In 2008, we purchased a Whirlpool Gas Water Heater from Lowes. Three years later the tank started leaking (this water heater had a 6-year warranty). Per Whirlpools instructions we were to return this one to Lowes for a refund (in hindsight we should have taken the money & went elsewhere to purchase a better brand!). As our plumber was removing the leaking heater we went to Lowes to purchase a new Whirlpool Water Heater upgrading to one with a 12-year warranty hoping that this one would last, it was advertised as the BEST one Lowes sells! After our plumber swapped out the heaters we returned the leaking water heater for our refund (remember this one had a 6-year warranty & only lasted 3 years).This past June (2015) our water heater stopped working, turns out the thermocouple went out which shuts the gas valve off. Called 5 plumbing companies in the Metro Phoenix area, not a single one would work on it! We researched the repair, called Whirlpool & was told that this water heater was out of warranty. Wait a minute! This one has a 12-year warranty & it is only 4 years old! Whirlpool told me that it is a replacement water heater so the warranty for this water heater is only 6 years (from the 2008 date of the purchase of the first water heater). It didnt matter that the replacement water heater was a different model & was more expensive than what was refunded to us. We replaced the thermocouple ourselves & got it going again. Last week it started leaking, called Whirlpool again got the runaround again, called a plumber who replaced it with a new Ruud for $1000.00 (Water heater + Labor).We went back to Lowes to try to get their help resolving this, the store manager said this was a Whirlpool warranty issue. We ended up taking the junk Whirlpool water heater to a recycling facility and getting $2.50 for it. Bottom LINE!! READ THE REVIEWS, THEY ARE TRUE!!! There was a class action lawsuit with a settlement of which I never received a notice for, I read about it online this summer, but it was too late to opt in. Dont waste your money on Whirlpool water heaters, no one will repair them, Lowes wont stand behind the products on their shelves, they get your money & hide behind the manufacturer & Whirlpool has very nice script to get you off of phone! Whirlpool used to be a trusted brand (do your research, I think they are the manufacturer for certain store brands! ). Our new Ruud water heater has a faster recovery than either of the Whirlpools that weve had; the drain valve is brass, not plastic like the whirlpool, it is overall a much higher quality.

Whirlpool Cabrio Elite - I wanted this washer and dryer set to be the best one I ever owned. =( It’s the most I ever spent on a set. I am truly very disappointed. The washer, it is twisting the clothes and sheets so bad. My clothes are falling apart a little bit each time I wash them. I tried so hard to load the washer the way they asked never putting in a full load. The dryer leaves things still wet around the corners and edges. Because everything gets so twisted I had to buy a iron and ironing board just to get the wrinkled out. I hate to iron.

Bought this brand new 5 door fridge, not even 2 years ago and had nothing but problems. Computer went 2 times. Rail broke for the drawer in freezer. Freezing up in freezer. Switch on freezer drawer went out. I will never buy anything else from Whirlpool again. So much for the nice looking things.

The washer began to start making noises as if coins were in it or plastic breaking every time I wash. Also, it does not wring clothes out good and clean well. I have Whirlpool Cabrio.

We have had the washing machine about four months. When washing sheets, they twist up badly. The machine does not seem to get the clothes very clean. It seems that it does better when we put it on the bulky setting for all washing that we do. More water is needed I guess.

Our washing machine - as part of a stackable set - is two weeks beyond the one year warranty. Washer breaks down, I order the replacement part to find out - after waiting two months for the part - that the washer is now being discontinued so the ETA on the part is NEVER. Ask what Whirlpool will do about this and am advised that they will offer me a discount on a washing machine that does not fit on the stackable dryer. Or I can purchase a new washing machine at more than the original cost of the stackable set.This is a totally unacceptable situation. The washer is just out of the one year warranty period and it is already being discontinued??? Is Whirlpool making disposable appliances now so that after the one year warranty we just toss the appliance in landfill? Really? Unable even to purchase replacement parts to repair a one year old appliance? I will think long and hard about ever purchasing another Whirlpool appliance again.

I paid big bucks for a five burner, convection stove. I had a pot of boiling water on and the steam melted the plastic cover over the controls. Whirlpool said I had to buy the whole electronic panel. Close to $175.00!

Bought a Whirlpool Cabrio Washer, which I see has MANY complaints. I had a problem with the F1 issue during the first year. Same issue and I was also told Whirlpool knows it was bad design yet they refuse to help the consumer in anyway. Maybe 50% a new WP washer. Upon my call they will fix it for 389.00 and give a 1 year warranty again. Im no longer confident in WP products.

Oh what a tangled mess you weave! Inappropriate water usage and bad agitator. The brain is not flexible. Most of all it locks me into a contract of this is it, do or die, you have no other options but to start again. It puts my clothes in abused mode! I say no more, taxes will bring me to buy your competitor. It is very large and way too heavy to move anywhere. No!!! I will never buy another. To the point with all required letters involved, No I will not recommend this (Cabrio washing machine) to anyone, or give it to a friend!

The washer worked well the first year and has gone downhill since. There is mold on the rubber seal where the door closes. This was supposed to be a recall and was never sent the replacement part. We have to constantly use bleach to clean the rubber.

I purchased the Whirlpool Cabrio washer and dryer in 2007. They have been the biggest pieces of junk. One year after my purchase, the water pump broke and had to be replaced for $100 and that is with my husband doing it. Then the dryer broke twice. Now, the washer is not spinning. He took it apart and I purchased $80 in parts. It still doesnt spin. He thinks the motor went and it gives a p50 code. This washer does make holes in your clothes. So many of my summer tops were ruined because of this washer. A friend has the same washer and she started getting the holes in the clothes, so that is how we figured it out. Today, I went and picked up a washer at my rental home, a GE that is 10 years old. My clothes never felt cleaner and it runs like a charm. That Cabrio always smelled like mildew because it seemed like all the water didnt drain out of it and it would sit in the bottom. What a shame. Its only 6 years old and I paid $800 for it and for parts. My husband cant wait to put it on the curb on garbage day. My friend warrantied hers and when the guy couldnt fix the problem, they gave her partial money back. At least she got something. These should be recalled and we should get partial money back depending on how old it is. I will tell everyone not buy these. They are the biggest pieces of junk!

My washer is at least 15 years old. When we bought it we had two school aged children at home. My husband and I now have an empty-nest and we have not had any service calls or break downs since we purchased this machine. It still cleans our laundry very well and we are getting our moneys worth from this washer.

I purchased this model 2 years ago. I absolutely hate the fact that there is not enough water dispensed to clean my clothes. Part of my clothes dont even get wet, therefore, I have to press pause and add 2 to 3 gallons of water during the wash and rinse cycles. I do like the spin cycle as long as it does not get unbalanced.Wished I had never purchased it.

The washing machine is making inviolable noise. I had purchase a semi-auto Whirlpool washing machine from Lotus Koh-e-fiza, Bhopal two months ago. Initially, the company sent a man for demonstration, and at that time, the machine was making a sound and the mechanic removed his back plate and his components and saw that the plate of heating rod is unscrewed. He temporarily tightened that plate with normal screw, and after two months, the same sound is coming again.At present, we are not using the product for the past 5 days and launched a complaint to customer care. The call attender said that the problem will be solved in 20 hours but no one came within 4 days. Today, 21 September 2011, I called to customer care. He was telling me that the complaint has been attended by our attender and at present, no complaint is pending. The washing machine is in warranty period and I am not satisfied with the service of Whirlpool. At present, I am using the product of Godrej and LG, and the service of both company is very good then Whirlpool.

I purchased a 40-gal Whirlpool water heater model 40t91-403 last week and paid a plumber to have it installed. The old one (GE 40 gal) worked fine except for a leak. The new one used all of the old connections except the 2-inch in and out pipes. Same connections, hot, cold and gas. At first I got about a quart of hot water and then all cold. Whirlpool changed the valve and cold water pipe (inside the tank) and still the same. They are trying to tell me that the tank is fine - I have a plumbing problem. Two plumbers have told me different, but still they insist. Yes, I am upset. The old GE, even with a leak, performed better!

