I purchased a Whirlpool washer and dryer from Best Buy. I purchased one on sale that was a great value. The delivery and set-up went well. However, the model I have had a loud vibrate. The drum in the washing machine would wobble and shake across the floor. I finally had to return it and replaced with same model. I experienced the same issue after 30 days. I didnt take the insurance out and I regret that move.

I have had this range since 2008 and used the self-clean last week. (I dont use the oven that often) Since the clean it has not heated up to required temp. I just called Whirlpool and a tech is coming out this Friday (Nov. 15th 2013). If it is determined to be the self-clean that did in fact cause this, the tech calls for an authorization and the repair is covered by Whirlpool. I will report back what happens.

My Whirlpool Cabrio washer (WTW6600SG2) is a money pit! After reading all of the nightmare stories concerning this washer one would think Whirlpool would offer a recall and try to correct their wrong doing. Do not buy a Whirlpool Cabrio. It was the worst decision I have ever made! Whirlpool does not stand behind their products. I cant believe they can get away with treating their customers so unfairly, taking their hard earned money for crap like this, then not offering to help after so many have had issues. The Cabrio is loud, doesnt get clothes clean, and is always flashing UL for uneven load (when it works at all). My local repairman has made many trips to fix my problem Cabrio. This time he is at a loss. Ill be buying a new washer and it will not be made by Whirlpool! Please, if you are reading this be forewarned!! You will regret your purchase if you buy a Whirlpool Cabrio.

The space could be laid out a little better. The flimsy shelf is not real stable for foods or ice tray. Where the shelf locks into the side wall is not deep enough to stabilize the shelf itself. The flat indentations in the bottom, where they meet the front, have an edge that makes properly cleaning the freezer a bit difficult.

The Cabrio washer does not efficiently clean clothes! The clothes have a type of lint on them after washing, and our sheets have an odd discoloration that stays on them even after drying. We have a max. capacity washer/dryer, & we dont overload. Plus, we use the recommended detergents and the amount of detergent as directed. Fabrics dont even smell clean.

I bought a dishwasher with a 5 year warranty. It broke just after one year of purchase and they are giving me the runaround with replacing after finding that the part the part needed to repair machine is no longer available. The warranty clearly states that they will repair or replace with same or comparable machine and they are refusing to do so. I am at my wits end and I have no one to turn to within Whirlpool as they say it is their decision how they want to handle warranty.

The electric Whirlpool double oven range seemed like a good choice for a single person. I bought it in 2016 around the same time I had some personal setbacks. After finding my emotional equilibrium I decided to return to my much loved baking. While I have no other complaints on this range the ovens are a problem for baking. The digital oven temperature readout doesnt reflect temperature fluctuations in the ovens. Once you enter your desired baking temp the readout never changes even after you open and close the oven door say to take out cookies. Given some of my poor results I suspect even when Im not opening and closing the oven door the temperature is not maintained. I was going to get an oven thermometer but the user manual says it wont reflect an accurate temperature due to way the elements cycle to provide a consistent temperature. Ha! If you want to bake this is not the range for you. My inconsistent results and too often wasted ingredients frustrate me no end.

I will be happy to provide exact details soon but wanted to share I have had most of our clothes and household items-sheets, rugs, towels etc. ruined by this machine. And it is under warranty and Lowes in Dallas, Texas where I purchased it has seen the evidence. I rolled in with a suitcase full of different examples of ruined items and some photos. The repair person Whirlpool sent out was nice but not willing to document clothes and said the machine is fine after a few diagnostics digital checks. He did not run a load of clothes! And it takes forever to set up. My wait was over 3 weeks. etc. Lowes has been incredibly wonderful but states the warranty is Whirlpools decision and all Lowes needs is a RA (return authorization from Whirlpool) and Lowes is happy for me to buy whatever ever washer I like and even are willing to give me a discount as they know how horribly Whirlpool has treated me.The manager stayed on speaker phone with me for over an hour. My husband is a lawyer and I will further pursue this situation as Whirlpool hopes I will just drop it by March when my Whirlpool warranty runs out or give up from protocol internal exhaustion. As they have insulted me in every way... Even suggesting I sell the defective machine to someone else... And I said, How in good faith and having a conscience could I do that? Anyway after spending a lifetime it seems trying my best to get this resolved with a cauliflower ear from being on the phone for so many hours with their resolution leaders and specialists etc. It is obvious I am about to have to go on social media and do everything I can to Save others from this time waster, Save their laundry, etc. and Did I mention at times it leaks a little bit of water out the front. As it was the least of my worries as I was showing nice tech my expensive ruined 900.00 ski pants, ruined shirts etc. I think the machine cost around a 1,000 to 1,200 so... Will get back to you for an update. I have a whole file folder on documentation now and it is not about the money or the fact I cannot wash clothes. It is down to principle... On my third top-level resolution leader in MI. -Jim- basically had me read between the lines that I was dealing with a Fortune 500 company and would never win. He is underestimating the level of frustration and lengths I will go to not be taken advantage of as a woman, a career girl, a wife and a yoga teacher. I will be in Yoga warrior mode and this is disheartening as all I want to do is wash my clothes. Did I mention all my Lulu Lemon pants are ruined and I never put them in the dryer! Only delicate cold etc. Have them remain intact etc. really simple here but Whirlpool not standing by their warranties. And my whole home is outfitted with Jen-air, Kitchen-Aid, Maytag etc. which are all owned by the same company so I have been a very loyal customer who possibly just got a lemon. Or standards at the company have severely changed. More later on developments hopefully. Sad in Dallas.

I purchased a Whirlpool Water Heater BFG1J5040T3NOV from Lowe’s and have had numerous problems. The biggest issue is having to replace the thermocouple three times. It works fine for about a year then I need to replace it again. This is tiresome and wasteful and Whirlpool should be ashamed. As a company that once had a high reputation, this is sad. I would not recommend buying anything from them, especially their water heaters. After repairing this one, again, I will look elsewhere for the next one.

Whirlpool has electronic controls allowing exact temperature settings. It is an excellent range and it has a storage drawer under the oven for storage of pots and pans. It also has sealed burners so no gunk gets under the burners.

In January 2016 we ordered a Whirlpool Dishwasher through Home Depot. First, Whirlpool delivered the wrong dishwasher and the installer took my old one away - leaving minimal options to correct the problem quickly. Home Depot did not make the order Model # error but they did compensate for the error. Now, with 18 months of very low use (2 in household - prewashing all the dishes) the pump on the dishwasher is gone. Before posting this review I contacted Whirlpool via email. Two weeks later I had a phone message and I returned the call only to wait for 30 minutes to get through to a customer service agent who could offer absolutely no solutions or compensation for their poor quality product or service. There needs to be a zero on the scale of STARS to reflect Whirlpools overall quality.

Ive owned the microwave for 2 years, and recently the DOOR AJAR alarm goes off whenever I try using it. The appliance is now essentially unusable. I wish I knew about this known defect before purchasing. I spoke with Whirlpool Customer Care, and they want to charge me to have someone come fix a known defect. The charge is more than what I paid for the microwave. Please avoid Whirlpool at all costs!

After only 14 months of light use, the magnetron in my over-the-range Whirlpool stainless steel microwave failed. The cost to repair was $350. I paid $450 for the whole unit upon purchase. I wrote to Whirlpool with documentation and got a voicemail that they were sorry, but the 12-month warranty had expired. The independent repair person said it is the Korean manufacturer of the magnetron that is the problem. He is replacing units all over town on all kinds of models Whirlpool is involved with, including KitchenAid. Whirlpool needs to get their money back from Korea! I will never buy another Whirlpool product and have told them so.

I bought a Whirlpool over the range microwave in 2015, after about 6 months in I noticed that the microwave door was starting to crack. I thought maybe I bought a cracked one. About a year in the microwave is cracked. Pieces of the microwave are starting to fall on the food I am cooking. The last straw was when my 4-year-old was gagging and then choking on a piece of the plastic that fell from my microwave.

I live in a new community, and this French Door refrigerator with bottom freezer was offered as an upgrade. Two of my neighbors and I have had the compressor break right after the refrigerator warranty expired. Luckily for us, the builder purchased and extended warranty, so we were all covered. I have NEVER had a compressor go out in ONE year.

