We have never had problems with our old Kenmore appliances. Since we have had the Whirlpool complete set we have had problems with both the Refrigerator and now the Stove. The fridge had already been re-engineered by the time the repair man got here but the fix didnt work. We had a 50 degree refrigerator for over a month. Now the stove wont keep a constant temperature so we wait for the service man once again. They look beautiful but they are the worst we have owned over our 36 years. They obviously have engineering issues looking at all the other reviews. I dont see us purchasing another Whirlpool appliance in the future.

It has needed a new motor, new tub assembly, and about six other repairs. Now the heavy duty tub just thumps around and I get an uneven load message, even when running empty. It is the worst single machine I have ever purchased, with the possible exception of the Whirlpool matching dryer, which lasted about three years.

I have a Whirlpool refrigerator from 2017 that is causing so many issues and finally completely broken after spending $500 on repairs. 4 months ago, refrigerator was making loud noise and freezer wasnt working. Then within a week the whole unit stopped working. Then, freezer got all frosty and the whole unit got shut off. 2 month later, the ice maker stopped working and nothing is working now. I called the Whirlpool and they offered me to purchase extended warranty for $530. I could not believe they wanted me to spend another $530 on this refrigerator after spending all this money on repairs and still useless. I refused to buy any more Whirlpool product that I used to love in the past. I am just so disappointed with the customer service as the supervisor from Whirlpool said that is why they offer extended warranty. $2000 refrigerator to last me 3 years???? Not doing this again.

Our 3 1/2 year old dishwasher is falling apart. First the left slider broke on the top rack. We ordered a replacement part ($74) and when ready to install, discovered the right rack was also falling apart. At that same moment, the rollers fell off the bottom rack! It seems the plastic parts cannot tolerate the heat in this dishwasher (just a guess). We’ve returned the new replacement part and are shopping for a new dishwasher. It will not be anything from the Whirlpool line!

I purchased a new Whirlpool Cabrio yesterday. When I went to use my new washing machine it did not work. So basically I have a brand-new washing machine that is a lemon. I will highly recommend do not buy any Whirlpool products.

I had to turn the gas off my water heater and when I tried to turn it back on, it refused. I called the number on the heater and somebody answered. The guy told me to take the pilot gas hose off to make sure there was gas in the line. I did this but after spending 1/2 hour putting the pipe back in, the pilot light did not go on. I called them back and they told me to push a white switch and hold it down for 10 seconds and retry. That didnt work either so they told me to call a repair man and gave me the phone number of a local plumber. Trying not to give up, I removed the pilot light pipe off and tried blowing and sucking on it. I couldnt get air through the pipe so I figure that somehow it was clogged. I tried taking the whole assembly off (there are 2 screws to remove) but couldnt get that out. I called Whirlpool again and asked for a manual to be sent over the internet but I couldnt open that either. The water heater is only 3 years old and already Ill be paying to repair it.

I have a Whirlpool cabrio washer (Model: wtw6300 Serial Number: CT3573525) and I am very disappointed with it. The spin cycle is the worst--sounds like a jet engine and gives me the UL error message of unbalance load. The machine was purchased in 2007 but was kept indoors. At the beginning, I didnt care because I had warranty with BrandsMart. I had to call at least four times. But now, I bought the automatic control and it didnt work. For two days, I was trying to balance this machine but it is impossible since the beginning.I contacted customer service and they advised me to contact the repair service in my area to get a diagnostic analysis of the issue. Hello! I already know what the problem is after reading all these reviews! I cannot tell you how pissed off I am. I will never purchase anything Whirlpool. Two of the gas burners of my Whirlpool kitchen, after two years of use, are no longer working. I will definitely contact BBB as soon as possible. Come on, fellow complainants, let us continue to fight to get a possible recall soon! We all have the same problem because this is a manufacturing defect!

I purchased a Whirlpool dishwasher and have had it repaired four times so far. Last time they replaced the main computer located in the door. I attempted to use the dishwasher tonight and it is completely dead once again. I usually have had good luck whirlpool appliances. After all these problems will no longer be using this brand. I contacted the store where I bought it from, Famous Tate. The first time it stopped working just a month after the manufacturers warranty ran out and they were absolutely no help. So in the future, I will no longer buy any type of Whirlpool appliances.

Very unhappy all the way around with Whirlpool. The first refrigerator shipped had to be replaced, I do not remember the original problem, just the ordeal involved. The replacement had to have the computer board replaced twice, the icemaker stopped working after a few months, the freezer door does not seal properly. And now, after less than 3 years, the drain is clogged. After researching, come to find out this is a common problem and has resulted in many water damaged wood floors, including my own. Never Whirlpool again. There are much better brands on the market today with better price points. I highly recommend staying away from Whirlpool.

Lasted a whole two years, no warranty from Whirlpool. No biggie until I read countless complaints that Whirlpool OTR microwaves dont last. When I was young we had a Whirlpool microwave oven that lasted 15 years. Apparently this one (made in China) is the direction Whirlpool has chosen to take, cheaper products for higher profits.

I purchased this machine three years ago. It is junk. I have had two washing machines and they lasted for years and years. Never had a problem with either machine. I purchased them from Sears. When I the Cabrio, I was told it was the top of the line washer for Whirlpool. Three weeks ago it started making a noise like a plane taking off. It wouldnt spin the clothes. The repair person said that it could be three different things the parts, for which, would cost in the vicinity of $200. However, since it was making such a loud noise and water was coming out from underneath the washer, he was certain the transmission was out. He said the noise was an indicator the bearings were gone. I didnt see much point in repairing the washer if the transmission was out because it couldnt be fix.There was a couple at Lowes purchasing a machine at the same time as myself. They said they had a Cabrio also and it was only two years old. It wasnt spinning the clothes either and making a tremendously loud noise. They told us this before we mentioned that we had a Cabrio also. I will neither purchase another Whirlpool product. Junk!

I purchased the refrigerator/freezer, Whirlpool model GX5SHDXVQ02, 2 years 10 months ago. It is now not keeping the refrigerator portion of the unit cold or even cool. It is 70 inside the refrigerator although the freezer portion is doing a fine job. This unit is not even 3 years old yet! To top it off, the unit only has one year warranty on any part. The repair person is now here and replacing the control board. This piece alone is costing me $184.12. Then the labor hours and service call. I should have trashed it and bought a new, different brand. Not even three years old. My last refrigerator/freezer lasted 13+ years with no problems.

Had washers model # WTW8500DCO repaired after being install for 14 days. Have had washers repaired every 90 plus days because of constant electrical and mechanical failures. Would not ever buying another whirlpool appliance to my worst enemy. Customer service is a total failure. If you ask a question after talking with you for 5-8 minutes and they dont have an answer they start saying HELLO, HELLO? I have to hang up. I cant hear you. Just a really sad business. Stay away!

We have a new home with a Whirlpool gold refrigerator that has been fixed twice in 3 years for not cooling adequately (over 45 degrees), a dishwasher that the mother board has gone out twice with 3 different service calls (repairman recommended trashing and buying a new one), microwave that is rusted out on inside door below glass, and washer with horrid smell if you dont wash with bleach weekly and dryer whose sensor doesnt sense anymore after 2 service calls!!! I cannot believe the poor customer service and lack of responsibility the company has taken on these not inexpensive products!! Like others on this post they will not acknowledge problems and tell me I should have bought extended warranty. I am so angry - there should be some sort of law that allows recourse for such bad behavior!

