I purchased my Cabrio washer and dryer 2 1/2 years ago, and for the past 6 months, I have dealt with it being unbalanced and I tried everything to get it balanced. When I researched the problems, I found so many other consumers are having the same problems and that Whirlpool will do nothing about it. I decided to start a petition on Change website to try to force Whirlpool to stand behind their product and correct the problem, offer us a refund or another product, or even fix the darn thing. It is tough economic times, and we spent money to have something that was energy-efficient as well as a product that is supposed to carry a good name. I am a single mother with three children, and I dont have a $1000.00 to throw away after 2 years. This is shameful that we, the consumers, have to deal with this. Please go to the Change website and sign my petition. The more signatures I get, the more leverage we have to deal with Whirlpool. Lets pull together and show Whirlpool we will not stand for them robbing us of a quality product. Thank you so very much.

Purchased Cabrio set last year. Worst set I have ever owned! Clothes do not come clean. Takes forever to wash. Must wash multiple times to get clothes clean, even on deep water settings. Does not spin water out of sheets and blankets. Dryer dries unevenly. Waiting on repairman because dryer will not come on.

This unit is without a doubt the best microwave I’ve owned. It is reliable, cooks to desired doneness. It defrosts and rewarms perfectly. For the price I do not believe that there is a better performer. Would highly recommend with no reservations.

I always appreciated Whirlpool’s quality, but this brand new stove in my brand new home is a disappointment. The top, back (control panel) gets extremely hot when the oven is in use. The burners are not as easy to regulate, and the broiler (which is under the stove, a negative for me) didn’t come with a broiler pan. That was an additional cost. I had service out in the first 60 days because the oven wasn’t heating properly.

I purchased a Whirlpool gas water heater for one of my properties that developed an issue outside of the warranty period. My initial CS complaint is with Whirlpools IVR system, which was far less than a desirable experience. After tricking the system, a CS agent answered promptly but was not able to address my concerns. I asked to speak to a supervisor and received a return call from Chris within minutes. I found Chris to be patient and understanding of my issues. Chris promptly assisted me with my issues and offered an equitable resolution. Chris is whats right with American companies and domestic customer support.

I bought a Whirlpool 3.4 Cu Ft. Top Load Washer, Model: WTW4800XQ on Sunday. Today is Tuesday morning, but the machine broke last night. It lasted for about 5 loads and they were not big loads, unbalanced, and yes I had the right amount of soap. Whirlpool is saying that I washed something that was not machine washable. However, that is simply not true. I washed the bathroom rugs (which have been washed many times before) and they are saying the pump is clogged. If I had a washing machine 48 hours ago, do I really have to pay a service repairman to fix it? I will never buy any Whirlpool product again.

I purchased the Whirlpool Cabrio (wtw6600sw2) about five years ago. Last year, the motherboard had to be replaced. This year, it started to have load balance issues on the spin cycle; in other words, it wont spin without sounding like its going to tear itself apart. It cost $75 to have someone look at it, and to fix it will cost almost $400, and whats next? I spent a lot of money for this machine, and Whirlpools answer was to offer me a discount to purchase a new Whirlpool. I called Whirlpool and my model does not have a recall, but models with same problems have been recalled. I will never buy a Whirlpool again!!!

I have owned a Whirlpool Cabrio HE WTW6400SW3 for two years and have had nothing but issues from the start. Control panel was replaced twice under warranty. Also the clothes (socks underwear) were under the tub blocking the drain. This is not covered under the warranty. I was told by the repairman that this is the usual issue. He told me they took the front loader design and just stood it up with no protection from garments and coins getting under the tub, through the under tub filter often and into the drain pump. You are kidding me? Almost $1000 for this washer and its so ill designed. I have read forums that this has been an ongoing issue for several years yet Whirlpool continues to build these. I dont vent to forums often but just now I finished removing the tub to remove 2 socks and 7 cents. Also, I had to remove the drain pump and found another 16 cents inside it. So far the pump has not been ruined but this time water is coming out from the machine so will probably be ordering another pump for it as well. The wife wants it out of the house tomorrow and not another cent spent on it. But it is only two years old. What do you do? If you are reading this because you are searching for a new washer do not purchase a Whirlpool! I have gotten nothing but grief and was put off by their customer service dept as well. I guess after fielding so many calls about the same thing they have been told to just put all the calls off as no big deal. I am sure Whirlpool is making a killing off the sales on this unit. The claims made during the sale convinced me. What a joke. Look around the internet and you will find hundreds if not thousands of the same issues.

The knobs on the Whirlpool gas stove model Super Capacity 465 AccuBake system are easily confusing and dangerous. If the knob is turned in the wrong direction when intending to turn the burner off, it turns to a very low setting which is although nice for simmering, it is very easy for it to be mistaken as the off position and leaves only the gas leaking if the smell is not noticed in time.

I bought a Whirlpool range. After 15 months, I hadnt even paid it off yet the oven stopped working properly and then again after two years. These ranges are junk. Dont buy Whirlpool! They dont stand by the product either.

We purchased our first front-loader washing machine (Whirlpool Duet WFW9250WW00) just over two years ago. Since we purchased it, it has torn clothes and we have replaced the drum baffles twice (this would be the third time, but we are throwing the washer out), the drum seals twice (another place clothes can get caught). I had adjusted my washing (maybe I overfilled the washer, maybe I was using the wrong spinning speed), but every so often clothing would come out with holes or torn. The drum baffles must come loose before they come out, and clothing can get caught underneath them (I think that is where the tears occur). It has happened at least once a month and I had spent a fair amount of time trying to figure out where the clothes got caught and torn. Many people complain about bad smells from the washers (which I never had - I like the Tide with Febreeze detergent and every so often clean it with bleach or Affresh), but never torn clothing. I would really like to use a front-loading washing machine, but we are going back to the top loader - we cannot afford the clothing tears. I have seen that many people replace baffles (not many speak of clothing tears) and maybe in the future this problem will be addressed. But in the meantime, I would stay away from Whirlpool front-end washers. (GE makes some nice top loaders - and in 40 years of washing clothes and only owning two other washers, I have always thought washers to be an appliance that would last 15 years or longer with very little maintenance or trouble). I believe that I really tried to make this washing machine work out, but it got to the point where my husband did not want to wash baseball uniforms and other irreplaceable clothing in our washer.

I have had this Whirpool Cabrio washer now for one year. Clothes always come out wrinkled (even after drying). It leaves clothes unclean and leaves white streaks in clothes. Water level is so low in, that it cannot rinse or wash clothes properly. After washing towels, when removed to put in the dryer, soap is left in towels. I have had a repairman here, he says the design is bad, yet reports works as designed. Dont buy this washer. This is a piece of junk!

We purchased our front loading washer and dryer set to replace our set that was 17 years old and what a difference! I love all the different settings so I can customize the wash or dry cycles, including the energy-saving features. Although we dont have children in the home anymore, the large capacity is perfect for handling my fabrics and quilts. Something that didnt always work with my top loading washer. Of course, the fact that the front loading washer uses very little detergent is also a bonus.

We purchased a Whirlpool gas range for $600 in Aug 2015.. On May 2015 the range had an internal board failure (F2E0) and the panel does not control the oven or other features. We found out the part ranged from $350-$400!! Plus service installation! The one year warranty of course ran out but I think this is an outrage to sell an appliance that has such a poor electronic part. I have read a few similar complaints as this is also a Frigidaire model as well.

Oven was just about 3 years old when the oven bake feature failed the first of many times! Display says fault detected. Was able to get oven cleaning done and then it worked again but eventually has failed repeatedly since. Further reading and support from technicians has revealed its an oven control issue and replacement part is same cost as new oven! Apparently the oven control Whirlpool designed and installed cant handle heat!?? Very unreliable and would never buy their appliances again!

I purchased the Whirlpool Cabrio washer in 2011. It has been nothing but trouble since. I have had repair people out here several times, because the machine twists and tangles the clothes, doesnt get the clothes clean. Sometimes the clothes come out dry without even getting them wet. There are lots of soap scum too. I would NEVER buy another one of these. SO DISAPPOINTED.

