I bought what I thought was a great washing machine. It is a top loading Cabrio from Whirlpool. The machine leaves white residue on all my dark clothing. It is a disaster. I am following washing instructions exactly, using HE detergent, loading the right amount, I even tried using PODS. I tried different temperature water, different cycles of washing and spinning and the same thing happens. I had an old Maytag that broke that cleaned beautifully. This thing is a piece of garbage and I would love to send it back if they would let me. DO NOT BUY IT. I AM BEGGING YOU, YOU WILL BE VERY UPSET.

I have a Whirlpool Duet front loader. Sick of it since I bought it! Not enough water to wash & rinse clothes. After consulting sites on internet, husband decided to try adjusting part. He just took off the 3 screws & lifted top off. On the outside part that has a white plastic housing, he turned the longer screw 2 1/4 times clockwise. EUREKA! We have more water! You may need to start out adjusting 1 turn & work up till you see a water level you like. Just dont let the water come over the wide rubber water guard.

My story begins in August of this year when my wife and I built a new home. The builder provided Whirlpool appliances in the kitchen. The fridge has continually tripped the breaker and after numerous visits from the builders electrician, we finally also had the Whirlpool service technician check out the fridge too. After the control board was replaced, and the interior light housing was replaced, it turns out the wiring harness in the fridge is faulty and is not repairable. According to your customer service team, the fridge will need to be exchanged. I have made numerous calls to the suggested numbers (866-698-2538 & 800-253-1301) to find out the status of the exchange. Each time, I have been told that my file is with the review team, and that if I have not heard from them in the next three or four days, that I should call back again. I have not been able to contact the review team directly myself, as your customer service team is either unable to or is not allowed to share those contact details. So I am relegated to wait and then call back again. I have lost track of the number of calls I have made, and the hours spent on hold because of the high volume of calls or re-telling the whole story. The fridge was determined to not be repairable on November 19th. I am not sure if this is the treatment you intend for your customers, or if this is an anomaly.

It works extremely well. My wife and I have had it for several several years and no problems with it and it cleans the dishes very well. We really like the silverware holder. The right size for a family. Recommend it to anyone.

I purchased a Whirlpool cabrio mod. wtw5840bwo washing machine in Oct. of 2014. As of June 2015 I am ready to kick it to the curb. The washer works to it design and hasnt broke down but it doesnt clean our clothes. We load the machine, add the right amount of clothes and recommended detergents and 1hr later after the wash cycle is completed, the clothes still stink with the smell of daily perspiration. I went back to using our old washer that has a worn out agitator. It does a better job.

We bought this washing machine in 2013 from Plass, an appliance store in Chicago that is now out of business. The top loading plastic lid that holds the glass piece snapped and broke. I called the company, and they said that there is not a recall but that I could order parts. They put me on hold, and 10 minutes later, I was on the phone with a company in Missouri that wanted to sell me a lid for $219.38 plus tax and shipping. I am surprised to see that others are having the same problem and that there are no recalls from Whirlpool!

Purchased this beautiful sleek Cabrio washer in May 2012 from Appliance Smart, with its modern looking glass top, it looked so nice. The washer itself works ok for now, but it does unbalance a lot, thats not main issue. We deal with that. The poor design of holding that sleek glass top in is the problem. After a little over two years, it started cracking at the hinge that is just mounted in Plastic which holds the whole lid down, including the heavy glass. The glass started raising up, causing steam to escape. The lid is rubbing and very difficult to open. Appliance Smart is gone now.. We called the service repair person about 6 months ago, he looked at it, said its a problem that is not covered on our warranty and it would be approx $350.00 to repair!! So today, tomorrow or next week it will stop working because the lid is popping off! Its a terrible design, dont be fooled by its sleek look. The manufacturer takes no responsibility for this major design flaw. Beware, the very thing you need to be fixed wont be covered under warranty, lemon law, or just good customer service. We have owned several Whirlpool appliances and doubt that we will own one again, due to the way this issue was handled by Whirlpool.

We bought a Whirlpool side by side refrigerator new. When the first one was delivered it had electronic problems. We sent that one back. The next one, same model, seemed to be alright for a few days then it developed electronic problems. My son discovered the problem was caused by a faulty door panel in the freezer. The panel would come loose and if you knocked it back in place the electronics would work until the panel came loose again. Whirlpool would do nothing about our complaint. Now the refrigerator section freezes things. We paid to have it fixed 2 months ago and now have the problem again. The repairman said he had brought up concerns in meetings about the same door problems and been blown off. Our food is freezing in the refrigerator again and Whirlpool has blown us off again. We will never buy Whirlpool again. I trusted Consumers Report when I bought the Whirlpool and that goes to show you that doesnt always work either.

Same old story! Whirlpool Cabrio is a lemon! I did pay a service guy to find out what the problem was - $70. I ordered a control board for $210, I still had the problems. I ordered bearings for $80. Yay, my Cabrio works! Well, this was all 4 months ago and here we go again. My washing machine is doing everything it was before I replaced the brand new parts. Im so mad! I spent $360. I couldve had a new washer, not a $1000 Cabrio, but who cares at this point! Anything seems better than this pile!

My refrigerator is a side by side and its freezer compartment is small (width). Whirlpool is always my brand of choice for household appliances. I personally would not choose the side by side design again but I would choose Whirlpool.

I bought it a year ago and the warranty is not even up and only in about a month the freezer door handle keeps falling off then the stainless steel which probably is fake is rusting too. They replace the handle and the door and the handle still keeps falling off and the doors are rusting again. My GE stainless steel dishwasher and stove are five years old and there is no rust on them. Whirlpool says it is cosmetic and that its not covered under the year warranty. I will never buy Whirlpool again. Awful customer service!

I bought a Whirlpool refrigerator because it was the lowest priced model that offered a bottom freezer compartment and fit into our available space in the kitchen. We also want a white coloured appliance. One thing we never noticed until set up at home was that there were no ice making trays nor an ice bin. We have had the fridge for five years with no problems. It is quite noisy when running.

In June 2010 my wife and I bought a new Whirlpool water heater (model ee2h50rd045v). As I have fairly extensive experience in both the electrical and plumbing areas (was head lab technician for an aquatics lab for 7 years and worked with maintenance on a farm for 10 years), I installed the unit myself. Two months later the motherboard fried. Whirlpool sent me a replacement and all was fine. Six months after this the motherboard fried and set the unit on fire. Luckily I was home and caught it before it got out of hand and the circuit breaker had tripped when this happened (the circuit breaker saved the house).After I had ripped the smoldering unit out of the garage I immediately called Whirlpools Customer Hotline and told them what happened. They said they would send me replacement parts. I reminded them that the motherboard had fried once before and that this time the unit had almost cost me the house. I also informed them that I have now worked for Lowes for 4 years and I am responsible for selling their product (in addition to other brands). The lady stated all they could do was send me new parts and the problem probably was with my circuit breaker. I informed her the circuit breaker was tripped so the problem was not there. She reiterated that all they could do was send new parts.The next day I started to remove the control panel and motherboard to find that the plastic had fused itself to the frame and insulation. I called the customer hotline and spoke to someone new and informed them about the new problem with the melted plastic. I was told that the melted plastic could be scrapped off safely and that since the problem was not the circuit breaker, the problem must have been how the wires had been spliced from my conduit into the water heater. The gentleman then proceeded to tell me how to do it in violation of Maryland code and told me he would have replacement parts sent to me. I checked with a certified electrician to make sure my wire splice had been done in accordance with code and he verified I was correct.I then had a Department Manager call Whirlpool. He was given the same runaround and told the parts would be mailed to me. He was also given the story about how the malfunction was due to the wire splice being too tight. He then asked to speak to the representatives supervisor and she told him she would not transfer him over to her supervisor. I have forgotten to mention that 2 months prior to this, a Whirlpool water heater (same model) had been returned to my Lowes store within the 30-day purchase window. The unit had caught fire. Since I had had problems with my unit motherboard at this point, I took that unit apart to see what had caused it. The problem started with the motherboard in that unit also. This is unacceptable. Whirlpool obviously has product quality issues.Sometimes bad units are put out. This happens with every brand. But when the same model has such a high failure rate and is known to catch fire, Whirlpools actions are inexcusable. Currently my refrigerator, oven, dishwasher and obviously the water heater are Whirlpools. I will not replace either of these units with a Whirlpool when they reach the end of their operational periods. Also in the future when customers ask me about Whirlpool appliances, I will be sure to tell them just how great Whirlpool is, how reliable they are, how great their customer service is and then quickly usher them over to Samsung, Frigidaire and Electrolux appliances. The department manager that had called Whirlpool for me has shared similar sentiments about future customer recommendations.

