1 year ago I purchased the top of the line large capacity tub cabrio washer and dryer. I dont understand why they sell a large capacity when you dont get enough water to get a handful of stuff clean. If they offered a trade in allowance for a standard agitator washer I would be first in line. Clothes dont look clean at all. Save your money folks not worth it.

I bought a Whirlpool washer and dryer a little over a year now and the washer is not filling enough water for the cycle to wash properly. I have to fill the washer myself and this only started a couple of months ago. This happens even when I have a heavy supply of water.

My Whirlpool is almost 20 yrs now and we thought we were going to have to get a new one! New ones aren’t equipped with what mine has so after much investigating we decided to try a water inlet part for $35 delivered and oh to our surprise it is still performing like new. We bought the top of the line and it still is! Thank you Whirlpool. You are what you say you are. Arlene **.

What a piece of expensive junk! Do not buy it, does not clean clothes well, lid broke, lock broke, now it just wont start. Parts are super expensive. Next one I buy will be a basic washer, forget all the bells and whistles!!

In November 2012 we purchased a Whirlpool Gold Series refrigerator, model WRF990SLAM from Lowes. This model has the ice maker in the door. We also purchased an extended warranty. In July of 2013, we contacted Lowes service because the refrigerator had ice inside it, top left, where the ice maker equipment is located. Also, under the ice bin, there was a solid block of ice. Water was dripping onto our food inside the refrigerator. August 6, a 3rd party repair company came and replaced parts. One week later, the same issue was happening. We called for service again. It took until 9/9 for them to come out again, and replace the same parts. Approximately 2 weeks later, SAME problem. This time, I called Whirlpool directly. I was told that they (Whirlpool) are aware of the problem with this model, and they should have new parts in by the end of the month that will fix that problem. They even have a special team for this! I asked for their direct number (866-461-2287). On 10/7 I phoned again asking for a status update. I was told that they were just waiting for approval to call consumers to set appointments, and I should hear from them by the end of the week. I also informed them that I was no longer able to use the ice maker or water dispenser because it was now leaking substantially into the refrigerator. They made a note of it. As of today, 10/13, I have not had a call back. This refrigerator cost us nearly 2500.00 and has a known defect! Tomorrow, Monday 10/14, I will begin to demand a new refrigerator (different model!) via Lowes AND Whirlpool. Too bad Whirlpool. Were now going to buy a new gas range...and I can guarantee you it will NOT be a Whirlpool!

Purchased this fridge just over a year ago WRF555sdfz for over 2K. The stainless steel is starting to come OFF. Advertised as stainless Steel. Must be fake! Called customer service. I was told they could do NOTHING because it was a cosmetic issue. Remodeled our entire new kitchen. Thank god other stainless steel appliance are made by other manufacturers with no “COSMETIC” ISSUES. Will never buy another Whirlpool product and I will tell everyone I know.

This washer & dryer is the extra large capacity combo. Uses less water but surprisingly the clothes come out clean as a whistle. Less detergent. Sin all cleans clothes excellent & saves you money. A win/win!

Bought whirlpool Cabrio at Lowes. Would not complete spin cycle. Had Whirlpool Service Tech out. Seals were gone. Bearings shot. Rotor and stator from motor shot. Wanted over $500.00 to fix. Called Whirlpool and they did nothing. Spent $100.00 for the service call. Ive read all over the internet about similar issues. Never heard of 4-year old washer so badly damaged. Piece of garbage. Very unhappy and will avoid anything made by Whirlpool again.

I purchased a 40-gal Whirlpool water heater model 40t91-403 last week and paid a plumber to have it installed. The old one (GE 40 gal) worked fine except for a leak. The new one used all of the old connections except the 2-inch in and out pipes. Same connections, hot, cold and gas. At first I got about a quart of hot water and then all cold. Whirlpool changed the valve and cold water pipe (inside the tank) and still the same. They are trying to tell me that the tank is fine - I have a plumbing problem. Two plumbers have told me different, but still they insist. Yes, I am upset. The old GE, even with a leak, performed better!

Frontload Sport Duet ht: After just 8 years, bearing out on washing machine. Just had repairman out. Cost more to fix than what I purchased it for. I bought both the washer and dryer, thus the reason for the duet. So now I have a good dryer and lost its mate. I am not going to purchase another one. Very disappointed. I will not be purchasing any more Whirlpool products in the future. Off to the laundromat.

I have a smaller/apartment size fridge. As a 1 person household it is a perfect fit. Works well & wasnt expensive. I am a Foodie, having it so nothing is too warm/cold, all the temps are equal, is a big deal. And in 10 years no breakdowns.

Whirlpool microwave came with my new condo, and its as aesthetically pleasing as it is functional. Very easy to use, sounds are not annoying (as my last microwave was) and heats food quickly and evenly, as needed.

I am very upset with this company. I bought my fridge two months ago from Sears. The fridge is leaking water and Im having a lot of problems with the freezer and the ice maker isnt working at all. Ive been trying to reach the company but they always leave me hanging in the phone and never answer and keep hanging up. I am very upset with this company. I wasted a lot of money for nothing. Please people dont buy fridges from Whirlpool and dont waste your money.

Exterior metal reaches temperatures that cause minor burns on an adult finger and could be potentially more dangerous for a child. The self-clean feature has crashed the oven on two out of three uses of this function and overheats handle.

After 25 years my Maytag died. It was a Sunday so we just decided to go to Lowes & purchase a new one. They could not find my 1st choice so I bought the Cabrio. It is the worst washer I could have purchased. It determines the amount of water you need. Our clothes never seem to be clean & its very noisy. It has no agitator & is supposed to save water. Even putting it on the longest cycle our clothes do not appear to be clean.

I bought a Whirlpool washing machine from Home Depot 4 years ago. It immediately started to grow mold in the seal even though I wiped it clean after usage. I called a certified technician to replace the seal. As he was removing one screw on the lock the Washing machine shorted out essentially destroying the panel and rendering the machine broken. I called Whirlpool and told them that the machine was defective otherwise, why would it do that? My technician has worked on hundreds of machines and this is the first time this has happened. The two managers I talked to refused to help me because I didnt have an extended warranty.It is true that I dont have an extended warranty but also, I had faith that Whirlpool had sold me a good product. There is no other explanation for the washing machine to do that other than it was defective. I asked the managers to send me replacement parts, but they refused to do that. The last machine I had was a Maytag that lasted 20 years and when I gave it away, it was still working. I expected no less from the Whirlpool I purchased at Home Depot.

Whirlpool Cabrio Model Wtw8000BW - Purchased machine Jan. 2014. It does not wash my clothes clean. Clothes come out with dirty streaks all over them. The clothes I dry on a line smell dirty, like they werent rinsed properly. I have been cleaning the machine the first of every month per the instructions. I will never buy another HE washer again, this is my second one. Purchased a new one with an agitator.

