Cannot reinstall oven door after glass cleaning. The worst design and absolutely no support from Whirpool. They said the instructions are in the Manual. NOT TRUE!!!. The person on their helpline said she did herself. It is simple.. Total BS. Here is the link to hope to maybe get it fixed: ** Worst stove ever.

Please DO NOT purchase an appliance with Whirlpool. I have had my double oven WiFi for 7 months. It has worked great. They did a update on it and I have had an hour glass for 2 1/2 weeks but the crazy part was they sent me a part, had it expedited 2 day shipping on a Friday and I didn’t get till Thursday of the next week. Go figure. So they send a new part and guess what? It’s broken and my oven doesn’t work once again. The other part is they have to wait for the code on the error 3-5 days. One we are going on week 3 with no oven and at this point I call and tell them my husband can run to Lowe’s and take a control panel off a new stove and put it on or better yet something is wrong with this oven. I need another oven because at this point I’m extremely pissed. Please DO NOT buy any products with this company. They SUCK!!!! They should replace it and pay me for all the meals I have had to buy.

After only 14 months of light use, the magnetron in my over-the-range Whirlpool stainless steel microwave failed. The cost to repair was $350. I paid $450 for the whole unit upon purchase. I wrote to Whirlpool with documentation and got a voicemail that they were sorry, but the 12-month warranty had expired. The independent repair person said it is the Korean manufacturer of the magnetron that is the problem. He is replacing units all over town on all kinds of models Whirlpool is involved with, including KitchenAid. Whirlpool needs to get their money back from Korea! I will never buy another Whirlpool product and have told them so.

Just bought this washer, its making a lot of noise, sounds like something is grinding (metal, gears, etc). I thought Whirlpool was suppose to be good. I just had my Maytag go out after 18 years of service, thought about getting another Maytag but found out Whirlpool makes those. As many complaint as I see, seems there needs to be a class action lawsuit against Whirlpool for shoddy work.

I have recently installed a Whirlpool water heater and was thankfully home when I heard a pop sound and my water heater had exploded inside. The heating element also caught fire. I called customer service and was not satisfied with the response from their customer service team.

I have a model ED20PK. The doors are rusting on the outside.This refrigerator was purchased by my husband who has passed, I do not have the receipt and I dont know where he purchased it. The refrigerator worked perfect. It has been in my kitchen from day of purchase. My home is adequately heated in winter and air conditioned in the summer. I have an up-scale home. I dont see any reason to replace the refrigerator, but I cannot stand the deteriorating condition of the doors.If I replace it, I will not buy a Whirlpool or any brand made by Whirlpool.The rust is not just a discoloration, it is actually rough to the touch and is getting worse day by day. If you have any answers or help I would appreciate a phone call. I am not really in an economic position to just go and buy a new refrigerator.

I bought my Whirlpool range in 2009. Good thing I bought an extra warranty because since then, my oven has stopped working about 5 or 6 times. When I turn the oven on, it does the clicking sound, it starts up then it turns off and sometimes it doesnt even turn on. In 2010, I had my turkey ready for the oven at Thanksgiving. I turned on the oven and nothing. I had to cut the turkey and deep fry it. In 2011, same time on Thanksgiving and now Ive been waiting for 2 weeks for the part. I have 4 kids. I need an oven. I cant take this anymore. Also, out of the blue, sometimes the stove top starts clicking on its own and it scares the hell out of us. I have to unplug the stove. Help.

Re: wdf7payw6. I purchased this unit last February. It has never washed properly. In the last month 2 separate warranty service reps have been out. The first one told me that I have not been doing a good enough job of prewashing the dishes so the arms were clogged. While cleaning them, he broke the top arm. When he came back to replace the top arm, he added that the dishes were not drying because I didnt use enough jet dry so I would have to dry by hand, and that the arms were clogging because I didnt prewash well enough. I told him to leave and never come back. I called customer service and they sent out a new company.The rep today told me that even on time delay or overnight settings I must run the hot water prior to starting the unit. And that since the water wasnt hot enough; the undissolved detergent was clogging the spray arms. This was confirmed by your phone support person who told me that for best results thats what I had to do. The result I want is for the thing to wash dishes. It doesnt do that. The current rep ordered a heater, motor pump and spray arms. My previous dishwasher operated perfectly (until the pump failed) for the 18 years I have lived in this house plus however long it was here before I moved in. I will never buy a Whirlpool product or anything built by subsidiaries or parent AGAIN.

We have had our Cabrio for one year now and we found the agitation cycle to be loud but we have gotten used to it now. The thing we cannot get used to is the sour smell permeating from it. It smells like a dirty mop. Our washer and dryer are in a small laundry room so when we enter it to get to the garage or bathroom, the smell hits you like a ton of bricks. Stinky!!

On 11-29-2014 we were washing our laundry and our whirlpool washing machine started making a really loud noise so I went to investigate the problem. I open the bottom part of the washer to find out that the whole cement block to balance the drum was on the floor of the washer so I called the 1800 number on the machine and no one at whirlpool corporation wanted to even help. No one said sorry. No one said Let me see if I can help. No one. Every one I talked to they cant help at all. No one apologized once about the poor product that whirlpool sells and the defect that their products has. My washer is one year and one month old. So I can say truly with confidence that whirlpool product are the worst in the world plus their customer service even more. It is very sad after we paid all kind of money for our washer now I have to buy another one after one year and one month. Very bad customer service.

I purchased a 50 Gal. Whirlpool gas water heater on Saturday, 12/31 to replace a 20-yr old unit that had failed. The unit was installed that day and it started right up but I noticed the burner had gone out about an hour later and the status light indicated FV Sensor Lockout. I tried calling Whirlpool but their customer service was closed. I tried troubleshooting myself using manuals and Internet forums without success. Everything I could find indicated that an FV Sensor failure could not be repaired and would require replacement parts. I called Lowes and was told they could not help me and I would need to talk to Whirlpool.I called Whirlpool again Sunday, 1/1, but they were closed again for the Holiday. I called two plumbers and both told me that the Whirlpool units were problematic and that if they did come out, there would be little they could do except charge me a lot of money and recommend parts to order as Whirlpool does not let them stock parts. Both plumbers also suggested that I consider buying another brand.So I went to Home Depot and purchased another brand with similar specs. I installed it that day and it fired up right away and has been running fine ever since.I talked to Whirlpool on Monday, 1/2, and they told me they would not issue an RMA for a unit that they considered usable. They also told me there was an FV Sensor reset procedure that they would have walked me through had I been able to talk to them that would have bypassed the sensor until a replacement could be installed. I told them that if they would publish this procedure in their manuals or on the Internet, I would have certainly done that. Im now fighting with both Whirlpool and Lowes to get a resolution to this problem. Im not sure about other Whirlpool products but their Water heaters seem to be very problematic.

Have to keep coins collecting in pump and ruins pump or starts leaking. I feel there is another way it could be solved. I spent enough for this washer. Now I fix that. Now it leaks on discharge hose. Hard to stop it. Like old washer worked lot better all round. Never had that trouble. 4yrs old 1,200.00 plus cost sending somebody out to fix it. Crazy! This happen more than one time with this machine. Thank you.

I am very upset with this company. I bought my fridge two months ago from Sears. The fridge is leaking water and Im having a lot of problems with the freezer and the ice maker isnt working at all. Ive been trying to reach the company but they always leave me hanging in the phone and never answer and keep hanging up. I am very upset with this company. I wasted a lot of money for nothing. Please people dont buy fridges from Whirlpool and dont waste your money.

The repair technician just left telling us that our Whirlpool Cabrio washing machine is fine. It is a little over a year old, makes LOUD noises as it runs, doesnt get the clothes clean and often doesnt even get them wet. The clothing sits above the water and comes out with pet hair, soap and dry spots. We use it the way the manual directs but it seems to be a totally defective machine. We sure wouldnt sell it to anyone nor give it away to some poor unsuspecting soul. Guess it needs to go to the dump. Shame on you Whirlpool for taking advantage of so many of us.