To Whirlpool Headquarters, Our message to those whom wish to listen is that your product is only as good as the service company you employ to handle service and repairs. Our most recent experience with A&E Factory Service has us convinced we will never buy Whirlpool appliances again. After a two week wait for our scheduled appointment we were dealt a most unprofessional diagnosis as to what may be the problem and then told that to service our appliance would result in overtime and that simply wouldnt be happening at this visit. The appointment time was 12 to 4 PM the repairmen was here at 2:30 pm only for five minutes. We have spoken with a Michael ** with your company who advised us to wait for a call from A&E which no call was ever received. We will be sharing our disgust with Home Depot where we purchased our refrigerator and alerting them to avoid further customer dissatisfaction by no longer promoting Whirlpool in our area. We are level headed and fair people just not able to grasp that a company as big as yours cant do better than this.

My 3 year old Whirlpool dishwasher (model GU3200XTXY3), broke down for the third time. Under extended warranty with my insurance company, a repair tech was sent out to diagnose the problem. He quickly found that the heater had been continuously running (not just during drying), which caused the machine to quit working. He also found that all the wiring inside the dishwasher was spliced together, those two things=fire hazard! Because the heater was always running, it was super heating all the water used to clean the dishes. The vent to release the steam is located on the top of the door (right under counter edge). The dishwasher was producing hotter and more steam which slowly ate away at the particle board under the cabinets. No, we dont have the most expensive countertops, but Whirlpool should be held responsible for producing a faulty product with a faulty design. I have contacted Whirlpool and they claim to have mailed a claim form 3 weeks ago. I have not received it. Posted on social media about it, and was told I must only speak with the person who sent me the form. I would love to, but since I havent actually received any contact from anyone (other than a fb post) I dont know who to contact, at what number, or email!

Bottom freezer had frost and water. And ice maker began leaking and ruined the new wood floors that we just had put in. This is the forth whirlpool item I have, either had to have replace or fixed. Emailed and called several times. Customer service is terrible. All products bought within the last five years.

Well, this saga continues. Whirlpool dishwasher was purchased at the HH Gregg on Rockville Road on March 17, 2012. Whirlpool dishwasher broke down on May 17, 2012. I bought the extended warranty but who cares? HH Gregg doesnt because it does not go into effect until a year after purchase. So since its less than year, I called Whirlpool, who sent someone out a week later, who, of course, cannot fix the brand new dishwasher because 2 parts had to be ordered. This was almost 2 weeks ago! I still have not heard from the company, A & E, who works for Whirlpool here in Indy. Whirlpool called me on Monday to tell me theyre sorry and blah, blah, and will try to find part in five more days. Then ship it to me, and, of course, it will probably take another week for the maintenance man to fix it. I mean, I grew up having to wash dishes by hand, so no big problem. But when you spend $600 to $800 for a supposedly nice product to enjoy the leisure time of your life and get extended warranties, you expect it to work for at least 6 months before breaking down. So be warned. Do not buy Whirlpool, and furthermore, beware of buying extended warranties and appliances at HH Gregg.

I just replaced our Whirlpool Accubake Double Wall oven, model RBD305PDS14, because it fried the control panel after being put on self clean. This was the second time this has happened and I have probably only used the self clean feature three times since we purchased the oven. Im not a specialist in defective product design, but having a control panel burn up two out of three times when the self clean is used suggests a significant problem. I refused to pay to have it replaced again and obviously did not replace it with another Whirlpool product or any other brand associated with the company. I see that this problem has a long history dating back quite a few years with Whirlpool doing little or nothing to resolve the issue. (They just deny any knowledge about any defect in the design.) Fool me once, shame on you! Fool me twice shame on me!

We have owned the Whirlpool Quiet Partner II for about 2.5 years. We purchased this from our local Lowes store (on sale). For the first few months, everything was fine. Then, the dishwasher stopped completing a full cycle and left the dishes somewhat dirty. I found online that I could reset the controls by pressing heated dry-normal-heated dry-normal quickly.When the cycle starts, I press cancel and then set the cycle I want and it will do it correctly. I do this every time I wash the dishes since I dont know when it will decide to stop working (wasting water and soap to redo).Now, the dishes are not drying and water collects on the ceiling of the tub. I saw this after a smell was coming from the tub (like mold) and when I looked up at the top of the tub, I saw water droplets hanging there and mold forming around the sprayer and back of tub. I have to wipe the ceiling dry now or just run vinegar through it often. I cant see paying someone to come out since service calls start around $70 just to come to my home. I did look at reviews for the dishwasher before buying but I wished that I had seen this site first. I would not ever recommend this dishwasher to anyone!

The unit I live in is at **. They purchased it in Nov 2011. The washing machine worked for 2 months. Now, it has to be dismantled at my home and take a day off. I would like a replacement. The Dutchgate is still being developed. They purchased at least 60 at this point, there is no reason not to give me a new one instead of having two techs dismantle the machine in my new home for 4 hours and a day off of work. Model WFC7500VWl, serial CD13528709. Please try to assist me.

I have a Whirlpool refrigerator from 2017 that is causing so many issues and finally completely broken after spending $500 on repairs. 4 months ago, refrigerator was making loud noise and freezer wasnt working. Then within a week the whole unit stopped working. Then, freezer got all frosty and the whole unit got shut off. 2 month later, the ice maker stopped working and nothing is working now. I called the Whirlpool and they offered me to purchase extended warranty for $530. I could not believe they wanted me to spend another $530 on this refrigerator after spending all this money on repairs and still useless. I refused to buy any more Whirlpool product that I used to love in the past. I am just so disappointed with the customer service as the supervisor from Whirlpool said that is why they offer extended warranty. $2000 refrigerator to last me 3 years???? Not doing this again.

Whirlpool Duet - Steam cycle and sanitize on wash. Dryer is fast and automatic cycles actually work! Have had the washer 4 years and the dryer over 10. We like the Duet Washer because it had a steam cycle and a sanitize cycle plus it has a light inside that helps us see the laundry in our dark room or at night. Also we have been very happy with the cleaning - does a great job and gets the dirtiest clothes clean. The Fan Fresh feature and Delay Start are very handy especially for busy parents who may forget the laundry is in the washer.

We purchased a 50 gallon water heater that claimed to come with a 6-year warranty on parts. Its been a little over two years that we owned the product, and we noticed rust on the bottom. We checked to make sure if water or even moisture is visible from the outside - nothing. The problem is obviously coming from the inside. Since we have warranty, we called them and got nowhere! We were told that it is just cosmetic. They refused to send out a technician to take a look at it. We even emailed them pictures (see pictures) and still nothing, no service. Their warranty is a joke. We will never by any Whirlpool product ever again. Dont believe the sticker that claims you are covered for a certain amount of time. When it comes down to it, they will not do anything for you.