I purchased a 50-Gallon Electric Water heater in 2006, sure it lasted and worked well for quite a few years; however, in August 2014 my power bill started to rise dramatically, I live in Arizona and $300-$400 power bills are the norm in the summer months; however, a $700.00 bill will immediately be noticed. I contacted the power company and they sent a tech over who performed a lengthy diagnostic and determined that my water heater was running constantly thus accounting for the great increase in power, I contacted Whirlpool and received 2 heating elements (no charge) which my pricey plumber replaced.The problem still remained and I contacted Whirlpool again and again trying to get this issue resolved. I paid less than $400.00 for the heater installed and since Ive been having the issue Ive almost paid another $400.00 in labor costs trying to get a resolution. Ive decided to get another system and my only reason for posting this is to inform all that the Whirlpool heaters seem to be very problematic, like others Ive had plumbers decline my business when I inform them that I have a Whirlpool tank with the Energy Smart module.

I bought 2 Cabrio washing machines for my two homes along with the matching dryers. They worked for about 3 months, then the washers displayed OL Error during any wash cycle. I tried to contact manufacturer and have not been able to get service without charge. After reading the many posts I am not sure if I should dump both or start investing $$$ in service calls.

Help? WP Gold double convection wall ovens WOD93EC0AS rated very high by Consumer Reports installed end of February. Monday April 6, fan in top convection oven came on suddenly while oven not on. When I tried setting a baking temperature in top oven to see what was going on, message read This function is not available. After about 15 minutes the fan went off, and I could use the oven. Worked well Tuesday and Wednesday. Oven not used again this week, but this evening, Friday, same thing happened again. Process has been repeated several times with fewer times between fan turn on. Have turned off power to ovens until I can get a repairman. Has anyone else had this experience or know what the problem is. Have been reading about the problems with WP ovens. Wondering if I need in addition to Home Depot Warranty the one from Whirlpool as well. Had Bosch convection ovens for 12 years then self-cleaned and thermostats went out and cannot be replaced because parts no longer made or available through any supplier. Said I would not buy Bosch ovens again because the parts became unavailable even sooner. What a mistake. Apparently self-cleaning element blows a lot of ovens thermostats and/or circuit boards. Loved the ovens and had only one repair after the ovens were one or two years old. The Bosch dishwasher is same age and still working great and usually cant even tell it is on.

First, let me say we are so lucky and blessed to get home in time to prevent my home from burning. My Whirlpool range, model 4rf364pxk0, apparently decided to turn itself on (no one home) and grew hotter and hotter. It obviously burned out the thermostat because it was way hotter than cleaning mode. The key pad was melted and sagging inward the control panel warped, heat pouring from it. The racks and interior were glowing orange! My back splash tile blackened and cracked! The oven door locked! Oven hood ruined although it probably saved my cabinets! We hit the breaker! There was so much heat you could feel it on the outside of the exterior wall of the house 30 minutes later! The clean up to my kitchen has been horrible. Black soot and strange greasy film on everything and the stench has been toxic enough to give my husband a raw throat and myself a migraine! Oh and here is the ironic part - my husband was bringing me home from a hospital stay from high blood pressure! It would be almost comic if it wasnt so darn scary! Please, please address this issue before a more tragic story is posted! From looking at this site, it is obvious that there have been other incidence of your stoves turning themselves on and uncontrolled heat. I firmly believe another few minutes and our home would have been engulfed in flames. Now I will spend my weekend shopping for a new ceramic range, hood and tile!

I have a Whirlpool oven and dishwasher and have had nothing but problems with them both since day one! Our oven went out Christmas and couldnt get service on it and we were entertaining for Christmas. DONT EVER BUY A WHIRLPOOL PRODUCT!!! If you do you have no one to blame but yourself.

I do like my Whirlpool refrigerator, but it started to not cool things anymore. I had to get it fixed. The professional I had come out to fix it said that these particular Whirlpool models didnt have a specific part they they needed. It also got built up with ice that needed to be broken down. Overall, I wouldnt buy this model again, but that doesnt mean that all Whirlpool refrigerators are bad. Just this particular model.

ET8AHKXRQ00 - Contacted store where purchased brand new in box, also contacted Whirlpool Corp., was told no repair nor replacement could be offered. Paid $1,500.00, freezer still works but lower box stopped exactly 7yrs after manufacturing date and purchase. A lot of $ to pay for a refrigerator that costs more to repair than large purchase price. I am extremely upset with this situation and brand.

Love the size. We got the 28 cu ft with the drawer. I love the drawer for cold drinks and lunch meat, cheese, etc. Unlike previous refrigerators I never seem to run out of room. The bottom freezer has 2 drawers and is easy to organize.

Since there is only two people in this home, we decided to go for the smaller front-loading machine. This was purchased in 2012, still running. It does a clean wash, however common sense does remind people to not over-load a front load washer. If one follows directions, it gets the job done, and ones machine lasts longer without problems. Thanks.

4 years ago, we purchased a Model UMV1160CW-3 over the range microwave. After 14 months the door cracked around the handle and eventually fell off. We made the HUGE mistake of buying the same model for ease of installation thinking that this would be a typical issue. We purchase another duplicate model in April of 2016 and less than 16 months later the same issue occurred. Spoke to customer service on 12/28/2018 and they told me that they would pick up the cost of the parts but I would be responsible for labor which actually exceeded the cost of the microwave. Exceedingly poor-quality product and support. Will not purchase another Whirlpool appliance.

My 4- to 5-year-old Whirlpool Cabrio 6300 began to display errors recently. F1 was the 1st error code I encountered. After giving the washer a hard shove and rocking, it began to work properly again... for a while. I noticed on some large loads that I was getting an LD Long Drain error. I could hear the pump running but with little water flow. Eventually, it would time out and give the LD error. A service tech was called and determined that the water pump was defective, although the impellers inside appeared okay and had no foreign objects to impede its spinning. After spending $225 for the service call, the LD error resurfaced about an hour after the tech left. Tonight I got the F1 error again, and once again the washer responded to a sharp rap. The replacement control board, which the F1 error code involves, is $220 plus labor. $440+ for a repair to a $600-$700 washer? Im going to dissect the main control board tomorrow and look for loose or corroded connections. I cant understand why the LD code occurs when I can hear the drain pump running... just very little comes out. Other times it empties like Niagara falls... I cant understand why it works sometimes and fails others. The pump is either on or off. It doesnt have multiple speeds as far as I know. Im not sure what to do next... probably try to re-sell the new pump that was installed to recoup some of the money I paid for a non-working Cabrio. This seems to be a very common occurrence.. Have any class action suits been mentioned? If so, please feel free to contact me.

We purchased our new Whirlpool Cabrio washer on November 1, 2013. From the start this machines performance has been a disappointment. We bought the machine at The Brick (I should have known better) where we had made several purchases over the years ( I guess Im a slow learner). Right off the hop, my wife and I noticed that the clothes were not coming out clean. Even though the machine is Eco and therefore advertises that it uses less water, there should be enough water that the clothes at least get evenly wet. That may be a problem with the agitator not seeming to have the guts required to pull the clothing down to the bottom of the drum. We went back to The Brick and told them that we were not happy with the machine they had sold us and quite predictably they told us that we should call Whirlpool (This was less than a week after we had it delivered. Did I mention that I may be a slow learner?). We called Whirlpool and they told us they would have a tech out to take a look at it on November 11th. Wow, I thought. Hows that for service. A repair guy coming out on a statutory holiday. Of course it didnt happen. When we called them back to ask if their repair guy had made it home okay, they claimed that we werent there when the repairman tried to call to confirm his arrival time at our home. We hadnt left the nest the entire day. They then told us to go back to The Brick. We went back once again and told them, yet again, that we were not satisfied. This time they agreed to send their own man over to take a look. He came over yesterday and watched the machine go through an entire wash cycle and then said that there really wasnt anything he could do, as even though it may do a crappy job of washing the clothes, it at least appeared that mechanically speaking there didnt seem to be anything wrong with it. We called Whirlpool back today and they said that there isnt anything wrong with it mechanically so from their end, at least, the story is over. What kind of customer service is that????? Maybe Whirlpool and The Brick deserve each other, but I think we should get better treatment than that

After happily using Maytag washers at my old address for 30 some years, I moved to my current address and in 2006 I purchased a new Maytag. In 2010 I needed service. I was advised it had a bad bearing and was not advised to repair as it would cost well over $600.00. I purchased a Whirlpool Cabrio top loading HE appliance.The Cabrio worked well until one day it made a horrible noise. Although it still worked, I called for service and was told it had a bad bearing and would cost $670.00 to fix and they advised against it. After the service call, it never worked again. I know things dont last like they used to but 4 years is ridiculous. I have been advised that Whirlpool bought Maytag. Is this what to expect from so called reputable companies?

