Dishwasher (WDT710PAYM5) handle on the left side loosened within 2 weeks of purchase. Today the handle fell completely off. The dishwasher will be a year old in August of this year. I cannot figure out how to reattach the handle and there is nothing I can find in the owners manual to help me. There are only two of us and I am the one who uses the dishwasher. This should not have happened. Not real impressed with this machine.

I have a Whirlpool Cabrio WTW5640XW and I was able to get the belt back onto the pulley, about a month back and it ran, loudly, but it ran. Last week the belt popped off again and now the pulleys are screwed, so I probably won’t buy another motor (for the sake of the pulley). Ill get a front loaded Kenmore or something as I was never completely happy with how this thing washed and (didnt dry) our clothes.

We purchased a Whirlpool Cabrio washer and dryer less than 2 years ago. These are supposed to be high efficiency appliances, but the washer has never cleaned the clothes well and the dryer often has to be run more than once in order to get the clothes dry. Then, about two weeks ago, the washer started making such a loud noise on the spin cycle that it sounded like a jet plane taking off. It was hard to hear the television when it was running. Today, it started screeching and water leaked on the floor. I called the number listed on my manual and was basically told that it would cost half of what we had paid for the machine to fix it. What efficiency, a poor machine that lasts less than two years. We will never buy Whirlpool appliances again.

Love the chrome exterior and overall appearance of this side-by-side. The compartments and shelf spacing are well thought out & offer flexible adjustments. The outside components on the freezer (crushed ice, ice water, ice cubes, & light) I love, and most importantly the unit comes with a built-in replacement water filter.

I bought Whirlpool top-loading high-efficiency low-water washer Sept 2018, model WTW5000DW, Serial # C83444466. Worst washing machine ever! No matter which water level you choose, it will not dispense enough water to cover the top of the clothes load, therefore the clothes are just moved from side to side with only the bottom layer of clothes getting wet; top clothes stay dry. Not enough water to fully agitate to clean the clothes!Whirlpool serviceman came today (Jan 13, 2020) to recalibrate the settings. VERY NICE MAN BUT THERE WAS NOTHING HE COULD DO TO SOLVE THE LOW WATER LEVEL. Recalibrating settings did nothing to solve the problem of not enough water. I am 81 years old and I have to manually add at least 4 buckets of water to an average load of clothes. This is unacceptable. Wont someone please initiate a class action lawsuit against Whirlpool for selling this very obvious poorly designed machine? NEVER EVER BUY A WHIRLPOOL WASHING MACHINE. It is a waste of money.

Ive spent more repairing this washer than what I paid for it new!!! Its really ridiculous that Whirlpool isnt more responsible for their equipment that doesnt stand up to their name! Ive replaced more things than I want to type but just to start the computer board, pump, bearings just to name a few. Each time I had my repairman out it was a minimum of $300 to repair. Ive had my repairman out 5 times to repair things. Thinking each time its cheaper to fix it than buy another which I surely didnt think I would be repairing it several time! At this point Im just sick to death that a washer that is for a home of myself and my daughter has broken down so much. I cant imagine what a family would go through. Even after all the repairs it still isnt right but Im done sinking money into this sinking ship of a washer! Its loud constantly stops due to un level so I have to move the clothes around usually having to repeat this several times before I can get the load to finish!!! Then they come out wrinkled more than they went in and I have to iron clothes. A person should NOT need to iron! May as well wash them in the river on a rock. It would be easier!!! SO DISAPPOINTED!!!

I inherited this microwave when we bought our house and have been very happy with it. It does not take up much space, heats well and evenly and the beep at the end of the cycle is not as irritating as other microwaves I have owned. However, I do find the glass turntable difficult to get back on track after I take it out for cleaning. It will wobble if not put back exactly right.

Outstanding, however our location has a hard water rating and as such we have to use a deodorizer to balance this out. A wide range of variables which are a fit for my purposes. Interior dimensions and layout are more than perfect for my uses. This particular dishwasher is built in so blends aesthetically into the design of the kitchen seamlessly. The product has a drying system which successfully blows air over the top tray to eliminate wet areas within depressions of crockery, glass, and so forth, its excellent. There is also a light steam setting which removes tough deposits from surfaces.

We bought Whirlpool duet front loading washer and matching dryer. In 3 years the water level seemed like it was off. Clothes, especially towels were coming out stinky. Eventually you could hear the clothes were merely flopping around wet. Before we could order the repair part it completely quit and locked our clothes into it. I washed my clothes at my daughters house for a week and dried them at home. Within the week the dryer quit. Not having the money to repair both machines, my son gifted me a set of top loading washer/dryer. Again Whirlpool. In a week we had repair service out. They replaced everything possible and it still didnt work right. Since the 90 days from purchase was approaching we returned it to the store and they had Whirlpool send us a brand new dryer. This one worked for a month then stopped spinning. I havent called for service yet because now with 3 broken machines I am so disgusted. When I think about them I feel like I am going to puke. My washing machine shouldnt be the worst thing in my life, especially since it was a lovely gift from a wonderful son.

When I grew up, my mom and dad had a Whirlpool dishwasher and it was the ONLY dishwasher we EVER had. The SAME one, for over 20 years! So, with confidence, I purchased a mid-range unit. (over $600 2015). By 2016, ONE year later, I was already buying replacement parts because the top rack was falling apart and the bottom spinner broke as well. The parts were extremely expensive and hard to find. Now, a mere 4 years later, you cannot find ANY parts for this machine and there are so many issues with the unit. It is no longer functioning. When it did work it ran for 4 HOURS!! Even then, the dishes are filthy. I am so upset by whirlpool. I want a full refund from the company for treating their loyal customer so badly.

My side-by-side lasted 2 years 3 months. It stopped cooling. Lost all my food. Inconvenienced by waiting for repair service. Had to take a vacation day from work. This refrigerator replaced a 13 yr old GE and the one in my garage is 25+ years old and still going strong. No help from Whirlpool or Lowes. I will never own a Whirlpool anything ever again.

Updated on 04/15/2019: Called customer care about my ice maker which have went out for the second time less than two years and the 1st replacement have only been 9 months from today. Unfortunately they tell me it’s out of the one year warranty process and they can’t help me. Well look like the 2nd replacement should have been under warranty still. Their products are a piece of crap and they know it and don’t care because theyre making money off of the consumers. Be aware and advise you to stay away from Whirlpool appliances. They don’t stand behind their brand. There’s no way anyone should have to be making repairs on a new 2000 and sum refrigerator. My old one is 18 yrs old and still working fine no problems, better than this piece of crap. Warning to consumers. Don’t waste your time and especially your money. Didn’t want to give no stars but you have to give at least 1.Original Review: Purchased refrigerator In July of 2017 and had to have ice maker replaced less than a year of having it. Now again ice maker not working again and only been about 9 months from the last replacement. I think there should be a Lemon law on these products. These refrigerator are not cheap and if I buy something new and spend a good amount of money for, I don’t want any headache and worries. That’s the reason for getting a new one.

My fridge stainless steel doors rusted on after Whirlpool Customer Service told me to buy and use Affresh (a Whirlpool product) to clean them! The fridge was only 12 days old when this occurred, imagine my shock and disappointment. Whirlpool Customer Service reps then sent me another one of their products Whirlpool Stainless Steel Brightener with instructions to clean it every day for 3 weeks and it would resolve the rust problem. It didnt resolve the rust problem. 2 repairmen from different companies have looked at the doors and shook their heads that Whirlpools own Customer Service department recommended a product for a fridge that rusted it and then they take no responsibility for it! Whirlpool knows these stainless steel fridges have the potential to rust. Its listed in their manual. Unfortunately, buyers arent given a copy of that manual to peruse BEFORE they buy the product. I would never have purchased this Whirlpool fridge had I seen that! I have now since read of other Whirlpool stainless steel fridges rusting.