I bought three Whirlpool appliances (fridge, gas dryer and washing machine) from Abt in June 2012, delivered in July 2012. The fridge has not cooled from the moment we plugged it in and because I am out of state from Abt (IL), I have to deal directly with Whirlpool. According to both the Whirlpool customer service rep and her supervisor, if a product is defective from the start, Whirlpools policy is to try and repair it until they determine it to be scrap and only then will they replace/refund. I find this policy appalling since I paid for a good working product, from a company Consumer Reports rates very highly, but was shipped a defective one. Now, I have had two service visits, the second because according to Whirlpool the first technician did not perform the correct service. I have been told not to put anything valuable into my freezer for 5-7 days because most likely I have a coolant leak and the fridge is bad. This is terrible customer service and instead of fixing their error which is the purpose of having customer service, they are quickly building a reputation for a terrible product and terrible service. Good customer service would be replacing the defective fridge as it is clearly their manufacturing issue, taking the item back to their warehouse, repairing it if possible and selling it as reconditioned for a discount. I am noting my suggestion in case any Whirlpool representatives read this website. Another interesting item to note is the gas dryers absorb air from the environment around them so if you do any painting (full room or touch ups), the clothes that come out of the dryer may have a burnt/gas smell for up to 7 days. I am still waiting to hear back from the Whirlpool technician as to my burnt smell problem/resolution, but was told this from a separate service representative so I thought I would pass it on.

My son purchased a Whirlpool washer and dryer as a Christmas gift on 12-24-10 from Sears. It didnt wash the clothes properly and I would have to rewash them. Also, it would not spin the cloths properly and the top would take forever to unlock. Then in July, I called for repair because the water would not spin out at all. It took at least two weeks for them to come out. Another two weeks to get the part they ordered then to find out that they also needed another part that was not diagnosed in the first place. After another three weeks had gone by and having to go to the laundry to wash our clothes several times, it was finally fixed. I continued to have problems with the clothes not getting cleaned. How can this possibly be an energy efficient product when you have to do the load twice? I am so grateful to my son for the gift but am so dissatisfied with the product. I rate this product 1 out of 5 stars.

The stainless steel refrigerator door is rusting after only 5 months and the company respond it is cosmetic and we the customer have to live with it.... They will send a cleaning product which didnt remove the rust. Review that was written on the company facebook page wasnt published because it didnt meet the company website guideline. Its disappointing and frustrating to realize that we have to go through it. Not happy with customer service.

I purchased the Cabrio washer and dryer 4 years ago and had no problems until recently. The motor and the harness broke and the cost to repair was almost as much as a new washer. The repairman told me that this is a common problem with all washers that Whirlpool makes as they have the same motor and harness. He gave me a list of all the brands that they make and suggested if I buy one to get an extended warranty. I would not recommend anyone buy an appliance from a company that continues to manufacture faulty products. I wonder if they own the extended warranty company?

We have a built in double oven and we had some early problems with the thermostat. And from time to time the clock resets to 12:00 oclock when there is no other power outage indications. Its also been a challenge understanding the instructions sometimes.

We bought all whirlpool appliances at our new home 4 months back. Our refrigerator has stopped working from the last month. We had 7 different service team people come in to check and they temporary resolve the issue (taking out a plastic piece from the top of the refrigerator, just re fixing the ice machine, or just walking out of our home doing nothing).Friday someone came and tried fixing it and took about 3 hours. The fridge completely Broke down after that in about 6 hours. Whirlpool customer care wants to send another technician in and want them to have them talk to their technician and maybe after that they can do something. This is the 8th time some technician will be coming home. And clearing these technicians curse whirlpool and dont call them. The customer team at whirlpool suck, there is no damn replacement or repair policy. All scheduling is after a week and whirlpool does not give a **. I really hope this company is sued for the emotional and mental stress and the harassment they cause to their customers. Very frustrated. Have no idea what to do.

I am very disappointed with the purchase of a Whirlpool Cabrio Washer and Dryer I made about 3-4 years. The price was too high and the quality is extremely poor. It has a leak in the pump which will cost me $300.00 to fix. I probably would have been better off buying the cheapest washer and dryer set they had. At least, those actually wash the clothes and dont breakdown. Never again will I buy a Whirlpool and I will get every chance to share my opinion of them.

I purchased a water heater Model # UG1H50400TBN, Serial # 0913T400920, from Lowes in Corona, CA. 05/07/2009 for $528 plus tax. I have replaced the following parts: 02/10/2010 Thermostat Valve, 07/23/2010 Thermostat Valve (2nd time), 08/10/2010 Burner assembly, 02/10/2011 Thermocouple, 02/17/2011 Thermostat Valve (3rd time), 12/17/2014 Thermocouple (2nd time) and 03/20/2015 Burner assembly (2nd time).Today I called WHIRLPOOL Customer service (877) 817-6750 because my water heater water is warm. I told the tech support agent that the pilot light was on so we agreed that it was the thermostat valve AGAIN. He wanted $30 for overnight delivery and I refused to pay. Now I have to go out and buy this part because Whirlpool like the Banks is too big to fail and they have license to RIP-OFF the consumer without penalties. Whirlpool has all of information and they can verify everything I wrote here just by the serial number.

Purchased a $900 refrig, it broke 1yr & 1 week later. I fought to have this fixed since its out of the warranty period. After having to take off time of work for repair people to come. The repair guy made a disaster. Finally after much arguing I received a new refrig, same model. Well that last about a year & 1 1/2 then it started leaking underneath. I CANT use the icemaker or the water feature which I paid extra to have. What a piece of Junk. The people at Whirlpool will just say, Did you purchase a warranty? YOU SHOULDNT HAVE TO HAVE IT FIX WHEN ITS ONLY 2 YRS OLD!!!!!! They are so greedy, they make junk so that you spend more money on repairs or extended warranties. Whirlpool owners & mgrs see how you feel when it happens to you. KARMA. I will tell as many people as I can to stay away from Whirlpool. I will never purchase their products again.

Whirlpool Cabrio top loader washer - I am writing to really complain about a washer I bought there at Metro. The people were great BUT this washer has been a REAL DISAPPOINTMENT!!! It is only 4 years old and I have had to have them come and replace the top of the machine. It has rusted around where you put the bleach, the soap. It leaks underneath the machine, its rusting on the bottom of the machine horribly. SO DISAPPOINTED!!! We bought all WHIRLPOOL products - washer and dryer, stove, microwave, dishwasher.What is it with these things? They rust so easy. I had a washer before this one for 14 years and it never did this. I guess things are not made with the same quality as years ago, but I will not ever spend my hard earned money on WHIRLPOOL AGAIN!!! I guess I will have to put up with this machine till I can afford to buy something else. VERY DISAPPOINTED CUSTOMER!!!

