I dont like the sensing feature that takes away my choice of water level control. I dont like the locking lid. It doesnt clean the heavily soiled clothes and I have to wash them twice because of the low water level. When the water is running in during the spin cycle, after the rinse cycle it washes away all the fabric softener. It takes longer from start to finish, so I dont see how it could be energy efficient. I dont like anything about the so-called energy efficient models. My opinion is they should not have changed from the old model. If it is not broken, dont try to fix it! I will never buy another Whirlpool product unless I see some significant improvements.

I had owned another Whirlpool Washer before, which died. I purchased this one. It was noisy and unreliable. Whereas the previous one lasted for 10 years, this one stopped working in less than 6. I went out and replaced it with a GE instead.

We purchased a brand new stainless steel refrigerator in 2013. Our 2 year refrigerator stopped producing ice and the freezer stopped working as well. We called Whirlpool customer service and they said they could not help due to 1 year manufacturer warranty only. We called another company (SoBellas) that charged us $85 to tell us that it is the seal system which should be covered up to 5 years by Whirlpool. The man showed me the Whirlpool refrigerator warranty on Google which states the sealed refrigeration parts are covered up to 5 years. There was no specific model numbers listed which gave me the impression this was a standard warranty for all Whirlpool refrigerators. I explained the situation to Whirlpool customer service including the 5 year warranty that is found on Google for everyone to see. I was told that our refrigerator model number did not qualify for that specific warranty. We ended up having to buy extended warranty for $350 on top of the $85 we already spent. This started July 24, we had to wait until August 10 for Whirlpools warranty company to see us. They checked it and said they had to order parts but he supposedly tweaked it to make our fridge run better.... It made it worse and it ended up completely breaking down. We had to buy ice chest and waited until Thursday August 27th for them to finally come back with parts and fix the refrigerator. I took time off from work once again due to our time slot being between 3 and 5 but the guy didnt even show up until 7:30. I could have worked my normal hours instead of taking more time off! The guy never once called to inform us that he was running late. We kept calling the company to make sure we werent forgotten. The guy told us that everything should be working within 20 hours or so, by Friday our freezer was still not working and no ice either, back to square one! I called Whirlpool customer service once again to explain the situation, nothing could be done. The next available time for them to come back out is September 17 for them to come look at our refrigerator. We have been stuck without ice and a freezer, buying food every other day waiting for our brand new, horrible Whirlpool refrigerator to be fixed. Will never ever buy Whirlpool brand again! Actually, we purchased all brand new Whirlpool appliances... Good luck to us!!!!!

I purchased a washer model# wtw560xw, serial# c04830040 on 1/11/11. This product has never properly washed clothes. I have had 3 technicians come out and press buttons on my machine. The most recent supervisor I spoke w is Niki id# **. She said that the machine washes but is not supposed to clean clothes. I am getting blown off and aggravated. I filed a complaint with BBB that went nowhere. Someone from the corporate office named Amanda called me and told me she would look into it and a week and a half later, not return my call. I had to track her down for her to tell me she can do nothing! The hold times are always extended. I have a pile of ruined clothes and a pile that I am attempting to hand wash. I am beyond frustrated and need a machine that will wash my clothes. I am not in the 1800s. I should not be hand washing when I paid hundreds of dollars for this useless machine. I am ready to file a class action suit. I can be contacted at ** **.

As a consumer, Im very disappointed in this Whirlpool Cabrio Platinum washer. It does NOT clean your clothes. Many times Im washing my clothes twice, only loading a 1/3 of a load of laundry in it because of this problem. No matter what you do, it just doesnt clean your clothes. Has anyone considered putting a law-suit against the company. They will NOT stand behind this issue, NOR replace your washer with something that works. Maybe that is what it will take. DO NOT ever ever ever ever ever ever buy this piece of crap washing machine. You will waste your money, your time, your extra detergent it takes to wash your clothes AND the cost of the machine too! The MILDEW SMELL is horrible and no matter what you do you CANT GET IT OUT! Ive tried it all. Im just angry because I had to save money to purchase this set and it is a piece of crap! The customer service is just a runaround, they wont help you! They will just give excuse after excuse. They need to replace EVERY ONE of our washers with something that works!!! For the cost of this machine alone, they should do something to resolve this issue!

My Whirlpool dishwasher is only 2.5 years old. The first 1.5 years we were not full time in the house, so the dishwasher has not been used much. The touch pad went bad already and it was $450 to fix. Whirlpool sent me an email after I vented and it was a cookie cutter reply. They dont care that the appliance was manufactured with a faulty pad. We never buy service agreements because we feel an expensive item like this should last the term of service agreement if made correctly. No more Whirlpool purchases for us!

I am getting numerous F1 codes on my Whirlpool Cabrio washing machine, Model #WTW6600SW2. By doing thorough research on this issue I can see the problem is in a known defective control board (part #W10130544). This part has even been replaced by Whirlpool with a new control board costing around $300 for just the part. After calling for repair service, two people (1 agent and 1 supervisor) refused to acknowledge any known issues with this part and further refused to any type of repair or replacement of the part. It is impossible for anyone in that position to not have knowledge of this problem. Simply look on the internet for a countless number of people with this very same complaint. Even though my washer is eight years old it has had very little use. There are only two grown adults in this household and the machine has never been abused or overused. It still looks new. Whirlpool should be honest and responsible when dealing with this type of problem. They should agree to pay for the part and repair service... at the very least they should agree to pay for the part.

I have owned this Whirlpool Cabrio machine and dryer for almost 5 years. It has been a nightmare. I am forever getting it fix. Now its the notorious LD light, not draining, and it has actually drained, and the company I bought it from does not repair them due to so many problems. Got a plumber to look at it and got it to work.. This is after the company came, charged me 130.00 to tell me they dont repair it. I bought this machine because it was large and I have a big family, energy saver (no, it did not save as much as they claimed) and uses less water. The dryer is wonderful. But the 1900.00 I paid for them was not worth the price. I now have to go up and down my cellar stairs 6 times per wash to stop it, shake the hose, and restart it. A load of laundry takes close to 3 hours due to starting it over. I am gonna buy a Maytag which I use to have and take this to the junkyard. Thanks a ton, Whirlpool and I read all comments and they are ALL true.

Purchased top loading Whirlpool Washer WTW5000DW0 10/12/2015 at Best Buys, first no agitator machine for us. Two weeks later I call for repair service because of the noise from tub. Explained in other reviews as earthquake or jet engines. The machine is in the garage and can be heard through the walls into the house. Repair tells this is normal for the machine and it must be our first none agitator machine.I then purchased a extended warranty policy through Whirlpool. 12/13/2016 machine no longer washing clothes. Call Whirlpool for service. Repair came out 01/17/2017 (a month later). Washer plate had to be replaced. The gear was completely shredded. Not in stock, waited 2 weeks to get repaired. Tension springs on outer tub replaced at same time. Was told the excessive grinding and bumping of the tub was not the reason for the gear shredding.06/30/2017 same problem, I set a repair date 07/01/2017 between 8:00 a.m. and 12:00 p.m. No one shows and no call. I call Whirlpool and they are sorry and set the appointment the same day for before 5:00 p.m. No one shows our calls. I call back. Already closed. I call the next day. Sets a new date 07/05/2017, 8:00 a.m. to 12:00 p.m. Same problem. I called back speak to a supervisor who says hell get to problem and find out whats wrong. Sets a new date 07/08/2017 8:00 to 12:00 p.m. 07/07/2017 I get a call after 5:00 p.m. that the repairman is not available and can we reset for 07/13/2017. I hung up and called back the next day and spoke to a supervisor I had previously spoke with. He called an outside repair company that Whirlpool uses in this area. New date 07/12/2017. Repairman shows and I explain the washer plate was loose again and I smelled metal burning. I had told my wife to continue to use the machine to wash the clothes. The repairman tells me I voided the warranty by doing this. Im standing in the garage while he has his head in the machine trying to get the washer plate out. He shuts the lid and turns the machine on wash/spin says the machine is ok. We have an exchange of words and tell him I want to see the washer plate gears. He says he cant get the plate out now and I wasnt there for him to show it to me. This continued until he forced the plate off. He called Tech Support to say I voided the warranty. He told them customer claims loud noises and banging. I asked to speak to Tech but he tells me they dont speak with the customer. I looked at the gears on the washer plate and the transmission. Both had metal shavings. He tells me he is going to do me a favor and replace both. Its supposed to take a week. Wait and see. I have asked for a replacement or money for the machine through Whirlpool. I was told there has to be at least 4 repair requests for the same problem and the repairman has to determine that there is a problem or that its a lemon. I will not recommend or purchase another Whirlpool product.

