I have a gas range Model WFG540HOESO Airlift self clean. When anyone reaches across or leans against the range, ever so slightly, the knobs turn and gas is released. It is EXTREMELY dangerous. The Airlift self clean has never worked. When the repairman contacted the technicians at Whirlpool, they told him that there was nothing they could do. In other words, I am stuck with an oven that will not self clean. The water in the bottom does not even come to a boil.

Have had no problems and we have both washer and dryer Duet and love them. We need to make sure we keep the washer door slightly open to avoid mold. The dryer lint filter is a little difficult to vacuum out.

Just bought two new Whirlpool water heaters, $469 each. Not impressed. One of the MANY issues: water leaking from the top. Reason: before installing, if you look inside female threads, you may see a rubber gasket (heat loss valve). One of the two heaters of mine was missing one. This showed me what the quality of the joint was like under the gasket. I temporarily removed the other three (two heaters) to confirm what I saw: At the backside of the threads there should be a clean flat landing from which to the male nipple should tighten against (washer in-between). Instead, there is a disaster of a flimsey lip (washer-like) which is torn up and not anything close to flush. Bad Whirlpool! Bad quality control!

Hot water heater model #0833T402747 purchased late 2008 - Several service calls had to be made to a plumber, due to this unit not working. The door assembly was shipped to me by Whirlpool. I had to pay again for the plumber to install this part. Hes been here 3-4 times since I bought the unit. Last Wednesday, May 2, 2012, no hot water again. The same plumber came out and said the door assembly had again gone bad. Whirlpool was contacted on Thursday morning and would not agree to do anything. They were given my plumbers name and number and I never heard back from them. I contacted Lowes in Acworth, GA and they agreed to replace the hot water heater. So now Im forced to pay for another install. I requested that Whirlpool pay this expense, and their representative, **, said no. I intend to sue them for all monies spent on this lemon and due to this lemon, I will never buy another Whirlpool product of any kind. I have told family and friends and theyve agreed that due to the bad product and worse customer service, they will also stay away from purchasing anything made by this company. Whirlpool certainly wont be hurt by me and me alone. But Ill make sure that anyone I run into at Lowes or anywhere else is even looking at a Whirlpool product will get an earful from me. This is the type of customer service that consumers dont have to put up with anymore. There are many resources on the internet to get the word out and I intend to spend a great deal of my time doing just that.

Purchased a home recently that had a Whirlpool dishwasher installed within it. Havent lived here for more than 2 weeks. Go to use the dishwasher a week ago and the dishwasher wont turn on. Its brand new! We tried resetting the breaker and all the tricks on the website page. So we called Whirlpool to have them send someone out and diagnose the problem... a week later. The appliance repair man comes out and says its not receiving the proper voltage for the dishwasher to run. So I contact the electric company that installed the electric wires within the home and they came out the next day to check their work. The electrician found that there was the proper voltage coming into the lines for the dishwasher to run and in fact it is the dishwasher. So at this point Im back to square one and called Whirlpool again. At this point, I just wanted them to replace the dishwasher with a new one (same model, no upgrade) since it hasnt even been 30 days of owning the thing and its already having issues. I havent even used it once. I didnt think I was crazy for asking for a new one. Especially when the problem seems to be electrically related. They tell me another person has to come back out and deem the product unrepairable for them to exchange the product for a new one. They tell me its going to be yet again another week for someone to come deem it repairable or not. But wait heres a 75 dollar Visa gift card for your inconvenience. How about you spend the 75 dollars on hiring a technician to come fix it today? Had a similar problem with a LG appliance and they sent me a new one with no hassle without even sending a tech out to see if it was repairable or not. Buyers beware! Dont waste your money on Whirlpool. Clearly they do not care about their customers. They would rather spend more money in technician fees than to just admit their product isnt functioning correctly and replace it.

I bought a washer and dryer a couple months ago. The washer has been completely replaced already. It is a piece of garbage. I have to wash my laundry four times and still my clothes are not coming out clean. I have three small children and it is just a pain to always be washing their clothes. Things as simple as orange juice not coming out of a shirt even using bleach. It was sold to me with high efficiency and great water consumption but of course it is, it doesnt use any water to wash the clothes. I had a tech come out to look at it and even they said its had so many complaints about how it washes. She said that the wash machine is the worst out there and I totally agree. If you cant wash baby clothes and get puke out of a bed sheet then I could just imagine grass stains. Wash machines don’t last forever but I can promise you I will never purchase another in my life. Best part of it is when whirlpool was approached, did absolutely nothing about. Basically said, “Have a good day, thats what you bought, thats what you get.” Considering its still under a year warranty. Tell me I will never buy a whirlpool again and I will never recommend one to anyone who asks. The customer service and product dont stand anything against other manufactures. I learned my lesson the hard way but Ive opened my eyes. Never purchase a top loader. Word of mouth travels fast. I know my complaint probably means ** to whirlpool but for what its worth, Ill be spreading the word around.

We have had the Whirlpool Cabrio washer and dryer for 4 years now. Let me start off by saying the first 6 months was wonderful. Then after that, the machines were breaking down every time we turned around at the worst times. With 2 adults and 4 children, you see my point. We have had a repairman at our house to fix these machines 6 times and now, we are getting a code on our washer that is F1. Looking up codes online shows to be the computer system of the machine and a $400-$600 repair, might I add. Please save your money and buy a better and more dependable set than Whirlpool. Washers and dryers used to last 20-25 years, or so my parents and grandparents did. All of the manufacturers are building cheap junk so we can buy them more often.

I purchased this Whirlpool washing machine in July 2009. The repairman just gave us a $1400 estimate for repairs due to failure of bearings. This is an energy efficient, expensive appliance that we expected to last for years and we feel that 2 1/2 years of service is unacceptable. We did not purchase an extended warranty and Whirlpool said they would help with the cost of parts - not labor. We cannot afford to repair a lemon and so purchased an LG front-loading washing machine today. Hopefully we will have a better experience with LG as we will not be purchasing any more Whirlpool appliances ever.

Whirlpool refrigerator WRT1LTZW00 - Bought refrigerator, works ok but makes noises that will wake you up in any room of the house. Had Whirlpool products for over 40 years. Why would someone make something that noises. Service came, said they all like that with new gas, cant do anything. Find hard to believe this was consumer tested. 6 weeks old, cant sleep with noise. Has anyone had same problem?

My wife and I tried to buy a Whirlpool refrigerator and when dealing with their customer it seemed like the left hand didnt know what the right hand was doing. My wife and I were really disappointed being that these refrigerators are supposedly made in America; thats why we wanted a Whirlpool; but we would never buy a Whirlpool now because of the way we were treated also. Sincerely unhappy with our experience!

This dishwasher is so far advanced from what came with our new home 18 years ago. It is absolutely the quietest machine. You have to look at the light display to know if it is even running. Its a well thought out unit with the exception of the silverware accommodation. They used a flat low-profile basket attached to the inside of the door. Not accommodating enough space wise. Solved by augmenting the more stars compartmentalized basket that came with the old dishwasher. Would recommend and purchase again in a heartbeat!

Ive always had a Whirlpool washing machine and it has been extremely dependable. I have not had any problems with my Whirlpool washer. A Whirlpool has came a long ways with their pricing. It was very affordable for somebody like me and I cant afford a lot but I could afford this. I was very pleased with my purchase and with the product. They havent let me down so far.

After 32 years of marriage and nothing but Whirlpool (because my mother swore by Whirlpool), that is all we have used. I am so disappointed in the Cabrio washer/dryer set we purchased at Lowes. After 18 months, the dryer just quit. The best part is, we hang clothes out most of the time. It was used one winter, $1400 wasted. We put a cheap Admiral in our second home and spent $500 total and they work fine. I will never ever purchase Whirlpool anything or recommend to anyone. Again, you lost a family tradition.

