I purchased a Whirlpool Duet washer in Jan. 2011 and there has been 3 problems. There has been water leaking, loud/banging noises during the spin cycle, and torn clothing. Technicians have visited 4 times in 7 months. At this point, I forsee more problems in the future. I spoke to a supervisor at Whirlpool and I asked if the washer could be exchanged. I was told, If it is repairable then we will continue to repair it. I was also told that I could purchase an additional 1 or 2 year warranty. A comment like that makes me believe that the company foresees problems in the future as well. A company like Whirlpool should realize that customers should not have to spend time leaving work early or taking off to meet with a technician about an appliance so often or at all! I have owned a washer in the past but it was left when we sold the home and I never experienced any problems!

I purchased a new Whirlpool washer and dryer (model number WED9250WR0 #WFW9250WR00). The washer broke after about 2 months. They took my washer and gave me some off brand one, because I purchased a 5 year extended warranty. They kept my washer for over 3 months, saying that the manufacturer takes that long to get the parts in. Its ridiculous! The tub, seal, and some other parts had to be replaced. It was shredding my clothing and my bedding. The first time they fixed it, a couple days later, it started making a horrible noise. The repairman came out, and a part had fallen off inside, so he put it back on. It kept happening, so I called them back, and he taped the part on!About 2 months later, the seal started shredding, and so did my clothing. I called again, and they had to replace the seal again. It still sounds off balance, and they said that was normal, because of the give in the floor. The day they fixed the seal, I washed a childs sleeping bag, and it shredded it too! I called again, and they refused to replace it, and they want to come and look at it again. My dryer lint trap seal also keeps coming apart, and I have gone through 3 of those in less than 8 months. They said they are just made poorly, so it will keep happening. I just want my money back, and buy a different washer and dryer somewhere else. I had an old pair that I bought, used, and they lasted me 5 years with less problems than these that I paid two grand for.

The American Standard 95% 2 stage variable furnace is by far my favorite furnace to install. I know exactly what to expect from this furnace and I have had zero factory issues with this model. Outside of making a few sheet metal transitions this American Standard standard 95% furnace was very easy to install as well. And like the 2 stage variable … no factory issues.

We bought our washer (Whirlpool Cabrio) from a rent to own company about 2 years ago, and finally got it paid off. About a week ago, the lid started sticking when it was done washing. I went to open it last night to start some laundry, and it BROKE. Now theres a piece stuck in the bottom part of the lock, and the washer wont start. Anyone else have this issue?

I bought a matched set of Whirlpool washer and dryer. Within about 3 months the dryer quit running on any of its cycles except heavy duty. About a month after that the washer started messing up. First it quit putting in the bleach. Next it quit adding water except under the heavy duty cycle. Then after about another week or so it quit putting in fabric softener. After a couple of more months it only uses hot water. Now not quite a year after I purchased it the washer now only adds water in the wash mode and not the rinse cycle. Now all this would not be a problem except I had lost the warranty cards and in their website would not let me register it online.

I have called Whirlpool six times to request a replacement for a broken deli drawer in my refrigerator. I was told to throw everything away from the unit, since the whole assembly would come complete in the mail. First call: Ordered the replacement: what came was a glass shelf without a drawer or gliders and hardware. Second call: requested the drawer and remaining parts. Third call: only received the plastic drawer without any means of installing it. Fourth call: received only one side glider, again without hardware to install. Fifth call: requested a supervisor (Kimberly) who took the order for the remaining glider and all hardware. Received second glider and (1) screw when two are needed.Sixth call: asked rep Brigitte for a supervisor and was not connected. Given the run around and told that the rep spoke with a supervisor for me and would send out a repairman to assemble the unit. I just need the missing screw. I have spent a lot of time on the phone trying to get what I need from Whirlpool and do not have time to wait for a service repairman to come out. I just cannot fathom how that many calls - with me being patient and calm - cannot produce the required items. Horrible.

I submitted a complaint several days ago about my 3-year old Whirlpool Duet washer not working and costing $550 to fix. I decided to just replace it so my husband unhooked it this morning. We were going to to try to sell it on Craigslist as is. I pulled out the laundry detergent compartment to clean it because I had filled it with detergent and fabric softener the other day. The smell that came from inside the washer where the detergent is dispensed was awful. I looked inside and it was completely filled with mold. I had periodically run the clean cycle with bleach but apparently this did nothing. I am writing this second review to warn people about this. I am going to just trash the washer now and I hope this has not affected our health in any way. For those of you who are thinking about purchasing this washer or one similar, I strongly urge you to stick with the plain old top loader. That is what I am going back to.

After reading endless stories regarding Whirlpool water heaters, I ended up here and read numerous complaints and every company response had the same message from Chris-- Go to whirlpoolwaterheaters.com/help. I went to the website and called the number (877) 251-1679. I spoke with the most helpful gentleman (Lenny) who helped me troubleshoot some things and even called me back to inquire regarding success and gave me other tips to check if the problem occurs again.

Purchased Whirlpool refrigerator at Lowe’s. Refrigerator would never get cold enough, so I exchanged with a Whirlpool Gold side-by-side refrigerator. After installation coffee was spilled behind refrigerator. I was unable to pull refrigerator out from wall to clean coffee spill from behind. When checking with Lowe’s on the 35th day, I was informed that Lowe’s 30 days warranty had expired and I would have to work directly with Whirlpool.I discovered it was very hard to communicate with Whirlpool; there was a problem that they only had on file the first refrigerator I purchased not the one I kept. The Whirlpool service rep did not seem very cooperative but with insistence they told me they would change my information to the correct model and serial number and a repair order was sent to a local service shop. The problem with not being able to roll the refrigerator out from the wall is that Whirlpool had changed their wheels to a tri-wheel support and there was not enough height on the single front wheel to lift the refrigerator to clear the screw down leveling stops on each corner. The service rep had no solution for the problem and had to call the Whirlpool service. He indicated he never was able to get assistance from that department. I told him I would talk to them as the consumer but they refused to discuss the matter with me, so I gave the phone back to the service tech. Whirlpool told the service tech to order replacement wheels of which I knew this would not resolve the problem.After two weeks, the replacement wheels arrived, the service tech installed them and as I expected they did not resolve the problem. I then requested the service tech to remove the rubber from the stops on the corner to allow for the additional required clearance and this solution worked. This is a very poor design for Whirlpool, but I accepted the results. Two weeks later I receive a phone call from the service business and they tell me that Whirlpool did not have the refrigerator model/serial number they worked on. Whirlpool was not willing to resolve the problem I had with them initially and the service business would have to bill me directly and was not covered under the warranty.At this point I lost it and informed the service business I resolved this model/serial number with Whirlpool before. Whirlpool gave them the authorization to work on the refrigerator and they would need to collect the fees from Whirlpool. I have purchased my last Whirlpool appliance mostly because Whirlpool makes it very difficult or refuses to talk to the consumer and it appears the quality is no longer there. Will Whirlpool become the next Kodak? With this kind of service, people will just quit buying from them.

