We just wanted a black, good looking microwave, so far so good. It been easy to keep clean and cooks food fast. We actually installed it ourselves and it was pretty easy. It hasnt broken down or given us any struggles.

The oven was brand new and the computer went out with the warranty. Replacing the computer, with labor, was as expensive as the range. I have owned several similar ranges made by other brands and have had no major complaints. However, I will never purchase another Whirlpool product again!

In May 2010, I purchased a Whirlpool WFW9750WW front load washing machine. In October 2010, the machine started making a strange noise and by December 2010, the machine sounded like a jet airplane. I called Whirlpool warranty and they sent out the appliance doctor. They looked at it and said that the bearings were shot and needed an inner basket, outer basket and one other item. They would order it and come back in a week or so. We were told not to use our machine. Ten days later, I called to check repair status and they said that the items were on back order until late January. I called Whirlpool and after several conversations and going to the second level of supervisor over a week time frame, they finally located the part and shipped it. However, it was not until the end of January 2011 (seven weeks after my call for service) that the part arrived and was installed. The sound was never right after the repair. The appliance doctor came out and told me that all washers are loud. In December 2011, the jet airplane sound returned. I called Whirlpool but I was now out of warranty. Luckily, I bought the extended warranty through Lowes. They sent out Night Owl on February 9th 2012. They diagnosed the same problem with the bearings and said they would order the parts. I called Night Owl on February 17th to check on status and they said that the parts were ordered. I called to check status again today and now the parts are on back order (same as last time) until sometime in March. Night Owl turned claim over to check on getting the machine replaced rather than repaired. I was told that this would be another five days. Its amazing how there are no parts available. I was told the repair cost for this item is over $450 as it takes two repairmen about two to three hours to complete. Issue is still not resolved. I highly recommend not buying a similar washing machine. Whirlpools product, warranty and customer service suck.

Just bought the Whirlpool 3.5 cu ft, Top Load HE washer (model WTW4815EW), but of course, the sales person did not explain that HE meant LOW WATER USAGE. Wish I had done my homework. FIRST LOAD, clothes seem to be beaten to death, and must pour in detergent before you load clothes. So, Oxyclean detergent I always used in my regular (NOT HE) washer put a hole in one towel and discolored (faded out) the others. Also seems that the fast and hard agitator would not (logically) last very long. It seems to be working very hard. Im SO disappointed. Called Whirlpool to say I dont like it. They said to call Home Depot and see what they will do about an exchange. When I did, my sales person said that almost all the washers he sells are HE. I want the old type washer back that allows me to add more water if I want, change the cycle and water levels at my discretion, add detergent when I want to, and soak clothes if I wish.

I bought a range on 2/11/11. On 2/14/12, I cleaned the oven for the first time at high temperature and noticed burned grease marks which appeared at the inside of the glass in front of the oven. I called for service and the repairman took apart the door and cleaned it. He said it would probably happen again. There was a leakage somewhere and he couldnt repair it. I think it is a quality control problem at the manufacturing levels.

We have a Whirlpool range that was produced for Kenmore (Sears brand). It’s a glass top with electronic controls. Over the 13 years we have had this range we’ve had to replace the controls 3 times at a cost of over $300 each time. Each time we were under severe lightning storms and got hit with a surge. It would burn out the Control board. We finally got a whole house surge suppressor since a large device is required for 240 volt appliances. Also the glass top has gotten scored over the years. We would not recommend this oven and will likely replace it with an industrial gas stove with manual controls when this one dies or gets too expensive to repair.

This machine is 18 months old. First it failed to drain (LD code). Ran diagnostics and found the drain pump ($60) failed. The Mexican part was replaced with an Italian part. Two weeks later, the infamous F1 code flashed - control board. I sourced a new one. I ran one load and another F1 code is flashing. These are $150 electronic parts. Fuhgetaboutit. Im sending this ** to the dump and going back to electromechanical controls. I had a Maytag that lasted 15 years.

Very loud when in spin cycle, tub leaking out of the bottom. Bearing is shot. Only lasted about 3 years. It also knots up the laundry, does not remove dirt from soiled clothing.

We moved into our new condo a few months ago and my wife noticed that the knobs and front of our new Whirlpool Stove were getting too hot to touch so we called Whirlpool and since then never used stove. Was over one year old, we had to call their factor service representative. The charge was $98 plus labor $90 to tell us that even though the surfaces were way too hot to touch and dangerous to touch they were still within the factory specs of 167 degrees for the knobs, 152 degrees for the drawer, and 172 degrees for the front glass. He found the front of the unit reached 152 degrees which was hot enough to cause a serious burn when the stove was only set to 400 degrees. Why would a company set specs that will cause serious injuries? If my wife or grandchildren get burned by this crappy stove Whirlpool will be hearing from my lawyer. Stay away from any Aquaclean Whirlpool stove.

Home owner bought a whirlpool water heater from Lowes. After the first year, the pilot started going out frequently. Tenants were left with no hot water repeatedly over weekends, etc. Changed numerous thermo-couplers, cleaned the screen below, but it continued to happen. I’ve paid plumbers for several service calls, which amounts the cost in excess of the price of the water heater.

While my oven was running the 3 hour self clean cycle, the glass on the inside of the door cracked. It was in the middle of the cycle so I tried to call whirlpool to see if I should hit cancel or if it would cool too quickly and make it worse or what to do. First person was young and stumbled with English in the service department. He couldnt answer my question, just schedule for me to pay for service to come out. After I got upset and said there must be someone to talk to, he sent me to parts who said she can only order me parts. All I wanted to know was was if flames were going to shoot from the oven or what! I told her that I needed to talk to someone who knew something about ovens and she asked if I was calling her stupid and hung up on me!

Whirlpool Gold GC3SHAXVBOO - Two issues in two years. We purchased this refrigerator online through Whirlpool in April 2010. Almost a year later, a circuit board went. This was repaired under warranty. Our refrigerator was making loud cycling noises and we were told this was normal. Now a year later, again we have an issue. This time its the compressor. We called customer service and were told there is nothing they can do. The cost to fix approximately is $700. This is very upsetting to buy a $2000 refrigerator and have two major issues within two years and then not have the company stand by their product. I would wonder how many other people have this model and have these issues as it seems like a lot. Whirlpool customer service is terrible, non-caring and offered no assistance.

My husband and I purchased a Gold Series, French Door refrigerator/freezer in 2012. Everything was fine until our icemaker took a dump a few weeks ago. It had to be replaced. Taking time off from work to meet the repairman with that repair was an inconvenience but it was only magnified when we were told he would call us an hour before the repair, which never happened. We were given the usual 4 to 5 hour window in which we could expect a service call, which is the standard these days. But I had to rush home when he called because we never got that courtesy call an hour before. The repair, as frustrating as the situation was, was made and we thought that would be end of that for a while.Things were fine until today when I discovered puddles of water on our wood floor as I was leaving for work. While mopping things up with a paper towel and trying to determine what the problem was, I discovered a frozen puddle of ice on the floor of the freezer when I pulled it out. This situation, obviously, was more urgent than the last one we had a few weeks prior so we were hoping for a bit more than the Well have someone come out on the 20th response I was given. It was only after jumping through hoops like a trained monkey at the circus and raising my voice a few times out of frustration, did we get a call from the actual repairman who said he would be out within a couple of hours.By his own admission, the small rubber seal the repairman replaced somewhere in the refrigerator, was known by the manufacturer to be an inferior part. He told us they are well aware of the problems caused by this inferior seal and that they eventually need to be replaced with one that is of better quality. Apparently, its cheaper for them to use the inferior one, and they choose to disregard the inconvenience, not to mention the potential damage that could be caused to a persons home because of it.We have a great many concerns on a great many levels surrounding this product and the way we were treated as paying, extended warranty consumers. This refrigerator was a major purchase for us. We placed our confidence in a company and a product we thought we could trust; not to mention making the assumption that if we paid good money for an extended warranty, a problem like this most recent one would meet with more of an eager attempt at getting us the help we needed without having to become as insistent and frustrated as we were forced to be.How disappointing to discover that spending over $2,000 on a major purchase like this and then being told we would have to wait 3 to 5 days for a repair. Having to take time off from work, or being told to wait for up to 5 days for any sort of help to replace a small rubber seal, known to be of inferior quality, that was replaced in 10 minutes is absurd. Think twice before spending hard-earned money on this product!! The tragic lesson, however, in all of this is the verbal confirmation by the repairman that just about all manufacturers are the same when it comes to corporations trying to save $$$ and blowing off the inconvenience and expense of their customers.