I bought a 40 gallon Whirlpool water heater product no. 0733336 and it completely broke down after one year and three months. No pilot light even. I called the number on the unit and was informed that only the cost of replacement parts would be covered by warranty. I still have to pay someone 60.00 an hour to come out and fix it. Never again will I buy a Whirlpool product.

Within 10 days of installing our new Electric range the cooktop does not look new and although we have used the prescribed cleaning methods, will not remove some cooked on spills over one burner and another burner has white rings around the glass above the dual zone cooking element. While we did not choose the top-of-line model; had expected much greater durability and appearance for our new range. My call into Whirlpool service made me feel like mine was an extremely isolated case and yet nothing would be covered as would be classified as customer fault. Highly disappointing as the cooktop on the range that we replaced seemed so much more durable.

Went to Lowe’s, as my old fridge died. Gets delivered & guys wore masks. After they leave the NOISE of fridge I could hear in bedroom! I called right away had to wait for a replacement from XPO about a Week. Guy shows up stinking like ashtray, No Mask to “repair” my brand new Loud Fridge. Heck no was to get replaced. I called Lowe’s 3 times & XPO twice. It’s now June 4th. I’m still waiting! 25cubic Serial #HRX0654908. Horrible customer no service!

I love a refrigerator that keeps my milk and water ice cold and keeps my fruits and veggies crispy and fresh without freezing them.

Bought appliance (Whirlpool French Door Refrigerator Freezer) in 2014. The seal that closes all the brackets with screws and you had to hand guide it to close. Then the freezer got out of alignment and wouldnt close and seal. Ice built up behind drawer which prohibited the opening of freezer drawer. Wouldnt open more than 5 inches on one side and 3 inches on the other. Had service tech out. Cost almost $200. Did not get French doors repaired because the part cost over $125. Less than a year later I have to have a repairman back out for same problem with the freezer door and ice build up. Not happy.

I ordered a washer dryer combination through Whirlpool. I was given a delivery date 2 weeks out. Whirlpool employees must be doing their laundry very sparingly if they think that this would not put a strain on a household. But I was willing to wait. I asked the date and they wouldnt give it to me. A week later they called with the date and I asked the time. Again they wouldnt give it to me. However they said they would give me the time the night before. They then called with the time, which was during work hours. I told them I would be unable to do this during work hours and they gave me the only other optional date, also during work hours. I finally agreed and took a 1/2 personal day. When I arrived home. I received a phone call from Whirlpool that they will not be delivering my washer/dryer unit at all and to pick a different date. I canceled altogether.UPDATED ON 02/24/2016: I have worked hard to not get upset at companies. However I feel that this is an especially poor company and I cant remain silent anymore. I bought a Duet Washer and dryer over the phone with Whirlpool. It took 3.5 weeks for it to get delivered because Whirlpool kept cancelling. Each time, I took a 1/2 personal day so that I could meet the delivery people within their 4-hour window frame. On the 3rd attempt, they were finally delivered and set up by the delivery men.During the 2nd time I ever used the product, it stopped working, making a horrible grinding noise. I had to unplug the machine. My husband came home and hes pretty handy. However he was unable to even press 1 button. I had a friend in the repair business come the next day and he was unable to repair it. I called Whirlpool again and they said theyd have a repairman out the next day. They outsourced the job to a local company and Whirlpool sent me a confirmation email with a time and date. Again I took a 1/2 personal day. After hearing from no one, I called the repair company. They said they had no record of me in the system. I cried.I called Whirlpool and was put on hold for 3 hours. I hung up and called again. They said my department closed 8 minutes ago and they couldnt take my call. I asked how that could happen considering you began the call 3 hours before that time and would have stayed on hold until I died had I not decided to hang up and try again. Every time previous to this I had been on hold for a minimum of 1 hour.I have been trying to return the product. They tell me that Im unable to because my product is functional. I told them it was in fact not functional, which was about the 3rd time I said this, and they said Ill have to call back 1st thing in the morning. I told them I cant risk any more work time to deal with this poor company. So they put me on hold again and thats where I remain. I am currently going on 27 minutes.

I have used Whirlpool products for over 30 yrs. This is the worst made product I have ever purchased. The ice maker doesnt produce very much ice. The cold water on door isnt cold. There is too much wasted space in freezer and refrig. side. You cannot get anyone to call you back to call for help. I contacted Whirlpool over a month ago. No return call yet. Consumers beware!! Model no. WSF26C3EXF01.

I have had repairman out on two separate occasions to look at the dishwasher. It leaks. It’s unpredictable. Unless you run a full three hour cycle the dishes come out with dish soap still on them. I am very unsatisfied with this dishwasher.

Subject was included in our new condo less than 5 years ago. It appears that all we have to do is look at it and it falls apart. There is constantly another piece of plastic on the counter. Our experience in calling Whirlpool for service is that it is very expensive and time consuming. A refrigerator installed at the same time as the purchase had a defective ice maker which took three service calls and a final installation of a broken part by me before we were together again. 2 (two) service men recommended that if we had problems again that we do what they did. Buy Ice Cube trays!!!! What a great recommendation.

Whirlpool Cabrio washer w103386894 - I have had nothing but problems with this piece of crap washing machine. Either the clothes come out soaked at the end of the spin cycle, or it gets stuck in a cycle and repeats. It makes so much noise you can hear it through the whole house. It is less than three years old and now it is leaking water. I had a base model Sears Kenmore that I had for over 12 years and it died from old age. This Whirlpool is pure crap, do not buy.

I bought a matched set of Whirlpool washer and dryer. Within about 3 months the dryer quit running on any of its cycles except heavy duty. About a month after that the washer started messing up. First it quit putting in the bleach. Next it quit adding water except under the heavy duty cycle. Then after about another week or so it quit putting in fabric softener. After a couple of more months it only uses hot water. Now not quite a year after I purchased it the washer now only adds water in the wash mode and not the rinse cycle. Now all this would not be a problem except I had lost the warranty cards and in their website would not let me register it online.

I purchased a Cabrio washing machine and discovered multiple repair issues over the last few months. I have had to replace a pump for $85 and now the machine will not complete a cycle. I found out the the whole thing is rusted above the barrel which is causing a leak in the back and leaving our floors covered in rust shavings. From my research and reading others reviews and issues, they pay for a serviceman to come out and still it does not solve the problem. My husband is a student in college and we are living off student loans. We bought this machine because we trusted that a Whirlpool would last and be a good investment. I am very displeased on this machine and doubt I will ever put my trust in Whirlpool again. I called to complain and got the typical response I have read others got. I am not paying for a service call when it will not fix the washer in the end. I plan to file complaint after complaint and encourage any class action suit against Whirlpool for producing a poor washing machine and misadvertisement on this machine. I will move forward in this. I feel that as consumers we have a right and should have a sense of ease when you spend $900 on a product that it should work and not give out as it has so quickly. If there has been multiple people with common complaints, then there should be a recall on this washing machine.

