We got the convection oven. It has no element like the one we had before with the fan. It is useless. We have to upgrade the temperature to get what we want. Difficult to clean. It does not cook like it should. We do not like it, period. Those electronic controls are not doing their work. No more Whirlpool appliances. Problems with the noise of our dishwasher also.

I would like for the public to be aware of an issue I have had with my Cabrio Whirlpool washer and the extended warranty service that Whirlpool sells to customers. My Cabrio washing machine is less than three years old and is an inferior product. The circuit board has gone out on my washer twice. Each time my washing machine breaks, it is out of service for three weeks and I have a family of four people. My washing machine broke down with a major circuit board failure for the second time in three years on January 23rd. I called the extended warranty department at Whirlpool and they sent an incompetent repairman to fix my washer. We are going into week 3 of listening to various stories on why it is taking three weeks to source getting a part overnighted to fix our washer. This man has ordered the wrong parts, says he cant come to us because of weather, cant get the parts, etc...I just got off of the phone with the warranty service after speaking with a supervisor and they tell me they cannot source another repairman and we still have to wait. My questions to corporate office at Whirlpool is how long do you have to wait to get a washer repaired and what type of product and extended warranty are you selling to the public? A very inferior washing machine and a very unhappy customer! I will never buy another Whirlpool appliance! BUYER BEWARE, THIS COMPANY HAS POOR CUSTOMER SERVICE! THIS IS MY SECOND GO-AROUND AND THE SECOND EXPERIENCE HAS BEEN IDENTICAL TO MY FIRST ONE - TERRIBLE!

The tub mounts of my 6 years old Whirlpool washer are broken. It’s too expensive to replace. Seems like built in obsolescence! Ive also had mold/odor issues. Finally, I know how to fix that, now this. I just want to warn others, these machines are not designed for the long haul.

My wife and I made the unfortunate mistake of purchasing the Whirlpool Gold Series, model #WRF989SDAM00 refrigerator two years ago...yes TWO YEARS AGO! We have experienced numerous issues with the appliance but our latest (no cold air in both the fridge and freezer) prompted a call to a service center. The serviceman that showed up knew immediately what the issue was, our compressor and evaporator had malfunctioned and according to him, We have seen the same problem in a number of these models and that Whirlpool has since redesigned the casing to prevent this issue in new models. What about those of us who purchased the previous model?! Now shame on us I guess for not purchasing the extended warranty...I suppose I just took it for granted that in todays competitive manufacturing world Whirlpool would be committed to building a quality product! Because of this I was offered two options from Whirlpool. #1 - pay for the parts yourself...over $800 or #2 - purchase their 1 year warranty program @ $350/year, this warranty will cover all parts and labor for an entire year. Based on my experiences though, I will need to purchase a 1 year warranty @ $350/year for the life of this lemon, potentially costing me $5500 over a 10 year period. I ultimately took option 3...tossed the piece of junk and bought a new fridge from their competition. Dont be fooled by the attractive design and appearance, the Whirlpool Gold Series refrigerator is a money pit waiting to happen!

The oven will not turn off. When I called Whirlpool and told them what had happened they immediately put me in contact with the safety division. My question is if it is a safety issue, why is there not a recall and why do I have to pay for the circuit board. If there is a safety issue why is there not a recall.

I would not buy any Honeywell electronic water heater thermostat. Has failed two times. I have to pay for a new one to be mailed and for repair. A bad product from all the reviews. Honeywell is claiming they do not service it anymore and gave me a Sears telephone number. Servicemen have said it is a crap product and fails all the time.

I have always had Whirlpool Everything - not anymore!!!! I purchased a water saver washer that I am very unhappy with - it does not get the clothes clean. I have to put it on an extra rinse (water saver?) to get the soap out. I use the Tide for HE washers. I cannot wash a large load in it - directions say I can. Anything too heavy or bulky will not spin out well. Will bounce all over the place. From now on I will switch to another brand. They push so hard to buy a warranty because they know you will have trouble! Should have read the reviews!!

Cabrios have an inherent F1 error problem, The company had an initial recall and fixed it once, but problem reoccurred about 14 months later. Company declined to fix it. If there is any type of lemon law on appliances, this would apply. I would not recommend this washer.

I will never buy another Whirlpool again or recommend them to anyone, and discourage anyone from buying one. I bought a Cabrio washing machine just over 2 years ago and yesterday I received an F51 error code. The manual says that this code requires a technician to come a check for repairs. Well, before I do anything I google the problem, and lo and behold there are thousands of complaints about this issue with the Cabrio models. Some saying that what needed to be replaced were a control board ($280) and a rotor (unknown amount), not including the price of labor. Some said that Whirlpool knows about this problem and they covered the parts and repair. This didnt get my hopes up, but I called customer service and of course they said that there were no reported issues with the model and that what I found on the internet was probably an older model. Of course! The lady on the phone told me that they would not cover the costs and it would be anywhere from $300 to $500 depending on the route I wanted to take. That is a 1/3 to 1/2 the price I paid for the machine. This is ridiculous! I am tempted to just get rid of the washer and go with a better company that actually cares about their customers. This error code was definitely something they know is a big deal if there was nothing I could do about it other than call a technician. I paid almost $1000 for a machine that has barely lasted 2 years before I have to pay money to have it fixed. Not a company I would ever purchase anything from again!

Bought a Whirlpool fridge at Lowes sale when the previous Samsung suddenly died before the Thanksgiving Day. Under the circumstances at the time, it was largely a price driven decision (for a fridge of a certain size with some non-negotiable characteristics, though.) I could not be happier with its performance in the two years since the purchase.

Whirlpool duet steam model: WFW9750WW00Serial: CSY3601165Please see attached the pictures of our washer that was purchased without a top counter balance from HH Gregg in May of 2010. We were told by the extended warranty technician when he came to diagnose the machine on 6/24/13 that the bearing and basket were bad. He ordered the parts and returned on 7/2 to repair the machine. Upon taking it apart, he discovered the top counter balance was missing and was the reason that the bearing and other parts had failed. I will include pictures of the plastic that the counter balance should have been attached to. You can see there are no screw holes or scuffs on the plastic. It was suggested by one of the customer service agents, Kitty in TN, that we remove the counter balance. Per Kitty, Because had it come from the factory like that, it would have walked all over the laundry room and not worked right since the first day. Honestly, we have scuffs all over our walls and my husband just thought the legs needed adjusted or it wasnt sitting properly on the pedestal. We have never owned a front load washer, so we didnt know what to expect. The washer sits in a very tight space under the cabinets, but will walk in the middle of the floor especially before we installed the pedestal.The top counter balance was ordered on 7/2 and we were told it would arrive and be installed today. The technician called me at 10:55AM today and stated the package had not arrived. We are asking Whirlpool for a replacement washer as the one we purchased brand new came from the factory defective. We have been told a solid NO. Upon further inspection of the machine while taking pictures, I noticed that the bottom counter balance is cracked clear through as well. Im attaching pictures of that. I did speak with Laticia in MI. She was VERY nice and more empathetic than the other 6 or so people we have spoken with at Whirlpool customer service. She was professional, helpful and I hope who Whirlpool would want representing their company and brand.We feel Whirlpool sold us a faulty machine and they should replace it. We have been told by them that they are sending the parts as a GOODWILL gesture, and will have the parts installed. Now after the whole inside of it is shot and possibly the motor and boards, thats awesome. We are now an LG/Samsung family. This was our 3rd and last set of appliances from Whirlpool. When the rest of these die, we will replace with another brand. How sad that what once was a great company, and I grew up with my mom and grandma thinking there was no other brand to use beside Whirlpool, now we are left washerless for 3 weeks. They refuse to stand behind a mistake that was made in the factory. Ive read these are made in Germany. Maybe Whirlpool needs to bring jobs back to the US and improve their quality control.