Bought fridge in 2010, I am about to replace the icemaker for the 2nd time at a cost of over $300 each time by a Whirlpool authorized repair tech. No kids in the house and very limited use of icemaker. Motor keeps burning out because of the design flaw per the tech. Very poor design for a $1,500 fridge. Due to these issues I do not intend on purchasing Whirlpool products in the future.

Bought on 9/11/2014 and installed by Lowes installers on the 15th. It quit heating two days later. Called Lowes and they said I would have to call Whirlpool. I did. WP had me metering with a multi-meter until found OTC button was tripped. Then they suggested I troubleshoot the elements and sent me a video. I called Lowes and they said they would replace. Later they called back and said WP would not give them a RA number and for me to call them. I did and the rep after much arguing directed me to call their factory authorized service, A & E. I did and they said it would be 33 days before they could come out. I hung up and called Lowes who called back later and wanted me to call WP again. This time they said they did not have a repair service close enough to come, but I could try buying the lower heating element and replacing it to see if that worked. I said no, the heater was brand new and they needed to fix it. Their next solution was have me contact a local plumber and arrange to troubleshoot, me pay the plumber and then send them the bill. They would reimburse me up to $100.00. Not acceptable and now the button has to be reset every few hours and the water gets scalding hot while it is heating. I called Lowes and they said they would get back to me, but I have little hope of a resolution. Product number is ** SN is ** Model is E2F50HD045V. Bought at Lowes, Lindale, TX.

We bought a Whirlpool Cabrio 2 years ago and they are an absolute piece of junk!!! There is only 2 people in our family so its not like we are washing big loads. It doesnt get my clothes clean and the clothes stink. I have followed the directions on cleaning the washer and it does not good. Now my clothes are soaking wet at the end of the cycle so I have to put it on drain and spin just to get most (not all) the water out of them. And when I take my clothes out, they are just as dirty as when I put them in. Called a technician and its going to cost over $400.00 to fix. This is nothing short of robbery!!!! This machine is a piece of junk. I read over 500 reviews on this washer and they all had problems that cost as almost as much as the washer cost to repair. There really needs to be a recall or a class action lawsuit against Whirlpool.

My Whirlpool Cabrio washer (WTW6600SG2) is a money pit! After reading all of the nightmare stories concerning this washer one would think Whirlpool would offer a recall and try to correct their wrong doing. Do not buy a Whirlpool Cabrio. It was the worst decision I have ever made! Whirlpool does not stand behind their products. I cant believe they can get away with treating their customers so unfairly, taking their hard earned money for crap like this, then not offering to help after so many have had issues. The Cabrio is loud, doesnt get clothes clean, and is always flashing UL for uneven load (when it works at all). My local repairman has made many trips to fix my problem Cabrio. This time he is at a loss. Ill be buying a new washer and it will not be made by Whirlpool! Please, if you are reading this be forewarned!! You will regret your purchase if you buy a Whirlpool Cabrio.

I just bought my washer 3 or 4 months ago. It is the worst washer I have ever owned. Anyone that has ever done laundry knows you need water to wash clothes. My clothes are not clean and my whites are very dingy. I use the same soap (Tide) and the same bleach (Clorox) that I have used for years. If I can find someone dumb enough to buy it I will sell it and get a good one. I would rather go back to the old wringer washers than this one.

(Model WTW5640XW3) Whirlpool Cabrio worked Good for 11 months (just after warranty Expired). Replaced capacitor would not spin, hums loudly and smells like burning Plastic. Then about 2 months after that Lid locked, failed, replaced. 7 months then Actuator failed and now looks like the Main board give up. I dont know where The original parts are made but they are Cheap junk. New technology is crap for Washing machines, gears transmission and Solenoids last a lot longer plus they clean your clothes. And belts and solenoids.

Lasted a whole two years, no warranty from Whirlpool. No biggie until I read countless complaints that Whirlpool OTR microwaves dont last. When I was young we had a Whirlpool microwave oven that lasted 15 years. Apparently this one (made in China) is the direction Whirlpool has chosen to take, cheaper products for higher profits.

Whirlpool model WRV986FDEM Purchased May 31, 2017 from Lowes. Cost: 2,638.10 including 229.97 for the 5 year extended warranty. We’ve experienced four failures in the nearly four years we’ve owned this lemon. The first failure occurred within the one year manufacturer’s warranty period. The three failures since then have been fairly close together. Control boards and mechanical parts have been replaced. We are now waiting for a “made to order” part, with no scheduled delivery date. When I pressed Lowe’s on the reliability of this fridge, I was told that if four failures occur during the extended warranty period, they would give us a replacement. Considering the delays in repairs and frequency of failures, this is unacceptable. Do Lowes and Whirlpool expect their customers to just suck it up and do without a refrigerator for months while we wait? The warranty is worthless without prompt problem resolution. Whatever happened to real customer service?

This has been the worst purchase I have ever made! Within 2 months of it going out of its one year warranty I called (Lowes) to have it repaired. Spent $300 on the first repair to get rid of the jet engine sound AND the oil splatter all over the floor then within one month from that repair it has a F code error and wont finish washing a load. It just stops. I have tried everything from unplugging it to restarting and it just wont work. Now have to wait 1 week for the repairman to come back out (hopefully that warranty of 90 days will be helpful). Do Not Buy this machine!!!

We purchased a WHIRLPOOL appliance 1.5 yrs ago. Approximately 7 months after purchase, the refrigerator began making a high pitch whining noise. We contacted WHIRLPOOL who sent out a mechanic who really appeared to not know much about the product. He made some sort of bogus repair and call himself fixing the problem. Well, a few months later, same problem... same noise. Now we are asking WHIRLPOOL to help and theyve done NOTHING. Now we are fighting between LOWES and WHIRLPOOL to fix our problem. We spent $2,000 on this appliance and I feel like we purchased a LEMON refrigerator. Did I mention the ICE MAKER seems to be the keen problem. I will NEVER purchase another WHIRLPOOL appliance. Im SO done!!!

I did not purchase it, the stove came with the house. I like the flat-top... easy to clean. I dont like that any little spill causes a stain that has to be cleaned. I didnt shop for this one. Although I would have this as an option if I was shopping. Low quality would be a problem. I want my stove to last a very long time. But, I dont want to pay a lot of money for it. I have a Whirlpool, glass top (smooth top) built in stove. I dont know the model. It has 4 electric burners, of 2 sizes. It has dials to control the heat amount.

The double oven is the best! Doesn’t heat up the house like the older stoves! Very easy to clean. The range is all one level, so it is at easy to set your pit anywhere. Also the middle burner is amazing for a griddle!!

Our experience with the Whirlpool Duet Steam washer is the same. Weve had ours about 2 years and have replaced a sensor and the rubber boot (both in the first year) and now we too have had the bearings go out. Weve called Nebraska Furniture Mart and Whirlpool. No one really cares. Its unbelievable that $1800 is down the drain and its acceptable! What are the steps for a class action lawsuit? How about getting some social media involved to get Whirlpools attention? It worked with Netflix and Bank of America. They had to finally listen to the public. So frustrated!

I bought this fridge 2 years ago. I had multiple repairs already. Now the side panel makes noise when you shut the door. Repairman told me it is the foam separating from the side panel. There is nothing that can be done. I also have extended warranty.

I’ve had this washer since October 2018. Worst purchase ever. It does not clean the clothes nor does it put enough water in it. I’ve tried the deep water option too and it’s for sure still not enough. I don’t understand how they even thought that this was perfectly fine to sell. If I could’ve taken it back a month after having it, I for sure would. And no one will buy it because they’ve read reviews of how it’s terrible. I wasted $900 on this washer. I have the dryer also which works amazing. The washer just sucks something terrible. My husbands military uniforms always look dirty and a lot of the clothes aren’t ever wet. I’ve finally seen a picture of how you’re supposed to have clothes in there. Why in the world would you only allow barely a layer of clothes at the very bottom to be cleaned by the agitator? Why would you have this huge drum only to put not even a load in there? This was such a waste Whirlpool and I’m glad I’m not the only person who has the same issue. I will never purchase another Whirlpool washer, it’s upsetting I can’t currently get rid of this crap washer I have now.