Bought this washer two years ago. First experience was when a load of towels became wrapped around the agitator. Called in service tech who told me to load the bin with the cloths pressed against the bin wall away from agitator, as if the cloths/towels would stay away from agitator. Two years later, Im ready to the machine to the street. Forget sheets and bedding. The agitator wraps them so tight that I almost rip the cloths/sheets to unravel. I had to wash a pair of work pants that were soiled with mud three times and there was still a stain. I will NEVER EVER buy another Whirlpool product.

I purchased a Whirlpool electric water heater in August of 2008. The unit had a 12-year warranty on the tank. On January 21, 2012, I discovered that the water heater sprung a leak somewhere in the tank shell; it’s not the pressure relief valve, thermostat or anode port. The tank was never abused and operated well within its design limits. Not sure what caused it to start leaking into the catch pan and out onto my laundry room floor.I purchased the tank at Lowes and went for the longest tank warranty to reduce replacement intervals. I sent Whirlpool an email on 1/22/2012 explaining my problem and I referenced this site. The next day 1/23/2012 I receive a call from Whirlpool (Chris) asking me about my problem. I explained again and they gave me an RMA number and told me to go to Lowe’s and they would replace my hot water heater. I went straight to Lowe’s customer service and within an hour I was on my way home with a brand new hot water heater. Thank you, Chris, Whirlpool and Lowe’s. I am very happy with my outcome on this issue.

I am also disappointed with this manufacturer. I recently purchased an over-the-range microwave oven model KHMS2056S. Within 45 days of use, it quit heating. I initially established a service call through Kitchenaids web site, with the first available weekend appointment approximately 2 weeks away. When the contracted service represented arrived (A&E), he asked me for a cup of water and placed it in the microwave, along with a temperature meter. After running the microwave for 45 seconds, he informed me that microwave was not heating. This was the extent of his troubleshooting, only to confirm what I had already reported in my initial service appointment description. The next step was to order parts and wait another 10-20 days for a new service appointment. When I challenged the technician on this, he stated that they were required to verify the problem and check the model/serial number of the appliance. But these were also provided through the automated service appointment system. Thanks to Lowes who allowed me to return the item, even though the purchase date was outside the 30-day window. It seemed obvious to me this warranty contractor was simply creating multiple service calls to inflate the repair costs. And ultimately the consumer pays this.

Bought this machine in July 2015 to replace LG front loader that went bad. This machine is the worst at rinsing the soap out of dark clothes, and probably the whites and lights too! Dark clothes always have white streaks and spots all over them. Called Customer Service and was told it was due to too much soap, the way the clothes were loaded, needed to add an extra rinse cycle to load, and/or because there is a water softener in the home. Have changed soaps 3x, changed the way I was loading the clothes, and I doubt the water softener has anything to do with this problem. I dont see how adding an extra cycle is efficient and seems wasteful. This machine is horrible and whether I just got a lemon or if its a defect in this machine, I dont know. Whirlpool doesnt seem to care either. I am going to attempt to sell this one and will not consider Whirlpool for the next one. Do not buy this machine!!

I purchased this Whirlpool Gold dishwasher a year and half ago, and it needs repair to the tune of $300.00. The drain pump broke and need to have it repaired. If this was the only Whirlpool appliance that went bad, I wouldnt even write a review, but two months ago my Whirlpool refrigerator, one year and 4 months ago, the ice maker stopped working, another $300.00. Whatever you do, do not purchase any Whirlpool products, pure junk. Their customer service is even worse. What a nightmare.

We were at end of cooking salmon in CorningWare and the door blew open with amazing force!!! It is a double oven... Sounds like Whirlpool doesnt care so trust me we are not buying one ever again. :(

Purchased my Whirlpool dishwasher in 2005 model number GU2500XTPQ3. So it worked for about 10 years and I am fairly happy with that but I have a warning, my control panel shorted out putting out thick black smoke and I was unable to turn off the dishwasher. I had to turn off the switch at the breaker box. If my wife had of been the only one home she would not have known how to turn it off and would have had to call the fire department. I dont know if the short would have led to an actual fire but with that much heat I have to believe it would have. Warning, dont run the dishwasher when no one is home. Hope this helps someone.

Purchased the fridge from hhregg in August/September 2012. Model G16FARXX. After less than three years of owning it, found out today that the compressor is shot and will have to be replaced. Replacement/repair costs are ~$900, almost as much as the fridge brand new. Chatted with customer support and then would/could not do anything. I feel ripped off. If it happened after 5 years of use, then my attitude would be different, but not a major component going out in less than 3 years.

I purchased a Whirlpool Gold from ABC Warehouse in Flint, MI, for $2099.00 before tax and it was delivered on 10/22/2010. Head-liner of inside of refrigerator has a crack about 3-3 1/4 inches long and the refrigerator is running more often. A repair tech came today, 10/14/2011, and did his job fine. He called Whirlpool and they stated to fix it with epoxy? The repair tech is ordering this. I called Whirlpool at 9:00 am right after the tech left at 1-800-253-1301 and spoke to Sherry. I explained everything to her in a very nice manner and she stated that according to the manual, they give us it is for repair only? I said, ok, could I please speak to her Supervisor and she said yes but it will be the same answer. I spoke to her supervisor, Lisa at 9:15 am, she came on talking about the problem and let me talk, I asked her on several occasions are you still there, and she said yes, her words were that Whirlpool only repairs nothing else for the year as per my paperwork (record). I said we dont even get this till after we purchase the item, I mentioned I had a Cabrio Washer and it was junk and had more service calls than any other machine I owned. I have a stove as well from Whirlpool it’s been good so far, I told her with service like this, and them knowing their liners are made of cost cutting saving materials as I have read enough complaints about this on the internet, that Whirlpool is eventually going under and so are the other small shops that do part work for them and their jobs will be outsourced to Japan, China, India and so on, I asked if there was another person higher up than her I could speak to and she said no, they’re not available at this time I snickered and said thats management for you. They have a customer service rep (call center complaints which is Sherry), then supervisor like you (Lisa) then some other management that dont want to talk to you. Way to go Whirlpool. I told her to document that I will never buy another Whirlpool appliance and I will definitely tell others and so on, and if we get enough folks to ban them they will leave USA or close and then Sherry and Lisa will be unemployed just like the rest of us in the good ole USA. Poor appliances for folks that can barely afford to make it and if you’re lucky and working like me and you buy something; shouldnt a refrigerator last more than this, and you stand behind your products? I also told her I know some are abused but this was not an abused product from me. It is a Whirlpool ‘cut your cost savings product’, and forgets the customer. Please look at the old appliances, I also mentioned I have an old Amana in my garage that is 17 years old runs great and never had a problem. And I gave her up for this piece of junk Whirlpool. I then told her I will write letters, emails and everything I can think of to ban this make and product. Model number of this refrigerator is GI7FVCXWBO, freezer on the bottom, fridge on top, side by side doors, solid black with ice maker. When I purchased this I bought it to last a long time as I had to finance it, and take from our monthly income. I had never had a nice fridge, but heck this is not nice. It’s a joke and the sad part is, I owe over $900.00 still and just got laid off. Thanks to the good ole USA and Michigan, but I will pay it off no matter what cause I pay my bills, and stand behind my name as a good person and citizen unlike Whirlpool. Boycott their products as they dont care about us or the American workforce. Oh, and this damage was not caused by abuse to the fridge - it was poor quality of materials in their products. Thank you for letting us complain about products! Also, it’s not like I can go out and buy another refrigerator as it took me over 18 years to get this one. Thanks WHIRPOOL for letting me down on another bad product but it will never happen again. Ive definitely learned and will teach others. Its just not fair that these big manufacturers can get away doing this to the poor people, maybe its like they say; corporate greed?