I had a full set of kitchen appliances delivered to me on December 11. The delivery crew installed everything but the microwave because we needed to have wiring done. Three days later an electrician came and upon opening the microwave box it was severely damaged. Whirlpool won’t replace it because I called one day outside their 48 hour window. They delivered me a damaged product – period. It should be replaced without question. Instead they want to send a “cosmetic tech” out to see if it can be fixed. I can’t imagine that’s a more cost-effective method for them. Completely unacceptable. I will never buy Whirlpool again based on their lack of customer service and common sense.

Our 27 cubic foot BLACK French Door refrigerator is freezing up again for the 4 or is it 5 time. We are now told they will give us a replacement and to go to the website and find what we want. The website lists DISCONTINUED fridges. Called their RUDE rep and found out only can get a Smaller, stainless steel ONLY refrigerator. So is that how they work, sell crappy refrigerators and then replace with a lesser refrigerator, which most likely will break down too. SHAME ON WHIRLPOOL. Or is it DEADPOOL. Your reputation is shot. We will NEVER purchase another piece of junk from you!!!

We moved into our new condo a few months ago and my wife noticed that the knobs and front of our new Whirlpool Stove were getting too hot to touch so we called Whirlpool and since then never used stove. Was over one year old, we had to call their factor service representative. The charge was $98 plus labor $90 to tell us that even though the surfaces were way too hot to touch and dangerous to touch they were still within the factory specs of 167 degrees for the knobs, 152 degrees for the drawer, and 172 degrees for the front glass. He found the front of the unit reached 152 degrees which was hot enough to cause a serious burn when the stove was only set to 400 degrees. Why would a company set specs that will cause serious injuries? If my wife or grandchildren get burned by this crappy stove Whirlpool will be hearing from my lawyer. Stay away from any Aquaclean Whirlpool stove.

Since May 3, 2016, five servicemen have failed to repair my Whirlpool refrigerator (WRF560SEYM), which is less than 2 yrs old. One trainee from A&E Factory Service had the nerve to reinstall broken parts. I have been completely without refrigeration for the past 48 hrs only to learn that the repairman scheduled for tomorrow has been cancelled because AIG warranty has not approved his visit. Further investigation reveals that the parts were never ordered, pending approval from AIG. Whirlpool cant help me because AIG has not declared the appliance unfixable. Hhgregg cannot help. I have spent countless hours on the phone on hold & wasted hundreds of dollars on spoiled food. Dont trust Whirlpool. Theyre not the company they once were. Their warranties arent worth the paper theyre printed on. Buyer beware!

I wish to file a complaint regarding a Whirlpool flattop electric range that we purchased approximately eight years ago. After the first year, a residue began to build up behind the glass on the front of the oven door. Finally, about 18 months ago, I decided to try to unscrew the back of the door in order to clean this since it got increasingly worse year by year. When I unscrewed the door, the side metal bars broke off and the range is to say the least, looked very unappealing . When the oven self cleans it makes the outside of the oven brown and very unappealing.This is a Whirlpool Gold, Super Capacity 465 range. We have been dissatisfied from the beginning. This complaint is not about the retailer, it is about the Whirlpool product. Please help as I am quite dissatisfied with this Whirlpool product at this time.

I had a kitchen fire in 1999. All appliances were replaced with Stainless Steel Whirlpool. My old fridge was an 18 y.o. Whirlpool and still works fine in the garage. My old above range microwave was 12 y.o. and worked fine, I should have kept it. I had to replace my new Whirlpool Microwave after 4 years and 4 repairs. (Main Power Diode kept failing). Now my Whirlpool Gold fridge is not defrosting, even the freezer light switch is frozen. This French door freezer also seems to have less capacity than my old upright freezer. The retailer seemed sympathetic and pathetic. They would not budge on repairs. I told the contractor that did the rehab on my house what happened, he said he would stay away from Whirlpool and that retailer.

I purchased a Whirlpool Washer/Dryer set in June 2014. Yesterday, Sept 9, the motor stopped working. The machine was on but nothing happened. Called the repairman who said the motor burned out and had to be replaced at a cost of $180 plus $75 for his labor. I paid around $400 for it a little over a year ago and now I have to pay $255 to get it repaired which is ridiculous for a ONE YEAR OLD machine. I will never buy Whirlpool again. I should have read the reviews first before buying but I always thought this was a good brand. Lesson learned, never buy Whirlpool.

When I bought my new retirement home, a Whirlpool dishwasher Model No. DU1055XTVS1 had been installed. After only three years of use, the dishwasher would not complete a cycle except to drain and cancel. The repairman replaced a computer board and when the parts cost and the service cost were combined, they amounted to about half the cost of the dishwasher. I have a PC that is twice the age of the dishwasher and it is still running.

I purchased this Whirlpool Cabrio Platinum washer on 12/1/12. I started getting an F1 fault and all the lights on the machine light up like a Christmas tree during cycles now. I thought I would research Google to see if others were having the same problem. I was VERY disappointed to see all of the same issues others were having with this high end washer. Without even calling a repairman, I know that this motherboard fix is $400+ based on all of the negative feedback. We have a large Whirlpool plant in my hometown, and I hate to see the lack of resolve by Whirlpool.

We purchased a new Whirlpool Cabrio washer, model #WTW6340WW0, and dryer unit 2 1/2 years ago. We did our research online; Consumer Reports got great reviews everywhere. We went to Lowes and was told that this set (washer/dryer) was the top of the line in top load washers, so we purchased it. Now 2 1/2 years later, our washer is out of service, bad power board is the suspect and maybe the pump. I have heard that there may be a class action lawsuit coming down the pipe against Whirlpool and would like to know more info if it is. We paid nearly $1,000.00 for the washer and like other complaints, we were led to believe that we would get 10-14 years service out of the unit. But that did not happen. I think Whirlpool, Consumer Reports and Lowes should all be held accountable for misrepresentation. I can assure you that all of their executives received attractive bonuses for misleading the consumer. I would not recommend Whirlpool to anyone, Consumer Reports nor Lowes.

Where do I begin! LEAKS on floor! Gets stuck on cycles! Doesnt empty the fabric softener! Clothes are still dirty! The clothes come out soaked (not drained) of my favorite not wet at all! This washer was the worse purchase ever. I threw money away!

Quiet Partner II - Our dishwasher racks started to crack and rust very quickly, about two years after purchase. We repaired the racks and tines, but the rust got worse. We replaced our dishwasher today with another brand. Many of the tines on the drying rack had rusted and broken off. We have been told to only purchase Nylon racks. I hope this is good advice. I must admit I had no trouble with the machine as far as cleaning my dishes. I just felt the racks should last longer than two years. Cost to replace racks was about the same as replacing the whole machine.

I have a Whirlpool suite. Stove is fine...refrigerator is awful. Froze all the food in fridge. Cost me 100’s to replace. Put in new thermostat. Now sounds like a freight train. Bought in April and the filter already needs to be replaced to the tune of $81.

Such an expensive refrigerator but poor quality. Bought at Home Depot back in November of 2019. The bottom Freezer freezes up messing up everything only three months after purchase. I wouldn’t recommend it at all to anyone.

I have had my refrigerator for eight years. Only had one prior repair which cost me $85. I have had a wonderful experience with this particular product. I am pleased with the liability and hope to replace with an equal or better appliance.

This is a freezer on top unit. Purchased in 2015, unit quit cooling, started making a roaring noise. Called local technician, he added 2 oz of Freon, said he has seen many of these same unit losing Freon. Technician said line that goes to compressor is copper and hooks up to aluminum line before attaching to compressor. This is leak point for freon; no way to know when the leak started, but freon almost gone and cost to pressure check for source of leak is costly and probably would not repair problem. Got 6 yrs out of it and I am replacing with another brand. Will never buy Whirlpool again. Should have got 10-12 yrs of use. Do not buy this unit. Wrote Whirlpool first, but no help. Indicated this could be a problem with these units but no recall so I am on my own. Out $900 for a new refrigerator. Big hassle. Unit no good.

