I own a Cabrio Whirlpool washer. It already had several repairs and never got my wash clean. I complained to the company, no results. This washer is not even a year old. Why will they not stand behind their products?

I have had my Whirlpool dishwasher for 8 years..I cant use the top rack anymore as it doesnt clean dishes!! I bought a brand new one for my cabin..I hope it works longer (right now it cleans amazing).

I purchased a Whirlpool refrigerator less than a year ago and both the door and icemaker have a problem in which PC Richards, the store I purchased it from, has had to service the refrigerator at least 3 times and have not resolved the problem. The door does not close properly and every time I use the icemaker, condensation builds up. Each time a tech person comes to my home, a different reason is given. I need this problem resolved. I dont need to monitor the refrigerator like a sick patient.

Whirlpool Duet - Steam cycle and sanitize on wash. Dryer is fast and automatic cycles actually work! Have had the washer 4 years and the dryer over 10. We like the Duet Washer because it had a steam cycle and a sanitize cycle plus it has a light inside that helps us see the laundry in our dark room or at night. Also we have been very happy with the cleaning - does a great job and gets the dirtiest clothes clean. The Fan Fresh feature and Delay Start are very handy especially for busy parents who may forget the laundry is in the washer.

Its a piece of junk. The only time it will finish a wash and spin dry is when it is empty. Otherwise, it stops and lists an unbalanced error code. I opened up the service panels and found no broken hangers or clothes. There’s no way to bypass the system. I have read of similar issues and of course, its just out of warranty. I assumed the warranty was like other brands but it’s much shorter. What to do? Purchase a washer with dials and not a brain; it will last years. Note that the models without a brain cost far less.

I purchased the Whirlpool Duet washing machine October 2010. When I first got the washing machine, it shook the house (new stick built house) when it was on the spin cycle. They had a repair man come out to tell me that there was nothing wrong with it, it was fine as it was. We thought it was ridiculous, but we are young and didnt know better. He also told us we should fill up the washing machine more than what we where because the clothes wash better when its packed. Big mistake on our behalf! The washing machine has ate thousands of dollars worth of clothing. We did what we where told, so we thought we were doing something wrong. Little did we know we were doing nothing wrong. It was the machine. Then a sock found its way to the drainage field which let water pour out of the washing machine throughout the laundry room and going to the rest of the house. What a mess. We called and they found the problem and removed the sock. Still didnt fix the damaged clothing issue. I called them 1 year and 7 days after we got it and Whirlpool still wont cover their product. They said they where sorry they couldnt help. Well couldnt and wont are two separate things. Its a shame they wont stand behind their product after I bought over $6,000 appliances from them. You think theyd be a little more compassionate to their customers after spending that much money? Now you know how they treat their customers. Dont buy Whirlpool. They (Whirlpool, Maytag, etc. ) are maybe cheaper than their competitors, but its probably worth the extra money if you know theyll stand behind their product. Very unhappy customer!

I am somewhat satisfied with my induction range. We ordered it just before Thanksgiving from Lowe’s a year and a half ago. We were told that we would have it before Christmas, which was fine with me. I don’t cook for Thanksgiving. Just a lot of Christmas baking. It turned out that Whirlpool had not started making our range until January and it wasn’t delivered until mid-January. It had been really good until about a month ago, when it blew the circuit breaker. My husband was cooking dinner while I was at work and it just blew the circuit breaker. No power surge in the rest of the house. No other circuit breakers affected. When the power was turned back on, two burners were out. As it turns out, the main circuit board is dead. So now the one large burner, a small burner and the ovens don’t work. There are two circuit boards for each oven. When it is working, it is a great stove. However when it doesn’t work, it is costly and takes a while to get repaired.

Bought the Cabrio washer dryer set back on 1-12-13 for my new home and thought it was a good purchase. Well now its March on 2017 and the washer has been slowly getting louder during spin cycle to the point where yup you guessed it the bearing is bad because on a cheap seal that suppose to keep water out. It just cost me just under $600 to get the repair done and from reading other reviews and the fact that I have worked on cars and machines at my employment this will happen again. I wanted to save money on water for the city that I live in charges gold prices per cubic units of water but for the price of repairs to the water saved I am in the red. So once it goes again going back to conventional unit and will never buy anything from this company again. I work in the second largest printing company in the world for 28 years on press and know a bit about quality workmanship. Its really sort of typical on how over the years some good manufacturers cut quality and design in planned obsolescence into their product just to make money for the useless corporate bloat that has taken over. I made the mistake in buying what I thought was a good product from a great company but they just proved me wrong. People do not buy any products from this manufacture and find out what other unit they make and steer away from them too.

Bought the oven Model RBS275PRS 7 years ago. Since then door handle broke 4 times! Control panel had to be replaced once. Paid $750. Spent over $500 in repair. Now handle broke again but part discontinued. Can throw the oven away...

I purchased a new gas water heater and had it installed by a plumber. It worked for 3 weeks then we lost hot water. I called the 877 number and got shoveled around to 3 or 4 people. I got hung up on twice then spent 45 minutes repeating all the instructions that are on the tank to relight the pilot light. They agreed to send a new valve. The first time, I never received the valve (after 10 days) and had to call back. The second time I called in, I spent 20 minutes trying to get another valve sent. The valve I, finally, received had plumbers dope on the back and clearly was previously used. Had the original plumber replace the faulty valve? And lo and behold, the second valve didnt work either. I have no idea why a gas water heater would have any issues after 3 weeks. I bought it brand new from Lowe’s. It is obvious that Whirlpool makes shoddy products. They have very poor customer service and care little for the customers’ time either in correcting the problem or being without hot water. I have spent over 2 hours with Whirlpool. Only to 3 weeks after the initial call, I still do not have hot water from a heater that is less than 2 months old! I called them on the issue of the second valve not working and they put me on hold (after 10 minutes the line went dead and I was disconnected) despite the fact I asked them not to do that!

Whirlpool Washer WTW8700EC + Dryer WGD8700EC. Bought to replace a 35-year-old Whirlpool set that is still working and had no repairs in that 35 years of ownership. Gave to family member and its working well. Was not a cheap item but well worth the money. It performs beautifully. I chose Whirlpool. It is a proven brand with a long history of reliability. When I bought my last Whirlpool, I bought the top of the line model washer and dryer. They say you get what you pay for and that holds true in my case as has with many others who believe it! So this time I did the same thing and bought the best top loader they had. It has many options I still need to learn. I just use it like the old machine and dont need to worry about types of fabrics or making mistakes. Just follow the instructions for detergent and softeners and all is good. This machine cleans as great as the old one without beating the clothes to death. New agitator design keeps from paddling the clothes, so I dont need to use the gentle cycle or medium to preserve the clothes. The dryer I can say is most efficient as I noticed it took far less time to dry, and notice a small drop in my electric bill and gas bill. I think this will be my last machine ever needed. I do take care of my things and I do clean and polish my machines, they are an investment like a car or house. Front loaders have a lot of problems with leaks from the doors. Will stick with top load only!

Whirlpool fridge with ice and water dispenser that broke down within days of install. The water dispenser stopped working after the first flush and Whirlpool were notified. They engaged a useless repair company who have been unable to resolve the problem and will not communicate updates. Whirlpool have been fully informed of the problem with their brand new product which was defective practically from the start and have washed their hands of any involvement in resolving the problem with their appliance. They defer defective product as a warranty issue and leave the consumer to chase after people to get a repair done. For a brand new $3,700 fridge that doesnt work within a week of install I just cannot believe they would sell a defective item and make their consumer suffer for it.What consumer would knowingly choose to purchase a defective appliance? If you end up getting a defect, the company should make it right....right away. Im at 2 months now without a functioning water dispenser on a fridge that is only 2 months old. Just disgusting.