I purchased a whirlpool gold series microwave model #WMH76718AS one and a half years ago, paid $500.00 for it. It stopped heating. Everything else works on it so it looks like I paid $500.00 for a digital clock and a fancy bread box! I went online and read complaint after complaint that the same thing happened to other people. It appears that the magnetron is faulty. I called Whirlpool and asked their service rep how she would feel if she bought a microwave and after 1 1/2 years it wasnt working. She told me that it was man made and that I should EXPECT things to go wrong. She did offer to pay for parts... which did surprise me. But I have to pay for a $45.00 service call and all labor that it costs to fix it. I called the number she gave me and got a answering machine.... still waiting for them to call me back. I most likely will just throw this Whirlpool piece of junk in the garbage where it belongs. I dont want to spend hundreds of dollars to repair a lemon. I feel that Whirlpool knows there is a problem with their product... that is why they offer to pay for parts. But why should their mistake cost their customers money on top of all the inconvenience. Whirlpool does not back their products or care about their customers after they get your money. I will Never buy a whirlpool product again and that includes anything from their sister companies Maytag, Kitchenaid, Jenn-air, Amana and there are many more. So before you buy anything make sure you check to see who you are really buying it from!

We have already filed a complaint but could not get any satisfactory reply. Our washing machine is not working properly & we are very angry with your service. It has created a lot of problem to us. Kindly do something regarding this.

It never seems to clean the dishes and it runs for 3 1/2 hrs. It is suppose to have all these Features but does a very bad cleaning job. I have used liquid soap, the cascade pods and the jet dry, still gives very poor results. Use to have a Kitchenaid that lasted almost 30 years - great appliance...

We bought a new washer and dryer back in August. We have always bought Whirlpool. Whirlpool (or the government) now is trying to save the planet by regulating the water level in your washer. The water levels are so low your fabric softener & soap leave lines on dark clothes. IT SUCKS! It does not clean like our old washer. Very dissatisfied and would love to return it and get a washer where you can regulate your own water level. Its unbelievable that a manufacturer can make decisions for the consumer like this AND sell this feature which you PAY MORE FOR. TAKE IT BACK! Ill never recommend this product to anyone.

I have a Whirlpool Cabrio WTW5640XW and I was able to get the belt back onto the pulley, about a month back and it ran, loudly, but it ran. Last week the belt popped off again and now the pulleys are screwed, so I probably won’t buy another motor (for the sake of the pulley). Ill get a front loaded Kenmore or something as I was never completely happy with how this thing washed and (didnt dry) our clothes.

Purchased the American Made Whirlpool in Oct. 2020. There is plenty of room and there are only 2 adults in the home. It is a basic no frills refrigerator. We do not even need the ice maker that it has. Would purchase this again. The only negative is it makes weird gurgling sounds on occasion.

Our experience with the Whirlpool Duet Steam washer is the same. Weve had ours about 2 years and have replaced a sensor and the rubber boot (both in the first year) and now we too have had the bearings go out. Weve called Nebraska Furniture Mart and Whirlpool. No one really cares. Its unbelievable that $1800 is down the drain and its acceptable! What are the steps for a class action lawsuit? How about getting some social media involved to get Whirlpools attention? It worked with Netflix and Bank of America. They had to finally listen to the public. So frustrated!

I decided to buy the Cabrio. It was the most expensive, but I wanted to buy American, and I liked the set. It does not do great with cleaning the clothes and they smell when they come out of the washer. Do you have any suggestions. It does not fill with enough water even when using the deep water mode. Please help as I would not recommend this. I called Lowes where I bought it, and they said they knew, but are not recalling, or making any adjustments until Whirlpool does.

18 months old, fridge was not cooling properly. Two service people came including the last one from Whirlpool, said the cooling system is bad and unserviceable. Called whirlpool and they were not helpful at all.

The Whirlpool engineers need to go back to design room sober on this machine. It is only a year old and still I have to run one load two sometimes three times just to get clothes clean. How is this energy-efficient? I have tried all of their so-called remedies. Paying such good money for a lousy and lazy appliance is hard to swallow!

I am in construction and have had to deal with failed motherboards on new Whirlpool fridges that we put in some rental properties. Knowing that, when I went to buy a fridge for my own house, I went to a very reputable appliance company and talked openly about getting a fridge that wasnt going to be a problem. My sales agent and I go back always and he was very open about the problems with the more gadgeted Whirlpools so we picked a low bells and whistles French door fridge to avoid that. It stopped cooling at about the same age as all the rental units did and had a control panel fail. The sales guy and I laughed about how even knowing about the issues I didnt avoid it. Their company came out and fixed it for just short of 300 bucks.Two months later, it stopped cooling again. The service tech came out and this time hit the side of the fridge with his hand and opened a relay getting it to work, at least for another week. The tech told his boss that I must not have shut the freezer causing it to go into defrost mode. The third time it failed, we were out of town and lost all our perishables. We had the same tech come out and replace the board he got to work the last time with a whack to the side of the unit. That board should have been under a parts warranty for 90 days but I may have missed that with the slap repair working for the additional 2 weeks.Im trying to put this behind me but Whirlpool sent me an Extended Warranty Plan opportunity. I can now buy a plan on an almost 3-year old fridge. I am wondering if they are trying to give me the hook up on a bad product or just hoping to prey off my fears and cash in. The company I bought the appliance from has been first rate but their hands are tied by Whirlpool who has virtually no support for their vendors. Before buying a Whirlpool, consider a Sub-Zero. After you figure in the repairs, they arent too far apart in price.

I purchased a Whirlpool duet set on sale at Lowes about two years ago. The front loading washer has been leaking when I put in a full load of clothes. It usually floods the floor when it leaks. I am upset and very angry because this leak has ruined the doors to my washer doors. Apparently, the defects with this machine was known by Lowes and the Whirlpool company at the time that I purchased it (thus the sale price). This was not forementioned at the time of purchase. What a lousy way to do business. Whirlpool screwed me. Shame on me. Never again.

Had a part come off right after our purchase but was a easy fix to repair. The silverware basket also kept coming off until we looked at it and realized it was on wrong. This dishwasher is much quieter than our last one. It also shows fingerprints. We got this dishwasher in a group purchase during a sale at Lowe’s that included the refrigerator a stove, microwave and this dishwasher.

Whirlpool washer WTW7800 Cabrio - I bought this machine in Oct 2010 for $900.00. This October, the lid started not closing. Next thing I know, the glass is popping out. After waiting on hold for 20 minutes, I was told there is nothing they could do but refer me to a repairman at a cost of $179. The glass is popping out. This is a defect not caused by washing clothes but poor workmanship. I am on hold again. I am calling channel 3 news to do a story and will not stop until it is fixed.

My dishwasher is 4 months old and is having some electrical issues. I have had to call into customer service 3 time to try to get a service call. Two of the service calls did not show up. To this Whirlpool said it was not their responsibility. From my experience Whirlpool does not care that the service calls are weeks out, or that the dishwasher does not work.