I purchased cash for our new house and we notice a couple of times the freezer would start to thaw and the light bulb would freeze up. It has been ok for a while now.

On 12/27/2013 I bought a Whirlpool hot water heater from Lowes Model NU50T122-403. On 12-13-2015 the pilot went out. When I called tech support on 12-14-2015 they gave number what were call centers or person who returned the calls. So I called a local plumber that I used before. He came out and told me that had to replace the pilot. On the 16th 2015 of Dec. that did not work and told us the heater needed to be replaced. The replacement will happen today I hope with little to no help from Whirlpool. I would advise you to do your homework before you buy a Whirlpool hot water heater.

I recently renovated my kitchen and was so excited to have a new range. Loved the looks of this one so I bought it. I’ve had it a little over a year now, and am so disappointed. The “stainless” trim around the knob area is peeling and the AquaLift self-clean DOES NOT WORK! After the AquaLift cycle, there was a watery mess in the bottom of the oven which was difficult to clean up. It would have been better if I had cleaned it the conventional way. I’m not sure what to do at this point. The area where the trim peeled off looks awful and is very noticeable. Take my advice and do not buy!

I love Whirpool products. They work well, even under hard water conditions. Ive had my Whirlpool washer/dryer for 12 years now without one single problem. Even with the hard water problem in my house, the clothes still come out clean, the dryer works well, I do clean my vent each and every time after each dry. I also have to clean the area where I put my detergent in due to the hard water and the machines are still working great.

The machine was great and handled large amounts of laundry. It was very expensive but my wife was happy with its performance. A year and a half into owning it, the electrical code F70 comes up and it stopped working. When I checked online, I found it is a common problem. I contacted whirlpool customer service and they could not do anything. Spoke to the manager, Kiesha and she refused to help me even though I bought both the washer and dryer for a lot of money. Customer service is not a priority evidently. She denies that there is an on-going problem when both the internet and my service tech say differently.

Handle needs smarter design. I purchased model #WRT311FZDM00 in November of 2015, didnt install in my new home till December. I am a single senior female, so there is little wear on the fridge, unlike a family of several people and with kids. The door handle actually broke just behind the screws that hold it in place, the plastic part of it broke into a couple of pieces. The cost to replace this handle is approximately $80, which is ridiculous in my opinion. Please start making things of quality materials instead of cheap plastic, especially at a stress point of a part. Even I know better than that. All 4 of my major kitchen appliances are Whirlpool, as well as my washer/dryer. I thought I was buying quality products. Hopefully things will hold up better with the other ones.

Our first Whirlpool washer barely lasted 1 1/2 years. They replaced it with another one that broke within 9 months. When it worked, it was great... When it didnt, it either overflowed or did not wring clothes tightly on the second rinse.

I purchased a Whirlpool® 4.5 cu. ft. Front Load Washer with Load & Go Dispenser in 2017. By August of 2020 the washing machine was no longer working. The machine would continue to fill with water and not shut off. The machine would then give an error of E01 and F03 and drain all water within 5 minutes of the wash load starting. I had a certified Whirlpool technician come and diagnose the problem for $99. The technician said these error codes happen ALL THE TIME on Whirlpool washers. The technician tried to replace the water pressure switch with no success. He then spoke to a corporate office and was told we would have to replace the motherboard for over $500. The total cost for the diagnosis and repair was almost the exact price I paid for a new washer just 3 years earlier. I will NEVER purchase any Whirlpool appliance ever again.

Microwave model WMH73521CS-2: Microwave is approx 2.5 yrs old. This is the 2nd time we have had problems with door open and close msg appearing on display. We had to have door latches replaced once and again are having to have it serviced again. $100 for service to come out again, does not include cost of replacement parts. This seems to be a consistent problem with this model. We are not replacing the parts and are buying a different microwave. Definitely not Whirlpool. I called Whirlpool and was on hold for almost an hour and received no resolution to problem.

If you are in the market for a new washing machine, steer clear of the Whirlpool Cabrio (or any Whirlpool for that matter). We have had issues with ours from the beginning. We had Whirlpool techs come out and were continually unable to fix the issues. Eventually they told them that it was not broken, even though one tech told us it definitely was. After four service calls they just stopped sending out techs and told us too bad. Now after less than two years it is leaking from the bottom. Yeah, Whirlpool, theres no problem with it. Save yourself the potential headache and get something else. Anything else.

We purchased the Whirlpool Gold Gas Range (model #GW399LXUQ06) in November 2011. Last week, I noticed the porcelain enamel finish on the stove top grates has fallen off in pieces. I contacted Whirlpool today, February 14, 2012, about this issue and they advised me it is a cosmetic problem which is not covered under the warranty. They advised me that it would cost over $100 per grate to replace. We have had this stove for less than three months and I feel these grates are defective and Whirlpool should be responsible for replacing them. I am very dissatisfied with this stove.

Had unit about 4 yrs. No problem with unit, work great. Easy to clean, stand up to every day use, heat dishes and popcorn three level no issues, heat dishes, defrost items, cook food at several levels.

Too many times my clothing comes out dirtier than what it was going in... Sometimes my clothes come out dry in spots, never washed, lint and white soap spots on clothing as if never washed after a whole cycle. Huge waste of money and time. Cant trust any positive reviews about Whirlpool, they have to be rigged!!! I will never purchase another Whirlpool product again.

My story begins in August of this year when my wife and I built a new home. The builder provided Whirlpool appliances in the kitchen. The fridge has continually tripped the breaker and after numerous visits from the builders electrician, we finally also had the Whirlpool service technician check out the fridge too. After the control board was replaced, and the interior light housing was replaced, it turns out the wiring harness in the fridge is faulty and is not repairable. According to your customer service team, the fridge will need to be exchanged. I have made numerous calls to the suggested numbers (866-698-2538 & 800-253-1301) to find out the status of the exchange. Each time, I have been told that my file is with the review team, and that if I have not heard from them in the next three or four days, that I should call back again. I have not been able to contact the review team directly myself, as your customer service team is either unable to or is not allowed to share those contact details. So I am relegated to wait and then call back again. I have lost track of the number of calls I have made, and the hours spent on hold because of the high volume of calls or re-telling the whole story. The fridge was determined to not be repairable on November 19th. I am not sure if this is the treatment you intend for your customers, or if this is an anomaly.

Purchased a new Whirlpool washer and it has the sensor-- like I am too stupid to decide on the level of water to match my load-- not sure why I got an agitator because I am the only thing it agitates. The clothes just sit there in its own filth and then go in the dryer. Actually put a stained item in the wash to remove the stain and instead it just spread to other clothing and has stained and possibly damaged them. Washing the same clothes 3 times is not saving energy, water and time for me.

We purchased a Whirlpool Cabrio model # WTW6400SW3 in 04/08. Approx. 6 months ago, the washer started to be un-level during the spin cycle. This has progressively become worse, it now becomes un-level during the rinse cycle. We spoke with the appliance store where we purchased it, ;hey said the repairs could cost $400 or more. Thats nearly half of what it cost new. Like other complaints Ive read, cheaper washers have lasted years longer than the Whirlpool. Our last washer, a Kenmore, lasted 15 years.