Purchased a Whirlpool double door refrigerator and within a year the freezer and refrigerator doors were severely out of line. Called repairman who said the risers were broken, they were plastic and needed to be replaced. We did that. The doors were again out of line so badly that you had to push the refrigerator door side hard to get it to close. Repairman came today and stated he would recommend ditching the refrigerator as the risers in the bottom of the refrigerator are made of plastic and will continue to break. He leveled the doors but stated that they will continue to become out of line again.The repairman stated that this is a design defect in the Whirlpool refrigerator and he has replaced the risers in many of the refrigerators repeatedly. As if the refrigerator isnt enough, we own a Whirlpool Duet Washer and Dryer. Within 3 1/2 yrs the motherboard went bad in the washer and we had to replace it. The part and labor was almost $400. Whirlpool considered us a valued customer and offered us a comparable washer for $500 and they would take ours away for $20 extra. Only problem is that our original washer was $1,000 and the comparable was not as large as the one we had and did not have the stainless ours had.All I can say is if were valued customers I would wonder how they treat their less valued customers. All of this is to say that I will no longer purchase any Whirlpool products. Not only are the products below par but the customer service is non existent. They really do not care if they lose customers or not. They dont want to hear your woes about their appliances.

I purchased Whirlpool Refrigerator model WRF989SDAM02 in June of 2014. I began having problems with the ice forming into a solid block shortly after having the refrigerator installed. I called for service several times over the next year trying to rectify the problem. Once the warranty had expired I continued upon the advice of Whirlpool Customer Service to schedule their certified Technicians to work on the problem. A year and a half and several hundred dollars later I am still unable to get ice cubes when desired.Ultimately I was advised that I would need to use the ice maker once a day to keep it from forming into a block. When this didnt solve the problem I again contacted Whirlpool, had another of their recommended service technician come and give his advice. I was told that the ice maker needs to be in constant use or it forms a block and this is a defect in the design of this unit. A Pro Tech Appliance Inc. Technician, an authorized Whirlpool technical representative, said the only way to have usage of ice would be if I made sure to dispense ice a minimum of 8-10 times a day.This is completely impractical and just plain ridiculous. I contacted Whirlpool again. They refuse to acknowledge this is a defect in the design of this model. I have replaced all parts that can be replaced, had the unit resealed and have paid for multiple service call. Whirlpool will provide no remedy for this problem. Now that the unit is out of warranty they have refused to provide a resolution even though its issue began while still covered under the year warranty. The ice in the ice maker is completely unusable and melts into a solid block within 24 hours if not in continual use.

Cabrio washer - I have always had a Whirlpool appliances and have always been satisfied with them, but this is the worst washer ever manufactured. I bought it to wash heavy loads of jeans and it takes me all day to wash 1 load because it is always out of balance. No matter what setting I put it on I have to keep rearranging the load. Without putting up with that, the load takes 87 minutes on bulky wash. That is far too long and then you add all the time I spend rearranging it to get it to work. I think there should be a recall or at least admit you have a poor design. My son works for Whirlpool, but Im not sure I will be supporting this company again.

Whirlpool Washing Machine Model WTW4950XW2: I am 74-1/2 years old and I have been doing laundry for more than 50 years. We have always purchased washers of a brand made by Whirlpool. Until now Ive had nothing but the highest of praise. Two months ago, our washer stopped working and we had to shop for another. After looking at all types and brands of washers, we found out that the only type without an agitator was available. With that choice, we ended up buying the model stated above. I literally hate the way these washers pretend to wash clothes! I apply the detergent properly, place the clothes perfectly around the outer part of the tub, etc., and because there is not enough water that goes into the tub for the clothes to wash even one pair of socks, let alone a full load of clothes, I use the 2nd rinse trying to help matters although it doesnt. I dont care about the amount of the water I use to have clean clothes! The clothes sit in there just rubbing against one another, and then when they are finished, the clothes are so tangled you can hardly get them out of washer and into the dryer! Perhaps the designers of all these current washers think they are saving water, but I can tell you that sometimes I will wash mine twice as I know that I do not feel they are clean! (And I am a clean person and the clothes are not real dirty!) I am so unhappy with the decision of purchasing this horrible excuse for a washer that I could shoot myself. I will discourage every person I know from buying one. I will tell them to have their old washer repaired as many times as possible so they will have clean clothes! It isnt just Whirlpool, but all the manufacturers who have chosen to make this horrible decision for us, housewives, and anyone else who does the laundry where they live. I used to enjoy doing my laundry, but now it is a nightmare. I will tell my friends who are the same age as I am that if they can still find a machine with an agitator to buy 1 or two of them so they wont have to deal with this type of problem for the rest of their lives. I realize that now I have to eat this washer since I have purchased it, but I can tell you one thing; if I could sell it for near the price I paid for it, I would do it in a heartbeat! Realizing whoever reads this; it wont matter one bit and probably will never reach the hands of the ones who couldn’t care less or do something about it, but at least I have made an attempt to help others in the future.

Had to return my first 2019 purchase due to refrigerator freezing food and imbalanced top doors. I was unable to get straight answers from Whirlpool and so the mgr at BB gave exchange same problems except door not as off. Cheap product make/model. A class action lawsuit from 2016 has occurred and the company continues to distribute the same issues in their new make/model.

Freezer froze up and water runs into refrigerator part. I am 80 years old and have never had any problems with any of my ref (except ice makers) before, but I have never owned a Whirlpool ref before. We have purchased Sears chest type deep freezers without any problems and have been very satisfied with freezers. This frig/freezer is a real bummer.

We have front loaders. Far, far less damaging to the clothing than a top loader with agitator, would never go back to top loader. That comes with a caveat though. There is a difference you may not realize between the two styles. With a front loader comes a little maintenance. You will need to clean the washer periodically. Most all the stores sell the cleaning tablets and no, not all cleaners are created equal. I will only use Affresh after testing most of them. With a front loader there is always some water in the bottom of the drum, even after the cycle ends and even when it looks empty. So if you wash real dirty or smelly things, you’ll want to run an empty cycle to rinse out that leftover water or run with cleaner.In between wash days you’ll need to leave the door open so it doesn’t mold or mildew. The door gasket/seals will show mold and mildew and or you’ll get a mildew smell in your clothing. The only issues we’ve had with these units were the learning curve on front loaders in general and with the dryer we had the water valve for the steam function stick open (after 5 years) but it was due to calcium build up from our well water, not a issue with the machine itself.The dryer lint screen could be better. It is vertical so as the lint builds up during a cycle it drops to the bottom and accumulated at the bottom falling off as you pull it out each time to clean it. The lint catches on a crazy amount of extrusions inside the lint trap which also makes it nearly impossible to get down in and effectively clean all the crap out. One last thing if youre changing from top to front loaders. Buy the peristalsis, they’re expensive but it’s a pain in the butt to get stuff out if you don’t have them. Overall we’ve been very happy with our Whirlpool front loaders and would confidently recommend them to you.

Buyers beware! I have had the Cabrio top loader washing machine for less than 18 months and it is already giving me problems. During the wash cycle, it sounds as though the gears are grinding to the point it wakes my family up two floors up! The spin cycle is a joke. The washer sounds as though it is going to spin off into another room! When I called Whirlpool, they told me to shut the circuit breaker. That might reset the computer. No go which I figured as much. I have had washers that lasted 10 plus years with no problems. It is not worth your time or your money. Never again, Whirlpool!

Sounding like a broken record, this washer is such a disappointment! I had high hopes for this top loader and thought I did enough research. Bought a Cabrio in Oct 2016 and have never liked it. They will have you believe it’s your fault... the wrinkly clothes, the clothes not clean enough, the white marks over all your clothes... you can’t change your detergent or softener enough and change the amount enough... it will still be there. So disappointed??? Want my front loader back!

Bought a new Whirlpool range in 10/20. In 06/21 the control panel stopped working. Now they say the necessary part will not be available until 10/21! 5 months without a working range! Dont buy Whirlpool--shoddy products and terrible customer service.

Cabrio washer Model # wtw5840bw - I purchased this washer one year ago. It has a defect that comes along with it. You think your clothes are getting clean. But in reality they are not. This washer does not fill enough water to wash a small load of clothes. It has ruined three large bags of my clothes. Stained they smell in general they are not clean. Worst washer I have ever bought. General public Please be aware of this issue if you are going to purchase this washer. It is a big expense to be put out to the curb.