I am so unhappy and frustrated with this washer by far worst washer I have ever had!! Doesn’t wash clothes clean. Sometimes I have to wash things 2-3 times and then they aren’t necessarily clean. For what I had for this pair I really got ripped off!!!

Weve had this washing machine only a few years, and our household of 2 probably averages 1 load of laundry per week. Weve always had the same problem everyone has with the detergent stains on clothing and having to rewash loads, and the only remedy weve found was using the oversized loads setting and rewashing a load. The last straw was 6 months ago. It quit going through a complete cycle and would not spin out without resetting it. Then it quit spinning out at all. Service Guard, a 3rd party warranty company, diagnosed a faulty motor and ordered a replacement. After a long delay Whirlpool advised it was back-ordered for 3 months. A week ago Whirlpool advised them it was now back-ordered until 5-27. They did not know whether wed ever obtain a replacement motor. After taking clothes to our sons house for a couple months to wash, we purchased another used machine to use until ours is repaired. It is beginning to appear that machine may be our permanent machine. This is a pretty sad testimonial about whirlpool. We have always used Whirlpool appliances but appears we may have to switch brands. And it certainly does appear these low water machines are garbage. Very disappointed in Whirlpool.

I came here to see if others have had problems with their Whirlpool Cabrio top load washers. I was amazed at how many others forked over nearly a grand ($1000 with tax and extended warranty) for such a heap of nothing. I have lived in the same house for over 35 years, same water supply with water softener. Over this time, I have raised my family and been lucky enough to only go through two washers until 2 years ago when I purchased this Whirlpool Cabrio machine at Lowes. As with others, clothes do not get cleaned. Residue is present and in the creases of the tightly spun and tangled load. After calling Whirlpool and Lowes on nearly day one of my original purchase, no concern was given. Instead, I received the What type of detergent or Could it be your water supply? or What degree of soil does your family have on their garments? A white terry cloth washcloth should not come out grey, even after bleach! My GE and Maytags of the past always did fantastic jobs. They just plain old wore out. As for my new energy efficient machine that takes 86 minutes to wash a load, with expensive HE detergent, an oxy clean pouch, special fabric softeners, I scratch my head wondering how can this be efficient? If a pair of jeans needs pre-soaking, it cant be done in this washer. Instead, I spray the jeans with pre-soak, add my HE products, then fill a mop bucket full of water and dump into the machine 5 minutes after the 86-minute session has started. What a joke! For two years plus, I have vented to my poor husband who thought he was buying me a new innovative state of the art machine to make my life easier. I only wish there was somewhere or someone that I could contact to get some satisfaction for my agony with this poor quality product! Yes, I am venting. I dont have another thousand dollars to spend for a new machine. Believe me, if there were to be a class action lawsuit for this lemon, I would be first to sign up!

I HATE this washer!!! Did I say hate this washer? YES. Do not buy it. Delicate cycle. Ha ha ha. NO!!! Good thing Im retired because I need to check it every 5 min to see if its getting clothes wet or untangle a mess. I find I use the rinse and spin cycle once with a little soap and run it again to rinse. A lot of extra work. Sheets washed in the deep water cycle turn into a giant twisted mess if you dont stop machine and untangle everything. Hate it. Hate it. Do not buy this machine. I use more water by washing things twice or fewer items. What a waste of time!!! Locking lids are the worst thing ever designed. Why?? Dont tell me some stupid kid is going to climb in it. We should have a choice or be able to disable it!!! Worst machine ever designed???

I purchased a Whirlpool range from Lowes for $750.00. After 13 months, the digital circuit board went out and cost $580.00 to repair. I thought this was odd since the range was fairly new. The service tech said the boards are a common problem. Two years later, when using the self-cleaning mode, the door was locked and the board was out again. So this must be the issue because that is the same problem that happened the first time. This must be a design flaw! The board cannot handle the heat generated in self-clean mode. Way to go Whirlpool, put the board near the oven door where it is subjected to extreme heat and melts!

Whirlpool Cabrio Platinum top loader 2014 model - This washer is an over engineered piece of junk. It takes forever to wash anything and it never gets anything clean. I wish I would of just bought the repair parts for my old machine which I had for twenty-three years.

We purchase the Whirlpool Gold Dishwasher GU2400XTPB7 with our new home. This dishwasher has a plastic tub. For some unknown reason the dishwasher started to leak, I checked every hose connection and could not find the leak until I noticed four small burn marks in the plastic tub underneath the heating element. It actually looks like someone took a cigarette to the plastic. One of the burns went through the plastic tub, and this is where the leak is. Note: at no time did any of our dishes touch the heating element.I called Whirlpool customer service and they said they would send a technician out for $81 and in addition I would be charged $19 for every 15 minutes of service. I had asked to speak to a supervisor and he recommended that a technician come to my house at my expense and all the supervisor could say was that he was sorry, which became even more frustrating. No remuneration was offered. I have had other issues with our Whirlpool washing machine (holes in clothes), gas range stove (ignitron issues), and fridge. l will never purchase any Whirlpool product again including Jenn-Air. I made this quite clear to the supervisor. Whirlpools products and customer service are inferior based on my experience with our four appliances. It would be great if they actually practiced what their mission statement suggests, because as a customer I truly feel defeated.

I purchased the Whirlpool Cabrio Washer thinking I was purchasing a quality product. Unfortunately it was one of the worst decision my wife and I have made. The bearings (lower) only last about 2 years. We purchased the extended warranty and the first time it was covered. The second set were not covered and now we will have to change them again. We will not ever purchase another Whirlpool product. I contacted them several times with no positive results. I still saved the last worn out bearings to show the CEO. The engineers do not have a very good idea to make the lower bearing last. Where I purchased the machine they told me after the first change that it would happen again and they were correct. If anyone needs to contact me about this product feel free. NEVER EVER BUY A WHIRLPOOL PRODUCT.

Whirlpool washer WTW7800 Cabrio - I bought this machine in Oct 2010 for $900.00. This October, the lid started not closing. Next thing I know, the glass is popping out. After waiting on hold for 20 minutes, I was told there is nothing they could do but refer me to a repairman at a cost of $179. The glass is popping out. This is a defect not caused by washing clothes but poor workmanship. I am on hold again. I am calling channel 3 news to do a story and will not stop until it is fixed.

I purchased a home from Pulte and closed in June of 2020 and had no choice but to take Whirlpool appliances. Pulte does not offer high end appliances in order to maximize their profit. The first thing that failed after only 3 months was the Microwave and because we didnt want to get the same cheap microwave we upgraded and paid 400 for a Kitchen Aid, same size but never received the trim kit that matches the oven that came in sometime in October 2020. It is now January 2022 and we are still waiting for the trim kit. Every time we call to find out we spend hours on the phone.The refrigerator is a cheap version of the worst refrigerator made in China, the ice maker works ok but ice gets stuck in the chute and when it doesnt get stuck half goes to the glass and the other half to the floor. Poor design and we are stuck with it. Tried to buy an LG from Costco but it wont go through the door so again we are stuck with this small refrigerator with no room for groceries for two people. Stovetop is also cheap, only looks good the day we got the house, one of the burners would go off when turned to low with gas still flowing. Grates look 10 years old but must admit we cook every day. Oven will not calibrate and it is not accurate so we have learned to set everything 10 degrees higher to make up for the variance. Dishwasher had issues as well, unless you run it for 3 hours the shorter settings always have dishes or utensils still soiled. Warranties have expired after one year so it is now time to replace almost everything if we want decent appliances. Very disappointed but I blame Pulte for buying cheap.