I bought my Whirlpool 50-gallon gas water heater from Lowe’s 10 years ago. After the first year, it was nothing but problem. The thermocouple was replaced so many times and there’s the inconvenience of not having hot water. Customer service sucks and they continue to send you to Lowe’s to pick up the part for free. I have 2 more years on the warranty and Im replacing it after its over! 3 days ago my water heater stopped working and now again I will replace the thermocouple. Dont buy Whirlpool products: they are junk!

I purchased a new Whirlpool Cabrio washer 3 years ago. It is the worst washer I have ever owned. During the first year it had to be repaired. It continuously flashes F51 when I try to wash a load of towels or bedding. I am beyond fed up with this machine and will NEVER purchase another Whirlpool product. If you are considering purchasing one of these I would tell you not to waste your money.

I bought a Whirlpool model # WRF757SDEM. It has failed twice in 7 months. The tops temperature hovers at 54 degrees Fahrenheit. The freezer works fine. I had a whirlpool fridge for 10 years before I bought this one and never had trouble with it. This particular model seems to have a design flaws according to other reviews I saw on this site that read similar to mine. We are waiting on parts. This is the second time in 6-7 weeks that it breaks down.

Whirlpool Cabrio Washer and Dryer - The washer does not stay balanced even with a very small load (even though advertised can wash King size comforter). Even with a light load, we have to put the dryer on Heavy Duty or Bulky...and usually have to dry a second time. When attempted to contact Whirlpool, no help available. WORST PRODUCT I HAVE EVER PURCHASED... Would not even want to GIVE this set to a friend or family member. DO NOT PURCHASE THIS PRODUCT.

Just had the repairman at my house to repair my 2-year-old Whirlpool refrigerator Model GB2F4DXWS07 - he couldnt fix it. Just throw it away and get a new one. There is a blockage somewhere in the line, he suspects the lines were not cleaned before it was charged at the factory. Repairman said it was a typical 20-year-old refrigerator problem. Customer service was no help - Whirlpool live chat is currently unavailable. Lousy product with worse service. I will never buy another Whirlpool product.

I purchased the GBS309PVS single oven in Dec. 09 along with a Whirlpool Gold microwave, dishwasher, and stove top. The oven was dented and scratched, so another one was delivered on 1/10/10. I finally decided to use the cleaning cycle in Oct. 10. It burned out the circuit board and something else. It was under warranty and repaired. I was afraid to use it again, but tried it yesterday, 12/27/2011. It smelled horrible, knocked the power out of the oven, and the door will not unlock. Customer service was not very kind and said that I had to purchase a $269 warranty and they would send someone out. I did, unwillingly. Well see what happens on Friday. If this is not resolved, I will go further. This is a faulty part of the manufacturing and should be handled as so.

Takes 2 or 3 full cycles to dry small load. Big disappointment, drying is such a horrible experience since the clothes never dry when I expect them to. Not satisfied at all.

I purchased a range top from Lowes and a month and half my burners go out. I call Whirlpool and a service technician came out. Said that he cant repair the stove because a bug had burned out the burners and he cant repair the stove. I call Whirlpool and they told me that voids my warranty with them even though my stove is not even two months old that will not repair it and I will have to pay for it to be repaired. I asked Lowes and they told me that they only take back big appliances back before 30 days. Now I am stuck with a stove that I paid 700.00 for that does not work and I have 4 children to feed. I am sickened on how Whirlpool can do this to a hard working family that just wants a good stove. I hope this helps another hard working family. Do your research before buying from Whirlpool. I wish I would have.

Purchased an expensive, Cabriolet Washer in 2014 to replace a well used Kenmore washer. Sucked into the, Whirlpool is a good brand and spent more than I would have. Lid lock fault started about 3 months ago, googled fix and found this to be a very common problem with this brand. Have been able to override and reset it but it is very frustrating to deal with. Called in a repair person this morning who, for $140 told us we had a faulty lid lock and for $360 he would replace it. I contacted Whirlpool and asked if they were aware of this very common complaint (just google it) and they were not but offered to make a record of mine. Please do not buy Whirlpool. Very disappointed with their product and their response.

I bought Whirlpool hot water heater with the Honeywell part in 2014 and the thermal box went out. No flashing lights, no way to reset. I understand that Whirlpool had a class action lawsuit after researching. Still selling this product to consumers. Whirlpool should be held responsible, and be made to give an allotment to replace homeowners with hot water tank of choice! If lawsuit is active please add my name.

In November 2014, I purchased a Whirlpool 22 cu ft side by side refrigerator from my local appliance store. During that short time, there have been 4 instances where the ice clumps together and gets stuck, causing a large amount of ice to dump inside the freezer door. When the door is opened, the ice falls out onto the floor. I usually spend 10 minutes picking up ice and wiping up my kitchen floor. I have had the local store repairman over. He told me that was normal. Two things are seriously wrong with that statement. When I spend 1600.00 for a brand new appliance, I should be able to depend on the fact that it will function in at least a somewhat acceptable manner. Additionally, that statement by the repairman convinced me that he was not really interested in fixing the problem. I really dont think the normal operation of a new appliance is for it to make frequent, large messes for the owner to clean up. This appliance is junk and you would be foolish to purchase it. Spend a bit more money and buy a Samsung or LG. Save yourself the frustration and sense that you have been cheated and deceived by Whirlpool. I will never buy this brand again.

I have a lower end 4 burner model but I love it. Both power burns are in the front (I would change that) and electronic ignition. The oven temp is true and heats up quickly, I bake upwards of 700 cookies at Christmas time. Even being a lower end model it works great and I use it everyday. I think it is more energy efficient than the model that I replaced, which I replaced in order to have the electronic ignition. I would recommend this Whirlpool Range!

Our over the range Whirlpool microwave door casing is disintegrating where the door handle screws to the door. Big chunk fell off today.

This Whirlpool washing machine is over 5 years old and very reliable, I use it several times a week and have had no problems with it. Next time I will purchase a larger capacity machine so I can wash comforters and spreads easier.

Good microwave and will have 1100 watts Of use for TV dinners and warm up food. Do well and goes well. Please use this as well to warm up TV dinners smaller than most. Test them and see what is best. Go.

I have the Whirlpool Gold microwave model GMH3204XVQ-1 manufactured in May of 2010. The plastic around the lower door handle is cracking (currently in 4 directions from the handle) and the plastic on the side of the control panel is cracking in the center area and lower side. Neither of these area experience abnormal stress in day-to-day use. Unfortunately I could not get a good photo of the other crack on the lower corner of the control panel but included the one on the side in the middle. I contacted Whirlpool customer support about 1-2 months ago and to date, have not received any type of response or concern from them about this issue.

I purchased this washer from Lowes 5 months ago. I did not purchase a store warranty. Started having problems 60 days later. I have to deal with a Whirlpool rep. The company is 150 miles away. They have been to my home 3 times to resolve the issue. They replaced an air trap. The problem... my clothes still wont spin dry!!!

I purchased a Whirlpool 3 years ago. It was on the lower end for price so my expectations were not that high. It does an average job cleaning dishes so for the price I could give it 4/5. The pump and motor just went and had to be replaced. Almost the same cost as replacing the whole machine. The repair technician that did the work stated that this was a very common problem with Whirlpool in recent years. Of course this is not covered by warranty. So if you purchase a Whirlpool realize you are rolling the dice.

