we, consumers, should make these company recall these lemons. Why should we have to pay more and buy more our parents had their appliances last for years. He had done this approximately 3 times since my warranty ended in September of last year. The problem is the food goes bad, the freezer ices up, causing the refrigerator to ice up and stop the air flow.I contacted the company and this is what they told me: I had to pay $295.12 to get the repair completed. It was the DEF control board. I guess others have the compressor go out and that cost over $600 to fix. Why is it our fault as a consumer buying their products promised and concern for 1 year, not 10 years. It is no wonder why America is broke? My question to the Whirlpool was, how on earth can this be the consumers fault? Here is their reply:According to the model and serial number provided, we do not indicate that there are any known recalls with this particular model. A recall requires that a product poses a threat to a persons life or health. Since this is not the case in this instance, we do not have a recall. Once a product warranty has expired, any costs for maintenance, service, or component replacements are then within the owners time frame of responsibility. Taking this into consideration, I regret to inform you that due to the age of the product, we will be unable to assist with the cost of the repair. If you have purchased an extended warranty, we would recommend contacting your extended warranty provider directly to discuss the options they provide.Oh, they sent me a postcard asking if the repair service I received was good... Yes, the company who came out did a fantastic job. I think I may have to call them back; it is acting up again. I have 90 day warranty....

We purchased a Whirlpool hot water heater approximately 4-5 years ago and have had problems with the pilot staying lit. I contacted Whirlpool and their trouble shooting included doing a draft test (I am a teacher not a plumber) and removing the closet door that houses the unit. I am very frustrated by this entire ordeal and would like if they would replace the entire unit. At this point I dont want another Whirlpool product. The plumber made a service call at 12 noon and by 3:30 we had luke warm water and by 6:00 pm the water was ice cold! I will never recommend any Whirlpool products.

My dryer has to run twice to completely dry my clothes. I had it serviced still a problem. My washer has had some issues but repaired and working fine. I will never buy this name brand again. Not sure what I will buy next.

I had my entire kitchen re-modeled in May of 2013 and purchase all new Whirlpool appliances. I work for Standard Pacific Homes and purchase the identical appliances we provide in our homes. I am so disappointed in the refrigerator. Two months ago it stopped making ice and I was told to replace the filter and it would be OK. I did that and still no ice. I bought ice trays. A couple of days ago, I came home to find water on my kitchen floor coming from under the refrigerator. I called Whirlpool again and no real help.... Told me to call Lowes. I called Lowes and they gave me 3 more numbers to call for service. None of those service providers had any available appointments and told me to call Whirlpool. Meanwhile my refrigerator is standing in the middle of my kitchen so I can keep the water mopped up. The refrigerator was so difficult to move. Getting the feet moved up so the wheels could touch the floor took an hour and I ended up with bruised hands. My lesson in this is to buy a better brand next time and go top of the line. I sell these to our buyers at Standard Pacific Homes everyday..... Wish I could believe in the product.

I purchased my water heater at Lowes and had it installed professionally. I suspected something was not quite right on numerous occasions because the hot water recovery time seemed excessive. I finally called Whirlpool and they gave me the names and numbers of two companies that were on their list. The first asked for the model number and normal information and never called back. The second showed up spent five minutes charged me 78 dollars and said they could not get the part (gas valve) I needed. And if I could get it from Whirlpool they would charge me 250 to put it on. They also said Whirlpool made horrible water heaters and I should save myself the trouble and just replace it. I have since heard from additional plumbers and the gas company to stay away from Whirlpool. I did have the water heater replaced. When they did it and they drained the old water heater it had so much sludge in it draining it was very difficult. The sludge is mystery since I have a softener in my home and it should have prevented that. The individual from that gas company said that was just one of the many issue others had experienced with these heaters.

I have a Whirlpool Gas Water Heater, product #0733136, that was installed in 2010. The pilot has repeatedly gone out and had to be re-lit. After reading some of the comments, I am amazed that other people were told to verify gas supply with the gas company (done) and clean the air intake (done) and then to call customer service and be told to do the intake cleaning again (done professionally six days ago). I will never buy another Whirlpool appliance, and fortunately, I am in property management and can advise others to avoid this company as well. I am extremely disappointed in Lowes for not doing a better job of providing reliable choices for their customers especially after these many complaints over the years. I have decided to replace the water heater with another brand immediately.