When I first bought this machine I loved the big tub, but I was concerned that there was no agitator. It confuses me how clothes can get clean if there is nothing to rub them again. Even in the olden days they rub clothes against a board. Well my concern is valid and I believe the washing machine industry needs to go back to the old model, as this new version does not work.Here are all the problems: 1) The machine judges how much water to put in. This doesnt work. I follow the directions and outline the perimeter and dont overload, yet still it just barely puts in enough water to make the clothes wet. Im all for conserving the environment, but enough water needs to be provided to actually get the clothes clean. I would like to be the judge of how much water should be used, so I would like to be able to tell the machine if it is a small, medium or large load. I do believe that the lack of enough water is why the clothes do not come out as clean as they should and why they end up smelling (see #4). 2) There is no agitator, so there is really nothing available to help clean the clothes. Spinning them around like a maniac is not enough, which leads me to the next problem. 3) The clothes come out twisted terribly and then many times come out of the dryer wrinkled because of how hard they were twisted. I tried to select a less harsh spin cycle, but then the clothes are too wet to put in the dryer. There is no happy medium.4) Biggest problem to date: Our clothes/towels have all started smelling. You know that smell when you leave your clothes in the washer too long (like two days) and then put them in the dryer? Its that smell. The clothes/towels dont smell when you immediately take them out, but they do smell at any bit of moisture. When I dry myself off after the shower, I notice the newly washed bath towel smells like a wet dog. I have used the pods, liquid detergent and powder. I dont remember having the smell problem when I first bought the machine and used powder, so I just returned to using powder today. (Ive even tried doubling up on the pods, but the clothes still smell.)This leads me to problem number 5: When using powder in this machine, the machine does not empty the powder container completely, and so the clothes do not get the required amount of detergent. Often there are clumps left over in the powder dispenser, but not always. (This is what led me to go to the pods and liquid detergent in the first place.) But at least with powder (I use Gain) my towels dont stink after the first time I used them.I wouldnt recommend this machine. I really researched machines before I purchased this one, but they all had bad reviews, so how do you pick? And I never look at the good reviews because we all know so many people are paid to rave about products they know nothing about, or it is a company employee writing the review. This machine is a huge disappointment. I am going to try adding a rinse cycle like a previous reviewer suggested. Maybe the extra water will help with the smell. Of course this is not good for the environment though, so this whole way of making washing machines with no agitator and limiting water defeats the energy efficient goal.

I purchased a Whirlpool refrigerator with an ice maker exactly 2 years ago. It stopped making ice. I called a Whirlpool repairman and he said there was a leak in the freon tube. I should get a new one. I did, am trying a basic GE with icemaker.

I have had my Whirlpool W10280546B HE washer for 1 1/2 years. For the last year, I have had constant problems with the washer leaving a large amount of residue (in spots) all over my laundry. I have always run my washer as instructed, and I only used HE detergent in the correct amount. This residue appears to be fine lint, but may be lint combined with detergent.I have used the washing machine cleaning tablets and powders, but this has not helped at all. No one seems to have ever heard of this problem. I have to clean off these spots which cover approximately 1/3 of each article with every washing. The dryer helps get some of it off, but not nearly all of it. Any suggestions besides buying another washer of another brand after only 1 1/2 years?!

After 48 years of marriage, I had never had a new, matching washer/dryer set. I had had several new washers, but only used dryers. These all were very good units and served me well for years. So I was excited to buy a new, matching set. I have never been soooo dissatisfied with anything in my life. As I have read from other reviews, the washer uses very little water, sometimes hardly enough to get the load of clothes wet, very little soap, and in my opinion, does hardly any agitating. I dont feel my clothes have ever appeared clean. The only ones that look clean were the ones that started out looking clean when I put them in. I know this is all an ecology thing, water saving, government guidelines, etc., but please give me my old washer back. It did enough agitation to get clothes clean. And the dryer usually will not get the jeans dry on the first attempt. I have tried various settings, and they just dont get dry. In short, I HATE THIS WASHER/DRYER SET. I have heard others talk about the same thing. No one likes them, but we are stuck with them. Would like to have the government step in and see how dissatisfied everyone is with them and force Whirlpool to give us our money back, trash these units, and buy something that actually works. PLEASE, IF YOU ARE LOOKING FOR WASHERS AND DRYERS, DONT BUY THESE. I believe they are called Cabrio.

This Whirlpool washing machine is incredibly annoying and slow in everything it does. First off when you press the START button it takes 2-3 minutes before it decides to do anything, like maybe add water (except click, click and more click). If you have pressed the start button and you want to stop it to add something... again you have to wait almost 2-3 minutes before the lock is released and you can open the door. I am at 2 hrs and 15 minutes as I write this on the LIGHT WASH cycle with extra rinse and its still going. I have never seen anything like it. Cant imagine how long a HEAVY CYCLE takes. Cannot even try to measure the time. I put the load in and go to work and hope its complete when Im done 8 hrs later.We had a Maytag for 15 years with no issues (other than a drain hose cracked and had to be replaced) and it was time for a new one with a move to a new place. The sales associate convinced us this was the best machine at the time... Well what a mistake that was. There are no complaints about the actual washing. Everything comes out clean but I suppose taking that long I cant imagine why it wouldnt. I certainly cant recommend a Whirlpool washer to a friend, because I dread the thought of doing laundry at this point.

I have a Cabrio washing machine and the circuit board has gone bad. I understand from Whirlpools customer service that if your machine was made before 2005, they are fixing the issue. Mine was made after 2006. Even though the problem is the same, Whirlpool will not correct the problem. I was told it was fixed in the new machines. The circuit board goes bad and you have to start and stop the machine at least three times before it will start your cycle, then it stops again at the 17 minute mark and you have to cancel and start the machine again for it to finish its cycle. The error is F1. Customer service acknowledged that this is a known problem for the Whirlpool machines built before 2005 but deny any claim that is is happening to the machines after 2005. Looking at all the other complaints, it is still a problem. I am disappointed in Whirlpool for their customer service attitude and for them not standing behind their product and fixing a known problem. I have always bought Whirlpool products but going forward will be switching to a better company. Shame on you Whirlpool. For a machine I spent $1000 on, the part is going to cost $300 to fix.

I purchased my Cabrio washer and dryer 2 1/2 years ago, and for the past 6 months, I have dealt with it being unbalanced and I tried everything to get it balanced. When I researched the problems, I found so many other consumers are having the same problems and that Whirlpool will do nothing about it. I decided to start a petition on Change website to try to force Whirlpool to stand behind their product and correct the problem, offer us a refund or another product, or even fix the darn thing. It is tough economic times, and we spent money to have something that was energy-efficient as well as a product that is supposed to carry a good name. I am a single mother with three children, and I dont have a $1000.00 to throw away after 2 years. This is shameful that we, the consumers, have to deal with this. Please go to the Change website and sign my petition. The more signatures I get, the more leverage we have to deal with Whirlpool. Lets pull together and show Whirlpool we will not stand for them robbing us of a quality product. Thank you so very much.

I bought this washer on 2-28-09. By 3-12 the thing took a crap. The whole counter balance broke off away from the drum. This washer lasted 3 years and 1 month. What a piece of garbage. I expected this front loader to last a lot longer than 3 years! Of course when I called Whirlpool they said, “Well its not under warranty so you can buy the 1-yr warranty for $300.00,” and theyll come out and fix it for me. If Im going to pay $300, I might as well buy a new machine! I only paid $600 for it and to last 3 years is pitiful. This is defect in workmanship if the machine breaks in only 3 years. I told her that something should be covered because it should last longer than that. She basically said “oh well”. Oh well, I guess I wont be buying another Whirlpool again. Steer clear of this Duet Sport machine!

After years, the gas hot water heater model fg1f5040t3nov went out. The plumber had me get a new part. 2-3 weeks ago, it went out again. I am trying another new igniter assembly. If it goes again, Im getting a new heater - not a Whirlpool! My plumber says he can get me a new one for a little more than I spent on the Whirlpool, and its much more dependable.

We replaced our 20+ year old washer and dryer with a Cabrio set. I read the instruction booklet twice to make certain I did everything correctly. Ive washed two loads. Both times, the clothes were in a ball at the bottom of the washer. Everything was horribly wrinkled. DO NOT BUY this WASHING MACHINE UNLESS YOU want your CLOTHES to COME OUT in a WRINKLED BALL.

WTW4950XW2 - I purchased My whirlpool washing machine wtw4950xw2 from best buy in 03/30 2013 and it just stop working after 3 yrs. The manufacture warranty was only good for 1 year. I think companies does that on purpose because they know these new equipments are not going to last. I think before they use to have at least a 3 yr or better warranty on appliances. First it started making this loud sound when on the spin cycle, so I had a repair guy come out. He told me that the bearings needed replaced so (how does bearings goes out in 3 yrs). I asked how much will it be to replace parts/labor. The Parts cost $250 and the labor is $200. I might as well buy a new washing machine. I am so disgusted with this machine. My previous Whirlpool, which was not the new modernized, I had for at least 12 years and also I bought a whirlpool dryer. My Dryer stills works after 15 yrs. Im going to try to hold on to the dryer until the long haul. I wish I just would have gotten my old washing machine fixed. Now Im looking for a new washer and I wont be doing a whirlpool or anything with a push to start - just a plain old agitator, no sensing mechanism, just basic.