We bought this dishwasher because it was rated on the quieter side... It was purchased in 1999 and is still operating like new. I am amazed it has never broken down. I have wanted to replace it but my wife says Why?

I have had my Whirlpool W10280546B HE washer for 1 1/2 years. For the last year, I have had constant problems with the washer leaving a large amount of residue (in spots) all over my laundry. I have always run my washer as instructed, and I only used HE detergent in the correct amount. This residue appears to be fine lint, but may be lint combined with detergent.I have used the washing machine cleaning tablets and powders, but this has not helped at all. No one seems to have ever heard of this problem. I have to clean off these spots which cover approximately 1/3 of each article with every washing. The dryer helps get some of it off, but not nearly all of it. Any suggestions besides buying another washer of another brand after only 1 1/2 years?!

LED Freezer Lamp stopped after eight months, $14, not covered under warranty. OEM water filters are costly. Icemaker is noisy, ice dispenser chute clogs. When refrigerator was set at 38-40 degrees the eggs and most top and middle shelf items partially froze. Noisy compressor. Good price from Home Depot sale in Nov. 2019.

Whirlpool Refrigerator 36 inch #WRF993FIF. We have owned refrigerator for 3 months and both ice makers went out. Worst customer service ever with Whirlpool and their appliance specialists. Ordered new ice maker, but still broken. Whirlpool is saying it needs a new door!!! I have asked for a new refrigerator, but cant get anyone to respond. I have called 6 times being on hold one time for over 30 minutes trying to get a scheduled appointment for a new door! This is by far the worst service that I have ever received from a company.

On 12-22-13 we purchased a new Whirlpool Washer- Model=Top Loading-WTW4800BQ. We also purchased Lowes extended warranty. Washer was delivered on 12-24-13 around 1:00pm. Connected washer. Washer filled with water. System started but would not wash. 10 minutes later it rinsed and drained but would not go thru wash cycle. We clicked the cancel button for 3-seconds to restart. Same problem. Called Lowes - Lady name Kelly continued to tell us we did something wrong. She would not listen and continued to say its Christmas EVE. Finally the workers came out to check it out around 4:00. Confirmed washer is defective and new washer will be delivered on 12-26-13. Confused as to the label on the machine says made with pride in America. Our 20yr. old Cabrio only lasted two years and went up. Never buy another Whirlpool product!

I purchased new and installed my heater in 2003. SN: 0253109845, MN: EE3J50RD0454. I started removing and replacing or cleaning heating elements in 2011: pretty good service. In 2015 I noticed black and brown water coming from the hot water taps. I opened it again, cleaned it, and realized anode replacement was required. That is when trouble started.I tried everything usual including 4 foot cheater bar, heating the coupling, impact wrench, tapping with a hammer, etc. Finally found a 700 ft-lb. pneumatic impact wrench on sale at Harbor Freight. After serious wear and tear on my air compressor and about 1-1/2 hours of work with the impact wrench, I got it out. The threads were messed up some, but I did not look close. I had to put the 1-1/4 inch head back in to return it to service while I found and ordered an anode. Could not get one from Whirlpool and could not buy one in Lowes where I bought the heater.The surprise was when I cleaned the threads to put the head back in, I had to use almost as much time and torque to get it to stop leaking as I did when I took it out. Then, when I did try to install the new anode, it required to same effort. Conclusion, There was some kind of imperfection with the threads in the coupling that messed up the threads on the initial installation of the anode, which made it nearly impossible to remove. Whirlpools quality control stinks. The next one will NOT be Whirlpool.

Absolutely the worst hot water heater I have ever owned. Broke within first year which Whirlpool sent me a replacement valve assy which I had to install myself. That one failed in 3 month and unit was out of warranty so I received no help from Whirlpool. Had a serviceman fix it again and it failed again. So I ended trashing the unit. I would not buy another Whirlpool product as long as I live. The last 5 appliances I purchased from Whirlpool all failed within a few months after warranty expired. This is no joke. Everything they sell is farmed out to other countries than the US and the workmanship and quality is the worst I have ever seen. The service people are nice when they tell you that they cant help you with your problem. Dont waste another dime on Whirlpool! Very bad product.

My double oven is less than 2 years old. I just used the self-cleaning feature on the bottom oven and now it wont work at all. I understand that this is a common problem with Whirlpool ovens and I will never buy another Whirlpool appliance again. What a piece of junk! I have used self-cleaning on my ovens ever since they were invented and have never had a problem before.

I came here to see if others have had problems with their Whirlpool Cabrio top load washers. I was amazed at how many others forked over nearly a grand ($1000 with tax and extended warranty) for such a heap of nothing. I have lived in the same house for over 35 years, same water supply with water softener. Over this time, I have raised my family and been lucky enough to only go through two washers until 2 years ago when I purchased this Whirlpool Cabrio machine at Lowes. As with others, clothes do not get cleaned. Residue is present and in the creases of the tightly spun and tangled load. After calling Whirlpool and Lowes on nearly day one of my original purchase, no concern was given. Instead, I received the What type of detergent or Could it be your water supply? or What degree of soil does your family have on their garments? A white terry cloth washcloth should not come out grey, even after bleach! My GE and Maytags of the past always did fantastic jobs. They just plain old wore out. As for my new energy efficient machine that takes 86 minutes to wash a load, with expensive HE detergent, an oxy clean pouch, special fabric softeners, I scratch my head wondering how can this be efficient? If a pair of jeans needs pre-soaking, it cant be done in this washer. Instead, I spray the jeans with pre-soak, add my HE products, then fill a mop bucket full of water and dump into the machine 5 minutes after the 86-minute session has started. What a joke! For two years plus, I have vented to my poor husband who thought he was buying me a new innovative state of the art machine to make my life easier. I only wish there was somewhere or someone that I could contact to get some satisfaction for my agony with this poor quality product! Yes, I am venting. I dont have another thousand dollars to spend for a new machine. Believe me, if there were to be a class action lawsuit for this lemon, I would be first to sign up!

I purchased a 12 year warranty, high end Whirlpool WATER HEATER (OR SO I THOUGHT AT THE TIME) through Lowes in 2014. Model ND50T122-403. Six years and multiple service calls later it is broken again, this time for the final time. I am ripping this garbage out. So livid with this company that could give a rip about their customers. Three years in to my 12 year warranty it started giving me problems. Horrible HORRIBLE customer service. They will insult your intelligence. Whirlpool will not honor the warranty or stand behind their product. They just take your money and basically give a shrug of the shoulders or worse blame you for THEIR TERRIBLE product failing. It may be unscrupulous and unethical but I guess saves them a pile of money which is what they seem to only be out.The Service Tech that came for the 4th time to repair it says they see this all the time in Whirlpool water heaters. Its a Design Flaw they say. I dont know about all that. I just know when I have been swindled. The electronics are garbage. The pilot light when it goes out is not easily reset as others have mentioned on this site. Will stay lit for while and then shuts down. Whirlpool says, despite reams of evidence to the contrary it must be a safety issue in the install, which they have absolutely zero evidence of therefore, they are not honoring the warranty. They are Blaming the installers, according to our service techs who tried to order the part thats supposed to be under warranty.The original installers, by the way were from Lowes, the outfit that sold me this hot mess. Another Class action lawsuit seems ripe. Or perhaps the consumer protection division from each states Attorneys General would be interested in protecting their citizens from practices like this. Lowes is complicit in allowing it, failing to protect their customers and not calling Whirlpool out for it. I cant think of a more deserving target of consumer protection than Whirlpool. A truly horrible, expensive experience. See the Whirlpool logo and RUN - - DO NOT WALK -- THE OTHER WAY!