My dryer has to run twice to completely dry my clothes. I had it serviced still a problem. My washer has had some issues but repaired and working fine. I will never buy this name brand again. Not sure what I will buy next.

I have the Whirlpool Gold microwave model GMH3204XVQ-1 manufactured in May of 2010. The plastic around the lower door handle is cracking (currently in 4 directions from the handle) and the plastic on the side of the control panel is cracking in the center area and lower side. Neither of these area experience abnormal stress in day-to-day use. Unfortunately I could not get a good photo of the other crack on the lower corner of the control panel but included the one on the side in the middle. I contacted Whirlpool customer support about 1-2 months ago and to date, have not received any type of response or concern from them about this issue.

We recently purchased a Whirlpool fridge, model WRT138FFDW and are very disappointed with a couple things. First of all, the refrigerator arrived with a broken shelf. Although it was no problem getting a replacement, we found out quickly that it is very hard to balance things on a wire shelf. Water bottles and the like fall over. It is completely our fault for not noticing when we purchased, but just giving you a heads up that it will be a pain for you. Secondly, the sound of the fridge is very loud. It truly is driving my wife crazy. When we called Whirlpool, we were told that if they come out to take a look and the part is not under warranty, we would be charged $129. It is a brand new refrigerator, how can some parts not be covered??!! On a positive note, it does keep things cold and the color white is nice. I will not be purchasing any more Whirlpool items for my home. Bad fridge and customer care!!

I have the same problems as the ones listed in complaint section. I bought 4 Whirlpool products at the same time: refrigerator, stove, and the Whirlpool duet. Washer is a front loader. We have had nothing but trouble. The company we bought the machine from exchanged the washer for the same model because the electrical was bad and the parts to replace were back ordered for more than 3 months. We are now having problems with the exchange washer. This time it is the same as the engineer remarked in his complaint the bearings are bad and it sounds like a jet taking off. It’s that loud.I went down to the place of purchase and I am in the process for the repair. I have a feeling this will not end well. Whirlpool, if you call them, gives you a run around or tells you they dont have you listed in there computer. We dont have the money to replace any of this. This new machine is only 9 months old. Whirlpool is making a killing off of fixed income people and the working class. You tell me who can afford the cost of that kind of repair or the cost of a new machine that only works for a couple of months. Why is 60 Minutes not on them like a bad smell?

From day one I was not happy with the new auto fill washer, I was told I just needed to get used to it! Well I have tried every cycle available and no matter what I try cloths don’t come out clean, using the deepwash cycle Sheets on top were still dry once cycle was completed!! Give me back my old washer! Washed much much better.

Only problem is you have to open door to access functions. 30 second increments and stop are on outside. Beautiful to look at and inside is easy to clean. 4 fan levels, vent inside or outside. 2 light settings. Nice and bright. Low profile over stove but big enough to hold large casseroles.

I love my ceramic top. My only complaint is I wish my knobs were on the front of the stove because I am short. It would be nice to not have to reach over hot burners just to turn the temp up or down.

Whirlpool refrigerator is 2 years old and has LED lighting. Light went out in freezer and dimmed in refrigerator. Requires a technician to replace them with 3 hours of labor due to wiring. Total cost parts and labor $700. Whirlpool has a one year warranty and was unwilling to repair at their cost. Warning - do not purchase any refrigerator with LED lighting that requires a technician to replace the lights.

I have owned a Whirlpool Cabrio model no. WTW7800XW2 washing machine for less than 3 years. The plastic frame for the top glass lid cracked (on the right next to the spring loaded hinge). After reading that other people have had a similar problem, I contacted Whirlpool about this and talked to its TN call center representative. I requested that Whirlpool repair the appliance free of charge since there is a known defect with it. She said Whirlpool would only offer me a 50% price reduction from the retail cost of the lid plus charge me shipping and taxes. I will not be buying another Whirlpool product as a result.

Plate in front of the door that is at the back of the water dispenser bowed out. Company will not fix even if the refrigerator is not a year old yet. Said it only covers things like this for thirty days. Do not buy a refrigerator that Whirlpool will not stand behind.

I purchased a Whirlpool top load washer that has been ruining my wasted items. My terry cloth towels all have pulls in them, knit polo shirts have pulls and holes, sheets and other items of clothing get caught and stuck under the agitator which then take a great deal of muscle power and struggle to release them. I have had the agitator replaced 3 times to no avail! Whirlpool is not willing to admit that I have a defective machine and will be sending another service repairman to try and fix the problem - this time, no charge to me after many tries and frustration. Customer service is not good unless you are lucky enough to get a supervisor who is willing to listen. We shall see what this next service call brings. I do not have high hopes and will keep you informed.

DO NOT BUY THIS MACHINE. Mine is less than 2 years old. First one month after warranty expired, the clear lid cracked...$350 to replace! Then a few days ago a rusted circuit board came apart and jammed up my washer. This should NEVER happen. I contacted customer service and they told me that they are not covering this problem and that the service call is $175 and cannot estimate the repair cost. They also could not send a repair person out for 5 days. The washer has not been repaired yet so I do not know the entire cost but it will be expensive!

Purchased 12/15/14 > Two weeks. Freezer 1/2 working, no cooling refrigerator. Contacted whirlpool, a service tech was sent out, tech contacted factory for assistance. Factory service had limited information on new production model, replacement part availability unknown. 48 business hours to conduct research. Six days to figure out what part to order/replace. No further assistance will be provided by whirlpool.

Dont buy. Purchased over the range microwave. Service order less than a week after install. Heats unevenly. Burns center of bacon consistently without fully cooking ends. Popcorn pops half the kernels yet Whirlpool says nothing wrong with product. Well within 1 year warranty but had to pay for service call cause Whirlpool determined microwave was operating as manufactured. Laughable! This company does not stand behind their product or their customers. Never again will I purchase a Whirlpool product.

I have clothes that are coming out torn with large holes, especially cotton items. I dont know if it is the washer or dryer.

Why are the Whirlpool appliances so badly made that they are not fit for normal use? Are they buying substandard parts? Do ConsumerAffairs advocate for more robust, long lasting products, particularly with current sustainability concerns for the world? Having to buy a new motherboard and burners, cups and knobs after a couple of years of normal, careful use, is unacceptable, surely? The motherboard, burners and fitting charge is almost half the cost of a new appliance (gas range). Is this acceptable?

We have several Whirlpool products in our home currently and have been very satisfied with their performances. We have their fridge, stove/oven, microwave and dishwasher, all of various ages. We purchased them from a local big box building supply company and installed them our self. The installation directions are clear and simply for the average D-I-Yer. We would recommend Whirlpool to everyone shopping for these home appliances.