I have had the machine pair (Whirlpool Cabrio Platinum) for almost 4 years and up until a few months ago I LOVED the washer. I was advised when I bought the machine to make sure to read the manual, which was very helpful in learning to use it properly. I have never had residue on my dark clothing or ever had the clothes come out partially dry. I use liquid HE detergent nothing powder goes in the machine. I also read many reviews before buying it and a got some advice from them. I have washed king size comforters with no problems. Everything has always cleaned very well. The only issues I have are that when bleach was used in a previous cycle. Ive had a problem with the bleach not being fully dispensed and ending up in the next load. Fortunately it was just towels and not darks!!! Although, I had just bought the towels and now they look tie died which was very upsetting to me. I learned to add water to the bleach dispenser to dilute it and that issue seemed to dissipate. BUT NOW... I COULD THROW A TANTRUM. I PAID 1800+ FOR THE PAIR AND THE WASHER IS SHOT!!! A pretty common problem with the Cabrio from what Ive read. It started by making a very loud noise when spinning, like a helicopter was landing in my laundry room! I continued using it, I even thought the sound was getting better after I did the clean cycle. The last load I did would not complete the cycle because it kept reading that it was unbalanced and unfortunately it was a load of heavy wet towels. I was far from happy when I had to remove them and go to a Laundromat. Needless to say its the bearings and to fix its very costly. I cant even fathom that a less than 4 year old machine needs to be repaired and the cost is roughly half of what I paid for it!!! I do know I will NEVER buy another Whirlpool. What happened to making things to last??? Next machine I will definitely get extended warranty. I can honestly agree with all the other reviews... THIS MACHINE IS HORRIBLE!!!

I hope this review makes it to the president of Whirlpool! My husband and I built our first home and finally moved into it on April 22, 2017. We saved everywhere we could and I did my best to research my appliances. I was so excited to buy a BIG refrigerator for our family of five, (3 are hungry teenagers!) after years of using a smaller side-by-side. We went with the 31.5-cu ft French door/drawer with dual icemakers, model #WRF993FIFM. The original price was $3,599 but we got it on sale for $2,298 at Home Depot. After only 5 months it stopped cooling! I woke up one morning to find a fridge full of spoiled food!! After waiting 3 weeks I had 2 different repairmen come out and have been told that it is un-repairable due to two parts that are needed, one of which is on back order indefinitely. Ive called Whirlpool numerous times and only get the run around and Im sorry mam we cant do anything else. So Im just supposed to be without my refrigerator until who knows when?! The first 2 weeks of this crap we had to live out of Igloo coolers on our back porch. That meant no buying real groceries, only milk and juice and drinks. Thankfully the awesome people at Home Depot brought us a loaner, which is an apartment size fridge, to use while we wait. So now I just have to walk across the house to my garage every time I need something, and I cant buy much food because it wont fit!! Im so disgusted with how Whirlpool is handling this!!! Not only did we buy our fridge but we also went with Whirlpool for our stove, dishwasher and microwave, and we already owned a newer Whirlpool washer and dryer set. We spent thousands of dollars and cant even get them to exchange this piece of junk! Come on Whirlpool, surely you dont treat all your customers this way!? Do the right thing and let us have a replacement!!!

Whirlpool contacted me today about a review I posted on their website about the washing machine I purchased from one of their distributors. It was not to say they were sorry for the washing machine ruining our floor or our clothing. It was to say that they will not post my review because the model number is not the same as the one I purchased. Unfortunately for me my model was manufacture discontinued and although they look alike this new model is significantly different than the previous model it replaced (I will believe that when I see it). So they obviously knew there were problems with the earlier machine. I am outraged that whirlpool would stoop to such low business tactics to sell their garbage to people and then treat them like dirt.

I bought a Whirlpool washer (model wtw57esvw1) about 17 months ago. In that time, the same part has gone out three times. It happens every 5 to 6 months. The part runs 97 dollars plus labor. In the mean time, I am without the use of my washer. They say they are sorry, but they only cover their product for one year. After that, you have to buy their extended warranty so you can get it fixed by them. I feel that if I pay that much for a product I should expect at least 3 years without having to repair every 6 months! I have no washer. I am giving one star only because I have to.

I’ve had my Whirlpool Duet for 12 years and it has been a great one. I’m a mom of three sons, all of them wash their own laundry!! Lots of loads are done weekly and it cleans well! We leave the door opened after it’s unloaded so the tub will dry. Every few months, I put a tab in it so it will clean out all of the buildup. I don’t get the “front loader smell” that way.

Purchased a Cabrio large capacity washer. It NEVER seemed to get the clothes clean enough, and after the sensors and bearings went bad within three years (out of warranty of course) I gladly kicked it to the curb. I bought a Samsung that has been great. Id like to support USA made, but not when it is AWFUL.

Even the repairman said Whirlpool isnt making them like they used to even though they are charging more for newer appliances. The freezer has clogged, ice maker already broken, have to replace $400.00 for just the icemaker. As a real estate agent, I will make sure and let our new home buyers never to purchase Whirlpool again!

Purchased this refrigerator in 7/2017. I cant stand it. Its pretty and works, but the NOISE!! I bought a white noise machine and placed it on the countertop next to the refrigerator just to drown out the noise (very high pitched sound). Repairmen came out twice. A part was replaced, but nothing changed. Said have to live with it. Dont buy Whirlpool or youll go crazy listening to this all day, especially with an open concept home. You can hear it everywhere!

When received there was a black dot on freezer door. It was replaced. Door handle on doors did not line up. Tried to tell repairman and he wouldn’t listen until the third handle on the refrigerator was replaced. Plastic handle broke three times when under warranty. Now freezer handle has broken! Plastic where screws attach handle is stupid. I’m extremely disappointed in product.

Second time in 3 years our freezer/fridge has gone out. Same symptoms as last time, which was a bad motor. Repaired BY WHIRLPOOL. Completely useless. I don’t expect to have to replace a refrigerator every three years. Especially when I paid $$$$ for it to begin with. DO NOT BUY!! We will be switching brands. And as the installed items in our house start to go (yeah, they’ve already had to service an oven installed at the same time 3 years ago too) they too will be replaced with other brands. You’ve lost a lifetime customer! Shame on you Whirlpool.

I am writing due to the defects and flaws in my recently purchased appliances. I chose Whirlpool believing I was buying the highest quality for longevity purposes. Every appliance I own is Whirlpool or Maytag - same company. I purchased warranties and was told the warranties dont cover my issues and was basically brushed off. I am infuriated. Here is a list of complaints. Refrigerator is cracking on the inside on the inner door and at the bottom. These cracks surfaced within the first year of purchase. The warranty does not cover cracks in the inner body.The oven/range has an exhaust that bellows out of the top of the range in a way that the smoke curls up onto the panel and discolors it. I have never had an oven constructed with an exhaust pipe in the front that pours smoke onto the range itself and into your house. The dishwasher paint has rusted off on the door as have the screws on the inside of the door. The cover panel on the cleaning dispenser of the washer has popped off and cannot be popped back on, hence the guts of the dispenser are always visible and when I go to load the cleansers the front has to pulled out from inside the dispense.The refrigerator is also leaking from the bottom and the ice-maker no longer produces ice. This started off and on for the past 2 years. At first I thought the leak was from a near by window. No it is the refrigerator. All of these appliances were purchased in 2013, 14 and 15. New. I am 56. I have never had issues like this ever in my life growing up or as an adult. Appliances lasted forever. I am one person. How much damage could I do? None.These are flaws in chemical compounding of the paints and materials for cracks and rust. Whirlpool was called various times and was not interested in sending a rep to verify my claims. They said all of my warranties did not cover such issues only motors. Lots of many spent in vain. I will not purchase Whirlpool again as they seem disinterested in customer satisfaction.

My double oven is less than 2 years old. I just used the self-cleaning feature on the bottom oven and now it wont work at all. I understand that this is a common problem with Whirlpool ovens and I will never buy another Whirlpool appliance again. What a piece of junk! I have used self-cleaning on my ovens ever since they were invented and have never had a problem before.