I bought the Ikea dishwasher (model IUD8500BX1) in 2014. Because it’s from Ikea, it has 5 year warranty. I was using it daily, as I have a family of 5 and we cook and eat at home most days. I have called Whirlpool at least 4 times according to the repairman that was here today. Ive already had to replace the pump because it was holding up water. After which, mold started occurring in the washer. The technician who came out found 4 fault codes on the machine. He was prepared to replace sensors and the circuit board for the heater and the pump, since it likely had mold. But Whirlpool says the parts are functional therefore the replacement parts won’t fix it. He is not allowed to replace anything.Considering the mold is an after effect of the failure to drain, you would think they would fix the mold as well. A replacement dishwasher would be nice, but at least replacement of the internal plastic parts that I cant clean. Instead, they tell me to bleach wash it and run a cycle with bleach. Guess what, Ive already done that. And according to the technician hes never seen a dishwasher have this much mold when it’s used as often as I use it. If you are buying this product thinking they will stand by their product, think again.

I have purchased 2 Whirlpool washers in the past 6 years. Both have been a huge disappointment in quality and dependability. The 2nd washer I bought May 8, 2015 had problems from the initial purchase. In just a little over 2 years I have had to replace the suspension rods, and now the transmission is broken. Both washers had transmission problems. I have bought my last Whirlpool products. I recommend persons considering buying a Whirlpool product check the reviews before you purchase! I cannot believe this company continues to survive.

I also fell for the Consumer Reports BEST BUY of the Whirlpool Cabrio set. The dryer has had the heating element replaced 2 times already in 3 years. The washer reads all errors, and the repairman said today, “dont bother fixing, buy a new SPEEDQUEEN.” With the Board going out, and also the faulty bearings--will NEVER buy anything Whirlpool again.

Originally, I loved my machine. At the one year mark, my washing machine began a f51 error code. I looked it up and it had a recall. The entire board had to be replaced. Now, I keep getting a ul code and it will not quit. Also, the inside of the top is rusting out so badly that chunks of rust fall into the washing machine and stain my clothes. I wish Whirlpool would fix these common errors. I see many other people complaining online that the same thing is happening over and over.

I have many rentals, and for over 39 years have always bought Whirlpool dishwashers for them and my own home. I have noticed over the last 15 years or so they are getting more and more poorly made. First I quit buying the plastic tub ones because they collected mold on the back. Then putting one in a rental, we went through 3 brand new ones that all leaked before we got a good one. Now, I bought the very best for my home 2 years ago, had the pump replaced under warranty due to leaks. Now, the plastic upper rack wheel has snapped off its plastic base. For under 30 dollars you get a replacement kit for it, that is all metal. So why didnt Whirlpool just put in the metal ones and charge a little more. So this will be my last Whirlpool, and all the brands they make. Do your research, many of the name brands you know are all made by Whirlpool.

My KitchenAid side by side refrigerator/freezer is a beautiful thing, shiny steel surface, gleaming white inside. However, its made poorly. The ice cube maker compartment broke and the replacement came without any installation instructions. It was hard to figure out and I broke it. Now, everything in the refrigerator is freezing and changing the temperature on the digital panel makes no difference. McKinneys appliance, where I bought it, no longer has a refrigeration technician and they referred me to Whirlpools 1-800 number where I supplied some information and sat in my chair on hold listening to music for a half hour before hanging up.The recording on the phone suggested their online chat where I was asked the same sorts of questions and was told I would get the answers I wanted by paying $5.00. I had no idea what I was getting into but I didnt pay, just terminated that inquiry. Feeling cheated by the company whose product I had mistakenly purchased. Im now running the risk of a technician visit, sometime between 8 am and 4 pm a couple of days from now. I have to be prepared to wait around all day for somebody to look at my refrigerator, charge me a lot of money and, from what Ive read online, potentially see the problem return in a very short space of time.

Dishwasher has had multiple issues in the 4 years of use. - Incomplete cycles - need to call repairman to figure out why the dishwasher does not complete cycles, fills with water but doesnt go into clean cycle - In 2 years had to replace grommet due to leaking water. - Top rack slide rail plastic ends broke needing to purchase both new ones. - Detergent door quit opening - door does not open during entire cleaning cycle.- Design flaw with silverware rack on the door, be careful not to block or silverware will not get cleaned.

I bought a Whirlpool washing machine last year. Exactly after one year the bearing problem and noise starts from it. So I do not recommend this machine to anybody because of this bad experience and also high service cost.

Whirlpool® Gold® 5.8CuFt Capacity | GAS Stainless - This was not an inexpensive stove. The self cleaning oven function is a total failure. You are not supposed to use oven cleaner on the glass, it now has obscured the view into the oven. The top of the stove is very difficult or impossible to clean. The knobs are a dangerous issue. They will fall off at the slightest touch and the stainless markers around the knob are just a stick on label. The oven temperature is not accurate. The bottom drawer is completely rust spots on the inside. What more can I say. Oh I know. Whirlpool your quality is a disgrace and I want a refund.

Within 10 days of installing our new Electric range the cooktop does not look new and although we have used the prescribed cleaning methods, will not remove some cooked on spills over one burner and another burner has white rings around the glass above the dual zone cooking element. While we did not choose the top-of-line model; had expected much greater durability and appearance for our new range. My call into Whirlpool service made me feel like mine was an extremely isolated case and yet nothing would be covered as would be classified as customer fault. Highly disappointing as the cooktop on the range that we replaced seemed so much more durable.

The duet washer is just over one year old and started showing F25 code on screen. It had been making a really loud noise in the spin cycle. Last week, a really loud noise and then the loads wouldnt be spun. There was a puddle of water on the floor near the machine. We had a repairman out today and he stated that theyre repairing these machines all the time. He stated it was the bearing and that theyd been told that Whirlpool had installed bad bearing from a different supplier. I called the Whirlpool experience and after 4 minutes and 19 seconds, I actually spoke with a service rep. She said since my machine is less than one month over the one year warranty, Id have to call the extended warranty people. I asked for a supervisor and after 2 minutes and 38 seconds, she came in line and wouldnt budge from her story. They also stated that there are no service issues with this model washer. Extremely poor attitude and Whirlpool is doing everyone, whoever purchased a duet washer, a terrible job on these washers. At least, Ive now found out that there are a lot of other folks out there with the same problem. We need to get some attorneys to start a class action just like the mold/smell customers did already. Sad, sad day for Whirlpool as Id been a customer all my life.

We purchased this dishwasher (Gold Dishwasher WDF60SADB) because of its low 49-decibel rating. It goes over 60 decibels regularly and occasionally up to 70 during operation (not including drain noises which cannot be controlled by the dishwasher). We used a tablet app to confirm. Decibels are not linear, they are exponential. 70 decibels is what your average shower or dishwasher sounds like. 50 is about as quiet as a refrigerator. You have to talk over this dishwasher. And yes there was a big price difference between it and Whirlpools next loudest rated washer.Whirlpools customer service says they will not replace or repair based on sound ever, only for functional failure. Bottom line, dont pay any attention to Whirlpool sound ratings. They dont stand by them and do not consider gross overages a defect. Fortunately the retailer (Lowes) does stand by what they sell and will trade for any other machine by any other manufacturer. We have only good things to say about Lowes in this process. This machine arrived Wednesday, and we pick a replacement Sunday. It will not be a Whirlpool. I will never buy a Whirlpool anything again. We said it will do X but we dont care if a brand new one wont is no way to do business.

My family purchased a Whirlpool stainless steel dishwasher at Lowes for around $500. We were replacing a very old GE dishwasher which was so loud you had to leave the room anytime you started it because you couldnt even talk over it. We love the new Whirlpool dishwasher. It is so quiet we thought it was broken at first because we couldnt hear it running and even though it cleans exceptionally well we still sometimes have to look to see that the light is on to know that its actually running. The whole family agrees this may be one of the best purchases weve ever made. The only con I could think of is my son and I put the dishwasher in ourselves and this is the first one weve ever done and the instructions werent as clear so we had to redo the piping of the waterlines a couple of times to figure out in what order to be done. But everything hooked up correctly and worked immediately without a problem. Couldnt be happier.