Whirpool WFW9550WW-00 Front Load Washer - Washer was purchased 08/09/12. No problems until 07/12/15 when washer stopped working mid-cycle. Motor control board needs to be replaced, actuator needs to be replaced. $500+ Our local appliance store suggested we call the Whirlpool customer relations number and ask for the parts to be sent free of charge. We would pay labor. They gave us the model number, serial number, the diagnostic info. Long story short, customer service told me she didnt know why I was told to contact them. They can not predict the life of a machine. Less than 3 years for this machine. 22 years for my old Kenmore. Our old Kenmore never had a problem, but we thought that we should replace it in 2012 in case something happened with old machine. WISH WE KEPT THE 22 YEAR OLD KENMORE.

Purchased washer and dryer combo on 07-08-2013. I have a family of just 2 now. Under normal conditions I thought the machine should last 12 to 15 years. After 2 years of service the bearing and seal on the tub failed, I had to order parts and rent a tool to install. Then after 3 years had to replace suspension kit for the tub. Now after 3 1/2 years the water drain pump has failed and the sensor on the motor is acting up. This machine listed for $800. I did not purchase extended warranty but I have repaired myself. If I had not repaired myself the cost would have exceeded the cost of new. I have now purchased another makers model machine. I think Whirlpool should buy this machine back.

whirlpool Cabrio Washer - I replaced my front loading Duet with this, thinking I was done with front loader. Designs are set to fail, liked the idea of no agitator, thinking can clean a lot clothes at once, boy was I wrong, heavy loads wont spin dry, forget sheets or blankets. The machine just stops, leaving everything soaked and you basically screwed, you can invoke a spin cycle but to help make rinse and spin out, sooo disappointed. Whats wrong with the designers of this product? They didnt try sheets to see if it would even work. I am far from over loading this too. Dont buy this.

First of all, I did not want to give a rating of one. Your system forced me to. They do not even rate one star.In summary of the below, I did not fail to communicate from the moment we received our appliance and Whirlpool in short intentionally wasted time to let the warranty run out to avoid replacing a lemon of a dryer. Please read details below.We bought our new dryer (model WED9400SZ) on 10/24/10 with a one year service & parts warranty from Appliance Smart in Apple Valley, MN. In March 2010, we called in to Whirlpool customer service to relay our issues & to arrange for service & repair after a few months of noticing holes in our clothing (at first thinking it was the new Whirlpool washer making the holes).Although we purchased the unit in late October, we didnt use it for the first time until late November (1 month later) as we just bought our home & took four weeks to paint the entire home before moving in. Then on December 29, 2010, we left for a three week vacation to Mexico & again hadnt used the dryer during that time. Returning home, we started to use the new washer & dryer (in late January 2011) but had thought it was perhaps the washer making the holes & it took us until to March for Whirlpools preferred service repair providers to determine that the holes were coming from the dryer. I do not have a reference number to refer to for the complaints to Whirlpool as I was not provided one.They only always asked for our delivery address which is: xxxxx ****, Lakeville, MN.The issue of the dryer making noticeable holes in our clothing and in one instance chopped a sock completely in half (both pieces found within the dryer drum not stuck behind the drum or sucked into another area of the dryer) has been consistently ongoing and to date has not been fixed. On several occasions, I expressed my concern to Whirlpool customer service as well as to managers (because the case had been elevated to where they had managers and review boards looking at the problem more closely) as we were getting closer and closer to the warranty expiration and the dryer had not been fixed. Routinely, I was told that regardless of the warranty expiring, if its the same issue that persists and had not been resolved while within the warranty date, they would continue to honor the warranty by continuing to try to fix the problem or replace the unit at no additional cost to me if necessary.Whirlpool had escalated this repair issue (multiple times) to their review board and determined that the dryer was indeed repairable and continued to send out Twin City Appliance to repair it. Finally, just 23 days out of warranty, Whirlpool deemed the dryer should be replaced, but at the cost of a new machine $370 to us (which they somehow prorated to get that figure). We paid $399.98 plus tax for our supposedly new dryer so clearly this is an unexcitable resolution. In speaking to Rhonda this morning, she further prorated the new dryer replacement cost to $260 to include installation and another one year warranty and gave us until December 21, 2011 to take advantage of.This product never worked from day one (a lemon) and has caused roughly $400 in damage to our clothing (all photographed for proof). This has further resulted in me missing work to let in repairmen & and taking great amount of time to lay out out wet clothing around our house to air dry (again, all photographed. ) This has caused extreme stress for me in spending hours and hours on the phone with Whirlpool and repair people (cell phone records of dates & conversation length as proof). I have also developed great anxiety attacks in using our dryer, scared at the outcome of which of our clothing will be ruined. After having two different service repair companies (A&E Factory Service and Twin City Appliance, both in MN) at Whirlpools insistence come to our home on more than 10 occasions within the year warranty to determine the cause & try and repair the faulty machine, this proposed resolution by Whirlpool is absolutely unacceptable. It is important to me as a consumer the this issue is formally filed with a reputable institution (BBB). I feel we have no choice at this point but to contact our lawyer and take this issue up in the courts. Resolution proposed:I am seeking a replacement of our dryer at the equivalent or greater value than the model we purchased and a letter of apology from the CEO or equivalent position in their corporation as I want to know that this poor level of customer service provided by their company was indeed brought to their attention. I am also asking for $400 to replace our damaged clothing. When this goes to court if not resolved via the BBB, I will ask for pain and suffering damages as well.This has been an unbearable chapter for our family this year, one that has weighed heavy on us and caused great stress, anxiety and loss of money and time. I am in shock that a worldwide corporation with the longevity and commercial history and quality service that Whirlpool was known for cannot admit that this lemon we purchased is a (most likely) rare instance and step up to the plate and demonstrate integrity and show value for their customers by doing the right thing. Time after time their customer service reps promised I had nothing to worry about and that if the machine could not be fixed even if it fell out of warranty, they would take care of the replacement of fixing it at no additional cost to me.

We have had this water heater for less than 5 years. It was purchased new from Lowe’s. This is the second time we have had to replace the thermocouple and are told that we have to order the part from Whirlpool. Really? What do we do for hot water in the meantime? This is a very disappointing response from Whirlpool and Lowe’s. I will never again purchase anything from either company. We had to buy a new heater today, pay for installation and permits. This is a rip-off by Whirlpool and Lowe’s.

My comments are similar to all the other comments on here regarding the Whirlpool Cabrio washer: I bought a Whirlpool Cabrio 5 years ago and have been sorry every wash day since. I have to wash my clothes twice because the machine doesnt fill the tub with enough water to get the clothes clean. I have tried using the bulky setting for all loads to try to get the water level high enough to at least cover the clothes. This is a terrible design and the worst piece of junk. I will never buy a Whirlpool product again...

I had owned another Whirlpool Washer before, which died. I purchased this one. It was noisy and unreliable. Whereas the previous one lasted for 10 years, this one stopped working in less than 6. I went out and replaced it with a GE instead.

I purchased a new Whirlpool Cabrio washing machine from DeWaard & Bode at Bellingham, WA in January of 2007. The serial number is **** and the model number is ****. Several months ago, the dreaded F1 code appeared. The code initiates when the washing machine is started and must be cancelled and started 3 times to continue washing. Later, with approximately 19 minutes left in the cycle, the code reappears and requires canceling and restarting another 3 times, at times 4. I have no extended warranty so I have no coverage for repairs. I also dont want to pay for a service call for what is most likely the computer module as evidenced from the majority of complaints online. This washing machine still looks new and works other than the inconvenience of having to stand by when starting the cycle to reset the code and then having to run upstairs later to reset the machine when its partially through the cycle. At some point, it will likely quit operating all together. I have purchased several appliances over the years from DeWaard & Bode and will be replacing all kitchen appliances again next year due to a planned remodeling but at this time, I do not intend to get them locally due to this issue. I have reviewed several comments online and feel that Whirlpool has a real problem with this particular machine that they refuse to be responsible of. I was offered an extended service plan for 1 year at $132.01 or 3 years for $336.61 but Id have to wait to be allowed to utilize it due to existing circumstances. Im not sure if a fix is actually available. The local dealer did not offer any assistance.