My elderly parents had everything they own destroyed in Hurricane Sandy. After rebuilding their home, the new Whirlpool washing machine was broken. Whirlpool refused to disconnect and remove the machine that was obviously broken before it arrived. This is something that no one should have to go through. It is appalling and bad business. Through the kindness of friends, we had several male friends help with the removal. Truly shocking, that this is how Whirlpool handled this situation.

We have had the washer and dryer for over 10 years and they are still working great. We have had washers and dryers in the past within 2 years have failed, and repairs have cost us almost as much as a new one. Thank God for the ones we have now.

Purchased the Whirlpool Cabrio supposedly a top of the line washing machine? Not even three years old, used 3 times a week for normal to small loads, for a family of three. Stopped spinning water out, so clothes are soaking wet at the end of the cycle. Repairman said I need a new transmission and inner spin basket is completely worn. New parts will cost me around $500!!!! Repairman said this should not be this worn down in 2 1/2 years. I purchased this machine to replace a Roper brand machine I purchased used for $200 and had for over 10 years without issue! I will NEVER buy Whirlpool again. They do not stand behind their product! I should not have had any issues with this machine for at least 10 years!

I have had my machines for years, and always buy Whirlpool. So far so good, had to replace my washer and dryer approx 11 years ago and still ok no problems yet. Wish I had the money to buy one of those bigger ones someday.

Whirlpool duet - I have had this machine for 4 years and have gone through as many door gaskets. They rip in no time causing damage to clothing and with the leaking damaging my wood floors. A definite do not buy!!!

I bought a Whirlpool washer and drying matching set (model 6400sw3). I liked it because it was extra large without agitator in the middle. Ive had it for about 2-3 years and I have already replaced the drain pump, motor and barrens, it has cost me over 500.00. I thought now OK its working fine, but now its giving me a code every time I wash of LD. I am so fed up with this!! I should have bought a new washer but I felt as much as I put into it, I basically built a new one. And now this code comes up every time and I have to power it off. Im not sure if anyone else has had this problem but I just dont know what else could go wrong with this. I will never ever buy a piece of junk like this again!!

I purchased this water heater (Model# E2F40RD045V, Serial# 1122T461615, Product# 0826354) 1 week ago (Oct. 17, 20011) and it has been installed only after 5 days (Oct 25, 2011). It has yet to heat the water more than warm. I called Lowes (Oct. 21, 2011) and tried to return it only to be told that I would have to get an authorization number from Whirlpool. I called and Whirlpool wanted me to trouble shoot the problem. I had to have an OHM meter and amp meter to do so, which means that I needed to have an electrician present to do these test because I dont own any of these things. I was then told that they could send someone to my house, but I may end up paying for this. I then asked to speak to a supervisor and was told that she would tell me the same thing. The call ended when I told them that I guess I would have to do the best I could because I was not getting any help from them. Out of desperation, I went back to Lowes and got a new heating element to try to fix this problem myself. I installed it and it still did not work. I called back the next day and still did not get any help, I was only told that I needed to have these meters on hand to trouble shoot the problem. Why is it that I have to do this? The lady did not seem to care that I did not have any way to handle this problem. I felt that this problem was my burden and not Whirlpools for putting out a defective product. I have in my home about 5 new Whirlpool major appliances and have been a loyal customer for many years but after this incident, never again. I will also be advising my friends how Whirlpool has treated me. I am very disappointed with your customer service or should I say lack of customer service. I was told that had I said that the water heater was leaking, I would have been given an authorization number immediately! I still do not have any hot water as I sit here typing this complaint. I am sure that Whirlpool is really concerned as you have my phone number and address and your representatives are aware that I am very upset but still no one has even tried to help me other than telling me that I have to trouble shoot the problem. As far as your rating go with me you get an F!

Bought microwave two years ago, almost immediately when stove area got warm, the microwave would not work properly. It would beep, the info keypad would cycle, then freeze up. After unplugging and letting it sit for a while, it would work fine for a time. Now it doesnt work properly at all. We keep it unplugged until we need it then it may or may not work. I have had a service company look at it and the only thing they could figure was that was an electronic failure from the heat. I am concerned that it is a fire hazard and leave it unplugged. Not what I expected from a $1000 appliance. I wish there was a class action suit that I could join.

Very reliable and cleans clothes very well. I have used almost every machine on the market, and none compare. Very quiet and I use very little detergent and CLOTHES come out very clean every time. I am just very satisfied with my experience.

I purchased a new French door refrigerator in May of 2016. Professionally installed. Last May 2017 icemaker stopped working and was replaced. June 2018 icemaker stopped working. This part of the refrigerator is poor quality and because of that I will never purchase another Whirlpool appliance. They use to be good quality and dependable. Not anymore.

My new energy-saving Whirlpool washer sucks. Laundry comes out smelling as bad as it went in. Washcloths are as dirty as they were when they went in. I have to take my dogs bed blankets to my sons home to wash them because this new washer will not even clean blankets.UPDATED ON 08/21/2015 - I have had two Whirlpool washers in 38 years. They were great. I buy a new up to date energy-saving Whirlpool washer and it doesnt last a year and a half. Now it is costing me $433 to have it repaired. I am preparing a washer and I am very unhappy with to start with. I will never recommend these washers.

I have used Kenmore products for about 50 years, so when it came time to replace my old washer I looked at Kenmore/Whirlpool. I upgraded to the top of the line. I had been warned by 2 service techs (2 different companies) that had tried to keep my old Kenmore alive that the new ones are not up to par compared to the old ones. The first very small load that I tried, was not even thoroughly wet when I took it out to put in the dryer. 1st service call, tech suggested that I put machine on extra water.That helped sort of. A few weeks later, wash is not getting clean. Called Whirlpool, they suggested getting the washer cleaner and clean the washer. Went out and bought a special cleaner, $10-12 and two cleanings later using the extra water and extra wash water I now was getting cleaner clothes. They said I would need to clean the washer every 2 to 4 weeks. I have continued to use washer but frequently have to rewash about 1 in every 5 to 10 loads as it doesnt always clean everything in the load. Called the Co., they sent service out, they said its OK!In Jan. We went out of town for 2 weeks. The washer had not been used for 4 days before we left. Came home to water all over the floor which are hardwood. Needless to say our hardwood is all warped! Service came out, ran the washer for about 15 min. and said it was fine, nothing wrong! Called Whirlpool again! Washer is now out of warranty. They said call a local service, out of their hands as it is out of warranty! Nothing more than they can do.I have used Kenmore/Whirlpool Appliances all my life and they have been wonderful. The new ones are garbage as far as I can tell. I have a Refer that is now 3-4 years old and I have had problems with that, a new dishwasher that is 2ish and have had service out on that one, now my brand new washer top of the line and it is so bad I am afraid to use it unless I am sitting right in front of it watching it! Further if you have the rinse cycle on the clothes come out so wrinkled that you need to get out your iron out and iron everything including sheets and linens. Lucky that I did not replace my old dryer! Do I recommend Whirlpool anymore? Not on your life. I wish I knew what to replace them with!