I hope the CEO posts this on a giant screen in front of all their employees. The first thing I did after moving into our new home is brag about the American made Whirlpool appliances. Being from the Midwest I take pride in made in the USA product and go out of my way to support homegrown companies. I know that a number of the components in my fridge include the fan that failed after 11 month were most likely sourced and manufactured in China... but that no excuse!! Whirlpool needs to do a better job of QC. You need to be passionate and rigorous with your testing. Dont reduce cost at the cost of your customer base. It is amazing were to the point where we can no longer compete with China in quality.Second is customer service, if you know you cant compete in quality you need to be able to make up for that with customer support. I called Whirlpool and scheduled an appointment the day the fridge quit working. I was upset that it would take three days to have a working fridge but I was understanding. Lucky for me I had an understanding neighbor too. Anyways, when the day came for my scheduled warranty repair I was told that Whirlpool was mistaken and that I wouldnt be able to get it serviced for another week! This is just unacceptable.Right away I called the Whirlpool customer service representative and manager to express my frustration with this error. They were polite and both agreed with my frustration. It also sounded as if they also didnt understand why their own company was doing such a poor job addressing repair issues. They made it sound like this was a common problem of people getting overbook at repair service providers. Again another fumble. Bottom line, due to my position, I dont really have a choice but to wait another week for a repair. Take note: Every time you lose a customer like me this you lose 10! I will now go out of my way to tell people about my negative experience rather than my positive. So disappointed.

This dishwasher is disappointing. Very noisy. Water consuming, and does not clean dishes properly. In addition not much options with timing settings. There are just few setting options and each take long time.

Whirlpool Cabrio - 6 Big Problems: I dont write bad reviews on anything but in this case, I feel I have to warn potential buyers. Ive owned this washer for more than 4 years. Here are the problems: 1) This washer TEARS HOLES in my towels; 2) It SHREDS some clothes; 3) Loads are UNBALANCED every time I use it, regardless of load type or size; 4) Very LOUD when running. My neighbors can hear it and they are 150 feet behind us. It sounds like someone is pounding on the walls of my house. BOOM! BOOM! BOOM! I havent seen it, but I believe it might actually be jumping off the floor; 5) Its NOT High Capacity as advertised. Sure, the drum is big, but you cant put much more than a tiny load in it. If you try a larger load, the clothes dont get cleaned; and 6) Whirlpool wont do a darn thing about it. They dont care about the buyer or their own reputation.Our family grew and I thought we needed a larger washer. I foolishly replaced a ten-year old, $300 standard top-loading GE washer that never had a problem, with this expensive **. The GE had a drum that was about 1/2 the size and it washed MORE clothes! The GE never damaged any clothes and it wasnt ridiculously loud like this one. I regret ever buying this expensive washer and I will never again buy a Whirlpool product.

Had a part come off right after our purchase but was a easy fix to repair. The silverware basket also kept coming off until we looked at it and realized it was on wrong. This dishwasher is much quieter than our last one. It also shows fingerprints. We got this dishwasher in a group purchase during a sale at Lowe’s that included the refrigerator a stove, microwave and this dishwasher.

Purchased a Whirlpool WTW7800XW a year and a half ago. The left top of the washers glass pops up, making it impossible to use the washer unless I weigh it down. Apparently a screw has popped out to hold the glass in place. Whirlpool used to make a decent product, but thought I should pay them $129 for their time, just to come out and then an additional part fee. How about the 30 minutes I spent on the phone with no satisfaction. My time is also valuable. I gave them the choice to come out and replace the screw (which shouldnt have fallen out in the first place) or lose a customer. Fortunately, I have a husband that can repair it, but I am extremely disappointed that Whirlpool is now making substandard products. We are a family of 3, so its not like Im doing laundry daily. Am I wrong to think I can get at least 3 years out of a product?

We had purchased a Whirlpool Duet Sport Washer and Dryer in 2007. Since that time we have had several repairs on the dryer, resulting in us having to purchase an entire new unit in 2011 (4 years old), along with mold that has accumulated in the washing machine on the tub and rubber seal that cannot be removed after several attempts utilizing several products that were recommended. The end result is our laundry that has been washed - comes out with a musty odor. Not happy at all with the top of the line, best possible machine to produce clean laundry as was sold to us! This has been a nightmare, and a totally dysfunctional appliance that should have lasted longer than 5 years!

Refrigerator model LFFU17F5HWD - For 2 years it worked, but with problems - always frosting over. I called a service tech and they said it was a common problem, but to find a service tech to come and look at it. The cost for that was $250.00 and still no fix. Now it quit working completely. I was always told by my dad that Whirlpool was the best - maybe true, 30 years ago. I know one thing if I have to buy another refrigerator - it wont be a Whirlpool. You do stand up to your name Whirlpool of trouble. If anyone reads this, please take my advice and do not buy a Whirlpool. I have a washer and dryer thats Whirlpool too. They work but I wont have anything in my house that says Whirlpool on it. Its too bad that they were a great product at one time. Consumer Reports should do something about this company or the BBB. Im so mad I cant even spell well. Thats my 2 cents on Whirlpool of crap.

I purchased a Whirlpool Duet HE front end loading washing machine. Less than two years after purchase, the machines tub and bearings failed amounting to a repair bill of $1035.00. Fortunately for me, or so I thought, I purchased an extended warranty for the machine. However, even though the complaint department was aware of the failure, the amount of the repair and the fact that I declined repair and was opting for the $500 reimbursement option, I was told that the claim, as it was called, would take 2-3 business days to process and if I was awarded (his words) the reimbursement, I could only use this money on a new machine at a Sears store and not on any new, but previous year model, or at a Sears outlet. None of these things were related to me when they took my $214.00 for the warranty. In all, my original washing machine of 22 months will have cost me $1414.00. My new washing machine, if awarded one, will cost approximately $400. The total cost to wash clothes for 10 months will exceed $1,800.00. Do not purchase Whirlpool front end loaders because the drum bearings will break (that is why they exclude them from extended warranties) and do not buy extended warranties as Sears makes out in the end.

I purchased the Whirlpool Duet washing machine October 2010. When I first got the washing machine, it shook the house (new stick built house) when it was on the spin cycle. They had a repair man come out to tell me that there was nothing wrong with it, it was fine as it was. We thought it was ridiculous, but we are young and didnt know better. He also told us we should fill up the washing machine more than what we where because the clothes wash better when its packed. Big mistake on our behalf! The washing machine has ate thousands of dollars worth of clothing. We did what we where told, so we thought we were doing something wrong. Little did we know we were doing nothing wrong. It was the machine. Then a sock found its way to the drainage field which let water pour out of the washing machine throughout the laundry room and going to the rest of the house. What a mess. We called and they found the problem and removed the sock. Still didnt fix the damaged clothing issue. I called them 1 year and 7 days after we got it and Whirlpool still wont cover their product. They said they where sorry they couldnt help. Well couldnt and wont are two separate things. Its a shame they wont stand behind their product after I bought over $6,000 appliances from them. You think theyd be a little more compassionate to their customers after spending that much money? Now you know how they treat their customers. Dont buy Whirlpool. They (Whirlpool, Maytag, etc. ) are maybe cheaper than their competitors, but its probably worth the extra money if you know theyll stand behind their product. Very unhappy customer!

I have the 4.3 cu. ft. washer. This washer worked OK, but the lid lock does fail after about one year if the washer is in an environment where moisture may be present.I noticed the lid lock not working all the time about two months before the warranty expired. If this happens, call the warranty department immediately. After checking the ground wire and resetting the washer power over and over again, the lid lock finally stopped working completely. Here is how to fix it:There are two screws on the back of the top portion of the washer. Unscrew them from the silver straps. The washer lid will now push forward and up and off. Prop it up with a stick.Unscrew the two screws on the lid lock and start taking it apart (after reading this entire review). Be careful not to lose any parts and be sure to know where everything goes for re-assembly. Take pictures if necessary. Take the lid lock completely apart including any small pieces.The plastic slide needs to be cleaned. It has a spring that may fall when you pull it apart.The metal contact points inside the lid lock mechanism need to be cleaned. Be extremely careful when pulling the red cover off of the housing assembly. Pull the four metal contact points completely out of the plastic assembly. Be real careful with the black plastic slide piece, the metal rocker switch and the switch actuating motor. Use a small file and rubbing alcohol to clean off any green or white corrosion. Make sure to check all contact points.Re-assemble and you will immediately notice the lock switch working better. Re-install onto the machine. Re-install the upper portion of the washer. Start your laundry. Repeat after one year or when the lid lock becomes faulty again. These points should have been made out of a less corrosive material. Poor craftsmanship. Would not recommend.

I am very happy with this dishwasher. It is not a high end, rather middle of the road, but is very quiet, does a great job of cleaning my dishes and pots and pans.

We bought a complete set of Whirlpool Appliances three years ago. The set we bought were in the upper price range. In the past three years: The freezer began forming ice on the bottom which melted and poured water all over the floor (a unit on the freezer had to be replaced 18 months ago). An element on the stove quit working and had to be replaced (12 months ago). The ice maker quit working and had to be completely replaced (9 months ago). The dishwasher quit working and the entire motor had to be replaced (3 months ago). The ice maker quit working again four days ago. The repair person who just came said the entire unit needed to be replaced, AGAIN. He said the warranty on the part is only 6 months. I called Whirlpool itself - their warranty is only 1 year. The fact that their warranties are so short, and there are so many problems with their products is evidence that they do not make products to actually work. They simply make them to sell. They do not care if the product works once the consumer has paid for it. This was obvious in my conversation with the Whirlpool service person. She took 10 minutes to gather all my personal information then took 10 seconds to tell me there was nothing they would do.