This ref model # wrf736Sdam13 is less than 6 months old. The doors have never lined up. At the top is a 3/4 gap and it is 1/4 at the bottom. This is a side by side. Sometimes the left door will open on its own. If you stand to the side and look across the front, the left door sets out about 1/2. My wife and I have contacted whirlpool many times and they will not do anything. I am ready to get another ref and get what I can for this piece of JUNK. We built a new home and purchased all whirlpool appliances and do not like any of them. Will never buy whirlpool again. Very dissatisfied with all – RANGE, DISHWASHER AND THE VENT HOOD. PS, the vent hood sounds like it is crushing ice when you cut it on. Very, very DISSATISFIED with all of them.

The plastic holding the vegetable drawers broke and now they are cracking because nothing is there to hold them in place. This fridge has a freezer on the bottom, which I like. Unfortunately, I had an Amana before this and it was wonderful- just old. I had to settle for a smaller refrigerator and that is part of the problem.

Bought a Whirlpool Gold model GI6SARXXF04 less than two years ago and have already had three problems. The first was a faulty main water inlet hose that dumped water all over the kitchen floor. It was still under warranty so I didnt have to pay for it. Now have two additional problems. About two months ago there was a puddle of water under the refrigerator every few days. I finally figured out it was ice build up in the bottom freezer chest that melted that caused the water leak. The second issue is that the ice maker just stopped working. It had been working great this whole time and then suddenly it just stopped making ice. I contacted Whirlpool and they will cover the repair for the defrost issue but not for the ice maker. Gee, thanks, way to backup your product. Im guessing the reason they dont backup the ice maker is that its probably the more expensive repair. Like many people here I also will never buy another Whirlpool product again, regardless of what it is. Theyve shown me that not only do they produce inferior products, they also arent interested in customer satisfaction.

I purchased a Whirlpool washer 7 months ago, and a month ago, it broke. I have been without my washer for 1 month, and it has been repaired 4 times in that month. It is still not working. All I get is that, its under warranty, and there isnt anything they can do, but to keep trying to fix it. I have been having to take my clothes to a laundromat, and pay to have them washed. I have asked for them to deem it defective, but they refuse.

Purchased a Whirlpool double oven (WGE745COFH) in September 2018. It is now May 2019. After 5 service technicians verified the erratic temperature fluctuations in the ovens, Whirlpool insists that a +25 degree to -25 degree fluctuation in a heating cycle is normal. The motherboard was changed 3 times, and the sensors were changed 3 times, including hard-wiring the last set of sensors. I called Whirlpool and customer service says that is normal. Ever tried baking at a 350 degree setting that fluctuates from 375 degrees down to 312 degrees while trying to maintain a 350 degree setting? I understand there has to be some fluctuation, but either it took a lot of extra time or burned my food consistently. Ridiculous.So, with the help of wonderful people at Lowes (where I purchased the double oven) Whirlpool is refunding my money and Lowes has taken back the slide-in double oven. In my quest to replace it, multiple appliance sellers have told me that all the new ovens having motherboards and sensors have big fluctuations in the oven heating cycles. I find that unacceptable. My husband and other family members have worked daily in an industry where temperatures were critical. They used ovens that could maintain temperature within 5 degrees of set temperature with analog controls. The home consumers are being ripped off with cheap, sub-standard parts making throw away appliances and getting away with it. What do I buy? Havent figured that out yet, but have purchased a countertop toaster oven that bakes beautifully.

Purchased a Whirlpool Dishwasher in 2017 as part of a kitchen remodel. I have always had General Electric appliances, and shouldve never changed my brand. I had to have this dishwasher fixed a month after purchase (this shouldve been a clue that this was a lemon). Fast forward to two years, I know have to turn the power off to the dishwasher after 3 uses otherwise it stops running mid cycle and the re-set lights blinks. Ive had a repair person take the thing apart to try and find the problem (at the cost of $250) with no luck. The repair person contacted Whirlpool to see if they could help troubleshoot, the response he received was because it was no longer under warranty they wouldnt even answer his questions, hows that for customer service????

I am a fan of Whirlpool and I think the issues I have with this Duet machine is more because of the style but who knows. This is a front loader with lower water usage. It would have never gotten my sons sports uniforms clean. Never. The gasket around the front loading window frequently clogs so water doesnt drain. And perhaps worse, the drawer where detergent goes stays wet so it had gotten moldy and I didnt realize it. Now I remove the drawer after every wash so it can dry and I leave the loading door open as well. That just seems like a major design flaw and health issue.

