Buyer Beware!!!! Warning!!!! Dont buy Whirlpool. Youll be sorry if you do! Dont buy appliances from Home Depot. Youll be sorry if you do! Purchased new Whirlpool gas range 10/29/2019 from Home Depot. By February 2020 the front door fell off, its not cooking properly (18 min frozen pizza takes 30 mins to cook). Clock not keep correct time. Whirlpool unwilling to replace the unit while the third party repair company, “well you should have bought it from us, we stand behind what we sell.” They have no idea when or if the parts will ever come in due to COVID-19. Its been down 8 weeks now.Even under threat of a lawsuit Whirlpool said, Sorry we NOT replacing it, go ahead and sue us. We covered by our contractual warranty agreement. Home Depot said they are unable to help due to their contractual agreement with Whirlpool. I have a dozen hours invested talking Home Depot and Whirlpool on the phone and have no more information than I did a month ago. Whirlpool Case # **. Next step is small claims and public shaming of Whirlpool!

On May 15, 2017, I purchased a new Whirlpool Water Heater, unknowingly made by American Water Heater Co., from Lowes (receipt attached). Model Number ES40R10-55 with a 10 year warranty. The water heater was installed using the directions in the owners manual. Upon turning on the current to the water heater after it was filled with water and all air removed from the plumbing, the module gave a code stating the top element was not working. Called the Technician Assistance Hotline and they gave me a RA number to get a new top element from Lowes. Got that on May 16 and had to call the plumber that is contracted by American Water Heater Co. to come to the house and inspect the heater to make sure it was installed correctly.The water heater worked once the new element was installed. On Oct. 3, 2017, had more issues with the module stating the top element was not working. Called the Tech. Assistance Hotline and they gave me another RA number to get another top element. On Oct. 4, got the top element and installed it. The water heater started working again. On Oct. 6, the module stated the bottom element was not working. Called the Tech. Assistant Hotline and had the plumber come out. He determined that he could not find out why it was doing this and also said that both elements were good along with the element that I removed on Oct. 4, which I still had. Since then, the module has been giving codes stating that both elements are bad and I have not had any hot water since Oct. 7. American Water Heater Co., Whirlpool, and Lowes all refuse to give me a refund for this piece of junk! All blame the other for the problems and none will take any responsibility for the water heater not working. I will never buy another appliance with the Whirlpool name and definitely will not buy anything made by American Water Heater Co. I also will never buy another appliance from Lowes as they are not willing to help me in this matter. If you do not want to experience the headache and frustration of owning a new appliance that does not work, I would suggest that you do the same!!!

Whirlpool Cabrio 8kg washing machine - Purchased this washing machine because of the size, water efficiency, no agitator. Have purchased Whirlpool products before and havent had a problem but this washing machine is absolutely a piece of garbage. At first our water bill was hugely excessive so tested the machine and it was using 269 litres per wash when it was only supposed to use 98 litre as stated on the machine. When doing 2 washes a day you can imagine the water bill we had. Lint on washing, continually out of balance no matter how much was in the wash. Had it fixed under warranty then just out of warranty. Water wouldnt turn off. Had to turn it on and off at the top lid. Could now be opened during washing cycle. Started turning itself on in the middle of the night and day. Had to unplug it to stop it, wont spin out clothes. Still sodden. After cycle finished with the lid open it would start to fill up with water again and going out of balance again. Had the appliance people out for the 4th time. Had to have the motherboard and a valve replaced. Its still leaving lint. Washing is not even getting wet so it cant possibly be cleaned. Contacted warranty people. They came out and said it is running as it should be but they advised us this is a common problem with this brand of washing machine. Personally I wish I could throw it away if I had another $900 to waste on another machine.

We moved to a new home with all new Whirlpool appliances. We have been here 4 weeks and so far the stove has had a faulty part replaced in oven and now my microwave will not fully pop popcorn. Wonder what to expect next?? If you have a choice dont buy this brand. Inferior product.

We purchased our first Whirlpool product, a washer, model WTW4800XQ 2 years ago. Started having problems with the clothes dripping wet after the wash cycle. Turns out the 2 year old washer needs a shift actuator and a wire harness that will cost close to $400 and take a week to obtain! I have had Kenmore appliances for the past 35 years. Ive never been disappointed it their performance or longevity. Each appliance lasting 15+ years and in the case of my fridge, it lasted 30 years! I am very disappointed in Whirlpool and WILL NEVER purchase another whirlpool product.

Whirlpool side by side refrigerator Gold series - I smelled something electrical burning and noticed black smoke billowing out of the back of the refrigerator. I pulled the refrigerator out and unplugged it. I took off the backing and saw a little white box that was on fire. When I unplugged it, the fire went out. I plugged the refrigerator in again and it went up in flames again. This could have been a lot worse. My smoke detector did not go off. It was 12:30 am and was getting ready for bed. If it had been an hour or so, Im afraid this could have ended a lot worse than a fridge full of groceries gone bad. I googled refrigerators catching fire. There are at least five videos with the same problems which lead me to believe there are several more out there. Why hasnt this been recalled?

We purchased our Whirlpool range a few months ago. We have the 6.1 cubic oven which is large inside with 5th element on top for keeping things warm which is a nice feature. The oven wipes easily if any spills occur. The only issue I have had is the top scratches easily. I used Creams Brute to clean the top which does well.

Whirlpool Cabrio washer (WTW6400SW2) - After a few years of working, my washing machine lists a code of F50 and will not spin. After three visits from a repair company, they couldnt fix it and said we need to buy a new one. It seems like an electronic problem, but we have to replace the whole machine. Consumer Reports says a machine should last 10-14 years. Numerous people online have stated the same issue with the same model. More than one person stated there is already a class action lawsuit on this machine? Please help. Who can afford a new expensive machine after a few years of service?

I purchased the Cabrio washer and dryer and paid for the extended warranty from Lowes about 5 years ago. After about a year, the washer had problems with excessive vibration and noise. Under Lowes warranty, a repairman came and adjusted the level. He came out several more times and made other adjustments, replaced the drum, then bearings and raised the level again. He said he could not declare the washer a lemon, even though it was because they were told this was taboo. They were instructed to do whatever they could to keep the washer going throughout the life of the warranty. Now the washer stops mid-cycle and an fl or f1 error code appears on the control board. I contacted Customer Service who said I can purchase another extended warranty for over $300 or pay their repairman for the visit including parts and labor. What I paid for the extended warranty and to purchase a new one would pay for a new washer.

In January 2016 we ordered a Whirlpool Dishwasher through Home Depot. First, Whirlpool delivered the wrong dishwasher and the installer took my old one away - leaving minimal options to correct the problem quickly. Home Depot did not make the order Model # error but they did compensate for the error. Now, with 18 months of very low use (2 in household - prewashing all the dishes) the pump on the dishwasher is gone. Before posting this review I contacted Whirlpool via email. Two weeks later I had a phone message and I returned the call only to wait for 30 minutes to get through to a customer service agent who could offer absolutely no solutions or compensation for their poor quality product or service. There needs to be a zero on the scale of STARS to reflect Whirlpools overall quality.

Oh what a tangled mess you weave! Inappropriate water usage and bad agitator. The brain is not flexible. Most of all it locks me into a contract of this is it, do or die, you have no other options but to start again. It puts my clothes in abused mode! I say no more, taxes will bring me to buy your competitor. It is very large and way too heavy to move anywhere. No!!! I will never buy another. To the point with all required letters involved, No I will not recommend this (Cabrio washing machine) to anyone, or give it to a friend!

I brought a water heater from Lowes in 2011 and I had a 6 year warranty on it which will end November 2017. Well now the water heater is leaking and they wont replace it because of the location of the water heater and they saying I need to get a direct water heater. Well what is the use of having a warranty if I cant get another water heater. I will never buy another water heater from Whirlpool! I cannot afford to get a direct water heater.