I purchased a gas range with JDR8895 last 09/06/2007 at Home Depot in Metro Denver for approximately $1700.00. I will make my final payment on my Home Depot account next month. I was preparing dinner last September 10, 2011. I had the pans on the cooktop, one on the right rear and one on the left front burners. This was the set up because the right front burner has stopped working some time ago. Both burners were on a low setting as I was simmering pasta sauce and just warming water as I was later going to boil it for the noodles. I was in my living room when I started to smell something odd. When I approached my kitchen, there was a fire coming from the rear of the cooktop and beneath the three burner knobs. It smelled like an electrical fire. I immediately turned off the burners with my hand wrapped in a towel and started putting out the fire by hitting it with the towel and blowing. The towel caught on fire. I grabbed my fire extinguisher and was ready to spray when finally, it looked like it burned out. The smell in my home is terrible, when I tried to test the lower burner it looked like it was catching on fire underneath the knob as well, so i immediately turned it off and batted it with a towel. Im not sure what happened here. I will make my final payment on this range next month and had the previous range in here since 1977 and that still worked fine. I spent a small fortune on this Jenn-Air, only to have it catch on fire that could have potentially burned my house down.On various web sites including consumer affairs, JDR8895 has many reports of fires. If this is a known problem, why has it not been addressed as a recall? My 9-year old was making soup the day before while I was in the living room. This could of easily happened to her! It is a very dangerous situation to put your consumers in!Whirlpool Corporation contacted the appliance repair company, Columbine Appliances, to inform them that they would only be covering the cost of their visit and not the cost of the parts to be replaced in the range (the ones that caught on fire). Through Columbine Appliance, Whirlpool wanted to inform me that this is not a safety hazard and that it was my fault as I got water in the control knobs. This is not true. If I did, I was not aware and was unable to find any literature about that being a safety hazard or that it could cause a fire. I have found and have forwarded to the CPSC many instances of this exact problem, often when the range was not even in use and are happening to other consumers. I am working on combining the data, contacting the other consumers and have since refused service on the range by Columbine Appliances. Whirlpool only tried to contact me after I left them a message regarding the status of the range and that I had no interest in paying for what I viewed as a defect in their range and a safety hazard. I found a news story of this range going up in flames. Its unbelievable that this company continues to stand behind this product and blame these fires on the consumers actions. I am disabled and have an oxygen machine in my home. I have no desire to have this unit catch on fire again and potentially die, especially since water does, on occasion, end up on cooktops. Thank you for your time and attention to this matter.

I had this same refrigerator in another home and had no issues, this particular one now I have nothing but issues with it. It seems that the quality is not consistent. First the ice maker was not working, then the freezer light burned out and now there is extensive frost build up in the freezer. The refrigerator is only 2 years old!

The space could be laid out a little better. The flimsy shelf is not real stable for foods or ice tray. Where the shelf locks into the side wall is not deep enough to stabilize the shelf itself. The flat indentations in the bottom, where they meet the front, have an edge that makes properly cleaning the freezer a bit difficult.

I purchased a Whirlpool Water Heater BFG1J5040T3NOV from Lowe’s and have had numerous problems. The biggest issue is having to replace the thermocouple three times. It works fine for about a year then I need to replace it again. This is tiresome and wasteful and Whirlpool should be ashamed. As a company that once had a high reputation, this is sad. I would not recommend buying anything from them, especially their water heaters. After repairing this one, again, I will look elsewhere for the next one.

4 year old gas range, used self clean mode yesterday, for first time, upon completion opened oven door, not very clean and found 1/2 moon shaped raised crack in center of oven floor. Customer service insisting repair tech must come at cost of $60.00 to determine cause. I believe this is manufacturing defect, that they are not willing to admit. Offered big discount on new range. NO MORE WHIRLPOOL FOR ME!!!

Why would I, and others buy Whirlpool made washers, with all of these service problems? Now I understand why they have profit/loss statement problems, and stock prices in the pits.

I purchased a Whirlpool cabrio mod. wtw5840bwo washing machine in Oct. of 2014. As of June 2015 I am ready to kick it to the curb. The washer works to it design and hasnt broke down but it doesnt clean our clothes. We load the machine, add the right amount of clothes and recommended detergents and 1hr later after the wash cycle is completed, the clothes still stink with the smell of daily perspiration. I went back to using our old washer that has a worn out agitator. It does a better job.

I installed this Whirlpool Gold Series oven in December just before Christmas. I cooked a 9lbs Turkey for over 4hrs at 350 degrees (it should have only taken 21/2 hrs at 325) used a thermometer to test the temp. Well the breast part was fine but later in the evening I removed the entire turkey only to find that the legs, thighs and bottom of the turkey was still RAW. Lucky no one had asked for that part of the turkey. Next I tried a small prime rib roast. Same thing happened. The top of the roast was fine and the bottom was RAW. I dont dare cook anything in the oven now. Called whirlpool and they are going to send someone to look at it but I wont hold my breath for any results. After reading the same complaint on several reviews and the TV show Marketplace it seems to be pretty standard for this product.

I bought a range on 2/11/11. On 2/14/12, I cleaned the oven for the first time at high temperature and noticed burned grease marks which appeared at the inside of the glass in front of the oven. I called for service and the repairman took apart the door and cleaned it. He said it would probably happen again. There was a leakage somewhere and he couldnt repair it. I think it is a quality control problem at the manufacturing levels.

I hate my Cabrio units. Dont waste your money on these machines. I stay frustrated because I have to work so hard doing my laundry. Clothes not clean, laundry liquid on clothes, parts of clothes not even wet, debris left on dark colors from spin cycle, lint all over dark clothes from dryer! Mad in Texas.

On 3/31/2012, we purchased a Whirlpool refrigerator (model #ED5FVGXWS07, serial #HR14602963) from the electronic appliance store called SuperCo, located at 17523 Colima Road, City of Industry, CA. Within around a month, we noticed that things kept in the refrigerator all showed weird phenomena; raw eggs were frozen inside the shells and ice is frozen on food and utensils stored, not in the freezer, but on the fridge side. At the same time, all food kept in the refrigerator turned bad easily, especially during summer time. Cooked food went bad and had a bad smell within just three days of being kept in the fridge. Also, the ventilator-like part on top of the fridge (the part which released cold air) had ice frozen around it from time to time.Obviously, the fridge was not working, as the freezer was not cold enough and the side was either making food turn bad or causing ice to freeze on stuff kept inside. The temperature seemed to be extremely uneven inside. We then asked SuperCo for repairs or a replacement, but they refused and referred us back to the manufacturer, Whirlpool. Repair services have been called three times on 2012, according to the paperwork records I have: a) on 5/31/2012, bad damper was broken and replaced; b) on 6/7/2012, (according to paper records from SuperCo), replaced parts; and c) on 6/20/2012, turned ice maker off and cleaned (the hand writing was hard to read).Then, around December of 2012, after the services, we experienced another great problem with this fridge again. When ice cream was kept in the freezer, they appear to have melted and my brother suffered from diarrhea after eating the ice cream. The ventilator-like part on top of the fridge still had ice frozen around it. We then took pictures as fresh vegetables kept at the bottom drawer of the fridge had ice frozen on it, too. I finally emailed Whirlpool through their official website on 2/7/2013 and asked for a new fridge replacement based on the Lemon Rule. An e-solutions specialist, Judy, replied that the product was warranted for a specified time period for repairs, not the replacement of the product, and Whirlpool declined my request for a replacement.Repair service was then requested by me for the fourth time, through email. On 2/21/2013, this fourth repair company came and checked the fridge. After a detailed inspection, the technician concluded that some parts of the fridge needed to be replaced, one of the parts called the thermostat. Strangely, after he called his company, he changed all that he said before and claimed that the fridge was 100% working and that no repairs were needed at all. Even when we showed him the frozen vegetables from the fridge side that we got recently, he insisted that the fridge had no problems at all and left.The way Whirlpool responded to my request was extremely disappointing, with their refusal to replace the fridge after three complete repair visits, and the fourth visit changing the inspection conclusion with no reason. Of course, the disappointment is greatest with the extremely bad quality of this electronic appliance. As of this moment, my fridge could still not keep food well and is causing us bad health. I think the only way I could go to now is to take action against the company for the lemon refrigerator, for breach of warranty, and maybe fraud.

The washing machine is making inviolable noise. I had purchase a semi-auto Whirlpool washing machine from Lotus Koh-e-fiza, Bhopal two months ago. Initially, the company sent a man for demonstration, and at that time, the machine was making a sound and the mechanic removed his back plate and his components and saw that the plate of heating rod is unscrewed. He temporarily tightened that plate with normal screw, and after two months, the same sound is coming again.At present, we are not using the product for the past 5 days and launched a complaint to customer care. The call attender said that the problem will be solved in 20 hours but no one came within 4 days. Today, 21 September 2011, I called to customer care. He was telling me that the complaint has been attended by our attender and at present, no complaint is pending. The washing machine is in warranty period and I am not satisfied with the service of Whirlpool. At present, I am using the product of Godrej and LG, and the service of both company is very good then Whirlpool.