I spent what I consider to be a lot of money on the Whirlpool Cabrio washer and dryer which I purchased in 2007. Within months, I was getting error messages on the washer, specifically an F51. Thankfully, it was covered by warranty. Whirlpool knew then and there that these things were lemons. The repairman told me he couldnt keep up with fixing that issue. I have since had to replace the motherboard on the washer at a cost of $359, and the idler pulley on the dryer at $221; not to mention the metal catch on the dryer broke. I ordered a plastic one on eBay. I will never buy another Whirlpool product as long as I live! They make junk!

Aqualift technology does not work!! This is absolutely the worst product I have purchased from Whirlpool. The aqualift technology DOES not clean the oven, even if you clean the oven after EACH time you use it! I am not able to bend over and spend the afternoon in the oven. And even when I do, I cannot get this oven clean!!! Please DO NOT buy a Whirlpool stove with an aqualift technology oven cleaning process!!! You WILL be sorry!!!

I have had my stove for 3 years and it works fine. However since I have become a grandparent, I have been extremely worried about the chance of being burnt. the problem is once you turn off the burner, it doesnt look any different than it does when not in use. It stays hot for a very long time however. Hot enough to burn or melt anything. There is no blocking a child from reaching up and touching it. I have placed a loaf of bread near it only to have it melt down the side. The burner didnt look hot at all. This was at least 15 min. after turning off the burner. Im not trying to cause issues but I believe this is a real danger, not only at the risk of someone getting a burn but also to the point of an entire family losing their home or even their lives. A simple flammable item being knocked over could start a fire. I ask that someone look into these risk.

Why does your AquaLift self-clean feature not work? Tried numerous times & have been scrubbing all afternoon... Horrible!!! My last oven (Maytag) self-cleaning feature worked awesome, just had to vacuum out ashes & wipe down with regular soap & water. Have no idea what to do to get this oven cleaned!!! Very frustrated...

Whirlpool convection/microwave GMH6185XVS - In 2011, we purchased a whole new kitchen for our home with the top of the line Whirlpool products. The sorry side of this project was our microwave. This product has been terrible for us! It has been removed from our wall 4 times for failing... and four times we have gone for weeks at a time with a big hole in our kitchen wall!! All of the failures were due to the microwave not heating food or drink, and all, according to our local dealership, were for various different reasons. Again, it has failed and our local appliance center who we bought everything from does not want to deal with it anymore. I dont blame them... I dont either!! It looks beautiful up there above our range telling me the time of day... My wife and I are older adults and take very good care of everything we own. There certainly has never been any abuse to this product (not to mention we spend half our year at a winter home so this microwave only is used for 6 months a year). I contacted Whirlpool customer service about the reliability of this product and their response was that it is now not under warranty and we should deal with our local store about repairs. I have a small Sharp microwave sitting on the counter below this crappy excuse for one that stays there all the time in anticipation on the Whirlpool going down!!! The $60.00 Sharp never fails me!! This was our 2nd time around purchasing all Whirlpool products for our house. We did the same thing when we built back in 1990. All appliances performed as they should have back then. It seems Whirlpool integrity has gone downhill. I will never buy another Whirlpool product nor I will recommend to anyone I know to do the same. Good luck to anyone who purchased one of these.

Purchased a Whirlpool range. Shopped around for several weeks before I found what I thought was a good price and with a rebate! Ive owned the stove for 2 months and 7 days... guess what? The stove broke. The burners popped. I called to have it serviced and remember that it had a rebate. I never received any paperwork on the rebate but figured its Whirlpool, good company. Wrong... its not that I didnt have the rebate paperwork but the rebate has expired... even though I didnt get any paperwork nor was there any mentioned of a time frame. Dont get me wrong if it had been 1 year or even 6 months... really 2 months!!! So not only did I not get the rebate of $100.00 I have a broken stove! So tired of being ripped off!

Electric hot water heater model E40H6-45-100 - Purchased at Lowes. Husband installed, tank filled, no hot water coming through house lines. Called support center several times after trying each recommendation that did not work. They kept saying it was a plumbing problem. My husband is very smart when it comes to electrical and plumbing. He has done numerous repairs to our homes over the last 30 years we have been married. He knows what he is talking about and told the support tech that he believed it was a faulty water heater. She immediately said the units are all tested before they leave the factory. The final step was to remove the nipple that the hot water flows through out of the tank and remove the two black bellows. Now my husband can see directly through the piece but also decides to put his finger through the the open whole on the top of the tank and cannot get his finger through - it is blocked. He gets a flashlight and a screw driver. Puts the screw driver through a thin plate that was blocking where the water should be coming through. He can now actually see the water in the tank. This was the whole problem! So they could not have tested this tank. They did give us a ref number to take parts back to store to replace parts we already bought and cannot use. Its the time and energy on whats suppose to be an easy job that counts. Will not recommend Whirlpool products to anyone and probably will not purchase any in the future. Ours was not as bad as most of the other reviews I read but wanted to advise others who may think about what brand to purchase.

The control panel is difficult to use. It’s much too easy to switch power from the top oven to the bottom oven without knowing it. In addition, the plastic cover over the control panel makes it difficult to use especially if your fingers have flour or oil on them. It would be much easier and more accurate if knobs were used to control the all the functions instead of a electronic screen. Also, the clock has never operated accurately. Always runs fast. Temperature of the ovens is pretty accurate. However, it does take a long time to reach chosen temperature. Both ovens are large and able to handle an 18 inch round pizza dish. Other than the control panel, I’m pleased with both the gas stove top and both electric ovens.

Ice maker stopped making ice. This side by side Whirlpool refrigerator was purchased 4 years ago. We called Whirlpool. An authorized repair man identified the problem. At the bottom hinge of the freezer door two of the wires have been broken. A defective design, but no recall from Whirlpool. The solution is to replace the entire freezer door for a cost of $1200. Ridiculous that a replacement door cost more than the purchase price from Lowes. It would appear that these 2 wires could be reconnected, but Whirlpools only solution is an entire new door. Automakers stand behind their products with recalls, but its not the same with Whirlpool. Love my Whirlpool range, washer and dryer, but this counter depth side by side is a real loser.

Same problem a lot of people have written about in your forum. Purchased a double door stainless steel refrigerator, bottom freezer, # GX2SHBXVY from Sears Canada on 12/17/2011. Warranty expired December 2012. Now we have ice forming on the floor under the bottom freezer though water hasnt seeped out as we are now cleaning it daily. Sears wants to charge $75 per hour + parts as there is no extended warranty. Whirlpool says its a common problem with most other Competitor models too. REALLY, ITS NOT. Have checked with a lot of friends of mine with similar models. Nobody is having a problem with especially units hardly one and a half years old. My bro-in-law also bought a Whirlpool a year prior to mine. He is having no problems. See no reason to spend $300-$400 on a comparatively new unit. Also have a 7-month-old stainless steel Whirlpool dishwasher and 4-year-old Gold Accura cooking range. Now spend morning and nights looking at them wondering when they are gonna blow. Need to replace my washer/dryer too but guess which brand I am not opting for.