We bought the washer and dryer set almost three years ago. Great sales pitch! Energy saver, extra capacity, low water usage, Whirlpool name and I thought we were getting great quality! Three years later I am disgusted, disappointed and am junking the washer. The dryer has a new heating element that we proudly fixed ourselves after the repairmen told us that these were meant to be throwaways. We just thought he did not want to work on it. After watching several YouTube videos we had it apart and found the issue was a cracked heating element. We ordered a new one for 100$ and spent another 4 hours putting it back together. If we had to pay a repairmen to do all that the bill would have been the price of a cheap new one. Fast forward three weeks and now the washer quit and it can be one of at least 15 problems. After reading all these reviews we have decided to toss it as junk. It took forever to was a load of clothes negating any energy saving! Whirlpool should be ashamed of themselves for ripping off all of us hardworking Americans selling us junk. At one time the Whirlpool name meant you could count on a quality product! If Whirlpool really wanted to do the right thing, they would stop selling these immediately and give customers a credit toward the purchase of new washers and dryers!

Unfortunately, I can not rate this machine LESS than one star. I would rate it ZERO. We purchased the Whirlpool Cabrio washing machine model WTW7800XW0, 2 1/2 years ago in 2011. Since that time, we have had nothing but trouble from this machine. The machine basket gets off center when you have heavy items in there like jeans or a large load of towels and just stops working until you raise the lid and even out the clothing in the basket. If you wash something like a throw or a set of sheets in it, they get all twisted and wrapped around the thing in the center and end up in a big mound. We have had the glass top lid replaced on this machine TWO times over the last 2 years because the plastic frame on the lid around the glass cracked and broke and became warped in a raised position. This caused the machine to stop working because the machine will not wash clothing unless the door is locked down, and the door cant lock if the lid is cracked and warped and broken. So you have to set something heavy on top of the lid to get the lid to lock so you can wash a load of clothing! TWO times we have had repair people out to our home to replace the lid and now the lid is cracked and broken again, for the THIRD time! This is THREE broken lids in just over 2 years. Unacceptable!! The hinges on the lid that attach the lid to the machine are also rusted. This rusting has happened on all the lids that we have had replaced in the last 2 years. I will never, NEVER purchase another Whirlpool product again, EVER. Their products are inferior quality and JUNK. We have the Whirlpool dryer also to match the junk washing machine and the quality is just as bad but we are living with it because we have no choice right now. It takes 2 hours to get a load of clothing dry and forget drying jeans or towels; it takes forever! Whirlpool makes a dreadful product and their customer service is even more dreadful. =(

I purchased a Whirlpool 4.3-cu ft top load washer with a stain steel basket, in March 2020. Machine is able accommodate comforters, automatic water level adjust to loads. Washer has an extra rinse and spin feature. Low noise when operating. I would purchase washer again.

Update: My water heaters pilot light would not stay lit. After seeing the large number of similar complaints on this site, I contacted Whirlpool and asked whether they would cover the cost of labor in addition to the parts, which were under warranty. The representative was very understanding and agreed. The thermocoupler and gas valve were replaced a few days ago. It seems to be working fine. Additionally, a representative contacted me directly in response to my Consumer Affairs complaint, not knowing I had already gotten approval for the repair. He wanted to make sure I received the help that I needed and called to follow-up after the repair. Im very pleased with the response.

I really enjoy the self cleaning option on this unit. It really cleans everything without chemicals and then you just vacuum up the dust. My dislike is the ceramic top though. The top scratches really easily and hard to clean up spills during cooking. Overall I would give this stove a b rating.

The unit had all the features that we wanted and considered essential. The unit only weak issues is temperature(s) in both sections. The freezer is very poor with ice build up on the food stored for more than a couple of days. The manufacturer has been very weak in support as to how to solve this problem.

I had my Whirlpool Gold refrigerator for two years. I observed water puddling out of the bottom of the freezer about every three days. I called Whirlpool to find out if there was a recall on my problem. There was none although refrigerator repair companies said there should be as Whirlpool has a defective part. That part is the drain for the freezer as it clogs up and does not allow water to drain and then refreezes. When the freezer automatically defrosts, some ice melts and as a result the water comes out of the bottom and puddles on the floor in front of the refrigerator. I recommend that people do not buy Whirlpool refrigerators unless you are willing to pay over $200 to replace the end of the drain line in about two years.

We bought a Whirlpool Cabrio 6300 washer based off the salesmans recommendation (not very happy about this). After the warranty ran out, every time in the spin cycle, it makes a sound similar to a piece of metal banging around inside the cylinder during the cycle. Our friends have told us they had a similar experience and for their machine, they found out the bearings were going out. Weve had this machine a total of 3 years. I doubt we ever buy another item from HH Gregg plus will do our investigation on Consumer Buyers digest before we toss any more money out for a washing machine.

It is my belief that through my experience that most Gas Range manufacturers mainly Whirlpool corporation purposely designs the stove igniter part to fail in 5-10 years. They do this in hope the consumer will purchase a new stove. The igniter in my stove has failed 6 times since I purchased it in 2005. I have had to replace it at my expense each time. The last time it failed, I asked Whirlpool if they would do a good faith gesture and replace it. They very rudely refused. I will never purchase another Whirlpool appliance again and encourage others to follow me. If they give me this much grief over a simple good faith gesture, I can only imagine the difficulties in getting them to honor a warranty claim!

Its just OK, the electric cook top heats up slowly, but once heated works OK. Oven is just average! Glass cooktop stains easily and shows some discoloration in places. The glass on the oven door is also discolored on the inside and not cleanable!

I have a model ED20PK. The doors are rusting on the outside.This refrigerator was purchased by my husband who has passed, I do not have the receipt and I dont know where he purchased it. The refrigerator worked perfect. It has been in my kitchen from day of purchase. My home is adequately heated in winter and air conditioned in the summer. I have an up-scale home. I dont see any reason to replace the refrigerator, but I cannot stand the deteriorating condition of the doors.If I replace it, I will not buy a Whirlpool or any brand made by Whirlpool.The rust is not just a discoloration, it is actually rough to the touch and is getting worse day by day. If you have any answers or help I would appreciate a phone call. I am not really in an economic position to just go and buy a new refrigerator.

We purchased a stainless steel refrigerator thinking Whirlpool stood behind their product. Within days, the shelving on the door and meat bins and vegetable bins literally started chipping away and cracking. I have over a thousand dollars product held together by glue and duct tape so I can use my refrigerator. Neither Lowes or Whirlpool wanted to back their product. But it seemed they wanted to make a sale only on replacement parts... Now today I have learned my ice maker drum has chipped away... Thankful no one swallowed the plastic. We will never buy Whirlpool or recommend to our friends again.

I have purchased 2 Ikea/Whirlpool ovens in 2011 from Ikea in Canada. I have used the self clean feature on both ovens and both ovens quit completely and the doors stayed locked. This problem is discussed hundreds of times on the internet for Whirlpool, Ikea and Kitchen Aid ovens. Since they are all made by Whirlpool they are all very similar or exactly the same in some cases, as is the problem. I have discussed this with Ikea and they have said they didnt know about the problem but would help to get it fixed to my satisfaction. I have had Whirlpool authorized service repair both ovens but after trying the self clean feature again, same problem.During one of my conversations with an Ikea representative on the phone, she contacted Whirlpool and was told that if the oven was repaired 3 times and deemed by the service technician as unrepairable, Whirlpool would do a buyback. In other words according to Ikea, Whirlpool would take the oven and pay me what I paid for the oven. Well after contacting the authorized service dept (not Whirlpool itself) for the third time, they did some investigation with Whirlpool about the problem. To his and my amazement, Whirlpool has come up with a fix as of October 2013. The technician ordered the new kit and installed it in both ovens. I have since tried the self clean in one oven and this time it worked. For the information of others, Whirlpool has the kit and in it is an instruction sheet with pictures as to how to replace and install all the parts in the kit.I watched the installation, quite a process. From the instruction sheet there is a number on it. Here is the number - w10625529 rev. A 10/13. This is an instruction sheet for Ikea TOD (thermal overload device) service kit. I have looked at many of the service parts diagrams on the internet for many different current models of Ikea, Whirlpool and Kitchen Aid ovens and in most cases almost all the inside parts are the same or very very similar which leads me to the conclusion that this service kit may work in most of these ovens to correct the same problem, but I suggest checking with the appropriate service people before taking my word for it. My observation is that the kit moves the TOD off the top of the metal plate of the oven and onto a new bracket which the tech thought it was to get it further away from heat (this Im not sure of since Im not an expert). He also suggested that this kit may also be designed to allow more air flow around the oven.My only concern after having the self clean feature finally work is the heat produced inside the kitchen cabinet in which the oven is installed. Approximately an hour and a half after turning the self clean on, I felt the side of the cabinet between it and the fridge (open space), and at one area of the wood cabinet I could not hold my hand on the cabinet as it was too very hot. I will be checking the inside of the cabinet for signs of excess heat and if I see any evidence, I will again call the service people. Since the elements were not on when I checked this, I assume the self clean had finished the heat cycle and was in the process of cooling down. When I test the other oven, I will make sure the elements are still on as I can see them thru the glass door. When I checked the temperature of the outside wood cabinet using a laser thermometer, the outside wood registered 64 degrees C or 142 F approximately. Not sure what the inside temperature was as the oven was still in place. Hopefully I will not get a higher reading when the self clean is at its maximum temperature in the cleaning cycle. Will the oven create any problems in the future for the cabinet, I hope not but time will tell. For clarification, the cabinets were built by a kitchen cabinet company using the instruction sheet that came with the ovens. I hope some of this will be of help to some of the hundreds of people who have posted this very same problem on the internet. When you have paid for an appliance you wanted because of the features it came with, it should provide you with what you paid for and not constantly break down. Im lucky as they came with a 5-year warranty so it hasnt cost me anything yet and hopefully wont in the future. Good luck to all in getting this resolved for all of you.