The American Standard 95% 2 stage variable furnace is by far my favorite furnace to install. I know exactly what to expect from this furnace and I have had zero factory issues with this model. Outside of making a few sheet metal transitions this American Standard standard 95% furnace was very easy to install as well. And like the 2 stage variable … no factory issues.

I have had my Whirlpool dishwasher for 8 years..I cant use the top rack anymore as it doesnt clean dishes!! I bought a brand new one for my cabin..I hope it works longer (right now it cleans amazing).

Purchase 2009 Duet Washer & Dryer (WFW9700VW00). Recently have had error codes coming up - F35 for one. Could not get washer to reset. Had to keep unplugging and plugging back in. Service was called and the tech knew right away what was wrong. He ordered and installed an analog pressure switch. While he was working he mentioned that this was a known error and if we had called with this problem a couple years ago Whirlpool would have replaced the washer. Im not looking for a replacement but I feel Whirlpool should cover the part having been a known issue.

When my dryer died my wife and I decided to get both a new washer & dryer. I kick myself for two reasons. My 15-year-old washer which worked fine I replaced, and I didnt check reviews before buying. What a mistake. The eco-friendly Whirlpool washer designed to save energy doesnt clean close, my towels are the worse. Coming out of a shower and using a freshly washed towel to dry off and it smelling like it had never been washed tears it for me. Im hoping like many others they will rebate or even better recall and pay back the money I spent on a worthless washing machine! So, if Whirlpool wont do the right thing, I will do my best to warn others to not buy this top loading piece of **.

I love my Whirlpool 4.7 cu. ft. top load washer because it has a pretreat station that is super handy for pretreating stains in a handy little place. The agitator is stronger than my old washer and really gets my clothes cleaner. Its also very quiet and easy to use all the buttons. The best feature is the deep water fill that you can select for more water.

Very reliable. Handle large large loads of laundry. Do not have to prewash any clothes. I will always use this brand.. My parents used this brand while I was growing up. There is no other brand I will use. Thank you Whirlpool!

Friends and family dont you ever dare to buy a refrigerator from Whirlpool - Best Buy!!! They sold me a defect refrigerator and after 2 months begging to see a technician, they are telling me that they are going to fix it. Im so tired of them trying to fix it. Theyve been here 4 times with no luck. All my food is rotten and frozen. And its a new refrigerator. Gosh. As you can see, the water in the plastic cup that I left in my refrigerator are frozen which is not supposed to happen. I feel that Im dealing with nonsense. They dont care. They just took my money and thats it. Im left with a new defect refrigerator that doesnt work. Ridiculous.

We have a Cabrio washer and dryer. The Washer has had problems since year one. We have just gone through service with Sears to fix a rusted out hinge on the lid. The tech broke the lid trying to drill out the rusted screws. He ordered a new lid and six weeks and one day later came to put the lid on. This was terrible. We were rescheduled two times for our appointment. Today the washer will not start on the cycle when you press the start button. We will never buy another Whirlpool product and not Maytag if what I read is true. Probably will be six more weeks to get this resolved.

Purchased model # WRX7355D8MOO through Lowes summer of 2013. By summer of 2014 ice started building up under freeze drawer. Little did I realize the compressor was failing, air flow was stopped up. Ice maker failed. In 2016 water dispenser calibration off, freezer failed. Called in certified Whirlpool repair. They spent three days troubleshooting problems. Repairmen told me, not to spend any more money to repair this fridge, buy a new fridge. I spent $2300 on this fridge. Its only 2 1/2 years old. Whirlpool better get their quality control issues resolved or shut down the plant. I know many part are made in Mexico, poor quality. Why pay for an expensive appliance that only last two years.

10 years, no problems with our 25 cubic foot french door Whirlpool refrigerator. Ice maker is a solid performer, with nary an issue. Temperature controls work flawlessly. The black frame looks great in our kitchen with espresso color cabinets.

I recently purchased a Whirlpool Slide in Oven replacing my Amana stove of 15 years. My Amana was a very basic model, and I thought this WP was an upgrade. But it is so poorly made its ridiculous. First of all the bottom storage drawer, is so flimsy, it does not slide out easily, and the top lip doesnt even have a finished edge. Additionally there is a 1 inch gap between the top of the drawer and the bottom of the stove door. But the BIGGEST disappointment was the oven racks, totally flimsy.We used a Lodge Dutch Oven (which we have used many times with our old stove) and the oven rack sagged under the weight. Had I known I would have pulled the racks from my old stove. I contacted that seller about these issues, and they said they are ALL like that even the higher end ones, and I contacted Whirlpool to see if I could buy better quality racks and they said no, this is all they have.

Bought a Whirlpool Refrigerator Gold Series on 11/04/2014. It stop working on 6/25/2014 when I called customer service to report the problem. Received the visit of 2 serviceman on 3 different occasions and still dont know when the refrigerator will be fixed. What should I do?

We purchased a Whirlpool dryer about two years ago. Unfortunately I havent had the time to compose a letter stating my dis-satisfaction until now. After much research and haggling we decided on the Whirlpool Cabrio Platinum model, a very efficient (we thought), and even attractive model. It has proven to cost us much more than we bargained for, as EVERY time I do a dark wash, which is usually two to three times a week I must re-wash the items once or twice after! All of the items come out of the wash with white spots all over. Thinking it is soap, I run the wash again on a rinse cycle: nothing changes. Then I redo the wash - this time not using soap. The result is a bit better, but I still have to take a wet washcloth and rub the areas out.I did voice a complaint one time to which I received a letter stating that I should read my manual, specifically the troubleshooting guide. I dont have time for this. Again, we purchased this machine for its cost and efficiency, yet its ending up costing much more than it should as for every load I do (of dark clothes), I have to do one or two additional. (No telling what is on the light or white clothes that I cannot see because of their color!) This machine has been a total waste of time and money; I will never purchase another Whirlpool machine as I am extremely dissatisfied with this product.

Whirlpool fridge still freezes water in the bottom of freezer... after five service attempts. We purchased a five-year warranty and so far, they claim that as long as the warranty is good, they will continue to warranty it. We now have three and a half years left. We have currently owned our refrigerator for just over a year (approx. 18 months). During this time, it has had the same warranty repair issue that has been serviced five times so far. We now have an appointment for a sixth time since RC Willey does not want to fix a lemon the right way. The first three warranty repairs were under the manufacturers warranty. We are now under a warranty (extended) that was purchased from the place we bought the fridge from, RC Willey.I want my money back on the whole deal. I was going to be civilized about it because I thought they were common sense decent place to buy from. I thought they would, through common sense, realize that this unit is a lemon and allow credit towards another fridge. In just the past two years, we have bought from RC Willey over $10,000 worth of flooring, appliances, etc. and thats not counting previous years.

It was on sale and the price was good for comparable refrigerators. The biggest problem is that instead of a simple dial to control temperature, you have to be a computer genius to figure out how to turn it to a different temp. even by the instructions. And the ice maker throws ice all over the floor even if you hold the glass up against the top. When I first got it, it made a very loud noise when it run, but that changed with time to a bearable volume. Everything seems to work well other than those few little things.

Bought Whirlpool electric range in Dec. 2005..expensive..so the warranty expired a few months ago. The electronic keypad that controls the oven and lights doesnt work. The repairs will be $408 plus tax which is obscene, and are guaranteed only for 90 days.This after only 5 years of minimal use...just me using it.I will never buy whirlpool again.

I bought this washer (Whirlpool Cabrio) about 4 years ago. A year or so later, it started leaking; based on reading the troubleshooting guide we found that this was because the feet would continually get out of balance. After painstakingly re-leveling the washer every 6 months or so the washer now consistently leaks - even though its balanced/level! $508 to repair a machine I paid $787 for. No thanks. I agree too with the other reports that it doesnt get clothes clean. I just figured this was a feature those of us got for trying to be energy efficient.