Our Whirlpool Cabrio washer is 2 years old and also sounds as if its a jet on the runway preparing for takeoff. The spin cycle started this about a month ago. It is so loud now. It is just SCARY. I am so angry! No recall??? seriously???!!! Rip-off. I will NEVER buy anything Whirlpool again!!!

I bought this washer (Whirlpool Cabrio) about 4 years ago. A year or so later, it started leaking; based on reading the troubleshooting guide we found that this was because the feet would continually get out of balance. After painstakingly re-leveling the washer every 6 months or so the washer now consistently leaks - even though its balanced/level! $508 to repair a machine I paid $787 for. No thanks. I agree too with the other reports that it doesnt get clothes clean. I just figured this was a feature those of us got for trying to be energy efficient.

I purchased a Whirlpool dryer Cabrio (model # WED7300XWO and serial # M03028918), which has had several issues. We had to replace the felt around the dryer tube twice, replaced the dryer tub itself twice, we had the air flow stop, and now the heat has stopped. Thank goodness I purchased an extended warranty, otherwise who knows what these repairs would have cost. I think I got a lemon. I have had multiple repairs, and days of not being able to use our dryer.

Cabrio washer - What a piece of junk! My washer is 2 years old, it now does its own thing - stopping when it wants, doesnt finish cycle, beeps finished and the clothes are so wet and the washer is not emptied. Then, I put it on drain and spin. One time, it kept going for almost an hour of off and on. My clothes were so out of shape and that was on low spin. I finally took them out and put them outside. The clothes from day one have always come out so wrinkled and that too is on low spin. Im afraid to use high spin. I know you have to for towels, but it still does not drain. It shuts off and on when it feels like it. My first contact with Whirlpool was, Well, did you buy the extended warranty? I hate it when asked that when purchasing any product. Its like saying, This is a piece of crap. Im warning you now so buy the extended. So right there, I felt Whirlpool isnt willing to help. What else can we all do here? Please advise.

Approximately 2 years after purchasing a Whirlpool Gold side-by-side/counter depth refrigerator, I noticed cracks on the interior walls. This was in 2011. First, I contacted the service contract people. They told me this was not covered under the policy. Next, I wrote & called the company. They told me they could send someone out to EPOXY the walls. I told them this was not at all acceptable to me and that I believe this is a defective product. I have never heard of this happening to a refrigerator. I am also quite concerned that there are toxins emitted through these cracks. After a time with no response, I wrote them again.This time, they referred me to Ms. Alicia ** at the Exec. Offices. She wrote asking me to call her. After making several calls & leaving messages to no avail, I wrote her asking that she kindly write back to inform me what the company was going to do about this defective product. I cant help thinking they did not want to commit to anything in a letter because I never heard from her or anyone else at Whirlpool. Small Claims Court cannot help as the company does not have an office in New York. I am very worried about the possible health hazard this possesses. I am very careful to completely cover all food inside the refrigerator. At this point, the cracks have increased in size and new ones have appeared. I am very upset over the lack of concern and lack of response from Whirlpool.Ive owned many Whirlpool appliances through the years and trusted the brand. This is not a cheap appliance. Consumers dont expect to spend a few thousand dollars on a product just to dump it in a year or two. Given the size of the Whirlpool Corp., anyone would think they would simply replace their defective product to keep their reputation if not for the health concern of their customers, which should be a priority. Over the past few years, I have had increased respiratory problems and so have other family members. I believe its due to the emissions from the cracks. I will have to dump this defective refrigerator before it gives me cancer! Thanks Whirlpool, great doing business with you.

Purchased heavy duty dual steam washer and dryer in 2008. Recently got some error codes that we could not fix. Had one service company come in and they could not figure it out. Had a certified Whirlpool company come in and they could not figure it out. They called Whirlpool technicians and they were even unsure of what is wrong. Said they could keep ordering parts and trying them to fix the problem. And of course I would be responsible for the parts. And no guarantee it would be solve the problem. Called Whirlpool direct, to no satisfaction. They said they could send the same company out and have them call the tech line while on site and try to troubleshoot the problem. However, would have to wait another 3 days to get him out. Been a week without washer. I have had washers bought previously last over 10 years without any problems. If these machines are breaking or control boards are going out after about 4 years, then Whirlpool has a bigger problem. Whirlpool supervisor was only offering to maybe a discount on the parts needed, without even knowing if they could fix the problem. Seems to me like they really dont care. Very dissatisfied, will definitely not recommend this product to anyone. And if it ever gets fixed, I am going to sell them immediately.

Whirlpool front load washer was not working. I waited two and a half weeks for parts. The parts came but they cant fix it. I waited for answer for two more weeks. They decided to replace. After waiting two more weeks, no washer. Its going on eighth week, still no washer. Theres no reason we have to wait so long after paying for the extended warranty in this day and age, and paying good money for the washer.

In all of my 50 years of marriage and buying stoves, I have never had an oven breakdown. I live in Canada - I purchased three appliances, all Whirlpool 2 years ago. I had to have a service call on the fridge three weeks ago - a little rubber nipple was clogged up and water was running into my freezer. Bill $100.00 - two weeks ago, the broil element in my stove would not turn off when the bake cycle heated up. Actually, you did not have to press the fast heat button as the broil came on by itself. I have been waiting almost two weeks for the part - today I was told it would be another week. The part has to come from the US - what ever happened to Whirlpool Canada???? - I am told the bill will be $350.00 and maybe more plus the service call. I do not find this acceptable. What do you do when you have already invested the money in the product. Bring back the old Moffat stoves. I would like to be reimbursed for the money I have put out and will put out.

We purchased a new motor home with a whirlpool refrigerator. The refrigerator went out three months after purchasing this new motor home. We have had two expertise come out and check. Both repairmen said there was a leak in the cabinet and needed to be replaced. They called Whirlpool who will not honor the warranty. We are still under warranty but it is not worth the paper it is written on. Do not buy their products because their products do not work and they will not replace broken items from the manufacture. Will have to contact better business. Not material enough to hire attorney. This is what they count on. BEWARE.

On May 15, 2017, I purchased a new Whirlpool Water Heater, unknowingly made by American Water Heater Co., from Lowes (receipt attached). Model Number ES40R10-55 with a 10 year warranty. The water heater was installed using the directions in the owners manual. Upon turning on the current to the water heater after it was filled with water and all air removed from the plumbing, the module gave a code stating the top element was not working. Called the Technician Assistance Hotline and they gave me a RA number to get a new top element from Lowes. Got that on May 16 and had to call the plumber that is contracted by American Water Heater Co. to come to the house and inspect the heater to make sure it was installed correctly.The water heater worked once the new element was installed. On Oct. 3, 2017, had more issues with the module stating the top element was not working. Called the Tech. Assistance Hotline and they gave me another RA number to get another top element. On Oct. 4, got the top element and installed it. The water heater started working again. On Oct. 6, the module stated the bottom element was not working. Called the Tech. Assistant Hotline and had the plumber come out. He determined that he could not find out why it was doing this and also said that both elements were good along with the element that I removed on Oct. 4, which I still had. Since then, the module has been giving codes stating that both elements are bad and I have not had any hot water since Oct. 7. American Water Heater Co., Whirlpool, and Lowes all refuse to give me a refund for this piece of junk! All blame the other for the problems and none will take any responsibility for the water heater not working. I will never buy another appliance with the Whirlpool name and definitely will not buy anything made by American Water Heater Co. I also will never buy another appliance from Lowes as they are not willing to help me in this matter. If you do not want to experience the headache and frustration of owning a new appliance that does not work, I would suggest that you do the same!!!

Whirlpool cabrio washing machine is 3 years old and the bottom leaks heavy bearing oil everywhere. I now see it is a common complaint and the seal was incorrectly installed by the manufacturing plant. They should be forced to offer a recall and they should stand behind their product. I will never buy whirlpool again. I see thousands of complaints online.

Purchased a Whirlpool dishwasher less than 3 years ago. Absolutely horrible! The LEDs stopped working on the control panel within the second year. A few months after that the heating element stopped working. Replacing the element and thermostat did not help. The warranty only last for a year, and now I know why. Whirlpool does not stand behind their products and they were completely unwilling to help, and were quite rude honestly. I will never buy a Whirlpool product again!