Im going to add my 2 cents to the already poor reviews of this dishwasher. Ive been disgruntled about it since it was first installed. The silverware rack will not stay shut, so when you go to shut the door all the silverware falls into the bottom of the washer. And its totally rusting. All the pins in the carriage are literally rusting away. This is a faulty washer and Whirlpool needs to find a way to repay their customers. Ill never buy a Whirlpool product again.

Whirlpool Cabrio washer - I had all the same problems as all the 900 others on this site. After 7 months, it died. The factory repairman told me it needed a new transmission and motor. I returned it to Costco for a full refund and did a lot of research and bought a Speed Queen. It has no computer. It’s just an old-school washer that cleans, and best of all, it’s made in the USA with a 10-year warranty.

I have been given a runaround for over a month to get my refrigerator fixed. They gave me a defected piece and it broke down in less than a year. I have been calling them up every day and they put me on hold forever-then they ask for all the details and direct me to another company. As of right now I have not received any help-My family is really frustrated as we have no fridge all this time. I dont know what to do.

We purchased a Whirlpool Cabrio washer in 2009. It makes awful sounds during the draining and spinning cycles, has started leaking in the past month and now, several error codes and will not finish a load of laundry. We have a family of eight and thought that we had bought a very dependable product for what we need. Boy, we were wrong!

When I first purchased the dishwasher I had to call Whirlpool to come out because although I was using a drying agent as Cascade, the dishwasher lower door remained wet causing water onto the utensils. Whirlpool came out and said it would take a few washes until the inner part of the D/W would acclimate to the drying agent. Well the lower door where the utensils basket sits does not dry in its entirety so its a defect, not the drying agent. Also, the decibel 55 is quite loud we cant run the dishwasher during the day, its too noisy and distracting.

We bought a Whirlpool freezer-bottom 18.5 cu ft. fridge from Lowes. The compressor broke in less than three months of regular use. I called Whirlpool who sent A&E to check it out. The technician didnt even file a report and lied to me about what was wrong with the fridge. They sent a different company to come look at it and they confirmed that the compressor is broken. I called Whirlpool customer service and was told that the warranty only covers repairs not replacement even though I paid over $1,000 for a defective product. The excuse: Its a man-made product so we cant guarantee it! So what used to be a 3-5 year warranty not too long ago is now what? A one-year warranty is virtually useless. I can see a future not too far off where there is no warranty at all. Where is the protection for the buyer? If I wanted to purchase a second-hand fridge, I would have. I will never buy Whirlpool again.

Im guessing the company that makes Whirlpool appliances no longer make dependable appliances… bought home 2 yrs. ago. Bought Whirlpool over stove microwave and expensive side by side fridge. After 1 yr. microwave stopped heating. Now my fridge is no longer cooling. Have cleaned it underneath, did all a normal person would do. I replaced my microwave last year with a Maytag. I’m sure I will have to replace the fridge very soon. My stove is a Maytag. Dishwasher a Frigidaire... have had no problem. Just the Whirlpools… Will never buy another Whirlpool. Not just me, my niece bought a microwave. Her stopped heating after one year.

Weve owned this refrigerator for about 6 weeks now. It is a 23 cu. ft. model with a bottom freezer. It is working great, and we have no problems with temperature control in either the refrigerator or freezer sections.

The machine never allows enough water to clean the clothes and I do not have the option to add more water or to spin the clothes again. The maker of this machine must think that people do not have the ability to know how to wash clothes or think for themselves. I need a washer that I can tell to add more water or just spin these clothes again. Very disappointed. I need an older model that I can control.

This washer was purchased on 12/21/2007. It was in a vacation home that was rarely occupied, therefore washer not used much. On 7/23/2008 the cycle switch was replaced. On 7/20/09 the same problem occurred. The washer may have been used 5 times during the year. The handle and rim also needed to be replaced. On 8/31/09 the switch and handle were replaced again. On 2/5/13 the door latch was BROKEN AGAIN. Now on 7/10/15 the door latch, start switch and cycle switch are broken again... DO not buy WHIRLPOOL products.

This same problem occurred about a month later so I called Whirlpool. They sent out an entire new thermostat assembly which took me about an hour to install. The hot water heater has worked correctly ever since.

We purchased a Whirlpool dryer almost three yeas ago. Its a front load, steam dryer--or WAS should I say. Almost a year ago, I was unable to calibrate the control panel (in other words, to change the cycle). Ive been advised by the tech that I need a new control panel $200. Really Whirlpool??? A $500 dryer that lasts two years?

Cleans dishes very well, a bit noisy maybe that just the model I have. Exterior is very nice, interior there is plenty of space for the dishes and pans. There are no streaks on the glasses. No soap scum left on the dishes at all, very good unit.

The damper switch at the top of my water heater, one I purchased at Lowes stopped working. I talked to someone at the local store, and I was told I had to contain the manufacturer. I called the number on the front of my unit. The tech talked my husband through the restart process...not once, but on two separate occasions. We were told that because it was intermittent, something they decided Over the Phone, they could do nothing. They would neither send a replacement part nor a technician. By the time we had to call back two days later, restart was impossible. JUST to get the part, a specialty piece, we now have to pay for expedited shipping! And either install ourselves, or wait 5 days After Arrival (!!), to get the stupid thing fixed! If they had sent the part out originally when we asked, we wouldnt have to wait for hot water or pay anything for a warrantied piece! Its a racket. Stay away!!!

The washer does clean simple stains. The clothes end up all twisted (sleeves & pant legs). Antiperspirant gets transferred to dark clothing. Large loads do not get clean and the response from Whirlpool was run everything on hot and for longer than normal times. The enviro rating and low water usage claim has resulted in a machine that does NOT fully clean clothes. Look elsewhere and do not buy.

My Whirlpool dishwasher washes dishes well, when it drain but it will not drain. I purchased insurance repair service from AIG. AIG is a total rip off. I paid them over $300. I have called many many times. They promise someone will call but not one ever has. I would never work with AIG or Whirlpool ever again.

We have had our range for over one year. The main problem is that the large burners are in the front and the small burners are in the back. This means that when we are using the two front burners we cannot access the rear burners safely. (What country provided the engineering design for this?) One minor problem is that we cannot get used to the burner control arrangement. The outside controls control the front burners and the inside controls control the back burners. Our old range was the right control for the back burner and the left was for the front burner. Another small problem is that there is no back to the pan drawer. So, with the drawer full if a pan move when the drawer is shut it will be scraped off the drawer and fall into the back and becomes hard to reach to remove.