We purchased a Whirlpool fridge from Future Shop four years ago. It was delivered by professional movers and we plugged it in and smoke filled the house. We called Future Shop and very soon, another fridge arrived on the back of a pickup truck (no box or papers, etc.). This fridge is slowly ruining our kitchen floor as from time to time, we notice a puddle of water leaking from under the fridge. We called the store a few times but were told its normal for a fridge to do that in hot weather.

It seems the quality issue of the LED of the washer Whirlpool Cabrio. It was broken from the screw part of the glass and the plastic/alloy and the glass. They would charge me $416 to replace the LED but I rejected and was still required to pay $85 for labor fee. I called the company and they didnt admit that was a quality issue but I just found many consumers had the same problem. If someone would like to have a lawsuit, please contact me and I will join.

Got the dreaded 4 flashes LED status - High Temperature Shutdown. Online and vendor documentation says that this condition requires gas valve unit replacement, a $115 option. If your Pilot remains burning, but main burner does not kick in, then a good guess is the circuit board requires a reset. Prior to any further work, test the Thermopile, that is the round item with two blades located below and to the right of the gas valve unit. Move knob on control panel to OFF1) Pull out plug with red and white wires located on front of gas control. 2) Have someone Hold in the control knob on the unit at Pilot, and make sure Pilot flame is burning. 3) Using a multi-meter, set it to millivolt reading, and test voltage across the two wires. Voltage should be greater than 350mV, preferably >500mV. 4) If you get a reading in that range, your Thermopile is good. Turn knob to off position. Do NOT uncouple gas lines. 5) Piezo Igniter wire comes apart, disconnect it. 6) Remove screw that holds front cover. (screw located bottom left as you look at the unit) 7)Cover simply pulls off directly towards you. 8)Remove the screw holding the circuit board to the cover, and remove circuit board by unclipping it - 3 clips, one either side and one at bottom. 9) Unplug the 3 strand thermostat cable, you should now have the circuit board clear. 10) Take a piece of aluminum foil, fold it twice, then lay circuit board on it facing up, do it on top of tank, want it grounded. 11)Using one of the multimeter probes, wrap a piece of foil around it, keeping point free, and ground it too. Then slowly work around the board, touching all the solder connections you see, as well as the chip legs. Pay particular attention to the round objects on the board (capacitors), make sure to ground out each of the solder points, visible either side. (takes about 5- 8 minutes, take your time) 12) Once done, reconnect thermostat cable to board, then reinstall board into cover (dont forget the screw)13) Place cover back into place, screw in cover screw, reattach Piezo wire and black electrical plug with thermopile wires. 14) set Knob to Pilot, get pilot lit (may take a few hits on the Piezo button) and while still holding the knob in, watch to see what LED flashes you get (there will be a 10 second time lapse before it will start to flash) 15) You should either get 1 flash or 7 flashes, that means the board is reset, now turn knob to warm, and see if main burner kicks in. Good luck, and for a half hours work you have saved yourself $$$. PS: If it occurs again, you have sediment build up, need to drain the tank.

We our adding our name to a list that is remarkably long. We purchased a top loading Cabrio washing machine just over a year ago and the problems with the balancing of the unit are the same as everyone else who has written in. The service company A&E has promised a lot but has done little to resolve the issues we have had with the machine. One representative told us that she would order the part and have it sent to our home. When the part did not arrive, we called A&E back only to find out it was never ordered because the service technician would not return their phone calls. I find this excuse ridiculous and similar to other false statements they have given us on the other four phone calls made to address the problem. After reading these reviews, we realize that this is only the beginning of what will be a frustrating and costly experience. Never again will we buy a Whirlpool!

First one had major problems. The bladder they call it. They took out the whole system out, replaced the tube that goes to the top of the refrigerator which is where it always starts leaking so they worked on it three times, junked it, gave me a new one and here I am again same thing. Ruined my hardwood floor and Im stuck with it. Never again will I buy WHIRLPOOL.