We were a Whirlpool family, and have been using a Whirlpool front loader – Duet Steam Model # WFW9500TW - for the past nine years without any issues until recently when it started to vibrate. Technician sent by Whirlpool blamed it on failing bearing and that it was cheaper to replace than to repair (In hindsight, I wish we had tried repairing). Naturally, we decided to replace with a new front loader from Whirlpool - Model # WFW6620HW. Our previous version had a max spin speed of 1000 RPM and a capacity of 3.5 cu. ft. This new one has a top spin speed of 1160 RPM and a capacity of 4.5 cu. ft. The main problem with our old one was vibration, and this was being caused by the washer going into high spin while the clothes were not evenly distributed throughout the drum. In one spin, the clothes would spin perfectly without any vibration, but in another spin of the same cycle, the washer would not allocate that same clothes properly throughout the drum, which leads the drum to cause vibration from unbalanced high spin. Vibration is a problem, because like most Americans, we live in a wood frame house, and have a basement underneath with the washer located on the main floor. Vibration from unbalanced high RPM spin gets sent down to other areas of the house, causing damage, drywall cracks, separation in trims, etc. And these are all only the damages one can see with their eyes.One point about vibration and some myth busting. Provided that all your washer legs are meeting the floor and not on a saggy floor, your washer should not vibrate more than it does during an empty spin. If it does, then it is due to faulty, poor design/engineering. What happens is when the steel drum becomes unbalanced with laundry in high spin, it starts to shake as more of the weight is on one side, which one can notice looking inside the washer window. There are concrete weights fastened to the top and bottom of drum to keep the drum in place and to reduce its shaking tendencies. However, this weight also causes the washer cabinet to wobble if the drum itself is shaking. This wobble in turn causes the washer legs, which may be firmly grasping the floor, to very slightly come off the floor, which one can feel if touching both the washer feet and floor with their finger at the high spin of an unbalanced spin. And that motion of legs coming off the floor and hitting back at high RPM is what causes vibration to be felt on the floor and to be seen on the cabinet. Of course, this effect is amplified with washers that decide to go into an unbalanced spin with an even higher max spin. When our old washer perfectly balanced the clothes, it behaved like it was running high spin while the drum was empty. This is how all washers should behave, especially in America where the vast majority of homes are wood frame based. However, that was not what we experienced with this new Whirlpool. If a washer is not capable of balancing out the clothes, extra function or feature should be deployed in containing the drum shake to within the drum, and not allow it to escape.First, our old front load Duet Steam Whirlpool was Made in Germany. This new one is ‘assembled’ in America. The door window of the new one is plastic and feels cheap and flimsy, but I expect all the darker color door windows of newer front loaders to be plastic. Consider it cost cutting. We did not look for additional anti-vibration technology because our old Duet didn’t have anti-vibration features aside from its two springs and four suspensions. We decided not to use Load & Go because I have personally seen liquid HE detergents gum up over time, so I didn’t want to risk it gumming up inside the washer.After the installers left, I spend an hour cleaning the outside of the washer to perfection. Sadly, time wasted. Once I was done, I first did a wash without clothes, and then with clothes in Normal, fast spin cycle with drum about 2/3rds full. Just pants and t-shirts. There is a recirculating pump at the top of the drum to distribute the water, and to also distribute soap mixed water. But I am not sure if this is without problems. These pumps can collect soap residue with time, and you will eventually end up rinsing the laundry with soap mixed water even in rinse cycle.In getting to the first spin in wash cycle, I was flabbergasted to see how, just how rudimentary, I want to reiterate the word rudimentary, the load detection was before entering high spin. Our nine-year-old washer had a more comprehensive one. The new washer would spin the clothes at very, very low spin and simply see if the drum is most evenly spinning. That’s all. Compared it to our old washer which would also shake the drum to see if there was movement from side to side, because clothes can change their position when entering high spin. This rudimentary load detection causes the new washer to create an even worse uneven load distribution around the drum before spin, even though it may seem even at very low RPM. So, why is the new washer’s load detection so basic? I believe it is due to ball bearings.Front load washer models from other companies employ ball bearings to reduce vibrations from uneven loads. Whirlpool does not employ such feature, at least, they do not advertise them. However, to my surprise, I hear metal balls hitting each other every time the drum direction changes during the wash cycle. I inquired Whirlpool about this and I received contradictory responses. My theory is that the basic load detection before spin speed is used because Whirlpool assumes any changes to load distribution will be taken care of or reduced by the ball bearings of the washer. But this ultimately allows the washer to go into more uneven spins. The bearings may also be used to increase the tolerance of what is considered an ‘unbalanced load’ in order to get the washer to go into spin cycle faster, decreasing the time involved of the washer to go into spin cycle. Sadly, to my dismay, the new washer ended up causing a worse vibration than our old one with failing bearing.I called up the retailer the same day of delivery and complained of vibration. He first sent an installer to see if it was installed properly, and upon showing the installer of the vibration issues, the retailer sent me a new washer couple of days later thinking the first one was a lemon, and even though it has less noisy draining noise, it too exhibited the same issues with it going into significantly uneven spin. In the end, we decided to return the Whirlpool washer all together, at a loss of $200 because the retailer did not hold up to their spoken return policy.We have done many loads in this washer to see if our loading is an issue, loads of varying sizes, loads of varying types, loads of weights, and we maybe only had an evenly distributed load around the drum about once or twice. Once it was a King comforter. But, like our old washer, this too ended up not distributing properly around the drum in the final spin cycle and started vibrating, even though it was vibration-free in the previous high spin cycle. This proves that the problem exists directly within the washer, not the floor, leveling, load, etc.Some other problems with the washer: - The washer door, Load & Go dispenser at bottom, and single load dispenser at top are all plastic parts which all vibrate significantly during fast spin cycle. Especially the Load & Go dispenser which keeps hitting the cabinet to make banging noise. - Drain sounds are much, much louder than our previous Duet. It was even louder in the first one we received. Combine this to uneven spins and this washer can perhaps compete with an engine in terms of the sound it generates. - Single use dispenser at top left will hit the washer door if washer door is opened when the dispenser is also in open position. - Buttons are sometimes unresponsive, to which I have to power off and try again. But this has only happened a couple of times.- There is a small ¼ in. opening where the steel drum meets the rubber gasket, opening in which items like coins, etc., may fall through and are irretrievable. Don’t think small socks would be affected.To potential buyers, I suggest you proceed with caution when it comes to this washer. Understand the retailer’s appliance return policy and make sure it is shown in paper. It can save you a lot of headache. Get the extended warranty of three years because manufacturers only give you one-year warranty for a reason. I would also suggest that you avoid this washer at all costs if you have any floor level below where this washer is to be installed, especially if the level below is a basement. Your house is more important and more valuable than a $1000 washer.In the end, I am very disappointed in Whirlpool, an American company. Perhaps Whirlpool focuses their attention on top loaders, not front loaders. But Whirlpool had nine years to improve their washers, and it is sad that we may now have to go outside of America for a quality product to be used in American homes. P.S. No solicitation please, Whirlpool. This washer is in the process of being returned. P.S.S. I already posted this review in Whirlpools website, and it is under moderation.

We purchased this Gold Series Whirlpool Dishwasher about 4 years ago. It worked very well up until April of this year. At that time, the main pump stopped working and it has to be replaced. There are just two of us in the household so the dishwasher was only used 2 or 3 times a week. We also kept it very clean with no build up. The gasket around the soap dispenser came out and one of the wheels fell off of the bottom rack. We just feel that 3 1/2 years is too soon for a major appliance to stop working and fall apart, especially given the light usage.

Dishwasher has had multiple issues in the 4 years of use. - Incomplete cycles - need to call repairman to figure out why the dishwasher does not complete cycles, fills with water but doesnt go into clean cycle - In 2 years had to replace grommet due to leaking water. - Top rack slide rail plastic ends broke needing to purchase both new ones. - Detergent door quit opening - door does not open during entire cleaning cycle.- Design flaw with silverware rack on the door, be careful not to block or silverware will not get cleaned.

The only model number I can find is W10484489A.... Do NOT buy this machine. It is pathetic!! This machine cannot handle more than 2 bath towels at a time!! It will just keep trying to spin, yet NOT spinning, then when you stop it, there is no choice to just spin again, you have to rinse and spin!! Unbelievable.... takes a whole evening to do one load of towels!!! (actually a whole evening to do 2 towels) I hate it!!! Not to mention, whatever they designed between the tub and the door, a rubber whatever it is, is nothing but a catch for disgusting bacteria and slime. Considering the amount of wash I DONT DO, this is unacceptable, even though I have bought and used the new washing machine washing stuff!!! Honestly.... had a Maytag Neptune before this machine..... that is the way to go folks, pay a little more, but way more satisfied. Cleaned like a gem, unlike this whirlpool, cleaning is at best mediocre!! Unfortunately, I broke it, asking it to wash huge 120 in round table cloths for my business, and heavy chair covers..... Had I have know.... cant even wash 2 towels in this new Whirlpool machine!! It is heading to the curb with all its disgusting places you have to clean, I will pay someone to take it away, seriously cost me a ton of money in re-spinning (or yeah, and re- rinsing, cause you cant just spin something), would have been better to fix my MAYTAG!!! I hate Whirlpool!! Do not buy one!!

I am somewhat satisfied with my induction range. We ordered it just before Thanksgiving from Lowe’s a year and a half ago. We were told that we would have it before Christmas, which was fine with me. I don’t cook for Thanksgiving. Just a lot of Christmas baking. It turned out that Whirlpool had not started making our range until January and it wasn’t delivered until mid-January. It had been really good until about a month ago, when it blew the circuit breaker. My husband was cooking dinner while I was at work and it just blew the circuit breaker. No power surge in the rest of the house. No other circuit breakers affected. When the power was turned back on, two burners were out. As it turns out, the main circuit board is dead. So now the one large burner, a small burner and the ovens don’t work. There are two circuit boards for each oven. When it is working, it is a great stove. However when it doesn’t work, it is costly and takes a while to get repaired.

Model WTW4850OXQO. Purchased this washer in Nov. 2011. Two months ago the washer began making a loud grinding noise in the wash cycle, so loud it can be heard throughout the house. Called the dealer whose serviceman said it was the gearbox and it would need to be replaced. Cost of the gearbox $235.00 plus $165.00 service. Called Whirlpool in TN and was told that I didnt purchase their 1 yr warranty. What the hell is a 1 year warranty but me paying Whirlpool to fix their defective piece of crap in case it breaks in the 1st year. I owned a Kenmore that lasted 11 years, an RCA that lasted 12 years, and a Maytag that lasted 10 years. Never a problem til they died of old age. This piece of ** is breaking down after 3 1/2 years. NEVER buy Whirlpool! Also, the inside of the machine SMELLS. My wife has to use bleach or cleanser to get the smell out. Once again a company in the USA thats too big to care about its customers!