Brought brand new. Had for ten years. Still going strong. Matter of fact all appliances are Whirlpool. Dishwasher, stove top, oven. I like the sharp clean look in my kitchen. Easy to clean!!

We came home from work and all was well. About an hour later, there was a strong burning smell in the kitchen, like wires burning. Sourced it to our refrigerator. Brought our grandson upstairs to the second floor apartment to get him away from the smell and possible smoke and/or fire. This unit has been repaired several times but not recently. After reading all the same reviews on this problem, we are definitely concerned that a fire may arise. Unfortunately we may wind up buying another, very expensive, refrigerator in the very near future but it will definitely not be a Whirlpool. I wish I could give Whirlpool a ZERO star because that is even too good for this company.

My Whirlpool washer broke down on July 06, 2014. I contacted the local supplier (Unicomer Trinidad) on July 07, 2014. Their technician came on July 10, 2014. He said that he will have to check and see if they have the part that is needed to repair the machine, they will contact me the next day. No one contacted me. I called on July 14, 2014. I was told that they do not have the part and it has to be order. It will take about 2 weeks for it to reach them, no one contacted me since. I contacted them (Unicomer Trinidad) on August 04, 2014. I was told that they do not have the part and it will take 2-3 weeks to reach them. I did filled out a form on the Whirlpool support site about 2 weeks ago but no one contacted me. I contacting Whirlpool US HQ by telephone, they gave me a number for Whirlpool Florida. I was told that they are responsible for my area but when I try calling the number, it was out of service. When I contacted back Whirlpool US HQ, I was told that they cannot help me check the website for the local representative which I could not find. This washing machine is 10 months old plus I took the extended warranty. It is a Duet WFW94HEXL2 washer.

Refrigerator model WRF560SMYH purchased 22 months ago will not defrost automatically. When ice builds up on the back of the bottom mounted freezer, it creates a terrible noise. Only quiets when we manually defrost the ice with a hair dryer!! 4 service calls from the warranty company has failed to solve the problem.

We purchased our suite of appliances from Home Depot, this was a great experience. Unfortunately that is were it stopped. Our 1st refrigerator caught on fire in the electrical within the unit. We got a 2nd refrigerator sent to us and it came damaged. Then they sent us a 3rd refrigerator and it caught on fire in the electrical as well. Weve been dealing with this all since August 27th 2019 and here its now October 14th 2019. At this point I feel this model of Whirlpool is truly unsafe.

Apparently, Whirlpool selling all their rejected faulty washing machine in the market. The trick they are playing is the machine being sold with one year parts-labor warranty; They wont replace these machines with a new one because they know that these machine will never work, consumer will buy the faulty machine, obviously it wont work so consumer will call for service. The service guy will say that “oh! Machine needs a part and then the customer service will say “the part is being ordered”, “wait”, then the service guy will come with the part and after wasting some time he will say “Oh! The machine needs another part, and again customer service will tell the consumer that “you keep calling us”. One year will be gone! Bottom line – faulty machine is sold, Whirlpool made profit, buyer is robbed. I am one unfortunate customer who purchased Whirlpool Washing Machine which never worked as it is a faulty machine which should not go to the market at all; Whirlpool made money on my hard-earned dollars and I been robbed.

We replaced older GE with the giant front load model that can do king size sheets and comforters. It has worked like a champ. It was a bit more but worth it for us. In a year and a half no issues no problems and I like the control lock feature so I dont keep hitting it off when I go thru the laundry room to the garage.

We bought a Cabrio washer model #WTW7300DW0 and are very unhappy. The clothes come out of the washer dirty, with chunks of soap, (yes we are using HE detergent) and patches of lint on them. The low water design is a joke. The clothes on the top of the load never get into the water. The lid needed repair from the first day we bought it. We have tried all the water settings and the clothes on the top barely move. Why hasnt Whirlpool figured out that this design is just not working? Our three month old washer is headed out of our house one way or another! Notice we didnt give it any stars!

I have not had any issues with my washing machine yet as I have only had it for two and a half years. The features the machine offers are good and there are many options. So far the washing machine has worked as advertised / expected.

My brand new oven kept turning off automatically. When reported, they kept sending a technician who kept lying to both parties regarding what the issue was. Whirlpool customer service people have been extremely rude and declined to fix the issue although my oven was under warranty without giving me proper reasoning for their actions. I am truly dumbfounded with this experience!

Purchased the American Made Whirlpool in Oct. 2020. There is plenty of room and there are only 2 adults in the home. It is a basic no frills refrigerator. We do not even need the ice maker that it has. Would purchase this again. The only negative is it makes weird gurgling sounds on occasion.

As you have heard from 700 other people we bought a whirlpool refrigerator because GE sucks, brand new refrigerator died in 4 years with 4 service bill costing more than the refrigerator. So we did some research and whirlpool was being recommended by several stores and the reviews were better than most. Well we bought the Whirlpool refrigerator and it has been nothing but problems from the start. Everything that can go wrong has and of course our warranty ran out. And we are sitting here with no water, no ice, water tray falls out and breaks. Called whirlpool many times and their answer every time is, we will send someone out for you, and then we get a 300 to 400 dollar bill. Whirlpool sucks as bad as GE. Its crazy these companies get away with this crap. They can build good refrigerators they have in the past. My grandparents have one for 25+ years, now you cant get 2 years out of them. Pure Junk! I dont know what a good brand is anymore, they all seem to suck. Good luck.

This machine (Cabrio) is a piece of junk. It does not fill up with enough water to cover the clothes, even on deep wash and your detergent will still be sitting on top at end of wash and clothes are not clean. It was a $900.00 machine. We need to file a class action law suit. Worthless waste of money. Anyone know of any remedies to get a new machine from Whirlpool or of any class action suits?

Purchased Feb 2013 - worked okay until one month ago. Now stalls in the drain and spin cycle. The rotation of the drum sounds awful, makes a loud grinding noise. I tried doing the diagnostic reset of holding the Temp button in for 3 sec, release, 3 sec more but that didnt work. Also, I have noticed clothes are DRY after the Wash cycle! Managed to interrupt the wash and unlock the lid and was very disappointed. This is not a good quality piece of equipment. This seems to be a very common problem. How unfortunate.