I have had 6 months of absolute HELL working with Whirlpool. I mistakenly purchased a Whirlpool Refrigerator from Home Depot and the moment I did Home Depot were hands off. Sadly my brand new refrigerator didnt work from the moment it arrived. The ice machine was dripping inside from the back making all the ice freeze together and created an ice sheet below the ice box that can be taken out. There also was water dripping out of the ice output. The water output wasnt working and the water was literally trickling out when you pushed for water.SO Whirlpool took 6 weeks to send their 1st technician from L.A.R Services out of Boston and the guy turned up and said it was due to needing a new ice tray/machine and our sink having an old filter. There was NO filter on the sink! And he then ordered an ice machine that arrived at their office in 4 weeks but they took 3 weeks to try to deliver it. When they finally came out they called to say they had to turn around because the road was blocked- there are 3 ways to get to our home....so I had to chase for 2 more weeks to get them to come back out. When they arrived they handed me the ice tray outside and drove off!!!SO WE TRIED AGAIN and this time had Home Depot call Whirlpool to get a service person in to fix it. We had to wait another 5 weeks and when he finally came he claimed our issue was due to the fridge not being perfectly level. Well, guess what, its now level and the ice is still freezing into giant blocks, some weird plastic strap is hanging inside the ice box and the water is still trickling out.Ive called the service guy 3 times and he is yet to call back and right now Im on hold with Whirlpool (its been 14 mins so far). NEVER AGAIN will I buy anything WHIRLPOOL and I will be sharing this experience in every consumer space possible so no one has to go through what we have. Our new fridge is still broken after 6 months!! All I want is my GE fridge again and I should have a followed the reviews.

Bought a Whirlpool Fridge WRS321SDHZ00 and it has been services three times in one year. It has been down for at least one month at this point due to all the service. Service History- Oct 15th 2018 - Fridge/ freezer started not cooling (Issues started) Oct,19th 2018 - Failed defrost (Tech Diagnosed) Nov 13th 2018 - Control was replaced, defrost heater replaced (Service performed) April 10th 2018 - Fridge started not cooling again (Issues started) April 15th 2018 - Tech diagnosed failed UI board (Tech Diagnosed) April 17th 2019 - Replaced failed UI for water/freezer dispenser (Service performed) May 23 2019 - Fridge started not cooling again (Issues started) May 23 2019 - Tech came out and diagnosed the issues as defrost thermometer (Tech Diagnosed) (They initially wanted the tech to come out May 28th but I had to explain this was not acceptable as I can not continue to be without a fridge like this) May 23 2019 - Request to have the fridge replaced.May 24th 2019 - Whirlpool called to notify they would replace the fridge.

The technician that was here to repair my propane water heater called Whirlpool to get help with the problem. The pilot would not stay lit, they would not help him. I told him it was installed in a mobile home and he had to cap the gas to the heater, it was still under warranty. Later I found out there was a recall on this heater and that probably was the reason they told him that. I ordered a water heater just for mobiles and am in the process of getting it installed. I kept the old heater for now and will still pursue this issue under the warranty.

We purchased a mobile home in 2008 that had all Whirlpool appliances. The microwave quit working 2 times before the warranty was expired. They paid to have it fixed. After the warranty expired it quit working again when it was about 3 years old. I called the repairman and he said it might be the most expensive part in it, so it would probably be cheaper to buy another one. I had to buy the same model because it was a built in microwave and I couldnt find another one to fit. It quit working about 2 months before it was 2 years old. I called the company and they were polite but said they couldnt do anything since it was out of warranty. I have been through two of these same models in 5 years. It ought to be against the law to sell such junk.

Whirlpool Cabria Washing Machine hold down switched failed in just 18 months of use. It took the Technician 5 days to serviced and repair our Whirlpool top loading washing machine. The washer is till acting up and stop working unless you put a weight on the top loader cover.

I owned a Kenmore washer for approx. 20 yrs that endured 6 kids for most of that time period. When time came for a new one, I had to have the latest model, and settled on a Maytag Bravos approx 3 yrs ago. This was a huge mistake - I paid between 600-800 for this machine, and it is a piece of garbage. The repairmen here yesterday explained to me that Maytag and Whirlpool are now the same company, and also that all these machines are now made overseas because of cheap labor. In a nutshell, I was given an estimate of at least 300 to repair this piece of crap - he explained that they are only made to last a few yrs -where is the justice in this situation? I really dont get how these big companies get away with selling crap, knowing all the while that the consumer is getting screwed - yet people continue to buy them..

Bought a Whirlpool hot water heater from Lowes 1/08/12. In May of 2013, it would not work. I had to replace the Gas Control for around $100.00. It was 4 months off warranty! The same thing happens 3/2014. They sent me a new Gas Control Valve free and shipped it overnight. This is no fun to fix. I cannot believe that I need to flush the tank out with cider vinegar every 6 months. That is why I was told it keeps breaking.

Whirlpool Cabrio Washer WTW7340XW sounds like a small jet during spin cycle. The Whirlpool Cabrio Washers have a very well known and well documented problem with the tub bearings failing. Many many disgruntled owners have posted their complaints online, and there are many videos showing the issue on youtube. This issue is so prevalent that the manufacturer has created a tub bearing failure repair kit for $350. The repair is so expensive and labor intensive that many of the certified Whirlpool repair shops no longer work on the Cabrio washer stating that a better washer can be purchased for the cost of this repair.That said, the manufacturers customer service group denies that the Cabrio tub bearing failures is a common problem and are quick to state that Whirlpool holds no liability for this problem. Ramping the complaint up to a customer service supervisor is met with the same canned response. Regardless of the thousands of complaints Whirlpool is claiming that it is normal wear and tear for the tub bearings to fail. The manufacturer should recall the units for this manufacturing defect in the Cabrio design.

We bought the Whirlpool Gold series side-by-side about 2 years ago with an ice maker in the door and with this design, the ice bucket is on the inside of the door, which we thought was a very clever design, taking up less freezer space. Well, to remove the ice bucket, we had to use a blow dryer because even though you press the button which is supposed to disengage the bucket from the door, it has always been frozen onto the base.Then we started having issues of water leaking from the ice maker. It turns out, that the lever that controls the chute was broken. We called a certified Whirlpool technician to come out to fix the ice maker dispenser lever. Well as it turns out, it cannot be fixed. It is a sealed in the door unit and to fix it, we have to replace the door, a repair estimate for door and labor is approximately $800. That is absurd.I contacted Whirlpool and was told that my refrigerator is out of warranty and that there is not an option to repair the dispenser. There is nothing we can do. I said that according to the repairman, we are not the first to report this problem. When I contacted Whirlpool I was told there is no recall for this item. We purchased the Whirlpool based on the reputation that it has had in the past and the good product we have in a Maytag (which is associated with Whirlpool) dishwasher. Well, never again are we going to purchase a Whirlpool or any of its subsidiaries products. I have read so many unhappy customers here that I cannot believe that Whirlpool continues to make such inferior products or designs.