Please do yourself a favor and stay away from both Whirlpool and this unit. I purchased it from a local dealership and paid $881.00 which included tax and delivery cost. In less than 2 years, it broke. Whirlpool does not offer a warranty on the unit. After having a Whirlpool repair person come out for a cost of $75.00, I was informed that the parts to replace would cost $800.00 not counting additional labor cost which was TBD. I contacted Whirlpool and went from Agent (Phylicia) to supervisor (Ashley) to Manager (Carol **). The best offer I was given was to buy the parts at a discount of $400.00 which did not include tax, delivery or labor. So it would have run approx. $550.00 to over $600.00 to fix a $771.00 washer.My next letter is to Jeff Fettig (553 Benson Rd, Benton Harbor, MI 49022/ CIO of Whirlpool) to let him know how impressed I am with his product and customer service support. The next Whirlpool item I buy will be never. Take this as a word of warning to go Maytag or any other vendor because Whirlpool will not support you once the sale has been completed. Good Luck.

Whirlpool N50T91-403 purchased in Mar 12 had an error code 4. I knew the water heater had a safety installed in it when I was working on the plumbing and allowed it to drain the hot water side down to 16% of capacitance of 50 GL. After the plumbing issue was resolved, I saw the water heater had shut off (thermal protection) but the switch wasnt tripped as far as I could tell. Knowing small processors can only remember anything if they have power, I removed the Honeywell circuit board and with my multimeter probed all of the capacitors contacting them both (-) and (+) and in reverse order. Doing this forces the IC to forget its codes because they require a small amount of voltage to remember them, usually powered by a small capacitor. I reinstalled it and voila! Presto! It works again.

I have been TRYING replace a damaged panel on a $10,000.00 Jenn-Air refrigerator for over 10 months now!! Whirlpool is the supplier of Jenn-Air - I have probably spent at least 3 HOURS on the phone talking with one rep after another who ASSURES me they will deal with my problem!! Last week I gave my credit card # to the rep - who told me my part was sitting there, waiting for my # to be shipped. When I asked why no one had called me to let me know, especially considering the amount of time I have been waiting - she said she didnt know. One week later, I call AGAIN to find out why my credit card does not show the payment. Only this time to talk to a fellow who says my part is still on backorder, and they used my card # to put a $1.00 charge against it - to hold it for when my part arrives.. BUT has NO IDEA when that may be! I feel Angry, totally discouraged, lied to, and used! I will NEVER purchase any appliances under the Whirlpool affiliate. This is abhorrent customer service - a $10,000.00 appliance and this is how it is dealt with!!! Bad, very bad!!

After much frustration and disappointment, as well as 2 huge repair bills with my front loading washing machine I sent it off to the scrap yard, still looking brand new, and went back to a top loading machine. I purchased a Whirlpool top loading, high efficiency, low water machine. I have had it for almost 2 years now and am extremely happy with it. I would highly recommend it. Fairly quiet and easy to use and takes very little detergent. It does not have an agitator so it is gentle on clothes. I know some users have complained about tangled clothes but, in my opinion, if it is loaded correctly this should not be a problem.

Bought Whirlpool Gold 21.9 bottom freezer (stainless) Jan. 2013. When it was 19 mo. old I noticed the freezer door was pitting. I have the Lowes protection plan. Not their problem, door is a accessory not a part. Whirlpool said no quality issues with the material. Very disappointed Whirlpool did not stand behind a product they sell. From past posts I am glad we did not hook up the ice maker.

Old stove does the job. I need a new and updated one. Need a warming drawer. Lower drawer does not close properly anymore. Paint on back panel is chipping. We are limited to range choices because of space.

The ice maker only makes enough ice for two small glasses. I wish Whirlpool would buy it back and let me buy a new side-by-side. I have to buy bags of ice because of this. I truly am very unhappy with this Whirlpool with the freezer at the bottom. For what I paid for it, this refrigerator is not worth the money. The model is G165DRXY07.

Never again will I buy a Whirlpool product. I paid over $800 for a new washer 51/2 years ago. I had it worked on twice under extended warranty. Now the bearings are out of the tub and it sounds like a jet taking off when it spins. I had whirlpool products in the past and they lasted for years with no problems. I have a friend who has a relative who is an engineer for whirlpool and his job is to engineer their products so they fail within a certain time frame. They dont want them to last like they use to. They now have gotten their product line to the point where they can tell when it will fail. This is crap. What happened to products that lasted like they use to. NEVER BUY WHIRLPOOL.

I bought a Whirlpool dishwasher. It has a plastic removable cap to pour in the liquid for their Rinse Aid drying. It is something like a bottle cap, a 25 cent part. I lost it. I called up, they wanted 12 dollars for the part and 9 dollars for shipping. They refused to just put it in an envelope and put a 30 cent stamp on it.

My Whirlpool washer Cabrio wtw5640xw0 is 2 years old. The computer board is shot, the FOES off balance. To repair would be 554.00 plus tax. I have to say this is the worst washer I have ever bought. My niece told me she just replaced hers that she got 2 years ago also. There should be a recall on this washer. Also I was told the washer and dryer should not share the same outlet.

Product number 0733318 Terrible water heater - Check valve went after 2 years. Replacement has to be shipped from TN. $30 to next day it or else I can take cold showers for a week. Warranty does not cover shipping or installation. My opinion, buy puts on WHR. Absolutely crappy product.

We recently purchased a new Whirlpool refrigerator and washer/dryer set from Home Depot. The truck for delivery was late and unable to pick up the refrigerator in time for scheduled delivery. Whirlpool contacted us to inform that it was now on back order for another week claiming there was nothing else they could do. Strike one. We paid for the installation and kit for the washer and dryer set. The tech who delivered them claimed the kit was not correct and that he could not install the dryer. We contacted Home Depot, Whirlpool, and had Home Depot call Whirlpool on our behalf with no resolution. They will not refund the installation even though they didn’t install anything.Whirlpool will not directly say whether or not they will send someone else out to actually install it this time. To top it off - I asked the Whirlpool rep which kit needs to be used and she told me whichever I want... for a gas hook up... whichever I want. This is ridiculous and Whirlpool has the worst customer service I have ever experienced. Side note - don’t waste time on the chat feature they provide. You will be directed back to the 800 number with 30 minute hold times. Horrible company!

Have had this refrigerator for about four years and its broken down twice. It has rust and stains on the outside which are hard to remove. I have had other refrigerators that have lasted longer and were in better shape.

When out of town power lost, fridge did not start back up... Everything lost in fridge! If you do not lock it will not restart on power on! I found this out on my own. Not even mentioned when I called cust. service. They were stuck on telling me act of God --- not covered! Would never purchase again!

When we bought our side by side fridge (model GD5RVAXVB02), the manual said to clean the condenser coils if you have excess dust and/or pet hair. We have both. We tried with the vacuum and with a brush but it is impossible to get to the coils because they run side to side instead of front to back. You can only get to the first coil in front. The rest cant be accessed from the front, sides or back. I called to find out how Whirlpool recommended they be cleaned and they could only recommend a vacuum attachment tool (8171579A) to clean the floor below the coils or a coil brush (4210463RW) that cant reach the coils! This design is meant to fail prematurely. They could have easily installed the coils running front to back so they could all be easily cleaned.

Absolutely love the oven/range electric smooth top! Cleans up well. Works well. We bought new along with refrigerator and microwave as a set. We had problem with icemaker, told us we needed new door (well within warranty coverage) then wrong door was sent and company told us that they could only send one door and that was it. Incorrect door sent back. Repairman attempted to fix several more times. We finally quit trying. Husband says we can never buy Whirlpool again.

I have had my Whirlpool stove for over 30 years and use it daily. Still a great stove. I would not trade this stove or any of the new types. I just need to get the self cleaner repaired. The only problem I have is finding parts to fit this older stove.