We purchased the Whirlpool Gold Series smooth top stove from Lowes in December of 2013. The stove is not even 2 years old and it doesnt work. Last September, I noticed a few times that while baking food in the oven, it was burnt after only 10 minutes, due to a runaway temperature. After that, the oven wouldnt heat up properly, it would take too long to bake anything because the temperature wouldnt reach the reading on the display. Then it just stopped baking or broiling all together with the error Feature unavailable. Weve had a serviceman out at least 3 times. Of course, the warrantys run out and its cost us close to $500 to keep fixing it, and two motherboards and a bottom element later, its still not fixed. They wanted to order 2 more parts at our expense, but we cant continue trying to fix this lemon. I will be shopping for another oven, and will never recommend Whirlpool to anyone.

Overall, I am happy with my Cabrio BUT we purchased a Whirlpool WTW7000DW0 Cabrio top loading washer w/ electronic touch panel in May 2016. We experienced water hammer from day one. I finally had enough yesterday and knowing that the plumbing could be suffering (15 year old condo), purchased 2 Sioux Chief MiniRester, Model 660-H arresters (Lowes at $9.99 each) and had a plumber install them today. I could have but am nursing a fractured rib. Long story short, they work perfectly. There is NO indication elsewhere in the unit that water is even entering the tub unless youre standing right beside it.Ive been told that hammer problems exist in ALL high efficiency washers, all are prone to this problem. I was also told by a Whirlpool support person that the Cabrio is a Samsung design and the pulsing of supply water off and on, over and over is normal operation. If I had been informed when purchasing that hammer is a common problem, I would have installed arresters from the get-go. At the very least, manufacturers should include arresters as a part of the sale; installers should make sure that every new installation includes arresters. All told, I am out just under $200.00 for new technology that really could have been engineered out in the beginning.

I bought a 40 gallon Whirlpool water heater product no. 0733336 and it completely broke down after one year and three months. No pilot light even. I called the number on the unit and was informed that only the cost of replacement parts would be covered by warranty. I still have to pay someone 60.00 an hour to come out and fix it. Never again will I buy a Whirlpool product.

The washer does clean simple stains. The clothes end up all twisted (sleeves & pant legs). Antiperspirant gets transferred to dark clothing. Large loads do not get clean and the response from Whirlpool was run everything on hot and for longer than normal times. The enviro rating and low water usage claim has resulted in a machine that does NOT fully clean clothes. Look elsewhere and do not buy.

6 months after we moved into our new house our Whirlpool refrigerator froze up and we had it repaired. 6 months later the same thing. Still under warranty. 6 months later the same thing. I asked for a new refrigerator. They said it could not be replaced unless it was deemed unrepairable!!!! Now after 2 years with the same problem every 6 months I get in contact with corporate and advised to get an extended warranty because “they don’t replace refrigerators”. So an extended warranty will cost $350 this year and increases every year because the fridge is over 1 year old. Ok so I am paying to have it repaired with their so called warranty!!! We went to an appliance store and purchased a new not Whirlpool refrigerator. Will never buy anything Whirlpool again and let all my friends and family know of my experience.

Purchased this refrigerator, Model # WRS965CIAH on October 3, 2014. Paid extra for counter depth. Initially the refrigerator worked fine. After about 9 months we noticed the food in the back of the refrigerator especially on the top shelf started freezing. This started getting worse over the next 2 months. When I called Whirlpool 10/19/2015, 800-253-1301, I was told by their representative that this was normal, that air from the freezer blows into the refrigerator through vents and to just re-arrange my food so that it is not pushed to the back of the refrigerator. I asked him if this was normal why wasnt this happening in the first few months but only developed later? He had no answer. I asked him if it made sense if this was normal then everyone who buys this refrigerator has to make sure their food is not pushed to the back of the unit, then why dont they state that in the directions for use??? Ok everyone make sure every day you push all your food to the front of the unit so it doesnt freeze ridiculous. He just said thats the best thing to do. I asked him if I could talk to a technician, if maybe there was a way to fix it manually and he said there were no technicians there. I asked him if he knew about the lemon law and he said they dont have that there... ok. The refrigerator is just days after the 1 year purchase so he basically said just to call where I purchased it that Whirlpool could do nothing for me. Is this how Whirlpool trains their employees??? Good job Whirlpool, way to go. Luckily I purchased the extended warranty. Will see how the repair goes and report back. Did not call sooner due to health issues. Its not like the refrigerator is years old and started to break down - this is within a year. Whirlpool doesnt care about quality. Will never buy Whirlpool again and will spread the word as often as I can.

My Whirlpool Cabrio has been a real workhorse of a machine. It has been able to take large loads and small loads and get them equally clean and fresh. This was a more expensive model but it was worth the purchase price as I have used the various features provided. I also have appreciated that if you leave clothes on the washer overnight they are still fresh in the morning.

Three failures in 14 months. First, the detergent dispenser broke. Next, right after the warranty would have been over (fortunately, I purchased from Costco which automatically extends warranty for another year) the pump failed and had to be replaced. Now the heat element is obviously faulty because the dishes are cold through all cycles. So I have to call them back again. I have no complaints about the service company. They were polite and reasonably prompt. Just appears that the product is JUNK! I am going to Costco tomo and will explain the situation. They probably can’t do anything but maybe they will go to a better product for others.

The side-by-side with the lower freezer was one of my all-time favorite units Ive ever had. The capacity of the interior was expected to be better, particularly the freezer, but it was effective in getting to the items I needed. Storing was good, but the freezer had trays in the upper portion that I could see when looking down, as Im over 6 tall.

Whirlpool washer Model WGD4815EW1. Bought this washer just about 4 months ago and right away I hated it but was told by people that all the machines had gone to the lid lock and that the government had mandated the energy saving devices on the machines so the machine will only put just a little water in the machine. I have been VERY VERY unhappy with this machine. My husband figured out a way to bypass the lid lock mechanism. Then after washing clothes many times I found out in order to get my clothes clean I had to just set the dial to Bulky every time OR I had to wash the clothes 2 times to get clean if I didnt. Once we bypassed the lid lock and then I figured out where to put the knob so the clothes would come clean I was fine until last week the machine just would NOT wash or do anything... it filled with water and just sat there until my husband got the water out. I located a Speed Queen from an appliance store and I am much happier. It does not have the CRAZY lid lock on it. I realize that some children are apt to mess with the washers. But I dont have children anymore and when I did I had a laundry room with a lock up high on the door so they could not play in the laundry room. I dont understand why this so called mandate could not have been done in a way as to allow those with kids to have the option on the machine with a built in code device to set the machine so the lid will lock and those of us without children in the house to opt out of the code to set the lid lock. NO REASON why we cant have a CHOICE. As far as I see it is a way for the government to try control more where they need to keep out. The cars have been designed with safety locks for children to keep them safe, but it is up to you to choose to use them. Same principle! Now for the mechanism to make it so the machine will only put so much water in the machine to wash. Youre NOT SAVING any ENERGY or WATER if you have to wash the loads twice!! This whole mandated business with the newer washer machines is a huge JOKE on everyone. I will be searching out used machines and having them rebuilt because I dont EVER plan on buying another one of these newer machines. If enough people stop buying them the manufacturing companies can raise some cane with the government to get the mandate lifted. NO I will not buy another Whirlpool washer. I encourage some of you out there who LOVE a challenge to figure a way to change the stupid motherboards on the newer machines and create a great business for yourself because if someone else can create it you can recreate it.