We have an 8-year-old built-in Whirlpool Estate. It is probably as basic a model as you can get. It has been 100% reliable, and cleans the dishes well, even without rinsing. We do not buy expensive premium dishwasher detergents, either. So far, we have required no repairs. Basic features--heavy wash, normal wash, pots and pans. This dishwasher is standard (not extra large.) This is not a fancy dishwasher--just white. It is what matches the rest of the appliances. We have been lucky regarding the performance of such an inexpensive dishwasher. We paid about $250 for it.

We purchased a Whirlpool Duet front load washing machine Model #WFW9550WL in July 2009. In July 2016, the guide on the door hinge broke, making the machine unusable. When performing a national search for the part number (#8183202) to replace the broken hinge, I found that there were none available anywhere in the United States. When talking to Whirlpool, they indicated that during 2015, they only sold 142 of this part, and were currently looking for a new manufacturer for the part. They further indicated that the part would not be available until late September or early October of this year.

A top loading washing machine with an agitator in my opinion, gets my clothes 100xs cleaner than one without. Ive owned front loaders and top without agitators. Never again. Top with agitator is my personal preference from now on. Also Whirlpool has never failed me unlike other brands.

I have Whirlpool fridge for a very long time since I own my house and for me is one of the best, is a great company and occasionally have to fix in a couple of times and afraid to buy another more modern and not last like this old fridge.

Absolutely terrible product. Have had nothing but problems with it since I got it. After 4 months the pilot started going out every couple of days. Would have to vacuum the filter just to get it to light. They eventually sent me a screen to wrap around the bottom, that would only extend the interval to maybe a week instead of going out every few days. Now tonight it wont even relight! So tomorrow Im buying another heater and throwing this piece of junk out, a waste of $750.00 for two years of headaches. Dont, trust me. Dont buy this garbage of a water heater. And like others I bought it a Lowes, done with both of these stores!

I had a Whirlpool Natural Gas Water Heater professionally installed on 2-27-2107. This unit came with a Honeywell controller and thermopile assembly. Today is 05-18-2019 and the unit is not inoperative. The pilot is lit but the burner wont light. Here are the issues that I have come across so far: When I go to the Whirlpool site there is no direct link to Whirlpool water heaters, just kitchen appliances and washer/dryers. When I click on parts and accessories link it gives links to washers, dryers or pedestals. Again... No information about water heaters. I scroll down to the bottom of this page and I see a link to All Replacement Parts When I click that it takes me to another site managed by RepairClinic. When I enter the model number for the water heater it says Not Found. I entered the part number for the thermopile on the tag on the orange wire #321165-002 and 100078039 and again it returns as Part Not Found.Its obvious that Whirlpool is putting little effort into supporting their water heaters or their customers. I called their support line and they were able to order the thermopile assembly for $55 plus $27.95 in shipping to get it here by Tuesday. Today is Saturday. So that means almost 4 days without hot water. And since this water heater was a warranty replacement for a previous one that went bad they will not cover the cost of replacement parts for the thermopile. Lesson learned: No more Whirlpool purchases for any of their appliances.

Top load stackable Washer dryer - Model number YWET 3300XQO. I had two floods with the same washer dryer unit. The first flood occurred in April 2012 and thousands of dollars were paid to repair the home that was damaged due to this flooding. The second flooding happened in October 2012 with the same machine at the same home. This time there were other Whirlpool owners that also suffered with the same issue with the same model Whirlpool machine. Whirlpool acknowledged that they will pay out to fix the damages and the deductibles but to date they are simply playing games on paying out. This is 15 months after the first flooding happened.

Model WRS586FIEMO1, Serial # HR50801958. In December ice maker stopped dispensing due to cubes melting and clogging around the auger. After 3 service calls a new door was ordered with a delivery time of 4 o 6 weeks. Have spoken to and e-mailed several customer service people and am told it will be another 4 to 6 weeks. This has happened at least 3 times. In the meantime I must empty and clean the ice bin and surroundings every night or it freezes up and cannot be removed at all. Finally told them I no longer want a new door, I want a different model fridge. Was told they do not replace, only repair. It is now April and they have done neither. They did extend my warranty until December but at this rate that too will run out. Would never buy another Whirlpool appliance or any of the other brands that manufacture.

Bought washer just under three years ago and the tub bearing started to sound like a jet airplane. Whirlpool seems to have an ongoing issue with the tub seal which goes bad and then allows water to enter the bearing which then fails. Whirlpool will not make it right, I guess I will have to plan on a $350 repair every two to three years if I keep this machine. I am very disappointed with whirlpool for not standing behind what is a known problem. They should replace these seals under warranty so that the Bearing does not fail. Thats my opinion, recall the seals and fix a bad design problem. I would not recommend ANY whirlpool products to anyone at this point. What other problems do they have with their other products?

We have had our Whirlpool range for probably 20 years. We have never had any issues or problems with it. Our washer and dryer are both Whirlpool too. I would recommend this brand 100%! I think this is the brand that my mom always had too. Their products are very well made and last forever (it seems like they do!).

I have had a Whirlpool washer for less than 1 year and have had it serviced over 7 times with drain problems - code A10 being displayed. Have not been able to resolve the problem with neither the dealer nor the manufacturer. What a lemon!

We bought a gas Whirlpool Stove from Lowes. We noticed it was not heating like our last stove and thought maybe because it was new. No the stove does not heat properly at all. I cooked a pork loin for 40 minutes at 350 and it was still raw in the middle. I have had to cook everything on 375 which makes the door handles and knobs very hot. I called Lowes and they patched me into Whirlpool after a 45 minute wait. The rep from Whirlpool said, you can look at the manual and figure out how to calibrate it. No I cant. I have a warranty that is what it is suppose to cover. Then I was on hold for another 20 minutes. Really no one should tell you to read a manual to fix a gas stove. I will not buy another Whirlpool item. Poor customer service and that make you feel you are bothering them.

Our dishwasher stopped working after 13 months. We are a family of 2 and use it once a week. We called Whirlpool and were told since it is past 12 months, they would do nothing but give us the name of a repairman in the area. We called our own repairman and $120 later, the sensor that had malfunctioned was replaced. Quite costly on a $450 dishwasher. Now, after 15 months, the handle on the lower broiler portion of my Range has come off and the screws will not hold because the plastic around them deteriorated. I just called customer service once again, knowing what I would be told and YES was told So sorry, nothing we can do. A new handle will be $45 plus shipping. We bought the refrigerator at that same time and every day, I wait for this appliance to have issues. In summary, Whirlpool/Maytag appliances are obviously made to be disposable after 12 months. They do not stand behind their products and I would not recommend them to anyone.

Pilot light will not lit. I called Whirlpool. They said they could ship me a replacement for $34 or I could go to Lowes and get one for free. Lowes said they were out of type C kits and they have not received replacement kits for 6 months. Lowes informed me about the recall for this part. If its a defective part, Whirlpool should be sending this to me for free. I will not be buying a Whirlpool water heater next time.

When you purchase a Cabrio high efficiency washer dont expect clean clothes! But, you can expect holes, torn and, smelly clothes. It takes a ridiculous amount of time to wash. The machine I purchased has a glass top but its dark and you cant see into the machine so that was a waste of money! If you wash clothes in 1/4 depth of water, nothing gets clean. Who even designed this disaster? I had enough common sense to know it was going to be bad but the salesman at Lowes informed me that ALL washers were high-efficiency and getting a tub full of water days are over. I wish we wouldve just paid for repair and kept my old washer. I hate doing laundry with this machine! I use to be able to wash my blankets, pillows, curtains, throw rugs, even car mats with no problems. Not anymore! This machine couldnt handle it. You ought to see my sheets and shirts when theyre done. They come out twisted up so tight I have to untangle them before they go to dryer. What a horrible nightmare of a machine! If we were not out so much money Id send this machine to the junkyard and get a real washer with realistic amounts of water! How are you saving anything when clothes require 2 times to get somewhat clean??? If youre reading this and considering a high-efficiency washing machine, DONT DO IT!! You will regret it. Im counting the days when I can junk mine!

May 16 - July 25, 2014. Took almost nine weeks to get the replacement. Numerous service calls. Their tech said self-clean feature should never be used. In addition, I heard that the techs are only paid for one service call, no matter how many times they come. And, they cant fix this oven. It has to be replaced. Nightmare and very dangerous. Most American families cannot wait nine weeks for a new oven to be fixed/replaced.