They really dont make them like they use to, do they? This Whirlpool Cabrio aka Caprio has given us problems for the past 3 years, weve owned it for 5 years. It doesnt matter how much, or how little clothing you put in this washer machine. It will start going NUTS, Thudding, Banging against the inside of itself, completely out of whack, and then it will show a UL where the time is shown. Every time we do laundry this happens, and we have to stick our hands in the hot water and reorganize the clothes, and pull more and more clothes out till theres only about 3 items of clothing left! This washer is GARBAGE! I advise people to keep away from it. The washer we had in the past lasted us years upon years. These washers of now in days are Crap Garbage. Keep the fancy tech look, and give me the old fashion Knobs ANY DAY! Whirlpool brand is Not what it once was.

Purchased on 04-26, professionally installed on 04-29 into a clean, large, well-ventilated area within the garage. Has turned itself off every day since then. Flashes code 10, screen is dirty... Pull the burner and the screen is clean. Called Whirlpool. They tell me to clean it again, so I do. This goes on for weeks... I can now pull the screen and clean it with my eyes closed. I get up a half hour early every morning to complete my water heater re-lighting procedure so my family can take a warm shower!!! Whirlpool gives me a phone number to a repair company. They tell me the repair person will have parts on the truck. I wait four days, guy comes out and says, You need a control valve.... did they send it to you? So I had to call Whirlpool back and order the valve... three more days... Very next day after repair, the thing shuts itself off again! I call Whirlpool and they try and push me off to the repair company, saying they are now responsible for the repair, but in the same sentence the tech says the heater needs a burner assembly. Okay, so you know it needs a burner assembly, but you ask me to contact the repair company to come out and fix it knowing they DO NOT have the parts on the truck? Only after I change my tone and raise my voice does she offer to send the part ahead of the repair appointment! In my opinion, Whirlpool has reached the top of a list shared by other mega companies like Bank of America and Time Warner Cable... Too bad the accolade is for the worst product and customer service. DO NOT BUY Whirlpool.

My wife and I bought a Whirlpool Cabrio washer and dryer set in 2011 and now the washer has an error code of F7 E5. I spoke with an appliance guy and he says that it is going to cost up to $450 to repair it. The wash cycle does nothing, it just sits there and then it goes to the next cycle. I have grown up in a household that had washing machines that lasted many years. This is a joke. Why am I having to buy a new washer in 3 years? I dont understand. Whirlpool knows that this is a problem and they should step up and do a recall or some kind of discount towards a new machine. This is ridiculous.

Worst purchase I have ever made. When I purchased this Cabrio washer in 2015, I didnt find bad reviews but how I wish I had. This washer does not clean clothes well. It has caused holes in clothing and towels. Often all the load wont even be damp even if using the deep water feature. The wash loads rarely fill more than couple of inches. Clothes come out twisted and terribly wrinkled. Sheets and blankets will be half dry and unclean. TERRIBLE APPLIANCE. WOULD NOT RECOMMEND. Now I am stuck with a high priced washer I wouldnt even feel good about giving away. WONT FILL. RUINS CLOTHES. TANGLES LOADS. DOESNT CLEAN. DOESNT RINSE PROPERLY. DO NOT BUY!

Every appliance Ive ever owned has been a Whirlpool product. I am on my second set of Cabrio washers and dryers. I havent had any issues with the dryers, but the washers are a different story. My first washer, bought in 2008, started throwing water and oil underneath while spinning. A service technician came out... I had to have the entire tub replaced seeing as how the bearings that went bad were in the motor/spinning assembly that was built into the tub. I moved in 2011 and needed another washer and dryer. I was told the problem had been addressed. Now Im having the same problem... the washer is so loud when spinning, you can hear it on the opposite end of the house with doors closed! So the bearing problem has NOT BEEN ADDRESSED!!! Whirlpool will not stand by this product!! Loyalty is not a factor in their assistance... Only profit!!!

I am getting numerous F1 codes on my Whirlpool Cabrio washing machine, Model #WTW6600SW2. By doing thorough research on this issue I can see the problem is in a known defective control board (part #W10130544). This part has even been replaced by Whirlpool with a new control board costing around $300 for just the part. After calling for repair service, two people (1 agent and 1 supervisor) refused to acknowledge any known issues with this part and further refused to any type of repair or replacement of the part. It is impossible for anyone in that position to not have knowledge of this problem. Simply look on the internet for a countless number of people with this very same complaint. Even though my washer is eight years old it has had very little use. There are only two grown adults in this household and the machine has never been abused or overused. It still looks new. Whirlpool should be honest and responsible when dealing with this type of problem. They should agree to pay for the part and repair service... at the very least they should agree to pay for the part.

Bought the above named model number Whirlpool dishwasher in Nov 2017 and it stopped cleaning 6 months later, dishes were instead of dry and NOW the motor is completely shot! Never again! This is ridiculous that the part cost more than the product! Worse that I need it repaired or a new one in less than 3 years!

Our 4 year old Cabrio top loading washer failed. Apparently there is an engineering design issue with the pump and tub assembly causing the machine to not complete its spin cycle. These items will typically fail between two to four years of operation. We paid $1,000 for what we thought was a high end machine from Whirlpool. After having a local repair company diagnose the issue, we were told by Whirlpool we must use their authorized service companies. After 6 weeks of waiting for service, parts and several trips to the laundromat, we had the repairs completed by Whirlpools authorized service provider. Within one week, our machine failed again, called Whirlpool and they said will not help us. DO NOT BUY WHIRLPOOL PRODUCTS!!!

Our Whirlpool refrigerator was delivered July 27th, 2013 after waiting 6 weeks for it. I was getting something off the top shelf (side by side refrigerator) when a 2-liter plastic bottle fell and put a hole in the bottom shelf where it sticks out under the vegetable tray. I have had grandkids sometimes stand on that shelf of our other refrigerators without ever doing any damage to it. It makes me nervous of dropping something else. I would like to send a complaint directly to Whirlpool but dont know how to reach them.

My wife and I purchased a new Whirlpool gas range (Model#WEG745H0FS0) almost 2 years ago. Woke up one night to the smell of heat and the oven had come on! Thank God we were home. Very dangerous! Repair is going to be expensive! Havent used the oven portion in about 3 months now. And Thanksgiving is just around the corner! Any assistance is greatly appreciated.

The wife and I are retired and when it came time to purchase a new washer, we thought we would spend the money and buy top of the line so it would possibly outlast us. So we went to Lowes and spent $1000.00 plus on a Cabrio. Within the first year, the control board went bad, replaced under warranty, now no matter how little or much of a load the wife puts in this piece of crap, it goes off balance!!!Of course as previously stated, customer service doesnt give a crap because we also saw no need for an extended warranty having made such a large investment in a washing machine that we thought was built with a high standard of quality, SHAME ON US, SHAME ON YOU, WHIRLPOOL!!! You have lost a customer who has been buying your products for a long time but will never buy another and will be warning everyone we can to do the same.

Do not buy Whirlpool or Maytag appliances. They do not stand by their products. We have purchased 2 washing machines in the past 8 years. Both of them quit or broke almost as fast as we got them. The customer service agents were pleasant, but they would not help us at all. The machine we purchased has a design flaw that they will not acknowledge. They have been contacted by us several times and cant fix the problem. They need to correct a design flaw that is in all their machines.All of our clothes get encircled around the agitator and the machine gets off balance. We have to untangle our clothes from the agitator and pull them apart by hand. They make bad products, including a Whirlpool refrigerator that broke within a month of us buying it. They care about selling these crappy machines. Buy a GE, Bosch or LG. You will get a machine that works properly as soon as you hook it up. We have had their representative out several times to our house and they could not repair it. The repair techs have told us that Maytag and Whirlpool clothes washers are no good.