MODELGR673LXOQ WHIRLPOOL RANGE - I purchased this range in January 2014. It is a good-looking range with a ceramic top and a convection oven. It has burned more food in a year than I had burned in several years. The top burners get red hot no matter where you have them set. They turn on very hot, then turn off and after a while they are red hot again. Cooking anything that requires a medium or less heat burns to the pan bottom. The oven works alright as a regular oven but when put on convection it burns the food closest to the fan before the rest is cooked. The company sent a technician to check the stove. He checked the temperature of the oven and said it was running too hot. He changed that setting and the first time I tried to bake it took forever. I reset the oven back to where it had been. The tech made no attempt to check the top burners as he said they couldnt all be bad. I hate this stove I had my former stove for thirty years and never had problems with it.

Appliance repairman is coming tomorrow. Washer is less than 2 years old and will stop mid-cycle more than once (I re-start it)... At first when I thought the cycle was done I would get ready to move the clothes to the dryer and realize they were all soapy and sometimes they were just massively soaked so something is not working right. Sensor?? Hopefully not the computer panel as that will be too expensive to repair.

Ive only had my matching set of Duet Washer and dryer for 14 months when the noise got so bad that we could wash when we were at home. We would start a load and leave. I bought the Repair plus one and Whirlpool and said they would give me $599.00 to replace my machine. I cant buy one for $599.99. They said they replace when I purchased the warranty, but now Im told at 75% of its value because its between 1-5 years old. Now, Ive paid $300.00 for the warranty and will half to spend another $200.00 to replace it. Im frustrated and disgusted with Whirlpool.

I purchased a Whirlpool refrigerator at Lowes after my 16-month-old $4000 Samsung died and Samsung didnt care. I thought I was purchasing a better product. Six months old and the Whirlpool died. Service tech came out, said he had to order parts. That was on 1/21/2020. It is now 3/5/2020 and I still have no refrigerator. After being told week after week after week that I had to wait for parts, 3 weeks ago they finally approved a replacement refrigerator. STILL WAITING FOR THAT. Have completely lost confidence in Whirlpool and would not recommend the brand to anyone. Lousy customer service and lousy product. So disappointed. No reimbursement offer for lost food, weeks of having to purchase take out, gas to store daily... HORRIBLE EXPERIENCE.

This has been our second Whirlpool Hot Water Tank in our home in the past 14 years. The first was installed by the builder, when it went out we purchased a larger capacity one from Lowes. It was professionally installed and now, after the extended warranty coverage period is expired, its expired as well. I would think you should be able to get more than 7 years out of not one, but two Whirlpool hot water tanks. No wonder they are no longer manufacturing hot water tanks - they sucked at it. Also, if you do have one, you have to get parts from Whirlpool and pay $30 shipping. No thanks, for the cost of parts to replace everything youre better off getting a whole new unit.

Whirlpool Water Heater FG1F4040S3NOV - I had this water heater installed in 2005 by a professional plumber and every year since like clockwork, I have to replace the gas control valve/thermostat. Last year, Sears came and did the work and made their arrangements to have the part replaced. This year 2012, March 9 my gas control valve went again. The unit is not even a year old and broke again. Unfortunately, the six-year warranty is up on the hot water tank. I called Whirlpool two times. The first time, the guy told me that the warranty was up and hung up on me! The second time, the guy would not honor the replacing of a part that is not even a year old yet. The money I spent over the six years making repair on it, I could have bought a new one. This company is nothing but a bunch of **. Is there anything that I can do? I have paid to replace this five years in a row.

Do not waste your valuable dollars on this refrigerator. Not even 5 years old and have had nothing but issues with this fridge. The ice maker quit a few months ago, started leaking water from somewhere behind the wall panels and now the freezer door is frozen shut and the refrigerator section is warmer than the outside air. Did I mention that this refrigerator isnt even 5 years old yet? A piece of junk is a piece of junk and this fridge is a piece of junk!!!

I agree with all the other reviews listed here! How in the world is a washer to get clothes clean when there is no agitation? Or enough water to even cover the clothes? This is a complete waste of time, one cycle can take an hour or more, because the extra rinse cycle is necessary. And it takes 20 minutes to just sense the load. What a crock. And yes my clothes smell also. Please any recourse besides buying a new washer? Does Whirlpool stand by the product?

Purchased from Home Depot and self-installed. That part was not too big a deal but after installing this stove we started a journey of irritation, aggravation and general dissatisfaction. This stove has the standard layout for burners that seem to be common to most low-end stoves. Two huge burners in the front, a simmer burner at the right rear and a general purpose burner at the left rear. Thats all wrong for me and our set up. I want a large burner at the left rear and general purpose every place else. Can you alter the standard configuration? NO! Not without some major alterations to the stove top.Next are the grills or cast cooktops (2 each). They are a bit cumbersome when cleaning the stove but doable. The real problem with the grills are Whirlpool decided to save money by skimping on this feature. The grills are not a stable cooking platform for smaller pans and it turns out Whirlpool recommends square pans for this stove. SAY WHAT? I have pans and skillets from my grandparents and they are ALL round. Thats how that stuff is made. ROUND! The grills design is unstable for any round pot, pan or skillet, if its diameter, is 6 or less. Kiss that excellent saucepan goodbye if you have this stove. My current solution is a piece of light expanded steel over the burner areas.Keeping in mind we use Propane as our heating gas. The adjustment of the flame temp on the four burners is non-existent. They all are either on high, medium or low. There seems to be no fine tuning with these burners. At the end of the day go look for something that is NOT a Whirlpool, LP gas range Model #: WFG515S0EW. You will be better served and less irritable with almost anything else. Even a campfire in the yard is a better choice.

I called Whirlpool’s 800 customer service line to let them know I was having a problem with this loud humming and rattling noise coming from my refrigerator because of a manufacturing defect (according to the service tech that came to my house to fix it). Apparently, the metal grid is being held by a flat mental hook which vibrates. What a loud noise. We cannot eat in our kitchen: the noise it terrible. The repairmans solution was to put a piece of rubber between the two metal pieces. It worked until he left. I told him it would start again and it did! I even let the customer service rep hear the noise and she agreed. I am in the early stages of my problem, but from what I have read I am not very hopeful. I would like to have the names and phone numbers of the people at Whirlpool who refused to help. Maybe if we would all band together and call them, they would get tired of hearing from unhappy customers and fix the problems. I am game. Anyone else?

My parents bought a Whirlpool refrigerator that makes a strange noise, an intermittent clicking. Sometimes it goes on for hours. It is neither the ice maker, nor the compressor. I contacted Whirlpool, they said it is normal. It is not normal. I have a twenty-year-old refrigerator far quieter than this brand new, $2600 noisemaker that keeps things cold.

In January 2016 we ordered a Whirlpool Dishwasher through Home Depot. First, Whirlpool delivered the wrong dishwasher and the installer took my old one away - leaving minimal options to correct the problem quickly. Home Depot did not make the order Model # error but they did compensate for the error. Now, with 18 months of very low use (2 in household - prewashing all the dishes) the pump on the dishwasher is gone. Before posting this review I contacted Whirlpool via email. Two weeks later I had a phone message and I returned the call only to wait for 30 minutes to get through to a customer service agent who could offer absolutely no solutions or compensation for their poor quality product or service. There needs to be a zero on the scale of STARS to reflect Whirlpools overall quality.

Recently, I was having a problem with my Whirlpool gas range so I contacted the 1-800 number. Long story short, the repair cost was so high I would be better off getting a new range. But believe me, it will not be a Whirlpool.

Whirlpool refrigerator Model type 14TFA seems to really keep things cold with good airflow in the freezer, and below shelves in bottom half are also keep cold adequately. Standard white appearance... somewhat boring.