I purchased the Whirlpool washer and dryer three years ago and I absolutely wish that I hadnt. After three years of use, the bearings on the tub are shot. I need to replace them but it will cost $400.00 to repair. This is the second time that this machine is for repair. I am going to dispose this machine and purchase a new model other than Whirlpool. The overall performance is poor and not as advertised. It does not use enough water and does not wash clothes well enough. At times, you can see that the water never reached parts of the garments. I am totally disappointed in its value and quality.

Cabrio Washer - Absolutely the worst thing I have ever bought... everyone told me to stay away from this brand. Bought in 2011... large tub... nothing but problems. My last washer was great... full tub with water, could soak or pre-wash. This one does nothing except create some kind of lint all over my clothes no matter what setting... I dont care about water usage (mine is free) but I do care it takes 50 mins to do a load where my other was exactly 20 mins (and it lasted me over 30 yrs!). This really sucks. I have seen other complaints but never a recall!!! NEVER EVER AGAIN!

Whirlpool Calibri washing machine - I have the washer for 4 years and have replaced four computer boards to the tune of nearly $300 each. When Whirlpool was told of my experience, they said they were sorry. Obviously, I am too and will not buy again. You would think they would give me one board at no cost, but I guess words are cheap.

Whirlpool refrigerator are garbage, and their customer service is worse. I will never buy their products again. My refrigerator never worked correctly and destroy all of my food soon after it being delivered.

Purchased a new range from Lowes in November. It was delivered in January. Was told upon purchase that there was a one year warranty on the item. After using the item approximately three times, a piece of aluminum foil fell to bottom. It stuck to the bottom and removed some of the porcelain. Bacon grease had spilled into the middle of the oven which caused the oven to warp and also discolor the porcelain. They sent a tech out, who called Whirlpool. Whirlpool told them that it was cosmetic damage and only had a 30-day warranty! They also said I had to contact customer service again, which I did. Customer service said that the tech didnt do what he was told to do and that they would send someone out again. The same tech came out, called Whirlpool again, and was told there is nothing that can be done. I asked to speak to a supervisor because I was unsatisfied with this response. A two-month old oven shouldnt look like it is five years old. I never spoke to a supervisor. The rep just kept telling me that there was a 30-day warranty and that it was stated in my manual. After insisting that I speak with a supervisor, she placed me on hold. After a few minutes came back stating that she is sending my request to another department and that they will call me back in three to four days with their decision. I would not purchase another Whirlpool appliance even if they decide to replace this one, which I sincerely doubt that they will. VERY POOR CUSTOMER SERVICE!

Brought brand new. Had for ten years. Still going strong. Matter of fact all appliances are Whirlpool. Dishwasher, stove top, oven. I like the sharp clean look in my kitchen. Easy to clean!!

I have a Whirlpool dryer for about 8 years. The lint catcher has some holes so I called the 1800 phone no. that I got from the dryer and order the part. That happened in May 18 - I pay for it. I have been told that I will receive the part in 5-7 days. Today, Aug. 27, I called see what really happen with my part. Well I have been transferred from a department to another. I waited over an hour on the phone. No employee can find my order in the system and hey keep on telling me that I did not order! In the end, the order have been found. They told me that the part has been in the back order and I will receive it on 9/12/2014 - 3 weeks away adding up to 4 mo since I order and my credit card was charged. I cancelled the order> I really do not want to deal with Whirlpool ever again. I am happy to pay for a new dryer - some other brand and put in the garbage the Whirlpool - for a lint catcher and bad customer service.

I called and emailed Whirlpool because the water dispenser drips all over the front of the fridge and floor. They had the nerve to tell me to use a cup for the problem and there was nothing they could do. They were no help with this problem.

Whirlpool Dishwasher is 5 years old. Used in a one-person household where dishes are washed approx.. every four days (rinsed before placing in d/washer.) Recently at completion of cycle, 2 of water remained on the bottom (still there.) Whirlpool told me it sounds like I need a new pump, the cost of which would be approx. $300 (tech visit and evaluation, parts and labor.) I understand appliances dont last forever but I expected more than five years.

I purchased a new water heater in August 2013. The pilot light started going out in October/November of 2013. After calling the Tech Support phone number, (877) 817-6750, I was advised to clean the burner screen. First this is very difficult to do because the burner screen is underneath the water heater and almost impossible to access. Second the closet the water heater is in did not show any signs of debris that could clog the burner screen. I did as they recommended. Several calls, and several weeks later, they finally authorized a technician to come and service water heater. He performed a cleaning even though he couldnt find anything to clean; and he replaced the control module. The new control module worked through the spring and summer seasons and then I started having issues again in the fall, late October. Started calling the same phone number and was told again to clean the burner screen. I convinced them to send out the technician again. The A and E Factory technician came out and only cleaned the burner screen and left before I had a chance to get home. This happened several times and I called Whirlpool every time. The next A and E technician told me to try changing out the draft vent chimney to a different size, which I did. Problem happened Again! I finally asked for another plumber and they sent me 3 names of their authorized plumbers. I called Phil, Philco Plumbing. He told me that I needed to have more ventilation, so I added more ventilation, even though I later found documentation stating I already had more than what was required by the manufacturer. Again, a week later, started having problems. Call back and asked to have my personal plumber come out. This time the rep told me that I have always been free to choose any plumber I wish (why wasnt I given that option the first 10 times I called?). My plumber came out and replaced the control module and the thermocouple, but wasnt convinced that these were faulty parts, he honestly couldnt figure out why I am having this problem, but it was worth a try. That lasted about 1 week and now I am having the problem again!!Whirlpool will FINALLY authorize a new water heater, but they will not authorize installation for the new water heater. I have already spent money on recommended repairs that have not worked. I have taken 15+ hours off of work to watch plumbers do nothing that has rectified my problems. And now Whirlpool wants me to deal with installing the unit myself, OR pay to have it installed! They say they wont cover installation because I purchased it more than 1 year ago. They seem to be missing the fact that I have had trouble with it the ENTIRE time I have owned it!This Flame lock system is garbage. I found on Consumer Affairs that a few years ago a class-action lawsuit settled, dealing with the same issues. I think it is time for another round! I KNOW that I am not the only one dealing with this problem because the plumbers I had out all had similar complaints from many of their clients. Whirlpool wont fess up to the problem, but the problem is real.

I bought my refrigerator model WRS49/WR151 from Courts our local appliance store in November. The side panels of the fridges gets extremely hot which make me think it can set on fire at anytime. When I contacted the store two days after purchase they made it seem as though it is something normal. I never had a refrigerator that got extremely hot that I can scramble some eggs on it. Thats why I cant even rate my experience.

I had one of the first Maytag Neptunes. Loved it to pieces but finally had a problem and my beloved repair guy said it was almost 20 years old so to give up and move on. Obviously, cant be without a washer for very long so grabbed this Whirlpool Cabrio Platinum Washer. One of the biggest disappointments ever! Clothes come out streaked and splotched, dont smell very fresh or clean even straight after having been washed, stains dont come out even with pre-treating, have to run everything on heavy duty, whites are getting grayer by the week, and all-around horrid performance.Im ready to give up my Starbucks, start packing my lunches for a couple months, skip whatever treats I have to in order to get back to a quality machine that can actually WASH CLOTHES. I wondered exactly what it was or wasnt doing so I stood over it for half an hour. Initially, it loads up about a gallon of water and then spits it out over the rotating drum of clothes. Then it stops and spins that water out. I suspect the design logic was that it would force that gallon of water thru the clothes taking some dirt out with it. It repeats that stupid process several times. Then it finally gets a few inches of water in the bottom and the vestigial agitator tries to move it around.I watched one hand towel lie on top like a dead weasel, never getting pulled down or pushed out or whatever it was supposed to do to get down among the other items and squish together. Life throws me everything from sick kids spewing body fluids to people coming home reeking of hydraulic and other industrial fluids. When I say clean I mean CLEAN. This piece of junk couldnt satisfactorily process half a dozen dust rags. Neptune, Im coming back with my hat in my hand and a whole new appreciation!

Whirlpool Cabria Washing Machine hold down switched failed in just 18 months of use. It took the Technician 5 days to serviced and repair our Whirlpool top loading washing machine. The washer is till acting up and stop working unless you put a weight on the top loader cover.