Overall, I am happy with my Cabrio BUT we purchased a Whirlpool WTW7000DW0 Cabrio top loading washer w/ electronic touch panel in May 2016. We experienced water hammer from day one. I finally had enough yesterday and knowing that the plumbing could be suffering (15 year old condo), purchased 2 Sioux Chief MiniRester, Model 660-H arresters (Lowes at $9.99 each) and had a plumber install them today. I could have but am nursing a fractured rib. Long story short, they work perfectly. There is NO indication elsewhere in the unit that water is even entering the tub unless youre standing right beside it.Ive been told that hammer problems exist in ALL high efficiency washers, all are prone to this problem. I was also told by a Whirlpool support person that the Cabrio is a Samsung design and the pulsing of supply water off and on, over and over is normal operation. If I had been informed when purchasing that hammer is a common problem, I would have installed arresters from the get-go. At the very least, manufacturers should include arresters as a part of the sale; installers should make sure that every new installation includes arresters. All told, I am out just under $200.00 for new technology that really could have been engineered out in the beginning.

July 2017 I purchased a Whirlpool refrigerator Model # WRF757SDEM00 S/NK51709722. The refrigerator portion went out, the repairman said it was the fan therefore I spent 351.00 dollars for house call and fan. When that did not work the repairman spoke to whirlpool and they said the panel of small computer may go out with it 212.00 plus tax. Did not allow that and tried another repairman who said the value that switches from freezer to refrigerator was out and if I could find someone to fix it would cost between 600 and 800. I went out and bought a Samsung because on the front said 10 year warranty. At least anything is better than 1 year whirlpool offers. There is NOTHING in the name.

LEDs on control panel started going out in four months. It’s a 400$ part. Under warranty but what’s going to happen in another four months? The range I had from the eighties was still working. You don’t get what you pay for anymore. Just excuses.

We are on our 3rd washer and second dryer in 10 years. Our latest replacement (Whirlpool Duet Washer and Dryer) was purchased 3 months ago and is already broken and now we have been without a washer for a whole month. Not only do they have issues with the control panel and latch, but they smell. The dryer also had a control panel issue. Trying to get our units fixed presented even more problems and wrong parts would come in, with weeks going by without parts/service. Apologies and sympathies expressed on the phone are not enough. When you buy a matching set and only one breaks, you tend to replace the matching unit, which we regret and we went back and forth with our washer and dryer. I would never recommend a Whirlpool product after this. We finally got a replacement today and due to more poor communication on their end, they could not hook up. My new washer sits in the laundry room, and I hate it before I even get it hooked up.

Mine is a stacked unit...saves space and I just love the stooping over factor... BUT, its an energy saver and I always have to add about 5 gallons of water to it for it to cover even half a normal load...ugh!!!

I purchased Whirlpool top loading washing machine model # WTW57ESVW less than 2 years ago. It stopped working yesterday. I had a trusted professional repairman evaluate it today. The motor needs to be replaced after less than 2 years?! The customer service reps basically said sorry. I should have purchased the extended warranty. Is it not reasonable to trust that a Whirlpool washing machine motor should last more than 2 years.I am very unhappy and very angry that Whirlpool will not stand behind their product. The last customer service rep I spoke to suggested she could send one of their repairmen and replace the motor at a cost to me of $299.00. So, after less than 2 years, I am offered an amount to pay of about half the cost I paid less than 2 years ago for the brand new washing machine. My home is full of Whirlpool appliances. I have been a good and loyal customer for over 30 years. I am very angry and upset with Whirlpool. Please explain to me why it is not reasonable for me to trust and believe that a Whirlpool top loading machine that is well cared for and not abused in any fashion should last longer than 2 years? Is this being a loyal Whirlpool customer gets you, I should have purchased the extended warranty”? We are talking about a motor here, not a fabric or bleach dispenser that breaks. Although, those parts should not break either, there is a big difference from something like that and a motor. Please contact me as soon as possible at either number listed above. Thank you.

In August of 2008 I purchased a Whirlpool Amana refrigerator, Model# ABR2227FES. It worked great for exactly 6 years. In Aug of 2014, the motherboard needed to be replaced as it was not forcing a defrost when needed. I tried to get a refund on the cost of the part and labour but both were refused. In Dec 2016, just two and half years after the motherboard was replaced, the exact same problem re-occurred. Again I tried to get a refund on the cost of the part and labour but both were refused. Will I be buying this refrigerator in the future? A definite no!!!