After being a faithful Whirlpool consumer for years... I no longer have any faith. I purchased an entire kitchen suite. The side by side refrigerator Nov 2013. The first refrigerator was delivered with the side cabinet deeply dented in several areas. Another was delivered 4 weeks later. Silly me... I thought, Okay, no big deal... what could go wrong? I didnt take time off work again to receive the replacement. My son took delivery (never looked at it). I get home... the front of both doors looked like they had been kicked in all the way across! To add, the cabinet sides were textured (not smooth like what I ordered) and the door handles didnt match the other appliances. So, I called HDepot & called Whirlpool (only to be on the phone an hour each time due to high call volume. Imagine?). Then Whirlpool reps are talking to me like I am some sort of idiot... saying that the refrigerator was EXACTLY the same... not possible that the handles or sides were different!!! Because it was damaged (and I mean ridiculous! ) another 8 weeks for a replacement. Frig #3 arrives and I take time off to receive it. Ah, the right refrigerator... but again ~ handles dont match. Not POSSIBLE.. Ms. _ _ _ _... it is the exact refrigerator, those are the same handles. Hours and hours on the phone to HDepot and Whirlpool. Finally, HDepot rep has a WP rep at the store when I call, and bingo! Oh yes, there are two styles of the Exact same model. The handles are ordered... 10 weeks later I finally have matching handles! But, wait... gets better. The fridge has been loud from the start, CONSTANTLY running but, not cooling some areas and freezing in others. Then when you open the freezer it is like a burst of winter wonderland is unleashed in your face. There are sheaths of ice building up on the top of the inside door. Hmm, I think what is going on? The Whirlpool designated repair company comes out. Ah, well here is part of your problem. When the refrigerator was being put together they left a few thicknesses of blue packing tape between the door and the rubber seal in the freezer. The rep tried to fix it to no avail because the door was also warped. First they were going to replace the door. Waiting for another 10 weeks. Nobody calls, whats going on? Oh, never mind, or rather... that was never happening. I have spoken to many reps with Whirlpool, I have been polite with all. In turn, from most I get curt hard ball back. The offers to resolve this from Whirlpool have been ridiculous. I am sorry for my loyalty to Whirlpool, as it has not been reciprocated. I have had two more deliveries - both the wrong unit! I never thought there were others out there. What a mess. They should recall.

I have always like the Whirlpool brand in general. It is a well known company and the products have always been of quality. I will say that recently I discovered that Whirlpool will only allow their own technicians to work on more current washers and driers and that is concerning since I have always used a technician I know and trust.

This dishwasher is disappointing. Very noisy. Water consuming, and does not clean dishes properly. In addition not much options with timing settings. There are just few setting options and each take long time.

Second time in 3 years our freezer/fridge has gone out. Same symptoms as last time, which was a bad motor. Repaired BY WHIRLPOOL. Completely useless. I don’t expect to have to replace a refrigerator every three years. Especially when I paid $$$$ for it to begin with. DO NOT BUY!! We will be switching brands. And as the installed items in our house start to go (yeah, they’ve already had to service an oven installed at the same time 3 years ago too) they too will be replaced with other brands. You’ve lost a lifetime customer! Shame on you Whirlpool.

I am so frustrated with my Whirlpool Gold Wall oven with Accubake system. It has been on for 12 hours in clean mode. The door is locked. My home is full of smoke and even though I turned off the breaker so no power would go to it, it is still locked and hot two hours later. This is the second time this has happened. Not only is it a fire hazard, my walls are hot to the touch. It is frustrating. There is no override of the clean mode. BTW, I was baking when the inside light switched on and off and the door locked down. I was nowhere near it and it was the second batch I was baking so I did not touch the clean button. It did it itself.

Bought this washer in May of 2019: Whirlpool - Whirlpool - 4.5 Cu. Ft. 37-Cycle High-Efficiency Front-Loading Washer with Steam and Load & Go™ XL Dispenser - Chrome Shadow. Model: WFW6620HC. SKU: 6313774. Paid over $1,000.00 for it. FIRST TIME washing our sheets, we had snags & rips. I immediately called and was referred to Whirlpool and then referred to an outside repair company. They sent a technician out who said everything was functioning properly despite having ruined 3 sets of sheets (these were not all washed at the same time & I didn’t realize they were being snagged until making the beds).I continued to use the washer - clothes were fine, but yet again, MORE sheets and now comforters RUINED!!!! I called YET AGAIN after troubleshooting the problem myself and finding that the drain holes in the drum had metal pieces sticking up causing the items to snag & rip. Another day taken off work to stay home for the repair. The repair guy comes out, the part was broken. So now I’m left once again with a faulty washing machine AND no ETA on when the new part will arrive and be installed AND having to take yet another day off work.7 sheet sets, 3 comforters, multiple shirts, & multiple bathing suits RUINED & was told there was ‘nothing they could do!’ I will NEVER EVER AGAIN purchase anything with the Whirlpool logo. It’s JUNK! Just an FYI, this was initiated in May of 2019 and it is now the middle of September 2019 with no fix updates. Who can go months without doing laundry???? Once again, poor customer service and JUNK of a product!

I purchased a Whirlpool fridge in September of 2015. In March of 2016 I noticed the Fridge portion was getting too cold. By April 2016 the freezer stopped freezing and fridge started warming up. I reported the issue to Whirlpool and made an appointment. The day of the appointment the first company called and their tech couldnt make it because of a family emergency. They sent another company out instead. That company diagnosed the issue as a faulty chiller and ordered the part and told me they would be in touch. A week goes by with no working fridge and I call them. They say it will be another week for the parts. Two weeks go by - no call. I call them and they say they have the parts and I make an appointment.The day of the appointment I call them to find out what time they will be out and they tell me they dont have all the parts. And when I mention that I have been without a fridge and that I am frustrated that they arent calling me and that I am having to call them back the lady starts yelling at me asking me if I want to cancel my appointment. So I call Whirlpool and ask for another company. They send a company out that is not trained to be working on a sealed unit. So I call Whirlpool back again and they send an in house tech out three days later. This is over about a month without a fridge at this point. Their tech simply recharges the system and says that it should be fine.A week later the freezer stops freezing and the fridge warms up to the point that both are not usable. The tech comes out and diagnoses that there it is most likely the chiller because of a build up of frost in the freezer. Orders the part and a week and a bit later I call Whirlpool up to get an ETA on the parts. They say they have the parts now (no call??) and they schedule an appointment. The tech comes out and puts the part in almost a week later (2 months now) and says that it is still building up frost in an area that it shouldnt and calls tech support back and forth for the next two hours. He leaves saying give it some time to see if it works, but admits to me that it is likely it is leaking in an area that he cant access.So I call up Whirlpool and explain the situation and ask for a new Fridge. It has been two months and the tech by his own admission could not say he fixed the problem and thought the problem maybe somewhere else. After looking at my case and me being on hold back and forth for about a half hour the supervisor says that at this time I need to wait to see if it fails again. And that if it does I need to have a tech back on site to verify. So this will be the seventh time I took time off work, it will be the fourth time the fridge fails and that I will have to throw out groceries. When is enough enough. I am into this now for almost double what the fridge is worth in lost wages and groceries.Do yourself a favour and stay away from Whirlpool!!! If I have to guess the following will happen: five days from now the fridge will stop working again (when the Freon leaks out - same timeline as previously) and then I have to call for a tech (3-4 days) and the tech will come out, determine that it isnt working. I have another conversation with a supervisor asking for a new fridge and they miraculously agree (yeah I know). Then what two weeks, a month... before I get a new fridge. I anticipate that I will have been without a fridge for 3 months before it is all resolved. Ridiculous is all I can say. Whirlpool should be embarrassed.

After 2-1/2 years we started having trouble with the spin cycle on our Maytag washer. We live in an area with no repairman. Whirlpool want us to pay just to talk to us. Now the timings off. It will not spin out.

We recently bought a home and our dishwasher came with the home. We saw our basement leaking and got 2 plumbers come over and check the pipes out, paying almost $600, only to realize that the leak was actually from the broken plastic in our dishwasher, and not any pipe. When we called the Customer Service to get it replaced as it comes with a 20 year warranty on the plastic body, they said they would replace the part, but I would have to pay $81 for the first 15 min & $19 every additional 15 min. for labor, which means I would end up paying at least close to $400 or more, depending on how long the technician takes to replace the fiber body. Neither their policy nor warranty make any sense to me. Its frustrating to see that in spite of being covered, I would be the one paying money out of my pocket.

We purchased our side by side refrigerator from Lowes. When it was delivered, we noticed the freezer door was rubbing on the ice maker and would not close properly. The refrigerator was replaced. Then about 10 months later, the water dispenser stopped working. Service came out and said the water line had ice in it (we do not keep the freezer on high). They replaced the water line in the door. About 6 months later, after the unit was out of warranty, the same thing happened. We called Whirlpool and they said there was nothing they could do, because the unit was out of warranty. I cleaned out the water line tubing myself and the unit worked again, but the problem occurred again several months later and it does not seem right that the water dispenser line should keep freezing up. In addition, every two months we have to take the ice maker apart because the ice will no longer dispense because of an ice buildup in the ice cube container. We used to think that Whirlpool made reliable products, but with these problems and Whirlpools unwillingness to correct the problem, we will never buy their products again. They have lost a long time customer because of their products now and their customer support.