We purchased a Whirlpool Cabrio Platinum washer and dryer from HH Gregg and have had continuous issues with the washer. We have had the lid springs replaced two times since we purchased it and they are out again. I called our service company to ask why we have to continue to replace the springs very 6 months and they said it was a problem Whirlpool was having with this unit. I called Whirlpool and after being on the phone for 45 minutes, they told me there was not a recall, but I could buy the parts directly from them for 1/2 price. This amounts to about $20. The repair cost me about $200 every 6 months because it is a difficult installation. Whirlpool is a terrible company to deal with when you have a problem and they do not stand behind their products. I will never buy another Whirlpool product and will tell everyone I know the same.

We bought a Whirlpool Gold Refrigerator from Lowes just over two years ago and have had trouble with it starting a year and a half later. It kept freezing up and the top refrigerator compartment wouldnt get cold. We had to defrost it every three months. Now it doesnt even work. This expensive unit is less than two and a half years old and Whirlpool expects us to pay for the repairs. What happened to the days when a refrigerator would last 30 years? I hate to say it but be smart and buy Japanese. At least they take pride in what they make.

Worst purchase I have ever made. When I purchased this Cabrio washer in 2015, I didnt find bad reviews but how I wish I had. This washer does not clean clothes well. It has caused holes in clothing and towels. Often all the load wont even be damp even if using the deep water feature. The wash loads rarely fill more than couple of inches. Clothes come out twisted and terribly wrinkled. Sheets and blankets will be half dry and unclean. TERRIBLE APPLIANCE. WOULD NOT RECOMMEND. Now I am stuck with a high priced washer I wouldnt even feel good about giving away. WONT FILL. RUINS CLOTHES. TANGLES LOADS. DOESNT CLEAN. DOESNT RINSE PROPERLY. DO NOT BUY!

We bought a Whirlpool refrigerator, model ED5LVAXWSOO. Although we didnt need or want the ice/cold water dispenser, we bought the model anyway. We have never hooked up nor used the ice maker/water dispenser. As the refrigerator was powering up upon its initial start-up after delivery, we found that condensation was leaking from the ice maker on the door. Upon closer inspection, we found that the hatch cover was not sealed and actually jiggled around when the door was opened or closed. A service man came, had difficulty with the issue, but eventually said he fixed it. It didnt leak again for almost three years. Then the exact same problem. (Remember, the component is still neither hooked up nor used.) Apparently, the opening and closing of the doors eventually caused the same defect to reappear. Of course, since the warranty has expired, Whirlpool sees no obligation on their part. But the value of a product is not based on a limited-time warranty, but on how the product holds up. This has to be a manufacturing or design defect as it came from the factory broken, and eventually the same problem re-appeared even though there was no wear and tear on the component, as it is not used. These products are much too expensive to begin failing after a few years. I would caution buyers based on the product being delivered broken (wheres their quality control?), its lack of durability even when not being used, and the Companys disavowal of any responsibility beyond the limited warranty period, even though it is a recurrence of the original problem (which to me means that it wasnt properly repaired/corrected during the service visit). Whirlpool eagerly grabbed our hard-earned money, but delivered an inferior product made worse, in turn, by its sub-standard service and lack of accountability.

One year old Whirlpool gas oven/range w messed up control panel. Every brand new Whirlpool so far has broken or is messed up within first year of purchase. I am going to complain to BBB.

We just received our brand new Whirlpool washer and dryer from Home Depot. The delivery person started the washer and started the dryer and promptly departed. My husband immediately put a load of laundry into the washer, and he noticed there was insufficient water levels to adequately wet the clothing. Approximately 3 tablespoons of warm water were added at intervals of approximately one minute each. The water level never rose above 3 inches at the bottom of the tub despite setting the washer on the heavily soiled setting. After the spin cycles he removed the extremely damp clothing and it appeared that the machine had not properly completed the spin cycle and drained an insufficient amount of water from the clothing. He tried another load, and it appeared that the sensors were not working which regulate the water levels because most new machines use far less water. However this washer was defective. He then placed the clothes in the brand new Whirlpool dryer. The clothes ran for over five hours and never dried and the dryer never got hot. There was obviously something wrong with the thermostat. We are both disgusted and will never ever buy a Whirlpool product again. In addition because of the extremely poor response from Home Depot, we will never purchase an appliance from them again either. So sad that Made In America, which was on a sticker on the front of the machines, does it mean diddly squat these days.

I paid over $1,000.00 for a washer based upon previous experience with Whirlpool appliances. I am single, over 65, and use this machine infrequently, as compared to when I had children. The only thing Whirlpool is offering is another of their machines at a discounted price. I value principles more than dollars. I refuse to give them another $600+ as a reward for making junk which apparently should have been recalled. The part I need is not available any place Ive found online. And it completely controls the power to the machine. You cannot open the door, you cannot turn it on. I had two service calls to discover this part is not available.

Purchased water heater in 2005 with a lifetime warranty. We had our first problem May 30, 2013. Water would not heat above lukewarm. Called Whirlpool. Our plumber and Whirlpool determined that the temp sensor was defective. Plumber took it off and it appeared it had shorted out as the wires were black and plastic coating had slightly melted in one spot. We had replacement part in 24 hours. Licensed Plumber did repair (2 hours @ $75/hr = $150). Second problem occurred October 23, 2013. Not even 5 months later! No hot water. Hit reset button, turned temp up. No change. The diagnostic light on water heater indicated it was the same problem as before. Called Whirlpool. They sent out repair part which arrived in 24 hours. Licensed Plumber repaired (1.5 hours @ $75/hour = $112.50).I took a picture of the melted plastic caps where the wires screw into, of the housing around the wires, of the melted, charcoal crispy black of the Junction Box in the area that was directly above and covered the wires and sensor panel. It was much worse than last time. Plumber said that the part that screwed into the plastic cap had to be pried out and it broke off. You could see that this might be the spot where the problem started. We feel fortunate that we didnt have an electrical fire start from this problem. Something isnt right. Within less than 5 months, we have spent $262.50 to repair a water heater that has a lifetime warranty. Id like to give this 0 stars. Whirlpool owes us $262.50 and it might be more before this is all said and done.

On December 21, it became clear that I needed to replace our 13-year old Rheem water heater. We decided to buy one from Lowes, 36 miles away and have a handy man install it. He installed the new Whirlpool 50 gal gas water heater with a 12-year warranty on Friday, the 22nd, but could not get it to stay lit. He called Whirlpool to troubleshoot. They said it could be one of two parts and that they would ship the parts on the Monday after Christmas. He asked who would install and they recommended a local plumber. He called that plumber but they indicated they did not do Whirlpool warranty work and would have to charge.On Monday, I called Whirlpool and was assured the parts would be shipped that day for overnight delivery. I confronted them about the local plumber not doing their warranty work so they set up an appointment with a company called A&E for Wednesday morning. On Tuesday morning, I called Whirlpool to get the tracking number on the parts and was told that they did not get shipped on Monday as promised but would be shipped that day, arriving by the end of the day Wednesday, too late for the appointment for installation.By Tuesday night, my wife got on this site and was appalled to read the numerous identical complaints. I decided that Wednesday morning that I would hire a plumber to remove the Whirlpool and install another so we would not have a lifetime of problems from Whirlpool. The plumber installed a different water heater. It started right up and we have had no problems since. I got an R or RA number from Whirlpool which I think they only gave me because the parts had not arrived on time and I returned the piece of ** to Lowes for a refund. Lowes has a seven-day return policy of these.

Bought a Whirlpool Gold model GI6SARXXF04 less than two years ago and have already had three problems. The first was a faulty main water inlet hose that dumped water all over the kitchen floor. It was still under warranty so I didnt have to pay for it. Now have two additional problems. About two months ago there was a puddle of water under the refrigerator every few days. I finally figured out it was ice build up in the bottom freezer chest that melted that caused the water leak. The second issue is that the ice maker just stopped working. It had been working great this whole time and then suddenly it just stopped making ice. I contacted Whirlpool and they will cover the repair for the defrost issue but not for the ice maker. Gee, thanks, way to backup your product. Im guessing the reason they dont backup the ice maker is that its probably the more expensive repair. Like many people here I also will never buy another Whirlpool product again, regardless of what it is. Theyve shown me that not only do they produce inferior products, they also arent interested in customer satisfaction.

My NEW Whirlpool top loader just stopped working. I bought it in June 2015. The extended warranty I purchased ended at the end of June of this year. Guess what happened a few weeks later? The thing died. Seems totally fishy! My parents washing machine lasted 20 years. Why does this one die weeks after the warranty expired?

The shelves in the newer units are plastic not glass with metal and they rip/break holding heavy contains like gallons of milk, and they are more expensive to replace. I just wish they would go back to building things like in the old days. My last refrigerator lasted 20 years. Ive had this one a year paid twice the price and already had to replace shelves and trays for it..