Whirlpool tells its technicians that the front molding piece on their dryers is a disposable part . Basically, it has to be removed to examine the console and removing it will break it 90% of the time. Therefore, the customer will have to replace a $100.00 part simply to diagnose any problems. I now have a dryer with no front panel simply because I wanted to know why a button was sticking.

This is the second time since I have had the fridge in September 2011. I had to have a new compressor installed about two months ago, and now, it is doing the same thing again. I had lost all my food before and its happening again. Last time, it took over three weeks before the fridge got fixed.

I’ve been struggling with this new washer since I bought it a year ago. It’s sold as a water saver machine, but it continually leaves white residue and lint on my dark clothes that will only come off if rewashed with no soap and no other clothes. The technician who came out ran a cleaner through the machine and that was it. It’s recommended that the cleaner be used once a month, but it doesn’t seem to do any good. Per the appliance dealer I’ve reduced the amount of detergent I use to a tablespoon. I still get the residue. Definitely not a water saver and a crummy washing machine. Don’t buy Whirlpool!

I have had my Whirlpool Gold for 8 years now and it has met my expectations. The glass shelves are easy to keep clean and it lets the lights give an open feeling to see everything in it. The ice and water dispensers are used many times every day and work just fine. Great appliance.

This is our 2nd circuit board failure in the 4-5 yrs, since we purchased this very expensive range/oven. The first time was shortly after the warranty ran out and Whirlpool would not even send us the part for free. They said there was nothing they could do. So this time we are not even contacting them and are just having our repairman order another new one. For a $1600 range to have to put more than $400 back in so far, I would never buy a Whirlpool again. I have been very careful not to use any cleaners on the circuit board as I was told by our repairman that that shorts them out. First the convect bake button wouldnt work, nor the convect roast, now the bake button, so the only buttons that work are broil and warm. Even the timer is shot. What a piece of junk (electronically). Beware buyers!

Always buy an extended warranty if you are going to buy a washing machine. Mine cost $129.00 extra and it is not through Whirlpool. Three control panels and two tub bearings later, the extended warranty insurance carrier gave us our money back to buy another machine. My wife loves the operation of the Cabrio, so we bought a WTW8200YW today, in the false hope that it will work much better. We have an extra washing machine in the garage for the three week period before repairs. The serviceman has to come look to verify the problem, then come back when the part arrives.

I bought a Cabrio top loader in 2007. Have now replaced a pump for the 2nd time. Replaced a circuit board once. Thank goodness the machine was purchased at a local appliance store who stand behind what they sell and are very prompt in their response time.

Front-loading does not do good job of rinsing. The Whirlpool Duet will not last longer than 2 years. Whirlpool recommends that owners purchase a new washer every 2 years. Whirlpool suggests owners purchase new clothes each week to avoid washing. Any owner would be required to quit their job in order to wash clothes. The Whirlpool Duet front-loader requires 12 hours per load. This means that only 2 loads can be washed in a 24-hour period. Each load requires 10 rinse cycles to remove suds.

Purchased 03/28/13. Refrigerator 62 degrees on July 4, 2013. Called for service July 5 - came out July 9 and told unrepairable - wiring harness set against tubing rusted and broke wires. Since July 9, I have been trying to get my replacement from Whirlpool and always told they will call me 24-48 hours - never calls. Asked for supervisor on July 22, then asked for her name and direct number. Supervisor said someone would call me about delivery. Supervisor told me if a local store would have had in stock, they would have sent it out from there (called local store and was told 6 were in stock and could be delivered tomorrow). Tried to call supervisor back to inform her, but number would not go through (apparently bogus number). As of July 22, 2013, still no refrigerator. Very poor customer service/service repair. July 24 - asked if I needed to get an attorney and/or contact local new consumer advocate - Whirlpool said they would issue a refund check for the refrigerator, and that I should receive it in 14-21 business days - said they could not refund on credit card I used to make original purchase. Hopefully, the check will arrive.

I had this same refrigerator in another home and had no issues, this particular one now I have nothing but issues with it. It seems that the quality is not consistent. First the ice maker was not working, then the freezer light burned out and now there is extensive frost build up in the freezer. The refrigerator is only 2 years old!

The agitation is too loud. I called Whirlpool customer service and said I wanted to return the washing machine because it was so noisy. Whirlpool customer service agreed that it was noisy and said they would send a technician out. Whirlpool customer service never told me the technician they were sending would cost me 25% of the washing machine cost. The technician said this is normal all machines are this loud. Now I am out the cost of the washing machine plus the cost of the technician and all I have is a very noisy washing machine. Im a real satisfied customer. The machine was bought 12 days ago.

When you shell out the money for a new water heater you expect it to work the first time. Mine did not. Luke warm water was all that we could achieve. After going through the troubleshooting steps we could not clearly define the problem. So they ordered me the parts and sent them to me. The parts were for the old model control unit and does not mate up with the wiring that is in the unit. The representative was put back in that they had no idea how that happened. And, no wrench came with the thermostat just another thing to spend money on. I told them I have had it. Then they say that this is a manufacturers defect and they can provide me with a list of repair technicians in the area. I gave them one star because I could not give them zero. They should have lead off with the service technician. Still not repaired. I will keep you updated.

We bought a Cabrio washer four years ago for over 1,000 dollars. It lasted two years. The cost to repair was too high. We bought a low-end simple machine two years ago from Whirlpool. Now we are told it needs a new control panel, which again is going to make it not worth fixing. Two machines in four years. I called their customer service and there was nothing they could for me. The person they recommended to fix it told me it wasnt worth fixing and didnt even come out. I am done with Whirlpool.

After 1 year, my fridges plastic interior wall/liner started cracking everywhere. One crack is right across the entire back wall; other smaller cracks are on the sides and back. Three fridge shelves literally fell apart: pieces fell off! The glue came undone on the sides of the shelf that hold the glass in. Pieces of the shelf itself were falling out of the fridge. The microwave door has plastic trim around the glass on the door, and it is cracking also. It seems that anything that was made Whirlpool and is plastic is cracking and/or disintegrating. Sears caulked the cracks in the fridge and is replacing the shelves, but nothing is being done about the microwave. Whirlpool said, Too bad. Go to Sears. We may have made the product, but Sears is responsible. And Sears is saying Too bad; weve done all we can.

I bought my Whirlpool Cabrio washer from Lowes in Statesboro GA on 2-14-14. I did purchases an extended warranty on it. After 11 months is when I started to have my problems. I was washing my clothes. I did not hear my beep on my washer. After 2 hours my laundry should have been done. I stopped on the wash cycle and shut off. I put it on the rinse cycle thinking it washed my clothes. It shut off during the rinse cycle. I called the Lowes repair. ** was to come the next day, He did not show up. I had to call again. It took 2 more days before he came out.It takes over 6 business days before I get my part. I have to have my laundry washed else where. It did the same thing again. I called. ** came out. He ordered the other part. It took 7 business days. It came in Tuesday. I tried to wash my daughters comfort on Wednesday. It did the same thing. Shut off during the wash cycle. I called at once. ** was to have been here Thursday. He never showed up. I called Friday. They said hell be there by 5. He still never showed up. I called back today .This time ** called me. He said, “So you tore it up?” I said, “NO it’s still doing the same thing.” He said hell be here tomorrow between 8-12. I am so tired of this washer. I even asked if I could get a replacement. They said no. I said this is stressing me out. I am on anxiety pills already. This is not doing any good. I paid all the money for this washer and it does not work. I have to arrange to have my laundry done some where else. All they said was sorry.This is the worse washer to buy.

Whirlpool refrigerator are garbage, and their customer service is worse. I will never buy their products again. My refrigerator never worked correctly and destroy all of my food soon after it being delivered.

Yesterday, my DC premier refrigerator purchased on 22.12.2011 suddenly stopped working for a long time, and the inside light automatically went off. All food, vegetables, and others are damaged and rotten. Now we are scared to keep anything inside this for huge loss and health problem. Kindly rectify this, and do the needful at the earliest.