Purchased Refrigerator (WhirlPool Refrigerator WRX988SIBM03) 16 months ago and noticed the drawer with glass that house the drawers had a crack on the right side. Couldnt believe it was cracked after such little use with just two adults living in the home. Removed it and noticed this was such shoddy design. There is a heavy metal bar in the back with a piece of flimsy plastic that attaches to the heavy metal bar with only a screw attaching the plastic to the metal.I made attempt to glue it since it was only cracked but then the plastic just started crumbling into pieces like a broken cookie. Truly there is something wrong with the quality of the product as well as the design of having this heavy metal bar attached to this flimsy plastic. The quality of this part only leads me to believe what is next with this refrigerator. I am sure there is more to come.I contacted Whirlpool to see if they would replace but of course this is at my cost. Ive had inner parts of refrigerators break over years of use and they get old and busted up over time but this is a new refrigerator and once I inspected the part, I was disappointed with myself for not removing these inner parts and inspecting prior to purchasing. I would have picked up on the poor quality right away. Taken by the outside of this unit and its beauty, and not truly looking at whether or not the shelf can hold a couple gallons of milk. I am here to tell you there is no way this would have withstood the test of time with only a gallon of milk sitting on this unit. Poor design, poor quality and metal attached to raw plastic as it is a disaster.

I bought my 50 gallon gas water heater in December 2015. When kicks on it rumbling. I called warranty and they said We will send tech out but I will have pay the labor. Why do I want pay for a tech if the quality issue is the water heater. Need pay $180 for person come out say its defective. No sense to me. Then when they tell me need new water heater pay them for install. You can check my accounts I used to shop Lowes and will no longer do it because of this service.

I have had a Whirlpool hot water tank now for about 7 years and all I have had out of it is trouble. It wasnt even a year old and I was putting a thermocouple in it a few months later I put another one in it. All I do is put thermocouples in it. I have saved the old ones. This heater is a piece of junk and I am the one whos paying the price for it. I just put a thermocouple in it on January 9, 2012 and I am putting another one in it on January 15, 2012. I have replaced all parts and it still does it. They are going to buy me a new one someday. I’m tired of this. This should not be happening. They are ripping people off. If the pilot light does not light, you have to replace the thermocouple in it.

Every one of the knobs cracked where they engage the gas valve. One gas valve came loose from the manifold creating a gas leak discovered by the propane company on a system leak test. Screws came loose that hold the tracks to the base for the slide out bottom drawer. The AquaLift cleaning system is useless. Better buy some oven cleaner and rubber gloves. Very disappointed! One star because 0 isn’t an option.

I purchased a new gas water heater and had it installed by a plumber. It worked for 3 weeks then we lost hot water. I called the 877 number and got shoveled around to 3 or 4 people. I got hung up on twice then spent 45 minutes repeating all the instructions that are on the tank to relight the pilot light. They agreed to send a new valve. The first time, I never received the valve (after 10 days) and had to call back. The second time I called in, I spent 20 minutes trying to get another valve sent. The valve I, finally, received had plumbers dope on the back and clearly was previously used. Had the original plumber replace the faulty valve? And lo and behold, the second valve didnt work either. I have no idea why a gas water heater would have any issues after 3 weeks. I bought it brand new from Lowe’s. It is obvious that Whirlpool makes shoddy products. They have very poor customer service and care little for the customers’ time either in correcting the problem or being without hot water. I have spent over 2 hours with Whirlpool. Only to 3 weeks after the initial call, I still do not have hot water from a heater that is less than 2 months old! I called them on the issue of the second valve not working and they put me on hold (after 10 minutes the line went dead and I was disconnected) despite the fact I asked them not to do that!

I purchased this Maytag clothes washer in 2007. So far Ive had to purchase and replace the front door 2 times. The current one now needs replacing. The plastic near the hinges disintegrates after about 2 years. This appears to be a manufacturing design defect. I have requested from Whirlpool to send me a replacement door for my washer. The part number is 34001178. The model number is MAH2400AWW. The Serial number is 14060452LE.I have spoke to four different levels of employees at Whirlpool after escalating the service request. Each time they have told me they are unable to send a replacement door to me, stating that the product is out of warranty. I realize that the washer is out of warranty but I believe this problem is a design flaw. The plastic near the top door hinge breaks down and cracks after 2 years of normal use. The last person I spoke with Michael (would not provide me with a last name) said to write to the Whirlpool corporate office with my complaint.

This aqua clean is garbage. Had Whirlpool with heat clean perfect. Now have to clean my oven with self cleaning over easy off. I am so disappointed. I always thought of Whirlpool as a good choice. And have bought Whirlpool before. But not after this. Bad, real bad.

On the 27th March 2012 I bought a new Whirlpool 6th Sense washing machine S/N 411048002028 AWOE 9210 - 30 9Kg for E499.00. I brought it home and plumbed it adding in a lime filter on the water line to protect it from limescale. On the 14th September 2016 a service technician replaced the entire drum as the old one made so much noise and the ball bearings are part of the drum. On the 7th June 2013 a technician replaced the drive belt claiming that it moved if a light load was put into the machine. On the same day I added an extension of 3 years Guarantee at Euro 89.00. On the 14th October 2013 a technician examined the machine for a water leak but found nothing and charged me for the call. Out E25.00. I lived with the noise of the spin cycle ever since. The noise got steadily worse until 27th September 2016 when the machine finally packed in. I stripped the machine down to find the ball bearings on the drum completely rusted over so the drum was rotating without the cushioning. On the same day I bought a Bosch machine and decided to forget about the extra guarantee as the offending parts had already been replaced once and did not even last 4 years. I will bring it to the recycling yard later today as that is all it is good for. It was bought in Media World, Orio Center, Bergamo. It was paid for by Gianni ** who is my father-in-law and had a loyalty card for the shop.

I purchased this washer two months ago and have been greatly disappointed with it. I put in a large load on wash cycle, but the rinse cycle is barely any water, and is all soapy water, so then I have to turn it back to wash cycle to get more water and then back to rinse to finish it properly. I was never told about the short water cycle, why not? It is still under warranty, but said I have to deal with Whirlpool, and all they can do is send a repairman out and if it is not a defect, it will cost me $130.00 for the service.

Purchased this washer 7 months ago. We are a family of 5 with A LOT OF LAUNDRY!!! I adequately researched a machine that could do large loads of laundry, WELL. I read at least 100 reviews and went forth. (Note to self that anyone giving this machine a decent rating, is a DIRTY, SMELLY, FILTHY LINEN WEARING FOOL who doesnt take much pride in their clothing cleanliness.) I proceeded onward and after paying A LOT OF MONEY for this 4.8 Whirlpool Cabrio Washer, I found out within the first two days of owning it, that IT IS GARBAGE! Regardless of the 4.8 drum size, you can only fill it less than 1/4 of the way with clothes, to even hope they will be touched by water. My clothes come out DETERGENT STAINED & DRY! Insanity... A washer that doesnt wet the clothes!!! We have had 4 repairmen come out within this time, because I am fed up! I have been physically shown and told now, by all 4 guys, that the washer will not fill more than 9 inches with water. They advised me to fill Home Depot buckets and throw them into the drum. THIS IS WHAT I DO, TO SATISFY THAT I AM WETTING MY LAUNDRY - PURE CRAZINESS! The repairmen told me to set all loads to bulky sheets + extra rinse + highest soil. This is a 1 hour, 26 minute initial setting. Note that my adding water messes up the computer readings and it will reset throughout the washing cycle multiple times. Even with all of this... the machine still doesnt wet the clothes!! The top and center of the load is BONE DRY! This machine will not wash sheets, blankets or comforters, either. Dont waste your time trying!!! Dont be fooled by the drum size. Your great grandmothers 1930s 1.6 cu ft washer washed more clothes in any given load. #1 My water bill is through the roof. #2 The washer constantly resets and runs on any single load for over 2.5 hours AND #3 MY LAUNDRY PILES HIGHER AND HIGHER, as you cannot put more than a smattering of clothes in the machine, at any given time! GARBAGE, GARBAGE and MORE GARBAGE!!! I would be better served to find a stream and a flat rock and start doing my laundry colonial day style! I am done... Finally had enough of this insanity! RETURNED THE MACHINE THIS MORNING!!!