I bought a Whirlpool fridge. On the 2/29, I called service for Whirlpool on 3/2. No one was able to come out until 3/5. So, I had the inconvenience of food being stored, time away from work, and food spoilage. The fridge was fixed and worked until I wake up today (not even a week) and the freezer is thawing out yet again. Again, I removed food and there’s more spoilage. I’m waiting for service to arrive some time today. I called Whirlpool and there is no compensation of any kind. I’m never buying a Whirlpool product again.

I bought this nightmare machine one year ago, and stop working. If I try to program a cycle it put itself lock so I can not use or program any cycle. I can not open the door and start a noise like it was draining without clothes at all. And when finally it ends, the machine is like dead, no works, no programs no nothing. I am sick of this appliance. It is almost new and just does not work as it should be. But the worst is customer service, OMG. They lie about everything. The technician came to see what was the problem and told me it was the card, so he could not do anything until the factory send the piece to the place where I live. Well this happened one month ago and I am still waiting for the service. My guarantee was still on time, but every day at customer service they have a excuse/lie that the piece is on my way and service will be completed. Well I am still waiting and nothing happens. I am desperate. No one cares about the customer. If I would have known or read the bad reviews about these washing machines I would have never bought it. I got it at Walmart. I regret deeply. I do not know where or what else to do. Nobody cares or listen. Shame on you Whirlpool.

We purchased a Whirlpool refrigerator in December 2017. Since July 19 we have had the same problem with the refrigerator three times. The technicians don’t know how to fix it and Whirlpool refuses to replace it. The customer service rep was ignorant on the phone and could care less about a problem. Even though there is a lemon law they refuse to replace the refrigerator. We have to defrost the refrigerator every 2 to 3 weeks so will cool down again. Whirlpool is the worst company we have ever dealt with customer service wise. Lowes will not do anything about it because it’s within the first year.

After 2-1/2 years we started having trouble with the spin cycle on our Maytag washer. We live in an area with no repairman. Whirlpool want us to pay just to talk to us. Now the timings off. It will not spin out.

Ive had my Whirlpool Refrigerator for 2 years. Within that 2 year period, all 3 of the drawers within the refrigerator have broken and now there is a crack in the freezer on the bottom starting in the front and going straight back on the bottom to the back and up the back. After pleading my case for a new fridge to their Customer Satisfaction Department and everyones supervisor therein, theyve offered to pay for the epoxy repair. Im very dissatisfied with this! I dont think that a $1300 fridge should be held together by glue after only 2 years. Ive been waiting for one of the drawers to be replaced for over 2 months. They claim that the crisper pan is out-of-stock and they have no information if it is in production. Im to call back in 2 weeks to find out the status of that part. I would like to add that my husband and I work 6 days a week and our adult children are rarely here, so this refrigerator is very lightly used. We dont have a household of 6 or 7 people constantly home, opening the doors and sliding out the drawers. The fridge that I had previously was a GE and it lasted 30 years. I guess the next one will probably be a GE. I just wanted something different. Well I got it. Its something broken.

Whirlpool Gold with bottom freezer, had it for about eight years and no problems. Great seal and great storage space. Also plenty of space in the freezer. We are a family of four. It is extremely quiet. There is flexibility as to how to mount the shelves and they are easy to clean. I have never had any spoilage.

I bought a 3 burner glass hob under your built-in cooktop category (model no. AKCG 930-90 cm) in Nov. 2015 from Coimbatore, Tamil Nadu. In the month of April 2015 I started having problems with the medium burner. The problems was rectified on 29-4-2017 after some replacements that cost me Rs. 5000. After two months again the same problem occurred, the medium burner was not igniting again, I registered a complaint on 5-7-2017, the representative came and did some maintenance and left but the same problem resurfaced after a few days.I was fed up of complaining and started using the burner during necessity by placing a weight on top of the knob. Finally on 15th Feb 2018 while I was using the stove the glass top cracked into pieces. My experience of the companys built-in cooktop is horrible and bitter. Every time I registered a complaint the representatives used to attend the complaint after 2 weeks and that too after so many phone calls. I am really dissatisfied with the service and quality of the product. I therefore strongly recommend customers not to buy this product.

It knotted my clothes up and twisted them to the point that clothes are so badly out of shape, hems are pulled out and some clothing torn. We no longer use the washer. Also, a very bad film all over our clothing. I have just tonight contacted the Whirlpool company as I have made numerous complaints to the business where I bought it to no avail. The day after buying and using once, the store sent a repairman out and he said use it on delicate. I have done that with the same results. I bought my washer in December of 2011. I am hoping Whirlpool contacts me. If not, we can contact the state attorney generals office, Consumer Affairs and our main TV station to make complaints. I do not have photos as I did not know I would need them. I am giving Whirlpool a chance to respond in hopes that a remedy is available. Maybe as simple as replacing the agitation device.

Bought a Whirlpool Cabrio Washer Dryer combination on 4-5-2009, had it delivered on 4-20-2009, was very excited to get this set as it was like my first ever brand new washer dryer. I thought Id spend the money get something good and it would last for years and years. Was I ever wrong. I bought the set and the extended warranty from Lowes and my total with delivery was 2579.00. 20 days after the extended warranty expires (that I never used) the bearings on my Washer go bad. This thing in spin cycle sounds like a jet engine. I called to see if Lowes would still honor my warranty because I never used it and they said no. I called Whirlpool and checked to see if there was a recall and they said no. I checked to see if there is anything they could do at all because this is a huge known issue and of course they said no. (Just look on YouTube for Whirlpool bearing replacement and the amount of views should indicate the amount of troubled users.)Called a repair scheduled through Whirlpools website to come look at it for a 75 dollar assessment and they said it would be about 500-550 to replace the outer tub - largely due to the fact its labor intensive and the bearings are packed in the outer tub from the factory. I was like are you ** kidding me? I paid 1029 for the unit brand new in 2009 and 550 to fix? I said thank you to the repair guy and escorted him nicely out. Upon that I called back Whirlpool to tell them how displeased I am and how I will not be another product of theirs ever and mostly due to the fact they know this is a huge issue and wont do anything about it. I will be going to Lowes to see if the guy who sold me this pile of crap will work me a deal on another unit or set of another brand after I show him my receipt and express my displeasure with that product. If they wont do anything I will go to another store and spend my money elsewhere - I have choices and others do too. So if you are thinking about buying anything in the Cabrio line, dont. Go Samsung or LG - 10 year warranty straight from the manufacturer and costs 200-300 less than I paid for my washer dryer 5 years ago. The bearings are ** and shouldve lasted a lot longer for the amount I used this machine and for what I paid! Shame on you Whirlpool for using crappy parts to make your machines.

I do like my Whirlpool refrigerator, but it started to not cool things anymore. I had to get it fixed. The professional I had come out to fix it said that these particular Whirlpool models didnt have a specific part they they needed. It also got built up with ice that needed to be broken down. Overall, I wouldnt buy this model again, but that doesnt mean that all Whirlpool refrigerators are bad. Just this particular model.

I purchased this Whirlpool Cabrio washer three months ago from hhgregg. If I hit the lottery, the first thing Im going to do is take it to the dump and buy a new washer. There is no way to wash a load of towels in this machine. I started a load at 7:35 this morning and it is now 9:53 and Im still dealing with the drain and spin cycles. Over and over, I try to get it to spin out enough water that I can put the towels in the dryer. I should have suspected something when I saw that the washer even had a separate drain and spin cycle. It should have told me something. Its a piece of junk. Never again. Im back to Kenmore.

Purchased a Whirlpool French door in April 2020 during the pandemic for 2K. The first week of owning it my fresh vegetables froze. I lowered the factory set temperature by one degree. The next week the ice maker stopped making ice. 3 days later it started up again. The 3rd week my freezer food defrosted and the ice maker stopped making ice. Called Whirlpool And requested a refund. They said, No we will send a tech. The tech determined the control board was defective. I had to empty the entire fridge and turn it off, defrost it for 24 hours. The headache to find someone to take your food! The part took 2 weeks to get replaced.The tech said, If this doesn’t work we will have to come back and take the back off to see what the issue is. Told to defrost again for 24 hrs. The ice was so thick we did it for 48 Hrs. 1 week later ice started to form in the freezer and the ice stopped working again. Called whirlpool demanded a refund and they said no. A tech will come again. I’ve relocated my food 3x already. How many more times can I do that! Whirlpool is not concerned about their reputation at all, as I read through other reviews of situations similar to mine. Do not buy whirlpool!