We purchased our oven new in a package deal with the rest of our kitchen appliances four years ago. The bottom heating element in the oven has already stopped working. Every oven I have seen in my life has lasted a minimum of 15 years, and most 20. All I can say is DO NOT BUY WHIRLPOOL APPLIANCES! In the past 4 years, weve had the repair technician work on the Whirlpool refrigerator (once), dishwasher (3 times), and microwave (3 times). Now, the stove isnt working correctly, making this a total of 8 home visits by the Whirlpool repairman. Whirlpool is manufacturing trash for the landfill now, not quality lasting appliances.

Purchased the 2015 Whirlpool Cabrio. Today 5-2018, the panel went completely out. When I called the store (Lowes) they asked if I purchased the warranty. I responded no, she went on to say, “Well since you choose not to purchase the warranty youre stuck”. Even if I paid for the warranty a washer should not break down in less than 3 years. My previous washer lasted 18 years with no problems. We purchased this washer because of the larger load. It was one of the most expensive washers. It’s a piece of junk and the manufacturer will not stand by their horrible product. Please DO NOT buy! I will be filing a formal complaint.

Some years ago I bought a whirlpool water heater from Lowes and the thermocouple went out. No big deal, so I thought. I went to Lowes, picked up a new one and tried to replace it. It wouldnt thread even though the package stated it was for my model. I went back to Lowes and they gave me another one, same problem. So I called Whirlpool, they said it was a left handed thread and they discontinued it, but they could send me a conversion kit at my cost. So at that point I was 2 wks out so I paid for the kit. I received the same thing I bought from Lowes. I was so frustrated I ripped the thing out and got a new one. That was 2 yrs ago and now I am having the same problem. I called whirlpool and they want me to pay for the replacement part. Mind you, the heater has a 6-yr warranty. I went to Lowes and they wont replace it. They sell items that they dont stand behind. I will never buy another whirlpool item and I will never shop at Lowes again.

Purchased a Cabrio washer wtw5550xwo in Sept. 2010.. Had to replace the pump a little after the warranty ran out. Then recently the control board goes out. Called customer service to complain. This part costs $320 to replace. They told me since it is no longer under the one year warranty they could not help me. This is a major part in less than 5 years of the machines use. I guess I will be purchasing another washer. It will not be a Whirlpool or any company affiliated with them. How sad. I would not recommend Whirlpool to anyone. They just dont make them or stand behind them like they used to.

Buyers beware! I have had the Cabrio top loader washing machine for less than 18 months and it is already giving me problems. During the wash cycle, it sounds as though the gears are grinding to the point it wakes my family up two floors up! The spin cycle is a joke. The washer sounds as though it is going to spin off into another room! When I called Whirlpool, they told me to shut the circuit breaker. That might reset the computer. No go which I figured as much. I have had washers that lasted 10 plus years with no problems. It is not worth your time or your money. Never again, Whirlpool!

Within six months of moving into our new condo, the microwave started making noises like something was loose - like a fan or something - it would sound as if something was catching and would be quiet and then begin making noise. Mostly noisy but once in a while quiet performance. In talking with adjacent condo owner, he said his had just started making the same noise. Asked some of the other neighbors; many said the same thing. Some had theirs repaired; others were ignoring. We had all moved in within a few months of each other in our Phase of completion.Called Decker and Sons where microwave purchased; they said Too bad. Call Whirlpool direct. I did. Was told I could pay to have repaired through a service company. When I said several residents had been having the same problem and it would seem a recall should be made, I was told that 250 similar complaints had to be received before a recall would be considered. If I could find that many, I should contact Whirlpool. Well, that was obviously not possible. My next door neighbor had his repaired before he sold his unit; the new owner recently said she had just replaced the Whirlpool stove because of the poor oven performance (which I have also experienced even though I ungraded) and microwave due to the noise it made. I have also learned that three other neighbors paid over $100 each to have their microwaves fixed over the last few years. I have just continued to use mine. Today an error message came up but a motor noise continued. Came to my computer to check on Error Message meaning and found this site and registering complaint for an obviously poorly constructed/engineered microwave. Obviously, Whirlpool does not care or listen. I will not buy another Whirlpool appliance! I will do my best to warn anyone purchasing appliances to not buy Whirlpool. Had the company admitted poor quality, no problem, as a production problem can occur but to knowingly disregard and ignore is inexcusable.

I purchased the Whirlpool washer in February 2019 and delivery was in March. As stated in my previous reviews for the manufacturer, and subsequent repair calls, three; from the first time using the washer, it didnt fill properly for the amount of the clothes in it. A piece of paper towel never got wet through the whole wash cycle. I had to resort to raising & lowering the lid numerous times to get to the correct water level; adding water with a container or just pressing down on the switch under the top cover; 4-5 count. Needless to say very time consuming. As for hot water for doing white clothes, forget about it! It seem to me its the same problems with this whirlpool washer thats been happening with most of the other reviewers/purchasers. Did Whirlpool ever think about taken back one of these problem washers and checking it out for themselves? Maybe installing a clear plastic lid to monitor water levels at different wash cycles? Hot water temps when called for? Are these negative reviews ever seen by Whirlpool? Or in the trade is it called.... JOB SECURITY? Any more detail required? Cabo

Sometimes, it doesnt get the dishes clean. I am not sure if it is the dishwasher or the detergent. I recently switched to Finish Quantum Max and it seems to be doing better. I always use the pots and pans cycle. Lots of features, most never used. For instance, china crystal, quick wash, rinse only. The size is ample but the interior design could be better. Solid black, looks good, Model GU1500XTL82.

I love my Whirlpool gas stove and oven. We opted for the convection feature as we are a family of 7 and often need multiple items in the oven. This was a very useful detail. I didnt know I needed that. I now cant go without!

I have Whirlpool 25 in. Side by side. I love the space freezer size is bigger than the old one I had. Makes ice as it should. Overall solid appliance that I trust. I purchased this refrigerator a year ago after research.

I love the French doors with the ease of seeing everything when you open the doors. The only thing I do not like about this unit is the ice maker. If there is more than one person in the household there is never enough ice. Also the ice gets hung up inside the ice maker often.

Whirlpool Washer WTW8700EC + Dryer WGD8700EC. Bought to replace a 35-year-old Whirlpool set that is still working and had no repairs in that 35 years of ownership. Gave to family member and its working well. Was not a cheap item but well worth the money. It performs beautifully. I chose Whirlpool. It is a proven brand with a long history of reliability. When I bought my last Whirlpool, I bought the top of the line model washer and dryer. They say you get what you pay for and that holds true in my case as has with many others who believe it! So this time I did the same thing and bought the best top loader they had. It has many options I still need to learn. I just use it like the old machine and dont need to worry about types of fabrics or making mistakes. Just follow the instructions for detergent and softeners and all is good. This machine cleans as great as the old one without beating the clothes to death. New agitator design keeps from paddling the clothes, so I dont need to use the gentle cycle or medium to preserve the clothes. The dryer I can say is most efficient as I noticed it took far less time to dry, and notice a small drop in my electric bill and gas bill. I think this will be my last machine ever needed. I do take care of my things and I do clean and polish my machines, they are an investment like a car or house. Front loaders have a lot of problems with leaks from the doors. Will stick with top load only!

In the last two years, the inner glass door of the oven has exploded. The last time was Tuesday, 14th January. The oven door was ajar because we had just finished cooking dinner. The noise was deafening but the worst thing about it was the large pieces of glass thrown all over the kitchen. Most of which were large enough and sharp enough to kill a child and seriously wound an adult. I phoned Whirlpool to report this. The operative I spoke to was very polite but told me these things happen and I could have banged it a while ago and left a weak spot! She also said a Supervisor or similar person would telephone me that day. It is now Saturday 18th January and NO phone call. MY concern is there is no mention of this being a possible problem in their literature and their obvious lack of concern under a Health and Safety situation. Not to mention the cost of replacement door glass.