I purchased the Whirlpool Cabrio Washer WT5500XW2 from Lowes on 9/12/2012, which turned out to be the worst purchase of my life. It did ok for over a year. It had always been noisy. Now it sounds like a jet airplane when it is on the spin cycle. This machine is not yet 2 years old. Do not buy a whirlpool washer. They are Junk. Plan on getting rid of this piece of junk and buying a new washer. Dont waste your money on Whirlpool!

My mother bought these two years ago along with a washing machine and fridge. And now they are falling apart. The dishwasher wouldnt clean the dishes so my mother called the warranty people. It took a week to have someone come out and say it was fixed. The very first load it wouldnt clean the dishes. Now it takes another week to have someone to come out and say they need to order a part. Once the part gets here two weeks later it took 6 hours to fix. They replace the whole bottom half of the dishwasher, could have easily replaced the whole unit. Now a week later the clothes dryer doesnt turn on.

Whirlpool Electric Convection Range - We purchased a Whirlpool fridge, range and microwave, I am finally sending my review after another of many frustrations with the AquaLift self cleaning oven. NEVER, NEVER buy one unless you love cleaning your oven. The temperature goes to 160 for 40 minutes, it does nothing to clean your oven. I called the co. we bought it from. The fellow said, Oh you should clean your oven weekly, really there are 2 of us and I use the oven maybe 2-3 times a week without spillovers. When I do have spillovers I use the AquaLift waste of time, then have to spray it down with Affresh Spray the co. I bought the range from recommended, still have to scrub hard to remove built on spills. Save yourself the money and frustration. Buy anything but a range with AquaLift self cleaning.

Refrigerator stopped cooling... Paid $200 to have it diagnosed... Cost more than a new refrigerator to get fixed...$14,000. Refrigerator was 7 years old, energy star. How can it be energy efficient if it was made to last only seven years? How much energy is wasted making new ones to replace the broken ones, that cost too much to fix. Energy star. What a scam.

I purchased Whirlpool top loading washing machine model # WTW57ESVW less than 2 years ago. It stopped working yesterday. I had a trusted professional repairman evaluate it today. The motor needs to be replaced after less than 2 years?! The customer service reps basically said sorry. I should have purchased the extended warranty. Is it not reasonable to trust that a Whirlpool washing machine motor should last more than 2 years.I am very unhappy and very angry that Whirlpool will not stand behind their product. The last customer service rep I spoke to suggested she could send one of their repairmen and replace the motor at a cost to me of $299.00. So, after less than 2 years, I am offered an amount to pay of about half the cost I paid less than 2 years ago for the brand new washing machine. My home is full of Whirlpool appliances. I have been a good and loyal customer for over 30 years. I am very angry and upset with Whirlpool. Please explain to me why it is not reasonable for me to trust and believe that a Whirlpool top loading machine that is well cared for and not abused in any fashion should last longer than 2 years? Is this being a loyal Whirlpool customer gets you, I should have purchased the extended warranty”? We are talking about a motor here, not a fabric or bleach dispenser that breaks. Although, those parts should not break either, there is a big difference from something like that and a motor. Please contact me as soon as possible at either number listed above. Thank you.

I purchased a Cabrio top-loading high efficiency low water washer thinking I was doing something for the environment by saving on water and electricity. After about a month, I noticed that my clothes especially those with stretchable fabric were getting larger. My husband kept telling me I was imagining it. Then the clothes would get all tangled especially the pants with ties on the waistband. At the end of the cycle, the clothes are stuck on the sides of the washer and I have to pull them apart. Even after drying, I have to iron everything even my pillowcases which look like they have shrunk they are so wrinkled. I recently bought some 100% cotton outfits and they are even more wrinkled and are starting to lose their shape. I am now noticing that the stains on the clothing are not coming out even when I use a spot remover and put them through a second time.Now I started to notice an odor coming from the machine and my towels and wash clothes have a sour smell. I paid $600 for this machine and after reading the reviews, I just want to replace it. I am now waiting for it to break down. My husband kept insisting I must be doing something wrong. When it goes into the spin cycle, it bounces all around and I have to push it back in place when it is done. I do not think the clothes are getting rinsed enough so now I put them through a second rinse and always put it on low spin. It doesnt see to matter, it sounds like a rocket ready to take off. Is it even worth it to go back to Lowes where I buy all my appliances?

I owned a Kenmore washer for approx. 20 yrs that endured 6 kids for most of that time period. When time came for a new one, I had to have the latest model, and settled on a Maytag Bravos approx 3 yrs ago. This was a huge mistake - I paid between 600-800 for this machine, and it is a piece of garbage. The repairmen here yesterday explained to me that Maytag and Whirlpool are now the same company, and also that all these machines are now made overseas because of cheap labor. In a nutshell, I was given an estimate of at least 300 to repair this piece of crap - he explained that they are only made to last a few yrs -where is the justice in this situation? I really dont get how these big companies get away with selling crap, knowing all the while that the consumer is getting screwed - yet people continue to buy them..

I bought the Whirlpool Cabrio 5.3 cubic foot washing machine to replace a Samsung equivalent machine. I am so extremely disappointed with it. As a mother of nine (seven of them boys) I need a quality machine. Unfortunately this is not one. The clothes come out of the machine just as dirty as they went in. The pants still have dirt on the knees. I think a rinse in the sink would yield better results. I use the highest soil setting, warmest water fabric will allow, and exclusively Tide detergent. I only fill the tub with half a load (completely voiding the value of large capacity) and yet still have to run clothes through twice.I really don’t have time for this. All the kids clothes have to be inspected before drying. I wish I could go back in time and keep my Samsung which was recalled. I would rather take the risk of an exploding machine than deal with this one any longer. Unfortunately, after spending over $1000 on the washer (and buying the matching dryer) I’m stuck with this useless machine. I hope others don’t make the same mistake I did.

Here in Brazil, we use to have a very good brand of durable and reliable refrigerators and home appliances called Brastemp, and I was a very happy, fidelized customer of theirs. The time came for me to move to my new house. I gave my old appliances away to friends and modeled my new kitchen with Brastemp products. What I didnt know then is that Whirlpool bought the brand in 2000 and was selling their appliances over the Brastemp brand since.Whirlpool is clearly selling disposable appliances here. My vacuum cleaner failed after a week. My brand new refrigerator and laundry machines failed weeks after the one-year warranty and the dishwasher sometimes heats up and tips the 20A circuit breaker (suggested by the manufacturer), which is only for the dishwasher. For my complete surprise, my old appliances are still functional in my friends house. I got my old dishwasher back and I had absolutely no problems since.The vacuum cleaner failed again, this time 5 months out of warranty. In all fail cases, the price to fix it was about 70% of the price of a new one, which I took as a sign to replace them for something else. Good job, Whirlpool! You bought a nice brand, trashed it and gave the finger to fidelized customers you acquired with the new brand by replacing quality products with built-in obsolescence others. What do you plan to do next? Whatever it is, dont count on me as a customer ever again.

I was excited to have an energy efficient washing machine and chose the Whirlpool Cabrio top loader. I truly wish I had read reviews rather than trust the salespersons advice. It does not clean clothes properly at all. They come out smelling dirty and are covered in white goo, even when the machine has just been cleaned. Stains never come out despite all of my efforts. Now I have water leaking out of the bottom as it fills. Not impressed at all. What a giant waste of money.