I have a 3 1/2 year old 9400WFW WP washer with a 70 error code. After viewing complaints on various websites, it appears this is a large scale problem with Whirlpool Duet owners. I just got off the phone with WP customer service and explained how many complaints are out there for F70 code error, yet they do not have a recall on this part!How can this be justified? This is a non-mechanical part of the washing machine. The life expectancy should be more than 3 years.My washer is not overused as there are only 2 people in the household. I do not want to pay the cost to repair this. I think WP should issue a part recall on this model. Does anyone know how to find out how many replacement CCU or CPUs have been purchased in relation to the number of 9400 WFW sold or if there may be a chance that WP needs to reconsider a recall?

This is a good looking, inexpensive stove/oven. Stove top has four burners. I liked the split grates on the stove top. Its easier to remove and clean. I do not like the rubber seal on the oven door. I am used to the heavier duty seals on most oven doors.

Purchased washer Aug 2012 and has increasingly been leaving white residue after wash cycles. Have used the Extra Rinse function to no avail and use half the recommended amount of HE Tide. Now I have to run the Rinse, Drain, Spin function twice with darks to remove the residue. I have also been doing the monthly maintenance which has not helped at all. This machine seriously detracts from the Whirlpool name and if they are unwilling to fix the problem, it only publicly displays the companys integrity.

Weve had this washer for about 9 months now. We noticed that the loads being washed small or large werent coming out clean. When wash cycle finished items were covered in soap residue and or had large dry spots where water had never touched the area. When our sheets were washed in bulky/sheet cycle and deep water this happened. Maytag sent out repair person to find the water pump went bad, pump was replaced. After repair same bad washing results as stated previously. Maytag then sent out repair person for the second time. This time the main electrical board was replaced. Still after two repairs wash loads are still coming out dirty, soapy, dry in spots in any of the selected wash cycles large or small. Third call to Maytag and a third scheduled repair date coming up in a few day. Over the phone the Maytag employee only words of wisdom was, Did you buy the extended warranty. So unless there is a third failure I believe that this washer is just a poor design.

I purchased a Whirlpool WTW6600SW in January 2010. I dont normally purchase an extended warranty, but it was a fairly expensive washer. So I did. In July 2011, water starts gushing all over the floor. After my first visit to see what is wrong, I ordered a part. I was out of a washer for 2 weeks. Then in August 2012 the same thing happened. This time the repairman didnt get the part on properly, so they had to come back a third time. I am out of a washer for about 3 weeks. Now, October 2012, it is doing the same thing again! Customer service tells me it has to be repaired for the same problem four times in the same 12 months in order to receive any replacement value. It will have to break two more times! This washer is a piece of junk!

We ordered the Whirlpool 6.4 CuFt Electric Slide-in Range WEE745HOFS from Costco on 1/3/2017. It was delivered 2 weeks later. The FIRST time we turned on the oven the top heating element caught fire during the preheat and damaged the interior of the oven! The interior paint was completely burned off above the fire, exposing the raw metal. Costco called Whirlpool for us to ask for a replacement oven. Whirlpool refused. We called too. Whirlpool sent out a repairman who replaced the element and PAINTED the damage on the top of the interior.For weeks, every time we turned on the oven, the house filled with smokey paint fumes. I have a chronic lung disease (sarcoidosis) so the paint fumes were a serious problem. We stopped using the oven. Weve hardly used the oven since that time because we have a nice, large countertop oven. I turned on the Whirlpool oven again in January of 2018. The top element burned out AGAIN after less than a dozen uses! I was 2-3 days past the purchase date and again Costco tried to advocate for us but Whirlpool refused to help in any way.My next door neighbor purchased this exact oven two months before we did and she has had the SAME problems (and worse!) with NO help from Whirlpool! I have HATED this oven even though we mostly use the cooktop. A $1300 oven should NOT burn up an element in less than a dozen uses! The cooktop is very difficult to clean, scratches and stains easily. The trim and panel also scratch very easily. Yes, I did purchase the Whirlpool cleaning kit and follow all directions carefully. My next door neighbor says dont bother trying the Whirlpool Aqualift cleaning feature because it DOESNT WORK! She hates this oven too. By the way, ALL of my appliances are new Whirlpool appliances! So far the dishwasher is doing ok but the microwave is 4 months old and the door is not closing completely, so it has to be adjusted often or it clicks rather than cooking. VERY DISAPPOINTED IN WHIRLPOOL!

We purchased a Whirlpool french door refrigerator 10 months ago. We have had issues with it freezing up and not cool or making Ice. In 10 months we have had repair work done on the same issue 3 different times. This refrigerator has been discontinue at the time of my purchase because whirlpool was aware of all the issues from what the repair people have told me. Shame on me for not researching this refrigerator. Customer service was no help. All they kept saying is that they will keep repairing it under the warranty. DONT buy a whirlpool. Stay far away from this company and anything they make. They do not stand behind the products.

2 yrs after my landlord installed WHM31017AW1... Whirlpool oven stove microwave. The door cracked then another crack and pieces from door fell on stove. I removed all loose pieces then glued all cracks & loose pieces on door. Landlord thought door was being closed too hard, silly. After all reviews same, not buying replacement door but having different brand installed.

We purchased our home brand new in June 2010 and with it came all Whirlpool appliances. We started having cosmetic problems with our over the counter microwave about 2 years later (model WMH2175XVS-2). The plastic casing around the door handle started to crack on the top and the bottom and now both pieces are completely gone as they fell off. The handle is still attached and the microwave is usable; however, it looks shoddy. To replace it, we were told by a Whirlpool authorized repair person that you would have to replace the whole door at a cost of $300 or more if you include labor. I am disappointed that this happened and that we cant get it repaired. It makes me think again about purchasing more Whirlpool appliances.

I purchased a Whirlpool duet front load washer 1/2013 new from Lowes. In 5 yrs it is my 2nd washer of Whirlpool. After 2 1/2 yrs, the bearings have gone out, also every time I run the cleaning cycle, water leaks out under the washer. My boyfriend looked the parts to fix the washer, since I called Lowes concerning the warranty and its out. Cost to repair, just in parts would be around $400, I paid a lot of money for a product to last only 2 1/2 yrs. Such a lack of quality in workmanship. With these price, there should be better quality. Do not purchase a whirlpool. 2 washers for them in 5 yrs is not a great track record.

This is not a new washer (Whirlpool Cabrio INTW6200VWO) and it works well BUT since we have owned it we have had rust at the bleach dispenser. I am seeing on the internet there are many complaints about this and there was a recall? But they have run out of replacement parts??? Never received any recall notice. We have online instructions on how to repair and have done this many times and the rust comes back. About a week ago we sanded, primed and enamel painted the area plus I have put NO BLEACH in the dispenser and the rust is coming back. I hate to replace a working machine but this rust can and will get on my clothing. Whirlpool was the absolutely best in the past but this one is a lemon.

I bought a Whirlpool fridge in June of 2014 and the plastic part of the stainless steel handle that attaches it to the fridge broke about a month or so later. After replacing the fridge because the company said they no longer made the part they gave me a new fridge and with that one the door would not close without leaving a gap of about 1/3rd of an inch open at the hinge side. They took that fridge back and sent me a new fridge. A week later I got in the mail a handle for the first fridge which I no longer had. About a week after that I noticed that the latest and third fridges handle had a crack in the same place. Whirlpool sent me 5 replacement parts and they were all defective with the same crack visible in the replacements. Finally I got a replacement handle that looked good and it broke today, Feb 6th 2016, in the same place as the first one. I should mention that each time the company replaced the fridge it was with a different and better model and each with a slightly different handle. There are other design flaws with the fridge. The door is in a corner and there are cabinets on the wall so the door can only open slightly more than 90 degrees which makes it impossible to open the crisper drawer enough to get a cabbage in it and if I want to clean the crisper drawer I must move and turn the fridge in the kitchen. Also if the crisper drawer is not closed completely it causes the guard rail on the bottom door shelf to fly off sending everything on the bottom shelf to fall to the floor. Fun when some are made of glass and filled with liquid. You would think I would have learned my lesson about this company but no! I went to Lowes and bought a Whirlpool dishwasher and when I saw that the automatic door would not open enough to dispense the soap, powder or packet I called a certified Whirlpool repairman who told me after receiving a duplicate that of course would not work either, that there was no solution to the problem and I went back to Lowes and bought a Samsung and my problems were solved. I WILL NEVER BUY ANOTHER Whirlpool or as I now call it, Whirledpoo, product, EVER.