Purchased a 80 gallon Whirlpool Water Heater with a Life Time Warranty. When it overflowed because the system failed to detect the water temperature, called and they sent in the temp sensor (I paid for shipping). Had plumber replace it. One day later the same thing happened, called and they sent in a board. Same exact thing happened. By this time, Im without hot water for over 2 weeks in dead cold January on the East coast. They will replace the water heater but only a 50 gallon NOT the 80 because they no longer manufactured the 80. Option given by Lowes is to add a recirculating pump to give additional gallons. But, of course Whirlpool said NO. They only can give me the 50 gallon. What a ripoff!!! Please, please DO NOT purchase any product from Whirlpool. Now they change the same to A.O. Smith Signature Premier.

The new? improved model with NO center agitator is the worst - clothes tangle badly and the load becomes very unbalanced, wobbly and noisy. How I got talked into this model by a Sears salespeople was a big mistake!!!

Cabrio Top Washer - Disappointed!! Its selling point was using less water but do they realize that you DO have to use a little water to clean clothes. Leaves residue on every load and where I have to use the extra rinse cycle and that still doesnt work. This product is going on eBay today! Never again Whirlpool.

I got the works; the stove, dishwasher and refrigerator. I cannot believe all the BS you got to do to baby these appliances. If I had designed this mess... I would not be selling it. Every one of the appliances has a issue... the oven takes a long time just to cook toast. I would send them all back... but from what I have been told this is it. They all suck! I sure wish I had my older appliances back. I see the city dump in their future! I got the black stainless. Believe me I am not happy at all. The repair people have already had to fix or replace parts and I have not had this stuff for 30 days yet.

LED Freezer Lamp stopped after eight months, $14, not covered under warranty. OEM water filters are costly. Icemaker is noisy, ice dispenser chute clogs. When refrigerator was set at 38-40 degrees the eggs and most top and middle shelf items partially froze. Noisy compressor. Good price from Home Depot sale in Nov. 2019.

Bought the oven Model RBS275PRS 7 years ago. Since then door handle broke 4 times! Control panel had to be replaced once. Paid $750. Spent over $500 in repair. Now handle broke again but part discontinued. Can throw the oven away...

I purchased Whirlpool Refrigerator model WRF989SDAM02 in June of 2014. I began having problems with the ice forming into a solid block shortly after having the refrigerator installed. I called for service several times over the next year trying to rectify the problem. Once the warranty had expired I continued upon the advice of Whirlpool Customer Service to schedule their certified Technicians to work on the problem. A year and a half and several hundred dollars later I am still unable to get ice cubes when desired.Ultimately I was advised that I would need to use the ice maker once a day to keep it from forming into a block. When this didnt solve the problem I again contacted Whirlpool, had another of their recommended service technician come and give his advice. I was told that the ice maker needs to be in constant use or it forms a block and this is a defect in the design of this unit. A Pro Tech Appliance Inc. Technician, an authorized Whirlpool technical representative, said the only way to have usage of ice would be if I made sure to dispense ice a minimum of 8-10 times a day.This is completely impractical and just plain ridiculous. I contacted Whirlpool again. They refuse to acknowledge this is a defect in the design of this model. I have replaced all parts that can be replaced, had the unit resealed and have paid for multiple service call. Whirlpool will provide no remedy for this problem. Now that the unit is out of warranty they have refused to provide a resolution even though its issue began while still covered under the year warranty. The ice in the ice maker is completely unusable and melts into a solid block within 24 hours if not in continual use.

Purchase 2009 Duet Washer & Dryer (WFW9700VW00). Recently have had error codes coming up - F35 for one. Could not get washer to reset. Had to keep unplugging and plugging back in. Service was called and the tech knew right away what was wrong. He ordered and installed an analog pressure switch. While he was working he mentioned that this was a known error and if we had called with this problem a couple years ago Whirlpool would have replaced the washer. Im not looking for a replacement but I feel Whirlpool should cover the part having been a known issue.

Bought a Maytag Bravo XL Top-Loading Washer Model MVWB880BWO. It was installed on Jan 22, 2014. In December, the spin cycle became very loud. I contacted Whirlpool on Dec. 2. They said a local technician would be out on Dec 5. They make up this date. I called the local technician. They came out on Dec 16. I was informed that if there was nothing wrong with the washer, I would have to pay for the service call. The tech. found there was a bearing problem. He said they would contact Whirlpool about the warranty repair. Had not heard from the repair shop. Today is Jan 5. I called the local repair shop. They said they were waiting to hear from Whirlpool. I called Whirlpool. (Thats another nightmare). They said they were waiting to hear from the tech. The man at the repair shop said he has been trying to get a hold of the rep for our area in Eureka, CA. Apparently he doesnt return emails when he is in training and apparently he is in training most of the time. It is totally unacceptable to have to wait for over a month to have a washer repaired. Not sure what a consumers recourse is for getting something that is under warranty repaired in a timely manner. Maytag used to be a good product. Since Whirlpool produces the Maytag, the quality just is not there. Very poor service. I would not recommend buying Whirlpool. You will not be happy with their product or their service.

We bought our dishwasher April 2018. This morning I noticed the paint had bubbled above the heat vent (area 3x 1/2). Upon closer inspection, the the paint was also peeling. We called the company to see if they would replace the skin but the agent said the only thing they could do was send us touch-up paint. The door is considered cosmetic & only covered for 30 days. If we wanted to replace the door panel, we were welcome to buy one from them. However as this seems to be a manufacturing defect, we would be replacing the door every 16 months. When we realized whirlpool wouldnt back their product, my husband looked a little closer to see what needed to be done & found that it had rusted under the paint & painting on top of rust will adhere properly.

I bought two Whirlpool (Model: bfg1j4o4t3nov4o) natural gas water heaters. The pilot light would go out to so I re-lit it and sit in the attic until the water got hot and the burner go out. But before the burner went out, I could see the flame go from blue to yellow and hear the water dripping down on the burner. So, after the burner goes out, the water would drip down on the pilot light putting it out.They sent me a thermo coupling for free but that was never the problem. The problem is that the water heaters are poorly insulated which causes the water to drip down on the pilot, putting it out. To make a long story short, no part they send will fix these heaters. I have a GE heater in my house for 20 plus years and it is still kicking. I should have went back with that same heater.For some good news, I got my money back from Lowes. I raised so much hell in that store that the manger gave me my money back just to get me out of his store. I made them realize that all we want is our hard-earned money back from a product that does not work.

I bought a new Whirlpool electric range in the spring of 2008 and purchased the extended warranty from Leons. The oven worked fine for the first three & 1/2 years, but then the bottom element in the oven seemed to have stopped working. The top element would still come on, in an effort to keep the oven at temperature, but was not effective.I called in a repair. The technician showed up, turned the oven on, noted that the bottom element did not come on properly & replaced the motherboard in the control panel with no further diagnosis. The oven worked for approximately 9 months and then the problem recurred. I called in another warranty repair. This time when the technician showed up, he turned the oven on & told me he was going to order a new bottom element, which he installed about a week later, again, with no further diagnosis.Now, here we are again, one month off warranty and 6 mos since the last repair, and again, the bottom element in the oven is not working correctly. I reported the issue & my dissatisfaction to Whirlpool and was basically told, How sad, too bad - hardware components fail and theres nothing we are going to do about it. Seriously? This range is just barely 5 years old and has a history of repeated problems with the bake function - obviously, something is defective in this product.I can see it, if I had not had any problems until this point, but when the same issue keeps coming up & obviously has not been correctly diagnosed and repaired, I would think they would have enough integrity to offer some kind of help or solution. Given the history here, its highly unlikely that Im going to be willing to spend big bucks on another attempted repair that, in all likelihood, will be merely a short term band-aid, so Ill probably have to buy another new range - which I cant really afford right now. Trust me, it will not be a Whirlpool & it will not be from Leons.

Bought this machine June 23, 2016. First use, I called Lowes where I purchased it to say there is something wrong as it makes a grinding noise. I was informed that is normal for agitatorless machines. I asked if he could hear the noise, and he said yes, thats it. So I disconnected thinking, Wow, who makes a machine in todays technology that is so loud you think something or someone is in serious pain?! Now am at the point where I want this design in pain out of my house! Going to Lowes today to try and talk rationally for a complete refund so I can purchase an LG or Samsung which is what I should have done originally.