We purchased a Whirlpool dryer about two years ago. Unfortunately I havent had the time to compose a letter stating my dis-satisfaction until now. After much research and haggling we decided on the Whirlpool Cabrio Platinum model, a very efficient (we thought), and even attractive model. It has proven to cost us much more than we bargained for, as EVERY time I do a dark wash, which is usually two to three times a week I must re-wash the items once or twice after! All of the items come out of the wash with white spots all over. Thinking it is soap, I run the wash again on a rinse cycle: nothing changes. Then I redo the wash - this time not using soap. The result is a bit better, but I still have to take a wet washcloth and rub the areas out.I did voice a complaint one time to which I received a letter stating that I should read my manual, specifically the troubleshooting guide. I dont have time for this. Again, we purchased this machine for its cost and efficiency, yet its ending up costing much more than it should as for every load I do (of dark clothes), I have to do one or two additional. (No telling what is on the light or white clothes that I cannot see because of their color!) This machine has been a total waste of time and money; I will never purchase another Whirlpool machine as I am extremely dissatisfied with this product.

Purchased the Whirlpool Cabrio washer January 2010. Purchased the extended 2 year warranty from Lowes. After about a year I noticed around the bleach dispenser it was starting to rust. Over some time it worsened and grew bigger around all sides. I was unhappy about it, but thought it was just cosmetic and didnt pursue the issue. Now it must be on the inside and has started putting yellow spots on all of our clothes. It was only a towel or two at first and now it is on everything. I called Whirlpool and Lowes customer service center and they are just sorry and will not do anything. Lowes warranty does not cover any rust whatsoever although I cant find that stated on the warranty papers. I will never buy another Whirlpool product, ever. $600 for a washer and $70 for an extended plan to last on 3 years. I know people who have washers for 10 or 15 years. Im so disappointed.

I purchased a Whirlpool duet front load washer 1/2013 new from Lowes. In 5 yrs it is my 2nd washer of Whirlpool. After 2 1/2 yrs, the bearings have gone out, also every time I run the cleaning cycle, water leaks out under the washer. My boyfriend looked the parts to fix the washer, since I called Lowes concerning the warranty and its out. Cost to repair, just in parts would be around $400, I paid a lot of money for a product to last only 2 1/2 yrs. Such a lack of quality in workmanship. With these price, there should be better quality. Do not purchase a whirlpool. 2 washers for them in 5 yrs is not a great track record.

Our 2005 whirlpool duet washer steel drum and plastic tub broke. My husband diagnosed the problem and opted to fix it to save money. The parts are under warranty but you still pay labor and technician visit running up to $250-$300. The plastic tub was obtained only if we paid for it $100 and the steel drum they sent under warranty. The plastic tub has a hole with a black plug and sensor in it. There is a discrepancy in the measurement of the old tub and new tubs hole that is slightly larger, therefore when installed a steady stream of water leaks out. I now have 3 plastic tubs as that was their solution, to send more of the same that did not measure correctly. An investigation was done to determine they were the correct parts. As asked we had a whirlpool technician come to verify parts were correct and being installed correctly and the parts sent would not fix the machine due to the hole discrepancy. Many calls were made to whirlpool and they continue to give me the runaround. They now are not taking their technicians information. The technician has given the information to 3 sales reps in the new england area and made several phone calls to whirlpool and no one is willing to give us a solution.

Havent even had the Cabrio washer for three years & Ive hated it since day one!!! First, our clothes dont come out clean OR come out with white streaks (changed soap, still happened!). Washing bedding is a nightmare! They are sopping wet & I have to wring it out. Finally broke down today & the repairman quoted over $600 to fix (paid $800). Take this piece of junk away!!! It cost me less to replace than get fixed; way to help the environment!

I have a 5yr warranty. Im 3yrs in on the 3rd repair. Horrible. This time they cant get the part and Ive been dealing with them for 5 almost 6 months. I spend countless hours on hold trying to get a real person... When I do they send me to someone else where the queue starts over. I paid $400 extra to just have them replace the fridge and its been over a month and they cant even get a new one delivered. Just refund my money! This is beyond the pale. Dale, Sunrise Beach Mo.

I bought a whirlpool 40g gas heater with the Honeywell gas valve. In 5 years Ive had to replace the valve two times. Thankfully the valve was under warranty both times. Our old water heater was Twentynine years old before it started to leak, this new electrical diagnostic high tech gas valve keeps breaking showing a overheated error and the only way to fix it is a new valve that only Honeywell sells thats well over 100$. Talk about a scam!!

Purchased a new home in Florida. Builder used Whirlpool appliances. For a year opening the refrigerator door has caused breakers to trip off. No matter what builder and Whirlpool do, breakers keep tripping. Cannot sell house with this issue. If someone was counting on electricity for a medical device they could die when refrigerator causes power to go out. Unfortunately, it looks like legal action is the only thing that will save our investment in the house.

Let me just start by saying I have multiple Whirlpool appliances, and I have always bought Whirlpool appliances in the past. I bought a refrigerator 3 months ago, and it quit working. So, I called Whirlpool to come service it. The service repairman said someone left the freezer door open and it froze up. Two days later, I had to call them back again, because now, the fridge part was not keeping food cold. He came back out and told me it was the compressor. I then in return called Whirlpool that afternoon, and they refused to replace it saying they had to follow their Warranty Policy and they would call me back on Wednesday. They did call back on Wednesday and told me they had located the part. I got a call on Tuesday of the following week and was informed they could not locate the part. I called Whirlpool the next day, and they told me they would have to send it to their Exchange department for review and I would hear back from them in 3 business days. I asked for them to rush my request, but they told they have no way of doing that. I will never buy a Whirlpool product again!

Last year, our clothes started coming out too wrinkled. And until recently, its making a loud noise like an airplane. I called Whirlpool, and the only help they can give me is finding a company that would do service and would charge a lot.

I purchased a washing machine and dryer 1 year ago. Since then it has started to get spots on the control panel where you select size, temperature, etc. I also purchased an extended warranty through Home Depot and is still under warranty for 3 years. I was told for a few more days is still under man warranty. I contacted Whirlpool and they said it is not their problem and sounds cosmetic - I think this is unfair being that I spent a lot of money and it has started appearing on the washer and dryer. No one wants to be responsible. I am a consumer who is very careful and have not had any spills or cleaned it with anything.

Purchased Whirlpool dishwasher and range approximately 16 months ago. Dishwasher must stop in middle of rinse cycle because the dishes always feel filmy and there is an inch or two of water in bottom. Must be bailed out by hand. Piece of garbage. Called Whirlpool and they can get us a service man from 8-4 (who waits an entire day these days) on New Years Eve. Next appointment is following week to examine and will fix (if it is their fault and for a fee). The last two dishwashers I purchased lasted 10 and 7 years respectively. Stay away if you dont want bad equipment, uncooperative service, and aggravation. Range I bought was OK but the oven temperature is always off 10-15 degrees from what it says it is. I honestly wanted to buy American but I feel cheated. Next time Ill try Samsung and see if they give a damn.

A 12 year old built in double convection oven that has a retail cost of $4500.00 has its control pad discontinued. I cannot repair my investment. I spoke to the executive offices & they arrogantly told me that they only have to make parts for the length of the warranty. Suppose you had a 12 year old Honda that they discontinued a critical part would you feel swindled, I asked. We dont make cars was the response from the executive customer care agent. ARROGANCE How to destroy a company one customer at a time.