Let me just start by saying I have multiple Whirlpool appliances, and I have always bought Whirlpool appliances in the past. I bought a refrigerator 3 months ago, and it quit working. So, I called Whirlpool to come service it. The service repairman said someone left the freezer door open and it froze up. Two days later, I had to call them back again, because now, the fridge part was not keeping food cold. He came back out and told me it was the compressor. I then in return called Whirlpool that afternoon, and they refused to replace it saying they had to follow their Warranty Policy and they would call me back on Wednesday. They did call back on Wednesday and told me they had located the part. I got a call on Tuesday of the following week and was informed they could not locate the part. I called Whirlpool the next day, and they told me they would have to send it to their Exchange department for review and I would hear back from them in 3 business days. I asked for them to rush my request, but they told they have no way of doing that. I will never buy a Whirlpool product again!

Whirlpool gas range convection oven - I have only had this range for 2 weeks. Manual is sketchy to say the least. Purchased from LOWES - salesman were not well-informed. I have had to do a chat to find out information. Range looks great but performs poorly. Takes a while to heat anything even on high and on large burners. Grates are too heavy. I am sorry I did not see the editor review before I purchased. I have not used the convection so I cannot speak to this but my choices were limited when I purchased and I did not want a convection oven and other ranges would not purposeful for my use.

Purchased the Whirlpool DU915 in 2004. Its been 16 years and I havent made a single repair. A lot of that is just proper use, i.e. scraping off food stuff, using correct soap, etc. I have other newer Whirlpool dishwashers at rental properties which have required repair due to misuse. I would recommend Whirlpool products to friends and family.

I purchased a rental home with a Whirlpool hot water heater. In the home inspection, it was deemed to be in good working order. The first day the tenant moved in, I received 3 service calls for no hot water. My contractor told me I needed to replace the start up assembly and it needed to be ordered from Whirlpool directly, as it is not available in stores. When I contacted Whirlpool Customer Service, the operator, Stacey, was rude and unhelpful. She told me that the warranty was void because I was not the original owner, even though it does not state that the warranty is not transferable. She also told me she could not help me order a replacement part without the item number.

Whirlpool Dishwasher Quiet Partner III Model #8575637, White - Purchased in 2006. As of July 2013, I can say this is the worst dishwasher we have ever owned. After normal use (once a day or less), the plastic on the front control panel began cracking in the first year, and the button covers have fallen off completely. Dishes were never completely clean (at least not as clean as other dishwashers). Dishwasher leaked out one side and needed repairs. Now it is in need of a new valve, because no water is coming into the inner cavity. Repairman says it is likely that the control board, which is getting moisture into it after losing buttons, etc., will probably need to be replaced soon as well. $300 more to spend on a repair bill. SAD (AND DANGEROUS!) THAT SO MANY APPLIANCES ARE ADDING UP IN OUR LANDFILLS. There should be a LAW requiring appliances to last a certain number of years, and to clearly state their expected life on the appliance when you purchase it. Planned Obsolescence is a common business plan these days, but there must be some control on what is allowed! (I may go ahead and repair this model just because I feel bad adding one more piece of junk to our collective global pile! Sheesh!!) And all those energy star, were so green advertisements? Well, if its soon to be sitting in a landfill, its NOT so green! I am willing to pay more to purchase appliances that will last a number of years, not need many repairs, and function as they advertise... Thank goodness I kept our very first Whirlpool refrigerator - never needing any repairs and still running like a tank out in the garage. (So I know Whirlpool, at least at one time, was able to build a quality product!)

March 18, 2018. I was called today to inform me that the right front burner on my new stove Model # WEG745H0FS0 (ordered in early September and not delivered until mid-October from Menards) was not operating properly. The flame was noisy and yellow. I inspected it and found that the front burner base was substantially damaged by heat. See photo (Whirlpool stove part damage1). On inspection of the other front burner base, I discovered early signs of the same problem. (Note changes on burner base on the left of the photo.)In this photo (Whirlpool stove part damage2.JPG), you can see the damage to the burner base and also see some changes on the 3 to 5 O’clock position on the burner base on the left of the photo. This stove is less than 6 months old. The fact that the burner parts can be melted indicate poor design and danger to the owner/operator of the stove. Further, the operators manual for the stove I bought does not include any information on the model I have. It has pictures of the range top similar to mine but the model number is completely different. In addition to this, the Aqua-Lift Technology for cleaning the oven is completely ineffective. This is noted in several other reviews of this equipment. The problem noted by the other review became obvious the very first day I tried to use this range. A 2 cup pot spilled all over the cooktop as soon as I put it on the grate.

Purchased a Side By Side refrigerator just 16 months back and this is the Third time the ice maker has failed. Who makes JUNK like this?? Is there not One company that can make anything to last at least three years. I am disgusted with the junk we bought that has Whirlpool on it. I should Sue Home Depot and Whirlpool for Fraud.

Today I had the unfortunate experience to have to deal with Whirlpool customer service and claims. I WILL NEVER BUY ANOTHER WHIRLPOOL PRODUCT again! My refrigerator, that was purchased in 2013, has a door misalignment problem. It is a known problem with Whirlpool (service pointer W107317828). My refrigerator serial number and model number are affected. Because I am outside the one year warranty, Whirlpool refuses to provide service that is required to fix this known issue with my model/serial number. After having to talk to four supervisors the only resolution that was given was that they would cover the cost of the 7/16 hex nut ($4.33). Dont get me wrong I do appreciate the offer.The two supervisors that were below her assured me that no one can do anything to assist me further. The attitude of the second and third supervisor was pathetic. After over a hour on the phone I was so disappointed that I could not take it further. The cost that we are talking about that I am asking them to pay is $154.28. I am very disappointed. They say they stand by their product. To me standing by your product means that you will fix or replace any known issue. $154.28. I hope it is worth it to you Whirlpool. You lost a long time customer.

I opened the door of my Whirlpool oven purchased last year and pulled out the rack to remove my food and the rack completely tilted towards me causing the food to fly out of the pan into the oven bed with juice and barbecue sauce falling between the storage bin and the floor. This could have easily poured out on me. The rack support is not strong enough to support the weight of the food pan.

We purchased a Whirlpool Cabrio Washer and Dryer in 2007. The washer sounded like it was going to take off and started leaking water. Two repair techs later, we found out it was the center bearing. They actually laughed and said they saw it all the time. It could be replaced (you need to replace the whole drum) for $300-$500, but I was told it would never be the same. I spoke with Whirlpool numerous times and they said they would do nothing, and I should have purchased the extended warranty. All I ask is for a company to stand behind their product. Im very disappointed.

The repairman said the shaft, which of course is one piece with the outer drum, is corroded. Really? Did we not expect water in our washing machine? The repair is $500. After reading all the bazillion complaints on this model (on the internet), I have decided not to repair the piece of junk!

I purchased my Whirlpool Duet Steam Washer and Dryer 4 years ago. My laundry never had that moldy smell. I paid for the set almost $2,900.00! Never again Whirlpool for sure!!!

I have a Whirlpool cabrio washer (Model: wtw6300 Serial Number: CT3573525) and I am very disappointed with it. The spin cycle is the worst--sounds like a jet engine and gives me the UL error message of unbalance load. The machine was purchased in 2007 but was kept indoors. At the beginning, I didnt care because I had warranty with BrandsMart. I had to call at least four times. But now, I bought the automatic control and it didnt work. For two days, I was trying to balance this machine but it is impossible since the beginning.I contacted customer service and they advised me to contact the repair service in my area to get a diagnostic analysis of the issue. Hello! I already know what the problem is after reading all these reviews! I cannot tell you how pissed off I am. I will never purchase anything Whirlpool. Two of the gas burners of my Whirlpool kitchen, after two years of use, are no longer working. I will definitely contact BBB as soon as possible. Come on, fellow complainants, let us continue to fight to get a possible recall soon! We all have the same problem because this is a manufacturing defect!