In April of 2009, I bought a Whirlpool over the range microwave, model # MH2175XSB-5. In September 2011, a small piece of the door fell off at the hinge. Pieces have continuously fallen off and now the door is splitting, rendering the item useless. It was purchased at Lowes and I had them installed the item. Two years of service plus installation come to big bucks for a piece of trash.

Everything I buy from this company breaks all the time. I purchased these brands hoping they were good but apparently not. Always have to get them serviced. Lately they did an exchange on my fridge. Hope it helps because after thousands of dollars of food in the garbage it better work. And the washer thought, Oh Im paying more. It will be good. At this point will cost me less to buy from another company. Buyers beware. Cause the company cant do nothing good for me so dont buy from them.

I have had our Whirlpool Cabrio washer and dryer (CU0771356 and MU0803512) for four years. Our trouble started when the machines were 14 months old. The numerous error codes have been fixed by replacing boards, the bearing has went out, and the entire tub has been replaced. The dryer has had two service calls for going out. Now, both are out again. The washer pump is bad and the dryer has stopped heating up. Where is the class action lawsuit?

There are plenty of reviews on this board already about how the so called AquaLift technology for oven cleaning is completely worthless so I wont repeat what they have already so eloquently described. AquaLift has managed to take us back in time to around 1947 or whenever it was before the old easy off oven cleaner was invented. I purchased the cleaning kit (affinity) as well but it doesnt do much of anything. The only people who might consider purchasing a stove with AquaLift are those who do no roasting or broiling of meat. The oven looks beautiful, so maybe it could be for those who enjoy a show kitchen and prefer takeout.

We purchased this refrigerator towards the end of 2008. The entire interior of the refrigerator is imploding. The plastic Whirlpool used to frame the glass shelves is cracking and shards are falling off. There are 3 drawers; one has already fallen because the plastic sliders the drawer moves along has disintegrated. We noticed the small hairline cracks appearing some time ago but never thought they would go to this extreme. Apparently the plastic used cannot stand up to cold temperatures.I contacted Whirlpools chat and was told that the product is out of warranty and I need to place a service call to get new parts. I proceeded to email the CEO of Whirlpool, Mr. Fettig because I dont believe I should have to pay for a service call when its a manufacturing problem. I received a call the day after and was told the same thing; that they are sorry we are experiencing a problem but the warranty only covers the first year. I was told that if there was a problem with the plastic being inferior that they should have cracked in the first year. I responded that the cracks may have been occurring early on in the back of the refrigerator which is the coldest part but were noticeable.Its very frustrating because a refrigerator purchase is expensive and not something that I planned on doing a mere 5 years later. I believe that Whirlpool at the very least could have shown goodwill towards their customers and given at least some discount on the replacement parts or at the very least a certificate with an amount off toward the purchase of a new refrigerator. Its a win-win situation for everyone because the customer is still happy with their Whirlpool refrigerator and/or it guarantees repeat business for Whirlpool. Apparently Whirlpool doesnt care about keeping customers happy and want and/or need repeat business. Its the last Whirlpool I will ever purchase!!!

We bought the Whirlpool Gold Stainless Steel dishwasher around 4 years ago and the pump and motor assembly went out. We spent top dollar on this dishwasher and should of lasted a lot longer. I’m no longer going to buy anything Whirlpool makes.

Microwave Hood Combination...moisture sensor failed...potato caught on fire. Service company Whirlpool sent failed to show (Whirlpool selected a repair shop over 100 miles away). 2nd service company told me sensor failed and they would return with new part (ignoring the fact the white microwave was not gray and black) in a few days. If I wanted a new microwave without the dust and ash, I had to call Whirlpool. Whirlpool is ALWAYS experiencing a high volume of calls.Whirlpool states 7 - 14 days (unit on back order of course) for the microwave will arrive. 21 days later..no microwave. More high volume of calls... Whirpool state a repair center has received the microwave on July 31st and should have called me. Said repair center has no record of this transaction. Whirlpool reps claim to have records of my claim...but... they keep asking did we tell you it had been handled? I say read my file... Customer rep says my file is hard to understand (i.e. it is long). But they assure me they are empowered to help me. Maybe they should look up that word.Today...it is not Whirlpool customer service fault! No... It is being handled by a Product Replacement Specialist... Sadly they cannot provide me with any contact info for that Specialist. Empowered but not informed! Lesson: Whirlpool dont buy or if you do... and it catches on fire...just buy a new one... They make it impossible to get a replacement.

First one had major problems. The bladder they call it. They took out the whole system out, replaced the tube that goes to the top of the refrigerator which is where it always starts leaking so they worked on it three times, junked it, gave me a new one and here I am again same thing. Ruined my hardwood floor and Im stuck with it. Never again will I buy WHIRLPOOL.

Whirlpool has always been a quality product in my household. I had Whirlpool microwave prior to the one I recently purchased. It lasted 10 years and was used frequently and always on daily basis. It worked like a dream and I would never purchase any other brand!

We have a 2 1/2 yr. old Whirlpool gas stove. We have had the mechanic here several times as it would not ignite. We also have had the control panel repaired twice as it melted. It is melted again but they will do nothing. I tried to clean the oven with their AquaLift technology and had to re-do it four times and still have residue which appears to be permanent. We are very frustrated with it. We have used Whirlpool appliances for over 40 yrs. but will not buy another. Model#WFG710HOASO, Serial#R21712236.

We relied on consumer reports as the primary source for a recommendation on this washer. Just under two years old, it started making a noise, which suddenly went away. Then one day the machine would not spin and drain, and we could not decipher the error code into anything useful. I turned the machine over to find that the drive belt was half-on/half off the pulley on the drive motor. This caused the belt to ride against the belt guard and wear right through it. I removed the belt and determined that the cause of the problem was that the large pulley on the drum was loose. For some reason the nut which holds that pulley on was slightly loose, causing the pulley to wobble. Not sure why they didnt use some Loctite on that nut. I put everything back together and tightened the nut. No problems and I checked it a month later, everything was still good. Fast forward to last week, when the machine was not yet 3 years old. Same thing, washer would not spin and drain. Tipped machine over to find that the belt had fallen off, the drum pulley was again loose. But this time the belt had damaged the pulley on the motor. I figured, no problem, just order a new pulley. Well you can buy just the pulley on the drum, but the pulley on the motor is part of the motor, it cannot be ordered by itself. The cheapest I could find the motor online was $250. We decided to cut our losses and buy a new machine. We will NEVER buy another Whirlpool appliance (or anyone elses by the same manufacturer, i.e. Maytag). Our last Kenmore washer lasted 23 years. Oh but it had an agitator and wasnt listed as HE (High Efficiency), so I suppose the environmentalists would get the dry heaves thinking about the impact of that washer on the environment. But it was useful for 23 years. Now this High Efficiency Whirlpool is headed for the recycling pile. Sorry, I think this hurts the environment more than an appliance which just works year after year. Yep, they took a design that worked and now we have energy/water efficient washers that dont last very long and are so expensive to repair that the solution is to just buy a new one.