I purchased a Whirlpool hot water gas heater with a six-year warranty. It only lasted three years. When I called for an RA#, I was told, Well, well send you a part after you get a plumber and pay for it. Meanwhile, there is water all over the cellar floor. I called again and was told the same thing. Two weeks of no hot water and no help from Whirlpool. I will never order anything Whirlpool ever again. They stink.

Over the last 3 years, the self-cleaning oven has decided to lock the door and clean itself with my food still inside on five different occasions. There is no way to override the lock. We have to shut off the electric power completely then wait for the oven to cool down before we can open the door and remove the charcoal substances! This happened once while a member of our fire department was here for dinner.This is one of the most frustrating and dangerous events ever! Please, please, please do not purchase a Whirlpool self-cleaning oven! I will never purchase one again. I was so excited to have a glass top stove and the first time this happened, I thought it was just a freak occurrence. But it is happening again and again. My oven is kept clean in attempt to avoid this, but to no avail. Not only am I afraid of a fire, but Im also out too many dollars of food waste! How disappointing to be cooking dinner and have it ruined by the oven. Nothing was burning in the oven at the time it decided to lock itself either! Disappointed, frustrated, and extremely miffed!

After 2 years it stopped draining. We have to physically hit cancel to get it to drain. Also, I have had to make my own tool to take bottom spin bar off to get to and unjam grinder and we pre-wash all dishes.

Cabrio washer - I have always had a Whirlpool appliances and have always been satisfied with them, but this is the worst washer ever manufactured. I bought it to wash heavy loads of jeans and it takes me all day to wash 1 load because it is always out of balance. No matter what setting I put it on I have to keep rearranging the load. Without putting up with that, the load takes 87 minutes on bulky wash. That is far too long and then you add all the time I spend rearranging it to get it to work. I think there should be a recall or at least admit you have a poor design. My son works for Whirlpool, but Im not sure I will be supporting this company again.

I should have read reviews prior to purchasing the Washer and Dryer. The washer sucks big time. Does not clean clothes. Leaves soap in clothes. The repair man said use 2 tbsps. of soap. Still soap in clothes. I use 1 tablespoon of HE soap. 2 1/2 hours for 1 load because I have to use deep water and extra rinse on first wash. Then I wash again with no soap. I HATE this washer. Whites are now yellow after washing. Cannot do lightweight comforters. I am at the laundry mat more than using my new washing machine. Dryer is ok but does not remove any lint from clothes or towels. I always trusted Whirlpool. Not anymore.

I bought my home in 2010 and less than a year my Whirlpool microwave started forming a crack near the handle and today August 22nd, my husband and I are looking at it thinking, this is totally coming apart! My Whirlpool refrigerator had issues also. Stopped cooling less than a year, and I am thankful I had a warranty with it. Of course it was still under the manufacturers warranty. Use to be able to depend on WHIRLPOOL. Now you feel like youre in ONE with their products!

I purchased a Whirlpool washer and dryer from Best Buy. I purchased one on sale that was a great value. The delivery and set-up went well. However, the model I have had a loud vibrate. The drum in the washing machine would wobble and shake across the floor. I finally had to return it and replaced with same model. I experienced the same issue after 30 days. I didnt take the insurance out and I regret that move.

We purchased it from Best Buy. It was a good thing we got the extended warranty. They completely rebuilt it two times. In the 6 years we have had the washer. The motherboard went out. The bearings went out. The only thing nice I can say is that it’s a top loader and doesn’t get smelly like the front loaders do.

We got our Whirlpool french door refrigerator with freezer on the bottom (Model: GX5FHDXVY04) in June 2010. In the past six months, the refrigerator portion loses cooling and temperatures go to the 60s or 70s. We found out that by turning the unit off until it defrosts, it will work again for awhile. Weve had water overflow on our wood floor. When this happened the third time, I called Whirlpool to send a repair person.The person I talked to said it could be over $400 to repair and that it would be more economical to get an extended warranty for about $314, which I did. I did not receive the contract via email (it may have gotten lost in spam). The repair man came and said yes, this was a common problem due to a design flaw and that it needed a $6 part to make the water drain smaller - so that too much air didnt get in.It was May 1st before the repair could return to install it. This was done and we thought - expensive but its taken care of. Today, May 5th, the same problem happened and I have to throw away food again. Its the weekend and there is not a repair person available for two weeks - I got an order number and may request that the repair come sooner. To add insult to injury, I found out that the extended warranty is good only up to $450 and not good for any repair that might be needed in a year. Most of the repair goes to travel to get to Fairfield and labor and we have used most of the warranty already.

I hate my Whirlpool refrigerator: It has a upper freezer with no light. The shelves are not split and raising or lowering shelves gains nothing and may even take space away. I would never ever buy another Whirlpool.

Never again will I purchase any Whirlpool product. I was seduced into purchasing a Whirlpool dehumidifier by the sale price at Canadian Tire. Big mistake! It worked as expected for four months before all the refrigerant leaked out - we found this out later. I contacted Whirlpool and was told I could take it to their authorized service depot (a 50 minute drive from here) for repairs. I did so and was charged $44.80 for them to troubleshoot the unit. Two weeks later they told me that the refrigerant had leaked out and it would cost $563 for repairs. For a $200 unit!! Get serious! I pointed out, according to my Canadian Tire receipt that the warranty was for 5 years on the compressor and sealed components. After further collaboration between the repair depot and Whirlpool, I was told that my warranty is not with Whirlpool but rather with the company that produced the unit for Whirlpool, namely Hisense and that the Whirlpool repair depot did not do warranty work for Hisense. I then had to fax the technician report to Hisense to get an authorization number for a replacement unit from Canadian Tire. Once armed with the authorization number, I had to visit my local Canadian Tire store and pick up the replacement. That unit worked well for about nine months before it failed. Considering service depot charges and all the driving involved, it cost me something like $100 for a warranty replacement (not including my time). No more fooling around with this junk. I just ordered a Kenmore dehumidifier. Hope that one is a better investment. I see now that Canadian Tire no longer sells these units. Maybe they figured it out. Judging from other Whirlpool reviews, it seems I am not alone in my views. My recommendation - stay away from Whirlpool!

Purchased Whirlpool front load washer 2010. Had it repaired 2013. Paid $599 for washer & $648 for the repair. Mailed copy of sales and repair to Whirlpool customer service. Received call from customer service and was told to have a nice day.

We purchased this washer and dryer new in 2011. Have repaired door to washer twice. New doors total cost $500.00 each time. Now it is cracked yet again and the dryer door has to be adjusted. The temp does not work right. Have to do minimum of 2 cycles for drying. Very unhappy. We may as well buy a new set of another make. Tired of the expensive repairs.

Whirlpool Cabrio Washer-Dryer - Bought a set a few years ago at Lowes. They are a very attractive set and I was pleased at first. Now, I have had to have repairmen out for these units 3 times. The bearings keep going out on the washer because it spins so fast, it wears them out. Now the thing is leaking. Whatever happened to the days when appliances lasted 15-20 years. For the high cost of these things, they are junk. I am very disappointed. I will never buy one of these again.

We just received our brand new Whirlpool washer and dryer from Home Depot. The delivery person started the washer and started the dryer and promptly departed. My husband immediately put a load of laundry into the washer, and he noticed there was insufficient water levels to adequately wet the clothing. Approximately 3 tablespoons of warm water were added at intervals of approximately one minute each. The water level never rose above 3 inches at the bottom of the tub despite setting the washer on the heavily soiled setting. After the spin cycles he removed the extremely damp clothing and it appeared that the machine had not properly completed the spin cycle and drained an insufficient amount of water from the clothing. He tried another load, and it appeared that the sensors were not working which regulate the water levels because most new machines use far less water. However this washer was defective. He then placed the clothes in the brand new Whirlpool dryer. The clothes ran for over five hours and never dried and the dryer never got hot. There was obviously something wrong with the thermostat. We are both disgusted and will never ever buy a Whirlpool product again. In addition because of the extremely poor response from Home Depot, we will never purchase an appliance from them again either. So sad that Made In America, which was on a sticker on the front of the machines, does it mean diddly squat these days.