10 years, no problems with our 25 cubic foot french door Whirlpool refrigerator. Ice maker is a solid performer, with nary an issue. Temperature controls work flawlessly. The black frame looks great in our kitchen with espresso color cabinets.

Do not buy Whirlpool or Maytag appliances. They do not stand by their products. We have purchased 2 washing machines in the past 8 years. Both of them quit or broke almost as fast as we got them. The customer service agents were pleasant, but they would not help us at all. The machine we purchased has a design flaw that they will not acknowledge. They have been contacted by us several times and cant fix the problem. They need to correct a design flaw that is in all their machines.All of our clothes get encircled around the agitator and the machine gets off balance. We have to untangle our clothes from the agitator and pull them apart by hand. They make bad products, including a Whirlpool refrigerator that broke within a month of us buying it. They care about selling these crappy machines. Buy a GE, Bosch or LG. You will get a machine that works properly as soon as you hook it up. We have had their representative out several times to our house and they could not repair it. The repair techs have told us that Maytag and Whirlpool clothes washers are no good.

Nice looking, prices very fair for quality product. Options are always good. My mom used Whirlpool. That thing that goes in the middle of the old time washer is now gone. That thing would rip or stretch out clothing bras. Anything that was nice it would make it look horrible. Ive had my washer and dryer for 6 years and they still work like new. When shopping for a washer and dryer I do look for capacity, energy efficient and the brand. I prefer to stick to the old school brands just like my mother did. I must admit that I do love the fact that it is an HD high efficiency washer. The deal-breaker would be a low quality construction made a washer or dryer nobody needs to have problems with it. If youre spending that type of money you need to get good quality items.I love my washer and dryer. Theyre both and white color. Its a Whirlpool Cabrio with HD High efficient load energy saver and H2 wash system. The washer has a lid with a see-through glass which I love. My dryer is also a Whirlpool Cabrio steam with a resource saver that gives me a lot of different options as far as my clothing is concerned on how I need it dry.

I purchased a new gas water heater and had it installed by a plumber. It worked for 3 weeks then we lost hot water. I called the 877 number and got shoveled around to 3 or 4 people. I got hung up on twice then spent 45 minutes repeating all the instructions that are on the tank to relight the pilot light. They agreed to send a new valve. The first time, I never received the valve (after 10 days) and had to call back. The second time I called in, I spent 20 minutes trying to get another valve sent. The valve I, finally, received had plumbers dope on the back and clearly was previously used. Had the original plumber replace the faulty valve? And lo and behold, the second valve didnt work either. I have no idea why a gas water heater would have any issues after 3 weeks. I bought it brand new from Lowe’s. It is obvious that Whirlpool makes shoddy products. They have very poor customer service and care little for the customers’ time either in correcting the problem or being without hot water. I have spent over 2 hours with Whirlpool. Only to 3 weeks after the initial call, I still do not have hot water from a heater that is less than 2 months old! I called them on the issue of the second valve not working and they put me on hold (after 10 minutes the line went dead and I was disconnected) despite the fact I asked them not to do that!

I purchased a gold series whirlpool dishwasher on July 20th 2014. Today is Dec 31, 2015, for the past month I have been troubleshooting my dishwasher by myself. Because I had a maintenance man here already since I bought the dishwasher and due to Christmas cannot afford another 250 for another visit. Every time I try to wash, at end of any cycle I have tried using, I open the door and find the cascade soap sitting on the bottom of the tub, the dishes still wet and dirty. So I take them all out and hand wash them, I should not have to do this on a washer that is a little over one year old considering the price tag that I paid for it. I am not young anymore and if I wanted to hand wash dishes, I could have used that money for a nice vacation somewhere.The washer stops, start button blinking, I open it up, check it out to make sure everything looks ok, close it and restart again. It sounds like it is working, so I go about my business and come back an hour later to find the same issue. Dishes will not wash soap on the bottom of the tub again. This has been nothing but trouble since I purchased it. I have never had a problem with my old dishwasher until it got too old. On top of it all, I had to buy another clothes washer from the same manufacturer that now took over. This was only 5 years old and the motor burnt out. I had two maintenance men here from the Maytag/whirlpool company and they filled me in. So I had it hauled out of here and I bought an LG for another good price. It seems to me that it is all about money and they make nothing but crap. Now. I need to make another decision. About this POS dishwasher! What to do?

We bought all whirlpool appliances at our new home 4 months back. Our refrigerator has stopped working from the last month. We had 7 different service team people come in to check and they temporary resolve the issue (taking out a plastic piece from the top of the refrigerator, just re fixing the ice machine, or just walking out of our home doing nothing).Friday someone came and tried fixing it and took about 3 hours. The fridge completely Broke down after that in about 6 hours. Whirlpool customer care wants to send another technician in and want them to have them talk to their technician and maybe after that they can do something. This is the 8th time some technician will be coming home. And clearing these technicians curse whirlpool and dont call them. The customer team at whirlpool suck, there is no damn replacement or repair policy. All scheduling is after a week and whirlpool does not give a **. I really hope this company is sued for the emotional and mental stress and the harassment they cause to their customers. Very frustrated. Have no idea what to do.

The unit I live in is at **. They purchased it in Nov 2011. The washing machine worked for 2 months. Now, it has to be dismantled at my home and take a day off. I would like a replacement. The Dutchgate is still being developed. They purchased at least 60 at this point, there is no reason not to give me a new one instead of having two techs dismantle the machine in my new home for 4 hours and a day off of work. Model WFC7500VWl, serial CD13528709. Please try to assist me.

I purchased a replacement gas range (whirlpool) approximately 3 years ago. Its not the top of the line, no bells or whistles such as a self-cleaning oven or such. I did love the three huge grates on top, one which is interchangeable with a flat grill. If it only worked it would be a decent range. The center oblong burner struggled to ignite in full from the beginning. Often, I light the thing with a grill lighter. But the thing that pisses me off more than anything is the F2 error that appears 70% of the time on the control panel when I am preheating the freaking oven. I am NOT replacing the control panel on a $400.00 range. What I have discovered is I can hit off my power at the main, not once, but 2-3xs and reset or over ride the damn thing. I read this F2 code is a common occurrence so I got to thinking, why? My conclusion is the heat from the oven is vented up & directly on the control board panel. Really now, whos bright idea was it to expose a control board to repeated temps of 350+? Hate this appliance. Next range will NOT be a new one, Im looking to replace this junk with something mom or grandma had that lasted decades, not a couple years. Shame on you Whirlpool for producing such low quality, disposable products. By the way, I just went through this with a new fridge so theres much to be desired with new appliances. Theyre junk, designed to fail.

I purchased a Cabrio Washer and Dryer set last October from Sears. The washer had a damaged washer basket and then stopped working altogether. The service call to get the washer working again was a fiasco. The tech replaced a switch which failed in the first 5 minutes and had to be called back to replace that defective switch. We now have the same problem all over again and we are on our third service call and the warranty is expired. Whirlpool is useless and will probably be out of business if they continue as the middle man for Chinese manufactured garbage. I will never purchase another Whirlpool product again. Word of mouth can make or break a business, not advertising. This stuff is real junk and trash. Im sorry we bought it. Do not buy any Whirlpool products.