The repair technician just left telling us that our Whirlpool Cabrio washing machine is fine. It is a little over a year old, makes LOUD noises as it runs, doesnt get the clothes clean and often doesnt even get them wet. The clothing sits above the water and comes out with pet hair, soap and dry spots. We use it the way the manual directs but it seems to be a totally defective machine. We sure wouldnt sell it to anyone nor give it away to some poor unsuspecting soul. Guess it needs to go to the dump. Shame on you Whirlpool for taking advantage of so many of us.

A Whirlpool dishwasher was installed by Skyline, a modular home manufacturer, and we occupied the house on August 21, 2014. The appliance never worked and Whirlpool sent repairmen 9 times over 9 months to either repair or determine if it should be replaced. It washed the dishes exactly 4 times in that time. Complaining to Whirlpool only caused a supervisor to scream at my wife that we were the cause of the malfunction. Nearly every part was replaced & they still refused to exchange it for a replacement new one. The modular home manufacturer received the same treatment appealing for us.

My wife and I bought a Whirlpool Cabrio washer and dryer set less than three years ago. And so far the dryer has been ok, but our washer has had to have a new motherboard and now it smells like its burning. Our last washer and dryer set was a hand down and was over 15 years old and never had any issues like our new ones do. Ill never buy another Whirlpool product again.

I bought a high-efficiency Whirlpool washing machine in August 2011. One week after the warranty ran out, it stopped working. I called Whirlpool who, of course, would not fix my problem because I no longer had a warranty but did put me in touch with a repair company in my area. They came out and fixed it for 100 bucks, service and parts (service, of course, cost more than the part/labor). I didnt mind the hundred bucks, whatever. My washer was working again.Two weeks ago, I experienced yet another problem with my washing machine. Now, I understand machines getting used a lot over the years and eventually burning out, but this machine is a little more than a year old. I should not be experiencing problems with such a new machine. The problem was when the machine reached the spin cycle, it would just stop working and then lights would start blinking, blah, blah, blah. I called the repairman again who came out and reset my machine, hoping that that would work. He then told me if it happened again to let him know and he would have to replace the motherboard. Okay, I can live with that. Another 73 bucks, thats fine. Of course, this didnt work, and we ended up replacing the motherboard. Another 178 bucks - thats $324 that I have now invested in a washing machine, half of what it cost to begin with. But its an investment, right? And I need clean clothes so whatever.I was a little wary when the repairman told me that a problem with the motherboard may be related to a problem with the motor, that it can send signals to the motherboard if its not working and is just a symptom of the actual diagnosis. I guess he was right because 3 loads into using my newly repaired washing machine and the same problem has arisen, yet again. I refuse to invest any more money into what is obviously a lemon. Rest assured I will never again purchase a Whirlpool product, regardless of what type of appliance it is.

Mid-sized, mid-range dishwasher. It is noisy, not quiet at all, and we must speak quite loud over it if we want to be heard. The wash cycle is quite long... not really a water saver.

We bought Cabrio washer & dryer a year & half ago, and I hate, hate, hate the washing machine. Every load, it goes off balance. And you have to stop your other work, unlock & wait awhile on that, and rearrange your load of clothes. I called the repairman when I first had it, and he said, Oh yeah that happens, nothings wrong. OMG! How I wish I had returned it. If you dont rearrange the load when the cycle is done, your clothes are still soaked. So you have to re-drain & spin. Total waste of money & a lot of my time. Very very dissatisfied and will never buy another Whirlpool product.

I am a mother of 4 children and 3 grandkids, I love cooking and baking. Before I can post a review on a product or appliance I like to wait and give it enough use to test it. About 2 years ago I purchase a Whirlpool range. I trust the Whirlpool brand because is durable, easy to maintain and simple to operate. After owning my first Whirlpool refrigerator for over 15 years, I am happy to post my review on my almost 3 years old Whirlpool gas stove and oven. I am a satisfied and proud customer of Whirlpool!

We purchased a Whirlpool side by side refrigerator from a local appliance store in December, 2018. We immediately noticed a loud humming noise coming from the refrigerator when the motor is running, which is a lot. We can hear it from our bedroom on the other side of the house. The store replaced the motor and the fan, but the constant irritating humming continues. The store called Whirlpool for advice, and were told that side by side refrigerators are louder. They also said that since it is working there is nothing they can do. We had a Kenmore side by side in the very same spot for over eight years. Never noticed when it was running. We will never buy another Whirlpool product again!