I submitted a complaint several days ago about my 3-year old Whirlpool Duet washer not working and costing $550 to fix. I decided to just replace it so my husband unhooked it this morning. We were going to to try to sell it on Craigslist as is. I pulled out the laundry detergent compartment to clean it because I had filled it with detergent and fabric softener the other day. The smell that came from inside the washer where the detergent is dispensed was awful. I looked inside and it was completely filled with mold. I had periodically run the clean cycle with bleach but apparently this did nothing. I am writing this second review to warn people about this. I am going to just trash the washer now and I hope this has not affected our health in any way. For those of you who are thinking about purchasing this washer or one similar, I strongly urge you to stick with the plain old top loader. That is what I am going back to.

My Whirlpool stove works really well, and it is self cleaning. I have had my present oven/stove combo now for 5 years and had not had one single mishap at all. I am so confident that you will like it I am personally recommending it. It bakes beautifully and if there is a spill or overflow in the oven I just press a button & it cleans itself!

Havent had any issues with it. Works great but does end up off balanced quite easily and halfway across the garage. Washes clothes like a maid. Is kinda small for bedding.

I just bought a new dishwasher because my 5-year-old one went out, model number DU1145XTPBA. After pulling the old one out, I took the motor out and lo and behold, what did I find but bad bearings. The motor was fine, just the bearings were rusted out and were jamming the motor so that it wouldnt move. The price of a new motor, $149.00. Well thats a bit much for something that only lasts 5 years. I went on eBay and found them for $70 to $170.00. So if you have a problem where your dish wont wash at all but fills up with water, it may be nothing more than cheap bearings in the motor. If I, myself, were this companys CEO i would really consider changing companies that they have making these motors or at least the bearings. Just wanted you to know that this is the only problem I have had with this one and Im going to replace the motor now that I know what it is. Thank you Whirlpool for a day spending repairing and replacing one of your dishwashers. I learned a lot.

The first day I set foot in IKEA changed my life, innovative and sensible and affordable. Some years later I had the opportunity to remodel a kitchen and I immediately thought of IKEA. I used their online planner, researched the appliances and knew that they were made by Whirlpool and that they offered a kitchen package discount if I bought 3 or more appliances with all the cabinetry. So I hurriedly designed the entire kitchen from top to bottom with IKEA.Included in the design was my center piece, my 5 burner Praktfull Pro Gas/Convection oven range with stainless steel backsplash and top of the line hood fan, basically a thing of beauty! I loved it and I visited the store several times to look at it. I finally bought everything, and installed it. Absolutely the most beautiful kitchen in the world.We have a historic building and were on several historic tours, interviewed for the newspaper, our kitchen was the highlight of the tour. My gas range drew oooos and awwws. The range is an exceptional appliance, beautiful and amazingly efficient, easy to clean…I was in love. Then one day it happened, the love affair was quickly over, devastatingly over. The door fell off the oven and the hinge broke! Yes you heard me right, it fell off, but that is not the worst part. It appears that not only are there no parts to fix it… there IS no fix for it, period. The door fell off because it had been glued on!!! Yes glued on. Whirlpool and IKEA had actually manufactured an appliance that failed in less than 4 years of use and no apparent intention to ever provide service or parts for it. This is criminal and they should be fined for their neglect of the customer, their calculated malfeasance and fraud to the customer.So my beautiful kitchen has a big black angry cavity in it and now I must try to find a new range that will fit in the opening left by this piece of junk and also pay probably over $2,000 to $4,000 for it. Most of all I am heart broken, mad and distrustful of anything IKEA in the future. Oh and by the way, my entire house is IKEA, my living room, my patio, my bedroom (s), my library, my office! Ive spent thousands and thousands of dollars at IKEA. No more! THE FINAL INSULT: Ironically…. my kitchen was featured on the IKEA website!!!

I have had my fridge (model WRX735SDHZ02) for 6 months now and it has never worked properly. All our food was getting frozen so we bought a thermometer to check the temperature inside the fridge and it was showing around 22F. The technician came 4 times and finally said that the fridge couldnt be fixed. He asked me to call Whirlpool since there was nothing else he could do. Every time I have called Whirlpool (6 times already) the wait times have been between 52 minutes to almost 1.5 hours. When I called customer service to tell them the technician said the fridge cant be fixed, Whirlpool said that I had to contact the technician again and schedule another visit. Whirlpool said the technician had to call them from MY home and tell them the fridge cant be fixed. I asked why couldnt the technician just call them now to let them know and why did I have to schedule another visit for that? Whirlpool said it was protocol. Makes absolutely no sense. In a nutshell, its been 6 months and my fridge is still not fixed and Whirlpool is not being helpful. If I could go back I would not buy Whirlpool.

The refrigerator fits perfect in my space, keeps frozen (ice cream is creamy not a frozen block ) and cooled foods well. I love the glass shelves. I purchased 2 more bins for the refrigerator door, now I can get all my spices and condiments on the door as well as lots of other things. The freezer has racks instead of glass shelves. The top shelf is adjustable, that is nice in order to use more space. I love the ice and water on the outside of the door.

I bought a Whirlpool dishwasher in 2008 from Best Buy and purchased the extended warranty through Best Buy. First of all, my complaint is not with Best Buy (model # DU1145XTPBA). I have had nothing but trouble with the unit not filling with water, being noisy, and other problems. And then, my intelligence is insulted by these independent contractors, who are supposed to be appliance repair specialists. I found that far from the truth in most cases. They have a list of patented things that the consumer is doing wrong: not having a hot water heater next to the unit, using too much detergent, not loading it properly, and on and on. They must think we are idiots. I always would run the water from the sink till it got hot before filling. And I am a miser so I use less detergent than what the manufacturer or the detergent package says. Anyway to make a long tale short, it started leaking last week, so I assumed the door seal or some other such thing. But lo and behold, the door is rotted out at the bottom. The black finish has bubbled up and the metal is actually rotting away. I am from up north and it looks like my old Chevy 2 Nova rotted out. I called Whirlpool and spoke with several people and supposedly someone in management. They were, of course, sympathetic but offered no assistance or explanation. They offered to send a factory authorized repairman to replace the door at more than the cost of a new dishwasher. Are we that stupid? They never offered me a voucher for a discount on a new unit, which I am going to have to buy. I would not have accepted it anyway, as my last few experiences with Whirlpool have been dreadful. I will never buy another Whirlpool anything. The name used to stand for a quality product that you could depend on. But now it is like most things are offered to the consumer in this throw away society. And as long as we keep buying inferior products and only expecting them to last a few years, I am afraid that is what we will continue to get. Be vocal and let them know how you feel, even though they are probably yawning on the other side of the phone. They are without compassion and could not care any less. They are just looking for a paycheck and have probably heard a hundred complaints like mine, so its water off the proverbial ducks back. But when its their own job in jeopardy, perhaps they will start passing on these complaints to someone who will be willing to listen. Its a very bad experience and I will never buy Whirlpool again.

My refrigerator is a side by side and its freezer compartment is small (width). Whirlpool is always my brand of choice for household appliances. I personally would not choose the side by side design again but I would choose Whirlpool.

Purchased a Whirlpool Cabrio 4 years ago. It worked fine until last October when I had to call a Repair Service as all the Digital Controls would not work. It was the Digital Board had to be replaced at a cost of $ 315.00. That was October 2016 and in October of this year 2017 it started doing the same thing again. I call the Repair Service and they told me not to waste any more money on this machine as it is a piece of junk. I guess he was right as when I read all the bad reviews it got today, I realize I will be better off to buy another machine. It will not be a Whirlpool product. I purchased a Sears Kenmore Washer & Dryer back in 1995 and the washer lasted 20 years and I still have the dryer. This is what you refer to as a good product.