Weve had this microwave (WMH31017AW-2) for 2 1/2 yrs and the door is falling apart. It started with one crack and now the middle glass of the door is falling out! I took the door off so the the glass wouldnt fall on the stove and the plastic around the door literally crumbled apart. So disappointed since that was the same reason we took the other one back that was in this house when we bought it. The microwave is now discontinued and when I did find a door online it costs as much as the microwave! Whirlpool doesnt distribute the dependable products that were, back in the day, associated with the name WHIRLPOOL. Shame on the greedy people who have taken over and cut back on quality material and labor to put an extra penny in their pocket!

Less than 2 years old; a loud chirp began and the water dispenser stopped working, along with the ice. Repairman came out--ordered a part. One week later another repairman; another part. One week later another repairman--couldnt fix the problem. By now no cooling in the refrigerator at all. Tech line has to review the findings. Have heard nothing after nearly 3 weeks without a fridge, ruined food, and no ice other than my back yard!

Our new Maytag (i.e. owned by Whirlpool) oven/range is a stainless steel pile of junk. It takes FOREVER to pre-heat. The range elements take FOREVER to heat up. And like others on here, the Aqua Lift cleaning simply does not work. We put the oven through 3 back-to-back cycles and only the bottom gets a little clean. What a scam.

I purchased the washer 1.5 years ago. At about 9 months, the latch was in need of replacing. The washer was locked and would not unlock. That was fixed. Fast forward to 1.5 years old and the control board needs replacing. The washer stopped in the midst of a cycle, filled with water. The repairs are over $400 -- nearly the price of a new washer. Ive never had a washer to go out on me. I willingly gave away my previous washer for the purchase of a newer model and did not expect this fiasco. I will recommend against purchasing a Whirlpool washer.

In 2008, we also bought a Whirlpool 40 gallon gas hot water heater with flame lock, Model #BFG14040T3NOV. We too purchased from Lowes. The plumber was here yesterday to replace the thermostat for the third time in 4 years. We also suffered through cold showers, warming water for dishes and sponge baths. We are in our 60s and are worn out arguing with these people. If there should be a class action law suit, you can count us in. It is not right to have such a faulty product out there by Whirlpool. This is still America, right?

Appliance repairman is coming tomorrow. Washer is less than 2 years old and will stop mid-cycle more than once (I re-start it)... At first when I thought the cycle was done I would get ready to move the clothes to the dryer and realize they were all soapy and sometimes they were just massively soaked so something is not working right. Sensor?? Hopefully not the computer panel as that will be too expensive to repair.

I actually need help, we have had our over the stove microwave for two years, for the last 8 months it has inconsistently worked. We have to wait for the light to come on before it will come on and here lately, I have push on it to get it to work. This happens daily. Does anyone have any suggestions, I would hate to have to replace a two year old microwave.

Model WMH1164XWS-3 Microwave - I purchased a brand new home in 2012 with all stainless appliances, within 3-5 months the outside door handle where it attaches at top and bottom of microwave has chipped, so that the screws are shown. I havent had the time to look up the replacement part until just now. Very disappointed in the amount of money a handle only cost.

I have never had such a horrible experience in my life as I have with Whirlpool. Refrigerator ($2,500) broke within three months, and then broke again another two months later and hasn’t worked right since. They have the most horrible customer service, parts are on back order, I’ve had to throw away hundreds of dollars worth of food because everything keeps freezing but they do not care. Ice machine has been broken for over a month for the second time. They are the worst company I’ve ever dealt with. Buyer beware. Do not buy anything from this company. Their products are the worst and they have zero customer service. Good luck if you buy something and it breaks. You might as well just buy a completely new appliance.

After 7 calls to Whirlpool and 3 service calls, we still have white detergent stains on all our clothes. Today Whirlpool told us we needed to put one item at a time into the machine. Not only that, but pants needed to be loaded waist band up and gently placed; Shirts, collars up; socks toes down, etc. etc. Are these folks at Whirlpool serious?? So today, we called them back - still streaks. The folks at Whirlpool want us to take and send them pictures of our clothes. This is ridiculous.

I purchased my Cabrio a little over three years ago. Within the first month, the computer board had to be replaced and the tech informed me that it was not a malfunction in the unit; rather, it was because I did not have a sock bag for my socks and panties. I replaced the board, bought a sock bag and had no problems for about 1.5 years. A little over a year ago, the un-level started. I did research and found that I needed to replace the rods and add couplers as they were not thought of when the unit was created. This worked for an entire month. Now, I am in the same position again. It takes about 6 tries per load and the amount of water I am using is increasing with each failed attempt to wash. There should be a recall on this product. I notice there are many other complaints that match my frustrations exactly.

On December 21, it became clear that I needed to replace our 13-year old Rheem water heater. We decided to buy one from Lowes, 36 miles away and have a handy man install it. He installed the new Whirlpool 50 gal gas water heater with a 12-year warranty on Friday, the 22nd, but could not get it to stay lit. He called Whirlpool to troubleshoot. They said it could be one of two parts and that they would ship the parts on the Monday after Christmas. He asked who would install and they recommended a local plumber. He called that plumber but they indicated they did not do Whirlpool warranty work and would have to charge.On Monday, I called Whirlpool and was assured the parts would be shipped that day for overnight delivery. I confronted them about the local plumber not doing their warranty work so they set up an appointment with a company called A&E for Wednesday morning. On Tuesday morning, I called Whirlpool to get the tracking number on the parts and was told that they did not get shipped on Monday as promised but would be shipped that day, arriving by the end of the day Wednesday, too late for the appointment for installation.By Tuesday night, my wife got on this site and was appalled to read the numerous identical complaints. I decided that Wednesday morning that I would hire a plumber to remove the Whirlpool and install another so we would not have a lifetime of problems from Whirlpool. The plumber installed a different water heater. It started right up and we have had no problems since. I got an R or RA number from Whirlpool which I think they only gave me because the parts had not arrived on time and I returned the piece of ** to Lowes for a refund. Lowes has a seven-day return policy of these.

We purchased 2 Whirlpool Cabrio washing machines in 2011. Both required service calls in June 2015. After 3.5 years, the repair company diagnosed that the Whirlpool Cabrio model number WTW7800XW2 bearing needed to be replaced for an estimated $650.00 and recommended that we purchase a new machine. The other machine was spewing water out of the side of the machine. The repair person took the machine apart and could not duplicate the problem.

It was not a good experience after I purchased a Whirlpool washer in Feb 2014. I have been going to Laundromat 5 months since I found the door did not able to secure. I reported in January 2015 and technicians from 3 different contractors made more than 10 visits for checking and replacing parts. Not only nothing gets done, I also missed work for all these days. Then I escalated to the Supervisor, ** and Miss ** in Executive Office of North American Region. Both of them are very nice that they understand the situation and how frustrate it is. Finally, ** said Whirlpool would replace it. ** told me that I should get phone call from H.H. Gregg within 48 hours. However, it has been two weeks and seems no one care. In this three days memorial weekend, I still need to go to Laundromat while they are enjoying BBQ with their friends and families. I dont know how long it take to replace it.

I have the same lid closure issue expressed by many consumers and whirlpool refuses to acknowledge this as an issue, only recommends purchasing a new lid at $225. Lid design is flawed, metal L bracket connects to plastic housing/trim/side of lid, causing glass to pop out and stress cracks between screws. New models of same washer have redesigned lid, no cross reference part number or dimensions listed to determine if new lid will fit.

Never worked proper form the start, always condensation, bottom froze and top unthawed and vice versa. No help from store or company. During any temp change the fresh food would freeze and top unfreeze and no matter how long you waited and changed settings. Junk.

Washer is not worth the cost. After 4th year of use in a two person household the washer bearings are gone and require replacement. The washer sounds like an airplane. I was told based on my description of the issue that the water has leaked due to washing and spinning into the bearing assembly and has caused it to have friction. The Whirlpool warranty is just as costly as the machine.

I have a Whirlpool stove. Theres nothing but problems with the oven sensor. This is the 3rd time we have to replace it. It had problems ever since I bought and thats been 11 years ago. My Magic Chef lasted 13 years with no problems. I have a Whirlpool microwave that had a recall on it. Never buy Whirlpool!

After reading all the reviews about the Whirlpool Cabrio washing machine, all I can say its just a piece of junk. We have replaced the agitator 3 times at $80.00 each, not including labor. Our clothes are never cleaned properly and it always seems to be out of balance. I will never purchase another Whirlpool product.