Like the load sensor feature the best, so economical, the drum is oversized to wash duvets and heavy blankets. The fact that the washer and dryer are stackable makes them ideal for apartment living.

We purchased a top loading Whirlpool Cabrio washing machine, Model #WTW8040DWO from Lowe’s on October 15, 2015. Since that time, we have had a service call on three separate occasions. The last service call, the service technician got Whirlpool on the phone with their technician. The washing machine would get stuck at 40 minutes and would continue to fill with water, drain and fill with water and would never progress.After the service technician talked with Whirlpool technician, it was explained the machines electronics were so sensitive that the washing machine had to be on an independent CIRCUIT (meaning absolutely nothing else can be plugged into the circuit). We contacted Whirlpool indicating that was not acceptable. Very few, if any houses, have a washing machine on an independent CIRCUIT. Whirlpools response - I have an independent circuit for every appliance in the house. Obviously, she does not know what a circuit is. Totally disgusted. Will NEVER buy another whirlpool product again. Horrible product and horrible customer service.

My Whirlpool Cabrio washing machine. f1 keeps showing up on washer on. Shuts off again and again.

After a days work Old Grumpy around 7:00 PM drags to sink, fills pan with hot water & soap; starts scrubbing forks, spoons & occasional cereal bowl. I prewash everything placing it in the dishwasher, it takes it a week to reach 3/4 full: use for sanitation.

The washing machine does not wash the clothes. It does not clean the clothes and goes off balance all the time. I have had it 9 months and waited to write the review to make sure I using it properly and giving it a chance but to no avail. It is awful. It leaves white lines on the dark clothes and does not take makeup stains out of the white towels. Those are just a few examples. The clothes have to be washed sometimes twice to feel they are clean enough. So it is not cost effective and uses more water which is counter productive to the HE.

I bought my Whirlpool Duet set with pedestal in February 2008. I just had a tech here to figure out why my machine is so loud during agitation and that I cant hear anything else. He said its the drum hitting something. I never overload my machine - just normal use for 4 years. It costs more to repair the machine than to buy a new one. Now, after seeing this information, Im not the only one who has this problem with my Whirlpool washer. I am disappointed that there isnt anything else the Whirlpool company tech can do for me - just a receipt that shows the parts alone cost $600.00. Now, I have to pay about $50.00 just to get rid of what from the outside looks like a perfectly good machine.

I have called Whirlpool six times to request a replacement for a broken deli drawer in my refrigerator. I was told to throw everything away from the unit, since the whole assembly would come complete in the mail. First call: Ordered the replacement: what came was a glass shelf without a drawer or gliders and hardware. Second call: requested the drawer and remaining parts. Third call: only received the plastic drawer without any means of installing it. Fourth call: received only one side glider, again without hardware to install. Fifth call: requested a supervisor (Kimberly) who took the order for the remaining glider and all hardware. Received second glider and (1) screw when two are needed.Sixth call: asked rep Brigitte for a supervisor and was not connected. Given the run around and told that the rep spoke with a supervisor for me and would send out a repairman to assemble the unit. I just need the missing screw. I have spent a lot of time on the phone trying to get what I need from Whirlpool and do not have time to wait for a service repairman to come out. I just cannot fathom how that many calls - with me being patient and calm - cannot produce the required items. Horrible.

I have had to replace the thermostat 3 times. Worst fridge I have ever owned. Lost lots of food and time and money that I will never get back. I will never ever buy another Whirlpool product again. Aint got time for that.

Bought a Whirlpool Cabrio. Noticed it was getting really loud less than a year into owning it. Called while it was under warranty. The tech said it was fine. Within the next year and a half it got so loud, you cant hear anything else in the house while it is running. Now it is leaking from the tub seals and the bearings are going out according to two service techs I have had come look at it. They say it is more expensive to fix than the washer is even worth. This is due to the parts that would be used to fix it are the same cheap Whirlpool parts that were put in it in the first place. They both said that these are not good washers and commonly go out about a year and half to three years old. Shame on Whirlpool for making such a low quality product and not being willing to do anything about it.

We been having the same issues as all of the people that have consumed the water heater. We have replaced the pilot more than 3 times and other parts of this water heater! Well, we are a family of 9 and the only way we can shower is by heating up water like everyone that has the same issue.So I would never recommend this (Whirlpool) water heater to anyone!

After having an expensive front loader (ugh) we purchased the Whirlpool Cabrio top loader (wow)! Best washer ever owned, wouldn’t trade it for any on the market! It has been as great and problem free as the front loader was terrible with cleaning and smell.

The wife and I are retired and when it came time to purchase a new washer, we thought we would spend the money and buy top of the line so it would possibly outlast us. So we went to Lowes and spent $1000.00 plus on a Cabrio. Within the first year, the control board went bad, replaced under warranty, now no matter how little or much of a load the wife puts in this piece of crap, it goes off balance!!!Of course as previously stated, customer service doesnt give a crap because we also saw no need for an extended warranty having made such a large investment in a washing machine that we thought was built with a high standard of quality, SHAME ON US, SHAME ON YOU, WHIRLPOOL!!! You have lost a customer who has been buying your products for a long time but will never buy another and will be warning everyone we can to do the same.

5 years and 11 months ago I bought a 50 gallon gas, Whirlpool hot water heater with a 6-year warranty from Lowes. The 2007 water heaters were on sale, so I paid $329 for it. Within 6 months, I replaced the gas valve, and a few months after that, the thermo-couple went out and I replace that. Each time I called Whirlpool and got return authorization numbers for the parts, I still ended up paying for the parts plus labor. A year after that, the igniter went out and I had that replaced. Last year (the day before Thanksgiving), the thermo-couple went out again and I had to have that replaced - and it cost me for the part plus the labor - even though I had a return authorization number. I also replaced the water line connections/hoses to the water heater at that time. The customer service rep for Whirlpool told me at that time if I had another problem with the water heater, they would replace it for free - and the warranty was good until Dec 31, 2013 (this year). NOTE: Every plumber that has come out to fix the water heater and replace the parts stated that they see a myriad of problems with Whirlpool water heaters. They said the parts like the thermo-couples, igniters, gas valves, etc are poorly built and they replace them all the time. On Christmas Eve 2013 (two days ago), the water heater started leaking from the top by the valves - and so much pressure had built up in the heater the new water hose connections burst, spewing water all over the heater closet. I called Whirlpool the day after Christmas (today). At first, they told me they would not replace the heater as it was not in warranty and then I told them what I was told by the service rep last year. She finally agreed that my heater is indeed under warranty and gave me a replacement authorization number but she told me my warranty did not cover labor. I called Lowes. At first, they told me I would have to remove the old hot water heater myself and bring it back to the store in order to get my replacement. I am a 59 year old woman and I take care of my brother, a disable veteran. Although I am in good shape and healthy, I dont have anyone to help me get the gas and water disconnected and help me lift it into my Suburban. The man at Lowes agreed to bring out the the replacement heater and pick up the old one at no charge, but I will still have to pay $299 plus the cost of new hoses to have it installed. By the time the replacement one is installed, I will have paid a little over $1200 for a $329 water heater. I could have installed a tankless one for that, but I cannot see spending that kind of money right after Christmas. If I have one issue with this replacement, I will install a tankless water heater - and it will not be made by Whirlpool or any of its affiliates. My recommendation would be to steer clear of Whirlpool and their products.

My front loading machine is moldy and smells terrible ALL THE TIME -- I hate this machine and will never ever buy one like this again. I spend more money on cleaner than I do on actual laundry soap.

I have purchased a 3 door Refrigerator of Whirlpool on 27th October, 2014 from Sargam India Electronics Pvt Ltd. Now my refrigerator was not working properly. So we registered a complaint regarding same. On 3rd July your one executive came and he asked that its compressor is not working and we have to refill gas also and charges will be 2000 rupees for Gas and compressor is under warranty. Then on 4th July your another executive came with compressor and he worked for 1 hr on fridge then he asked, Compressor is not taking load. My senior will come tomorrow, mujh se nahi ho raha. On 5th July morning we got a call and he asked that he will come till evening. Now we got a call. They are asking that its not under warranty. Hum log paso mai dhik kar sakte hai. When purchased in 2014 last ist thing its under warranty only they have told us for 10 yrs. And we have purchased 4 yrs + back not 5 yrs completed. Apart from your customer service guys we never shown this to any one else as its under warranty, I am clearing this thing on prior notice. Senior are not taking action. They are asking we can do it in money. They are asking, If you want to go consumer court you can go.