Whirlpool Washer Front Loader - Ripped off! It cost $250.00 to repair; the serviceman was at my home all of 15 minutes. The below or otherwise known as the rubber seal was ripped up and caused my washer to leak water all over the floor. I washed a load of laundry, 1 item being my 2-year-old granddaughter’s pants that had a 4 zipper in the pant leg. The serviceman suspected the damage was done by the zipper. So how many of us wash clothes with zippers?!I called and ordered the part from Sears thinking this was possibly something we could fix ourselves, only the part was on back order and would take a month before it was in. Therefore I looked online and could purchase the part, delivered for $91.00. I called for repair service to ask them about it. He said they could be difficult. It would take him about an hour to put it on. Guess what, it was on in 5 minutes. Now, Im even madder because I know I could have done this myself. Whirlpool! Oh yeah, I forgot to mention this was 1 and a half years old; we’re a family of two, no warranty. Think people, we’re getting ripped off.

Started researching online about a week ago because my dryer was making an awful noise. Found out that the new idler pulley system the company used in my Whirlpool cabrio washer & dryer model (WED5500XW0) was so ineffective that they have since started replacing it with the old part #691366 they used to use. Also I am having a problem with my washer not spinning all of the water out of the clothes. Found out that this is a common problem with this model (WTW5500XW0).Had a certified repairman out to replace the dryer idler pulley system. He also calibrated the washer to see if that may help (it did not). The repairman said that some of the Whirlpool washers had been recalled and he had actually replaced some control panels and that seemed to work. He suggested that I contact Whirlpool. So I contacted Whirlpool, thinking that they obviously knew that there have been many problems with these machines (idler pulley part being discontinued & and recall on SOME models), and thought they would be more than willing to rectify this problem. Well think again! The two young ladies that I spoke with sounded like robots, Unfortunately, you are not within your 1 year manufacturers warranty so there would be nothing we could do at this time. Although I must tell you, the second young lady I spoke with did offer to sell me a new washer at a deep discounted price of $386 (which is only $86 more than fixing the washer). I think everyone who has a problem should contact Whirlpool and express this dissatisfaction. And if you are shopping for a washer and dryer, stay away from Whirlpool because their customer service is disheartening.

When I purchased my Whirlpool Cabrio washer and dry, I was told by the sales associate that this was the top of the line. I paid a higher price for what I thought was quality only to find out that this washing machine (WTW6600SW2) Serial number CU2973872 is in fact poor quality, made of components that are cheap, unreliable and made to last only as long as the initial warranty. Prior to buying Whirlpool, I owned Kenmore and had a washer and dry that raised four kids, now I own a Top of the line Cabrio that cant wash the clothes of two adults. I think it is funny that two days after the washer started sounding like a jet plane taking off during the spin cycle, I received your sign up for an extended warranty letter. Then I take the washer apart to locate the trouble and find it is a single bearing on the top of the drive shaft, but can I buy the bearing and replace it? No, I have to buy the entire outer tub and drive shaft. So a $10.00 bearing will now cost me $200.00. I am sure that helps your profit margins considering all you have to do is a search for Cabrio problems to find 350,000 hits, or to ask a professional technician and receive the reply that they are replacing 2-3 of these tub and drive shafts per week. I would recommend that Whirlpool tell its shareholders that you have compromised customer satisfaction to line their pockets with profits. If that was your intent then you have succeeded, however you need to also tell them to sell their shares now as you will have no return customers. Most corporations have core values that deal with safety first and then always followed by quality. I can say with confidence that your quality can be nowhere near the top five with this many problems with your top of the line product.

To start with, the ice maker drips non-stop. I have to check it several times a day to make sure its not puddling up and running my hardwood floor. Because of the continuous that, drip, freeze cycle, it creates an ice dam around the rubber boot between the ice maker and ice bin....which they located in the door where there is inadequate cold, so the cubes melt, making even more of a mess, causing it to be unable to dispense them because it is one big mass... oh and that creates an ice dam also, so on top of replacing a torn boot a couple times a year I have to chisel out the ice bucket and defrost it once a week.Want more? The ice tastes horrible. I have no idea why. It didnt in my last refrigerator. The Tap water tastes fine, I disconnected the line running in to the ice maker and tried the water from there and its fine. So somewhere in the ice maker, something is wrong. There is more. The unit is a year old and now inside the refrigerator it smells like gamey shrimp. I have no shrimp in the freezer, fridge, not have I. I dont store anything in poor sealing containers, nothing has spilled, I removed all drawers, panels, shelves and scrubbed the whole inside with bleach/water. I changed every filter, checked the drip pan (clean), and still half-rotten shrimp smell.My last refrigerator was an Amana from 1986. I bought it used in 93 and owned it until I got this Whirlpool. Never had a problem with it. I have had non-stop problems with this over-priced Whirlpool and I guarantee it is the LAST Whirlpool product I will ever own.

Our Whirlpool Dishwasher model WDT710PAYW is less than 2 years old and is rusting on the outside of the door where the steam vent is. Apparently the hole that was made in the door for the vent was not sealed, now the paint is blistering up due to the rust. Will not purchase another Whirlpool.

We purchased our appliances including a refrigerator, stove, microwave and a dishwasher from Home Depot and chose Whirlpool because we believed in their quality. We purchased an ice maker for the refrigerator and it did not get delivered so we had to contact the store to get this resolved. Once this was resolved we installed the ice maker and began to use the products. We noticed a leak from the dish washer and checked the connections only to find out the leak was coming from inside the door. We contacted whirlpool to let them know. We were then contacted by whirlpool that they could not find a service center in our area and we needed to find one and they would reimburse us 150.00 for the service center that we find to come look at it and then we need to let whirlpool know what parts were needed and they would send them to us then we could have the service center come back and install the parts.After receiving this information I contacted whirlpool to let them know that this was unacceptable. First of all this is time and money out of my pocket and no service center is going to make two separate service calls for 150.00 dollars. So whirlpool tells me they have done all they can do in which I informed them that they have not done all they can do and they we just dumping this on me to take care of. So after arguing my point, the whirlpool employee decided to call a service center and make an appointment for Jan 09, 2020 which I agreed with and hopefully the problem will be solved. This should have been done from the very beginning instead of wasting my time only to have the whirlpool employees do their job. A customer should not have to deal with this. In the future I will using a different company for my products, not because of the product but because of the service. I have made a copy of this and will be posting my review.

I have a Whirlpool washing machine that have problem in dryer and drainage. I have registered my problem on 17 December and my SR number is DL 1211015017, but to date, the problem will not shout out. Its poorest response from your side. My machine is in warranty period.

Our slide in range had a burned out element. After waiting a week for the part the range still did not heat. The real problem was the control panel at a cost of $300 plus labor. We were so discussed with the problem we purchased a different brand range. Who should be purchasing a new range after 18 months???? Cost of service call twice, part cost of element, and new range all total another $600.00. Do not purchase this product!!!

I owned a Maytag washer for 30 wonderful years, so I of course bought a new one. I have battled with my Maytag (Whirlpool) front loading stackable top of the line washing machine for 2 1/2 years. It will not drain, yet sometimes it will. I have played every game with this machine to figure why. I had a repair company out 5 times while it was under warranty and they could never find the problem. It is totally unpredictable. If I could bill Whirlpool for my time and anguish I would own this company!They now say it is the computer board and I will have to pay $350 for a new service contract to fix the machine. I not very politely said that they should pay me for all my emotional abuse. They offered me another option saying they would pay for a service company to come out and look again. However, I would have to pay the labor and material cost. Since I have a stackable unit and it would take 2 technicians I would have to pay $90 for the second person. I was so mad that I called Whirlpool back and they refused to offer me that $350 charge and just said sorry. I are fortunate to have a lake house which needs a new washer. Guess what? It will NOT be a Whirlpool product. I wish I could go to the store where I purchased this holy terror and picket!

Purchased above refrigerator (WRF736SDAM13) over a year ago and it has been nothing but trouble. Ive had service companies out 6 different times. The doors never lined up or closed properly from day one. The final and last attempt to fix was putting caulk in the seal of the doors!! Left door does not seal properly and moisture builds up on inside. I requested several times for a new one and Whirlpool refused. Also purchased microwave, stove and dishwasher. Microwave went out 6 months after using it. They had to replace a major part. At least they did this at no charge. Just the hassle of having to be home 2 times to meet service tech. WILL NEVER purchase Whirlpool appliances again. Ive been using them for in all my homes in the past. STAY AWAY from this model.