I am writing to inform you of my dissatisfaction with the Whirlpool Duet washer and dryer I purchased in December of 2011. The model and serial numbers are YWED94HEXL0/M12602088 and WFW94HEXL2/c12350046. After using them for several months, I have found that the performance of the washer and dryer to be poor. I find the clothes do not come out very clean. I used my mother-in-law’s GE washer to compare and found that the clothes came out much cleaner in her washer. I was astonished at the difference. The white clothes, especially, were so much cleaner than in my washer in which white clothes, especially, come out looking like they have not even been washed. I am unhappy with the dryer as well, which continues to shrink my clothes a lot. I am distraught with this situation as this was a big purchase for me. I believe the quality of the washer and dryer is simply poor and I would like an exchange with a better quality set which actually cleans my clothes. I rely heavily on my washer/dryer as I have three young boys who go through a lot of clothes. Please let me know what can be done on your end. Thank you kindly.

I purchased a Cabrio top-loading high efficiency low water washer thinking I was doing something for the environment by saving on water and electricity. After about a month, I noticed that my clothes especially those with stretchable fabric were getting larger. My husband kept telling me I was imagining it. Then the clothes would get all tangled especially the pants with ties on the waistband. At the end of the cycle, the clothes are stuck on the sides of the washer and I have to pull them apart. Even after drying, I have to iron everything even my pillowcases which look like they have shrunk they are so wrinkled. I recently bought some 100% cotton outfits and they are even more wrinkled and are starting to lose their shape. I am now noticing that the stains on the clothing are not coming out even when I use a spot remover and put them through a second time.Now I started to notice an odor coming from the machine and my towels and wash clothes have a sour smell. I paid $600 for this machine and after reading the reviews, I just want to replace it. I am now waiting for it to break down. My husband kept insisting I must be doing something wrong. When it goes into the spin cycle, it bounces all around and I have to push it back in place when it is done. I do not think the clothes are getting rinsed enough so now I put them through a second rinse and always put it on low spin. It doesnt see to matter, it sounds like a rocket ready to take off. Is it even worth it to go back to Lowes where I buy all my appliances?

Just want to pass on update on my dryer situation. Purchased a Whirlpool WGD4900XW1 3/9/13. The motor went out 6/22/15. Now Dec 2016 the replaced motor went out again. Whirlpool says... So sorry, we can get you a discount on a new one... ABT is giving me a break on the part so I am going to go ahead and fix it one more time. I assume in another 18mos I will be looking for a new dryer! DO NOT BUY WHIRLPOOL DRYERS. THEY ARE CRAP!! My brother also purchased a Whirlpool & it died about the same time.

I bought new and both have broken over and over. The oven takes forever to heat up. The fridges ice maker broke and then the defroster in the fridge side broke. Dont buy Whirlpool.

I bought my Whirlpool refrigerator model #ed5fvgxws07 in Oct. 2011. One year seven months later, I am experiencing my 1st breakdown. The refrigerator side is failing to cool. I have replaced the temp control thermostat and I am waiting to see if this fixes the problem. I have researched and checked the other possible problems and it is unlikely that it is a defrost fail as there is no frost build-up in the freezer section. And, I checked the heater element and there is continuity through the element. If this does not fix the problem, I believe that there is one other possible solution. I dont have $300.00 to give to an appliance repairman. Maybe I should give it a rap on the side as one other customer said a repair person did to make it work for a few more weeks.

I bought a whirlpool microwave on August 8th. The microwave was missing parts. I called whirlpool. They said they were sending me the parts, mind you this was not a floor model. So 2 weeks later pass I received no bracket No screws. I called whirlpool oh yes we got the address wrong. Resent it, just one screw no bracket and I needed 2 screws. I called again oh yes we did get the order for the bracket too but you have to pay $7. I said ok no problem. Can you do fast shipping? They said sure. I called Monday August 25th. They said I should receive it by Wednesday August 27th. I had to pay extra for the shipping. Here I am September 2nd w/ no bracket. Called again. They said it wasnt next day shipping, it was 2 day shipping and its at the post office. But the shipping number they gave me was for the one screw. I believe I should get my money back. I spoke to a supervisor, took her number down. Still waiting for a call because the mailman came and I didnt receive anything yet again.

We bought a Whirlpool oven in Costa Rica. Wanted a good oven from a reputable manufacturer. Oven has had numerous problems over the past 2 months. Local vendor is worthless and trying to run out guarantee time. Whirlpool U.S.A. says it will not help with problems for products sold outside US or Canada. Fair enough. THEN DO NOT SELL THE WHIRLPOOL BRAND WHERE YOU DO NOT SUPPORT YOUR PRODUCT.

Called Whirlpool customer care for help with identifying make and model number of a slide-in, ceramic cook-top range (one of their popular brands). The representative was cordial, patient and very helpful when it came to giving me directions on how to locate make/model information on the unit. That was until I let her know about a recent problem with the stove. The edge of the cooktop is much too sharp! My hand got cut while wiping down the stove top/adjacent counter. Although Ive had the stove for a while, Id never had that happen before; thats probably because I used a thin rag this time around to do the cleaning. I asked the rep if anyone else had reported getting cut by the stove top. She said, No. I let her know that my goal was to just them know about the situation, because such a sharp edge on a cooktop is a safety issue. She disagreed. But what could or should she have said? In all fairness, it came down to balancing loyalty to the company with genuine care for the customer.I do appreciate how kind she was in communicating with me, but am very displeased that once Id shared about the problem she seemed rather dismissive of the situation. How could the risk of being cut NOT be a product safety issue??? If you visit the Consumer Products Safety Commission website, you can see where risk of laceration is a reason some products are recalled. Based on that understanding, I would say that sharp edges on a ceramic cooktop IS a safety issue!

I purchased a Whirlpool refrigerator (model number GX5SHDXVQ02/K02778282) on 9/18/2010. It broke down in 1 year and 8 months; the circuit board control went completely out and ruined all my food. Whirlpool stated I was beyond the 1-year warranty and said there was nothing they would do, except sell me a 1-year warranty for $299. I was at their mercy, so I purchased the warranty for $299 and had the fridge fixed. I would like to be reimbursed at least for the $299 warranty charge. This company should be ashamed of manufacturing such a flimsy product and not standing behind the item to protect their name.

Our first Whirlpool washer barely lasted 1 1/2 years. They replaced it with another one that broke within 9 months. When it worked, it was great... When it didnt, it either overflowed or did not wring clothes tightly on the second rinse.

I purchased a Whirlpool Cabrio washer in July of 2013. In the first 6 months had a technician in to repair it. Worked fine up until now. The washer fills up, the clothes just soaks there for awhile (doesnt wash) then drains out. It doesnt fully drain so I have to put it on spin and drain again. Any suggestions on what I should do?

When we moved into our home this past year there was a Whirlpool gas stove model number W10406473A. We have the plastic knobs on the front of the stove which need to be pushed and turned in order to turn on the gas. I recently ran into a serious problem where my cat walked across the knob area and pushed and turned the knob causing the gas to come on the stove. This is a problem due to the fact that a child could have also have easily turned on this stove. This is a definite fire hazard as well as a carbon dioxide problem. I warn anyone with this stove to replace it with another make or model immediately. Im in the beginning mode of looking to see if a recall has ever been made on this model.

The refrigerator I have is 3 years old and the service tech will be at my house on Thursday to put the third comp. in it. I have lost all my food 2 times. Times are hard. I would like to talk to a person not a machine.