Ive had my Whirlpool water heater for almost 4 years now and for the last year and a half, I had to have the pilot light lit at least 5 times. I finally got so frustrated around the 3 times and called the company. They gave me instructions on how to light it and to ensure no draft was around the tank. A couple of weeks ago, it went out again and I called. This time I was told to replace the thermocouple. I did that and guess what? Still no hot water. Im a single parent with 2 kids and weve been boiling water just to bath.A service tech came out and told me I need to replace the tank altogether. I called Whirlpool service and they told me it was nothing they can do. Like many of you, I got this tank from Lowes and they will not do anything about it either. Its hurtful and stressful that doing a holiday season, I have to decide to either buy a hot water tank or give my kids a good Christmas. I know several friends and family who has had their tanks a lot longer with no problem. My problem is its a crappy Whirlpool brand with poor customer service.

Purchased above refrigerator (WRF736SDAM13) over a year ago and it has been nothing but trouble. Ive had service companies out 6 different times. The doors never lined up or closed properly from day one. The final and last attempt to fix was putting caulk in the seal of the doors!! Left door does not seal properly and moisture builds up on inside. I requested several times for a new one and Whirlpool refused. Also purchased microwave, stove and dishwasher. Microwave went out 6 months after using it. They had to replace a major part. At least they did this at no charge. Just the hassle of having to be home 2 times to meet service tech. WILL NEVER purchase Whirlpool appliances again. Ive been using them for in all my homes in the past. STAY AWAY from this model.

Horrendous product! Purchased December 3, 2014 – had service technician from Whirlpool check the unit for excessive noise 3 months later. Technician said it’s the way it is designed – ice maker in door, air has to be forced up from freezer so it makes a lot of noise! Now, 15 months later, the refrigerator has totally quit. We are waiting for technician from Whirlpool. Obviously, no extended warranty so Whirlpool said they would extend the warranty and cover this visit for $357! How nice of them since they are sure the parts will exceed that amount!!! What a piece of trash – guess the refrigerator is only meant to work about a year! NO MORE WHIRLPOOL! I am thinking about standing outside of Home Depot to warn any customers who are looking for a refrigerator not to buy Whirlpool!Updated 3/23/2016 - To add to our previous review, the service company, AIG finally after 3 days has approved the parts required to fix our with less refrigerator (15 months old.) It will take 8-10 business days for the parts to appear! We have no refrigerator for at least two weeks! Great service from Home Depot and AIG!

Thank God for this website and Frank of Dover (postings on Feb. 11, 2013 and Jan. 7, 2011). We just had exactly the same horrid experience with the lid on our Whirlpool Cabrio Washer WTW7800XW. Just as with Frank, our home warranty provider first accused us of abusing the machine. I merely printed out Franks comments and description, whereupon the home warranty provider reluctantly agreed to replace the lid. We also bought an extra lid and are keeping it in our attic for the next failure. Do not purchase this washer!

I purchased a Whirlpool microwave oven from American Furniture/TV in Fenton, Missouri on 11-13-2010. It had a Whirlpool 1 year warranty and a Performance Guarantee for five years. I noticed recently that the plastic on the door had hairline cracks near the handle and now is beginning to crack around the glass on the front door. I called American when I noticed the cracks by the handle and was told that it was cosmetic and not covered. Now the cracks around the glass may be a bigger problem if they let fumes out from the microwave. I am waiting for a second answer from American. I feel like the problem is with the plastic itself.

I purchased a Whirlpool Duet front-loading washing machine on September 27, 2010. By October of 2011, it was making a loud grinding noise during any spin cycle. I called for service and was told I needed new bearings which entailed rebuilding the machine. I had purchased a 5-year extended warranty. I was originally told by the warranty company they would replace the machine.After waiting two months, and after several contacts made by me to the retailers customer service, I was told the machine would not be replaced, but repaired. After the repair, on January 6, 2012, the machine now rattles and shakes so much during the final spin cycles. It is literally impossible to have a conversation with someone standing next to you in the same vicinity as the washer, it is that loud. I am sorely disappointed with the Whirlpool line of products and with the retailer who has been dragging their feet on customer satisfaction.

Its a 25 side by side and though its a large refrigerator it seems small inside. That being said I would probably not buy a side by side again. I have always bought Whirlpool made appliances and have been always satisfied. I do not like refrigerators with the freezers on top.

Since May 3, 2016, five servicemen have failed to repair my Whirlpool refrigerator (WRF560SEYM), which is less than 2 yrs old. One trainee from A&E Factory Service had the nerve to reinstall broken parts. I have been completely without refrigeration for the past 48 hrs only to learn that the repairman scheduled for tomorrow has been cancelled because AIG warranty has not approved his visit. Further investigation reveals that the parts were never ordered, pending approval from AIG. Whirlpool cant help me because AIG has not declared the appliance unfixable. Hhgregg cannot help. I have spent countless hours on the phone on hold & wasted hundreds of dollars on spoiled food. Dont trust Whirlpool. Theyre not the company they once were. Their warranties arent worth the paper theyre printed on. Buyer beware!

I am having the very same problem with my french door stainless steel Whirlpool gold refrigerator. Water pooling in the bottom of freezer, freezing into a solid sheet and then leaking onto the floor. It is less than 2 years old. Apparently, this is a significant defect in this problem seeing how so many people are having the same problem with the same fridge. Has anyone reported to BBB? Im thinking class action lawsuit. Im getting ready to have to repair my kitchen floors as a result of this defect. I will be talking to my brother-in-law attorney about this and will post his response/recommendation. Whirlpool should stand behind their product and make this right.

It was time to put the old Frigidaire Washer out to pasture. I researched for quite some time online to find just the right new one. Its all so confusing as they all claim to be the best. The Whirlpool WTW500DW Top Load is the one I chose to look at along with 2 comparable others. I have had Whirlpool appliances in the past and was always happy with them, so I will be honest, I was leaning towards Whirlpool. I purchased the WTW500DW and matching Dryer after looking at the 2 others first. Price was lower, features were more to my liking and better quality/sturdiness was very apparent to me. This was the lower priced machine out of the 3 but had everything I wanted and a little more. The HUGE wash basket is wonderful. I have literally cut our laundry down from 4-5 loads a week to 2! Our clothes have truly never been cleaner.I am amazed at the great job this machine does with a minimum amount of time and water. It is quiet, efficient and the cycles do what they are supposed to do. The absence of electronic pad buttons is greatly appreciated. Its standard dials are easy to read and set. In my opinion, Whirlpool has done it again. Its a great Washing Machine at a price that is lower than others without as many nice features, it is well built and does the job perfectly.

Found after care service as bad as oven performance. Phoned for advice and told need to get used to new oven. My advice would be do not buy whirlpool ovens.

My new refrigerator was purchased in December 2016. The black finish was scratched by the installers wiping off their hand prints. The retailer offered to replace the doors which happened two months later. The black finish scratched IMMEDIATELY while cleaning of the installers fingerprints, using a silk microfiber towel though it looks like the cleaning was done with steel wool pads. I called Whirlpool and the retailer. Whirlpool says to order more replacement doors. Ha! Ha! I have had black appliances since 2000 in another home and there was NEVER a problem cleaning them. I do not recommend WHIRLPOOL because of this problem with the stability of the black finish. I dont have a receipt or order number because the suite of appliances was purchased by the condo association, not me personally. But I can attest to the condition of the marred finish and the ludicrous solution provided by WHIRLPOOL customer service... order more doors. I guess youd have to do that every week after you clean the front of the refrigerator.

The built-in microwave above the stove was in the home when we bought it seven years ago, so not sure how old it is. Although it had a crack in the door, near the handle, weve had not one problem with the unit. The crack has not opened more, or gotten longer, in the seven years weve been in the home. The unit is easy to clean, and has worked perfectly. It is simple to use, although no directions came with it, it was easy to figure it out.

In 2008, I purchased the 40-gal. Whirlpool electric water heater to replace the original unit in my home that had lasted 14 years without issue until it died of old age. After about 2 1/5 years, it died and I was given authorization to return it to Lowes at my insistence. Now after another 2 1/5 years, this one has died. So far, I have replaced both elements, lost a days work, missed out on a date because I could not take a shower and now Im told I have to replace the electrical box on top which wont get here until Monday. Its Saturday and I havent been able to take a shower in my home for 5 days now.The first CSR (Crystal) I spoke with implied that since I had 2 consecutive failures, this was a site problem, not a product problem. Theres nothing special about my site, and my old unit made it 14 years with zero repairs. I would argue that since both of the units only lasted 2 1/5 years, that the product is substandard. I asked to speak to a manager but was told no because they were all busy (no doubt) and her demeanor was unapologetic and unsympathetic. The second CSR (Nick) I spoke with was very nice and at least sympathetic. That goes a long way in customer service, but I was still not allowed to speak with a manager.I am going to try and repair it one more time, but I have zero confidence in Whirlpool and would never buy another Whirlpool product of any sort again. If I get it working, and after all Ive read here I doubt that I will, I will only be using it for the time it takes to get a replacement of another brand. This was my first experience with a Whirlpool product and you can be sure it will absolutely be my last.