I replaced our old Whirlpool washer that we had for 10 years with a new Whirlpool high-efficiency front load washer in August 2020 - it quit working on December 11, 2020. Got a repair person through Whirlpool on December 22nd who said I need a new motherboard. I am still waiting!!! 42 days with no washer and Whirlpool has no answers regarding the parts arrival and I can’t even sell the thing and get another brand because it doesn’t work! I’m beyond angry!!

This washer is poorly designed. Less then one year old and always has problems. I dont feel it cleans the closes. Does not always spin them. The load and go is a joke - had a service call because it would lock up - was told load and go does not work and not to use it - the washer was only a few months old. Now it will not even turn on!!!! - All other appliances work in the outlet - it does not respond. I will not even wash by good clothes in it - I take them to my daughters Samsung. I am in my sixtys and this is the worse washer I have ever owned, DO NOT PURCHASE.

New water making loud pinging noises when burner shut off. Whirlpool referred plumber. Plumber stated this is normal. After few months heater would make loud humming noise when burner turned on. Called Whirlpool again. Said I had to pay for plumber to troubleshoot and if part needed I had to pay labor to replace part. Would never recommend this product to anybody.

We purchased Whirlpool Oasis. The top loader washer and dryer 5 years ago from Sears. Both are scrap now. Paid high end money for these. Tub was changed on washer 2 years after purchased. Now looks like electrical control panel is gone. Oh well, Sears not really the problem because Whirlpool holds the monopoly on appliances. They are made to fail. Watch marketplace or W5 shows the tech men tell the story... You want to get screwed, buy a whirlpool. Hell I did.

Bought a Whirlpool 25 cu ft side by side in 2011 and now just 4 years later the compressor is bad. Called them and they only have a 1 year warranty, which is nothing for a compressor. They told me for $350 they could replace it and it be good for only a year. Not going to sink more money into a product even the company has no confidence in. The repairman advised to stay away from Whirlpool as they were not the company they used to be. Also the salesman at Lowes where it came from said they used to have a 5 year warranty but changed several years ago and the quality also went down. We have had refrigerators last 25 to 30 years in the past but no more thanks to modern technology. Thanks a lot. STAY AWAY FROM WHIRLPOOL!

I will never buy a Whirlpool product of any kind. I bought a gas stove and its a piece of **. Won’t even light. Only way to start it is start boil then switch over to bake then it wont light. So please I ask that you make a product thats worth buying.

On 5/3/16 I purchased an Amana high-efficiency, low water, top loading washer. What a joke, it is a piece of junk. There is no water so clothes dont come clean, and if you leave money in the pockets no worries. As it will be right there after the clothes are washed and dried (got matching dyer also). They dont even smell clean after two washing. And now you are to purchase a cleaner to clean your washing machine. This is truly not an efficient machine in any way.

Whirlpool Cabrio Platinum Washer - I have a 2 1/2 year old washer that has been serviced twice. This week 10/2/14 the service technician informed me that we had a bad tub bearing. The bearing failure caused a leak which corroded the rotor & stator. It was more cost effective to buy a new washer than to repair our unit!!!! Ive never heard of a washing machine needing to be totally replaced after 2 1/2 years. Any ideas how to deal with Whirlpool?

My son purchased a Whirlpool Cabrio washing machine about two years ago and now it doesnt work. It was an almost $1,000 machine. You would expect a higher quality product. I always bought Whirlpool products because they were so dependable so I recommended my son to go with Whirlpool. Big mistake, the panel lights up but when you press the power button, nothing happens. I do not recommend this machine to anyone. Im wondering if anyone else that has purchased this has had the same trouble.

We bought our washer (Whirlpool Cabrio) from a rent to own company about 2 years ago, and finally got it paid off. About a week ago, the lid started sticking when it was done washing. I went to open it last night to start some laundry, and it BROKE. Now theres a piece stuck in the bottom part of the lock, and the washer wont start. Anyone else have this issue?

I am very happy with my Whirlpool appliance- oven. Ive had it for almost 5 years, with hardly any issues. -Its very user-friendly when I need to program any cooking instructions. Both the elements & the actual oven cook everything to a perfect.

Whirlpool Cabrio 8kg washing machine - Purchased this washing machine because of the size, water efficiency, no agitator. Have purchased Whirlpool products before and havent had a problem but this washing machine is absolutely a piece of garbage. At first our water bill was hugely excessive so tested the machine and it was using 269 litres per wash when it was only supposed to use 98 litre as stated on the machine. When doing 2 washes a day you can imagine the water bill we had. Lint on washing, continually out of balance no matter how much was in the wash. Had it fixed under warranty then just out of warranty. Water wouldnt turn off. Had to turn it on and off at the top lid. Could now be opened during washing cycle. Started turning itself on in the middle of the night and day. Had to unplug it to stop it, wont spin out clothes. Still sodden. After cycle finished with the lid open it would start to fill up with water again and going out of balance again. Had the appliance people out for the 4th time. Had to have the motherboard and a valve replaced. Its still leaving lint. Washing is not even getting wet so it cant possibly be cleaned. Contacted warranty people. They came out and said it is running as it should be but they advised us this is a common problem with this brand of washing machine. Personally I wish I could throw it away if I had another $900 to waste on another machine.

Pulled a track home water heater out to replace with a Whirlpool 12 year smart heater. Well within 4 years with tank flush every year the water coming out of my hot water tap looks like mud. We have whole house water filters and when you drain the sink there is a layer of rust. I called and asked them what I should do and they told me to flush it with apple vinegar. Did this but a week later it was back. Called again and was told to do it three times with apple vinegar. There was nothing about this in the care manual about apple vinegar. I will never buy Whirlpool again NEVER!

After almost 10 years, my Whirlpool top loader is now malfunctioning just like a lot of complaints here. It will not complete a wash because it keeps giving an off balance error at the spin cycle. I also had a coin get stuck in the discharge hose but fortunately it did not destroy the pump. I certainly dont want to sink any money into a repair especially because the techs dont seem to know how to fix the off balance problem. Im not much satisfied with my Whirlpool dryer either. It takes forever to dry a load.

Purchased this refrigerator in 7/2017. I cant stand it. Its pretty and works, but the NOISE!! I bought a white noise machine and placed it on the countertop next to the refrigerator just to drown out the noise (very high pitched sound). Repairmen came out twice. A part was replaced, but nothing changed. Said have to live with it. Dont buy Whirlpool or youll go crazy listening to this all day, especially with an open concept home. You can hear it everywhere!

I purchased a high-end Whirlpool dishwasher (WDT710PAYM) a few months ago thinking I was making a wise upgrade. Poor design and it wont dry dishes or properly wash utensils when theyre placed in the utensil rack on the door panel. The unit heavily condenses after using heat dry mode and large water droplets completely cover the top of the inside cabinet. Eventually, they all fall down into the dishes and you now have wet dishes again. The Whirlpool tech’s response was to scratch the cabinet plastic with a scratchy pad, smear rinse aid over the plastic cabinet and that should stop droplets from forming. Whirlpool’s customer service told me they shouldve never told me that and what I should do is be there during the drying cycle and open the cabinet door to let the steam out. This is completely ludicrous. Dont walk but run away from Whirlpool products.

Whirlpool Cabrio Washing Machine F1 code - We have had this washing machine for over 6 years now, and ever since our 3 year warranty time was up, the washing machine will only stop, and display the F1 code as soon as the wash cycle has completed, with 23 minutes left. To start off, with this problem, it is causing me more water, and electricity that should not have to be wasted if the machine worked properly. I called the place where I got the machine, and was told to give Whirlpool a call. I did this, and was told that there was nothing that could be done, and if I would like to schedule an appointment for a tech to come out and work on it, they could do that. YES, I would have to pay for it. Needless to say, the washer has been doing this for over 6 years, and if there is a way to get it fixed WITHOUT having to pay for the repairs, that would be wonderful.