Purchased Whirlpool refrigerator at Lowe’s. Refrigerator would never get cold enough, so I exchanged with a Whirlpool Gold side-by-side refrigerator. After installation coffee was spilled behind refrigerator. I was unable to pull refrigerator out from wall to clean coffee spill from behind. When checking with Lowe’s on the 35th day, I was informed that Lowe’s 30 days warranty had expired and I would have to work directly with Whirlpool.I discovered it was very hard to communicate with Whirlpool; there was a problem that they only had on file the first refrigerator I purchased not the one I kept. The Whirlpool service rep did not seem very cooperative but with insistence they told me they would change my information to the correct model and serial number and a repair order was sent to a local service shop. The problem with not being able to roll the refrigerator out from the wall is that Whirlpool had changed their wheels to a tri-wheel support and there was not enough height on the single front wheel to lift the refrigerator to clear the screw down leveling stops on each corner. The service rep had no solution for the problem and had to call the Whirlpool service. He indicated he never was able to get assistance from that department. I told him I would talk to them as the consumer but they refused to discuss the matter with me, so I gave the phone back to the service tech. Whirlpool told the service tech to order replacement wheels of which I knew this would not resolve the problem.After two weeks, the replacement wheels arrived, the service tech installed them and as I expected they did not resolve the problem. I then requested the service tech to remove the rubber from the stops on the corner to allow for the additional required clearance and this solution worked. This is a very poor design for Whirlpool, but I accepted the results. Two weeks later I receive a phone call from the service business and they tell me that Whirlpool did not have the refrigerator model/serial number they worked on. Whirlpool was not willing to resolve the problem I had with them initially and the service business would have to bill me directly and was not covered under the warranty.At this point I lost it and informed the service business I resolved this model/serial number with Whirlpool before. Whirlpool gave them the authorization to work on the refrigerator and they would need to collect the fees from Whirlpool. I have purchased my last Whirlpool appliance mostly because Whirlpool makes it very difficult or refuses to talk to the consumer and it appears the quality is no longer there. Will Whirlpool become the next Kodak? With this kind of service, people will just quit buying from them.

Extremely quiet machine. I love that the silverware wrack is situated across the front of the door giving plenty of space for lots of silverware. This leaves even more room in the already large washing area for pots, pans, dishes, bowl, glassware & more.

I purchased our brand new double ovens on 9/27/11. I was happy until 11/3/11 when the inside glass exploded, shooting shards of it all over our kitchen during the self-cleaning cycle. I immediately called Kitchen Aides corporate office in Michigan. She said that she could send a technician out to access the damages but didnt see that this was a product issue. Like I dont know how to properly push buttons to self clean! The technician came out the next day and said that he was only authorized to replace the glass, nothing else. He couldnt tell me why it shattered, he thought perhaps there was a bubble in the glass during manufacturing. I said I think it needs a whole new door at the very least, but more likely a new unit. I just paid $3000 for what will be a refurbished oven after one month of use. Today, I called once again to tell them that I am not satisfied with new glass, not to mention my oven is unusable in its current state and still has glass sipping out. I spoke to a woman in their safety committee department, who told me that Whirlpools warranty is replacement of broken parts, nothing more, and since only one pane of glass broke and not the door physically, they couldnt authorize a new door or new oven. Mind you, that we still dont know why it broke, was it just faulty glass or could it be a heating problem? She didnt care, only that they could only repair the glass. I asked if the glass could be overnighted since I have been without an oven for four days now. She said that she had no way of doing that, so I asked if I could speak to the parts department and she said I could not, that only techs could contact them. I asked if she could do anything for me? Could she assure me that it would be fixed within the week? No. Could she assure me that it would be fixed by Thanksgiving? No. Whirlpools policy clearly is that once you purchase their products, they have no intentions of listening to their customers complaints or concerns only to do the very minimum required.

Whirlpool duet - I have had this machine for 4 years and have gone through as many door gaskets. They rip in no time causing damage to clothing and with the leaking damaging my wood floors. A definite do not buy!!!

we bought a hotwater heater and it gets scalding hot set on the low setting, we had the gas valve replaced by a@e paid for by whirlpool. It still gets above 125 degrees,set on vacation with me using it all during the day.I have contacted them several times, they told me to let the hotwater run about 10 minutes everyday, or just turn the heater off and let it cool off. I bought a water heater to use not light the pilot everytime I need hot water.

We bought the washer and dryer set almost three years ago. Great sales pitch! Energy saver, extra capacity, low water usage, Whirlpool name and I thought we were getting great quality! Three years later I am disgusted, disappointed and am junking the washer. The dryer has a new heating element that we proudly fixed ourselves after the repairmen told us that these were meant to be throwaways. We just thought he did not want to work on it. After watching several YouTube videos we had it apart and found the issue was a cracked heating element. We ordered a new one for 100$ and spent another 4 hours putting it back together. If we had to pay a repairmen to do all that the bill would have been the price of a cheap new one. Fast forward three weeks and now the washer quit and it can be one of at least 15 problems. After reading all these reviews we have decided to toss it as junk. It took forever to was a load of clothes negating any energy saving! Whirlpool should be ashamed of themselves for ripping off all of us hardworking Americans selling us junk. At one time the Whirlpool name meant you could count on a quality product! If Whirlpool really wanted to do the right thing, they would stop selling these immediately and give customers a credit toward the purchase of new washers and dryers!

My fridge is less than a year old. Ive had issues with the part where the ice comes out to fill the trays. Now, I have no ice at all!! My product is less than a year old and this will be the third time Ive had to have someone out to fix it. I called corporate to ask them to stand by their product and ask them at what point they would just replace the whole fridge! The girl I spoke to never once said, Im sorry for your inconvenience! I now have to go without ice for a whole weekend and again wait around from 1-5 p.m. in Arizona with four kids to have ice!!! NOT HAPPY AT ALL!!!

We bought a Cabrio washer less than three years ago. I have never felt that it got my clothes clean. The washer recently stopped spinning and agitating. We were told by a very experienced repair technician today that the gear case and bearings in the tub need to be replaced at a cost of $700.00. Needless to say, I am very upset. I called the Whirlpool Company and after being on hold for almost 15 minutes, I was told that my washer is too old to qualify for any help with repair cost or part replacement. My household consists of two adults. We do on average three loads a week. This is an inferior appliance and after this experience I will never purchase another Whirlpool product.

I am so unhappy with my Whirlpool Cabrio washer and dryer. The clothes get so tangled and twisted that it stretches my sweaters totally out of shape. There is not enough water on any of the cycles that really clean your clothes. I saved my money so I could get something energy efficient and look great in my new laundry room. I would never recommend this product. Your sheets will not come clean because they ball up in the middle of the washer and come out partly dry. I have had this set for 3 years and now the bearing is gone; it leaks from the bottom and throws grease all over my new floor. I have battled the horrible odor since the second month. It smells so bad that I make sure I dont wash the day I have guest over. I am so disappointed and mad at myself for not reading any reviews before I spent my hard earned money. So here I am now 3 years into my ownership and having to spend more money on a defective product. The sad part is that I really thought I was getting something nice that would last me and my husband for years. There are only two of us in our household. This machine does not work properly; now it is broken, but hey it really looks good.

We bought a Whirlpool French door fridge model WRF989SDAM00 in 2013 and were impressed by how it looked in our kitchen. Its December 2015 and things have started to go wrong. First the freezer stopped freezing items completely and found out that ice had built up on the cooling tubes inside the rear freezer wall. Had to be taken apart and thawed with a heat gun. Now the freezer freezes on and off and the ice maker is not making ice properly and leaking all over the left side of the fridge. Went to Sears {place of purchase} and we were asked immediately if we had purchased the extended warranty. We hadnt and were told Sears could do nothing and that these newer fridges have a tendency to have trouble within the first couple of years and thats why they recommend the extended warranties. Really a $2500 dollar fridge a couple of years? Had a local appliance repairman look at it and he said the compressor was bad. $500.00 to fix. Boy do I regret buying this thing. These big companies just walk all over us consumers.

Bought this washer 3 months ago. Absolutely hate it! Leaves white film on my clothes. Have to run all washes through a quick wash to get the film off. Hammers the water through the pipes, causing the fittings to come lose and leak! The spin cycle practically dries the clothes leaving them so wrinkled that I have to dry them longer to get the wrinkles out. Waste of my time and MONEY!