One year to the day after the warranty expired, the meat drawer in the refrigerator began filling with water. Two repairmen have been to my home and cannot repair it due to a design flaw. Also, I had to pay for a cracked bottom tray that happened during delivery which I didnt know occurred at the time. Whirlpool is now ignoring my phone calls and emails. We paid in excess of $800 last year. What am I going to do now? Buy another refrigerator and get rid of this one? I dont make that kind of money and I feel Whirlpool should stand behind their products. This model is not even on the recall list so that means to me that other consumers buying this model are getting ripped off also. The customer service people say sorry but wont budge on reimbursement. I was told they cannot honor my request. Whether this was under warranty or not, it still cannot be fixed according to the repair tech that was at my home. I need to find someone to help me before this lemon I bought decides to burst into flames. I want a replacement refrigerator, not this model of course, of equal value. I am not asking for the moon, just for something that works beyond one year. In this economy, we cant afford to buy a major appliance after one year. My car is still running and I bought that in 1985. Please find someone to help me. I thank you for your time.

We bought a new Whirlpool washer/dryer 6 months ago. Dryer is ok, seems to take a long time to dry. Washer is horrible. It constantly goes off balance and shakes all over the floor. Once opened, the clothing may be a little off, but not enough to cause such commotion. SO FRUSTRATING! If we could afford to replace these, they would be out on the curb today!

Got a Whirlpool hot water heater 5 years ago has 9 year warranty. The threads on the nipple are rusted out and it’s leaking. It has rusted out so badly that it’s leaking. They are refusing to replace it saying it’s a plumbing issue even though the nipples that they installed are what’s leaking.

My Whirlpool super capacity 465 started flaking out on the temperature and burned our dinner. I had a repairman over to repair which he did after about 3 hours of testing. Less than 6 months later it did the same thing. Overheating in the oven.

I purchased a front loader Whirlpool Cabrio washer/dryer in June of 2011. I was sold an extended warranty which ends June 30 of this year. I have made 4 calls to the Co which warranties the washer because it is making squeaking noises on the spin cycle. I was refused service because the customer service rep didnt “hear” anything. I finally had a local service Co check out the machine and was told the motor needs to be replaced and if under warranty I should demand it be replaced. I called again and still cannot get NSI to come out and see the problem.

I had my Whirlpool Gold refrigerator for two years. I observed water puddling out of the bottom of the freezer about every three days. I called Whirlpool to find out if there was a recall on my problem. There was none although refrigerator repair companies said there should be as Whirlpool has a defective part. That part is the drain for the freezer as it clogs up and does not allow water to drain and then refreezes. When the freezer automatically defrosts, some ice melts and as a result the water comes out of the bottom and puddles on the floor in front of the refrigerator. I recommend that people do not buy Whirlpool refrigerators unless you are willing to pay over $200 to replace the end of the drain line in about two years.

We purchased a Whirlpool water heater from Lowes in 2011. Everything was fine up until June 2015. We got the dreaded 4 flashes. We called for service to come out, that costed us around $300. December 23rd of 15 it goes out again. We called Whirlpool instead of a service company and the part was under warranty. We paid for overnight shipping but because of the holiday it was not guaranteed. We told them we are fine with Sat. delivery. In the meantime we had to cancel a holiday party scheduled at our house the 24th. We waited around all day Sat. for the part to show and nothing. We called Whirlpool to get the tracking number and we find out that the other service rep didnt mark our package for Sat. delivery. I am very close to just buying a new heater. I am trying to tell everyone I can about how horrible Whirlpool is. I feel sorry for any suckers that buy based on the name and dont do their research.

Whirlpool serviceman came out to see why our brand new dishwasher didnt dry the dishes and left pools of water on glass bottoms. Repairman said all the new dishwashers are like this. The heating elements do not heat hot enough so that the machine gets a higher efficiency rating. He said the solution is to use the dishwasher during the day and at the end of the cycle, open the door so the dishes air dry. My previous 24 year old GE dishwasher did a great job of drying the dishes even when we didnt use the heated dry cycle! The only reason we had to buy a new dishwasher is because we bought a new house. I am very disgusted with the Whirlpool dishwasher. Might as well do dishes by hand.

For many years, I have worked on and tested water heater thermocouples. I have a lot of experience with this. I have checked around many of the wholesale supply houses to find a simple part needed for this brand/manufacturer appliance. Johnstone Supply, a national wholesale distributor, Grainger, etc. cannot get these parts. You must call Whirlpool and wait on the phone and give the operator the full story about what you found and how you tested the water heater only to be told you dont know what you are talking about. I was told that if the pilot lights and stays lit for even several minutes, that it is not the thermocouple but the gas valve and they will not sell me the part and recommend either I purchase a whole gas valve assembly and revised thermocouple or they would not sell me anything.Then I got told that I am on a waiting list to be called for availability of the parts at some time within the next 24 hours. Or just buy a new water heater from us with a warranty. Really? This is why you should not even have wasted your time with these people and move on to a better future. I asked,Can I purchase a box of thermocouples for this type of water heater with a left hand thread? The answer to this was, No, we will need the serial # for each unit that has had any part put on it. Move on, I say. This was a big waste of time by me, the plumber, and my customers happiness.

The washer started to show error code for the door and washer would not restart. After removing the top of the washer and checking the door switch to see if there was a loose wire, I traced the wire back to the micro control unit, and upon inspection of the micro control unit, I found that the terminal that the door switch wire was attached to was loose and not making contact with circuit board.Although the washer is out of warranty being 7 years old, this is clearly not a part that is subject to wear and tear. The part was clearly manufactured poorly. I looked on the internet to purchase a new part but it seems that all micro control units are out of stock. This makes me wonder if one should start a class action suit as my part could be one of hundreds that was poorly manufactured. I called Whirlpool to see if they would send me another part to replace the bad unit but they said that because the washer was out of warranty, they could not help.

It is a double oven. Temp varies too much. The oven is very inconsistent. Cooking Thanksgiving the temperature would not stay even. It took much longer than intended. It was quite frustrating. I would not recommend the Whirlpool double oven.

So I have had the washer for a few years - bought it new or at least I thought. First came a clunking noise - fixed that. Next came the F1 code and installed a new pump $90 plus dollars. After installation, Im still getting F1 code and am now being told it is the ERC control board or water inlet valve either way a guessing game which in the end will have cost me over $400 to fix myself. I wish companies like this would stand behind their merchandise.

I bought this washer thinking it would last me for a long time. And now it wont wring out my clothes and I just wanted to say I am disappointed in my Cabrio Washer.

This product is very noisy. This product looks good, works okay, size is good but is very loud and overpriced. Probably would not buy again if I had to purchase another refrigerator.

Bought a whirlpool water heater less than two years ago and it has already failed. I could not find parts for it and was told by a lowes employee that I would have to call whirlpool on the 5th of July (three days away) to order any parts. I tried three plumbers in the Indianapolis area and they all told me that I would be better off replacing it with a different brand. I just put in a new rheem in its place. I will never buy another thing from whirlpool. They are no good.

In 2013 we thought that we bought a 30 cubic foot refrigerator model no. WRF989SDAM from Appliance Direct, Melbourne, FL. Months later we realized that it was only a 27 cubic foot unit. Two months after the warranty expired the unit started failing. Called the dealer and was told that they would have the service department to call us. Never heard from the dealer again. Finally I called an independent service company. After testing the unit the technician told us that the evaporator may be leaking. They offered to replace it for a price of nearly $500 with only a 90 day warranty. Realizing that it would work at least 90 days after the repair regardless if that was the problem or not.I decided that we did not want to spent that much money. Having refrigerator experience in previous years, I decide to add a piercing valve and adding refrigerant. Every few months I have to add refrigerant to keep the unit going. This unit has run nearly all time since the delivery. Corresponding with Whirlpool is somewhat like throwing a bottle in the ocean. I also noticed that Whirlpool has dropped the price of this unit quite a lot, must be to loss of customers. And yes I am 83 years old and handicapped and never had a problem like this to affect me so much.