We purchased a Whirlpool fridge from Future Shop four years ago. It was delivered by professional movers and we plugged it in and smoke filled the house. We called Future Shop and very soon, another fridge arrived on the back of a pickup truck (no box or papers, etc.). This fridge is slowly ruining our kitchen floor as from time to time, we notice a puddle of water leaking from under the fridge. We called the store a few times but were told its normal for a fridge to do that in hot weather.

It seems the quality issue of the LED of the washer Whirlpool Cabrio. It was broken from the screw part of the glass and the plastic/alloy and the glass. They would charge me $416 to replace the LED but I rejected and was still required to pay $85 for labor fee. I called the company and they didnt admit that was a quality issue but I just found many consumers had the same problem. If someone would like to have a lawsuit, please contact me and I will join.

Ive read the reviews on this appliance. First of all the all of the washing machine being manufactured are designed to save energy and water. The water is loaded in the machine based on the WEIGHT of the clothes. the washing machines no longer have the features to (small, medium, large load) so the consumer can fill the machine. Having said that, most sales representatives will tell you appliances manufactured today are no longer designed to last 15-20 years, although they are way more expensive than the workhorses made in the past.I got rid of my fancy Samsung washing machine because it broke down at least 4 times within the first year of purchase and decided to go with the whirlpool because Ive had a workhorse in the past that was worked excellent. I love the fact the washers no longer have the agitator in the middle which allow me to wash my king sized bedding without the machine becoming unbalanced or making a lot of noise. So far the Whirlpool Cabrio washer and dryer is working very well. Id rather give the Whirlpool a chance any day over the new johnny come latelys, which are more aesthetically pleasing to the eyes but are failing miserably in performance. I also love my Cabrio 8.8 dryer. They both work better than the Samsung models I got rid of.

Always buy an extended warranty if you are going to buy a washing machine. Mine cost $129.00 extra and it is not through Whirlpool. Three control panels and two tub bearings later, the extended warranty insurance carrier gave us our money back to buy another machine. My wife loves the operation of the Cabrio, so we bought a WTW8200YW today, in the false hope that it will work much better. We have an extra washing machine in the garage for the three week period before repairs. The serviceman has to come look to verify the problem, then come back when the part arrives.

I bought an electric range at Lowes. The oven stopped working after 10 months, which means it is still under warranty. A repairman came out twice and put in new parts. He said all had been replaced that could be replaced. I will call him again and see if he can do anymore. I dont think I will buy from Lowe’s anymore and certainly not a Whirlpool.

I am 72 years old and this Whirlpool Energy Star HE Washing Machine is just useless. It does not clean clothes properly. It always leaves a stinky washing machine smell which never goes away despite no matter what you do. A completely useless, faulty washing machine! Never ever buy a Whirlpool HE washing machine! Some websites say that you need to buy a washer fan at a cost of $69.99 and attach it to the back of your washing machine as this is the only way you can get rid of the smell. Who has that kind of money? Why is this fan not already included in this washing machine if Whirlpool is aware of the smelly washing machine/smelly clothes problem? This is such a joke! We would like to be reimbursed for our deficient Whirlpool Washing Machine or at the very least, have a recall of this inefficient, poorly designed washing machine. Report them to the Better Business Bureau and anyone else you think can resolve this problem - thanks!! - Unhappy camper

Just bought two new Whirlpool water heaters, $469 each. Not impressed. One of the MANY issues: water leaking from the top. Reason: before installing, if you look inside female threads, you may see a rubber gasket (heat loss valve). One of the two heaters of mine was missing one. This showed me what the quality of the joint was like under the gasket. I temporarily removed the other three (two heaters) to confirm what I saw: At the backside of the threads there should be a clean flat landing from which to the male nipple should tighten against (washer in-between). Instead, there is a disaster of a flimsey lip (washer-like) which is torn up and not anything close to flush. Bad Whirlpool! Bad quality control!

I have a 5yr warranty. Im 3yrs in on the 3rd repair. Horrible. This time they cant get the part and Ive been dealing with them for 5 almost 6 months. I spend countless hours on hold trying to get a real person... When I do they send me to someone else where the queue starts over. I paid $400 extra to just have them replace the fridge and its been over a month and they cant even get a new one delivered. Just refund my money! This is beyond the pale. Dale, Sunrise Beach Mo.

We bought a Whirlpool front load about six years ago. We have had nothing but trouble with since we have owned it. First, the sensors went out on it. We had to pay over $300 to have that fixed. Then, it wouldnt run right. We had to pay another charge for that. Now they tell me the water valve is bad on it. If I had known at the time the problems I was going to experience with this washer, I would never have bought it. I fell for the price. We paid for it. We should be getting better service from it than we are. I could have bought 6 regular washers for what I paid for this one that doesnt perform like it should.

Terrible! I bought the washer in December of 2010. We began finding holes in clothes in March of 2011. We found that we had a small crack in our dryer. After trying to fix it ourselves, the crack came back. So, we replaced the dryer. After we replaced the dryer, we began to find more holes in our clothes. It was not the dryer causing the holes, but our duet Whirlpool washer. We had several drain error instances as well. We have had the service repair man out several times for the drain error problem. Ranging from a Mardi Gras bead in the drain pump, to several baby socks to a large adult tube sock. Id say its been at least 7 times.We had finally had enough of our clothes, which I would estimate to be at least $500 worth of clothing, the service repair man said he had never seen anything like it. That was in November of 2011. They said they would replace the tub and drum system but it would take several weeks to get the part in, which took us past our warranty. After numerous complaints, Whirlpool offered the best they could do, that was to extend our warranty (6 additional months). The first drum was broken upon delivery, so another would have to be ordered. There goes another week. Finally it came in. We were all but assured the problem would be fixed.Two days later, same drain error code! 3 more socks caught in the drain pump! Took the socks out myself after watching them do it so I didnt have to call them out again and pay the fee. Next day, there were more holes in clothes! Called and and they said they cant get a service guy out for at least a week! That was all during the Christmas and New Years holidays! January 9th, the service repair man came and said, Yep, its the same problem. We need to replace the tub and drum again. The part would be guaranteed to be in by Friday, January 13th!Guess what? Today I got a call, the parts were on back-order and it wont be until January 24th until they can become available. Seriously? Seriously?! I have a family of 6. Me, my wife, a 8 year old girl, a 7 year old girl, a 5 year old boy and an 18 month old girl. The piles upon piles of laundry are limitless waiting for empty promises.In the meantime, we have had to wash essential clothes (school clothes, socks, underwear, etc.) at laundromats, and friends and other family members houses. Whirlpool doesnt give a care about any of our problems. I come from a huge family, as does my wife. Together, we probably have 100 family members. I will crusade against Whirlpool for any and all appliances if this matter is not fixed and their customer service is not better!

This washer is going back. It simply will not spin the water out of the clothes. It says it gets clothes drier than a conventional washer, but I have not found that to be true. I have to use the drain/spin cycle over and over and still the clothes are wet. I had the repair crew out and they were able to get it to spin out a very small load consisting of two sheets and two towels. Other than that, it does not spin out water. It is also very difficult to load if you attempt to leave the center open as they recommend. The cycles are very long. Not being able to look inside without pausing it and waiting for it to unlock is also a huge hassle. I am getting one with a glass top so I can see what is going on. If you leave it open for too long, it cancels the cycle and drains all the water, and you have to start over which is another problem because all your detergent just got drained out before the load gets going. It uses so little water on most of the cycles that the clothes get totally tangled up with one another. I think you should be able to choose the water level manually. I am all for saving water but if I want more water from time to time, this does not allow you to do that. I DO NOT RECOMMEND!