We purchased a Whirlpool washing machine for $600 from a local retailer and it broke down within three months. It is now been two months and two repairman visits later and still not fixed. I called them and talked to customer service who then transferred me to another department. So far it’s just been the typical runaround with no results. I demanded an immediate replacement but was told that would need approval from yet another department. I don’t remember what departments are involved nor do I care. I am simply disgusted with this baloney.

Please do not buy any Whirlpool product. Worst product and customer support. I got a new refrigerator on dec 2020, just after 1 month I started facing issues. I complained about that and 3 times they changed many parts. Still I am facing same issues. It doesn’t cool, makes too much sound. Every time I have to spend 30 mins in registering a complaint and sometimes they just close it on their own without even attending to it. So weird. Though the product is under warranty, it’s been more than 6 months that nobody has rectified the complaint. Even now my complaint is still pending. If I call customer support, they just provide some number and ask me to call them. Service representatives take their own time and not at all Serious about complaints. This kind of service they provide to customers. Beware of buying whirlpool products. Worst ever products and service.

Whirlpool Gold Series Dishwasher Model # WDT710PAYM6 - Purchased this dishwasher in July, 2014. Last week the dishwasher powered off mid cycle. Could not power back up. Tried a few suggestions found online to reset which did not work. I had both a plumber and an electrician look at it. All water lines were fine and power coming in and out of dishwasher and control panel was checked and all looked okay to electrician, but could not get the machine to power up. No longer under warranty. Very dissatisfied there is no recourse.

I had my range installed in January of 2015. The very first week, using a new Farberware non-stick skillet, the cooking surface became permanently scratched. Could not polish it out, and polishing - it must be done every time you cook on it! In early September the cooling fan for the electrical panel went out. Also, the convection oven would not maintain heat. Had the cooling fan replaced last week. Its out again, along with the convection oven not maintaining a regulated temperature. Also, 3 months ago, my grandson put a ceramic casserole on the stove top. After he took it out of the oven, it permanently scratched the paint off the control panel. Im very disappointed in the fragility (painted plastic surrounds top of control panel) and unreliability of this product, a total lemon.

I bought Whirlpool top-loading high-efficiency low-water washer Sept 2018, model WTW5000DW, Serial # C83444466. Worst washing machine ever! No matter which water level you choose, it will not dispense enough water to cover the top of the clothes load, therefore the clothes are just moved from side to side with only the bottom layer of clothes getting wet; top clothes stay dry. Not enough water to fully agitate to clean the clothes!Whirlpool serviceman came today (Jan 13, 2020) to recalibrate the settings. VERY NICE MAN BUT THERE WAS NOTHING HE COULD DO TO SOLVE THE LOW WATER LEVEL. Recalibrating settings did nothing to solve the problem of not enough water. I am 81 years old and I have to manually add at least 4 buckets of water to an average load of clothes. This is unacceptable. Wont someone please initiate a class action lawsuit against Whirlpool for selling this very obvious poorly designed machine? NEVER EVER BUY A WHIRLPOOL WASHING MACHINE. It is a waste of money.

I purchased Whirlpool 6.2ct electric range on 3/16/2013 from Lowes, Fremont, CA. I tried to bake my cake on 11/19/2013, and preheat it to 400F degree. When the temperature achieved to 400 degree, I put my cake in not even 5 minutes and go to dining room to pick up something. When I turn around, I saw the oven window is so bright and I open the door right away, it has fire from the left side bottom. I turn off the power right away but still has big fire. So I use the fire extinguisher to get the fire off.I went to Lowes to complain, this product is still under the manufacture warranty and I also purchased two years extended warranty from the store. Lowes sent the 3rd party technician over to check, they open the bottom element and insist I drop something to catch on fire. He tried 350F degree is working. But the fact is, theres nothing dropped, no oil, water or and any ingredients, only fire extinguisher powder all over the bottom. Technician put back the cover, I asked him, How do I clean up the bottom extinguisher mess? He said, You dont need to, just clean the top, and wont try 400F degree for me since the top didnt clean up. I asked him, I am so fear to use it now, you asked me to clean it up and try again. I only use my oven to bake cakes, cookies, and muffins, and that day the cake even not still raise yet. How could it catch on fire? Is this product defective? I doubt it.I also called Whirlpool, they said most likely its short circuit. They only provide the repair, unless it cant be repaired, then they replace it. Manufacturer also told me that my temperature is high. I dont think so. I have no problem to use any oven in 425-450 in the past. If this is high, why your stove has function to that high degree? I am so upset with both services. From my concern, nothing dropped to bottom and caught on fire. They all refused to replace the new one and asked me to continue using it. I really dont feel confident to use this one and dont know who can help me to replace it.

I purchased a set of Whirlpool Cabrio Washer/Dryer. After 12 uses of the dryer, it doesnt work and now I have to pay for the service. I didnt think Id need an extended warranty since my other 2 brand name washer/dryers lasted 15 years!

I purchased a Whirlpool accubake oven in 2010. The repairman has been out to repair it 5 times. Thats right 5 times. It wont maintain the baking temperature. They have changed the mother board, the ignition switch, the harness, and the thermostat. Every time the repairman leaves it works and then I go to bake something and it doesnt. Once it reaches 350 degrees the oven cuts off. You can hear it trying to ignite but its like the fire doesnt catch. I have to shut it off, press bake and heat it up all over again. This is so annoying. Bad thing is I like the look of the oven but clearly this is a shotty product. I will never buy a Whirlpool again.

The new? improved model with NO center agitator is the worst - clothes tangle badly and the load becomes very unbalanced, wobbly and noisy. How I got talked into this model by a Sears salespeople was a big mistake!!!

It’s the same thing as all other reviews. The Duet washer’s eating my clothes and shaking violently, even with small loads. Forget a service call from Whirlpool - they say nothing’s wrong and I have to pay for the call. The service guy talked to me like I have never done laundry before. This is my third Whirlpool and my last. The first two were great, but the new Duet is a nightmare. Buy Samsung or LG because the Sears brands are made by Whirlpool and they are just as bad from all reviews I have read.

Whirlpool Washing Machine WTW4800XQ4 - This is an expensive piece of garbage. My clothes come out with lint still on them. They do not smell clean and in fact, I wonder if they even are. My blankets come out heavy and soaking wet, so much so that I have to repeat a rinse and drain cycle before I can place into the dryer. The machine is always off balance and its so loud that my almost deaf grandmother who cant hear a thing wants to know what that noise is when shes halfway across the house each time Im doing laundry. Ive called Whirlpool and they have sent a tech out who insisted it was I who did not know how to load a washer and that was causing all of the problems. I found this interesting since I am 37 and never encountered difficulty with a washing machine before. Our visit concluded when he insisted it was user error and went on his way. The next day, the washer was not even cycling, and I phoned whirlpool back. This time, there was a computer problem and there was no arguing about it. The technician came back out reset the internal computer. The machine seemed to run more quietly for about a week, but went right back to its old loud self. The only improvement Ive noted since then is it does not move across the floor now while washing. I wish I never bought this thing and would certainly never recommend it.