Purchased brand new washer & dryer that was chosen specifically for its HE & washing capabilities as Im a single mom with 5 kids, 2 of whom have disabilities, & I need a good washer & dryer. Washer and dryer both broke several times. I paid for an extended warranty but they never resolved the issue. Called Whirlpool & they didnt care. Four years later, Im using a set I bought used that rips my clothes while the washer & dryer sit still broken. Will never buy from Whirlpool or Kettles again.

If I could give half a star, I would. I purchased a Whirlpool dishwasher. Once installed, it leaked immediately. Thinking it is best to call Whirlpool for repairs under warranty, they decided to send out a technician from A&E Factory Repair. This is where the service sucks.A&E needed me to wait about 2 weeks for the first available appointment for service. When the technician arrived and pulled out the dishwasher, he told me that he would not repair it because he didnt like where the hose was installed through the cabinet. He insisted that only after the hose was moved, they would return to fix the leak if it was still an issue.Of course, the hose was then moved and the machine still leaks. So, I called A&E back to schedule another service call. I was again told that the next available service call was 2 weeks out.Now, the day before the service call, I receive a phone call from A&E, telling me that they have to reschedule the service call that is supposed to be for tomorrow. Once again, the earliest next available appointment is another week out.If it was now not past the original 30 days to be able to return the item to Lowes, I would have already done that. By the time the first A&E service call happened, it was already past the 30 days in which I could have returned it to Lowes.I will never purchase Whirlpool again simply because they use A&E service center.

Cabrio washer - This was a huge disappointment, clothes not clean, sometimes still dry in middle even with small loads! Have had washer just over a year, second time it has quit working! This time it wont even give a code to why it wont spin out! Living on a budget, I cant afford such a shoddy product! Never again will I buy any product associated with whirlpool!

Im 70 years old and always bought Whirlpool washing machines. My last one I bought at Lowes and it is the most Ive ever paid for a washer and its the worst Ive ever owned! Dont waste your money! Hard to get clothes balanced and it slams and bams like the old 1970 washing machines! Horrible!!!

I purchased a Whirlpool hot water gas heater with a six-year warranty. It only lasted three years. When I called for an RA#, I was told, Well, well send you a part after you get a plumber and pay for it. Meanwhile, there is water all over the cellar floor. I called again and was told the same thing. Two weeks of no hot water and no help from Whirlpool. I will never order anything Whirlpool ever again. They stink.

Despite my claim being submitted within the first 4 months of purchase, Whirlpool would not assist in solving our issue. We purchased all major appliances from Whirlpool, to furnish our new home in August 2021. All appliances were white. The top of our gas range began discolouring immediately following the first use. The inside of the four corners immediately began to ware due to heat. I figured Id have time to put my claim in, and thought to see if it got worse. Once I finally had time to deal with the issue, I contacted them only to find out that we only had 30 days from the date of purchase (of which included 3 months of waiting for the products to arrive) to claim the issue, given that it was considered Cosmetic. Easy fix, since theyd simply have to change the top of the stove, but Whirlpool denied our claim. Do not purchase this product, unless youre looking for a sub-standard product and customer service.

The drip hose had to be replaced 6 months after I purchased the refrigerator. At that time the warranty covered the part but the technician told me that Whirlpool was aware of the problem. About 5 months after the warranty expired, the same problem again - ice built up on bottom of freezer and water leaking out from the left side leaving a puddle on the floor. I called Whirlpool and they said warranty is expired. I tried to tell them about the defective part but to no avail. Had to pay to have drip hose replaced again. One year after that the main CPU board went and had to be replaced ($350.00). I sent the part back to Whirlpool, registered mail, hoping they would respond with a yes, this was defective. Their response back to me was, “warranty is over.” For a main board to fail in a $1500.00 refrigerator in less than 3 years was uncalled for. Two days ago I noticed the puddle on the floor and had to call in a technician and ONCE again the drip hose had to be replaced ($160.0). He told me Whirlpool is well aware of the problem and there is a Service Pointer out on it and the code is S38211. Thanks for nothing Whirlpool. The refrigerator was a lemon and you did nothing about it. I wish I would have read these reviews first. No more Whirlpool products for me! PS. I was a dedicated fan of Whirlpool for 40 years!

We purchased our new Whirlpool Cabrio washer on November 1, 2013. From the start this machines performance has been a disappointment. We bought the machine at The Brick (I should have known better) where we had made several purchases over the years ( I guess Im a slow learner). Right off the hop, my wife and I noticed that the clothes were not coming out clean. Even though the machine is Eco and therefore advertises that it uses less water, there should be enough water that the clothes at least get evenly wet. That may be a problem with the agitator not seeming to have the guts required to pull the clothing down to the bottom of the drum. We went back to The Brick and told them that we were not happy with the machine they had sold us and quite predictably they told us that we should call Whirlpool (This was less than a week after we had it delivered. Did I mention that I may be a slow learner?). We called Whirlpool and they told us they would have a tech out to take a look at it on November 11th. Wow, I thought. Hows that for service. A repair guy coming out on a statutory holiday. Of course it didnt happen. When we called them back to ask if their repair guy had made it home okay, they claimed that we werent there when the repairman tried to call to confirm his arrival time at our home. We hadnt left the nest the entire day. They then told us to go back to The Brick. We went back once again and told them, yet again, that we were not satisfied. This time they agreed to send their own man over to take a look. He came over yesterday and watched the machine go through an entire wash cycle and then said that there really wasnt anything he could do, as even though it may do a crappy job of washing the clothes, it at least appeared that mechanically speaking there didnt seem to be anything wrong with it. We called Whirlpool back today and they said that there isnt anything wrong with it mechanically so from their end, at least, the story is over. What kind of customer service is that????? Maybe Whirlpool and The Brick deserve each other, but I think we should get better treatment than that

We bought our house in December 2010 and the water heater (fg1f4034t3NOV) just started to give me fits. I had the same pilot light problems everyone else encountered. The person at the 877-251-1679 number gave me a good tip and that may have fixed the problem in the short-term. They told me theres a screen for venting on the bottom of the unit and to use a bottle brush after turning off the unit to clean the screen. I did this yesterday and the pilot light has stayed lit. I called the toll-free number and was told the water heater was out of warranty, but they could send me the part to fix the heater at half-price. I ordered it and they waived ground shipping. I hope to have the situation fixed soon. I’m very pleased with the level of service.

The Whirlpool engineers need to go back to design room sober on this machine. It is only a year old and still I have to run one load two sometimes three times just to get clothes clean. How is this energy-efficient? I have tried all of their so-called remedies. Paying such good money for a lousy and lazy appliance is hard to swallow!

Bought all Whirlpool appliances for my home and the dishwasher doesnt work right and all that they can tell me is its not even 7 months old. They dont have any repair technician around where I live so Im on my own to get it fixed. So much for getting your moneys worth.

I purchased my Whirlpool washer and dryer 4 yrs ago. I was planning on purchasing Samsung but the saleswoman at Gils in Bristol, RI strongly recommended this junk!! A washer and dryer should not quit after 4 yrs w/ a household of 2. The dryer never dried properly. Each load took 2 cycles. Yes, repair were called and we were told its a design flaw. The washer just stopped spinning. Repair will would have been $550. These pieces of junk were replaced by GE electric stackables. Fingers crossed....they are working satisfactory!

I recently just purchased a new home with an upgrade provided by the builder (which I paid), kitchen appliances to Whirlpool Gold package. 2 weeks from the time the house closed escrow, I used my Whirlpool Gold Accu Bake wall oven self-clean feature. I set it for 2 1/2 hours, which is not even a full cycle of 4 hours. I noticed after 2 hours that the oven shut down. The oven exhaust was hot and the panel control as well, (almost burned my hand). No power and door locked. After a week of waiting to cool down hoping it will unlock and turn back on, it didnt. I called the builder and Whirlpool. Of course, the builder said to call Whirlpool. They registered my oven and set an appointment. The contractor (A&E) came to take a look at my oven and assumed that it was just thermal fuse. He was explaining that the oven does heat up and shut down. Probably after this repair, this will happen again. He replaced the thermal fuse and tried to turn on the oven. The house electric breaker is working, but the oven still did not turn on. So this time, he checked the control board and said that it is dead and will have to order. I am tired of having an oven for 2 weeks only and already have this issue. I did find out as well online that Whirlpool do have several complaints regarding their self-cleaning oven. I want to either just replace the whole oven or give me cash so I can replace the Whirlpool and buy another brand. I dont see the point of having a self-cleaning oven if this will heat up and shut down the unit or get a suggestion not to use the self-cleaning feature anymore so it wont break. I think this is a design issue and Whirlpool is not taking the responsibility to fix the design to start.