We bought a Whirlpool dishwasher when we learned that my daughter and two children would be living with us for an extended time. We bought it a couple of months before they came. During that time I used it maybe four or five times as there are only two of us and didnt need to use it. Since they arrived in early June, the dishwasher malfunctioned almost immediately. Talking with their representative was useless and frustrating. The only words she seemed to know were circuit breaker. That is where the conversation started and ended despite my assurances that it had nothing to do with a circuit breaker. We wrangled round and round to no avail. This company used to be an American standard. Now it is a class A maker of junk.

Whirlpool Dryers: I have 2 Duet Dryers and the user interface has gone bad with both several times. I called whirlpool several times to repair. The last time, they refused to repair the dryer. I started having problems with my dryers within the first 6 months of owning them. The repair guy that they sent out the first time said this repair was a major problem with the duets but the company chooses to not acknowledge the problem. They should be required to have a recall. Never by this dryer, you will regret it!

Im yet another angry customer who is dealing with a defective Whirlpool hot water heater purchased from Lowe’s, still under warranty, and it failed. The thermocouple appears to have failed and, amazingly, the part is nonstandard in that it screws in backwards compared to every other HW heater. Lowe’s doesnt carry the part even though they sold the HW heater. When I contacted Whirlpool, they agreed the part is under warranty and will send one, but I have to pay shipping for a minimum of $10 and a week to wait, plus having to get the part installed. Obviously, I am one of many who bought this defective appliance. Whirlpool used to be a good company, but Ill tell everyone to avoid them in the future. Meanwhile, I have no hot water and its freezing in Cincinnati.

My Whirlpool Gold, Model # G16FDRXxQ06, has failed four (4) separate times. In each case I lost thousands of dollars, mostly in high-quality frozen foods. A Sears repair service representative came and repaired the refrigerator. In less than a year, after each repair, I had to call again. Three of these failures resulted in the loss of my food because the refrigerator simply stopped running. Unfortunately, I had been away from home for more than a week. One failure was caused by water leaking. This was apparently caused by a frozen pipe under the refrigerator. The repairman said that this was a routine failure for this Whirlpool model. I would like to recover my financial loss from Whirlpool. Is there a process to claim my loss? Is there a better, more reliable refrigerator?

Although stackables are a little pricey, Ive had this dryer for around 10 years and its still working just as good as the first day! Never had any repairs done on it. Great dependable dryer and washer!)$ Ive dried regular size loads in it also! A loyal appliance through and through! Thanks Whirlpool for such a great and dependable product! Whirlpool Heavy Duty-Automatic Dry Miser-End of Cycle Signal*3 Cycles.

I called the dealers repair department, which said they had not seen this before and it looks defective. I have used the oven less than a dozen times. It is virtually new. They submitted pictures to Whirlpool. The oven surround is not replaceable, so the request is to get a new oven. Whirlpool responded with, This is normal... when the cracks break through, then there is a problem. What?! I have been cooking for over 50 years and have never had this experience before. This product is under warranty. By the time it cracks through, it will be too late to do anything about it. Since when is crazing on the oven bottom natural, especially after only a very few times used? This is defective and Whirlpool is shirking their warranty. I am very dissatisfied.

Error f1e2 error. Washer less than 2 years old.

My husband and I purchased a Whirlpool Washing Machine & Dryer a year and a half ago. As of current, the machine has stopped working. The machine will turn on but will not agitate. It makes a horrible grinding noise. The type of washer we purchased was a WTW4900BW0. Whirlpool told us we should have purchased the extended warranty. But, I feel we should get more than a year and a half out of a machine that cost $650.

Just like many other reviews about this brand - our microwave went bad after only 14 months of using it. Initially the door sensor would register - it wont operate even if the door is closed. Or it will keep going even if the door is open. I contacted BBB and the Whirlpool corporation regarding this safety issue. I pointed out that the safety mechanism is faulty and they should recall all of those models that have similar issue with door sensor. This is extremely dangerous for households with kids. There is a reason why this safety mechanism is mandatory in all microwaves! Whirlpool pointed out to me that I should not try to operate microwave with open door and refused to take any responsibility. Ive owned probably 10 different microwaves over the years and NEVER had micro go bad after only one year, yet alone have completely faulty safety mechanism. Consumer beware!

Avoid Whirlpool at all cost. I have had the GSS series, which was horrible. It was declared unfixable by service after 2 weeks of ownership. It was replaced with a similar WP model WS series and was told it was basically identical to the GSS series except for some cosmetic differences (They do look identical and yes, it’s just as horrible as the GSS.). The first one was defective from day 1. It was replaced and assured the next one would be thoroughly checked out prior to delivery. Obviously, nobody did this (was still in box and never opened). The fridge arrived and had the same exact defects as the previous units. Service literally said these were junk and they had nothing but issues with them that they simply cannot fix, and issues Whirlpool is obviously aware of but will not admit to, nor back up their products. Service literally told me to avoid WP at all cost or I will have nothing but non-stop issues and non-stop service calls and the fridge will still not be fixed. I purchased the extended 5 year warranty that clearly states that the fridge will be fixed or replaced if deemed non-repairable. Mine was! Yet, neither Whirlpool nor the retailer will do anything. I was literally told Take it to the dump and go buy a new fridge by both Whirlpool and the retailer. My purchase was less than a year ago. The 3rd fridge has only been here 3 months. They took my $1,500. They took my money for the extended warranty. It has been declared non-repairable, yet Whirlpool’s and the retailer’s response is Too bad, we are keeping your money, not honoring the warranty. We don’t care if it’s non-repairable. Take it to the dump and buy a new one.This is new! The money it cost, the money for extended warranty, the money for lost food, the money for lost wages due to having to be here for repeated service calls, the huge amount of time spent using hair dryers and everything else under the sun (this fridge must be baby sat and monitored pretty much 24/7 due to more issues than I can list). The fact this fridge has taken over my life, with freezer and fridge unusable (totally unusable, it has taken over my life, but I still can’t use it and spend a fortune getting take-out food) is just shocking, but more shocking is the fact neither WP or the retailer (the blue one that starts with an L, ends with an S and competes with HD the orange store) will stand behind the product or the warranty and instead is telling me to flush multi thousands of dollars down the drain and take my new, with extended warranty, to the dump and buy a new one. Calls to both companies only led to more wasted time and frustration.I don’t even see how this can be legal. They happily took my money. They fully explained how I needed the extended warranty in case something like this happens and assured me the extended warranty would protect me in case something goes wrong for 5 full years. They will replace it with a new one if un-repairable. Yet in less than a year, Ive gotten 3 defective ones with the last one only 3 months old with the first service call made on the day after delivery, but I’m supposed to throw all this money down the drain, take my new fully warranted fridge to the dump and buy a new one?!Shocking and not something I can afford to do. If I could afford it, I would get this thing out of my house in a heartbeat and buy something else, but I’m not made of money so this is not an option. Not sure what I can do other than to warn others to avoid Whirlpool and avoid the retailer (L---s). I’m just in shock and to say I’m upset would not even come close to describing my utter disappointment and frustration with both companies and this whole ordeal (never ending nightmare is more appropriate).