We just purchased a new fridge - September 2021 -- Whirlpool side by side. Why is just okay? It is a loud refrigerator. A roaring sound is pretty constant. The ice tray in the door has no recessed tray ... so water and melting ice just follow down the front of the door and onto the floor. Two days after purchase we went back to Lowes to return this fridge ... but all the other refrigerators do not have a recessed ice tray. And since they are not plugged in ... who knows if they roar.

I purchased a new style topload washer (Whirlpool) without the center post approximately one year ago at Lowes and have had nothing but problems with it since day one. It does not clean the clothes and will not spin.

We purchased the Whirlpool Gold Gas Range (model #GW399LXUQ06) in November 2011. Last week, I noticed the porcelain enamel finish on the stove top grates has fallen off in pieces. I contacted Whirlpool today, February 14, 2012, about this issue and they advised me it is a cosmetic problem which is not covered under the warranty. They advised me that it would cost over $100 per grate to replace. We have had this stove for less than three months and I feel these grates are defective and Whirlpool should be responsible for replacing them. I am very dissatisfied with this stove.

Whirlpool washing machine was not a good buy at all specially after using it and seeing that over the years I had to incur high costs of maintenance. Over the months and years of buying Whirlpool front load washing machine, I had to replace motor twice, digital display twice, motherboard twice THAT TOO at a very high price every time something broke. This time the angle that supports the drum broke and Whirlpool says drum needs to be replaced. HOWEVER, after waiting a month company says DRUM IS UNAVAILABLE. Which means my machine has become absolutely useless just because Whirlpool does not have the spare. Whirlpool has a ridiculous track record with poor service and poor product quality. Manufacturing in one country and selling it in another WITHOUT SPARES is defective and poor service, totally unreliable. Wouldnt recommend Whirlpool to anyone.

We are having our second major issue with our Whirlpool Refrigerator Model WRF757SDEM but unfortunately at 1-1/2 years old, it is out of warranty. Although the certified repairman says that the issue with the thermostat is a known issue and the company created a whole new part to fix the problem, there is no recall. Customer service was lousy. They deny any know issue (again, they created a new part they will sell us to fix the issue) and they mocked us for not buying their warranty after having the first problems with their fridge. This new problem will cost over $300 to fix. Why is there no recall if they knew about the issue?

My mother-in-law purchased a Whirlpool refrigerator in 7/2010. It broke down the first time in August then consistently after that. We have had repair people out multiple times and the issue continues. I called Whirlpool and they said since it was purchased more than a year ago, it is not their problem. You would think that in all that time they would have found a way to repair or replace it. To make matters worse, we have had to call hospice in to care for my mother-in-law, all she wants is to get ice and water out of the door.

I came back from vacation and found a sheet of ice at the bottom of my freezer, just like that lady from SC and some vegetables frozen in the vegetable bin; not very happy. Have not contacted anyone yet, but I’m very unhappy about this situation. This refrigerator is less than 2 years old; I’m afraid of putting anything in this unit as it is very undependable.

The freezer has never been able to produce ice cubes, so, took the ice cube maker out, and bought plastic ice cube trays. Not what I paid for, but it’s cheaper than having to buy another fridge.

My washer is a top load, energy and water efficient model. I am amazed at how little water it uses and how well it cleans. I do have two issues, the capacity looks huge but it will not take a queen size and double sheet set in the same load. It unbalances and then cant seem to get going again. The other issue is that you cant pause the wash and adjust things, you have to cancel and start over.

After 5 service calls for cooling problem, under extended warranty, refrigerator was replaced. Had purchased 3 water filters directly from Whirlpool before problem. Could not use these filters in replacement model. In spite of that fact & filters in unopened factory package, Whirlpool would not refund the $100 purchase price because I DID NOT RETURN THEM WITHIN 90 DAYS OF PURCHASE, even though I wrote to their US president. Really unfair treatment & they could care less that I had to replace a defective product.

Bought a French door whirlpool gold, wanted a good long lasting fridge. Bought in late 2011. After having it a couple of weeks we noticed the ice maker would take days to make ice. So we called to have it looked at. The repairman said if it is slow, switch it to fast ice. It made ice even slower, but the repair company said if it is making ice, and he comes out, we would be charged. So we lived with it. In 2014 it stopped making ice at all. We called they sent someone out and said it was a control board. They had to order it, and came back a week later to put it in. They left and said we would have ice soon. Never did!!!So we call again, they come out and said no power to ice maker. He called Whirlpool and they said wires in the freezer door were worn and broke. Well the door is non-serviceable and the cost of the door will exceed the price of the fridge! What kind of crap is that!! Long story short I will never buy another whirlpool again, and when I hear of someone buying new appliances I warn them to stay away from whirlpool!!! Run!!!

Five years ago I bought a brand spanking new HE set with a top load washer, top of the line Whirlpool. That washer has been a piece of junk and getting it serviced has been a nightmare. It broke, i.e., the computer part, and was out of commission for FOUR MONTHS. I live on an island off of Alaska, luckily I rented one for the duration but STILL. That was an EIGHT HUNDRED DOLLAR MACHINE. I liked that they are new and shiny and look cool. I hate that the electronics broke after a few years. Ive had washers dryers that lasted TWENTY YEARS. The next set I buy will have plain buttons for cycles and NO ELECTRONICS. None. And still none. Electronics instead of plain buttons. Im not kidding, I will never buy another one with electronics. I bought a top of the line Whirlpool HE top loading set for over $1400 five years ago and that washer has been a bust. I have had a repairman out over 5 times and the last time he took it out and kept it in the shop for FOUR MONTHS. I will never buy a fancy set again. I will buy the old kind with the plain old buttons. Do not make this mistake yourself! Just buy a plain old one!

I purchased this stove online and have been very happy with the features. I am able to use alternate settings based on the size of the Pan/pot. Cook timer, light, variable rack displays, etc. The only negative feedback is the need to add 5-10 minutes more to the temperature, based on the recommended cooking time of your recipe.

My Whirlpool super capacity 465 started flaking out on the temperature and burned our dinner. I had a repairman over to repair which he did after about 3 hours of testing. Less than 6 months later it did the same thing. Overheating in the oven.

My machine has been ripping clothes for a few years but I thought, initially, that it was a snap, zipper or hook causing the problem. I recently got fed up and found this: **. It makes it pretty clear that it is a manufacturing defect. I called their customer service centre and spoke to a supervisor that told me it is normal wear and tear and that perhaps the glass in the door had worn out. Yes, thats right, she said maybe the glass has worn out.They are offering ZERO assistance in what would be a $500+ repair for me. Admittedly, my machine is five years old and out of warranty, but to me, when the repair is to install an entirely new style of door so that the clothes no longer get caught underneath, it is a defect. 43 different models of their machines are included in this issue and it was identified in 2012, a year before my machine was made. Why didnt they correct it before that?

I have had this Cabrio washer and it seems to be going well with the washer and I have done lots of laundry from this washer and it seems that it works well and I would recommend it to people and people would like to get their laundry done and people can choose what kinds of washers they want.

Ive bought a new home and I purchased a brand new Whirlpool black oven range. First, a piece of metallic on top of the oven broke. I couldnt believe it. And the biggest problem is that whatever I do to clean the top surface, it always leaves a stain. After a few months, the oven looked like 10 years old piece. I called whirlpool and talked to a customer service rep, he told me that I needed to clean the surface immediately after something spill on it. To make sure if I understood it right, I asked him You mean when I am cooking some rice and some water spill out, do I have to remove the pot and clean the surface and repeat that all along while I am cooking? BELIEVE OR NOT, THE ANSWER WAS yes. I cant believe the bad quality of this product and worst, its customer service defensive attitude. Dont buy this product.