Cabrio Washing Machine - I purchased my washer and dryer in May of 2008. I had problems with sheets, towels and pants getting very twisted and tangled, but I just attributed that to a design flaw. My problems really began in January 2013 when loads were not level all the time. It didnt matter if it were 1 shirt or a load of towels; you had to stand by the machine and it took forever to finish a cycle.On 1/11/13, the first repair was the rods that kept the drum stable. $260.82 later, it worked again. On 2/16/13, the washer quit working. On 2/18/13, the repairman was back out. It needed a lid lock switch. It was $87.14 that time and he would be back when the part arrives ... There was still no washing machine. On 2/21/13, he returned with the lid switch and replaced it. That was $178.04 but wait, there were still other error codes so there was no working machine.I refuse to pay anymore as I now fear I will be buying a new machine after spending over $500 in less than 6 weeks, but Whirlpool did the right thing when I called and they agreed to repair the machine. They wanted a different company to come diagnose the problem (the machine gave an F50 and F51 error code to the repairman here on the 21st), so I have to wait for another repairman to come and look at the same codes flashing on the LED readout.On 3/1/13, the A&E repairman that Whirlpool sent out arrived at my house. I have been without a washer since the 16th of February. He diagnosed the problem and said that it is a $1,000 repair! I called Whirlpool and asked for a new machine, instead of throwing more money at this one. They informed me that if I didnt like their offer, they wont do anything then. I agreed to the repair.Parts started arriving at my house. On 3/13/13, another A&E repairman came out and started to fix the machine. He informed me that there was more wrong than the first guy thought, but he had the circuit boards so he would get it going. On 3/24/13, the washer quit working again and was flashing an F51 error code. This is the biggest piece of junk I have owned in my life. I have missed 5 half days of work since January and there is no end in sight. Why is Whirlpool allowed to get away with such an inferior machine?

March 1, 2016 I purchased a new Whirlpool dishwasher model WDF320PADW2. After just over 1 year of use, the unit quit. The pump only runs in the empty direction. It quit in the wash direction. Hums and smokes. This is not acceptable for a appliance to last just one month past warranty then totally quit.

We bought our washer (Whirlpool Cabrio) from a rent to own company about 2 years ago, and finally got it paid off. About a week ago, the lid started sticking when it was done washing. I went to open it last night to start some laundry, and it BROKE. Now theres a piece stuck in the bottom part of the lock, and the washer wont start. Anyone else have this issue?

We purchased this refrigerator towards the end of 2008. The entire interior of the refrigerator is imploding. The plastic Whirlpool used to frame the glass shelves is cracking and shards are falling off. There are 3 drawers; one has already fallen because the plastic sliders the drawer moves along has disintegrated. We noticed the small hairline cracks appearing some time ago but never thought they would go to this extreme. Apparently the plastic used cannot stand up to cold temperatures.I contacted Whirlpools chat and was told that the product is out of warranty and I need to place a service call to get new parts. I proceeded to email the CEO of Whirlpool, Mr. Fettig because I dont believe I should have to pay for a service call when its a manufacturing problem. I received a call the day after and was told the same thing; that they are sorry we are experiencing a problem but the warranty only covers the first year. I was told that if there was a problem with the plastic being inferior that they should have cracked in the first year. I responded that the cracks may have been occurring early on in the back of the refrigerator which is the coldest part but were noticeable.Its very frustrating because a refrigerator purchase is expensive and not something that I planned on doing a mere 5 years later. I believe that Whirlpool at the very least could have shown goodwill towards their customers and given at least some discount on the replacement parts or at the very least a certificate with an amount off toward the purchase of a new refrigerator. Its a win-win situation for everyone because the customer is still happy with their Whirlpool refrigerator and/or it guarantees repeat business for Whirlpool. Apparently Whirlpool doesnt care about keeping customers happy and want and/or need repeat business. Its the last Whirlpool I will ever purchase!!!

Called 8/24/15 - spoke with representative about our two year old washer. Nothing Whirlpool can or will do.They have no other complaints about rust inside the lid and inside rim at bleach dispenser nor chipping of paint from lid. When asking the Whirlpool representative about the rust, he assured us there were no other complaints.This is hard to believe since our recent research clearly shows that other brands have had to replace tops due to rust. As for clothes not cleaning, no response to this issue. Whirlpool has not trained salespersons and therefore at the mercy of Lowes hard sales tactics and we were very delinquent in researching numerous complaints before purchasing Whirlpool Cabrio Platinum Model WTW8240YWD - Ranked lowest possible from ConsumerAffairs with hundreds of complaints. Whirlpool should be ashamed of product - clothes do not come clean, there is no soak cycle, no way to open mid cycle without losing all water, washer smells horribly, must be cleaned - are you kidding? Who cleans the washer that is supposed to clean clothes with a special cleaner?? We understand safety issues of water in open machine, wonder if Whirlpool understands the need to have a soak feature to clean clothes. Undereducated buyers like us and the totally undereducated salesperson at Lowes were obviously a horrible combination. It was all about sales for them. No one mentioned and we had no clue that the huge drum would not clean clothes even using less water than a traditional machine. We thought platinum meant a high quality machine. It clearly was a cleverly used buzz word for sales not a premier cleaning machine. Never, never, never purchasing Whirpool anything again. Wonder if Whirlpool cares, if they read the ConsumerAffairs reports, if they respond. Our hard-earned money is wasted. Our clothes are dirty, the washer smells, and the top is rusting out!

In my wildest dreams I wouldnt have expected that changing a burned out light bulb on a 7 month old microwave would put us out of commission for over a month. Its been 30 days now and Im told it will be more than 2 weeks before the part comes back in stock. Whirlpool had such a good reputation years ago, but thats history. This is a disgrace.

I purchased a Whirlpool Cabrio washer in 2007 and had to replace the control panel for $300 each time twice.

I needed a new washer and dryer, as I sold my other ones with my last house. I have been so happy with the economy of a front loading washer, and the clothes really dont require pretreating because Tide and the washer take care of everything!

I purchased a front loading Whirlpool washing machine March 2017. I have need to have the drain pump replaced and the motherboard replaced. Each repair took 30 to 45 days to get parts and service. I would not recommend the washing machine.

WFW97HEDW, WGD95HEDW American made and equivalent to LG and Kenmore. Size fitted our space available. Price was a bit higher than the Korean models with similar or better features. We bought and returned three consecutive Whirlpool models from Sears. Though we never really got to put the dryers to the test, nor did they fail, the washers were of such a poor quality that they broke down within 1-2 weeks of installation. Eventually we switched to LG and have had no problems. When the Whirlpool fails it locks your clothes inside and to open and retrieve your clothes is just short of impossible. We really, really really wanted to buy the American made brand and we were willing to pay the premium to do so, but these washers were awful.

I purchased a Whirlpool Ref side by side 11-2013. I have had nothing but trouble. First the Ice maker leaked, was fixed. The door to the ref has had serviced 5 times. The tech after many times trying to fix hinge on door twice was told to order new door. This took 6-8 week to get. Came today 5-27-15 too but new door on. It is still not right, has big gap in the middle - still not level as should be. I have called Customer Service again today with no help. All they want you to do is spend more money on a contract. I THOUGHT WHIRLPOOL WAS SUPPOSED TO BE A GOOD PRODUCT......NOTTA....WILL NEVER BUY THIS PRODUCT AGAIN. SO IF YOU EVER BUY WHIRLPOOL PRODUCT BE SURE TO GET EXTENDED WARRANTY. YOU MIGHT NEED IT..........STILL NOT SATISFIED AND NO HELP IN SIGHT.