I purchased a brand new Whirlpool Cabrio washer and dryer set not even 2 years prior. When I first started using it, I pulled shirts out of the wash after being ran through and found deodorant marks still on the inside of the shirts. I had to wash all of my loads on heavy soil and still had to run some loads through more than once. The wash machine quit working about 1 month ago, so I had a service man out to look at it. It ended up being the control panel and the part itself was going to cost me $300 and by the time I paid to have it repaired, the total cost was just under $400. The service man proceeded to tell me that Whirlpool had another company actually make the control panels for the Cabrio model and he has serviced several of these washers and when he would repair one part, another part would stop working. I was very upset and bought a new wash machine. I would like to add, I am a single mom with a 2 1/2 year old, so the wash machine was not used excessively in any way. I dont work outside so my clothes are never soiled heavily. Needless to say, my washer was not under warranty so Whirlpool couldnt do anything for me. A wash machine should last longer than less than 2 years. I would not recommend this model to anyone. And for Whirlpool to put their name on such a poor product is very disappointing since I have had good experiences with their products in the past.

The home I bought a few years ago, had brand new Whirlpool appliances. The oven and range, work great, although it does take my oven seems like a long time to get to temperature. The size of the oven is great, has plenty of room to cook lots and/or large amounts. The range, works really good too. Its a glass top range. The glass is very durable, I find it does not scratch easily. Cleans up well by just using a good glass top cleaner. I do have one of the burners, does make a little noise if used but 4 years in, no issues out of the range or oven.

This refrigerator was already part of the appliance package that came with the property. I dont think if I had a choice, I would choose this brand. The stainless steel finish has rust spots, the top shelf has cracked and it is less that 5 years old.

I have a double oven. The bottom oven takes a long time to warm up. Good oven overall. I would definitely recommend this oven. The timer functions seem to work well and it is self cleaning as well.

We purchased a Whirlpool Duet Sport Front-Loading washing machine December 5, 2006. Approximately six months later, the machine would not come on! Service determined the motherboard was faulty. Since it was under warranty, they replaced it. We continued to have the same issue with turning the machine on. The technician instructed us to hold the start button down for a minute or unplug the machine to reset it. The problem persisted. Now, we are told it needs yet another motherboard. Cost - $500! We paid about $650 for the machine! (The manufacturer only offers a one year warranty on the motherboard) What incentive do I have to purchase this part? After all, Whirlpool only warranties it for a year! That in itself, tells me they cant guarantee the quality of their product.

I bought my house in 2009, and the previous owner bought this refrigerator in 2005. By 2012 The light and temperature read out went out. A circuit board had to be replaced. I have a home service company that I pay for yearly which takes care of the appliances. As usual, the fine print on the back of the contract said circuit boards were not covered. When I went online to purchase the part, the cheapest I could find it was $180. My service company said they would not cover it because they break down so frequently, with Whirlpool as the biggest offender. They gave me a discount and charged me $125 for the replacement. Whirlpool is making a fortune on these defective parts, which last long enough during the warranty period, and then you are on your own.In 2015, after the refrigerator was 10 years old, the compressor died. Hundreds of dollars of food spoiled. My service company said I was covered for the replacement, but I would have to wait 5-7 days for the part to come in. I was so furious that a refrigerator of this age would break down on me. The repairman told me he has seen these Whirlpools break down after 5 years. He said they are junk. When I was young, we moved into a new 20 story building in 1963. All the apartments had the same refrigerator made by Frigidaire. I lived there for 26 years. When I moved out in 1989, that refrigerator was still there working perfectly. It never needed a repair. I never heard anyone complain about theirs either. How is it that in 1963 a company could build a workhorse of a refrigerator, but in 2005, Whirlpool, a company in business since about 1911 makes this junk? I will never buy a Whirlpool product, and will tell the world not to do so as well.

I bought my first Cabrio set in 2008 to replace Maytags that lasted forever but looked their age on the outside. No problem with cleaning and drying, just wanted something new. What a mistake! I looked in Consumer Report Guide to pick and found the Cabrio set. Had problems after the first 4 months - UL uneven load codes flashing up, and had to replace suspensions and bearings, boards, etc. Unfortunately within that 4 months I bought another Cabrio set to put in my vacation home. Started with the same issues and really hard to get a service technician to come out because of where we were located. Customer service with Whirlpool sucks as well as Sears service. It is AMAZING to me that Whirlpool will NOT stand behind this product. I am writing this as I see an F1 code flashing on my washer here at my second home. I have a load of towels in it and house guests arriving in the morning! I will be trashing this washer and dryer and finding something old school and reliable. I want no bells and whistles, just clean and dry clothes. Whirlpool, you should be ashamed.

I purchased our brand new double ovens on 9/27/11. I was happy until 11/3/11 when the inside glass exploded, shooting shards of it all over our kitchen during the self-cleaning cycle. I immediately called Kitchen Aides corporate office in Michigan. She said that she could send a technician out to access the damages but didnt see that this was a product issue. Like I dont know how to properly push buttons to self clean! The technician came out the next day and said that he was only authorized to replace the glass, nothing else. He couldnt tell me why it shattered, he thought perhaps there was a bubble in the glass during manufacturing. I said I think it needs a whole new door at the very least, but more likely a new unit. I just paid $3000 for what will be a refurbished oven after one month of use. Today, I called once again to tell them that I am not satisfied with new glass, not to mention my oven is unusable in its current state and still has glass sipping out. I spoke to a woman in their safety committee department, who told me that Whirlpools warranty is replacement of broken parts, nothing more, and since only one pane of glass broke and not the door physically, they couldnt authorize a new door or new oven. Mind you, that we still dont know why it broke, was it just faulty glass or could it be a heating problem? She didnt care, only that they could only repair the glass. I asked if the glass could be overnighted since I have been without an oven for four days now. She said that she had no way of doing that, so I asked if I could speak to the parts department and she said I could not, that only techs could contact them. I asked if she could do anything for me? Could she assure me that it would be fixed within the week? No. Could she assure me that it would be fixed by Thanksgiving? No. Whirlpools policy clearly is that once you purchase their products, they have no intentions of listening to their customers complaints or concerns only to do the very minimum required.

I was very excited about the performance of the washer as far as reduced water usage and reduced electric usage. After about 6 months though, I couldnt figure out why a lot of clothes, sheets and drapes came out with streaks on them. Very expensive to replace! Of course, the business I bought them from tried to get me to buy all types of fixes that had nothing to do with the problem and therefore couldnt answer me why this was happening. I am not crazy about a lengthy lawsuit. I am crazy about hoping the washer dies so I can go back to a less fancy washer that did the job better than this expensive monster!

Maybe they make some higher end ovens but ours was not one of them. The oven light fixture works intermittently and its only been 8 months that we have had it. The insulation on the oven is lacking as well. You can turn the oven off at 450 and within 15 mins its already below 200.

Right from the start of buying a new suite of Whirlpool appliances, the light over the range burnt out. We figured it was just a bad bulb so we replaced it. Soon it burnt out again, replaced it again, then again it burnt out. I finally called Whirlpool about the problem and found out it is the electronic panel that needs to be replaced... Of course at a full charge to me! I am so over WhirlPoo, (yes I spelled it that way on purpose) every single appliance has had issues. I have just lived without a light over my range because fixing it is more expensive than buying a whole new microwave. Never again will I buy any WhirlPoo appliance!