They contacted me to replace the washer. And the uninstall/install will be at my own cost. Its more generous than I expected. I thought they would send another technician and make everything go back and forth. This solution does save my time. I hope the new machine wont have all the series of issues.

I have used my Maytag washing machine weekly for the last 11 years... Never a problem. Just a well made, basic machine to wash clothes thoroughly. It does not have all the bells and whistles some of the newer models have, but it is a washing machine, not a video game.

I bought a Whirlpool Cabrio washing machine from Lowes 3 short years ago. Within the first year, it needed a new main board. Now just 2 years later, it needs another main board. It has never worked correctly. I have purchased another washer from another manufacturer and will never buy a Whirlpool product again and neither will anyone I talk with about this. Dont buy Whirlpool products!!

I bought my Whirlpool Duet set with pedestal in February 2008. I just had a tech here to figure out why my machine is so loud during agitation and that I cant hear anything else. He said its the drum hitting something. I never overload my machine - just normal use for 4 years. It costs more to repair the machine than to buy a new one. Now, after seeing this information, Im not the only one who has this problem with my Whirlpool washer. I am disappointed that there isnt anything else the Whirlpool company tech can do for me - just a receipt that shows the parts alone cost $600.00. Now, I have to pay about $50.00 just to get rid of what from the outside looks like a perfectly good machine.

I am so disappointed in my whirlpool W10431035A gold series dishwasher. I bought this 2 yrs and 2 months ago on black Friday at a lowes. I wanted to have a whirlpool and I thought they were a good brand. It has been a little over 2 years and my dishwasher no longer works. The start button no longer works. It is not even that old and appliances should at least last 4 years. I could understand if the plastic utensil holder or dishwasher rack breaks...fine, you use plastic. But this is an intricate part of the dishwasher....the start button and it does not work. I am so disappointed in whirlpool. It is the start button...how can this break. The only thing I do is press normal cycle and the start button...that is it. How can this machine break so easily. How can whirlpool build and sell such a faulty product. So disappointed.

Whirlpool washer is junk. Expired I. Less than 4 years. Cost to repair is more than new washer. DO NOT PURCHASE WHIRLPOOL PRODUCTS. Agitator motor burned up without notice. No troubleshooter problem. 2 repairmen suggested I buy new washer.

Have to keep coins collecting in pump and ruins pump or starts leaking. I feel there is another way it could be solved. I spent enough for this washer. Now I fix that. Now it leaks on discharge hose. Hard to stop it. Like old washer worked lot better all round. Never had that trouble. 4yrs old 1,200.00 plus cost sending somebody out to fix it. Crazy! This happen more than one time with this machine. Thank you.

Everything I have read is what I am going through... First the clothes didnt come clean. Lint piles on everything dark... Then at 1 yr and 7 months old, the drum and spin mechanism breaks. It cost me $333 in labor... Should have cost me nothing as far as Im concerned. 2 weeks later, its putting a code up that the hot and cold lines are crossed. Nope, its the whole computer board. Whirlpool again said they will just pay for parts... piece of crap. I paid for the best... Sure didnt get it.

I purchased my Whirlpool Gold Series refrigerator from Lowe’s in Rockledge, FL. This was my third purchase after returning an LG Refrigerator as well as a Samsung refrigerator for having multiple defects! My Whirlpool Refrigerator purchased June 2014 has motherboard replaced that showed obvious evidence of factory board flaws when boards were manufactured. Top mounted ice maker drips so much water it fills my veggie draws with water ruining my food. Mold is present inside my ref now from constant leaks. Drawers were replaced by tech also due to ill-fitting design during first few months. Water will not dispense in door after one year, gave up using it. This is a horrible and very expensive appliance wrought with POOR DESIGN FLAWS. WHIRLPOOL does not care about its consumers. Their engineers must be some of the worst in the world. Our old 70-year-old kerosene powered refer in the Bahamas is still making ice, yet most modern day refs are like buying cheap home computers that constantly need service to keep them running. It’s a lifetime investment with $89 first service visit to determine problems then weeks of waiting for parts and second visit for the repair to be completed until next electronic malfunction. DONT BUY A NEW WHIRLPOOL APPLIANCE. WAIT AS LONG AS YOU CAN FOR ALL THE CLASS ACTION LAWSUITS AGAINST WHIRLPOOL & Kitchenaid to play out.