Im so disappointed with this product. Its only a couple of years old, which seems fairly new as my old washer was over 20 years old when I finally got rid of it because of the noise it was making! First, the Cabrio stopped draining and spinning, even though the display showed that the cycle was done. Phoned Whirlpool, and the best they could do was send out a repairman - at our cost, of course! We refused, and kept using the machine - put it on for an extra drain and spin. Then, it stopped working completely! My husband hauled it out to a repair shop and was told it needs a new motherboard at a cost of $400 plus labor! This was an expensive washing machine, and I feel Whirlpool should offer its customers better service! I guess we need to buy a new machine - definitely not Whirlpool!!

I bought a new top loader Whirlpool washing machine. Water would not drain enough so that the clothes could be dried in the dryer. It does not have the thing in the middle that you put your clothes around. My clothes get tangled together all the time. A repair person came and said that I needed to load the clothes in a different way. Different from what the salesperson told me. Still tangled and still not dry enough to put in the dryer. I have to use the drain spin cycle every time!!! My dryer still takes 120 minutes to dry a load!!! Second repairman comes and tells me I need a new computer system and I will have to use the laundromat. A month later they tell me they cannot get the computer and will replace the machine which is still brand new. Bring new machine and my clothes still will no spin enough so that they are dry enough to put in the dryer!! So sick of this and will never buy another Whirlpool product again!!!

I have purchased a Whirlpool Water Heater on May 21, 2005 from Lowes Model number FG1F4040S3NOV, Product number 0730261, Serial number 05181291061. It is one of the Flame Lock heaters that was part of a class action law suit. The lawsuit has been settled however. I have had three thermocouples to date installed and each time the heater has gone out after three to four days. The technicians I have contacted at Whirlpool all have stated something else is wrong with the heater even knowing that this model has been seriously defective from the beginning. They always tell me to do this and that to repair it. I do not have hot water as of the date of this writing. The original problem began June 19, 2011.

In July of 2014 we purchased a Whirlpool Gold Series model #WRF990SLAM00 refrigerator from Lowes. Within 6 months there was ice and condensation in the top of the fridge. After repair came out and replaced the main circuit board we thought the worry was over. It hasnt worked right yet, making loud noise. It continued to never make ice correctly and now, 18 months later our freezer is out! Everything is unthawed and it will not make ice. We called Whirlpool to explain our problem and the only response we get from them is....they can sell me an extended warranty. We spent $2400 on a refrigerator and they wont even talk about fixing it. We dont want anything free, just ours working. Needless to say Whirlpool lost my business forever. They will not stand behind their products!

Bought in October 2014. Died December 2015. The previous Whirlpool microwave this unit replaced was 10 years old and carried a 5 year warranty on the magnetron. Imagine my dismay to find out this unit carried only a 1 year warranty on the magnetron. So 2 months past warranty expiration Im left with a dead unit. I performed elementary troubleshooting. The unit has a fuse on the 120 Volt input. But the unit must be disassembled to gain access to the fuse. So what SHOULD be a five minute job turned into an hour and a half. The fuse wasnt the problem - replacement fuses blew like popcorn. Fuse placement within the unit without regard for service considerations is a poor design.To their credit, Whirlpool agreed to cover the cost of repairs if I would pay for labor. I agreed. A tech came out and looked at the unit. He said that he would have to order a bunch of parts and that he would be back in contact by the end of the week. Three weeks went by. There was no call from the tech; my messages on his voicemail generated no response. So a couple of days later I purchased a replacement from a competing manufacturer.

Clothes dont always come out clean. If there is anything more than 2 sheets in the washer, it becomes unbalanced and then goes through a rinse until the water is up to the top! You have to watch any heavy load for this! Today there were 3 sheets in the washer and sure enough it kept rinsing until I physically reached in and rearranged the sheets. Then when it was done and I pulled the sheets out to put in the dryer, they were SOAKING wet! I hate this machine and will NEVER get an HE washer again.

I purchased a Whirlpool washing machine (model: AW01D8810 S silver color) and a Whirlpool refrigerator (model: WBM329 TI) together from United Arab Emirates for Dhs 1999/- & Dhs 1199 /- respectively on 28 Jan. 2011. I sent this machine to my hometown (India) in the same packing and I used the washing machine only for three months and found a complaint. I informed this to service center in Trivandrum, Kerala. Their team came to my home and told me that warranty cannot be given as I purchased machine overseas. They added that the PCB for the machine is having complaint and they dont have stock in India. Also, the machine is no longer available in the factory. The Whirlpool company completely stopped manufacturing the abovementioned model. Again, I came to UAE and contacted GEC group of companies for the PCB part. I got a quotation for PCB Dhs 425/- but the items is ex-stock with them. The machine cost only Dhs 1999/- and if I spend Dh425/- only for PCB, and the machine is with me for the parts since one and half years. I dont know what to do. If I spend another Dhs 600 + this PCB cost then Id rather go for another new branded washing machine. The model of machine is AWO1D8810S and serial no. is 12 nc 859247463000 003. Please advise what to do or if I can find the PCB in Kerala. What will be the cost? I am ready to pay the money for PCB but not for the above rates. Please advise, sir.

Does everything its supposed to except get the clothes clean! Nothing gets clean, even on bulky setting when theres supposed to be more water in the machine!

We bought a Whirlpool range. The same day we got it the burner exploded and my electricity went off. I called the customer service to request a replace, they told me a technician had to go and look at it. They did. I had to miss a day of work as they come between 9 to 5 pm (will not tell you what time). The guy say the range is defective (really!??) and will need to request parts. I called them again (after 15 times you wait minimum 30 min each time). They told me they can replace the parts. I said I bought a new appliance not an use one. Money back. Told me somebody will contact me. Week later nobody contact me and still waiting 30 min each time. I called nobody answer my calls. I wonder I may get somebody if I wait hours? No idea. Please do not buy from this guys... They are bad in all the way.

This complaint is a follow-upon the last entry I submitted a week ago. I complained that my Whirlpool washing machine tears holes in clothes, and makes wrinkles that are almost impossible to iron out. Reading that several customers had similar complaints, I was encouraged to call Whirlpool. Whirlpool stated that they had no widespread complaints on this machine. Well, to make a long story short, Whirlpool came out and we paid the repairman $85 to look at our machine and tell us that nothing was wrong with the machine. So, I guess Im stuck with a worthless machine. BEWARE! Never buy a WHIRLPOOL!!!

Bought a Whirlpool French door refrigerator in March 2014 and have had to have it serviced 4 times now - all for the same issue. We get frost in the refrigerator (not the freezer, the refrigerator). The same parts keep being replaced but they are all defective. This last time the service tech said he contacted Whirlpool and they had a redesigned part that should take care of it. Within 3 days of the new part being installed the frost is back. The other issue is the loud noise of the compressor. We have had multiple Whirlpool products through the years, but this is the last.

Washer Whirlpool Cabrio - Needless to say now, spin rinse not working, dark spots in clothes, sound like a jet leaving the room and earthquake at maximum potential when working, all previous reviews more than summarize my problem with the washer. How can we do to take a class action against Whirlpool for the defective Cabrio wash and dryer they are selling. If anybody knows, please guide me the right way to start it.

The capacity is small but it does a good job of washing and drying the dishes. I always check to make sure that all dishes are washed including silverware and they are. My dishwasher is quite old but it is still sufficient for our use.

I purchased all the appliances for my home from the Sears store in Steamboat Springs, Colorado November 17, 2016. The refrigerator stopped freezing a few days ago. I looked at my manual & there is a 1 year limited warranty. I had a repairman come out & he told me there is a leak in the sealed system for the freezer. He doesnt do that type of work- it is very unusual & requires a special certification. The repair would be 500 - 1000 dollars to fix. He couldnt believe my fridge was less than 2 years of lad & is having this problem. Factory defect.