I have a 4.5year old Cabrio washer. Ive replaced the water pump 3 times due to a weak plastic part which keeps blowing out due to pressure. Now, the unit is leaking rusty, black fluid from the bottom. I purchased it at HH Gregg in Indianapolis, In. Svs tech called. They have never seen this on such a new unit. Parts and labor will equal $400.00. Calling whirlpool customer care did nothing. I offered to pay the labor of $100, If they would be willing to pay for parts. Talked to a supervisor who offered to sell me an extended warranty costing $300.00. I am a stock owner in Whirlpool, no joy, dissatisfied with faulty product. They are unwilling to make this situation right. The unit is poorly made. I think a $800 unit should last longer than 4-5 years. In 2006, Whirlpool stopped offering a 5 year normal warranty on their units. Supervisor would not let me talk to anyone else.

I got a BRAND NEW Whirlpool from Habitat for Humanity. I registered it as a new product and was told it came from Lowes. Habitat only warranted it for 30 days but when it went out in 60 days, I called on the warranty. They sent out a repairman who said it was unfixable and after 2 weeks waiting to hear from them, Whirlpool said they would not honor the warranty because the serviceman said it had been dropped. I am a disabled senior citizen, I guarantee you I couldnt lift it long enough to drop it. Habitat said they didnt drop it and so did Lowes. Meanwhile, Whirlpool had the nerve to send me an extended warranty for the same refrigerator that they wouldnt honor the original warranty and they treated me like I was just trying to cheat them or something. The only thing I can do now is put it out in my driveway with a big sign on it to warn others NOT to buy Whirlpool products. Big deal.

2013 Whirlpool gold series stainless steel dishwasher, at that time it was their top of the line product, nice looking, stainless steel, stainless steel tub, very quiet. However this piece of junk does not stay fixed for more than a year, at best. I am a technician by trade albeit not on consumer appliances, I usually work on more complex multimillion dollar equipment; point being, I know my stuff.I have been throwing parts on this box like no tomorrow, Tub replaced, water director motor replaced, top railing replaced, small plastic pieces on top rack replaced. MTBF - Mean time before failure is 6-8 months and deteriorating over time. 2 issues are predominant symptoms of its failures, its either leaking or dishes dont get cleaned. I see the symptoms again and I am tired of fixing it so it going to the curb tomorrow. There is no way an expensive appliance like this (around 800$) can cost 100$ a year in parts to maintain (Note: parts only)... not to mind my labor and hassle ++ water damage to your cabinets. Stay away from Whirlpool and keep your sanity!

The product has water and ice maker problems. The day we got the new refrigerator home, it did not make ice for one week. I called and had service come out. The line was not connected properly under the refrigerator. Water was flowing out of the front of the refrigerator. I called service again and they put in a new ice maker. The ice maker was still not working. I called service and another firm came out and said the new ice maker was bad. They put in another new icemaker. Now it is making ice but will not dispense it through the door like it is supposed to. I will call service again on Monday.

I chose based on the current ratings of the machines. They look nice and they can handle large loads. I think EPA has changed wash machines to be back into the 1920s. I put my clothes in and there is no agitator in the center. My clothes come out twisted tightly into little round circles or balls, not much water but now it takes over an hour to wash my clothes. So we are conserving water but using more power, I also have to iron sheets and clothes because they are so twisted and wrinkled. I used to stick my clothes into the washer, select a cycle and go on my way and now I have to answer 5 other selection options, if I dont hold the button in long enough it just turns off.Have we all lost our minds, I think this is going backwards not forwards. I have talked to other women and they agree with me, we HATE these new washer and dryers. The dryer is a little better but not much. Also the tops are concave so your laundry basket falls off, and you cant put your soap on the dryer which is where I am used to having it. Now I have to clean my washer every 30 cycles, iron and it takes all day to do the laundry, yes and they call this progress, really!!! I purchased the Whirlpool Cabrio W10607 425A- SP and dryers Whirlpool W10680129C-SP, these are full size and have the steam options on them and are side by sides.

In a recent decision regarding the highly expensive, supposed elite performing Whirlpool Gold refrigerators, a group of unsatisfied Whirlpool owners who are tired of cleaning water puddles from in front of their new refrigerators have hired all automobile corporations to manufacture cars only available to the CEO, Executive Board as well as the entire engineering staff at Whirlpool.These cars will be guaranteed to run ok. However, once the car is heated up under normal working conditions, the cars will be guaranteed to leak oil all over whatever surface they are parked upon. We hope that this will not be an inconvenience to the CEO of Whirlpool; however, perhaps once you have destroyed your new garage floor, you will understand the nature of our complaint with your poorly designed and engineered Whirlpool product.While this letter will have no effect on my current defective product provided to me by Whirlpool, it makes me feel better and I have not had the attention span to listen to my wife complain while she is cleaning up yet another (whirl) pool underneath our fridge.

I’ve been struggling with this new washer since I bought it a year ago. It’s sold as a water saver machine, but it continually leaves white residue and lint on my dark clothes that will only come off if rewashed with no soap and no other clothes. The technician who came out ran a cleaner through the machine and that was it. It’s recommended that the cleaner be used once a month, but it doesn’t seem to do any good. Per the appliance dealer I’ve reduced the amount of detergent I use to a tablespoon. I still get the residue. Definitely not a water saver and a crummy washing machine. Don’t buy Whirlpool!

I am so frustrated with my Whirlpool Gold Wall oven with Accubake system. It has been on for 12 hours in clean mode. The door is locked. My home is full of smoke and even though I turned off the breaker so no power would go to it, it is still locked and hot two hours later. This is the second time this has happened. Not only is it a fire hazard, my walls are hot to the touch. It is frustrating. There is no override of the clean mode. BTW, I was baking when the inside light switched on and off and the door locked down. I was nowhere near it and it was the second batch I was baking so I did not touch the clean button. It did it itself.

I bought a Whirlpool built washing machine on Jan. 8, 14. It stopped working on Aug. 9, 14. It is now Sept. 2, 14 and I am still waiting for it to be repaired. I am age 75 and it is difficult to load and unload clothes to take them to the laundry. The repairman order a part Aug. 26. Pony Express has not deliver the part at this time.

The agitator is higher than any I have seen and when we washed aprons that have plastic buckles on them, they get stuck under the agitator. When complained their solution was to use laundry bags to wash 15 aprons in, they are long aprons. Paying a lot of money for the machine and it being commercial I didnt think we would not be able to use it. The whole machine shut down when three of the buckles got stuck. The washer is model # CAE2793BQ and I would suggest that no one purchase one of these machines.

Whirlpool Cabrio 6600 SW2 - Somehow a coin or two (?) are under the tub. It is not a high pitched sound. Just sounds like the machine is rubbing against the tub or something when it is being used. It does an excellent job of washing and spin drying the clothes, but the noise irritates my wife, which then irritates me. I took the top piece off and can see a coin DOWN there, but cannot reach it. Must I turn the machine upside down and try to shake the coin(s) out?

I have had my washer & dryer about 12 yrs. It has given me great service; however the spin mechanism on the washer stopped one month ago. It was replaced thru my home appliance warranty. I need the front loader style because Im disabled now, and cant take clothes out of washer. My previous set was Kenmore & it lasted 20 years. Looking to purchase in 2 months.

I purchased this range in 2010 and needed to replace the control panel/switch membrane in 2011 and it was covered by the warranty. Then I purchased an extended warranty and needed to replace the same part again. Then I replaced it again in July 2016. This part cost $147 and you cannot operate the oven without it. There is something wrong with the range that is causing the failure and the cause of the failure should have been fixed when it was under warranty but now that it isnt under warranty, Whirlpool has refused to correct the problem or compensate me for the cost to replace the part.