WHIRLPOOL WTW5000DWO WASHING MACHINE TOP LOADING 2014 MODEL - I purchased this above model at Lowes of Hagerstown MD. The first problem I had with the washing machine was the spin cycle did not wring out the clothes. The second problem was the spin cycle caused the washer to start walking. The washer was leveled prior to washing the clothes also water was still running into the washer after it cycled off. I call Lowes the next day and told them my problems and they replaced the unit with the same model. The delivery came and I hooked up the washer and placed a few items in the washer and allowed it to cycle through. The washer did the same thing all over again. It did not spin the clothes out and the water continued to pour in the washer. And spun out of balance. I contacted Lowes and advised them I was having the same problem. I also told them my cousin had the same model and they were also having the same problem. Lowes offered to replace the unit with a different model so I selected Samsung washing machine and I have it scheduled for delivery tomorrow. Also I wanted to let you know that the price difference was 100 Dollars more for the Samsung and Lowes told me that I would have to pay the difference. I told them I have been inconvenienced twice and I will not pay the difference, they then call in the store manager and he override the difference. Lowes of Hagerstown will try their best to make it right, its sad that the mfg will not bring a product to the market that will do what it is advertised. The federal and state government should fine these companies and replace the defective models when reported. Do it right the first time and you wont have a repeat of the same problems. Also not use the consumer as a guinea pig to try out new products.

I bought this piece of junk heater (serial no. 0804T411536) from Lowes and had their contract plumber install it in or about 2008. Since that time, I have had nothing but trouble with it. It just doesnt stay lit. Every plumber who works on it tells me that they have numerous problems with them and they cannot repair them - the customer has to get the part from Whirlpool. And today the woman I talked to told me that I had to pay the shipping charges, which vary according to how quickly one wants hot water! I personally find that a true rip off. If you cant guarantee the product you put on the market, then dont put it out there. I will never buy another Whirlpool appliance or shop at Lowes!

I wish I had gone on this website and read the reviews before I bought my washer about two years ago. I thought the Whirlpool Cabrio was going to be a good machine because of the brand name and because it is one of the more expensive washers. Like many others have said, I am disappointed with this washer. I bought it because it has a large capacity, but mostly because it has a hand wash cycle and a deep water soak. I have found that the only cycle that actually may get clothes clean is the Bulky Items cycle, because it actually covers the clothes in water. Some of the other cycles dont even get the clothes entirely wet. And the deep water soak doesnt wash the clothes, rinse them, or spin them dry. I might as well pre-soak clothing in my laundry tub, and then put them in the machine to wash them. Prior to this machine, I had a Maytag Neptune front loader, which did alright, but it had a few problems. I am ready to go back to the inexpensive agitator machine my mother used to have, if anyone still makes them. They at least got the clothes clean, and you could soak clothing if you wanted to. Im sorry that I bought this expensive washer. I wish I had bought a relatively inexpensive, simple machine. One good thing about this machine though is that I was able to wash a sleeping bag on the Bulky Items cycle. So, I didnt have to take the sleeping bag to the laundromat. Whirlpool needs to improve this machine or go back to the drawing board and create a new one.

This was a substitute for model I actually wanted, I was told the one I would receive was the newest model version of the model I wanted. What that meant was it was the stripped down version. It does not get clothes clean nor does it spin/balance the load which causes it to walk around the room. It is only 9 months old and I need a repairman.

On 16 March, I lodged the complaint to Whirlpool’s service center in New Delhi. My service request number is **. Engineer’s name is Dharmesh. He came for the first visit and he sent the person named Hassan who said there is gas leakage problem. I told him that problem is much more complex than leakage as I have already checked about the leakage, but he didnt listen and repaired and took Rs 2995 from me by giving 3 months warranty. The fridge again got damaged. Now, when I talked to Ms. **, she said the compressor is damaged and it will take Rs 2000 more, which means my earlier Rs 2995 has gone into vain and they are demanding Rs 2000 more, though it is in warranty. When I asked her that I want to talk to a senior manger, she rudely talked and refused. I called Whirlpool’s customer care on 01160008558. There’s a guy named ** who abused me and behaved rudely with me. The customer care executive doesn’t even have bit of manners as how to talk to the customers. It’s really a shameful thing which I had not even expected from the brand company like Whirlpool. I want very strict action to be taken against Ms. **, Mr. ** (CCE). I also want my fridge to be repaired as soon as possible without a single penny or I want my earlier Rs 2995 back.

I have been extremely dissatisfied with the Whirlpool Cabrio washing machine!!! I tried to take it back and Lowes would not let me return it because I had had it for 6 months. It doesnt put enough water in the machine to get all of the clothes wet. It doesnt get the clothes clean and it leaves some kind of lint residue all over dark clothes. I am only able to put in 1/4 of the clothes I put in my Maytag washer which I loved, but it wore out. I am also short and it is so deep I have to use a stool to get up on to reach into so i can reach the bottom of the machine. Even though it is a huge tub, I can only put a few pieces of clothes in it to get it to clean the clothes. It is a very poor design and needs to be recalled!

The fridge had been leaking just a little for a while until the leak picked up and left a puddle. Turns out this plastic tube connector cracked. Seems a very poorly designed fit that caused the bend in the plastic to rupture. Now the whole tube and what I think is the water inlet valve will need to be replaced.

Purchased this Dishwasher on Feb. 28, 2015. In June 2016 about a 2 by 3 inch section of the enamel face on the door rusted and fell off above the air vent. After three hours of hold time between Lowes (with the extended warranty) and Whirlpool (their warranty department) it was determined that this was not covered by either warranty as it was beyond the date of the 1-year mfg warranty and was not covered by the extended warranty (it was only a cosmetic issue). As these calls took place over a matter of 2 days, it was interesting that between day 1 and day 2, Whirlpool had issued a statement that no rust repairs would be covered under any warranty repair - regardless, unless it affects the functionality of the dishwasher. In other words, they KNOW this is an issue with this model and are doing nothing to fix the problem. I must say that the folks at Lowes were most helpful; cannot say the same for the folks at Whirlpool. I do not think I will trust their products again.

Received power bill and it had doubled. Went straight to water heater. Bought water heater 02/11/2011 and 12/25/2013. The brain they call it on top of the heater has a screw that has blown through the metal plate.They do not sell this type of heater at the stores so this must be a problem with all this type heater.

We bought my Whirlpool top loading washer and dryer back in 2005, and they have not disappointed. Apart from needing a heating element replaced due to poor ventilation one time, both machines are extremely dependable and wash our clothes quite clean!

My husband and I bought a new Whirlpool Cabrio Platinum Series Washer and Dryer in November 2012 from Lowes. My clothes, especially towels, smell like mildew and mold since I have used it. I thought it was just me. I have even thrown some items away when they smelled so bad. I love doing laundry but this not being able to have clean smells was driving me crazy. I tried everything I could think of but to no avail. Finally in October of this year 2015 my washing machine began to make a loud noise. My husband said sounds like a bearing is going out. I immediately sought a repairman thinking that it would be a simple fix. $420 later I had a new bushing, bearing, sleeve, etc. The machine was still making noises even louder and my repairman came back, this time to the tune of $180. So far weve spent $600 on a washer that we gave a little over $800 for. Now I have a UL code showing up when my load is almost completely done and guess what? My repairman says he has yet another part that should take care of the noise but he wasnt so sure about the panel. He may have to do a little research on that. I think all I have is a repairman that is a parts replacer so we were forced to purchase a new washer yesterday and my Cabrio is sitting in my garage. If someone needs a boat anchor just please contact us. I wrote a letter to the corporate office of Whirlpool before I even knew that so many consumers were having problems. Two repairmen told me that the Cabrios were junk. Most of them belonged in the landfill. Whirlpool customer service called me and offered me a discount coupon on a new washer. I told them that I didnt think I needed another piece of crap. I also questioned them as to why they could foist these crappy machines off on the American public. They had no apologies whatsoever. While researching what brand washing machine to invest in, I realized that there were numerous complaints regarding the Whirlpool Cabrio. With as many consumers who have been taken advantage of with this awful product, why cant someone do something?

My very expensive Whirlpool refrigerator thats three and a half years old broke down before Thanksgiving 2020. I am not able to get parts until after May 18th 2021. After calling numerous times and spending lots of time on hold I was told February 11th by Whirlpool that they had the parts in stock and they gave me a price for each part. Then they connected me to the parts department where they told me they dont have two of the 4 parts that I need. The price that they gave me for the same parts with a lot higher than what they told me at whirlpool. Whirlpool customer service was terrible its as if they dont give a damn. They just dont care.I cant believe its going to be 7 to 8 months to get parts for a three and a half year old refrigerator. I have fallen down my basement steps where I have a small very very old refrigerator twice carrying food up and down. Spreading mustard and sour cream all over my carpet my stairs my walls. Not to mention the fact that I have bruises all over my body. If I were you I would not buy a whirlpool. Its going to cost over $600 for the parts replacements that is if I can ever get them. Im going to have to break down and buy another refrigerator. Remember Whirlpool customer service is terrible and you can just forget about getting the parts.