We bought a duet set front loader washer and dryer on 3/14/2010 and our washer already needs new bearing and costs about as much as a new washer. I think that is pretty bad when you can’t get two years out of a product and then can’t get anyone to help unless you want to pay out. I will not buy another Whirlpool product! Done!

My Whirlpool Gold, Model # G16FDRXxQ06, has failed four (4) separate times. In each case I lost thousands of dollars, mostly in high-quality frozen foods. A Sears repair service representative came and repaired the refrigerator. In less than a year, after each repair, I had to call again. Three of these failures resulted in the loss of my food because the refrigerator simply stopped running. Unfortunately, I had been away from home for more than a week. One failure was caused by water leaking. This was apparently caused by a frozen pipe under the refrigerator. The repairman said that this was a routine failure for this Whirlpool model. I would like to recover my financial loss from Whirlpool. Is there a process to claim my loss? Is there a better, more reliable refrigerator?

Its big enough, but the ice maker is always messing up, the shelves broke easily, the water takes forever to get cold from the indoor dispenser. The finish, which is called Satina or something like that, dents real easy. It is really a piece of **! When it was new, we had the repair man out 4 times before it was fixed. He even said it was a piece of junk and it should be lemon lawed out. Drawers broke, shelves broke, and parts are really expensive when you break one of the plastic parts.

Stainless steel, easy to adjust, cools very well installed in a RV instead of standard RV fridge. Took a little bit of carpenter work to make Whirlpool fit but well worth the effort. The only problem I have with the fridge is that whirlpool wont honor the warranty because it is installed in a RV.

I have the same pilot light problems as everybody else. I pulled the burner unit out, and cleaned, and blew everything out, and took a wire brush to the openings on the floor of the unit. I called customer service, and was asked about ventilation. I didnt mention that the heater still didnt work, even when the door to the tin water heater was removed, so venting is not the likely culprit. She authorized a repair that will likely do nothing from the comments I see.The real problem with their customer service, is the apparent stupidity of the computer system. She asked me for the model and ID number. I had to cut through the extra insulation blanked on the tank to get it. However, when I gave it to her, she then asked me if I was ** and if I live at **. If this information was already in the computer, why couldnt there be a search by my name and address, to get the model and serial number. Obviously, I had registered the water heater in the past. Isnt being able to get this information the reason to register in the first place?Now, I have to replace the extra insulation, all because of a stupid inability to create the necessary searches in their customer database. Yes, I could have written the numbers down, but why have the customer registration at all, if it isnt to be used for anything, other than data mining of the customer base.

The unit had all the features that we wanted and considered essential. The unit only weak issues is temperature(s) in both sections. The freezer is very poor with ice build up on the food stored for more than a couple of days. The manufacturer has been very weak in support as to how to solve this problem.

I too expected a whole lot more for the price I paid for Whirlpool WTW5000DW1 HE washer top load. Fuzz, grass, pet hair and food remain after washing. Had a repairman out to look at it. There is nothing wrong with it. He says they do not use much water to save money. Well, if I a have to wash everything at least twice am I saving money? Think. Will look into an old fashioned washboard next time. Frankly I think it is a scam. The HE Tide is more concentrated and my clothes do not come clean! Tried to get my money back from the company that sold it to me and I was told only if I were to buy the $900 Speed Queen. Someone’s making a lot of money from consumers who need washing machines.

Whirlpool Duet Sports washer purchased 11-08 was found defective by service technician due to improperly secured bolts on counterweight at factory. I contacted Whirlpool service and was informed that warranty will not cover any parts or labor. I ordered parts for repair. It will take at least 2 weeks until arrival and repair of item. Clothes washing now were taken to town for washing at additional expense. After repair, only 90 days of warranty was given by the service technician. The cost of $260 to repair item for a possible life cycle of only 90 more days seems ridiculous.

I love my Whirlpool refrigerator, its great. I have not had any major issues with this brand. I only wish that the freezer was made a little different. Im not a big fan of the side-by-side doors. I would much rather have the one with the freezer at the bottom and the fridge at the top...

My dishwasher control board caught fire yesterday. Noxious fumes and black smoke with popping noises moments after starting it. Was glad we had not gone to bed and glad we were home when it happened. Would not shut off and the door was hot to touch. Had to turn off switch on wall.

I bought a Cabrio set in June 2007. Within two years, I had to have the barrings replaced ($800 job). Now, its two years later and Im getting a F50 code. The repairman put in a new part, still got the same code and left. I am out $970. I am a disabled vet/single parent and now I have to buy a new washer. Who is going to start the class action suit against Whirlpool?

We purchased a Whirlpool AccuBake oven in 2005. I think we used the self-cleaning feature about 3 times. The reason I mention this is it may be a possible cause to the frightening experience we had on August 15, 2012. My wife was cooking on the stove top when suddenly we heard loud electrical explosions coming from the back of the oven. We soon saw long arcing bolts of sparks shooting out the back, and my wife was terrified and didnt know what to do. I told her and my son to stay away from it. I ran to the circuit breaker box and turned off the breaker. We then looked in the back of the oven and it was on fire. I ran around looking for a fire extinguisher but my son managed to put the fire out. We called Whirlpool up and explained what had happened. They immediately sent someone out to look at it.I was very impressed at how fast they got someone out there. Whirlpool sent two technicians to look at the damage. After they were done inspecting, they told my wife that the problem is loose connections on Whirlpools side and not the feed and it had a damaged control board and that this is the fault of Whirlpool. He was very polite to us and apologized for any inconvenience. After a week had passed, no one called us, so my wife called and talked to some woman representative at Whirlpool. She told my wife that the report she got said that the oven had loose connection on the feed side from where we bought the oven and we should deal with them. My wife couldnt believe her ears and said, No, thats not what the technician told us, and the woman continued to talk and my wife said, Wait, slow down. The woman replied, Oh, am I going too fast for you? Well, I guess I have to talk slower then, in a sarcastic tone. My wife then called the technician who wrote the report and explained what the representative had told her, and his reply was, I cant believe she said that. I am not happy about this, that is not what I wrote in my report. Dont worry, I will personally take care of this. Again, the technician was civil and polite. After two days passed, my wife talked to the same woman again but this time she changed her story. She never apologized and said, It looks like in this report that the connections were loose to the control board. Since the oven is 7 years old and accounting for depreciation, Whirlpool is offering to you a total of $59. My wife said, Really, $59? How long is the life expectancy of these ovens? She told her, 10 years. My wife said, 10 years? Well, ours only lasted 7 and you are giving us $59 after we were almost killed and my home could have burnt down to the ground? She said, That is our offer.I called Whirlpool back and asked to talk with the safety supervisor and it was a woman again. Was it the same woman? It could have been the same woman my wife talked to, I was not sure. I asked her, When is it appropriate to issue a recall on a product? Our oven was defective at purchase. She said, You are the only complaint we had on this oven, so no recall is necessary. Yes, I said, but since it has been proven this is the fault of Whirlpool, I would expect at least a working oven from Whirlpool. I also told her the technician told my wife that Whirlpool should be bending over backwards for you, and she said, I apologize for the technicians remarks. I told her that I was dissatisfied and she will be hearing from me in the future. I did some looking on the internet and I found that KitchenAid which is made from Whirlpool had issues with a particular oven which was found that when the self-cleaning feature was used, it would heat up the control board, and since most people dont use the self-cleaning feature that often, it would take a very long time to develop. I thought that loose connections and heat are a bad recipe for disaster, and that quality control negligence and inferior components are to blame. Considering the past history and track record of class action lawsuits and appliance malfunctions such as the control board on their dishwashers, I believe it is all connected and related to my problem. Sorry but $59 isnt going to buy me a decent toaster oven, let alone a real oven. That oven should have lasted over 10 years and considering the possible damage and deaths that could have occurred, you would think that it would be in Whirlpools best interest to address this problem and bend over backwards for anyone who had the misfortune of purchasing this mickey-moused nightmare of a disaster-waiting-to-happen problem. Its not so much the money. What if a small child touches an oven as it conducts 220 volts then shocks into a childs heart to ground? What a ticking time bomb this oven is. As far as I am concerned, I dont want a dangerous oven like this in my home and Whirlpool needs to take some lessons in public relations.