Its a very well build dishwasher. Its quiet, really do a deep cleaning and make it easier to leave the kitchen clean after dinner with 2 kids its something that I need, Its not pricey either like other brands.

Oven was just about 3 years old when the oven bake feature failed the first of many times! Display says fault detected. Was able to get oven cleaning done and then it worked again but eventually has failed repeatedly since. Further reading and support from technicians has revealed its an oven control issue and replacement part is same cost as new oven! Apparently the oven control Whirlpool designed and installed cant handle heat!?? Very unreliable and would never buy their appliances again!

I decided to buy the Cabrio. It was the most expensive, but I wanted to buy American, and I liked the set. It does not do great with cleaning the clothes and they smell when they come out of the washer. Do you have any suggestions. It does not fill with enough water even when using the deep water mode. Please help as I would not recommend this. I called Lowes where I bought it, and they said they knew, but are not recalling, or making any adjustments until Whirlpool does.

I purchased a Whirlpool washer 7 months ago, and a month ago, it broke. I have been without my washer for 1 month, and it has been repaired 4 times in that month. It is still not working. All I get is that, its under warranty, and there isnt anything they can do, but to keep trying to fix it. I have been having to take my clothes to a laundromat, and pay to have them washed. I have asked for them to deem it defective, but they refuse.

I purchased this Refrigerator Model #wrb322dmb, bottom freezer, 21cu ft. last year on July 3, 2015. In September I noticed rust spots on the top door. I called Home Depot where I purchased and they directed me to Whirlpool. I did purchase an extended warranty with Home Depot. Whirlpool did replace the top door. Thought that took care of it. Today one year and two weeks out of warranty, I again notice rust on both doors. Called Whirlpool. They said too bad out of warranty, not considering I had a previous report of this very same issue. So since I am very unsatisfied with this result and the fact that an expensive product is rusting, I decided to share to try to prevent someone getting stuck. Stainless steel is not supposed to rust which leads me to believe that it is not Stainless steel, but a Stainless Steel finish and not a very good one. So I am stuck with a rusting $1200.00 refrigerator only after one year. I have always purchased Whirlpool, but no more. They lost a 40-year customer. I have always bought American made but no wonder people are not buying American made any longer. TO SUM IT UP WHIRLPOOL STAINLESS STEEL APPLIANCES RUST! DO NOT BUY!

Bought side by side in 2010 and after the first 3 mth the ice maker jammed up. Found out the dispenser door was not working right so it was change. But lo and behold the dame thing jammed up again within 3 weeks and the door is working. I will never buy WHIRLPOOL AGAIN. I hope they go out of Business. They are selling junk and they do not care. Made in American. Pack your bags Whirlpool. You are no longer needed.

March 18, 2018. I was called today to inform me that the right front burner on my new stove Model # WEG745H0FS0 (ordered in early September and not delivered until mid-October from Menards) was not operating properly. The flame was noisy and yellow. I inspected it and found that the front burner base was substantially damaged by heat. See photo (Whirlpool stove part damage1). On inspection of the other front burner base, I discovered early signs of the same problem. (Note changes on burner base on the left of the photo.)In this photo (Whirlpool stove part damage2.JPG), you can see the damage to the burner base and also see some changes on the 3 to 5 O’clock position on the burner base on the left of the photo. This stove is less than 6 months old. The fact that the burner parts can be melted indicate poor design and danger to the owner/operator of the stove. Further, the operators manual for the stove I bought does not include any information on the model I have. It has pictures of the range top similar to mine but the model number is completely different. In addition to this, the Aqua-Lift Technology for cleaning the oven is completely ineffective. This is noted in several other reviews of this equipment. The problem noted by the other review became obvious the very first day I tried to use this range. A 2 cup pot spilled all over the cooktop as soon as I put it on the grate.

I have the same problems as the ones listed in complaint section. I bought 4 Whirlpool products at the same time: refrigerator, stove, and the Whirlpool duet. Washer is a front loader. We have had nothing but trouble. The company we bought the machine from exchanged the washer for the same model because the electrical was bad and the parts to replace were back ordered for more than 3 months. We are now having problems with the exchange washer. This time it is the same as the engineer remarked in his complaint the bearings are bad and it sounds like a jet taking off. It’s that loud.I went down to the place of purchase and I am in the process for the repair. I have a feeling this will not end well. Whirlpool, if you call them, gives you a run around or tells you they dont have you listed in there computer. We dont have the money to replace any of this. This new machine is only 9 months old. Whirlpool is making a killing off of fixed income people and the working class. You tell me who can afford the cost of that kind of repair or the cost of a new machine that only works for a couple of months. Why is 60 Minutes not on them like a bad smell?

Front load is terrible. Doesnt wring clothes thoroughly. Runs for 1 hour on fastest cycle. A HUGE WASTE OF ENERGY! NOT A GOOD MACHINE!!! Our clothes are wet always after the spin cycle. It also doesnt do small throw rugs. Awful!

I had an electric 36 Whirlpool, smooth top cook top for 18 yrs. Worked great, cleaned with Windex and occasional scraper. Didnt show streaks or spots. I remodeled my kitchen 10/15 and bought a KitchenAid 36 glass smooth top vented cook top. What a piece of junk. Wish I had kept my Whirlpool. I can not get it cleaned. Every little fingerprint, mark, etc. shows. I thought KitchenAid was an upgrade to whirlpool but I was surely wrong. I am glad that I didnt change my built-in double oven. I did change out the Whirlpool quiet gold dishwasher for the KitchenAid. Again, wish I kept my Whirlpool. The KitchenAid is noisier, looks terrible with the stainless inside. Im embarrassed to open it with all the water stains. My Whirlpool was white inside and looked like new. I wish I had the money to change it back but I dont unfortunately. Moral of the story is if it aint broken dont fix it!

Whirlpool water heater FG1F5040T3NOV - I noticed that when I was taking a shower, my hot water wasnt working. I went downstairs and the pilot light on my water heater wasnt on. I tried to restart it. The pilot light wouldnt work or relight. I gave up and contacted a plumber. I dont feel I should have to pay for a plumber when its a product flaw!

Stainless steel side-by-side refrigerator (4 yrs. old) - I have to continually clean the rust stains. Ive used the products Whirlpool has suggested and the rust continues to appear. Lowes extended warranty does not cover this problem because it is cosmetic; Whirlpool reps say its due to the coastal area where I live and that they cant do anything about it! I understand that there are many customers experiencing the same problems with Whirlpool products. Their customer service is worthless and is their warranty to stand behind their products!

I purchased a gas hot water heater from Whirlpool. I have had problems with it since it was new. Whirlpool kept sending repair parts, which I installed, until the warranty expired. Now they say “Sorry Charlie, the warranty has expired.” The water heater has never been fixed. They just dragged it along until the warranty expired. Whirlpool has no complaint department or the repair place will not give it to you. They told me there would be no use for a complaint department. They would just tell the same thing the repair was telling me.

I purchased a Whirlpool Cabrio in 2009. It worked so-so over the years but recently stopped completing cycles, citing false load balance errors and leaving towels and sheets sopping wet at the end of a cycle. Three repair appointments later, and still no success. I am thoroughly disgusted that such an expensive machine only lasts four years. Based on the service techs attitude toward the machine and other consumer comments, Im guessing I will have to replace it. You can guess it will not be with a Whirlpool machine!

Bought this new in Oct 2012. A week back stopped working. After a week found out it needs new compressor and will cost 1,096.00. Paid 2,100 for this new and now need to buy another fridge but not this make.

Tried to do a small 2x3 bathroom rug and the spin was thrown off kilter. I have been doing laundry a long time and I know how to evenly distribute clothes etc so the washer should be able to handle it for the price I paid. The high end front loading Whirlpool set.