I purchased my Whirlpool Gold Series refrigerator from Lowe’s in Rockledge, FL. This was my third purchase after returning an LG Refrigerator as well as a Samsung refrigerator for having multiple defects! My Whirlpool Refrigerator purchased June 2014 has motherboard replaced that showed obvious evidence of factory board flaws when boards were manufactured. Top mounted ice maker drips so much water it fills my veggie draws with water ruining my food. Mold is present inside my ref now from constant leaks. Drawers were replaced by tech also due to ill-fitting design during first few months. Water will not dispense in door after one year, gave up using it. This is a horrible and very expensive appliance wrought with POOR DESIGN FLAWS. WHIRLPOOL does not care about its consumers. Their engineers must be some of the worst in the world. Our old 70-year-old kerosene powered refer in the Bahamas is still making ice, yet most modern day refs are like buying cheap home computers that constantly need service to keep them running. It’s a lifetime investment with $89 first service visit to determine problems then weeks of waiting for parts and second visit for the repair to be completed until next electronic malfunction. DONT BUY A NEW WHIRLPOOL APPLIANCE. WAIT AS LONG AS YOU CAN FOR ALL THE CLASS ACTION LAWSUITS AGAINST WHIRLPOOL & Kitchenaid to play out.

My new Whirlpool refrigerator has accumulated ice on the top of the freezer compartment from day 1. I called Whirlpool and a repair was scheduled five weeks later September 12. The repair person said he needed a part and would order a new light switch and ice door parts from Whirlpool. Ten days later he came back with a new switch and instructions to file some plastic off the ice door part so it will close properly. It only partially worked; ice stopped forming in the ice chute but still formed on the top around the light switch. The new switch is not flush with the liner and the plastic liner has a small crack starting at the switch. How Whirlpool wants to cut out a six inch square of the liner including the switch and glue in a patch. This patch would only be warrantied for the balance of my one year warranty. I find this unacceptable and will complain to the store where I purchased the refrigerator.

I purchased a Whirlpool Duet washer in Jan. 2011 and there has been 3 problems. There has been water leaking, loud/banging noises during the spin cycle, and torn clothing. Technicians have visited 4 times in 7 months. At this point, I forsee more problems in the future. I spoke to a supervisor at Whirlpool and I asked if the washer could be exchanged. I was told, If it is repairable then we will continue to repair it. I was also told that I could purchase an additional 1 or 2 year warranty. A comment like that makes me believe that the company foresees problems in the future as well. A company like Whirlpool should realize that customers should not have to spend time leaving work early or taking off to meet with a technician about an appliance so often or at all! I have owned a washer in the past but it was left when we sold the home and I never experienced any problems!

Purchased side-by-side 3 weeks ago. There are 2 adults and 1 kid in my household and the ice maker in the unit does not put out enough ice to handle our small demand, though this was never an issue with the 14 year old Whirlpool that this one replaced! We are using ice trays to supplement what ice the ice maker puts out but the ice trays take up valuable freezer space. Their service reps have inspected it and tell me that it is performing per the specs and when I ask for what the remedy is, there is none... ie. too bad, so sad!! I am apparently on my own with a brand new refrigerator with an ice maker that wont perform up to minimum expectations!

Late on the evening of Monday, January 27, 2014, after springing a leak in my 8-year-old water heater, I purchased a new Whirlpool model N50T61 replacement from Lowes. Installation went smoothly and the unit lit off fine the first time. It heated the initial tank of water rather quickly, but the next morning, I noticed the status light on the control unit was not blinking, which indicated the pilot light had gone out. I relit the pilot light, the water heater fired off and appeared to be working properly. 12 hours later, the status light was out again. I relit the pilot, but within 20 minutes, it went out again.On Wednesday, the 29th, I called Whirlpool customer service and explained to the representative what had been happening. He stated that since the status light was not blinking a code, the problem was either an air supply or venting problem, and he couldnt help me. I relit the water heater again and performed the match smoke test described in the owners manual on the vent connection. It did exactly what the manual said it should do, so I assumed that was not the problem. However, while performing this test, the water heater went out again. This time, being right there when it shut off, I saw the status light blink twice about 5 or 6 times before it quit blinking all together. The two blink error code indicated low millivolt signal from thermopile.I called customer service again and explained to the representative what the first person had told me and also told him the results of my test and that this time, I had observed the two blink error code. He asked if I had a multimeter (which I do), so he had me disconnect the wires for the thermopile, connect the meter to the wires, light the pilot and read the voltage. My meter is an old analog unit, and not capable of reading millivolts (which is what the thermopile output is), and I informed the rep of this, but he had me do it anyway. As I suspected, I saw absolutely no reading on the meter. The service rep stated that he believed the error code and decided to send me a new thermopile assembly. However, their shipping department was closed for the day and I should not expect to see the new part until Friday. This was unacceptable, but he stated that this was the only option available to me.After thinking about this situation for a while, I again called Whirlpool customer service and told the representative that I was not satisfied with the solution previously presented to me and that I wanted a return authorization to take the water heater back to Lowes for replacement. The rep stated he couldnt do that, but said that there were a couple other things I could try. He attempted to explain these procedures to me, but wasnt able to do so clearly. He stated he would email the instructions to me. As of this writing, I still have not received the instructions.In the meantime, I did some internet research and found that Whirlpool water heaters have numerous chronic problems, including the issues I was experiencing. I decided this was not a product I cared to own. I called the Lowes store where I purchased the water heater and spoke with the manager. I explained the entire sequence of events to him, and he told me to bring the water heater back for a full refund. Since my local Lowes store only sells the Whirlpool brand, I took the money and purchased a different brand of water heater from another home improvement store. Needless to say, it will be a cold day in hell before I ever purchase another Whirlpool product.

Purchased 7/2015. LOVED it @ 1st being the key word. Notice grayish residue on clothing. Mainly on black. Towels discolored and lint on clothing. My kids were blaming dye in the detergent, & using Purex Crystals. I changed detergent to Armen hammer sensitive clear. Stopped using my beloved crystals. Wrong! Cleaned the rim @ the top of the agitator all the dirt & grime get ps trapped in the rims it helped some what. Additional problems occurred. From time to time started noticing unbalancing no matter the load size. Paint bubbling, peeling & rusting. The lid lock broken. Nightmare trying to get an appointment through Whirlpool. Referred to go to a dealer. Called Sears. Gave specific details whats wrong. Appointment 2 wks out. Service arrived, he had no idea why he was there. No info given. Then he said he doesnt have the part. He ordered it and said itll be sent to me approx 5 days. But wont be fix for another 3 wks. Same with 3 people from customer care. Informed this is not acceptable. Another problem now when unplugging it still stays on its hold electrical current. This can not be replaced until its deemed its broken & cant be fixed. They rather your home catch fire. They dont care about the inconvenience for 2 1/2 months.

I purchased my Whirlpool French door refrigerator about 2 years ago. I shopped around and read reviews before deciding on the Whirlpool. After about 9-10 months the ice maker didn’t seem to produce enough ice. I called the store I purchased it at and tried to get them to come out and find out what was wrong. They waited and waited. I had to call them back at least 2 times before they finally sent someone. But by the time they sent someone to look at it the one year warranty had expired. I spent $1800.00 on this refrigerator and it didn’t even last longer than a year. Of course Whirlpool wanted to come look at it and charge me another $100.00 service call and possibly another $100.00 for parts and labor. I will never buy a Whirlpool product again.

Whirlpool Cabrio - I have had the same experience as those others that have written reviews - over $1,600.00 (on sale) - approximately 3 years old and I was just informed by a service repairman that water has leaked from the center of the tub into the motor and it is trashed. I went to the Whirlpool website to chat with a representative and they are sorry but unfortunately, we cannot guarantee there will be no repairs or parts replacements needed as components do deteriorate or fail on occasion due to factors over which we have no control - they went on to say that since the washer is approximately 3 years old there would be no assistance that we would be able to provide toward repairs. I agree that a class action suit should be considered since Whirlpool is taking no responsibility for a machine that costs too much - makes your clothes smell and lasts for such a short time. Highway robbery!! The dryer is no better but at least it is still working (today anyway!).