I originally brought this to the attention of Whirlpool on February 27, 2014, and they chose to ignore the matter I raised. I am appalled at their customer service, but then again, customer service has been dead in America for decades now. I purchased a KitchenaAid (Architect Series II, Model KERS807SSS02, Ser. XW4704146) oven in 2009, which included a 5-year extended warranty. The first time I had to use my extended warranty was the first time a pot overboiled and thus overflowed covering the top of my range. Since then, Ive had to have my oven serviced two other times, but resulting from a pot which overflowed on the range.The controls are located in the front, directly below the stove top. There is most definitively a flaw in the design of the model I purchased. It seems quite obvious to me that the design should have included protection from moisture reaching the controls. It is very common for pots to overboil, from time to time, and thus overflow, but this should not cause the controls to malfunction due to seepage. Had I purchased the model that had controls behind the range and controls above the cooking surface, moisture would never reach the controls when a pot overflows. It should not cost hundreds of dollars each time a pot overflows on a range. Had I known that the oven model I purchased had a design flaw that allows moisture to reach the computer controls of the oven, I would have purchased the oven with the controls above the cooking surface.I invested over $2K on this oven because having owned KitchenAid appliances in the past, the KitchenAid brand had historically proven reliable. KitchenAid (or now Whirlpool) can no longer take pride in the quality of their products, most likely relative to the loss of manufacturing jobs in the U.S. Whirlpool ignored me the first time I contacted them on this matter and most recently today when I was told that it was a use matter. Apparently they believe that an overflowed pot is not a common occurrence on a range. I wrote directly to Jeff Fettig, CEO of Whirlpool and he has chosen to ignore me.

I purchased a Whirlpool gas top range from Lowes in Somerset Ky September 2013. Model number WFG524SLAB1. The surface is showing bubbles. I contacted Whirlpool and they gave some kind of story. In other words I am stuck with it. Still under warranty but they wont send someone out to look at it. Lowes told us that it could be a paint defect when it was made. If the top starts peeling, it will be a real mess. I have never used anything abrasive on the stove top. As of right now I am not happy with Whirlpool at all and if they dont do something about this, I will never buy another one of their appliances.

Cabrio - In Dec 2013: Ran the Clean washer cycle and it would not cut off. I had to shut off manually. Called the company and they sent a technician, who said he fixed it and that everything was good. Fast forward to Feb 2015: Tried cleaning the washer again. When I left the house there were 10 minutes left in the cycle. When I arrived home 7 hrs later, the washer was still running and my hot water heater had cut off. I had to reset via the circuit breaker. This will be my last Whirlpool appliance for a long while.

Our home is only 8 years old. Our neighbors and double ovens have all gone out! I mean it just quit working and the parts and repairs are crazy expensive! We have already spent $400 on a control board and now we need a control panel which is another $300! Its ridiculous spending $700 on repair of an oven that should have lasted a lot longer! Another thing is that our ovens are white and now the panels only come in black! I will never ever buy Whirlpool appliances again and I am spreading the word to everyone I know!

I bought the W04H02 SKU Number 13219771. I decided to wait to write this review until Trail Appliances hauled away this piece of junk, which was this morning. I bought this fridge July 2013. In June 2015 the freezer first konked out, so I started using my deep freezer. Then by October the fridge went. I called in my repair guy, who told me he sees this all the time with this fridge and carries many motors for these garbage fridges in his vehicle at all times. So $375.00 later it worked for about 3 1/2 months. Just long enough until the warranty again ran out. At this time I started to read the reviews about Whirlpool, and I was so mad at myself for not reading the reviews first. All I can say is I would never ever recommend this product. I am glad to see this junk out of my home. I never wasted TIME CONTACTING WHIRLPOOL, AS BY THE REVIEWS I READ, THEY DONT STAND BEHIND THEIR PRODUCTS. THEY ARENT WORTH THE TIME.

We recently purchased a refrigerator from a reputable local appliance store after months of shopping and comparing and research. As an opinion, Whirlpool seemed to set the standard for a quality appliance. Unfortunately, we failed miserably by buying this side-by-side fridge. Two unsolvable problems. First, the cold side door is extremely difficult to open. Ive tried ALL gasket lube methods and failed. Second, the stainless steel used on the front of the machine is obviously low grade that accepts magnets and is almost impossible to clean weekly without streaking. They were kind enough to provide us with their special cleaner {free} but it takes about an hour and a half to use for moderate success.The lady on the help desk listened but seemed rather cold and uninterested in the problems. At this point, we would be willing to pay the extra and go to a Kitchen Aid instead. Our advise is beware of these types of issues and get some kind of guarantee from your store when buying a WHIRLPOOL refrigerator. This is simply terrible.

Purchased both Cabrio washer (wtw6200sw2) & dyer brand new in 2007 for $1200. Within 4 years the motherboard went out. Whirlpool didnt want to fix it. They said it was past warranty. After many complaints to corporate, they sent someone out to repair it for $496 (they paid). Repairman said these models had motherboards from Japan & Whirlpool was aware of the many issues, but wouldnt do a recall. 2009, the springs went out, 2011 F codes began to appear. Clothes dont get clean; not enough water. 2014 & 2015 DU & DL codes appear. Now I need a new Lid latch assembly. These washing machines are not worth buying. Never again will I buy another Whirlpool!! My mom had an old Kenmore that lasted 20 years and only needed a replacement belt. No more fancy high end washers for me!

I have had my Whirlpool W10280546B HE washer for 1 1/2 years. For the last year, I have had constant problems with the washer leaving a large amount of residue (in spots) all over my laundry. I have always run my washer as instructed, and I only used HE detergent in the correct amount. This residue appears to be fine lint, but may be lint combined with detergent.I have used the washing machine cleaning tablets and powders, but this has not helped at all. No one seems to have ever heard of this problem. I have to clean off these spots which cover approximately 1/3 of each article with every washing. The dryer helps get some of it off, but not nearly all of it. Any suggestions besides buying another washer of another brand after only 1 1/2 years?!

We bought Whirlpool Frontloader Washing Machine not over 1 month ago and it started to malfunction showing Ed1 error on its display. We contacted the service center and it was taking too long to have a visit from a technician. Then the technician, who also installed the unit came and checked the unit. He called someone from corporate office or from support team to ask what is error code Ed1 and overheard over the phone that this is a known issue on the brand. The technician said it is possible that unit will be replaced or only the motor. I contacted the brand support thru Messenger and requested to have the unit replaced, because again, the unit is not over 1mo old.I was advised it is not possible as replacement of unit is only applicable when the issue happened within seven days of delivery. STUPID ISNT? Policy is something unworthy for a product that is over 30k. And again, unit started to malfunction not over a month after it was first used. I would say we pretty much took care of the unit, we only use it twice a week. Placed it where it was perfect to put. Followed every advice given to us by the technician who installed it but still, it malfunctioned a few weeks after we started to use it. I am ashamed of the brand itself, we should have chosen Panasonic or Samsung instead not a dumb brand like Whirlpool. I certainly do not recommend the brand for a washing machine unit. Frontloader is a crap.

I purchased Whirlpool Microwave/Convection Oven a little over a year ago. It needed repair four times and the latest repair debacle appears that it will take ~5-6 weeks to get it repaired if the part that comes in works. The microwave model number is GMH6185XVS1. I will never buy another Whirlpool appliance. I spoke with Whirlpool (not the extended warranty company to which I was referred), and they refused to help, period.The extended warranty company (although very nice), werent much help and will continue to attempt repairs until the price of the repair(s) exceeds the value of the microwave no matter how it inconveniences my household.

We have had this Refrigerator for 3 years in December of 2016. To date, we have had to call a repairman (in February 2016) to replace a circuit board on the back of the refrigerator. That took 4 days, as the company sent the repairman the wrong parts. After that $300 repair, which we got at a discount because, the repairman felt bad that the company actually sent the wrong part. Since then we have taken it apart ourselves for several reasons: The freezer compartment filled up with a layer of ice and started to melt all over the floor, shutting the refrigerator off, (which then forced us to borrow coolers to store the food) until it could be repaired. The drain tube was completely blocked and in order to fix this problem, the tube had to be taken out and modified, according to the Internet videos we then watched. In order to make all of these repairs, the door, the shelves and baskets have to be removed, which is definitely not an easy thing to do at all.There are so many hidden screws and tabs that must be manipulated with tools and by hand to remove the doors, shelves and trays just to get where you need to be in order to make these repairs. With each repair, the ice maker and water dispenser started having problems, because, each time the refrigerator has to be shut down, it takes hours for it to re-set itself. Luckily my husband had the tools necessary, with videos on the Internet to assist us. However, once the first problem started, it was a snowball effect, literally. ALL of these problems have been identified by the manufacturer, however, nothing has been done. VERY POOR DESIGN!