I like my machine even though there is no agitator. It is a top loader so it does not smell. It is a water saver which, when I first got it, I thought that it could never clean the clothes in that small amt of water...but it does clean the clothes very well.

I bought a Whirlpool washing machine, model WTW4855HW, and was I ever shocked at how noisy it was. The wash cycle had a grinding noise that was just too much. After 2 loads I sent it back and didnt regret having to pay the restocking fee. I just couldnt believe that with all the technology we have today, that they couldnt build a quiet machine. Im an engineer so I know there are methods through gearing, belts, soundproofing, etc, to produce a quiet machine. Remember the dishwasher of days gone by. You couldnt watch TV with the dishwasher going. Nowadays, you can stand in the kitchen and have a nice conversation with it running. The technology exists. As a matter of a fact, my old Maytag that finally went bad after 10 years was fairly quiet. So, if you dont have your washing machine in the garage or basement room where you can close the door, dont buy this machine! Bruce in Portland

Our fridge was delivered the 24th of Jan. We called on the 19th of June because the fridge stopped working. The 24th Capital Refrigeration came out and said he ordered the parts, they would likely be there on the on Fri. the 28th. On the 5th the parts werent in yet. On the 5th of July I called Whirlpool to find out whats going on and the parts were on backorder. They would expedite the parts. The parts came in the 12th. Our Whirlpool refrigerator was delivered on the 24 of Jan. It quit working on the 19th of June so we called Lowes. They hooked us up with Whirlpool. They sent a tech the 24th. He (Mike with Capital Refrigeration) left saying he ordered the parts and they would likely be in on that Friday the 28th. I call Lowes on Mon. the 1st. They hooked me up with Whirlpool and they said the parts were being shipped that day and should be to Capital Refrigeration on Fri. the 5th. I called on the 5th and now the parts are on backorder (they didnt know they didnt have the parts). So the parts came in on the 12th. Capital Refrigeration came out, installed all new circuit boards. That didnt work, still no fridge (he suggest replacing the fridge but Whirlpool says no). So he orders new parts. He comes out on the 17th and installed new parts (coils and stuff). It worked for 3 days and quit again, I lost my food again. I call Lowes again. They hook me up with Whirlpool. They say theyre sending a different company. On the 19th A1 Quality Appliance calls, set up appointment for 23rd. The come out and say they are ordering the parts on the 25th. They say that Whirlpool said parts would arrive Mon. the 29th. On the 30th A1 Quality said the parts arent in but they have us scheduled for Wed. the 31st. NO PARTS. I called whirlpool and now I find out again they dont even have the parts again (they dont know they dont have the parts). They are on backorder and in a week call them to see if they have found the parts yet.So at the end of a week (the 7th of Aug.) Whirlpool said to call and see if they found this part yet (maybe not). It will have been 7 weeks without a fridge that broke when in use less than 5 months. They have told us the parts would be here 3 times and then find out all these parts have been on backorder every time. The 1st repairman Mike at Capital Refrigeration advised to replace the unit but they are still dragging this out. They did send us $150 for the inconvenience (not for all the food we lost). It would appear it will be 2 months before we have a refrigerator again if we are lucky. Whirlpool is a very poor company that has misled us several times and are still doing so. We purchased their refrigerator, double stacked oven, microwave and dishwasher and are very sorry. They say they record the calls if there is any doubt about my facts.

My washer is at least 15 years old. When we bought it we had two school aged children at home. My husband and I now have an empty-nest and we have not had any service calls or break downs since we purchased this machine. It still cleans our laundry very well and we are getting our moneys worth from this washer.

I am also disappointed with this manufacturer. I recently purchased an over-the-range microwave oven model KHMS2056S. Within 45 days of use, it quit heating. I initially established a service call through Kitchenaids web site, with the first available weekend appointment approximately 2 weeks away. When the contracted service represented arrived (A&E), he asked me for a cup of water and placed it in the microwave, along with a temperature meter. After running the microwave for 45 seconds, he informed me that microwave was not heating. This was the extent of his troubleshooting, only to confirm what I had already reported in my initial service appointment description. The next step was to order parts and wait another 10-20 days for a new service appointment. When I challenged the technician on this, he stated that they were required to verify the problem and check the model/serial number of the appliance. But these were also provided through the automated service appointment system. Thanks to Lowes who allowed me to return the item, even though the purchase date was outside the 30-day window. It seemed obvious to me this warranty contractor was simply creating multiple service calls to inflate the repair costs. And ultimately the consumer pays this.

In the last two years I have purchased a new Whirlpool Duet washer and dryer with base, Whirlpool Gold refrigerator, and (less than a year) a built-in Whirlpool microwave. I have already had to replace the gaskets on the washer, which required a $65 deductible. I had to spend $65 on my service contract deductible for my dryer as they have had to order me a new motor and thermostat. My refrigerator had an appliance bulb as required installed; however, it still burns the plastic covering. I have not called on that yet. My microwave, which is less than a year old, has a small crack inside the door and part of the handle has broken off.

I bought a Whirlpool microwave oven last year.The last one year, it has worked fine. The day after the warranty period was over, the microwave oven is not working .The rotating part is not rotating, so I called your customer care center. They sent one guy to trouble hoot, he said that the rotating part is faulty and I need to spend around Rs. 3,500.00 to rectify the problem .The cost of the microwave oven is Rs. 6,500.00.How can I spend Rs. 3,500.00 to rectify the problem? That too, how it happened the day next to the warranty period. Now, I have a doubt that as I purchased the article in Saravana Store T Nagar/Jayachandran stores in T Nagar, whether I am getting such kind of problem. Because when I purchased, they gave me a lot of gifts. That time itself I suspected.I trusted Whirlpool Company. I heard that Whirlpool Company is good so I purchased a double door fridge 5 years ago. The same problem I had when I purchased the fridge, the day next to my fridge’s warranty period, it happened to me. That time, I did not think like that. But now, the same problem happened to my microwave oven. So, I am suspecting about the genuinity of the Whirlpool Company. I am totally dissatisfied about the product of the Whirlpool. I will give you my microwave oven. You take it freely. You can use my microwave oven for your demo purpose. So that in the future no customers will have problem which I had. Do reply to this mail and let me know when you are going to come and collect the article.

I have a lower end 4 burner model but I love it. Both power burns are in the front (I would change that) and electronic ignition. The oven temp is true and heats up quickly, I bake upwards of 700 cookies at Christmas time. Even being a lower end model it works great and I use it everyday. I think it is more energy efficient than the model that I replaced, which I replaced in order to have the electronic ignition. I would recommend this Whirlpool Range!