I bought Whirlpool Dishwasher from Lowes. This is just 2 years old. Model number is WDTA50SAHZ. This is gently used Dishwasher. Suddenly it stopped working. After water fill up, dishwaher is not working. I thought whirlpool is superb brand. Now its waste brand. Do not buy whirlpool dishwasher.

We bought a house almost 10 years ago and it included a Maytag washer and dryer. About 5 years ago, we decided to buy the Whirlpool front loaders. What a mistake as the washer shook every time it ran. After several warranty service calls and days of vacation waiting for the service, they finally said they couldnt do anything. During that time I had been in contact with Whirlpool and asked for them to take them back. Of course they wouldnt. I asked for a swap for top load washer and they would need to also replace the dryer to match: still no deal. It took a letter from a lawyer to make it happen. They also bought back the washer and dryer stands which covered the lawyers costs.So shortly after I received the Cabrio washer and matching dryer, the lid is very heavy which I believe the lid spring broke. I refused to call the service company as I did not want to go thru that crap again. I also know I can fix it myself easier and without all the drama. I keep waiting for another failure but so far all is acceptable. Whirlpool is not the same company as they were when I made my living doing warranty service for Whirlpool! 30 years ago they were the best in the industry.The Maytag pair was giving to our relative and they are still working flawlessly. Unfortunately Whirlpool now owns Maytag. This experience has cost Whirlpool replacing our kitchen appliances. As much as I want to buy American, I will go with Bosch or LG only.

Purchased front load washer & dryer 2009 - have had issues with the washer ever since. The last episode has taken 3 visits from repairman - they cant figure out what the problem is - wont finish a cycle (any of them) and locks up. Cant open the door without turning it off and then back on. But the load wont spin dry - leaves clothes wet. Already had the harness replaced a couple of years ago and now they replaced the flywheel (it was warped) thinking that was the problem. Nope. Still wont work & the repair company said they cant figure it out & neither can Whirlpool. Im very angry after reading all of these posts about Whirlpool. Not a happy customer. But what can you do???

Whirlpool makes a beautiful product that does not last. I bought model WRX988SIBM in April 2015. Two years later the compressor is bad and no warranty coverage. Do not buy this model. It does not carry the Whirlpool 2-5 year sealed refrigeration warranty. Its amazing that an appliance that retails over $3K only comes with a 1 year sealed refrigeration warranty when Whirlpool offers it on other models. Be sure you know what your warranty coverage is before you buy any Whirlpool product.

I dont take pleasure in writing this review and to the readers, please know that this is the truth without bias. Before you buy from Whirlpool or purchase their extended warranty, you should know: I am writing this review based on my personal experience. I purchased the extended warranty in 2017 (approximate) for three years. In 11/2018, our Whirlpool dishwasher, model wdt920sadm2, which was purchased with our new home in 06/2016, began having issues and was not drying the dishes properly. I called Whirlpool warranty and requested service.Approximately 10 days later, a repairman from Convenience Appliances Service Inc. (repair tech) came and fixed that problem (wasnt drying). My wife turned on the dishwasher the very same day and we came back and the floor was flooded with water. We believe this was contributed to the initial repair and has never happened prior to that. Fast forward, approximately 5 service calls or more later (not embellishing), the dishwasher is still not repaired and the technician can’t figure out where the leak is coming from. On 02/25/2019, I received a phone call from Ms. **, Whirlpool/AIG care team (AIG is the underwriter) and was offered $540.75 and I would be required to complete a “proof of destruction affirmation” form.I accepted the offer and received an email the same day stating: Thank you for contacting Whirlpool Extended Service Plans Consumer Care Team. Per our conversation, I have attached the affirmation of destruction for your dishwasher. Please verify the information, sign, and return to us. Once we receive the affirmation of destruction back, we will start to process your prepaid debit card. That card takes 10 to 15 business days to process and will arrive to you by FedEx. If you have further questions or concerns regarding your Whirlpool appliances, please contact us directly by calling toll-free (866) 931-7390 to reach a representative for immediate addressing of these issues between 7 a.m. to 10 p.m. ET daily, or by emailing AIGservice@whirlpool.com whenever the need arises. Sincerely, Mable. U.S. AIG CARE TEAM.That same day, I received an emailed the affirmation of destruction form back to Whirlpool on 02/25/2019. I was impressed at the time that they reviewed the repair case history and made this fair offer. My wife and I began to look for a new dishwasher and canceled the future service appointment with Convenience Appliance Services because of the offer and acceptance. On 03/01/2019, I received a call from Convenience Appliance stating that Whirlpool contacted them and they are taking back their offer because their employee (Whirlpool) didn’t follow the terms of the contract. I called Whirlpool/AIG care team and spoke to ByonBera who stated that she was sorry to hear this complaint and would forward this to her manager for resolution. On 03/04/2019, I received an additional call from the Convenience Appliance Services Inc. and they stated that Whirlpool representative was not very nice to them and that they still wanted them to come out again to my residence on 03/11/2019. On 03/04/2019, I called Whirlpool/AIG care team again, and spoke to Tandy, who again apologized and read their company script and that they are sorry but still reneged on their offer. She then transferred me to John, who again read through his script/terms of the policy. I explained in detail that Whirlpool contacted (as per their email) me directly and they made the deal. I never called and asked. I completed the affirmation of destruction as requested and was promised $540.75 within 10 to 15 days by FedEx. John stated that he would have to kick this up to their resolution department above him to see if this can be rectified. John stated that this has never happened where the customer is involved (mistakes are normally caught before the customer is contacted) and that he could understand my complaint and frustrations. I received a call back from John on 03/04/2019 that Whirlpool will not keep their offer and that a repairman will go out as scheduled even though they made the offer without solicitation! Incredibly upsetting and disappointed!!! I have never experience anything even close to this from a major company like Whirlpool. It is evident that they don’t keep their word, that customer satisfaction doesn’t matter even if they are 100 percent wrong, and that their dealing are very deceitful! We since canceled our order for a new dishwasher and are now forced to wait for the next repair attempts again. If you get anything from this long-winded review, really think twice of making a Whirlpool purchase, or their extended warranty! Whirlpool really could care less of their customers and in addition, their warranty, in my opinion, is a scam. After this I, nor my family will ever purchase a Whirlpool brand appliance again. So please be careful and learn from my experience. Never again! Whirlpool should be ashamed of themselves.

Whirlpool Cabrio Elite Top Loading Washer Model WTW8240YW - I add my complaint to the roughly 2000 others about this machine and Whirlpool. Two months after the warranty expired the machine started making a loud noise on the spin cycle. I called a repairman and he said it was the main bearing going bad and this was a common problem with this model. He recommended buying a new washer rather than repairing the unit because the cost to repair was greater than what I paid for the washer. I called Whirlpool and all they offered was to send a repairman at my cost. This is terrible service for a documented problem that they have. I will buy a new washer but it will not be a Whirlpool!

I saw on the Today Show that my Whirlpool Duet washer, purchased in 2008 was a mold-producing nightmare. We are now part of a class action lawsuit that seeks redress. When I called Whirlpool Customer Service, I was fed the company line that the problem is that we dont clean the machine regularly. The instructions call for monthly maintenance, but the rep said we need to wipe it dry after each use. This is an original defect in the machine that Whirlpool refuses to own up to. We had been Whirlpool devotees for years but will never purchase another Whirlpool product.

I regret buying this washer. No complaint about the dryer but this washer has been the worst investment I have ever made. My clothes gets tangled up - seems like theyre not as clean as with my old washer which by the way I still have. I wanted a bigger set because I hated spending days off doing laundry but I spend as much time rewashing again and getting clothes untangled.

The French door fridge with the freezer drawers on the bottom are very flexible and easy to access. It goes downhill from there. The ice maker takes 4 days to fill up the bin with no use. The unit does not defrost and freezes up every six weeks requiring a manual defrost. Three mods have been made under the service contract and performance has not improved. PC boards have been replaced and at least one thermistor. My understanding is this is a single compressor unit with piping, relays and valves to port refrigerant to two different evaporators as needed. Unfortunately it simply does not properly balance/defrost and the freezer door freezes up. It certainly is not compatible with a high humidity environment. We will never buy another cooling design like this, but sure like the French Door layout. Glad we have a service contract.