Another reviewer complained about a knocking sound upon startup. My Brand New fridge has been doing that and I have just ignored it. Maybe I shouldnt. Compared to our original Beaumark fridge, the Whirlpool is VERY NOISY.. Since the actual workings seem fine, I am not complaining but rather quite concerned.Especially after reading the numerous Negative Reviews.

We purchased a Whirlpool Gold Induction range, model#WF1910H0AS0, from Lowes Home Center for ~$1700.00, about 1.5 yrs ago. One night my wife was cooking dinner on the stovetop and she heard 2 loud pops and the whole cooktop went dead. We had Bobals appliances repair look at the range and they gave us an estimate of $800.00!! to replace the module board. The repairman said the module board had shorted out and burned. Thankfully my wife wasnt electrocuted. I contacted Whirlpool customer service, they said, There isnt anything they can do. The warranty is only 1 year. I also contacted Lowes customer service. They told me the same thing as Whirlpool, nothing they can do, 1 year warranty, etc. I have the part# of the module in the stove, W10390743, serial#31811552. After an internet search, this part # had been superseded, which tells me Whirlpool knows they have a problem. These ranges need to be recalled. I plan to contact the US consumer product safety commission to initiate a recall. Please inform consumers if they have this Whirlpool induction range with this problem, to also notify the Consumer product safety commission.

My dishwasher is really a simple basic dishwasher. It is efficient and does a good job of cleaning. You can put many items in the top and bottom and the utensil basket can be moved for better cleaning or more room. If I had one complaint that would be that it is a bit too loud but other than that it is wonderful.

I purchase newly Whirlpool washing machine but it was not working from the first day of my purchase. So many service Engineer came but nobody can solve the problem, so I suggest to all please don’t buy washing machine from Whirlpool. I am very disappointed from this company.

My oven had been temperamental since day one, then got worse over time. I do not use my oven that much so was not really worried or alarmed until a tray of cookies caught fire. It was set at 350 and jumped to 525 on its own. (I bought an oven thermometer to monitor) Minor burn taking tray out but all okay :-). Contacted Lowe’s where we bought it and they would do nothing (note: at this point the oven is 15-months old and out of warranty). Advised me to contact Whirlpool. Did that - they sent out a repair service and they determined it was the temp. sensor. It is now April 2014 and I am still waiting for the part (this all started Sept 2013). I have since talked and wrote to Whirlpool for this to be resolved and also asked that the range be recalled due to fire hazard at the least! When I spoke to them in December, they said they could give me ‘50% off the part’. Remember I am still waiting for that part, lol! After writing corp h/q, they said “Sorry, since we cant get the part why not have someone come in and take the old part out and have it rebuilt.” I ask you Whirlpool w/q would you be happy with that??? Will post any follow-ups... would love to hear from anyone else with this problem - model # GFE461LVS. Great day everyone. :-)

We just purchased a new fridge - September 2021 -- Whirlpool side by side. Why is just okay? It is a loud refrigerator. A roaring sound is pretty constant. The ice tray in the door has no recessed tray ... so water and melting ice just follow down the front of the door and onto the floor. Two days after purchase we went back to Lowes to return this fridge ... but all the other refrigerators do not have a recessed ice tray. And since they are not plugged in ... who knows if they roar.

First whirlpool 3 door with ice maker in door failed in less than a year. Took 6 months to resolve issue, several service calls, at least 30 calls to Lowes and Whirlpool with little or no response. Nobody wanted to take responsibility to do something about my broken fridge. Even the authorized repair guy didnt want to touch it, didnt want to ruin his reputation because they wont stay fixed. Another service guy wanted to take it to the shop to repair, of course I would be responsible for pickup and delivery charge. Found out the repair was an in home repair, so didnt use that guy, I felt like he was trying to rip me off.I finally got to the right people in whirlpool organization and they replaced the fridge, that took another two weeks. I found everything takes two weeks. The replacement was supposed to be same model with upgrade, this is gold series fridge Ive been talking about. New fridge has failed also, seems like same symptoms. It lasted 1 yr and 4 or 5 months. I guess not too bad for a top of the line refrigerator, made by Whirlpool. Gonna give them a chance to make it right or I am considering hauling it around in my truck with a sign on it. Not trying to punish the distributor, just Whirlpool. This product is so bad the government should step in and force Whirlpool to give money back.

My $2000 Whirlpool oven broke after only 2 years. Whirlpool only stands by their product for 12 months because they have no faith in their own product. They want me now to reward them with more money to purchase a years warranty.

I bought a Whirlpool duet washer and dryer. These appliances are still under one-year warrantee. My washing machine was broken for four weeks, and they have been unable to receive all of the parts needed to repair it. They have made three appointments to fix the machine, telling me that they have the parts and only to cancel the appointment the night before. I have tried to get Pacific Sales to exchange the broken machine, but they will not do that or compensate in any way. This is a top of the line model; I would have been better off with a low-priced model, and I might actually have a machine that worked. Whirlpool supposedly had the parts on back order, which is not what Whirlpool informed me when I was able to reach them.

Ive been a landlord since 1997 and have multiple sets of coin laundry machines. The older Whirlpool machines are great and have lasted 25-40+ years with almost no issues. Replaced a washer with this model 4 years ago and have multiple problems. Im buying a used coin operated washer thats older than this model just to get rid of it. Cost of parts is almost half the cost of a new washer, and adding on labor and time makes no sense. Very happy to get rid of it. Electronics instead of mechanics has been the problem. Electronic switch that is activated with the coin slide broke, the main board fried, and the lid switch has caused problems

Ive owned this Whirlpool, bottom freezer refrigerator for two and a half years now. About a year ago I began to notice water on the floor in front of it. I had the ice maker hooked up, which I never used, so I disconnected that. The problem continued. I discovered that the bottom of the freezer compartment would fill with ice and once full the next dose of water would flood the surrounding floor. I have cleared the ice out, on a weekly basis, but have still had the water flow onto my floor. Its a daily thing now as Ive gotten tired of pulling the unit out and removing the ice build-up on a weekly basis. My replacement refrigerator will not likely be a Whirlpool of any model.