I purchased a Whirlpool washing machine (model: AW01D8810 S silver color) and a Whirlpool refrigerator (model: WBM329 TI) together from United Arab Emirates for Dhs 1999/- & Dhs 1199 /- respectively on 28 Jan. 2011. I sent this machine to my hometown (India) in the same packing and I used the washing machine only for three months and found a complaint. I informed this to service center in Trivandrum, Kerala. Their team came to my home and told me that warranty cannot be given as I purchased machine overseas. They added that the PCB for the machine is having complaint and they dont have stock in India. Also, the machine is no longer available in the factory. The Whirlpool company completely stopped manufacturing the abovementioned model. Again, I came to UAE and contacted GEC group of companies for the PCB part. I got a quotation for PCB Dhs 425/- but the items is ex-stock with them. The machine cost only Dhs 1999/- and if I spend Dh425/- only for PCB, and the machine is with me for the parts since one and half years. I dont know what to do. If I spend another Dhs 600 + this PCB cost then Id rather go for another new branded washing machine. The model of machine is AWO1D8810S and serial no. is 12 nc 859247463000 003. Please advise what to do or if I can find the PCB in Kerala. What will be the cost? I am ready to pay the money for PCB but not for the above rates. Please advise, sir.

We have had our Whirlpool for 6 months. It doesn’t always keep things uniformly cool. Oftentimes some items are frozen while others are not. The water dispenser button leaks in a dribble down the front of the fridge after each use. The drawers do not move easily when they contain a moderate amount of food. The freezer works great. All in all it does a decent job but I definitely wouldn’t consider it one of the best.

I purchased the refrigerator (WRT3L15ZYBOO) from a reputable store (Lowes) on 10/15/11. 15 months later it failed. The service tech diagnosed complete loss of refrigerant. Cost for repairs would be more than half the purchase price and the wait for parts would be weeks. Contact to Whirlpool customer rep (Brittany) said no assistance was available, even for obviously a defective product. Solution: I had the store remove the defective appliance and purchased a new fridge (not Whirlpool) at about the same price it would have cost to repair the defective one. With delivery within 3 days, I likely saved time and money over dealing with Whirlpool. I had purchased a Whirlpool stove at the same time and am feeling quite anxious about it. Consequences: I plan to purchase a washer/dryer in the next year. No Whirlpool products considered.

We purchased a Whirlpool Cabrio Washer and there is a bearing problem (which seems to be the common issue reported). The washer is unusable at less than 5 years of age.

The washer started to show error code for the door and washer would not restart. After removing the top of the washer and checking the door switch to see if there was a loose wire, I traced the wire back to the micro control unit, and upon inspection of the micro control unit, I found that the terminal that the door switch wire was attached to was loose and not making contact with circuit board.Although the washer is out of warranty being 7 years old, this is clearly not a part that is subject to wear and tear. The part was clearly manufactured poorly. I looked on the internet to purchase a new part but it seems that all micro control units are out of stock. This makes me wonder if one should start a class action suit as my part could be one of hundreds that was poorly manufactured. I called Whirlpool to see if they would send me another part to replace the bad unit but they said that because the washer was out of warranty, they could not help.

Our first Whirlpool washer barely lasted 1 1/2 years. They replaced it with another one that broke within 9 months. When it worked, it was great... When it didnt, it either overflowed or did not wring clothes tightly on the second rinse.

I have owned Craftmaster 30-gallon hot water heater and the only things reliable about it is trouble and aggravation. I purchased this in 2004. I have had to replace the controls, valves, wires, etc. three times in 10 years. And Im now looking at doing it a fourth time. The design of these parts are utter crap! Cheap plastic! After replacing these parts, this hot water heater works great for a few years, then invariably starts acting up. The pilot light goes out when the heater is supposed to kick on instead. Getting the pilot light lit again, is an exercise in futility! The red reset button once released, immediately extinguishes the ignition flame. Supposedly, after holding it down for 1-2 minutes allowing gas to build up, it should light the coils... and if it doesnt, youre supposed to wait 10 minutes to try relighting again. You can repeat this process for 12 hours, and if you finally do get this temperamental piece of junk to light, youre lucky. Customer Service has been useless in assistance. All they want to do is send you e-mail, and get you off the phone. Not to mention, Ive been told by many a rep that the hot water heater extinguishes itself, if water is overheated, and that it must be my fault for setting the temp too hot. Baloney... Ive been told that the underside vent must be cleaned every few months, so that air flow is accurate. Makes no difference one way or the other. And recently, Ive been told by a rep, that my 40-yr-old house likely doesnt vent exhaust out through the roof properly. This product is inferior and unpredictable. Its great when it works, and the pilot light stays lit. God forbid it ever goes out though! It is next to impossible to relight. I have spent more money on service technicians attempting to repair/replace parts, than it would have cost to simply by a new hot water heater. I miss the old days, when it was easy to light a hot water heater: Strike a match, turn the gas on, and instant hot water. No muss, no fuss. Having owned many properties w/ hot water heaters over the years, I have never encountered such repeat problems, as with this product. Its simply not reliable, and not worth the $$$. Never again, will I buy a Craftmaster Product. And I had no clue that there was a Class Action Suit filed, and a settlement involved in these faulty units. Whirlpool/Craftmaster should have notified everyone, who purchased one of their units. Now Im stuck w/ a constantly broken unit, and zero recourse. I will never buy anything Whirlpool/Craftmaster again, as a result.

We have front loaders. Far, far less damaging to the clothing than a top loader with agitator, would never go back to top loader. That comes with a caveat though. There is a difference you may not realize between the two styles. With a front loader comes a little maintenance. You will need to clean the washer periodically. Most all the stores sell the cleaning tablets and no, not all cleaners are created equal. I will only use Affresh after testing most of them. With a front loader there is always some water in the bottom of the drum, even after the cycle ends and even when it looks empty. So if you wash real dirty or smelly things, you’ll want to run an empty cycle to rinse out that leftover water or run with cleaner.In between wash days you’ll need to leave the door open so it doesn’t mold or mildew. The door gasket/seals will show mold and mildew and or you’ll get a mildew smell in your clothing. The only issues we’ve had with these units were the learning curve on front loaders in general and with the dryer we had the water valve for the steam function stick open (after 5 years) but it was due to calcium build up from our well water, not a issue with the machine itself.The dryer lint screen could be better. It is vertical so as the lint builds up during a cycle it drops to the bottom and accumulated at the bottom falling off as you pull it out each time to clean it. The lint catches on a crazy amount of extrusions inside the lint trap which also makes it nearly impossible to get down in and effectively clean all the crap out. One last thing if youre changing from top to front loaders. Buy the peristalsis, they’re expensive but it’s a pain in the butt to get stuff out if you don’t have them. Overall we’ve been very happy with our Whirlpool front loaders and would confidently recommend them to you.

We bought a refrigerator Model# WSF26C2 EXB last June 2012, and it broke down! Our one-year manufacturer warranty did not cover for any food loss. We would not recommend Whirlpool refrigerator to anyone. We called at 12:30 pm and they could not send anybody out to repair the refrigerator until the following day. Bottom line is, there is no compensation with Whirlpool.