Watery body from all the refrigerator side since 9 – 10 months and complained to Whirlpool 2 months back. They changed the thermostat 2 times but no use. Problem same. Please help. I complained during the last warranty days. Please let me know.

The one star is just for the oven, which is still working. I have a microwave and oven combo and the microwave is used occasionally for popcorn or to reheat the food. Soon, it stopped warming up. I called the service, which is one of the worse experiences I ever had, and was fixed.Soon after, the same part got broken. But I ran out of the warranty. I bought the extended warranty and all the problems started. I was told by one of the Whirlpool representatives that before my warranty will become effective, I have to fix my microwave on my own expense. But in the Whirlpool terms and conditions, it stated clearly that they do not cover if the repairs are made by anyone other than a participating service provider or those recommended.I decided to cancel the warranty after paying the first rate but before it become effective. I fixed the microwave on my own expense with a different repair service, since the one that was recommended by Whirlpool charged almost a half of the amount as I paid for the whole unit.Within the month, the some part got broken again. I called Whirlpool to find out if this is a manufacture problem and is listed as recall. However, Whirlpool did not respond.

Bought this washer in May of 2019: Whirlpool - Whirlpool - 4.5 Cu. Ft. 37-Cycle High-Efficiency Front-Loading Washer with Steam and Load & Go™ XL Dispenser - Chrome Shadow. Model: WFW6620HC. SKU: 6313774. Paid over $1,000.00 for it. FIRST TIME washing our sheets, we had snags & rips. I immediately called and was referred to Whirlpool and then referred to an outside repair company. They sent a technician out who said everything was functioning properly despite having ruined 3 sets of sheets (these were not all washed at the same time & I didn’t realize they were being snagged until making the beds).I continued to use the washer - clothes were fine, but yet again, MORE sheets and now comforters RUINED!!!! I called YET AGAIN after troubleshooting the problem myself and finding that the drain holes in the drum had metal pieces sticking up causing the items to snag & rip. Another day taken off work to stay home for the repair. The repair guy comes out, the part was broken. So now I’m left once again with a faulty washing machine AND no ETA on when the new part will arrive and be installed AND having to take yet another day off work.7 sheet sets, 3 comforters, multiple shirts, & multiple bathing suits RUINED & was told there was ‘nothing they could do!’ I will NEVER EVER AGAIN purchase anything with the Whirlpool logo. It’s JUNK! Just an FYI, this was initiated in May of 2019 and it is now the middle of September 2019 with no fix updates. Who can go months without doing laundry???? Once again, poor customer service and JUNK of a product!

We are having our second major issue with our Whirlpool Refrigerator Model WRF757SDEM but unfortunately at 1-1/2 years old, it is out of warranty. Although the certified repairman says that the issue with the thermostat is a known issue and the company created a whole new part to fix the problem, there is no recall. Customer service was lousy. They deny any know issue (again, they created a new part they will sell us to fix the issue) and they mocked us for not buying their warranty after having the first problems with their fridge. This new problem will cost over $300 to fix. Why is there no recall if they knew about the issue?

I have a Whirlpool gas water heater that failed after only three years of operation. My previous water heater in the same spot lasted 18 years. The problem is a defective thermo coupler design that burns out if a filter you cant access isnt cleaned every three months.

Whirlpool slide in range, microwave, dishwasher, KitchenAid fridge: All appliances, stainless finish, were bought with my home in October 2006. Range - Within the first year, I had problems with the outer plastic pieces breaking, the motherboard and the oven and broiler not working. The screws holding the knobs on fell out several times. The oven door was fixed several times this past year until finally it fell off and broke for good and now the oven does not work at all. Microwave - The rotisserie motor stopped working this past year. Dishwasher - Just after the first year, the outer shell of the door came apart. KitchenAid fridge - Within the first year, the temperature adjuster broke. The second year, the ice maker stopped working. This year, the ice maker broke again and the motor quit working twice already and all has been repaired. The freezer handle has fallen off as well.

We purchased the Whirlpool Gold Series smooth top stove from Lowes in December of 2013. The stove is not even 2 years old and it doesnt work. Last September, I noticed a few times that while baking food in the oven, it was burnt after only 10 minutes, due to a runaway temperature. After that, the oven wouldnt heat up properly, it would take too long to bake anything because the temperature wouldnt reach the reading on the display. Then it just stopped baking or broiling all together with the error Feature unavailable. Weve had a serviceman out at least 3 times. Of course, the warrantys run out and its cost us close to $500 to keep fixing it, and two motherboards and a bottom element later, its still not fixed. They wanted to order 2 more parts at our expense, but we cant continue trying to fix this lemon. I will be shopping for another oven, and will never recommend Whirlpool to anyone.

In June 2003, I purchased a Whirlpool Gold Conquest Side-by-Side satina finish refrigerator (Model Number: GAS6SHAXLL03; Serial Number: SP1452552). The ice-maker has always had freezing up issues which I never complained to the company about. It has made weird noises (nothing major) but was already out of warranty. I paid $1,600-1,700 for it. I did not have the money to pay for repairs and I am sure that the repairman would have never found the problem. Two days ago, there was an electrical smell in the house. After an hour or two, it started getting stronger and stronger so my husband looked at the fridge. There was smoke pouring at the back of it so he pulled it away from the wall and we unplugged it. Surprisingly, the plug was not hot. Had I not been home, it could have caught fire, burned the house down and killed my dog! I am furious about this. When I called, Whirlpool says, That model is not under a recall. Would you like me to transfer you to service for repair? Really? Those big corporations dont care! There needs to be a recall on this because I have seen this same problem many times on blogs and forums. Well, guess what, I used to be a Whirlpool fan, not anymore! Now, I went and purchased a new refrigerator, and the brand name is Samsung! I recently bought a Samsung front loading washer and dryer and they are great. It looks like the Whirlpool dishwasher in my kitchen will be next! I bet Samsung makes a nice dishwasher.

On Dec 18, 2015, my hot water heater located in my garage started spewing water out into my garage, driveway, and into the street. I called Lowes, whom I purchased the water heater in Jan 2011, in which it was still under warranty. I was told to call (Whirlpool) 877 817 6750, the order was placed for a gas shut out valve after going through a check system. I was then given the names of two local preferred technicians to repair water heater, whom was not available. The representative from Whirlpool (American water heater) told me I can get the plumber of my choice, authorization number was given. I had to call the (Whirlpool) (American Water Heater) back and was told the part was ordered 2 times. The first part will come on Dec 19, 2015 by UPS, and that the second part will come on Dec 21 by UPS, that a prepackaged label for return will be attached, and to tape the 2 boxes together to send back to the company--one box with the old part, and one box with the new. So, I sent the boxes to an address in Junction City, Tn. But I was not sent prepaid label, so I kept by word and spent $14. I will not be reimbursed according to American Water in which I followed their directions to a tee. So the walk away, the customer is always wrong, staff is not being trained the right way, and as a customer I am out of money and making adjustments to the way of customer service. No service. Just a waste of time, effort, and money.

I have a double door bottom freezer refrigerator manufactured by whirlpool. It is less than 2 years old and is an absolute piece of garbage! In less than a year the noise started, then the freezer became a refrigerator and my frozen stuff melted. I had a local technician come in and he fixed it but he indicated that the fix would not likely correct the problem. Sure enough, about 6 months later the same problem started all over again. Nowadays one is never sure where a product is manufactured. However, if Whirlpool had their products made by chimpanzees in the jungle they would be better than the pieces of trash they are now selling!

I purchased at Lowes and they say was without warranty. I have had all kinds of trouble. The pilot light was replaced in the burner easily because of recall. Now the pilot will not stay lighted unless you tap on the gas valve. Then as soon as the water temperature comes up, the burner and the pilot light go out. I went to Lowes for a new gas valve. They have one for natural gas of $58. They do not stock for propane. I have to purchase from Whirlpool which costs $228. Their comment is that it is more expensive to build another. They do not change offices any longer because of PSi difference bull crap. I purchased a Whirlpool gas stove 2 to 3 years ago and I had to purchase an LP change over kit to use it. This is nothing but a case price extortion. I will never purchase another Whirlpool product again and I would advise no one else either!