I wrote down names, but I will not say them here. I found many recall sites on Whirlpool Cabrio WTW6200vwo for washer tub bearings. Which mine are bad. I called and logged my complaint but they say they have NO recall on any of their products and will send someone out but will charge me a service call unwarranted and parts if needed. I told them there are many websites that recall their tub bearings but they refused to fix the problem on recall. I dont have photos due to bearings are under the tub.

We bought the Whirlpool Gold series side-by-side about 2 years ago with an ice maker in the door and with this design, the ice bucket is on the inside of the door, which we thought was a very clever design, taking up less freezer space. Well, to remove the ice bucket, we had to use a blow dryer because even though you press the button which is supposed to disengage the bucket from the door, it has always been frozen onto the base.Then we started having issues of water leaking from the ice maker. It turns out, that the lever that controls the chute was broken. We called a certified Whirlpool technician to come out to fix the ice maker dispenser lever. Well as it turns out, it cannot be fixed. It is a sealed in the door unit and to fix it, we have to replace the door, a repair estimate for door and labor is approximately $800. That is absurd.I contacted Whirlpool and was told that my refrigerator is out of warranty and that there is not an option to repair the dispenser. There is nothing we can do. I said that according to the repairman, we are not the first to report this problem. When I contacted Whirlpool I was told there is no recall for this item. We purchased the Whirlpool based on the reputation that it has had in the past and the good product we have in a Maytag (which is associated with Whirlpool) dishwasher. Well, never again are we going to purchase a Whirlpool or any of its subsidiaries products. I have read so many unhappy customers here that I cannot believe that Whirlpool continues to make such inferior products or designs.

Here is my TERRIBLE experience: After only eight months it started to fail intermittently. Within weeks, it failed completely. I pay someone to come out and look. We get a part from Whirlpool. Pay extra to express ship it. 2 days later, pay to have it installed. Still doesnt work. Express ship another part. 2 days later, pay again to have it installed. STILL doesnt work. Express ship ANOTHER part. 3 days later - it STILL DOESNT WORK!!!!! Then they closed - wait another day. Now they authorize a complete replacement. Wait till Monday to PAY to have this one uninstalled. Haul it upstairs, into my car, back to Lowes, so I can get a new one. Haul it home. Pay AGAIN to have it installed.I was without hot water for 10 days and paid about 4 time the cost of the heater in labor to get through this MESS. I talked with Customer Service to get some help with how terribly unfair this was. Warranty Only Covers parts - should have bought the extra warranty... Silly me - I thought Whirlpool was a reputable and reliable brand. Boy was I WRONG!!! DO NOT PAY EXTRA FOR THE NAME - NOT WORTH IT!!!!!! I also dont recommend paying extra for the Energy Efficient. Its added electronics that just give it more to go wrong. Plain and simple is the lesson for the day!!! And after the hours of frustration with their customer service - Ill NEVER buy another Whirlpool product as long as I live!!!

We have had this range in our new home and in use since May, 2019. The first range had to be returned after its first use due to flaking of the interior walls; a problem the company acknowledged. Since then we have been so unhappy with its ability to maintain the oven temperature. Contrary to the instructions, we calibrated the oven temp and found that it would vary up to 20 degrees lower than the set temp. When set to 350, it would come up to that temp and then cut off until it fell to 330 when it would come back up to 350. That is a great differential noticeable in the time it takes to heat an item and which greatly affects baked goods. A similar lack of consistency in control in the range elements is apparent as well. Now those are major defects. Minor defects are: it is NOT a rapid preheat at all, both lights are on when the switch is engaged even though only one oven is in use, there is no clock function when the timer is in use and the range surface is difficult to clean as it streaks which is visible with the black finish.

My son purchased the Whirlpool 2 door w/ icemaker about 3 years ago. Twice weve had a repairman here. Yesterday was the 2nd one. He tried 3 ways to get liquid to go through a round coil I could see at the back. He said the problem was between the two back panels (back of fridge & inside wall) where there was a tubing to release the water from defrost cycle. It appears to be a manufacturing problem. I am very upset! It should be replaced at the very least.

I purchased a Whirlpool Cabrio Washer in May of 2009. I do laundry for only 3 adults, so I never run more than 3-4 loads a week. It constantly is off-balance when spinning and requires positioning the load again several times before it will continue its cycle. Now 5 to 8 minutes into it filling with water, it stops filling and beeps, and code F shows up on the screen. Also, during the spin cycles, it is very loud and fast. It sounds like it is about to take off anytime. I called customer service to no avail. They just wanted me to schedule a repairman to come out and fix it at my expense. Now, I know why they only give a one-year warranty - they know it will last one year but not much longer. Im from a generation of people that is used to appliances lasting 10 - 14 years and the company stood behind their products and didnt ask you to buy an expensive extended warranty for the 2nd year and so on. If inferior products were not manufactured, there would be no need for an extended warranty. Anyway, Im not going to put any money (I was quoted a $129 charge by Whirlpools service department just for the diagnosis of the problem which didnt include the labor or parts costs.) into a washer that will probably continue to have problems and become a money pit. Consequently, I will never buy nor recommend anyone buy Whirlpool appliances. It would get quite expensive buying a new washer every 3 years or buying the extended warranty plan. The matching dryer had no major problems, but a couple of years ago, I had to have the door changed from opening from right to left to opening from left to right because the door catch broke on the right side. Hopefully, nothing else will go wrong with it in the near future.

Bought this machine in July 2015 to replace LG front loader that went bad. This machine is the worst at rinsing the soap out of dark clothes, and probably the whites and lights too! Dark clothes always have white streaks and spots all over them. Called Customer Service and was told it was due to too much soap, the way the clothes were loaded, needed to add an extra rinse cycle to load, and/or because there is a water softener in the home. Have changed soaps 3x, changed the way I was loading the clothes, and I doubt the water softener has anything to do with this problem. I dont see how adding an extra cycle is efficient and seems wasteful. This machine is horrible and whether I just got a lemon or if its a defect in this machine, I dont know. Whirlpool doesnt seem to care either. I am going to attempt to sell this one and will not consider Whirlpool for the next one. Do not buy this machine!!

Love the bottom freezer & french doors. Unit uses way less energy than older fridge. Did need a new evaporator but it was covered by a recall. Happy so far. Love having icemaker in the door so it doesnt take up freezer space.

We bought our Duet washer in 2007 with a three-year warranty. In 2010, the washer started banging so we called it in for repair. It was determined that the bearing on the drum was bad, so the entire drum assembly was replaced because the poor design of integrating the bearing into the drum. Almost one year to the day, our washer started banging again. The washer is no longer under warranty. We were told the parts are around $400 plus and another $400 for labor.The repairman was from the store we bought the washer and he is a certified Whirlpool repairman. He related to us that this is a very common occurrence for Whirlpool washers because they are using cheap foreign made bearings. He services this problem on a weekly basis and Whirlpool will not do a recall because unless it is a safety hazard, it is not a concern to them if consumers have to pay out the nose for cheaply made parts. This repairman informed us that during training at a Whirlpool class, he learned that on the main board of the washers, they could put a 2 cent lamp that would indicate a bad board which would simplify diagnosis, expedite repair and reduce service time, but Whirlpool wont do it because it isnt cost effective. The repairman told us that we can call customer service until we are blue in the face, but Whirlpool wont give a ** because it is out of warranty. He sees this happen all the time with Whirlpool. My wife called Whirlpool Customer Service just to be told we are ** even though the cheap, crappy bearing that went bad was done under warranty, a year earlier.Well Whirlpool, I guess you lost another customer who will make sure that you lose a lot more customers. We are going to take our business elsewhere and we will make sure all our family, friends, neighbors and coworkers know how bad your customer service and poor attitude is toward consumers. If you cant back your products when you put cheap foreign garbage parts in your product, then you need to lose business and get out of the market.

I purchased a Whirlpool washing machine from PC Richards in Lake Grove 15 months ago. I paid $590.00. I had to call PC Richards back because it sounded like the machine was not spinning right. The servicemen came back and said nothing was wrong. It was supposed to sound like that. Now the machine stopped draining and spinning. I went to the store and they handed me customer service numbers and said they could not help me. I contacted Whirlpool online and received a phone call from a woman that gave me a lesson on how to load the machine and put soap in it! She was a very polite woman, but, gee, that didn’t solve my problem.After 4 days I was able to get through by phone and was told to call service. I contacted Mahler Appliance. He looked at it and said he couldn’t fix it and took a check for $81.47. He told me to call Whirlpool. I called Whirlpool again and got their service people. The gentleman came and could not figure out what was wrong. He tried a few things and said it was probably the main board. He said to call Whirlpool, but they most likely won’t give me back my money. He could charge me $460.00 for a new board per his supervisor. I just paid $590.00 for the machine and another $87.00 to some guy who took advantage. He left with an $87.00 check and I still have a broken washer. He did tighten up a loose wire he said he found and told me to try it and good luck. So I tried it. I put clothes in and turned it on.I came back about 20 minutes later to see if it continued to run and I slipped and fell on the ceramic floor because water drained out from somewhere and went all over my floor. I have injured my back and elbow from hitting the hard floor. I also have water all over the place and finally a very broken defective washer. I am angry. I hurt myself and have spent close to $1000.00 and I still have no working washer and no way to buy another one. The washer is 15 months old. That’s brand new to me. There was obviously a problem from the beginning. Whirlpool has always had a quality name for years. I would hope that they would stand by their product and fix my washer for me. It is obviously defective.