Bought the Duet front loader washer and dryer. Nothing but problems and repairs. When I decided to throw in the towel and buy new machines my repair man convinced me to buy Whirlpool again - Cabrio. Said they are amazing. Love them except the holes in my shirts. I bag my delicates but apparently I have to bag everything. So sorry I bought them. There was a day when you could count on Whirlpool. Replacing my crappy Whirlpool gold refrigerator right now too. Hoping LG will be better. Already replaced my Whirlpool dishwasher. Went to Maytag. This company has gone downhill. My mom had these appliances for 20 plus years - I spend thousands and cant get 5 years!!! Dont buy Whirlpool!

We are having our second major issue with our Whirlpool Refrigerator Model WRF757SDEM but unfortunately at 1-1/2 years old, it is out of warranty. Although the certified repairman says that the issue with the thermostat is a known issue and the company created a whole new part to fix the problem, there is no recall. Customer service was lousy. They deny any know issue (again, they created a new part they will sell us to fix the issue) and they mocked us for not buying their warranty after having the first problems with their fridge. This new problem will cost over $300 to fix. Why is there no recall if they knew about the issue?

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

I just bought a Whirlpool Duet Front Loader, and it vibrates excessively and wont fully rinse out all of the detergent. I have to take the tray out each time and rinse. Also, it has a musty smell.Whirlpool sent a repairman out to replace the shocks on a washer that is less than 2 months old. The repairman told me to use less detergent, but I am only using a teaspoon of powder detergent which is recommended and using Affresh once a month. There is nothing they can do about it till it is deemed unrepairable.

My Whirlpool Gold Star aqualift oven stopped working right at three years, when the warranty ended. I paid the $650 for repairs to the stovetop, hoping this was a one-time situation. Six months later, my oven has quit. This product is not a good investment. Im very disappointed.

I bought washing machine Whirlpool Cabrio Model WTW7300XWO two years ago. It only lasted 2 years and the tub seal and tub bearing went bad. I called Whirlpool and they wouldnt replace defective part on their dime. I talked to supervisor and they still refused to admit they needed to fix this broken product on their dime and make it last longer than 2 years. They claimed only a 1-year warranty. This is totally unacceptable to have a supposedly good washer that you pay $700 for (manufacturer price $899) last only 2 years! Very, very disappointed! I wouldnt buy from this company again!

After the pilot light on my water heater would no longer stay lit, I contacted the Whirlpool technical support number listed on the unit only to be told my unit was still under warranty, but I would be responsible to pay a $65 diagnostic fee and any labor associated with a repair. The technician came and said my ventilation system was the problem and didnt even touch the unit. He then sent a report to Whirlpool that the unit was flooded which voided my warranty. He did not submit photos to substantiate his water damage claim and now Im being told the unit is unsafe and must be replaced at my expense. This all sounds like collusion to not honor the warranty! I will never purchase a Whirlpool product again!

I have a Whirlpool cabrio washer (Model: wtw6300 Serial Number: CT3573525) and I am very disappointed with it. The spin cycle is the worst--sounds like a jet engine and gives me the UL error message of unbalance load. The machine was purchased in 2007 but was kept indoors. At the beginning, I didnt care because I had warranty with BrandsMart. I had to call at least four times. But now, I bought the automatic control and it didnt work. For two days, I was trying to balance this machine but it is impossible since the beginning.I contacted customer service and they advised me to contact the repair service in my area to get a diagnostic analysis of the issue. Hello! I already know what the problem is after reading all these reviews! I cannot tell you how pissed off I am. I will never purchase anything Whirlpool. Two of the gas burners of my Whirlpool kitchen, after two years of use, are no longer working. I will definitely contact BBB as soon as possible. Come on, fellow complainants, let us continue to fight to get a possible recall soon! We all have the same problem because this is a manufacturing defect!

I hadnt had the machine. In no time, I started noticing brown rust looking spots on my whites and light colored clothing. I got to looking and had rusted out all around the bleach dispenser, entire area on the entire top. I was told to replace it. This would be about $200. Ridiculous!

Purchased the machine in 2008 for $800. I did not have any problems (wash 3-4 loads/week), pleased with the washing until July 2015 when the machine was spinning out of control and the machine moved approx. 1 foot across the floor (thank goodness I did not have it on a pedestal as it may have tipped over). I canceled the run. This was a fine washables load of 5 sweaters placed on a medium spin.Scheduled the Whirlpool authorized service tech to come out and fix. He indicated there is extensive repair required and would cost approx. $1800. And indicated he has seen this failure before and it is due to the plastic parts inside. Also, he has seen these washers last about 5-7 years before replacement. Wow, last washer I had was a Maytag and it lasted 15 years costing 1/3 the price of the Whirlpool Duet. Now perplexed on what to buy, called Whirlpool Customer Experience Center to register my complaint and asked if there were any updates to the product that would avoid this failure. The center indicated there are updates but they are confidential and did not know if this failure was addressed.

April 14, 2014: Bought Whirlpool 30 electric stove WFE361LVQ Sept 2009, $545 - only 4.5 years old. While broiling, got strong electric burning smell, filled house. Broiler and oven stopped working (top burners OK). Opened back and found BURNED CONTROL BOARD corner and BURNED OVEN FEED WIRE. Definite SAFETY HAZARD. New panel $289 and wire harness $105 + 25 = $418, discount to $375, + service call to find out why/install guarantee $129 = $505. Ridiculous! Will contact Whirlpool for recall and compensation. Hope other recent entry sees this. (How respond to specific entry, since this response pulls us away from listings?) Meanwhile, well buy any other brand replacement.

I purchased top load washer and dryer from Lowes last week. When I was washing clothes the first time 12/4/18 (the day Lowes delivered) I washed in quick wash setting, machine was showing me all stages of the wash on the progress lights. It took about one hour for one load. Today 12/11/18 I spoke to your customer service associates Trina regarding the issue with my top load washer wed4815ew1 serial m82572023. I was told a technician is schedule for repair tomorrow. I try to quick wash two loads, washer progress light only went to wash mode only. I had to press start/pause, select drain and spin to remove excess water. I started 8:30 am and finish around 1 pm. I was waiting for the cycle to finish, twice all progress stages light went blank. I have no idea when it will be done. Machine made noise, not spinning, no water in it. The dryer wtw4816fw2 serial c84621285, I dry at energy prefer setting, when the clothes was dry, dryer continue without the buzzing signal to stop. I had to keep watch of the time and turn it off manually so it not energy efficient when I have to monitor when clothes will be dry.