Purchased the Sears Oasis (made by Whirlpool) washer and dryer almost 4 years ago and I have worked on these machines more than the Maytag machine and dryer I used for over 22 years. Electronic and mechanical problems. One recurring problem is loose change working its way into the drain pump on the washer and it knocks a hole in the side of the housing. You later discover it when you go down to the basement and find about 50 gallons on water on the floor. Very poor design! Never happened the first time with the Maytag.

Great washing machine. I have been using for over 2 years and this washing machine has NEVER failed me. Clothes from extreme filth to sensitive material always come out clean, not damage, and smelling great. I would highly recommend Whirlpool washing and drying machines to anyone!!

16 months after purchase, the machine starts displaying F71 codes, 6 weeks later F70. After calling Whirlpool customer service number on the User Manual, we were told that the washer was out of warranty and there was nothing that Whirlpool was going to do for us. I have a reasonable expectation that a brand new $800 washing machine will operate for many, many, trouble free years, but finding an electronic failure that has been estimated at $400 to repair, 16 months after purchase, is simply and obviously unacceptable. This is clearly a defect in design and/or manufacturing.

This Whirlpool refrigerator/freezer Model W10314956B was purchased from Lowes on June 29, 2012. Recently noticed rust appearing under ice/water dispenser tray. Requested warranty service, but was told the problem was considered DUE TO WEAR & TEAR! TOTAL COP-OUT! There are NO MOVING PARTS in this area; how can there be WEAR and TEAR? To my mind, this can only be charged as SHODDY MANUFACTURING or INADEQUATE QUALITY CONTROL by the manufacturer.This appliance is only 6 1/2 years old! Consumers expect refrigerators to last much longer than that. The only possible cause for this problem is as stated above: poor quality control by the manufacturing plant, and I completely discount being told the problem was due to WEAR and TEAR! I will think long and hard before I ever even CONSIDER purchasing another Whirlpool product, and maybe YOU SHOULD TOO!One issue that keeps gnawing at me is HOW, since this is supposed to be a STAINLESS STEEL refrigerator, can it rust? The best answer I found on Google was that its likely due to insufficient chromium in the mixture of metals used to make stainless steel. To me this continues to point to shoddy workmanship at the manufacturing plant. I have pictures of the problem, but for some reason Im unable to copy them to this complaint. Probably because Whirlpool is afraid of pictures that confirm their shoddy craftsmanship!

We purchased this washer on 2008-04-27. It ran okay until a few months ago when it began making strange intermittent noises. This is now happening more and more often. I reviewed a lot of websites and see that this is a common occurrence for Whirlpool Cabrio washers, and Whirlpool will not stand behind it and make it right. Im going to write them a letter mirroring what Im saying here, and remind them that other appliances in my house are coming due for replacements or upgrades. Whirlpool and its affiliates will not be part of those upgrades going forward. I have no patience or tolerance for expensive **, which is what they put out here. I will have to purchase a replacement washer since this seems to have two major areas of failure, both extremely expensive to repair. I might check out Roper and see what they have--its apparently very well rated by the folks that work on these things.

My refrigerator will be 3 years old in September. It stopped working two months after my warranty ended, in November Thanksgiving Day. I was so thankful that I had snow on my deck to keep everything cold. I had several family members in my house and watching my husband defrost a frost-free frig? This was a nightmare. Then a few weeks later, my husband company refrigerators did the same thing: freeze up and stop working. He defrosted theirs as well.I know that lots of consumers have had the same issue with any of the bottom freezer refrigerator doing the same thing. I think we, consumers, should make these company recall these lemons. Why should we have to pay more and buy more our parents had their appliances last for years. He had done this approximately 3 times since my warranty ended in September of last year. The problem is the food goes bad, the freezer ices up, causing the refrigerator to ice up and stop the air flow.I contacted the company and this is what they told me: I had to pay $295.12 to get the repair completed. It was the DEF control board. I guess others have the compressor go out and that cost over $600 to fix. Why is it our fault as a consumer buying their products promised and concern for 1 year, not 10 years. It is no wonder why America is broke? My question to the Whirlpool was, how on earth can this be the consumers fault? Here is their reply:According to the model and serial number provided, we do not indicate that there are any known recalls with this particular model. A recall requires that a product poses a threat to a persons life or health. Since this is not the case in this instance, we do not have a recall. Once a product warranty has expired, any costs for maintenance, service, or component replacements are then within the owners time frame of responsibility. Taking this into consideration, I regret to inform you that due to the age of the product, we will be unable to assist with the cost of the repair. If you have purchased an extended warranty, we would recommend contacting your extended warranty provider directly to discuss the options they provide.Oh, they sent me a postcard asking if the repair service I received was good... Yes, the company who came out did a fantastic job. I think I may have to call them back; it is acting up again. I have 90 day warranty....

This oven/range (W10665261B) has a cleaning feature that DOES NOT WORK! Do not buy unless you want to hand scrub the oven without any cleaning products. No one at the company cares. I will discard the oven.

At some point, Whirlpool should accept the fact that they should not sell this machine. Word of mouth spreads fast! Im hoping it will make a big dent in sales because I know then they will listen and act! I purchased it in 2006 for $800, thinking this Cabrio 6400SW is a dream, I can get more done in less time (at that time, there were seven in our family). However, problems within the first year, F1, but I was happy and still under warranty! It was fixed, only to start the problem again. This time, not under warranty! I really wish I had said yes to the extended warranty! Even the repair guy Whirlpool sent suggested it may be a good thing to get the extended warranty if I were you! I think he was trying to tell me something!My naive thought was, why spend more money we did not have? After all, it is a new machine! I did not comprehend that any company could sell and continue to sell something that was clearly a defective machine! Nor did I entertain the thought that a company would not stand behind their product! It is now 2012, I still have the machine because we have dealt with it and have/had no extra money to throw out at it. I have dealt with F1 for several years and did not contact Whirlpool, mostly out of lack of time to research what the deal was and if others were experiencing the same. In November 2011, after reading many complaints and frustrations on the internet and what results they got, I called Whirlpool. Using a level head, sugar sweet persona and a mindset of disbelief that Whirlpool would allow such problems, the customer service girl did her best with what she was told to reply with (meaning, there is nothing she can do). It is then that you ask to speak with a manager or director. I won in getting a repair guy out to fix the F1. They made it sound like they were doing me a onetime favor. The machine board was replaced, the repair person also thought there was an obstruction in the hose and he could fix it, but it would cost us money and suggested we try our hand at it first. We did find an obstruction and for one week, the machine was quietly working beautifully! Whirlpool even called to see about how it was working and my husband had answered that everything works well, not knowing that Ld is our new problem. Ld had started to pop up at the end of that week.So here it is July and Im so frustrated trying to get wash done. Im thinking of all the wasted time, all the wasted electricity and energy Ive spent trying to get this machine to work! My kids are trained to hit stop/pause if they hear it beeping. Some days we cant even get the clothes to spin dry. I try different cycles to get the machine to start and often have to cancel the cycle and change it to another cycle to get the machine to continue. Is there a smell? Yes, and I run the clean washer cycle twice in a row just about every other week now. That doesnt even seem to clean the washer anymore! Tangled clothes sometimes. Ld always, uL sometimes and a sound like it is trying to do something but is stuck. Lots of laundry to do! No money to fix it! Whirlpool needs to stop selling an inferior machine! I know one thing. Never Whirlpool again and I tell everyone not to go with Whirlpool Cabrio. Even one of my co-workers had one and bought a new washer (not Whirlpool) because of problems with her Cabrio only after three years! Do not purchase a Cabrio!

We live in Hawaii, so the price for our stacking closet size unit was exorbitant. It was over $1,000.00. It is small so the size of loads are small too. We bought one that is supposed to sense the load size and deliver the correct amount of water. It does NOT do this. Reviews online show complaints of this same nature. It does clean well but we have to do very small loads to get that.