I am making my last payment on this junk ** washer and I cant wait to leave this one at the curb! Like the other reviewers...this machine leaves white deodorant on dark shirts, sheet sets either constantly off balance or parts of them still dry after wash cycle is finished! I changed detergents several times thinking that was the issue...but the bottom line is the sell of having no agitator and water saving features leave you with dirty clothes and off balance crazy shaking nonsense! DO NOT BUY THIS MACHINE!

After only 14 months of light use, the magnetron in my over-the-range Whirlpool stainless steel microwave failed. The cost to repair was $350. I paid $450 for the whole unit upon purchase. I wrote to Whirlpool with documentation and got a voicemail that they were sorry, but the 12-month warranty had expired. The independent repair person said it is the Korean manufacturer of the magnetron that is the problem. He is replacing units all over town on all kinds of models Whirlpool is involved with, including KitchenAid. Whirlpool needs to get their money back from Korea! I will never buy another Whirlpool product and have told them so.

We purchased our oven on 12/06/15. I have called and complained about the AquaLift oven on more than one occasion. This technology does not work. I would have thought that there would have FINALLY been a recall on this oven. I am a senior who thought this stove would last me for the rest of my life. I have to stand on my head to try to clean it. NEVER, NEVER, NEVER would I have purchased this if I had read any of the reviews. Buyer beware!!!

Whirlpool over stove microwave/convection oven model GH7208XRY-4 - I purchased this top of the line unit in April 2012 for a vacation home kitchen remodel. It wasnt installed until June 2012 and stopped working in May, 2013 just after the warranty period expired. The problem was with the touch screen panel that went blank and the fan/light control switches also failed. This unit has only had light use since my wife and I are retired and use it primarily for heating tea/coffee. I contacted Whirlpool customer service and they graciously offered to cover the cost of replacement parts but I had to pay a service charge of $125. The factory technician said the whole door needed to be replaced since the electronics were not readily accessible so it took about a week to get the replacement door which turned out to be the wrong one and needed to be reordered. The technician finally replaced the door and the faulty fan/light switch. Within a month the fan/light switch failed again but was still under warranty so it was replaced for free. A little more than a year after the last service the touch screen control panel began operating by itself changing screens and beeping randomly. This was somewhat disconcerting but the unit continued to work pretty normally until my wife placed a small plate of leftovers in oven to be reheated for 1 minute. She walked away to do other things and forgot about the food in the oven until we noticed a strong burning odor and found that the microwave was still running some 20 minutes later and had turned the food into a black mass of burned food and the plastic cover was melted and burned.I contacted Whirlpool service thinking that the unit was under warranty from the previous service but they said the parts only carried a 90 day warranty and my only recourse was to pay for another service call and purchase another door panel for approximately $400 or I could buy an extended service contract for $300. Needless to say Im not about to spend that kind of money to, at best, get another year of service from this inferior product. This is simply not a safe product that could have started a deadly fire if I had not been present to stop it when I did. I have probably owned a dozen microwaves from other manufacturers and have never had any kind of problem including a comparable GE unit that has been flawless for over 15 years. I am extremely disappointed that Whirlpool has cheapened its product line to such an extent but I suppose I shouldnt be surprised since I noted this product was made in China.

It works extremely well. My wife and I have had it for several several years and no problems with it and it cleans the dishes very well. We really like the silverware holder. The right size for a family. Recommend it to anyone.

I had a perfectly good Kenmore range, but I didnt like the color. I purchased a Whirlpool 30-inch gas range at Lowes. I had problems immediately! The repairmen were at my house 6 times within the first year. My warranty expired and they wanted me to pay for an extended warranty. I refused to pay any more for this piece of junk! I fought with Whirlpool and demanded they either replace the range or reimburse me the full cost. They finally agreed, after many heated conversations, to replace or reimburse me as long as I promised not to purchase a Whirlpool product again. What kind of company would say that? A company that knows their product is defective and has poor customer service. I opted to take the new range that they promised wouldnt have the same problems. It is having the same issues as the original one. It shuts off in the middle of cooking and it is infuriating to say the least. I can promise Whirlpool I will never purchase a product from them ever again!

In 2008, we purchased a Whirlpool Gas Water Heater from Lowes. Three years later the tank started leaking (this water heater had a 6-year warranty). Per Whirlpools instructions we were to return this one to Lowes for a refund (in hindsight we should have taken the money & went elsewhere to purchase a better brand!). As our plumber was removing the leaking heater we went to Lowes to purchase a new Whirlpool Water Heater upgrading to one with a 12-year warranty hoping that this one would last, it was advertised as the BEST one Lowes sells! After our plumber swapped out the heaters we returned the leaking water heater for our refund (remember this one had a 6-year warranty & only lasted 3 years).This past June (2015) our water heater stopped working, turns out the thermocouple went out which shuts the gas valve off. Called 5 plumbing companies in the Metro Phoenix area, not a single one would work on it! We researched the repair, called Whirlpool & was told that this water heater was out of warranty. Wait a minute! This one has a 12-year warranty & it is only 4 years old! Whirlpool told me that it is a replacement water heater so the warranty for this water heater is only 6 years (from the 2008 date of the purchase of the first water heater). It didnt matter that the replacement water heater was a different model & was more expensive than what was refunded to us. We replaced the thermocouple ourselves & got it going again. Last week it started leaking, called Whirlpool again got the runaround again, called a plumber who replaced it with a new Ruud for $1000.00 (Water heater + Labor).We went back to Lowes to try to get their help resolving this, the store manager said this was a Whirlpool warranty issue. We ended up taking the junk Whirlpool water heater to a recycling facility and getting $2.50 for it. Bottom LINE!! READ THE REVIEWS, THEY ARE TRUE!!! There was a class action lawsuit with a settlement of which I never received a notice for, I read about it online this summer, but it was too late to opt in. Dont waste your money on Whirlpool water heaters, no one will repair them, Lowes wont stand behind the products on their shelves, they get your money & hide behind the manufacturer & Whirlpool has very nice script to get you off of phone! Whirlpool used to be a trusted brand (do your research, I think they are the manufacturer for certain store brands! ). Our new Ruud water heater has a faster recovery than either of the Whirlpools that weve had; the drain valve is brass, not plastic like the whirlpool, it is overall a much higher quality.

Need to arrange shelves for better storage!!! Ive not had any major problems with it so far!!! I need the rubber seals on the freezer and refrigerator door replaced!!! Other than that its alright!!! Im hoping it lasts for a long time!!!! On disability and be hard to replace!!!

This machine cannot handle washing jeans, towels, blankets, pillows or anything bulky or very small loads. The load becomes ul unbalanced almost every time I try to wash a load. It has never gotten things very clean.

I had a Whirlpool dishwasher for year and it worked great, but the baskets were rusting. I decided Feb 2014 to purchase another Whirlpool dishwasher. It did not clear as well as my old dishwasher. The seller of the dishwasher stated it was our water or detergent. The water and detergent were the same. The only difference was the dishwasher. Day prior to changing the dishwasher, the dishes were clear and the day I changed the dishwasher, the dishes were not clean. November 2016, the main board has gone out. The part costs $148, plus the service call. I called Whirlpool. They stated they would sell me the part or would discount a new dishwasher. I think they should discount the part!!! Whirlpool makes most brands of dishwashers, so you cant change companies. Their quality is all you can get.

Even with the hottest water on the most heavy duty setting, regular dinner plates are not cleaned. The flatware holders that are set in the door (instead of free-standing in a rack) do not have adequate holes in the holders and are too far away from the limited jets to get adequate soap and water to cleanse the flatware. Even after rinsing all scraps off the plates and flatware, we find bits of food, gravy, or smudges on the plates and flatware - since its first usage. The manufacturer had the audacity to claim that was normal. Settings include delayed starting, heavy duty versus normal washing, and different types of drying. The heavy duty washing is definitely poor quality, and there seems to be no difference between any of the drying settings. The delayed start is nice. The physical layout of the prongs on the racks and the folding racks do not allow easy fit for most sizes of pots plus plates on the same bottom rack. I cannot put a 1 gallon pot level on the same rack as dinner plates. I must put it beside salad plates. Only small sauce pans fit neatly or cleanly beside dinner plates. Yet the external dimensions of this dishwasher are the same as the competitors standard size. Looks neat and is easy to clean. Also, the exterior does not show scratches. Actually, I cannot see where the exterior has any scratches. The service people were very little help. The Warranty said that after five (5) service calls the unit would be replaced. We made six (6) service calls, but we were told that we did NOT have six because if you called again within 90 days of a call, that was considered the same service call. That requires 450 days minimum to have five (5) qualified service calls, but that warranty was good for only 365 days!