Purchased a Whirlpool Electric Range August 2015. Purchased it because it looked pretty and the Aqua Lift Cleaning feature sounded too good to be true. As it turned out it WAS too good to be true! I have just read a # of reviews about this range and I agree with all complaints. Does anyone like this range? The AquaLift cleaning technology is a joke! The baking temperature fluctuates & I could not figure out how to improve on that (for the longest time I thought it was just me not being able to figure out my new oven). The most serious concern however, happened a couple of weeks ago when I turned on the oven & immediately the oven started to smoke and an electrical smell permeated throughout the house. Had I started the oven and immediately left the house our house would no doubt have been destroyed by an explosion/fire.Phoned Whirlpool & because the problem was so serious they had a serviceman at our door within 2 days (yes I am being sarcastic, it did take 2 days). At no time did the call centre express any concern nor did they advise me to unplug the range and to make sure I did not use it. Obviously, I would not use it but shouldnt that be something they advise as part of the checklist talking points.Serviceman arrives 2 days later & advises us that the parts alone would cost $650.00 & oh yes the labour costs to install the parts would be charged by the minute. I didnt even ask him how much per minute because only an idiot would repair this piece of junk!! The power cord to the range had basically melted right through; you could scrape the char right off the cord. The computer part of the range was shot and had a strong electrical smell to it. The serviceman basically said that I shouldnt shoot the messenger and charged us 93.45 to tell us that it was going to be a very costly repair.I disliked this range almost immediately and was looking forward to the day when I would have an excuse to purchase another electrical range. I did not think I would be shopping for another range within 1 1/2 years from the time I purchased this piece of crap!!! Nor did I think that there would be a possibility that this appliance could potentially be hazardous to my family and home. How long is Whirlpool going to ignore all these customer complaints? This range should be recalled! It not only is selling features such as the Aqua Lift technology that do not work properly, it is selling a potential fire hazard.I will never again purchase any appliance that is made by Whirlpool. Whirlpool makes a lot of appliances and uses names such as Maytag, Amana. KitchenAid, etc. I have purchased another range and this one is made by Frigidaire (no connection whatsoever to Whirlpool). I dont know what my experience will be with my new Frigidaire Range but so far I am loving it! Hopefully, my new appliance will not nearly burn my house down. Whirlpool: Step up to the plate & take responsibility for the defective electrical range you are selling before there is serious harm to persons or property! THIS ELECTRIC RANGE NEEDS TO BE RECALLED - MODEL # YWFE715HDEHD.

I purchased a Whirlpool water heater on 9/30/2011. It is leaking at the point of cold water entry and is spewing a brown colored watery substance, leaking on the floor.

I bought a 40 gallon Whirlpool water heater product no. 0733336 and it completely broke down after one year and three months. No pilot light even. I called the number on the unit and was informed that only the cost of replacement parts would be covered by warranty. I still have to pay someone 60.00 an hour to come out and fix it. Never again will I buy a Whirlpool product.

From the very beginning the washing machine did not clean the load. It doesnt even get the load completely wet. The best you can hope for is to utilize lots of fabric softeners to at the least make your clothes smell clean because they surely wont be. Dont even get me started on the load lock feature because it serves no purpose other than to drive you batty. When your 15 year old son offers to give you money to buy a new washer after owning the one you just bought there is nothing I could say more profound than that. How Whirlpool stays in business befuddles the mind.

I installed my new water heater in 2012. Within 3 months, it was not producing hot water. When I called, a helpful person at the Whirlpool warranty line told me it was because there was too much cold water being mixed into the hot water coming from the tank. I hung up... Called again and was told that they would be able to get someone in 2 weeks out to my house to check it. I told them that was not acceptable. I hung up... I called Lowes, where I bought it. The person on the other line finally, after more than 1 hour, was able to get a repair person out there within 2 days. I had to pay the fee to have the guy come look at my hot water tank, and tell me that he hated Whirlpools. He called Whirlpool, 3 times; he was hung up on 2 times. He explained what had happened was I had a hot water leak, that it probably it was overloaded, the thermostat control everything else was fine. However, that I had installed the heater myself not a professional. Therefore it was not up to NATIONAL code; therefore, Whirlpool refused to honor the warranty. So, short version, in order to get the tank repaired, I was supposed to spend an additional $300-$400 to bring the heater up to code for them to honor the warranty. What you ask made my heater out of code? It is outside in my utility room, and the flue was cut to fit and the OUTSIDE vent pipe was not above the roofline. It didnt matter that it is not in an enclosed space, that this was nothing to do with the reasoning the thermocouple went out.I simply turned up the heat, so far so good. Will I ever buy another Whirlpool? No. I have a Whirlpool fridge bought before the hot water tank situation. The ice maker went out within 6 months of purchase. When I called to have it repaired, the service guy stated he hates Whirlpool. The piece he had to replace was plastic that was replaced with a metal piece that should have been metal to begin with.

My oven was 11 months old when I tried to use the self-clean cycle for the first time. 2 hours into the 4 hour cycle, the oven completely shut down, door locked shut and no lights on the control panel. The repair tech came out on a warranty repair call (no charge), explained that Whirlpool does not use a thermal protector rated for a self-cleaning oven and that it blows every time. He then proceeded to replace it with the same thing because he is only allowed to put in the recommended part, which is not rated for the high temp cleaning cycle. So the oven is usable, but not the self-clean. Since I am at the end of the 1 yr warranty period, even if I were able to get Whirlpool to replace the oven (ha!) there would be no warranty because I only get the original time limit. So if I had a new oven and it blew out, it would not be under warranty for fix/replace. The repair tech said this is a COMMON problem with Whirlpool self-clean.

I purchased a Whirlpool washer (WTW4800Q) in November 2011. Already, it has rust in the tub. The warranty does not cover this. I never really liked the thing since I have had it. It takes much too long. Lid locks and then starts over. Also, warranty is not good. I wouldnt ever buy their product again and suggest no one else should either. I loved Maytag before Whirlpool bought them out. Im putting this one on Craigslist and buying a real washer, a Speed Queen! Yes, Speed Queen has all metal parts and makes a home washer. Just have to find a local dealer. They are there.

Bought a brand new 40 gal water heater from Lowes. Installed it and it worked fine. Next day no hot water... After doing all the tests with tech support. This smart mouthed CSR explained to me how her uncle is a master plumber and she knows what shes talking about. Still couldnt tell me what was causing it to not work. Other than the reset being tripped. I have had good luck with Whirlpool products. But customer service has always been poor.

My landlord replaced our old Whirpool topload washer with a Whirlpool HE topload machine last year. Looks sleek, lots of settings BUT IT DOES NOT GET CLOTHES CLEAN - not on any setting, not if loaded as recommended or under-loaded, not if I use more or less detergent, and not if I follow all the tips for getting rid of residue. This machine so under-performs I have to spot clean my clothes AFTER I was them. And were not talking deep dirt or grime here, or things that need special treatment, Just ordinary dirt dirt, to which the machine adds gray streaks of dirty water residue. Thank God I didnt buy this turkey for myself -- I will NEVER buy one of these machines. I did two small rugs today and they came out dingier than they went in. These machines should be recalled. If I could give it less than one star, I would.

I purchased a Whirlpool stove, microwave and fridge in November 2012. The fridge model #WRT771RWYB01 has been a lemon from day 1. I have had the repairman out for the same issues multiple times. Ice build up in the freezer, water tube to the ice maker frozen, food in the fridge freezing, blah, blah. They have taped, glued, replaced everything they can and to no avail. It still happens. When you call for service, it takes 2 weeks or better to get someone out. I will NEVER buy another Whirlpool product! This has truly been a nightmare experience!

Our countertop Whirlpool microwave oven is just over two years old and one of the led lights in the clock display just went out. The push-button opening mechanism is very hard to work and quite loud when the door is shut. When the timer is set but the start button is not activated for a few minutes, the door warning goes on and you have to reset the timer. There are five beeps that indicate when cooking is done and they continue even when the door is opened. The only way to stop them is to push the stop button and there is no way to adjust the noise level or number of beeps.

Even the repairman said Whirlpool isnt making them like they used to even though they are charging more for newer appliances. The freezer has clogged, ice maker already broken, have to replace $400.00 for just the icemaker. As a real estate agent, I will make sure and let our new home buyers never to purchase Whirlpool again!

The top of the range stays very hot. Not the burners -- just the top of the stove itself. Now the oven pilot wont light and there doesnt seem to be any sound or smell of gas when I try, though the range works fine.

The machine cleans clothes okay but constantly gets out of balance and sometimes it take all day to complete an entire cycle. It is very frustrating to rearrange clothes, restart the washer, and then wonder how many times it is going to take. It is especially time consuming to wash a large item like a bedspread, not to mention the waste of water. I can expect to reset at least 3 times. The machine is less than a year old. I think it is a design flaw or else I just have a lemon.