Purchased washer Aug 2012 and has increasingly been leaving white residue after wash cycles. Have used the Extra Rinse function to no avail and use half the recommended amount of HE Tide. Now I have to run the Rinse, Drain, Spin function twice with darks to remove the residue. I have also been doing the monthly maintenance which has not helped at all. This machine seriously detracts from the Whirlpool name and if they are unwilling to fix the problem, it only publicly displays the companys integrity.

I bought the new Whirlpool aqua clean last year - they guaranteed me at the store it would clean as I explained having a clean oven at all times was extremely important to me. They assured me I would be pleased with the results. I have never disliked an oven as much as I do this one. The tech came to the house and checked the temperature of the oven as I also complained it was baking uneven (the back was overcooked while the front was underbaked) but the temperature was right on so nothing can be done. As far as the cleaning goes all I can get is a new bottom pan for the oven as I have four years of insurance. Not happy as I would like to have a different stove. I WOULD NEVER RECOMMEND THIS OVEN TO ANYONE.

I loved the Whirlpool Refrigerator! Nice size and always worked well. Had to replace it after condenser quit working. This current fridge is unhandy in many ways. No light in the freezer and size is too small. Had to fit into existing space, but does not have as much storage space as the KitchenAid that fit in the same space.

We purchased this Gold Series Whirlpool Dishwasher about 4 years ago. It worked very well up until April of this year. At that time, the main pump stopped working and it has to be replaced. There are just two of us in the household so the dishwasher was only used 2 or 3 times a week. We also kept it very clean with no build up. The gasket around the soap dispenser came out and one of the wheels fell off of the bottom rack. We just feel that 3 1/2 years is too soon for a major appliance to stop working and fall apart, especially given the light usage.

Ive trusted Whirlpool washers for 20 yrs. Ive only had to buy 2 in my lifetime and neither have let me down. I will always purchase Whirlpool as it is a brand I can trust. Features and reliability are important to my family. Whirlpool has it all!

I am following up on a review I submitted on April 22, 2015 about a Whirlpool refrigerator with french doors and bottom refrigerator. At the time, paint was falling off from the door as pictured in the previous review. This another chapter on this story and probably the closing chapter. A few months after the paint event which I could have lived for a while, the right door hinge literally disintegrated leaving the door without support. The door seals material is of such poor quality that they have disintegrated and the water condenses inside. The bottom photo shows hinge components that came off the door hinge on the kitchen floor. The second photo from the bottom up photo shows how the door scraped the plastic of the freezer door top trim if the door is not lifted to clear it. The second photo from top to bottom shows the door over the hinge pin if I am not careful lifting the door to clear the freezer door.The first photo from top to bottom shows how the door remains open if not lifted so that the door magnetic seal keeps it in place. It is very hard for me to believe that a country like the United States of America treats its customers with no respect. I met my obligation to pay the amount on the price tag of this appliance but I cannot say that Whirlpool did its part of providing a basic quality product. There is no consumer protection agency in this country to protect consumers from corporate predators that have no sense of a fair deal with a customer. So here we are, being abused by United Corporations of America. I hope the future brings a different understanding of the american people on these matters. Thank you for the opportunity to express myself on this matter. Next step... buy a foreign made appliance that will support another country work force... sounds familiar.

We purchased the Whirlpool Cabrio washer and Dryer May 2017. First, this washer is SO LOUD! Honestly, NEVER had a washer that is this loud on the spin cycle. My second issue is, that when I wash my blacks, they have white splotches streaks on them. I use ALL clear and free liquid washer and Downy softener, so I stopped the softener, and still the white streaking. Ive since will use the additional rinse on during the wash, but still leaves white streaks. After 3 separate rinse cycles, no streaking. This leaves me thinking that with the lighter colored clothing, there is probably streaking as well, just can see it - my conclusion is that the clothes arent getting cleaned properly, or rinsed. Another issue is the dryer. First, takes longer than all my previous dryers, even the set 110 mins for towels on high, still takes longer. My washers are not packed tight with clothes either - its just my husband and myself - not a lot of washing. Also, I noticed a crack in the inside dryer/drum where it looks like the paint is chipping and cracked. I used some high heat touch up paint, and it did not help. Needless to say, what I thought was an good reputable product, turns out to be, not so good.