My old dishwasher washed much better than this one. For one thing, I do not think having the silverware basket in the door is a hindrance more than anything. For one thing, the silverware does not always get clean. Even some of the dishes do not get clean. I think the engineering of the dishwasher is poor. When you pull the bottom rack out to put more dirty dishes in, it gets caught on the silverware that are in the silverware basket in the door. Makes it very difficult to get the bottom rack out or in. I have no gripe on the size of the dishwasher. I would just like it to wash the dishes and silverware clean. The appearance of the dishwasher is good but that doesnt clean the dishes. I am more than satisfied with the appearance of it. I do like the buttons being at the top of the dishwasher so that a person cannot bump them when it is running. I just think the design of it could have been much better. My other dishwasher had the silverware basket inside on the bottom rack and I really liked that and if I ever buy another dishwasher, I would make sure that it is inside the dishwasher. I dont believe that Whirlpool is the company it used to be. I have an oven that has been nothing but a problem for me and it is a self-cleaning oven but I cant even use the self-cleaning feature because it blows something in it and it doesnt get hot and clean it. Have had it fixed twice and the company that sold it to us will not even talk to us about it. Im not sure that I would buy another Whirlpool appliance of any kind again.

Whirlpool Duet WFW94HEAW0 Washer - Bought the machine in Feb 2014 and was generally very pleased with it. However a few weeks ago we started getting oil/grease stains on clothing. Wasnt sure what was causing it but it has now got so bad that the machine cant be used. An internet search indicates it is possibly a ball racer ring and doesnt sound an uncommon issue. A call to Whirlpool resulted in a quote for circa $350 for a service call. Thats a 1/3rd of the original value (includes a 12 month warranty). And its just over a year old!!! We had a problem with the Maytag Neptune that ended in a class action suit and now this replacement machine seems to be even worse. I would recommend anyone to really consider what to buy and give this range a miss.

Replaced an old water heater with new Whirlpool 40 gal. short natural gas water heater N40561-403. Good instruction, very clear directions. Also purchased at Lowes was a Utilitech universal gas water heater installation kit. The nipples provided in the kit screwed very loosely into cold water inlet and hot water outlet. I used teflon tape and finished the installation. When I turned the water on both fittings leaked. I couldnt tighten the nipples any further so I shut the water off and drained the tank a bit and reinstalled the nipples with at least 8-9 wraps of teflon tape. Im not sure if that is normal or if nipples were under size or if the cold water inlet and hot water outlet were larger dia. than normal. FYI.

We purchased our Whirlpool Cabrio platinum washer about 3 years ago. I am completely frustrated with it. When it is on spin cycle, it sounds like a freight train going through my house. During the rest of the washing... it squeaks. And right now this is the 5th attempt to wash the same load of laundry. Because it keeps getting unlevel and it will not continue after I move the clothes around to get it level. So I have to start all over. There is not a spin cycle option that is available by itself. Every time I have to choose the rinse/drain/spin option. Obviously it is not under warranty anymore! Only a one year warranty... really pathetic! And when we called they offered us a little discount to buy another one. No thank you!!! Wont ever buy Whirlpool again.

Whirlpool claims this technology works to clean the oven; however after one month of use and one casserole spill, we attempted 3x to use this system and the cleaning process was a total failure. The gravy spill on the bottom and mild oil residue on the sides from roasted vegetables was the same as before the cleaning cycle was tried. The cleaning kit accessory from the company was a joke. It consisted of 2 sponges and a small scraper! We purchased the slide in model WEE745HOFS. Buyers of any and all Whirlpool products with Aqualift BEWARE... It does not work. We have since replaced the product with a range with the traditional cleaning process system that has worked for decades in most major brands.

I purchased a Whirlpool washer and dryer from Best Buy. I purchased one on sale that was a great value. The delivery and set-up went well. However, the model I have had a loud vibrate. The drum in the washing machine would wobble and shake across the floor. I finally had to return it and replaced with same model. I experienced the same issue after 30 days. I didnt take the insurance out and I regret that move.

Two-year old Whirlpool Cabrio top load washer; absolute piece of junk! Bearing on the drum howls like a train. Now the master board or some other sensor (under drum) is out. Serviced for the third time and the service repairman states its cheaper to replace than to repair. For a 2 person household, it is reasonable for us to expect more than 2 years from a washing machine. Same experience with Whirlpool 15 years ago. 1st time shame on you; second time shame on me.

IPod the Gold Series from Whirlpool appliances including the French door with the freezer on the bottom the induction still two ovens and glass top the microwave in the dishwasher does it cost me about $8,900 dubstep problem with it is after two-and-a-half years of using it the freezer stopped working and coming to find out that not only mine but three other ones in my account have the same problem. The sealed system for the freezer had a leak in it. I lost the freezer traffic to Whirlpool. First time around they said, No problem well take care of the part. To take care of Labor. I waited a month. Nothing happened. I called them back. They said I needed to do something else so I waited for it to happen. Nothing happened. Now I call back 8 weeks later without a refrigerator my house come to find out they told me theyre not doing nothing.Well four weeks later now Im sitting with the stove which cost me quite a bit of money like $2,000 for the induction stove. Now its burned out the computer components. Control panels are both out. It will cost $800 to repair it. Now well pull. Said they will also pay for parts for that but not for the labor so now Im stuck without a refrigerator and I dont have a stove in my house and theyre saying its okay that these very expensive piece of equipment that I bought and its okay for them to only last 2 years. Never had a Whirlpool last me less than 10. I think theres something wrong with this picture.

I have a Cabrio washing machine and the circuit board has gone bad. I understand from Whirlpools customer service that if your machine was made before 2005, they are fixing the issue. Mine was made after 2006. Even though the problem is the same, Whirlpool will not correct the problem. I was told it was fixed in the new machines. The circuit board goes bad and you have to start and stop the machine at least three times before it will start your cycle, then it stops again at the 17 minute mark and you have to cancel and start the machine again for it to finish its cycle. The error is F1. Customer service acknowledged that this is a known problem for the Whirlpool machines built before 2005 but deny any claim that is is happening to the machines after 2005. Looking at all the other complaints, it is still a problem. I am disappointed in Whirlpool for their customer service attitude and for them not standing behind their product and fixing a known problem. I have always bought Whirlpool products but going forward will be switching to a better company. Shame on you Whirlpool. For a machine I spent $1000 on, the part is going to cost $300 to fix.

We purchased a Whirlpool 5 top burner gas range in 2008. The oven stopped working. It would click 2-3 times, heat to 100 degrees then stop. Luckily, the range was still in the 1 year warranty. WP sent a tech out who eventually deemed it non-repairable. WP replaced the range. We were sent a letter offering an extended warranty plan May/June 2012. We took advantage considering our troubles with the first range. In October 2012, we noticed the oven started the same problem (2-3 clicks and would not ignite). In addition, the top burner clicks on its own to the point to having to unplug it. Since then, we have not plugged it back in for we feel it’s not safe! We have been working with WP Extended Service Plan (ESP). The obligor is the Federal Warranty Service Corp. for 2 months, ruining our Thanksgiving and now a few weeks till Christmas, our family is still without a range/oven. The ESP claims the damage is from chewed wiring from rodents. We live near fields that have just been cut; mice are coming into our home. However, when the tech came out, finally, he claims there are no chewed wires and the part he has to fix the oven is not worth putting in and will contact the ESP claims department to deem the range/oven non-repairable. This is the second range/oven - its doing the exact same problem as the first but ESP refuses to help us. The last supervisor would not do anything. We requested his ID# and he hung up on us. I contacted WP directly and waiting to if they can help.

Looked for the best refrig we could find and it turned out to be a piece of junk! Less than 3 years old, paid 2700$, french doors bottom door freezer. It started making a lot of noise it seem to be coming from freezer. Called Whirlpool, they said to clean coils. We wanted a repair company to come out. They set an appointment for next Tuesday between 12pm and 5pm. Said ok.Was making so much noise, and no longer freezing everything so call said company. Lady was very rude, and said they would not be out on Tuesday but sometime the following week. This would not work for us so called another repair shop, said they would be out. They were here before 6pm. Found out that they have been having this problem, had same type of call already this week. Repair for this problem would be over $1100.00. No thank you! Would just as soon junk this appliance. So very sorry we wasted our money on this.