After replacing our competent GE dishwasher with a Samsung dishwasher and having to replace it immediately due to the terrible job it did, we bought a Whirlpool Gold Series (stainless tub) for just under $400. I realize this is the bottom of the stainless tub price point, but we have been so disappointed! The silverware container sites outside the regular tub, and rarely cleans even easy substances to remove, if there are more than a few items in each container. Dishes on the other levels are very hit or miss -- each and every load has to be examined for dirty dishes. Id pull this one out and return it too if it werent such a hassle. Dont buy this product.

Refrigerator is only 4 years old and must be defrosted every 2 or 3 weeks as a thick sheet of ice forms in the bottom of the freezer. Also the appliance frequently emits loud cracking noises.

Bought this machine in Feb 2007 as a pair Whirlpool Cabrio. I loved it for almost two years. The control board went out, Whirlpool replaced it. A couple of weeks later, the F-1 codes started then the F-51 codes. On July of 10, it was code after code. It sounded like a jet taking off and constant unbalanced load. I called repairman and was told to go buy new machine as repairs would start at $500 and since I live in a rural area, no one wanted to waste their time. Two repair techs told me point blank they wouldnt even touch it. We paid $1000 for this machine and we live pay check to pay check. I spent four months trying to get Whirlpool to do something. I kept getting told I should have bought extended warranty. Machine has been sitting under stairs for over year waiting to see if class action or recall can be done. Also when control board was replaced, the repair man told me it was rusting away from the inside out. My husband had to find us a used washer and this thing has done nothing but cost us money. So much for efficiency. Everyone posting here also needs to go to Whirlpools Facebook page and post there.

We bought this Whirlpool he washer two months ago, and it is the most aggravatingly frustrating washer weve ever had the displeasure to use. There are times when it washes just fine, but I always have to put the mode on deep water wash because the normal mode uses very little water (like its supposed to) but it doesnt clean the clothes. However, most of the time it doesnt wash at all. All the lights will turn off and youll hear this sound and itll drain the water without having been in the wash cycle. Worthless piece of equipment! I prefer the old washer where I have more control. Whirlpool used to be such a good brand, What Is Happening? The new design for their washing machine nowadays generates a lot of complaints, and with good reason (because they suck).

I bought Whirlpool Cabrio washer two months ago (Model number : WTW7300DW0). They indicate washer use less water and clean better, but that is not true. Some clothes on top of the load were not even getting wet and clothes smell bad after washing. Even worse is that clothes got holes in many places and some clothes were totally destroyed after washing. In just two months, I have to throw away many of my towels and clothes. I dont believe this kind of washer should be sold again. This should be a recall to give us a replacement ASAP and remove any products still in the market. There are many complaints online, I hope someone will stop this and do the right thing.

I purchased my water heater from Lowes about 11 months ago. The heater worked just fine for about 3-4 months then a popping noise started like a drum. I called Whirlpool and got this song and dance story with several email telling what is needed to do. Whirlpool said it was a water knock and I needed to install some devices on my water line or a tanks which cost a few hundred dollars. I called the plumber and he replace the main control valve. Same problem again so I called several other times and a plumber came and said it was my water pressure in which his gauge was incorrect. I went Lowe’s to complain and they said they would check into the situation and call me. It’s been several days and no results. Still the same problem. The Heater is a piece of trash and would not suggest anyone purchase one. It a total piece of trash and will replace with a premier heater very soon. Requesting Lowe’s replace or will take to Small Claims Court along with reviews pointed here. By the way, they want $450 to install the items on my water line - almost half the price I paid for the heater.

I had my Whirlpool electric stove for about fifteen years, I have had a couple minor problems with it. The oven temperature sensor went out, I bought a new one online and replaced it. The stove top eyes get warped from uses. Really no big deal. Ive had good luck with it over the years. Its the standard 30 inch white. I paid over $400. It will probably last me another 15 years, I dont see why it wouldnt. But then I know how to fix appliances. I think the only reason why anyone would replace a stove is because of the color or it caught fire or wont come clean. The mechanical isnt a problem because you can rebuild them so easy.

Purchase 2009 Duet Washer & Dryer (WFW9700VW00). Recently have had error codes coming up - F35 for one. Could not get washer to reset. Had to keep unplugging and plugging back in. Service was called and the tech knew right away what was wrong. He ordered and installed an analog pressure switch. While he was working he mentioned that this was a known error and if we had called with this problem a couple years ago Whirlpool would have replaced the washer. Im not looking for a replacement but I feel Whirlpool should cover the part having been a known issue.

This WP stove is so easy to use a child could do it. We use the built in timer all the time, not only when using the oven but timing items on the top of stove as well. Speaking of the oven, the self clean not only cleans but it leaves the oven sparkling. We love it.

The reason for the call was to find out how to file a claim after replacing the ice maker and paying for it the 3rd time, they were very argumentative and would not listen to me about the design flaw in the wire harness that burns up the motor for the ice maker. I found out about the design flaw from talking to the repairman that replace the ice maker who works for Dick Kearsley Clearfield UT. He told me that Whirlpool knows about the problem for the 22 cubic foot and 25 cubic foot refrigerator and that is why they have 2 different new wire harnesses in the box for replacement of the old wiring harness.

WORST EXPERIENCE USING WHIRLPOOL REFRIGERATOR. I purchased a Whirlpool Refrigerator in July 2013 (Model - Whirlpool Ref New 495 CLUB IMPERIA). Suddenly it stopped working on May 12 and I registered a compliant to the customer care. Engineer came in same and I was surprised by the service, he checked and said he rectified the problem and he left. But the problem was still there and it was never rectified. I launched the complaint again on May 13 and engineer came again and said there is gas problem in Compressor and he left by saying that another engineer will come to refill the gas in compressor. Next day new engineer came in he checked everything and said this compressor is not working and needs to be replaced. I said go ahead and replace it, he said it will take 1-2 days. I said “ok lets do it.” But now theyre saying that they do not have the compressor in stock and they will change the appliance. Again as I do not have another option I said “ok lets do it.”Now the drama start: they are saying I need to pay 20% as a depreciation of the total cost of the refrigerator + INR 1000/- (Cartage) + difference of the new refrigerator which comes to around INR 21,000/-. Well can someone tell me why I need to pay this huge amount when my appliance is still in 10 years of warranty and its just compressor problem and rest of the product is just fine. After fighting with them come to a conclusion that I need pay INR 10,200/- and I will get the new appliance. Now when I already paid the DEMAND DRAFT (DD) of this amount now no one is responding to me on when I will be getting a delivery of the new Refrigerator. Only God knows when I will be getting this. In this HOT summer we are facing a lot of issues just because of their bad service. No one from Customer Care is giving me any response nor are they taking my calls now.Now can someone tell me what I should do? I am left with no option and thinking of taking a legal action against them and thinking of launching a complaint in Consumer Court against them. Please give me your suggestions and send me your response at **. If anyone from WHIRLPOOL is look into this, please help on this matter urgently and respond me back ASAP.

What is the brilliant idea of a mode dial on a washing machine that needs to be pushed in or pulled out to engage its function??? In other words, why is there a free-spin mode of THE DIAL itself? Okay. IN OTHER WORDS, why not just let the handle part of the dial stay affixed to the red line mark, so that they continuously turn together at ALL times???

WTW4950XW2 - I purchased My whirlpool washing machine wtw4950xw2 from best buy in 03/30 2013 and it just stop working after 3 yrs. The manufacture warranty was only good for 1 year. I think companies does that on purpose because they know these new equipments are not going to last. I think before they use to have at least a 3 yr or better warranty on appliances. First it started making this loud sound when on the spin cycle, so I had a repair guy come out. He told me that the bearings needed replaced so (how does bearings goes out in 3 yrs). I asked how much will it be to replace parts/labor. The Parts cost $250 and the labor is $200. I might as well buy a new washing machine. I am so disgusted with this machine. My previous Whirlpool, which was not the new modernized, I had for at least 12 years and also I bought a whirlpool dryer. My Dryer stills works after 15 yrs. Im going to try to hold on to the dryer until the long haul. I wish I just would have gotten my old washing machine fixed. Now Im looking for a new washer and I wont be doing a whirlpool or anything with a push to start - just a plain old agitator, no sensing mechanism, just basic.