I purchased my Whirlpool Gold Series refrigerator from Lowe’s in Rockledge, FL. This was my third purchase after returning an LG Refrigerator as well as a Samsung refrigerator for having multiple defects! My Whirlpool Refrigerator purchased June 2014 has motherboard replaced that showed obvious evidence of factory board flaws when boards were manufactured. Top mounted ice maker drips so much water it fills my veggie draws with water ruining my food. Mold is present inside my ref now from constant leaks. Drawers were replaced by tech also due to ill-fitting design during first few months. Water will not dispense in door after one year, gave up using it. This is a horrible and very expensive appliance wrought with POOR DESIGN FLAWS. WHIRLPOOL does not care about its consumers. Their engineers must be some of the worst in the world. Our old 70-year-old kerosene powered refer in the Bahamas is still making ice, yet most modern day refs are like buying cheap home computers that constantly need service to keep them running. It’s a lifetime investment with $89 first service visit to determine problems then weeks of waiting for parts and second visit for the repair to be completed until next electronic malfunction. DONT BUY A NEW WHIRLPOOL APPLIANCE. WAIT AS LONG AS YOU CAN FOR ALL THE CLASS ACTION LAWSUITS AGAINST WHIRLPOOL & Kitchenaid to play out.

I have had the same lid problem with our washer. New in 2010. The lid just broke in the same place for the 3rd time! Called Whirlpool customer service. Yes they can find my account. No, they dont have a record of this happening to this washer before. Even though I called them and got the lids through them two other times!!! But they will be happy to send me a new lid for $260!!! Also love the fact that they dont acknowledge the lid is a problem. Time to find a new washer that isnt Whirlpool!!

We purchased this machine new less than 6 months ago. We found that it is not cleaning our jeans. We cant even work cattle and get our jeans clean. I called Sears and Whirlpool and told them it does not clean our jeans. They said it was under warranty and that they would come out to see if it was working properly. Well they said it was and then sent us a bill for $77. They said Customer Instruct was not covered under warranty. I already read the instructions and I knew how to operate this machine. The technician said this is not the first time he has had this type of complaint. Anyway I am VERY dissatisfied with this washing machine and I want Sears and Whirlpool to take it back and give me a better machine. I want one that can get clothes clean. If you are satisfied with dirty clothes then I guess you will like this machine.

My washer is at least 15 years old. When we bought it we had two school aged children at home. My husband and I now have an empty-nest and we have not had any service calls or break downs since we purchased this machine. It still cleans our laundry very well and we are getting our moneys worth from this washer.

A new washer, kept in pristine condition, indoors in an upstairs laundry room, used by 1 person for 4 years should NOT rust out. I took pictures and sent them to Julia ** a company representative after she offered me a discount on a new washer but would not send me an email with directions like it was some kind of secret until I insisted several times. The email simply had her phone number. I was to let her know the models I would be interested in and she would tell me if those were available for the discount. Then the company would charge me, deliver the new one and charge me to install and remove the old one. How is this for a great company. I sent her the models I might consider. No word back. Whirlpool, not looking like a stand-up company to be proud of. Shame on this company.I like the machine, but seeing it rust out before my very eyes has changed my mind. How will they address a 4 year old washer rusting from the inside out? How will they address a 1 year warranty? I found a copy of Whirlpool Washer Warranty that used to have up to five years for issues such as poor workmanship. It takes more than a year to find these things out. Dont make them if you cant guarantee that they will last. My last Maytag lasted 18 years and was still in good shape. I just wanted a model without the agitator in the middle and on that would conserve water. Should have kept the old one.

I purchased a Whirlpool Cabrio washer and dryer from a local appliance center. Everything was working great. After some time, the washer began to have error codes. I would have to turn it off and restart using more detergent, more water and more electricity to attempt to get a load washed. I did purchase an extended warranty. I reported the issue to Whirlpool and I have had 7 home repair visits while still under Whirlpools warranty. The first time, the repair tech went under the washer and tightened a screw. REALLY! The next visit, the motherboard was changed and the issues kept coming back. Well, the Whirlpool warranty was now over so the extended warranty had to be picked up from the appliance center. Things got worse and had continued repair calls. After I had enough, I called Whirlpool and spoke to everyone under the sun. I tossed it outside and bought another brand washer. Several weeks went by and this washer still under the shed, Whirlpool contacted me and bought back my washer, GREAT.Now, here it starts all over again with the dryer, same issues with motherboard. Only this time, I am 1 month out of Whirlpool warranty and need $385 for a new motherboard plus cost to replace. I call Whirlpool again but only this time, they show no issues with this dryer and are not budging. I toss it out and again, purchase another brand dryer. I grew more angry by the day looking at this dryer sitting useless outside. I had it hauled off as trash. My question is how does a consumer protect themselves against these manufacturers? I do understand warranties but if it smells like a lemon, acts like a lemon, it must be a lemon!

I purchased at Lowes and they say was without warranty. I have had all kinds of trouble. The pilot light was replaced in the burner easily because of recall. Now the pilot will not stay lighted unless you tap on the gas valve. Then as soon as the water temperature comes up, the burner and the pilot light go out. I went to Lowes for a new gas valve. They have one for natural gas of $58. They do not stock for propane. I have to purchase from Whirlpool which costs $228. Their comment is that it is more expensive to build another. They do not change offices any longer because of PSi difference bull crap. I purchased a Whirlpool gas stove 2 to 3 years ago and I had to purchase an LP change over kit to use it. This is nothing but a case price extortion. I will never purchase another Whirlpool product again and I would advise no one else either!

We bought the Whirlpool water heater and not long after, it quit heating. After many phone calls, we finally got a response and were told to get the replacement thermocouple. We did this and it was the wrong part. We found out that we had to have a right hand thread thermocouple. Now, the heater is out of warranty and we cannot keep it lit at all. It takes at least 3-4 times before it will light once and then it goes out every time the hot water is used.

Am posting in regards to a brand new dishwasher that I purchased the first part of February 2020 from Menards. The dishwasher I bought is Model # WDT730PAHB and Serial # F94519386. I had the dishwasher 10 days and it stopped working after running only two times. I checked the breaker box and all electrical connections to the machine and it was getting electricity, but would not turn on at all. I called the store to return it and they only have a 7 day return policy. Since then Whirlpool has been contacted and I have had two service calls from Whirlpool. The mother board has been replaced (which I waited two weeks for the part & five hours for a service man) and still it will not come on. Now I am waiting on a wire harness, ordered on March 4th or 5th and still not here. I completely understand wanting to fix a broken machine, however this was a new dishwasher that only worked for 2 washes. I have now been without a dishwasher for almost 2 months, which in light if our current world situation isnt a huge deal, however this is a time when sanitation is very important. I feel like Whirlpool should offer to replace my new machine with a new machine and not something that is refurbished. At this point it is costing more to repair this machine than to just replace it. Every time I call Whirlpool I get the line of we have to repair it. Give me a break. Take care of your customers!!?? #neverbuyawhirpoolproduct

Ive replaced my ceramic stove top twice. First time it was my fault, I dropped something on it. But last week I was the only one home, stove was off and I wasnt even in the room. I heard a bang, went and looked around. Saw nothing. But when I went to prepare dinner.... shock, the entire stove surface was shattered!!! Now at over $600.00 to replace it I AM NOT HAPPY!!!

My new fridge is extremely hard to open. The technician that was sent out told me that there is too much suction building up inside the fridge and freezer and that is why it has to be yanked to open. This is not only annoying it means the fridge is constantly being pulled forward out of place. Technicians solution was to deactive the castors under the fridge. At the time he was here I did not realize that I could then no longer move the fridge out of its place to clean. I called Whirlpool and complained and was told that they could do nothing more for me because the fridge is in good working order. I hardly would call this good working order. They also informed me that if I wished to clean under the fridge or the coils at the back it would require a service call to move the fridge and I WOULD BE CHARGED EACH TIME. Needless to say I AM VERY, VERY UNHAPPY WITH THE WHOLE SITUATION.