Every time I wash clothes, I get a terrible odor that permeates my home. Ive put in afresh to rid the problem. Ive had a technician take it apart to clean the filter & hose. Nothing helps!! My clothes come out smelling like the sewer. I called the company, and the person I talked to had no real solutions either. Im MAD! What are you planning to do about my stinking problem? Im washing clothes right now & have to have all doors open & fans on high!!!

Our Whirlpool refrigerator, model MODGI5FSAXVYO, began leaking water from the freezer onto the floor about 3 months ago. We purchased the unit in January 2011. We had to keep a towel on the floor to absorb the moisture. Our troubles began after the freezer door was left ajar and the interior became quite frosty. We had turned off the freezer several times to defrost but nothing helped until this morning when I read the comments of Marea of McClellanville, SC and Ruth of Vavenby, BC.I then decided to begin exploring taking apart everything until I reached the freezer unit in the back of the freezer. I discovered a lot of ice with the ice blocking the drain hole which is supposed to drain condensation from the freezer fins to a drain pan in back of the freezer. Apparently, leaving the freezer door ajar caused the drain hole and surrounding area to ice up. Condensation from the fins would keep dripping until it overflowed onto the bottom of the freezer until it filled up with ice. The water then had nowhere to go but out of the freezer onto the floor. The simple solution to this problem is to turn off the fridge, empty out the freezer and allow the frozen drain hole to thaw out. You can easily remove the back panel of the refrigerator to see if water is then draining into the drain pain. Good Luck! Ed

I purchased Whirlpool washer in 12/2011. Immediately, I noticed the noise and called service. It was a whistling noise. The clerk told me nothing was in the manual and it would cost $65 to have a tech come out. He advised me to wait until it was louder and more consistent. I called again when it was. Gear case was replaced on 5/2/2012 five months after purchasing the machine. I called Whirlpool again in 5/2013 - same problem. I was told the diagnostic call would be $95, labor which is extended for a major job is $85 and the part would be $290. It would cost $470 to repair as the gear case was guaranteed for only three months. This machine is a lemon since the gear case is now shot again prior to the machine being 1-1/2 yrs. old. I called Whirlpool and spoke to Amy (Esc. Sup.) who advised they would replace the part only. The appointment was scheduled; the tech came, did diagnostics reading a manual and said the gear case is shot. I inquired, Well, you are going to fix it today right? The reply was, Oh no, it has to be ordered and its a two-man job. When I arranged for this appointment, this was clearly explained and what I was expecting, two men and the part to be replaced with them. Now its a five-day wait to get the part and then a scheduling issue when they could do it. This machine is a lemon and Id like to have the machine replaced or my money refunded. This is a runaround, scheduling the appointment and having someone show up with the manual and having no parts and not knowing that it was the part which broke again from previously being replaced.

This is a good looking, inexpensive stove/oven. Stove top has four burners. I liked the split grates on the stove top. Its easier to remove and clean. I do not like the rubber seal on the oven door. I am used to the heavier duty seals on most oven doors.

My wife and I purchased a new Whirlpool Cabrio Washer / Dryer set approximately three years ago and have had nothing but problem after problem with these units. Weve had multiple service calls, multiple parts replaced, and after dumping hundreds of dollars into repairs and service calls (even called Whirlpool and asked for some help with parts cost but was given the cold shoulder and was told, We cant help you), we are dumping these machines where they belong - scrap heap. I will never purchase another Whirlpool product and will tell anyone who will listen what garbage Whirlpool manufacturers are and absolutely pathetic excuse for customer service and the poorest of quality product. Whirlpool will never be in my familys home again and will never see another cent of my monies.

We purchased this machine new less than 6 months ago. We found that it is not cleaning our jeans. We cant even work cattle and get our jeans clean. I called Sears and Whirlpool and told them it does not clean our jeans. They said it was under warranty and that they would come out to see if it was working properly. Well they said it was and then sent us a bill for $77. They said Customer Instruct was not covered under warranty. I already read the instructions and I knew how to operate this machine. The technician said this is not the first time he has had this type of complaint. Anyway I am VERY dissatisfied with this washing machine and I want Sears and Whirlpool to take it back and give me a better machine. I want one that can get clothes clean. If you are satisfied with dirty clothes then I guess you will like this machine.

WRF989SDAB00 - Our house burnt down in April 2012. We purchased all Whirlpool products to be put back into our house. We had to purchase these items in November 2012 so the contractor could get them into our house because of the cabinets. We did not move into our house until the last week of December and could not use these items until then. In December of 2013, our freezer went out along with the ice maker. I had to fight for Whirlpool to pay for these repairs. They kept saying that it was over the one year warranty. They did accept responsibility and paid for A&E to come look at the frig. One guy came out the first time and thought he fixed it. No. A month later two guys came out. They said it was the condenser. They ordered the parts and came back a third time to replace it. A month and a half later, same problem. A&E came out a fourth time and thought they fixed it again. Nope. During this period, I purchased a extended service plan. I AM TELLING EVERYONE TO DO THIS NOW BECAUSE IT TAKES 60 DAYS FOR THIS PLAN TO TAKE EFFECT. Now the service plan people sent a different company out and he said it is going to cost a lot of money because the things that need to be replaced. The plan SHOULD cover all of this. I called both the service company and Whirlpool demanding that they send us a replacement frig. I believe sending someone out at least SIX TIMES to fix the same problem is ridiculous. Each company is blaming the other and each is saying its the others responsibility to replace the frig.

In 2006, I paid $1,300 for above fridge and bought extended warranty. Within a year, I had four service calls for condensation in bins that causes freezing of lunchmeat, veggies, etc. and anything put in them. The A&E service company said to use plastic bags and then said I should keep the bin drawers open at an inch so air could flow. Next call said vacuuming underneath would solve it. Final call said again to use bags and suggested modifying the fridge by making a hole in the sidewall (which would nullify the warranty).Since I declined modifying the fridge, he contacted Whirlpool saying I declined service. I still have this problem, was going to call for service because I could really use the space the drawer provides but I have a feeling I will just be throwing money away. I was going to contact Whirlpool but Ive done that too. I feel totally ripped off on an item that should have quite a few years of service left.

My last fridge leaked all over the floor. Mice were living in it also roaches. My landlord didnt believe me though Ive shown him several times. He didnt want to spend the money. Luckily his wife came over and saw how bad it was so she got a new refrigerator for me and it has been a blessing ever since. It is just the right size for my apartment.

After being a faithful Whirlpool consumer for years... I no longer have any faith. I purchased an entire kitchen suite. The side by side refrigerator Nov 2013. The first refrigerator was delivered with the side cabinet deeply dented in several areas. Another was delivered 4 weeks later. Silly me... I thought, Okay, no big deal... what could go wrong? I didnt take time off work again to receive the replacement. My son took delivery (never looked at it). I get home... the front of both doors looked like they had been kicked in all the way across! To add, the cabinet sides were textured (not smooth like what I ordered) and the door handles didnt match the other appliances. So, I called HDepot & called Whirlpool (only to be on the phone an hour each time due to high call volume. Imagine?). Then Whirlpool reps are talking to me like I am some sort of idiot... saying that the refrigerator was EXACTLY the same... not possible that the handles or sides were different!!! Because it was damaged (and I mean ridiculous! ) another 8 weeks for a replacement. Frig #3 arrives and I take time off to receive it. Ah, the right refrigerator... but again ~ handles dont match. Not POSSIBLE.. Ms. _ _ _ _... it is the exact refrigerator, those are the same handles. Hours and hours on the phone to HDepot and Whirlpool. Finally, HDepot rep has a WP rep at the store when I call, and bingo! Oh yes, there are two styles of the Exact same model. The handles are ordered... 10 weeks later I finally have matching handles! But, wait... gets better. The fridge has been loud from the start, CONSTANTLY running but, not cooling some areas and freezing in others. Then when you open the freezer it is like a burst of winter wonderland is unleashed in your face. There are sheaths of ice building up on the top of the inside door. Hmm, I think what is going on? The Whirlpool designated repair company comes out. Ah, well here is part of your problem. When the refrigerator was being put together they left a few thicknesses of blue packing tape between the door and the rubber seal in the freezer. The rep tried to fix it to no avail because the door was also warped. First they were going to replace the door. Waiting for another 10 weeks. Nobody calls, whats going on? Oh, never mind, or rather... that was never happening. I have spoken to many reps with Whirlpool, I have been polite with all. In turn, from most I get curt hard ball back. The offers to resolve this from Whirlpool have been ridiculous. I am sorry for my loyalty to Whirlpool, as it has not been reciprocated. I have had two more deliveries - both the wrong unit! I never thought there were others out there. What a mess. They should recall.