Had the washer 3 years. After 1st year had to replace motherboard and lid locking mechanism. Beginning of year 3 the basket came loose, the machine wouldnt spin the water out of the clothes completely and then it quit cycling into the next cycle, ie, the tub filled up with water for the wash cycle but then would not begin agitating. The water sat in the tub until the wash cycle was done and then would drain but would not spin. Each cycle had to be manually started by pressing the pause button, raising the washer lid, and then pressing the pause button again. I called a repair person who ran a diagnostic on the machine and said it needed a new pump, new motherboard again and something else to make it spin properly. Sorry I dont remember what the something is. The estimate to repair was approximately $759 so I am now shopping for a new machine thats not a Whirlpool.

We bought a Whirlpool washing machine two years ago and bought the extended warranty. The machine quit working so we called the warranty service number. We have had a repair man sent here 5 times from them. The technicians have put two new control boards and a new door lock on it. They have another part ordered for this week.The machine is still not working after five visits from service technicians and they say they cant fix it. The extended warranty service plan says if it cant be fixed they will replace it or send us a check for it. We have contacted them several times and they dont want to make good on it. So we have a broke down washing machine and have to go to a Laundromat every week.

Overall the stove works well but it is horrible to clean. You have to use a lot of muscle to get the spills up from around the burners. It is hard to get around the burners to get all the spots off. The gas burners work well & cook evenly.

Our Neptune washing machine is 15 yrs. old. Minimal problems, which I could fix myself. The door gasket needs constant attention to prevent mold. It is a front loader. I have replaced the gasket once. The belt transiently slips.

We purchased a water heater at Lowes. Our old water heater had an issue but we always had good water pressure with the hot water until we made the horrendous mistake to purchase at LOWES - the worst possible place to buy a water heater. They sent the water heater and we had to look for someone to connect the WHIRLPOOL WATER HEATER (the runaway water heater). When it was installed the water pressure at my home was so bad that only one shower can be used at a time. This never happened before with the old water heater, there was no pressure at all.We called LOWES the WORST PLACE TO BUY A WATER HEATER, they did not accept any responsibility and they sent me to the Technician that Lowes has in DENVER to fix the problem. This bad company (WHIRLPOOL) sent us a crooked technician who wanted to charge us $600 dollars to repair something other than the water heater. We did not trust this person and we called another technician who told us that the water heater is not working properly. There is no one at LOWES and NO ONE at the Whirlpool customer service who can help us with this disgraceful water heater.DONT BUY WHIRLPOOL WATER HEATERS. DONT BUY AT LOWES!!! They are crooks! They do not respond for their products. They do not want to exchange the damn water heater as HOME DEPOT would. Buy everything at HOME DEPOT! Run away from Lowes! They dont stand behind their products, they send you all the work and if you have something wrong with your purchase they will not help you.

Whirlpool French Door 32 Cu. Refrigerator - Purchased refrigerator Nov 2016. Never worked, never cooled. Called Sears and was told to call Whirpool. Had to then wait 1 week for repair company to send out service tech. He determined it was unrepairable. A replacement was delivered. The replacement started flooding the interior down the back, filling underneath the bottom drawer and down into the freezer (ruining everything in the freezer) and out onto the floor. Called Whirlpool and had to wait another week for a tech. They assessed the problem and left. I was told it would be fixed within the week, that theyd call when the parts arrived. 3 weeks later, no word. Called Whirlpool, the parts were on backorder with no ETA. Two weeks later the parts were expedited, after I called again crying, and a tech came out again to fix the flooding. Two weeks ago the fan started to make a very loud noise and the internal temperature started to fluctuate and finally settled between 55-60+. Everything was ruined, again. This refrigerator is defective. Whirlpools customer service is deplorable. DO NOT BUY ANYTHING FROM WHIRLPOOL!!! They dont care that they make and sell defective crap. They dont care about how much money and time youve lost because of their defective merchandise. You have to have a service repair person come out at least 3 times before theyll even consider a replacement unless the repair tech considers it unrepairable even if it never really works or if the parts take weeks to be delivered. They DONT CARE about anything. Worst part is that I have no power or recourse. No one will help me. I was told today by the Sears Customer Relations to hire a lawyer. :( This is so wrong.

Whirlpool Duet Sport W & D purchased from Costco in mid 2007 for $1600. Costco gives an additional one year warranty, totaling three years. Both have worked exceptionally, I must say -- clothes come much much cleaner, keep their color, and last much longer vs. top loaders (Im sure the water softener helps). Two separate techs just confirmed the circuit boards went on the washer ($450 with labor) to replace. Washer looks brand new, but now will be going to the curb.

In remodeling a house, we got all Whirlpool appliances for the kitchen, right when the lockdown started our freezer went out, 8 visits later from a local repair person, Whirpool will not honor the warranty and get us a new fridge!!! They just want the repair guy to keep replacing all the parts he has already replaced, the repair guy is beyond frustrated with Whirlpool and their crap!!! Never again, totally lost a customer here.

Whirlpool Cabrio washer - Its very expensive and it quit after 3 years. Repairman said computer component went out and it would cost $450-$520 to repair and it wasnt worth it. He also told me I should have read reviews first. Whirlpool said I should have bought extended warranty. No more Whirlpool appliances will be bought for our homes or business.

Am posting in regards to a brand new dishwasher that I purchased the first part of February 2020 from Menards. The dishwasher I bought is Model # WDT730PAHB and Serial # F94519386. I had the dishwasher 10 days and it stopped working after running only two times. I checked the breaker box and all electrical connections to the machine and it was getting electricity, but would not turn on at all. I called the store to return it and they only have a 7 day return policy. Since then Whirlpool has been contacted and I have had two service calls from Whirlpool. The mother board has been replaced (which I waited two weeks for the part & five hours for a service man) and still it will not come on. Now I am waiting on a wire harness, ordered on March 4th or 5th and still not here. I completely understand wanting to fix a broken machine, however this was a new dishwasher that only worked for 2 washes. I have now been without a dishwasher for almost 2 months, which in light if our current world situation isnt a huge deal, however this is a time when sanitation is very important. I feel like Whirlpool should offer to replace my new machine with a new machine and not something that is refurbished. At this point it is costing more to repair this machine than to just replace it. Every time I call Whirlpool I get the line of we have to repair it. Give me a break. Take care of your customers!!?? #neverbuyawhirpoolproduct

From the day I bought the refrigerator the icemaker has not worked. I have had a estimation of service calls (8) and nobody seems to be able to fix it. Whirlpool mailed me a new icemaker and still the exact problem; water and ice works but the unit still will not cube or crush ice; which by the way is the reason I bought a new refrigerator. My thoughts are I bought a lemon and the entire fridge needs to be replaced.

The Whirlpool Cabrio washing machine it’s the best washing machine I’ve owned. Water temperatures are right on, has an express wash 38 mins for lightly soiled clothes, plus the normal, delicate, heavy, bulky, 2nd rinse, if you need it. My wife loves it because it’s very Gentle on her personal items. Energy saver AND BEST OF ALL, IT REALLY CLEANS THE CLOTHES.

Whirlpool Duet pair. Like Whirlpool products and have had good experience with them. Have had the pair for 3 years. Like the way they wash and dry. Clothes do not take a beating. Only dislike is the vibration on the washer. I look for capacity and extra features such as: steam option and extra cycles. Now I also look for noise and vibration. Would definitely like to stay with Whirlpool. Definately cost is important, but for the sake of a few dollars more the options and the brand are something to be considered. Having a steam cycle and wrinkle cycle are important in any dryer.

Just bought this washer, its making a lot of noise, sounds like something is grinding (metal, gears, etc). I thought Whirlpool was suppose to be good. I just had my Maytag go out after 18 years of service, thought about getting another Maytag but found out Whirlpool makes those. As many complaint as I see, seems there needs to be a class action lawsuit against Whirlpool for shoddy work.