August 15, 2011 - We purchased a new Whirlpool Water Heater Model N50T61-403 for $398 from Lowes. We used their recommended installer (that was our first mistake!). He made the following installation mistakes: 1. He connected the hot water to the cold water & the cold water to the hot water. 2. He installed DRYER venting instead of HVAC venting. 3. He used flammable tape on the venting instead of screws. 4. He had incompatible metals touching near the gas line which can create an electrical charge & thus, a sparking situation. 5. He left us with a gas leak. 6. He did not install the screen that is supposed to surround the base of the water heater.7. He failed to strap down the expansion tank.These failures were discovered by an HVAC person who was in our basement to give an estimate on a replacement of the furnace & AC coil at the same time this genius was installing our water heater. The installer overheard the comments & literally... he disappeared & we never saw him again! We told all of this to Lowes & they were not phased in the least -- indeed, they didnt even seem surprised! They sent out a few other guys from the same company to correct the errors. So, it finally was installed & passed the county inspection & we had hot water again... for a little while. Within a few months the water heater pilot light would not stay lit. I was having to relight it once a week or so. After much arm twisting, we were finally able to get Whirlpool to send out a new pilot light assembly and pay for the installation. It was installed July 25, 2012. And.... it worked for 8 months. After returning from a trip on April 30, 2013, we went to take showers & the water was cold. The same problem was happening again... The pilot light had gone out while we were out of town & it will not stay lit & I have to relight it every 2-3 days.We talked to an assistant manager at the Lowes store where it was purchased. He talked to Whirlpool & Whirlpool said they would pay for the parts but not the service call which would be $149. I also learned today from the same manager that Whirlpool will not replace the product until they have replaced the same parts three times. Hmmmm.... Lets do some basic math here. $149 x 3 = $447! Thats MORE than the water heater cost! We believe that the water heater has been defective from day one & we also contend that their replacement part for the pilot light assembly is also defective (by design??). A pilot light assembly should last longer than 8 months!We are getting ready to build a new home within the next year. We will get to choose our supplier & the manufacturer of the appliances that will be in our home. Needless to say, Lowes will not be on the list. They keep saying, Our hands are tied. (Not buying it!) And Whirlpool will definitely be off of our list as their customer service is the worst Ive ever seen & their product quality is sub par. The other thing I experienced with Lowes was that when I tried to leave a review on their site for this specific product... twice... both reviews were rejected. The reviews presented the facts as Ive stated here, but because they showed Lowes & Whirlpool in a negative light, they were not posted on lowes.com. So, consumer beware -- their reviews are heavily screened so that the negative reviews rarely get posted. The consumer should be aware that the reviews on Lowes website are heavily screened & therefore do not equally represent consumers who have had a negative experience. This is an integrity issue.

I bought a glass top stove model number W10221843A. My son dropped a plastic cup on the top of the stove. It put a hole and shattered it. Now remind you, it was plastic. I barely use this side of the stove, so not like it was weak. I paid a lot of money for this product just for a plastic cup to destroy it. Is there any recall on this stove? Any help will be appreciated. Thank you.

We are doing a kitchen remodel and I found the best price here. I was a little skeptical to order a range online, but I did go look at the exact range in the store and decided I would give it a try. I received email updates about the product and during delivery, I received 2 calls.... one to tell me approximately what time the range would be delivered and another when the driver was about 20 minutes away. All around good service.

I knew I couldnt be the only one with these problems. The reviews confirmed it. I bought my Cabrio washer in 2012. Energy efficient, no agitator to catch on clothes, Great. It took me a while to figure out that the machine was eating my clothes and not cleaning them at all. Oh, they smelled fresh. That HE detergent smells nasty. The machine ate the edges off my good towels, T-shirts, jeans. Brand new underwear (thick elastic) was stretched all the way out and pulled. Normal stains and dirt do not come out even with pretreating. I started running my clothes on the delicate cycle, prewashing stains in a bucket by hand and then putting clothes in mesh bag before running the load. They still came out dirty and ruined. When I run the loads, it still registers as not being that energy efficient on the controls. Id gladly trade it back for my old washer. I feel like I have stepped back in time to a time where you washed everything in a tub or bucket. What a waste of time.

The washing machine does not wash the clothes. It does not clean the clothes and goes off balance all the time. I have had it 9 months and waited to write the review to make sure I using it properly and giving it a chance but to no avail. It is awful. It leaves white lines on the dark clothes and does not take makeup stains out of the white towels. Those are just a few examples. The clothes have to be washed sometimes twice to feel they are clean enough. So it is not cost effective and uses more water which is counter productive to the HE.

I owned a Maytag washer for 30 wonderful years, so I of course bought a new one. I have battled with my Maytag (Whirlpool) front loading stackable top of the line washing machine for 2 1/2 years. It will not drain, yet sometimes it will. I have played every game with this machine to figure why. I had a repair company out 5 times while it was under warranty and they could never find the problem. It is totally unpredictable. If I could bill Whirlpool for my time and anguish I would own this company!They now say it is the computer board and I will have to pay $350 for a new service contract to fix the machine. I not very politely said that they should pay me for all my emotional abuse. They offered me another option saying they would pay for a service company to come out and look again. However, I would have to pay the labor and material cost. Since I have a stackable unit and it would take 2 technicians I would have to pay $90 for the second person. I was so mad that I called Whirlpool back and they refused to offer me that $350 charge and just said sorry. I are fortunate to have a lake house which needs a new washer. Guess what? It will NOT be a Whirlpool product. I wish I could go to the store where I purchased this holy terror and picket!

One month after the delivery/installation of this new refrigerator, it began making loud noises when cooling the top refrigeration unit. After the 4th service call and replacement parts, the noise ceased for 3 months. The noise has returned and Im now scheduling the 5th service call for the same problem. Thank goodness I purchased the extended protection plan through Lowe’s when I bought my three new Whirlpool kitchen appliances. Whirlpool used to be known for quality and dependable appliances. That no longer is true. SAD.

My new fridge is extremely hard to open. The technician that was sent out told me that there is too much suction building up inside the fridge and freezer and that is why it has to be yanked to open. This is not only annoying it means the fridge is constantly being pulled forward out of place. Technicians solution was to deactive the castors under the fridge. At the time he was here I did not realize that I could then no longer move the fridge out of its place to clean. I called Whirlpool and complained and was told that they could do nothing more for me because the fridge is in good working order. I hardly would call this good working order. They also informed me that if I wished to clean under the fridge or the coils at the back it would require a service call to move the fridge and I WOULD BE CHARGED EACH TIME. Needless to say I AM VERY, VERY UNHAPPY WITH THE WHOLE SITUATION.

0 stars. The refrigerator coil keeps freezing. There seems to be no defrosting, there is no element to do this so it freezes every 5-6 months. No warranty. I bought it as is but seems to me a function it should have isn’t working. They should fix them. Ill guess it’s just business, hope theyre ok with St. Peter’s showing them the way down to hell while he’s saying it was just business.

The electronic panel on my 4 year old barely used wall oven went out when I used the self cleaning function for the first time. It is going to cost $400 to fix it and another $100 to replace the stainless steel sides. They will have to remove to get the oven out of the wall. The oven door is locked and cant be opened so of the wall will have to torn out as well. I called Whirlpool 3 times and have offered no assistance.

I bought my Whirlpool dishwasher, model #WDF560SAFMO in Nov 2016 with a 2 year extended warranty. In Jan. 2021 it quit working, was told by repairman that the dishwasher needed a new pump. Of course, it is no longer under warranty. To replace the pump will cost almost as much as a new dishwasher.

I just purchased a brand new home. I have an electric wall oven with the microwave over the oven. They are both built into the wall. Can anyone tell me why a massive amount of steam is coming out. It is really bad it makes my microwave glass so bad I can see through it. It is also making my cabinets so wet I have to use a towel to dry them. Plus I got a steam burn. Can someone tell me if this is normal.