We had our microwave and stove delivered in October, 2015. We had 4 deliveries of the microwave. The first two were damaged, the third needed a new fan motor and the door was not straight. They wanted to send parts to fix but we could not see spending all that money for a brand new microwave to have parts put in. I complained a lot to both Whirlpool who would not replace it and ABC Warehouse who finally agreed to replace it with a brand new one. The 4th is good. (so far).Our stove has a flaw in the glass top, the drawer doesnt close properly, and there is a piece of metal sticking out from the lower right side of the oven door. ABC says they cannot do anything about it and Whirlpool says it is under a parts warranty so it has to be repaired. I even spoke to supervisor Kimberly at Whirlpool. Got same answer. We are very angry and disappointed. As I told the Kimberly, Whirlpool got every penny they asked for. We paid for brand new in perfect condition and got a stove that needs fixing. We will never recommend Whirlpool as a Company for appliances and based on all the negative reviews Ive read, neither will a lot of other people.

We purchased a Whirlpool conquest from Lowes in 2009 and purchased a Lowes warranty. About 2 years ago we started seeing hairline cracks on most of the drawers and shelves. I complained about it last year and a lady from the Facebook page did offer 50% off new ones. Since then we have not been able to afford to get any, and today we lost our last shelf. If I wouldnt have checked it, it would have broke along with anything on the shelf. I have never seen such horrible parts. We have another small very old fridge that has help up better than this. At this point I will never buy another Whirlpool.

After 7 attempts to fix my 6-year-old Whirlpool Front Load Washer (original price $991.00) I had to trash it. Then I stupidly bought another Whirlpool Front Loader (WFW75HEFW) Feb 2017. It has not worked properly since day 1. The clothes come out dripping wet. At first I thought I was doing something wrong. I tried every cycle, limited amount of clothing and ran additional spin cycles to no avail. Finally I gave up and called for service.Whirlpool is very much aware that a number of their machines came off the line with defective spin bearings but they wont admit to it. Instead I am expected to have it repaired! It involves the entire inside of the machine being rebuilt. Its a 2 man job that will take 3-4 hours.This is totally unacceptable and it is obvious Whirlpool does not make a quality product nor do they value customer satisfaction. DO NOT UNDER ANY CIRCUMSTANCES PURCHASE A WHIRLPOOL WASHER. They are difficult to work with and I for one will never purchase or recommend any of their products. I purchased this washer from Home Depot and now my only hope is that they will honor my intention of purchasing a non-defective product. If not, I guess Im in for another miserable experience with a Whirlpool product.

Aqualift Self Cleaning - JUNK! JUNK! JUNK! The oven does NOT heat properly and it is NOT self-cleaning. Whirlpool should be ashamed of itself. We ALL need a refund. Class Action suit looming. DO NOT BUY THIS PRODUCT!

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

We bought a new side-by-side refrigerator (GSF26C5EXB00 26cf) with water and ice in the door. We have had to replace the built-in water filter every two months at $30+ per filter. This is unacceptable. We just want to know what to do to fix this problem. There is only one person who uses the ice maker, and no one uses the water in the door.

Cabrio top load HE washer - Ive only had the washer a couple of years. My husband bought it for me thinking it would make washing more time efficient and energy saving. Lesson learned! After struggling with this washer for the past year, I was told today that to repair it, it would cost around $800 or I would need to buy another washer. The washers bearings and tub need to be replaced and it will not spin properly or at all. Previously, I have owned washers for over 10 years each. This was definitely not a good purchase. After reading all of the other complaints on this site, I understand that I am not alone. It was also mentioned on one complaint of the possibility of a fire hazard with this washer. Whirlpool should be recalling.

I am a Licensed Plumber in Oklahoma, have been for 25 years. Our company will no longer work on Whirlpool water heaters, heres why. I diagnosed a water heater that the pilot would not stay lit, the thermocouple was bad. Whirlpool Tech Support told me to go to Lowes and buy the parts and send them the receipt and they would reimburse me. The customer was furious that I charged them for the part and I told them when I got reimbursed, I would send them the money. Well, I not only never got any money from Whirlpool but I never got paid from the homeowner who was mad at me and I didn’t even sell it to them. Beware, buy Rheem.

I bought a Whirlpool WFW9470 Front Loader Washing Machine 11 months ago. The washer appears to complete a wash cycle but leaves the washing wet and with no error message or light. Whirlpool says the machine is not designed for light loads. The technician says washing on a light load will damage the bearing. We had the spin bearing replaced after 8 months. But still, the washing remains wet and the bearing wears out prematurely.

I am so unhappy and frustrated with this washer by far worst washer I have ever had!! Doesn’t wash clothes clean. Sometimes I have to wash things 2-3 times and then they aren’t necessarily clean. For what I had for this pair I really got ripped off!!!

No get this and the dryer used. Top of the line. I am having fun seeing all the choices. I would recommend because of the efficiency. Measures soap and softener depending on the load size. Like a miracle.

We purchased a Whirlpool refrigerator because of the brand in August of 2011. Its December 2012, the entire door needs to be replaced. It appears the cost will be as much as the original $750 investment! We called Whirlpool expecting they would stand behind their brand after hardly 18 months, but no ... It is clearly a defective door to begin with.

I just purchased a new stove after using my old one for 15 years with the same great quality. Its the brand I will purchase when I have my retirement home built next year and leave my new one in the home for my son so he wont have to buy one for 15/20 years.

Whirlpool microwave model # gh4184xsb1 handle is falling apart. I have replaced the hood vent twice and the entire door once and now, its the same problem again. The plastic becomes brittle over a year to two years of use and falls apart. Whirlpool will only stand by their one year warranty, and is not concerned about a problem that many of its customers are having. I have read many complaints on the web about this same problem. My wife and I have decided never to purchase Whirlpool products again.

This is a good customer service (CS) review. Whirlpool knows about the defect and continues to distribute the fridge this way. We have a Whirlpool model #WRF757SDEM01 we purchased this year (2017). We love the size and the fact that the ice bin is in the door and takes up very little room. Our only complaint prior to this issue was the ice and water do not always come out gracefully. So we were happy overall till a large block of ice formed in the back of the fridge. My original call to CS was great. They did not ask me a bunch of stupid questions, just said that should not be happening and scheduled a service call.Service guy knew exactly what it was because he had repaired the same model with the same issue several times. It is a defect in the dual cooling/defrost system that Whirlpool knows about, but continues to produce. Two parts need to be replaced and one part had to be ordered. Which was not a big deal since two days were needed to thaw out the mini glacier. We lost food so I made a second call to CS and again there were no stupid questions or arguments. They got a $75 debit card in the mail to us. So I thank Whirlpools CS reps, but sure wish the manufacturing side of things were a little more diligent in production. Certainly this cost them money on all accounts.