A couple of years ago, we had 2 natural gas hot water heaters installed. We immediately had a service call to replace the thermostat on one of them. Then recently, the other one had to be replaced because of the leaky tank. It was still in warranty, and we had to pay $425 for the old one to be removed and the new one installed. Now, this one has a bad thermostat and the A & E Factory Service is coming tomorrow to install the new thermostat. We have been inconvenienced by this for a couple of weeks as we have no hot water in the master bath. We were just lucky that we had one hot water heater working in the other part of the house. I think that Whirlpool should have paid the $425 for the installation as the original hot water heater was in warranty. Now, I hope that tomorrows visit will be covered by the warranty. Next time we need an appliance, we will not be purchasing a Whirlpool.

Whirlpool model N40T91 with FLAME LOCK - first failure was the controller valve only within 9 months of a new installation, replaced sort of free of charge, landlord had to pay ship charges. Days and days without hot water. About 6 months later, pilot failed to stay lit. Landlords maintenance man called Whirlpools Customer Service. They had him jump through hoops and finally told him to press a white reset button on the igniter. Okay, that worked. A few days later, pilot went out again, white button was reset, working again. Recently, and more frequent now, white igniter button keeps popping out, and we keep resetting it and relighting the heater, repeatedly, 4 times in one day.Maintenance man comes and calls Whirlpool Customer Service. They advise him to check this and check that. Everything seems to be in order. They say they will send out a qualified service person to diagnose a potential problem, a charge of $200.00. Maintenance man and landlord say, No thanks. Maintenance man goes to Lowes to buy a different brand model. Guess what? Envirotemp Hot Water Heaters have the same control device as the failing Whirlpool. He reboxed it and took it back and said, No thanks. Ill try to upload the images of the water heaters and controller you should stay away from purchasing. Meanwhile, maintenance man went to Menards and purchased a Richmond model, a well known, and reliable water heater manufacturer.

I have the stainless steel Whirlpool Gold appliances. They look beautiful but do not work for long. For one, the dual burner never heated properly on the cooktop. I just worked around it. The oven vent on the cooktop left brown marks on the stainless facade attic top by the clock. Ive read some have melted this area. Then after 2 years, the entire front glass door and handle fell off when I opened it. It not only fell, but the cheap plastic lip that holds the door on cracked so it is impossible to get back on. So, since I cant afford a new stove. Im stuck with this horrible looking mess in my kitchen.

AquaLift Self-cleaning does not do the job as advertised. It does very little to clean the oven. Sitting-on-the-floor-in-front-of-the-oven scrubbing is what is needed to clean the oven.

We purchased a WHIRLPOOL appliance 1.5 yrs ago. Approximately 7 months after purchase, the refrigerator began making a high pitch whining noise. We contacted WHIRLPOOL who sent out a mechanic who really appeared to not know much about the product. He made some sort of bogus repair and call himself fixing the problem. Well, a few months later, same problem... same noise. Now we are asking WHIRLPOOL to help and theyve done NOTHING. Now we are fighting between LOWES and WHIRLPOOL to fix our problem. We spent $2,000 on this appliance and I feel like we purchased a LEMON refrigerator. Did I mention the ICE MAKER seems to be the keen problem. I will NEVER purchase another WHIRLPOOL appliance. Im SO done!!!

The trim on the front the my Whirlpool electric range has rubbed off. This is where the knobs for the burners are located. It was replaced once during the Whirlpool 1 year warranty (so it obviously happened with the first year!) and again during the second year we have had it. We have an extended warranty but have been told that it is not covered. It is ecstatically unacceptable. We have not used any type of harsh cleansers on it - simply a sponge to remove any spills yet it keeps on disappearing. I strongly recommend against buying any range from Whirlpool as it is quite obvious that they do not stand behind their products beyond the first year.

I paid ~$1200 for a new Whirlpool (French door top fridge and pull out freezer bottom) 7 years ago when I bought my house. I was so excited - and the appliance has been a problem from the beginning. It has always made a very loud knocking noise - even when it was new. I was told by the technician there was nothing he could do and Home Depot wouldnt help me with it either. My freezer has gone out three times - the last time was the day before Christmas Eve 2016 (a few days ago). I lost everything for my Christmas dinner that was in my fridge because that went first.Then when the service man came today, I was told it was the freezer that is causing the problem and everything had to be defrosted - plus they had to order a part that would take 3 to 5 days - so Im now going to lose everything in my freezer as well. All in all with the three service calls and the food I have lost probably amounts to around $800 - $900. I am so upset and cannot get any help from anyone. So, Im just warning you - NEVER buy a Whirlpool!

Just like so many on this site Bought Whirlpool Model #WRF990SLAM02 refrigerator new in 7/2013. Just went on vacation for 2 weeks, I come back and the freezer and ice maker are not working. If what everyone on here are saying is true then it looks like I too will have to purchase a new refrigerator and you can bet it wont be a Whirlpool.

I bought this stove 4 years ago from Lowes. I have had nothing but problems ever since. My family is now afraid to use the stove and Whirlpool refuses to stand behind their product. The last straw was a bill for a service call that took 6 months to complete without correcting the problem. Whirlpool sent me a bill for $100 to pay for the privileged. When I complained, WP said if I paid the invoice, they would give me a deal towards a new stove. Meanwhile, the old stove does not work and we are afraid to use it, given our experience with its reliability and safety. I plan to return it to Lowes and buy anything but a Whirlpool product. Beware of Whirlpool Maytag anything!! The customer service is shameful!!

The first washing machine I bought was a Cabrio. Started having problems right off. After the repair people had been there several times we finally got Whirlpool to replace the machine. We got another washing machine. We bought two warranties because it kept tearing up. Repair people said this time it would take $1500 to fix it so of course AIG said, We will not pay this much. So I have a washing machine I have spent $1600 on and it leaves, greasy spots all over my clothes. So fed up with Whirlpools trash!!

Late on the evening of Monday, January 27, 2014, after springing a leak in my 8-year-old water heater, I purchased a new Whirlpool model N50T61 replacement from Lowes. Installation went smoothly and the unit lit off fine the first time. It heated the initial tank of water rather quickly, but the next morning, I noticed the status light on the control unit was not blinking, which indicated the pilot light had gone out. I relit the pilot light, the water heater fired off and appeared to be working properly. 12 hours later, the status light was out again. I relit the pilot, but within 20 minutes, it went out again.On Wednesday, the 29th, I called Whirlpool customer service and explained to the representative what had been happening. He stated that since the status light was not blinking a code, the problem was either an air supply or venting problem, and he couldnt help me. I relit the water heater again and performed the match smoke test described in the owners manual on the vent connection. It did exactly what the manual said it should do, so I assumed that was not the problem. However, while performing this test, the water heater went out again. This time, being right there when it shut off, I saw the status light blink twice about 5 or 6 times before it quit blinking all together. The two blink error code indicated low millivolt signal from thermopile.I called customer service again and explained to the representative what the first person had told me and also told him the results of my test and that this time, I had observed the two blink error code. He asked if I had a multimeter (which I do), so he had me disconnect the wires for the thermopile, connect the meter to the wires, light the pilot and read the voltage. My meter is an old analog unit, and not capable of reading millivolts (which is what the thermopile output is), and I informed the rep of this, but he had me do it anyway. As I suspected, I saw absolutely no reading on the meter. The service rep stated that he believed the error code and decided to send me a new thermopile assembly. However, their shipping department was closed for the day and I should not expect to see the new part until Friday. This was unacceptable, but he stated that this was the only option available to me.After thinking about this situation for a while, I again called Whirlpool customer service and told the representative that I was not satisfied with the solution previously presented to me and that I wanted a return authorization to take the water heater back to Lowes for replacement. The rep stated he couldnt do that, but said that there were a couple other things I could try. He attempted to explain these procedures to me, but wasnt able to do so clearly. He stated he would email the instructions to me. As of this writing, I still have not received the instructions.In the meantime, I did some internet research and found that Whirlpool water heaters have numerous chronic problems, including the issues I was experiencing. I decided this was not a product I cared to own. I called the Lowes store where I purchased the water heater and spoke with the manager. I explained the entire sequence of events to him, and he told me to bring the water heater back for a full refund. Since my local Lowes store only sells the Whirlpool brand, I took the money and purchased a different brand of water heater from another home improvement store. Needless to say, it will be a cold day in hell before I ever purchase another Whirlpool product.