I have had the machine pair (Whirlpool Cabrio Platinum) for almost 4 years and up until a few months ago I LOVED the washer. I was advised when I bought the machine to make sure to read the manual, which was very helpful in learning to use it properly. I have never had residue on my dark clothing or ever had the clothes come out partially dry. I use liquid HE detergent nothing powder goes in the machine. I also read many reviews before buying it and a got some advice from them. I have washed king size comforters with no problems. Everything has always cleaned very well. The only issues I have are that when bleach was used in a previous cycle. Ive had a problem with the bleach not being fully dispensed and ending up in the next load. Fortunately it was just towels and not darks!!! Although, I had just bought the towels and now they look tie died which was very upsetting to me. I learned to add water to the bleach dispenser to dilute it and that issue seemed to dissipate. BUT NOW... I COULD THROW A TANTRUM. I PAID 1800+ FOR THE PAIR AND THE WASHER IS SHOT!!! A pretty common problem with the Cabrio from what Ive read. It started by making a very loud noise when spinning, like a helicopter was landing in my laundry room! I continued using it, I even thought the sound was getting better after I did the clean cycle. The last load I did would not complete the cycle because it kept reading that it was unbalanced and unfortunately it was a load of heavy wet towels. I was far from happy when I had to remove them and go to a Laundromat. Needless to say its the bearings and to fix its very costly. I cant even fathom that a less than 4 year old machine needs to be repaired and the cost is roughly half of what I paid for it!!! I do know I will NEVER buy another Whirlpool. What happened to making things to last??? Next machine I will definitely get extended warranty. I can honestly agree with all the other reviews... THIS MACHINE IS HORRIBLE!!!

I rent a condo unit and hardly use the microwave. It is nice to have. Never had one over the stove and it came with the unit, so I gave mine away. After living here for 3 years I am now moving to another city 5 hours away. I noticed the other day when I went to melt butter for popcorn, the door crack, which I noticed the second year we lived here, has gotten worse. Not just worse, but the handle looks like one pull and its completely broken. My landlord expects us to pay for this. I am reading and I see that its from the heat from the stove, which is also a Whirlpool product, is to blame, not the user. How is this right, how is this fair?? When we move we will have to buy a new microwave, that will sit once again on my beautiful microwave cabinet and I promise, it WILL NOT be a Whirlpool!!!

Love my Whirlpool stove and I just bought a Whirlpool French door fridge. I also have a Whirlpool washer and dryer and I am very happy with the way they work and look. I replaced my Tappan stove that I had for quite a while and it was a good stove but I am very happy with my Whirlpool stove, it not only works great but it looks great.

Bought Sep. 2012. April 2016 stopped cooling. Four visits over 4 weeks, various parts replaced, coolant refilled. Stopped cooling again soon after first 3 visits. After 4th visit cooled moderately (42 degrees) for 5 weeks. June 24, renewed service contract for 1 year for $112. July 12, stopped cooling! Took 8 days for service person to arrive; 5 days for him to tell Whirlpool that repair needed 5 parts, one of which is no longer made! But they sold me a service contract?? 16 days after initial call, Whirlpool says my case is in adjudication, which will take 7-10 business days. So I wont know what they are offering till Aug. 8th-11th. Four weeks living out of a cooler. The product is rotten, and the service is worse.Just recently discovered that all this time when I thought I was talking to Whirlpool, it was actually sub-contracted to AIG. Yes, the AIG that needed a massive government bail-out. Whirlpool customer service refused to talk to me; referred me back to AIG. The only other all-refrigerator (no freezer - I have a 20-year-old Sears freezer in the kitchen that works just fine) I can find is an inch too tall for the space. But I plan to spend for my handyman to raise the cupboard floor above, rather than buy another Whirlpool! Most of May, four weeks in July/Aug without a fridge. Hours on hold. The first service firm they used was incompetent, couldnt find the cause. I wonder how much of my $1,353 purchase cost, and my $112 service contract theyll refund?

Update: My water heaters pilot light would not stay lit. After seeing the large number of similar complaints on this site, I contacted Whirlpool and asked whether they would cover the cost of labor in addition to the parts, which were under warranty. The representative was very understanding and agreed. The thermocoupler and gas valve were replaced a few days ago. It seems to be working fine. Additionally, a representative contacted me directly in response to my Consumer Affairs complaint, not knowing I had already gotten approval for the repair. He wanted to make sure I received the help that I needed and called to follow-up after the repair. Im very pleased with the response.

I absolutely hate this Cabrio machine. This should be off the market. Shame on them for selling this. Salesman sold me a bill of goods on this washer and dryer. I have to wash some clothes 3x or hand wash. Whirlpool told me to use bulky or delicate cycles, as this puts more water into the machine so my clothes will rinse clean (doesnt work). When I wrote, they didnt even offer to make a service appointment. They know they have a bad product! I agree. Greed.

I have the 4.3 cu. ft. washer. This washer worked OK, but the lid lock does fail after about one year if the washer is in an environment where moisture may be present.I noticed the lid lock not working all the time about two months before the warranty expired. If this happens, call the warranty department immediately. After checking the ground wire and resetting the washer power over and over again, the lid lock finally stopped working completely. Here is how to fix it:There are two screws on the back of the top portion of the washer. Unscrew them from the silver straps. The washer lid will now push forward and up and off. Prop it up with a stick.Unscrew the two screws on the lid lock and start taking it apart (after reading this entire review). Be careful not to lose any parts and be sure to know where everything goes for re-assembly. Take pictures if necessary. Take the lid lock completely apart including any small pieces.The plastic slide needs to be cleaned. It has a spring that may fall when you pull it apart.The metal contact points inside the lid lock mechanism need to be cleaned. Be extremely careful when pulling the red cover off of the housing assembly. Pull the four metal contact points completely out of the plastic assembly. Be real careful with the black plastic slide piece, the metal rocker switch and the switch actuating motor. Use a small file and rubbing alcohol to clean off any green or white corrosion. Make sure to check all contact points.Re-assemble and you will immediately notice the lock switch working better. Re-install onto the machine. Re-install the upper portion of the washer. Start your laundry. Repeat after one year or when the lid lock becomes faulty again. These points should have been made out of a less corrosive material. Poor craftsmanship. Would not recommend.

This is a freezer on top unit. Purchased in 2015, unit quit cooling, started making a roaring noise. Called local technician, he added 2 oz of Freon, said he has seen many of these same unit losing Freon. Technician said line that goes to compressor is copper and hooks up to aluminum line before attaching to compressor. This is leak point for freon; no way to know when the leak started, but freon almost gone and cost to pressure check for source of leak is costly and probably would not repair problem. Got 6 yrs out of it and I am replacing with another brand. Will never buy Whirlpool again. Should have got 10-12 yrs of use. Do not buy this unit. Wrote Whirlpool first, but no help. Indicated this could be a problem with these units but no recall so I am on my own. Out $900 for a new refrigerator. Big hassle. Unit no good.