For years, Whirlpool has had an outstanding reputation for quality, so I cannot understand why a refrigerator I have owned less than three years has to have all the shelves and bins replaced. Not the glass, just the plastic. They actually started breaking the first year. I have literally had to tape my shelves together. These are very expensive and yet they are very low quality and of course are not covered on the warranty.The plastic is not built to withstand the cold and/or weight of food products. They need to get rid of the plastic and replace it with metal. I dont want to replace them with the same low grade products. I own the model ED5JHEXTB00 serial # HRU4010107. Also, the ice maker has been replaced twice. What has happened to Whirlpool

Purchased Refrigerator (WhirlPool Refrigerator WRX988SIBM03) 16 months ago and noticed the drawer with glass that house the drawers had a crack on the right side. Couldnt believe it was cracked after such little use with just two adults living in the home. Removed it and noticed this was such shoddy design. There is a heavy metal bar in the back with a piece of flimsy plastic that attaches to the heavy metal bar with only a screw attaching the plastic to the metal.I made attempt to glue it since it was only cracked but then the plastic just started crumbling into pieces like a broken cookie. Truly there is something wrong with the quality of the product as well as the design of having this heavy metal bar attached to this flimsy plastic. The quality of this part only leads me to believe what is next with this refrigerator. I am sure there is more to come.I contacted Whirlpool to see if they would replace but of course this is at my cost. Ive had inner parts of refrigerators break over years of use and they get old and busted up over time but this is a new refrigerator and once I inspected the part, I was disappointed with myself for not removing these inner parts and inspecting prior to purchasing. I would have picked up on the poor quality right away. Taken by the outside of this unit and its beauty, and not truly looking at whether or not the shelf can hold a couple gallons of milk. I am here to tell you there is no way this would have withstood the test of time with only a gallon of milk sitting on this unit. Poor design, poor quality and metal attached to raw plastic as it is a disaster.

In 2014, we redesigned our kitchen for two side kick gorgeous looking white fridge and freezer (Fridge was $1099 & Freezer was $1099, plus extended warranty $436.19 CDN.) Within 2 years the evaporator blew. $1000 dollar repair that Whirlpool covered, yay!. BUT 3.5 years later the compressor blew...another $1000. Whirlpools response...Sorry Sears went under and the fridge is 5.5 years old. Whirlpool discontinued the model so no new fridge for us unless we re-do a whole bank of cabinets. Forewarned is forearmed. Stay away from whirlpool. There are better brands. Do your homework! Sue from Edmonton, Alberta

I bought at Lowes. The first one was sent back (doors stuck, suction cracked lining). Now the temps are not working in the fridge or freezer. All the food got dumped. Its sad. My old one lasted closer to 25 yrs. (and may I add up to ten children). This one has only been used by adults. I thought I could trust Whirlpool?! I sent info to local Lowes. We will see if theres any help.

We bought a Whirlpool Washing machine a couple of years ago. We have been having problems. It does not get the clothes clean and laundry has an odor to it. We bought it at HHGreg by the Dayton mall in Centerville, Ohio and also bought the extended warranty. It was the largest capacity machine they had in Whirlpool so I dont need to mention what we spent for this thing. We have had a service tech out 3 times. The first time he replaced a part. It still didnt fix it. So they were out two other times saying nothing was wrong with it. Not only is it not getting the clothes clean, but is putting lint pieces all over the laundry. The warranty place already said if they come out again and they cannot find out what is wrong, then we would have to pay for the service call. We then went to the store we bought the machine and talked to the manager. We got no help from him. All he did was throw us back to the warranty place. Not to mention, the family is having itching problems with their skin because the clothes are not only not getting clean but the soap is not rinsing out. In other words, we are suppose to eat this expense and move on. This is a new machine!!!!! And all it is worth is taking it to a metal place to scrap out!!!!! We will never buy another Whirlpool product again. It is really **. They don’t back their products up and do the consumer right. There are a lot of complaints online about the same identical thing I am writing about. They should reimburse the people the money that they wasted. Thank you.

We have the four-door model, french fridge part, drawer, and bottom freezer. Overall has been a good appliance. Icemaker burned out in third year. Icemaker replacement is very noisy, popping and groaning during drop-out and refill. Noise level otherwise is average.

Bought a Whirlpool French door refrigerator in March 2014 and have had to have it serviced 4 times now - all for the same issue. We get frost in the refrigerator (not the freezer, the refrigerator). The same parts keep being replaced but they are all defective. This last time the service tech said he contacted Whirlpool and they had a redesigned part that should take care of it. Within 3 days of the new part being installed the frost is back. The other issue is the loud noise of the compressor. We have had multiple Whirlpool products through the years, but this is the last.

LED Freezer Lamp stopped after eight months, $14, not covered under warranty. OEM water filters are costly. Icemaker is noisy, ice dispenser chute clogs. When refrigerator was set at 38-40 degrees the eggs and most top and middle shelf items partially froze. Noisy compressor. Good price from Home Depot sale in Nov. 2019.

I purchased a Whirlpool Cabrio washer in 2007 and had to replace the control panel for $300 each time twice.

Just like hundreds (maybe thousands?) of others who have had the same part failure causing the refrigerator to leak, I had it and was told by my very honest, highly reputable repairman (not the one KA recommended!) that it was a DEFECT. I bought a French Door style #4609730. First, I complained on Twitter and the Social Media folks gave me the runaround. I kept it up and then, filed a complain with the Better Biz Bureau. They sent the complaint to Whirlpool, who owns KA. They gave me the runaround too - UNTIL I TOLD THEM HOW MY LOCAL TV NEWS station was interested in my story (true, I went to them too). CORPORATIONS SHOULD NOT GET AWAY WITH DIRTY BIZ TACTICS!

I thought the new AquaLift cleaning would be the greatest. Boy, was I disappointed -- no thoroughly disgusted and very angry -- when I tried to use the self cleaning oven. I had cooked a prime rib roast and a lot of grease had spattered inside the oven. I wiped away the excess and did a cleaning cycle -- what a joke! There was still grease running down the door and walls. Nothing was changed after two cleaning cycles. Now I have to crawl inside the oven and scrub it manually. I was always pleased with the old self cleaning ovens which only left some ash and a little bit to clean up. The AquaLift technology doesnt work at all, didnt Whirlpool test it prior to selling it to the public? They will surely lose my business and I hope a lot of other peoples business as well. This technology was a huge mistake!!

AquaLift Self-cleaning does not do the job as advertised. It does very little to clean the oven. Sitting-on-the-floor-in-front-of-the-oven scrubbing is what is needed to clean the oven.