This machine needs to go back to the engineering dept. There are too many engineering defects to mention. My Cabrio washer and dryer was delivered October 11th of 2017. It is just my husband and myself so laundry was scarce. I have been unhappy with the washer since the beginning and just recently decided to try and solve the problem. I contacted Whirlpool first and was told these machines have great reviews and nothing is wrong with them. When I started describing the flaws, there was one excuse after another and the person from Whirlpool blew me off. The flaws... all begin with not cleaning which is caused by design. The water level, even with the deep water setting, does not even cover the amount of clothes in a small load; the agitator is so small, there is no effect on agitating the clothes; even with using a SMALL amount of HD detergent, there is always soap residue on the clothes because of the lack of water; and last issue but not final is the load going off balance. The machine will walk all over and error codes according to the repairman need to be cleared so must call if it happened again. Well, the very next load it went off balance again. I did not call because I would have the repairman living with us and I am not willing to set up a bedroom for him or feed him. So, Whirlpool does not care if their product needs redesigning, they only care about selling their product and then the consumer is on their own. Basically the same train of thought from Best Buy where we purchased the machines. Best Buy would be happy to sell me another laundry set... per the store manager but that is all he could do. Will I purchase from Best Buy again... I think you know the answer to that. If they cannot stand behind a product they sell, then they can keep everything they sell, no more money coming from my checkbook to them ever again. Someone, whether the manufacturer or the retailer, should be willing to stand behind their product. But, no one cares. Bottomline, do not believe the ratings on the Cabrio washer. This machine has design flaws that cannot be corrected.

I bought a Cabrio 2 yrs. ago and I wish I had my old washer back. I read reviews and checked out a lot of literature and thought I was getting a quality machine. What a waste of hard earned money. I cant get clothes clean, its loud, and it leaves soap residue even after an extra rinse. Whirlpool products arent what they claim to be. I had a freezer I bought because I bought a half a steer and it quit running and I lost all my beef - $700.00 worth. From now on I will stay away from any Whirlpool products!!

I bought Whirlpool front load washer at Sears in June 27, 2012... (serial W104408696A) (W10409178A-SP). I had 6 episodes within a 1-year time that my clothes got burn holes and the inside of the washer. I would find a handful of gray powder after doing my laundry. The first time it happened, I thought that I left something inside my clothes that resulted to it, but I did nothing to contribute to the event. The second time it happened, I thought Im putting the wrong setting, so I chose another setting to wash my clothes. In that span of 1 year it was on and off happening. I read different reviews on this washer, and I am not the only one whos had this problem. Finally in 2013, before my warranty would expire, I requested for Whirlpool to fix the problem. Right away the tech told me that the problem was the glass covering, so they replaced it. Now my washer would not drain. I believe that this product does not belong in the market. If they knew what the problem was, they should have recalled it. I kept the sample of that gray powder.

Our Whirlpool refrigerator had to have repair in less than a year after purchase. That was a bad experience last summer and I had to complain through every avenue I could find just to get the replacement part shipped to the repair shop. Now I know it was not too smart on my part, but I bought a Whirlpool washer last September. You guessed it, not even a year old and it is not working. All I am hoping for in this posting is to help some other hardworking consumer make a better choice with their money. It is probably not advisable to buy Whirlpool.

We bought a travel trailer and it has a refrigerator with an ice maker in it and weve only used for 6 months out of the last year. The fridge is already broken (doesnt cool). They promised they would fix it even though we were out of warranty (by 7 days). That was 2 weeks ago. Theyve had one person come out and look at it, that couldnt fix it and now theyre claiming that they never told me that they would fix it and they will only cover up to $100 for someone to come fix it but I have to find the person because they couldnt find anybody. I asked them that if this was a fridge in the house how would they go about fixing it and they said it was the same process. How do you expect somebody to go out without a fridge for two-plus weeks?So many people told us not to buy the Camper because it had a Whirlpool in it but we didnt listen and we are regretting that now. The worst part is that after 48 hours we were promised they would replace the fridge if they couldnt get anybody to come out and fix it because they already okayed for the warranty to be used. But now the lady didnt put it in the notes which her name is Terry. We cant get a new one and we are waiting for a supervisor to call us back which probably wont even happen!!!

I purchased a new Cabrio Washing Machine and Dryer in March 2015. I have had 3 new washing machines thanks to the Customer Service provided by Lowes in Lindale Texas. The third washing machine has again lost its brain and the sensor to operate the machine. I have been waiting for the parts since December 2. Called it is still on back order. Unacceptable! It cost almost $60 dollars every 2 weeks for our washing at the Laundromat. Again unacceptable. All Whirlpool can say is We are sorry. When the machine works my clothes are beautifully cleaned using the new HE soap. Takes large loads and I love that part.I am sorry I bought a Whirlpool. Whirlpool would not work with me except to apologize and say the parts are on back order and I will get a call in 5 days for an update. These machines cost $900 each plus tax. They should work more than 3 months at a time. The first repairman could not explain anything. Said they were too new and he could not figure out what to do. The second repairman was more knowledgeable and explained what was wrong. Does not help that Whirlpool does not have an inventory of parts to take care of their customers.

17 month old Whirlpool duet washer door lock broke. ($300) repair! Had given my old (13 years) set to daughter when I moved. That set has never had a repair or problem! Why do they keep making things with more bells and whistles we dont need and so cheaply made? Frustrated, annoyed and becoming cynical in middle age.

Purchased this oven on 9/12 from Sears, did not purchase an extended warranty and didnt think it was necessary. Im a 64 year old widow and only use the oven on holidays, to date Ive used the over 5 times. With Easter coming, I decided to clean the oven. Followed the instructions, the door locked and the oven died. Im totally disappointed, now it would cost over 100.00 to repair, money I cannot afford. Called Sears and all I was told over and over again that they can send a repaid person and I would have to pay. I was also told that I should have purchased a Kenmore and I wouldnt have had a problem and finally I was told that they couldnt fix it and referred me to whirlpool customer service, who also told me it would cost over 100.00. A 19 month oven should not have died. It should have cleaned the oven and continue to work for many more years. Again, Im upset, angry and disappointed with sears & whirlpool. And dont know what to do. Does anyone else have this problem with the oven, is there a recall?

Pros: The refrigerator is large and roomy, easily adjustable glass shelving, and easy temperature controls for the refrigerator temperature and freezer temperature. Cons: the refrigerator is bulky and limits space in a small kitchen. The lower freezer door does not seal very well and requires frequent tweaking and adjusting around the door seal. Also, the freezer handle becomes loose easily and requires tightening fairly often -- which is a pain to get on the floor on your back (and a flashlight plus a special wrench) to tighten the handle.

We bought our stainless and black Whirlpool stove last month. We love that its black topped, and doesnt show dirt. We love how the oven door seals, and the fast heat. What we do NOT love, is how easily the knobs turn. You barely brush against them, and gas leaking into the kitchen. I called for service. Our guy said yes, they turn easier than most of the stoves he has worked on. He called tech support from my kitchen, and I overheard the guy at the other end. His response was dismissive. I have had gas ovens for 20 years. They have without exception, had a spring type feeling to the knob. This stove has none. I am writing this so that if others are experiencing the same thing, they will see it is not their imagination. Something is wrong with the design of the knobs or some part is missing.

Bought this machine June 23, 2016. First use, I called Lowes where I purchased it to say there is something wrong as it makes a grinding noise. I was informed that is normal for agitatorless machines. I asked if he could hear the noise, and he said yes, thats it. So I disconnected thinking, Wow, who makes a machine in todays technology that is so loud you think something or someone is in serious pain?! Now am at the point where I want this design in pain out of my house! Going to Lowes today to try and talk rationally for a complete refund so I can purchase an LG or Samsung which is what I should have done originally.

I have had a Whirlpool hot water tank now for about 7 years and all I have had out of it is trouble. It wasnt even a year old and I was putting a thermocouple in it a few months later I put another one in it. All I do is put thermocouples in it. I have saved the old ones. This heater is a piece of junk and I am the one whos paying the price for it. I just put a thermocouple in it on January 9, 2012 and I am putting another one in it on January 15, 2012. I have replaced all parts and it still does it. They are going to buy me a new one someday. I’m tired of this. This should not be happening. They are ripping people off. If the pilot light does not light, you have to replace the thermocouple in it.