I bought my glass top stainless electric Whirlpool range in April of 2019. It worked great until December 2019. Four days before Christmas my daughter was home alone and using the oven to heat up dinner. She smelled a terrible smell and there was a ton of electrical blue smoke. She called me at work and I told her to turn it off. My husband came home as I was talking to her and pulled out the stove. The place where the stove meets to cord had burst into flames. The wires in the cord were so badly damaged they were all exposed and singed. Our house could have caught fire! The whirlpool company will not stand by their product. They blamed it on the team at Lowe’s who installed the range...Lowe’s has been nothing but confusing and frustrating to deal with! I can’t believe how we’ve been treated. Do not buy whirlpool! These stoves are dangerous!

All of sudden, this expensive microwave stopped heating. Called whirlpool, they said they will charge $300 to fix it and $540 to replace. So much after paying new piece of garbage in 2-3 years.

l will never buy Whirlpool appliances again, nor do I recommend to anyone. My wall over was 1 1/2 yrs old with a worthless 1 yr limited Warranty. I had Total Appliance from Cleveland do the repair, the only ones I found at the time that would work on this type over with a Digital panel. I think the engineers think we all live in Silicon Valley. Unfortunately the cost to repair after I cleaned the oven for the first time was $384.00 to unlock the door and 2 trips and he had to remove the door to replace 2 fuses so the door and panel would work! Im afraid to clean them oven again..I called Whirlpool and the first wait time was 70 Mins... I put the phone on speaker, finally I talked to 2 Customer Service men to no avail. He basically said my Warranty was up and nothing they could do! I said I was going to complain on Social Media and he didnt care! Go to Consumers Digest before you buy any new appliance! PS, I also went on YOUTUBE and you can see all the TROUBLESHOOTING ON MANY APPLIANCES!

Whirlpool Water Heater Purchased at Lowes - Like all the others I see on here. I Purchased a Whirlpool water heater at Lowes Model# BFG1H4040T3NOV. Pilot will not stay lit; customer service tells me to replace the thermocouple which did not solve my problem. This is the second time in 2 years same problem. First time it was fixed under warranty but now since it was replaced once it is not eligible for replacement so I now must decide if I want to pay someone to figure out the problem and I must pay to repair it or what I am starting to think is that I will likely junk it and buy a quality unit and be done with the games and run around and just have hot water, which is all I really want. I will never buy another Whirlpool product in my life and will encourage everyone I know to do the same.

The washer is a lower priced but basic machine with few bells and whistles. However this is what we wanted. Less tech with less problems so for us it works. Does the job it is required to do. Cycles do take much longer than our old machine did. Probably due to water conservation.

I purchased a Duet Front Loading Washer (model WFW9750) in May 2010. In September 2011, the noise level had become intolerable. I called a local service company. They advised me that the main bearing was bad. It would cost more to repair than what it was worth. I contacted Whirlpool. They could not do anything unless the machine was inspected by one of their authorized service companies, which they scheduled. Two weeks later, A&E Factory Service arrived and confirmed that the bearing is bad and the cost to repair will be $1,542.06. Whirlpool customer service transferred me all over the country to tell me that the machine was out of warranty and there was nothing they could do.

Purchased a Whirlpool double oven (WGE745COFH) in September 2018. It is now May 2019. After 5 service technicians verified the erratic temperature fluctuations in the ovens, Whirlpool insists that a +25 degree to -25 degree fluctuation in a heating cycle is normal. The motherboard was changed 3 times, and the sensors were changed 3 times, including hard-wiring the last set of sensors. I called Whirlpool and customer service says that is normal. Ever tried baking at a 350 degree setting that fluctuates from 375 degrees down to 312 degrees while trying to maintain a 350 degree setting? I understand there has to be some fluctuation, but either it took a lot of extra time or burned my food consistently. Ridiculous.So, with the help of wonderful people at Lowes (where I purchased the double oven) Whirlpool is refunding my money and Lowes has taken back the slide-in double oven. In my quest to replace it, multiple appliance sellers have told me that all the new ovens having motherboards and sensors have big fluctuations in the oven heating cycles. I find that unacceptable. My husband and other family members have worked daily in an industry where temperatures were critical. They used ovens that could maintain temperature within 5 degrees of set temperature with analog controls. The home consumers are being ripped off with cheap, sub-standard parts making throw away appliances and getting away with it. What do I buy? Havent figured that out yet, but have purchased a countertop toaster oven that bakes beautifully.

We purchase a washer and dryer from Lowes in 2012 and a couple months ago I begin to notice that the Clorox and the softener draining spout is not working. The Clorox side is full of water, and the softener half of the time dont even drain all the way and not happy with that. The washer is beginning to rust on the inside by the dispensers, the lid area and the outside panels. I should have purchase GE. I would not recommend this brand to anyone.

The machine starts shaking uncontrollably, has to be paused and clothes redistributed but still shakes. The stabilizers were replaced approximately 1 year ago. This worked until today. I was was washing a small load and distributed the load accordingly. On the spin cycle, the washer again began shaking and I shut it off. I will never buy Whirlpool products again!

I bought a Whirlpool gas hot water heater in 2005. In the first 12 months I replaced either 4 or 5 thermocouples and a total of between 15 and 20 from the time I bought it in 2006 and 2012. Only 1 time did the company replace one of them. When I would call them the rep would say things like, There may not be enough ventilation or Was it installed by a licensed technician? The 1 time they did take care of a problem the technician they sent out said NOTHING was wrong with the ventilation or the way it was installed. Oh yea, Customer Service told me that they did me a FAVOR (exact word) when they did that.In 2012 the hot water heater went out for good. The company would NOT do anything about it. I took it back to Lowes where I got it and they replaced it for me since the manufacturer wouldnt. The new hot water heater went out after only 3 years. I turned the hot water on and it was not getting hot so I checked the hot water heater to see what was going in. I found the pilot was burning, but the burner was not burning. I turned the water heater off and and checked everything out. When I tried to relight the water heater, guess what? It will not light. I am now being told that this heater has NO warranty, this 3 year old heater. There is MORE but I wont go into that now. Just know this has been the WORST product and the WORST company I have ever had any dealings with, PERIOD!!!

I purchased my Whirlpool washer and dryer 4 yrs ago. I was planning on purchasing Samsung but the saleswoman at Gils in Bristol, RI strongly recommended this junk!! A washer and dryer should not quit after 4 yrs w/ a household of 2. The dryer never dried properly. Each load took 2 cycles. Yes, repair were called and we were told its a design flaw. The washer just stopped spinning. Repair will would have been $550. These pieces of junk were replaced by GE electric stackables. Fingers crossed....they are working satisfactory!

I bought model N40S61-403 gas water heater. I had it installed, and then I came to find out that you cannot common vent with another power vented unit. I contacted Whirlpool 3 times, and got no help, other then it was hooked up wrong. The issue I have is that the water heater’s pilot light puffs out when the furnace kicks on. These 2 items are common vented, in the installation guide. It does not say anything about common venting until page 11, and even then, it is not in bold or highlighted letters. Now the unit’s pilot light is going out without the furnace kicking on. Once again, I got no satisfaction from Whirlpool, other than it was hooked up wrong. I realize that I am the one who is ultimately responsible. Hopefully, they put something on the box, or earlier in the guide to warn novices, such as myself. As for Whirlpool, that will be the last product of theirs that I put in my home, and as soon as possible, I will be removing 3 other appliances during a kitchen remodel, and will replace them with a different brand.

I bought a Cabrio from Costo less than 2 years ago. Dryer so far so good (big barrel with hair dryer so what could go wrong?). Washing machine is HORRIBLE. Lid latch broke (couple hundred to repair). Now out of the blue I get an F2 error & machine is completely inoperable. I am only user & very careful with it. There should be a recall on this expensive junk. NEVER buy Cabrio or maybe any Whirlpool appliances again. Ive never written a bad review btw.