I saw on the Today Show that my Whirlpool Duet washer, purchased in 2008 was a mold-producing nightmare. We are now part of a class action lawsuit that seeks redress. When I called Whirlpool Customer Service, I was fed the company line that the problem is that we dont clean the machine regularly. The instructions call for monthly maintenance, but the rep said we need to wipe it dry after each use. This is an original defect in the machine that Whirlpool refuses to own up to. We had been Whirlpool devotees for years but will never purchase another Whirlpool product.

We have had the same problem with the magnetron in our Whirlpool Microwave Hood Combination. Replaced this part in Dec. 2012 after warranty expired. Cost of repair was nearly cost of microwave. Magnetron went out a second time this week. When I called Whirlpool customer service, the management rep was very hard line about the warranty on the unit and parts. Very clear this company has a product reliability issue and does not want to keep its customers. I dont plan to purchase another Whirlpool product ever. What a frustrating disappointment!

I have had my Whirlpool Cabrio washing machine for 14 years. I feel this is very dependable and cleans my clothes efficiently. I love the large stainless steel tub without the agitator. I can fit a king size comforter in the machine. The only problem I had with it was to clean the lint out which I would assume would have to be done to any machine that is used every other day for 14 years. Love it!

I purchased this washer and at the same time had gotten a puppy, I only mention the puppy because she is the one who kept getting blamed for what was happening to my clothes. I NEVER thought that it was my washing machine that was ruining my clothing, until I finally opened the door one day and my shirt was hanging from the top of the washer opening, and suddenly it all made sense! I kept thinking that the puppy was chewing my clothes but it is actually the washer that is sucking my clothing into the opening of the washer and when it gets stuck and the rest of the garment keeps spinning, it creates a burn in the clothing. I found out the hard way that Whirlpool will just blame the consumer for not knowing how to properly follow washing instructions, or their instructions, and will not take any sort of responsibility for it being the washer itself! I wrote to them after my father passed away and I washed his sweater in the washer and it got caught in the washer and ruined it. They blamed me for it and basically said I did not follow the proper washing instructions. I have been washing clothes for over 20 years and I know how to do laundry. I have read every inch of the owners manual and NOTHING tells you that during the wash cycle, your clothes may become sucked into the opening and ruined! So I went online to see if this was happening to anyone else and I was amazed at how many people this is actually happening to! There should have been a recall on these washers and I am amazed there has not been some sort of class action lawsuit.

8 cu. ft. Cabrio® High-Efficiency Top Load Washer with Steam - I bought a new washer. It did a poor job rinsing and spinning dry. Whirlpool customer threatened me that a service charge may be charge if the repairman came out and found nothing wrong. After calling three times I ordered a repairman out. The repairman explained that only way to prevent soap residue on your clean clothes is to use the bulky and deep water options. Also dont use high spin or when it spins your clothes dry, it leaves them in a tangled mess that requires ironing to remove the wrinkles. This washer is not ready for the market and must be removed until they can perfect it. It cost me $200 to return and exchange this model for the Front Load Duet, which works excellent. Whirlpool should be ashamed to have ever put this machine on the market.

I thought the Calypso had issues until I got the Cabrio. It does not use enough water to get the clothes clean, it leaves them in a tangled mess, and no matter how carefully I load the clothes it is always off-balance making enough noise to wake the dead!

Love my Whirlpool stove and I just bought a Whirlpool French door fridge. I also have a Whirlpool washer and dryer and I am very happy with the way they work and look. I replaced my Tappan stove that I had for quite a while and it was a good stove but I am very happy with my Whirlpool stove, it not only works great but it looks great.

I bought a whirlpool 40g gas heater with the Honeywell gas valve. In 5 years Ive had to replace the valve two times. Thankfully the valve was under warranty both times. Our old water heater was Twentynine years old before it started to leak, this new electrical diagnostic high tech gas valve keeps breaking showing a overheated error and the only way to fix it is a new valve that only Honeywell sells thats well over 100$. Talk about a scam!!

Never ever plan to buy a Whirlpool product. I took the washing machine in December 2008. System was not got at first time also. I called service center, and he came and asked to put this and that. Again, it got a problem. This time, he told me to change powder. I was shocked how a powder became a problem for its failure in washing clothes. Next, he told me to put a stand. After a long interval of 6 to 7 months, I got fed up and called him again. He told me it was not in the warranty. Its the worst service. Zero percent satisfaction Hats off to Whirlpool service. Please, friends, never buy cheap Whirlpool products.

Model # WFG510S0AS1 SER #R30850040. Oven was installed NEW in the home I purchased in July of 2013. I used the cleaning feature on it in Nov 2014. I am amazed that it did not start a fire. Please see pictures attached. The whole control panel melted. This makes the oven unusable and extremely dangerous. I will need to replace the whole control panel. I followed the instructions completely in the manual provided for the cleaning cycle. It says in the manual to only clean the over this way as using easy off or any other cleaner will damage the inner surfaces.Whirlpool claims they have no knowledge of this problem but there are numerous complaints on their site about it as well as other internet sites complaining about the melting of the control panel. I need to know how to fix this problem and dont believe I should have to pay for something that is obviously a flaw in the materials used. It is extremely dangerous. Since these pieces of Whirlpool equipment were installed by the broker that originally purchased the home, I have no record of purchase. I can try and contact him and see if he has anything but kind of doubt he has receipts now.

From the day I bought the refrigerator the icemaker has not worked. I have had a estimation of service calls (8) and nobody seems to be able to fix it. Whirlpool mailed me a new icemaker and still the exact problem; water and ice works but the unit still will not cube or crush ice; which by the way is the reason I bought a new refrigerator. My thoughts are I bought a lemon and the entire fridge needs to be replaced.

I purchased a Whirlpool microwave in November 2011 from BestBuy.com. The microwaves handle is coming apart. Best Buy wont honor because I didnt purchase the Geek policy. One year warranty is still valid, but Whirlpool claims that a door handle falling apart is cosmetic. Serial number TR14430004, model number MH3205XVS-2.

My Gold Series Whirlpool Electric Range is 3 years old. The main board for driving the burners, oven, etc burned up which caused my oven to go from the 200 degree setting to 450 in about 3 minutes burning everything that was in the oven. They want $400.00 + installation to replace it and that is if one can be found to actually install. The stove was purchased for $850.00 because of the Brand and now they want half that value to replace a board that will likely fry again in a year or two. I find there is no value for money and will not ever buy a Whirlpool brand again.

The refrigerator fits perfect in my space, keeps frozen (ice cream is creamy not a frozen block ) and cooled foods well. I love the glass shelves. I purchased 2 more bins for the refrigerator door, now I can get all my spices and condiments on the door as well as lots of other things. The freezer has racks instead of glass shelves. The top shelf is adjustable, that is nice in order to use more space. I love the ice and water on the outside of the door.

The exterior look of the refrigerator (WRX735SDBM00) is impressive and the stainless steel does not show finger prints easily. It has two french doors on top, a middle drawer, and the freezer drawer on the bottom. The interior is 25 cf, but there isnt much space, even with reconfiguring the shelves, and the crisper/meat drawers are so small, that a large bell pepper wont fit. When one French door is closed it pops open the other door, which then does not close back tightly. Although there is an alarm system to warn a door is open, it only works if the doors are open and not just cracked. We have to constantly push on both doors to be sure they are closed tightly, even after washing down the gasket to get a better seal.

Not cooling properly on wpf560smywc2 French door - Milk only last 3 days. Temp wont stay consistent. 4 times out and say normal. Ice is forming on fan in freezer and back wall causing no flow in refrigerator but freezer cooling. Only 3 months old. Lowes Service Advantage (Extended Warranty) nor Whirlpool will replace or do anything about it. Was told 3 times out and replacement then today they sent me email with their policy or 3 times out with a repair (Parts must be changed) wait 30 days then another repair etc. then on 4th repair will replace. Lied to buy sales and called liar by repair guy when he told Whirlpool nothing wrong. I just wanted a new one cause I didnt like features. Lowes has a return policy which has in fine print only 30 days for refrigerator so they wont help. Was told I have to do a food loss claim and they would email form. Still hasnt happen. Lied to and get a replacement or repair and cant afford another.

Having spent over RS 40000 on a so-called quality product one does not expect to spend nearly 20000 within the first two years of the purchase. 1. As soon as the warranty got over the PCB (costing 3000) broke down. 2. This replacement had a 3 MONTH warranty. Exactly after 9 months again the PCB breaks down along with leakage of gas. The service team asks us to buy a stabilizer to ensure that no such issues occur as they attribute these breakdowns to voltage fluctuations which are not of any precedence in Delhi. Also the product I am using was sold to me as a stabilizer-free working. 3. I made the suggested investments 4 months later the fan and motor of the freezer stop working. Imagine so much repair work on a new equipment. I have been writing to them yet all that they say in response is we are looking into the matter. NO ONE SHOULD BUY WHIRLPOOL REFRIGERATORS.