I have had trouble with this AccuBake stove since four months after I bought it in 2011. First, the clean cycle would work intermittently then would not ignite to bake, broil warm or clean. All burners would light intermittently. Every time I had trouble, I called the service tech from Homestead Lumber, where I purchased the product from and he could never find anything wrong. Product would work fine whenever he came out. Finally, it acted up in May of this year while the product was still under warranty and while the service tech was here. The tech replaced the circuit board. One month later, Im still having trouble replacing igniter. Four days ago, Im still having trouble. This stove stinks. Right now, I wish I had my $959 back for the stove and wish Whirlpool had it stuck up their butt.

lD and UL codes are displaying. The UL code displays when the load is even and also displays UL load when I take all clothes out of washer. How could the load be uneven if there are no clothes in? I have had four different issues with this washer. I have started use on this washer in Aug. 2008 and there have been already three major repairs. I am a very dissatisfied customer. I dont know if I should spend more money on washer repairs or just buy a new washer. Please help.

Bought a standard 18 cubic foot top mount Whirlpool when moving into my first apt. The refrigerator cost a little over $500.00, is spacious and energy efficient. No ice and water in doors and no chip boards for any controls but still working perfectly. It is now 30 years old and never even serviced. When buying appliances get basic, do the job units and nothing with chip boards. They are still sold today and the fridge I have costs less now.

Whirlpool electric range oven wont turn off. Used the oven 2 or so times per year.... Very unsafe, expecting internal breaker that would shut the thing down. Whirlpool Range/Oven PT3196685 happened on 6-10-2014, was baking cookies with timer on for 9 min. First batch turn out good, 2nd batch on fire before even get to 6 min, the burner is brightly hot and cant shut off from the panel... Saw ERR then COOL indicator... Tried but no respond from panel. The burner element wont turn off and temp keep rising white hot... The only way to shutoff is the house circuit breaker. But soon you turn on the breaker, the oven would turn on by itself and you cant switch it off. Where is the safety breaker on these range/oven when something goes beyond 500 degree..... UNSAFE PRODUCT. Ordered a new Whirlpool Gold 700 series but canceled after discovered others experienced similar situation with the new product. Could have burn down the house and worst when lives involved. WONDER IF ANYTHING WAS DONE TO CORRECT THESE SAFETY ISSUE.

I have a Whirlpool top-loading washing machine model 3LA5580XSW3. The timer switch is not working and I have been told that spares are not available. Is this true? Everything else works well. Please advise as I really need a new timer.

This washing machine is a piece of junk. It broke down exactly 2 days after the one year warranty expired. Home Depot said there was nothing they could do and Whirlpool said the same thing. This washing machine was not used on a weekly basis. It perhaps washed 20 loads during the course of the year. I had many issues with the sensors before it broke down completely. Sometimes, half the clothes would be dry after the entire cycle. I was so angry that I had a local independent contractor come in and look at it. He said the motor was broken and needed to be replaced. So much for $700 down the drain. I will never buy a Whirlpool product again. This was the worst experience Ive ever had with an appliance.

We bought a small refrigerator/freezer Model WRT112CZJZ for a guest house. When not in use it was turned off at the unit control panel with the doors left open. There was a power failure and when the power was restored the refrigerator turned itself back on. Needless to say it must have been running for 2 weeks with the doors open and the condensation filled the holding tank and then proceeded to overflow on the wood floor. The floor was ruined. There was no indication in the manual to warn of the unit restarting when power is restored so it must be unplugged or the circuit breaker turned off to avoid a similar problem.

Do not buy Whirlpool or Maytag appliances. They do not stand by their products. We have purchased 2 washing machines in the past 8 years. Both of them quit or broke almost as fast as we got them. The customer service agents were pleasant, but they would not help us at all. The machine we purchased has a design flaw that they will not acknowledge. They have been contacted by us several times and cant fix the problem. They need to correct a design flaw that is in all their machines.All of our clothes get encircled around the agitator and the machine gets off balance. We have to untangle our clothes from the agitator and pull them apart by hand. They make bad products, including a Whirlpool refrigerator that broke within a month of us buying it. They care about selling these crappy machines. Buy a GE, Bosch or LG. You will get a machine that works properly as soon as you hook it up. We have had their representative out several times to our house and they could not repair it. The repair techs have told us that Maytag and Whirlpool clothes washers are no good.

I purchased the Cabrio washer/dryer in 2006. We have had it repaired 6 times and I even purchased a two year extended warranty after having issues with it the first year. Now I seem to be in the same boat. The washer will not spin and drain. This has already been looked at by a technician several months ago. I feel like this product is faulty and has not worked properly from the start. Are there lemon laws for appliances? It seems that this product would qualify. I will never purchase Whirlpool again.

Bottom freezer had frost and water. And ice maker began leaking and ruined the new wood floors that we just had put in. This is the forth whirlpool item I have, either had to have replace or fixed. Emailed and called several times. Customer service is terrible. All products bought within the last five years.

I bought Whirlpool gas water heater on July 2009. It keeps going out. It is not working. I found out you cant even get parts for fixing it. The dealers told me its junk. I was told to buy a new one. Then, I found out its been in class action lawsuit. How did I get to buy it after it was recalled? I dont know what to do.

My landlord purchased a new Amana washer (NTW4605EW0) Labor Day weekend 2015. It started having issues in the spring, so we went through the process of utilizing the manufacturers warranty. Apparently, Amana, part of Whirlpool, requires 5 attempts at repairing the machines before replacing. Okay, so starting in June 2016, we arranged service appointments 5 times and replaced 1 part, then another, 4 times. Clearly, that part is defunct. Right? Fast forward to September and then into October. Get a new washer, and not the one I preferred. We got the Whirlpool WTW4816FW1. Before the installers leave, we are having the SAME issue. Stops midcycle, doesnt finish cycle, sometimes stops while filling, or while full, or kid wash, or mid drain... But now with the new washer, the drain and spin cycle thinks it should FILL instead of drain... and Whirlpool said they would get someone out the next day, a promise they cannot keep because they dont supply the repair guy, they source with local companies. So, the company ordered 3 parts... That could be the problem. And 4 days later, 2 parts are on freaking BACK ORDER. Parts arrive. All new parts replaced. Machine still doesnt work. Outlet tested by us and them and it is fine. The techs think there is some kind of RF interference. Turn off sensor light, which is on the same wall, unplug power to wifi router (which outdates the washer). Still, doesnt work.I have spent half my week, every week, since June, restarting my washer, unplugging the damn thing, waiting, and waiting, trying again and again and again to wash 2 loads of laundry a week... Literally takes a week until the damn thing does its job. Whirlpool is sent us a replacement washer. Can you guess what happened the first time we started it? SAME ISSUE. Cycle will not complete. Sometimes it dies before it even fills. Sometimes it dies while filling. Sometimes, it will fill and fill and drain and fill and fill and drain and... never stop filling. Or, the fun one, the drain and spin cycle thinks it is suppose to fill. Continuously. And then, suddenly, after unplugging it for 1 hr, or 24, or 72 hrs, it will work fine for 1-7 cycles. Nothing is consistent except that it doesnt work consistently. HAS ANYONE HAD THIS MUCH TROUBLE???

Leaks water on bottom. Door seal dont go far to under door, is from manufacturing defect, is water overflow or is something else. Dishes washer is about 10 years older. Very real disappointed and wont buy this brand again on dishwashers.