Purchase 2009 Duet Washer & Dryer (WFW9700VW00). Recently have had error codes coming up - F35 for one. Could not get washer to reset. Had to keep unplugging and plugging back in. Service was called and the tech knew right away what was wrong. He ordered and installed an analog pressure switch. While he was working he mentioned that this was a known error and if we had called with this problem a couple years ago Whirlpool would have replaced the washer. Im not looking for a replacement but I feel Whirlpool should cover the part having been a known issue.

Whirlpool Refrigerator Model # GI6SARXXF 04 Ice Maker - About nine months after purchasing this unit the ice maker began to stop working. I researched what the issue might be. During this time, the ice maker decided to begin working again. This occurred again about 15 months into ownership. At 19 months into ownership, the ice maker no longer works after approximately 5 weeks. Whirlpool will not allow me to purchase an extended warranty. I was told by a CR on the phone. However, she did offer a Repair +1 service contract that cost $345.55. I advised the CR that on the Whirlpool website, I was offered an extended warranty for 2 years for approximately $165.00. After waiting for her to check into my claim of being offered the extended warranty for about 10 minutes, she came back to advise me that no existing issues would be covered. In other words, my $2000.00+ Whirlpool refrigerator is so crappy that Whirlpool only offers a 1 year warranty. And unless I pay $345.55 and/or a service tech charging $129 for a trip charge only, I will not have a working ice maker. Additionally, the capacity for ice storage is extremely small, even for my 2 person household. At times, the ice comes out crushed even though the setting is for cubed ice. The ice shoot is great for taller glasses, but if trying to use a shorter glass, watch out! You will have ice all over your floor every time!

I got a Whirpool Cabrio Washer that I purchased in 2008. I am constantly getting ul code. If washer is leveled, it leaks water out the bottom rear of the washer. Its a piece of junk. I called Whirpool to no avail. Whirpool will not stand behind their product. They know they have a problem but wont do anything about it.

I have both Whirlpool washer and dryer. These are my second set. Whirlpool is reliable & long running. I love this brand! My dryer is six years old and the washing machine is nine years old. Never a problem and they do about six loads a week.

We have the same complaints about the washer as other reviewers -- have to use deep water wash to get enough water in the tub to clean and rinse soap from clothes and we have to keep the loads small. Dryer thermostat had to be replaced right off the bat. Now on medium heat it just burned patterns into two light-weight polyester fleece items -- the clothes came out with the heat input screen pattern burned into them. Now I wonder if they stuck to the heating screen for any length of time, was it a fire hazard? The burned parts of the items are now stuck to the drum so that needs cleaning. So well be using low heat on most everything and drying them twice, since low heat leaves them pretty wet after 35 minutes. So much for buying energy saving appliances which, by the way, we were proud to buy! But, prior to buying these appliances, we had washer and dryers that last 20 years. Built in obsolescence with these new things? I have no faith in the consumer complaint process anymore. The retailer may care as they are a bit closer to the problem, but the manufacturer? Forget it. Vote with your wallet and dont buy these products.

Bought a Whirlpool French Door, Bottom freezer mount appliance from Lowes in Jan 2014. Model WRF990SLAM00. Jan 2015 the freezer part stopped working. Whirlpool approved repairman came and knew exactly the problem because he was aware of this being a consistent issue with Whirlpools. He contacted Whirlpool and they quickly agreed to send repair kit for FREE. Took 2 wks for parts to arrive, and neglected to send along required tool/gauges for repair to occur. I called Whirlpool C.S. and they claimed they knew nothing and said our fridge was on no problem list. I had repairman call Whirlpool and they claimed appropriate tool/gauges are no longer available! This fridge is only 1 year old!!! Now we are completely ignored. Whirlpool will not even talk to us about help of any kind. HORRIBLE customer service!!! Crappy appliance! After thinking our Whirlpool appliances were a good investment, I will NEVER EVER BUY WHIRLPOOL AGAIN!!!

I havent had my Whirlpool Cabrio washer for even 5 years and I have had to replace the glass lid and now the tub bearings need to be replaced... I have read countless complaints for the same issue. I feel like Whirlpool should at least send out free replacement bearings and the $85.00 bearing press tool that you will need if youre handy enough to fix the problem yourself. PS to all of the poor victims of Whirlpool bearings, go to Amazon and you can buy the bearings and the tool for about $150.00. You will need to order bearings part #10435302 and the bearing driver tool #w10447783... And as far as my matching dryer - knock on wood - it still runs great.

I bought a top of the line Whirlpool dryer that cost me over $1,000. Havent had it for a month and it requires a service call. Have to wait two weeks for service! Totally unacceptable. The dryer is JUNK and now I am stuck with it. Horrible company. Bought from Home Depot.

Whirlpool electric range oven wont turn off. Used the oven 2 or so times per year.... Very unsafe, expecting internal breaker that would shut the thing down. Whirlpool Range/Oven PT3196685 happened on 6-10-2014, was baking cookies with timer on for 9 min. First batch turn out good, 2nd batch on fire before even get to 6 min, the burner is brightly hot and cant shut off from the panel... Saw ERR then COOL indicator... Tried but no respond from panel. The burner element wont turn off and temp keep rising white hot... The only way to shutoff is the house circuit breaker. But soon you turn on the breaker, the oven would turn on by itself and you cant switch it off. Where is the safety breaker on these range/oven when something goes beyond 500 degree..... UNSAFE PRODUCT. Ordered a new Whirlpool Gold 700 series but canceled after discovered others experienced similar situation with the new product. Could have burn down the house and worst when lives involved. WONDER IF ANYTHING WAS DONE TO CORRECT THESE SAFETY ISSUE.

I bought my refrigerator model #WRV986FDEM, in October. It has not made ice in over a month. I think its very unfair to purchase a product and not be able to use it. The technician has been out here twice and the situation is still not resolved. I understand that customer service is not a strong suit of your company but I am not a customer to be taken lightly. I paid almost three thousand dollars for this piece of junk and I want it to work properly. I find it unacceptable that the technician just left and the situation is not resolved. I will be posting my displeasure on every site I can today since I had to take yet another day off to accommodate you and your inferior product. ALL I WANT IS ICE from a fridge I bought 4 months ago. In the words of our illustrious president. Very, Very BAD.

I got a Whirlpool washer front loader model number wfw9151yw. Every time I wash sheets, they go into a ball. I called Whirlpool. They sent out a service guy. He said do not wash sheets in a front loader. I called the store. They said call Whirlpool again. Then the second service guy moved the legs down about 1 in. The machine still not right. I feel Whirlpool should replace the machine or give me my money back.

After having my Whirlpool side by side refrigerator ice maker replaced 4 TIMES in 10 years, I finally found a permanent fix for it: an Igloo counter top ice maker for around half the price of a replacement Whirlpool ice maker. Unlike the Whirlpool ice maker, it makes ice. I promptly removed the Whirlpool ice maker FOR THE LAST TIME, and sent it to the dump, where it belongs. Goodbye Whirlpool! If that is the best you can produce, you will not receive any more of my hard earned money!