Not completely happy with my purchase of the Whirlpool Gold Series refrigerator I just paid off this month. Have had the refrigerator for one year. To be as large as it is, it really doesnt seem to be able to hold that much food. The refrigerator is on the top and the freezer is on the bottom. We began having issues with the ice in the ice maker becoming frozen together and forming clumps of ice. The ice felt damp to the touch rather than feeling completely frozen. We called the manufacturer and they said to be sure the vents in the freezer section were not blocked by food. So you have to be sure to load the freezer so that food doesnt block the vents. Additionally, when filling your glass with ice from the door, unless you are EXTREMELY careful, all of the ice will not go into the glass but spill out onto the floor. Weve had the refrigerator for one year and I still have ice coming out that doesnt make it into the glass. It is not user friendly at all. One last thing - the refrigerator has double doors and to get to the section of the middle pull out drawer, you have to open both of the double doors, letting out a lot of the cold air. For the expense of this particular refrigerator I would not recommend purchasing it. My last refrigerator was a Whirlpool as well. It lasted 17 years and I was very happy with it. This Gold Series was supposed to be a step up, but I feel it was a step down.

I purchased the glass top Cabrio a couple of years ago. Without an agitator; it is amazing how nice thick towels come out with holes or rips! Clothes get so twisted. My sister needed a new washer and after telling her the problems with the Whirlpool; she purchased an LG. I have told many people that have purchased an agitator free machine to stock up on Affresh or one of the other tub cleaners... you need them to keep the odor from getting into your clean? clothes. I cannot wait to sell this washer or give it away!!

4 years ago, we purchased a Model UMV1160CW-3 over the range microwave. After 14 months the door cracked around the handle and eventually fell off. We made the HUGE mistake of buying the same model for ease of installation thinking that this would be a typical issue. We purchase another duplicate model in April of 2016 and less than 16 months later the same issue occurred. Spoke to customer service on 12/28/2018 and they told me that they would pick up the cost of the parts but I would be responsible for labor which actually exceeded the cost of the microwave. Exceedingly poor-quality product and support. Will not purchase another Whirlpool appliance.

I bought a new home from DR Horton with Whirlpool appliances. All of the kitchen appliances were Whirlpool which came with a 1 year warranty. After closing on the house and getting in, started the dishwasher for the first time, it started leaking water instantly from the bottom of the unit and spilled all over the floor. Tried to contact the builder/inspector who asked us to contact Whirlpool. Called Whirlpool and I was kept on hold for over an hour before someone answered. The rep was so adamant talking all unrelated things and said that she cannot do anything for another 15 days. After escalating to the supervisor, it was the same response. The service at customer care is so bad with no fix in sight. I am not sure what they are going to do with the appliance and not sure whether they come and fix it or keep me waiting. Very unethical, the way they talk to the customers.

I had a kitchen fire in 1999. All appliances were replaced with Stainless Steel Whirlpool. My old fridge was an 18 y.o. Whirlpool and still works fine in the garage. My old above range microwave was 12 y.o. and worked fine, I should have kept it. I had to replace my new Whirlpool Microwave after 4 years and 4 repairs. (Main Power Diode kept failing). Now my Whirlpool Gold fridge is not defrosting, even the freezer light switch is frozen. This French door freezer also seems to have less capacity than my old upright freezer. The retailer seemed sympathetic and pathetic. They would not budge on repairs. I told the contractor that did the rehab on my house what happened, he said he would stay away from Whirlpool and that retailer.

So I had a problem with the water heater after 2 years and had the sensor fix by my heating people. Now the water heater is 3 years old and started leaking from the top of the water heater. Called my heating people and they fix the pipe and coupling on top but he told me the water was still bubbling up at the top. He told me it could stop and 70% it would be ok. Went to check on it and it continues to leak so I called Whirlpool because it was still under warranty. They are the most horrible people to deal with. First of all I told the guy it was leaking from the top but he asked me if it was leaking out of the side pipe. Didnt know what he was talking about and he kept sighing on the phone. If I knew about water heaters I wouldnt be calling them. After all the questions it came down to it was leaking where I told him at the top. He gave me a number and told me to take the water heater back to Lowes and get a new one and then call them and they would move the warranty over to the new heater. Really???? We are not talking about clothes you want to bring back to a store. Asked him how I should do this and he told me to call a heating contractor. So does he think that the heating contractor and going to run the water heater back for a new one??? In the end I just called my heating people and they are going to send somebody out to install a new heater. So much for Whirlpools warranty. If this is under warranty and it is exclusive to Lowes then they should be having Lowes bring a new one and install it.

The trim on the front the my Whirlpool electric range has rubbed off. This is where the knobs for the burners are located. It was replaced once during the Whirlpool 1 year warranty (so it obviously happened with the first year!) and again during the second year we have had it. We have an extended warranty but have been told that it is not covered. It is ecstatically unacceptable. We have not used any type of harsh cleansers on it - simply a sponge to remove any spills yet it keeps on disappearing. I strongly recommend against buying any range from Whirlpool as it is quite obvious that they do not stand behind their products beyond the first year.

I have purchased 2 Whirlpool washers in the past 6 years. Both have been a huge disappointment in quality and dependability. The 2nd washer I bought May 8, 2015 had problems from the initial purchase. In just a little over 2 years I have had to replace the suspension rods, and now the transmission is broken. Both washers had transmission problems. I have bought my last Whirlpool products. I recommend persons considering buying a Whirlpool product check the reviews before you purchase! I cannot believe this company continues to survive.

I have the original (gak!) Whirlpool Calypso Washer and Senseon Dryer pair. They have given great service, and I find them easy to use. I wanted a top-loader but I didnt want an agitator. These fit the bill. How long have I had them? Gosh, must be 12+ years. A recent service call indicated that other folks havent had the same luck - apparently the knee-action is troublesome - and I found the Whirlpool-trained service techs werent very knowledgeable and was able to fix the thing myself with parts off eBay! All in all, I would definitely look at Whirlpool for my next pair.

I like this refrigerator. Its a two door. I did not get an icemaker and I have plenty of freezer room. The milk will stay fresh at least for a month. I like the crispers. They keep my food fresh. It keeped the Romain lettuce very fresh on the package, it was pick 7/31/2019 and just have a fresh green Salad Sept 6, 2019. Easy to move when wanting to clean the floor.

They attempted to fix our fridge, 1 year into owning, claimed no parts available. Never fixed, fridge died. Refused to repair. Offered us a 15% Visa gift card on another Whirlpool. Unacceptable, they can’t fix their product, and will never recommend anybody go through my familys $3,500 wasted fridge experience. Don’t trust them, they lie, and just escalate it to another liar in the customer service department.

This is our second Whirlpool refrigerator that has the same defrost water drainage problem. I was told this newer model had updated technology, not so, actually it is worse. My older refrigerator went about 8 years before I started noticing water on the floor and this newer model is 4 years old and it started having water overflow at 3 1/2 years. Then in April we replaced the water filter and the ice-maker stopped working. My freezer also stinks like stale water (my reason for replacing the old refrigerator plus the water on the floor). I followed a YouTube video for defrosting the drainpipe, it was very tedious, labor intensive, and time consuming and worked for 3 weeks. This is very upsetting. After spending $2500 to have such problems and my expensive $150 4-year extended warranty expired just weeks before the ice-maker went out. This is obviously a design problem that Whirlpool refuses to address since my other model was a year 2000 model and my 2013 has the exact same problem. VERY POOR customer care in addressing these design failures of both the defrost drainage (just make a larger drain port!!!) and the ice-maker.

Whirlpool has been an absolute nightmare from day 1. We bought a brand new 50-gallon water heater from Lowes. It did not work. We went back to Lowes and were told to contact whirlpool. We contacted Whirlpool and were told to conduct a number of test and all test passed, so they said we needed a plumber to come look at it. Remind you that this water heater is brand new and has not worked since day 1. They said the plumber would cost $130 and they would pay for parts. Why am I having to pay when my water heater has never worked. Paid the money. Had them come. They replaced a part, did not work, replaced another and it did not work, so the plumber requested a new water heater. Whirlpool refused. What is the point of paying and they are not going to fix it.Whirlpool insisted it was our ventilation even though all test proved that was not the problem. So out of pocket again to fix the ventilation and it did not work. After 2 months of no hot water with a two-year old at home we had someone we know come look at it and fixed the main pipe. Whirlpool took my money and didnt fix my problem. HORRIBLE SERVICE.