I purchased my Whirlpool Cabrio Washer (WWT5640xw0) at Lowes in East Orlando in 2009. It has worked without issue (other than a slight odor) from then until today, 5-1-12. It has now refused to agitate or spin any clothing, it emits a slight burning smell from the basket, and the basket, when it does decide to spin, spins about as fast as a merry-go-round, banging into the sides of the washer (causing the metal on the sides to bulge out every time it strikes them). It is self-destructing.I called Whirlpool, and they simply refused to address any questions, once I told them that I did not have an extended service plan and that my unit was older than 12 months. I informed them that I refused to pay for an ESP, because I refuse to pay additional monies in order for the product to perform as advertised. They were rude. I said bad words. The call ended.$600 was gone. And I now have to run out and buy another washer, and I can promise you it will not be a Whirlpool. I am a local law enforcement officer. I would love to speak with an attorney about this if a class action suit is pending. I am beyond pissed. My moms chartreuse-colored Maytag still works after almost 30 years of service to our family. It required a new drive belt at somewhere around year 17. The belt cost $45.The Whirlpool CS rep informed me in a surprisingly snarky fashion that it would probably cost over $360 for the total cost of repair and that the only way to know exactly how much is to schedule a service call. I was also told that I would be on the hook for $100 for the service call even if I declined the repair.

I purchased a Whirlpool Ref side by side 11-2013. I have had nothing but trouble. First the Ice maker leaked, was fixed. The door to the ref has had serviced 5 times. The tech after many times trying to fix hinge on door twice was told to order new door. This took 6-8 week to get. Came today 5-27-15 too but new door on. It is still not right, has big gap in the middle - still not level as should be. I have called Customer Service again today with no help. All they want you to do is spend more money on a contract. I THOUGHT WHIRLPOOL WAS SUPPOSED TO BE A GOOD PRODUCT......NOTTA....WILL NEVER BUY THIS PRODUCT AGAIN. SO IF YOU EVER BUY WHIRLPOOL PRODUCT BE SURE TO GET EXTENDED WARRANTY. YOU MIGHT NEED IT..........STILL NOT SATISFIED AND NO HELP IN SIGHT.

I purchased a lot of Whirlpool appliances -- washer/dryer, dishwasher, microwave, and now a Whirlpool stainless steel refrigerator. This was approximately the end of 2014. Not long after I purchased the refrigerator, the front started with small rust stains. I notified Whirlpool and all they said was call Scratch-b-gone in California. My refrigerator should have been under warranty. They offered no other help. I live-chatted this morning and they say the same thing -- call another company. You are now out of service. Im so very disappointed in Whirlpool and will definitely rethink purchasing another Whirlpool appliance. My other stainless steel appliances are not having a rust problem -- just the refrigerator. I havent tried the Scratch-b-gone yet because on their website they say that a lot of Whirlpool products have a coating on them. VERY, VERY unhappy with Whirlpool and their customer service...

The company I work for bought a new washing machine a couple of months ago to make it easier for those that do the laundry here. The washer was suppose to be this great washing machine which has turned out to be the biggest piece of trash on the property!! Every couple of loads you have to turn it off and hopefully the computer in this Whirlpool cabriolet will reset so you can wash a load of clothes. You have a 50/50 chance it will work. DO NOT PURCHASE THIS MACHINE. IT IS THE WORST WASHING MACHINE IVE EVER USED!!

My old 25 yr old Whirlpool died and was shopping for a new one. I saw the Cabrio and was really impressed by the features and large capacity interior. I can say that I thought my clothes were getting clean until I looked closely. I have never been so disappointed with this washer. I wish I had my old one back! Clothes arent clean, they are so twisted when I take them out and theres a horrible smell, like oil burning when it runs. The machine would fill up and when it would start to wash, it wouldnt, it would stop. And a loud humming noise was coming from the back.I shut it off and turned it back on and it wouldnt clear. I had to unplug it and plug it back in to clear it and start over. The bearings are gone now and I was going to have a repairman come and look at it, but now I wont bother! After reading everyones comments this Cabrio is a piece of junk and Im sorry I ever bought it! So now Ill be shopping for a new one tomorrow with an agitator!!! Im not impressed with the HE appliances!!! Ive owned this POS for not quite 6 yrs. Expensive to purchase and I will not recommend Whirlpool to anyone! Its sad that companies today make cheap products!! Built to last... ha!! Well never see those again!!

We purchased Model # WFG231LVQ from Appliance Connections. Its a 5 burner with oven. When my husband went to clean the stove door, the bottom handle fell off because the heat from the oven had melted it brittle. Weve had this stove less than 3 months. Then we see where the clips that hold the glass on the front door have melted. The plate that separates the burner from the oven has bowed and splintered the porcelain. And the oval griddle burner only puts out flames on one side. Whirlpool sends a repairman out. He states that they really make them cheap these days. Writes down the whole list of things wrong with it. Repairman calls us back and reports that Whirlpool only wants to replace the parts. Im afraid to use my oven. I want it replaced or my money back!

The washer (Cabrio WTW7800XWO) was less than 2 years old and we had a motor go out, so we paid a repairman to come out and repair the machine. The total cost was over $300. Now 2 months later, we get another code on the machine and Whirlpool says, We are sorry but there is nothing we can do, but if you would like to pay $219, we can get a repairman out there to check out the machine and repair it. Theyre also giving the machine an additional year warranty. Shortly after that, I noticed the lid was not staying up when I opened to put clothes in it to wash. So since I was wondering what was happening, I looked at the lid and to my surprise, the springs that hold the door up when open are built into the plastic lid cover that has a see-through glass on it. Right where the springs are located, it must be a stress point and the plastic lid has since cracked and is almost about to break off. I am now in the process of ordering another lid and Whirlpool offered to sell me a lid for $226 but I think I shall buy it from someone else as I dont want to put any more money into Whirlpools pockets. We paid over $1000 when we bought this machine. Now it is about 2.5 years old. I hope there is a class action lawsuit on Whirlpool as I will definitely join in if there is. This company needs to go out of business if they continue to sell machines like this that have so many problems especially when they are less than 2.5 years old. Goodbye Whirlpool. You have lost many more customers as I shall be letting everyone I know about all the problems and complaints about this machine.

Havent even had the Cabrio washer for three years & Ive hated it since day one!!! First, our clothes dont come out clean OR come out with white streaks (changed soap, still happened!). Washing bedding is a nightmare! They are sopping wet & I have to wring it out. Finally broke down today & the repairman quoted over $600 to fix (paid $800). Take this piece of junk away!!! It cost me less to replace than get fixed; way to help the environment!

I am so disappointed with this washer. I totally dread doing laundry. The following are the complaints: Every load comes out totally twisted and wrinkled!! The soap/fabric dispenser holds water after each load (I have to take paper towels and get the dispenser empty!!!). There is not enough water to properly clean the clothes. I have never noticed a reduction in my water bill and have had this piece of junk since 4-25-13. There is NO short cycle on this junk machine. There is an odor to my towels - like they are musty - after I dry them and use them. I use Tide HE detergent and clean the washer with Affresh (you shouldnt have to clean a washer). I should have taken the time to write a review much sooner, but decided today was the day after doing laundry. DO NOT BUY THIS WASHER.

My Whirpool refrigerator model # WRF990SLAM01 was 14 months old (2 months past the new product warranty) when we started having issues with multiple areas. The ice machine stopped making ice and started dripping from the dispenser and the freezer stopped freezing food. I called and was told to purchase an extended warranty which cost me $375.00. The service tech has been to my house 12 times over the last 9 months. They have replaced multiple parts and even started replacing parts a second time. I was instructed by the service tech to call and request a replacement fridge. Whirlpool customer service told me that it would have to be considered a lemon before they replaced the product. I was told that would require each component to be replaced 3 times. I would need to take off work 27 more times for the repairs!!! The service tech came out one more time and he said there was nothing else he could do. I called again to complain and even wrote to Whirlpool corporation (though they never called me back at my request). After much complaining, which I do not normally do, they have decided to replace the unit. BUT I have to pay and additional $476.29 for them to replace this unit!!! I feel like I was totally raked over the coals from this company. I will never buy another Whirlpool product again and I recommend you do not either.

My Whirlpool Cabrio WTW7800 was bought 1 and 1/2 years ago. The lid is glass with a plastic edge. The plastic part of the lid next to the glass and hinge is cracking causing the glass to stick up. It is cracked from the top of the lid toward the base if the lid were closed. The only way this could happen if it werent a manufacturer defect would be if someone were to get inside of the washer with the lid locked and try to push up to get out right at the hinges. I have noticed several other complaints of the same problem on this website with the same model. Clearly this is a manufacturer defect. I am on the phone with Whirlpool now.