I purchased a Whirlpool Cabrio washer model #wtw8200yw in August 2012. I just purchased a new washer today (Jan 2018) to replace it! We have had to replace the lid lock twice, then the cycle knob would only work on the normal cycle. Last week it started to sound like it was going to take off! Had a repairman come and the bearings went out in it, will cost almost $500 to fix! Not spending another dime on this junk! I purchased a new washer today (not a Whirlpool either!)

Our original dishwasher lasted many years and did a good job until it didnt. We replaced it with this one that we found at Home Depot. It is not the one we wanted but the delivery was months away and this one was in stock. It does a good job in cleaning the dishes. The only issue I have is that the top rack is not designed for large mugs or glasses. The wine glass holder has 3 slots, but we can only get two in based on the spacing. Also, our mugs dont fit, well on the other side, inside the fingers. Maybe our dishes are on the larger side...I dont think so but like I said earlier, it does a good job cleaning the dishes.

Stay away from all Whirlpool products. The appliances are terrible (broke twice for different reasons within 14 months of purchase). Customer service wait times are over 90 mins and the technicians take over 3 weeks to get to the house and they dont fix it, they order the part and that takes another 3 weeks for it to arrive and the technician comes back. We bought an extended warranty and when the fridge broke a second time, they canceled the warranty and said they had the right to cancel it as it was in the contract. Terrible, terrible company. I work in the service industry and I am in shock that this company can get away with treating customers like they have.

I purchased a 12 year warranty, high end Whirlpool WATER HEATER (OR SO I THOUGHT AT THE TIME) through Lowes in 2014. Model ND50T122-403. Six years and multiple service calls later it is broken again, this time for the final time. I am ripping this garbage out. So livid with this company that could give a rip about their customers. Three years in to my 12 year warranty it started giving me problems. Horrible HORRIBLE customer service. They will insult your intelligence. Whirlpool will not honor the warranty or stand behind their product. They just take your money and basically give a shrug of the shoulders or worse blame you for THEIR TERRIBLE product failing. It may be unscrupulous and unethical but I guess saves them a pile of money which is what they seem to only be out.The Service Tech that came for the 4th time to repair it says they see this all the time in Whirlpool water heaters. Its a Design Flaw they say. I dont know about all that. I just know when I have been swindled. The electronics are garbage. The pilot light when it goes out is not easily reset as others have mentioned on this site. Will stay lit for while and then shuts down. Whirlpool says, despite reams of evidence to the contrary it must be a safety issue in the install, which they have absolutely zero evidence of therefore, they are not honoring the warranty. They are Blaming the installers, according to our service techs who tried to order the part thats supposed to be under warranty.The original installers, by the way were from Lowes, the outfit that sold me this hot mess. Another Class action lawsuit seems ripe. Or perhaps the consumer protection division from each states Attorneys General would be interested in protecting their citizens from practices like this. Lowes is complicit in allowing it, failing to protect their customers and not calling Whirlpool out for it. I cant think of a more deserving target of consumer protection than Whirlpool. A truly horrible, expensive experience. See the Whirlpool logo and RUN - - DO NOT WALK -- THE OTHER WAY!

Bought a side-by-side with extended warranty model ED5VHEXVB01. I had a problem with the ice door. They came out, said they saw a bug, left no comments made, received no word from company. Finally, I called them to be informed on the bug problem. They canceled my warranty with no refund given. Now this will be the 3rd time I have to buy. The starter/overload relay fridge is only 4 years old (out of my pocket). I was told by a parts company this problem the company knows about and will not resolve. My advice is RUN, DONT WALK, away from ALL Whirlpool appliances.

Was very excited to have purchased Whirlpool stove with convection oven. The paperwork from Home Depot showed SELF CLEANING. Due to not feeling well from cancer I didnt realize it was AQUALIFT! A few years passed but I never used oven. Pandemic changed that. When I tried Aqualift. Did it 3 times in a row but nothing was clean. Called Whirlpool & they offered to send me a paste I could rub in & rinse off. THATS NOT SELF CLEANING. ITS MYSELF CLEANING plus cancer in abdomen so difficult for me to do. Class action suit is being filed again but not sure if it will be for 1 state. Many complaints on Whirlpool & other companies using aqualift.

Quiet running, does a great job cleaning and drying the dishes, experienced some cloudiness on the glassware but found that if I position them in the middle of the upper rack that issue was solved.

I have a 3 1/2 year old 9400WFW WP washer with a 70 error code. After viewing complaints on various websites, it appears this is a large scale problem with Whirlpool Duet owners. I just got off the phone with WP customer service and explained how many complaints are out there for F70 code error, yet they do not have a recall on this part!How can this be justified? This is a non-mechanical part of the washing machine. The life expectancy should be more than 3 years.My washer is not overused as there are only 2 people in the household. I do not want to pay the cost to repair this. I think WP should issue a part recall on this model. Does anyone know how to find out how many replacement CCU or CPUs have been purchased in relation to the number of 9400 WFW sold or if there may be a chance that WP needs to reconsider a recall?

Whirlpool Cabrio TLWasher purchased 2011. Doesnt drain, no spin, inconsistent cycling, poor washing action....wont even attempt to repair, in light of reading product reviews and consumer experiences with this washing machine- $600 junk.

Whirlpool cabrio washing machine is 3 years old and the bottom leaks heavy bearing oil everywhere. I now see it is a common complaint and the seal was incorrectly installed by the manufacturing plant. They should be forced to offer a recall and they should stand behind their product. I will never buy whirlpool again. I see thousands of complaints online.

My family purchased a Whirlpool Cabrio washing machine approximately 4 years ago. The first two years were fine. I had no issues out of the machine at all. The last two years (just as my warranty expired) have been terrible. It was serviced twice just before the warranty was up and my husband has serviced it twice since. On two separate occasions, the bearings have worn-out and the bottom seal leaks water all over my floors. I would never recommend one of these machines to anyone!

My gas range doesnt work all that well. Sometimes the flame catches and lights, sometimes it doesnt. Oven seems to be less than steady in cooking. It is ok, but I wouldnt buy again.

I purchased a Whirlpool Water Heater BFG1J5040T3NOV from Lowe’s and have had numerous problems. The biggest issue is having to replace the thermocouple three times. It works fine for about a year then I need to replace it again. This is tiresome and wasteful and Whirlpool should be ashamed. As a company that once had a high reputation, this is sad. I would not recommend buying anything from them, especially their water heaters. After repairing this one, again, I will look elsewhere for the next one.

Im very satisfied with the looks and performance of my Whirlpool dishwasher, it is quiet enough that I put it on to wash before going to bed. It is that quiet. Im not happy about the way it was installed, but that is no fault of the dishwasher or Whirlpool, it works great even though it sits kind of crooked in the cabinet. The dishes are always sparkling clean and dry when it is done washing.

I bought Whirlpool top-loading high-efficiency low-water washer Sept 2018, model WTW5000DW, Serial # C83444466. Worst washing machine ever! No matter which water level you choose, it will not dispense enough water to cover the top of the clothes load, therefore the clothes are just moved from side to side with only the bottom layer of clothes getting wet; top clothes stay dry. Not enough water to fully agitate to clean the clothes!Whirlpool serviceman came today (Jan 13, 2020) to recalibrate the settings. VERY NICE MAN BUT THERE WAS NOTHING HE COULD DO TO SOLVE THE LOW WATER LEVEL. Recalibrating settings did nothing to solve the problem of not enough water. I am 81 years old and I have to manually add at least 4 buckets of water to an average load of clothes. This is unacceptable. Wont someone please initiate a class action lawsuit against Whirlpool for selling this very obvious poorly designed machine? NEVER EVER BUY A WHIRLPOOL WASHING MACHINE. It is a waste of money.

I bought this appliance 9 months ago and it has broke 4 times now for the exact same reason. I have set aside 6 separate 4 hour windows for Diamond Factory service to come repair it. All four times, it has been repaired improperly or diagnosed as “nothing wrong with it”. My refrigerator constantly runs, eventually forms an ice wall of back of freezer, and then eventually ice gets so thick to where it stops regulating temperature. All four times, I have had to throw away all my food, defrost the fridge on my brand new hardword floors, and take off work so I can be home for these 4 hour window “service repairs”. They refuse to replace the appliance. UNBELIEVABLE. Never purchasing from Whirlpool or Home Depot in Sunset Hills again.

Product number 0733318 Terrible water heater - Check valve went after 2 years. Replacement has to be shipped from TN. $30 to next day it or else I can take cold showers for a week. Warranty does not cover shipping or installation. My opinion, buy puts on WHR. Absolutely crappy product.