We purchased commercial washing machines for our building, we discovered that the clothes were coming out of the machines with dry spots and partials of soap. When we asked the dealer about this they sent a tech. to check the machines. It seems that these machines do not allow a adequate amount of water into the tub to wash the clothes. Only 6 or 7 inches of water is not enough water to wash a full load. When asked how this can be fixed I was told it cant be fixed. I was told this is a energy saving machine, which means you can only wash very small loads!What is the point of running a machine for twice the amount of time to do what you used to do in one load? Had we known this before purchasing what we felt was a quality machine, we are now stuck with machine not capable of doing what is required of them. When asked if they would take the machine back, no is all they say. I would never buy any product made by Whirlpool or Maytag because of the way this problem of ours has been handled. We purchased these machines from Prestige appliance, they have been good, but with no support from Whirlpool.

Whirlpool has a terrible customer service! I have an almost new washer broken and I had it repaired. The company is having the same issues in another model and yet, they would not offer to even refund the repair.

Purchased the Gold Series Dishwasher Model No: WDF730PAYM0 Serial No: F14403489 on Dec 2011, started using it from Jan 2012. All is good until June 2014. It started leaking from the bottom, called Whirlpool - the great bad company. Since it is not under warranty they asked to schedule an appointment with their local authorized rip off service company. Technician come on the service day and told me that it is $120.00 for the service call and Labor and parts are extra, first of all $120.00 to come to my house is first rip off, that is the reason Whirlpool on their website do not give any estimates on the service call.After checking the appliance he said main assembly is bad and needs to replace and that will cost more than the original purchase price - what a ripoff. He asked me to contact Whirlpool, they may help since this is the known issue with this model. Called Whirlpool and mentioned and they said it is too old to continue to operate so they cannot help. Ended up trashing the 2.5 year old dishwasher for the new GE dishwasher. Never buy a Whirlpool ever again even on sale. Whirlpool company is not ethical and not ready to help consumer, would love to see them close their operation in America.

I bought my topload washer 2 years ago along with a dryer. The past month, the washer started sounding like an airplane, ready to take off, whenever the spin cycle was on. Then, it started to not start at all on certain cycles or would start to pump water in and then stop suddenly. I had a repair man in today, and it was not good news. He told me that he sees this a lot, especially with the Whirlpool washers and it is costly. The bearings are shot and will cost close to $500 for parts (alone), not costing the price to have it repaired. So now, I have called Whirlpool. The people there are very friendly and sympathetic. But even though I went as high as the supervisor (the highest authority I could speak to), he told me my washer is not on the recall list! I asked what it took to get it on one. Basically, my complaint was filed and end of story. Well, not quite. The supervisor was kind enough to give me the address for the Head Office for Whirlpool Canada. So people, start writing into this address and bombard them with your frustration: Whirlpool Executive Office, 200-6750 Century Avenue, Mississippi, Ontario L5N 0B7. If you have spoken to Whirlpool, ask for your reference number pertaining to your case and include it in your letter along with your phone number. In the meantime, I will be writing a lengthy letter; and I also went out today and bought another washer! Yes, it was not a Whirlpool, and I will never have another Whirlpool appliance in my home. And I will steer anyone away from this brand name. Good luck to all and start writing!

I purchased a Whirlpool microwave oven from American Furniture/TV in Fenton, Missouri on 11-13-2010. It had a Whirlpool 1 year warranty and a Performance Guarantee for five years. I noticed recently that the plastic on the door had hairline cracks near the handle and now is beginning to crack around the glass on the front door. I called American when I noticed the cracks by the handle and was told that it was cosmetic and not covered. Now the cracks around the glass may be a bigger problem if they let fumes out from the microwave. I am waiting for a second answer from American. I feel like the problem is with the plastic itself.

I have a Whirlpool Cabrio washer and dryer set. The heating element went out on the dryer when it was less than a year old. I purchased the set at Lowes. They sent out a repair person who called and told them it was the heating element and he replaced it. Two weeks went by and I could smell something burning. I called Lowes and after two weeks wait the repairman showed back up. He said that the control panel was bad. Lowes replaced my dryer and I have not had any further issues with it. Lowes gets an A+. My washer went out about a year later. It was making the loudest noise on the spin cycle. The repair person came out about 2 weeks after I called and told me that the washer was basically worthless, that the repair would cost more than the washer would to replace. I was totally shocked and decided to use it until it died. In the meantime, I found a repair/used appliance place. They repaired it for $235 and it ran for about 4 months. Then the noise returned. I have had it repaired again. Now the control panel gives me the SE light and stops running with 27 minutes left in the wash cycle. I have had nothing but problems with this machine. I would not recommend Whirlpool to anyone. Im going to have to replace this machine and it has cost me lots of $$. Junk!!

I purchased 4 Whirlpool appliances late 2014. The French door refrigerator close to a year later made a piercing sound several times during a day. I immediately contacted Whirlpool and the representative directed me to YouTube to listen to the normal sounds the refrigerator would make. My first thought was I have been a homeowner for 30 years and countless appliances and never heard such a horrible sound. At the same time they sold me an extended warranty over the phone. He assured me sounds were covered. The sound just kept getting louder and more frequent. I could not take this piercing sound and called back. They sent a local repair service. At the time the repair person came out the refrigerator was not making the sound. I played a video recording and the repairman even said what an terrible sound it was. He continued to check everything over and said - everything looks good. I dont know what the sound is coming from. I asked, What is Whirlpool going to do? He said, nothing, the warranty ran out and your extended warranty does not cover sounds. What a ripoff! Now the drawers broke and another thing they wont cover! I also have problems with the dishwasher I purchased at the same time. Even putting on the extended hot dry I need to wipe everything off. I should have just open a window a tossed out over 2k. The sound is so horrible I am being forced to junk the refrigerator and purchase a new one. Dont purchase Whirlpool and never purchase extended warranty over the phone.

We purchase all Whirlpool appliances for our new house in Florida in late 2015 from Good Deals Appliances. First repair before 1 wk in-house was the dishwasher. Wires were not connected. Now it is the refrigerator (French door refrigerator model K44913210). We reached out where we purchase the appliances and they gave a number of repairman to connect. He came and told us the compressor & evaporator & valve needed replacement, We found that hard to believe that a 2-yr-old refrigerator needed all this repair. Called another repairman to hear same thing. We were also told this problem is so common with this model. Called Whirlpool. They sent a repairman out. Said same thing first two said. They are paying for parts but not labor. We were told by last repairman that this refrigerator hasnt worked from day one. Passed info to Whirlpool and no comment. We paid a lot of money for an upgraded refrigerator to have it quit in 2 years. Totally not acceptable. On top of this the parts may not work for more than 2 years again. Okay Whirlpool who is going to pay for all the ice & dry ice, the other two repairmen that came. The repairman you sent was double the price of other 2 & will not come back till we pay. We will pass our experience with Whirlpool on to all friends and friends of friends.

Bought this front loader washer. It is unbelievable this thing will not wash a load properly. It refuses to spin at high speed because it is constantly out of balance even if you only have one or two garments and it keeps saying add more garments. As you keep adding garment its even worse literally. If you have anything that is heavy in this like a towel or a pair of pants or a hoodie or something like that for sure youre going to have to wash one thing at a time. I will never buy another one. I wish somebody would sue the living crap out of him for this piece of junk. I want my money back...

Bought this washer two years ago. First experience was when a load of towels became wrapped around the agitator. Called in service tech who told me to load the bin with the cloths pressed against the bin wall away from agitator, as if the cloths/towels would stay away from agitator. Two years later, Im ready to the machine to the street. Forget sheets and bedding. The agitator wraps them so tight that I almost rip the cloths/sheets to unravel. I had to wash a pair of work pants that were soiled with mud three times and there was still a stain. I will NEVER EVER buy another Whirlpool product.