The agitator is higher than any I have seen and when we washed aprons that have plastic buckles on them, they get stuck under the agitator. When complained their solution was to use laundry bags to wash 15 aprons in, they are long aprons. Paying a lot of money for the machine and it being commercial I didnt think we would not be able to use it. The whole machine shut down when three of the buckles got stuck. The washer is model # CAE2793BQ and I would suggest that no one purchase one of these machines.

It’s a great stove. I love the glass top. Only dislike about mine is that it doesn’t have the self-cleaning option. I’m very weak in arms and have back injury so bending over to clean it myself is not possible.

I have had no trouble with this ref. There is absolutely nothing bad I can say about it. Once or twice something has fallen behind the drawers/ranks in the freezer.

Purchased this Whirlpool refrigerator WRT771REYM at Home Depot in June 2014. Within a few months of purchase, had to call for a repair tech because the water line had frozen. Tech unfroze it and told us not to block the air vents to avoid this happening again. The amount of care we have to take to load this fridge so as not to have the water line freeze is ridiculous. Its very picky. For a while, we were still having to unfreeze the line every couple of months. Then it became more and more frequent, to the point where we cant keep it unfrozen for more than a few hours. This seems like shoddy design to me. And of course, the warranty is expired so I am out of luck unless I want to pay for repairs out of pocket.Adding insult to injury, Whirlpool claims that this isnt a common issue. Not true - there are numerous reviews about this very issue on Amazon, Sears, Home Depot, etc. Just try googling the model #. Sad that Whirlpool does not stand behind its products. Yet another American company to stop building quality and rely on planned obsolescence to ensure revenue generation.

This morning another chunk of our Whirlpool Microwave handle fell off while I was cooking breakfast. I got on the internet after breakfast and typed in whirlpool microwaves to see if anyone else had experienced problems with their microwave handles and found this site. We purchased a Whirlpool Microwave oven from Lowes in 2011 (over the range model). About two weeks after it was installed, I noticed a crack in the handle. Then a few days after that, a small chunk of glass/plastic fell off of the handle when I shut the microwave door. Since that time, the door handle has been steadily disintegrating. Sometimes chunks of plastic fall off when one shuts the door, even if you are very gentle. Chunks of plastic fall off nearly every time I clean the microwave door, even if I dont touch the handle. Sometimes chunks fall off randomly when Im not even using the microwave. Pieces of plastic have fallen into my cooking pots a few times. Perhaps the steam from the cooking food loosens the cheap glue holding the handle on? What an inferior product! I am very dissatisfied with Whirlpool and will not recommend their products to anyone.

Just like hundreds (maybe thousands?) of others who have had the same part failure causing the refrigerator to leak, I had it and was told by my very honest, highly reputable repairman (not the one KA recommended!) that it was a DEFECT. I bought a French Door style #4609730. First, I complained on Twitter and the Social Media folks gave me the runaround. I kept it up and then, filed a complain with the Better Biz Bureau. They sent the complaint to Whirlpool, who owns KA. They gave me the runaround too - UNTIL I TOLD THEM HOW MY LOCAL TV NEWS station was interested in my story (true, I went to them too). CORPORATIONS SHOULD NOT GET AWAY WITH DIRTY BIZ TACTICS!

I would say that the Whirlpool refrigerator is overall satisfactory and a good product. The size accommodates our refrigerator needs. Would recommend product to my friends and family.

I purchased a Whirlpool Cabrio washing machine April 2016. I was so excited to have a new washing machine. I thought the 1st couple times I used it I just didnt have settings right. It uses so little water it doesnt get all clothes wet. If they are not wet they cant be clean. So I started doing very small loads. Then clothes were not clean. They stink. So I have tried every detergent out there. Nothing helps. Another thing it takes an hour or longer per wash to get not so dirty clothes. Not to mention it puts holes in my towels. I tried reaching out to Lowes where we bought it only less than 4 months ago only to be told they would contact Whirlpool. Whirlpool wanted to send tech that I would have to pay for just to tell me that the piece of crap washing machine is doing everything the manufacturer made it to do. I told him I was not going to pay so. I think with all the problems people there should be a class action lawsuit. DO NOT BUY CABRIO!!!

I call in to Customer Service to get someone to fix my washing machine because it wasnt working and when I called, I forgot to have my washing machine serial number at hand. The person on the other side told me that she cant wait for me to get the serial number more than 2 minutes and I ask myself, if they cant wait for me more than 2 minutes to get my serial number, then why should I wait a week to have someone fix my washing machine?

I have the same issue with cooking time on my Whirlpool wall oven (WFE54OHOES). Bought it in January and have not yet had a single recipe come out cooked. Outside is crisp, inside uncooked, after twice the amount of time it used to take. Its still under warranty. Service came out and told me to bake differently. Thats an answer for you. I am going to pursue this issue with Best Buy where we purchased it.

Water pools at bottom of freezer and onto floor. Has been repaired twice, but still leaks.

I love the brand. I just do not care for the lock lid on all the new washers. I could do without it. I do not have kids to worry about getting hurt. Im looking into finding a brand without a lock lid. I just replaced one before this one. For the lid breaking.

I purchased a Whirlpool refrigerator in 2012 and now it does not work and Whirlpool says a 1300.00 refrigerator only has a one year warranty. Please do not purchase a Whirlpool brand because they do not live up to their brand name.

I’m disappointed in this dishwasher, it’s not yet a year old, and it doesn’t clean the dishes, and it also does not dry them. I now wash and dry my dishes by hand, the machine stays soaking wet even two weeks after running it.

Washer keeps saying F1 and it wont spin. In the middle of load it will stop and it would say F1... It started just a year when we bought it. Now its two years. Its really broke. Before it would say F1 then I give an hour then try again and it works but now no matter what I do it really wont work... I dont know no one who could help me whats this F1... So sad. Its not cheap washer but its junk.

Top loading Washing Machine Model #WTW4950XW2 - You would think that a big company like Whirlpool would make quality washers. NOT! Our top loading washer bought in late 2011 has been making loud noise during the washing cycle for the last 6 months, and last night was struggling to spin. Seriously, with just my wife and myself using the washer once a week, this washer should last over a decade! So I called Whirlpool and explained the problem... and, as expected, they cannot help me as it is over the one year warranty. NO MORE WHIRLPOOL BRANDS FOR US!

I have been a dedicated Whirlpool customer for 50 years. I purchased my new, Cabrio washer and dryer in 2011. The dryer works fine. The washer does not. It ties everything in knots. Most everything comes out in one large, wrinkled lump. When washing sheets, it wraps the whole load in a soaking wet, fitted sheet bubble. You cannot wash one item by itself, because it will become unbalanced and shutdown. I will say that I havent had any repairs yet, but I have a feeling, its only a matter of time. I have decided to buy a new washer, but it will not be a Whirlpool.

These are the worst washer and dryer I have had. I had them for 5 yr and have had repairman at my home 14 times. They still are not fixed. The dryer is so loud you cant hear the TV. Washer squeaks, gets off balance.

The gas water heater that we purchased has been a headache. Pilot went out several times. When we contacted Customer service they informed us that we would have to have a new kit put on it. We ordered that and it worked a while and then we started having the same problem. Just recently we had to purchase another part and once again we have cold water. Fed up.