We have a Whirlpool Cabrio mod. WTW5600 XW2, ser. C12830447 he... H2O.. low wash system. Less than two years old. It does not get clothes or towels clean. I put 2 jackets in on bulky items and part of one of the jackets was still dry. They were two small childrens jackets. My husband and I wash as long as possible and on hot wash (which is not hot!). Should not take 70+ minutes to try & get normal clothes clean!Now the softener is draining into the wash with the detergent. Another service call. Learned you can only fill the softened bin half full or less. WHAT??? Our extended warranty is up soon and not sure what to do. We would like to get rid of this pile of junk but cant afford another washer bill. Also wouldnt want anyone else to get stuck with it. Its a shame a company cant put out #1 good product and #2 stand behind it. Bring all of the company production back to the USA or put out a better product and stop worshiping the almighty dollar. Im done with Whirlpool (which was the product to buy), but stuck with this washer for now until we are sure that the brand we buy performs as it should. What happened to the PRIDE in & RESPONSIBILITY of making a good product and standing by what youve made. As my hubby has said, if you have to buy an extended warranty, whats wrong with your product! Again worshiping the almighty dollar or is it you just dont care about the people who buy your product or its quality. Maybe both.P.S. Have contact you before without a response.

First, the storage drawer doesnt close properly aligned. When viewed from the side it looks off kilter. This is because the foot of the range interferes with it closing. Second, what is with the bright blue color of the time/temp on the computer screen? Everything else in the kitchen is green, but now I have bright blue(?).

I purchased my range, model #WEG730H0DW0 in April 2016. I am extremely dissatisfied with the product and the Whirlpool service. I guess its comforting to know that Im not alone. Ive had two problems so far. The first is with the broiler that clicks on and off. It took several visits and a new electrical board for the service person and me to figure out that the door has to be closed to broil. Not sure about all of you but I am used to keeping the door cracked open to be able to keep an eye on the food being broiled. Apparently there is a thermostat at the front of the oven designed to keep the electrical controls from getting overheated or from melting so when the door is cracked open the heat from the broiler hits that thermostat and the broiler is shut off.The people at Whirlpool are awful and rude. I made so many calls and described the problem in so many ways and not one person knew about this newly placed thermostat or thought to ask about keeping the door closed. It took me and my service tech over an hour of troubleshooting on his SECOND visit to figure it out. He looked up the specs and we figured it out. I wonder how many new electrical boards have been replaced when the solution is as simple as keeping the door closed. A stupid design. Also having the same problems with the knobs. They turn so easily that twice I have smelled gas and realized one of the knobs was turned ever so slightly (before the clicking sound to ignite the stove).Then the third time could have been deadly. I had friends come pick me up and we stood in the kitchen for a bit before we left for the entire day. When we returned the whole house smelled of gas. Someone inadvertently must have brushed up against the stove and the knob turned. My dog, thankfully is still alive and so are we. THIS IS NOT ONLY A STUPID DESIGN BUT A POTENTIALLY DEADLY ONE!! I am forwarding this message directly to Whirlpool in the hopes of getting my money back. I am replacing the range immediately and will never purchase a Whirlpool product again!

I purchased a washer from Whirlpool through Home Depot on August 7, 2014 and on Dec 31st, 2014 the washer broke. I called Home Depot and was told to call Whirlpool since I was still under a year warranty. After numerous calls I was referred to Advantage |Appliances, a company that provides repair services for Whirlpool. After a week the technician showed up and briefly inspects the machine to conclude that there were two problems with the machine: The controller is defective and there might be another problem since the water is not draining. An order was placed for the part and another week went by with still no part. I called the corporate office only to hear that it might take 5 to 7 days to receive it. In the meantime I had laundry piling up. I was forced to go to the laundromat with one arm in a cast and a painful lower back. I finally received the part on Friday and the technician arrived on Saturday to install the part and then announces that she was willing to fix the water pump but had to get paid in cash since this was not included in the warranty. Now mind you! This woman knew about the problem from her last visit but made believe that it wasnt a problem. Advantage Appliance makes money by extorting their customers out of money. This young lady stood there without blinking asking me to pay her $89.50 to do the job she was suppose to do in the first place. I purchased an extended warranty from Home Depot only to find out that they would not be able to do anything since I was still under warranty. I have never been so angry and want Whirlpool to take responsibility. I am sitting with a washer half full with water and no one is stepping up to do something! Whirlpool is disgusting! The corporate office was not friendly or nice about this situation. They dont care! Why do businesses like Whirlpool get away with this? This is not acceptable.

Bought new. About 3 years old. Been repaired 2 times. Will run about 10 minutes, drain, and stop. Does not clean dishes. Model #du1015 xt xs2 Whirlpool Quiet Partner 1. Never will buy Whirlpool again.

Whirlpool has always been the refrigerator I have had all my married life which is 48 years. Reliable and dependable they are and I never have to worry about them.

We relied on consumer reports as the primary source for a recommendation on this washer. Just under two years old, it started making a noise, which suddenly went away. Then one day the machine would not spin and drain, and we could not decipher the error code into anything useful. I turned the machine over to find that the drive belt was half-on/half off the pulley on the drive motor. This caused the belt to ride against the belt guard and wear right through it. I removed the belt and determined that the cause of the problem was that the large pulley on the drum was loose. For some reason the nut which holds that pulley on was slightly loose, causing the pulley to wobble. Not sure why they didnt use some Loctite on that nut. I put everything back together and tightened the nut. No problems and I checked it a month later, everything was still good. Fast forward to last week, when the machine was not yet 3 years old. Same thing, washer would not spin and drain. Tipped machine over to find that the belt had fallen off, the drum pulley was again loose. But this time the belt had damaged the pulley on the motor. I figured, no problem, just order a new pulley. Well you can buy just the pulley on the drum, but the pulley on the motor is part of the motor, it cannot be ordered by itself. The cheapest I could find the motor online was $250. We decided to cut our losses and buy a new machine. We will NEVER buy another Whirlpool appliance (or anyone elses by the same manufacturer, i.e. Maytag). Our last Kenmore washer lasted 23 years. Oh but it had an agitator and wasnt listed as HE (High Efficiency), so I suppose the environmentalists would get the dry heaves thinking about the impact of that washer on the environment. But it was useful for 23 years. Now this High Efficiency Whirlpool is headed for the recycling pile. Sorry, I think this hurts the environment more than an appliance which just works year after year. Yep, they took a design that worked and now we have energy/water efficient washers that dont last very long and are so expensive to repair that the solution is to just buy a new one.

Ive had this microwave for about a year and a half. Like some others I get the door sign frequently. I open the door and cant turn it on until the light goes on, which can take a minute to two. I have NEVER had problems with any microwave other than this one. I had a problem with the Whirlpool refrigerator too, which was fortunately still under warranty. I bought the fridge, oven and microwave as a deal. Trust me, there is no deal here. I will never buy this brand again. Lesson learned. Given other reviews, I might just buy another brand of microwave. Worth not having the hassle.

Weve been in this house for almost 4 years so the dishwasher (Whirlpool WDT790SAYM) is no older than that, maybe even 2.5 since I think I got it home in my CX-5 which is 2.5 years old. Anyway, never really had a problem with it and we run ours maybe once a day or twice in a row every 3 days. Last night I remember running a load and this morning noticed the dishes were dirty but the inside of the tub looked clean. So I plop another pod in and tried to run it again and sat there and watched it. It filled up with water but then nothing. After 20 minutes I opened the door and steam came out so the heater element was working and there was water at the bottom. I tried various things but nothing. Canceling still works.So either I try to get this fixed, or buy a new one. This wasnt a cheap dishwasher either. My wife balked when I 1st bought it considering she thinks a $300 model is better than most of these $500+ models. Right now I cant argue with her since we just replaced an expensive Samsung washing machine that lasted maybe 5 years. Theres another review of this model on these forums and the person tried to get it repaired many times and it appears maybe the same thing is happening to us. I wont go down that road considering repairs like that exceed the cost of a new dishwasher.

Heats up fast. Easy to operate, Love how everything cooks evenly. Its about the best oven and range Ive ever had. If you are looking for a range and oven that is one of the best. If not the best try it. You wont regret it.

Updated on 02/13/2021: Company fails on customer service. My stove’s trim is rubbing off on my Whirlpool stove only 6 months old. No chemicals were ever used to clean the surface. This trim piece surrounds the controls and is not covered under warranty. An expensive cheaply made stove. Multiple attempts to have the piece replaced got nowhere. A letter sent to the head office was deferred back to customer service. Whirlpool has lost credibility and I will no longer buy their products.Original Review: So disappointed to find the paint finish coming off the trim on my 8 month old Whirlpool range. No harsh cleaning chemicals were used. Only mild dish soap and a microfiber towel. The trim, attached to the control panel on the front of the stove, is not actually stainless steel, but painted to look like stainless steel. Whirlpool warranty doesnt cover esthetics and refused to replace the trim, stating replacement would include the entire control panel and it is not covered under warranty. So be prepared to have your new expensive stove look old in a matter of months.