I purchased my Whirlpool Cabrio Washer (WWT5640xw0) at Lowes in East Orlando in 2009. It has worked without issue (other than a slight odor) from then until today, 5-1-12. It has now refused to agitate or spin any clothing, it emits a slight burning smell from the basket, and the basket, when it does decide to spin, spins about as fast as a merry-go-round, banging into the sides of the washer (causing the metal on the sides to bulge out every time it strikes them). It is self-destructing.I called Whirlpool, and they simply refused to address any questions, once I told them that I did not have an extended service plan and that my unit was older than 12 months. I informed them that I refused to pay for an ESP, because I refuse to pay additional monies in order for the product to perform as advertised. They were rude. I said bad words. The call ended.$600 was gone. And I now have to run out and buy another washer, and I can promise you it will not be a Whirlpool. I am a local law enforcement officer. I would love to speak with an attorney about this if a class action suit is pending. I am beyond pissed. My moms chartreuse-colored Maytag still works after almost 30 years of service to our family. It required a new drive belt at somewhere around year 17. The belt cost $45.The Whirlpool CS rep informed me in a surprisingly snarky fashion that it would probably cost over $360 for the total cost of repair and that the only way to know exactly how much is to schedule a service call. I was also told that I would be on the hook for $100 for the service call even if I declined the repair.

My oven was a lemon from day one. The light bulb would not light, the oven would not come on. Had the repairman in cause it was under warranty, he replaced the gas valve. A month later the same thing happened, the oven did not light. Have been putting up with this for a little over a year, it is finally off warranty. Same thing happens, you go to cook something and it will not light, then the oven door broke! We had to pay to have a new hinge installed. Whoever heard of a oven door breaking? I have had ovens 40 years old and they still work and the door doesnt break. Needless to say, my oven is still doing the same thing, lights sometimes and other times does not. Called Whirlpool several times, they are nasty and wont stand behind anything. Customer service says there is no lemon law for stoves. I will not ever buy another Whirlpool anything and that is not a threat but a PROMISE.

Bought refrigerator in Jan of 2019. Quit making ice in Oct of 2019. 3 service calls and felt like it was band aided until manufacturers warranty ran out. Now waiting on new freezer door to be made. 6 to 8 weeks out. We will see. Called Whirlpool and was offered nothing. No customer service whatsoever. Will never buy another whirlpool product again.

I purchased a Whirlpool dishwasher from Home Depot on 2/5/2015. It was delivered damaged on 2/9/2015. Home Depot refused to take it back and Whirlpool sent a tech out to see the damage. I told them I did not want a refurbished dishwasher that I paid almost $1000 for. Whirlpool advised Home Depot that the machine can be repaired. Once again I told both whirlpool and Home Depot that I did not want this dishwasher and to pick it up. Home Depot stated that there would be a 15 percent restocking fee along with a $65 to pick up the washer. Why should we have to pay anything? I am so disgusted for the treatment I received.

Our microwave is less than 8 months old, hardly used and only for heating items. Besides the point, being under a year old. It began to make noise and pop, spark sounds with the smell of burning wires and promptly stopped working. We called the customer service line and began the long frustrating circle of completely bizarre conversation. Maintaining our belief this is a fire hazard and not wanting it in our home they insist on a repair person coming after trying to sell us Extended warranty, Why would we want Extended warranty when the warranty is NO warranty, it seems, whatsoever. After requesting to speak to a supervisor 3 times. A overly bubbly person comes on the repeat same spiel and to make an appointment for 1 week away from 8am to 4pm to be available for a phone call to make an appointment to see about repair on said fire hazard microwave that is less than a year old. This appointment is made with repair place and they too are confused and noted Whirlpool said this is not covered under warranty, and they too would contact them.Today Whirlpool Canada calls and gives number to repair place to book appointment, Hello we already have one and the frustrating verbal dance continues. 5 minutes after this call the repair place calls, as whirlpool contacted them as well to book appointment, which we both could agree this is the bizarrest situation since we already have an appointment, from their appointment. We keep saying we feel unsafe, this is a fire hazard. Which they completely ignore. This is unacceptable and extremely poor service.

I am experiencing problems with keeping my pilot lit too. I checked the screen and this is not the issue. I have just returned from Lowes where I purchased the water heater and they informed me Whirlpool supplied kits for this issue and it was widespread. They mentioned a class action and went on to tell me they and all surrounding Lowes stores are out of the free kit and arent expecting anymore. Am I to feel lucky my water heater water didnt fail sooner only to feel unlucky all of the free repair kits are now gone? Lowes provided me with the Whirlpool phone number for help and they have just informed me it will cost me $35.44 plus shipping. I now see how widespread this problem is. This isnt right. I am very disappointed in the handling of this known problem! What is my next course of action?

I bought a Whirlpool French door, freezer drawer on bottom at Lowes 2 years ago for $2,600. The refrigerator needed a new motherboard within the first year and now that it is in the 2nd year, service is required again. The repairman ordered the part and came the 2nd time to replace the part upon receipt. Now it needs the 3rd part since it is still not working. I have a herniated disc in my neck and had to remove everything from the refrigerator and freezer to take downstairs to salvage our food. Now I have to go through the same thing again for the 3rd time after the additional part comes. This refrigerator is junk. I asked Lowes for a new replacement but of course was denied. Does anyone know a good lawyer for this type of situation? I never had a problem with an appliance like this.

I bought the Whirlpool WTW 5000DW1 washer and dryer to go with it. Within the first 2 weeks the plastic handle broke on the dryer. Ive been using the corner of the plastic handle ever since to open the dryer. The washer is the worst washer I have ever purchased in my life. The tub doesnt fill up over the clothes half the time. It is perfectly balanced on the floor but it always bounces around and you cannot open it to rearrange the clothes because they lock the lid. The only option is to try to hold it and wait for it to finish or start over by pressing the button for at least 3 seconds. I have had a few items get shredded by it and a lot of times the clothes dont get cleaned and rinsed properly. Even on 2 rinse option. Just the fact that it has a 2 rinse option is a big red flag. It is supposed to be a energy saver and water saver but that isnt true. If you have to wash and rinse the clothes twice because it has spots from the detergent still on the sheets, something just isnt right. Whirlpool shouldnt even put a product like this on the market. I have owned many Whirlpool products before this but this is the last Whirlpool product I will ever buy. Obviously Whirlpool doesnt test its products or care about quality.

Whirlpool GX5FHDXVB03 french door refrigerator: Continual water leaks. Condensation freezes in bottom of freezer compartment then leaks out on to floor. Per repairman, this is a common problem with this model which theyll come out and fix (remove ice and run hot water done drain line for a cost nearly $150) but it will happen again and again, etc. I cant tell you how many times weve had to perform this task. This is an engineering design defect that Whirlpool should fix.

Its a very good one, it kept my stuff cold, and fresh when my other fridge went on the Fritz, but only one problem, and that is, it has glass shelves and if you have kids, it’s hard to keep clean!

I purchased new dishwasher, range, microwave, refrigerator, washer and dryer 16 months ago. I have had problems with everything except the dryer! Lowes even traded my washer in for another because it could not be fixed.

Bought a Duet Whirlpool washer a couple of years ago. After about 6 months, it started to make a lot of noise like a jet taking off. Where we live there isnt a repairman thats able to come and fix it. So we would be required to have it shipped away to have this done. The washer was purchased at The Brick when we bought our new home. When we told The Brick of our problem we were directed to call Whirlpool directly - this we did and like everyone else we were given the runaround with no compensation to come. I will never buy another Whirlpool product again.