Fridge: no ice cubes. Water dripping from the door. Base of one door damaged. After 4 WHIRLPOOL repair services visits, ice cubes OK. Dishwasher: 40% of the time, kitchen floor damped with dirty smelly sticky water. Were first told: Its the product; next: Its the way you arrange dishes; next: The filter is not completely clean. And we are waiting on the 4th visit from the Whirlpool service. We have owned at least 7 dishwashers so far, this is just unbelievable! Poor poor poor performance, with dishes covered with dirty film once in a while. And you never know when the dishwasher will decide to misbehave...Stove: White ceramic stove one day broke with a sauce pan cooking on top of it... Microwave and stove and oven: they beep and beep and beep, to tell you you are increasing the heat (one beep every time you touch), to remind you infinitely the food is ready, etc. And there is NO way these contacts can be disconnected. Now imagine oven on plus 2 saucepans cooking on the stove for which you have to increase/decrease temp. plus the dishwasher finishing, all at once, every day. How much beeping it makes after a long day at work.

We own a Whirlpool microwave hood combination. The door started cracking where the handle attaches. Ordered a new door and installed in July 2017. 18 months in the door and the handle have both started to crack again. This seems to be a problem with Whirlpool microwaves but they wont stand behind their product. Theyll send someone out to replace it for $$$$ but they wont admit they have a flawed product. One year warranty - no exceptions. Will have to replace the microwave and it wont be Whirlpool!

Whirl Pool Duet Wash WFW9400SW - I had this washer for 5-1/2 years. I use it about 3 times a month. Warranty ran out this last February. Machine stopped working. Called tech and he came and said I need a new console and power board. Two weeks later I get told they dont make it anymore and sorry about your luck. I used this washer under 200 times in 5 and half years. Whirlpool offered nothing and I will never buy a Whirlpool product again.

I have a Whirlpool GoldSeries dishwasher and I wish I had never bought it. I’ll start with the cons because I don’t think any other dishwasher on the market matches this: After 3.5 years either the motherboard or the motor is trash. It will cost so much to fix it that buying a new dishwasher is a better option. I paid more than $800 for the dishwasher + $200 for the install + $75 for the service call to find out it is garbage. I used it about 2-3 times per week, which adds up to about 455 uses total for the time I used it. This shows that the cost of this dishwasher, without operational cost considered, is $2.36 per load (or $307.14 per year if you prefer). No other appliance I have ever owned was as expensive, over its lifetime, as this dishwasher.Whirlpool customer service was difficult to get a hold of and then obstinate and useless. The dishwasher would stink if it was not cleaned regularly. Pros: It is quiet and it cleans the dishes well. Recommendation: Do not waste your money on this. Many other dishwashers are quiet and clean dishes but not many will be this big or expensive. A disappointment over their lifespan.

Do not buy Whirlpool appliances! Save yourself the trouble. I have a Whirlpool free-standing gas range that I bought when I purchased my house in June 2008. Just the other day, the oven stopped working. When I went to turn the oven on, I can hear a clicking sound but the burners in the oven do not ignite. I called Whirlpool and they offered to send someone out to fix the problem. By the time someone comes out and charges me for parts, labor, etc, I will probably have paid half of what I paid for the range when it was new! I also had the same thing happen with a Frigidaire refrigerator last year! The bottom line is that brand name appliances are not built the way they used to be. I am actually looking at buying a Samsung or some other model and try my chances with them!

The washing machine continued to display an F1 error code. I contacted the manufacturer and was told that they will not do anything about the problem due to it being out of warranty. This is the first time I have complained about a product or service and want to try and assist anyone who may be thinking of purchasing a washer from Whirlpool. I do not recommend purchase of these units.

Bought this dishwasher (Model No WDF530PAYB3) in 2013. First the plastic latch for the dishwasher detergent door broke. Then, the paint on the face of the door started to bubble, peel, and now is rusting. Next, the heating element broke. Lastly, it started leaked on my wood floor causing damage. 2013-2014 I bought that Dishwasher, Micro-Hood, Stove, Refrigerator, Washer, and Dryer all Whirlpool. All the kitchen appliances were Whirlpool Gold. They would not fix their product. Offered a discount on a new one as if I will ever buy Whirlpool again.

I bought a Whirlpool gold model #GB2F-1DXW507 / k27711376 when we remodeled our kitchen in October 2012. After a couple months I noticed water on my floor, then in the bottom of the freezer. I called Lowe’s. They sent out a repairman. He said it was a flaw in the design and put the redesigned part in. When they delivered the fridge they changed the door to a left hand open and it was never right. After 2 years the ice maker stopped working. I just started buying ice. Today 5 years and 5 months later they said it will cost me almost $500.00 to fix the electric board and the Ice maker. The fridge stopped working would not get cold. And the certified Whirlpool repairman said it was a very good looking fridge and he would fix it with a 90 day warranty on the genuine Whirlpool parts for almost $500.00. I said I wasnt a idiot. Why would I spend that kind of money for JUNK. After reading some reviews I think Whirlpool knows just what junk they are selling. I called and all they said was, “Thats too bad. We will take it under advisement.” I bought mine 1st then 1 year later my sister and sister-in-law bought theirs. 3 fridges with all the same leaking issues. I hope they dont end up with all the same problems.

I agree with all the other reviews listed here! How in the world is a washer to get clothes clean when there is no agitation? Or enough water to even cover the clothes? This is a complete waste of time, one cycle can take an hour or more, because the extra rinse cycle is necessary. And it takes 20 minutes to just sense the load. What a crock. And yes my clothes smell also. Please any recourse besides buying a new washer? Does Whirlpool stand by the product?

I bought a Whirlpool refrigerator about 1 1/2 years ago. Mechanically it works fine, but many places on the outside are showing small rust, circular rust spots. Looks like the refrigerator has the measles. I dont think ordinary paint will cure the problem since it looks like the rust is coming through from the inside of the door. Any ideas as to what will cure the appearance and keep the rust hidden????

I purchased my Cabrio Whirlpool washer five years ago. In the past two months I have had three service calls for repairs. I had water leaking out from underneath the machine which was the result of a failed drum seal. Now I get a ul message (there was one blouse being washed on delicate) and the washer is making a terrible banging sound. I dont think it is spinning. I have not been happy with this washer. My previous washer was 30 years old.

I am making my last payment on this junk ** washer and I cant wait to leave this one at the curb! Like the other reviewers...this machine leaves white deodorant on dark shirts, sheet sets either constantly off balance or parts of them still dry after wash cycle is finished! I changed detergents several times thinking that was the issue...but the bottom line is the sell of having no agitator and water saving features leave you with dirty clothes and off balance crazy shaking nonsense! DO NOT BUY THIS MACHINE!

After seven long years of one issue after another, about once a year replacing one part after another, draining the unit to replace parts, waking up to cold water, I finally gave up and replaced this Whirlpool water heater, model model # FD1H4040T3ENOV unit. Never to buy a Whirlpool unit again. Thanks for the memories.

Bought this washer two years ago. First experience was when a load of towels became wrapped around the agitator. Called in service tech who told me to load the bin with the cloths pressed against the bin wall away from agitator, as if the cloths/towels would stay away from agitator. Two years later, Im ready to the machine to the street. Forget sheets and bedding. The agitator wraps them so tight that I almost rip the cloths/sheets to unravel. I had to wash a pair of work pants that were soiled with mud three times and there was still a stain. I will NEVER EVER buy another Whirlpool product.

My wife and I purchased a new Whirlpool gas range (Model#WEG745H0FS0) almost 2 years ago. Woke up one night to the smell of heat and the oven had come on! Thank God we were home. Very dangerous! Repair is going to be expensive! Havent used the oven portion in about 3 months now. And Thanksgiving is just around the corner! Any assistance is greatly appreciated.

Whirlpool Duet washer and dryers extremely silent and energy efficient. However the wash time can be reduced, it typically takes 40 mins for a full load to wash. The dryer filter lining is fragile and breaks quickly.